UMEXPERT - DR. KAZI MD. SALIM NEWAZ

Publication
Research

ARTICLE IN ACADEMIC JOURNALS

NO	DETAILS OF ARTICLE IN ACADEMIC JOURNALS
1.	Graphene nanoplatelet nanofluids stabilised by hybridisation with graphene oxide: preparation, stability, and performance in flat plate solar thermal collector 2023 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
2.	ZnO intercalated into graphene oxide based 2-D binary composite for improved thermal properties using as a potential nanofluid 2023 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF MOLECULAR LIQUIDS DOI : https://doi.org/10.1016/j.molliq.2023.123426
3.	The Effect of Angled Fins in Generating Swirling Flows with Vortices That Augment Heat Transfer Performance in an Annular Conduit 2023 Author(s) : Kazi Md. Salim Newaz Source : INTERNATIONAL JOURNAL OF ENERGY RESEARCH DOI : https://doi.org/10.1155/2023/5104085
4.	Improvement of heat transfer and fouling retardation performance of heat exchanger using green functionalized graphene nanoplatelets additives 2023 Author(s) : Kazi Md. Salim Newaz Source : Journal of the Taiwan Institute of Chemical Engineers DOI : https://doi.org/10.1016/j.jtice.2023.105227
5.	Rheological and thermophysical properties of hybrid nanofluids and their application in flat-plate solar collectors: a comprehensive review 2023 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY DOI : 10.1007/s10973-023-12184-3
6.	Heat transfer and friction loss of flowing kenaf core non-wood pulp fibre suspensions to curb reject papers 2023 Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz Source : HEAT AND MASS TRANSFER DOI : 10.1007/s00231-022-03281-4
7.	Experimental and numerical investigations on the effect of a novel internal surface micro-grooving toward improving convective heat transfer performance of tube heat exchangers 2023 Author(s) : Kazi Md. Salim Newaz Source : PHYSICS OF FLUIDS DOI : https://doi.org/10.1063/5.0150094
8.	Experimental and numerical investigations on the effect of a novel internal surface micro-grooving toward improving convective heat transfer performance of tube heat exchangers 2023 Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz, Mohd Ridha Bin Muhamad @ Mohd Ata'illah Source : PHYSICS OF FLUIDS DOI : 10.1063/5.0150094
9.	Heat transfer and friction loss of flowing kenaf core non-wood pulp fibre suspensions to curb reject papers. 2023 Author(s) : Kazi Md. Salim Newaz Source : HEAT AND MASS TRANSFER
10.	Mitigation of CaCO3 fouling on heat exchanger surface using green functionalized carbon nanotubes (GFCNT) coating 2023 Author(s) : Kazi Md. Salim Newaz Source : Thermal Science and Engineering Progress DOI : https://doi.org/10.1016/j.tsep.2023.101878
11.	Investigation of zirconium (Zr) coated heat exchanger surface for the enhancement of heat transfer and retardation of mineral fouling 2023 Author(s) : Wong Yew Hoong, Kazi Md. Salim Newaz Source : Journal of the Taiwan Institute of Chemical Engineers
12.	Application of PEG-Fe3O4 nanofluid in flat-plate solar collector: An experimental investigation 2023 Author(s) : Kazi Md. Salim Newaz Source : SOLAR ENERGY MATERIALS AND SOLAR CELLS DOI : https://doi.org/10.1016/j.solmat.2023.112566
13.	Retardation of CaCO3 fouling on heat exchanger surface using water-based cloves-functionalized multiwall carbon nanotubes (C-MWCNT) nanofluids. 2023 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY DOI : https://link.springer.com/article/10.1007/s10973-023-12551-0
14.	Graphene nanoplatelet nanofluids stabilised by hybridisation with graphene oxide: preparation, stability, and performance in flat plate solar thermal collector 2023 Author(s) : Mohd Nashrul Bin Mohd Zubir, Ong Zhi Chao, Chew Bee Teng, Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY DOI : 10.1007/s10973-022-11866-8
15.	Retardation of CaCO<sub>3</sub> fouling on heat exchanger surface using water-based cloves-functionalized multiwall carbon nanotubes (C-MWCNT) nanofluids 2023 Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY DOI : 10.1007/s10973-023-12551-0
16.	Effect of different tube sizes on heat transfer characteristics of functionalized GNP and metal oxide nanofluids in conduit flow heat exchanger 2023 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY DOI : https://link.springer.com/article/10.1007/s10973-023-12595-2
17.	Mitigation of CaCO3 fouling on heat exchanger surface using green functionalized carbon nanotubes (GFCNT) coating 2023 Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz Source : THERMAL SCIENCE AND ENGINEERING PROGRESS DOI : 10.1016/j.tsep.2023.101878
18.	Rheological and thermophysical properties of hybrid nanofluids and their application in flat-plate solar collectors: a comprehensive review 2023 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
19.	Energy, exergy and economic (3E) analysis of flat-plate solar collector using novel environmental friendly nanofluid 2023 Author(s) : Kazi Md. Salim Newaz Source : Scientific Reports
20.	Effects of thermophysical, hydrodynamics and thermal characteristics of well stable metallic nanofluids on energy transportation (vol 147, pg 13879, 2022) 2023 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY DOI : 10.1007/s10973-022-11905-4
21.	The Effect of Angled Fins in Generating Swirling Flows with Vortices That Augment Heat Transfer Performance in an Annular Conduit 2023 Author(s) : Kazi Md. Salim Newaz Source : INTERNATIONAL JOURNAL OF ENERGY RESEARCH DOI : 10.1155/2023/5104085
22.	Effects of thermophysical, hydrodynamics and thermal characteristics of well stable metallic nanofluids on energy transportation 2023 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
23.	Efects of thermophysical, hydrodynamics and thermal characteristics of well stable metallic nanofuids on energy transportation 2022 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY DOI : https://doi.org/10.1007/s10973-022-11696-8
24.	A review of recent advances in green nanofluids and their application in thermal systems 2022 Author(s) : Kazi Md. Salim Newaz Source : Chemical Engineering Journal DOI : https://doi.org/10.1016/j.cej.2021.132321
25.	Review on Aqueous Graphene Nanoplatelet Nanofluids: Preparation, Stability, Thermophysical Properties, and Applications in Heat Exchangers and Solar Thermal Collectors 2022 Author(s) : Kazi Md. Salim Newaz Source : APPLIED THERMAL ENGINEERING DOI : https://doi.org/10.1016/j.applthermaleng.2022.118342
26.	Thermal performance of a flat-plate solar collector using aqueous colloidal dispersions of multi-walled carbon nanotubes with different outside diameters 2022 Author(s) : Kazi Md. Salim Newaz Source : EXPERIMENTAL HEAT TRANSFER DOI : https://doi.org/10.1080/08916152.2020.1847215
27.	Heat transfer and pressure drop characteristics of two phase flow in helical coils 2022 Author(s) : Kazi Md. Salim Newaz Source : Thermal Science and Engineering Progress DOI : https://doi.org/10.1016/j.tsep.2021.101143
28.	Investigation of heat transfer performance within annular geometries with swirl‑inducing fns using clove‑treated graphene nanoplatelet colloidal suspension 2022 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY DOI : https://doi.org/10.1007/s10973-022-11733-6
29.	Nanofuids thermal performance in the horizontal annular passages: a recent comprehensive review 2022 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY DOI : https://doi.org/10.1007/s10973-022-11389-2
30.	Experimental study on the effects of multi-resonance plasmonic nanoparticles for improving the solar collector efficiency 2022 Author(s) : Kazi Md. Salim Newaz Source : RENEWABLE ENERGY DOI : https://doi.org/10.1016/j.renene.2022.01.051
31.	Nanofluids thermal performance in the horizontal annular passages: a recent comprehensive review 2022 Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY DOI : 10.1007/s10973-022-11389-2
32.	A facile, green fabrication of aqueous nanofluids containing hydrophilic functionalized carbon nanotubes toward improving heat transfer in a closed horizontal flow passage 2022 Author(s) : Kazi Md. Salim Newaz Source : POWDER TECHNOLOGY DOI : https://doi.org/10.1016/j.powtec.2022.117451
33.	Experimental study on the effects of multi-resonance plasmonic nanoparticles for improving the solar collector efficiency 2022 Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz Source : RENEWABLE ENERGY DOI : 10.1016/j.renene.2022.01.051
34.	Hydrothermal and energy analysis of flat plate solar collector using copper oxide nanomaterials with different morphologies: Economic performance 2022 Author(s) : Kazi Md. Salim Newaz Source : Sustainable Energy Technologies and Assessments DOI : https://doi.org/10.1016/j.seta.2021.101772
35.	Heat transfer and friction loss of flowing kenaf core non‑wood pulp fibre suspensions to curb reject papers 2022 Author(s) : Kazi Md. Salim Newaz Source : HEAT AND MASS TRANSFER DOI : https://doi.org/10.1007/s00231-022-03281-4
36.	Experimental and Theoretical Analysis of Energy Efficiency in a Flat Plate Solar Collector Using Monolayer Graphene Nanofluids 2021 Author(s) : Kazi Md. Salim Newaz Source : SUSTAINABILITY DOI : https://doi.org/10.3390/su13105416
37.	Experimental investigations of the performance of a ﬂat-plate solar collector using carbon and metal oxides based nanoﬂuids 2021 Author(s) : Kazi Md. Salim Newaz Source : ENERGY JOURNAL DOI : https://doi.org/10.1016/j.energy.2021.120452
38.	Experimental Evaluation and Numerical Verification of Enhanced Heat Transportation by using Ultrasonic assisted Nanofluids in a closed Horizontal circular passage. 2021 Author(s) : Kazi Md. Salim Newaz Source : Case Studies in Thermal Engineering
39.	Effects of binary hybrid nanofluid on heat transfer and fluid flow in a triangular-corrugated channel: An experimental and numerical study 2021 Author(s) : Kazi Md. Salim Newaz Source : POWDER TECHNOLOGY
40.	Experimental evaluation and numerical verification of enhanced heat transportation by using ultrasonic assisted nanofluids in a closed horizontal circular passage 2021 Author(s) : Kazi Md. Salim Newaz, Muhammad Shakeel Ahmad Source : CASE STUDIES IN THERMAL ENGINEERING
41.	Experimental and Theoretical Analysis of Energy Efficiency in a Flat Plate Solar Collector Using Monolayer Graphene Nanofluids 2021 Author(s) : Kazi Md. Salim Newaz Source : SUSTAINABILITY DOI : 10.3390/su13105416
42.	Energy, exergy and economic analysis of liquid flat-plate solar collector using green covalent functionalized graphene nanoplatelets 2021 Author(s) : Masjuki Bin Haji Hassan, Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz Source : APPLIED THERMAL ENGINEERING DOI : 10.1016/j.applthermaleng.2021.116916
43.	Heat transfer growth of sonochemically synthesized novel mixed metal oxide ZnO+Al2O3+TiO2/DW based ternary hybrid nanofluids in a square flow conduit 2021 Author(s) : Mohd Rafie Bin Johan, Kazi Md. Salim Newaz, Zaira Zaman Chowdhury, Muhammad Shakeel Ahmad Source : RENEWABLE & SUSTAINABLE ENERGY REVIEWS DOI : 10.1016/j.rser.2021.111025
44.	An experimental investigation of eco-friendly treated GNP heat transfer growth: circular and square conduit comparison 2021 Author(s) : Ahmad Badarudin Bin Mohamad Badry, Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY DOI : 10.1007/s10973-020-09652-5
