ARTICLE IN ACADEMIC JOURNALS
NO | DETAILS OF ARTICLE IN ACADEMIC JOURNALS |
---|---|
1. |
Multi-objective optimization and techno-economic evaluation of a capture/ separation/liquefaction scheme in a zero emission power/liquid N2/liquid CO2 production system based on biomass gasification and supercritical CO2 oxy-combustion cycle and ion transport membrane and Claude cycle
2023
Author(s) : Mahidzal Bin Dahari Source : SEPARATION AND PURIFICATION TECHNOLOGY DOI : 10.1016/j.seppur.2023.123566 |
2. |
Economic, environmental and multi objective optimization of a clean tri-generation system based co-firing of natural gas and biomass: An emergy evaluation
2023
Author(s) : Mahidzal Bin Dahari Source : PROCESS SAFETY AND ENVIRONMENTAL PROTECTION DOI : 10.1016/j.psep.2023.02.076 |
3. |
Numerical investigation on the performance of a solar air heater using inclined impinging jets on absorber plate with parallel and crossing orientation of nozzles
2023
Author(s) : Mahidzal Bin Dahari Source : CASE STUDIES IN THERMAL ENGINEERING DOI : 10.1016/j.csite.2023.102913 |
4. |
Thermal and hydrodynamic management of a finned-microchannel heat sink applying artificial neural network
2023
Author(s) : Mahidzal Bin Dahari Source : CASE STUDIES IN THERMAL ENGINEERING DOI : 10.1016/j.csite.2023.102996 |
5. |
An integrated sustainable system fueled by Co-Combustion of legume straw biomass and synthesis gas of SOFC: Optimization study using Signal-To-Noise ratio analysis
2023
Author(s) : Mahidzal Bin Dahari Source : APPLIED THERMAL ENGINEERING DOI : 10.1016/j.applthermaleng.2023.120853 |
6. |
Proposing linear structure for annular thermoelectric generators; thermal, exergetic, mechanical, and economic analysis
2023
Author(s) : Mahidzal Bin Dahari Source : THERMAL SCIENCE AND ENGINEERING PROGRESS DOI : 10.1016/j.tsep.2023.101932 |
7. |
A Systematic Literature Review (SLR) on Autonomous Path Planning of Unmanned Aerial Vehicles
2023
Source : DRONES DOI : 10.3390/drones7020118 |
8. |
Thermal process simulation and multi-variable study/optimization of a novel geothermal-driven multi-generation process using bi-evaporator with zeotropic mixture
2023
Author(s) : Mahidzal Bin Dahari Source : CASE STUDIES IN THERMAL ENGINEERING DOI : 10.1016/j.csite.2023.102790 |
9. |
Management of heat transfer and hydraulic characteristics of a micro-channel heat sink with various arrangements of rectangular vortex generators utilizing artificial neural network and response surface methodology
2023
Author(s) : Mahidzal Bin Dahari Source : CASE STUDIES IN THERMAL ENGINEERING DOI : 10.1016/j.csite.2023.102850 |
10. |
Optimization and evaluation of a municipal solid waste-to-energy system using taguchi technique in a tri-generation system based on gas turbine with air and steam agents
2023
Author(s) : Mahidzal Bin Dahari Source : PROCESS SAFETY AND ENVIRONMENTAL PROTECTION DOI : 10.1016/j.psep.2023.03.037 |
11. |
A novel heat recovery for a marine diesel engine with power and cooling outputs; exergetic, economic, and net present value investigation and multi-criteria NSGA-II optimization
2023
Author(s) : Mahidzal Bin Dahari Source : AIN SHAMS ENGINEERING JOURNAL DOI : 10.1016/j.asej.2022.1020672090-4479 |
12. |
Efficient heat extraction from the storage zone of solar pond by structurally improved spiral pipes; numerical simulation/experimental validation
2022
