ARTICLE IN ACADEMIC JOURNALS
| NO | DETAILS OF ARTICLE IN ACADEMIC JOURNALS |
|---|---|
| 1. |
Occupational health and Safety for Sewing Machine Operators in Pakistan: Revealing Hazards in Small and Medium Garment Enterprises
2025
Source :
JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH
DOI :
10.56042/jsir.v84i8.12916
|
| 2. |
A structural equation modeling approach to investigating the influence of smart kitchen appliance design features on older adults' technology acceptance
2025
Source :
ARCHIVES OF GERONTOLOGY AND GERIATRICS
DOI :
10.1016/j.archger.2025.105781
|
| 3. |
Development of a decision model for the selection of exoskeletons for application in automotive production plants
2025
Author(s) : Raja Ariffin Bin Raja Ghazilla, Yap Hwa Jen Source :
PLOS ONE
DOI :
10.1371/journal.pone.0333420
|
| 4. |
A Systematic Review of the Usability of Telemedicine Interface Design for Older Adults
2025
Source :
APPLIED SCIENCES-BASEL
DOI :
10.3390/app15105458
|
| 5. |
Ergonomic assessment of a multi-joint actuated lower extremity exoskeleton to assist dynamic lifting and carrying tasks
2025
Author(s) : Raja Ariffin Bin Raja Ghazilla, Yap Hwa Jen Source :
SCIENTIFIC REPORTS
DOI :
10.1038/s41598-025-14747-w
|
| 6. |
AN EXPLORATORY OBSERVATION INTO THE STATUS OF COLLABORATIVE MANUFACTURING FOR TOOL AND DIE DEVELOPMENT IN MALAYSIA
2024
Author(s) : Raja Ariffin Bin Raja Ghazilla, Azuddin Bin Mamat Source :
INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING-THEORY APPLICATIONS AND PRACTICE
DOI :
10.23055/ijietap.2024.31.2.9775
|
| 7. |
Industrial practitioner's perception on the application of exoskeleton system in automotive assembly industries: A Malaysian case study
2024
Author(s) : Raja Ariffin Bin Raja Ghazilla, Yap Hwa Jen Source :
HELIYON
DOI :
10.1016/j.heliyon.2024.e26183
|
| 8. |
ANALYSIS OF HUMAN FACTOR RISKS IN OFFSHORE PLATFORMS USING HUMAN FACTORS-FAILURE MODE AND EFFECT ANALYSIS (HF-FMEA)
2024
Author(s) : Raja Ariffin Bin Raja Ghazilla, Yap Hwa Jen Source :
INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING-THEORY APPLICATIONS AND PRACTICE
DOI :
10.23055/ijietap.2024.31.6.9953
|
| 9. |
A model for end-of-life recovery in the automotive sector in Malaysia
2024
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
SUSTAINABLE PRODUCTION AND CONSUMPTION
DOI :
10.1016/j.spc.2024.02.020
|
| 10. |
An analysis of the effect of syringe barrel volume on performance and user perception
2023
Author(s) : Raja Ariffin Bin Raja Ghazilla, Azuddin Bin Mamat, Muhammad Khairi Faiz Bin Ahmad Hairuddin Source :
MEDICINE
DOI :
10.1097/MD.0000000000033983
|
| 11. |
Design and Characterization of a Low-Cost and Efficient Torsional Spring for ES-RSEA
2023
Author(s) : Raja Ariffin Bin Raja Ghazilla, Yap Hwa Jen Source :
SENSORS
DOI :
10.3390/s23073705
|
| 12. |
Deep learning method for risk identification under multiple physiological signals and PAD model
2022
Source :
MICROPROCESSORS AND MICROSYSTEMS
DOI :
10.1016/j.micpro.2021.104393
|
| 13. |
The hypodermic syringe performance based on the ISO 7886-1:2017: A narrative review
2022
Author(s) : Raja Ariffin Bin Raja Ghazilla, Azuddin Bin Mamat, Muhammad Khairi Faiz Bin Ahmad Hairuddin Source :
MEDICINE
DOI :
10.1097/MD.0000000000031812
|
| 14. |
Vehicle Driving Risk Prediction Model by Reverse Artificial Intelligence Neural Network
2022
Author(s) : Ramesh A/l T. Subramaniam, Raja Ariffin Bin Raja Ghazilla, Ramesh Singh A/l Kuldip Singh Source :
COMPUTATIONAL INTELLIGENCE AND NEUROSCIENCE
DOI :
10.1155/2022/3100509
|
| 15. |
Design Methods for the Elderly in Web of Science, Scopus, and China National Knowledge Infrastructure Databases: A Scientometric Analysis in CiteSpace
2022
Source :
SUSTAINABILITY
DOI :
10.3390/su14052545
|
| 16. |
Industrial practices of collaborative manufacturing involving tool and die development: Malaysian perspective
2021
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT
|
| 17. |
What Key Drivers Are Needed to Implement Material Efficiency Strategies? An Analysis of the Electrical and Electronic Industry in Malaysia and Its Implications to Practitioners
2021
Source :
SUSTAINABILITY
