ARTICLE IN ACADEMIC JOURNALS
NO | DETAILS OF ARTICLE IN ACADEMIC JOURNALS |
---|---|
1. |
Investigation of inerter-based suspension systems for heavy vehicles (vol 18, e0280290, 2023)
2023
Source :
PLOS ONE
DOI :
10.1371/journal.pone.0286178
|
2. |
Design and Characterization of a Non-Linear Variable Inerter in Vehicle Suspension System
2023
Source :
International Journal of Integrated Engineering
DOI :
10.30880/ijie.2023.15.03.021
|
3. |
Investigation of inerter-based suspension systems for heavy vehicles
2023
Source :
PLOS ONE
DOI :
10.1371/journal.pone.0280290
|
4. |
Rollover Investigation of Two-Axle Heavy Vehicle Based on Load Transfer Ratio with Vehicle and Road Condition: A Simulation Approach
2023
Author(s) : Rahizar Bin Ramli, Ahmad Saifizul Bin Abdullah Source :
International Journal of Automotive and Mechanical Engineering
DOI :
10.15282/ijame.20.3.2023.06.0820
|
5. |
An improved gated convolutional neural network for rolling bearing fault diagnosis with imbalanced data
2023
Author(s) : Rahizar Bin Ramli Source :
International Journal of Hydromechatronics
DOI :
10.1504/IJHM.2023.130520
|
6. |
Effect of Carbonyl Iron Particle Types on the Structure and Performance of Magnetorheological Elastomers: A Frequency and Strain Dependent Study
2022
Author(s) : Rahizar Bin Ramli, Sabariah Binti Julai @ Julaihi Source :
Polymers
DOI :
10.3390/polym14194193
|
7. |
Effect of Carbonyl Iron Particle Types on the Structure and Performance of Magnetorheological Elastomers: A Frequency and Strain Dependent Study
2022
Author(s) : Rahizar Bin Ramli, Sabariah Binti Julai @ Julaihi Source :
POLYMERS
DOI :
10.3390/polym14194193
|
8. |
Effect of Carbonyl Iron Particle Types on the Structure and Performance of Magnetorheological Elastomers: A Frequency and Strain Dependent Study
2022
Author(s) : Rahizar Bin Ramli Source :
Polymers
DOI :
10.3390/ polym14194193
|
9. |
Development of a Performance-Enhanced Hybrid Magnetorheological Elastomer-Fluid for Semi-Active Vibration Isolation: Static and Dynamic Experimental Characterization
2022
Author(s) : Rahizar Bin Ramli, Sabariah Binti Julai @ Julaihi Source :
MATERIALS
DOI :
10.3390/ma15093238
|
10. |
Development of a Performance-Enhanced Hybrid Magnetorheological Elastomer-Fluid for Semi-Active Vibration Isolation: Static and Dynamic Experimental Characterization
2022
Author(s) : Rahizar Bin Ramli, Sabariah Binti Julai @ Julaihi Source :
Materials
DOI :
10.3390/ma15093238
|
11. |
Development of a Performance-Enhanced Hybrid
Magnetorheological Elastomer-Fluid for Semi-Active Vibration Isolation: Static and Dynamic Experimental Characterization
2022
Author(s) : Rahizar Bin Ramli Source :
Materials
DOI :
10.3390/ma15093238
|
12. |
A REVIEW OF AUTOMATIC MUSICAL INSTRUMENT CLASSIFICATION BASED ON SOUND RECOGNITION SYSTEM
2022
Source :
Canadian Acoustics - Acoustique Canadienne
|
13. |
Magnetorheological Elastomer Based Flexible Metamaterials Coupler for Broadband Longitudinal Vibration Isolation: Modeling and Experimental Verification
2021
Author(s) : Rahizar Bin Ramli, Sabariah Binti Julai @ Julaihi Source :
IEEE ACCESS
DOI :
10.1109/ACCESS.2021.3134267
|
14. |
The effect of vehicle and road conditions on rollover of commercial heavy vehicles during cornering: A simulation approach
2021
Author(s) : Rahizar Bin Ramli, Ahmad Saifizul Bin Abdullah Source :
Sustainability (Switzerland)
DOI :
10.3390/su13116337
|
15. |
Magnetorheological Elastomer Based Flexible Metamaterials Coupler for Broadband Longitudinal Vibration Isolation: Modeling and Experimental Verification
2021
Author(s) : Rahizar Bin Ramli, Sabariah Binti Julai @ Julaihi Source :
