Curriculum Vitae

PROF. EMERITUS IR. DR. MASJUKI BIN HAJI HASSAN

Professor
  • Department of Mechanical Engineering
    Faculty of Engineering
  • masjuki
  • +603-79675245

BIOGRAPHY

 

Ir. Dr. Masjuki Hj. Hassan was conferred Emeritus Professorship on 20th October 2018 in conjunction with the 58th University of Malaya Convocation. He was  a '2017-Merdeka Award winner in the Outstanding Scholastic Achievement Category' and listed as '2017, 2018, 2019, 2020 and 2021 as World Top 1% Highly Cited Researchers by Clarivate Analytics'. In addition he was listed as Top 2% World Scientists by Stanford University, USA in 2020 and 2021. He obtained his B.Sc.(Hons), Mech. Eng. from Leeds University, U.K. in 1977. This was followed by his M.Sc. in Tribology and Ph.D. in Mech. Eng. (Superlaminar Flow in Journal Bearing) from the same university in 1978 and 1982 respectively. On completion of his PhD, he was appointed as a lecturer in 1983 at University of Malaya. He retired as a Senior Professor at Mechanical Engineering Department, University of Malaya on 12 April 2019 and on 01 July 2019 he joined International Islamic University Malaysia, Gombak Campus Kuala Lumpur as a Professor at the Mechanical Engineering Department, Faculty of Engineering . He was a Visiting Professor at King Saud University (KSU), Riyadh, Saudi Arabia from 2017 to 2018. Administratively, he was appointed as Acting Dean, Deputy Dean, and Head of Mechanical Engineering Department on several occasions. He sat on many committees at International, National (Ministries), and University levels. He served as Senate Member of University of Malaya on several occasions and was Secretary of Council of National Professors - Engineering, Technology and Built Environment Cluster until 31st March 2016. He was Chairman of Council of National Professors - University of Malaya Chapter from 1st June 2016 to 31st May 2018. He was the founding President of Malaysian Tribology Society (MYTRIBOS) from 2007 to 2017. He was one of the  Vice - Presidents of International Tribology Council (ITC), UK (2017-2019) and was the Head of the Centre for Energy Sciences and Research Fellow at Center of Malay Excellence Study, University of Malaya. He received many awards for his outstanding academic achievements and also member of many International and National professional organizations. He collaborated and is still collaborating with many international research organizations such as United State Agency for International Aid Agency (USAID), ASEAN-Australian Energy Conservation Program (AAECP), ASIAN Development Bank (ADB), ASIA-EU Grant, Japanese Society for the Promotion of Science (JSPS) and AUN-Seed Net Program and Universities. He has successfully supervised many local and foreign Master and PhD students. He has published more than 500 journal articles, received more than 25,000 citations and h index of 90. He successfully supervised more than 67 MS and 42 PhD, comprising national and international candidates. His major contribution to the nation is through his expertise in biodiesel fuel production and automotive engineering, have been much sought for, to strengthen Malaysian Government Policy to blend higher percentages of biodiesel from palm oil with fossil diesel to be sold at petrol pumps throughout Malaysia. His other contribution to the nation is his involvement in more than 6 Technical Committees at SIRIM developing various Malaysian Standards for various Malaysian manufacturing industries. He reviewed and still being invited to review many journal articles by renown publishers. He serves as editorial board member of many international and national journals. He is a CEng(UK), MSAE(USA), PEng/Ir(Malaysia), FIMechE(UK) and Fellow of Academy Sciences Malaysia (FASc). On 01 January 2020 he was elected as Fellow of MYTRIBOS and in 2021 he was a join recipient of prestigious  IIUM MURABBI Award.

ACADEMIC QUALIFICATION

  • PHD(LEEDS)(1982), (FLUID MECHANIC)
    Leeds University, Leeds, UK
  • MSC(LEEDS)(1978), (TRIBOLOGY)
    Leeds University, Leeds, UK
  • BSC(HONS)(LEEDS)(1977), (MECHANICAL ENGINEERING)
    Leeds University, Leeds, UK

ADMINISTRATIVE DUTIES

  • Director Energy Sciences Research Centre
    01 Jan 2002 - present (University Malaya)
  • Head of Unit
    01 Jan 2019 - 12 Apr 2019 (Centre for Energy Sciences (Ces), Faculty of Engineering)
  • Associate Research Fellow of University of Malaya Research Centre for Malaya Excellence Study
    07 Sep 2016 - 06 Sep 2018 (University Malaya)
  • Spokesman and Technical Committee Panel for National Biodiesel Program, UM-MPOB
    01 Nov 2016 - 01 Nov 2017 (University Malaya)
  • Special Committee Member of Mechanical Engineering Department, Faculty of Engineering
    01 Sep 2016 - 01 Sep 2017 (University Malaya)
  • Committee Member for Undergraduate Studies Professor Representative at Faculty of Engineering
    01 Aug 2016 - 01 Aug 2017 (University Malaya)
  • Head of Department
    01 Aug 2015 - 31 Jul 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Head, Centre for Energy Sciences
    01 Jan 2016 - 31 Dec 2016 (University Malaya)
  • Chairman
    02 Nov 2015 - 01 Nov 2016 (University Malaya)
  • Speaker during Orientation Week at Faculty of Engineering
    01 Sep 2016 - 01 Sep 2016 (University Malaya)
  • Committee member for Royal Education Award (APD)
    10 Aug 2016 - 11 Aug 2016 (University Malaya)
  • Committee Member of Income Generation and Savings under PTj
    20 Apr 2016 - 20 Apr 2016 (University Malaya)
  • Secretary, Malaysia Professor's Council: Engineering, Technology and Built Environment Cluster
    01 Apr 2013 - 31 Mar 2016 (National)
  • Attended National Transformation Program, Faculty of Engineering
    18 Feb 2016 - 18 Feb 2016 (University Malaya)
  • Technical Committee Member for SEnergy@UM Program
    03 Feb 2016 - 03 Feb 2016 (University Malaya)
  • Head of Unit
    01 Jan 2015 - 31 Dec 2015 (Centre for Energy Sciences (Ces), Faculty of Engineering)
  • Head of Department
    01 Aug 2014 - 31 Jul 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Coordinator for Boiler Lab
    27 Jul 2012 - 26 Jul 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Member of the ASM Task Force on Carbon Free Energy
    02 May 2014 - 30 Apr 2015 (National)
  • Head of Unit
    02 Jan 2014 - 31 Dec 2014 (Centre for Energy Sciences (Ces), Faculty of Engineering)
  • Head, Centre for Energy Sciences
    02 Jan 2013 - 31 Dec 2014 (University Malaya)
  • Deputy Dean
    02 Feb 2011 - 01 Jul 2011 (Dean Office, Faculty of Engineering)
  • Deputy Dean
    01 Sep 2009 - 01 Feb 2011 (Dean Office, Faculty of Engineering)
  • Deputy Dean of Higher Degree
    01 Sep 2009 - 30 Jun 2011 (Department of Mechanical Engineering, Faculty of Engineering)
  • Member, Advanced Engineering & Technology Research Cluster Panel
    01 Jan 2009 - 31 Dec 2010 (University Malaya)
  • Head of Department
    01 Sep 2008 - 31 Aug 2009 (Department of Mechanical Engineering, Faculty of Engineering)
  • Senate Member
    03 Apr 2003 - 20 Oct 2009 (University Malaya)
  • Head of Department of Mechanical Engineering
    01 Sep 2007 - 31 Aug 2009 (Department of Mechanical Engineering, Faculty of Engineering)
  • Head of Department
    01 Sep 2007 - 31 Aug 2008 (Department of Mechanical Engineering, Faculty of Engineering)
  • Quality Manager
    21 Apr 2003 - 01 Nov 2005 (University Malaya)
  • Deputy Dean of Development
    02 Mar 2001 - 31 Jul 2005 (Dean Office, Faculty of Engineering)
  • Head of Department of Mechanical Engineering
    01 Oct 1994 - 30 Sep 2000 (University Malaya)
  • Member, Laboratory Technology Training(JLTM)Committee
    01 Oct 1994 - 30 Sep 2000 (University Malaya)
  • Senate Member
    01 Oct 1994 - 31 Dec 1997 (University Malaya)
  • Senate Member
    01 Nov 1987 - 30 Sep 1988 (University Malaya)
  • Senate Member
    22 Jul 1987 - 31 Aug 1987 (University Malaya)

MEMBERSHIPS

  • ACADEMY OF SCIENCES MALAYSIA, FELLOW MEMBER
    Since 2019 (International)
  • AKEDEMI SAINS MALAYSIA, FELLOW
    Since 2019 (National)
  • INSTITUTION OF MECHANICAL ENGINEERS, LONDON, UK. (FIMECHE), FELLOW
    Since 2013 (International)
  • MALAYSIAN TRIBOLOGY SOCIETY, MYTRIBOS (FORMERLY BASED IN UM), FELLOW MEMBER
    Since 2008 (International)
  • THE INSTITUTION OF MECHANICAL ENGINEERS (I.MECH.E.) LONDON, U.K., FELLOW MEMBER
    Since 1977 (International)
  • INTERNATIONAL TRIBOLOGY COUNCIL (ITC), VICE PRESIDENT
    2018 to 2021 (International)
  • AHLI JAWATANKUASA KESEPAKARAN, UNIVERSITI KEBANGSAAN MALAYSIA, COMMITTEE MEMBER
    2018 to 2019 (University)
  • INTERNATIONAL STEERING COMMITTEE IN INTERNATIONAL CONFERENCE ON SUSTAINABLE ENERGY AND GREEN TECHNOLOGY, COMMITTEE MEMBER
    2018 to 2018 (International)
  • KING SAUD UNIVERSITY, VISITING RESEARCH PROFESSOR
    2017 to 2018 (International)
  • AHLI PANEL CENDIKIAWAN MAJLIS DAKWAH NEGARA, PANEL
    2016 to 2018 (National)
  • INSTITUTE OF ENERGY MALAYSIA, EXECUTIVE COMMITTEE MEMBER
    1991 to 2013 (National)
  • MECHANICAL ENGINEERING COMPONENT TECHNICAL COMMITTEE (TC), SIRIM BHD, MEMBER
    2016 to present (University)
  • STLE ( SOCIETY OF TRIBOLOGISTS AND LUBRICATION ENGINEERS ) USA, MEMBER
    1990 to 2003 (International)

AWARD AND STEWARDSHIP

  • Clarivate Highly Cited Researchers.
    2021, CLARIVATE ANALYTICS, International
  • Top 1% Highly Cited Researcher
    2020, Web Of Science, Clarivate Analytics.,  (International)
  • Top 2% World Rank Scientists
    2020, Stanford University (USA),  (International)
  • Fellow Mytribos (Member)
    2020, Malaysian Tribology Society,  (International)
  • The Successful People in Malaysia,
    2019, BRITISH PUBLISHING HOUSE LTD,  (International)
  • Fellow Academy of Sciences Malaysia (Fasc)
    2019, Academy of Sciences Malaysia,  (International)
  • 2019 Top 1% Highly Cited Researcher
    2019, Clarivate Analytics,  (International)
  • 2018 Top 1% Highly Cited Researcher
    2018, Clarivate Analytics,  (International)
  • Emeritus Professor
    2018, University of Malaya,  (University)
  • 2017 Highly Cited Researcher in Recognition of Ranking Among The Top 1% of Researchers for Most Cited Document, in Engineering
    2017, Clarivate Analytics,  (International)
  • Pecipta'17 Gold Medal
    2017, MINISTRY OF HIGHER EDUCATION MALAYSIA,  (International)
  • Merdeka Award for Outstanding Scholastic Achievement
    2017, MERDEKA AWARD TRUST,  (National)
  • Professional Engineer
    2016, MALAYSIAN BOARD OF ENGINEER,  (International)
  • Won Silver Medal Award At Invention & Innovation Awards, Malaysian Technology Expo 2016
    2016, Malaysian Association of Research Scientists (MARS),  (National)
  • UM Excellence Award
    2015, Universiti Malaya
  • Pecipta'15 Gold Medal
    2015, MINISTRY OF HIGHER EDUCATION MALAYSIA,  (International)
  • Pecipta Best Award
    2015, Ministry of Higher Education,  (International)
  • University of Malaya Excellence Award 2015
    2015, University of Malaya,  (University)
  • Research Fronts 2014, 100 Top Ranked Specialties in The Sciences and Social Sciences
    2014, The National Sciences Library, Chinese Academy of Sciences Thomson Reuters IP & Science The Joint Research Center of Emerging Technology Analysis,  (International)
  • Gold Medal - Malaysia Technology Expo 2014 (Mte 2014)
    2014, Malaysia Association of Research Scientists (MARS),  (National)
  • Top Research Scientist Malaysia (Trsm)
    2014, Akademi Sains Malaysia,  (National)
  • Fellow Institute of Mechanical Engineer UK (Fimeche) & Ceng
    2013, Institute of Mechanical Engineer UK,  (International)
  • Silver Award for "Nano-Oil for a Greener Future" At Bioinnovations Awards 2013
    2013, Malaysian Association of Research Scientists,  (National)
  • Best of The Best Award for "Diffuser Augmented Dual-Rotor Energy Recovery Wind Turbine Generator"
    2013, University of Malaya,  (University)
  • Bronze Prize for "Eco-Greenergy Interactive Outdoor Lighting System (Powered by Shroud Wind Turbine & Solar Panel)
    2013, Korea Invention Promotion Association,  (International)
  • Gold Prize for Invention of "Shroud-Augmented Dual-Rotor Exhaust Air Energy Recovery Wind Turbine Generator"
    2013, Korea Invention Promotion Association,  (International)
  • Gold Medal for The Invention/Innovation of "Eco-Greenergy Outdoor Lighting System"
    2013, Malaysian Association of Research Scientists,  (National)
  • Itex Gold Medal for The Invention "Smart Eco-Greenergy Wind-Solar Hybrid Charging Station for Electric Bicycle in Green Cities"
    2013, Ministry of Science, Technology and Innovation,  (National)
  • Diploma for The Participation At The International Trade Fair Iena 2012, Ideas-Inventions-New Products.
    2012, International Trade Fair.,  (International)
  • Certificate of Excellent Service
    2009, Universiti Malaya
  • Bronze Medal for Safety of Hydrogen Engine (UM Expo January 2009)
    2009, University of Malaya,  (University)
  • Excellence Service Award
    2008, Universiti Malaya
  • Certificate of Excellent Service
    2008, Universiti Malaya
  • Khidmat Setia 30 Award
    2008, University of Malaya,  (University)
  • Award of 30 Years Loyalty Service
    2008, University of Malaya,  (University)
  • Excellence Award
    2008, University of Malaya,  (University)
  • Refereed Journal Publication Special Award
    2007, ,
  • Certificate of Excellent Service
    2007, Universiti Malaya
  • Winner of Bronze Medal, Research, Invention and Innovation Expo 2007 (Ozone Friendly Refrigerant for Refrigerator)
    2007, University of Malaya,  (University)
  • Winner of Bronze Medal, Research, Invention and Innovation Expo 2007 (Natural Gas Powered Motorcycle)
    2007, University of Malaya,  (University)
  • Special Most Refereed Journal Award
    2007, University of Malaya,  (University)
  • Certificate of Excellent Service
    2006, Universiti Malaya
  • Winner of Gold Medal With Mention, 55th World Exhibition On Innovation, Research and New Technologies, (Brussels Eureka 2006) ? Cng/Di Group-Irpa Project
    2006, BRUSSELS-EUREKA, CPE Exhibition, Brussels, Belgium,  (International)
  • Winner of Special Award, 17th International Invention, Innovation, Industrial & Technology Exhibition 2006 (Itex 2006)-Cng/Di Group-Irpa Project
    2006, MOSTI and MINDS, Kuala Lumpur,  (National)
  • Winner of Silver Medal, 17th International Invention, Innovation, Industrial & Technology Exhibition 2006 (Itex 2006)-Biofadd
    2006, MOSTI and MINDS, Kuala Lumpur,  (International)
  • Winner of Special Award, 17th International Invention, Innovation, Industrial & Technology Exhibition 2006 (Itex 2006)-Cng/Di Group-Irpa Project
    2006, MOSTI and MINDS, Kuala Lumpur,  (International)
  • Winner of Gold Medal, Research, Invention and Innovation Expo 2006 (Cng/Di)
    2006, University of Malaya,  (National)
  • Winner of Gold Medal, 17th International Invention, Innovation, Industrial & Technology Exhibition 2006 (Itex 2006)-Cng/Di Group-Irpa Project
    2006, MOSTI and MINDS, Kuala Lumpur,  (International)
  • Certificate of Excellent Service
    2005, Universiti Malaya
  • Excellence Service Award
    2004, Universiti Malaya
  • Excellence Service Award
    1998, Universiti Malaya
  • Excellence Service Award
    1997, Universiti Malaya

