ARTICLE IN ACADEMIC JOURNALS
| NO | DETAILS OF ARTICLE IN ACADEMIC JOURNALS |
|---|---|
| 1. |
Influence of electrodeposited Cu-Ni layer on interfacial reaction and mechanical properties of laser welded-brazed Mg/Ti lap joints
2019
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
JOURNAL OF MANUFACTURING PROCESSES
|
| 2. |
Effect of copper-nickel interlayer thickness on laser welding-brazing of Mg/ Ti alloy.
2019
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Optics and Laser Technology
|
| 3. |
Sintering behaviour and properties of manganese-doped alumina.
2019
Author(s) : Ramesh Singh A/l Kuldip Singh, Wong Yew Hoong Source :
Ceramics International
|
| 4. |
A review on laser beam welding of copper alloys
2018
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
DOI :
10.1007/s00170-017-1566-5
|
| 5. |
Effect of microwave sintering on the properties of copper oxide doped Y-TZP ceramics
2018
Author(s) : Ramesh Singh A/l Kuldip Singh, Tan Chou Yong, Wong Yew Hoong, Ubagaram Johnson Alengaram, Ramesh A/l T. Subramaniam Source :
Ceramics International
DOI :
10.1016/j.ceramint.2018.07.215
|
| 6. |
A review on laser beam welding of titanium alloys
2018
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
International Journal of Advanced Manufacturing Technology
DOI :
10.1007/s00170-018-2030-x
|
| 7. |
Effect of Ag nanoparticles seeding on the properties of silica spheres
2018
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Ceramics International
|
| 8. |
Challenges and advances in laser welding of dissimilar light alloys: Al/Mg, Al/Ti and Mg/Ti
2018
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
International Journal of Advanced Manufacturing Technology
DOI :
10.1007/s00170-017-1565-6
|
| 9. |
A review on the hydrothermal ageing behaviour of Y-TZP ceramics
2018
Author(s) : Ramesh Singh A/l Kuldip Singh, Tan Chou Yong Source :
Ceramics International
DOI :
10.1016/j.ceramint.2018.08.216
|
| 10. |
Comparative study on the corrosion and wear behavior of plasma-sprayed vs. high velocity oxygen fuel-sprayed Al8Si20BN ceramic coatings.
2018
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Ceramics International
DOI :
10.1016/j.ceramint.2018.03.275
|
| 11. |
A review on laser welding of copper alloys.
2018
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
International Journal of Advanced Manufacturing Technology
DOI :
10.1007/s00170-017-1566-5
|
| 12. |
Is Graphitic Silicon Carbide (Silagraphene) Stable?
2018
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Chemistry of Materials
DOI :
10.1021/acs.chemmater.8b03293
|
| 13. |
Influence of a nonionic surfactant on curcumin delivery of nanocellulose reinforced chitosan hydrogel.
2018
Author(s) : Ramesh Singh A/l Kuldip Singh, Ching Yern Chee Source :
International Journal of Biological Macromolecules
|
| 14. |
Enhanced efficiency in dye-sensitized solar cell based on zinc oxide-modified poly(ethylene oxide) gel electrolyte
2018
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Ionics
DOI :
10.1007/s11581-017-2271-y
|
| 15. |
Effect of air and argon sintering atmospheres on properties and hydrothermal aging resistance of Y-TZP ceramics.
2018
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Journal of Materials Engineering and Performance
DOI :
10.1007/s11665-018-3428-1
|
| 16. |
Comparison between microwave and conventional sintering on the properties and microstructural evolution of tetragonal zirconia
2018
Source :
Ceramics International
DOI :
10.1016/j.ceramint.2018.02.086
|
| 17. |
Analysis of surface cracks in round bars using dual boundary element method
2018
Source :
Engineering Analysis with Boundary Elements
|
| 18. |
A review on microstructural study and compressive strength of geopolymer mortar, paste and concrete.
2018
Author(s) : Ramesh Singh A/l Kuldip Singh, Ubagaram Johnson Alengaram Source :
Construction and Building Materials
DOI :
10.1016/j.conbuildmat.2018.07.075
|
| 19. |
Characterization of biogenic hydroxyapatite derived from animal bones for biomedical applications
2018
Author(s) : Ramesh Singh A/l Kuldip Singh, Hari Chandran A/l Thambinayagam, Sivakumar A/l Krishnasamy, Ching Yern Chee Source :
Ceramics International
|
| 20. |
Analysis of corrosion protection behavior of Al2O3-TiO2 oxide ceramic coating on carbon steel pipes for petroleum industry
2018
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Ceramics International
|
| 21. |
Empirical solutions for stress intensity factors of a surface crack in a solid cylinder under pure torsion
2018
Author(s) : Andri Andriyana, Ramesh Singh A/l Kuldip Singh Source :
Engineering Fracture Mechanics
|
| 22. |
Predicting the primitive form of rhombohedral silicon carbide (9RSiC): A pathway toward polytypic heterojunctions.