45.	One‑pot sonochemical synthesis route for the synthesis of ZnO@TiO2/ DW hybrid/composite nanofuid for enhancement of heat transfer in a square heat exchanger 2021 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
46.	Experimental investigations of the performance of a flat-plate solar collector using carbon and metal oxides based nanofluids 2021 Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz, Mohd Ridha Bin Muhamad @ Mohd Ata'illah Source : ENERGY DOI : 10.1016/j.energy.2021.120452
47.	Evaluation on Enhanced Heat Transfer Using Sonochemically Synthesized Stable Zno-Eg@Dw Nanofluids in Horizontal Calibrated Circular Flow Passage 2021 Author(s) : Mohd Rafie Bin Johan, Kazi Md. Salim Newaz, Zaira Zaman Chowdhury Source : ENERGIES DOI : 10.3390/en14092400
48.	Nano fl uids for fl at plate solar collectors: Fundamentals and applications 2021 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF CLEANER PRODUCTION DOI : 10.1016/j.jclepro.2020.125725
49.	Ultrasonic assisted new Al2O3@TiO2-ZnO/DW ternary composites nanofluids for enhanced energy transportation in a closed horizontal circular flow passage 2021 Author(s) : Mohd Rafie Bin Johan, Kazi Md. Salim Newaz, Zaira Zaman Chowdhury Source : INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER DOI : 10.1016/j.icheatmasstransfer.2020.105018
50.	Graphene Nanoplatelets Suspended in Different Basefluids Based Solar Collector: An Experimental and Analytical Study 2021 Author(s) : Kazi Md. Salim Newaz Source : PROCESSES DOI : 10.3390/pr9020302
51.	Characteristics investigation on heat transfer growth of sonochemically synthesized ZnO-DW based nanofluids inside square heat exchanger 2021 Author(s) : Mohd Rafie Bin Johan, Kazi Md. Salim Newaz, Zaira Zaman Chowdhury, Oon Cheen Sean Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY DOI : 10.1007/s10973-020-09593-z
52.	Experimental investigation of convective heat transfer growth on ZnO@TiO2/DW binary composites/hybrid nanofluids in a circular heat exchanger 2021 Author(s) : Mohd Rafie Bin Johan, Kazi Md. Salim Newaz, Zaira Zaman Chowdhury, Oon Cheen Sean Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY DOI : 10.1007/s10973-020-09363-x
53.	Graphene Nanoplatelets Suspended in Different Basefluids Based Solar Collector: An Experimental and Analytical Study 2021 Author(s) : Kazi Md. Salim Newaz Source : PROCESSES
54.	An experimental investigation of eco‑friendly treated GNP heat transfer growth: circular and square conduit comparison 2021 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
55.	One-pot sonochemical synthesis route for the synthesis of ZnO@TiO2/DW hybrid/composite nanofluid for enhancement of heat transfer in a square heat exchanger 2021 Author(s) : Mohd Rafie Bin Johan, Kazi Md. Salim Newaz, Zaira Zaman Chowdhury Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY DOI : 10.1007/s10973-020-09362-y
56.	Thermal performance evaluation for alumina coated MWCNTs composite nanofluid in annular passage of various eccentricities 2021 Author(s) : Nukman Bin Yusoff, Kazi Md. Salim Newaz Source : POWDER TECHNOLOGY DOI : 10.1016/j.powtec.2021.06.005
57.	Heat transfer and pressure drop characteristics of two phase flow in helical coils 2021 Author(s) : Kazi Md. Salim Newaz Source : THERMAL SCIENCE AND ENGINEERING PROGRESS
58.	Experimental investigations of the performance of a flat-plate solar collector using carbon and metal oxides based nanofluids 2021 Author(s) : Kazi Md. Salim Newaz Source : Energy DOI : https://doi.org/10.1016/j.energy.2021.120452
59.	Characteristics investigation on heat transfer growth of sonochemically synthesized ZnO-DW based nanofluids inside square heat exchanger. 2021 Author(s) : Kazi Md. Salim Newaz Source : Journal of Thermal Analysis and Calorimetry DOI : https://doi.org/10.1007/s10973-020-09593-z
60.	Energy, exergy and economic analysis of liquid flat-plate solar collector using green covalent functionalized graphene nanoplatelets. 2021 Author(s) : Kazi Md. Salim Newaz Source : Applied Thermal Engineering DOI : https://doi.org/10.1016/j.applthermaleng.2021.116916
61.	Numerical simulation of the efect of chimney confguration on the performance of a solar chimney power plant 2021 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY DOI : doi.org/10.1007/s10973-021-10567-y
62.	Polyaniline/graphene oxide/Zn-doped TiO2 nanocomposite coatings for the corrosion protection of carbon steel. 2021 Author(s) : Kazi Md. Salim Newaz Source : Journal of Adhesion Science and Technology DOI : https://doi.org/10.1080/01694243.2021.1892414
63.	Heat transfer growth of sonochemically synthesized novel mixed metal oxide ZnO+ Al2O3+ TiO2/DW based ternary hybrid nanofluids in a square flow conduit. 2021 Author(s) : Kazi Md. Salim Newaz Source : Renewable and Sustainable Energy Reviews DOI : https://doi.org/10.1016/j.rser.2021.111025
64.	Experimental investigation of convective heat transfer growth on ZnO@ TiO 2/DW binary composites/hybrid nanofluids in a circular heat exchanger. 2021 Author(s) : Kazi Md. Salim Newaz Source : Journal of Thermal Analysis and Calorimetry
65.	A review of recent advances in green nanofluids and their application in thermal systems 2021 Author(s) : Kazi Md. Salim Newaz Source : CHEMICAL ENGINEERING JOURNAL
66.	Thermal performance evaluation for alumina coated MWCNTs composite nanofluid in annular passage of various eccentricities 2021 Author(s) : Nukman Bin Yusoff, Kazi Md. Salim Newaz Source : Powder Technology
67.	Fouling and fouling mitigation of mineral salt using bio-based functionalized graphene nano-plates 2021 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
68.	Experimental study on the effect of bio-functionalized graphene nanoplatelets on the thermal performance of liquid flat plate solar collector. 2021 Author(s) : Kazi Md. Salim Newaz Source : Journal of Thermal Analysis and Calorimetry,
69.	Ultrasonic assisted new Al2O3@ TiO2-ZnO/DW ternary composites nanofluids for enhanced energy transportation in a closed horizontal circular flow passage. 2021 Author(s) : Kazi Md. Salim Newaz Source : International Communications in Heat and Mass Transfer DOI : https://doi.org/10.1016/j.icheatmasstransfer.2020.105018
70.	Evaluation on Enhanced Heat Transfer Using Sonochemically Synthesized Stable Zno-Eg@ Dw Nanofluids in Horizontal Calibrated Circular Flow Passage. 2021 Author(s) : Kazi Md. Salim Newaz Source : Energies
71.	Polyaniline/graphene oxide/Zn-doped TiO2 nanocomposite coatings for the corrosion protection of carbon steel 2021 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
72.	Experimental study on the effect of bio-functionalized graphene nanoplatelets on the thermal performance of liquid flat plate solar collector 2021 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
73.	Heat transfer and fouling deposition investigation on the titanium coated heat exchanger surface 2020 Author(s) : Kazi Md. Salim Newaz Source : POWDER TECHNOLOGY DOI : 10.1016/j.powtec.2020.07.010
74.	Covalently functionalized pentaethylene glycol-thermally treated graphene towards enhanced thermophysical and heat transfer characteristics 2020 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
75.	EFFECT OF FLOW SEPARATION OF TiO2 NANOFLUID ON HEAT TRANSFER IN THE ANNULAR SPACE OF TWO CONCENTRIC CYLINDERS 2020 Author(s) : Kazi Md. Salim Newaz Source : THERMAL SCIENCE
76.	Thermal performance of a flat-plate solar collector using aqueous colloidal dispersions of graphene nanoplatelets with different specific surface areas 2020 Author(s) : Kazi Md. Salim Newaz Source : Applied Thermal Engineering DOI : https://doi.org/10.1016/j.applthermaleng.2020.115142
77.	A comprehensive review on nanofluid operated solar flat plate collectors 2020 Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz, Mohd Ridha Bin Muhamad @ Mohd Ata'illah Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY DOI : 10.1007/s10973-019-08514-z
78.	Effect of saturation temperature and vapor quality on the boiling heat transfer and critical heat flux in a micro channel 2020 Author(s) : Kazi Md. Salim Newaz Source : International Communications in Heat and Mass Transfer DOI : 10.1016/j.icheatmasstransfer.2020.104768
79.	Experimental investigation of convective heat transfer growth on ZnO@TiO2/DW binary composites/hybrid nanofluids in a circular heat exchanger. 2020 Author(s) : Zaira Zaman Chowdhury, Kazi Md. Salim Newaz Source : Journal of Thermal Analysis and Calorimetry DOI : doi.org/10.1007/s10973-020-09363-x
80.	Single phase flow heat transfer characteristics of quad-channel twisted tape inserts in tubes 2020 Author(s) : Kazi Md. Salim Newaz Source : INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER DOI : 10.1016/j.icheatmasstransfer.2020.104835
81.	An innovative, high-efficiency silver/silica nanocomposites for direct absorption concentrating solar thermal power 2020 Author(s) : Ahmad Badarudin Bin Mohamad Badry, Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz Source : INTERNATIONAL JOURNAL OF ENERGY RESEARCH DOI : 10.1002/er.4994
82.	Effect of saturation temperature and vapor quality on the boiling heat transfer and critical heat flux in a microchannel 2020 Author(s) : Kazi Md. Salim Newaz Source : INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER DOI : 10.1016/j.icheatmasstransfer.2020.104768
83.	Heat transfer in turbulent nanofluids: Separation flow studies and development of novel correlations 2020 Author(s) : Ahmad Badarudin Bin Mohamad Badry, Kazi Md. Salim Newaz, Zaira Zaman Chowdhury, Mohd Ridha Bin Muhamad @ Mohd Ata'illah, Houman Yarmand Source : ADVANCED POWDER TECHNOLOGY DOI : 10.1016/j.apt.2020.06.001
84.	Ultrasonic assisted new Al2O3@ TiO2-ZnO/DW ternary composites nanofluids for enhanced energy transportation in a closed horizontal circular flow passage 2020 Author(s) : Kazi Md. Salim Newaz Source : International Communications in Heat and Mass Transfer
85.	Fouling and fouling mitigation of calcium compounds on heat exchangers by novel colloids and surface modifications 2020 Author(s) : Kazi Md. Salim Newaz Source : REVIEWS IN CHEMICAL ENGINEERING DOI : 10.1515/revce-2017-0076
86.	Nanofluids for Flat Plate Solar Collectors: Fundamentals and Applications. 2020 Author(s) : Kazi Md. Salim Newaz Source : Journal of Cleaner Production DOI : https://doi.org/10.1016/j.jclepro.2020.125725
87.	Solar chimney power plant and its correlation with ambient wind effect 2020 Author(s) : Saad Mekhilef, Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY DOI : 10.1007/s10973-019-09065-z
88.	The Effects of Hydrophobicity and Drainage Velocity on Water Retention Behaviour in Porous Media: A Computational Study 2020 Author(s) : Kazi Md. Salim Newaz Source : International Journal of Air-Conditioning and Refrigeration
89.	An innovative approach for conducting experimental modal analysis (EMA) in running harmonic for structural modal identification 2020 Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz Source : MEASUREMENT DOI : 10.1016/j.measurement.2020.107795
90.	Effect of ZnO-water based nanofluids from sonochemical synthesis method on heat transfer in a circular flow passage 2020 Author(s) : Mohd Rafie Bin Johan, Kazi Md. Salim Newaz, Zaira Zaman Chowdhury Source : INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER DOI : 10.1016/j.icheatmasstransfer.2020.104591