DOI :
10.3390/su13042065
|
| 18. |
Industrial practices of collaborative manufacturing involving tool and die development: Malaysian perspective
2021
Author(s) : Raja Ariffin Bin Raja Ghazilla, Azuddin Bin Mamat Source :
JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT
DOI :
10.1108/JMTM-07-2019-0266
|
| 19. |
What Key Drivers Are Needed to Implement Material Efficiency Strategies? An Analysis of the Electrical and Electronic Industry in Malaysia and Its Implications to Practitioners
2021
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
SUSTAINABILITY
|
| 20. |
Integrating green affective values and material selection in automotive design: A preliminary study
2020
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
International Journal of Integrated Engineering
|
| 21. |
Balance and stability issues in lower extremity exoskeletons: A systematic review
2020
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
BIOCYBERNETICS AND BIOMEDICAL ENGINEERING
|
| 22. |
Physical ergonomics awareness in an offshore processing platform among Malaysian oil and gas workers
2020
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
INTERNATIONAL JOURNAL OF OCCUPATIONAL SAFETY AND ERGONOMICS
|
| 23. |
Balance and stability issues in lower extremity exoskeletons: A systematic review
2020
Source :
BIOCYBERNETICS AND BIOMEDICAL ENGINEERING
DOI :
10.1016/j.bbe.2020.09.004
|
| 24. |
Human factors engineering integration in the offshore OG industry: A review of current state of practice
2020
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
SAFETY SCIENCE
|
| 25. |
Physical ergonomics awareness in an offshore processing platform among Malaysian oil and gas workers
2020
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
INTERNATIONAL JOURNAL OF OCCUPATIONAL SAFETY AND ERGONOMICS
DOI :
10.1080/10803548.2018.1480341
|
| 26. |
Human factors engineering integration in the offshore OG industry: A review of current state of practice
2020
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Safety Science
|
| 27. |
Human factors engineering integration in the offshore OG industry: A review of current state of practice
2020
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
SAFETY SCIENCE
|
| 28. |
Comparison Study of Malaysian Driver Seating Position in SAEJ1517 Accommodation Model
2019
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
SAE International Journal of Passenger Cars - Mechanical Systems
|
| 29. |
Aftermarket survey on end-of-life vehicle recovery in Malaysia: Key findings
2019
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Journal of Cleaner Production
|
| 30. |
Aftermarket survey on end-of-life vehicle recovery in Malaysia: Key findings
2019
Source :
JOURNAL OF CLEANER PRODUCTION
|
| 31. |
Design and control of a wearable lower-body exoskeleton for squatting and walking assistance in manual handling works
2019
Author(s) : Raja Ariffin Bin Raja Ghazilla, Norhafizan Bin Ahmad Source :
Mechatronics
DOI :
https://doi.org/10.1016/j.mechatronics.2019.102272
|
| 32. |
Aftermarket survey on end-of-life vehicle recovery in Malaysia: Key findings
2019
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
JOURNAL OF CLEANER PRODUCTION
|
| 33. |
Resources sustainability through material efficiency strategies: An insight study of electrical and electronic companies
2019
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Resources
|
| 34. |
Design and control of a wearable lower-body exoskeleton for squatting and walking assistance in manual handling works
2019
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
MECHATRONICS
|
| 35. |
Design and control of a wearable lower-body exoskeleton for squatting and walking assistance in manual handling works
2019
Author(s) : Raja Ariffin Bin Raja Ghazilla, Yap Hwa Jen Source :
MECHATRONICS
DOI :
10.1016/j.mechatronics.2019.102272
|
| 36. |
End-of-life vehicle recovery factors: Malaysian stakeholders views and future research needs
2018
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Sustainable Development
|
| 37. |
Exoskeleton robot control for synchronous walking assistance in repetitive manual handling works based on dual unscented Kalman filter