2018
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Crystal Growth & Design
DOI :
10.1021/acs.cgd.8b01218
|
| 23. |
The properties of hydroxyapatite ceramic coatings produced by plasma electrolytic oxidation
2018
Source :
Ceramics International
|
| 24. |
Novel Injectable Calcium Phosphate Bone Cement from Wet Chemical Precipitation Method
2017
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
IOP conf. Series: Materials Science and Engineering
DOI :
10.1088/1757-899X/205/1/012012
|
| 25. |
Effect of Poly(vinyl alcohol) Addition on the Properties of Hydrothermal Derived Calcium Phosphate Cement for Bone Filling Materials
2017
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
IOP conf. Series: Materials Science and Engineering
DOI :
10.1088/1757-899X/205/1/012013
|
| 26. |
Novel development towards preparation of highly efficient ionic liquid based co-polymer electrolytes and its application in dye-sensitized solar cells.
2017
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Organic Electronics
|
| 27. |
Thermal phase stability and properties of hydroxyapatite derived from bio-waste eggshells.
2017
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Journal of Ceramic Processing Research
|
| 28. |
Poly(vinyl alcohol)-α-chitin composites reinforced by oil palm empty fruit bunch fiber-derived nanocellulose.
2017
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
International Journal of Polymer Analysis and Characterization
DOI :
10.1080/1023666X.2017.1288345
|
| 29. |
Microstructure and mechanical properties of resistance spot welded in welding-brazing mode and resistance element welded magnesium alloy/austenitic stainless steel joints.
2017
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Journal of Materials Processing Technology
|
| 30. |
Formation of neodymium oxide by thermal oxidation of sputtered Nd thin film on Si substrate
2017
Author(s) : Wong Yew Hoong, Ramesh Singh A/l Kuldip Singh Source :
Journal of Materials Science-Materials in Electronics
DOI :
10.1007/s10854-017-7009-0
|
| 31. |
Investigation of the effect of anodization time and annealing temperature on the physical properties of ZrO2 thin film on a Si substrate.
2017
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Research Express
DOI :
10.1088/2053-1591/aa824e
|
| 32. |
Sintering behavior and characteristic of bio-based hydroxyapatite coating deposited on titanium
2017
Source :
Journal of Ceramic Processing Research
|
| 33. |
Preparation and characterization of nanocellulose reinforced semi-interpenetrating polymer network of chitosan hydrogel
2017
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Cellulose
DOI :
10.1007/s10570-017-1251-8
|
| 34. |
Enhanced ionic conductivity of scandia-ceria-stabilized-zirconia (10Sc1CeSZ) electrolyte synthesized by the microwave-assisted glycine nitrate process.
2017
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Ceramics International
|
| 35. |
Low-temperature sintering and prolonged holding time on the densification and properties of zirconia ceramic
2017
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Journal of Ceramic Processing Research
|
| 36. |
The effects of sintering additives on the mechanical properties and microstructure evolution of 3 mol% Y-TZP
2017
Author(s) : Ramesh Singh A/l Kuldip Singh, Wong Yew Hoong, Nor Ishida Binti Zainal Abidin, Tan Chou Yong Source :
Journal of Ceramic Processing Research
|
| 37. |
A review on resistance spot welding of aluminum alloys.
2017
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
International Journal of Advanced Manufacturing Technology
DOI :
10.1007/s00170-016-9225-9
|
| 38. |
Microstructure and mechanical properties of resistance spot welded in welding-brazing mode and resistance element welded magnesium alloy/ austenitic stainless steel joints.
2017
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Journal of Materials Processing Tech.
|
| 39. |
Exact solution for stresses/displacements in a multilayered hollow cylinder under thermo-mechanical loading.
2017
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
International Journal of Pressure Vessels and Piping
|
| 40. |
Influence of sodium on the properties of sol-gel derived hydroxyapatite powder and porous scaffolds
2017
Author(s) : Ramesh Singh A/l Kuldip Singh, Nor Ishida Binti Zainal Abidin, Tan Chou Yong, Hari Chandran A/l Thambinayagam, Wong Yew Hoong, Ching Yern Chee Source :
Ceramics International
DOI :
10.1016/j.ceramint.2017.06.088
|
| 41. |
Formation of neodymium oxide by thermal oxidation of sputtered Nd thin film on Si substrate
2017
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Journal of Materials Science: Materials in Electronics
DOI :
10.1007/s10854-017-7009-0
|
| 42. |
Electrocoagulation treatment of raw landfill leachate using iron-based electrodes: Effects of process parameters and optimization
2017
Author(s) : Ramesh Singh A/l Kuldip Singh, Abdul Aziz Bin Abdul Raman Source :
Journal of Environmental Management
DOI :
10.1016/j.jenvman.2017.08.028
|
| 43. |
Effect of two-step sintering on the hydrothermal ageing resistance of tetragonal zirconia polycrystals
2017
Author(s) : Ramesh Singh A/l Kuldip Singh, Hari Chandran A/l Thambinayagam, Tan Chou Yong, Ramesh A/l T. Subramaniam Source :
Ceramics International
DOI :
10.1016/j.ceramint.2017.03.052
|
| 44. |
Sintering behaviour and properties of flyash-doped zirconia
2017
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Science Forum
DOI :
doi:10.4028/www.scientific.net/
|
| 45. |
Resistance Element Welding of Magnesium Alloy/austenitic Stainless Steel
2017
Source :
IOP Conf. Series: Materials Science and Engineering
DOI :
10.1088/1757-899X/238/1/012004
|
| 46. |
Thermal phase stability and properties of hydroxyapatite derived from biowaste eggshells
2017
Author(s) : Mohd Faizul Bin Mohd Sabri Source :
Journal of Ceramic Processing Research
|
| 47. |
Osteogenic priming potential of bovine hydroxyapatite sintered at different temperatures for tissue engineering applications.
