UMEXPERT - ASSOCIATE PROF. IR. DR. MOHD FAIZUL BIN MOHD SABRI

Publication
Research

ARTICLE IN ACADEMIC JOURNALS

NO	DETAILS OF ARTICLE IN ACADEMIC JOURNALS
1.	Mesoporous ZnO/ZnAl2O4 mixed metal oxide-based Zn/Al layered double hydroxide as an effective anode material for visible light photodetector 2021 Author(s) : Khaulah @ Che Som Binti Sulaiman,Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Materials Science in Semiconductor Processing DOI : 10.1016/j.mssp.2020.105370.
2.	High Cooling performances of H-shape heat sink for Thermoelectric Energy Harvesting system (TEHs) at Asphalt Pavement 2020 Author(s) : Mohd Faizul Bin Mohd Sabri Source : International Journal of Energy Research DOI : 10.1002/er.6021
3.	Experimental investigation of energy storage properties and thermal conductivity of a novel organic phase change material/MXene as A new class of nanocomposites 2020 Author(s) : Suhana Binti Mohd Said,Goh Boon Tong,Mohd Faizul Bin Mohd Sabri Source : Journal of Energy Storage DOI : 10.1016/j.est.2019.101115
4.	Performance of a hybrid fine pitch quad flat package mounted with a new flux on printed circuit board in surface insulation resistance test 2020 Author(s) : Mohd Faizul Bin Mohd Sabri,A.s. Md. Abdul Haseeb,Wong Yew Hoong Source : Materialwissenschaft und Werkstofftechnik (Materials Science and Engineering Technology) DOI : 10.1002/mawe.202000064
5.	Thermal Conductivity, Rheology and Stability analysis of 2D Tungsten Disulfide doped Polyaniline based Nanofluids: An experimental investigation 2020 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Mohd Faiz Bin Mohd Salleh Source : International Journal of Energy Research DOI : 10.1002/er.5697
6.	Optimization of Thermal Conductivity of NanoPCM-Based Graphene by Response Surface Methodology 2020 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences DOI : 10.37934/arfmts.75.3.108125
7.	Metallography, Microstructure, and Wear Analysis of AA 6063/TiC Composites for Augmented Dry Sliding Property at Room Temperature 2020 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Metallography, Microstructure, and Analysis DOI : 10.1007/s13632-020-00625-6
8.	Two-Dimensional Tungsten Disulfide-Based Ethylene Glycol Nanofluids: Stability, Thermal Conductivity, and Rheological Properties 2020 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Mohd Faiz Bin Mohd Salleh Source : Nanomaterials DOI : 10.3390/nano10071340
9.	Molecular design strategies for spin-crossover (SCO) metal complexes (Fe(II) and Co(II)) for thermoelectricity 2020 Author(s) : Suhana Binti Mohd Said,Azizah Binti Mainal,Mohd Faizul Bin Mohd Sabri,Wan Amirul Bin Wan Mohd Mahiyiddin,Mohd Faiz Bin Mohd Salleh Source : Materials Research Bulletin DOI : 10.1016/j.materresbull.2020.110828
10.	Micropatterning and Integration of Electrospun PVDF Membrane Into Microdevice 2020 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Journal of Microelectromechanical Systems DOI : 10.1109/JMEMS.2020.2983717
11.	Fabrication and Photovoltaic Properties of Organic Solar Cell Based on Zinc Phthalocyanine 2020 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Md Mahidur Rahman Sarker,Muhammad Tahir Source : Energies DOI : 10.3390/en13040962
12.	Amplified spontaneous emission and optical gain characteristics of sexithiophene single crystals 2020 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Md Mahidur Rahman Sarker,Muhammad Tahir Source : Optical materials DOI : 10.1016/j.optmat.2020.109695
13.	Enhancement of thermoelectric properties of Co4Sb12 Skutterudite by Al and La double filling, Journal of Solid State Chemistry 2020 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Journal of Solid State Chemistry DOI : 10.1016/j.jssc.2020.121205
14.	Synergistic enhancement in the microelectronic properties of poly-(dioctylfluorene) based Schottky devices by CdSe quantum dots 2020 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Scientific Reports DOI : 10.1038/s41598-020-61602-1
15.	Thermoelectric energy harvesting system (TEHs) at asphalt pavement with a subterranean cooling method 2020 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Energy Sources, Part A: Recovery, Utilization, and Environmental Effects DOI : 10.1080/15567036.2020.1785057
16.	Experimental Assessment of a Novel Eutectic Binary Molten Salt-based Hexagonal Boron Nitride Nanocomposite as a Promising PCM with Enhanced Specific Heat Capacity 2020 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
17.	Modelling and Simulation of the Performance Analysis for Peltier Module and Seebeck Module using MATLAB/Simulink 2020 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Jurnal Kejuruteraan DOI : 10.17576/jkukm-2020-32(2)-07
18.	Evaluation of Thermal Conductivity, Stability and Viscosity of Two Dimensional Hexagonal Boron Nitride Nanofluids 2020 Author(s) : Mohd Faizul Bin Mohd Sabri Source : International Journal of Advanced Science and Technology
19.	Experimental investigation on stability, thermal conductivity and rheological properties of rGO/ethylene glycol based nanofluids 2020 Author(s) : Mohd Faizul Bin Mohd Sabri,Mohd Faiz Bin Mohd Salleh Source : International Journal of Heat and Mass Transfer DOI : 10.1016/j.ijheatmasstransfer.2019.118981
20.	Corrosion insight of iron and bismuth added Sn1Ag0.5Cu lead-free solder alloy 2020 Author(s) : Wan Jefrey Basirun,Mohd Faizul Bin Mohd Sabri,Nazatul Liana Binti Sukiman Source : Corrosion Engineering, Science and Technology DOI : 10.1080/1478422X.2019.1666458
21.	Enhancement of Miscibility and Thermal Properties of Linear Low Density Polyethylene (LLDPE)/Polysulfone (PSU) Polymer Blends by Functionalization of LLDPE 2019 Author(s) : Mohd Faizul Bin Mohd Sabri,Shaifulazuar Bin Rozali,Suriani Binti Ibrahim Source : Key Engineering Materials
22.	Optimised thermally driven molecular stability of an SCO metal complex for TEC Seebeck generation enhancement 2019 Author(s) : Suhana Binti Mohd Said,Noraisyah Binti Mohamed Shah,Mohd Faizul Bin Mohd Sabri,Mohd Faiz Bin Mohd Salleh Source : RSC Advances DOI : 10.1039/C9RA00779B
23.	Experimental Investigation of Thermal Stability and Enthalpy of Eutectic Alkali Metal Solar Salt Dispersed with MgO Nanoparticles 2019 Author(s) : Mohd Faizul Bin Mohd Sabri Source : International Journal of Technology DOI : 10.14716/ijtech.v10i6.3568
24.	Mechanical properties of superplastic thin boronised duplex stainless steel (DSS) 2019 Author(s) : Iswadi Bin Jauhari,Mohd Faizul Bin Mohd Sabri Source : Materials Research Express DOI : 10.1088/2053-1591/ab4f38
25.	Optimisation of octahedral iron(II) and cobalt(II) spin-crossover metal complex for thermoelectric application 2019 Author(s) : Azizah Binti Mainal,Mohd Faizul Bin Mohd Sabri,Tengku Faiz Bin Tengku Mohmed Noor Izam Source : Materials Chemistry and Physics DOI : https://doi.org/10.1016/j.matchemphys.2019.04.062
26.	Preparation and Characterization of Carbon Nanospheres Using Sugar as a Precursor 2019 Author(s) : Nik Nazri Bin Nik Ghazali,Mohd Faizul Bin Mohd Sabri,Shaifulazuar Bin Rozali,Suriani Binti Ibrahim,Tuan Zaharinie Binti Tuan Zahari Source : Key Engineering Materials