2018
Source :
PLOS ONE
DOI :
10.1371/journal.pone.0200193
|
| 38. |
Economic order quantity models for items with imperfect quality and emission considerations
2018
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
International Journal of Systems Science: Operations and Logistics
|
| 39. |
Exoskeleton robot control for synchronous walking assistance in repetitive manual handling works based on dual unscented Kalman filter
2018
Author(s) : Raja Ariffin Bin Raja Ghazilla, Norhafizan Bin Ahmad Source :
PLOS ONE
|
| 40. |
Exoskeleton robot control for synchronous walking assistance in repetitive manual handling works based on dual unscented kalman filter
2018
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
PLoS ONE
|
| 41. |
End-of-life vehicle recovery factors: Malaysian stakeholders views and future research needs
2018
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
SUSTAINABLE DEVELOPMENT
|
| 42. |
Green product preferences with respect to cultural influences: Empirical study in indonesia
2018
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
International Journal of Automation Technology
|
| 43. |
End-of-life vehicle recovery factors: Malaysian stakeholders views and future research needs
2018
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
SUSTAINABLE DEVELOPMENT
|
| 44. |
Physical ergonomics awareness in an offshore processing platform among Malaysian oil and gas workers
2018
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
International Journal of Occupational Safety and Ergonomics
|
| 45. |
End‐of‐life vehicle recovery factors: Malaysian stakeholders' views and future research needs
2018
Source :
Sustainable Development
|
| 46. |
The impact of sustainable manufacturing practices on sustainability performance: Empirical evidence from Malaysia
2017
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
International Journal of Operations and Production Management
|
| 47. |
The impact of sustainable manufacturing practices on sustainability performance Empirical evidence from Malaysia
2017
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
INTERNATIONAL JOURNAL OF OPERATIONS PRODUCTION MANAGEMENT
|
| 48. |
Application of the NSGA-II algorithm to a multi-period inventory-redundancy allocation problem in a series-parallel system
2017
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Reliability Engineering and System Safety
|
| 49. |
A bi-objective multi-period series-parallel inventory-redundancy allocation problem with time value of money and inflation considerations
2017
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
COMPUTERS INDUSTRIAL ENGINEERING
|
| 50. |
A bi-objective multi-period series-parallel inventory-redundancy allocation problem with time value of money and inflation considerations
2017
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Computers and Industrial Engineering
|
| 51. |
SUSTAINABLE SUPPLY CHAIN MANAGEMENT IN MALAYSIAN SMEs: PERSPECTIVES FROM PRACTITIONERS
2017
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
ENVIRONMENTAL ENGINEERING AND MANAGEMENT JOURNAL
|
| 52. |
The impact of sustainable manufacturing practices on sustainability performance Empirical evidence from Malaysia
2017
Source :
INTERNATIONAL JOURNAL OF OPERATIONS PRODUCTION MANAGEMENT
|
| 53. |
Application of the NSGA-II algorithm to a multi-period inventory-redundancy allocation problem in a series-parallel system
2017
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
RELIABILITY ENGINEERING SYSTEM SAFETY
|
| 54. |
A fuzzy EOQ model with backorders and forgetting effect on fuzzy parameters: An empirical study
2016
Source :
Computers Industrial Engineering
|
| 55. |
A fuzzy EOQ model with backorders and forgetting effect on fuzzy parameters: An empirical study
2016
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Computers and Industrial Engineering
|
| 56. |
Analytic Hierarchy Process-Based Analysis to Determine the Barriers to Implementing a Material Efficiency Strategy: Electrical and Electronics Companies in the Malaysian Context
2016
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