2017
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Letters
DOI :
10.1016/j.matlet.2017.03.057
|
| 48. |
Poly(vinyl alcohol)- -chitin composites reinforced by oil palm empty fruit bunch fiber-derived nanocellulose
2017
Author(s) : Ramesh Singh A/l Kuldip Singh, Ching Yern Chee Source :
International Journal of Polymer Analysis and Characterization
DOI :
10.1080/1023666X.2017.1288345
|
| 49. |
Effect of manganese oxide on the densification and properties of ceria-doped scandia stabilized zirconia.
2016
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Journal of Ceramic Processing Research
|
| 50. |
Effects of sintering on the mechanical and ionic properties of ceria-doped scandia stabilized zirconia ceramic.
2016
Author(s) : Wong Yew Hoong, Ramesh Singh A/l Kuldip Singh Source :
Ceramics International
|
| 51. |
Virtual planning, control and machining for a modular-based automated factory operation in an augmented reality environment
2016
Author(s) : Ramesh Singh A/l Kuldip Singh, Yap Hwa Jen Source :
Scientific Reports
|
| 52. |
Microwave pyrolysis of oil palm fiber (OPF) for hydrogen production: parametric investigation
2016
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Energy Conversion and Management
|
| 53. |
Effect of ionic liquid 1-butyl-3-methylimidazolium bromide on ionic conductivity of poly(ethyl methacrylate) based polymer electrolytes
2016
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Express
|
| 54. |
Direct conversion of eggshell to hydroxyapatite ceramic by a sintering method.
2016
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Ceramics International
|
| 55. |
Effect of manganese oxide on the sinterability of 8 mol% yttria-stabilized zirconia
2016
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Characterization
|
| 56. |
Evaluation of thermoelectric properties of Cu3.21Bi4.79S9 bismuth chalcogenide
2016
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Key Engineering Materials
|
| 57. |
Breakdown field enhancement of Si-based MOS capacitor by post-deposition annealing of the reactive sputtered ZrOxNy gate oxide.
2016
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Applied Physics A
|
| 58. |
Microwave sintering of ceria-doped scandia stabilized zirconia as electrolyte for solid oxide fuel cell.
2016
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
International Journal of Hydrogen Energy
|
| 59. |
Sintering properties and low-temperature degradation behaviour of Y-TZP ceramics
2016
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Journal of Ceramic Processing Research
|
| 60. |
Wettability, structural and optical properties investigation of TiO2 nanotubular arrays
2016
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Research Bulletin
|
| 61. |
Synthesis of Cu3.21Bi4.79S9 bismuth chalcogenide by mechanical alloying
2016
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Powder Technology
|
| 62. |
Effects of anodisation parameters on thin film properties: a review
2016
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Science and Technology
|
| 63. |
The effect of iron oxide on the mechanical and ageing properties of Y-TZP ceramic
2016
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Key Engineering Materials
|
| 64. |
Effects of anodization duration on the properties of sputtered samarium thin films on silicon substrate.
2016
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Journal of Materials Science: Materials in Electronics
|
| 65. |
Ionic liquid enhanced magnesium-based polymer electrolytes for electrical double-layer capacitors.
2016
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Ionics
|
| 66. |
Sintering behaviour and properties of graphene oxide-doped Y-TZP ceramics.
2016
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Ceramics International
|
| 67. |
Interfacial reaction analysis of Cu-Sn-Ni-P/Cu joint using microwave hybrid heating
2016
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Key Engineering Materials
|
| 68. |
Fuzzy logic based model for predicting surface roughness of machined Al Si Cu Fe die casting alloy using different additives-turning
2015
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Measurement
|
| 69. |
Influence of powder morphology and sintering temperature on the properties of hydroxyapatite.
2015
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
International Journal of Automotive and Mechanical Engineering (IJAME)
|
| 70. |
Mechanical properties and hydrothermal ageing behaviour of flyash-doped Y-TZP ceramic.
2015
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
International Journal of the Institute of Materials Malaysia (IJIMM)
|
| 71. |
Investigation on structural and electrochemical properties of binder free nanostructured nickel oxide thin film
2015
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Letters
|
| 72. |
Effect of sintering holding time on the properties and low-temperature degradation behaviour of manganese oxide-doped Y-TZP ceramic
2015
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Journal of Ceramic Processing Research
|
| 73. |
Investigation into effect of cutting conditions on surface roughness while dry machining Al- 11% Si and Al-11%Si-1% Bi die casting alloy
2015
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Advanced Materials Research
|
| 74. |
Characteristics and properties of hydoxyapatite derived by sol gel and wet chemical precipitation methods.
2015
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Ceramics International
|
| 75. |
Effect of annealing treatment on the characteristics of bovine bone
2015
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Journal of Ceramic Processing Research
|
| 76. |
Effects of two-step sintering on the properties of hydroxyapatite bioceramic
2015
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Journal of Ceramic Processing Research
|
| 77. |
Development of a bone substitute material based on alpha-tricalcium phosphate scaffold coated with carbonate apatite/poly-epsilon-caprolactone
2015
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Biomedical Materials
|
| 78. |
Influence of pH on the physical and electromagnetic properties of Mg-Mn ferrite synthesized by a solution combustion method.
