ARTICLE IN ACADEMIC JOURNALS
| NO | DETAILS OF ARTICLE IN ACADEMIC JOURNALS |
|---|---|
| 1. |
Friction and wear behavior of fluoride added Si3N4-SiC ceramic composites at elevated temperature
2023
Author(s) : Hendrik Simon Cornelis Metselaar, Nazatul Liana Binti Sukiman, Nurin Wahidah Binti Mohd Zulkifli Source :
CERAMICS INTERNATIONAL
DOI :
10.1016/j.ceramint.2022.12.144
|
| 2. |
Influence of fluoride phase on the tribological behaviour of Si3N4-SiC composites under extreme operating conditions
2023
Author(s) : Hendrik Simon Cornelis Metselaar, Nazatul Liana Binti Sukiman, Nurin Wahidah Binti Mohd Zulkifli Source :
WEAR
DOI :
10.1016/j.wear.2023.204970
|
| 3. |
Microwave irradiation-assisted transesterification of ternary oil mixture of waste cooking oil – Jatropha curcas – Palm oil: Optimization and characterization
2022
Author(s) : Nazatul Liana Binti Sukiman, Nurin Wahidah Binti Mohd Zulkifli, Md. Abul Kalam, Mohd Nur Ashraf Bin Mohd Yusoff Source :
Alexandria Engineering Journal
DOI :
10.1016/j.aej.2022.03.040
|
| 4. |
Effect of zirconia nanotube coating on the hydrophilicity and mechanochemical behavior of zirconium for biomedical applications
2022
Author(s) : Nazatul Liana Binti Sukiman Source :
SURFACES AND INTERFACES
DOI :
10.1016/j.surfin.2021.101623
|
| 5. |
Microwave irradiation-assisted transesterification of ternary oil mixture of waste cooking oil - Jatropha curcas - Palm oil: Optimization and characterization
2022
Author(s) : Masjuki Bin Haji Hassan, Nazatul Liana Binti Sukiman, Nurin Wahidah Binti Mohd Zulkifli, Mohd Nur Ashraf Bin Mohd Yusoff Source :
ALEXANDRIA ENGINEERING JOURNAL
DOI :
10.1016/j.aej.2022.03.040
|
| 6. |
A state-of-the-art review of the fabrication and characteristics of titanium and its alloys for biomedical applications
2022
Author(s) : Nazatul Liana Binti Sukiman, Masoud Sarraf Source :
BIO-DESIGN AND MANUFACTURING
DOI :
10.1007/s42242-021-00170-3
|
| 7. |
Sustainability of Palm Biodiesel in Transportation: a Review on Biofuel Standard, Policy and International Collaboration Between Malaysia and Colombia
2021
Source :
BIOENERGY RESEARCH
DOI :
10.1007/s12155-020-10165-0
|
| 8. |
Interfacial microstructure and strength of brazed copper/porous copper foam towards the effect of porous copper foam pore density and brazing holding time
2021
Author(s) : Siti Nurmaya Binti Musa, Farazila Binti Yusof, A.s. Md. Abdul Haseeb, Nazatul Liana Binti Sukiman Source :
Materialwissenschaft und Werkstofftechnik
DOI :
10.1002/mawe.202000059
|
| 9. |
Interfacial microstructure and strength of brazed copper/porous copper foam towards the effect of porous copper foam pore density and brazing holding timeEinfluss von Porendichte des Kupferschaums und Lothaltezeit auf das Grenzflachengefuge und die Festigkeit von Kupfer-Kupferschaum-Lotverbindungen
2021
Author(s) : Farazila Binti Yusof, Siti Nurmaya Binti Musa, Nazatul Liana Binti Sukiman, A.s. Md. Abdul Haseeb Source :
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK
DOI :
10.1002/mawe.202000059
|
| 10. |
Deformation and Fracture Behavior of Sandwiched Copper Foam Brazed Joint Using Amorphous Copper-Tin-Nickel-Phosphorus Filler
2021
Source :
FRONTIERS IN MATERIALS
DOI :
10.3389/fmats.2021.665219
|
| 11. |
Brazing of porous copper foam/copper with amorphous Cu-9.7Sn-5.7Ni-7.0P (wt%) filler metal: interfacial microstructure and diffusion behavior
2020
Author(s) : Nazatul Liana Binti Sukiman, Farazila Binti Yusof Source :
WELDING IN THE WORLD
|
| 12. |
An overview of fluoride-based solid lubricants in sliding contacts
2020
Author(s) : Nurin Wahidah Binti Mohd Zulkifli, Nazatul Liana Binti Sukiman, Subhrojyoti Mazumder, Hendrik Simon Cornelis Metselaar Source :