SUSTAINABILITY
|
| 57. |
Analytic Hierarchy Process-Based Analysis to Determine the Barriers to Implementing a Material Efficiency Strategy: Electrical and Electronics Companies in the Malaysian Context
2016
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Sustainability
|
| 58. |
Evaluation of criteria for CO2 capture and storage in the iron and steel industry using the 2-tuple DEMATEL technique
2016
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Journal of Cleaner Production
|
| 59. |
A fuzzy EOQ model with backorders and forgetting effect on fuzzy parameters: An empirical study
2016
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Computers Industrial Engineering
|
| 60. |
Application of the NSGA-II algorithm to a Multi-Period Inventory-Redundancy Allocation Problem in a Series-Parallel System
2016
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Reliability Engineering & System Safety
|
| 61. |
Evaluation of criteria for CO2 capture and storage in the iron and steel industry using the 2-tuple DEMATEL technique
2016
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Journal of Cleaner Production
|
| 62. |
A comprehensive review on energy efficient CO2 breakthrough technologies for sustainable green iron and steel manufacturing
2015
Author(s) : Raja Ariffin Bin Raja Ghazilla, Mahidzal Bin Dahari Source :
Renewable Sustainable Energy Reviews
|
| 63. |
Design for environment and design for disassembly practices in Malaysia: a practitioner\s perspectives
2015
Author(s) : Sumiani Binti Yusoff, Raja Ariffin Bin Raja Ghazilla Source :
Journal of Cleaner Production
|
| 64. |
IIR Filter Order and Cut-off Frequency Influences on EMG Signal Smoothing
2015
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Biomedical Research-India
|
| 65. |
Design for Environment and Design for Disassembly Practices in Malaysia: A Practitioners Perspectives
2015
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
International Journal of Cleaner Production
|
| 66. |
An Integrated Theoritical Framework for Designing Strategic Green Supply Chain
2015
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
International Journal of Industrial Engineering: Theory, Application and Practices
|
| 67. |
AN INTEGRATED FRAMEWORK- FOR DESIGNING A STRATEGIC GREEN SUPPLY CHAIN WITH AN APPLICATION TO THE AUTOMOTIVE INDUSTRY
2015
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
International Journal of Industrial Engineering-Theory Applications and Practice
|
| 68. |
IIR Filter Order and Cut-off Frequency Influences on EMG Signal Smoothing
2015
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Biomedical Research-India
|
| 69. |
Design for environment and design for disassembly practices in Malaysia: a practitioner\s perspectives
2015
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Journal of Cleaner Production
|
| 70. |
A Comprehensive Review on Energy Efficient CO2 Breakthrough Technologies for Sustainable Green Iron and Steel Manufacturing
2015
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Renewable and Sustainable Energy Reviews
|
| 71. |
Developmet of a Fuzzy Economic Order Quantity model for Imperfect Quality Items by Using the Learning Effect on Fuzzy Parameters
2015
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Journal of Intelligent and Fuzzy Systems
|
| 72. |
Development of a fuzzy economic order quantity model for imperfect quality items using the learning effect on fuzzy parameters
2015
Source :
Journal of Intelligent Fuzzy Systems
|
| 73. |
An Integrated Theoritical Framework for Designing Strategic Green Supply Chain with an Application to the Automotive Industries
2015
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
International Journal of Industrial Engineering
|
| 74. |
AN INTEGRATED FRAMEWORK- FOR DESIGNING A STRATEGIC GREEN SUPPLY CHAIN WITH AN APPLICATION TO THE AUTOMOTIVE INDUSTRY
2015
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
International Journal of Industrial Engineering-Theory Applications and Practice
|
| 75. |
A comprehensive review on energy efficient CO2 breakthrough technologies for sustainable green iron and steel manufacturing