IEEE ACCESS
DOI :
10.1109/ACCESS.2021.3134267
|
16. |
Statistical Assessment on Defect Reporting System of High-speed Marine Diesel
2021
Author(s) : Ahmad Saifizul Bin Abdullah, Rahizar Bin Ramli Source :
NAVAL ENGINEERS JOURNAL
|
17. |
Handling performance criteria evaluation for vehicle suspension system with semi-Active control strategies
2021
Source :
International Journal of Advanced Mechatronic Systems
|
18. |
Composite Optimization of Automotive Carbon Fiber Strut Bar Using Hyperworks Optistruct
2021
Author(s) : Rahizar Bin Ramli Source :
Journal of Physics: Conference Series
DOI :
10.1088/1742-6596/1793/1/012072
|
19. |
The Effect of Vehicle and Road Conditions on Rollover of Commercial Heavy Vehicles during Cornering: A Simulation Approach
2021
Author(s) : Rahizar Bin Ramli, Ahmad Saifizul Bin Abdullah Source :
SUSTAINABILITY
DOI :
10.3390/su13116337
|
20. |
Safety assessment and accident prediction on expressways using vehicle dynamic simulation technique
2020
Source :
International Journal of Scientific & Technology Research
|
21. |
Assessment of characteristics of acoustic emission parameters for valve damage detection under varying compressor speeds
2020
Author(s) : Rahizar Bin Ramli, Ahmad Saifizul Bin Abdullah Source :
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
DOI :
10.1177/0954406220915232
|
22. |
Degating of AlSi10Cu2Fe High-Pressure Die Casting Component Using Resonance Vibration Technique
2020
Author(s) : Rahizar Bin Ramli Source :
INTERNATIONAL JOURNAL OF METALCASTING
|
23. |
Detection and estimation of valve leakage losses in reciprocating compressor using acoustic emission technique
2020
Author(s) : Rahizar Bin Ramli Source :
MEASUREMENT
DOI :
10.1016/j.measurement.2019.107315
|
24. |
Handling performance optimisation for formula vehicle using multi-objectives evolutionary algorithms
2020
Author(s) : Rahizar Bin Ramli Source :
VEHICLE SYSTEM DYNAMICS
DOI :
10.1080/00423114.2019.1645861
|
25. |
Multi-objective optimization of all-wheel drive electric formula vehicle for performance and energy efficiency using evolutionary algorithms
2020
Author(s) : Rahizar Bin Ramli Source :
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING
|
26. |
Detection and estimation of valve leakage losses in reciprocating compressor using acoustic emission technique
2020
Source :
Measurement: Journal of the International Measurement Confederation
|
27. |
Degating of AlSi10Cu2Fe High-Pressure Die Casting Component Using Resonance Vibration Technique
2020
Author(s) : Rahizar Bin Ramli Source :
International Journal of Metalcasting
|
28. |
Detection and estimation of valve leakage losses in reciprocating compressor using acoustic emission technique
2020
Source :
Measurement
|
29. |
Assessment of characteristics of acoustic emission parameters for valve damage detection under varying compressor speeds
2020
Source :
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
DOI :
10.1177/0954406220915232
|
30. |
Reciprocating compressor valve damage estimation under varying speeds through the acoustic emission technique
2019
Source :
International Journal of Structural Integrity
DOI :
10.1108/IJSI-03-2019-0024
|
31. |
Degating of AlSi10Cu2Fe high-pressure die casting component using resonance vibration technique
2019
Author(s) : Rahizar Bin Ramli Source :
International Journal of Metalcasting
|
32. |
Multi-objective optimization of all-wheel drive electric formula vehicle for performance and energy efficiency using evolutionary algorithms
2019
Author(s) : Rahizar Bin Ramli Source :
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
|
33. |