27.	Thermoelectric power battery using Al2O3 nanochannels of 10 nm diameter for energy harvesting of low-grade waste heat 2019 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Energy Conversion and Management DOI : 10.1016/j.enconman.2019.111979
28.	Amplified Spontaneous Emission and Optical Gain in Organic Single Crystal Quinquethiophene 2019 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Md Mahidur Rahman Sarker Source : Crystals DOI : 10.3390/cryst9120609
29.	Electrochemical corrosion behavior of Sn-0.7Cu solder alloy with the addition of bismuth and iron 2019 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Journal of Alloys and Compounds DOI : 10.1016/j.jallcom.2019.151925
30.	Preparation and Characterization of Electrochemical Deposition Cobalt Triantimonide (CoSb3) Thick Film: Effects of Polyvinyl Alcohol (PVA) as an Additive 2019 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Journal of Electronic Materials
31.	Crosslinked thermoelectric hydro-ionogels: A new class of highly conductive thermoelectric materials 2019 Author(s) : Nik Nazri Bin Nik Ghazali,Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Mohd Faiz Bin Mohd Salleh Source : Energy Conversion and Management DOI : 10.1016/j.enconman.2019.111813
32.	Improvement of Electrical Conductivity of PEMA Film by Incorporating EMITFSI and Carbon Based Nanofiller 2019 Author(s) : Nor Sabirin Binti Mohamed,Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Shaifulazuar Bin Rozali,Tengku Faiz Bin Tengku Mohmed Noor Izam,Mohd Faiz Bin Mohd Salleh Source : Organic Electronics DOI : 10.1016/j.orgel.2019.105562
33.	Influence of TiO2 layer's nanostructure on its thermoelectric power factor 2019 Author(s) : Suhana Binti Mohd Said,Mahazani Bin Mohamad,Mohd Faizul Bin Mohd Sabri,Mohd Faiz Bin Mohd Salleh Source : Applied Surface Science, DOI : 10.1016/j.apsusc.2019.143736
34.	Synthesis and characterization of novel p-type chemically cross-linked ionogels with high ionic seebeck coefficient for low-grade heat harvesting 2019 Author(s) : Nik Nazri Bin Nik Ghazali,Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Mohd Faiz Bin Mohd Salleh Source : Electrochimica Acta DOI : 10.1016/j.electacta.2019.134575
35.	Review of piezoelectric energy harvesting system and application of optimization techniques to enhance the performance of the harvesting system 2019 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Sabariah Binti Julai @ Julaihi,Md Mahidur Rahman Sarker Source : Sensors and Actuators: A. Physical DOI : 10.1016/j.sna.2019.111634
36.	Preparation and characterization of ZnO/ZnAl2O4-mixed metal oxides for dye-sensitized photodetector using Zn/Al-layered double hydroxide as precursor 2019 Author(s) : Khaulah @ Che Som Binti Sulaiman,Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Journal of Nanoparticle Research DOI : 10.1007/s11051-019-4501-x
37.	High stability and aging resistance Sn-1Ag-0.5Cu solder alloy by Fe and bi minor alloying 2019 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Shaifulazuar Bin Rozali Source : Microelectronic Engineering DOI : 10.1016/j.mee.2019.01.011
38.	Tribological Properties of Steel/Steel, Steel/DLC and DLC/DLC Contacts in the Presence of Biodegradable Oil 2019 Author(s) : Masjuki Bin Haji Hassan,Mohd Faizul Bin Mohd Sabri,Md. Abul Kalam Source : Journal of the Japan Petroleum Institute
39.	Enhancement of Thermoelectric Properties in Cold Pressed Nickel Doped Bismuth Sulfide Compounds 2018 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Shaifulazuar Bin Rozali,Mohd Faiz Bin Mohd Salleh Source : Electronic Materials Letters
40.	Thermal, structural, textural and optical properties of ZnO/ZnAl2O4 mixed metal oxide-based Zn/Al layered double hydroxide 2018 Author(s) : Khaulah @ Che Som Binti Sulaiman,Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Mohd Faiz Bin Mohd Salleh Source : Materials Research Express DOI : 10.1088/2053-1591/aadbca
41.	Tribological performance of DLC/DLC and steel/DLC contacts in the presence of additivated oil 2018 Author(s) : Masjuki Bin Haji Hassan,Mohd Faizul Bin Mohd Sabri,Md. Abul Kalam Source : International Journal of Surface Science and Engineering DOI : 10.1504/IJSURFSE.2018.090055
42.	Parametric analysis of ball milling condition on thermoelectric performance of Bi0. 6FeCo3Sb12 skutterudite 2018 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Shaifulazuar Bin Rozali,Mohd Faiz Bin Mohd Salleh Source : Materials Research Express
43.	Effect of aging on mechanical properties of Sn-Cu-Fe-Bi solder alloy 2018 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Shaifulazuar Bin Rozali Source : Solid State Science and Technology
44.	Facile hydrothermal method for synthesizing nitrogen-doped graphene nanoplatelets using aqueous ammonia: Dispersion, stability in solvents and thermophysical properties 2018 Author(s) : Mohd Faizul Bin Mohd Sabri,Shaifulazuar Bin Rozali,Mohd Nashrul Bin Mohd Zubir Source : Materials Research Express DOI : aab527 (2018)
45.	Evaluation on stability and thermophysical performances of covalently functionalized graphene nanoplatelets with xylitol and citric acid 2018 Author(s) : Mohd Faizul Bin Mohd Sabri,Shaifulazuar Bin Rozali,Mohd Nashrul Bin Mohd Zubir Source : Materials Chemistry and Physics DOI : 10.1016/j.matchemphys.2018.03.040
46.	Colloidal stability measurements of graphene nanoplatelets covalently functionalized with tetrahydrofurfuryl polyethylene glycol in different organic solvents 2018 Author(s) : Mohd Faizul Bin Mohd Sabri,Shaifulazuar Bin Rozali,Mohd Nashrul Bin Mohd Zubir Source : Current Applied Physics DOI : 10.1016/j.cap.2017.10.007
47.	In-Filled La0.5Co4Sb12 Skutterudite System with High Thermoelectric Figure of Merit 2018 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Mohd Faiz Bin Mohd Salleh Source : Journal of Electronic Materials DOI : 10.1007/s11664-018-6074-3
48.	The Role of Electrolyte Fluidity on The Power Generation Characteristics of Thermally Driven Electrochemical Cell 2018 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Ahmad Shuhaimi Bin Abu Bakar Source : Sains Malaysiana DOI : 10.17576/jsm-2018-4702-23
49.	Thermally Resistive Electrospun Composite Membranes for Low-Grade Thermal Energy Harvesting 2018 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Ahmad Shuhaimi Bin Abu Bakar Source : Macromolecular Materials and Engineering DOI : 10.1002/mame.201700482
50.	Enhancement of Thermoelectric Properties of Yb0.25Co4Sb12 Skutterudites through Ni Substitution 2018 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Sains Malaysiana DOI : 10.17576/jsm-2018-4701-21
51.	Microstructural and tensile properties of Fe and Bi added Sn-1Ag-0.5Cu solder alloy under high temperature environment 2018 Author(s) : Iswadi Bin Jauhari,Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Nazatul Liana Binti Sukiman Source : Microelectronics Reliability DOI : 10.1016/j.microrel.2018.01.015
52.	DFT studies of structural electronic correlation for the HAT6 discotic liquid crystal columnar stacking 2018 Author(s) : Suhana Binti Mohd Said,Azizah Binti Mainal,Mohd Faizul Bin Mohd Sabri,Mohammad Noh Bin Daud Source : Materials Research Express