2015
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Renewable Sustainable Energy Reviews
|
| 76. |
A methodology for optimizing modular design considering product end of life strategies
2015
Source :
International Journal of Precision Engineering and Manufacturing
|
| 77. |
A Strategic Approach to Develop Green Supply Chain
2015
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Procedia CIRP
|
| 78. |
Drivers and barriers Analysis for green manufacturing practices in Malaysia SMEs: A Preliminary Findings
2015
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Procedia CIRP
|
| 79. |
Incorporation of high recyclability material selection in computer aided design
2014
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Materials Design
|
| 80. |
Sustainable Supply Chain Design: A Configurational Approah
2014
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
The Scientific World Journal
|
| 81. |
Sustainable Supply Chain Design: A Configurational Approach
2014
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Scientific World Journal
|
| 82. |
Robotic system development for cooperative orthopedic drilling assistance
2014
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Advances in Mechanical Engineering
|
| 83. |
A Fuzzy Controller for Lower Limb Exoskeletons during Sit-to-Stand and Stand-to-Sit Movement Using Wearable Sensors
2014
Source :
Sensors
|
| 84. |
A Fuzzy Controller for Lower Limb Exoskeletons during Sit-to-Stand and Stand-to-Sit Movement using Wearable Sensors
2014
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Sensors
|
| 85. |
Robotic System Development for Cooperative Orthopedic Drilling Assistance
2014
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Advances in Mechanical Engineering
|
| 86. |
Development of decision support system for fastener selection in product recovery oriented design
2014
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
International Journal of Advanced Manufacturing Technology
|
| 87. |
Multi-objective optimization for high recyclability material selection using genetic algorithm
2013
Author(s) : Raja Ariffin Bin Raja Ghazilla |
| 88. |
Comparison of Malaysian and SAE J833 anthropometric proportions for vehicle package design
2013
Author(s) : Raja Ariffin Bin Raja Ghazilla |
| 89. |
Multi-objective optimization for high recyclability material selection using genetic algorithm
2013
Source :
International Journal of Advanced Manufacturing Technology
|
| 90. |
Reviews on Various Inertial Measurement Unit (IMU) Sensor Applications
2013
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Journal of Signal Processing Systems
|
| 91. |
Incorporating ergonomics evaluation in assembly and disassembly of repetitive task: focusing in load task
2013
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
ADVANCED MATERIALS RESEARCH
|
| 92. |
Optimal multi-material selection for lightweight design of automotive body assembly incorporating recyclability
2013
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
MATERIALS & DESIGN
|
| 93. |
Optimal multi-material selection for lightweight design of automotive body assembly incorporating recyclability
2013
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Materials Design
|
| 94. |
Incorporation of high recyclability material selection in computer aided design
2013
Author(s) : Raja Ariffin Bin Raja Ghazilla |
| 95. |
Development of decision support system for fastener selection in product recovery oriented design
2013
Author(s) : Raja Ariffin Bin Raja Ghazilla |
| 96. |
Product recovery oriented approach for fastener selection during conceptual design
2012
|
| 97. |
A FRAMEWORK OF INTEGRATED RECYCLABILITY TOOLS FOR AUTOMOBILE DESIGN
2012
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
International Journal of Industrial Engineering-Theory Applications and Practice
|
| 98. |
Investigation on the Driving Posture Comfort among
malaysian drivers
2012
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Advance Materials Research
|
| 99. |
A Framework of Integrated Recyclability Tools For
Automobile Design.
