ARTICLE IN ACADEMIC JOURNALS
| NO | DETAILS OF ARTICLE IN ACADEMIC JOURNALS |
|---|---|
| 1. |
Deformation and Fracture Behavior of Sandwiched Copper Foam Brazed Joint Using Amorphous Copper-Tin-Nickel-Phosphorus Filler
2021
Source : FRONTIERS IN MATERIALS DOI : 10.3389/fmats.2021.665219 |
| 2. |
Enhancements on Dissimilar Friction Stir Welding Between AZ31 and SPHC Mild Steel With Al-Mg as Powder Additives
2021
Source : JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME DOI : 10.1115/1.4049745 |
| 3. |
A comprehensive assessment of laser welding of biomedical devices and implant materials: recent research, development and applications
2021
Author(s) : Farazila Binti Yusof Source : CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES DOI : 10.1080/10408436.2019.1708701 |
| 4. |
Investigation on Strength and Microstructural Evolution of Porous Cu/Cu Brazed Joints Using Cu-Ni-Sn-P Filler
2020
Author(s) : Farazila Binti Yusof,Tuan Zaharinie Binti Tuan Zahari Source : METALS |
| 5. |
Brazing of porous copper foam/copper with amorphous Cu-9.7Sn-5.7Ni-7.0P (wt%) filler metal: interfacial microstructure and diffusion behavior
2020
Author(s) : Farazila Binti Yusof,Nazatul Liana Binti Sukiman Source : WELDING IN THE WORLD |
| 6. |
High-Brightness and High-Power Laser Welding of Powder Metallurgy Shape Memory Alloy: Welding-Parameter-Dependent Microstructure
2020
Author(s) : Farazila Binti Yusof Source : JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE |
| 7. |
Quantitative Evaluation of Masticatory Performance with Two-Color Mixing Ability Test: Development of a New Digital Method
2020
Author(s) : Farazila Binti Yusof Source : INTERNATIONAL JOURNAL OF PROSTHODONTICS |
| 8. |
Developing a new laser cladded FeCrMoCB metallic glass layer on nickel-free stainless-steel as a potential superior wear-resistant coating for joint replacement implants
2020
Author(s) : Farazila Binti Yusof Source : Surface and Coatings Technology |
| 9. |
Synergistic strengthening mechanisms of copper matrix composites with TiO2 nanoparticles
2020
Author(s) : Farazila Binti Yusof Source : MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
| 10. |
Improving the friction stir welding tool life for joining the metal matrix composites
2020
Author(s) : Farazila Binti Yusof Source : INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
| 11. |
Brazing of porous copper foam/copper with amorphous Cu-9.7Sn-5.7Ni-7.0P (wt%) filler metal: interfacial microstructure and diffusion behavior
2020
Author(s) : Farazila Binti Yusof Source : Welding in the World |
| 12. |
Developing a new laser cladded FeCrMoCB metallic glass layer on nickel-free stainless-steel as a potential superior wear-resistant coating for joint replacement implants
2020
Author(s) : Farazila Binti Yusof Source : SURFACE COATINGS TECHNOLOGY |
| 13. |
Effect of amorphous silica by rice husk ash on physical properties and microstructures of recycled aluminium chip AA7075
2019
Author(s) : Farazila Binti Yusof Source : MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK |
| 14. |
Characterization and hardness enhancement of amorphous Fe-based metallic glass laser cladded on nickel-free stainless steel for biomedical implant application
2019
Author(s) : Farazila Binti Yusof Source : MATERIALS CHEMISTRY AND PHYSICS |
| 15. |
Optimization of conditions for improved solar energy harvesting application by hydrothermally grown TiO2 nanorods
2019
Author(s) : Farazila Binti Yusof Source : JOURNAL OF THE IRANIAN CHEMICAL SOCIETY |
| 16. |