91.	Thermal performance of a flat-plate solar collector using aqueous colloidal dispersions of graphene nanoplatelets with different specific surface areas 2020 Author(s) : Ahmad Badarudin Bin Mohamad Badry, Kazi Md. Salim Newaz Source : APPLIED THERMAL ENGINEERING
92.	Experimental investigation on drag reduction of flowing crop suspensions of the pulp fibers in circular pipe heat exchanger 2020 Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz, Mahidzal Bin Dahari, Tuan Zaharinie Binti Tuan Zahari Source : PARTICULATE SCIENCE AND TECHNOLOGY DOI : 10.1080/02726351.2018.1564093
93.	Turbulent heat transfer and nanofluid flow in an annular cylinder with sudden reduction 2020 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY DOI : 10.1007/s10973-020-09538-6
94.	Heat transfer and pressure drop investigation through pipe with different shapes using different types of nanofluids 2020 Author(s) : Nukman Bin Yusoff, Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
95.	Experimental investigation on drag reduction of flowing crop suspensions of the pulp fibers in circular pipe heat exchanger 2020 Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz, Mahidzal Bin Dahari, Tuan Zaharinie Binti Tuan Zahari Source : PARTICULATE SCIENCE AND TECHNOLOGY DOI : 10.1080/02726351.2018.1564093
96.	Heat transfer and fouling deposition investigation on the titanium coated heat exchanger surface 2020 Author(s) : Kazi Md. Salim Newaz Source : Powder Technology DOI : 10.1016/j.powtec.2020.07.010
97.	An innovative approach for conducting experimental modal analysis (EMA) in running harmonic for structural modal identification 2020 Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz Source : MEASUREMENT DOI : 10.1016/j.measurement.2020.107795
98.	Metal cutting lubricants and cutting tools: a review on the performance improvement and sustainability assessment 2020 Author(s) : Kazi Md. Salim Newaz, Nukman Bin Yusoff Source : The International Journal of Advanced Manufacturing Technology DOI : 10.1007/s00170-019-04890-w
99.	Characteristics investigation on heat transfer growth of sonochemically synthesized ZnO-DW based nanofluids inside square heat exchanger 2020 Author(s) : Kazi Md. Salim Newaz Source : Journal of Thermal Analysis and Calorimetry DOI : https://doi.org/10.1007/s10973-020-09593-z
100.	One-pot sonochemical synthesis route for the synthesis of ZnO@ TiO 2/DW hybrid/composite nanofluid for enhancement of heat transfer in a square heat exchanger 2020 Author(s) : Kazi Md. Salim Newaz Source : Journal of Thermal Analysis and Calorimetry DOI : https://doi.org/10.1007/s10973-020-09362-y
101.	Effect of ZnO-water based nanofluids from sonochemical synthesis method on heat transfer in a circular flow passage 2020 Author(s) : Zaira Zaman Chowdhury, Kazi Md. Salim Newaz Source : International Communications in Heat and Mass Transfer DOI : https://doi.org/10.1016/j.icheatmasstransfer.2020.104591
102.	Fouling and fouling mitigation of mineral salt using bio-based functionalized graphene nano-plates 2020 Author(s) : Kazi Md. Salim Newaz Source : Journal of Thermal Analysis and Calorimetry DOI : 10.1007/s10973-020-09940-0
103.	Thermal performance of a Flat-plate solar collector using aqueous colloidal dispersion of graphene nanoplatelets with different specific surface areas 2020 Author(s) : Kazi Md. Salim Newaz Source : Applied Thermal Engineering
104.	Turbulent heat transfer and nanofluid flow in an annular cylinder with sudden reduction 2020 Author(s) : Kazi Md. Salim Newaz Source : Journal of Thermal Analysis and Calorimetry DOI : https://doi.org/10.1007/s10973-020-09538-6
105.	Metal cutting lubricants and cutting tools: a review on the performance improvement and sustainability assessment 2020 Author(s) : Imtiaz Ahmed Choudhury, Nukman Bin Yusoff, Kazi Md. Salim Newaz Source : INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
106.	Effect of temperature on synthesis of cellulose nanoparticles via ionic liquid hydrolysis process 2020 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF MOLECULAR LIQUIDS
107.	An experimental investigation of eco-friendly treated GNP heat transfer growth: circular and square conduit comparison 2020 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY DOI : https://doi.org/10.1007/s10973-020-09652-5
108.	An innovative approach for conducting experimental modal analysis (EMA) in running harmonic for structural modal identification 2020 Author(s) : Kazi Md. Salim Newaz, Mohd Nashrul Bin Mohd Zubir Source : Measurement
109.	Thermal efficiency of a flat-plate solar collector filled with Pentaethylene Glycol-Treated Graphene Nanoplatelets: An experimental analysis 2019 Author(s) : Kazi Md. Salim Newaz Source : SOLAR ENERGY
110.	Heat transfer and pressure drop investigation through pipe with different shapes using different types of nanofluids. 2019 Author(s) : Kazi Md. Salim Newaz Source : Journal of Thermal Analysis and Calorimetry
111.	A comprehensive review on nanofluid operated solar flat plate collectors 2019 Author(s) : Kazi Md. Salim Newaz, Mohd Nashrul Bin Mohd Zubir Source : Journal of Thermal Analysis and Calorimetry
112.	Thermophysical properties and stability of carbon nanostructures and metallic oxides nanofluids: Experimental approach 2019 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
113.	Solar chimney power plant and its correlation with ambient wind effect 2019 Author(s) : Saad Mekhilef, Kazi Md. Salim Newaz Source : Journal of Thermal Analysis and Calorimetry, DOI : doi.org/10.1007/s10973-019-09065-z
114.	TOWARD IMPROVED HEAT DISSIPATION OF THE TURBULENT REGIME OVER BACKWARD-FACING STEP FOR THE Al<sub>2</sub>O<sub>3</sub>-WATER NANOFLUIDS: An Experimental Approach 2019 Author(s) : Mohd Nashrul Bin Mohd Zubir, Mohamad Sofian Bin Abu Talip, Suriani Binti Ibrahim, Kazi Md. Salim Newaz, Mahidzal Bin Dahari, Zaira Zaman Chowdhury Source : THERMAL SCIENCE DOI : 10.2298/TSCI170606236A
115.	Fouling and fouling mitigation of calcium compounds on heat exchangers by novel colloids and surface modifications 2019 Author(s) : Kazi Md. Salim Newaz Source : Reviews in Chemical Engineering DOI : https://doi.org/10.1515/revce-2017-0076
116.	TOWARD IMPROVED HEAT DISSIPATION OF THE TURBULENT REGIME OVER BACKWARD-FACING STEP FOR THE Al2O3-WATER NANOFLUIDS: An Experimental Approach 2019 Author(s) : Mohd Nashrul Bin Mohd Zubir, Mohamad Sofian Bin Abu Talip, Suriani Binti Ibrahim, Kazi Md. Salim Newaz, Mahidzal Bin Dahari, Zaira Zaman Chowdhury Source : THERMAL SCIENCE
117.	Computational Modelling of Droplet Dynamics Behaviour in Polymer Electrolyte Membrane Fuel Cells: A Review 2019 Author(s) : Kazi Md. Salim Newaz, Poo Balan A/l Ganesan Source : Journal of Electrochemical Science and Technology DOI : 10.33961/jecst.2019.00262
118.	An experimental investigation on the performance of a flat-plate solar collector using eco-friendly treated graphene nanoplatelets water nanofluids 2019 Author(s) : Goh Boon Tong, Kazi Md. Salim Newaz Source : Journal of Thermal Analysis and Calorimetry DOI : 10.1007/s1097
119.	Thermal efficiency of a flat-plate solar collector filled with Pentaethylene Glycol-Treated Graphene Nanoplatelets: An experimental analysis. 2019 Author(s) : Kazi Md. Salim Newaz Source : Solar Energy
120.	Graphene nanoplatelets and few-layer graphene studies in thermo-physical properties and particle characterization 2019 Author(s) : Kazi Md. Salim Newaz Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
121.	Experimental investigation on drag reduction of flowing crop suspensions of the pulp fibers in circular pipe heat exchanger 2019 Author(s) : Kazi Md. Salim Newaz Source : Particulate Science and Technology
122.	Covalently functionalized pentaethylene glycol-thermally treated graphene towards enhanced thermophysical and heat transfer characteristics 2019 Author(s) : Kazi Md. Salim Newaz Source : Journal of Thermal Analysis and Calorimetry
123.	Thermophysical properties and stability of carbon nanostructures and metallic oxides nanofluids, Experimental approach 2019 Author(s) : Kazi Md. Salim Newaz Source : Journal of Thermal Analysis and Calorimetry
124.	Graphene nanoplatelets and few-layer graphene studies in thermo-physical properties and particle characterization 2019 Author(s) : Kazi Md. Salim Newaz Source : Journal of Thermal Analysis and Calorimetry
125.	An experimental investigation on the performance of a flat-plate solar collector using eco-friendly treated graphene nanoplatelets-water nanofluids 2019 Author(s) : Goh Boon Tong, Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz, Mohd Ridha Bin Muhamad @ Mohd Ata'illah, Rad Sadri Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY DOI : 10.1007/s10973-019-08153-4
126.	Plasmonic nanofluids for high photothermal conversion efficiency in direct absorption solar collectors: Fundamentals and applications 2019 Author(s) : Ahmad Badarudin Bin Mohamad Badry, Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz Source : SOLAR ENERGY MATERIALS AND SOLAR CELLS DOI : 10.1016/j.solmat.2019.110084
127.	Heat transfer and pressure drop investigation through pipe with different shapes using different types of nanofluids 2019 Author(s) : Oon Cheen Sean, Kazi Md. Salim Newaz, Nukman Bin Yusoff Source : Journal of Thermal Analysis and Calorimetry
128.	Computational Modelling of Droplet Dynamics Behaviour in Polymer Electrolyte Membrane Fuel Cells: A Review 2019 Author(s) : Kazi Md. Salim Newaz, Poo Balan A/l Ganesan, Ramesh Singh A/l Kuldip Singh Source : JOURNAL OF ELECTROCHEMICAL SCIENCE AND TECHNOLOGY
129.	Effect of Temperature on the Physical, Electro-Chemical and Adsorption Properties of Carbon Micro-Spheres Using Hydrothermal Carbonization Process 2018 Author(s) : Nor Aliya Binti Hamizi, Zaira Zaman Chowdhury, Mohd Rafie Bin Johan, Yasmin Binti Abdul Wahab, Kazi Md. Salim Newaz, Yarub Kahtan Abdul-rahman Al-douri Source : Nanomaterials DOI : 10.3390/nano8080597
130.	A brief review study of flow phenomena over a backward-facing step and its optimization 2018 Author(s) : Kazi Md. Salim Newaz Source : Renewable and Sustainable Energy Reviews
131.	Graphene nanoplatelets and few-layer graphene studies in thermophysical properties and particle characterization 2018 Author(s) : Kazi Md. Salim Newaz Source : Journal of Thermal Analysis and Calorimetry,
132.	Blended morphologies of plasmonic nano fluids for direct absorption applications 2018 Author(s) : Kazi Md. Salim Newaz Source : Applied Energy DOI : https://doi.org/10.1016/j.apenergy.2018.07.113
133.	Corrosion Inhibition Performance and Adsorption Mechanism of Novel Quinazoline Schiff Base on Low Alloy Steel in HCl Media 2018 Author(s) : Kazi Md. Salim Newaz, Wan Jefrey Basirun Source : INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE DOI : 10.20964/2018.12.40
134.	The effect of nanocrystalline cellulose on flow properties of fiber crop aqueous suspension 2018 Author(s) : Kazi Md. Salim Newaz Source : Carbohydrate Polymers
135.	Investigation on the feasibility of eliminating harmonic excitation signal en-route to performing experimental modal analysis (EMA) under operational condition 2018 Author(s) : Kazi Md. Salim Newaz Source : Journal of Mechanical Science and Technology
136.	Numerical study of turbulent heat transfer of nanofluids containing ecofriendly treated carbon nanotubes through a concentric annular heat exchanger 2018 Author(s) : Kazi Md. Salim Newaz Source : International Journal of Heat and Mass Transfer DOI : 10.1016/j.ijheatmasstransfer.2018.08.040
