ARTICLE IN ACADEMIC JOURNALS
NO | DETAILS OF ARTICLE IN ACADEMIC JOURNALS |
---|---|
1. |
Validation of a roughness parameters for defining surface roughness of prosthetic polyethylene Pe-Lite liner
2022
Author(s) : Nasrul Anuar Bin Abd Razak,Mohd Sayuti Bin Ab Karim Source : SCIENTIFIC REPORTS DOI : 10.1038/s41598-022-05173-3 |
2. |
Development and Performance Evaluation of Automated Methadone Dispenser for Drug Addiction Therapy
2022
Author(s) : Nahrizul Adib Bin Kadri,Rusdi Bin Abd Rashid,Nasrul Anuar Bin Abd Razak,Mohd Sayuti Bin Ab Karim Source : JOURNAL OF TESTING AND EVALUATION DOI : 10.1520/JTE20210709 |
3. |
A review on biomedical implant materials and the effect of friction stir based techniques on their mechanical and tribological properties
2022
Author(s) : Bushroa Binti Abdul Razak,Mohd.fadzil Bin Jamaludin,Mohd Sayuti Bin Ab Karim,Mohd Ridha Bin Muhamad @ Mohd Ata'illah,Sufian Raja Source : JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T DOI : 10.1016/j.jmrt.2022.01.050 |
4. |
Design and development of automated dispensing machine as medical device-based application: A review
2022
Author(s) : Nasrul Anuar Bin Abd Razak,Mohd Sayuti Bin Ab Karim Source : PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE DOI : 10.1177/09541062221099163 |
5. |
Alcohol Consumption Patterns: A Systematic Review of Demographic and Sociocultural Influencing Factors
2022
Source : INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH DOI : 10.3390/ijerph19138103 |
6. |
A Comprehensive Review on Machining of Titanium Alloys
2021
Author(s) : Mohd Hamdi Bin Abd Shukor,Mohd Sayuti Bin Ab Karim Source : ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING DOI : 10.1007/s13369-021-05420-1 |
7. |
Recent research progress in friction stir welding of aluminium and copper dissimilar joint: a review
2021
Author(s) : Nukman Bin Yusoff,Farazila Binti Yusof,Mohd.fadzil Bin Jamaludin,Mohd Sayuti Bin Ab Karim,Mohd Ridha Bin Muhamad @ Mohd Ata'illah,Sufian Raja Source : JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T DOI : 10.1016/j.jmrt.2021.09.037 |
8. |
Study on Electrical Conductivity of Graphene Oxide Decorated with Silver Nanoparticle for Electrochemical Sensor Development
2021
Author(s) : Salmah Binti Karman,Suriani Binti Ibrahim,Mohd Sayuti Bin Ab Karim,Wan Safwani Binti Wan Kamarul Zaman,Chan Chow Khuen Source : INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE DOI : 10.20964/2021.05.03 |
9. |
A novel inertia moment estimation algorithm collaborated with Active Force Control scheme for wheeled mobile robot control in constrained environments
2021
Author(s) : Bushroa Binti Abdul Razak,Nukman Bin Yusoff,Mohd Sayuti Bin Ab Karim,Mohammed Abdo Hashem Ali Source : EXPERT SYSTEMS WITH APPLICATIONS DOI : 10.1016/j.eswa.2021.115454 |
10. |
A review of history of CAD/CAM system application in the productionof transtibial prosthetic socket in developing countries (from 1980to 2019)
2021
Author(s) : Nasrul Anuar Bin Abd Razak,Mohd Sayuti Bin Ab Karim Source : PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE DOI : 10.1177/09544119211035200 |
11. |
Formulation, Tribological Performance, and Characterization of Base Oil with ZnO, Graphene, and ZnO/Graphene Nanoparticles Additives
2020
Author(s) : Mohd Sayuti Bin Ab Karim Source : Material Science and Engineering Technology, 2020 |
12. |
Different Nanoparticles Usage for Tribological Performance Improvement
2020
Author(s) : Mohd Sayuti Bin Ab Karim Source : Industrial Lubrication and Tribology, 2020 |
13. |
Feasibility of Using CeO2/Water Dielectrical Nanofluid in Electrical Discharge Machining (EDM)
2020
Source : Arabian Journal of Science and Engineering |