53.	Investigation of the thermophysical properties and stability performance of non-covalently functionalized graphene nanoplatelets with Pluronic P-123 in different solvents 2018 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Materials Chemistry and Physics
54.	Structural, optical and electrical properties of ZnO/ZnAl2O4 nanocomposites prepared via thermal reduction approach 2018 Author(s) : Khaulah @ Che Som Binti Sulaiman,Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Journal of Materials Science DOI : 10.1007/s10853-017-1504-9
55.	Microstructural Modification of Sn-0.7Cu Solder Alloys by Fe/Bi-Addition for Achieving High Mechanical Performance 2017 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Journal of Electronic Materials DOI : 10.1007/s11664-017-5416-x
56.	Optimization of poly(vinylidene fluoride) membranes for enhanced power density of thermally driven electrochemical cells 2017 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Nur Awanis Binti Hashim,Ahmad Shuhaimi Bin Abu Bakar Source : Journal of Materials Science
57.	Tribological properties of hydrogen free DLC in self-mated contacts against ZDDP-added Oil 2017 Author(s) : Masjuki Bin Haji Hassan,Mohd Faizul Bin Mohd Sabri Source : Industrial Lubrication and Tribology DOI : 10.1108/ILT-11-2016-0269
58.	High impact reliability and high temperature performance of Fe and Bi added Sn-1Ag-0.5Cu solder alloys 2017 Author(s) : Iswadi Bin Jauhari,Norhayati Binti Soin,Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Nazatul Liana Binti Sukiman Source : Journal of Materials Science: Materials in Electronics
59.	Enhancement of Thermoelectric Behavior of La0.5Co4Sb12 x Te x Skutterudite Materials 2017 Author(s) : Nik Nazri Bin Nik Ghazali,Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Metallurgical and Materials Transactions A DOI : 10.1007/s11661-017-4058-1
60.	Development of Cutting Tool Through Superplastic Boronizing of Duplex Stainless Steel 2017 Author(s) : Iswadi Bin Jauhari,Mohd Faizul Bin Mohd Sabri Source : Metallurgical and Materials Transactions A DOI : doi:10.1007/s11661-016-3913-9
61.	Rapid preparation of bulk Al x Yb0.25Co4Sb12 (x = 0, 0.1, 0.2, 0.3) skutterudite thermoelectric materials with high figure of merit ZT = 1.36 2017 Author(s) : Masjuki Bin Haji Hassan,Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Journal of Materials Science
62.	Polymer electrolyte liquid crystal mixtures as phase-dependent thermoelectric materials 2017 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Shahrir Razey Bin Sahamir Source : Molecular Crystals and Liquid Crystals DOI : 10.1080/15421406.2016.1262668
63.	Structure-electronics relations of discotic liquid crystals from a molecular modelling perspective 2016 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Mohammad Noh Bin Daud,Nor Asrina Binti Sairi Source : Liquid Crystals
64.	Performance evaluation of a shell and tube heat exchanger operated with oxide based nanofluids 2016 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Heat and Mass Transfer
65.	Effects of the particle size and temperature on the efficiency of nanofluids using molecular dynamic simulation 2016 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Numerical Heat Transfer, Part A: Applications
66.	Development and Kinetics of TiB2 Layers on the Surface of Titanium Alloy by Superplastic Boronizing 2016 Author(s) : Iswadi Bin Jauhari,Mohd Faizul Bin Mohd Sabri,Nor Taibah Taazim Source : Metallurgical and Materials Transactions A
67.	A review on nanostructures of high-temperature thermoelectric materials for waste heat recovery 2016 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Renewable and Sustainable Energy Reviews
68.	Impact toughness, hardness and shear strength of Fe and Bi added Sn-1Ag-0.5Cu lead-free solders 2016 Author(s) : Iswadi Bin Jauhari,Mohd Faizul Bin Mohd Sabri,Nazatul Liana Binti Sukiman Source : Microelectronics Reliability
69.	Effect of temperature and alloying elements (Fe and Bi) on the electrical resistivity of Sn–0.7Cu solder alloy 2016 Author(s) : Mohd Faizul Bin Mohd Sabri,Shaifulazuar Bin Rozali Source : RSC Advances
70.	Experimental investigation on Al2O3-W, SiO2-W and ZnO-W nanofluids and their application in a shell and tube heat exchanger 2016 Author(s) : Mohd Faizul Bin Mohd Sabri Source : International Journal of Heat and Mass Transfer
71.	Effects of Fe and Bi Minor Alloying on Mechanical, Thermal, and Microstructural Properties of Sn-0.7Cu Solder Alloy 2016 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Irfan Anjum Magami Source : Journal of Electronic Materials
72.	Molecular dynamic simulation: studying the effects of Brownian motion and induced micro-convection in nanofluids 2016 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Numerical Heat Transfer, Part A: Applications
73.	Microhardness and shear performance of Fe/Bi-bearing SAC105 solder alloys under high temperature aging 2016 Author(s) : Iswadi Bin Jauhari,Mohd Faizul Bin Mohd Sabri,Nazatul Liana Binti Sukiman Source : Journal of Materials Science: Materials in Electronics DOI : DOI: 10.1007/s10854-016-5511-4
74.	Thermoelectric Properties of Microstructurally Modified CoSb3 Skutterudite by Hf-Addition 2016 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Journal of Electronic Materials
75.	Modeling of photodegradation process to remove the higher concentration of environmental pollution 2016 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Desalination and Water Treatment
76.	Synthesis of Cu3.21 Bi4.79 S9 Bismuth Chalcogenide by Mechanical Alloying 2016 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Powder Technology
77.	Microstructural Modification of Co4Sb12 Skutterudite Thermoelectric Material Through Al Exceed Doping 2016 Author(s) : Masjuki Bin Haji Hassan,Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Science of Advanced Materials
78.	High Thermal Gradient in Thermo-electrochemical Cells by Insertion of a Poly (Vinylidene Fluoride) Membrane 2016 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Nur Awanis Binti Hashim,Ahmad Shuhaimi Bin Abu Bakar Source : Scientific Reports
79.	Production of biodiesel from a non-edible source and study of its combustion, and emission characteristics: A comparative study with B5 2016 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Renewable Energy
80.	Impact of aluminium addition on the corrosion behaviour of Sn 1.0Ag 0.5Cu lead-free solder 2015 Author(s) : Rahizar Bin Ramli,Suhana Binti Mohd Said,Azuddin Bin Mamat,Mohd Faizul Bin Mohd Sabri Source : RSC Advances
81.	Enhancement of electronic protection to reduce e- waste 2015 Author(s) : Mohd Faizul Bin Mohd Sabri,Nor Asrina Binti Sairi Source : Journal of Industrial and Engineering Chemistry
82.	Magnetic, thermal, mesomorphic and thermoelectric properties of mononuclear, dimeric and polymeric iron(II) complexes with conjugated ligands 2015 Author(s) : Masjuki Bin Haji Hassan,Mohd Faizul Bin Mohd Sabri Source : RSC Advances