Micro-arc oxidation of bioceramic coatings containing eggshell-derived hydroxyapatite on titanium substrate
2019
Author(s) : Farazila Binti Yusof,Ching Yern Chee Source : CERAMICS INTERNATIONAL |
| 17. |
Effect of copper-nickel interlayer thickness on laser welding-brazing of Mg/Ti alloy
2019
Author(s) : Farazila Binti Yusof Source : OPTICS AND LASER TECHNOLOGY |
| 18. |
Advancement of the artificial amorphous-crystalline structure of laser cladded FeCrMoCB on nickel-free stainless-steel for bone-implants
2019
Author(s) : Farazila Binti Yusof Source : MATERIALS CHEMISTRY AND PHYSICS |
| 19. |
Assessment of masticatory performance by geometric measurement of the mixing ability with 2-color chewing gum
2019
Author(s) : Farazila Binti Yusof Source : JOURNAL OF PROSTHETIC DENTISTRY |
| 20. |
Propitious Escalation in Photocurrent Response from MnZnO3 Thin Films Using Methanol as Sacrificial Agent
2019
Author(s) : Farazila Binti Yusof Source : JOURNAL OF ELECTRONIC MATERIALS |
| 21. |
Influence of welding parameters on lap joint between Al and Ti alloys using low power fiber laser
2019
Author(s) : Farazila Binti Yusof Source : MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK |
| 22. |
Influence of electrodeposited Cu-Ni layer on interfacial reaction and mechanical properties of laser welded-brazed Mg/Ti lap joints
2019
Author(s) : Farazila Binti Yusof Source : JOURNAL OF MANUFACTURING PROCESSES |
| 23. |
Advancement of the artificial amorphous-crystalline structure of laser cladded FeCrMoCB on nickel-free stainless-steel for bone-implants
2019
Author(s) : Mohd Hamdi Bin Abd Shukor,Farazila Binti Yusof Source : Materials Chemistry and Physics |
| 24. |
Asymmetric local strain, microstructure and superelasticity of friction stir welded Nitinol alloy
2019
Author(s) : Farazila Binti Yusof Source : MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
| 25. |
Pyrochlore-structured Y2Ti2O7-2TiO(2) composite thin films for photovoltaic applications
2019
Author(s) : Farazila Binti Yusof Source : JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY |
| 26. |
Comparative study on characteristics of laser welded-brazed AZ31/Ti-6Al-4V lap joints with and without coatings
2019
Author(s) : Farazila Binti Yusof Source : INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
| 27. |
Diffuse reflectance spectroscopic analysis of barium sulfate as a reflection standard within 173-2500 nm: From pure to sintered form
2019
Author(s) : Farazila Binti Yusof Source : JOURNAL OF NEAR INFRARED SPECTROSCOPY |
| 28. |
Effect of hot extrusion parameters on microhardness and microstructure in direct recycling of aluminium chipsEinfluss von Warmstrangpress-Parametern auf die Mikroharte und das Gefuge beim Wiederverwerten von Aluminiumspanen
2019
Author(s) : Farazila Binti Yusof Source : MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK |
| 29. |
Anodic pine cone-like WO3/MoO3/TiO2 film with well-defined nanoflakes on Ti-6Al-7Nb implant
2018
Author(s) : Farazila Binti Yusof Source : JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY |
| 30. |
Overview of micro-channel design for high heat flux application
2018
Author(s) : Farazila Binti Yusof Source : RENEWABLE SUSTAINABLE ENERGY REVIEWS |
| 31. |
Microstructure and superelastic properties of free forged Ti-Ni shape-memory alloy
2018
Author(s) : Farazila Binti Yusof Source : TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA |
| 32. |
Mechanical and tribological performance of a hybrid MMC coating deposited on Al-17Si piston alloy by laser composite surfacing technique
2018
Author(s) : Farazila Binti Yusof Source : RSC ADVANCES |