14. |
Enhancing the Tribological Behavior of Lubricating Oil by Adding TiO2, Graphene, and TiO2/Graphene Nanoparticles
2019
Source : Tribology Transactions |
15. |
Tribological performance of SiO2-based nanofluids in minimum quantity lubrication grinding of Si3N4 ceramic
2019
Author(s) : Mohd Sayuti Bin Ab Karim Source : Journal of Manufacturing Processes |
16. |
Prediction of specific grinding forces and surface roughness in machining of AL6061-T6 alloy using ANFIS technique
2019
Author(s) : Mohd Sayuti Bin Ab Karim Source : Industrial Lubrication and Tribology |
17. |
Characterization Investigation of ZnO, Graphene, and ZnO/Graphene Nanoparticles as Nanoscale Lubricants Additives
2019
Author(s) : Mohd Sayuti Bin Ab Karim Source : The Science and Engineering of Materials (ICoSEM) |
18. |
Improvement of Methadone Maintenance Treatment (MMT) Process Through Development and Implementation of Methadone Dispenser
2018
Source : Journal of Testing and Evaluation |
19. |
Effects of Process Parameters on the Surface Roughness of Stainless Steel 316L Parts Produced by Selective Laser Melting
2018
Author(s) : Mohd Sayuti Bin Ab Karim Source : JOURNAL OF TESTING AND EVALUATION |
20. |
Structure, mechanism, and performance evaluation of natural gas hydrate kinetic inhibitors
2018
Author(s) : Nahrizul Adib Bin Kadri,Mohd Sayuti Bin Ab Karim Source : Reviews in Inorganic Chemistry DOI : 10.1515/revic-2017-0013 |
21. |
Comparative study on the performance of the MQL nano-lubricant and conventional flood lubrication techniques during grinding of Si3N4 ceramic
2018
Author(s) : Mohd Sayuti Bin Ab Karim Source : The International Journal of Advanced Manufacturing Technology DOI : https://doi.org/10.1007/s00170-018-1689-3 |
22. |
Enhancement of Graphene Quantum Dots Based Applications via Optimum Physical Chemistry: A Review
2018
Author(s) : Nahrizul Adib Bin Kadri,Mohd Sayuti Bin Ab Karim Source : Biocybernetics and Biomedical Engineering |
23. |
Microstructure characterization and maximization of the material removal rate in nano-powder mixed EDM of Al-Mg2Si metal matrix composite ANFIS and RSM approaches
2018
Author(s) : Mohd Sayuti Bin Ab Karim Source : The International Journal of Advanced Manufacturing Technology |
24. |
Micro-electrode fabrication processes for micro-EDM drilling and milling: a state-of-the-art review
2017
Author(s) : Mohd Sayuti Bin Ab Karim Source : INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
25. |
Effect of various refining processes for Kenaf Bast non-wood pulp fibers suspensions on heat transfer coefficient in circular pipe heat exchanger.
2017
Author(s) : Mohd Sayuti Bin Ab Karim Source : Heat and Mass Transfer DOI : https://doi.org/10.1007/s00231-017-2176-3 |
26. |
Material Characterization of Tribological Effects in HSS Hacksaw Blade
2017
Author(s) : Rusdi Bin Abd Rashid,Mohd Sayuti Bin Ab Karim Source : Industrial Lubrication and Tribology. DOI : http://dx.doi.org/10.1108/ILT-0 |
27. |
Optimized design of a hybrid PV wind diesel energy system for sustainable development at coastal areas in Bangladesh.
2017
Author(s) : Mohd Sayuti Bin Ab Karim Source : Environmental Progress & Sustainable Energy DOI : 10.1002/ep.12496 |
28. |
Characterizing the Effects of Micro Electrical Discharge Machining Parameters on Material Removal Rate during Micro EDM Drilling of Tungsten Carbide (WC-Co)
2017
Author(s) : Mohd Sayuti Bin Ab Karim Source : IOP Conference Series: Materials Science and Engineering DOI : 10.1088/1757-899X/241/1/012005 |
29. |
Micro-EDM Drilling of Tungsten Carbide Using Microelectrode with High Aspect Ratio to Improve MRR, EWR, and Hole Quality.