83.	Scheduling the blended solution as industrial CO2 absorber in separation process by backpropagation artificial neural networks 2015 Author(s) : Yatimah Binti Alias,Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Nor Asrina Binti Sairi Source : Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy
84.	Impact of aluminium addition on the corrosion behaviour of Sn1.0Ag0.5Cu lead-free solder 2015 Author(s) : Rahizar Bin Ramli,Suhana Binti Mohd Said,Azizah Binti Mainal,Azuddin Bin Mamat,Mohd Faizul Bin Mohd Sabri Source : RSC Advances
85.	Interfacial reactions between Cu substrate and Sn 1Ag 0.5 Cu solder containing 0.1 wt% Al by dipping method 2015 Author(s) : Iswadi Bin Jauhari,Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Journal of Materials Science: Materials in Electronics
86.	Gas sensing properties of zinc stannate (Zn2SnO4) nanowires prepared by carbon assisted thermal evaporation process 2015 Author(s) : Mohd Faizul Bin Mohd Sabri,A.s. Md. Abdul Haseeb,Wong Yew Hoong Source : Journal of Alloys and Compounds
87.	Fabrication and Characterization of Micro-Stacked PZT Actuator for MEMS Applications 2015 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Journal of Microelectromechanical Systems
88.	Wetting Characteristics of Al-containing Sn-1Ag- 0.5Cu Solder Alloy on Cu Substrate using Wetting Balance and Spread area Methods 2015 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Procedia Technology
89.	Molecular Dynamic Simulation on the Thermal Conductivity of Nanofluids in Aggregated and Non- Aggregated States 2015 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Numerical Heat Transfer, Part A: Applications
90.	Study on coarsening of Ag3Sn intermetallic compound in the Fe-modified Sn-1Ag-0.5Cu solder alloys 2015 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Irfan Anjum Magami Source : Journal of Alloys and Compounds
91.	The effect of iron and bismuth addition on the microstructural, mechanical, and thermal properties of Sn 1Ag 0.5 Cu solder alloy 2015 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Shaifulazuar Bin Rozali,Irfan Anjum Magami Source : Microelectronics Reliability
92.	Effect of thermal aging on the electrical resistivity of Fe-added SAC105 solder alloys 2015 Author(s) : Iswadi Bin Jauhari,Rahizar Bin Ramli,Hamzah Bin Arof,Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Microelectronics Reliability
93.	Deformation and fracture behaviour of electroplated Sn Bi/Cu solder joints 2015 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Journal of Materials Science
94.	Modeling and simulation of Metal Organic Halide Vapor Phase Epitaxy (MOHVPE) growth chamber 2015 Author(s) : Mohd Faizul Bin Mohd Sabri,Ahmad Shuhaimi Bin Abu Bakar Source : Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems
95.	Enhance protection of electronic appliances through multivariate modelling and optimization of ceramic core materials in varistor devices 2015 Author(s) : Mohd Faizul Bin Mohd Sabri Source : RSC Advances
96.	Ionic liquid entrapment by electrospun polymer nanofibre matrix as a high conductivity polymer electrolyte 2015 Author(s) : Suhana Binti Mohd Said,Amalina Binti Muhammad Afifi,Mohd Faizul Bin Mohd Sabri,Nur Awanis Binti Hashim Source : Rsc Advances
97.	Applicability of Alumina Nanofluid in Direct Absorption Solar Collectors 2015 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Applied Mechanics and Materials
98.	Deformation and fracture behaviour of electroplated Sn Bi/Cu solder joints 2015 Author(s) : Mohd Faizul Bin Mohd Sabri,A.s. Md. Abdul Haseeb,Goh Yingxin,Liew Haw Ling Source : Journal of Materials Science
99.	A DFT study on alkali atoms doped decahedral silver nanocluster for the potential application in opto- electronics and catalysis 2015 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Bui Duc Long Source : RSC Advances
100.	Spotlight on available optical properties and models of nanofluids: A review 2015 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Renewable and Sustainable Energy Reviews
101.	Investigation of Heat Transfer Performances of Nanofluids Flow through a Circular Minichannel Heat Sink for Cooling of Electronics 2014 Author(s) : Mohd Faizul Bin Mohd Sabri
102.	Global Effects of MWCNT-W Nanofluid in a Shell & Tube Heat Exchanger 2014 Author(s) : Mohd Faizul Bin Mohd Sabri Source : ADVANCED MATERIAL RESEARCH
103.	Microstructure of Sn 1Ag 0.5Cu solder alloy bearing Fe under salt spray test 2014 Author(s) : Rahizar Bin Ramli,Mohd Faizul Bin Mohd Sabri Source : Microelectronics Reliability
104.	A comparative review on the specific heat of nanofluids for energy perspective 2014 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Renewable and Sustainable Energy Reviews
105.	Enhanced Ethanol Gas Sensing Properties of SnO2- Core/ZnO-Shell Nanostructures 2014 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Sensors
106.	Catalyst free Single-Step fabrication of SnO2/ZnO core- shell nanostructures 2014 Author(s) : Mohd Faizul Bin Mohd Sabri,A.s. Md. Abdul Haseeb,Tharsika Thabothanayakam Source : Ceramics International
107.	Tribological Characteristics of Tetrahedral (ta-C) DLC Coating in the Presence of Commercial Lubricating Oil 2014 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Applied Mechanics and Materials
108.	Thermoelectric Potential of Polymer-Scaffolded Ionic Liquid Membranes 2014 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Robi Shankar Datta Source : JOURNAL OF ELECTRONIC MATERIALS
109.	Electrical Resistivity of Fe-bearing Sn1Ag0.5Cu Lead-Free Solder Alloys 2014 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Nur Aishah Aminah ,Dhafer Abdulameer Shnwah Source : ADVANCED MATERIAL RESEARCH
110.	A review on thermoelectric renewable energy: principle parameters that affect their performance 2014 Author(s) : Masjuki Bin Haji Hassan,Suhana Binti Mohd Said,Mahazani Bin Mohamad,Mohd Faizul Bin Mohd Sabri,Mohamed Hamid Elsheikh,Mohamed Bashir Ali Bashir Source : Renewable & Sustainable Energy Reviews
111.	Energy and Environmental Effects of Shell and Tube Heat Exchanger by Using Nanofluid as a Coolant 2014 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Journal of Chemical Engineering of Japan
112.	Effects of Aging on Sn-1Ag-0.5Cu Solder Alloys Containing 0.1 wt.% and 0.5 wt% Al 2014 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Dhafer Abdulameer Shnwah Source : Alloys and Compounds
113.	Photoluminescence Studies on Spray Pyrolysis Deposited ZnO-SnO2 Mixed Thin Films 2014 Author(s) : Mohd Faizul Bin Mohd Sabri
114.	Effectiveness Study of a Shell and Tube Heat Exchanger Operated with Nanofluids at Different Mass Flow Rates 2014 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Numerical Heat Transfer, Part A: Applications
115.	Structural and optical properties of ZnO SnO2 mixed thin films deposited by spray pyrolysis 2014 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Thin Solid Films
116.	An experimental investigation of heat transfer enhancement of a minichannel heat sink using Al2O3�H2O nanoﬂuid 2014 Author(s) : Mohd Faizul Bin Mohd Sabri