Handling performance optimization for formula vehicle using multi-objectives evolutionary algorithms
2019
Author(s) : Rahizar Bin Ramli Source :
Vehicle System Dynamics
|
34. |
Determination of Flow Patterns in Vertical Upward Two-Phase Flow Channel via Void Fraction Profile
2019
Author(s) : Mohd Zamri Bin Zainon @ Baharom, Rahizar Bin Ramli Source :
Journal of Applied Fluid Mechanics
DOI :
10.29252/jafm.12.02.28351
|
35. |
Determination of Flow Patterns in Vertical Upward Two-Phase Flow Channel via Void Fraction Profile
2019
Author(s) : Mohd Zamri Bin Zainon @ Baharom, Rahizar Bin Ramli Source :
JOURNAL OF APPLIED FLUID MECHANICS
|
36. |
Ride improvement of vehicle suspensions with switchable inerter based on force cancellation strategy
2017
Author(s) : Hazlee Azil Bin Illias, Wong Jee Keen Raymond Source :
Journal of Vibroengineering
|
37. |
Identification of Diesel Engine Defects of Corvette Type Naval Ships
2017
Author(s) : Ahmad Saifizul Bin Abdullah, Rahizar Bin Ramli Source :
International Journal of I.C. Engines and Gas Turbines
|
38. |
Between simplicity and accuracy: Effect of adding modeling details on quarter vehicle model accuracy
2017
Source :
PLoS One
|
39. |
A new multi-objective optimization method for full- vehicle suspension systems
2016
Author(s) : Ahmad Saifizul Bin Abdullah, Rahizar Bin Ramli Source :
Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering
DOI :
10.1177/0954407015611522
|
40. |
Using magnetic field analysis to evaluate the suitability of a magnetic suspension system for lightweight vehicles
2016
Author(s) : Rahizar Bin Ramli, Wan Nor Liza Binti Wan Mahadi Source :
Turkish Journal of Electrical Engineering & Computer Sciences
DOI :
10.3906/elk-1502-229
|
41. |
Topology Optimization: A Review for Structural Designs under Vibration Problems
2016
Author(s) : Sajjad Zargham, Rahizar Bin Ramli, Thomas Arthur Ward Source :
Structural and Multidisciplinary Optimization
DOI :
10.1007/s00158-015-1370-5
|
42. |
Impact of aluminium addition on the corrosion behaviour of Sn1.0Ag0.5Cu lead-free solder
2015
Author(s) : Mohd Faizul Bin Mohd Sabri, Azuddin Bin Mamat, Rahizar Bin Ramli, Azizah Binti Mainal, Suhana Binti Mohd Said Source :
RSC Advances
|
43. |
New method for distance-based close following safety indicator
2015
Author(s) : Mohamed Rehan Bin Karim, Ahmad Saifizul Bin Abdullah, Rahizar Bin Ramli, Airul Sharizli Abdullah Source :
Traffic Injury Prevention
|
44. |
Impact of aluminium addition on the corrosion behaviour of Sn 1.0Ag 0.5Cu lead-free solder
2015
Author(s) : Rahizar Bin Ramli, Mohd Faizul Bin Mohd Sabri, Azuddin Bin Mamat, Suhana Binti Mohd Said Source :
RSC Advances
|
45. |
Parametric modelling of flexible plate structures using continuous ant colony optimization
2015
Author(s) : Sabariah Binti Julai @ Julaihi, Rahizar Bin Ramli Source :
Journal of Simulation
|
46. |
Analysis of the kinematics and compliance of a passive suspension system using Adams car
2015
Author(s) : Sulaiman Wadi Harun Source :
Journal of Mechanical Engineering and Sciences
|
47. |
Effect of thermal aging on the electrical resistivity of Fe-added SAC105 solder alloys
2015
Author(s) : Iswadi Bin Jauhari, Rahizar Bin Ramli, Hamzah Bin Arof, Mohd Faizul Bin Mohd Sabri, Suhana Binti Mohd Said Source :
Microelectronics Reliability
|
48. |
Microstructure of Sn 1Ag 0.5Cu solder alloy bearing Fe under salt spray test
2014
Author(s) : Rahizar Bin Ramli, Mohd Faizul Bin Mohd Sabri Source :
Microelectronics Reliability
|
49. |
Microstructure of Sn-1Ag-0.5Cu Solder Alloy Bearing Fe Under Salt Spray Test
2014
Author(s) : Nor Ilyana Muhd Nordin, Nik Nurul Syazana Ibrahim, Rahizar Bin Ramli, Suhana Binti Mohd Said Source :