2017
Author(s) : Mohd Sayuti Bin Ab Karim Source : Elsevier |
30. |
Carbon-Based Nanobiohybrid Thin Film for Amperometric Glucose Sensing
2017
Source : ACS biomaterials DOI : 10.1021/acsbiomaterials.7b00325 |
31. |
Development and evaluation of the machining performance of a CNC gantry double motion machine tool in different modes
2017
Source : INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, DOI : 10.1007/s00170-017-0332-z |
32. |
Effects of Process Parameters on Surface Roughness of Stainless Steel 316L Parts Produced by Selective Laser Melting
2017
Author(s) : Mohd Sayuti Bin Ab Karim Source : Journal of Testing and Evaluation |
33. |
Visual Related Analysis and Application of Saline Soil Culture Design Factors
2017
Author(s) : Mohd Sayuti Bin Ab Karim Source : International Journal of Multimedia and Ubiquitous Engineering |
34. |
Study of environmentally friendly and facile functionalization of
graphene nanoplatelet and its application in convective heat transfer
2017
Author(s) : Mohd Sayuti Bin Ab Karim Source : Energy Conversion and Management DOI : http://dx.doi.org/10.1016/j.enconman.2017.07.036. |
35. |
Ultrasonic assisted grinding of advanced materials for biomedical and aerospace applications-a review
2017
Author(s) : Mohd Sayuti Bin Ab Karim Source : INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
36. |
Immobilized copper ions on MWCNTS-Chitosan thin film: Enhanced amperometric sensor for electrochemical determination of diclofenac sodium in aqueous solution
2017
Source : INTERNATIONAL JOURNAL OF HYDROGEN ENERGY |
37. |
The International Journal of Advanced Manufacturing Technology
2016
Author(s) : Mohd Sayuti Bin Ab Karim Source : The International Journal of Advanced Manufacturing Technology DOI : 10.1007/s00170-016-9671-4 |
38. |
Temperature Regulation of Photovoltaic Module Using Phase Change Material: A Numerical Analysis and Experimental Investigation
2016
Source : International Journal of Photoenergy |
39. |
Optimized design of a hybrid PV-wind-diesel energy system for sustainable development at coastal areas in Bangladesh. Environmental Progress & Sustainable Energy
2016
Author(s) : Mohd Sayuti Bin Ab Karim Source : Environmental Progress & Sustainable Energy |
40. |
Analysis of Fourier and Non-Fourier Heat Conduction using Tikhonov based Well-conditioned Asymptotic Waveform Evaluation Technique
2016
Author(s) : Mohd Sayuti Bin Ab Karim Source : Journal of Computer Science & Computational Mathematics DOI : 10.20967/jcscm.2016.03.007 |
41. |
Adding Nano Titanium Dioxide Anatase and Graphene to Base Oil Group ΙΙ for Lubrication Optimization
2016
Author(s) : Mohd Sayuti Bin Ab Karim Source : Advanced Processes and Systems in Manufacturing (APSIM), 2016, |
42. |
Optimization the Tribological Characteristics of Lube Oil with Nano Graphene and Metal Oxides
2016
Source : Renewable and Green Energy, 2016 |
43. |
Micro-electrode fabrication processes for micro-EDM drilling and milling: a state-of-the-art review,
2016
Author(s) : Mohd Sayuti Bin Ab Karim Source : The International Journal of Advanced Manufacturing Technology |
44. |
Improvement the Tribological Properties of Lube Oil with Nanoparticles Additives
2016
Author(s) : Mohd Sayuti Bin Ab Karim Source : Tribology and Lubrication, 2016. |
45. |
Temperature Regulation of Photovoltaic Module Using Phase Change Material: A Numerical Analysis and Experimental Investigation.
2016
Author(s) : Mohd Sayuti Bin Ab Karim Source : International Journal of Photoenergy |
46. |
Fuzzy logic-based approach to investigate the novel uses of nano suspended lubrication in precise machining of aerospace AL tempered grade 6061
2015
Source : Journal of Cleaner Production |
47. |
Morphology of surface generated by end milling AL6061- T6 using molybdenum disulfide (MoS2) nanolubrication in end milling machining.