2015
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Characterization
|
| 79. |
Sintering behaviour of natural porous hydroxyapatite derived from bovine bone.
2015
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Ceramics International
|
| 80. |
Investigating the Machinability of Al Si Cu cast alloy containing bismuth and antimony using coated carbide insert
2015
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Measurement
|
| 81. |
The Effects of calcium-to-phosphorus ratio on the densification and mechanical properties of hydroxyapatite ceramic.
2015
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
International Journal of Applied Ceramic Technology
|
| 82. |
Effects of silicate and carbonate substitution on the properties of hydroxyapatie prepared by aqueous co- precipitation method
2015
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials and Design
|
| 83. |
Synthesis and sintering of hydroxyapatite derived from eggshells as a calcium precursor
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Ceramics International
|
| 84. |
Role of mechanical alloying parameters on powder distribution of Al/Cu alloy and Al/Cu composite.
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Research Innovations
|
| 85. |
Nonsurfactant Synthesis and Characterizations of Metal-Organic Framework MOF-5 Materials Using Fatty Alcohols
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Science of Advanced Materials
|
| 86. |
Water absorption properties of kenaf fibre-poly (vinyl alcohol) composites
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Research Innovations
|
| 87. |
Thermal treatment and properties of bovine hydroxyapatite.
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Research Innovations
|
| 88. |
Fatigue crack growth of a corner crack in a square prismatic bar under combined cyclic torsion-tension loading
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
International Journal of Fatigue
|
| 89. |
Electrophoretic deposition of magnesium silicates on titanium implants: Ion migration and silicide interfaces
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Applied Surface Science
|
| 90. |
Sintering studies of synthesised manganese-oxide- doped calcium phosphate via wet chemical precipitation method
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Research Innovations
|
| 91. |
Simulating the implications of oxide scale formations in austenitic steels of ultra-supercritical fossil power plants
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Engineering Failure Analysis
|
| 92. |
Effect of sintering holding time on low- temperature degradation of yttria stabilised zirconia ceramics
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Research Innovations
|
| 93. |
Fuzzy logic-based model for prediction of building wall humidity level
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Indoor and Built Environment
|
| 94. |
Sintering properties of zirconia-based ceramic composite
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Research Innovations
|
| 95. |
Synthesis and Properties of Biphasic Calcium Phosphate Prepared by Different Methods
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Advanced Materials Research
|
| 96. |
Stress intensity factors of a corner crack emanating from a pinhole of a solid cylinder
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Engineering Fracture Mechanics
|
| 97. |
Effect of short time sintering on the mechanical properties of undoped zirconia ceramics
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Applied Mechanics and Materials
|
| 98. |
Low-temperature degradation and defect relationship in yttria-tetragonal zirconia polycrystal ceramic.
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Research Innovations
|
| 99. |
Oxide scale growth and presumed exfoliation in a 700 C or higher steam condition: A simulation study for future operations of ultra- supercritical power plants
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
The Journal of Supercritical Fluids
|
| 100. |
Sintering studies of synthesised manganese- oxide- doped calcium phosphate via wet chemical . precipitation method.
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Research Innovations
|
| 101. |
Sintering properties and thermal depletion of boron in zirconia zirconium diboride conductive ceramic
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Ceramics International
|
| 102. |
Simulating the implications of oxide scale formations in austenitic steels of ultra- supercritical fossil power plants
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Engineering Failure Analysis
|
| 103. |
Thermal treatment and properties of bovine hydroxyapatite
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Research Innovations
|
| 104. |
Oxide scale growth and presumed exfoliation in a 700 degree C or higher steam condition: A simulation study for future operations of ultra- supercritical power plants.
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Journal of Supercritical Fluids
|
| 105. |
Fuzzy logic-based model for prediction of building wall humidity level
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Indoor and Built Environment
|
| 106. |
Effect of sintering holding time on low-temperature degradation of yttria stabilised zirconia ceramics.
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Research Innovations
|
| 107. |
Sintering properties of zirconia-based ceramic composite.
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Research Innovations
|
| 108. |
Sintering properties and thermal depletion of boron in zirconia-zirconium diboride conductive ceramic
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Ceramics International
|
| 109. |
Low-temperature degradation and defect relationship in yttria-tetragonal zirconia polycrystal ceramic
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Research Innovations
|
| 110. |
Water absorption properties of kenaf fibre poly(vinyl alcohol) composites.
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Research Innovations
|
| 111. |
Effect of Copper Oxide and Manganese Oxide on Properties and Low Temperature Degradation of Sintered Y-TZP Ceramic
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Journal of Materials Engineering and Performance
|
| 112. |
Development of Sn-Cu-Sb alloys for making lead- and bismuth-free pewter
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
International Journal of Materials Research
|
| 113. |
Fatigue growth of a surface crack in a V-shaped notched round bar under cyclic tension.
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)
|
| 114. |
Fatigue crack growth of a corner crack in a square prismatic bar under combined cyclic torsion tension loading
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
International Journal of
|
| 115. |
Electrophoretic deposition of magnesium silicates on titanium implants: Ion migration and silicide interfaces
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Applied Surface Science
|
| 116. |
Synthesis and sintering of hydroxyapatite derived from eggshells as a calcium precursor
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Ceramics International
|
| 117. |
Stress intensity factors of a corner crack emanating from a pinhole of a solid cylinder
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Engineering Fracture Mechanics
|
| 118. |
Effect of Copper Oxide and Manganese Oxide on Properties and Low Temperature Degradation of Sintered Y-TZP Ceramic
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Journal of Materials Engineering and Performance
|
| 119. |
Augmented reality based programming, planning and simulation of a robotic work cell.