PUBLICATIONS

Article in Journal
WoS
  1. Gul, M., Zulkifli, N. W. M., Kalam, M. A., Masjuki, H. H., Mujtaba, M. A., Yousuf, S., . . . Hassan, M. T. (2021). RSM and Artificial Neural Networking based production optimization of sustainable Cotton bio-lubricant and evaluation of its lubricity & tribological properties. Energy Reports, 7, 830-839. doi: 10.1016/j.egyr.2021.01.033
  2. Kumar, L. H., Kazi, S. N., Masjuki, H. H., Zubir, M. N. M., Jahan, A., & Bhinitha, C. (2021). Energy, exergy and economic analysis of liquid flat-plate solar collector using green covalent functionalized graphene nanoplatelets. Applied Thermal Engineering, 192, 19. doi: 10.1016/j.applthermaleng.2021.116916
  3. Mujtaba, M. A., Cho, H. M., Masjuki, H. H., Kalam, M. A., Farooq, M., Soudagar, M. E. M., . . . Ahmad, Z. (2021). Effect of primary and secondary alcohols as oxygenated additives on the performance and emission characteristics of diesel engine. Energy Reports, 7, 1116-1124. doi: 10.1016/j.egyr.2020.12.008
  4. Mujtaba, M. A., Cho, H. M., Masjuki, H. H., Kalam, M. A., Farooq, M., Soudagar, M. E. M., . . . Syahir, A. Z. (2021). Effect of alcoholic and nano-particles additives on tribological properties of diesel-palm-sesame-biodiesel blends. Energy Reports, 7, 1162-1171. doi: 10.1016/j.egyr.2020.12.009
  5. Mujtaba, M. A., Kalam, M. A., Masjuki, H. H., Razzaq, L., Khan, H. M., Soudagar, M. E. M., . . . Ong, H. C. (2021). Development of empirical correlations for density and viscosity estimation of ternary biodiesel blends. Renewable Energy, 179, 1447-1457. doi: 10.1016/j.renene.2021.07.121
  6. Mujtaba, M. A., Kalam, M. A., Masjuki, H. H., Soudagar, M. E. M., Khan, H. M., Fayaz, H., . . . Razzaq, L. (2021). Effect of palm-sesame biodiesel fuels with alcoholic and nanoparticle additives on tribological characteristics of lubricating oil by four ball tribo-tester. Alexandria Engineering Journal, 60(5), 4537-4546. doi: 10.1016/j.aej.2021.03.017
  7. Zulfattah, Z. M., Zulkifli, N. W. M., Masjuki, H. H., Harith, M. H., Syahir, A. Z., Norain, I., . . . Arslan, A. (2021). Friction and Wear Performance of Oleate-Based Esters With Two-, Three-, and Four-Branched Molecular Structure in Pure Form and Mixture. Journal of Tribology-Transactions of the Asme, 143(1), 10. doi: 10.1115/1.4047584
  8. Cheah, M. Y., Ong, H. C., Zulkifli, N. W. M., Masjuki, H. H., & Salleh, A. (2020). Physicochemical and tribological properties of microalgae oil as biolubricant for hydrogenpowered engine. International Journal of Hydrogen Energy, 45(42), 22364-22381. doi: 10.1016/j.ijhydene.2019.11.020
  9. Gul, M., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Mujtaba, M. A. (2020). A Review: Role of Fatty Acids Composition in Characterizing Potential Feedstock for Sustainable Green Lubricants by Advance Transesterification Process and its Global as Well as Pakistani Prospective. Bioenergy Research, 13(1), 1-22. doi: 10.1007/s12155-019-10040-7
  10. Gul, M., Zulkifli, N. W. M., Masjuki, H. H., Kalam, M. A., Mujtaba, M. A., Harith, M. H., . . . Farooq, A. B. (2020). Effect of TMP-based-cottonseed oil-biolubricant blends on tribological behavior of cylinder liner-piston ring combinations. Fuel, 278, 10. doi: 10.1016/j.fuel.2020.118242
  11. Jamshaid, M., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Arslan, A., & Zulfattah, Z. M. (2020). Effect of Fatty Acid Methyl Ester on Fuel-Injector Wear Characteristics. Journal of Biobased Materials and Bioenergy, 14(3), 327-339. doi: 10.1166/jbmb.2020.1974
  12. Mujtaba, M. A., Cho, H. M., Masjuki, H. H., Kalam, M. A., Ong, H. C., Gul, M., . . . Yusoff, M. (2020). Critical review on sesame seed oil and its methyl ester on cold flow and oxidation stability. Energy Reports, 6, 40-54. doi: 10.1016/j.egyr.2019.11.160
  13. Mujtaba, M. A., Kalam, M. A., Masjuki, H. H., Gul, M., Soudagar, M. E. M., Ong, H. C., . . . Yusoff, M. (2020). Comparative study of nanoparticles and alcoholic fuel additives-biodiesel-diesel blend for performance and emission improvements. Fuel, 279, 11. doi: 10.1016/j.fuel.2020.118434
  14. Mujtaba, M. A., Masjuki, H. H., Kalam, M. A., Noor, F., Farooq, M., Ong, H. C., . . . Razzaq, L. (2020). Effect of Additivized Biodiesel Blends on Diesel Engine Performance, Emission, Tribological Characteristics, and Lubricant Tribology. Energies, 13(13), 15. doi: 10.3390/en13133375
  15. Mujtaba, M. A., Masjuki, H. H., Kalam, M. A., Ong, H. C., Gul, M., Farooq, M., . . . Yusoff, M. (2020). Ultrasound-assisted process optimization and tribological characteristics of biodiesel from palm-sesame oil via response surface methodology and extreme learning machine - Cuckoo search. Renewable Energy, 158, 202-214. doi: 10.1016/j.renene.2020.05.158
  16. Silitonga, A. S., Shamsuddin, A. H., Mahlia, T. M. I., Milano, J., Kusumo, F., Siswantoro, J., . . . Ong, H. C. (2020). Biodiesel synthesis from Ceiba pentandra oil by microwave irradiation-assisted transesterification: ELM modeling and optimization. Renewable Energy, 146, 1278-1291. doi: 10.1016/j.renene.2019.07.065
  17. Syahir, A. Z., Harith, M. H., Zulkifli, N. W. M., Masjuki, H. H., Kalam, M. A., Yusoff, M., . . . Ibrahim, T. M. (2020). Compatibility of Ionic Liquid With Glycerol Monooleate and Molybdenum Dithiocarbamate as Additives in Bio-Based Lubricant. Journal of Tribology-Transactions of the Asme, 142(6), 11. doi: 10.1115/1.4046122
  18. Tan, M. Y., Liza, S., Khadijah, S. M. P., Abbas, A. A., Merican, A. M., Ayob, K. A., . . . Masjuki, H. H. (2020). Surface analysis of early retrieved polyethylene tibial inserts for both knees in total knee replacement. Engineering Failure Analysis, 109, 12. doi: 10.1016/j.engfailanal.2019.104279
  19. Arslan, A., Masjuki, H. H., Quazi, M. M., Kalam, M. A., Varman, M., Jamshaid, M., . . . Harith, M. H. (2019). Experimental investigation of tribological properties of laser textured tungsten doped diamond like carbon coating under dry sliding conditions at various loads. Materials Research Express, 6(10), 9. doi:10.1088/2053-1591/ab408c
  20. Arslan, A., Quazi, M. M., Masjuki, H. H., Kalam, M. A., Varman, M., Zulkifli, N. W. M., . . . Mustafa, M. S. (2019). Wear characteristics of patterned and un-patterned tetrahedral amorphous carbon film in the presence of synthetic and bio based lubricants. Materials Research Express, 6(3), 10. doi:10.1088/2053-1591/aaf74d
  21. How, H. G., Teoh, Y. H., Masjuki, H. H., Nguyen, H. T., Kalam, M. A., Chuah, H. G., Alabdulkarem, A. (2019). Impact of two-stage injection fuel quantity on engine-out responses of a common-rail diesel engine fueled with coconut oil methyl esters-diesel fuel blends. Renewable Energy, 139, 515-529. doi:10.1016/j.renene.2019.02.112
  22. Jamshaid, M., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Arslan, A., Alwi, A., . . . Syahir, A. Z. (2019). Production optimization and tribological characteristics of cottonseed oil methyl ester. Journal of Cleaner Production, 209, 62-73. doi:10.1016/j.jclepro.2018.10.126
  23. Mannan, A., Sabri, M. F. M., Abul Kalam, M., Masjuki, H. H. (2019). Tribological Properties of Steel/Steel, Steel/DLC and DLC/DLC Contacts in the Presence of Biodegradable Oil. Journal of the Japan Petroleum Institute, 62(1), 11-18. doi:10.1627/jpi.62.11
  24. Ong, H. C., Milano, J., Silitonga, A. S., Hassan, M. H., Shamsuddin, A. H., Wang, C. T., . . . Sutrisno, J. (2019). Biodiesel production from Calophyllum inophyllum-Ceiba pentandra oil mixture: Optimization and characterization. Journal of Cleaner Production, 219, 183-198. doi:10.1016/j.jclepro.2019.02.048
  25. Syahir, A. Z., Zulkifli, N. W. M., Masjuki, H. H., Kalam, M. A., Harith, M. H., Yusoff, M., . . . Jamshaid, M. (2020). Tribological Improvement Using Ionic Liquids as Additives in Synthetic and Bio-Based Lubricants for Steel-Steel Contacts. Tribology Transactions, 63(2), 235-250. doi: 10.1080/10402004.2019.1679934
  26. Teoh, Y. H., How, H. G., Masjuki, H. H., Nguyen, H. T., Kalam, M. A., Alabdulkarem, A. (2019). Investigation on particulate emissions and combustion characteristics of a common-rail diesel engine fueled with Moringa oleifera biodiesel-diesel blends. Renewable Energy, 136, 521-534. doi:10.1016/j.renene.2018.12.110
  27. Zulfattah, Z. M., Zulkifli, N. W. M., Masjuki, H. H., Harith, M. H., Syahir, A. Z., Norain, I., . . . Arslan, A. (2019). Effect of bio-based lubricant towards emissions and engine breakdown due to spark plug fouling in a two-stroke engine. Journal of Cleaner Production, 221, 215-223. doi:10.1016/j.jclepro.2019.02.224
  28. Ahmmad, M. S., Hassan, M. B., Abul Kalam, M. (2018). Comparative corrosion characteristics of automotive materials in Jatropha biodiesel. International Journal of Green Energy, 15(6), 393-399. doi:10.1080/15435075.2018.1464925
  29. Milano, J., Ong, H. C., Masjuki, H. H., Silitonga, A. S., Kusumo, F., Dharma, S., . . . Wang, C. T. (2018). Physicochemical property enhancement of biodiesel synthesis from hybrid feedstocks of waste cooking vegetable oil and Beauty leaf oil through optimized alkaline-catalysed transesterification. Waste Management, 80, 435-449. doi:10.1016/j.wasman.2018.09.005
  30. Zaharin, M. S. M., Abdullah, N. R., Masjuki, H. H., Ali, O. M., Najafi, G., Yusaf, T. (2018). Evaluation on physicochemical properties of iso-butanol additives in ethanol-gasoline blend on performance and emission characteristics of a spark-ignition engine. Applied Thermal Engineering, 144, 960-971. doi:10.1016/j.applthermaleng.2018.08.057
  31. Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Kamruzzaman, M., Shahin, M. M., Rashed, M. M. (2017). Evaluation of oxygenated n-butanol-biodiesel blends along with ethyl hexyl nitrate as cetane improver on diesel engine attributes. Journal of Cleaner Production, 141, 928-939.
  32. Mardhiah, H. H., Ong, H. C., Masjuki, H. H., Lim, S., Lee, H. V. (2017). A review on latest developments and future prospects of heterogeneous catalyst in biodiesel production from non-edible oils. Renewable Sustainable Energy Reviews, 67, 1225-1236.
  33. Monirul, I. M., Kalam, M. A., Masjuki, H. H., Zulkifli, N. W. M., Shahir, S. A., Mosarof, M. H., Ruhul, A. M. (2017). Influence of poly(methyl acrylate) additive on cold flow properties of coconut biodiesel blends and exhaust gas emissions. Renewable Energy, 101, 702-712.
  34. Sundus, F., Fazal, M. A., Masjuki, H. H. (2017). Effect of anti-oxidants on the lubricity of B30 biodiesel-diesel blend. Lubrication Science, 29(1), 3-15.
  35. Abedin, M. J., Imran, A., Masjuki, H. H., Kalam, M. A., Shahir, S. A., Varman, M., Ruhul, A. M. (2016). An overview on comparative engine performance and emission characteristics of different techniques involved in diesel engine as dual-fuel engine operation, Renewable Sustainable Energy Reviews. 60(306-316), Review
  36. Abedin, M. J., Kalam, M. A., Masjuki, H. H., Sabri, M. F. M., Rahman, S. M. A., Sanjid, A., Fattah, I. M. R. (2016). Production of biodiesel from a non-edible source and study of its combustion, and emission characteristics: A comparative study with B5, Renewable Energy. 88(20-29), Article
  37. Ahmed, A., Masjuki, H. H., Varman, M., Kalam, M. A., Habibullah, M., Al Mahmud, K. A. H. (2016). An overview of geometrical parameters of surface texturing for piston/cylinder assembly and mechanical seals, Meccanica. 51(19-23), Article
  38. Ali, O. M., Mamat, R., Masjuki, H. H., Abdullah, A. A. (2016). Analysis of blended fuel properties and cycle-to-cycle variation in a diesel engine with a diethyl ether additive, Energy Conversion and Management. 108(511-519), Article
  39. Arslan, A., Masjuki, H. H., Kalam, M. A., Varman, M., Mufti, R. A., Mosarof, M. H., Khuong, L. S., Quazi, M. M. (2016). Surface Texture Manufacturing Techniques and Tribological Effect of Surface Texturing on Cutting Tool Performance: A Review, Critical Reviews in Solid State and Materials Sciences. 41(6447-481), Review
  40. Arslan, A., Masjuki, H. H., Varman, M., Abul Kalam, M., Quazi, M. M., Mosarof, M. H. (2016). Effect of change in temperature on the tribological performance of micro surface textured DLC coating, Journal of Materials Research. 31(131837-1847), Article
  41. Azman, S. S. N., Zulkifli, N. W. M., Masjuki, H., Gulzar, M., Zahid, R. (2016). Study of tribological properties of lubricating oil blend added with graphene nanoplatelets, Journal of Materials Research. 31(131932-1938), Article
  42. Dharma, S., Masjuki, H. H., Ong, H. C., Sebayang, A. H., Silitonga, A. S., Kusumo, F., Mahlia, T. M. I. (2016). Optimization of biodiesel production process for mixed Jatropha curcas-Ceiba pentandra biodiesel using response surface methodology, Energy Conversion and Management. 115(178-190), Article
  43. Elsheikh, M. H., Sabri, M. F. M., Said, S. M., Miyazaki, Y., Masjuki, H. H., Shnawah, D. A. A., Long, B. D., Naito, S., Bashir, M. A. (2016). Thermoelectric Properties of Microstructurally Modified CoSb3 Skutterudite by Hf-Addition, Journal of Electronic Materials. 45(62886-2890), Article
  44. Fazal, M. A., Sazzad, B. S., Haseeb, A., Masjuki, H. H. (2016). Inhibition study of additives towards the corrosion of ferrous metal in palm biodiesel, Energy Conversion and Management. 122(290-297), Article
  45. Gulzar, M., Masjuki, H. H., Kalam, M. A., Varman, M., Zulkifli, N. W. M., Mufti, R. A., Zahid, R. (2016). Tribological performance of nanoparticles as lubricating oil additives, Journal of Nanoparticle Research. 18(825), Review
  46. Gulzar, M., Masjuki, H. H., Varman, M., Kalam, M. A., Zulkifli, N. W. M., Mufti, R. A., Liaquat, A. M., Zahid, R., ArsIan, A. (2016). Effects of biodiesel blends on lubricating oil degradation and piston assembly energy losses, Energy. 111(713-7210360-5442. )
  47. Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Alabdulkarem, A., Kamruzzaman, M., Rashed, M. M. (2016). A comparative study of C-4 and C-5 alcohol treated diesel-biodiesel blends in terms of diesel engine performance and exhaust emission, Fuel. 179(281-288), Article
  48. Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Alabdulkarem, A., Rashed, M. M., Ashraful, A. M. (2016). Influences of ignition improver additive on ternary (diesel-biodiesel-higher alcohol) blends thermal stability and diesel engine performance, Energy Conversion and Management. 123(252-264), Article
  49. Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Alabdulkarem, A., Rashed, M. M., Teoh, Y. H., How, H. G. (2016). Higher alcohol-biodiesel-diesel blends: An approach for improving the performance, emission, and combustion of a light-duty diesel engine, Energy Conversion and Management. 111(174-185), Article
  50. Kalam, M. A., Rashed, M. M., Imdadul, H. K., Masjuki, H. H. (2016). Property development of fatty acid methyl ester from waste coconut oil as engine fuel, Industrial Crops and Products. 87(333-339), Article
  51. Khuong, L. S., Zulkifli, N. W. M., Masjuki, H. H., Mohamad, E. N., Arslan, A., Mosarof, M. H., Azham, A. (2016). A review on the effect of bioethanol dilution on the properties and performance of automotive lubricants in gasoline engines, Rsc Advances. 6(7166847-66869), Review
  52. Masjuki, H. H., Ruhul, A. M., Mustafi, N. N., Kalam, M. A., Arbab, M. I., Fattah, I. M. R. (2016). Study of production optimization and effect of hydroxyl gas on a CI engine performance and emission fueled with biodiesel blends, International Journal of Hydrogen Energy. 41(3314519-145280360-3199. )
  53. Milano, J., Ong, H. C., Masjuki, H. H., Chong, W. T., Lam, M. K., Loh, P. K., Vellayan, V. (2016). Microalgae biofuels as an alternative to fossil fuel for power generation, Renewable Sustainable Energy Reviews. 58(180-197), Review
  54. Monirul, I. M., Masjuki, H. H., Kalam, M. A., Mosarof, M. H., Zulkifli, N. W. M., Teoh, Y. H., How, H. G. (2016). Assessment of performance, emission and combustion characteristics of palm, jatropha and Calophyllum inophyllum biodiesel blends, Fuel. 181(985-9950016-2361. )
  55. Mosarof, M. H., Kalam, M. A., Masjuki, H. H., Alabdulkarem, A., Ashraful, A. M., Arslan, A., Rashedul, H. K., Monirul, I. M. (2016). Optimization of performance, emission, friction and wear characteristics of palm and Calophyllum inophyllum biodiesel blends, Energy Conversion and Management. 118(119-134), Article
  56. Mosarof, M. H., Kalam, M. A., Masjuki, H. H., Alabdulkarem, A., Habibullah, M., Arslan, A., Monirul, I. M. (2016). Assessment of friction and wear characteristics of Calophyllum inophyllum and palm biodiesel, Industrial Crops and Products. 83(470-483), Article
  57. Mosarof, M. H., Kalam, M. A., Masjuki, H. H., Arslan, A., Monirul, I. M., Ruhul, A. M., Shahir, S. A., Khuong, L. S. (2016). Analysis of thermal stability and lubrication characteristics of Millettia pinnata oil, Rsc Advances. 6(8481414-81425), Article
  58. Norjannah, B., Ong, H. C., Masjuki, H. H., Juan, J. C., Chong, W. T. (2016). Enzymatic transesterification for biodiesel production: a comprehensive review, Rsc Advances. 6(6560034-60055), Review
  59. Quazi, M. M., Fazal, M. A., Haseeb, A., Yusof, F., Masjuki, H. H., Arslan, A. (2016). Effect of rare earth elements and their oxides on tribo-mechanical performance of laser claddings: A review, Journal of Rare Earths. 34(6549-564), Review
  60. Quazi, M. M., Fazal, M. A., Haseeb, A., Yusof, F., Masjuki, H. H., Arslan, A. (2016). Laser-based Surface Modifications of Aluminum and its Alloys, Critical Reviews in Solid State and Materials Sciences. 41(2106-131), Review
  61. Rashed, M. M., Kalam, M. A., Masjuki, H. H., Habibullah, M., Imdadul, H. K., Shahin, M. M., Rahman, M. M. (2016). Improving oxidation stability and NOX reduction of biodiesel blends using aromatic and synthetic antioxidant in a light duty diesel engine, Industrial Crops and Products. 89(273-284), Article
  62. Rashed, M. M., Kalam, M. A., Masjuki, H. H., Mofijur, M., Rasul, M. G., Zulkifli, N. W. M. (2016). Performance and emission characteristics of a diesel engine fueled with palm, jatropha, and moringa oil methyl ester, Industrial Crops and Products. 79(70-76), Article
  63. Rashed, M. M., Masjuki, H. H., Kalam, M. A., Alabdulkarem, A., Imdadul, H. K., Rashedul, H. K., Shahin, M. M., Habibullah, M. (2016). A comprehensive study on the improvement of oxidation stability and NOx emission levels by antioxidant addition to biodiesel blends in a light-duty diesel engine, Rsc Advances. 6(2722436-22446), Article
  64. Rashed, M. M., Masjuki, H. H., Kalam, M. A., Alabdulkarem, A., Rahman, M. M., Imdadul, H. K., Rashedul, H. K. (2016). Study of the oxidation stability and exhaust emission analysis of Moringa olifera biodiesel in a multi-cylinder diesel engine with aromatic amine antioxidants, Renewable Energy. 94(294-303), Article
  65. Ruhul, A. M., Kalam, M. A., Masjuki, H. H., Alabdulkarem, A., Atabani, A. E., Fattah, I. M. R., Abedin, M. J. (2016). Production, characterization, engine performance and emission characteristics of Croton megalocarpus and Ceiba pentandra complementary blends in a single-cylinder diesel engine, Rsc Advances. 6(2924584-24595), Article
  66. Ruhul, M. A., Abedin, M. J., Rahman, S. M. A., Masjuki, B. H., Alabdulkarem, A., Kalam, M. A., Shancita, I. (2016). Impact of fatty acid composition and physicochemical properties of Jatropha and Alexandrian laurel biodiesel blends: An analysis of performance and emission characteristics, Journal of Cleaner Production. 133(1181-1189), Article
  67. Sanjid, A., Kalam, M. A., Masjuki, H. H., Varman, M., Zulkifli, N., Abedin, M. J. (2016). Performance and emission of multi-cylinder diesel engine using biodiesel blends obtained from mixed inedible feedstocks, Journal of Cleaner Production. 112(4114-4122), Article
  68. Sazzad, B. S., Fazal, M. A., Haseeb, A., Masjuki, H. H. (2016). Retardation of oxidation and material degradation in biodiesel: a review, Rsc Advances. 6(6560244-60263), Review
  69. Sebayang, A. H., Masjuki, H. H., Ong, H. C., Dharma, S., Silitonga, A. S., Mahlia, T. M. I., Aditiya, H. B. (2016). A perspective on bioethanol production from biomass as alternative fuel for spark ignition engine, Rsc Advances. 6(1814964-14992), Review
  70. Shancita, I., Masjuki, H. H., Kalam, M. A., Reham, S. S., Shahir, S. A. (2016). Comparative Analysis on Property Improvement Using Fourier Transform Infrared Spectroscopy (FT-IR) and Nuclear Magnetic Resonance (NMR) (H-1 and C-13) Spectra of Various Biodiesel Blended Fuels, Energy Fuels. 30(64790-4805), Article
  71. Shancita, I., Masjuki, H. H., Kalam, M. A., Reham, S. S., Ruhul, A. M., Monirul, I. M. (2016). Evaluation of the characteristics of non-oxidative biodiesels: a FAME composition, thermogravimetric and IR analysis, Rsc Advances. 6(108198-8210), Article
  72. Silitonga, A. S., Masjuki, H. H., Ong, H. C., Kusumo, F., Mahlia, T. M. I., Bahar, A. H. (2016). Pilot-scale production and the physicochemical properties of palm and Calophyllum inophyllum biodiesels and their blends, Journal of Cleaner Production. 126(654-666), Article
  73. Silitonga, A. S., Masjuki, H. H., Ong, H. C., Yusaf, T., Kusumo, F., Mahlia, T. M. I. (2016). Synthesis and optimization of Hevea brasiliensis and Ricinus communis as feedstock for biodiesel production: A comparative study, Industrial Crops and Products. 85(274-286), Article
  74. Suganya, T., Varman, M., Masjuki, H. H., Renganathan, S. (2016). Macroalgae and microalgae as a potential source for commercial applications along with biofuels production: A biorefinery approach, Renewable Sustainable Energy Reviews. 55(909-941), Review
  75. Wakil, M. A., Kalam, M. A., Masjuki, H. H., Fattah, I. M. R. (2016). Rice bran: A prospective resource for biodiesel production in Bangladesh, International Journal of Green Energy. 13(5497-504), Article
  76. Zahid, R., Masjuki, H. H., Varman, M., Abul Kalam, M., Mufti, R. A., Zulkifli, N., Gulzar, M., Azman, S. (2016). Influence of intrinsic and extrinsic conditions on the tribological characteristics of diamond-like carbon coatings: A review, Journal of Materials Research. 31(131814-1836), Review
  77. Zulkifli, N. W. M., Azman, S. S. N., Kalam, M. A., Masjuki, H. H., Yunus, R., Gulzar, M. (2016). Lubricity of bio-based lubricant derived from different chemically modified fatty acid methyl ester, Tribology International. 93(555-562), Article
  78. Arslan, A., Masjuki, H. H., Varman, M., Kalam, M. A., Quazi, M. M., Al Mahmud, K. A. H., Gulzar, M., Habibullah, M. (2015). Effects of texture diameter and depth on the tribological performance of DLC coating under lubricated sliding condition, Applied Surface Science. 356(1135-1149), Article
  79. Teoh, Y. H., Masjuki, H. H., Kalam, M. A., How, H. G. (2015). Effect of injection timing and EGR on engine-out-responses of a common-rail diesel engine fueled with neat biodiesel, Rsc Advances. 5(11696080-96096), Article
  80. Yusoff, M. N. A. M.; Zulkifli, N. W. M.; Masum, B. M.; Masjuki, H. H. (2015). Feasibility of bioethanol and biobutanol as transportation fuel in spark-ignition engine: a review, RSC ADVANCES. 5(121), 100184-100211. doi:10.1039/c5ra12735a
Others
  1. A.Z. Syahir, M.H. Harith, NWM Zulkifli,. H.H Masjuki, M.A. Kalam, M.N.A.M. Yusoff, Z.M. Zulfattah, T.M. Ibrahim. (2020). Compatibility of Ionic Liquid With Glycerol Monooleate and Molybdenum Dithiocarbamate as Additives in Bio-Based Lubricant. Journal of Tribology. 142, pp.?????
  2. Cheah, MY; Ong, HC; Zulkifli, NWM; Masjuki, HH; Salleh, A .(2020). Physicochemical and tribological properties of microalgae oil as biolubricant for hydrogenpowered engine. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY Vol: 45 Issue: 42 Special Issue:SI, Pages: 22364-22381, Published:AUG 28 2020
  3. Gul, M., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Mujtaba, M. A. (2020). A Review: Role of fatty acid composition in characterizing potential feedstock for sustainable green lubricants by advance transesterification process and its global as well as Pakistani prospective. Bioenergy Research, 13(1), pp ????
  4. M. Shahabuddin, Md. Mofijur Rahman, M. A. Kalam, H.H. Masjuki. (2020). Study on the Friction and Wear Characteristics of Bio-lubricant Synthesized from Second Generation Jatropha Methyl Ester. Tribology in Industry, 42(1), 41-49.
  5. Silitonga, A.S., Shamsuddin, A.H., Mahlia, T.M.I., Milano, J., Kusumo, F., Siswantoro, J., Dharma, S., Sebayang, A.H., Masjuki, H.H., Ong, H.C, (2020), Biodiesel synthesis from Ceiba pentandra oil by microwave irradiation-assisted transesterification ELM modeling and optimization, Renewable Energy, 146, pp. 1278-1291.
  6. Tan, M.Y., Liza, S., Khadijah, S.M.P., Abas, A. A., Merican, A. M., Ayob, K. A., Zulkifli, N. W. M., Masjuki, H. H. (2020). Surface analysis of early retrieved polyethylene tibial inserts for both knees in total knee replacement. Engineering Failure Analysis, 109, art. no. 104279.
  7. Arslan, A., Masjuki, H.H., Quazi, M.M., Kalam, M.A., Varman, M., Jamshaid, M., Rahman, S.M.A., Imran, M., Zulfattah, Z.M., Anwar, M.T., Gohar, G.A., Mandalan, S.M., Harith, M.H, (2019), Experimental investigation of tribological properties of laser textured tungsten doped diamond like carbon coating under dry sliding conditions at various loads, Materials Research Express, 6 (10), art. no. 106444, .
  8. Arslan, A., Quazi, M.M., Masjuki, H.H., Kalam, M.A., Varman, M., Zulkifli, N.W.M., Jamshaid, M., Mandalan, S.M., Gohar, G.A., Gulzar, M., Alwi, A., Yarmand, H., Mustafa, M.S. (2019), Wear characteristics of patterned and un-patterned tetrahedral amorphous carbon film in the presence of synthetic and bio based lubricants, Materials Research Express, 6 (3), art. no. 036414.
  9. Gul, M., Masjuki, H.H., Kalam, M.A., Zulkifli, N.W.M., Mujtaba, M.A. (2019), A Review: Role of Fatty Acids Composition in Characterizing Potential Feedstock for Sustainable Green Lubricants by Advance Transesterification Process and its Global as Well as Pakistani Prospective, Bioenergy Research, . https://www.scopus.com/inward/record.uri?eid=2-s2.0-85074574060&doi=10.1007%2fs12155-019-10040-7&partnerID=40&md5 DOI: 10.1007/s12155-019-10040-7 Document Type: Review Publication Stage: Article in Press Source: Scopus
  10. How, H.G., Teoh, Y.H., Masjuki, H.H., Nguyen, H.-T., Kalam, M.A., Chuah, H.G., Alabdulkarem, A, (2019), Impact of two-stage injection fuel quantity on engine-out responses of a common-rail diesel engine fueled with coconut oil methyl esters-diesel fuel blends, Renewable Energy, 139, pp. 515-529.
  11. Jamshaid, M., Masjuki, H.H., Kalam, M.A., Zulkifli, N.W.M., Arslan, A., Alwi, A., Khuong, L.S., Alabdulkarem, A., Syahir, A.Z, (2019), Production optimization and tribological characteristics of cottonseed oil methyl ester, Journal of Cleaner Production, 209, pp. 62-73.
  12. Mannan, A., Sabri, M.F.M., Kalam, M.A., Masjuki, H.H. (2019), Tribological properties of steel/steel, steel/DLC and DLC/DLC contacts in the presence of biodegradable oil (2019), Journal of the Japan Petroleum Institute, 62 (1), pp. 11-18.
  13. Mazaheri, H., Ong, H.C., Masjuki, H.H., Arslan, A., Chong, W.T., Amini, Z. Friction and wear characteristics of rice bran oil based biodiesel using calcium oxide catalyst derived from Chicoreus Brunneus shell, Energy Sources, Part A: Recovery, Utilization and Environmental Effects,
  14. Tan, M.Y., Liza, S., Khadijah, S.M.P., Abbas, A.A., Merican, A.M., Ayob, K.A., Zulkifli, N.W.M., Masjuki, H.H. (2019), Surface analysis of early retrieved polyethylene tibial inserts for both knees in total knee replacement (2019) Engineering Failure Analysis,
  15. Zulfattah, Z.M., Zulkifli, N.W.M., Masjuki, H.H., Harith, M.H., Syahir, A.Z., Norain, I., Jumaidin, R., Yusoff, M.N.A.M., Alwi, A., Jamshaid, M., Arslan, A, (2019), Effect of bio-based lubricant towards emissions and engine breakdown due to spark plug fouling in a two-stroke engine, Journal of Cleaner Production, 221, pp. 215-223.
  16. How, H. G., Masjuki, H. H., Kalam, M. A., & Teoh, Y. H. (2018). Influence of injection timing and split injection strategies on performance, emissions, and combustion characteristics of diesel engine fueled with biodiesel blended fuels. Fuel, 213, 106-114.
  17. Mazaheri, H., Ong, H. C., Masjuki, H. H., Amini, Z., Harrison, M. D., Wang, C. T., ... & Alwi, A. (2018). Rice bran oil based biodiesel production using calcium oxide catalyst derived from Chicoreus brunneus shell. Energy, 144, 10-19.
  18. Milano, J., Ong, H. C., Masjuki, H. H., Silitonga, A. S., Chen, W. H., Kusumo, F., ... & Sebayang, A. H. (2018). Optimization of biodiesel production by microwave irradiation-assisted transesterification for waste cooking oil-Calophyllum inophyllum oil via response surface methodology. Energy Conversion and Management, 158, 400-415.
  19. Reddy, A. N. R., Saleh, A. A., Islam, M. S., Hamdan, S., Rahman, M. R., & Masjuki, H. H. (2018). Experimental evaluation of fatty acid composition influence on Jatropha biodiesel physicochemical properties. Journal of Renewable and Sustainable Energy, 10(1), 013103.
  20. Zainal, N. A., Zulkifli, N. W. M., Gulzar, M., & Masjuki, H. H. (2018). A review on the chemistry, production, and technological potential of bio-based lubricants. Renewable and Sustainable Energy Reviews, 82, 80-102.
  21. A.Z. Syahir, N.W.M. Zulkifli, H.H. Masjuki, M.A. Kalam, Abdullah Alabdulkarem, M. Gulzar, L.S. Khuong, M.H. Harith, A review on bio-based lubricants and their applications, In Journal of Cleaner Production, Volume 168, 2017, Pages 997-1016, ISSN
  22. Abdul Mannan, Mohd Faizul Mohd Sabri, Md. Abul Kalam, Masjuki Hj. Hassan, (2017), "Tribological properties of hydrogen free DLC in self-mated contacts against ZDDP-added Oil", Industrial Lubrication and Tribology, https://doi.org/10.1108/ILT-11-2016-0269
  23. Arslan, A., Masjuki, H. H., Kalam, M. A., Varman, M., Mosarof, M. H., Mufti, R. A., ... & Alabdulkarem, A. (2017). Investigation of laser texture density and diameter on the tribological behavior of hydrogenated DLC coating with line contact configuration. Surface and Coatings Technology, 322, 31-37.
  24. Blicharska M, Smithers RJ, Kuchler M, Agrawal GK, Gutierrez JM, Hassanali A, Huq S, Koller SH, Marjit S, Mshinda HM, Masjuki HH, Solomons NW, Staden JV, Mikusinski G (2017): Steps to overcome the North-South divide in research relevant to climate change policy and practice. Nature Clim. Change 7(1), 21-27
  25. Gulzar, M., Masjuki, H. H., Kalam, M. A., Varman, M., Zulkifli, N. W. M., Mufti, R. A., . . . Yunus, R. (2017). Dispersion Stability and Tribological Characteristics of TiO2/SiO2 Nanocomposite-Enriched Biobased Lubricant. Tribology Transactions, 60(4), 670-680.
  26. Gulzar, M; Masjuki, HH; Alabdulkarem, A; Kalam, MA; Varman, M; Zulkifli, NWM; Zahid, R; Yunus, R 2017. Chemically active oil filter to develop detergent free bio-based lubrication for diesel engine. ENERGY
  27. Imdadul, HK; Rashed, MM; Shahin, MM; Masjuki, HH; Kalam, MA; Kamruzzaman, M; Rashedul, HK 2017. Quality improvement of biodiesel blends using different promising fuel additives to reduce fuel consumption and NO emission from CI engine. ENERGY CONVERSION AND MANAGEMENT
  28. Imdadul, HK; Zulkifli, NWM; Masjuki, HH; Kalam, MA; Kamruzzaman, M; Rashed, MM; Rashedul, HK; Alwi, A 2017. Experimental assessment of non-edible candlenut biodiesel and its blend characteristics as diesel engine fuel. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
  29. Kalam, MA; Masjuki, HH; Cho, HM; Mosarof, MH; Mahmud, MI; Chowdhury, MA; Zulkifli, NWM 2017. Influences of thermal stability, and lubrication performance of biodegradable oil as an engine oil for improving the efficiency of heavy duty diesel engine. FUEL