117.	Effect of Ag content and the minor alloying element Fe on the electrical resistivity of Sn-Ag-Cu solder alloy 2014 Author(s) : Hamzah Bin Arof,Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Journal of Alloys and Compounds
118.	Modeling of A High Force Density Fishbone Shaped Electrostatic Comb Drive Microactuator 2014 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : The Scientific World Journal
119.	Recent Advances on Mg2Si1-xSnx Materials for Thermoelectric Generation 2014 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Dhafer Abdulameer Shnawah,Mohamed Bashir Ali,Mohamed Hamid Elsheikh Source : Renewable & Sustainable Energy Reviews
120.	Co-synthesis of ZnO/SnO2 mixed nanowires via a single- step carbothermal reduction method 2014 Author(s) : Mohd Faizul Bin Mohd Sabri,A.s. Md. Abdul Haseeb,Tharsika Thabothanayakam Source : Ceramics International
121.	A time variant investigation on optical properties of water based Al2O3 nanofluid 2014 Author(s) : Mohd Faizul Bin Mohd Sabri,Mohammad Sajid Hossain Source : International Communications in Heat and Mass Transfer
122.	A Review on the Fabrication of Polymer-Based Thermoelectric Materials and Fabrication Methods 2013 Author(s) : Mohd Faizul Bin Mohd Sabri,Shahrir Razey Sahamir,Muhammad Akmal Kamarudin Source : The Scientific World Journal
123.	Microstructural stability of Sn1Ag0.5CuxAl (x = 1, 1.5, and 2 wt.%) solder alloys and the effects of high- temperature aging on their mechanical properties 2013 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Irfan Anjum Magami Source : Materials Characterization
124.	Effect of Ag Content and the Minor Alloying Element Fe on the Mechanical Properties and Microstructural Stability of Sn-Ag-Cu Solder Alloy Under High- Temperature Annealing 2013 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Journal of Electronic Materials
125.	Controlling parameters of focused ion beam (FIB) on high aspect ratio micro holes milling 2013 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri Source : Microsystem Technologies
126.	Investigation of the geometry modeling of metal organic halide vapor phase epitaxy (MOHVPE) reactor 2013 Author(s) : Mohd Faizul Bin Mohd Sabri,Ahmad Shuhaimi Bin Abu Bakar Source : Advanced Material Research
127.	Investigation on high aspect ratio microholes on silicon by FIB/SEM milling 2013 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Advanced Materials Research
128.	Accreditation of engineering programs: An evaluation of current practices in Malaysia 2013 Author(s) : Rahizar Bin Ramli,Suhana Binti Mohd Said,Chow Chee Onn,Mohd Faizul Bin Mohd Sabri Source : International Journal of Technology and Design Education
129.	Electrodeposition of Lead-free solder alloys 2013 Author(s) : Mohd Faizul Bin Mohd Sabri,A.s. Md. Abdul Haseeb,Goh Yingxin Source : Soldering & Surface Mount Technology
130.	Investigating the Heat Transfer Performance and Thermophysical Properties of Nanofluids in a Circular Micro-channel 2013 Author(s) : Mohd Faizul Bin Mohd Sabri,Saidur Rahman Abdul Hakim
131.	Effects of Hydroquinone and Gelatin on the Electrodeposition of Sn-Bi Low Temperature Pb- Free Solder 2013 Author(s) : Mohd Faizul Bin Mohd Sabri,A.s. Md. Abdul Haseeb,Goh Yingxin Source : Electrochimica Acta
132.	Fabrication of a Si-PZT Hybrid XY-Microstage with CNT-Carbon Hinges 2012 Author(s) : Mohd Faizul Bin Mohd Sabri Source : IEEJ Transactions on Sensors and Micromachines
133.	A review on effect of minor alloying elements on thermal cycling and drop impact reliability of low-Ag Sn-Ag-Cu solder joints 2012 Author(s) : Mohd Faizul Bin Mohd Sabri Source : MICRO: International Symposium on Microarchitecture
134.	Novel Fe-containing Sn 1Ag 0.5Cu lead-free solder alloy with further enhanced elastic compliance and plastic energy dissipation ability for mobile products 2012 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Microelectronics Reliability
135.	A review on thermal cycling and drop impact reliability of SAC solder joint in portable electronic products 2012 Author(s) : Mohd Faizul Bin Mohd Sabri,Irfan Anjum Magami Source : Microelectronics Reliability
136.	Microstructure, mechanical, and thermal properties of the Sn-1Ag-0.5Cu solder alloy bearing Fe for electronics applications 2012 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Irfan Anjum Magami Source : Materials Science & Engineering A
137.	High-Reliability Low-Ag-Content Sn-Ag-Cu Solder Joints for Electronics Applications 2012 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Journal of ELECTRONIC MATERIALS
138.	The bulk alloy microstructure and tensile properties of Sn-1Ag-0.5Cu-xAl lead-free solder alloys (x=0, 1, 1.5 and 2 wt.%) 2012 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Microelectronics International
139.	The bulk alloy microstructure and mechanical properties of Sn1Ag0.5CuxAl solders (x = 0, 0.1 and 0.2 wt. %) 2012 Author(s) : Mohd Faizul Bin Mohd Sabri Source : J Mater Sci: Mater Electron
140.	Microstructure and Tensile Properties of Sn- 1Ag-0.5Cu Solder Alloy Bearing Al for Electronics Applications 2012 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Journal of Electronic Materials
141.	The Limited Reliability of Board-Level SAC Solder Joints under both Mechanical and Thermo-mechanical Loads 2012 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Informacije Midem-Journal of Microelectronics Electronic Components and Materials
142.	A review on thermal cycling and drop impact reliability of solder joints in electronic Packages 2011 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Informacije midem-journal of Microelectronics electronic components and materials
143.	Modeling and experimental validation of the performance of a silicon XY-microstage driven by PZT actuators 2009 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Journal of Micromechanics and Microengineering
144.	Microassembly of PZT actuators into silicon microstructures 2009 Author(s) : Mohd Faizul Bin Mohd Sabri Source : IEEJ Transactions on Sensors and Micromachines
145.	Monolithic PZT Multi-Axis Microstage 2009 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Material Integration
146.	Second law analysis for optimal thermal design of radial fin geometry by convection 2007 Author(s) : Mohd Faizul Bin Mohd Sabri Source : International Journal of Applied Thermal Engineering
147.	A low cost solution for post-biopsy complications using available RFA generator and coaxial core biopsy needle 2007 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Australasian Physical & Engineering Sciences in Medicine
148.	Exergy analysis of evaporative cooling for reducing energy use in a Malaysian building 2007 Author(s) : Mohd Faizul Bin Mohd Sabri Source : Desalination
149.	Microstructure and Mechanical Propersties of Sintered Zirconia Produced by Injection Moulding Process 2006 Author(s) : Mohd Faizul Bin Mohd Sabri Source : International Journal of Mechanical and Materials Engineering
150.	The government-industry-university relationship towards a knowledge-based economy 2005 Author(s) : Mohd Faizul Bin Mohd Sabri Source : AEESEAP Journal of Engineering Education