Journal of the European Ceramic Society,
|
| 13. |
Sustainability of palm biodiesel in transportation: a review on biofuel standard, policy and international collaboration between Malaysia and Colombia
2020
Source :
BioEnergy Research
|
| 14. |
Experimental and simulation investigation into the effects of a flat plate deflector on vertical axis wind turbine
2018
Author(s) : Nazatul Liana Binti Sukiman, Chong Wen Tong Source :
ENERGY CONVERSION AND MANAGEMENT
|
| 15. |
Microstructural Modification of Sn-0.7Cu Solder Alloys by Fe/Bi-Addition for Achieving High Mechanical Performance
2017
Author(s) : Nazatul Liana Binti Sukiman Source :
JOURNAL OF ELECTRONIC MATERIALS
|
| 16. |
High impact reliability and high temperature performance of Fe and Bi added Sn-1Ag-0.5Cu solder alloys
2017
Author(s) : Nazatul Liana Binti Sukiman Source :
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
|
| 17. |
Adhesion measurement of highly-ordered TiO2 nanotubes on Ti-6Al-4V alloy
2017
Author(s) : Nazatul Liana Binti Sukiman, Masoud Sarraf, Noor Hayaty Binti Abu Kasim, Wan Jefrey Basirun, Bushroa Binti Abdul Razak Source :
PROCESSING AND APPLICATION OF CERAMICS
|
| 18. |
Performance enhancements on vertical axis wind turbines using flow augmentation systems: A review
2017
Author(s) : Chong Wen Tong, Nazatul Liana Binti Sukiman Source :
RENEWABLE SUSTAINABLE ENERGY REVIEWS
|
| 19. |
High impact reliability and high temperature performance of Fe and Bi added Sn-1Ag-0.5Cu solder alloys
2017
Author(s) : Iswadi Bin Jauhari, Norhayati Binti Soin, Mohd Faizul Bin Mohd Sabri, Nazatul Liana Binti Sukiman, Suhana Binti Mohd Said Source :
Journal of Materials Science: Materials in Electronics
|
| 20. |
Microhardness and shear performance of Fe/Bi-bearing SAC105 solder alloys under high temperature aging
2017
Author(s) : Nazatul Liana Binti Sukiman Source :
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
|
| 21. |
Microhardness and shear performance of Fe/Bi-bearing SAC105 solder alloys under high temperature aging
2016
Source :
Journal of Materials Science: Materials in Electronics
DOI :
DOI: 10.1007/s10854-016-5511-4
|
| 22. |
Impact toughness, hardness and shear strength of Fe and Bi added Sn-1Ag-0.5Cu lead-free solders
2016
Author(s) : Nazatul Liana Binti Sukiman Source :
Microelectronics Reliability
|
| 23. |
Impact toughness, hardness and shear strength of Fe and Bi added Sn-1Ag-0.5Cu lead-free solders
2016
Source :
Microelectronics Reliability
|
| 24. |
Preparation and Characterization of Polyvinyl Alcohol-Based Composite Reinforced with Nanocellulose and Nanosilica
2015
Author(s) : Nazatul Liana Binti Sukiman Source :
Bioresources
|
| 25. |
Influence of microalloying additions on Al-Mg alloy. Part 1: Corrosion and electrochemical response
2014
Author(s) : Nazatul Liana Binti Sukiman Source :
Corrosion Engineering Science and Technology
|
| 26. |
Influence of microalloying additions on Al-Mg alloy. Part 2: Phase analysis and sensitisation behaviour
2014
Author(s) : Nazatul Liana Binti Sukiman Source :
Corrosion Engineering Science and Technology
|
| 27. |
Influence of microalloying additions on Al-Mg alloy. Part 2: Phase analysis and sensitisation behaviour
2014
Author(s) : Nazatul Liana Binti Sukiman Source :
Corrosiong Engineering, Science and Technology
|
| 28. |
Influence of microalloying additions on Al-Mg alloy. Part 1: Corrosion and electrochemical response
2014
Author(s) : Nazatul Liana Binti Sukiman Source :
Corrosion Engineering, Science and Technology
|
| 29. |
Electrochemical and Corrosion Response of Commercially Pure Aluminum Alloyed with Binary Additions of Strontium
2013
Author(s) : Nazatul Liana Binti Sukiman Source :