  30. Khuong, LS; Masjuki, HH; Zulkifli, NWM; Mohamad, EN; Kalam, MA; Alabdulkarem, A; Arslan, A; Mosarof, MH; Syahir, AZ; Jamshaid, M 2017. Effect of gasoline-bioethanol blends on the properties and lubrication characteristics of commercial engine oil. RSC ADVANCES
  31. Kusumo, F., Silitonga, A. S., Masjuki, H. H., Ong, H. C., Siswantoro, J., & Mahlia, T. M. I. (2017). Optimization of transesterification process for Ceiba pentandra oil: A comparative study between kernel-based extreme learning machine and artificial neural networks. Energy, 134, 24-34.
  32. Kusumo, F., Silitonga, A. S., Ong, H. C., Masjuki, H. H., & Mahlia, T. M. I. (2017). A comparative study of ultrasound and infrared transesteri cation of Sterculia foetida oil for biodiesel production. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 39(13), 1339-1346.
  33. Laser Composite Surfacing of Ni-WC Coating on AA5083 for Enhancing Tribomechanical Properties MM Quazi, MA Fazal, A Haseeb, F Yusof, HH Masjuki, A Arslan, Tribology Transactions, 2017, 60 (2), 249-259
  34. M.N.A.M. Yusoff, N.W.M. Zulkifli, H.H. Masjuki, M.H. Harith, A.Z. Syahir, M.A. Kalam, M.F. Mansor, A. Azham, L.S. Khuong, Performance and emission characteristics of a spark ignition engine fuelled with butanol isomer-gasoline blends, In Transportation Research Part D: Transport and Environment, Volume 57, 2017, Pages 23-38, ISSN 1361-9209
  35. MH Elsheikh, MFM Sabri, SM Said, Y Miyazaki, HH Masjuki, DAA Shnawah, S Naito, MBA Bashir, Rapid preparation of bulk Al x Yb0.25Co4Sb12 (x = 0, 0.1, 0.2, 0.3) skutterudite thermoelectric materials with high figure of merit ZT = 1.36. Journal of Materials Science, 1-9. doi: 10.1007/s10853-017-0772-8 (2017)
  36. Mardhiah, HH; Ong, HC; Masjuki, HH; Lim, S; Pang, YL 2017. Investigation of carbon-based solid acid catalyst from Jatropha curcas biomass in biodiesel production. ENERGY CONVERSION AND MANAGEMENT
  37. Monirul, I. M., Kalam, M. A., Masjuki, H. H., Zulkifli, N. W. M., Shahir, S. A., Mosarof, M. H., & Ruhul, A. M. (2017). Influence of poly (methyl acrylate) additive on cold flow properties of coconut biodiesel blends and exhaust gas emissions. Renewable Energy, 101, 702-712.
  38. Monirul, IM; Masjuki, HH; Kalam, MA; Zulkifli, NWM; Shancita, I 2017. Influence of polymethyl acrylate additive on the formation of particulate matter and NOX emission of a biodiesel-diesel-fueled engine. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
  39. Nang Khin Chaw Sint, I.A. Choudhury, H.H. Masjuki, H. Aoyama, Theoretical analysis to determine the efficiency of a CuO-water nanofluid based-flat plate solar collector for domestic solar water heating system in Myanmar, Solar Energy, 155 (2017), 608 619
  40. Norjannah, B., Ong, H. C., & Masjuki, H. H. (2017). Effects of methanol and enzyme pretreatment to Ceiba pentandra biodiesel production. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 39(14), 1548-1555.
  41. Rashedul, HK; Kalam, MA; Masjuki, HH; Teoh, YH; How, HG; Monirul, IM; Imdadul, HK 2017. Attempts to minimize nitrogen oxide emission from diesel engine by using antioxidant-treated diesel-biodiesel blend. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
  42. Ruhul, A. M., Kalam, M. A., Masjuki, H. H., Shahir, S. A., Alabdulkarem, A., Teoh, Y. H., ... & Reham, S. S. (2017). Evaluating combustion, performance and emission characteristics of Millettia pinnata and Croton megalocarpus biodiesel blends in a diesel engine. Energy, 141, 2362-2376.
  43. Sebayang, A. H., Masjuki, H. H., Ong, H. C., Dharma, S., Silitonga, A. S., Kusumo, F., & Milano, J. (2017). Prediction of engine performance and emissions with Manihot glaziovii bioethanol Gasoline blended using extreme learning machine. Fuel, 210, 914-921.
  44. Sebayang, AH; Masjuki, HH; Ong, HC; Dharma, S; Silitonga, AS; Kusumo, F; Milano, J 2017. Optimization of bioethanol production from sorghum grains using artificial neural networks integrated with ant colony. INDUSTRIAL CROPS AND PRODUCTS
  45. Sharudin, H., Abdullah, N. R., Najafi, G., Mamat, R., & Masjuki, H. H. (2017). Investigation of the effects of iso-butanol additives on spark ignition engine fuelled with methanol-gasoline blends. Applied Thermal Engineering, 114, 593-600.
  46. Shuhimi, F. F., Abdollah, M. F. B., Kalam, M. A., Masjuki, H. H., Mustafa, A. e., Mat Kamal, S. E., & Amiruddin, H. (2017). Effect of operating parameters and chemical treatment on the tribological performance of natural fiber composites: A review. Particulate Science and Technology, 35(5), 512-524.
  47. Silitonga, A. S., Masjuki, H. H., Ong, H. C., Mahlia, T. M. I., & Kusumo, F. (2017). Optimization of extraction of lipid from Isochrysis galbana microalgae species for biodiesel synthesis. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 39(11), 1167-1175.
  48. Sundus, F., Fazal, M. A., & Masjuki, H. H. (2017). Effect of anti oxidants on the lubricity of B30 biodiesel diesel blend. Lubrication Science, 29(1), 3-15.
  49. Sundus, F., Fazal, M. A., & Masjuki, H. H. (2017). Tribology with biodiesel: A study on enhancing biodiesel stability and its fuel properties. Renewable and Sustainable Energy Reviews, 70, 399-412.
  50. Sundus, F., Masjuki, H. H., & Fazal, M. A. (2017). Analysis of Tribological Properties of Palm Biodiesel and Oxidized Biodiesel Blends. Tribology Transactions, 60(3), 530-536.
  51. Dharma, S., Ong, H. C., Masjuki, H. H., Sebayang, A. H., & Silitonga, A. S. (2016). An overview of engine durability and compatibility using biodiesel bioethanol diesel blends in compression-ignition engines. Energy Conversion and Management, 128, 66-81.
  52. Islam, M. M., Hassan, M. H., Kalam, M. A., Habibullah, M., & Hossain, M. M. (2016). Improvement of cold flow properties of Cocos nucifera and Calophyllum inophyllum biodiesel blends using polymethyl acrylate additive. Journal of Cleaner Production, 137, 322-329.
  53. Islam, M. T., Abdullah, A. B., Shahir, S. A., Kalam, M. A., Masjuki, H. H., Shumon, R., & Rashid, M. H. (2016). A public survey on knowledge, awareness, attitude and willingness to pay for WEEE management: Case study in Bangladesh. Journal of Cleaner Production, 137, 728-740.
  54. MH Elsheikh, MFM Sabri, SM Said, Y Miyazaki, HH Masjuki, DAA Shnawah, N Abdullah, S Naito, MBA Bashir, Microstructural Modification of Co4Sb12 Skutterudite Thermoelectric Material Through Al Exceed Doping, Science of Advanced Materials, 8, pp.2121-2127 (2016)
  55. A. Sanjid, H.H. Masjuki, M.A. Kalam, S.M.A. Rahman, M.J. Abedin, I.M.R. Fattah, Characterization and prediction of blend properties and evaluation of engine performance and emission parameters of a CI engine operated with various biodiesel blends, RSC Advances, 5 (2015) 13246-13255
  56. A.S. Silitonga, H.H. Masjuki, T.M. Indra Mahlia, Ong H.C., F. Kusumo, H.B Aditiya, N.N.N Ghazali (2015). Schleichera oleosa L oil as feedstock for biodiesel production, Fuel.
  57. Al Mahmud, K. A. H., Kalam, M. A., Masjuki, H. H., Abdollah, M. F. B. 2015. Tribological Study of a Tetrahedral Diamond-Like Carbon Coating under Vegetable Oil Based Lubricated Condition Tribology Transactions
  58. Al Mahmud, K. A. H., Kalam, M. A., Masjuki, H. H., Abdollah, M. F. B. 2015. Tribological Study of a Tetrahedral Diamond-Like Carbon Coating under Vegetable Oil-Based Lubricated Condition Tribology Transactions
  59. Al Mahmud, K. A. H., Kalam, M. A., Masjuki, H. H., Abdollah, M. F. B. 2015. Tribological Study of a Tetrahedral Diamond-Like Carbon Coating under Vegetable Oil-Based Lubricated Condition Tribology Transactions
  60. Al Mahmud, K. A. H., Kalam, M. A., Masjuki, H. H., Mobarak, H. M., Zulkifli, N. W. M. 2015. An updated overview of diamond-like carbon coating in tribology Critical Reviews in Solid State and Materials Sciences
  61. Arbab, M. I., Varman, M., Masjuki, H. H., Kalam, M. A., Imtenan, S., Sajjad, H., & Rizwanul Fattah, I. M. (2015). Evaluation of combustion, performance, and emissions of optimum palm coconut blend in turbocharged and non-turbocharged conditions of a diesel engine. Energy Conversion and Management, 90(0), 111-120. doi: http://dx.doi.org/10.1016/j.enconman.2014.11.017
  62. Arbab, M. I., Varman, M., Masjuki, H. H., Kalam, M. A., Imtenan, S., Sajjad, H., Fattah, I. M. R. 2015. Evaluation of combustion, performance, and emissions of optimum palm-coconut blend in turbocharged and non-turbocharged conditions of a diesel engine Energy Conversion and Management
  63. Ashraful, A. M., Masjuki, H. H., Kalam, M. A. 2015. Particulate matter, carbon emissions and elemental compositions from a diesel engine exhaust fuelled with diesel-biodiesel blends Atmospheric Environment. (Tier 1, Impact Factor = 3.281)
  64. Atabani, A. E., Badruddin, I. A., Masjuki, H. H., Chong, W. T., Lee, K. T. 2015. Pangium edule Reinw: A Promising Non-edible Oil Feedstock for Biodiesel Production Arabian Journal for Science and Engineering
  65. Ghazali, W., Mamat, R., Masjuki, H. H., Najafi, G. 2015. Effects of biodiesel from different feedstocks on engine performance and emissions: A review Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.901)
  66. Ghosh, S., Choudhury, D., Roy, T., Bin Mamat, A., Masjuki, H. H., Pingguan-Murphy, B. 2015. Tribological investigation of diamond-like carbon coated micro-dimpled surface under bovine serum and osteoarthritis oriented synovial fluid Science and Technology of Advanced Materials
  67. Ghosh, S., Choudhury, D., Roy, T., Bin Mamat, A., Masjuki, H. H., Pingguan-Murphy, B. 2015. Tribological investigation of diamond-like carbon coated micro-dimpled surface under bovine serum and osteoarthritis oriented synovial fluid Science and Technology of Advanced Materials
  68. Ghosh, S., Choudhury, D., Roy, T., Moradi, A., Masjuki, H. H., Pingguan-Murphy, B. 2015. Tribological performance of the biological components of synovial fluid in artificial joint implants Science and Technology of Advanced Materials
  69. Ghosh, S., Choudhury, D., Roy, T., Moradi, A., Masjuki, H. H., Pingguan-Murphy, B. 2015. Tribological performance of the biological components of synovial fluid in artificial joint implants Science and Technology of Advanced Materials
  70. Ghosh, S., Choudhury, D., Roy, T., Moradi, A., Masjuki, H. H., Pingguan-Murphy, B. 2015. Tribological performance of the biological components of synovial fluid in artificial joint implants Science and Technology of Advanced Materials
  71. Gulzar, M., Masjuki, H. H., Kalam, M. A., Varman, M., Fattah, I. M. R. 2015. Oil filter modification for biodiesel-fueled engine: A pathway to lubricant sustainability and exhaust emissions reduction Energy Conversion and Management
  72. Gulzar, M., Masjuki, H. H., Varman, M., Kalam, M. A., Mufti, R. A., Zulkifli, N. W. M., Yunus, R., Zahid, R. 2015. Improving the AW/EP ability of chemically modified palm oil by adding CuO and MoS2 nanoparticles Tribology International
  73. H. Sajjad , H. H. Masjuki, M. Varman, M. A. Kalam, M. I. Arbab, S. Imtenan, and A. M. Ashraful. "Influence of gas-to-liquid (GTL) fuel in the blends of Calophyllum inophyllum biodiesel and diesel: An analysis of combustion performance emission characteristics." Energy Conversion and Management 97 (2015): 42-52.
  74. Habibullah, M., Fattah, I. M. R., Masjuki, H. H., Kalam, M. A. 2015. Effects of Palm-Coconut Biodiesel Blends on the Performance and Emission of a Single-Cylinder Diesel Engine Energy Fuels
  75. Habibullah, M., Masjuki, H. H., Kalam, M. A., Gulzar, M., Arslan, A., Zahid, R. 2015. Tribological Characteristics of Calophyllum inophyllum Based TMP (Trimethylolpropane) Ester as Energy-Saving and Biodegradable Lubricant Tribology Transactions
  76. Habibullah, M., Masjuki, H. H., Kalam, M. A., Gulzar, M., Arslan, A., Zahid, R. 2015. Tribological Characteristics of Calophyllum inophyllum-Based TMP (Trimethylolpropane) Ester as Energy-Saving and Biodegradable Lubricant Tribology Transactions
  77. Habibullah, M., Masjuki, H. H., Kalam, M. A., Rahman, S. M. A., Mofijur, M., Mobarak, H. M., Ashraful, A. M. 2015. Potential of biodiesel as a renewable energy source in Bangladesh Renewable Sustainable Energy Reviews
  78. Habibullah, M., Masjuki, H. H., Kalam, M. A., Rahman, S. M. A., Mofijur, M., Mobarak, H. M., & Ashraful, A. M. (2015). Potential of biodiesel as a renewable energy source in Bangladesh. Renewable and Sustainable Energy Reviews, 50(0), 819-834.
  79. Habibullah, M., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Masum, B. M., Arslan, A., Gulzar, M. 2015. Friction and wear characteristics of Calophyllum inophyllum biodiesel Industrial Crops and Products
  80. Habibullah, M., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Masum, B. M., Arslan, A., & Gulzar, M. (2015). Friction and wear characteristics of Calophyllum inophyllum biodiesel. Industrial Crops and Products, 76, 188-197.
  81. Hntenan, S., Rahman, S. M. A., Masjuki, H. H., Varman, M., Kalam, M. A. 2015. Effect of dynamic injection pressure on performance, emission and combustion characteristics of a compression ignition engine Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.901)
  82. Hossain, S., Masjuki, H. H., Varman, M., Kalam, M. A., Rahman, S. M. A. 2015. Comparative evaluation of the blends of gas-to-liquid (GTL) fuels and biodiesels with diesel at high idling conditions: an in-depth analysis on engine performance and environment pollutants Rsc Advances
  83. Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Rashed, M. M., Rashedul, H. K., . . . Mosarof, M. H. (2015). A comprehensive review on the assessment of fuel additive effects on combustion behavior in CI engine fuelled with diesel biodiesel blends. [10.1039/C5RA09563H]. RSC Advances, 5(83), 67541-67567.
  84. Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Rashed, M. M., Rashedul, H. K., Monirul, I. M., Mosarof, M. H. 2015. A comprehensive review on the assessment of fuel additive effects on combustion behavior in CI engine fuelled with diesel biodiesel blends Rsc Advances
  85. Imtenan, S., Masjuki, H. H., Varman, M., Fattah, I. M. R. 2015. Evaluation of n-butanol as an oxygenated additive to improve combustion-emission-performance characteristics of a diesel engine fuelled with a diesel-calophyllum inophyllum biodiesel blend Rsc Advances
  86. Imtenan, S., Masjuki, H. H., Varman, M., Fattah, I. M. R., Sajjad, H., Arbab, M. I. 2015. Effect of n-butanol and diethyl ether as oxygenated additives on combustion-emission-performance characteristics of a multiple cylinder diesel engine fuelled with diesel-jatropha biodiesel blend Energy Conversion and Management
  87. K.A.H. Al Mahmud, M.A. Kalam, H.H. Masjuki, H.M. Mobarak, N.W.M. Zulkifli, An updated overview of diamond-like carbon coating in tribology, Critical Reviews in Solid State and Materials Sciences, 40 (2014) 90-118.
  88. M. Gulzar, H.H. Masjuki, M. Varman, M.A. Kalam, R.A. Mufti, N.W.M. Zulkifli, R. Yunus, R. Zahid, Improving the AW/EP ability of chemically modified palm oil by adding CuO and MoS2 nanoparticles, Tribology International.
  89. M. Gulzar, H.H. Masjuki, M.A. Kalam, M. Varman, I.M. Rizwanul Fattah, Oil filter modification for biodiesel fueled engine: A pathway to lubricant sustainability and exhaust emissions reduction, Energy Conversion and Management, 91 (2015) 168-175.
  90. M. Habibullah, I.M. Rizwanul Fattah, H.H. Masjuki, M.A. Kalam, Effects of Palm Coconut Biodiesel Blends on the Performance and Emission of a Single-Cylinder Diesel Engine, Energy & Fuels, 29 (2015) 734-743
  91. M. Mofijur, H.H. Masjuki, M.A. Kalam, S.M. Ashrafur Rahman, H.M. Mahmudul, Energy scenario and biofuel policies and targets in ASEAN countries, Renewable and Sustainable Energy Reviews, 46 (2015) 51-61
  92. M.A. Wakil, M.A. Kalam, H.H. Masjuki, A.E. Atabani, I.M. Rizwanul Fattah, Influence of biodiesel blending on physicochemical properties and importance of mathematical model for predicting the properties of biodiesel blend, Energy Conversion and Management, 94 (2015) 51-67.
  93. Masum, B. M., Masjuki, H. H., Kalam, M. A., Palash, S. M., & Habibullah, M. (2015). Effect of alcohol gasoline blends optimization on fuel properties, performance and emissions of a SI engine. Journal of Cleaner Production, 86(0), 230-237. doi: http://dx.doi.org/10.1016/j.jclepro.2014.08.032
  94. Masum, S. M., Masjuki, H. H., Kalam, M. A., Palash, S. M., Habibullah, M. 2015. Effect of alcohol-gasoline blends optimization on fuel properties, performance and emissions of a SI engine Journal of Cleaner Production
  95. Mofijur, M., Masjuki, H. H., Kalam, M. A., Rahman, S. M. A., Mahmudul, H. M. 2015. Energy scenario and biofuel policies and targets in ASEAN countries Renewable Sustainable Energy Reviews
  96. Mofijur, M., Masjuki, H. H., Kalam, M. A., Rahman, S. M. A., Mahmudul, H. M. 2015. Energy scenario and biofuel policies and targets in ASEAN countries Renewable Sustainable Energy Reviews
  97. Monirul, I. M., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Rashedul, H. K., Rashed, M. M., Imdadul, H. K., Mosarof, M. H. 2015. A comprehensive review on biodiesel cold flow properties and oxidation stability along with their improvement processes Rsc Advances
  98. Mosarof, M. H., Kalam, M. A., Masjuki, H. H., Ashraful, A. M., Rashed, M. M., Imdadul, H. K., Monirul, I. M. 2015. Implementation of palm biodiesel based on economic aspects, performance, emission, and wear characteristics Energy Conversion and Management
  99. N Abdullah, MH Elsheikh, NMJ Nik Ibrahim, S Mohd Said, MF Mohd Sabri, HH Masjuki and A Marlina, Magnetic, thermal, mesomorphic and thermoelectric properties of mononuclear, dimeric and polymeric iron(II) complexes with conjugated ligands, RSC Adv., 2015, DOI: 10.1039/C5RA07100C (2015)
  100. Palash, S. M., Masjuki, H. H., Kalam, M. A., Atabani, A. E., Fattah, I. M. R., Sanjid, A. 2015. Biodiesel production, characterization, diesel engine performance, and emission characteristics of methyl esters from Aphanamixis polystachya oil of Bangladesh Energy Conversion and Management
  101. R. Zahid, H.H. Masjuki, M. Varman, R. Mufti, M.A. Kalam, M. Gulzar, Effect of Lubricant Formulations on the Tribological Performance of Self-Mated Doped DLC Contacts: a review, Tribol Lett, 58 (2015) 1-28
  102. Rashed, M. M., Kalam, M. A., Masjuki, H. H., Rashedul, H. K., Ashraful, A. M., Shancita, I., Ruhul, A. M. 2015. Stability of biodiesel, its improvement and the effect of antioxidant treated blends on engine performance and emission Rsc Advances
  103. Rashed, M. M., Kalam, M. A., Masjuki, H. H., Rashedul, H. K., Ashraful, A. M., Shancita, I., & Ruhul, A. M. (2015). Stability of biodiesel, its improvement and the effect of antioxidant treated blends on engine performance and emission. RSC Advances, 5(46),36240-36261.
  104. Rashedul, H. K., Masjuki, H. H., Kalam, M. A., Teoh, Y. H., How, H. G., Fattah, I. M. R. 2015. Effect of antioxidant on the oxidation stability and combustion-performance-emission characteristics of a diesel engine fueled with diesel-biodiesel blend Energy Conversion and Management. (Tier 1, Impact Factor = 4.380)
  105. Reham, S. S., Masjuki, H. H., Kalam, M. A., Shancita, I., Fattah, I. M. R., Ruhul, A. M. 2015. Study on stability, fuel properties, engine combustion, performance and emission characteristics of biofuel emulsion Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.901)
  106. Ruhul, A. M., Kalam, M. A., Masjuki, H. H., Fattah, I. M. R., Reham, S. S., Rashed, M. M. 2015. State of the art of biodiesel production processes: a review of the heterogeneous catalyst Rsc Advances. (Tier 1, Impact Factor = 3.840)
  107. S. Hossain, H.H. Masjuki, M. Varman, M.A. Kalam, S.M.A. Rahman, Comparative evaluation of the blends of gas-to-liquid (GTL) fuels and biodiesels with diesel at high idling conditions: an in-depth analysis on engine performance and environment pollutants, RSC Advances, 5 (2015) 13068-13077
  108. S. Imtenan, H.H. Masjuki, M. Varman, I.M. Rizwanul Fattah, Evaluation of n-butanol as an oxygenated additive to improve combustion-emission-performance characteristics of a diesel engine fuelled with a diesel-calophyllum inophyllum biodiesel blend, RSC Advances, 5 (2015) 17160-17170
  109. S. Imtenan, H.H. Masjuki, M. Varman, I.M. Rizwanul Fattah, H. Sajjad, M.I. Arbab, Effect of n-butanol and diethyl ether as oxygenated additives on combustion emission-performance characteristics of a multiple cylinder diesel engine fuelled with diesel jatropha biodiesel blend, Energy Conversion and Management, 94 (2015) 84-94
  110. S.A. Shahir, H.H. Masjuki, M.A. Kalam, A. Imran, A.M. Ashraful, Performance and emission assessment of diesel biodiesel ethanol/bioethanol blend as a fuel in diesel engines: A review, Renewable and Sustainable Energy Reviews, 48 (2015) 62-78.
  111. S.M. Palash, H.H. Masjuki, M.A. Kalam, A.E. Atabani, I.M. Rizwanul Fattah, A. Sanjid, Biodiesel production, characterization, diesel engine performance, and emission characteristics of methyl esters from Aphanamixis polystachya oil of Bangladesh, Energy Conversion and Management, 91 (2015) 149-157.
  112. Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., Ashraful, A. M. 2015. Influence of gas-to-liquid (GTL) fuel in the blends of Calophyllum inophyllum biodiesel and diesel: An analysis of combustion-performance-emission characteristics Energy Conversion and Management
  113. Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., Ashraful, A. M. 2015. Influence of gas-to-liquid (GTL) fuel in the blends of Calophyllum inophyllum biodiesel and diesel: An analysis of combustion-performance-emission characteristics Energy Conversion and Management
  114. Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., Rashedul, H. K. 2015. Influence of gas-to-liquid (GTL) fuel in the combined blend of Jatropha biodiesel and diesel: an analysis of engine combustion-performance-emission parameters Rsc Advances
  115. Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., Rashedul, H. K. 2015. Influence of gas-to-liquid (GTL) fuel in the combined blend of Jatropha biodiesel and diesel: an analysis of engine combustion-performance-emission parameters Rsc Advances
  116. Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., & Rashedul, H. K. (2015). Influence of gas-to-liquid (GTL) fuel in the combined blend of Jatropha biodiesel and diesel: an analysis of engine combustion-performance-emission parameters. RSC Advances, 5(38), 29723-29733.
  117. Sanjid, A., Kalam, M. A., Masjuki, H. H., Varman, M., Zulkifli, N. W. B. M., & Abedin, M. J. Performance and emission of multi-cylinder diesel engine using biodiesel blends obtained from mixed inedible feedstocks. Journal of Cleaner Production. doi: http://dx.doi.org/10.1016/j.jclepro.2015.07.154
  118. Sanjid, A., Masjuki, H. H., Kalam, M. A., Rahman, S. M. A., Abedin, M. J., Fattah, I. M. R. 2015. Characterization and prediction of blend properties and evaluation of engine performance and emission parameters of a CI engine operated with various biodiesel blends Rsc Advances
  119. Silitonga, A. S., Masjuki, H. H., Mahlia, T. M. I., Ong, H. C., Kusumo, F., Aditiya, H. B., Ghazali, N. N. N. 2015. Schleichera oleosa L oil as feedstock for biodiesel production Fuel
  120. Teoh, Y. H., Masjuki, H. H., Kalam, M. A., How, H. G. 2015. Comparative assessment of performance, emissions and combustion characteristics of gasoline/diesel and gasoline/biodiesel in a dual-fuel engine Rsc Advances
  121. Teoh, Y. H., Masjuki, H. H., Noor, I. M., Ali, B. S., Kalam, M. A., How, H. G. 2015. Evaluation of a novel biofuel from unwanted waste and its impact on engine performance, emissions, and combustion characteristics in a diesel engine Rsc Advances
  122. Teoh, Y. H., Masjuki, H. H., Noor, I. M., Ali, B. S., Kalam, M. A., & How, H. G. (2015). Evaluation of Novel Biofuel from Unwanted Waste and its Impact on Engine Performance, Emissions, and Combustion Characteristics in a Diesel Engine. RSC Advances.
  123. Wakil, M. A., Kalam, M. A., Masjuki, H. H., Atabani, A. E., Fattah, I. M. R. 2015. Influence of biodiesel blending on physicochemical properties and importance of mathematical model for predicting the properties of biodiesel blend Energy Conversion and Management
  124. Wakil, M. A., Kalam, M. A., Masjuki, H. H., Atabani, A. E., Fattah, I. M. R. 2015. Influence of biodiesel blending on physicochemical properties and importance of mathematical model for predicting the properties of biodiesel blend Energy Conversion and Management
  125. Wakil, M. A., Masjuki, H. H., Kalam, M. A., Teoh, Y. H., How, H. G., Imtenan, S. 2015. Influence of engine operating variable on combustion to reduce exhaust emissions using various biodiesels blend Rsc Advances. (Tier 1, Impact Factor = 3.840)
  126. Wan Ghazali, W. N. M., Mamat, R., Masjuki, H. H., & Najafi, G. (2015). Effects of biodiesel from different feedstocks on engine performance and emissions: A review. Renewable and Sustainable Energy Reviews, 51, 585-602.
  127. Zahid, R., Masjuki, H. H., Varman, M., Mufti, R. A., Kalam, M. A., Gulzar, M. 2015. Effect of Lubricant Formulations on the Tribological Performance of Self-Mated Doped DLC Contacts: a review Tribology Letters
  128. A. Sanjid, H.H. Masjuki, M.A. Kalam, S.M.A. Rahman, M.J. Abedin, S.M. Palash, Production of palm and jatropha based biodiesel and investigation of palm- jatropha combined blend properties, performance, exhaust emission and noise in an unmodified diesel engine, Journal of Cleaner Production, 65 (2014) 295- 303.
  129. A. Sanjid, M.A. Kalam, H.H. Masjuki, S.M.A. Rahman, M.J. Abedin, Combustion, performance and emission characteristics of a DI diesel engine fueled with Brassica juncea methyl ester and its blends, RSC Advances, 4 (2014) 36973-36982
  130. A.M. Ashraful, H.H. Masjuki, M.A. Kalam, I.M. Rizwanul Fattah, S. Imtenan, S.A. Shahir, H.M. Mobarak, Production and comparison of fuel properties, engine performance, and emission characteristics of biodiesel from various non-edible vegetable oils: A review, Energy Conversion and Management, 80 (2014) 202-228.
  131. A.M. Ashraful, H.H. Masjuki, M.A. Kalam, S.M.A. Rahman, M. Habibullah, M. Syazwan, Study of the Effect of Storage Time on the Oxidation and Thermal Stability of Various Biodiesels and Their Blends, Energy & Fuels, 28 (2014) 1081-1089.
  132. Abdullah, M. Adlan, Farid Nasir Ani, and Masjuki Hassan. "Performance and Emission of a Common Rail Passenger Car Engine Fuelled with Palm Oil Biodiesel." In Applied Mechanics and Materials, vol. 564, pp. 66- 71. 2014.
  133. Abdullah, Muhammad Ilman Hakimi Chua, Mohd Fadzli Bin Abdollah, Hilmi Amiruddin, Noreffendy Tamaldin, Nur Rashid Mat Nuri, Masjuki Hassan, and S. A. Rafeq. "Improving Engine Oil Properties by Dispersion of hBN/Al2O3 Nanoparticles." In Applied Mechanics and Materials, vol. 607, pp. 70-73. 2014.
  134. Abedin, M. J., Masjuki, H. H., Kalam, M. A., Sanjid, A., & Ashraful, A. M. (2014). Combustion, performance, and emission characteristics of low heat rejection engine operating on various biodiesels and vegetable oils. Energy Conversion and Management, 85(0), 173-189. doi: http://dx.doi.org/10.1016/j.enconman.2014.05.065
  135. Abedin, M. J., Masjuki, H. H., Kalam, M. A., Sanjid, A., Rahman, S. M. A., & Fattah, I. M. R. (2014). Performance, emissions, and heat losses of palm and jatropha biodiesel blends in a diesel engine. Industrial Crops and Products, 59(0), 96-104. doi: http://dx.doi.org/10.1016/j.indcrop.2014.05.001
  136. Abedin, M. J., Masjuki, H. H., Kalam, M. A., Sanjid, A., Ashraful, A. M. 2014. Combustion, performance, and emission characteristics of low heat rejection engine operating on various biodiesels and vegetable oils Energy Conversion and Management. (Tier 1, Impact Factor = 3.59)
  137. Abedin, M. J., Masjuki, H. H., Kalam, M. A., Sanjid, A., Rahman, S. M. A., Fattah, I. M. R. 2014. Performance, emissions, and heat losses of palm and jatropha biodiesel blends in a diesel engine Industrial Crops and Products. (Tier 1, Impact Factor = 3.208)
  138. Abedin, M. J., Masjuki, H. H., Kalam, M. A., Varman, M., Arbab, M. I., Fattah, I. M. R., Masum, B. M. 2014. Experimental Investigation of a Multicylinder Unmodified Diesel Engine Performance, Emission, and Heat Loss Characteristics Using Different Biodiesel Blends: Rollout of B10 in Malaysia Scientific World Journal. (Tier 2, Impact Factor = 1.219)
  139. Ahamed, J. U., Saidur, R., Masjuki, H. H. 2014. Investigation of Environmental and Heat Transfer Analysis of Air Conditioner Using Hydrocarbon Mixture Compared to R-22 Arabian Journal for Science and Engineering
  140. Ahmed, S., Hassan, M. H., Kalam, M. A., Ashrafur Rahman, S. M., Abedin, M. J., & Shahir, A. (2014). An experimental investigation of biodiesel production, characterization, engine performance, emission and noise of Brassica juncea methyl ester and its blends. Journal of Cleaner Production, 79(0), 74-81. doi: http://dx.doi.org/10.1016/j.jclepro.2014.05.019
  141. Ahmed, S., Hassan, M. H., Kalam, M. A., Rahman, S. M. A., Abedin, M. J., Shahir, A. 2014. An experimental investigation of biodiesel production, characterization, engine performance, emission and noise of Brassica juncea methyl ester and its blends Journal of Cleaner Production. (Tier 1, Impact Factor = 3.59)
  142. Al Mahmud, K. A. H., M. A. Kalam, M. F. M. Sabri, H. H. Masjuki, and M. M. Rashed. "Tribological Characteristics of Tetrahedral (ta-C) DLC Coating in the Presence of Commercial Lubricating Oil." In Applied Mechanics and Materials, vol. 679, pp. 25- 29. 2014.
  143. Al Mahmud, K. A. H., Varman, M., Kalam, M. A., Masjuki, H. H., Mobarak, H. M., Zulkifli, N. W. M. 2014. Tribological characteristics of amorphous hydrogenated (a-C:H) and tetrahedral (ta-C) diamond-like carbon coating at different test temperatures in the presence of commercial lubricating oil Surface Coatings Technology. (Tier 1, Impact Factor = 2.199)
  144. Arbab, M. I., Masjuki, H. H., Varman, M., Kalam, M. A., Sajjad, H., Imtenan, S. 2014. Performance and emission characteristics of a diesel engine fueled by an optimum biodiesel-biodiesel blend Rsc Advances. (Tier 1, Impact Factor = 3.708)
  145. Ashraful, A. M., Masjuki, H. H., Kalam, M. A., Rashedul, H. K., Sajjad, H., & Abedin, M. J. (2014). Influence of anti-corrosion additive on the performance, emission and engine component wear characteristics of an IDI diesel engine fueled with palm biodiesel. Energy Conversion and Management, 87(0), 48-57. doi: http://dx.doi.org/10.1016/j.enconman.2014.06.093
  146. Ashraful, A. M., Masjuki, H. H., Kalam, M. A., Rashedul, H. K., Sajjad, H., Abedin, M. J. 2014. Influence of anti-corrosion additive on the performance, emission and engine component wear characteristics of an IDI diesel engine fueled with palm biodiesel Energy Conversion and Management. (Tier 1, Impact Factor = 3.59)
  147. Atabani, A. E., Irfan Anjum Badruddin, H. H. Masjuki, W. T. Chong, and Keat Teong Lee. "Pangium edule Reinw: A Promising Non-edible Oil Feedstock for Biodiesel Production." Arabian Journal for Science and Engineering (2014): 1-12.
  148. Atabani, A. E., Mofijur, M., Masjuki, H. H., Badruddin, I. A., Kalam, M. A., & Chong, W. T. (2014). Effect of Croton megalocarpus, Calophyllum inophyllum, Moringa oleifera, palm and coconut biodiesel diesel blending on their physico-chemical properties. Industrial Crops and Products, 60(0), 130-137. doi: http://dx.doi.org/10.1016/j.indcrop.2014.06.011
  149. Atabani, A. E., Mofijur, M., Masjuki, H. H., Badruddin, I. A., Kalam, M. A., Chong, W. T. 2014. Effect of Croton megalocarpus, Calophyllum inophyllum, Moringa oleifera, palm and coconut biodiesel-diesel blending on their physico-chemical properties Industrial Crops and Products. (Tier 1, Impact Factor = 3.208)
