ARTICLE IN ACADEMIC JOURNALS
| NO | DETAILS OF ARTICLE IN ACADEMIC JOURNALS |
|---|---|
| 1. |
Simulation and experimental study of parameters in multiple-nozzle electrospinning: Effects of voltage and nozzle configuration on the electric field and electrospun jet attributes
2023
Author(s) : Wan Nor Liza Binti Wan Mahadi, Edzrol Niza Bin Mohamad Source :
Journal of Manufacturing Processes
DOI :
10.1016/j.jmapro.2022.11.051
|
| 2. |
Identification of flavour chemicals and potentially harmful compounds in refill e-liquids sold in Malaysia
2022
Author(s) : Edzrol Niza Bin Mohamad Source :
JOURNAL OF ADVANCED RESEARCH IN APPLIED SCIENCES AND ENGINEERING TECHNOLOGY
DOI :
https://doi.org/10.37934/araset.26.1.1522
|
| 3. |
Simulation and experimental study of parameters in multiple-nozzle electrospinning: Effects of nozzle arrangement on jet paths and fiber formation
2021
Author(s) : Amalina Binti Muhammad Afifi, Edzrol Niza Bin Mohamad Source :
Journal of Manufacturing Processes
DOI :
10.1016/j.jmapro.2020.12.024
|
| 4. |
Simulation and experimental study of parameters in multiple-nozzle electrospinning: Effects of nozzle arrangement on jet paths and fiber formation
2021
Source :
JOURNAL OF MANUFACTURING PROCESSES
DOI :
10.1016/j.jmapro.2020.12.024
|
| 5. |
Studies on properties and adsorption ability of bilayer chitosan/PVA/PVDF electrospun nanofibrous
2020
Author(s) : Amalina Binti Muhammad Afifi, Fathiah Binti Mohamed Zuki, Norazilawati Binti Muhamad Sarih, Edzrol Niza Bin Mohamad Source :
DESALINATION AND WATER TREATMENT
DOI :
10.5004/dwt.2020.26279
|
| 6. |
Simulation and experimental study of parameters in multiple-nozzle electrospinning: Effects of nozzle arrangement on jet paths and fiber formation
2020
Source :
Journal of Manufacturing Processes
DOI :
https://doi.org/10.1016/j.jmapro.2020.12.024
|
| 7. |
Influence of ultrasonication duration on rheological properties of nanofluid: An experimental study with alumina water nanofluid
2016
Author(s) : Amalina Binti Muhammad Afifi, Edzrol Niza Bin Mohamad Source :
International Communications in Heat and Mass Transfer
|
| 8. |
A review on the effect of bioethanol dilution on the properties and performance of automotive lubricants in gasoline engines
2016
Author(s) : Edzrol Niza Bin Mohamad, Masjuki Bin Haji Hassan Source :
Rsc Advances
DOI :
10.1039/C6RA10003A
|
| 9. |
Optimum design of triangular shaped micro mixer in micro channel heat sink
2015
Author(s) : Edzrol Niza Bin Mohamad Source :
International Journal of Heat and Mass Transfer
|
| 10. |
The prospects of biolubricants as alternatives in automotive applications
2014
Author(s) : Edzrol Niza Bin Mohamad Source :
Renewable and Sustainable Energy Reviews
|
| 11. |
Tribological properties of amorphous hydrogenated (a-C:H) and hydrogen-free tetrahedral (ta-C) diamond-like carbon coatings under jatropha biodegradable lubricating oil at different temperatures
2014
Author(s) : Edzrol Niza Bin Mohamad Source :
Applied Surface Science
|
| 12. |
International Journal of Heat and Mass Transfer
2012
Author(s) : Edzrol Niza Bin Mohamad, Saidur Rahman Abdul Hakim |
| 13. |
Evaluation Method of Audibility of Gear Noise under the Existencei of
Background Noise and the Effect of Tolerances in Tooth Flank Form
of Gear (under review)
2011
Author(s) : Edzrol Niza Bin Mohamad |
| 14. |
Test rig for micro gear and experimental analysis on the meshing condition and failure characteristics of steel micro involute gear and metallic glass one
2010
Author(s) : Edzrol Niza Bin Mohamad Source :
Mechanism and Machine Theory
|
| 15. |
Test rig for micro gear and experimental analysis on the meshing condition and failure characteristics of steel micro involute gear and metallic glass one
2010
Author(s) : Edzrol Niza Bin Mohamad Source :
Mechanism and Machine Theory