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
|
| 120. |
Role of mechanical alloying parameters on powder distribution of Al/Cu alloy and Al/Cu composite
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Materials Research Innovations
|
| 121. |
Development of Sn-Cu-Sb alloy for making lead- and bismuth-free pewter
2014
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
International Journal of Materials
|
| 122. |
Protein Foaming-consolidation Method for Fabrication
of High Performance Porous Bioceramics
2013
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 123. |
Sintering properties of hydroxyapatite powders prepared using different methods.
2013
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 124. |
Oxygen Vacancy Comparisons for 3Y�TZP Sintered in Air and Argon Gas Atmosphere.
2013
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 125. |
Estimation of oxide scale growth and temperature increase of high (9-12%) chromium martensitic steels of superheater tubes.
2013
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 126. |
Mechanochemical Synthesis of Hydroxyapatite Bioceramics through Two Different Milling Media
2013
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Key Engineering Materials
|
| 127. |
Mechanochemical Synthesis of Magnesium Doped Hydroxyapatite: Powder Characterization
2013
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 128. |
Densification Behavior of Nano Y-TZP Ceramics.
2013
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 129. |
Energy efficient wind turbine system based on fuzzy control approach
2013
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 130. |
Characteristics of Sintered Bovine Hydroxyapatite
2013
Author(s) : Ramesh Singh A/l Kuldip Singh, Mohd Hamdi Bin Abd Shukor |
| 131. |
Synthesis and Characterization of Silica Nanospheres
Using Nonsurfactant Template
2013
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 132. |
Carbothermal nitridation process of mechanically milled silica sand using Taguchi�s method
2013
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 133. |
Two dimensional elastic deformations of functionally graded coated plates with clamped edges.
2013
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 134. |
Synthesis of Zinc Doped-Biphasic Calcium Phosphate Nanopowder via Sol-Gel Method.
2013
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 135. |
Design of thin wall structures for energy absorption applications: Enhancement of crashworthiness due to axial and oblique impact forces
2013
Author(s) : Ramesh Singh A/l Kuldip Singh Source :
Thin-Walled Structures
|
| 136. |
Sintered Properties of Y-TZP/ZrB2 Ceramics
2013
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 137. |
Notch root strain measurement of WE43-T6 magnesium alloy using electronic speckle pattern interferometry
2013
Source :
Materials and Design
|
| 138. |
Quantitative Measurement of Students PO Attainments for Taylor�s University Engineering Programmes
2013
Author(s) : Ramesh Singh A/l Kuldip Singh |
BOOK
| NO | DETAILS OF BOOK |
|---|---|
| 1. |
ME Technical Publication, Vol. 6
2005
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 2. |
ME Technical Publication, Vol. 5
2004
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 3. |
ME Technical Publication, Vol. 4
2003
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 4. |
ME Technical Publication, Vol. 3
2002
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 5. |
ME Technical Publication, Vol. 1
2002
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 6. |
ME Technical Publication, Vol. 2
2002
Author(s) : Ramesh Singh A/l Kuldip Singh |
CHAPTER IN BOOK
| NO | DETAILS OF CHAPTER IN BOOK |
|---|---|
| 1. |
Two-Step Sintering of Ceramics
2018
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 2. |
Technology Assisted Problem Solving Packages For Engineering
2008
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 3. |
Effect of Copper Oxide Additions on the Grain Boundary Resistivity in Yttria-Tetragonal Zirconia
2002
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 4. |
Synthesis and Redox Behaviour of Oxygen Deficient Brannerite LiVWO6 for Lithium Batteries
2002
Author(s) : Ramesh Singh A/l Kuldip Singh |
PROCEEDING
| NO | DETAILS OF PROCEEDING |
|---|---|
| 1. |
Facile Synthesis and Characterizations of MOF-5 Coordination Polymer with Various Metal Linker Ratios for Ammonia Gas Storage
2011
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 2. |
Sinterability and Mechanical Properties of MnO2-doped Y-TZP: The Effects of Holding Time Variations
2011
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 3. |
Microemulsion Synthesis of Nanoparticle PZT Powder
2011
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 4. |
The Influence of Manganese Oxide on the Sintering Behavior of Yttria Tetragonal Zirconia
2011
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 5. |
Calcination Effects on the Sinterability of Hydroxyapatite Bioceramics
2011
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 6. |
Influence of Magnesium Doping in Hydroxyapatite
Bioceramics Sintered by Short Holding Time
2011
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 7. |
The Effect of Ball Milling Hours in the synthesizing
Nano-Crystalline Forsterite via Solid-State Reaction
2011
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 8. |
Manufacturing of High Toughness Hydroxyapatite Produced by Wet Chemical Method
2011
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 9. |
Thermal Analysis on Hydroxyapatite Synthesis through
Mechanochemical Method
2011
Author(s) : Ramesh Singh A/l Kuldip Singh, Mohd Hamdi Bin Abd Shukor |
| 10. |
Study of Microstructure and Dielectric Properties of PMN-PZT Ceramics via a Mixed Powder Method Including Microemulsion Derived PZT Powder
2010
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 11. |
Preparation of Dense Hydroxyapatite by Pressureless Sintering Using Short Holding Time
2010
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 12. |
A Model for the Simulation of Powder Compaction Process at elevated Temperature
2010
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 13. |
Sintering and Mechanical Properties of MgO-doped Hydroxyapatite Bioceramics
2010
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 14. |
Mechanical Properties of Niobium Oxide Doped Y-TZP for Biomedical Applications
2010
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 15. |
Pressureless Sintering of Electro-Conductive Y-TZP Based Composites
2010
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 16. |
Effect of Sintering Parameters on the Mechanical and Ageing Properties of Y-TZP Ceramics
2010
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 17. |