BOOK

NO	DETAILS OF BOOK
1.	Alloying Modification of Low-Ag-Content Sn-Ag-Cu Solders 2015 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri
2.	Reka Bentuk Elemen dan Sistem Mekanik 2007 Author(s) : Mohd Faizul Bin Mohd Sabri
3.	Enhancing Engineering Education and Training: A University-Industry-Government Partnership 2003 Author(s) : Mohd Faizul Bin Mohd Sabri

CHAPTER IN BOOK

NO	DETAILS OF CHAPTER IN BOOK
1.	Biosynthesis of Copper Oxide Nanoparticles Using Camellia Sinensis Plant Powder 2020 Author(s) : Nik Nazri Bin Nik Ghazali,Mohd Faizul Bin Mohd Sabri,Shaifulazuar Bin Rozali,Suriani Binti Ibrahim,Mohd Sayuti Bin Ab Karim
2.	Biopolymers From Crop Plants 2019 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Shaifulazuar Bin Rozali,Suriani Binti Ibrahim
3.	Corrosion detection for natural/synthetic/textiles fiber polymer composites 2019 Author(s) : Roslina Binti Ahmad,Amalina Binti Muhammad Afifi,Mohd Faizul Bin Mohd Sabri,Nor Ishida Binti Zainal Abidin,Katayoon Kalantari
4.	High-Temperature Lead-free Solder Materials and Applications 2019 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri
5.	Ferroelectrics and Their Applications 2017 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri,Mohd Faiz Bin Mohd Salleh
6.	Introduction to Organic Thermoelectric Materials and Devices 2016 Author(s) : Suhana Binti Mohd Said,Mohd Faizul Bin Mohd Sabri
7.	PZT Driven Micro XY Stage 2010 Author(s) : Mohd Faizul Bin Mohd Sabri