| 33. |
Challenges and advances in laser welding of dissimilar light alloys: Al/Mg, Al/Ti, and Mg/Ti alloys
2018
Author(s) : Farazila Binti Yusof Source : INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
| 34. |
A review on laser beam welding of copper alloys
2018
Author(s) : Farazila Binti Yusof Source : INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
| 35. |
Sensitivity analysis of drill wear and optimization using Adaptive Neuro fuzzy-genetic algorithm technique toward sustainable machining
2018
Author(s) : Farazila Binti Yusof Source : JOURNAL OF CLEANER PRODUCTION |
| 36. |
Microstructure and mechanical properties of micro-resistance spot welding between stainless steel 316L and Ti-6Al-4V
2018
Author(s) : Farazila Binti Yusof Source : INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
| 37. |
Effects of electrolysis on magnetic abrasive finishing of AA6063-T1 tube internal surface using combination machining tool
2018
Author(s) : Farazila Binti Yusof Source : MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK |
| 38. |
Heat-Conduction-Type and Keyhole-Type Laser Welding of Ti-Ni Shape-Memory Alloys Processed by Spark-Plasma Sintering
2018
Author(s) : Farazila Binti Yusof Source : MATERIALS TRANSACTIONS |
| 39. |
Preliminary development of porous aluminum via powder metallurgy technique
2018
Author(s) : Farazila Binti Yusof Source : MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK |
| 40. |
Effect of Process Parameters on the Laser Joining of Stainless Steel with Three-dimensional (3-D) Printed Polymer Sheet
2018
Author(s) : Farazila Binti Yusof Source : LASERS IN ENGINEERING |
| 41. |
A review on laser beam welding of titanium alloys
2018
Author(s) : Farazila Binti Yusof Source : INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
| 42. |
Toward improved mechanical, tribological, corrosion and in-vitro bioactivity properties of mixed oxide nanotubes on Ti-6Al-7Nb implant using multi-objective PSO
2017
Author(s) : Farazila Binti Yusof Source : JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS |
| 43. |
Biomedical materials and techniques to improve the tribological, mechanical and biomedical properties of orthopedic implants - A review article
2017
Author(s) : Farazila Binti Yusof Source : JOURNAL OF ALLOYS AND COMPOUNDS |
| 44. |
Comparison of carbon-based nanomaterials characteristics on H13 tool steel
2017
Author(s) : Farazila Binti Yusof Source : MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK |
| 45. |
The effect of temperature on the formation behavior of reaction layer in Sn-3.0Ag-0.5Cu solder joint with the addition of porous Copper interlayer
2017
Author(s) : Mohd Hamdi Bin Abd Shukor,Farazila Binti Yusof Source : MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK |
| 46. |
Effect of deformation on the microstructure, transformation temperature and superelasticity of Ti-23 at% Nb shape-memory alloys
2017
Author(s) : Farazila Binti Yusof Source : MATERIALS DESIGN |
| 47. |
A novel method of brazing Cu/Cu-7.0Ni-9.3Sn-6.3P/Cu using microwave hybrid heating
2017
Author(s) : Mohd Hamdi Bin Abd Shukor,Farazila Binti Yusof Source : MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK |
| 48. |
Effect of ultrasonic vibration time on the Cu/Sn-Ag-Cu/Cu joint soldered by low-power-high-frequency ultrasonic-assisted reflow soldering
2017
Author(s) : Farazila Binti Yusof Source : Ultrasonics Sonochemistry DOI : 10.1016/j.ultsonch.2016.06.039 |
| 49. |
Evolution of microstructure and mechanical properties of Cu/SAC305/Cu solder joints under the influence of low ultrasonic power