The Role of Lubrication During Green Compact Generation at Above Ambient Temperature: Analysis Through Microstructure Evaluation
2010
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 18. |
The Effect of Two-Stage sintering on the Properties of Steatite
2010
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 19. |
Synthesis and Characterizations of Nanoporous Metal Oxide Spheres for Hydrogen Storage
2010
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 20. |
Review: Forsterite Ceramics
2010
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 21. |
Densification Behavior of Steatite by Two Stage Sintering
2010
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 22. |
The Effect of Zinc Oxide on the Sintering of Steatite Ceramic
2010
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 23. |
Improved Fracture Toughness of Hydroxyapatite Bioceramics
2009
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 24. |
Sintering Behaviour of Hydroxyapatite Ceramics Prepared By Different Routes
2009
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 25. |
Low Cost and Facile Synthesis of Potential Materials For Solid Hydrogen Storage
2009
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 26. |
Effect of Sintering Additives on the Properties of Alumina Ceramic
2009
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 27. |
Solid Acid Catalysts From Waste For Biodiesel Production
2009
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 28. |
The Effect of Cerium Oxide on the Sinterability of Hydroxyapatite
2009
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 29. |
Preparation of Biphasic Calcium Phosphate Ceramics Powders and Conversion to Porous Bodies
2008
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 30. |
Effect of Zinc on The Properties of Calcium Phosphate Ceramics
2008
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 31. |
An Overview on the Implementation of Industrial Training for Mechanical Engineering Students in UNITEN
2008
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 32. |
Synthesis and Densification of Hydroxyapatite Powders
2008
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 33. |
Mechanical Properties and Ageing Behaviour of Manganese Doped Y-TZP
2008
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 34. |
Consolidation of Nanocrystalline Hydroxyapatite Powder for Medical Applications
2008
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 35. |
Sintering of Alumina With Titania as Sintering Additive
2008
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 36. |
Densification Studies of Tetragonal Zirconia With Manganese as Sintering Additive
2008
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 37. |
Improvement In Sinterability of Hydroxyapatite By Addition of Magnesium Oxide
2008
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 38. |
Industrial Training: Gateway to the Real World, Dilemmas & Problems
2008
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 39. |
Influence of Magnesium Doping in Hydroxyapatite Ceramics
2008
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 40. |
Mechanical Properties of Manganese Doped Y-TZP: The Effects of Holding Time Variations
2008
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 41. |
Effect of Co-Dopants on The Properties of Alumina
2008
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 42. |
Sintering Behaviour of TiO2–Doped Alumina for Biomedical Application
2008
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 43. |
Novel Chemical Conversion of Eggshell to Hydroxyapatite Powder
2008
Author(s) : Mohd Hamdi Bin Abd Shukor, Ramesh Singh A/l Kuldip Singh |
| 44. |
Virtual Worlds: The Next Generation for Solving Engineering Problems
2008
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 45. |
Pre-Heat Treatment Effects on the Sinterability of Hydroxyapatite Bioceramics
2008
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 46. |
Development of Zinc Doped Hydroxyapatite for Bone Implant Applications
2008
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 47. |
Densification Behaviour of Zirconia Bimodal Mixtures
2008
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 48. |
Sintering of Bismuth-Doped Hydroxyapatite Bioceramics
2008
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 49. |
Effects of Magnesium Oxide on the Properties of Hydroxyapatite Bioceramics
2008
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 50. |
Development of Magnesium-Doped Biphasic Calcium Phosphate through Sol-Gel Method
2008
Author(s) : Mohd Hamdi Bin Abd Shukor, Ramesh Singh A/l Kuldip Singh |
| 51. |
Synthesis and Morphological Studies of Aluminum Incorporated Mesoporous Silica By Microwave-Assisted Sol-Gel Technique
2007
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 52. |
The Influence of Ca/P Ratio on the Properties of Hydroxyapatite Bioceramic
2007
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 53. |
Versatile Route to Mesoporous Silica and Core-Shell Silica with Controlled Mesoporosity Using Renewable Hydrocarbons
2007
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 54. |
New, Facile and Low Cost Extraction Method of Sodium Silicate from Waste via Microwave Irradiation
2007
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 55. |
Design Approaches for Visualization of Engineering Problem
2007
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 56. |
Preparation of Manganese Doped Biphasic Calcium Phosphate Powders Through Sol-Gel Method
2007
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 57. |
Effect of Holding Time on the Sinterability of 3 mol% Yttria-Stabilized Zirconia (Y-TZP)
2007
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 58. |
Bioactive Porous Ceramics via Polymeric Sponge Method: The Effect of Preparation Conditions on Physical Properties
2007
Author(s) : Mohd Hamdi Bin Abd Shukor, Ramesh Singh A/l Kuldip Singh |
| 59. |
Magnesium-Doped Hydroxyapatite For Faster Bone Growth
2007
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 60. |
The Effect of MgO on the Sinterability of Hydroxyapatite
2007
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 61. |
The effect of MnO2 on the sinterability of hydroxyapatite
2006
Author(s) : Mohd Hamdi Bin Abd Shukor, Ramesh Singh A/l Kuldip Singh |
| 62. |
Managing Multimedia and DVR Tools For Visualization of Engineering Concepts
2006
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 63. |
Plasma Sprayed Hydroxyapatite Coatings For Biomedical Application
2006
Author(s) : Mohd Hamdi Bin Abd Shukor, Ramesh Singh A/l Kuldip Singh |
| 64. |
Tool Life of coated carbides in end milling of different mould steels
2006
Author(s) : Mohd Hamdi Bin Abd Shukor, Ramesh Singh A/l Kuldip Singh |
| 65. |
Mechanical Properties and Ageing Behaviour of Manganese Doped Y-TZP.