137.	INCREASE IN CONVECTIVE HEAT TRANSFER OVER A BACKWARD FACING STEP IMMERSED IN A WATER-BASED TiO2 NANOFLUID 2018 Author(s) : Kazi Md. Salim Newaz Source : Heat Transfer Research DOI : DOI: 10.1615/HeatTransRes.2018017043
138.	A new approach to evaluate the impact of thermophysical properties of nanofluids on heat transfer and pressure drop 2018 Author(s) : Kazi Md. Salim Newaz, Nukman Bin Yusoff Source : International Communications in Heat and Mass Transfer DOI : https://doi.org/10.1016/j.icheatmasstransfer.2018.05.002
139.	Development of a new density correlation for carbon-based nanofluids using response surface methodology 2018 Author(s) : Kazi Md. Salim Newaz Source : Journal of Thermal Analysis and Calorimetry
140.	Sliding Behavior of Droplet on a Hydrophobic Surface with Hydrophilic Cavities: A Simulation Study 2018 Author(s) : Kazi Md. Salim Newaz Source : Physics of Fluids
141.	Design and implementation of a non-invasive real-time microwave sensor for assessing water hardness in heat exchangers 2018 Author(s) : Kazi Md. Salim Newaz Source : Journal of Electromagnetic Waves and Applications
142.	Effect of various refining processes for Kenaf Bast non-wood pulp fibers suspensions on heat transfer coefficient in circular pipe heat exchanger 2018 Author(s) : Kazi Md. Salim Newaz Source : Heat and Mass Transfer
143.	Thermal conductivity and viscosity models of metallic oxides nanofluids. 2018 Author(s) : Kazi Md. Salim Newaz Source : International Journal of Heat and Mass Transfer
144.	An experimental study of PCM based finned and un-finned heat sinks for passive cooling of electronics. 2018 Author(s) : Kazi Md. Salim Newaz Source : Heat and Mass Transfer
145.	Convective heat transfer growth over a backward-facing step using water-based TiO2 2018 Author(s) : Kazi Md. Salim Newaz Source : Heat Transfer Research
146.	CFD modeling of turbulent convection heat transfer of nanofluids containing green functionalized graphene nanoplatelets flowing in a horizontal tube: Comparison with experimental data. 2018 Author(s) : Nur Adura Binti Yaakup, Kazi Md. Salim Newaz Source : Journal of Molecular Liquids DOI : 10.1016/j.molliq.2018.06.011
147.	An experimental study of PCM based finned and un-finned heat sinks for passive cooling of electronics 2018 Author(s) : Kazi Md. Salim Newaz Source : HEAT AND MASS TRANSFER
148.	Corrosion Inhibition Performance and Adsorption Mechanism of Novel Quinazoline Schiff Base on Low Alloy Steel in HCl Media 2018 Author(s) : Wan Jefrey Basirun, Kazi Md. Salim Newaz Source : INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE
149.	A new approach to evaluate the impact of thermophysical properties of nanofluids on heat transfer and pressure drop 2018 Author(s) : Nukman Bin Yusoff, Kazi Md. Salim Newaz Source : INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
150.	A facile, bio-based, novel approach for synthesis of covalently functionalized graphene nanoplatelet nano-coolants toward improved thermo-physical and heat transfer properties 2018 Author(s) : Roslina Binti Ahmad, Nor Ishida Binti Zainal Abidin, Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz Source : JOURNAL OF COLLOID AND INTERFACE SCIENCE DOI : 10.1016/j.jcis.2017.07.052
151.	A brief review study of flow phenomena over a backward-facing step and its optimization 2018 Author(s) : Ahmad Badarudin Bin Mohamad Badry, Kazi Md. Salim Newaz, Mohd Ridha Bin Muhamad @ Mohd Ata'illah, Houman Yarmand Source : RENEWABLE SUSTAINABLE ENERGY REVIEWS
152.	Blended morphologies of plasmonic nanofluids for direct absorption applications 2018 Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz Source : APPLIED ENERGY DOI : 10.1016/j.apenergy.2018.07.113
153.	Effect of various refining processes for Kenaf Bast non-wood pulp fibers suspensions on heat transfer coefficient in circular pipe heat exchanger 2018 Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz, Mahidzal Bin Dahari, Mohd Sayuti Bin Ab Karim Source : HEAT AND MASS TRANSFER DOI : 10.1007/s00231-017-2176-3
154.	Effect of various refining processes for Kenaf Bast non-wood pulp fibers suspensions on heat transfer coefficient in circular pipe heat exchanger (vol 54, pg 875, 2018) 2018 Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz, Mahidzal Bin Dahari, Mohd Sayuti Bin Ab Karim Source : HEAT AND MASS TRANSFER DOI : 10.1007/s00231-017-2211-4
155.	Investigation on the feasibility of eliminating harmonic excitation signal en-route to performing experimental modal analysis (EMA) under operational condition 2018 Author(s) : Norhafizan Bin Ahmad, Mohd Nashrul Bin Mohd Zubir, Nurin Wahidah Binti Mohd Zulkifli, Kazi Md. Salim Newaz Source : JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY DOI : 10.1007/s12206-018-0604-z
156.	Numerical study of turbulent heat transfer of nanofluids containing eco-friendly treated carbon nanotubes through a concentric annular heat exchanger 2018 Author(s) : Nukman Bin Yusoff, Shaifulazuar Bin Rozali, Chew Bee Teng, Kazi Md. Salim Newaz Source : INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
157.	Thermal conductivity and viscosity models of metallic oxides nanofluids 2018 Author(s) : Kazi Md. Salim Newaz Source : INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
158.	Experimental study on heat transfer and thermo-physical properties of covalently functionalized carbon nanotubes nanofluids in an annular heat exchanger: A green and novel synthesis 2017 Author(s) : Samira Bagheri, Kazi Md. Salim Newaz, Tuan Zaharinie Binti Tuan Zahari Source : Energy & Fuels
159.	Development of a new driving impact system to be used in experimental modal analysis (EMA) under operational condition 2017 Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz Source : Sensors and Actuators A: Physical. DOI : http://dx.doi.org/10.1016/j.sna.2017.07.010
160.	Study of environmentally friendly and facile functionalization of graphene nanoplatelet and its application in convective heat transfer 2017 Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz Source : Energy Conversion and Management DOI : https://doi.org/10.1016/j.enconman.2017.07.036
161.	Calcium carbonate fouling on double-pipe heat exchanger with different heat exchanging surfaces 2017 Author(s) : Kazi Md. Salim Newaz Source : Powder Technology
162.	Synthesis, stability, and thermophysical properties of aqueous colloidal dispersions of multi-walled carbon nanotubes treated with beta-alanine. 2017 Author(s) : Kazi Md. Salim Newaz Source : International Communications in Heat and Mass Transfer
163.	Turbulent heat transfer to separation nanofluid flow in annular concentric pipe 2017 Author(s) : Kazi Md. Salim Newaz Source : International Journal of Thermal Sciences
164.	A bio-based, facile approach for the preparation of covalently functionalized carbon nanotubes aqueous suspensions and their potential as heat transfer fluids 2017 Author(s) : Samira Bagheri, Kazi Md. Salim Newaz, Tuan Zaharinie Binti Tuan Zahari, Ahmad Badarudin Bin Mohamad Badry, Mohd Nashrul Bin Mohd Zubir Source : Journal of Colloid and Interface Science
165.	Functionalization and exfoliation of graphite into mono layer graphene for improved heat dissipation 2017 Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz Source : Journal of the Taiwan Institute of Chemical Engineers DOI : 10.1016/j.jtice.2016.12.009
166.	Convective heat transfer enhancement with graphene nanoplatelet/platinum hybrid nanofluid 2017 Author(s) : Kazi Md. Salim Newaz Source : International Communications in Heat and Mass Transfer
167.	Facile, Environmentally Friendly, Cost Effective and Scalable Production of Few-Layered Graphene 2017 Author(s) : Mohd Nashrul Bin Mohd Zubir, Shaifulazuar Bin Rozali, Kazi Md. Salim Newaz Source : Chemical Engineering Journal
168.	Experimental investigation on rheological, momentum and heat transfer characteristics of flowing fiber crop suspensions 2017 Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz Source : INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
169.	A novel, eco-friendly technique for covalent functionalization of graphene nanoplatelets and the potential of their nanofluids for heat transfer applications 2017 Author(s) : Samira Bagheri, Kazi Md. Salim Newaz Source : Chemical Physics Letters
170.	A facile, bio-based, novel approach for synthesis of covalently functionalized graphene nanoplatelet nano-coolants toward improved thermo-physical and heat transfer properties 2017 Author(s) : Kazi Md. Salim Newaz Source : Journal of Colloid and Interface Science
171.	Experimental study on thermo-physical and rheological properties of stable and green reduced graphene oxide nanofluids: Hydrothermal assisted technique 2017 Author(s) : Kazi Md. Salim Newaz Source : Journal of Dispersion Science and Technology
172.	Electrochemical investigation on the corrosion inhibition of mild steel by Quinazoline Schiff base compounds in hydrochloric acid solution 2017 Author(s) : Kazi Md. Salim Newaz, Wan Jefrey Basirun Source : JOURNAL OF COLLOID AND INTERFACE SCIENCE
173.	Corrosion protection of AISI 1018 steel using Co-doped TiO 2/polypyrrole nanocomposites in 3.5% NaCl solution 2017 Author(s) : Kazi Md. Salim Newaz Source : Materials Chemistry and Physics
174.	Retardation of heat exchanger surfaces mineral fouling by water-based diethylenetriamine pentaacetate-treated CNT nanofluids 2017 Author(s) : Lai Sai Hin Source : Applied Thermal Engineering
175.	A survey on experimental and numerical studies of convection heat transfer of nanofluids inside closed conduits 2016 Author(s) : Kazi Md. Salim Newaz Source : Advances in Mechanical Engineering
176.	Experimental investigation of thermophysical properties and heat transfer rate of covalently functionalized MWCNT in an annular heat exchanger 2016 Author(s) : Chew Bee Teng, Kazi Md. Salim Newaz Source : International Communications in Heat and Mass Transfer
177.	Hydrodynamic and thermal performance prediction of 5 functionalized MWNT-based water nanofluids under laminar flow regime using the adaptive neuro-fuzzy inference system 2016 Author(s) : Kazi Md. Salim Newaz Source : NUMERICAL HEAT TRANSFER, PART A
178.	Experimental investigation on rheological, momentum and heat transfer characteristics of flowing fiber crop suspensions 2016 Author(s) : Kazi Md. Salim Newaz Source : International Communications in Heat and Mass Transfer DOI : https://doi.org/10.1016/j.icheatmasstransfer.2016.11.013
179.	Stability and thermophysical properties of water-based nanofluids containing triethanolamine-treated graphene nanoplatelets with different specific surface areas 2016 Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz Source : Colloids and Surfaces DOI : 10.1016/j.colsurfa.2016.04.016
180.	Investigation on the Use of Graphene Oxide as Novel Surfactant for Stabilizing Carbon Based Materials 2016 Author(s) : Kazi Md. Salim Newaz Source : Journal of Dispersion Science and Technology
181.	Heat transfer enhancement of water-based highly crumpled few-layer graphene nanofluids 2016 Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz Source : RSC Advances DOI : 10.1039/C6RA22365F
182.	Fouling mitigation on heat exchanger surfaces by EDTA-treated MWCNT-based water nanofluids 2016 Author(s) : Kazi Md. Salim Newaz, Chew Bee Teng Source : Journal of the Taiwan Institute of Chemical Engineers