  150. B.M. Masum, M.A. Kalam, H.H. Masjuki, S.M. Palash, I.M.R. Fattah, Performance and emission analysis of a multi cylinder gasoline engine operating at different alcohol-gasoline blends, RSC Advances, 4 (2014) 27898- 27904
  151. B.M. Masum, M.A. Kalam, H.H. Masjuki, S.M.A. Rahman, E.E. Daggig, Impact of denatured anhydrous ethanol- gasoline fuel blends on a spark-ignition engine, RSC Advances, 4 (2014) 51220-51227
  152. B.M. Masum, M.A. Kalam, H.H. Masjuki, S.M.A. Rahman, E.E. Daggig, Impact of denatured anhydrous ethanol- gasoline fuel blends on a spark-ignition engine, RSC Advances, 4 (2014) 51220-51227
  153. B.M. Masum, M.A. Kalam, H.H. Masjuki, S.M.A. Rahman, E.E. Daggig, Impact of denatured anhydrous ethanol- gasoline fuel blends on a spark-ignition engine, RSC Advances, 4 (2014) 51220-51227
  154. Fattah, I. M. R., Hassan, M. H., Kalam, M. A., Atabani, A. E., Abedin, M. J. 2014. Synthetic phenolic antioxidants to biodiesel: path toward NOx reduction of an unmodified indirect injection diesel engine Journal of Cleaner Production. (Tier 1, Impact Factor = 3.59)
  155. Fattah, I. M. R., Kalam, M. A., Masjuki, H. H., Wakil, M. A. 2014. Biodiesel production, characterization, engine performance, and emission characteristics of Malaysian Alexandrian laurel oil Rsc Advances
  156. Fattah, I. M. R., Masjuki, H. H., Kalam, M. A., Masum, B. M. 2014. Effect of synthetic antioxidants on storage stability of Calophyllum inophyllum biodiesel Materials Research Innovations. (Tier 4, Impact Factor = 0.473)
  157. Fattah, I. M. R., Masjuki, H. H., Kalam, M. A., Hazrat, M. A., Masum, B. M., Imtenan, S., Ashraful, A. M. 2014. Effect of antioxidants on oxidation stability of biodiesel derived from vegetable and animal based feedstocks Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.51)
  158. Fattah, I. M. R., Masjuki, H. H., Kalam, M. A., Mofijur, M., Abedin, M. J. 2014. Effect of antioxidant on the performance and emission characteristics of a diesel engine fueled with palm biodiesel blends Energy Conversion and Management. (Tier 1, Impact Factor = 3.59)
  159. Fattah, I. M. R., Masjuki, H. H., Kalam, M. A., Wakil, M. A., Ashraful, A. M., Shahir, S. A. 2014. Experimental investigation of performance and regulated emissions of a diesel engine with Calophyllum inophyllum biodiesel blends accompanied by oxidation inhibitors Energy Conversion and Management. (Tier 1, Impact Factor = 3.59)
  160. Fazal, M. A., Haseeb, A., Masjuki, H. H. 2014. A critical review on the tribological compatibility of automotive materials in palm biodiesel Energy Conversion and Management. (Tier 1, Impact Factor = 3.59)
  161. Golshokouh, I., Syahrullail, S., Ani, F. N., Masjuki, H. H. 2014. INVESTIGATION OF PALM FATTY ACID DISTILLATE OIL AS AN ALTERNATIVE TO PETROCHEMICAL- BASED LUBRICANTS Journal of Oil Palm Research
  162. H. Sajjad, H.H. Masjuki, M. Varman, M.A. Kalam, M.I. Arbab, S. Imtenan, M.M. Rashed, Comparative study of gas-to-liquid fuel, B5 diesel and their blends with respect to fuel properties, engine performance and exhaust emissions, RSC Advances, 4 (2014) 44529-44536.
  163. H. Sajjad, H.H. Masjuki, M. Varman, M.M.R. Khan, M.I. Arbab, S. Imtenan, A. Sanjid, Comparative Study of Biodiesel, GTL Fuel and Their Blends in Context of Engine Performance and Exhaust Emission, Procedia Engineering, 90 (2014) 466-471
  164. H.C. Ong, H.H. Masjuki, T.M.I. Mahlia, A.S. Silitonga, W.T. Chong, K.Y. Leong, Optimization of biodiesel production and engine performance from high free fatty acid Calophyllum inophyllum oil in CI diesel engine, Energy Conversion and Management, 81 (2014) 30-40.
  165. H.M. Mobarak, E. Niza Mohamad, H.H. Masjuki, M.A. Kalam, K.A.H. Al Mahmud, M. Habibullah, A.M. Ashraful, The prospects of biolubricants as alternatives in automotive applications, Renewable and Sustainable Energy Reviews, 33 (2014) 34-43
  166. H.M. Mobarak, H.H. Masjuki, E.N. Mohamad, S.M.A. Rahman, K.A.H.A. Mahmud, M. Habibullah, S. Salauddin, Effect of DLC Coating on Tribological Behavior of Cylinder Liner-piston Ring Material Combination When Lubricated with Jatropha Oil, Procedia Engineering, 90 (2014) 733-739
  167. Habibullah, M., H. H. Masjuki, M. A. Kalam, A. M. Ashraful, K. A. H. Al Mahmud, and H. M. Mobarak. "Comparative Study of Properties and Engine Performance Using Blend of Palm and Coconut Biodiesel." In Applied Mechanics and Materials, vol. 663, pp. 13-18. 2014.
  168. Habibullah, M., Masjuki, H. H., Kalam, M. A., Rizwanul Fattah, I. M., Ashraful, A. M., & Mobarak, H. M. (2014). Biodiesel production and performance evaluation of coconut, palm and their combined blend with diesel in a single-cylinder diesel engine. Energy Conversion and Management, 87(0), 250-257. doi: http://dx.doi.org/10.1016/j.enconman.2014.07.006
  169. Habibullah, M., Masjuki, H. H., Kalam, M. A., Fattah, I. M. R., Ashraful, A. M., Mobarak, H. M. 2014. Biodiesel production and performance evaluation of coconut, palm and their combined blend with diesel in a single-cylinder diesel engine Energy Conversion and Management. (Tier 1, Impact Factor = 3.59)
  170. How, H. G., H. H. Masjuki, M. A. Kalam, and Y. H. Teoh. "Effect of Ethanol-Coconut Oil Methyl Ester on the Performance, Emission and Combustion Characteristics of a High-Pressure Common-Rail DI Engine." In Applied Mechanics and Materials, vol. 663, pp. 19-25. 2014.
  171. How, H. G., Masjuki, H. H., Kalam, M. A., Teoh, Y. H. 2014. An investigation of the engine performance, emissions and combustion characteristics of coconut biodiesel in a high-pressure common-rail diesel engine Energy
  172. How, H. G., Masjuki, H. H., Kalam, M. A., & Teoh, Y. H. An investigation of the engine performance, emissions and combustion characteristics of coconut biodiesel in a high-pressure common-rail diesel engine. Energy(0). doi:http://dx.doi.org/10.1016/j.energy.2014.03.070
  173. I.M. Rizwanul Fattah, H.H. Masjuki, M.A. Kalam, M. Mofijur, M.J. Abedin, Effect of antioxidant on the performance and emission characteristics of a diesel engine fueled with palm biodiesel blends, Energy Conversion and Management, 79 (2014) 265-272.
  174. I.M. Rizwanul Fattah, H.H. Masjuki, M.A. Kalam, M.A. Wakil, H.K. Rashedul, M.J. Abedin, Performance and emission characteristics of a CI engine fueled with Cocos nucifera and Jatropha curcas B20 blends accompanying antioxidants, Industrial Crops and Products, Volume 57, June 2014, Pages 132-140, ISSN 0926-6690,
  175. I.M. Rizwanul Fattah, H.H. Masjuki, M.A. Kalam, M.A. Hazrat, B.M. Masum, S. Imtenan, A.M. Ashraful, Effect of antioxidants on oxidation stability of biodiesel derived from vegetable and animal based feedstocks, Renewable and Sustainable Energy Reviews, 30 (2014) 356-370.
  176. Imtenan, S., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Sajjad, H., & Ashrafur Rahman, S. M. (2014). Impact of oxygenated additives to palm and jatropha biodiesel blends in the context of performance and emissions characteristics of a light-duty diesel engine. Energy Conversion and Management, 83(0), 149- 158. doi:http://dx.doi.org/10.1016/j.enconman.2014.03.052
  177. Imtenan, S., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Sajjad, H., Rahman, S. M. A. 2014. Impact of oxygenated additives to palm and jatropha biodiesel blends in the context of performance and emissions characteristics of a light-duty diesel engine Energy Conversion and Management. (Tier 1, Impact Factor = 3.59)
  178. Imtenan, S., Varman, M., Masjuki, H. H., Kalam, M. A., Sajjad, H., Arbab, M. I., Fattah, I. M. R. 2014. Impact of low temperature combustion attaining strategies on diesel engine emissions for diesel and biodiesels: A review Energy Conversion and Management. (Tier 1, Impact Factor = 3.59)
  179. K.A.H. Al Mahmud, M. Varman, M.A. Kalam, H.H. Masjuki, H.M. Mobarak, N.W.M. Zulkifli, Tribological characteristics of amorphous hydrogenated (a-C:H) and tetrahedral (ta-C) diamond-like carbon coating at different test temperatures in the presence of commercial lubricating oil, Surface and Coatings Technology.
  180. Liaquat, A. M., Masjuki, H. H., Kalam, M. A., Fattah, I. M. R. 2014. Impact of biodiesel blend on injector deposit formation Energy. (Tier 1, Impact Factor = 4.159)
  181. Liaquat, A. M., Masjuki, H. H., Kalam, M. A., & Rizwanul Fattah, I. M. (2014). Impact of biodiesel blend on injector deposit formation. Energy, 72(0), 813-823. doi: http://dx.doi.org/10.1016/j.energy.2014.06.006
  182. Liza, S., Haseeb, A., Masjuki, H. H. 2014. Wear behaviour of PMMA against 316L stainless steel under dry and lubricated conditions Industrial Lubrication and Tribology. (Tier 4, Impact Factor = 0.316)
  183. M. Habibullah, H.H. Masjuki, M.A. Kalam, A.M. Ashraful, M.A. Habib, H.M. Mobarak, Effect of Bio- Lubricant on Tribological Characteristics of Steel, Procedia Engineering, 90 (2014) 740-745
  184. M. Hamid Elsheikh, D.A. Shnawah, M.F.M. Sabri, S.B.M. Said, M. Haji Hassan, M.B. Ali Bashir, M. Mohamad, A review on thermoelectric renewable energy: Principle parameters that affect their performance, Renewable and Sustainable Energy Reviews, 30 (2014) 337-355.
  185. M.A. Fazal, A.S.M.A. Haseeb, H.H. Masjuki, A critical review on the tribological compatibility of automotive materials in palm biodiesel, Energy Conversion and Management, 79 (2014) 180-186.
  186. M.A. Wakil, M.A. Kalam, H.H. Masjuki, I.M. Rizwanul Fattah, B.M. Masum, Evaluation of rice bran, sesame and moringa oils as feasible sources of biodiesel and the effect of blending on their physicochemical properties, RSC Advances, 4 (2014) 56984-56991
  187. M.M. Rahman, M.H. Hassan, M.A. Kalam, A.E. Atabani, L.A. Memon, S.M.A. Rahman, Performance and emission analysis of Jatropha curcas and Moringa oleifera methyl ester fuel blends in a multi-cylinder diesel engine, Journal of Cleaner Production, 65 (2014) 304-310.
  188. MLA Abdullah, M. Adlan, Farid Nasir Ani, and Masjuki Hassan. "The Effects of Injection Parameters on the Performance of Common Rail Light Duty Engine Fueled with Palm Oil Biodiesel." Applied Mechanics and Materials 465 (2014): 322-326.
  189. Masum, B. M., Kalam, M. A., Masjuki, H. H., Rahman, S. M. A., Daggig, E. E. 2014. Impact of denatured anhydrous ethanol-gasoline fuel blends on a spark-ignition engine Rsc Advances. (Tier 1, Impact Factor = 3.708)
  190. Masum, B. M., Masjuki, H. H., Kalam, M. A., Palash, S. M., Wakil, M. A., & Imtenan, S. (2014). Tailoring the key fuel properties using different alcohols (C2 C6) and their evaluation in gasoline engine. Energy Conversion and Management, 88(0), 382-390. doi: http://dx.doi.org/10.1016/j.enconman.2014.08.050
  191. Masum, B. M., Masjuki, H. H., Kalam, M. A., Palash, S. M., Wakil, M. A., Imtenan, S. 2014. Tailoring the key fuel properties using different alcohols (C-2-C-6) and their evaluation in gasoline engine Energy Conversion and Management. (Tier 1, Impact Factor = 3.59)
  192. Mobarak, H. M., Masjuki, H. H., Mohamad, E. N., Kalam, M. A., Rashedul, H. K., Rashed, M. M., & Habibullah, M. Tribological properties of amorphous hydrogenated (a-C:H) and hydrogen-free tetrahedral (ta-C) diamond-like carbon coatings under jatropha biodegradable lubricating oil at different temperatures. Applied Surface Science(0). doi: http://dx.doi.org/10.1016/j.apsusc.2014.08.168
  193. Mobarak, H. M., Masjuki, H. H., Mohamad, E. N., Kalam, M. A., Rashedul, H. K., Rashed, M. M., Habibullah, M. 2014. Tribological properties of amorphous hydrogenated (a-C:H) and hydrogen-free tetrahedral (ta-C) diamond-like carbon coatings under jatropha biodegradable lubricating oil at different temperatures Applied Surface Science. (Tier 1, Impact Factor = 2.538)
  194. Mofijur M, Masjuki HH, Kalam MA, Atabani AE, Fattah IMR, Mobarak HM. (2014) Comparative evaluation of performance and emission characteristics of Moringa oleifera and Palm oil based biodiesel in a diesel engine. Industrial Crops and Products, 53;78-84.
  195. Mofijur, M., Masjuki, H. H., Kalam, M. A., Atabani, A. E., Arbab, M. I., Cheng, S. F., & Gouk, S. W. (2014). Properties and use of Moringa oleifera biodiesel and diesel fuel blends in a multi-cylinder diesel engine. Energy Conversion and Management, 82(0), 169-176. doi: http://dx.doi.org/10.1016/j.enconman.2014.02.073
  196. Mofijur, M., Masjuki, H. H., Kalam, M. A., Atabani, A. E., Fattah, I. M. R., Mobarak, H. M. 2014. Comparative evaluation of performance and emission characteristics of Moringa oleifera and Palm oil based biodiesel in a diesel engine Industrial Crops and Products. (Tier 1, Impact Factor = 3.208)
  197. N.W.M. Zulkifli, H.H. Masjuki, M.A. Kalam, R. Yunus, S.S.N. Azman. Lubricity of bio-based lubricant derived from chemically modified jatropha methyl ester. Jurnal Tribologi. 1: 18-39.
  198. Ong, H. C., Masjuki, H. H., Mahlia, T. M. I., Silitonga, A. S., Chong, W. T., Yusaf, T. 2014. Engine performance and emissions using Jatropha curcas, Ceiba pentandra and Calophyllum inophyllum biodiesel in a CI diesel engine Energy
  199. Palash, S. M., Kalam, M. A., Masjuki, H. H., Arbab, M. I., Masum, B. M., Sanjid, A. 2014. Impacts of NOx reducing antioxidant additive on performance and emissions of a multi-cylinder diesel engine fueled with Jatropha biodiesel blends Energy Conversion and Management. (Tier 1, Impact Factor = 3.59)
  200. Rahman, M. M., Hassan, M. H., Kalam, M. A., Atabani, A. E., Memon, L. A., Rahman, S. M. A. 2014. Performance and emission analysis of Jatropha curcas and Moringa oleifera methyl ester fuel blends in a multi-cylinder diesel engine Journal of Cleaner Production. (Tier 1, Impact Factor = 3.59)
  201. Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Abedin, M. J., Sanjid, A., Imtenan, S. 2014. Effect of idling on fuel consumption and emissions fueled by Jatropha biodiesel blends of a diesel engine Journal of Cleaner Production
  202. Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Abedin, M. J., Sanjid, A., & Rahman, M. M. (2014). Assessing idling effects on a compression ignition engine fueled with Jatropha and Palm biodiesel blends. Renewable Energy, 68(0), 644-650. doi: http://dx.doi.org/10.1016/j.renene.2014.02.050
  203. Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Abedin, M. J., Sanjid, A., Rahman, M. M. 2014. Assessing idling effects on a compression ignition engine fueled with Jatropha and Palm biodiesel blends Renewable Energy. (Tier 2, Impact Factor = 3.361)
  204. Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Sanjid, A., & Abedin, M. J. (2014). Assessment of emission and performance of compression ignition engine with varying injection timing. Renewable and Sustainable Energy Reviews, 35(0), 221-230. doi: http://dx.doi.org/10.1016/j.rser.2014.03.049
  205. Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Sanjid, A., Abedin, M. J. 2014. Assessment of emission and performance of compression ignition engine with varying injection timing Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.51)
  206. Rahman, SM Ashrafur, Hassan Masjuki, Md Kalam, M. J. Abedin, A. Sanjid, S. Imtenan, and M. I. Arbab. Assessing Effects of Idling of a Diesel Engine Operated with Optimized Blend of Palm and Mustard Biodiesel. No. 2014-01-1936. SAE Technical Paper, 2014.
  207. Rashedul, H. K., Kalam, M. A., Masjuki, H. H., Ashraful, A. M., Imtenan, S., Sajjad, H., & Wee, L. K. (2014). Numerical study on convective heat transfer of a spark ignition engine fueled with bioethanol. International Communications in Heat and Mass Transfer, 58(0), 33-39. doi: http://dx.doi.org/10.1016/j.icheatmasstransfer.2014.0 8.019
  208. Rashedul, H. K., Kalam, M. A., Masjuki, H. H., Ashraful, A. M., Imtenan, S., Sajjad, H., Wee, L. K. 2014. Numerical study on convective heat transfer of a spark ignition engine fueled with bioethanol International Communications in Heat and Mass Transfer. (Tier 1, Impact Factor = 2.124)
  209. Rashedul, H. K., Masjuki, H. H., Kalam, M. A., Ashraful, A. M., Ashrafur Rahman, S. M., & Shahir, S. A. (2014). The effect of additives on properties, performance and emission of biodiesel fuelled compression ignition engine. Energy Conversion and Management, 88(0), 348-364. doi: http://dx.doi.org/10.1016/j.enconman.2014.08.034
  210. Rashedul, H. K., Masjuki, H. H., Kalam, M. A., Ashraful, A. M., Rahman, S. M. A., Shahir, S. A. 2014. The effect of additives on properties, performance and emission of biodiesel fuelled compression ignition engine Energy Conversion and Management. (Tier 1, Impact Factor = 3.59)
  211. Rashedul, H. K., Masjuki, H. H., Kalam, M. A., Ashraful, A. M., Rashed, M. M., Sanchita, I., Shaon, T. 2014. Performance and emission characteristics of a compression ignition engine running with linseed biodiesel Rsc Advances. (Tier 1, Impact Factor = 3.708)
  212. Rizwanul Fattah, I. M., H. H. Masjuki, M. A. Kalam, and B. M. Masum. "Effect of synthetic antioxidants on storage stability of Calophyllum inophyllum biodiesel." Materials Research Innovations 18, no. S6 (2014): S6-90.
  213. Rizwanul Fattah, I. M., Hassan, M. H., Kalam, M. A., Atabani, A. E., & Abedin, M. J. (2014). Synthetic phenolic antioxidants to biodiesel: path toward NOx reduction of an unmodified indirect injection diesel engine. Journal of Cleaner Production, 79(0), 82-90. doi: http://dx.doi.org/10.1016/j.jclepro.2014.05.071
  214. Rizwanul Fattah, I. M., Masjuki, H. H., Kalam, M. A., Wakil, M. A., Ashraful, A. M., & Shahir, S. A. (2014). Experimental investigation of performance and regulated emissions of a diesel engine with Calophyllum inophyllum biodiesel blends accompanied by oxidation inhibitors. Energy Conversion and Management, 83(0), 232-240. doi: http://dx.doi.org/10.1016/j.enconman.2014.03.069
  215. S. Imtenan, H.H. Masjuki, M. Varman, M.I. Arbab, H. Sajjad, I.M.R. Fattah, M.J. Abedin, A.S.M. Hasib, Emission and Performance Improvement Analysis of Biodiesel-diesel Blends with Additives, Procedia Engineering, 90 (2014) 472-477
  216. S. Imtenan, M. Varman, H.H. Masjuki, M.A. Kalam, H. Sajjad, M.I. Arbab, I.M. Rizwanul Fattah, Impact of low temperature combustion attaining strategies on diesel engine emissions for diesel and biodiesels: A review, Energy Conversion and Management, 80 (2014) 329-356.
  217. S.A. Shahir, H.H. Masjuki, M.A. Kalam, A. Imran, I.M.R. Fattah, A. Sanjid, Feasibility of diesel biodiesel ethanol/bioethanol blend as existing CI engine fuel: An assessment of properties, material compatibility, safety and combustion, Renewable and Sustainable Energy Reviews, 32 (2014) 379-395.
  218. S.M. Palash, M.A. Kalam, H.H. Masjuki, M.I. Arbab, B.M. Masum, A. Sanjid, Impacts of NOx reducing antioxidant additive on performance and emissions of a multi-cylinder diesel engine fueled with Jatropha biodiesel blends, Energy Conversion and Management, 77 (2014) 577-585.
  219. S.M.A. Rahman, H.H. Masjuki, M.A. Kalam, M.J. Abedin, A. Sanjid, S. Imtenan, Effect of idling on fuel consumption and emissions of a diesel engine fueled by Jatropha biodiesel blends, Journal of Cleaner Production.
  220. Sajjad H, Masjuki HH, Varman M, Kalam MA, Arbab MI, Imtenan S, et al. Engine combustion, performance and emission characteristics of gas to liquid (GTL) fuels and its blends with diesel and bio-diesel. Renewable and Sustainable Energy Reviews. 2014;30(0):961-86.
  221. Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., Rahman, S. M. A. 2014. Engine combustion, performance and emission characteristics of gas to liquid (GTL) fuels and its blends with diesel and bio-diesel Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.51)
  222. Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., Rashed, M. M. 2014. Comparative study of gas-to-liquid fuel, B5 diesel and their blends with respect to fuel properties, engine performance and exhaust emissions Rsc Advances. (Tier 1, Impact Factor = 3.708)
  223. Sanjid, A., Kalam, M. A., Masjuki, H. H., Rahman, S. M. A., Abedin, M. J. 2014. Combustion, performance and emission characteristics of a DI diesel engine fueled with Brassica juncea methyl ester and its blends Rsc Advances. (Tier 1, Impact Factor = 3.708)
  224. Sanjid, A., Masjuki, H. H., Kalam, M. A., Abedin, M. J., & Rahman, S. M. A. (2014). Experimental Investigation of Mustard Biodiesel Blend Properties, Performance, Exhaust Emission and Noise in an Unmodified Diesel Engine. APCBEE Procedia, 10(0), 149-153. doi: http://dx.doi.org/10.1016/j.apcbee.2014.10.033
  225. Shafie, S. M., Masjuki, H. H., Mahlia, T. M. I. 2014. Rice straw supply chain for electricity generation in Malaysia: Economical and environmental assessment Applied Energy. (Tier 1, Impact Factor = 5.261)
  226. Shafie, S. M., Masjuki, H. H., & Mahlia, T. M. I. (2014b). Rice straw supply chain for electricity generation in Malaysia: Economical and environmental assessment. Applied Energy, 135(0), 299-308. doi: http://dx.doi.org/10.1016/j.apenergy.2014.08.101
  227. Shafie, S. M., Masjuki, H. H., & Mahlia, T. M. I. Life cycle assessment of rice straw-based power generation in Malaysia. Energy(0). doi: http://dx.doi.org/10.1016/j.energy.2014.04.014
  228. Shahir, S. A., Masjuki, H. H., Kalam, M. A., Imran, A., Fattah, I. M. R., Sanjid, A. 2014. Feasibility of diesel-biodiesel-ethanol/bioethanol blend as existing CI engine fuel: An assessment of properties, material compatibility, safety and combustion Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.51)
  229. Shancita, I., Masjuki, H. H., Kalam, M. A., Fattah, I. M. R., Rashed, M. M., Rashedul, H. K. 2014. A review on idling reduction strategies to improve fuel economy and reduce exhaust emissions of transport vehicles Energy Conversion and Management. (Tier 1, Impact Factor = 3.59)
  230. Shancita, I., Masjuki, H. H., Kalam, M. A., Rizwanul Fattah, I. M., Rashed, M. M., & Rashedul, H. K. (2014). A review on idling reduction strategies to improve fuel economy and reduce exhaust emissions of transport vehicles. Energy Conversion and Management, 88(0), 794-807. doi: http://dx.doi.org/10.1016/j.enconman.2014.09.036
  231. Silitonga, A. S., Hwai Chyuan Ong, T. M. I. Mahlia, H. H. Masjuki, and W. T. Chong. "Biodiesel Conversion from High FFA Crude Jatropha Curcas, Calophyllum Inophyllum and Ceiba Pentandra Oil." Energy Procedia 61 (2014): 480-483.
  232. Teoh, Y. H., H. H. Masjuki, M. A. Kalam, M. A. Amalina, and H. G. How. "Impact of Premixed Kerosene Fuel on Performance, Emission and Combustion Characteristics in Partial HCCI Engine." Energy Procedia 61 (2014): 1830-1834.
  233. Teoh, Y. H., Masjuki, H. H., Kalam, M. A., Amalina, M. A., How, H. G. 2014. Effects of Jatropha biodiesel on the performance, emissions, and combustion of a converted common-rail diesel engine Rsc Advances
  234. Wakil, M. A., Kalam, M. A., Masjuki, H. H., Fattah, I. M. R., Masum, B. M. 2014. Evaluation of rice bran, sesame and moringa oils as feasible sources of biodiesel and the effect of blending on their physicochemical properties Rsc Advances. (Tier 1, Impact Factor = 3.708)
  235. Zulkifli, N. W. M., M. A. Kalam, H. H. Masjuki, K. A. H. Al Mahmud, and R. Yunus. "The effect of palm oil trimethylolpropane ester on extreme pressure lubrication." Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 228, no. 2 (2014): 160-169.
  236. A. Sanjid, H.H. Masjuki, M.A. Kalam, S.M.A. Rahman, M.J. Abedin, S.M. Palash, Impact of palm, mustard, waste cooking oil and Calophyllum inophyllum biofuels on performance and emission of CI engine, Renewable and Sustainable Energy Reviews, 27 (2013) 664-682.
  237. A.S. Silitonga, H.H. Masjuki, T.M.I. Mahlia, H.C. Ong, W.T. Chong, Experimental study on performance and exhaust emissions of a diesel engine fuelled with Ceiba pentandra biodiesel blends, Energy Conversion and Management, 76 (2013) 828-836.
  238. Al Mahmud, K. A. H., Zulkifli, N. W. M., Masjuki, H. H., Varman, M., Kalam, M. A., Mobarak, H. M., . . . Shahir, S. A. (2013). Working Temperature Effect of A- C: H/A-C: H and Steel/Steel Contacts on Tribo Properties in Presence of Sunflower Oil as a Bio Lubricant. Procedia Engineering, 68(0), 550-557. doi: http://dx.doi.org/10.1016/j.proeng.2013.12.220
  239. Alam, T., Mahmud, K. H. A. A., Hasan, M. F., Shahir, S. A., Masjuki, H. H., Kalam, M. A., . . . Mobarak, H. M. (2013). Effect of Magnesia on Zinc Oxide Stabilized Nano Alumina Ceramic Powder in Sintering Process and its Impact on Mechanical Properties. Procedia Engineering, 68(0), 723-729. doi: http://dx.doi.org/10.1016/j.proeng.2013.12.245
  240. Arbab, M. I., Masjuki, H. H., Varman, M., Kalam, M. A., Imtenan, S., & Sajjad, H. (2013). Fuel properties, engine performance and emission characteristic of common biodiesels as a renewable and sustainable source of fuel. Renewable and Sustainable Energy Reviews, 22(0), 133-147. doi: http://dx.doi.org/10.1016/j.rser.2013.01.046
  241. Asrul, M., Zulkifli, N. W. M., Masjuki, H. H., & Kalam, M. A. (2013). Tribological Properties and Lubricant Mechanism of Nanoparticle in Engine Oil. Procedia Engineering, 68(0), 320-325. doi: http://dx.doi.org/10.1016/j.proeng.2013.12.186
  242. Atabani, A. E., Badruddin, I. A., Mahlia, T. M. I., Masjuki, H. H., Mofijur, M., Lee, K. T., Chong, W. T. 2013. Fuel Properties of Croton megalocarpus, Calophyllum inophyllum, and Cocos nucifera (coconut) Methyl Esters and their Performance in a Multicylinder Diesel Engine Energy Technology. (Tier N, Impact Factor = N/A)
  243. Atabani, A. E., Mahlia, T. M. I., Anjum Badruddin, I., Masjuki, H. H., Chong, W. T., & Lee, K. T. (2013). Investigation of physical and chemical properties of potential edible and non-edible feedstocks for biodiesel production, a comparative analysis. Renewable and Sustainable Energy Reviews, 21(0), 749-755. doi: http://dx.doi.org/10.1016/j.rser.2013.01.027
  244. Atabani, A. E., Mahlia, T. M. I., Masjuki, H. H., Badruddin, I. A., Yussof, H. W., Chong, W. T. and Lee, K. T. A comparative evaluation of physical and chemical properties of biodiesel synthesized from edible and non-edible oils and study on the effect of biodiesel blending. Energy.
  245. B. Rismanchi, R. Saidur, H.H. Masjuki, T.M.I. Mahlia. 2013. Modelling and Simulation to Determine the Potential Energy Savings by Implementing Cold Thermal Energy Storage System in Office Buildings. Energy conversion and management75:152-161
  246. Chew, K. V., Haseeb, A. S. M. A., Masjuki, H. H., Fazal, M. A., & Gupta, M. Corrosion of magnesium and aluminum in palm biodiesel: A comparative evaluation. Energy(0). doi: http://dx.doi.org/10.1016/j.energy.2013.04.067
  247. Fazal, M. A., Haseeb, A. S. M. A. & Masjuki, H. H. 2013. Corrosion mechanism of copper in palm biodiesel, Corrosion Science 67 (2013) 50-59.
  248. Fazal, M. A., Haseeb, A. S. M. A., Masjuki, H. H. 2013. Investigation of Friction and Wear Characteristics of Palm Biodiesel, Energy Conversion and Management 67 (2013) 251- 256
  249. H.H. Masjuki, M.A. Kalam, M. Mofijur, M. Shahabuddin, Biofuel: Policy, Standardization and Recommendation for Sustainable Future Energy Supply, Energy Procedia, 42 (2013) 577-586.
  250. Hassan, M. H. and Kalam, M. A. 2013. An Overview of Biofuel as a Renewable Energy Source: Development and Challenges. Procedia Engineering 56, 39-53.
  251. Hussan, M. J., Hassan, M. H., Kalam, M. A., & Memon, L. A. (2013). Tailoring key fuel properties of diesel biodiesel ethanol blends for diesel engine. Journal of Cleaner Production, 51(0), 118-125. doi: http://dx.doi.org/10.1016/j.jclepro.2013.01.023
  252. Imran, A., Masjuki, H. H., Kalam, M. A., Varman, M., Hasmelidin, M., Mahmud, K. A. H. A., . . . Habibullah, M. (2013). Study of Friction and Wear Characteristic of Jatropha Oil Blended Lube Oil. Procedia Engineering, 68(0), 178-185. doi: http://dx.doi.org/10.1016/j.proeng.2013.12.165
  253. Imran, A., Varman, M., Masjuki, H. H. and Kalam, M. A. 2013. Review on alcohol fumigation on diesel engine: A viable alternative dual fuel technology for satisfactory engine performance and reduction of environment concerning emission. Renewable and Sustainable Energy Reviews, 26, October 2013: 739-751.
  254. Liaquat, A. M., Masjuki, H. H., Kalam, M. A., Fattah, I. M. R., Hazrat, M. A., Varman, M., Mofijur, M. and Shahabuddin, M. 2013. Effect of Coconut Biodiesel Blended Fuels on Engine Performance and Emission Characteristics. Procedia Engineering, 56(2013), 583-590.
  255. Liaquat, A. M., Masjuki, H. H., Kalam, M. A., Fazal, M. A., Khan, A. F., Fayaz, H. and Varman, M. 2013. Impact of palm biodiesel blend on injector deposit formation. Applied Energy, 111, November 2013: 882-893
  256. M Palash, S., Kalam, M. A., Masjuki, H. H., Masum, B. M., Rizwanul Fattah, I. M., & Mofijur, M. (2013). Impacts of biodiesel combustion on NOx emissions and their reduction approaches. Renewable and Sustainable Energy Reviews, 23(0), 473-490. doi: http://dx.doi.org/10.1016/j.rser.2013.03.003
  257. M. Mofijur, H.H. Masjuki, M.A. Kalam, A.E. Atabani, M. Shahabuddin, S.M. Palash, M.A. Hazrat, Effect of biodiesel from various feedstocks on combustion characteristics, engine durability and materials compatibility: A review, Renewable and Sustainable Energy Reviews, 28 (2013) 441-455.
  258. M.J. Abedin, H.H. Masjuki, M.A. Kalam, A. Sanjid, S.M. Ashrafur Rahman, B.M. Masum, 2013. Energy balance of internal combustion engines using alternative fuels. Renewable and Sustainable Energy Reviews,26(0):20 33. http://dx.doi.org/10.1016/j.rser.2013.05.049
  259. Masum, B. M., Masjuki, H. H., Kalam, M. A., Rizwanul Fattah, I. M., Palash, S. M., & Abedin, M. J. (2013). Effect of ethanol gasoline blend on NOx emission in SI engine. Renewable and Sustainable Energy Reviews, 24(0), 209-222. doi: http://dx.doi.org/10.1016/j.rser.2013.03.046
  260. Mofijur, M., Atabani, A. E., Masjuki, H. H., Kalam, M. A., & Masum, B. M. (2013). A study on the effects of promising edible and non-edible biodiesel feedstocks on engine performance and emissions production: A comparative evaluation. Renewable and Sustainable Energy Reviews, 23(0), 391-404. doi: http://dx.doi.org/10.1016/j.rser.2013.03.009
  261. Mofijur, M., Masjuki, H. H., Kalam, M. A., & Atabani, A. E. Evaluation of biodiesel blending, engine performance and emissions characteristics of Jatropha curcas methyl ester: Malaysian perspective. Energy(0)(In Press, Corrected Proof). doi: http://dx.doi.org/10.1016/j.energy.2013.02.059
  262. Non-edible vegetable oils: A critical evaluation of oil extraction, fatty acid compositions, biodiesel production, characteristics, engine performance and emissions production Renewable and Sustainable Energy Reviews, Volume 18, February 2013, Pages 211-245 A.E. Atabani, A.S. Silitonga, H.C. Ong, T.M.I. Mahlia, H.H. Masjuki, Irfan Anjum Badruddin, H. Fayaz
  263. Ong, H. C., Silitonga, A. S., Masjuki, H. H., Mahlia, T. M. I., Chong, W. T., & Boosroh, M. H. (2013). Production and comparative fuel properties of biodiesel from non-edible oils: Jatropha curcas, Sterculia foetida and Ceiba pentandra. Energy Conversion and Management, 73(0), 245-255. doi: http://dx.doi.org/10.1016/j.enconman.2013.04.011
  264. Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Abedin, M. J., Sanjid, A., & Sajjad, H. (2013). Impact of idling on fuel consumption and exhaust emissions and available idle-reduction technologies for diesel vehicles A review. Energy Conversion and Management, 74(0), 171-182. doi: http://dx.doi.org/10.1016/j.enconman.2013.05.019
  265. Rizwanul Fattah, I.M., Masjuki, H.H., Liaquat, A.M., Ramli, R., Kalam, M.A. & Riazuddin, V.N. "Impact of various biodiesel fuels obtained from edible and non-edible oils on engine exhaust gas and noise emissions", Renewable and Sustainable Energy Reviews, vol18, p.552-567, 2013.