2017
Author(s) : Farazila Binti Yusof Source : JOURNAL OF ALLOYS AND COMPOUNDS |
| 50. |
In-vitro bioassay of electrophoretically deposited hydroxyapatite-zirconia nanocomposite coating on Ti-6Al-7Nb implant
2017
Author(s) : Wan Jefrey Basirun,Farazila Binti Yusof Source : ADVANCES IN APPLIED CERAMICS |
| 51. |
Laser Composite Surfacing of Ni-WC Coating on AA5083 for Enhancing Tribomechanical Properties
2016
Author(s) : Farazila Binti Yusof Source : Tribology Transactions DOI : 10.1080/10402004.2016.1158891 |
| 52. |
Influence of high-power-low-frequency ultrasonic vibration time on the microstructure and mechanical properties of lead-free solder joints
2016
Author(s) : Farazila Binti Yusof Source : Journal of Materials Processing Technology |
| 53. |
Utilization of a Porous Cu Interlayer for the Enhancement of Pb-Free Sn-3.0Ag-0.5Cu Solder Joint
2016
Author(s) : Farazila Binti Yusof Source : Metals DOI : 10.3390/met6090220 |
| 54. |
Autogenous double-sided T-joint welding on aluminum alloys using low power fiber laser
2016
Author(s) : Farazila Binti Yusof Source : International Journal of Advanced Manufacturing Technology DOI : 10.1007/s00170-016-9677-y |
| 55. |
Influence of the Overlapping Factor and Welding Speed on T-Joint Welding of Ti6Al4V and Inconel 600 Using Low-Power Fiber Laser
2016
Author(s) : Farazila Binti Yusof Source : Metals |
| 56. |
Toward improved mechanical, tribological, corrosion and in-vitro bioactivity properties of mixed oxide nanotubes on Ti–6Al–7Nb implant using multi-objective PSO
2016
Author(s) : Farazila Binti Yusof Source : Journal of the Mechanical Behavior of Biomedical Materials DOI : 10.1016/j.jmbbm.2016.11.019 |
| 57. |
A review on resistance spot welding of aluminum alloys
2016
Author(s) : Farazila Binti Yusof Source : International Journal of Advanced Manufacturing Technology DOI : 10.1007/s00170-016-9225-9 |
| 58. |
Fabrication and Compressive Properties of Low to Medium Porosity Closed-Cell Porous Aluminum Using PMMA Space Holder Technique
2016
Author(s) : Farazila Binti Yusof Source : Materials DOI : 10.3390/ma9040254 |
| 59. |
Effect of rare earth elements and their oxides on tribo-mechanical performance of laser claddings: A review
2016
Author(s) : Farazila Binti Yusof Source : Journal of Rare Earths |
| 60. |
Nd:YAG laser welding of Ti-27 at.% Nb shape memory alloys
2016
Author(s) : Farazila Binti Yusof Source : Welding World DOI : 10.1007/s40194-016-0375-z |
| 61. |
Effect of tool rotational speed on force generation, microstructure and mechanical properties of friction stir welded Al Mg Cr Mn (AA 5052-O) alloy
2015
Author(s) : Farazila Binti Yusof Source : materials and design |
| 62. |
Influence of nanoparticle addition on the formation and growth of intermetallic compounds (IMCs) in Cu/Sn Ag Cu/Cu solder joint during different thermal conditions
2015
Author(s) : Farazila Binti Yusof Source : Science and Technology of Advanced Materials |
| 63. |
Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy
2015
Author(s) : Farazila Binti Yusof,Mohd.fadzil Bin Jamaludin Source : International Journal of Materials Research |
| 64. |
A novel combined severe plastic deformation method for producing thin-walled ultrafine grained cylindrical tubes
2015
Author(s) : Farazila Binti Yusof Source : Materials Letters |
| 65. |
Employment of fiber laser technology to weld Austenitic stainless steel 304 L with Aluminum alloy 5083 using pre-placed activating flux
2015
Author(s) : Farazila Binti Yusof Source : Materials and Design |
| 66. |