2006
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 66. |
The Effect of Ca/P Ratio on the Sinterability of Hydroxyapatite
2006
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 67. |
The Effect of MgO on The Sinterability of Hydroxyapatite
2006
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 68. |
Sinterability of hydroxyapatite compacts prepared by cold isostatic pressing for clinical applications
2006
Author(s) : Mohd Hamdi Bin Abd Shukor, Ramesh Singh A/l Kuldip Singh |
| 69. |
Hydroxyapatite Porous Bodies Via Polymeric Sponge Method Using Commercial Powder
2005
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 70. |
Densification Behaviour of Manganese Oxide Doped Y-TZP Ceramics
2005
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 71. |
Effect of Flyash on the Sinterability of Y-TZP Ceramics
2005
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 72. |
Production of Near-Net Shape Metal Powder Compact Through Warm Compaction Route – An Experimental Investigation
2005
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 73. |
Manufacturing of Mechanical Components through Warm Compaction Process – A Finite Element Analysis and Experimental Investigation
2005
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 74. |
Nanoporous Silica With Novel Templating Method
2005
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 75. |
An overview of plasma spray and RF magnetron sputtering of HA on metallic implant
2005
Author(s) : Mohd Hamdi Bin Abd Shukor, Ramesh Singh A/l Kuldip Singh |
| 76. |
Pressureless Sintering and Consolidation of Nanocrystalline Hydroxyapatite Powder
2005
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 77. |
Study of Sintering Process of Powder Compact Prepared Through Warm Compaction Route
2004
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 78. |
The Development & Effectiveness of a Multimedia Engineering Visualization Tool (EVT)
2004
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 79. |
Visualizing Engineering Problem in Virtual Environment
2004
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 80. |
Sinterability of Synthesized Hydroxyapatite by Microwave Heating
2004
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 81. |
Densification and Properties Relationship in Polycrystalline Hydroxyapatite
2003
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 82. |
Recent Developments in Multimedia Based Engineering Tools
2003
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 83. |
Mechanical Behaviour of Hydroxyapatite
2003
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 84. |
Biomedical Applications of Hydroxyapatite
2003
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 85. |
Effect of CIP on the Mechanical Properties of Hydroxyapatite
2003
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 86. |
Using Multimedia to Minimize Computational Effort in Engineering
2003
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 87. |
Visualizing Mechanics Statics Through Multimedia Interaction
2003
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 88. |
Multimedia Dilemma: Choosing the Right Tool for Authoring and Teaching Engineering
2003
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 89. |
VMDT: A Multimedia Coached Environment For Engineering Mechanics Dynamics
2003
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 90. |
The Role of Multimedia in Engineering Courseware
2003
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 91. |
Multimedia Approach to Analyze Engineering Structure
2003
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 92. |
Particle Size Effect on the Mechanical Properties of Synthesized Hydroxyapatite
2003
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 93. |
The Influence of Sintering Temperature on the Properties of 25 vol% Alumina-Titania Composite
2002
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 94. |
Densification Behaviour of Synthesized Hydroxyapatite for Biomedical Application
2002
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 95. |
Critical Evaluation of Rich Picture as a Pictorial Technique in Soft Systems Methodology for Resolving Unstructured Problems
2002
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 96. |
Development of Interactive Multimedia in Teaching Engineering Materials
2002
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 97. |
The Influence of Sintering Temperature on the Mechanical Properties of 3 mol% Yttria-Zirconia Material.
2002
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 98. |
Current Challenges & Trends of Interactive Multimedia in Enhancing Engineering Education.