Microelectronics Reliability
|
50. |
Microstructure of Sn-1Ag-0.5Cu solder alloy bearing Fe under salt spray test
2014
Source :
Microelectronics Reliability
|
51. |
Ride evaluation of vehicle suspension employing non-linear inerter
2014
Author(s) : Soong Ming Foong, Wan Nor Liza Binti Wan Mahadi, Rahizar Bin Ramli Source :
Applied Mechanics and Materials
|
52. |
Simulation and analysis on the effect of gross vehicle weight on braking distance of heavy vehicle
2014
Author(s) : Rahizar Bin Ramli, Ahmad Saifizul Bin Abdullah Source :
Applied Mechanics and Materials
|
53. |
Empirical investigation of acoustic emission signals for valve failure identification by using statistical method
2014
Author(s) : Sim Hoi Yin, Ahmad Saifizul Bin Abdullah, Rahizar Bin Ramli Source :
Measurement
|
54. |
Implementations of PID Controller and its transient behaviour in active suspension system
2014
Author(s) : Wan Nor Liza Binti Wan Mahadi, Mohd Azman Zainul Abidin, Zainab Rasol, Noor Hafizah Amer, Rahizar Bin Ramli Source :
Advanced Materials Research
|
55. |
An investigation on safety performance assessment of close- following behavior of heavy vehicle using empirical simulation technique
2014
Author(s) : Airul Sharizli Abdullah, Mohamed Rehan Bin Karim, Ahmad Saifizul Bin Abdullah, Rahizar Bin Ramli Source :
Journal of Transportation Technologies
|
56. |
Identification of vehicle suspension parameters by design optimization
2014
Author(s) : Rahizar Bin Ramli Source :
Engineering Optimization
|
57. |
Vehicle suspensions with parallel inerter: Effectiveness in improving vibration isolation
2014
Author(s) : Soong Ming Foong, Wan Nor Liza Binti Wan Mahadi, Rahizar Bin Ramli Source :
Journal of Vibroengineering
|
58. |
Empirical investigation of acoustic emission signals for valve failure identification by using statistical method
2014
Author(s) : Rahizar Bin Ramli Source :
Measurement
|
59. |
Empirical investigation of acoustic emission signals for valve failure identification by using statistical method
2014
Author(s) : Rahizar Bin Ramli, Ahmad Saifizul Bin Abdullah Source :
MEASUREMENT
DOI :
10.1016/j.measurement.2014.08.028
|
60. |
Transition of bubbly to slug flow in a short vertical channel of gas-liquid two-phase flow
2014
Source :
Advanced Materials Research
|
61. |
Optimized suspension kinematic profiles for handling performance using 10-degree-of-freedom vehicle model
2014
Author(s) : Tey Jing Yuen, Soong Ming Foong, Rahizar Bin Ramli Source :
Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics
|
62. |
Velocities effects on the void fraction distribution in a vertical gas-liquid two-phase flow channel
2014
Source :
Advanced Materials Research
|
63. |
Reducing the uncertainties in the achievable vehicle performance targets through design optimization
2014
Author(s) : Tey Jing Yuen, Rahizar Bin Ramli Source :
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
|
64. |
Improving the dynamic characteristics of body-in- white structure using structural optimization
2014
Author(s) : Aizzat Sazali Yahaya Rashid, Sallehuddin Mohamed Haris, Anuar Alias, Rahizar Bin Ramli Source :
The Scientific World Journal
|
65. |
Identification of vehicle suspension parameters by design optimization
2013
Author(s) : Tey Jing Yuen, Rahizar Bin Ramli |
66. |
Impact of various biodiesel fuels obtained from edible and non-edible oils on engine exhaust gas and noise emissions
2013
|
67. |
Degree of vehicle overloading and its implication on road safety in developing countries
2013
Source :
Civil and Environmental Research, IISTE, 3(12), pp.20-31.