Reviews: Laser based surface modifications of aluminum and its alloys
2015
Author(s) : Farazila Binti Yusof Source : Critical Reviews in Solid State and Materials Sciences |
| 67. |
Formation behaviour of reaction layer in Sn-3.0Ag-0.5Cu solder joint with addition of porous Cu interlayer
2014
Author(s) : Farazila Binti Yusof Source : IOP Conf. Series: Materials Science and Engineering |
| 68. |
Preliminary study on the feasibility of friction stir welding in 7075 aluminium alloy and polycarbonate sheet
2014
Author(s) : Mohd Hamdi Bin Abd Shukor,Farazila Binti Yusof Source : Materials Research Innovations |
| 69. |
The effect of sintering behaviour of zirconia-doped hydroxyapatite for clinical application
2014
Author(s) : Farazila Binti Yusof Source : Materials Research Innovations |
| 70. |
Characteristics of hybrid microvawe sintering of Zn-Al-Cu-Mg alloy
2014
Author(s) : Farazila Binti Yusof Source : Materials Research Innovations |
| 71. |
Investigation of layer thickness effect on the performance of low-cost and commercial fused deposition modelling printers
2014
Author(s) : Farazila Binti Yusof Source : Materials Research Innovations |
| 72. |
Microstructural analysis of brazing sapphire and Inconel 600 for sensor applications
2014
Author(s) : Farazila Binti Yusof Source : Materials Research Innovations |
| 73. |
Role of mechanical alloying parameters on powder distribution of Al/Cu alloy and Al/Cu composite
2014
Author(s) : Farazila Binti Yusof Source : Materials Research Innovations |
| 74. |
Brazing of Inconel 600 by Active Filler Metal
2014
Source : Materials Research Innovations |
| 75. |
Effect of Molten Pool Shape on Tensile Shear Strength of Dissimilar Materials Laser Spot Joint between Plastic and Metal
2013
Author(s) : Farazila Binti Yusof Source : Journal of Laser Micro/Nanoengineering |
| 76. |
Microstructure analysis of brazed sapphire to Inconel600 using porous interlayer
2013
Author(s) : Farazila Binti Yusof Source : Welding Journal |
| 77. |
Effect of anodizing on pulsed Nd:YAG laser joining of
polyethylene terephthalate (PET) and aluminium alloy
(A5052)
2012
Author(s) : Farazila Binti Yusof Source : Materials & Design |
| 78. |
Utilising friction spot joining for dissimilar
joint between aluminium alloy (A5052) and
polyethylene terephthalate
2012
Author(s) : Farazila Binti Yusof Source : Science and Technology of Welding and Joining |
| 79. |
Evaluation of the material constants of nitrile
butadiene rubbers (NBR)with different carbon black
loading (CB): FE-simulation and experimental
2012
Author(s) : Farazila Binti Yusof Source : Polymer |
| 80. |
A study on interfacial reaction and titanium
distribution in brazing sapphire to Inconel 600
using
Cu/Ni porous composite
2012
Author(s) : Farazila Binti Yusof |
| 81. |
Strength of dissimilar materials joint between A5052
and PET joined by using friction stir heating
2011
Author(s) : Farazila Binti Yusof Source : Journal of Solid Mechanics and Materials Engineering |
| 82. |
YAG Laser Spot Welding of PET and Metallic Materials
2011
Author(s) : Farazila Binti Yusof Source : Journal of laser micro/nanoengineering |
| 83. |
Effect of pre-oxidized CuO layer in joining
between
polyethylene terephalate (PET) and copper (Cu) by
using pulsed Nd:YAG laser
2010
Author(s) : Farazila Binti Yusof |
CHAPTER IN BOOK
| NO | DETAILS OF CHAPTER IN BOOK |
|---|---|
| 1. |
Investigate the Effects of the Laser Cladding Parameters on the Microstructure, Phases Formation, Mechanical and Corrosion
Properties of Metallic Glasses Coatings for Biomedical Implant Application.