  266. S. Liza , A. S. M. A. Haseeb , H. H. Masjuki & A. A Abbas (2013): The Wear Behavior of Cross-Linked UHMWPE under Dry and Bovine Calf Serum Lubricated Conditions, Tribology Transactions, 56:1, 130-140
  267. S.C. Pang, H.H. Masjuki, M.A. Kalam, M.A. Hazrat, Liquid absorption and solid adsorption system for household, industrial and automobile applications: A review, Renewable and Sustainable Energy Reviews, 28 (2013) 836-847.
  268. S.M. Palash, H.H. Masjuki, M.A. Kalam, B.M. Masum, A. Sanjid, M.J. Abedin, State of the art of NOx mitigation technologies and their effect on the performance and emission characteristics of biodiesel-fueled Compression Ignition engines, Energy Conversion and Management, 76 (2013) 400-420.
  269. S.M.A. Rahman, H.H. Masjuki, M.A. Kalam, M.J. Abedin, A. Sanjid, H. Sajjad, Production of palm and Calophyllum inophyllum based biodiesel and investigation of blend performance and exhaust emission in an unmodified diesel engine at high idling conditions, Energy Conversion and Management, 76 (2013) 362-367.
  270. Shafie, S. M., Mahlia, T. M. I. and Masjuki, H. H. 2013. Life cycle assessment of rice straw co-firing with coal power generation in Malaysia. Energy, 57, 1 August 2013: 284-294.
  271. Shahabuddin, M., Masjuki, H. H. and Kalam, M. A. (2013) 'Experimental Investigation into Tribological Characteristics of Bio-Lubricant Formulated from Jatropha Oil', Procedia Engineering, 56(0), 597-606.
  272. Shahabuddin, M., Masjuki, H. H., Kalam, M. A., Bhuiya, M. M. K., & Mehat, H. (2013). Comparative tribological investigation of bio-lubricant formulated from a non-edible oil source (Jatropha oil). Industrial Crops and Products, 47, 323-330.
  273. Shahabuddin, M.,Liaquat,A.M.,Masjuki,H.H.,Kalam, M.A, Mofijur,M.,2013.Ignition delay, combustion and emission characteristics of diesel engine fueled with biodiesel. Renewable and Sustainable Energy Reviews, 21:623-632
  274. Silitonga, A. S., Masjuki, H. H., Mahlia, T. M. I., Ong, H. C., Atabani, A. E., & Chong, W. T. (2013). A global comparative review of biodiesel production from jatropha curcas using different homogeneous acid and alkaline catalysts: Study of physical and chemical properties. Renewable and Sustainable Energy Reviews, 24(0), 514-533. doi: http://dx.doi.org/10.1016/j.rser.2013.03.044
  275. Silitonga, A. S., Masjuki, H. H., Mahlia, T. M. I., Ong, H. C., Chong, W. T., & Boosroh, M. H. (2013). Overview properties of biodiesel diesel blends from edible and non-edible feedstock. Renewable and Sustainable Energy Reviews, 22(0), 346-360. doi: http://dx.doi.org/10.1016/j.rser.2013.01.055
  276. Silitonga, A. S., Ong, H. C., Mahlia, T. M. I., Masjuki, H. H. and Chong, W. T. 2013.Characterization and production of Ceiba pentandra biodiesel and its blends. Fuel, 108, 855-858.
  277. Silitonga, A. S., Ong, H. C., Masjuki, H. H., Mahlia, T. M. I., Chong, W. T., & Yusaf, T. F. Production of biodiesel from Sterculia foetida and its process optimization. Fuel(0). doi: http://dx.doi.org/10.1016/j.fuel.2013.03.051
  278. Zulkifli NWM, Kalam MA, Masjuki HH, Shahabuddin M, Yunus R. Wear prevention characteristics of a palm oil-based TMP (trimethylolpropane) ester as an engine lubricant. Energy. 2013, vol54, p.167-173.
  279. Zulkifli, N. W. M., Kalam, M. A., Masjuki, H. H., & Yunus, R. (2013). Experimental Analysis of Tribological Properties of Biolubricant with Nanoparticle Additive. Procedia Engineering, 68(0), 152-157. doi: http://dx.doi.org/10.1016/j.proeng.2013.12.161
  280. AHAMED, J. U., SAIDUR, R., MASJUKI, H. H. & SATTAR, M. A. 2012. AN ANALYSIS OF ENERGY, EXERGY, AND SUSTAINABLE DEVELOPMENT OF A VAPOR COMPRESSION REFRIGERATION SYSTEM USING HYDROCARBON. International Journal of Green Energy, 9(7):702-717.
  281. Adnan, R., Masjuki, H.H.& Mahlia, T.M.I.2012. Performance and emission analysis of hydrogen fueled compression ignition engine with variable water injection timing.ENERGY 43 (1) Pages: 416-426
  282. Atabani, A.E., Silitonga, A.S., Badruddin, I.A., Mahlia, T.M.I., Masjuki, H.H., Mekhilef, S.2012. A comprehensive review on biodiesel as an alternative energy resource and its characteristics. Renewable and Sustainable Energy Reviews. Volume 16, Issue 4,Pages 2070-2093
  283. Bhuiya, MMK; Chowdhury, MSU ; Ahamed, JU; Khan, MJH; Sarkar, MAR ; Kalam, MA; Masjuki, HH ; Shahabuddin, M (2012) Heat transfer performance for turbulent flow through a tube using double helical tape inserts. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER 39(6):818-825
  284. Bushroa, A.R., Rahbari, R.G., Masjuki, H.H., Muhamad, M.R.2012. Approximation of crystallite size and microstrain via XRD line broadening analysis in TiSiN thin films. Vacuum. Volume 86, Issue 8, Pages 1107 1112
  285. Fazal, M. A., Haseeb, A. S. M. A. & Masjuki. H. H. 2012. Degradation of automotive materials in palm biodiesel. Energy 40:76-83.
  286. H.C. Ong, T.M.I. Mahlia, H.H. Masjuki,(2012),A review on energy pattern and policy for transportation sector in Malaysia, Renewable and Sustainable Energy Reviews, Volume 16, Issue 1,Pages 532-542
  287. H.G. How, Y.H. Teoh, H.H. Masjuki, M.A. Kalam,2012. Impact of coconut oil blends on particulate-phase PAHs and regulated emissions from a light duty diesel engine, Energy, 48(1):500-509, ISSN 0360-5442,http://dx.doi.org/10.1016/j.energy.2012.10.009
  288. Haque A.; Lim B. H.; Haseeb A. S. M. A.; Masjuki,H. H.,(2012), Die attach properties of Zn-Al-Mg-Ga based high-temperature lead-free solder on Cu lead-frame. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS Volume: 23, Issue:1, Pages:115-123.
  289. Hasan, M. M., Haseeb, A. S. M. A., Masjuki, H. H. 2012. Structural and mechanical properties of nanostructured tungsten oxide thin films. Surface Engineering, 28(10):778-785.
  290. J.U. Ahamed, N.A. Madlool, R. Saidur, M.I. Shahinuddin, A. Kamyar, H.H. Masjuki,2012. Assessment of energy and exergy efficiencies of a grate clinker cooling system through the optimization of its operational parameters, Energy, 46(1):664-674, ISSN 0360-5442, 10.1016/j.energy.2012.06.074.
  291. J.U. Ahamed, R Saidur, H. H. Masjuki and M.A. Sattar, Energy and thermodynamic performance of LPG as an alternative refrigerant to R-134a in a domestic refrigerator, Energy Education Science and Technology Part A: Energy Science and Research, 2012, 29(1): 597- 610. (ISI-Cited, Q1, IF = 9.33).
  292. Kalam, M.A., Ahamed, J.U., Masjuki, H.H.2012. Land availability of Jatropha production in Malaysia.Renewable and Sustainable Energy Reviews Volume 16, Issue 6, Pages 3999-4007
  293. Kovoor,P. P.,Idris,M. R., Masjuki, H. H.,Yahya, T. F. T., 2012. A study conducted on the impact of effluent waste from machining process on the environment by water analysis. International Journal of Energy and Environmental Engineering,3:21
  294. Liaquat, A.M., Masjuki, H.H., Kalam, M.A., Varman, M., Hazrat, M.A., 2012. Experimental analysis on engine performance and emission characteristics using biodiesel obtained from non-edible oil. International Review of Mechanical Engineering 6(3): 659-665.
  295. Liaquat, A.M., Masjuki, H.H., Kalam, M.A., Varman, M., Hazrat, M.A., Shahabuddin, M., Mofijur, M. 2012. Application of blend fuels in a diesel engine. Energy Procedia Volume 14, 2012, Pages 1124-1133.
  296. M. M. K. Bhuiya, J. U. Ahamed, M. A. R.. Sarkar, B. Salam, R. Saidur, A. S. M. Sayem, M. A. Kalam, Heat transfer and pressure drop characteristics in turbulent flow through a tube, Experimental Heat Transfer, Vol. 25, issue 4, pp. 301-322.
  297. M. Mofijur, H.H.Masjuki, M.A.Kalam, M.A.Hazrat, A.M.Liaquat, M.Shahabuddin, M.Varman. 2012. Prospects of biodiesel from Jatropha in Malaysia. Renewable and Sustainable Energy Reviews 16(2012)5007 5020
  298. M. Shahabuddin, M.A. Kalam, H. H. Masjuki, M. Mofijur. Tribological characteristics of amine phosphate and octylated/butylated diphenylamine additives infused bio-lubricant . Energy education science and technology Part A: Energy Science and Research 2012, 30(1): 89-102
  299. M.A. Hazrat, H.H. Masjuki, M.A. Kalam, I.A. Badruddin, Rahizar Ramli & S.C. Pang, 2012. Steady state analysis of coolant temperature distribution in a spark ignition engine cooling jacket , International Journal of Mechanical and Materials Engineering (IJMME), (ISSN 1823-0334), Vol.7(3:243-250
  300. M.M.K. Bhuiya, J.U. Ahamed, M.S.U. Chowdhury, M.A.R. Sarkar, B. Salam, R. Saidur, H.H. Masjuki, M.A. Kalam,(2012), Heat transfer enhancement and development of correlation for turbulent flow through a tube with triple helical tape inserts.International Communications in Heat and Mass Transfer, Volume 39, Issue 1,Pages 94-101
  301. Md. Hazrat Ali, H. H. Masjuki, M. A. Kalam, Pang S. C., A.M. Liaquat, Irfan Magami, 2012. Determination of Time Variant 1D-3D Temperature and Heat Transfer Distribution Inside The Cooling Jacket of A SI Engine Cooling System After Key-Off, SAE Technical Paper 2012-01-0642, 2012, doi:10.4271/2012-01-0642.
  302. Mofijur, M., Masjuki, H. H., Kalam, M. A., Shahabuddin, M., Hazrat, M. A., Liaquat, A. M. 2012. Palm Oil Methyl Ester and Its Emulsions Effect on Lubricant Performance and Engine Components Wear 
  303. Mofijur, M., Masjuki, H.H., Kalam, M.A., Shahabuddin, M., Hazrat, M.A., Liaquat, A.M. 2012. Palm oil methyl ester and its emulsions effect on lubricant performance and engine components wear. Energy Procedia 14 , pp. 1748-1753
  304. Ong, H.C., Mahlia, T.M.I., Masjuki, H.H., Honnery, D. 2012.Life cycle cost and sensitivity analysis of palm biodiesel production. Fuel 98 , pp. 131-139
  305. Pang S.C., Masjuki H.H., Kalam M.A., Hazrat,M.A. 2012. A Review on Air Flow and Coolant Flow Circuit in Vehicles Cooling System, Int. J. Heat & Mass Trans., 55(24): 6295 6306.
  306. Pang,S.C., Kalam,M.A.,Masjuki, H.H.,Badruddin, I.A. & Hazrat,M.A. 2012. Design Improvements of Engine Cooling System Using CFD And 1D Thermo-Fluid Model: Medium Driving Speed and Keyed-Off Conditions.Engineering e-Transaction (ISSN 1823-6379), 7(2):127-134.
  307. RISMANCHI, B., SAIDUR, R., MASJUKI, H. H. & MAHLIA, T. M. I. 2012. Thermodynamic evaluation of utilizing different ice thermal energy storage systems for cooling application in office buildings in Malaysia. Energy and Buildings, 53:117-126.
  308. Rismanchi, B., Saidur, R., Masjuki, H. H., Mahlia, T. M. I. 2012. Cost-benefit analysis of using cold thermal energy storage systems in building applications 
  309. Rismanchi, B., Saidur, R., Masjuki, H.H., Mahlia, T.M.I.2012.Energetic, economic and environmental benefits of utilizing the ice thermal storage systems for office building applications. Energy and Buildings. 50 (2012) 347 354.
  310. S.C. Pang, M.A. Kalam, H.H. Masjuki, I.A. Badruddin, Rahizar Ramli, M.A. Hazrat, 2012. Underhood Geometry Modification and Transient Coolant Temperature Modelling for Robust Cooling Networks , International Journal of Mechanical and Materials Engineering (IJMME), (ISSN 1823-0334), Vol.7(3):251-258.
  311. SHAHABUDDIN, M., KALAM, M. A., MASJUKI, H. H., BHUIYA, M. M. K. & MOFIJUR, M. 2012. An experimental investigation into biodiesel stability by means of oxidation and property determination. Energy, 44, 616- 622.
  312. Shafie, S. M., Mahlia, T. M. I., Masjuki, H. H., Rismanchi, B. 2012. Life cycle assessment (LCA) of electricity generation from rice husk in Malaysia 
  313. Shafie, S.M., Mahlia, T.M.I., Masjuki, H.H., Ahmad-Yazid, A.(2012)A review on electricity generation based on biomass residue in Malaysia. Renewable and Sustainable Energy Reviews 16 (8) , pp. 5879-5889
  314. Shahabuddin, M., Masjuki, H. H., Kalam, M. A., Mofijur, M., Hazrat, M. A., Liaquat, A. M. 2012. Effect of Additive on Performance of CI Engine Fuelled with Bio Diesel 
  315. Shahabuddin, M., Masjuki, H.H., Kalam, M.A., Mofijur, M., Hazrat, M.A., Liaquat, A.M. 2012. Effect of additive on performance of C.I. engine fuelled with bio diesel. Energy Procedia 14 , pp. 1624-1629
  316. W.B.W. Nik, A.F. Ayob, S. Syahrullail, H.H. Masjuki, & M.F. Ahmad, 2012. THE EFFECT OF BORON FRICTION MODIFIER ON THE PERFORMANCE OF BRAKE PADS. International Journal of Mechanical and Materials Engineering (ISSN 1823-0334),7(1): 31-35.
  317. A.R. Bushroa, H.H. Masjuki, M.R. Muhamad,2011. PARAMETER OPTIMIZATION OF SPUTTERED Ti INTERLAYER USING TAGUCHI METHOD, International Journal of Mechanical and Materials Engineering (ISSN 1823-0334),Volume 6(2).
  318. AHMED, A. S., HAMDAN, S., MASJUKI, H. H. & MAKINO, K. 2010. Efficient Conversion of Xylose and Glucose as Solid Biomass to Bioethanol by Recombinant Yeast. The Journal of the Institute of Engineers, Malaysia, 72, 36-43.
  319. Adnan, R., Masjuki, H. H. & Mahlia, T. M. I. 2011. Mathematical modeling on the effect of equivalence ratio in emission characteristics of compression ignition engine with hydrogen substitution. Applied Mathematics and Computation, 217(13), 6144-6158.
  320. Ahamed J. U., Saidur R. & Masjuki H. H. 2011. A review on exergy analysis of vapor compression refrigeration system, Renewable and Sustainable Energy Reviews, 3(15): 1593-1600.
  321. Ahamed, J. U., Saidur, R., Masjuki, H. H., Mekhilef, S., Ali, M. B., & Furqon, M. H. 2011. An application of energy and exergy analysis in agricultural sector of Malaysia. Energy Policy, 39(12): 7922-7929.
  322. Bushroa, A.R., H.H. Masjuki, M.R. Muhamad, and B.D. Beake,2011. Optimized scratch adhesion for TiSiN coatings deposited by a combination of DC and RF sputtering. Surface & Coatings Technology, 206(7):1837- 1844.
  323. FAZAL, M. A., HASEEB, A. S. M. A. & MASJUKI, H. H. (2011) Effect of different corrosion inhibitors on the corrosion of cast iron in palm biodiesel. Fuel Processing Technology, 92(11), 2154-2159.
  324. Fazal, M. A., Haseeb, A. S. M. A. & Masjuki, H. H. 2011. Biodiesel feasibility study: An evaluation of material compatibility; performance; emission and engine durability. Renewable and Sustainable Energy Reviews, 15, 1314-1324.
  325. Fazal, M.A., A.S.M.A. Haseeb, and H.H. Masjuki, Effect of temperature on the corrosion behavior of mild steel upon exposure to palm biodiesel. Energy, 2011. 36(5): p. 3328-3334.
  326. HUSNAWAN, M., MASJUKI, H. H. & MAHLIA, T. M. I. 2011. The interest of combining two additives with palm olein as selected lubricant components. Industrial Lubrication and Tribology, 63(3), 203-209.
  327. Hasanuzzaman M., Saidur R. & Masjuki, H. H., (2011), Effects of different variables on moisture transfer of household refrigerator-freezer, Energy Education Science and Technology Part A: Energy Science and Research, 27(2): pp. 401-418.
  328. Haseeb, A. S. M. A., Jun, T. S., Fazal, M. A. & Masjuki, H. H. 2011. Degradation of physical properties of different elastomers upon exposure to palm biodiesel. Energy, 36(3), 1814-1819.
  329. Haseeb, A., Fazal, M. A., Jahirul, M. I. & Masjuki, H. H. 2011. Compatibility of automotive materials in biodiesel: A review. Fuel 90(3): 922-931.
  330. Jayed, M. H., Masjuki, H. H., Kalam, M. A., Mahlia, T. M. I., Husnawan, M., & Liaquat, A. M. (2011). Prospects of dedicated biodiesel engine vehicles in Malaysia and Indonesia. Renewable and Sustainable Energy Reviews, 15(1), pp. 220-235.
  331. Kalam, M. A. & Masjuki, H. H. 2011. Design, modifiaction and test of a new catalytic converter for natural gas fueled engines. Arabian journal for science and engineering, 5(36): 677-688.
  332. Kalam, M. A., Masjuki, H. H., Jayed, M. H. & Liaquat, A. M. 2011. Emission and performance characteristics of an indirect ignition diesel engine fuelled with waste cooking oil. Energy, 36, 397-402 (ISI Q1).
  333. Kalam, M.A. and H.H. Masjuki, An experimental investigation of high performance natural gas engine with direct injection. Energy, 2011. 36(5): p. 3563- 3571.
  334. M.A. Kalam, H.H. Masjuki, M. Varman, A.M. Liaquat,2011. FRICTION AND WEAR CHARACTERISTICS OF WASTE VEGETABLE OIL CONTAMINATED LUBRICANTS, International Journal of Mechanical and Materials Engineering (ISSN 1823-0334) Volume 6(3).
  335. M.M. Hasan, A.S.M.A. Haseeb, H.H. Masjuki, (2011) Intermixing of metal oxide/Ag/metal oxide nanoscale multilayers prepared by RF reactive magnetron sputtering, Surface Engineering (Maney Publishing), Vol. 27(5), pp. 382-388.
  336. Mahlia, T. M. I., Saidur, R., Yanti, P. a. A. & Masjuki, H. H., 2011. Role of energy guide labels in consumers purchase decision for household electrical appliances. Energy Education Science and Technology Part a-Energy Science and Research, 27(1), 95-104.
  337. N.W.M. Zulkifli, M.A.Kalam, R. Yunus, H.H. Masjuki,2011. ANTI-WEAR CHARACTERISTICS OF JATROPHA TRIMETHYLOLPROPANE (TMP) ESTER.Engineering e-Transaction (ISSN 1823-6379) Volume 6(2)
  338. Ong, H. C., Mahlia, T. M. I., & Masjuki, H. H. (2011). A review on energy scenario and sustainable energy in Malaysia. Renewable and Sustainable Energy Reviews, 15(1), 639-647.
  339. Ong, H.C., T.M.I. Mahlia, H.H. Masjuki, and R.S. Norhasyima, Comparison of palm oil, Jatropha curcas and Calophyllum inophyllum for biodiesel: A review. Renewable and Sustainable Energy Reviews, 2011. 15(8): p. 3501-3515.
  340. Ong, H.C., T.M.I. Mahlia, and H.H. Masjuki, A review on emissions and mitigation strategies for road transport in Malaysia. Renewable and Sustainable Energy Reviews, 2011. 15(8): p. 3516-3522.
  341. S. Liza, A.S.M.A. Haseeb, A.A. Abbas, H.H. Masjuki. 2011. Failure analysis of retrieved UHMWPE tibial insert in total knee replacement. Engineering Failure Analysis; 18:1415-1423
  342. Shafie, S. M., Mahlia, T. M. I., Masjuki, H. H., & Andriyana, A. 2011. Current energy usage and sustainable energy in Malaysia: A review. Renewable and Sustainable Energy Reviews, 15(9): 4370-4377. (Q1)
  343. Silitonga, A. S., Atabani, A. E., Mahlia, T. M. I., Masjuki, H. H., Badruddin, I. A., & Mekhilef, S. 2011. A review on prospect of Jatropha curcas for biodiesel in Indonesia. Renewable and Sustainable Energy Reviews, 15(8): 3733-3756.
  344. TAJALLY, M., HUDA, Z. & MASJUKI, H. H. 2011. Effect of deformation and recrystallization conditions on tensile behavior of aluminum alloy 7075. Metal Science and Heat Treatment, 53, 165-168.
  345. A. S. M. A. Haseeb, S. Y. Sia, M. A. Fazal, H. H. Masjuki, Effect of Temperature on Tribological Properties of Palm Biodiesel, Energy, 2010. vol.35 (3):1460-1464
  346. A.S. Ahmed, S. Khan, S. Hamdan, R. Rahman, A. Kalam, H.H. Masjuki, T.M.I. Mahlia, 2010. Biodiesel Production from Macro Algae as a Green Fuel for Diesel Engine. Journal of Energy & Environment
  347. A.S.M.A. Haseeb, M.M. Hasan, H.H. Masjuki, (2010). Structural and mechanical properties of nanostructured TiO2 thin films deposited by RF sputtering; Surface and Coatings Technology, 205(2), pp. 338-344.
  348. Aizura, A. B., Mahlia, T. M. I. & Masjuki, H. H. 2010.Potential fuel savings and emissions reduction from fuel economy standards implementation for motor-vehicles. Clean Technologies and Environmental Policy, 12: 255-263.
  349. Fazal, M. A., Haseeb, A. S. M. A., & Masjuki, H. H. (2010). Comparative corrosive characteristics of petroleum diesel and palm biodiesel for automotive materials. Fuel Processing Technology, 91(10), pp.1308-1315
  350. Haseeb, A.S.M.A, Masjuki, H. H., Ann, L. J. & Fazal, M. A. (2010). Corrosion characteristics of copper and leaded bronze in palm biodiesel. Fuel Processing Technology, 91(3):329-334.
  351. Haseeb, A.S.M.A, Masjuki, H. H., Siang, C. T. & Fazal, M. A. 2010. Compatibility of elastomers in palm biodiesel. Renewable Energy, 35(10):2356-2361.
  352. J. U. Ahamed, M. M. K. Bhuiya, R. Saidur, H. H. Masjuki, M. A. R. Sarkar, A. S. M. Sayem and M. Islam (2010), Forced convection heat transfer performance of porous twisted tape insert, Engineering e-Transaction, Vol. 5, No. 2, pp 67-79.
  353. J. U. Ahamed, R. Saidur, H. H. Masjuki (2010), Thermodynamic Performance Analysis Of R-600 And R-600a as Refrigerant, Engineering e-Transaction (ISSN 1823-6379) Vol. 5, No. 1, , pp 11-18.
  354. Jahirul M. I, Saidur R. and Masjuki H. H. Predictability of artificial neural network (ANN) in performance prediction of a retrofitted CNG engine, International Journal of Mechanical and Materials Engineering (IJMME), Vol. 5 (2010), No. 2, pp. 268-275.
  355. Jahirul, M. I., Masjuki, H. H., Saidur, R., Kalam, M. A., Jayed, M. H. & Wazed, M. A.(2010) Comparative engine performance and emission analysis of CNG and gasoline in a retrofitted car engine. Applied Thermal Engineering, 30(14-15), 2219-2226.
  356. M.M. Hasan, A.S.M.A. Haseeb, R. Saidur ,H.H. Masjuki & M. Hamdi. 2010. Influence of Substrate and Annealing Temperatures on Optical Properties of RF-sputtered TiO2 Thin Films. Optical Materials 32(6):690-695.
  357. M.M. Hasan, A.S.M.A. Haseeb, R. Saidur, H.H. Masjuki (2010), Adhision and wear behavior of non-structured titanium oxide thin flims, International Journal of Mechanical and Materials Engineering(IJMME), 5(1), pp. 5-10.
  358. M.M. Hasan, A.S.M.A. Haseeb, R. Saidur, H.H. Masjuki & M. Hamdi. 2010. Influence of Substrate and Annealing Temperature on Optical properties of RF-sputtered TiO2. Optical Materials 32(6):690-695. DOI:10.1016/j.optmat.2009.07.011.
  359. Mahlia, T. M. I., Saidur, R., Husnawan, M., Masjuki, H. H. & Kalam, M. A. (2010). An approach to estimate the life-cycle cost of energy efficiency improvement of room air conditioners. Energy Education Science and Technology Part a-Energy Science and Research, 26(1):1-11.
  360. Memon, L. A., Kalam, M. A., Masjuki, H. H. & Jayed, M. H.2010. Potential Emissions Reduction in Road Transport Sector Using Biofuel in Developing Countries. Atmospheric Environment, 44, 3869-3877.
  361. R. Adnan, H.H. Masjuki and T.M.I. Mahlia (2010), Computational Simulation On Emissions Of Hydrogen Fueled Compression Ignition Engine With Variable Combustion Temperature, International Journal of Mechanical and Materials Engineering (IJMME), Vol.5 No.2, 251-259.
  362. R. Adnan, H.H. Masjuki and T.M.I. Mahlia(2010), EXPERIMENTAL INVESTIGATION ON IN-CYLINDER PRESSURE AND EMISSIONS OF DIESEL ENGINE WITH PORT INJECTION HYDROGEN SYSTEM, International Journal of Mechanical and Materials Engineering (IJMME), Vol.5, No.2, 136-141.
  363. R. Saidur n, J.U. Ahamed, H.H. Masjuki.(2010).Energy, exergy and economic analysis of industrial boilers, Energy Policy, 38(5):2188-2197.
  364. T. M. I. Mahlia, C. G. Hor, H. H. Masjuki, M. Husnawan, M. Varman and S. Mekhilef.(2010). CLOTHES DRYING FROM ROOM AIR CONDITIONING WASTE HEAT: THERMODYNAMICS INVESTIGATION, The Arabian Journal for Science and Engineering, 35(1B):339-351.
  365. Tajally, M., Huda, Z. & Masjuki, H. H. (2010). A comparative analysis of tensile and impact-toughness behavior of cold-worked and annealed 7075 aluminum alloy. International Journal of Impact Engineering, 37(4):425-432.
  366. A. G. Jaharah, I. A. Choudhury,H.H. Masjuki and C. H. Che Hassan, Surface Integrity Of AISI H13 Tool Steel In End Milling Process, International Journal of Mechanical and Materials Engineering, 2009, vol. 4, no.1, pp. 88 -92.
  367. A.B. Aizura, T.M.I. Mahlia, H.H. Masjuki. Potential fuel savings and emissions reduction from fuel economy standards implementation for motor vehicle, Clean Technologies and Environmental Policy, Springer, 2009, pp.1-9.
  368. Hasan, M.M., Haseeb, A.S.M.A., Saidur, R., Masjuki, H.H., Johan, M.R. Structural, optical and morphological properties of TiO2/Ag/ TiO2 multilayer films(2009) AIP Conference Proceedings, 1136, pp. 229- 233.
  369. Hasanuzzaman, M., Saidur, R., Masjuki, H. H. 2009. Effects of operating variables on heat transfer and energy consumption of a household refrigerator-freezer during closed door operation Energy
  370. Husnawan, M; Masjuki, HH; Mahlia, TMI, S. Mekhilef, M.G. Saifullah Use of post flame metal-based and oxygenated additive combination for biodiesel-diesel blends Journal of Scientific & Industrial Research Vol. 68 issue 12, 2009, pp. 1049-1052
  371. Jahirul MI, Saidur R, Masjuki HH, Kalam MA and Rashid MM. Application of artificial neural networks (ANN) for prediction the performance of a dual fuel internal combustion engine. HKIE Transactions. vol 16 No 1, March 2009
  372. M. Hasanuzzaman, R. Saidur and H. H. Masjuki, Effects of operating variables on heat transfer and energy consumption of household refrigerator-freezer during the closed door operation, Energy, Volume 34, Issue 2, February 2009, Pages 196-198
  373. M. Husnawan, H.H. Masjuki, T.M.I. Mahlia, M.G. Saifullah, M.A. Kalam, The use of dihydroxy fatty acid and palm-based polyol as selected componens of envo-diesel fuel blends to reduce C.I engine gaseous emissions and carbon deposits, SAE Paper: 2009-211- 0284
  374. M. Husnawan, H.H. Masjuki, T.M.I. Mahlia, M.G. Saifullah. Thermal analysis of cyclinder head carbon deposits from single cylinder diesel engine fueled by palm oil-diesel fuel emulsions,Oct. 2009, J. of Applied Energy, Elsevier,Vol: 86,Issue:10,pp: 2107-2113.
  375. M. Husnawan, H.H. Masjuki, T.M.I. Mahlia, S. Mekhilef, M.G. Saifullah, Interest of Using Metal-Based Additive and Oxygenated Additive Combination as a Biodiesel- Diesel Blends Post-flame Additive, 2009, JSIR-NISCAIR
  376. M.A. Kalam, H.H. Masjuki, M. Redzuan, T. I. Mahlia, M. A.Fuad, M. Mohibah, K.H. Halim, A.Ishak,M.Khair, A.Shahrir and A.Yusoff, Development and Test of a New Catalytic Converter for Natural Gas Fueled Engine, Int. Journal Sadhana, Indian Academy of Sciences, vol. 34, Part 3, June 2009, pp.1-15.
  377. M.A. Kalam, H.H. Masjuki, T.M.I. Mahlia, A. Ishak and M. Khair, A. Shahrir and A.Yusof, Experimental test of a new compressed natural gas direct injection engine, Journal of Energy and Fuel, ACS, USA, 2009
  378. M.H. Jayed, H.H. Masjuki, R. Saidur, M. A. Kalam & Jahirul, M. I. (2009) ENVIRONMENTAL ASPECTS AND CHALLENGES OF OILSEED PRODUCED BIODIESEL IN SOUTHEAST ASIA. Renewable and Sustainable Energy Reviews,13 (9),pp.2452-2462.
  379. M.M. Hasan, A.S.M.A. Haseeb, R. Saidur , H.H. Masjuki,M. Hamdi, (2009) Synthesis and Annealing of Nanostructured TiO2 Films by Radio-frequency Magnetron Sputtering, Journal of Applied Sciences, vol. 9, Issue 15, pp. 2815-2821, ISSN 1812-5654.
  380. Mahlia, T.M.I., Husnawan, M., Masjuki, H.H., Remuslara, L., Saidur, R., Energy savings potential by substituting driving with walking and cycling for short distance (2009) ASME International Mechanical Engineering Congress and Exposition, Proceedings,7, pp. 3-7.
  381. Mahlia, T.M.I., Husnawan, M., Masjuki, H.H., Chow, K.V., Low, T.S., Liaw, A.W.J., Energy analysis of cooling pump in internal combustion engine (2009) ASME International Mechanical Engineering Congress and Exposition, Proceedings, 8, pp. 249-253.
  382. Saidur R, Hasanuzzaman. M, Hasan M.M. and Masjuki H.H, (2009) Overall Thermal Transfer Value of Residential Buildings in Malaysia, Journal of Applied Sciences, vol. 9, Issue 11, pp. 2130-2136,ISSN1812-5654.
  383. Saidur R, Rahim N.A, Masjuki H.H, Mekhilef S, Ping H.W. and Jamaluddin M.F, End use energy analysis in Malaysia industrial sector, Energy, Volume 34, Issue 2, February 2009, Pages 153-158
  384. Saidur R, Rahim N.A, Ping H.W., M.I. Jahirul, Mekhilef S and Masjuki H.H., Energy and emission analysis for industrial motors in Malaysia, (2009) Energy Policy,37 (9),pp.3650-3658.
  385. Saidur R, Sattar M.A, Masjuki H.H and Jamaluddin M.Y. Greenhouse gas emissions from refrigeration equipment in Malaysia. Energy & Environment, vol. 20, No. 4, 2009, pp 533-551.
  386. Saidur, R., Masjuki, H.H., Hasanuzzaman, M., Performance of an improved solar car ventilator (2009) International Journal of Mechanical and Materials Engineering, 4 (1), pp. 24-34.
  387. Tajally, M., Huda, Z., Masjuki, H. H. 2009. Effect of cold rolling on bending and tensile behavior of 7075 aluminum alloy Journal of Applied Sciences
  388. Tajally, M., Huda, Z., Masjuki, H.H., Effect of cold rolling on bending and tensile behavior of 7075 aluminum alloy (2009) Journal of Applied Sciences, 9 (21), pp. 3888-3893.
  389. H. Abdesselam, H. H. Masjuki, R. Saidur Rahman and M. Guellal, Performance study of water-to-water heat pump using non-Azeotropic refrigerant mixtures R407C, International Energy Journal, 2008, Vol. 9, Issue 4, pp. 267-274.
  390. Kalam, M.A., H H Masjuki, Saifullah, M.G., Seng, T.B. Envo diesel test on automotive engine-an analysis of its performance and emission results. Int. Journal of Mechanical and Materials Engineering, 2008, vol. 3 No. 1, pp. 55-60.
  391. M A Kalam, M G Saifullah, H H Masjuki, M Husnawan and T M I Mahlia, PAH and other emissions from coconut oil blended fuels, Journal of Scientific & Industrial Research, CAIR Publisher, vol. 67 (11), November 2008, p. 1031-1035.
  392. M.A. Kalam and H.H. Masjuki, Potential and properties of palm diesel as alternative fuel for Automotive engines, Int. Energy Journal, RERIC, vol. 9, March 2008, pp. 37-42.
  393. M.A. Kalam, H.H. Masjuki, M. Redzuan, T.M.I. Mahlia, M. A. Fuad, M. Mohibah, Ku. Halim, A. Ishak and M. Khair, A. Shahrir and A.Yusoff, Development and Test of a New Catalytic Converter for Natural Gas Fueled Engine, SAE paper no. 2008-01-1550, USA.
  394. M.J. Ghazali, W.M. Rainforth, S. Abdullah, A.K.A. Ihsan and Masjuki Hassan, Subsurface deformation of worn Al-Cu and Al-Mg Alloys, Advanced Materials Research, vols. 33-34, 2008, pp. 483- 488.
  395. R. Saidur and H H Masjuki, Application of Artificial Neural Networks to Investigate the Energy Performance of Household Refrigerator-freezers, Journal of Applied Sciences, 8 (11), 2008, pp. 2124-2129
  396. R. Saidur, M. M. Hasan, A.S.M.A. Haseeb, H. H. Masjuki, Energy-efficient optical coating for flat glass, Journal of Applied Sciences,2008,Vol. 8, No. 10, pp. 1883-1890.
  397. R. Saidur, M.I. Jahirul, M. Hasanuzzaman and H.H. Masjuki, Analysis of exhaust emission of natural gas engine by using response surface methodology, Journal of Applied Science, 8(19), 2008, pp. 3328-3339.
  398. Saidur R, Masjuki H.H, C.Y. Tan, J.K. Ooi, P.H. Yoon, Performance investigation of a solar powered thermoelectric refrigerator, International Journal of Mechanical and Materials Engineering, Vol. 3, Issue 1, 2008, pp. 7-16.
  399. Saidur R, and H H Masjuki, energy and associated emission analysis in office building, International Journal of Mechanical and Materials Engineering, vol. 3, Issue 1, 2008, pp. 90- 96.
  400. B.N. Taufiq, H.H. Masjuki, T.M.I. Mahlia, M.S. Faizul, R. Saidur, E. Niza Mohamad, Second law analysis for optimal thermal design of radial fin geometry by convection, Int. Journal of Applied Thermal Engineering, Elsevier Ltd., UK, vol. 27, 2007, pp. 1363-1370.
  401. M. Husnawan, M.G. Saifullah and H.H. Masjuki, Development of friction force model for mineral oil basestock containing palm olein and antiwear additive, Journal of Tribology International, vol. 40, Issue 1, January 2007, pp. 74-81.
  402. Mahlia, T. M. I., Taufiq, B. N., Ismail, Masjuki, H. H. 2007. Correlation between thermal conductivity and the thickness of selected insulation materials for building wall Energy and Buildings
  403. Mahlia, T.M.I., B.N. Taufiq, Ismail, H H Masjuki, Correlation between thermal conductivity and the thickness of selected insulation materials for building wall, Int. Journal of Energy and Building, Elsevier Science UK vol. 39, Issue 2, February 2007, pp. 182-187.
  404. Saidur R, H H Masjuki and Jamaluddin M.Y, An application of energy and exergy analysis in residential sector of Malaysia, Int. Journal of Energy Policy, Elsevier Science UK, vol. 35, Issue 2, February 2007, pp. 1050-1063.