183.	Experimental investigation of heat transfer performance and frictional loss of functionalized GNP-based water coolant in a closed conduit flow 2016 Author(s) : Kazi Md. Salim Newaz Source : RSC Advances
184.	Boundary layer flow and heat transfer of FMWCNT/water nanofluids over a flat plate 2016 Author(s) : Kazi Md. Salim Newaz Source : Fluids
185.	Comparative study on heat transfer enhancement and nanofluids flow over backward and forward facing steps 2016 Author(s) : Kazi Md. Salim Newaz Source : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
186.	Detection of the gas–liquid two-phase flow regimes using non-intrusive microwave cylindrical cavity sensor 2016 Author(s) : Kazi Md. Salim Newaz Source : Journal of Electromagnetic Waves and Applications
187.	Nanofluid based on activated hybrid of biomass carbon/graphene oxide: Synthesis, thermo-physical and electrical properties 2016 Author(s) : Kazi Md. Salim Newaz Source : International Communications in Heat and Mass Transfer
188.	Mitigation of heat exchanger fouling in industry using catalytic materials 2016 Author(s) : Kazi Md. Salim Newaz Source : Desalination and Water Treatment
189.	Experimental investigation of thermo-physical properties, convective heat transfer and pressure drop of functionalized graphene nanoplatelets aqueous nanofluid in a square heated pipe. 2016 Author(s) : Kazi Md. Salim Newaz Source : Energy Conversion and Management
190.	Optimization of a synthetic jet actuator for flow control around an airfoil 2016 Author(s) : Kazi Md. Salim Newaz Source : IOP Conference Series: Materials Science and Engineering
191.	Experimental investigation of the propylene glycol-treated graphene nanoplatelets for the enhancement of closed conduit turbulent convective heat transfer. 2016 Author(s) : Kazi Md. Salim Newaz Source : International Communications in Heat and Mass Transfer
192.	Performance evaluation of latent heat energy storage in horizontal shell-and-finned tube for solar application 2016 Author(s) : Ahmed Aly Diaa Mohammed Sarhan, Kazi Md. Salim Newaz Source : J Therm Anal Calorim
193.	Heat transfer performance of water-based tetrahydrofurfuryl polyethylene glycol-treated graphene nanoplatelet nanofluids 2016 Author(s) : Chew Bee Teng, Kazi Md. Salim Newaz Source : Rsc Advances
194.	Stability and thermophysical properties of non-covalently functionalized graphene nanoplatelets nanofluids. 2016 Author(s) : Kazi Md. Salim Newaz Source : Energy Conversion and Management
195.	Study of synthesis, stability and thermos-physical properties of graphene nanoplatelet/platinum hybrid nanofluid 2016 Author(s) : Kazi Md. Salim Newaz Source : International communications in heat and mass transfer
196.	Mass production of highly-porous graphene for high-performance supercapacitors 2016 Author(s) : Chew Bee Teng, Kazi Md. Salim Newaz Source : Scientific Reports
197.	Numerical simulation of heat transfer and separation Al 2 O 3/ nanofluid flow in concentric annular pipe 2016 Author(s) : Kazi Md. Salim Newaz Source : International Communications in Heat and Mass Transfer
198.	Performance evaluation of latent heat energy storage in horizontal shell-and-finned tube for solar application. 2016 Author(s) : Kazi Md. Salim Newaz Source : Journal of Thermal Analysis and Calorimetry
199.	Toward Improved Heat Transfer Performance of Annular Heat Exchangers with Water/Ethylene Glycol-Based Nanofluids Containing Graphene Nanoplatelets 2016 Author(s) : Ahmad Badarudin Bin Mohamad Badry, Kazi Md. Salim Newaz Source : Journal of Thermal Analysis and Calorimetry DOI : 10.1007/s10973-016-5663-8
200.	Heat transfer performance of closed conduit turbulent flow: Constant mean velocity and temperature do matter 2016 Author(s) : Kazi Md. Salim Newaz, Mohd Nashrul Bin Mohd Zubir Source : Journal of the Taiwan Institute of Chemical Engineers DOI : 10.1016/j.jtice.2016.04.013
201.	Toward improved engine performance with crumpled nitrogen-doped graphene based water–ethylene glycol coolant. 2016 Author(s) : Kazi Md. Salim Newaz Source : Chemical Engineering Journal
202.	Numerical Heat Transfer Performance of Water-Based Graphene Nanoplatelets 2016 Author(s) : Kazi Md. Salim Newaz Source : World Academy of Science, Engineering and Technology
203.	Backward-facing step heat transfer of the turbulent regime for functionalized graphene nanoplatelets based water–ethylene glycol nanofluids. 2016 Author(s) : Kazi Md. Salim Newaz Source : International Journal of Heat and Mass Transfer
204.	Numerical Study of Developing Laminar Forced Convection Flow of Water/CuO Nanofluid in a Circular Tube with a 180 Degrees Curve 2016 Author(s) : Kazi Md. Salim Newaz Source : International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering
205.	Optimization model of peach production relevant to input energies - Yield function in Chaharmahal va Bakhtiari province, Iran. 2016 Author(s) : Kazi Md. Salim Newaz Source : Energy
206.	Experimental study on a feasibility of using electromagnetic wave cylindrical cavity sensor to monitor the percentage of water fraction in a two phase system 2016 Author(s) : Ahmad Badarudin Bin Mohamad Badry, Kazi Md. Salim Newaz Source : Sensors and Actuators A: Physical
207.	Synthesis of aspartic acid-treated multi-walled carbon nanotubes based water coolant and experimental investigation of thermal and hydrodynamic properties in circular tube. 2015 Author(s) : Kazi Md. Salim Newaz Source : Energy Conversion and Management
208.	An experimental and numerical investigation of heat transfer enhancement for graphene nanoplatelets nanofluids in turbulent flow conditions 2015 Author(s) : Mohammad Mehrali, Kazi Md. Salim Newaz Source : International Journal of Heat and Mass Transfer
209.	In vitro and in vivo study of hazardous effects of Ag nanoparticles and Arginine-treated multi walled carbon nanotubes on blood cells: Application in hemodialysis membranes 2015 Author(s) : Kazi Md. Salim Newaz Source : Journal of Biomedical Materials Research Part A
210.	Effect of specific surface area on convective heat transfer of graphene nanoplatelet aqueous nanofluids 2015 Author(s) : Mohammad Mehrali, Kazi Md. Salim Newaz Source : Experimental Thermal and Fluid Science
211.	Transformer oil based hexylamine-multiwalled carbon nanotubes coolant with optimized electrical, thermal and rheological enhancements 2015 Author(s) : Kazi Md. Salim Newaz Source : Rsc Advances
212.	Performance dependence of thermosyphon on the functionalization approaches: An experimental study on thermo-physical properties of graphene nanoplatelet-based water nanofluids 2015 Author(s) : Kazi Md. Salim Newaz, Mahidzal Bin Dahari Source : Energy Conversion and Management
213.	Synthesis of aspartic acid-treated multi-walled carbon nanotubes based water coolant and experimental investigation of thermal and hydrodynamic properties in circular tube 2015 Author(s) : Kazi Md. Salim Newaz Source : Energy Conversion and Management
214.	Experimental and numerical investigation of thermophysical properties, heat transfer and pressure drop of covalent and noncovalent functionalized graphene nanoplatelet-based water nanofluids in an annular heat exchanger 2015 Author(s) : Kazi Md. Salim Newaz Source : International Communications in Heat and Mass Transfer
215.	A review of Safety, Health and Environmental (SHE) issues of solar energy system 2015 Author(s) : Kazi Md. Salim Newaz, Hazlie Bin Mokhlis Source : Renewable Sustainable Energy Reviews
216.	Thermal performance of nanofluid in ducts with double forward-facing steps 2015 Author(s) : Kazi Md. Salim Newaz Source : Journal of the Taiwan Institute of Chemical Engineers
217.	Graphene nanoplatelets silver hybrid nanofluids for enhanced heat transfer 2015 Author(s) : Kazi Md. Salim Newaz Source : Energy Conversion and Management
218.	Experimental investigation on the use of reduced graphene oxide and its hybrid complexes in improving closed conduit turbulent forced convective heat transfer. 2015 Author(s) : Kazi Md. Salim Newaz Source : Experimental Thermal and Fluid Science
219.	Study of mineral fouling mitigation on heat exchanger surface 2015 Author(s) : Kazi Md. Salim Newaz Source : Desalination
220.	Social acceptance of solar energy in Malaysia: users perspective. 2015 Author(s) : Kazi Md. Salim Newaz Source : Clean Technologies and Environmental Policy
221.	Fouling mitigation on heat exchanger surfaces by EDTA- treated MWCNT-based water nanofluids 2015 Author(s) : Kazi Md. Salim Newaz Source : Journal of the Taiwan Institute of Chemical Engineers
222.	Basic effects of pulp refining on fiber properties—A review 2015 Author(s) : Ahmad Badarudin Bin Mohamad Badry, Kazi Md. Salim Newaz Source : Carbohydrate Polymers
223.	A comprehensive review of thermo-physical properties and convective heat transfer to nanofluids 2015 Author(s) : Kazi Md. Salim Newaz Source : Energy
224.	Synthesis of polyethylene glycol-functionalized multi-walled carbon nanotubes with a microwaveassisted approach for improved heat dissipation 2015 Author(s) : Kazi Md. Salim Newaz Source : RSC Advances
225.	Highly dispersed reduced graphene oxide and its hybrid complexes as effective additives for improving thermophysical property of heat transfer fluid 2015 Author(s) : Kazi Md. Salim Newaz Source : International Journal of Heat and Mass Transfer
226.	Synthesis of ethylene glycol-treated Graphene Nanoplatelets with one-pot, microwave-assisted functionalization for use as a high performance engine coolant 2015 Author(s) : Kazi Md. Salim Newaz Source : Energy Conversion and Management
227.	Investigation on the use of graphene oxide as novel surfactant to stabilize weakly charged graphene nanoplatelets 2015 Author(s) : Mohammad Mehrali, Kazi Md. Salim Newaz Source : Nanoscale Research Letters
228.	A Comprehensive Review of Milk Fouling on Heated Surfaces 2015 Author(s) : Kazi Md. Salim Newaz, Mahidzal Bin Dahari Source : Critical Reviews in Food Science and Nutrition
229.	Experimental investigation of heat transfer performance and frictional loss of functionalized trimethylolpropanetris (polypropylene glycol, amine terminated) ether-treated graphene nanoplatelets in a closed conduit flow 2015 Author(s) : Kazi Md. Salim Newaz Source : Rsc Advances
230.	Experimental investigation on the use of highly charged nanoparticles to improve the stability of weakly charged colloidal system 2015 Author(s) : Misni Bin Misran, Ahmad Badarudin Bin Mohamad Badry, Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz Source : JOURNAL OF COLLOID AND INTERFACE SCIENCE DOI : 10.1016/j.jcis.2015.05.019
231.	A review of studies on using nanofluids in flat-plate solar collectors 2015 Author(s) : Kazi Md. Salim Newaz Source : Solar Energy
232.	Experimental investigation on the use of highly charged nanoparticles to improve the stability of weakly charged colloidal system 2015 Author(s) : Kazi Md. Salim Newaz Source : Journal of colloid and interface science
233.	Microwave-assisted direct coupling of graphene nanoplatelets withpoly ethylene glycol and 4- phenylazophenol molecules for preparingstable- colloidal system 2015 Author(s) : Kazi Md. Salim Newaz Source : Colloids and Surfaces A: Physicochemical and Engineering Aspects