|
68. |
Using gear mechanism in vehicle suspension as a method of altering suspension characteristic
2013
|
69. |
Implementing wavelet packet transform for valve
failure detection using vibration and acoustic
emission signals
2012
Author(s) : Sim Hoi Yin, Mohd Abdul Karim Abdullah, Rahizar Bin Ramli |
70. |
A review of energy regeneration capabilities in
controllable suspension for passengers' car
2012
|
71. |
A comparative Analysis of Experimental and Numerical
Investigations of Composite Tubes under Axial and
Lateral Loading
2010
Author(s) : Rahizar Bin Ramli Source :
Australian Journal of Basic Applied Science
|
72. |
A comparative analysis of experimental and numerical investigations of composite tubes under axial and lateral loading
2010
Author(s) : Rahizar Bin Ramli Source :
Australian Journal of Basic and Applied Sciences
|
73. |
Multi-body Co-simulation of Semi-active Suspension Systems
2007
Author(s) : Rahizar Bin Ramli Source :
Proceedings of the I Mech E Part K: Journal of Multi-body Dynamics
|
74. |
Incorporating quality auditing into condition based maintenance scheme
2004
Author(s) : Rahizar Bin Ramli Source :
International Journal of COMADEM
|
75. |
Incorporating quality auditing into condition based maintenance scheme.
2003
Author(s) : Rahizar Bin Ramli Source :
International Journal of COMADEM
|
76. |
An Investigation of Main Oil Line Pump Failures on the Offshore Oil Platform
1999
Author(s) : Rahizar Bin Ramli Source :
International Journal of Condition Monitoring and Diagnostics Engineering Management (COMADEM)
|
BOOK
NO | DETAILS OF BOOK |
---|---|
1. |
Proceedings ¿ Computationally Optimised Fuel-Efficient
Concept Car (COFEC), Volume I
2011
Author(s) : Rahizar Bin Ramli |
CHAPTER IN BOOK
NO | DETAILS OF CHAPTER IN BOOK |
---|
PROCEEDING
NO | DETAILS OF PROCEEDING |
---|---|
1. |
Quantification of Valve Severity in Reciprocating Compressor by Using Acoustic Emission Technique
2018
Author(s) : Rahizar Bin Ramli |
2. |
Determination of characteristic frequency segments of acoustic emission signal for valve leakage detection in reciprocating compressor
2017
Author(s) : Rahizar Bin Ramli, Ahmad Saifizul Bin Abdullah |
3. |
Quantification of valve severity in reciprocating compressor by using acoustic emission technique
2017
Author(s) : Rahizar Bin Ramli, Ahmad Saifizul Bin Abdullah |
4. |
Valve leakage analysis in reciprocating compressor by using acoustic emission technique
2017
Author(s) : Ahmad Saifizul Bin Abdullah, Rahizar Bin Ramli |
5. |
Conceptual Design of Automated Measurement Device for Testing Timing Gates
2016
Author(s) : Ahmad Saifizul Bin Abdullah, Rahizar Bin Ramli |
6. |
Design Optimization of Full Vehicle Suspension
Based on
Ride and Handling Performance
2013
Author(s) : Rahizar Bin Ramli |
7. |
Minimum safe time gap (MSTG) as a new safety indicator incorporating vehicle and driver factors
2013