2012
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Journal of Industrial Engineering: Theory, Applications and Practice
|
| 100. |
Optimization of Product Design to Reduce the
Environmental Impact of Machining
2011
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
International Journal of Engineering and Management System
|
| 101. |
Insert geometry effects on surface roughness in
turning
process of AISI D2 steel
2010
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)
|
| 102. |
Eco Design In Malaysia: Challenges and
Oppurtunities.
2010
Author(s) : Raja Ariffin Bin Raja Ghazilla, Zahari Bin Taha Source :
Journal of Research and Applied Science
|
| 103. |
Pilot Investigation on the Mismatches of
Classroom Furniture
and Student Body Dimensions in Malaysian
Secondary
schools
Furniture and StudentBody Dimensions in Malaysian
Secondary Schools
2010
Author(s) : Raja Ariffin Bin Raja Ghazilla Source :
Journal of Social Sciences
|
| 104. |
Classroom Furniture and Student Body Dimensions
in East Malaysian Primary Schools
2006
Author(s) : Raja Ariffin Bin Raja Ghazilla |
CHAPTER IN BOOK
| NO | DETAILS OF CHAPTER IN BOOK |
|---|---|
| 1. |
Development of Real-Time Hardware in the Loop
Based MPC for Small-Scale Helicopter
2012
Author(s) : Raja Ariffin Bin Raja Ghazilla |
PROCEEDING
| NO | DETAILS OF PROCEEDING |
|---|---|
| 1. |
Development of a Multi
Criteria Decision Making Model for Product Recovery
Focused Fastener Selection
2011
Author(s) : Raja Ariffin Bin Raja Ghazilla |
| 2. |
Linkage Of Power Consumption To Design Feature On
Turning Process
2010
Author(s) : Raja Ariffin Bin Raja Ghazilla |
| 3. |
Insert Geometry Effects on Surface roughness in
turning process of AISI D2 Steel
2010
Author(s) : Raja Ariffin Bin Raja Ghazilla |
| 4. |
Application of Data Acquisition and Telemetry System into a Solar Vehicle
2010
Author(s) : Raja Ariffin Bin Raja Ghazilla, Yap Hwa Jen |
| 5. |
Optimization of Product Design to reduce Environmental
Impact of Machining.
2010
Author(s) : Raja Ariffin Bin Raja Ghazilla |
| 6. |
A Decision Making Model to Improve Recyclability in
Product Design
2010
Author(s) : Raja Ariffin Bin Raja Ghazilla |
| 7. |
LINKAGE OF POWER CONSUMPTION TO DESIGN FEATURE
ON TURNING PROCESS
2010
Author(s) : Raja Ariffin Bin Raja Ghazilla |
| 8. |
Fastener selection decision making model for ease of
disassemblability.