234.	Performance evaluation of latent heat energy storage in horizontal shell-and-finned tube for solar application. 2015 Author(s) : Kazi Md. Salim Newaz Source : Journal of Thermal Anal Calorimetry
235.	Indoor Solar Thermal Energy Saving Time with Phase Change Material in a Horizontal Shell and Finned-Tube Heat Exchanger 2015 Author(s) : Kazi Md. Salim Newaz Source : The Scientific World Journal
236.	Cadmium ion sorption from aqueous solutions by high surface area ethylenediaminetetraacetic acid and diethylene triamine pentaacetic acid-treated carbon nanotubes 2015 Author(s) : Kazi Md. Salim Newaz Source : Rsc Advances
237.	Highly dispersed reduced graphene oxide and its hybrid complexes as effective additives for improving thermophysical property of heat transfer fluid 2015 Author(s) : Misni Bin Misran, Ahmad Badarudin Bin Mohamad Badry, Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz, Huang Nay Ming, Norazriena Binti Yusoff Source : INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER DOI : 10.1016/j.ijheatmasstransfer.2015.04.017
238.	Microwave-Assisted Synthesis of Highly-Crumpled, Few-Layered Graphene and Nitrogen- Doped Graphene for Use as High-Performance Electrodes in Capacitive Deionization 2015 Author(s) : Kazi Md. Salim Newaz Source : Nature Scientific Reports
239.	Spongy nitrogen-doped activated carbonaceous hybrid derived from biomass material/graphene oxide for supercapacitor electrodes 2015 Author(s) : Kazi Md. Salim Newaz Source : Rsc Advances
240.	Nitrogen doped activated carbon/graphene with high nitrogen level: Green synthesis and thermo-electrical properties of its nanofluid 2015 Author(s) : Kazi Md. Salim Newaz Source : Materials Letters
241.	Experimental investigation of the prypylene glycol treated graphene nanoplatelets of closed conduit turbulent convective heat transfer 2015 Author(s) : Kazi Md. Salim Newaz Source : International communications in heat and mass transfer
242.	Heat transfer coefficient of flowing wood pulp fibre suspensions to monitor fibre and paper quality 2015 Author(s) : Kazi Md. Salim Newaz Source : Applied Thermal Engineering
243.	Laminar convective heat transfer of hexylamine-treated MWCNTs-based turbine oil nanofluid 2015 Author(s) : Kazi Md. Salim Newaz Source : Energy Conversion and Management
244.	Heat Transfer and Turbulent Fluid Flow over Vertical Double Forward-Facing Step. 2014 Author(s) : Kazi Md. Salim Newaz Source : World Academy of Science, Engineering and Technology.
245.	Extension of Weighted Sum of Gray Gas Data to Mathematical Simulation of Radiative Heat Transfer in a Boiler with Gas-Soot Media 2014 Author(s) : Kazi Md. Salim Newaz Source : Scientific World Journal
246.	A comprehensive literature review of bio-fuel performance in internal combustion engine and relevant costs involvement 2014 Author(s) : Kazi Md. Salim Newaz Source : Renewable and Sustainable Energy Reviews
247.	Pool boiling heat transfer of CNT/water nanofluids. 2014 Author(s) : Kazi Md. Salim Newaz Source : Applied Thermal Engineering
248.	INVESTIGATION OF HEAT TRANSFER ENHANCEMENT IN A FORWARD-FACING CONTRACTING CHANNEL USING FMWCNT NANOFLUIDS 2014 Author(s) : Kazi Md. Salim Newaz Source : Numerical Heat Transfer, Part A
249.	Simulation of heat transfer to turbulent nanofluid flow in an annular passage 2014 Author(s) : Kazi Md. Salim Newaz Source : Advanced Material Research
250.	Investigation of Micro- and Nanosized Particle Erosion in a 90 degree Pipe Bend Using a Two-Phase Discrete Phase Model. 2014 Author(s) : Kazi Md. Salim Newaz Source : Scientific World Journal
251.	An experimental study on thermal conductivity and viscosity of nanofluids containing carbon nanotubes 2014 Author(s) : Kazi Md. Salim Newaz Source : Nanoscale Research Letters
252.	Experimental Investigation of Convective Heat Transfer Using Graphene Nanoplatelet Based Nanofluids under Turbulent Flow Conditions 2014 Author(s) : Hendrik Simon Cornelis Metselaar, Kazi Md. Salim Newaz, Mohammad Mehrali Source : Industrial Engineering Chemistry Research
253.	A review of Safety, Health and Environmental(SHE)issues of solar energy system. 2014 Author(s) : Kazi Md. Salim Newaz Source : Renewable and Sustainable Energy Reviews
254.	Basic effects of pulp refining on fiber properties A review 2014 Author(s) : Kazi Md. Salim Newaz Source : Carbohydrate Polymers
255.	Numerical Investigation of Heat Transfer Enhancement in a Rectangular Heated Pipe for Turbulent Nanofluid 2014 Author(s) : Kazi Md. Salim Newaz Source : Scientific World Journal
256.	Investigation of nanofluid mixed convection in a shallow cavity using a two-phase mixture model 2014 Author(s) : Kazi Md. Salim Newaz Source : International Journal of Thermal Sciences
257.	Study of the effect of entrance length on heat transfer to fibre suspensions in annular flow heat exchangers. 2014 Author(s) : Kazi Md. Salim Newaz Source : International Journal of Heat and Mass Transfer
258.	Numerical Study of Heat Transfer and Laminar Flow over a Backward Facing Step with and without Obstacle 2014 Author(s) : Kazi Md. Salim Newaz Source : World Academy of Science, Engineering and Technology
259.	Simulation of heat transfer to separation Air flow in a concentric pipe. 2014 Author(s) : Kazi Md. Salim Newaz Source : International Communications in Heat and Mass Transfer
260.	Entropy generation during turbulent flow of zirconia-water and other nanofluids in a square cross section tube with a constant heat flux 2014 Author(s) : Kazi Md. Salim Newaz Source : Entropy
261.	Simulation of heat transfer to separation Air flow in a concentric pipe 2014 Author(s) : Ahmad Badarudin Bin Mohamad Badry, Chew Bee Teng, Kazi Md. Salim Newaz Source : International Communications in Heat and Mass Transfer
262.	Numerical Investigation of Heat Transfer Enhancement in a Rectangular Heated Pipe for Turbulent Nanofluid 2014 Author(s) : Kazi Md. Salim Newaz, Houman Yarmand Source : Scientific World Journal
263.	A review of studies on forced, natural and mixed heat transfer to fluid and nanofluid flow in an annular passage. 2014 Author(s) : Kazi Md. Salim Newaz Source : Renewable and Sustainable Energy Reviews
264.	Preparation, characterization, viscosity, and thermal conductivity of nitrogen-doped graphene aqueous nanofluids 2014 Author(s) : Kazi Md. Salim Newaz Source : J Mater Sci
265.	Validation of heat transfer and friction loss data for fibre suspensions in a circular and a coaxial pipe heat exchanger. 2014 Author(s) : Kazi Md. Salim Newaz Source : International Journal of Thermal Sciences
266.	INVESTIGATION OF HEAT TRANSFER ENHANCEMENT IN A FORWARD-FACING CONTRACTING CHANNEL USING FMWCNT NANOFLUIDS 2014 Author(s) : Ahmad Badarudin Bin Mohamad Badry, Kazi Md. Salim Newaz Source : Numerical Heat Transfer Part a-Applications
267.	Mixed convection of copper.water nanofluid in a shallow inclined lid driven cavity using the lattice Boltzmann method. 2014 Author(s) : Kazi Md. Salim Newaz Source : PHYSICA-A
268.	Pool boiling heat transfer of CNT/water nanofluids 2014 Author(s) : Chew Bee Teng, Kazi Md. Salim Newaz Source : Applied Thermal Engineering
269.	A review of studies on forced, natural and mixed heat transfer to fluid and nanofluid flow in an annular passage 2014 Author(s) : Ahmad Badarudin Bin Mohamad Badry, Kazi Md. Salim Newaz Source : Renewable Sustainable Energy Reviews
270.	An experimental study on thermal conductivity and viscosity of nanofluids containing carbon nanotubes 2014 Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz, Mahidzal Bin Dahari Source : NANOSCALE RESEARCH LETTERS DOI : 10.1186/1556-276X-9-151
271.	Extension of Weighted Sum of Gray Gas Data to Mathematical Simulation of Radiative Heat Transfer in a Boiler with Gas-Soot Media 2014 Author(s) : Kazi Md. Salim Newaz, Houman Yarmand Source : Scientific World Journal
272.	Mixed convection of copper-water nanofluid in a shallow inclined lid driven cavity using the lattice Boltzmann method 2014 Author(s) : Kazi Md. Salim Newaz Source : Physica a-Statistical Mechanics and Its Applications
273.	Numerical simulation of laminar to turbulent nanofluid flow and heat transfer over a backward-facing step 2014 Author(s) : Ahmad Badarudin Bin Mohamad Badry, Kazi Md. Salim Newaz Source : Applied Mathematics and Computation
274.	Numerical Study of Entropy Generation due to Coupled Laminar and Turbulent Mixed Convection and Thermal Radiation in an Enclosure Filled with a Semitransparent Medium 2014 Author(s) : Kazi Md. Salim Newaz, Mahidzal Bin Dahari Source : Scientific World Journal
275.	A comprehensive literature review of bio-fuel performance in internal combustion engine and relevant costs involvement 2014 Author(s) : Ahmad Badarudin Bin Mohamad Badry, Kazi Md. Salim Newaz, Mohammad Mehrali Source : Renewable Sustainable Energy Reviews
276.	Comparison of the Finite Volume and Lattice Boltzmann Methods for Solving Natural Convection Heat Transfer Problems inside Cavities and Enclosures 2014 Author(s) : Kazi Md. Salim Newaz, Mahidzal Bin Dahari Source : Abstract and Applied Analysis
277.	Investigation of nanofluid mixed convection in a shallow cavity using a two-phase mixture model 2014 Author(s) : Kazi Md. Salim Newaz, Mahidzal Bin Dahari Source : International Journal of Thermal Sciences
278.	Investigation of thermal conductivity and rheological properties of nanofluids containing graphene nanoplatelets 2014 Author(s) : Hendrik Simon Cornelis Metselaar, Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz, Mohammad Mehrali Source : NANOSCALE RESEARCH LETTERS DOI : 10.1186/1556-276X-9-15
279.	Entropy Generation during Turbulent Flow of Zirconia-water and Other Nanofluids in a Square Cross Section Tube with a Constant Heat Flux 2014 Author(s) : Kazi Md. Salim Newaz, Houman Yarmand Source : Entropy
280.	Investigation of pollutant reduction by simulation of turbulent non-premixed pulverized coal combustion 2014 Author(s) : Kazi Md. Salim Newaz Source : Applied Thermal Engineering
281.	Preparation, characterization, viscosity, and thermal conductivity of nitrogen-doped graphene aqueous nanofluids 2014 Author(s) : Hendrik Simon Cornelis Metselaar, Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz, Mohammad Mehrali Source : JOURNAL OF MATERIALS SCIENCE DOI : 10.1007/s10853-014-8424-8
282.	Validation of heat transfer and friction loss data for fibre suspensions in a circular and a coaxial pipe heat exchanger 2014 Author(s) : Kazi Md. Salim Newaz Source : International Journal of Thermal Sciences
283.	Sustainability and environmental impact of ethanol as a biofuel 2014 Author(s) : Ahmad Badarudin Bin Mohamad Badry, Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz, Oon Cheen Sean Source : REVIEWS IN CHEMICAL ENGINEERING DOI : 10.1515/revce-2013-0024
284.	Public acceptance of solar energy: The case of Peninsular Malaysia. 2013 Author(s) : Kazi Md. Salim Newaz Source : IEEE 2013 Tencon - Spring
285.	Development of Two-phase Flow Sensor for Measurement of Parameters in Gas-Liquid System 2013 Author(s) : Kazi Md. Salim Newaz Source : Modern Mechanical Engineering, Scientific Research
286.	Numerical Simulation on Heat Transfer Enhancement in Channel by TriangularRibs 2013 Author(s) : Kazi Md. Salim Newaz Source : World Academy of Science, Engineering and Technology
287.	A review of milk fouling on heat exchanger surfaces 2013 Author(s) : Kazi Md. Salim Newaz Source : Reviews in Chemical Engineering.