2002
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 99. |
Sintering Behaviour of Co-Precipitated Zirconia Ceramics
2002
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 100. |
Interactive Multimedia Driven Tool to Aid Engineering Students
2002
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 101. |
The Importance & Benefits of Using Interactive Multimedia to Facilitate Courses in Varsities
2002
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 102. |
The Effect of Hostile Environments on the Phase stability of Copper Oxide-Doped Zirconia Ceramics
2001
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 103. |
The Characterisation of Alumina-Zirconia Composite Prepared by Slip Casting Technique
2001
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 104. |
Degradation Behaviour of Fe2O3-Doped Y-TZP
2001
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 105. |
Multimedia Approach in Education
2001
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 106. |
Interactive Multimedia As a Tool in the Teaching of Engineering Materials at University Tenaga Nasional
2001
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 107. |
Sintering and The Hydrothermal Ageing Resistance of Co- precipitated Yttria-Stabilised Zirconias
2000
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 108. |
Low Temperature Sintering of MnO2-doped Hydroxyapatite
2000
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 109. |
Effect of Grain size on the Fracture Toughness of Y-TZP Ceramics
2000
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 110. |
Mechanical & Ageing Properties of SiO2-Doped Y-TZP Ceramics
2000
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 111. |
Ageing Studies of CuO-Doped Y-TZPs
2000
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 112. |
Densification Behaviour of CuO-doped Al2O3 Ceramics
2000
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 113. |
Effect of Talc Additions on The Low-Temperature Sintering Behaviour of Electrical Porcelain.
2000
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 114. |
Sintering Behaviour of Hydroxyapatite Powders with Different Morphology
1999
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 115. |
High Temperature Sintering of Hydroxyapatite
1999
|
| 116. |
Nucleation & Growth of Polycrystalline Diamond Particles on Ceramic Substrates by Microwave Plasma CVD
1999
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 117. |
The Effects of MAPCVD-Diamond Coating on The Phase Stability and Microstructure of Zirconia (Y-TZP) Cutting Tool Inserts
1999
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 118. |
Effect of Sintering Temperature on The Grain Size of Hydroxyapatite
1999
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 119. |
Microstructure and Phase Analysis of High Strength Electrical Porcelain
1999
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 120. |
The Use of Hydroxyapatite (HA) in Orthopaedic Applications.
1999
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 121. |
Nucleation of Microwave Plasma CVD Diamond on Molybdenum (Mo) Substrate
1999
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 122. |
180. The Effects of Zirconia Additions on the Sintering Behaviour and Phase Stability of Hydroxyapatite Ceramics
1999
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 123. |
The Effect of Surface Treatment on the Nucleation and Growth of Microwave Plasma Chemical Vapour Deposited Diamond Particles
1998
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 124. |
Environmental Degradation of Yttria-Tetragonal Zirconia Polycrystals
1998
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 125. |
Effects of CuO and Al2O3 Additions on the Tetragonal Phase Stability in 2.5 mol% Y-TZP Ceramics
1998
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 126. |
Property Enhancement of Yttria-Stabilised Zirconia Through Doping with Transition Metal Oxides
1996
Author(s) : Ramesh Singh A/l Kuldip Singh |
| 127. |
Enhanced Hydrothermal and Corrosion Resistance of Y-TZP Through Doping with Low Temperature Sintering additives
1996
Author(s) : Ramesh Singh A/l Kuldip Singh |
RESEARCH PROJECT
| GRANT | PROGRESS | STATUS |
|---|---|---|
|
"Sintering Behavivour Of Synthesized Calsum Phosphate For Biomedical Applications
Researcher(s) : -, -, - |
|
end |
|
Mesoporous Tectonic Scaffolds For Tissue Engineering
|
|
end |
|
THE STUDY ON USING EGG SHELL AS A RENEWABLE CALCIUM SOURCE IN SYNTHESIZING HYDROXYLAPATITE
|
|
end |
|
Sintering And Characterization Of Forsterite Bioceramics By Microwave Method
|
|
end |
|
DEVELOPMENT OF MAGNESIUM METASILICATE CERAMIC FOR INDUSTRIAL APPLICATIONS
Researcher(s) : Professor Ir. Dr. Tan Chou Yong, Professor Ir. Dr. Farazila Binti Yusof, Professor Ir. Dr. Wong Yew Hoong, Dr Yap Boon Kar |
|
end |
RESEARCH COLLABORATOR
| GRANT | PROGRESS | STATUS |
|---|---|---|
|
Microwave Sintered Zirconia Electrolyte In Solid Oxide Fuel Cells For Electric Motor Vehicles Applications
Researcher(s) : Professor Ir. Dr. Ramesh Singh A/l Kuldip Singh, Dr Yap Boon Kar, Teng Wan Dung |
|
end |
|
Investigation Of Graded Porous Surface Oftitanium Dental Implant Produced Via Microwave Processing
|
|
end |
|
Development of miniaturize microstrip patch antenna with ferrite materials substrate
|
|
end |
|
Effect Of Biobased Additives On Durability Of Polyolefin Composite
Researcher(s) : Associate Prof. Ir. Dr. Nur Awanis Binti Hashim, Professor Ir. Dr. Ramesh Singh A/l Kuldip Singh, Md Rezaur Rahman |
|
end |
|
Low-temperature Degradation (ltd) Behaviour Of Yttria-stabilised Zirconia
Researcher(s) : Professor Ir. Dr. Tan Chou Yong, Professor Ir. Dr. Farazila Binti Yusof, Professor Ir. Dr. Ramesh Singh A/l Kuldip Singh, Harlina Misran |
|
end |
|
PURIFICATION AND CONVERSION OF LOCAL IRON ORES INTO INDUSTRIAL GRADE IRON OXIDE PIGMENTS
Researcher(s) : Professor Ir. Dr. Ramesh Singh A/l Kuldip Singh, Woon Hai Song |
|
end |