2018
Author(s) : Farazila Binti Yusof |
| 2. |
Welding Defects and Implications on Welded Assemblies
2014
Author(s) : Farazila Binti Yusof,Mohd.fadzil Bin Jamaludin |
PROCEEDING
| NO | DETAILS OF PROCEEDING |
|---|---|
| 1. |
Effect of porous Cu plate and particles size of Sn-Ag-Cu lead free solders on microstructure and strength of the joint
2013
Author(s) : Farazila Binti Yusof |
| 2. |
Ultra Friction Stir Welding (FSW) between Aluminium Alloy and Copper
2013
Author(s) : Farazila Binti Yusof |
RESEARCH PROJECT
| GRANT | PROGRESS | STATUS |
|---|---|---|
|
New Concept For Additive Manufacturing Of Fe-based Metallic Glass Using Binder-jetting And Microwave Sintering Approach
Researcher(s) : Professor Dato' Ir. Dr. Mohd Hamdi Bin Abd Shukor,Dr. Mahmoud Zakaria Alsayed Abdalfattah Ibrahim,Nur Ayuni Binti Jamal,Nashrah Hani Binti Jamadon
(Fundamental Research Grant Scheme (FRGS)) |
|
new |
|
Hybrid Manufacturing: Integration Of Direct Energy Deposition (ded) Wire-arc Additive Manufacturing (waam) With Forging Operations For Production Of Net-shaped Lightweight Metal Alloy Components
(Others MOHE) |
|
on going |
|
Low Power Fibre Laser Welding Of Dissimilar Aluminium To Copper Thin Plates With Infused Powder Fillers
Researcher(s) : Mr. Mohd.fadzil Bin Jamaludin
(RU Geran - Fakulti Program) |
|
end |
|
Skin Morphology Probe: A Completely Non-invasive Optical Skin Reflectance Signature Analyzer For Clinical-based Dengue/tropical Disease Screening And Monitoring
Researcher(s) : Associate Prof. Dr. Sharifah Faridah Binti Syed Omar
(Prototype Research Grant Scheme (PRGS)) |
|
end |
|
Pegpformance Evaluation Of Multi Layer Laser Cladding On Nickel Free Stainless Steel For Biomedical Implant
Researcher(s) : Professor Dato' Ir. Dr. Mohd Hamdi Bin Abd Shukor
(RU Geran - Fakulti Program) |
|
end |
|
Laser Soldering Machine
(RU Geran - UMCIC) |
|
end |
|
Investigation Of Flow Field And Thermal Performance Of The Functionally Graded Metal Foam
Researcher(s) : Dr. Bernard Saw Lip Huat,Dr. Thiam Hui San
(RU Geran) |
|
end |
|
Densification Mechanism And Microstructural Evolution Of 3d Laser Metal Sintering For Rapid Fabrication Method.