2014
Author(s) : Mohd Sayuti Bin Ab Karim Source : Journal of Cleaner Production |
48. |
Investigation on the morphology of the machined surface in end milling of aerospace AL6061-T6 for novel uses of SiO2 nanolubrication system
2014
Source : Journal of Cleaner Production |
49. |
Novel uses of SiO2 nano-lubrication system in hard turning process of hardened steel AISI4140 for less tool wear, surface roughness and oil consumption
2014
Author(s) : Mohd Sayuti Bin Ab Karim Source : Journal of Cleaner Production |
50. |
Investigating the optimum molybdenum disulfide (MoS2) nanolubrication parameters in CNC milling of AL6061-T6 alloy
2014
Author(s) : Mohd Sayuti Bin Ab Karim Source : The International Journal of Advanced Manufacturing Technology |
51. |
Cutting force reduction and surface quality improvement in machining of aerospace duralumin AL-2017-T4 using carbon onion nanolubrication system
2013
Author(s) : Mohd Sayuti Bin Ab Karim Source : International Journal of Advanced Manufacturing Technology |
52. |
An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy
2013
Author(s) : Mohd Sayuti Bin Ab Karim Source : International Journal of Advanced Manufacturing Technology |
53. |
Development of SiO2 Nanolubrication System for better surface Quality, More Power Savings and Less Oil Consumption in Hard Turning of Hardened Steel AISI4140
2013
Source : Advanced Materials Research |
54. |
Reduction of power and lubricant oil consumption in milling process using a new SiO2 nanolubrication system
2012
Author(s) : Mohd Sayuti Bin Ab Karim Source : The International Journal of Advanced Manufacturing Technology |
55. |
Enhancement and verification of a machined surface quality for glass milling operation using CBN grinding tool-Taguchi approach
2012
Author(s) : Mohd Sayuti Bin Ab Karim Source : International Journal of Advanced Manufacturing Technology |
56. |
Cutting Force Reduction and Surface Quality Improvement in Machining of Aerospace Duralumin AL-2017-T4 Using Carbon Onion Nanolubrication System
2012
Author(s) : Nader Ghaffari Khaligh Source : INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
57. |
An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy
2012
Author(s) : Mohd Sayuti Bin Ab Karim Source : The International Journal of Advanced Manufacturing Technology |
58. |
Enhancement and verification of a machined surface quality for glass milling operation using CBN grinding tool-Taguchi approach
2011
Author(s) : Mohd Sayuti Bin Ab Karim Source : The International Journal of Advanced Manufacturing Technology |
59. |
Experimental study on minimizing edge chipping in glass operation using an internal CBN grinding tool
2011
Author(s) : Mohd Sayuti Bin Ab Karim Source : Materials and Manufacturing Processes |
60. |
Optimizing the machining parameters in glass grinding operation on the CNC milling machine for best surface roughness
2011
Author(s) : Mohd Sayuti Bin Ab Karim Source : Advanced Materials Research |
CHAPTER IN BOOK
NO | DETAILS OF CHAPTER IN BOOK |
---|---|
1. |
Micro-EDM Drilling of Tungsten Carbide Using Microelectrode with High Aspect Ratio to Improve MRR, EWR, and Hole Quality
2017
Author(s) : Mohd Sayuti Bin Ab Karim |
2. |
Techniques to Improve EDM Capabilities: A Review
2017
Author(s) : Mohd Sayuti Bin Ab Karim |
3. |
ANFIS Modeling for Higher Machining Performance of Aluminium Tempered Grade 6061 Using Novel SIO2 Nanolubrication
2015
Author(s) : Mohd Sayuti Bin Ab Karim |
4. |
Surface Quality Improvement in CNC End Milling of Aluminum Alloy Using Nanolubrication System
2013
Author(s) : Mohd Sayuti Bin Ab Karim |
PROCEEDING
NO | DETAILS OF PROCEEDING |
---|---|
1. |
Implementation of methadone dispenser in drug addiction treatment program