PROCEEDING

NO	DETAILS OF PROCEEDING
1.	Performance analysis for Peltier module and Seebeck module using Matlab/Simulink 2018 Author(s) : Mohd Faizul Bin Mohd Sabri
2.	Temperature Dependence of Electrical Conduction in PEMA-EMITFSI Film 2018 Author(s) : Mohd Faizul Bin Mohd Sabri,Mohd Faiz Bin Mohd Salleh
3.	Seebeck coefficient of Synthesized Titanium Dioxide Thin Film on FTO Glass Substrate 2018 Author(s) : Mohd Faizul Bin Mohd Sabri,Mohd Faiz Bin Mohd Salleh
4.	Multiscale simulation of thermoelectric generation (TEG) devices for waste heat conversion 2013 Author(s) : Mohd Faizul Bin Mohd Sabri
5.	Fabrication of Thermoelectric Materials through Electroplating for Green Technology Applications 2012 Author(s) : Mohd Faizul Bin Mohd Sabri
6.	Microstructural Stability and Mechanical Properties of Sn-1Ag-0.5Cu Solder Alloy With 0.1 wt.% Al Addition Under High-Temperature Annealing 2012 Author(s) : Mohd Faizul Bin Mohd Sabri
7.	Effects of hydroquinone and gelatin on the electrodeposition of SnBi low temperature Pb-free solder 2012 Author(s) : Mohd Faizul Bin Mohd Sabri,A.s. Md. Abdul Haseeb,Goh Yingxin
8.	A Compliant Lead-Free Solder Alloy 2012 Author(s) : Mohd Faizul Bin Mohd Sabri,Dhafer Abdulameer Shnawah
9.	High Reliability and Low Cost Al/Fe added Lead Free SAC Solder 2011 Author(s) : Mohd Faizul Bin Mohd Sabri
10.	High power density microactuator for MEMS applications 2010 Author(s) : Mohd Faizul Bin Mohd Sabri
11.	A large displacement piezodriven silicon XY- microstage 2009 Author(s) : Mohd Faizul Bin Mohd Sabri
12.	A Si-PZT Hybrid XY-Microstage Utilizing an Actuator Amplification Mechanism 2008 Author(s) : Mohd Faizul Bin Mohd Sabri
13.	Fabrication and Integration of a Si-PZT Hybrid XY- microstage 2008 Author(s) : Mohd Faizul Bin Mohd Sabri
14.	Silicon XY-stage Actuated by Stacked PZT Actuators 2008 Author(s) : Mohd Faizul Bin Mohd Sabri
15.	A Si-PZT Hybrid XY-Microstage for High-density Data Storage 2007 Author(s) : Mohd Faizul Bin Mohd Sabri
16.	Design and Development of Si-PZT Hybrid XY-Microstage 2007 Author(s) : Mohd Faizul Bin Mohd Sabri
17.	An adapter for post-biopsy radiofrequency characterization 2006 Author(s) : Mohd Faizul Bin Mohd Sabri
18.	Study of lubricant viscosity from a diesel engine operating on various percentages of coconut oil blended fuel 2005 Author(s) : Mohd Faizul Bin Mohd Sabri
19.	Optimization Of Radial Convective Radiating Fin Geometry For Single Cylinder Internal Combustion Engine (ICE): Entropy Generation Minimization 2005 Author(s) : Mohd Faizul Bin Mohd Sabri
20.	Optimization Of Radial Convective Radiating Fin Geometry For Single Cylinder Internal Combustion Engine (ICE): Entropy Generation Minimization 2005 Author(s) : Mohd Faizul Bin Mohd Sabri
21.	Flash Temperature Parameter Number Prediction Model by Design of Tribological Experiments for Basestock Mineral Oil Containing Palm Olein and Aminephosphate Additives 2005 Author(s) : Mohd Faizul Bin Mohd Sabri
22.	Thermal Analysis of Diesel Engine Cylinder Head Carbon Deposits while Fueled by Diesel Fuel Water Emulsion 2005 Author(s) : Mohd Faizul Bin Mohd Sabri

OTHERS

NO	DETAILS OF OTHERS
1.	KITAMIKOUDAI NO OMAIDE 2010 Author(s) : Mohd Faizul Bin Mohd Sabri
2.	THE WALL OF CULTURE IN ASIA 2003 Author(s) : Mohd Faizul Bin Mohd Sabri
3.	Nihon, Dai 2 no Bokoku 1999 Author(s) : Mohd Faizul Bin Mohd Sabri

RESEARCH PROJECT

GRANT	PROGRESS	STATUS
Development Of A Piezoelectric Energy Harvesting System Using Optimization Algorithms For Performance Efficiency Enhancement In Micro-devices Application Researcher(s) : Dr. Mohd Faiz Bin Mohd Salleh,Associate Prof. Dr. Suhana Binti Mohd Said,Dr. Sabariah Binti Julai @ Julaihi,Dr. Md Mahidur Rahman Sarker (RU Geran - Fakulti Program)		on going
Development Of Nanostructured Chalcogenide Thermoelectric Materials By Electrodeposition Researcher(s) : Dr. Shaifulazuar Bin Rozali,Dr. Mohd Faiz Bin Mohd Salleh (RU Geran - Fakulti Program)		on going
Design And Development Of A Cooling System Using Peltier Module (RU Geran)		end
Investigation of Physical and Chemical Interfacial Properties for Fourth Element Added SAC Solder using Micro Solder Balls Researcher(s) : Dr. Shaifulazuar Bin Rozali,Dr. Nor Ishida Binti Zainal Abidin,Mohammad Hossein Mahdavifard (Government Agency)		end
Potential For Thermoelectric And Batteries Research (International Funding)		end
Kinetic Study Of In-pipe Water Flow For Power Generation Researcher(s) : Associate Prof. Dr. Suhana Binti Mohd Said,Dr. Iswadi Bin Jauhari,Associate Prof. Ir. Dr. Nik Nazri Bin Nik Ghazali (Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC)))		end
Fabrication of Donor-Acceptor Polymer System for Thermoelectric Performance Researcher(s) : Iman Binti Aris Fadzallah (Postgraduate Research Grant (PPP) - Research)		end
Fabrication and thermoelectric properties of skutterudite (Co,Fe)Sb3 thin films via ion beams sputtering deposition for high temperature energy harvesting devices Researcher(s) : Nuur Syahidah Bt Sabran (Postgraduate Research Grant (PPP) - Research)		end
Fabrication and Structural Analysis of Zn/Al-NO3 and Zn/Al/Cd-NO3 Layered Double Hydroxide nanorod arrays for Dye-Sensitized Solar Cells Researcher(s) : Ethar Yahya Salih (Postgraduate Research Grant (PPP) - Research)		end
Incorporation of nanoparticles in biomaterials for thermoelectric device by electrospinning. Researcher(s) : Mohammad Mamunur Rashid (Postgraduate Research Grant (PPP) - Research)		end
Tribological properties of ta-C DLC in presence of vegetable oil under boundary conditions Researcher(s) : Abdul Mannan (Postgraduate Research Grant (PPP) - Research)		end
Characterization of Iron and Bismuth added low-Ag-Content SAC lead free solders in severe thermal and mechanical environments Researcher(s) : Bakhtiar Ali (Postgraduate Research Grant (PPP) - Research)		end
Effect of Minor Alloying Elements (Fe and Bi) on the Oxidation Behavior and Electrical Properties of Sn-0.7Cu Solder Alloys Researcher(s) : Syed Hassan Abbas Jaffery (Postgraduate Research Grant (PPP) - Research)		end
Development Of Organic Thermoelectric Material Utilizing Conjugated Polymers And Ionic Liquids Researcher(s) : Associate Prof. Ir. Dr. Nik Nazri Bin Nik Ghazali (Bantuan Khas Penyelidikan (BKP Special))		end
Investigation on Mechanical, Interfacial and Microstructural Properties of Lead-free Solder by Adding Fe and Bi Researcher(s) : Mohammad Hossein Mahdavifard (Postgraduate Research Grant (PPP) - Research)		end
Fundamental Studies On The Nanostructured Fe-sb And Co-sb Skutterudites Thermoelectric Materials For High Temperature Energy Harvesting Researcher(s) : Associate Prof. Dr. Suhana Binti Mohd Said,Associate Prof. Ir. Dr. Nik Nazri Bin Nik Ghazali,Dr. Dhafer Abdulameer Shnawah (Fundamental Research Grant Scheme (FRGS))		end
Mechanical And Microstructural Characteristics Of Element Added Sac Solder Alloy. (Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC)))		end
Fabrication and characterization of novel thermoelectric material Mg2(Si0.4Sn0.6)1-x Nx,(N= In, Ge, Ti, Al) through hot pressing Researcher(s) : Mohamed Bashir Ali Bashir (Postgraduate Research Grant (PPP) - Research)		end
Fundamental Studies Of Incorporation Of Nanoparticles In Biomaterials For Thermoelectric Device By Electrospinning (Fundamental Research Grant Scheme (FRGS))		end
Fabrication Of Thermoelectric Material Through Inkjet Printing Researcher(s) : Mohamed Hamid Elsheikh Yousef (Postgraduate Research Grant (PPP) - Research)		end
The Tribological Behavior Comparison Of These Dlc Surfaces After The Wear Tests (Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC)))		end
Geran Sanjungan Penyelidikan-mo013-2013 (Others MOHE)		end
NEW METHOD OF FORMING HIGH ASPECT RATIO MICROSTRUCTURE USING METAL NANOPOWER (Postgraduate Research Grant (PPP) - Research)		end