  405. Saidur R, Hasanuzzaman M., Sattar MA and Masjuki H.H, Open and Closed Door Moisture Transport and Corresponding Energy Consumption in Household Refrigerator, Journal of Energy and Environment,2007, Vol. 6, pp. 18-27.
  406. Saidur R, Sattar MA, H H Masjuki, Abdesselam H and BS Shahruan, Energy and exergy analysis at the utility and commercial sectors of Malaysia, Energy Policy, vol.35, Issue 3, March 2007, pp.1956-1966.
  407. Saidur R, Sattar MA, Masjuki H.H, Ahmed S and U. Hashim, An estimation of the energy and exergy efficiencies for the energy resources consumption in the transportation sector in Malaysia, Int. Journal of Energy Policy, Elsevier Science UK, vol. 35, issue 8, August 2007, pp. 4018-4026.
  408. Wan Nik, W. B., Maleque, M. A., Ani, F. N., & Masjuki, H. H. (2007). Experimental investigation on system performance using palm oil as hydraulic fluid. Industrial Lubrication and Tribology, 59(5), 200-208.
  409. Aslam, M. U., Masjuki, H. H., Kalam, M. A., Abdesselam, H., Mahlia, T. M. I., Amalina, M. A. 2006. An experimental investigation of CNG as an alternative fuel for a retrofitted gasoline vehicle Fuel
  410. Aslam, M. U., Masjuki, H. H., Kalam, M. A., Abdesselam, H., Mahlia, T. M. I., Amalina, M. A. 2006. An experimental investigation of CNG as an alternative fuel for a retrofitted gasoline vehicle Fuel
  411. H. Abdessalam, H H Masjuki, M. Guellal and S. Rahman, Performance evaluation of environmental friendly refrigerant for high temperature heat pumps, AMSE Best of Book 2006, pp. 16-25
  412. M.U. Aslam, H.H. Masjuki, M.A. Kalam, H. Abdesselam, T.M.I. Mahlia and M.A. Amalina, An Experimental Investigation of CNG as an Alternative Fuel for a Retrofitted Gasoline Vehicle, FUEL (Int. Journal), Elsevier Science U.K, vol. 85, Issues 5-6, March 2006, pp. 717-724.
  413. Saidur, R., Khaliq, A. H. A., Masjuki, H. H. 2006. Analysis of energy and exergy use for process heating in the industrial sector of Malaysia International Journal of Exergy
  414. Saidur, R., Masjuki, H. H., Jamaluddin, M. Y. 2006. A new approach to investigate the energy performance of a household refrigerator-freezer International Energy Journal
  415. Saidur, R., Masjuki, H. H., Jamaluddin, M. Y., Yap, F. C. 2006. Actual usage conditions, energy savings and associated emission reductions of washing machines Transactions Hong Kong Institution of Engineers
  416. Varman, M., Mahlia, T. M. I., Masjuki, H. H. 2006. Method for calculating annual energy efficiency improvement of TV sets Energy Policy
  417. Varman, M., Mahlia, T. M. I., Masjuki, H. H. 2006. Method for calculating annual energy efficiency improvement of TV sets Energy Policy
  418. Varman, M; Mahlia, TM; H H Masjuki, Method for calculating annual energy efficiency improvement of TV sets, Int. Journal of Energy Policy, Elsevier Science UK, 2006, vol. 34, no. 15, pp. 2429-2432
  419. Hendra, R., Hamdani, Mahlia, T. M. I., Masjuki, H. H. 2005. Thermal and melting heat transfer characteristics in a latent heat storage system using Mikro Applied Thermal Engineering
  420. Hendra, R., Hamdani, Mahlia, T. M. I., Masjuki, H. H. 2005. Thermal and melting heat transfer characteristics in a latent heat storage system using mikro Applied Thermal Engineering
  421. Kalam, M. A., Masjuki, H. H. 2005. Effect of coconut oil-blended fuels on diesel engine wear and lubrication Lubrication Science
  422. Kalam, M. A., Masjuki, H. H. 2005. Recent developments on biodiesel in Malaysia Journal of Scientific Industrial Research
  423. Kalam, M. A., Masjuki, H. H. 2005. Recent developments on biodiesel in Malaysia Journal of Scientific and Industrial Research
  424. Kalam, Md Abul, Masjuki Hj Hassan, Abdesselam Hamlaoui, Amalina Bte Muhammad Afifi, TM Indra Mahlia, and Md Aslam Uddin. "Development of Co- Relation Between Vehicle and Stationary Dynamometer- Engine Emissions." In ASME 2005 Internal Combustion Engine Division Spring Technical Conference, pp. 101-106. American Society of Mechanical Engineers, 2005.
  425. Kalam, Md Abul, Masjuki Hj Hassan, and Edzrol Niza Mohamad. "Wear and Lubrication Characteristics of a Multi-Cylinder Diesel Engine Using Vegetable Oil Blended Fuel." In World Tribology Congress III, pp. 553-558. American Society of Mechanical Engineers, 2005.
  426. M. A. Kalam, H. H. Masjuki, Recent developments on biodiesel in Malaysia, Journal of Scientific & Industrial Research, India, vol. 64, no. 11, Nov. 2005, pp. 920-927.
  427. M.A. Kalam, H.H. Masjuki, Effect of coconut oil blended fuels on diesel engines wear and lubrication, Journal of Lubrication Science, vol. 17-4, Leaf Coppin France, August 2005, pp.389-402.
  428. Mahlia, T. M. I., Masjuki, H. H., Taha, F. M., Rahim, N. A., Saidur, R. 2005. Energy labeling for electric fans in Malaysia Energy Policy
  429. Mahlia, T. M. I., Masjuki, H. H., Taha, F. M., Rahim, N. A., Saidur, R. 2005. Energy labeling for electric fans in Malaysia Energy Policy
  430. Mahlia, T. M. I., Said, M. F. M., Masjuki, H. H., Tamjis, M. R. 2005. Cost-benefit analysis and emission reduction of lighting retrofits in residential sector Energy and Buildings
  431. Mahlia, T. M. I., Said, M. F. M., Masjuki, H. H., Tamjis, M. R. 2005. Cost-benefit analysis and emission reduction of lighting retrofits in residential sector Energy and Buildings
  432. Nik, W. B. W., Ani, F. N., Masjuki, H. H. 2005. Thermal stability evaluation of palm oil as energy transport media Energy Conversion and Management
  433. Nik, W. B. W., Ani, F. N., Masjuki, H. H., Giap, S. G. E. 2005. Rheology of bio-edible oils according to several rheological models and its potential as hydraulic fluid Industrial Crops and Products
  434. Rahman, Saidur, Nizam Mohd Sidik, Masjuki HJ Hassan, Tamjis Mohd Rom, and Iswadi Jauhari. "Temperature performance and usage conditions of domestic refrigerator-freezers in Malaysia." HKIE Transactions 12, no. 2 (2005): 30-35.
  435. Saidur, R., Masjuki, H. H., Mahlia, T. M. I. 2005. Labeling design effort for household refrigerator-freezers in Malaysia Energy Policy
  436. Saidur, R., Masjuki, H. H., Mahlia, T. M. I. 2005. Labeling design effort for household refrigerator-freezers in Malaysia Energy Policy
  437. Varman, M., Masjuki, H. H., Mahlia, T. M. I. 2005. Electricity savings from implementation of minimum energy efficiency standard for TVs in Malaysia Energy and Buildings
  438. Varman, M., Masjuki, H. H., Mahlia, T. M. I. 2005. Electricity savings from implementation of minimum energy efficiency standard for TVs in Malaysia Energy and Buildings
  439. Wan Nik, W. B., Ani, F. N., Masjuki, H. H. 2005. Thermal stability evaluation of palm oil as energy transport media Energy Conversion and Management
  440. Wan Nik, W. B., Ani, F. N., Masjuki, H. H., Eng Giap, S. G. 2005. Rheology of bio-edible oils according to several rheological models and its potential as hydraulic fluid Industrial Crops and Products
  441. Ghani, J. A., Choudhury, I. A., Masjuki, H. H. 2004. Performance of P10 TiN coated carbide tools when end milling AISI H13 tool steel at high cutting speed Journal of Materials Processing Technology
  442. Ghani, J. A., Choudhury, I. A., Masjuki, H. H. 2004. Performance of P10TiN coated carbide tools when end milling AISI H13 tool steel at high cutting speed Journal of Materials Processing Technology
  443. Ghani, J. A., Choudhury, I. A., Masjuki, H. H. 2004. Wear mechanism of TiN coated carbide and uncoated cermets tools at high cutting speed applications Journal of Materials Processing Technology
  444. Ghani, J. A., Choudhury, I. A., Masjuki, H. H. 2004. Wear mechanism of TiN coated carbide and uncoated cermets tools at high cutting speed applications Journal of Materials Processing Technology
  445. J.A. Ghani, I.A. Choudhury and H.H. Masjuki, Application of Taguchi method in the optimization of end milling parameters, Journal of Materials Processing Technology, Elsevier, 2004, No. 145, pp. 84-92.
  446. Kalam, M. A., Masjuki, H. H. 2004. Emissions and deposit characteristics of a small diesel engine when operated on preheated crude palm oil Biomass Bioenergy
  447. Kalam, M. A., Masjuki, H. H. 2004. Emissions and deposit characteristics of a small diesel engine when operated on preheated crude palm oil Biomass and Bioenergy
  448. M.A. Kalam and H.H. Masjuki, Emissions and deposit characteristics of a small diesel engine when operated on preheated crude palm oil, Int. Journal of Biomass and Bioenergy, Elsevier U.K., Sept. 2004, vol. 27, no. 3, pp. 289-297
  449. Mahlia, T. M. I., Masjuki, H. H., Saidur, R., Amalina, M. A. 2004. Cost-benefit analysis of implementing minimum energy efficiency standards for household refrigerator-freezers in Malaysia Energy Policy
  450. Mahlia, T. M. I., Masjuki, H. H., Saidur, R., Amalina, M. A. 2004. Cost-benefit analysis of implementing minimum energy efficiency standards for household refrigerator-freezers in Malaysia Energy Policy
  451. Mahlia, T. M. I., Masjuki, H. H., Saidur, R., Amalina, M. A. 2004. Mitigation of emissions through energy efficiency standards for room air conditioners in Malaysia Energy Policy
  452. Mahlia, T. M. I., Masjuki, H. H., Saidur, R., Amalina, M. A. 2004. Mitigation of emissions through energy efficiency standards for room air conditioners in Malaysia Energy Policy
  453. Maleque, M. A., Poon, Y. M., Masjuki, H. H. 2004. The effect of intercritical heat treatment on the mechanical properties of AISI 3115 steel Journal of Materials Processing Technology
  454. Maleque, M. A., Poon, Y., Masjuki, H. H. 2004. The effect of intercritical heat treatment on the mechanical properties of AISI 3115 steel Journal of Materials Processing Technology
  455. Saidur, R., Nasrudin, A. R., Masjuki, H. H., Choudhury, I. A., Mahlia, T. M. I., Husnawan, M. 2004. Development of energy test procedure for household refrigerator-freezers in Malaysia International Journal of Power and Energy Systems
  456. Husnawan M., Masjuki H.H., M.D. Irfan, Exhaust emission evaluation of a single cylinder diesel engine fueled by crude palm oil (CPO) water emulsions , SAE Paper 2003-01-1931/JSAE 20030030, SAE Int., USA 2003, pp.1-5
  457. Kalam, M. A., Masjuki, H. H. 2003. Effect of palm oil methyl ester and its emulsions on lubricant degradation and engine component wear Lubrication Science
  458. Kalam, M. A., Husnawan, M., Masjuki, H. H. 2003. Exhaust emission and combustion evaluation of coconut oil-powered indirect injection diesel engine Renewable Energy
  459. Kalam, M. A., Husnawan, M., Masjuki, H. H. 2003. Exhaust emission and combustion evaluation of coconut oil-powered indirect injection diesel engine Renewable Energy
  460. Kalam, M.A., M. Husnawan and H.H. Masjuki, Exhaust emission and combustion evaluation of coconut oil powered indirect injection diesel engine, Int. Journal Renewable Energy, Paragon Press UK, 2003, vol. 28, no. 15, pp. 2405-2415.
  461. Mahlia, T. M. I., Masjuki, H. H., Saidur, R., Choudhury, I. A., NoorLeha, A. R. 2003. Projected electricity savings from implementing minimum energy efficiency standard for household refrigerators in Malaysia Energy
  462. Mahlia, T. M. I., Masjuki, H. H., Saidur, R., Choudhury, I. A., NoorLeha, A. R. 2003. Projected electricity savings from implementing minimum energy efficiency standard for household refrigerators in Malaysia Energy
  463. Maleque, M. A., Masjuki, H. H., Sapuan, S. M. 2003. Vegetable-based biodegradable lubricating oil additives Industrial Lubrication and Tribology
  464. Maleque, M. A., Masjuki, H. H., Sapuan, S. M. 2003. Vegetable-based biodegradable lubricating oil additives Industrial Lubrication and Tribology
  465. T.M.I. Mahlia, H.H. Masjuki, I.A. Choudhury, Saidur. R and Noor Leha, Projected electricity savings from implementing minimum energy efficiency standard for household refrigerators in Malaysia, Energy Journal, Elsevier Science Ltd, U.K., 2003, vol. 28, no. 7, pp. 751-754
  466. Kalam, M. A., Masjuki, H. H. 2002. Biodiesel from palmoil - An analysis of its properties and potential Biomass and Bioenergy
  467. Kalam, M. A., Masjuki, H. H. 2002. Biodiesel from palmoil - an analysis of its properties and potential Biomass Bioenergy
  468. Kalam, M. A., & Majsuki, H. H. (2002). Use of an additive in biofuel to evaluate emissions, engine component wear and lubrication characteristics. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216(9), 751-757.
  469. M.A. Kalam and H.H. Masjuki, Biodiesel from palmoil-an analysis of its properties and potential, Int. Journal of Biomass & Bioenergy, Pergamon UK, 2002, Vol. 23, No.6, pp. 471-479.
  470. Mahlia, T. M. I., Masjuki, H. H., Choudhury, I. A. 2002. Development of energy labels for room air conditioner in Malaysia: Methodology and results Energy Conversion and Management
  471. Mahlia, T. M. I., Masjuki, H. H., Choudhury, I. A. 2002. Development of energy labels for room air conditioner in Malaysia: methodology and results Energy Conversion and Management
  472. Mahlia, T. M. I., Masjuki, H. H., Choudhury, I. A. 2002. Potential electricity savings by implementing energy labels for room air conditioner in Malaysia Energy Conversion and Management
  473. Mahlia, T. M. I., Masjuki, H. H., Choudhury, I. A. 2002. Potential electricity savings by implementing energy labels for room air conditioner in Malaysia Energy Conversion and Management
  474. Mahlia, T. M. I., Masjuki, H. H., Choudhury, I. A. 2002. Theory of energy efficiency standards and labels Energy Conversion and Management
  475. Mahlia, T. M. I., Masjuki, H. H., Choudhury, I. A. 2002. Theory of energy efficiency standards and labels Energy Conversion and Management
  476. Mahlia, T. M. I., Masjuki, H. H., Choudhury, I. A., Ghazali, N. N. N. 2002. Economical and environmental impact of room air conditioners energy labels in Malaysia Energy Conversion and Management
  477. Mahlia, T. M. I., Masjuki, H. H., Choudhury, I. A., Ghazali, N. N. N. 2002. Economical and environmental impact of room air conditioners energy labels in Malaysia Energy Conversion and Management
  478. Mahlia, T. M. I., Masjuki, H. H., Choudhury, I. A., Saidur, R. 2002. Testing and rating non-ducted air conditioners in Malaysia: The applicability of ISO standard 5151 International Journal of Power and Energy Systems
  479. Maleque, M. A., Masjuki, H. H. 2002. Wear surface characteristics study of tribo-materials under palm oil methyl ester added lubricant Industrial Lubrication and Tribology
  480. Maleque, M. A., Masjuki, H. H. 2002. Wear surface characteristics study of tribo-materials under palm oil methyl ester added lubricant Industrial Lubrication and Tribology
  481. Masjuki, H. H., Mahlia, T. M. I., Choudhury, I. A., Saidur, R. 2002. Potential CO2 reduction by fuel substitution to generate electricity in Malaysia Energy Conversion and Management
  482. Masjuki, H. H., Mahlia, T. M. I., Choudhury, I. A., Saidur, R. 2002. Potential CO2 reduction by fuel substitution to generate electricity in Malaysia Energy Conversion and Management
  483. Saidur, R., Masjuki, H. H., Choudhury, I. A. 2002. Role of ambient temperature, door opening, thermostat setting position and their combined effect on refrigerator-freezer energy consumption Energy Conversion and Management
  484. Saidur, R., Masjuki, H. H., Choudhury, I. A. 2002. Role of ambient temperature, door opening, thermostat setting position and their combined effect on refrigerator-freezer energy consumption Energy Conversion and Management
  485. T.M.I. Mahlia, H.H. Masjuki, and I.A. Choudhury, A theory on energy efficiency standard and label, Energy Conservation and Management an Int. Journal, Elsevier Science Ltd, U.K., 2002, Vol.43 (6), pp.743-761
  486. Mahlia, T. M. I., Masjuki, H. H., Choudhury, I. A., Saidur, R. 2001. Potential CO2 reduction by implementing energy efficiency standard for room air conditioner in Malaysia Energy Conversion and Management
  487. Mahlia, T. M. I., Masjuki, H. H., Choudhury, I. A., Saidur, R. 2001. Potential CO2 reduction by implementing energy efficiency standard for room air conditioner in Malaysia Energy Conversion and Management
  488. Masjuki, H. H., Kalam, M. A., Maleque, M. A., Kubo, A., Nonaka, T. 2001. Performance, emissions and wear characteristics of an indirect injection diesel engine using coconut oil blended fuel Proceedings of the Institution of Mechanical Engineers Part D-Journal of Automobile Engineering
  489. Masjuki, H. H., Kalam, M. A., Maleque, M. A., Kubo, A., Nonaka, T. 2001. Performance, emissions and wear characteristics of an indirect injection diesel engine using coconut oil blended fuel Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
  490. Masjuki, H. H., Mahlia, T. M. I., Choudhury, I. A. 2001. Potential electricity savings by implementing minimum energy efficiency standards for room air conditioners in Malaysia Energy Conversion and Management
  491. Masjuki, H. H., Mahlia, T. M. I., Choudhury, I. A. 2001. Potential electricity savings by implementing minimum energy efficiency standards for room air conditioners in Malaysia Energy Conversion and Management
  492. Masjuki, H. H., Saidur, R., Choudhury, I. A., Mahlia, T. M. I., Ghani, A. K., Maleque, M. A. 2001. The applicability of ISO household refrigerator-freezer energy test specifications in Malaysia Energy
  493. Masjuki, H. H., Saidur, R., Choudhury, I. A., Mahlia, T. M. I., Ghani, A. K., Maleque, M. A. 2001. The applicability of ISO household refrigerator-freezer energy test specifications in Malaysia Energy
  494. Maleque, M. A., Masjuki, H. H., Haseeb, A. 2000. Effect of mechanical factors on tribological properties of palm oil methyl ester blended lubricant Wear
  495. Masjuki, H. H., Maleque, M. A., Kubo, A., Nonaka, T. 1999. Palm oil and mineral oil based lubricants - their tribological and emission performance Tribology International
  496. Maleque, M. A., Masjuki, H. H., Ishak, M. 1998. Bio-fuel-contaminated lubricant and hardening effects on the friction and wear of AISI 1045 steel Tribology Transactions
  497. Masjuki, H. H., Maleque, M. A. 1997. Investigation of the anti-wear characteristics of palm oil methyl ester using a four-ball tribometer test Wear
  498. Masjuki, H., Abdulmuin, M. Z., Sii, H. S. 1997. Indirect injection diesel engine operation on palm oil methyl esters and its emulsions Proceedings of the Institution of Mechanical Engineers Part D-Journal of Automobile Engineering
  499. Masjuki, H. H., Maleque, M. A. 1996. The effect of palm oil diesel fuel contaminated lubricant on sliding wear of cast irons against mild steel Wear
  500. Masjuki, H., Abdulmuin, M. Z., Sii, H. S. 1996. Investigations on preheated palm oil methyl esters in the diesel engine Proceedings of the Institution of Mechanical Engineers Part a-Journal of Power and Energy
  501. Masjuki, H. H., Sapuan, S. M. 1995. PALM OIL METHYL-ESTERS AS LUBRICANT ADDITIVE IN A SMALL DIESEL-ENGINE Journal of the American Oil Chemists Society
  502. Sii, H. S., Masjuki, H., Zaki, A. M. 1995. DYNAMOMETER EVALUATION AND ENGINE WEAR CHARACTERISTICS OF PALM OIL DIESEL EMULSIONS Journal of the American Oil Chemists Society
  503. Masjuki, H., Zaki, A. M., Sapuan, S. M. 1993. A RAPID TEST TO MEASURE PERFORMANCE, EMISSION AND WEAR OF A DIESEL-ENGINE FUELED WITH PALM OIL DIESEL Journal of the American Oil Chemists Society
Books
  1. Masjuki, H. (2015). Handbook of Plain Bearings: Buku Panduan Galas Datar: Penerbit Universiti Malaya.
  2. Masjuki H.H. 2010. Biofuel Engine: A New Challenge. International & Corporate relations Office (ICR). University of Malaya, Kuala Lumpur, Malaysia. ISBN (978-967-5148-65-1), pp.1-56.
  3. M. A. Kalam, H. H. Masjuki, H. Ramang, M.Syazly, M. Redzuan and T.M.I Mahlia, Palm Oil Diesel Production and Its Experimental Test on a Diesel Engine, Book chapter by The Haworth Press, Inc. Binghamton, NY 13904-1580 USA, www.haworthpressinc.com. (Oct./November), 2007.
  4. Kalam, M.A., H.H. Masjuki, M.A. Maleque, M.A. Amalina, H. Abdesselam and T.M.I. Mahlia, in General Emissions 2004, SP-1863, Air-Fuel ratio calculation for a natural gas fuelled spark ignition engine SAE International, ISBN:0-7680-1399 - 2/SAE2004-01-0640, pp.183-190
Chapter in Books
  1. M. Mofijur, M.G. Rasul, N.M.S. Hassan, H.H. Masjuki, M.A. Kalam, H.M. Mahmudul, 2016. "Assessment of Physical, Chemical, and Tribological Properties of Different Biodiesel Fuels". Ch: 14, pp. 441-461.CLEAN ENERGY FOR SUSTAINABLE DEVELOPMENT 1st Edition, Elsevier, ISBN 978-0-12-805423-9, eBook ISBN: 9780128054246
  2. M. Shahabuddin, H.H. Masjuki and M.A. Kalam, 2013. Development of Eco-Friendly Biodegradable Biolubricant Based on Jatropha Oil,Ch: 8, pp. 1-12.Tribology in Engineering, Ed. Ha im Pihtili,InTech, ISBN 978-953-51- 1126-9
  3. RISMANCHI, B., SAIDUR, R., MASJUKI, H. H. & MAHLIA, T. M. I. 2012. Cost-benefit analysis of using cold thermal energy storage systems in building applications. In: ZENG, D. (ed.), Energy Procedia:493- 498, 2011 2nd International Conference on Advances in Energy Engineering.
  4. SHAFIE, S. M., MAHLIA, T. M. I., MASJUKI, H. H. & RISMANCHI, B. 2012. Life cycle assessment (LCA) of electricity generation from rice husk in Malaysia. In: ZENG, D. (ed.), Energy Procedia, 14:499-504, 2011 2nd International Conference on Advances in Energy Engineering.
  5. Kalam, M.A. and Masjuki, H.H. 2011. Experimental Test of a Diesel Engine using Envo-Diesel as an Alternative Fuel, New Trends and Developments in Automotive System Engineering, ISBN 978-953-307-517-4, published by INTECH
  6. M. A. Kalam, H. H. Masjuki, H. Ramang, M.Syazly, M. Redzuan and T.M.I Mahlia, 2008,Palm Oil Diesel Production and Its Experimental Test on a Diesel Engine, Handbook of Plant-Based Biofuels, Ed. Ashok Pandey, CRC Press (Taylor & Francis) New York, pp. 225-240
Article in Proceeding
  1. Ibrahim, T. M., Syahir, A. Z., Zulkifli, N. W. M., Masjuki, H. H., & Osman, A. (2017). Enhancing vehicle s engine warm up using integrated mechanical approach. IOP Conference Series: Materials Science and Engineering, 210(1), 012064.
  2. Imdadul H. K, Masjuki H. H, Kalam M. A, Zulkifli N. W. M, Varman M, Rashed M. M (2016). Effect of long chain alcohol additives on fuel properties and exhaust emission of biodiesel blends in a diesel engine. 2nd International sustainable technology, energy & civilization conference (ISTECC), The University Kebangsaan Malaysia.
  3. Monirul, I. M., Masjuki, H. H., Kalam, M. A., Zulkifl, N. W. M., Varman, M. (2016) Effect of Biodiesel-Diesel-Ethanol Ternary Blend on Cold Flow Properties and Particulate Matter of Diesel Engine Exhaust emission. International sustainable technology, energy & civilization conference (ISTECC 2016), The University Kebangsaan Malaysia
  4. Mosarof, M.H., Kalam, K.A., Masjuki, H.H., Arslan, A., Ashraful, A.M., Monirul, I.M. Evaluation of lubricating performance of biodegradable Moringa oleifera oil. TECHON 2016, Kuching Sarawak, Malaysia
  5. Ruhul, A. M., Masjuki, H. H., Kalam, M. A., Shahir, S. A., Reham, S. S., & Shancita, I. (2016). Biodiesel production, properties and emissions test characteristics of non-edible fuels in Diesel engine. Journal of Scientific Research and Development 3 (1): 101-106.
  6. H.G. How, H.H. Masjuki, M.A. Kalam and Y.H. Teoh. Evaluation of Performance, Combustion, Regulated and Particulate Matter Emissions of a Common-Rail DI Engine Fuelled with Moringa Oleifera Biodiesel. 3rd International Conference on Recent Advances in Automotive Engineering & Mobility Research (ReCAR 2015), 1-3 December 2015, Holiday Inn, Melaka, Malaysia.
  7. M. I. A. Bakar, M. N. A. Yusoff, H. H. Masjuki and N. W. M. Zulkifli. The Effects of Palm Waste Bio-Based As Fuel Additive on SI Engine Performance. 3rd International Conference on Recent Advances in Automotive Engineering & Mobility Research (ReCAR 2015), 1-3 December 2015, Holiday Inn, Melaka, Malaysia.
  8. Rashedul, H. K., Masjuki, H. H., Kalam, M. A., & Ashraful, A. M. (2017). Performance and Emission of a CI Engine Using Antioxidant Treated Biodiesel. Journal of Clean Energy Technologies, 5(1).
  9. Ruhul, A. M., Kalam, M. A., Masjuki, Imtenan, S., Sanjid, A., Teoh, Y.T., How, H.G. (2015). Combustion and emission investigation of Calophyllum inophyllum biodiesel blends in an unmodified diesel engine. Proceeding of Australian Combustion Symposium, 220-223
  10. Shancita, I., Masjuki, H. H., & Kalam, M. A. (2017). Particulate Matter Emission Characteristics of a Biodiesel Fueled Engine at Idling Speed. Journal of Clean Energy Technologies, 5(1).
  11. Teoh, Y. H., Masjuki, H. H., Kalam, M. A., How, H. G., Ashrafur Rahman, S. M., Ruhul, A. M (2015). Effect of Injection Timing on Gasoline/Diesel and Gasoline/ Biodiesel Fuelled Dual-Fuel Engine: A Comparative Study. Proceeding of Australian Combustion Symposium, 216-219
  12. Y.H. Teoh, H.H. Masjuki, M.A. Kalam and H.G. How. Development of Electronically Controlled Common- Rail Fuel Injection System and Its Application Strategy in Single-Cylinder Diesel Engine. 3rd International Conference on Recent Advances in Automotive Engineering & Mobility Research (ReCAR 2015), 1-3 December 2015, Holiday Inn, Melaka, Malaysia.
  13. N.W.M. Zulkifli, H.H. Masjuki, M.A. Kalam, S.S.N. Azman, Lubricity of bio-based lubricant derived from different chemically modified fatty acid methyl ester, in: 41st LEEDS-LYON SYMPOSIUM on TRIBOLOGY, Leeds Trinity University, 2014.
  14. Alam T, Al Mahmud KHA, Hasan MF, Shahir SA, Masjuki HH, Kalam MA, Imran A, Mobarak HM. Effect of Magnesia on Zinc Oxide Stabilized Nano Alumina Ceramic Powder in Sintering Process and Its Impact on Mechanical Properties. The Malaysian International Tribology Conference 2013 (MITC2013), 18-20 November 2013, Kota Kinabalu, Sabah, Malaysia.
  15. Arbab MI, Masjuki HH; Varman M, Kalam MA, Imtenan S, Sajjad H. Experimental Investigation of Optimum Blend Ratio of Jatropha, Palm and Coconut Based Biodiesel to Improve Fuel Properties, Engine Performance and Emission Characteristics. SAE/KSAE 2013 International Powertrains, Fuels & Lubricants Meeting, 21-23 October 2013, Seuol, Korea.
  16. How HG, Masjuki HH, Kalam MA, Teoh YH, Abdullah MA. Effect of injection timing on performance, emission and combustion characteristics of a common-rail diesel engine fuelled with coconut oil methyl ester. SAE/KSAE 2013 International Powertrains, Fuels & Lubricants Meeting, 21-23 October 2013, Seuol, Korea.
  17. Imran A, Masjuki HH, Kalam MA, Varman M, Hasmelidin M, Almahmud KAH, Shahir SA, Habibullah M. Study of friction and wear characteristic of Jatropha oil blended lube oil. The Malaysian International Tribology Conference 2013 (MITC2013), 18-20 November 2013, Kota Kinabalu, Sabah, Malaysia.
  18. Masjuki HH, Kalam MA, Mofijur M, Shahabuddin M. Biofuel: policy, standardization and recommendation for sustainable future energy supply. The Mediterranean Green Energy Forum (MGEF-13), 16-20 June 2013, Fes, Morocco.
  19. Masjuki HH, Kalam MA, Varman M, Ashrafur Rahman SM, Rizwanul Fattah IM, Mofijur M. Biofuel: Prospects and challenges as cleaner energy source. The 6th AUN/SEED-Net Regional Conference On Energy Engineering (RCEneE), 6-7 September 2013, Institut Teknologi Bandung, Indonesia.
  20. Masum BM, Kalam MA, Masjuki HH, Palash SM. Study on the effect of adiabatic flame temperature on NOx formation using ethanol gasoline blend in SI engine. The 2013 International Forum on Mechanical and Material Engineering (IFMME 2013), 13-14 June, 2013, Guangzhou, China.
  21. Rizwanul Fattah IM, Masjuki HH, Kalam MA, Varman M. Effect of antioxidant added coconut biodiesel blends on emission characteristics of a heavy-duty diesel engine. The 2013 International Conference on Frontiers of Environment, Energy and Bioscience (ICFEEB 2013), 24-25 October 2013, Beijing, China
  22. Teoh YH, Masjuki HH, Kalam MA, Amalina MA, How HG. Impact of waste cooking oil biodiesel on performance, exhaust emission and combustion characteristics in a light-duty diesel engine. SAE/KSAE 2013 International Powertrains, Fuels & Lubricants Meeting, 21-23 October 2013, Seuol, Korea.
  23. Liaquat AM, Masjuki HH, Kalam MA, Bhuiya MMK, Varman M. Influence of coconut biodiesel and waste cooking oil blended fuels on engine performance and emission characteristics. Proceedings of the 2012 Fall Conference of the ASME Internal Combustion Engine Division (ICEF2012), 23-26 September 2012, Vancouver, BC, Canada.
  24. Liaquat AM, Masjuki HH, Kalam MA, Rizwanul Fattah IM, Hazrat MA, Varman M, Mofijur M, Shahabuddin M. Effect of coconut biodiesel blended fuels on engine performance and emission characteristics. 5th BSME International Conference on Thermal Engineering, 21-23 December 2012, Dhaka, Bangladesh.
  25. Liaquat AM, Masjuki HH, Kalam MA, Varman M. Engine performance and exhaust emissions of a single cylinder CI engine fuelled with coconut biodiesel blended fuels. 5th AUN/SEED-Net Regional Conference on New/Renewable Energy 26-27 September 2012, School of Transportation Engineering, Hanoi University of Science and Technology.
  26. Liaquat AM, Masjuki HH, Kalam MA, Varman M. Impact of biodiesel on injector deposit formation. 5th AUN/SEED- Net Regional Conference on New/Renewable Energy 26-27 September 2012, School of Transportation Engineering, Hanoi University of Science and Technology.
  27. M. Shahabuddin, H.H. Masjuki, M.A. Kalam, M.A. Hazrat, M. Mofijur, Vizy Nazira, M.Varman, A.M. Liaquat, 2012.Biofuel: Potential Energy Source in Road Transportation Sector in Malaysia, SUSTAINABLE FUTURE ENERGY 2012 and 10th SEE FORUM, Innovations for Sustainable and Secure Energy,pp. 98-110. 21-23 November, Brunei Darussalam
  28. Masjuki HH, Kalam MA. An overview of biofuel as a renewable energy source: Development and Challenges. 5th BSME International Conference on Thermal Engineering, 21-23 December 2012, Dhaka, Bangladesh. (Keynote)
  29. Shahabuddin M, Masjuki HH, Kalam MA. Experimental investigation into tribological characteristics of bio-lubricant formulated from Jatropha oil. 5th BSME International Conference on Thermal Engineering, 21-23 December 2012, Dhaka, Bangladesh.
  30. Liaquat AM, Masjuki HH, Kalam MA, Varman M, Hazrat, MA, Shahabuddin M, Mofijur M. Application of blend fuels in a diesel engine. 2nd International Conference on Advances in Energy Engineering (ICAEE 2011), 27-28 December 2011,Bangkok, Thailand.
  31. Liaquat AM, Masjuki HH, Kalam MA, Varman M. Friction and wear characteristic of waste vegetable oil contaiminated lubricants. Regional Tribology Conference (RTC 2011), 22-24 November 2011, Bayview Hotel, Langkawi, Malaysia.
  32. Liaquat AM, Masjuki HH, Kalam MA, Varman, M, Hazrat MA. Experimental analysis on engine performance and emission characteristics using biodiesel obtained from non-edible oil. Regional Conference on Automotive Research (ReCAR 2011), 14-15 December 2011, Kuala Lumpur, Malaysia.
  33. Mofijur M, Masjuki HH, Kalam MA, Shahabuddin M, Hazrat MA, Liaquat AM. Palm oil methyl ester and its emulsions effect on lubricant performance and engine components wear. 2nd International Conference on Advances in Energy Engineering (ICAEE 2011), 27-28 December 2011, Bangkok,Thailand
  34. Shahabuddin M, Masjuki HH, Kalam MA, Mofijur M, Hazrat MA, Liaquat AM. Effect of additive on performance of C.I. engine fuelled with bio diesel. 2nd International Conference on Advances in Energy Engineering (ICAEE 2011), 27-28 December 2011, Bangkok, Thailand.
  35. A.M. Liaquat, H.H. Masjuki, M.A. Kalam, A. Rasyidi. Experimental Analysis of Wear and Friction Characteristics of Jatropha Oil added Lubricants. The 2010 International Conference on Mechanical and Aerospace Engineering (ICMAE 2010), Kuala Lumpur, Malaysia, Pp. 184 - 188, 26 - 28 November, 2010.