288.	Fouling mitigation of heat exchangers with natural fibres 2013 Author(s) : Kazi Md. Salim Newaz Source : Applied Thermal Engineering
289.	CFD Simulation of Heat Transfer and Turbulent Fluid Flow over a Double Forward-Facing Step 2013 Author(s) : Ahmad Badarudin Bin Mohamad Badry, Kazi Md. Salim Newaz Source : Mathematical Problems in Engineering
290.	A comprehensive review of bio-diesel as alternative fuel for compression ignition engines 2013 Author(s) : Ahmad Badarudin Bin Mohamad Badry, Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz, Mohammad Mehrali, Oon Cheen Sean Source : RENEWABLE & SUSTAINABLE ENERGY REVIEWS DOI : 10.1016/j.rser.2013.08.003
291.	Investigation of viscosity and thermal conductivity of alumina nanofluids with addition of SDBS 2013 Author(s) : Mohd Hamdi Bin Abd Shukor, Hendrik Simon Cornelis Metselaar, Kazi Md. Salim Newaz Source : HEAT AND MASS TRANSFER DOI : 10.1007/s00231-013-1153-8
292.	Sustainability and environmental impact of ethanol as a biofuel 2013 Author(s) : Kazi Md. Salim Newaz Source : Rev Chem Eng DOI : 10.1515/revce-2013-0024
293.	Numerical Study of Turbulent Heat Transfer in Separated Flow: Review 2013 Author(s) : Kazi Md. Salim Newaz Source : International Review of Mechanical Engineering (IREME)
294.	Enhancements Of Heat Transfer Nanofluid Flow In Circular PipeWith Twisted Tape Inserts: Review. 2013 Author(s) : Kazi Md. Salim Newaz Source : Australian Journal of Basic and Applied Sciences,
295.	Computational Simulation of Heat Transfer to Separation Fluid Flow in an Annular Passage 2013 Author(s) : Kazi Md. Salim Newaz Source : International Communications in Heat and Mass Transfer
296.	Fouling mitigation of heat exchangers with natural fibres 2013 Author(s) : Kazi Md. Salim Newaz Source : Applied Thermal Engineering
297.	A review of milk fouling on heat exchanger surfaces 2013 Author(s) : Ahmad Badarudin Bin Mohamad Badry, Kazi Md. Salim Newaz, Oon Cheen Sean Source : Reviews in Chemical Engineering
298.	Computational simulation of heat transfer to separation fluid flow in an annular passage 2013 Author(s) : Ahmad Badarudin Bin Mohamad Badry, Kazi Md. Salim Newaz, Oon Cheen Sean Source : International Communications in Heat and Mass Transfer
299.	Numerical study of turbulent heat transfer in annular pipe with sudden contraction 2013 Author(s) : Kazi Md. Salim Newaz Source : Applied Mechanics and Materials DOI : 10.4028/www.scientific.net/AMM
300.	A comprehensive review of bio-diesel as alternativefuel for compression ignition engines 2013 Author(s) : Kazi Md. Salim Newaz Source : Renewable and Sustainable Energy Reviews
301.	A comprehensive review of milk fouling on heated surfaces 2013 Author(s) : Ahmad Badarudin Bin Mohamad Badry, Kazi Md. Salim Newaz Source : Critical Reviews in Food Science and Nutrition
302.	Numerical analysis of the effect of vortex control mechanism on longitudinal aerodynamics of lifting body 2013 Author(s) : Kazi Md. Salim Newaz Source : Aerospace Science and Technology
303.	CFD Simulation of Heat Transfer and Turbulent Fluid Flow over a Double Forward-Facing Step 2013 Author(s) : Kazi Md. Salim Newaz Source : Hindawi Publishing Corporation, Mathematical Problems in Engineering
304.	Heat Transfer to Separation Flow in Heat Exchangers 2012 Author(s) : Kazi Md. Salim Newaz Source : An Overview of Heat Transfer Phenomena. ISBN 978-953-51-0827-6, InTech, Publisher
305.	Validation of heat transfer data for fibre suspensions in coaxial pipe heat exchangers 2012 Author(s) : Kazi Md. Salim Newaz Source : Experimental Thermal and Fluid Science
306.	ACID CLEANING OF GYPSUM DEPOSITS FROM A HEAT TRANSFER SURFACE 2012 Author(s) : Kazi Md. Salim Newaz Source : Chemical Engineering Communications
307.	Numerical simulation of heat transfer to separation air flow in an annular pipe 2012 Author(s) : Ahmad Badarudin Bin Mohamad Badry, Kazi Md. Salim Newaz Source : International Communications in Heat and Mass Transfer
308.	Numerical Study of Entropy Generation in a Flowing Nanofluid Used in Micro- and Minichannels 2012 Author(s) : Kazi Md. Salim Newaz Source : Entropy
309.	Entropy Generation in Micro, Mini Channel Operated with Nano-fluids for Laminar Flow 2012 Author(s) : Kazi Md. Salim Newaz Source : Archives Des Sciences
310.	Heat exchanger fouling and its mitigation 2012 Author(s) : Kazi Md. Salim Newaz Source : Heat Exchangers, Book, ISBN 979-953-307-325-4, Intech, Open Access Publishers
311.	Fouling and fouling mitigation on heated metal surfaces 2012 Author(s) : Kazi Md. Salim Newaz Source : DESALINATION
312.	A review on the performance of nanoparticles suspended with refrigerants and lubricating oils in refrigeration systems 2011 Author(s) : Kazi Md. Salim Newaz Source : Renewable and sustainable energy Reviews
313.	Energy savings and emission reduction for rewinding and replacement of industrial motor 2011 Author(s) : Kazi Md. Salim Newaz Source : Energy
314.	Heat transfer and pressure drop characteristics of suspensions of synthetic and wood pulp fibres in annular flow 2011 Author(s) : Kazi Md. Salim Newaz Source : Applied Thermal Engineering
315.	Power boosting of a modified natural gas engine 2011 Author(s) : Kazi Md. Salim Newaz Source : INTERNATIONAL JOURNAL OF THE PHYSICAL SCIENCES
316.	A Review of Experimental Study of Turbulent Heat Transfer in Separated Flow,Hussein Togun 2011 Author(s) : Kazi Md. Salim Newaz Source : Australian Journal of Basic and Applied Sciences
317.	Mineral scale formation and mitigation on metals and a polymeric heat exchanger surface 2010 Author(s) : Kazi Md. Salim Newaz Source : Applied Thermal Engineering
318.	Performance investigation of an automotive car radiator operated with nanofluid based coolants 2010 Author(s) : Saidur Rahman Abdul Hakim, Kazi Md. Salim Newaz Source : Applied Thermal Engineering
319.	An experimental study of heat transfer to turbulent separation fluid flow in an annular passage 2010 Author(s) : Kazi Md. Salim Newaz Source : International journal of heat and mass transfer
320.	Heat transfer to flowing fibre suspensions 2003 Author(s) : Kazi Md. Salim Newaz Source : Journal of Pulp and Paper Science
321.	Fibre-modified scaling in heat transfer fouling mitigation 2002 Author(s) : Kazi Md. Salim Newaz Source : Chemical Engineering Communications
322.	Pulp fibre quality measurement from flowing wood pulp fibre suspensions 2002 Author(s) : Kazi Md. Salim Newaz Source : Das Papier Journal
323.	Heat transfer in the drag reducing regime of wood pulp fibre suspensions 1999 Author(s) : Kazi Md. Salim Newaz Source : Chemical Engineering Journal
324.	Steam blowing and acceptance criteria 1993 Author(s) : Kazi Md. Salim Newaz Source : Journal of Institution of Engineers, Bangladesh
325.	Effect of fin angles on cross flow heat transfer from a tube 1992 Author(s) : Kazi Md. Salim Newaz Source : Journal of the Institution of Engineers, India, Mech. Engg., Division

BOOK

NO	DETAILS OF BOOK
1.	Graphene and 2D Materials in Heat Transfer 2023 Author(s) : Kazi Md. Salim Newaz
2.	Chapter 5 - Nanofluids-based optical filtering for photovoltaic/thermal system 2023 Author(s) : Kazi Md. Salim Newaz
3.	Heat Transfer - Fundamentals, Enhancement and Applications 2023 Author(s) : Kazi Md. Salim Newaz
4.	Chapter 6-2D materials in phase change materials. 2023 Author(s) : Kazi Md. Salim Newaz
5.	Chapter 6 - Particulate matter: Interfacial properties, fouling, and its mitigation 2022 Author(s) : Kazi Md. Salim Newaz
6.	Introductory Chapter: Low-Temperature Technologies 2022 Author(s) : Kazi Md. Salim Newaz
7.	Particulate matter: Interfacial properties, fouling, and its mitigation 2022 Author(s) : Kazi Md. Salim Newaz
8.	Low-Temperature Technologies and Applications 2022 Author(s) : Kazi Md. Salim Newaz
9.	Advanced Aspects of Engineering Research Vol. 9 2021 Author(s) : Kazi Md. Salim Newaz
10.	Phase Changing Materials Based Super Capacitors 2021 Author(s) : Kazi Md. Salim Newaz
11.	Pulp and Paper Processing 2018 Author(s) : Kazi Md. Salim Newaz
12.	Heat Transfer Studies and Applications 2015 Author(s) : Kazi Md. Salim Newaz
13.	An Overview of Heat Transfer Phenomena 2012 Author(s) : Kazi Md. Salim Newaz
14.	Heat Transfer Phenomena and Applications 2012 Author(s) : Kazi Md. Salim Newaz

CHAPTER IN BOOK

NO	DETAILS OF CHAPTER IN BOOK
1.	Introductory Chapter: Low-Temperature Technologies 2022 Author(s) : Kazi Md. Salim Newaz
2.	Industrial Heat Exchanger: Operation and Maintenance to Minimize Fouling and Corrosion 2017 Author(s) : Kazi Md. Salim Newaz