Researcher(s) : Professor Dato' Ir. Dr. Mohd Hamdi Bin Abd Shukor,Dr. Siti Nurmaya Binti Musa,Mr. Mohd.fadzil Bin Jamaludin
(Fundamental Research Grant Scheme (FRGS)) |
|
end |
|
Investigation And Development Of Manufacturing Process Technologies Portfolio
(Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC))) |
|
end |
|
Resistance Spot Welding of Magnesium Alloy to Twinning Induced Plasticity Steel
Researcher(s) : -
(Postgraduate Research Grant (PPP) - Research) |
|
end |
|
Design And Development Of Ultrasonic Integrated Laser Soldering (uils) Device
Researcher(s) : Prof. Dr. Javad Akbari
(MOSTI-Science Fund) |
|
end |
|
INVESTIGATION OF CADMIUM-FREE BRAZING FILLER METALS BASED ON Ag-Cu-In AND Ag-Cu-Sn
Researcher(s) : -
(Postgraduate Research Grant (PPP) - Research) |
|
end |
|
Joining Of Metalic Materials By Using Microwave Energy
Researcher(s) : -
(Postgraduate Research Grant (PPP) - Research) |
|
end |
|
Development Of Advanced Joining Material Using Ultrasonic Assisted Solderign Technique
Researcher(s) : -
(Postgraduate Research Grant (PPP) - Research) |
|
end |
|
Design And Development Of Portable Micro-Friction Stir Welding Machine
Researcher(s) : --
(Postgraduate Research Grant (PPP) - Research) |
|
end |
|
Friction Stir Welding Of Dissimilar Materials
Researcher(s) : --
(Postgraduate Research Grant (PPP) - Research) |
|
end |
|
Fabrication Of Powder Target For Magnetron
(Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC))) |
|
end |
|
A PRIMARY STUDY ON THE INFLUENCE OF ADDING INTERLAYER ON THE MECHANICAL PROPERTIES OF PB-FREE SOLDERS
(Fundamental Research Grant Scheme (FRGS)) |
|
end |
RESEARCH COLLABORATOR
| GRANT | PROGRESS | STATUS |
|---|---|---|
|
Digital Image Correlation Technique For Mechanical Properties Acquisition And Thermomechanical Assessment Of Thin Sintered Copper Nanoparticles Layer
Researcher(s) : Associate Prof. Dr. Farazila Binti Yusof,Associate Prof. Ir. Dr. Wong Yew Hoong,Farah Liana Binti Mohd Redzuan,Makoto Yoshida
(Fundamental Research Grant Scheme (FRGS)) |
|
new |
|
Aerospace Process Capability Enhancement Towards I4.0 Adoption
Researcher(s) : Associate Prof. Dr. Farazila Binti Yusof,Associate Prof. Ir. Dr. Yap Hwa Jen,Mr. Mohd.fadzil Bin Jamaludin
(Others MOHE - Top 100 (IIRG)-IISS) |
|
on going |
|
Manufacturing of Portable Ventilator
Researcher(s) : Ir. Dr. Mohd Sayuti Bin Ab Karim,Associate Prof. Dr. Farazila Binti Yusof,Dr. Abdul Halim Poh Yuen Wu,Mr. Mohd.fadzil Bin Jamaludin,Mr. Mohd Fauzi Bin Bakri@ Hashim
(Covid-19 Special Research Grant) |
|
end |
|
Indoor Airflow Analysis to Prevent Air-Borne Covid-19 Infection
Researcher(s) : Prof. Dr. Victor Hoe Chee Wai Bin Abdullah,Associate Prof. Sr Dr. Norhayati Binti Mahyuddin,Associate Prof. Dr. Farazila Binti Yusof,Ir. Dr. Mohd Sayuti Bin Ab Karim,Mr. Mohd.fadzil Bin Jamaludin
(Covid-19 Special Research Grant) |
|
end |
|
Friction Stir Welding Of Az61 And Mild Steel Reinforced With Gel Dispersed Carbon Nanotubes And 1060 Particles
Researcher(s) : Professor Dato' Ir. Dr. Mohd Hamdi Bin Abd Shukor,Associate Prof. Dr. Farazila Binti Yusof,Mr. Mohd.fadzil Bin Jamaludin,Dr. Mohd Nashrul Bin Mohd Zubir,Mokhtar Bin Awang,Francesco Lambiase,Hidetoshi Fujii
(Fundamental Research Grant Scheme (FRGS)) |
|
end |
|
Enhancing The Digitalisation And Integration Of Processes And Infrastructure In The Vendors' Value Chains
(RU Geran - Fakulti Program) |
|
end |
|
Elevating Malaysian Smes Supply Chain Towards Industry 4.0
(RU Geran - Fakulti Program) |
|
end |
|
Preheat-assisted Friction Stir Welding Of Thin Mild Steel.