2018
Author(s) : Rusdi Bin Abd Rashid,Mohd Sayuti Bin Ab Karim |
2. |
Quality Control of Palm Kernel Oil Using Individual Moving Range (I-MR) Chart
2018
Author(s) : Mohd Sayuti Bin Ab Karim |
3. |
A descriptive analysis to develop technologies capability database for rapid tooling application
2018
Author(s) : Mohd Sayuti Bin Ab Karim |
4. |
Effects of process parameters on surface quality of parts produced by selective laser melting-ANFIS modelling
2018
Author(s) : Mohd Sayuti Bin Ab Karim |
5. |
Proceedings of International Conference on Advanced Processes and Systems in Manufacturing (APSIM 2016)
2016
Author(s) : Mohd Sayuti Bin Ab Karim |
6. |
International Conference on Advanced Processes and Systems in Manufacturing (APSIM 2016)
2016
Author(s) : Mohd Sayuti Bin Ab Karim |
7. |
Investigate the machining performance of AISI304 stainless steel using thin pulse jet and fluid atomizer minimal quantity lubrication systems
2014
Author(s) : Mohd Sayuti Bin Ab Karim |
8. |
Investigate the Possibility of Using Carbon Onion Nanolubrication with DLC Cutting Tool for Lower Machining Power Consumption
2014
Author(s) : Mohd Sayuti Bin Ab Karim |
9. |
Development of SiO2 Nanolubrication System for better surface Quality, More Power Savings and Less Oil Consumption in Hard Turning of Hardened Steel AISI4140
2013
Author(s) : Mohd Sayuti Bin Ab Karim |
10. |
Determining the Effect of Cutting Parameters on Machining Performances in Hard Turning Operation
2013
Author(s) : Mohd Sayuti Bin Ab Karim |
11. |
Surface Quality Improvement in CNC End Milling of Aerospace AL-2017-T4 Alloy using Carbon Onion Nanolubrication with DLC Cutting Tool
2012
Author(s) : Mohd Sayuti Bin Ab Karim |
RESEARCH PROJECT
GRANT | PROGRESS | STATUS |
---|---|---|
Selective Laser Melting of AISi10mg-3161 Multi-Material Parts
Researcher(s) : Associate Prof. Dr. Farazila Binti Yusof
(RU Geran - Fakulti Program) |
|
on going |
Prototype Scale Up Of A Low-cost Methadone Dispensing System With Integrated Secure Database For Individualised Methadone Maintenance Treatment (mmt)
(Prototype Research Grant Scheme (PRGS)) |
|
end |
Investigation On Grindability Of Hard Ceramics And Superalloys Using Assisted Nanolubrication System With Ultrasonic Technology
(Fundamental Research Grant Scheme (FRGS)) |
|
end |
Development of Industrial Grade CNC Lathe Machine
Researcher(s) : Professor Dato' Ir. Dr. Mohd Hamdi Bin Abd Shukor,Associate Prof. Dr. Ahmed Aly Diaa Mohammed Sarhan,Dr. Noor Azizi Bin Mardi
(Geran Penyelidikan Universiti Malaya (UMRG) - AET (Innovative Technology (ITRC))) |
|
end |
RESEARCH COLLABORATOR
GRANT | PROGRESS | STATUS |
---|---|---|
Breaking Barriers and Building Futures ? Malaysia Madani
Researcher(s) : Prof. Dr. Che Zarrina Binti Sa'ari,Associate Prof. Ir. Dr. Mohd Sayuti Bin Ab Karim,Dr. Mahanom Binti Jalil
(Bantuan Khas Penyelidikan (BKP Special)) |
|
on going |
Fundamental Study of Internal Surface Profile Analysis between Laminated Tranfemoral Socket and Polypropylene Transfemoral Soket
Researcher(s) : Associate Prof. Ir. Dr. Mohd Sayuti Bin Ab Karim
(RU Geran - Fakulti Program) |
|
on going |
Hybrid Manufacturing: Integration Of Direct Energy Deposition (ded) Wire-arc Additive Manufacturing (waam) With Forging Operations For Production Of Net-shaped Lightweight Metal Alloy Components
Researcher(s) : Associate Prof. Ir. Dr. Mohd Sayuti Bin Ab Karim,Ir. Dr. Mohd Ridha Bin Muhamad @ Mohd Ata'illah
(Others MOHE) |
|
end |
Investigation Of The Influence Of Various Technologies Portfolio On Rapid Tooling
Researcher(s) : Associate Prof. Ir. Dr. Mohd Sayuti Bin Ab Karim
(Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC))) |
|
end |