3.	Microbial toxicity of different functional groups-treated carbon nanotubes 2016 Author(s) : Kazi Md. Salim Newaz
4.	Nanofluids Basic Principles and Modern Aspects 2015 Author(s) : Kazi Md. Salim Newaz
5.	Particulate Matter: Interfacial Properties, Fouling, and Its Mitigation 2015 Author(s) : Kazi Md. Salim Newaz
6.	Numerical Simulation of Heat Transfer to TiO2-Water Nanofluid Flow in a Double-Tube Counter Flow Heat Exchanger 2015 Author(s) : Kazi Md. Salim Newaz
7.	Heat Transfer and Nanofluid Flow Through Different Geometries 2015 Author(s) : Kazi Md. Salim Newaz
8.	Viscosity of Ethylene Glycol + Water based Al2O3 Nanofluids with addition of SDBS dispersant 2013 Author(s) : Kazi Md. Salim Newaz
9.	Heat Transfer to Separation Flow in Heat Exchangers 2012 Author(s) : Kazi Md. Salim Newaz
10.	Heat exchanger fouling and its mitigation 2011 Author(s) : Kazi Md. Salim Newaz

PROCEEDING

NO	DETAILS OF PROCEEDING
1.	Synthesis and characterization of green-functionalized graphene nanofluids as an enhanced working fluid in heat transfer applications 2022 Author(s) : Kazi Md. Salim Newaz
2.	Investigation of heat transfer enhancement in an annular conduit with angled fins using functionalized GNP colloidal suspension 2021 Author(s) : Kazi Md. Salim Newaz
3.	Enhanced Heat Transfer Performance in a Forward-Facing Channel Using Nanofluids 2019 Author(s) : Kazi Md. Salim Newaz
4.	Comparative analysis of heat transfer coefficient for wood and non-wood pulp fiber 2018 Author(s) : Kazi Md. Salim Newaz
5.	Design a High Efficiency Plasmonic Nanofluid for Direct Absorption Concentrating Solar Power 2018 Author(s) : Kazi Md. Salim Newaz
6.	Non-invasive Electromagnetic Wave Cavity Sensor System for Fluid Fraction Measurement 2018 Author(s) : Kazi Md. Salim Newaz
7.	Experimental investigation on momentum and drag reduction of Malaysian crop suspensions in closed conduit flow 2017 Author(s) : Kazi Md. Salim Newaz
8.	The RSM approach to develop a new correlation for density of metal-oxide aqueous nanofluids 2017 Author(s) : Kazi Md. Salim Newaz, Houman Yarmand, Ahmad Badarudin Bin Mohamad Badry
9.	Preparation and characterization of nanocrystalline cellulose from Acacia mangium 2016 Author(s) : Kazi Md. Salim Newaz
10.	Numerical Simulation of Heat transfer to TiO2-water nanofluid flow in a double-tube counter flow heat exchanger 2014 Author(s) : Kazi Md. Salim Newaz
11.	Numerical Simulation of Heat Transfer to Separation TiO2/Water Nanofluids Flow in an Asymmetric Abrupt Expansion 2014 Author(s) : Kazi Md. Salim Newaz
12.	Numerical Investigation of Heat Transfer to Fully Developed Turbulent Air Flow in a Concentric Pipe 2013 Author(s) : Kazi Md. Salim Newaz
13.	A study of fouling and fouling mitigation on smooth and roughened metallic surfaces, and a polymer material 2001 Author(s) : Kazi Md. Salim Newaz
14.	Heat transfer coefficient a new way to monitor wood pulp quality 2000 Author(s) : Kazi Md. Salim Newaz
15.	Heat Transfer to natural fibre suspensions 1988 Author(s) : Kazi Md. Salim Newaz

RESEARCH PROJECT

GRANT	PROGRESS	STATUS
Heat exchanger fouling mitigation by environmental friendly nano composite coatings on heat exchanger surfaces Researcher(s) : Dr. Zaira Zaman Chowdhury, Gurusidewar. S, Rajendran R		end
Study Of Mechanism And Mitigation Of Mineral Salts Deposition On Heated Surface By Environmental Friendly Approach Researcher(s) : Prof. Dr. Mohd Rafie Bin Johan, Dr. Mohd Nashrul Bin Mohd Zubir, Dr. Zaira Zaman Chowdhury		end
Heat Exchanger Fouling Mitigation By Additives And Coatings Researcher(s) : Fadi Alnaimat		end
Mitigation Of Deposition On Heat Exchanger Surfaces By Nanoparticle Additives And Conductive Polymeric Coatings		end
Fouling Mitigation Of Heat Exchangers Surfaces Utilizing Eco-friendly Additives And Conductive Coatings Researcher(s) : Dr. Mohd Nashrul Bin Mohd Zubir, Dr. Ahmad Badarudin Bin Mohamad Badry		end
Fouling And Fouling Mitigation Of Heat Exchangers By Bio-based Additives And Conductive Polymeric Coatings Researcher(s) : Professor Dato' Ir. Dr. Mohd Hamdi Bin Abd Shukor, Dr. Mohd Nashrul Bin Mohd Zubir, Associate Prof. Ir. Dr. Mohd Ridha Bin Muhamad @ Mohd Ata'illah		end
Synthesis Of High Performance Heat Exchange Liquids And Fowling Mitigation On Heat Exchanger Surface By Environmental Friendly Surface Coating Researcher(s) : Dr. Mohd Nashrul Bin Mohd Zubir		end
Synthesis Of Micro And Nano-structured Carbon Functionalized Metal Oxide Hybrid Composites : Combination Of Adsorption And Efficient Photo-degradation For Mitigation Of Estrogens From Aqueous Effluents Researcher(s) : Dr. Zaira Zaman Chowdhury, Associate Prof. Dr. Yarub Kahtan Abdul-rahman Al-douri, Associate Prof. Dr. Nurhidayatullaili Binti Muhd Julkapli, Dr. Wageeh Abdulhadi Yehya Dabdawb, Prof. Dr. Mohd Rafie Bin Johan, Associate Prof. Ir. Ts. Dr. Lai Chin Wei, Associate Prof. Dr. Leo Bey Fen		end
Experimental And Numerical Study Of Heat Transfer And FrictionLoss Of Nano Fluids In A Closed Conduit Flow Researcher(s) : -		end
A New Design, Analysis And Testing Of A Horizontal Tube-in-shell Storage Unit For Thermal Energy Storage Characteristics Investigation Of A Phase Change Material Researcher(s) : -		end
Retardation Of Heat Exchanger Fouling By Using Catalytic Materials		end
Enhancement Of Cooling Performance Of Molds And Parts Of Critical Equipment By Nanofluid Coolant		end
Corrosion And Fouling Mitigation For Food Industries Via Modification Of Heat Exchanger.		end
AN EXPERIMENTAL AND SIMULATION OF HEAR TRANSFER TO TURBULENT SEPARATION FLUID FLOW IN AN CONCENTRIC PIPE		end
Heat Transfer to Particle Suspension Flow, Particle Characterization and Heat Excharger Fouling Study and Mitigation.		end

RESEARCH COLLABORATOR

GRANT	PROGRESS	STATUS
Fundamental Study Of Gas Particles In Large Scale Metal Hydrides: A Model-based For Thermodynamic And Kinetic Analysis Researcher(s) : Dr. Kazi Md. Salim Newaz, Dr. Muhamad Fazly Bin Abdul Patah, Tan Jian Ding		on going
Development of a Novel Evaporative-Radiative Cooling Sheet for Sub-Ambient Cooling in Tropical Climate Researcher(s) : Prof. Dr. Sulaiman Wadi Harun, Dr. Kazi Md. Salim Newaz, Dr. Zaira Zaman Chowdhury, Dr. Tuan Zaharinie Binti Tuan Zahari		on going
1. Green Synthesis of Graphane/CNTs/Carbon for Advanced Manufacturing of Nano Bio-Hybrid Composites: Energy and Environmental Application (Water Treatment) with Nano Toxicity Assays Antimicrobial Properties Studies 2. Molecular Interfaces of Aromatic Ring and Its&#039; Nitro derivatives (Nitrobenzene) via Adsorption Process using Nano-porous Carbon/ Waste Rubber Composites: Effects of Chlorine Substitution in Ortho, meta and Para Position: Artificial Neural Network Approach Researcher(s) : Dr. Kazi Md. Salim Newaz, Prof. Dr. Mohd Rafie Bin Johan, Dr. Yasmin Binti Abdul Wahab, Rajendran R, Minh Hoang Tran, Karthickeyan Viswanathan, Amutha Chinnappan, Seeram Ramakrishna		end
Passive Radiative Cooling Of Multi-layered Nanostructured Based Emitter-reflector Metamaterial For Enhanced Heat Management Researcher(s) : Associate Prof. Dr. Amalina Binti Muhammad Afifi, Prof. Dr. Mohd Rafie Bin Johan, Dr. Kazi Md. Salim Newaz, Dr. Mohd Nashrul Bin Mohd Zubir, Ir. Dr. Suriani Binti Ibrahim, Associate Prof. Ir. Dr. Mohd Ridha Bin Muhamad @ Mohd Ata'illah, Mahshuri Binti Yusof		end
Development Of Heat Exchanger Module Incorporating Chemically And Mechanically Enhanced Surface Texturing For Dew Point Evaporative Cooling With Large Temperature Difference Researcher(s) : Dr. Kazi Md. Salim Newaz, Dr. Mohd Yazed Bin Ahmad		end
Study on the Absorption and Desorption of Ti-based AB2-type Alloys based Material for Hydrogen Storage and Fuel System Researcher(s) : Dr. Kazi Md. Salim Newaz, Associate Prof. Dr. Anis Salwa Binti Mohd Khairuddin		end
Development Of A State-of-the-art Passive Radiative Cooling Sheet Incorporating Hybrid Multi-layer Photonic Metamaterials For Advanced Heat Management Application Researcher(s) : Prof. Dr. Sulaiman Wadi Harun, Dr. Kazi Md. Salim Newaz, Associate Prof. Ir. Dr. Mohd Ridha Bin Muhamad @ Mohd Ata'illah		end
Synthesis Of High Performance Heat Exchange Liquids And Fowling Mitigation On Heat Exchanger Surface By Environmental Friendly Surface Coating-2 Researcher(s) : Dr. Kazi Md. Salim Newaz		end
Study of the effect of magnetic field on improving heat transfer in closed conduit using magnetic based colloids Researcher(s) : Dr. Kazi Md. Salim Newaz, Dr. Ahmad Badarudin Bin Mohamad Badry, Dr. Wageeh Abdulhadi Yehya Dabdawb, Associate Prof. Dr. Wan Nor Liza Binti Wan Mahadi		end