|
| 16. |
Effect of Variations in Tooth Flank Form Among Teeth on Gear Vibration
and an Sensory Evaluation Method Using Potential Gear Noise
2010
Author(s) : Edzrol Niza Bin Mohamad Source :
Journal of Advanced Mechanical Design, Systems, and Manufacturing
|
| 17. |
Effect of Convex Tooth Flank Form Deviation on the Characteristics of
Transmission Error of Gears Considering Elastic Deformation
2010
Author(s) : Edzrol Niza Bin Mohamad Source :
Journal of Mechanical Design
DOI :
10.1115/1.4002458
|
| 18. |
Test rig for micro gear and experimental analysis on the meshing
condition and failure characteristics of steel micro involute gear and
metallic glass one
2010
Author(s) : Edzrol Niza Bin Mohamad |
| 19. |
Effect of Convex Tooth Flank Form Deviation on the Characteristics of Transmission Error of Gears Considering Elastic Deformation
2010
Author(s) : Edzrol Niza Bin Mohamad Source :
Journal of Mechanical Design
|
| 20. |
Effect of Convex Tooth Flank Form Deviation on the Characteristics of Transmission Error of Gears Considering Elastic Deformation
2010
Author(s) : Edzrol Niza Bin Mohamad Source :
Journal of Mechanical Design
|
| 21. |
Test rig for micro gear and experimental analysis on the meshing condition and failure characteristics of steel micro involute gear and metallic glass one
2010
Author(s) : Edzrol Niza Bin Mohamad Source :
Mechanism and Machine Theory
|
| 22. |
Analysis of General Characteristics of Transmission Error of Gears With
Convex Modification of Tooth Flank Form Considering Elastic
Deformation Under Load
2009
Author(s) : Edzrol Niza Bin Mohamad |
| 23. |
B.N. Taufiq, H.H. Masjuki, T.M.I. Mahlia, M.S Faizul, R. Saidur, E. Niza Mohamad, Second law analysis for optimal thermal design of radial fin geometry by convection. Applied Thermal Engineering
2008
Author(s) : Edzrol Niza Bin Mohamad |
| 24. |
マイクロギヤの損傷・強度評価試験装置の開発(試験装置の構想・構築と金属
ガラス製 マイクロギヤの評価)
2008
Author(s) : Edzrol Niza Bin Mohamad Source :
JSME (Japanese) Part C
|
| 25. |
Second law analysis for optimal thermal design of radial fin geometry by convection
2007
Author(s) : Masjuki Bin Haji Hassan, Amalina Binti Muhammad Afifi, T.m. Indra Mahlia, Mohd Faizul Bin Mohd Sabri, Saidur Rahman Abdul Hakim, Edzrol Niza Bin Mohamad Source :
Applied Thermal Engineering
|
| 26. |
Second law analysis for optimal thermal design of radial fin geometry by convection
2007
Author(s) : Edzrol Niza Bin Mohamad Source :
Applied Thermal Engineering
|
| 27. |
Gear Noise Diagnosis System For Automobile Transmission Using Artificial Intelligence (Convergence of Training Process)
2001
Author(s) : Edzrol Niza Bin Mohamad Source :
Society of Automotive Engineers
|
| 28. |
Determination of Lapping Machine Settings for Hypoid Gears Using Artificial Intelligence (Gear Manufacturing)
2001
Author(s) : Edzrol Niza Bin Mohamad Source :
Japan Society of Mechanical Engineers
|
RESEARCH PROJECT
| GRANT | PROGRESS | STATUS |
|---|---|---|
|
An Experimental Investigation of the Multi-Nozzle Electrospinning Setup on the Nanofibre Formation
Researcher(s) : Associate Prof. Dr. Amalina Binti Muhammad Afifi |
|
end |
RESEARCH COLLABORATOR
| GRANT | PROGRESS | STATUS |
|---|---|---|
|
Adsorption Mechanism Of Waste Cooking Oil On Chitosan Nonwoven Nanomembrane In Oily Wastewater
|
|
on going |
|
Controlling Corrosion Rate Of Biodiesel Fueled Engines Via Cyclic Regeneration Of Weak Base Within Diesel Engine Oil
|
|
end |
|
Assessment Of Defective Valve In Reciprocating Compressor At Different Speeds And Discharge Pressure Using Acoustic Emission (ae) Technique
|
|
end |
|
Optimization Of Chitosan Nanofibrous Membrane For Water/wastewater Treatment
|
|
end |
|
Characterization Of Dynamic Network Effects For Automotive End Of Life Recovery Towards Enhancing Sustainable Automotive Development
|
|
end |