RESEARCH INTEREST

  • Biofuel
  • IC Engines
  • Tribology
  • Energy Efficiency

RESEARCH PROJECT

National
  1. 2019 - 2022, MPOB
    Dynamometer-Engine Endurance Testing Using B30 Palm Biodiesel ( Principal Investigator(PI))
  2. 2018 - 2020, RU Operation
    Enhancing Corrosion Resistance of Biodiesel Fueled Engines Using Chemically Active Oil Filter technology ( Principal Investigator(PI))
  3. 2015 - 2019, UM(Grand Challenge)
    Tribological characteristics of bio-based lubricant ( Principal Investigator(PI))
  4. 2015 - 2018, Fundamental Research Grant Scheme (FRGS)
    Improvement of diesel engine key fuel properties by optimizing alcohol-biodiesel-diesel blend ratio for low greenhouse gas emission ( Co-Researcher)
  5. 2015 - 2018, Fundamental Research Grant Scheme (FRGS)
    synergistic effect of nanographene on rheology and lubricating mechanism of biobased lubricant ( Principal Investigator(PI))
  6. 2017 - 2018, Geran Penyelidikan Universiti Malaya (UMRG)
    Self-sustained Hybrid Wind-Solar Green Energy Generation and Storage System ( Co-Researcher)
  7. 2013 - 2016, Fundamental Research Grant Scheme (FRGS)
    OPTIMIZATION OF HIGH QUALITY BIODIESEL FUEL FOR HIGHER THERMAL EFFICIENCY AND GREENHOUSE GAS (GHG) REDUCTION IN AUTOMOBILE ENGINE ( Principal Investigator(PI))
  8. 2014 - 2016, Bantuan kecil penyelidikan (BKP)
    Feasibility of green and fuel economy engine oil derived from bio based lubricant ( Principal Investigator(PI))
  9. 2012 - 2016, NONE
    Friction and wear performance evaluation of pure Non-doped DLC coating and doped DLC under different biodiesel oil-lubricated conditions ( Principal Investigator(PI))
  10. 2011 - 2015, High Impact Research (HIR)
    Clean diesel technology for military and civilian transport vehicles (HIR grant, RM 5.50mil.) ( Principal Investigator(PI))
  11. 2011 - 2015, High Impact Research (HIR)
    Experimental Investigation of New Bioenergy sources for Biofuel from Tropical Biodiversity ( Co-Researcher)
  12. 2011 - 2015, Geran Penyelidikan Universiti Malaya (UMRG)
    Automobiles fuel economy standards and label: implementation possibilities in Malaysia ( Co-Researcher)
  13. 2011 - 2015, High Impact Research (HIR)
    Phase Change material (PCM) for energy storage system ( Co-Researcher)
  14. 2013 - 2015, High Impact Research (HIR)
    Development of Alternative and Renewable EnergyCarrier (DAREC) ( Principal Investigator(PI))
  15. 2012 - 2015, Geran Penyelidikan Universiti Malaya (UMRG)
    EXPERIMENTAL STUDY OF TRIBOLOGICAL PROPERTIES OF DIAMOND-LIKE-CARBON (DLC) COATINGS FOR ENGINE CYLINDER ( Principal Investigator(PI))
  16. 2013 - 2015, PRPUM
    ON-BOARD EMULSIFIER FUEL SYSTEM FOR COMMERCIAL DIESEL ENGINE ( Principal Investigator(PI))
  17. 2012 - 2015, NONE
    Investigation into fuel property effects on ignition control and unregulated emissions in homogeneous charge compression ignition engine ( Director)
  18. 2013 - 2015, Bantuan Kecil Penyelidikan (BKP)
    Combustion analysis, performance and gaseous emission of a single cylinder diesel engine fuelled with tenary fuel using homogeneous charge compression ignition technique ( Co-Researcher)
  19. 2010 - 2015, NONE
    Time based/Transient simulation of engine coolant peak temperature after key-off ( Director)
  20. 2012 - 2014, Geran Penyelidikan Universiti Malaya (UMRG)
    Investigation into Fuel Property Effects on Ignition Control and Unregulated Emissions in Homogeneous Charge Compression Ignition Engine ( Principal Investigator(PI))
  21. 2011 - 2013, Geran Penyelidikan Universiti Malaya (UMRG)
    Tribological Studies on Non-edible Vegetable Oil Based Biodiesel in Diesel Engine Components ( Principal Investigator(PI))
  22. 2012 - 2013, Geran Penyelidikan Universiti Malaya (UMRG)
    The Tribological Behavior Comparison of these DLC Surface After the Wear Test ( Consultant)
  23. 2009 - 2012, ScienceFund
    Time-Based/Transient Simulation of Engine Coolant Peak Temperature After Key-Off (Techno Fund Project, RM538,600). ( Principal Investigator(PI))
  24. 2009 - 2012, Geran Penyelidikan Universiti Malaya (UMRG)
    Extensive Studies on Fame Oxidation and Thermal Stability (Project number: RG040-09AET,RM180,000). ( Consultant)
  25. 2009 - 2011, Geran Penyelidikan Universiti Malaya (UMRG)
    LUBRICITY AND TRIBO-PROPERTIES IMPROVEMENT STUDIES OF BIODIESEL FUEL PRODUCED FROM VARIOUS OIL SOURCES ( Co-Researcher)
  26. 2009 - 2011, ScienceFund
    5 kW Power Conditioning Unit for Micro-cogeneration Fuel Cell System ( Co-Researcher)
  27. 2009 - 2011, ScienceFund
    Development of Catalytic Fluid Pyrolysis Process from Oil Palm Biomass for Bio-Fuel Production ( Co-Researcher)
  28. 2008 - 2010, ScienceFund
    Palm Biodiesel Properties Enhancement for Automotive Application ( Co-Researcher)
  29. 2008 - 2010, ScienceFund
    Palm Diesel Properties Enhancement for Automotive Application ( Co-Researcher)
  30. 2008 - 2010, ScienceFund
    Development of Highly Efficient Fermentation Process for Bioethanol from Woody Biomass and Performance Study of a Small Diesel Engine Using Ethanol-blended Fuels ( Consultant)
  31. 2007 - 2009, ScienceFund
    Energy efficient nano coating to control solar radiation through the glasses of building windows ( Consultant)
  32. 2008 - 2009, ScienceFund
    Study of Corrosion and Tribo-Corrosion of Automotive Components and Their Durability in Palm Oil Base Fuel ( Co-Researcher)
  33. 2008 - 2009, Short Term Research Fund (Vote F)(PJP)
    Effect of vegetable oil blended lubricant on the performance and durability of small diesel engine ( Principal Investigator(PI))
  34. 2007 - 2009, ScienceFund
    Nanocomposite Based Eco-Friendly Solder for Microelectronic Packaging ( -Researcher)
  35. 1992 - 2009, Geran Penyelidikan Universiti Malaya (UMRG)
    Performance, Emission and Tribological Study of Gasoline, Diesel, Natural Gas and Vegetable Oil Fuelled Automobile Engine ( Project Leader)
  36. 1996 - 2009, Geran Penyelidikan Universiti Malaya (UMRG)
    Development and Implementation of a Control System for Natural Gas fuelled Automobile Engine ( Project Leader)
  37. 1993 - 2009, Short Term Research Fund (Vote F)(PJP)
    Friction and Wear Characteristics of Metallic and Polymeric Materials and Tribological Failure Investigation ( Project Leader)
  38. 2007 - 2009, ScienceFund
    Virtual design and manufacture of low head and low flowrate micro-hydro turbines ( Consultant)
  39. 2007 - 2009, ScienceFund
    Design of clothes dryer from room air conditioners waste heat ( Consultant)
  40. 2007 - 2009, ScienceFund
    Nanocomposite Based Eco-Friendly Solder for Microelectronic Packaging Applications ( Consultant)
  41. 2006 - 2009, MOSTI
    Dev. of environmental-safe biobased hydraulic fluid by chemical modification technique (based at Uni. Malaysia Trengganu) ( Consultant)
  42. 2006 - 2008, EU-ASIA Research Grant
    Feasibility study on the extensive utilization of biodiesel produced from waste and/or pure oils/fats in the public vehicle in Hangzhou (China) and preparations for the implementation of a demonstration plant ( -Project Leader)
  43. 2006 - 2008, ScienceFund
    Design and development of a car ventilator powered by solar energy ( Consultant)
  44. 2006 - 2008, ScienceFund
    Energy efficient nano coating to control solar radiation through the glasses of building windows ( Consultant)
  45. 2002 - 2006, MOSTI (IRPA)
    Performance and emission study of a new direct injection (DI) compressed natural gas (CNG) engine ( -Project Leader)
  46. 2002 - 2006, MOSTI (IRPA)
    Development and performance investigation of a domestic refrigerator using hydrocarbons and refrigerant mixtures ( Researcher)
  47. 2002 - 2006, MOSTI (IRPA)
    Modeling, design, modification and test of a higher efficiency palm oil diesel (POD) fueled compression ignition engine. ( -Project Leader)
  48. 2002 - 2006, MOSTI (IRPA)
    Fuel system; Direct Injection Natural Gas Technology, June 2002 - June 2006, Project Leader (Sub-Group Leader) ( Coordinator)
  49. 2002 - 2006, ScienceFund
    Performance and emission study of a new direct injection (DI) compressed natural gas (CNG) engine ( -Project Leader)
  50. 2002 - 2006, ScienceFund
    CNG/DI engine and transmission-Fuel System ( -Project Leader)
  51. 2004 - 2006, ScienceFund
    Development and performance investigation of a domestic refrigerator using hydrocarbons and refrigerant mixtures ( -Researcher)
  52. 2002 - 2005, MOSTI (IRPA)
    Modeling, design, modification and test of lubricant and cooling system of a new free piston gas linear generator ( -Project Leader)
  53. 2002 - 2005, ScienceFund
    Modeling, design, modification and test of lubricant and cooling system of a new free piston gas linear generator ( Project Leader)
  54. 1999 - 2003, ScienceFund
    Exhaust Gas Emission Control and Noise Reduction of Automotive Engines (Low Cost Catalytic Converter Development) ( Project leader)
  55. 1997 - 2002, ScienceFund
    An Engineering Analysis to Identify Energy Inefficient Residential Electrical Appliances and Setting Energy-Efficient Guidelines for These Appliances ( Project Leader)
  56. 1996 - 2001, ScienceFund
    Modeling, Design and Efficient Performance Appraisal of Automobile Engine combustion Chamber and Injector ( Project Leader)
  57. 1997 - 1999, Nippon Sheet Glass Foundation Project
    Climatical Degradation of Transparent heat Mirrors ( Project Leader)
  58. 1992 - 1998, Short Term Research Fund (Vote F)(PJP)
    Effect of Palm Oil Diesel on the Wear Rate of Metals and Small Diesel Engine Components ( Principal Investigator(PI))
  59. 1991 - 1993, Geran Penyelidikan Universiti Malaya (UMRG)
    Palm Oil Emulation as Cutting Fluid ( Project Leader)
International
  1. 1992 - 1997, ASEAN-AUSTRALIAN AAECP
    Energy Conservation in Industry ( Project Leader)
  2. 1990 - 1993, AAECP
    Development of an Electronics Based EnergyManagement Control System ( Consultant)
  3. 1988 - 1990, USAID
    Energy Conservation in Buildings Under theASEAN-US Energy Conservation and Management Programme ( Principal Investigator(PI))
University
  1. 2007 - 2009, Short Term Research Fund (Vote F)(PJP)
    Modelling, Simulation And Redesign of Electric Fan Blades to Optimize Energy Performance ( Consultant)
  2. 2007 - 2008, Geran Penyelidikan Universiti Malaya (UMRG)
    Biodiesel carbon deposit study using single cylinder engine ( Principal Investigator(PI))

CONSULTANCY PROJECT

  • Four Ball and Sem/Edx Test At UM Engine Tribology Laboratory, Md. Abul Kalam Azad, Central Queensland University,
    01 Dec 2016 - 01 Dec 2016 (International)
  • Four Ball and Sem/Edx Test At UM Engine Tribology Laboratory With Central Queensland University, Australia, Central Queensland University, Australia
    01 Dec 2016 - 01 Dec 2016 (International)
  • Oil Lubricity Testing At UM Engine Tribology Laboratory With Ong Brothers Petroleum Sdn Bhd, Ong Brothers Petroleum Sdn Bhd, Malaysia
    01 Dec 2016 - 01 Dec 2016 (National)
  • Biodiesel Four Ball and Sem/Edx Test At UM Engine Tribology Laboratory, Central Queensland University, Australia
    01 Dec 2016 - 01 Dec 2016 (International)
  • Performance and Emission Characteristics of Biodiesel Blend With Diesel, Department of Chemistry, UM
    01 Nov 2016 - 01 Nov 2016 (National)
  • Biodiesel Testing At Engine Tribology Laboratory, UM,, Associate Professor Mohammad G. Rasul, Central Queensland University, Australia
    01 Nov 2016 - 01 Nov 2016 (International)
  • Fuel Additives Testing At Department of Mechanical Engineering, UM, UKM, Malaysia
    01 Jan 2015 - 01 Jan 2015 (National)
  • Biopro Additive Testing On Coal, Eco Green Maintenance Sevices Sdn Bhd
    01 Jan 2015 - 01 Jan 2015 (National)
  • Fuel Additives Testing At Tribology Lab Department of Mechanical Engineering, UM, International Islamic Univesity, IIUM, Malaysia
    01 Jan 2015 - 01 Jan 2015 (National)
  • A Detailed Study On Consumer Behaviour Towards Electricity Consumption and End Uses of Electricity in The Industrial Sector, TENAGA NASIONAL BERHAD/National Electricity Board
    01 Nov 2006 - 01 Nov 2009 (National)
  • Lubricant Test At Engine Tribology Laboratory, UM, Quantum Global Trading Sdn Bhd
    01 Nov 2007 - 01 Nov 2008 (National)
  • Biodiesel Fuel Testing At Engine Tribology Laboratory, UM., Mr. Kumaran Palannisamy Senior Lecturer Dept. of Mechanical Engineering
    01 Nov 2008 - 01 Nov 2008 (University)
  • Fuel Efficient Booster Testing At Engine Tribology Laboratory, UM, NEW WORLD MARKETING SDN BHD
    01 Nov 2008 - 01 Nov 2008 (National)
  • Fuel Additive Testing At Engine Tribology Laboratory,UM, DXN BIOTECH CONSULTANTS SDN.BHD
    01 Nov 2008 - 01 Nov 2008 (National)
  • Lubricant Oil Test (Evp Oil) in Multi Cylinder Engine, ABEX MANUFACTURING SDN.BHD
    01 Nov 2008 - 01 Nov 2008 (National)
  • Iron Oxide Pigments Production, IOP Specialist Sdn Bhd
    01 Nov 2003 - 01 Nov 2005 (National)
  • Energy Use in The Transportation Sector in Malaysia, Economic Planning Unit in Collaboration with DANIDA of Denmark
    01 Nov 2004 - 01 Nov 2005 (International)
  • Energy Study in Transportation Sector in Malaysia, Economic Planning Unit in Collaboration with DANIDA of Denmark
    01 Nov 2004 - 01 Nov 2004 (International)
  • Study of Ngv Usage in Malaysia, Domestic Trade Division (KPDNHEP)
    01 Apr 2004 - 01 Apr 2004 (National)
  • Survey On Cng Usage in Malaysia, Ministry of Domestic Trade and Consumer Affairs
    01 Nov 2003 - 01 Nov 2003 (National)
  • Contextual Learning Module for Mechanical Engineering Field, METEOR-CORD International, USA-Ministry of Education Malaysia
    01 Nov 2001 - 01 Nov 2002 (International)

PAPER PRESENTED

PLENARY SPEAKER
  1. 30 Years of Tribology in Malaysia, The 6th ASIA International Conference on Tribology, MYTRIBOS (International) (17 Sep 2018 - 20 Sep 2018)
  2. Effect of Tribological Advancement on Emissions and Global Energy Consumption , International Mechanical and Industrial Engineering Conference IMIEC 2018, University of Malang Indonesia (International) (30 Aug 2018 - 31 Aug 2018)
  3. Tribology: It's Economic and Environmental Significance, The Second Mytribos Sysposium, MYTRIBOS (Malaysian Tribology Society) and Faculty of Mechanical Engineering, UTM (National) (08 Oct 2017 - 08 Oct 2017)
  4. Improving Thermal Efficiency of IC Engine: How Far Can We Go?, International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2016), Malaysia Automation Institute (International) (02 Aug 2016 - 03 Aug 2016)
  5. Biofuel, The Alternative Fuel for Future Transport, Is It Safe for Engine and Health?, 6TH INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING (ICME 2015), Faculty of Mechanical and Manufacturing Engineering, UTHM, Malaysia (International) (19 Oct 2015 - 21 Oct 2015)
  6. Prospects of biofuel as a driving fuel in transport sector., 3rd International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2013), Universiti Teknikal Malaysia (National) (30 Oct 2013 - 31 Jan 2014)
  7. An overview of biofuel as a renewable energy source: Development and Challenges, 5th BSME International Conference on Thermal Engineering, Bangladesh Society of Mechanical Engineers (International) (21 Dec 2012 - 23 Dec 2012)
  8. Impact of Various Biodiesel Blends on Engine Lubricating Oil during Endurance Test, International Symposium on Energy Technology and Strategy, ISETS 2012 (International) (22 Nov 2012 - 24 Nov 2012)
  9. Tribology Research Activities in MYTRIBOS and University of Malaya, Malaysia-Japan Tribology Meeting, MJIIT UTM KL Campus (International) (27 Aug 2012 - 28 Aug 2012)
  10. Development of energy efficiency standard and its impact on refrigerator-freezers energy consumption, Int. conf. On Domestic Use of Electrical Energy (01 Apr 2002 - 03 Apr 2002)
INVITED SPEAKER
  1. Biolubricant Developement; Current Scenario and Potential, International Conference on Engineering Tribology and Applied Technology (ICETAT2018), Taiwan Society of Tribology Technology (International) (16 Nov 2018 - 18 Nov 2018)
  2. To Be and Produce First Class Engineering Graduates: Why Vital, Guest Lecture, Faculty of Engineering , Syiah Kuala University, Aceh Indonesia. (International) (29 Mar 2017 - 29 Mar 2017)
  3. Biofuel Policies, Regulations, Strategies for Sustainable Development in Malaysia, Japan ASEAN Science and Technology Innovation Platform (JASTIP) Kick-off Workshop, Kyoto University, Japan (International) (29 Feb 2016 - 01 Mar 2016)
  4. High Performance Gas Engine with Direct Injection, JSPS-VCC Group Seminar2008, Natural Resources and Energy Environment, JSPS-VCC (27 Nov 2008 - 28 Nov 2008)
  5. State of quality management practices in SMIs: An empirical study, The International Industrial Engineering Conference (19 Dec 2004 - 24 Dec 2004)
  6. Exhaust Emission and Performance Evaluation of A Modified Spark Ignited Natural Gas Engine, JSPS-VCC Program on Environmental Science, Engineering and Ethics (07 Sep 2004 - 09 Sep 2004)
ORAL PRESENTER
  1. Engine performance and exhaust emissions of a single cylinder CI engine fuelled with coconut biodiesel blended fuels., The 5th AUN/SEED-Net Regional Conference on New/Renewable EnergySchool of Transportation Engineering, AUN/SEED-Net & Hanoi University of Science and Technology  (International) (26 Sep 2012 - 27 Sep 2012)
PRESENTER
  1. Basics of Tribology, the 4th Malaysia-Japan Tribology Symposium (MJTS) 2016, TriPreM, UTM (International) (25 Aug 2016 - 26 Aug 2016)
  2. Clean and Efficient Utilization of Low-Rank Coals and Biomass by Solvent Treatment, SATREPS Workshop, King Mongkut's University of Technology Thonburi (International) (01 Mar 2016 - 01 Mar 2016)
  3. The progress of biofuel towards achieving a sustainable world., Second International Conference on Electrical Engineering And Control Applications 2014 (ICEECA 2014), Departement of Electronics, Faculty of sciences and Technology, University Constantine, Algeria (International) (18 Nov 2014 - 20 Nov 2014)
  4. Lubricity of bio-based lubricant derived from different chemically modified fatty acid methyl ester, 41st LEEDS-LYON SYMPOSIUM on TRIBOLOGY (01 Sep 2014)
  5. Biofuel: policy, standardization and recommendation for sustainable future energy supply., The Mediterranean Green Energy Forum (MGEF-13), KES UK (16 Jun 2013 - 20 Jun 2013)
  6. Experimental investigation into tribological characteristics of bio-lubricant formulated from jatropha oil., 5th BSME- ICTE, BSME (International) (21 Dec 2012 - 23 Dec 2012)
  7. Storage Stability of Biodiesel. International Symposium on Energy Technology and Strategy, International Symposium on Energy Technology and Strategy, ISETS 2012 (International) (22 Nov 2012 - 24 Nov 2012)
  8. Impact of biodiesel on injector deposit formation, The 5th AUN/SEED-Net Regional Conference on New/Renewable EnergySchool of Transportation Engineering, AUN/SEED-Net & Hanoi University of Science and Technology  (International) (26 Sep 2012 - 27 Sep 2012)
  9. An experimental investigation of the biodiesel stability by means of oxidation and property determination, The Energy & Materials Research Conference (EMR2012), Spain Formatex Research Center  (International) (20 Jun 2012 - 22 Jun 2012)
  10. Thermal Systems Modeling and Simulation, SAE 2012 World Congress, SAE International (International) (24 Apr 2012 - 26 Apr 2012)
  11. Lubricity Study of Waste Cooking Oil, 1st Workshop on New/Renewable Energy, AUN/SEED-Net (11 Mar 2009 - 13 Mar 2009)
  12. Performance and Emissions Characterization of Diesel Engine Running With Re-formulated Palm Oil Methyl Ester-Diesel Blended Fuel, 4th International conference on thermal engineering: Theory and Application (12 Jan 2009 - 14 Mar 2009)
  13. Energy and Electricity Consumption Analysis of Malaysian Industrial Sector, 4th International conference on thermal engineering: Theory and Application (12 Jan 2009 - 14 Mar 2009)
  14. Wear and Friction Characteristics of Palm Oil Lubrication on Diamond-like Carbon Coating over Ni-resist Cast Iron, 2nd Int. Conference on Advanced Tribology 2008 (03 Dec 2008 - 05 Mar 2009)
  15. Energy Analysis of Cooling Pump in Internal Combustion Engine, 2008 International Mechanical Engineering Congress & Exposition, ASME (31 Oct 2008 - 06 Nov 2008)
  16. Energy Savings Potential by Substituting Driving With Walking and Cycling for Short Distance, the 2008 International Mechanical Engineering Congress & Exposition (31 Oct 2008 - 06 Nov 2008)
  17. Effects of Annealing Treatment on Optical Properties of Anatase TiO2 Thin Films, International Conference on Electric Power and Energy Systems, World Academy of Science (04 Jul 2008 - 06 Jul 2008)
  18. Pure Butane as Refrigerant in Domestic Refrigerator-Freezer, Second GMSRN International Conference 2007 (12 Dec 2007 - 14 Dec 2007)
  19. Energy-efficient optical coating for flat glass, AUN/SEED-Net 11th Field-Wise Seminar for Materials Engineering on Nanomaterials & Biomaterials and composite for Engineering Application (15 Nov 2007 - 16 Nov 2007)
  20. Energy and emissions analysis for household appliances in Malaysia, 22nd Euro conference on operation research (08 Jul 2007 - 11 Jul 2007)
  21. Friction and wear characteristics of biodiesel contaminated lubricants, Proc. 62nd Annual Meeting, STLE (06 May 2007 - 10 May 2007)
  22. Performance analysis of 1.6L Campro engine using Motec and OEM engine control unit, Proc. Int. Engineering Convention (10 Mar 2007 - 14 Mar 2007)
  23. An application of energy and exergy analysis at the transportation sector of Malaysia, Proc. of the 3rd BSME-ASME Int. Conf. On Thermal Engineering (20 Dec 2006 - 22 Dec 2006)
  24. Performance assessment of Bi-Fuel engine using gasoline and compressed natural gas as fuel, Proc. of the 3rd BSME-ASME Int. Conf. On Thermal Engineering (20 Dec 2006 - 22 Dec 2006)
  25. Lubricant quality assessment and wear of a biodiesel fueled engine, Proc. of the 3rd. Int. Conf. On Tribology (ASIATRIB 2006) (16 Oct 2006 - 19 Oct 2006)
  26. Friction and wear properties of diamond-like-carbon coating on Ni-resist cast iron under wet and dry condition, Proc. of the 12th Nordic Symposium on Tribology, (Nordtrib 2006) (07 Jun 2006 - 09 Jun 2006)
  27. Performance improvement of a diesel engine using additive in palm oil methyl ester, Proc. 18th Int. Internal Combustion Engine Symposium (20 Dec 2005 - 22 Dec 2005)
  28. Thermal analysis of diesel engine cylinder head deposits while operated by diesel-water emulsion fuel, 18th Int. Internal Combustion Engine Symposium (20 Dec 2005 - 22 Dec 2005)
  29. The effect of oxidized and non-oxidised palm oil methyl ester (POME) on the stability properties during time of storage, Proc. 18th Int. Internal Combustion Engine Symposium (20 Dec 2005 - 22 Dec 2005)
  30. Flash Temperature Parameter Number Prediction Model by Design of Tribological Experiments for Basestock Mineral Oil Containing Palm Olein and Aminephosphate Additives, World Tribology Congress (WTC III) (12 Sep 2005 - 16 Sep 2005)
  31. Emissions Characteristics of a Modified CNG Gasoline-Cycle Engine, Proc. of Asia Pacific oil and gas conference and exhibition (05 Apr 2005 - 07 Apr 2005)
  32. The use of Palm Oil Methyl Ester (POME) blended additive on turbocharged diesel engine, 7th Asia Pacific International Symposium on Combustion and Energy Utilization (11 Dec 2004 - 14 Dec 2204)
  33. The investigation of palm oil containing amine phosphate as an alternative lubricant, 1st Inter. Conf. On Advanced Tribology (ICAT 2004), NUS-Singapore (01 Dec 2004 - 13 Dec 2004)
  34. Development NOx emission predicted model for Palm Oil Methyl Ester fuelled diesel engine using Response Surface Methodology, World Renewable Energy Congress-VIII, WREN and NREL-USA (28 Aug 2004 - 03 Sep 2004)
  35. Thermal stability and effect of variable shear rate and temperature on oquette flow viscosity of natural plant oil, Int. Conf. On Fluid and Thermal Energy Conversion 2003 (07 Dec 2003 - 11 Dec 2001)
  36. Performance and Emissions Analysis of Biodiesel from Palm Oil Powered Diesel Engine with Turbocharger, The 14th Int. Symposium on Transport Phenomena (ISTP-14) (17 Jul 2003 - 22 Jul 2003)
  37. Viscometric Property of Several Vegetables Oils, The 14th Int. Symposium on Transport Phenomena (ISTP-14) (17 Jul 2003 - 22 Jul 2003)
  38. Performance of P10 TiN Coated Carbide Tools When End Milling AISI H13 Tool Steel At High Cutting Speed, Int. Conf. On Advances in Materials and Processing Technologies (AMPT 2003) (08 Jul 2003 - 11 Jul 2003)
  39. Deposit formation and gaseous emissions of a small diesel engine when operated on crude palm oil emulsion, 2nd Regional Conference on Energy Technology towards a Clean Environment (RCETCE) (12 Feb 2003 - 14 Feb 2003)
  40. Role of FT-IR in assessing lubricant degradation-A study on palm oil methyl ester blended lubricant, The Second Asia Int. Conf. On Tribology (ASIATRIB 2002) (21 Oct 2002 - 24 Oct 2002)
  41. An investigation on application of SPC tools in a medium sized manufacturing plant, 3rd Int. conf. On Quality and Reliability (ICQR2002) (28 Aug 2002 - 31 Aug 2002)
  42. Wear Surface Characteristics Study of Piston Ring and Ball Bearing Materials Under Palm Oil Methyl Ester Added Lubricant, 13th Int. Colloquium Tribology (15 Jan 2002 - 17 Jan 2001)
  43. Effect of palm oil methyl ester and its emulsions on lubricant degradation and engine wear, 13th Int. Colloquium Tribology (15 Jan 2002 - 17 Jan 2002)
  44. Coconut oil blended fuel as an alternative and renewable fuel for diesel engines, second International conference and 7th annual paper meet of the Mechanical Engineering Division (25 Oct 2001 - 27 Oct 2001)
  45. Effect of palm oil methyl ester and its emulsions on lubricant degradation and engine component wear, 2nd world tribology congress (03 Sep 2001 - 07 Sep 2001)
  46. Potential energy conversion from palm oil wastes in Malaysia, Int. conf. On integrated renewable energy for regional development (21 Aug 2001 - 23 Aug 2001)
  47. Potential CO2 Reduction by Fuel Substitution to Generate Electricity in Malaysia, Regional World Renewable Energy Congress (19 Feb 2001 - 22 Feb 2001)
  48. Corrosion characteristics of palm oil methyl ester blended lubricant under tribocontact, Int. Tribology Conference (29 Oct 2000 - 02 Nov 2000)
  49. Potential Electricity Savings by Implementing Energy Efficiency Standards for Household Electrical Appliances in Malaysia, World Renewable Energy Congress VI (WREC-2000) (01 Jul 2000 - 07 Jul 2000)
  50. Energy conservation opportunities in household refrigerator in Malaysia, 51st International appliances technical conference (IATC) 2000 (08 May 2000 - 10 May 2000)
  51. Minimum Energy Efficiency Standards for Room Air Conditioners in Malaysia: Estimating Electricity Savings Possibilities, , Int. Conference on Domestic Use of Electrical Energy, (DUEE) (18 Apr 2000 - 19 Apr 2000)
  52. Combustion Characteristics of Biological Fuel in Diesel Engine, SAE world congress (06 Mar 2000 - 09 Mar 2000)
OTHERS
  1. No Paper presented, the 3rd International Conference on Advanced Processes & Systems in Manufacturing (APSIM) 2016, Malaysian Tribology Society (International) (28 Aug 2016 - 30 Aug 2016)
  2. No Paper present, Doctoral Research Seminar on Renewable & Green Energy, University of Malaya (National) (10 Mar 2016 - 10 Mar 2016)
  3. Biodiesel-Diesel-Ethanol Ternary Blend on Cold Flow Properties and Particulate Matter of Diesel Engine Exhaust emission, International sustainable technology, energy & civilization conference (ISTECC 2016), MYKYOTO (International) (13 Feb 2016 - 13 Feb 2016)
  4. Effect of long chain alcohol additives on fuel properties and exhaust emission of biodiesel blends in a diesel engine, International sustainable technology, energy & civilization conference (ISTECC 2016), MYKYOTO (International) (13 Feb 2016 - 13 Feb 2016)
  5. MJIT, The Malaysia-Japan International Symposium on Tribology Technology 2016, Triprem, MJIIT, UTM-KL, Malaysia (International) (02 Feb 2016 - 04 Feb 2016)
  6. Biodiesel production, properties and emissions test characteristics of non-edible fuels in Diesel engine, International Conference on Green Technology (ICGT 2016), INP (International) (08 Jan 2016 - 09 Jan 2016)
  7. Tribological characteristics of diamond like carbon coating in the presence of Environment friendly vegetable based oils, International Conference on Engineering Tribology Technology 2014 (International) (21 Nov 2014 - 23 Nov 2014)
  8. Effect of piston material on piston skirt lubrication at initial engine start-up speed, 3rd Malaysia-Japan Tribology Symposium 2014 (MJTS2014), Malaysia-Japan International Institute of Technology (MJJIT) (International) (12 Nov 2014 - 14 Nov 2014)
  9. Effects of cam shaft speed and lubricant temperature on lubricant film thickness between Cam/tappet contact. , The 3rd Malaysia-Japan Tribology symposium 2014 (MJTS2014) (International) (12 Nov 2014 - 14 Nov 2014)
  10. Engine performance, emission and combustion characteristics of a common-rail diesel engine fuelled with bioethanol as a fuel additive in coconut oil biodiesel blends, The 6th International Conference on Applied Energy (ICAE2014), National Taiwan University (30 May 2014 - 02 Jun 2014)
  11. Impact of premixed kerosene fuel on performance, emission and combustion characteristics in partial HCCI engine, The 6th International Conference on Applied Energy (ICAE2014) (International) (30 May 2014 - 02 Jun 2014)
  12. Impact of premixed kerosene fuel on performance, emission and combustion characteristics in partial HCCI engine, The 6th International Conference on Applied Energy (ICAE2014), National Taiwan University (International) (30 May 2014 - 02 Jun 2014)
  13. Engine performance, emission and combustion characteristics of a common-rail diesel engine fuelled with bioethanol as a fuel additive in coconut oil biodiesel blends, The 6th International Conference on Applied Energy (ICAE2014) (International) (30 May 2014 - 02 Jun 2014)
  14. An Experimental Investigation of Denatured Anhydrous Ethanol-gasoline Fuel blends on the Performance and Emission Characteristics of a SI Engine., 2nd International Conference on Mechanical Engineering and Renewable Energy, CUET (International) (01 May 2014 - 03 May 2014)
  15. Experimental investigation of fuel properties and engine performance characteristics of a diesel engine fueled by optimum blend of palm and coconut biodiesel under turbocharged and non-turbocharged conditions., The 4th International Conference on Environment Science and Engineering (ICESE 2014) (International) (24 Apr 2014 - 26 Apr 2014)
  16. Optimization of fuels containing C2-C6 alcohols and gasoline and their effect on engine performance., The 4th International Conference on Environment Science and Engineering (ICESE 2014) (International) (24 Apr 2014 - 26 Apr 2014)
  17. Experimental investigation of fuel properties and engine performance characteristics of a diesel engine fueled by optimum blend of palm and coconut biodiesel under turbocharged and non-turbocharged conditions, 4th International Conference on Environment Science and Engineering (International) (24 Apr 2014 - 26 Apr 2014)
  18. Experimental investigation of fuel properties and engine performance characteristics of a diesel engine fueled by optimum blend of palm and coconut biodiesel under turbocharged and non-turbocharged conditions, 4th International Conference on Environment Science and Engineering (International) (24 Apr 2014 - 26 Apr 2014)
  19. Experimental investigation of fuel properties and engine performance characteristics of a diesel engine fueled by optimum blend of palm and coconut biodiesel under turbocharged and non-turbocharged conditions, 4th International Conference on Environment Science and Engineering (International) (24 Apr 2014 - 26 Apr 2014)
  20. Experimental investigation of fuel properties and engine performance characteristics of a diesel engine fueled by optimum blend of palm and coconut biodiesel under turbocharged and non-turbocharged conditions, 4th International Conference on Environment Science and Engineering  (International) (24 Apr 2014 - 26 Apr 2014)
  21. Optimization of fuels containing C2-C6 alcohols and gasoline and their effect on engine performance. Paper presented at the 2014 4th International Conference on Environment Science and Engineering, 24 April 2014 to 26 April 2014, Erzurum, Turkey, 4th International Conference on Environment Science and Engineering (International) (24 Apr 2014 - 26 Apr 2014)
  22. Assessing effect of idling on compression ignition engine operated with Palm, Jatropha and Calophyllum biodiesel blends, The International Engineering for Sustainability Conference 2014 (International) (18 Apr 2014 - 20 Apr 2014)
  23. Thermal Balancing of a multi-cylinder diesel engine operating on diesel, B5 and palm biodiesel blends. , The 5th International Conference on Environmental Science and Development (ICESD 2014) (International) (19 Feb 2014 - 21 Feb 2014)
  24. Experimental investigation of mustard biodiesel blend properties, performance, exhaust emission and noise in an unmodified diesel engine, The 5th International Conference on Environmental Science and Development (ICESD 2014) (International) (19 Feb 2014 - 21 Feb 2014)
  25. Effect of Synthetic Antioxidants on Emission Characteristics of a Coconut Biodiesel Powered Diesel Engine. , 2014 4th International Conference on Future Environment and Energy, (04 Jan 2014 - 05 Jan 2014)
  26. Effect of Magnesia on Zinc Oxide Stabilized Nano Alumina Ceramic Powder in Sintering Process and Its Impact on Mechanical Properties., The Malaysian International Tribology Conference 2013 (MITC2013), Malaysian Tribology Society (International) (18 Nov 2013 - 20 Nov 2013)
  27. Effect of synthetic antioxidants on storage stability of calophyllum-inophyllum biodiesel., 1st International Conference on the Science and Engineering of Materials (ICoSEM2013) (National) (13 Nov 2013 - 14 Nov 2013)
  28. Effect of injection timing on performance, emission and combustion characteristics of a common-rail diesel engine fuelled with coconut oil methyl ester., SAE/KSAE 2013 International Powertrains, Fuels & Lubricants Meeting, KSAE,Korea (International) (21 Oct 2013 - 23 Oct 2013)
  29. Thermal Engineering and Energy Science, The 5th BSME International Conference on Thermal Engineering, Dept of Mechanical and Chemical Engineering, Islamic University of Technology (International) (21 Dec 2012 - 23 Dec 2012)
  30. Effect of coconut biodiesel blended fuels on engine performance and emission characteristics, 5th BSME International Conference on Thermal Engineering, Bangladesh Society of Mechanical Engineers (International) (21 Dec 2012 - 23 Dec 2012)
  31. Corrosion of Magnesium and Aluminum in Palm Biodiesel: A Comparative Evaluation, 5th BSME International Conference on Thermal Engineering, BSME-IUT (International) (21 Dec 2012 - 23 Dec 2012)
  32. Biofuel: potential energy source in road transportation sector in Malaysia, Sustainable future energy (International) (21 Nov 2012 - 23 Nov 2012)
  33. INFLUENCE OF COCONUT BIODIESEL AND WASTE COOKING OIL BLENDED FUELS ON ENGINE PERFORMANCE AND EMISSION CHARACTERISTICS, Proceedings of the 2012 Fall Conference of the ASME Internal Combustion Engine Division (ICEF2012), ASME (International) (23 Sep 2012 - 26 Sep 2012)
  34. 2nd International Conference on Advances in Energy Engineering (ICAEE 2011), Effect of Additive on Performance of C.I. Engine Fuelled with Bio Diesel. (International) (27 Dec 2011 - 28 Dec 2011)
  35. Friction and Wear Characteristics of Palm Biodiesel,, Regional Tribology Conference RTC2011, MyTRIBOS (International) (22 Nov 2011 - 24 Nov 2011)
  36. Energy Technology and Strategy, International Symposium of Energy Technology and Strategy 2011, Research Center for Energy Technology and Strategy (International) (17 Nov 2011 - 19 Nov 2011)
  37. Integration of 1D and 3D Simulations of Engine Cooling System: After Keyed-Off, 10th International Symposium on Distributed Computing and Applications to Business, Engineering and Science, 2011., DCABES & IEEE (International) (14 Oct 2011 - 17 Oct 2011)