Journal of the Electrochemical Society
|
| 30. |
Imparting Sensitization Resistance to an Al-5Mg Alloy via Neodymium Additions
2013
Author(s) : Nazatul Liana Binti Sukiman Source :
Corrosion
|
| 31. |
Electrochemical and corrosion response of commercially pure aluminium alloyed with binary additions of strontium
2013
Author(s) : Nazatul Liana Binti Sukiman Source :
Journal of Electrochemical Society
|
| 32. |
Influence of alloyed Nd content on the corrosion of an Al-5Mg alloy
2013
Author(s) : Nazatul Liana Binti Sukiman Source :
Corrosion Science
|
| 33. |
Influence of alloyed Nd content on the corrosion of an Al-5Mg alloy
2013
Author(s) : Nazatul Liana Binti Sukiman Source :
Corrosion Science
|
| 34. |
Imparting Sensitization Resistance to an Al-5Mg Alloy via Neodymium Additions
2013
Author(s) : Nazatul Liana Binti Sukiman Source :
Corrosion
|
| 35. |
Metastable Pitting Characteristics of Aluminium Alloys
Measured Using Current Transients During Potentiostatic
Polarisation
2012
Author(s) : Nazatul Liana Binti Sukiman |
| 36. |
Electrochemical Behavior and Localized Corrosion
Associated with Mg2si Particles in Al and Mg Alloys
2012
Author(s) : Nazatul Liana Binti Sukiman Source :
ECS Electrochemistry Letters
|
CHAPTER IN BOOK
| NO | DETAILS OF CHAPTER IN BOOK |
|---|---|
| 1. |
Durability and Corrosion of Aluminium and Its Alloys:
Overview, Property Space, Techniques and Developments
2012
Author(s) : Nazatul Liana Binti Sukiman |
PROCEEDING
| NO | DETAILS OF PROCEEDING |
|---|---|
| 1. |
Corrosion Maps for Aluminium Alloys
2010
Author(s) : Nazatul Liana Binti Sukiman |
RESEARCH PROJECT
| GRANT | PROGRESS | STATUS |
|---|---|---|
|
Enhancement Of Biofuel Production From Tropical Biodiversity Sources
|
|
end |
|
A Study On The Assessment Process Of Final Year Project At Faculty Of Engineering Um
|
|
end |
|
Tribocorrosion Characterization For Sustainable And Durable Cast Aluminium Alloys In Internal Combustion Engine
Researcher(s) : Professor Ir. Dr. Farazila Binti Yusof, Dr. Nor Ishida Binti Zainal Abidin, Associate Prof. Dr. Nurin Wahidah Binti Mohd Zulkifli, Nik Rosli Bin Abdullah |
|
end |
|
Corrosion Behavior Of Nano-textured Surface And Effect On Spectrally Selective Solar Absorber Performance
Researcher(s) : Dr. Nor Ishida Binti Zainal Abidin, Associate Prof. Dr. Roslina Binti Ahmad, Rajeev Kumar Gupta, Siti Aminah Mohd Noor |
|
end |
|
The design, computational simulation and testing of a slanted blades cross axis wind turbine system
Researcher(s) : - |
|
end |
|
Electrochemical Response of Retrogression and Re-aging (RRA) heat treated high strength aluminium alloys
Researcher(s) : - |
|
end |
RESEARCH COLLABORATOR
| GRANT | PROGRESS | STATUS |
|---|---|---|
|
Formulation And Optimization Of Palm-based Tmp Ester Blend As Bio-based Lubricant For Engine Oil
|
|
end |
|
Empowering Teaching And Learning At Faculty Of Engineering Um
|
|
end |
|
The Corrosion Study Of Mg Alloys With The Influenced Of Protein, Amino Acids And Glucose In Buffered Hank?s Solution At 37 ?c For Biomedical Applications
|
|
end |
|
Synergistic Effect Of Nanographene On Rheology And Lubricating Mechanism Of Biobased Lubricant
Researcher(s) : Professor Ir. Dr. Mohd Faizul Bin Mohd Sabri, Prof. Emeritus Ir. Dr. Masjuki Bin Haji Hassan, Dr. Nazatul Liana Binti Sukiman, Jumat Bin Salimon, Robiah Binti Yunus |
|
end |
|
Study On Relations Between Microstructural And Rheological Properties Of Nanocrystalline Cellulose Based Nanocomposites
|
|
end |
|
Effect Of Single/duplex Stage Heat Treatment And Thermal Oxidation On The Microstructure And Properties Of Ti6al4v Alloy
|
|
end |
|
Feasibility of Green and Fuel Economy Engine Oil Derived from Bio-Based Lubricant
|
|
end |