Author(s) : Rahizar Bin Ramli |
8. |
Multi-objective Optimization Based on Realistic
Quarter Vehicle Model
2010
Author(s) : Rahizar Bin Ramli |
9. |
Comparison of Computational Efficiency of MOEAD and
NSGA-II for Passive Vehicle Suspension Optimization
2010
Author(s) : Rahizar Bin Ramli |
10. |
Simulation and Evaluation of Passive and Semi-Active Suspension of Quarter and Full Vehicle Ride Models
2005
Author(s) : Rahizar Bin Ramli |
11. |
Dynamic Analysis of Semi-active Suspension Systems Using a Co-simulation Approach
2004
Author(s) : Rahizar Bin Ramli |
RESEARCH PROJECT
GRANT | PROGRESS | STATUS |
---|---|---|
Assessment Of Defective Valve In Reciprocating Compressor At Different Speeds And Discharge Pressure Using Acoustic Emission (ae) Technique
|
|
end |
Vehicle Dynamics Pegpformance Of A Heavy Vehicle Incorporating Suspension With Inerter
Researcher(s) : Ts. Dr. Soong Ming Foong, Dr. Azuddin Bin Mamat |
|
end |
Development of valve condition models for reciprocating compressor using acoustic emission technique under different operating load
Researcher(s) : - |
|
end |
Solder Testbed Study for Solder Joint Reliability of Element Added Leadfree Solder Alloy
Researcher(s) : - |
|
end |
Development Of Valve Condition Monitoring System For Industrial Reciprocating Compressor Using Acoustic Emission Technique
Researcher(s) : Associate Prof. Dr. Ahmad Saifizul Bin Abdullah |
|
end |
Safety Risk Assessment At Accident-prone Locations On Plus Expressway Using Advanced Dynamic Simulation Technique (adst)
|
|
end |
A Study On The Competency Level Of Drivers, Especially Commercial And Heavy Vehicles
|
|
end |
Solder Testbed Study For Vibration And Impact Response Of Element Added Sac Solder Alloy.
|
|
end |
DEVELOPMENT OF CONTROLLABLE VEHICLE SUSPENSION SYSTEM EMPLOYING AN INERTER BASED ON ELECTROMAGNETIC PRINCIPLE
|
|
end |
RESEARCH COLLABORATOR
GRANT | PROGRESS | STATUS |
---|---|---|
Characterization Of A Non-linear Variable Inerter Considering Vehicle Ride And Handling Aspects
|
|
end |
Design And Fabrication Of An In- Vehicle Ffb Weighing Mechanism (inveffbweight)
Researcher(s) : Associate Prof. Ir. Dr. Rahizar Bin Ramli, Professor Ir. Dr. Yap Hwa Jen |
|
end |
Development And Enhancement Of Traffic Information Sensor For Intelligent Urban Traffic Monitoring System
Researcher(s) : Associate Prof. Ir. Dr. Rahizar Bin Ramli |
|
end |
Developing An In Vitro Periodontal Ex Plant Culture Model To Induce Noninvasive Orthodontic Forces For Faster And Stable Bone Remodeling
|
|
end |
Fabrications And Evaluations Of In-pipe Hydro System's Components
|
|
end |
Real-time And Automated Traffic Data Inventory And Monitoring System (tdim)
Researcher(s) : Associate Prof. Ir. Dr. Rahizar Bin Ramli |
|
end |
Development of ELF Passive Shielding Application Using Magnetic Aqueous Substrate
Researcher(s) : Associate Prof. Ir. Dr. Rahizar Bin Ramli |
|
end |