RESEARCH COLLABORATOR

GRANT	PROGRESS	STATUS
Correlations Between Processing Parameters And Graphene Formation From Vegetable Oils Under Simple Step Microwave Assisted Arc In Liquid Method Researcher(s) : Associate Prof. Ir. Dr. Mohd Faizul Bin Mohd Sabri,Associate Prof. Ir. Dr. Ching Yern Chee,Dr. Suriani Binti Ibrahim,Dr. Mohd Nashrul Bin Mohd Zubir,Nor Afifah Binti Yahaya (Fundamental Research Grant Scheme (FRGS))		on going
Microstructure And Mechanical Properties Of Sn-bi-co Low Temperature Solder Alloy Researcher(s) : Prof. Dr. A.s. Md. Abdul Haseeb,Associate Prof. Ir. Dr. Mohd Faizul Bin Mohd Sabri (RU Geran - Fakulti Program)		on going
Effects Of Nanofiller' Shape And Surface Chemistry On Beta Phase Formation And Piezoelectric Performance In Electrospun Polyvinylidene Fluoride Based Nanocomposites Researcher(s) : Associate Prof. Ir. Dr. Mohd Faizul Bin Mohd Sabri,Associate Prof. Dr. Amalina Binti Muhammad Afifi (RU Geran - Fakulti Program)		on going
Innovative Approach In Converting Mixed Plastic Waste Into Fuel Via Microwave Assisted Spark Pyrolysis Process To Increase Efficency And Yield Researcher(s) : Associate Prof. Ir. Dr. Mohd Faizul Bin Mohd Sabri,Dr. Suriani Binti Ibrahim,Dr. Mohd Nashrul Bin Mohd Zubir,Dr. Yose Fachmi Buys,Dr. Muhamad Fazly Bin Abdul Patah (Others MOHE - Top 100 (IIRG)-IISS)		on going
Fundamnetal Investigation On Basic Parameters In Producing Nanocarbon Materials From Vegetable Oils Via Novel Simple Step Arc In Liquid Method. Researcher(s) : Associate Prof. Ir. Dr. Mohd Faizul Bin Mohd Sabri,Dr. Suriani Binti Ibrahim,Dr. Mohd Faiz Bin Mohd Salleh (RU Geran - Fakulti Program)		on going
Rational Molecular Design Of Ternary And Quarternary Skutterudites As High Performance Thermoelectric Materials For Waste Heat Energy Harvesting Researcher(s) : Dr. Sabariah Binti Julai @ Julaihi,Associate Prof. Ir. Dr. Mohd Faizul Bin Mohd Sabri,Dr. Mohd Faiz Bin Mohd Salleh,Dr. Marizan Binti Mubin,Professor Dr. Yuzuru Miyazaki (UM Grant - Frontier Research Grant)		on going
Development Of Smart System With Sensor For Production Output Monitoring Researcher(s) : Associate Prof. Ir. Dr. Mohd Faizul Bin Mohd Sabri,Mr. Mahazani Bin Mohamad,Dr. Mohamad Sofian Bin Abu Talip (RU Geran)		end
Synergistic Effect Of Nanographene On Rheology And Lubricating Mechanism Of Biobased Lubricant Researcher(s) : Associate Prof. Ir. Dr. Mohd Faizul Bin Mohd Sabri,Professor Ir. Dr. Masjuki Bin Haji Hassan,Dr. Nazatul Liana Binti Sukiman,Jumat Bin Salimon,Robiah Binti Yunus (Fundamental Research Grant Scheme (FRGS))		end
Determination, Optimization And Fabrication Of Nano-textures On Solar Absorber Surface For Spectral Selectivity Researcher(s) : Associate Prof. Ir. Dr. Nik Nazri Bin Nik Ghazali,Associate Prof. Ir. Dr. Mohd Faizul Bin Mohd Sabri,Dr. Nor Afifah Binti Yahaya,Associate Professor Dr. Tadachika Nakayama (Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC)))		end
Molecular design of thermoelectric structures using the QSAR (Quantitative structure –activity relationship) methodology Researcher(s) : Dr. Mohd Faiz Bin Mohd Salleh,Associate Prof. Ir. Dr. Mohd Faizul Bin Mohd Sabri (Fundamental Research Grant Scheme (FRGS))		end
Fundamental Investigation Of High Efficiency Biopolymer Based Thermoelectric Materials As Waste Heat Energy Harvester. Researcher(s) : Associate Prof. Ir. Dr. Mohd Faizul Bin Mohd Sabri,Professor Ir. Dr. Masjuki Bin Haji Hassan,Associate Prof. Dr. Roslina Binti Ahmad,Abdul Hadi (Fundamental Research Grant Scheme (FRGS))		end
Analysis And Modeling Of Insect Flight Kinematics For Emulation In Biomimetic Micro Air Vehicles Researcher(s) : Prof. Dr. Norhayati Binti Soin,Associate Prof. Ir. Dr. Chong Wen Tong,Associate Prof. Ir. Dr. Mohd Faizul Bin Mohd Sabri (Geran Penyelidikan Universiti Malaya (UMRG) - AET (Innovative Technology (ITRC)))		end
Incorporation of gamat-loaded chitosan into biomimetic hydroxyapatite (HA) nanolayer superplastically embedded on titanium for medical implant application. Researcher(s) : Associate Prof. Ir. Dr. Mohd Faizul Bin Mohd Sabri (Geran Penyelidikan Universiti Malaya (UMRG) - AET (Innovative Technology (ITRC)))		end

MAIN LINKS

RESOURCES

RELATED LINKS