ACADEMIC/ PROF. SERVICES

Evaluation
  1. (2018) Reviewing many journal articles (more than 10 journal articles for the year 2018), (Reviewer)
  2. (2018) Evaluation of book on renewable energy, SERI UKM, (Reviewer)
  3. (2018) Associate Professor candidate applying for the post of full Professor, Faculty of Engineering, University Kebangsaan Malaysia. AP Dr Mariyam Jameelah Ghazali , (External Assessor-Expertise Committee)
  4. (2018) Evaluation of energy related courses (Member of Board of Study) Universiti Malaysia Perlis (UniMAP) Pusat Pengajian Kejuruteraan Mekatronik., (Advisory Committee)
  5. (2018) To offer expert advice on religious/Islamic matter, (Advisory Committee)
  6. (2018) To review YUTP fundamental research grant 2018 application , (External evaluator for Yayasan UTP-FRG Project.)
  7. (2016) External Examiner for PhD candidate at Universiti Tun Hussein Onn Malaysia on 15th December, (External Examiner)
  8. (2016) Appointed as IPT Evaluation Panel FRGS Evaluators by University of Malaya, (IPT Evaluation Panel)
  9. (2016) External Examiner for PhD candidate at Universiti Tun Hussein Onn Malaysia on December, (External Examiner)
  10. (2016) External Examiner for Ph.D. candidate at Institute of Technology Petronas (UTP), (External Examiner)
  11. (2016) External Examiner for MS candidate at Universiti Tun Hussein Onn Malaysia on February, (External Examiner)
  12. (2016) External Examiner for Ph.D. candidate at Universiti Tun Hussein Onn Malaysia on February, (External Examiner)
  13. (2016) External Examiner for Ph.D. candidate at The University of Nottingham Malaysia Campus, (External Examiner)
  14. (2016) Examiner for 2 Ph.D. candidates at International Islamic University Malaysia (IIUM), (External Examiner)
  15. (2016) Appointed as Panel Reviewer of Taylor's University Research Grant Application, (Reviewer)
  16. (2016) Appointed as Editor in ASEAN Engineering Journal, (Editor)
  17. (2015) External reviewer of Project Grant application, United Arab Emirates University, Dubai UAE, (Reviewer)
  18. (2015) PhD Thesis Evaluation, UTHM, (External Examiner)
  19. (2015) Taylor's University Malaysia Research Proposal for grant application, (Reviewer)
  20. (2015) One of the interview panels appointed by UEM to choose the best final year UM Faculty of Engineering student., (UEM Interview Panel)
  21. (2015) MSc thesis evaluation, UNITEN , (External Examiner)
  22. (2015) One of the interview panels appointed by UEM to choose the best final year UM Faculty of Engineering student., (UEM Interview Panel)
  23. (2015) Appointment as an External reviewer for the International Research, Invention and Innovation Exhibition (IRIIE 2015), (Reviewer)
  24. (2015) One of the interview panels appointed by UEM to choose the best final year UM Faculty of Engineering student., (UEM Interview Panel)
  25. (2015) PhD Thesis evaluation, UKM (4 candidates), (External Examiner)
  26. (2015) External Examiner at University pertahanan Nasional Malaysia , (External Examiner)
  27. (2013) Influence of Bacillus pumilus on the corrosivity of biodiesel obtained from Jatropha Curcus, (External Examiner)
  28. (2013) Appointed as external examiner for PhD thesis titled: AN EXPERIMENTAL INVESTIGATION TO STUDY THE PERFORMANCE, COMBUSTION AND EMISSION CHARACTERISTICS OF SARDINE OIL FUELLED DI DIESEL ENGINE, (External Examiner)
  29. (2013) Appointed as external examiner for PhD thesis titled: Influence of Bacillus pumilus on the corrosivity of biodiesel obtained from Jatropha Curcus , (External Examiner)
  30. (2012) as a Peer Committee for Evaluation of Academic Staff Promotion for Uniten, 01.07.2012- 30.06.2014., (External Examiner)
  31. (2012) sesi 2011/2012 (bil 2), Ogos 2012, (Internal Examiner)
  32. (2012) as one of the committee for Candidature Filtering for Academic Staff (JPCSA), Universiti of Malaya, on 11.09.2012. , (Internal Examiner)
  33. (2012) Committee for "Jawatan Kecil Tetap Sains", initiated by Ministry of Science, Technology and Innovation (Mosti)., (Committee)
  34. (2012) Promotion of 7 persons to Professor VK6, Professor VK7, Associate Prof DS54 respectively, in July 2012, UTM Staff , (External Examiner)
  35. (2012) Master Thesis, Titled: Evaluation of Friction and Wear Behavior of Coatings and Lubricants Using Tribo-meters and Machining Tests, Student Sdra. Sebastian Dayou, for Universiti Malaysia Sabah, in July 2012. , (External Examiner)
  36. (2012) For Master of Mechanical Engineering, titled as: Preparation of Rocket Grade Hydrogen Peroxide and Development of Hydrogen Peroxide Rocket of 10N Thrust, for Student Kuberaraaj Nambaraja, from UTM, in July 2012, (External Examiner)
  37. (2012) Master of Mechanical Engineering, For Student Mohd Aliff Hafifi Abdullah, Thesis titled as: Development of Notrocellulose based Binder for Aluminium, Ammonium Perchlorate Propellant, from Universiti Teknologi Malaysia, in July 2012, (External Examiner)
  38. (2012) Master Thesis Mechanical for Student Noor Emilia Ahmad Shafie, For Universiti Teknologi Malaysia, in Mac 2012. , (External Examiner)
  39. (2012) For Faculty of Mechanical Engineering, Universiti Malaysia Pahang, from 13 June 2012 till 12 June 2014, (External Examiner)
  40. (2012) Master of Science, Titled: Chemical Additives as Cold Flow Improver for Palm Oil and Jatropha Oil Biodiesel Fuels, Student Odeigah Edith Anwunli, For Univerisiti Putra Malaysia, in Mac 2012 , (External Examiner)
  41. (2012) For Candidate: Dr. Ir. Saiful Amri bin Mazlan, from MJIIT UTM Kuala Lumpur, in August 2012, (External Examiner)
  42. (2012) as one of the committee for Candidature Filtering for Academic Staff (JPCSA), Universiti of Malaya, on 29.03.2012. , (Internal Examiner)
  43. (2012) for Associate Professor Dr. Faiz Ahmad from Universiti Malaysia Pahang, on 04.07.2012 , (External Examiner)
  44. (2012) Penilaian Projek Arus Perdana di bawah Nic Penyelidikan Tenaga Keterbaharuan (tiga (3) projek), for UKM., (External Examiner)
  45. (2012) As a committee of Research Grant Evaluation for "Skim Geran Penyelidikan Pembangunan Prototaip" PRGS in year 2012. from 15.02.2012- 04.05.2012, KPT. , (External Examiner)
  46. (2012) Academic Advisor for Faculty of Mechanical Engineering, Universiti Teknologi Mara, from 01.05.2012 till 30.04.2014, (External Examiner)
  47. (2012) for Tender UM.G/PT1/804/2012/4, Proposal to Renovate and Upgrade Overall Mechanical and Electrical System at Level 1, HIRG Building, UM, in July 2012 , (Internal Examiner)
  48. (2012) Master of Science in Materials Engineering (Mixed Mode) Academic year 2012/2013 and 2013/2014 of Universiti Sains Malaysia , (External Examiner)
  49. The Mechanical Engineering Degree Program, Universiti Teknologi Malaysia, July 2000, (External Examiner)
  50. The Mechanical Engineering Degree Program, Universiti Kebangsaan Malaysia, August 2003, (External Examiner)
  51. The Mechanical Engineering Degree Program, Centre for the Mechanical Engineering Study, Universiti Sains Malaysia (USM), Session 2005/2006., (External Examiner)
  52. Appointed as panel member of Mechanical Engineering field to prepare criteria according to the field to audit engineering equipment of Malaysian Public Universities, since January 2008 by Ministry of Higher Education Malaysia, (External Examiner)
  53. Appointed as external examiner for Dept. of Chemistry, Faculty of Science, University of Cairo, Egypt Ph.D. candidate, 26 Nov., 2007, (External Examiner)
  54. Engineering Mechanics: Statics , Published by Dewan Bahasa dan Pustaka, Evaluated for the year 1990 Language Award, Organized by Linguistic Association Malaysia with co-operation from Public Bank Berhad.
  55. Evaluated 4 technical paper for Energy-The Int. Journal, Elsevier USA, 2005,2006 and 2007 Evaluated 2 technical papers for FUEL-The Int. Journal,2007
  56. Evaluated 2 technical papers for FUEL-The Int. Journal, Elsevier Japan, 2008. Evaluated 1 technical paper for Int. Journal on Energy, Elsevier USA, 2008.
  57. Four (4) Jordanian Universities, 3.10.1995 - 13.10.1995. , (External Examiner)
  58. Polytechnic of Manufacturing (POLMAN ) dan Program Kejuruteraan Aerospace, Institut Teknologi Bandung, Bandung Indonesia, 11 - 16 .4. 1997. , (External Examiner)
Contribution to external organisation
  1. (2016) Appointed as expert consultant national biodiesel program , UM-MPOB
  2. (2016) Appointed as Chairman council of national professor-UM Chapter, Council of National Professor, Malaysia
  3. (2016) Appointed as National Investigation committee , MPOB
  4. (2016) Appointed as committee member to select and recommend to the higher education ministry candidate for deputy vice chancellor (Development) UM, higher education ministry
  5. (2015) Interview panel for promotion of academic staffs to associate professor up to professor grade A, University of Malaya
  6. (2015) Interview panel for Student Royal Award (Anugerah DiRaja), University of malaya
  7. (2015) Research grant applications assessor for IPPP, University of Malaya
  8. (2015) Reviewer of International ISI journals, Elsevier, Hindawi, Springer, Pertanika UPM, MPOB journal etc
  9. (2015) Research grant applications assessor for FRGS and PRGS, Ministry of Higher Education Malaysia
  10. (2013) Research Collaboration Program, UMP, University
  11. (2013) Collaboration between NUST and UM in the area of tribology research., National Univesity of Sciences and Technology (NUST) and Centre for Energy Sciences, University of Malaya (UM), International
  12. (2013) Assessment Committee member of Fundamental Research Grant Scheme(FRGS), JABATAN PENGAJIAN TINGGI
  13. (2013) Assessment panel member of Exploratory Research Grant Scheme(ERGS), UNIVERSITI PERTAHANAN NASIONAL MALAYSIA
  14. (2013) Committee Member of Malaysian International Tribology Conference, Sabah, Malaysia, Malaysian International Tribology Society
  15. (2013) ASSESSOR OF ACADEMIC STAFF PROMOTION TO THE POST OF ASSOCIATE PROFESSOR GRADE DM54, UNIVERSITI TEKNOLOGI MARA
  16. (2013) ASSESSMENT PANEL MEMBER FOR POST GRADUATE PROGRAM AUDIT, Universiti Teknologi Malaysia
  17. (2013) Editorial board member of ASEAN Engineering Journal, AUN/SEED-Net
  18. (2013) International Scientific Committee member of Asian Conference on Mechanism and Machine Science, Tianjin University, Tianjian, China
  19. (2013) ASSESSMENT COMMITTEE MEMBER FOR THE EVALUATION OF ASSOCIATE PROFESSOR POSITION GRADE DS53/54, Universiti Malaysia Pahang
  20. (2013) Chairperson, Malaysian International Tribology Conference, Malaysian Tribology Society
  21. (2013) INTERVIEW PANEL MEMBER FOR PROMOTION TO THE POST OF ASSOCIATE PROFESSOR AND PRINCIPAL LECTURER, Universiti Tenaga Nasional
  22. (2013) Editorial Board member of Journal of Energy and Environment, Universiti Tenaga Nasional
  23. (2013) Assessment Committee member of Fundamental Research Grant Scheme(FRGS), JABATAN PENGAJIAN TINGGI
  24. (2013) Assessment Panel Member of Fundamental Research Grant Scheme(FRGS) Phase 2,2013, UNIVERSITI PERTAHANAN NASIONAL MALAYSIA
  25. (2012) Research collaboration with NCKU and University of Malaya, Research Center for Energy Technology and Strategy, NCKU and Centre for Energy Sciences, UM, International
  26. (2007) Biodiesel for Diesel Engine, Yanmar Co Ltd, Japan, International
  27. (2006) Asia Pro Eco Project (ASIA-EU), UM,Zhejiang U,Tianjin U,U di Napoli,Austrian Biofuels Institute & U of Cordova, International
  28. (2006) Science Fund Project Proposal External Evaluater, UKM
  29. (2006) Techno Fund Project Proposal Evaluator, MOSTI
  30. (2006) International Advisory Board Member, Engineering Journal, IIUM
  31. (2006) Science Fund Project Proposal Evaluater, UM
  32. (2005) IGS Project Proposal Evaluater, Ministry of Science, Technology and Innovation (MOSTI)
  33. (2004) JSPS-VCC Collaboration, University of Shiga Prefecture, Japan, International
  34. (2004) International Advisory Member, Journal of Mech. Eng. Res. and Dev. BUET, Bangladesh
  35. (2003) End Use Sector Advisory Board on Energy Efficiency in End Use Technologies (ABEEUT), Energy Commission Malaysia
  36. (2002) Top Down IRPA Project RMKe8 (LINEAR GENERATOR), UM, UKM, UTP, National
  37. (2002) Top Down IRPA Project RMKe8 (CNG/DI), UM, UKM, UTM, UPM, USM, UiTM, UTP, PRSS, National
  38. (2002) Mechanical Engineering Industrial Standard Committee (ISC F), SIRIM BHD
  39. (2000) JSPS-VCC Collaboration, Kyoto University, Japan, International

SUPERVISION

Under Graduate Students
  1. (2016) Final Year Project-3
  2. (2015) Final Year Project-1
  3. (2012) Final year Thesis
  4. (2011) Final Year Thesis
  5. (2010) Final Year Thesis
  6. (2009) Final Year Thesis
  7. (2008) Final year thesis
  8. (2007) Final year thesis
  9. (2006) Final year thesis
  10. (2005) Final year thesis
  11. (2004) Final year thesis
Postgraduate Student
PhD/ Doctoral
  1. (2018) Sesame Biodiesel Blended with Palmoil Diesel, Mujtaba Abas
  2. (2018) Cotton Seed Oil Biolubricant, Mustabshira Gul
  3. (2017) Improvement on Engine Performance and Emissions Reduction for Biofuel Blends in Diesel Engines, Gan Woun Yoong
  4. (2016) Production, Characterization and Performance of Cottonseed Methyl Ester (CSME) and Its Blends, Muhammad Jamshaid
  5. (2016) Effects of Ionic liquids as Bio-Based Lubricant Additive on Tribological Characteristic and Engine Performance, Muhammad Syahir Amzar bin Zulkifli
  6. (2016) Coating of carbon based materialon flexible polymer sheet, Muhammad Zulfattah Bin Zakaria
  7. (2015) Investigation of Chicoreus Brunneus Seashells as a Catalyst in Biodiesel Production, Hoora Mazaheri
  8. (2014) Optimization on the performance and emission of enhanced biofuel via enzymatic reaction from tropical biodiversity blend with waste cooking oil, Jassinnee Milano
  9. (2014) Bioethanol production and engine performance using manihot glaziovi and sweet sorghum, ABDI HANRA SEBAYANG
  10. (2014) Biodiesel production, characterization and engine performance using mixed jatropha curcas and ceiba pentandra oil, SURYA DHARMA
  11. (2013) TRIBOLOGICAL STUDY OF NANOPARTICLES ENRICHED BIO-BASED LUBRICANTS FOR ENGINE PISTON RING-CYLINDER INTERACTION, Mubashir Gulzar
  12. (2013) Tribological Analysis of Diamon-Like Carbon (DLC) Coatings in Combination with Bio-lubricants for Engine Cam-Tappet Interaction, Rehan Zahid
  13. (2013) Retardation of Corrosion and Tribological Degradation of Automotive Materials in Palm Biodiesel, Sazzad Bin Sharif
  14. (2013) Effect of Surface texturing on tribological performance of Engine Valve train system, Arslan Ahmed
  15. (2012) THERMOELECTRIC PROPERTIES OF NOVEL MICROSTRUCTURALLY MODIFIED CoSb3 SKUTTERUDITE MATERIALS BY MINOR DOPANTS OF Mn, Hf, Al, Bi AND Yb, Mohamed Hamid Elsheikh Yousef
  16. (2012) MICRO GEAR ENGINEERING, EDZROL NIZA MOHAMAD
  17. (2012) Designs And Manufacturing Processes For Solar Components And Systems For Imrpoved Performance, Reliability And Service Life, Nang Khin Chaw Sint
  18. (2010) Tribological studies and performance evaluation of a palm diesel fuelled compression ignition engine, Nurin Wahidah Mohd Zulkifli
  19. (2010) Tribological Behaviour of Pyrolysed Bio-Oil and Pure Plant Oils as Lubricant, IMAN GOLSHOKOUH (M0100105)
  20. (2010) Study on Performance, Combustion Characteristic and Emissions of Biodiesel in Compression Ignition Engine, HOW HEOY GEOK
  21. (2010) Reasearch Work Progressing on: Environmental & Building Studies, GOLNOOSH MANTEGHI (M0100105)
  22. (2010) Feasibility study of jatropha oil as biodiesel, Aridina Susan Silitonga
  23. (2010) Energy Policy, Abdelaziz Emadeldin Atabani
  24. (2010) Common-rail fuel injection system for biodiesel engine, Mr. Muhamad Adlan Bin Abdullah (M0100105)
  25. (2010) Combustion, Performance and Gaseous Emissions Study of a Single Cylinder Diesel Engine Fuelled with Ternary Fuel using Homogeneous Charge Compression Ignition (HCCI) Technique, TEOH YEW HENG
  26. (2010) Biodiesel production from Micro-algae, Cheah Mei Yee
  27. (2009) Energy Policy Of Malaysia, SHAFINI MOHD SHAFIE
  28. (2009) Energy Management Implementation Of An Office Building Via Peak Shaving Method, BEHZAD RISMANCHI
  29. (2008) STUDY ON COMBUSTION, NOISE AND EXHAUST EMISSIONS CHARACTERISTICS OF A BIODIESEL FUELLED ENGINE, Liaquat Ali Memon
  30. (2008) Engineering Technology (Manufacturing), Punnose P. Kovoor A/L Punnose K.P. (University of Malaya (UM))
  31. (2008) Energy (alternative fuel), Ong Hwai Chuan
  32. (2008) Automotive Air Conditioning, Jamal Uddin Ahamed
  33. (2007) Tribo-Corrosion, Mohammad Abul Fazal
  34. (2007) Materials Engineering, Mohammad Tajally (University of Malaya (UM))
  35. (2006) Surface Engineering, Bushroa Abd. Razak
  36. (2006) Hydrogen Energy, Adnan Rosli
  37. (2006) Energy, Abdullah A. A . A. Al Rashid (University of Malaya (UM))
  38. (2002) Hydraulic Fluid, Wan Norsani Wan Nik (M0100105)
  39. (2002) Heat Pump, Abdessalam Hamlaoui
  40. (2002) Energy Efficiency, Saidur Rahman
  41. (2001) TQM, Shamsuddin Ahmed
  42. (2001) CNG-DI Engine Performance and Emission Study, Md Abul Kalam
  43. (2000) Metal Cutting, Jaharah Abd Ghani
  44. (1997) Energy Efficiency, TM Indra Mahlia
  45. (1995) Wear of Automotive Cylinder Liner, Md. Abdul Maleque
  46. (1992) Engine Management System, Omran El-Hadi
  47. (1990) Thermal Characteristics of Malaysian Building Envelopes, K.S. Kannan
Master
  1. (2016) Synergistic Effect of Nanographene on Rheology and Lubricating Mechanism of Bio-Based Lubricant, Muhammad Harith bin Hasnul
  2. (2016) Iso-butanol additive in ethanol-gasoline blend fuel, Hazim bin Sharudin
  3. (2015) Tribological Study of Bio-Based Lubricant, Nurul Adzlin Binti Zainal
  4. (2015) Experimental Study and Improvement on Tribological Behaviors of Automotive Lubricants with Dilution of Various Gasoline-Bioethanol Blends, Leang SoKhuong
  5. (2015) Evaluation of Simplified Engine Split Cooling System on Vehicle Performance, Tengku Muhammad Ibrahim Salahuddin Bin Tengku Ahmad
  6. (2015) Comparative Study of Ethanol and Isobutanol as Gasoline Blend for Internal Combustion Engine, Mohd Nur Ashraf bin Mohd Yusoff
  7. (2014) QUALITY IMPROVEMENT OF DIESEL-BIODIESEL-BUTANOL/ PENTANOL BLENDS USING CETANE IMPROVER AND FEASIBILITY STUDY AS ENGINE FUELS., Kazi Imdadul Hassan
  8. (2014) PRODUCTION PROCESS OPTIMIZATION AND COMBUSTION EVALUATION OF APHANAMIXIS BIODIESEL BLEND IN A DIESEL ENGINE, Md. Ruhul Amin
  9. (2014) Lubrication properties of palm biodiesel: A study on stability and improvement, Sundus Fatimah
  10. (2014) Improvement of cold flow properties of biodiesel using PMA additive to reduce exhaust emission, Mohammad Monirul Islam
  11. (2014) Friction and wear characteristics of fatty acid methyl ester from different type of vegetable oils, Mohammad Mosarof Hossain
  12. (2014) Eeffect of antioxidants on engine performance using calophyllum and moringa biodiesels., Rashedul Hasan Khondakar
  13. (2014) Biodiesel Synthesis via Heterogeneous Carbon Acid Catalysis from De-Oiled Jatropha Curcas Waste, Haziratul Mardhiah binti Hamdan
  14. (2014) Biodiesel Production from Ceiba Pentandra Oil using Enzyme Catalyst, Norjannah Binti Basan
  15. (2013) Tribological Performance of Palmitic Acid as Lubricant Additives for Rotary Compressor, Abdul Halim Ahmad
  16. (2013) Study on stability, fuel property and combustion, performance and emission analysis of palm and waste cooking oil bio-diesel - water micro-emulsion, Syeda Reham Shahed
  17. (2013) IMPROVEMENT OF OXIDATION STABILITY OF BIODIESEL BLENDS FOR LOW EXHAUST EMISSION OF IC ENGINE., Mohammad Rashed Mia
  18. (2013) Idling reduction strategies by using different new blends of biodiesel and their effect on fuel consumption and exhaust emissions of compression ignition engine, Shancita Islam
  19. (2013) COMBUSTION AND REDUCTION OF NITROGEN OXIDE USING MORINGA, RICE BRAN AND, Md. Abdul Wakil
  20. (2013) ANALYSIS OF PARTICULATE MATTER, CARBON EMISSIONS AND ELEMENTAL COMPOSITIONS FROM A DIESEL ENGINE EXHAUST FUELLED WITH DIESEL-BIODIESEL BLENDS, Mohammd Ashraful Alam
  21. (2013) Analysis of Particulate matter, carbon emission, and elemental composition from an diesel engine exhaust fuelled with diesel biodiesel blends, Mohammad Ashraful Alam
  22. (2012) Study of different Idling Reduction Techniques and their cost effectiveness for fuel efficient transport vehicles in tropical countries, S M Ashrafur Rahman
  23. (2012) INFLUENCE OF GAS-TO-LIQUID FUEL IN THE COMBINED BLENDS OF BIODIESEL-DIESEL, Sajjad Hossain
  24. (2012) Heat transfer characteristics of diesel engine using alternative fuels, Md. Joynul Abedin
  25. (2012) Feasibility of diesel-biodiesel-bioethanol blended fuels for diesel engines, ALI SHAHIR SHAWKAT
  26. (2012) Experimental evaluation of oxygenated additives on improving biodiesel-diesel blends fuelling diesel engines, Imtenan Sayeed
  27. (2012) Comparison of properties, engine performance and emission characteristics of PAH, NOx, unburned HC and PM for bioethanol and palm-coconut biodiesel blends in an unmodified automotive diesel engine, Sanjid Ahmed Patwary
  28. (2012) A COMPARISON OF TRIBOLOGICAL BEHAVIOR OF DIFFERENT BIODEGRADABLE FATTY ACID METHYL ESTER AS ENGINE FUEL, Md. Habib Ullah
  29. (2011) WEAR AND DEGRADATION OF POLYMERS USED IN ORTHOPAEDIC APPLICATIONS, Shahira Liza Binti Kamis
  30. (2011) Study on NOx reduction strategy in biodiesel blended fuel, Md. Palash Sarker
  31. (2011) Stability improvement and engine emissions of synthetic antioxidant treated palm, jatropha and calophyllum biodiesel, Islam Md Rizwanul Fattah
  32. (2011) Sifat Nanotribologi Bahan Nanooksida Dalam Cecair Ionik, Ahmad Termizi Bin Hamidunsani (M0100101)
  33. (2011) OPTIMIZATION OF ALCOHOL-GASOLINE BLENDED FUEL FOR IMPROVING PERFORMANCE AND REDUCING EXHAUST EMISSION OF A SPARK IGNITION ENGINE, MD. MASUM BILLAH
  34. (2011) Comparative Evaluation of Jatropha-Palm-Coconut Biodiesel Blends Fuel Properties, Engine Performance and Exhaust Emissions, Md Arbab Iqbal
  35. (2010) Transient simulation of engine coolant temperature, Pang Suh Chyn
  36. (2010) Experimental Study of Additive Infused Biodiesel Fuel in Compression Ignition Engine, MD. MOFIZUR RAHMAN
  37. (2009) Transient Heat Transfer Flow Simulation of an Internal Combustion Engine Cooling System, Md. Hazrat Ali
  38. (2009) Comparison Of Corrosion Of Magnesium And Aluminium In Palm Biodiesel, CHEW KING VEE
  39. (2008) Palm Diesel Properties Enhancement Study for Automotive Application, Md. Jayed Hussan
  40. (2008) Microelectronic Packaging, Ashraful Haque
  41. (2008) ANN and RMS model for CNG engine, Md. Jahirul Islam
  42. (2006) Nano-coating, Mohammad Mahamood Hasan
  43. (2006) Energy Efficiency, Hassanuzzaman
  44. (2005) Referigeration, Md. Abdus Sattar
  45. (2005) Energy in Transportation, Aizura Awang Bakar (University of Malaya (UM))
  46. (2004) Engine Deposite Due to Biofuel use in automobile engine, Saifullah M. Ghazaly (University of Malaya (UM))
  47. (2004) Energy Standard, Liaquat Ali Memon
  48. (2004) Energy Efficiency, Norhasyima Rahmad Sukor Samad
  49. (2003) Fuel Injector, Ainil Jalaludin
  50. (2002) Linear Engine, Taufiq Binnur
  51. (2002) Compressed Natural Gas, Md Aslam Uddin
  52. (2001) Energy Efficiency, Mahendra Varman (University of Malaya (UM))
  53. (2001) Biofuel, Husnawan Mutiara
  54. (2000) Catalytic converter, Noor Leha Abd. Rahman
  55. (2000) Catalytic converter, Abdul Hadi (University of Malaya (UM))
  56. (2000) Alternative fuel, Chen Ki Yaw
  57. (1999) Biofuel Deposit, Irfan Hatim (University of Malaya (UM))
  58. (1998) Engine Wear, Md. Abul Kalam
  59. (1998) Engine Deposits, Mesbah Mohamed Slem (University of Malaya (UM))
  60. (1998) Engine control, Hazem Mohamed Mohamed (University of Malaya (UM))
  61. (1998) Energy Efficiency of Washing Machine, Abu Saleh Ahmed (University of Malaya (UM))
  62. (1998) Energy Efficiency of Some Domestic Appliances, Saidur Rahman (University of Malaya (UM))
  63. (1997) Approach of TQM, Latha Devi Nayar
  64. (1996) Energy Efficiency, Tan Chew Sia
  65. (1996) Delta Handler Maintenance Using Total Productive Maintenance, Teo Bee Kak (University of Malaya (UM))
  66. (1995) Internal Combustion Engine, Sii How Sing (University of Malaya (UM))
  67. (1992) Quality Control & Design, Loh Beng Teong (University of Malaya (UM))
  68. (1992) Manufacturing, Tan Kian Guan (University of Malaya (UM))

TEACHING

Master
  1. (2007) KXGM6306 - Internal Combustion Engine
Bachelor
  1. (2019) KMEM4364 - Internal Combustion Engine
  2. (2018) KIG2008 - Manufacturing Technology
  3. (2018) KMEM3173 - Intergrated Project Design
  4. (2018) KMEM3175 - Integrated Design Project
  5. (2018) KMEM4344 - Tribology
  6. (2017) KMEM4282 - Final Year Graduation Project Ii
  7. (2017) KMEM4344 - Tribology
  8. (2016) KMEM1103 - Introduction to Manufacturing Technology
  9. (2016) KMEM4344 - Tribology
  10. (2013) KMEM1103 - Introduction to Manufacturing Technology
  11. (2012) KMEM1101 - Statics
  12. (2011) KMEM1101 - Statics
  13. (2011) KMEM1103 - Introduction to Manufacturing Technology
  14. (2011) KMEM4344 - Tribology
  15. (2010) KMEM1101 - Statics
  16. (2010) KMEM4344 - Tribology
  17. (2009) KMEM1101 - Statics
  18. (2009) KMEM1101 - Statics
  19. (2009) KMEM4344 - Tribology
  20. (2009) KMEM4344 - Tribology
  21. (2008) KMEM3171 - Capstone Project
  22. (2007) KMEM4344 - Tribology
  23. (2006) KMEM4344 - Tribology
  24. (2005) KMEM4344 - Tribology
  25. (2004) KMEM4344 - Tribology

PATENT/ IPR

  • AIR DIRECTING SYSTEM TO VEHICLES UNDERHOOD HEAT EXCHANGERS
    Patent (National)
  • Electro-Mechanical Arrangement & Control Methodology Development For Transient Cooling System Of Automotive Engine at Idle Speed And Key-Off Condition.(UM.TNC2 NlIClCl603 I 424)
    Patent (National)
  • Air Directing System to Vehicles Underhood Heat Exchangers.(UM.TNC2/UMCIC/603/425)
    Patent (National)
  • Fuel Rail For Direct Injection Gaseous Engine
    Patent
  • Compressed Natural Gas Fuel Injection System and Method (MY-141689-A)
    Patent (National)
  • Compressed Natural Gas Fuel Injection System And Method
    Patent (National)
  • Nozzle And Seat Geometry for Direct Injection
    Patent
  • Method for Controlling Multiple-Injection of Gaseous Fuel In a Direct Injection Engine
    Patent (National)
  • Test Method and Optimization of Ignition System Parameter Inside CNG/DI Engine
    Patent (National)

SOCIAL RESPONSIBILITY ACTIVITIES

  • Begin Challenge SMK Keramat Wangsa, Kuala Lumpur (Group 2), (01 Mar 2018 - 31 May 2018)
  • Secretary, Council of National Professors: Engineering and Technology Cluster. Breaking of Fast in The Month of Ramadhan (2015) With Orphanage At Paum, (01 Aug 2010 - 15 Jul 2015)
  • Parent and Teacher Association, Malay Collage, Kuala Kangsar, (01 Feb 2005)
  • University of Malaya Cooperative Member, (11 Feb 2000)
  • Area Farmers Association, Hulu Klang, Selangor D.E, (02 May 1999)
  • Mosque Executive Committee Member, Kampung Klang Gate Mosque, Gombak, Selangor, (01 Feb 1999 - 10 May 2001)
  • Malay Collage Old Boys Association, Kuala Lumpur, (05 Apr 1996)
  • University of Leeds UK, Alumni Society Member, (05 Jul 1985)