Researcher(s) : Professor Dato' Ir. Dr. Mohd Hamdi Bin Abd Shukor,Associate Prof. Dr. Farazila Binti Yusof,Mokhtar Bin Awang
(RU Geran - Fakulti Program) |
|
end |
|
3d-printed Microstructured Optical Fibres For Integrated Gan-based Optoelectronics
Researcher(s) : Associate Prof. Dr. Farazila Binti Yusof,Zulfadzli Yusoff
(Geran Penyelidikan Universiti Malaya (UMRG Programme) - AFR (Frontier Science)) |
|
end |
|
Prevention of embrittlement crack in deep drawing process of stainless steel cylindrical cups
Researcher(s) : Professor Dato' Ir. Dr. Mohd Hamdi Bin Abd Shukor,Associate Prof. Dr. Farazila Binti Yusof,Dr. Tan Chin Joo,Mr. Mohd.fadzil Bin Jamaludin,Otsu Masaaki,Sumsun Naher,Miura Takuya
(Bantuan Kecil Penyelidikan (BKP)) |
|
end |
|
Tribocorrosion Characterization For Sustainable And Durable Cast Aluminium Alloys In Internal Combustion Engine
Researcher(s) : Associate Prof. Dr. Farazila Binti Yusof,Dr. Nor Ishida Binti Zainal Abidin,Dr. Nurin Wahidah Binti Mohd Zulkifli,Nik Rosli Bin Abdullah
(Fundamental Research Grant Scheme (FRGS)) |
|
end |
|
Investigation On The Utilization Of Porous Metal And Active Filler Metal In Brazing Diamond Grits To Stainless Steel
Researcher(s) : Professor Dato' Ir. Dr. Mohd Hamdi Bin Abd Shukor,Associate Prof. Dr. Farazila Binti Yusof
(Fundamental Research Grant Scheme (FRGS)) |
|
end |
|
Investigation of Rare-Earth Oxide as High Permittivity (k) Gate Dielectric on Wide Bandgap Semiconductor
Researcher(s) : Datin Profesor Ir. Dr. Bushroa Binti Abdul Razak,Associate Prof. Dr. Farazila Binti Yusof,Associate Prof. Dr. Tan Chou Yong,Professor Ir. Dr. Ramesh Singh A/l Kuldip Singh,Prof. Dr. A.s. Md. Abdul Haseeb
(Fundamental Research Grant Scheme (FRGS)) |
|
end |
|
Brazing porous copper to copper for the potential application of cooling devices
Researcher(s) : Associate Prof. Dr. Farazila Binti Yusof
(Bantuan Kecil Penyelidikan (BKP)) |
|
end |
|
Investigation Into The Friction Stir Welding (fsw) Of Steel And Magnesium Dissimilar Metal Joints
Researcher(s) : Associate Prof. Dr. Farazila Binti Yusof
(Research Officer Grant Scheme (ROGS)) |
|
end |
|
Investigation Into The Hybrid Joining Of Metal To Plastic Using Fibre Laser
Researcher(s) : Associate Prof. Dr. Farazila Binti Yusof
(Research Officer Grant Scheme (ROGS)) |
|
end |
|
DEVELOPMENT OF MAGNESIUM METASILICATE CERAMIC FOR INDUSTRIAL APPLICATIONS
Researcher(s) : Associate Prof. Dr. Tan Chou Yong,Associate Prof. Dr. Farazila Binti Yusof,Associate Prof. Ir. Dr. Wong Yew Hoong,Dr Yap Boon Kar
(Program Rakan Penyelidikan UM) |
|
end |
|
Low-temperature Degradation (ltd) Behaviour Of Yttria-stabilised Zirconia
Researcher(s) : Associate Prof. Dr. Tan Chou Yong,Associate Prof. Dr. Farazila Binti Yusof,Professor Ir. Dr. Ramesh Singh A/l Kuldip Singh,Harlina Misran
(Program Rakan Penyelidikan UM) |
|
end |