2010
Author(s) : Raja Ariffin Bin Raja Ghazilla |
| 9. |
Eco Design In Malaysia: Challenges and Opportunities
2009
Author(s) : Raja Ariffin Bin Raja Ghazilla |
| 10. |
Power Consumption of Lathe Machine for Life Cycle
Inventory Development
2009
Author(s) : Raja Ariffin Bin Raja Ghazilla |
RESEARCH PROJECT
| GRANT | PROGRESS | STATUS |
|---|---|---|
|
Reinforcement Learning For Uncertainty-driven Human-robot Collaboration Task Allocation In Automotive End-of-life Vehicle Disassembly Process
|
|
on going |
|
Active Ergonomics Risk Monitoring for Musculoskeletal Disorder (MSD) among Aging Workers
Researcher(s) : Associate Prof. Dr. Salwa Hanim Binti Abdul Rashid, Dr Ratna Sari Dewi |
|
end |
|
UM-AMRACE Aerospace Project
|
|
end |
|
Design And Development Of An Automated Ffb Bunch Grabber
|
|
end |
|
Design And Development Of An Automated Ffb Bunch Grabber
Researcher(s) : Dr. Mohamad Sofian Bin Abu Talip, Prof. Dr. Saad Mekhilef |
|
end |
|
Subject-adaptable Modular Exoskeleton For Elderly Worker Mobility Assistance
Researcher(s) : Professor Ir. Dr. Yap Hwa Jen, Dr. Azuddin Bin Mamat |
|
end |
|
Characterization Of Dynamic Network Effects For Automotive End Of Life Recovery Towards Enhancing Sustainable Automotive Development
|
|
end |
|
Development Of Multicriteria Decision Making Model For Selecting Green Manufacturing Practices In Malaysian Smes
Researcher(s) : - |
|
end |
|
Investigation And Proposition Of Hybrid Sustainable Manufacturing Model For The Smes
Researcher(s) : Novita Sakundarini , Professor Ir. Dr. Yap Hwa Jen |
|
end |
|
Development Of Automotive Interior Package Design Assessment Model
|
|
end |
RESEARCH COLLABORATOR
| GRANT | PROGRESS | STATUS |
|---|---|---|
|
Proof of Concept Design and Development of a Motion Simulator for Wheelchair Rehabilitation and Sports Training
|
|
new |
|
Constructing A Novel Theoretical Framework To Clarify The Impact Of Electrical Strength On Fiber Formation And Jet Path In Electrospinning With Multiple Nozzles And Layers
|
|
on going |
|
Using Poly-materials Three-dimensional-printed Anatomy Heart Models To Improve Anatomy Learning Amongst First Year University Students
Researcher(s) : Dr. Intan Suhana Binti Zulkafli, Associate Prof. Dr. Rosie Pamela Shashikala A/p David, Dr. Muhamad Alfakri B. Mat Noh, Dr. Noor Eliza Binti Hashim, Associate Prof. Dr. Raja Ariffin Bin Raja Ghazilla, Dr. Shamsi Amalina Binti Shamsuddin |
|
on going |
|
Drivers And Barriers For Circularity Adoption In End-of-life Vehicle Ecosystem
Researcher(s) : Associate Prof. Dr. Raja Ariffin Bin Raja Ghazilla, Putu Dana Karningsih |
|
end |
|
An Investigation Into Cultural Influence Towards Industrial Revolution 4.0 (ir 4.0) Technology Readiness And Acceptance Among Malaysian Small And Medium (smi) Manufacturers.
Researcher(s) : Associate Prof. Dr. Raja Ariffin Bin Raja Ghazilla |
|
end |
|
Plant Species Identification Using Augmented Reality
Researcher(s) : Dr. Azuddin Bin Mamat, Associate Prof. Dr. Raja Ariffin Bin Raja Ghazilla |
|
end |
|
A Computerized Diagnostic Tools For Component And Resources Recovery
|
|
end |
|
Development Of Sustainable Design Information System To Enhance Products Environmental Performance
|
|
end |
|
DEVELOPMENT OF UNIVERSITY-INDUSTRY COLLABORATION SELECTION MODEL FOR ENGINEERING RESEARCH
|
|
end |
|
Design And Development Of An Augmented Reality-based Simulation And Training System For Cnc Milling Machine
Researcher(s) : Associate Prof. Dr. Raja Ariffin Bin Raja Ghazilla |
|
end |
|
Method For Optimizing Material And Manufacturing Process Selection To Reduce Environmental Impact In Conceptual Design
|
|
end |
|
DEVELOPMENT OF OLYMPIC SCALE OF RECURVE BOW AND ARCHERY FOR LOCAL JUNIOR ATHLETES UNDER 15 AND 17 (U-15 & U-17)
Researcher(s) : Professor Ir. Dr. Yap Hwa Jen, Associate Prof. Dr. Raja Ariffin Bin Raja Ghazilla, Associate Prof. Dr. Salwa Hanim Binti Abdul Rashid, Zahari Taha |
|
end |