Author(s) : Mahidzal Bin Dahari Source : Energy Reports DOI : 10.1016/j.egyr.2022.05.247 |
13. |
Optimal performance of data transmission between Malaysia-China for VLBI-based radio astronomy observation using Jive5ab
2022
Author(s) : Noraisyah Binti Mohamed Shah,Zamri Bin Zainal Abidin,Mahidzal Bin Dahari,Farah Ramadhani Source : Experimental Astronomy DOI : 10.1007/s10686-022-09838-9 |
14. |
Employing numerical method for evaluating the heat transfer rate of a hot tube by nanofluid natural convection
2022
Author(s) : Mahidzal Bin Dahari Source : Case Studies in Thermal Engineering DOI : 10.1016/j.csite.2022.102006 |
15. |
Heat transfer efficiency optimization of a multi-nozzle micro-channel heat sink utilizing response surface methodology
2022
Author(s) : Mahidzal Bin Dahari Source : Case Studies in Thermal Engineering DOI : 10.1016/j.csite.2022.102266 |
16. |
Heat transfer improvement between a pair of heater and cooler inside an energy storage by using nano-encapsulated phase change material/water: A numerical modeling
2022
Author(s) : Mahidzal Bin Dahari Source : Case Studies in Thermal Engineering DOI : 10.1016/j.csite.2022.101770 |
17. |
Control system performance of a 7.3-meter radio telescope converted from telecommunication antenna to radio astronomy purposes in Malaysia
2022
Author(s) : Noraisyah Binti Mohamed Shah,Zamri Bin Zainal Abidin,Mahidzal Bin Dahari,Juan Carlos Algaba Marcos,Farah Ramadhani Source : JOURNAL OF ASTRONOMICAL TELESCOPES INSTRUMENTS AND SYSTEMS DOI : 10.1117/1.JATIS.8.3.037001 |
18. |
Examining the relationship between gas channel dimensions of a polymer electrolyte membrane fuel cell with two-phase flow dynamics in a flooding situation using the volume of fluid method
2022
Author(s) : Mahidzal Bin Dahari Source : Energy Reports DOI : 10.1016/j.egyr.2022.07.048 |
19. |
Automated object detection on aerial images for limited capacity embedded device using a lightweight CNN model
2022
Author(s) : Anis Salwa Binti Mohd Khairuddin,Mahidzal Bin Dahari Source : Alexandria Engineering Journal DOI : 10.1016/j.aej.2021.11.027 |
20. |
Improvement of cooling of a high heat flux CPU by employing a cooper foam and NEPCM/water suspension
2022
Author(s) : Mahidzal Bin Dahari Source : Journal of Energy Storage DOI : 10.1016/j.est.2022.105682 |
21. |
Automated object detection on aerial images for limited capacity embedded device using a lightweight CNN model
2022
Author(s) : Anis Salwa Binti Mohd Khairuddin,Mahidzal Bin Dahari Source : ALEXANDRIA ENGINEERING JOURNAL DOI : 10.1016/j.aej.2021.11.0271110-0168 |
22. |
Efficient heat extraction from the storage zone of solar pond by structurally improved spiral pipes; numerical simulation/experimental validation
2022
Author(s) : Mahidzal Bin Dahari Source : ENERGY REPORTS DOI : 10.1016/j.egyr.2022.05.247 |
23. |
Examining the relationship between gas channel dimensions of a polymer electrolyte membrane fuel cell with two-phase flow dynamics in a flooding situation using the volume of fluid method
2022
Author(s) : Mahidzal Bin Dahari Source : ENERGY REPORTS DOI : 10.1016/j.egyr.2022.07.048 |
24. |
Designing a system for battery thermal management: Cooling LIBs by nano-encapsulated phase change material
2022
Author(s) : Mahidzal Bin Dahari Source : Case Studies in Thermal Engineering DOI : 10.1016/j.csite.2022.101943 |
25. |
Permanent Magnet Synchronous Generator design optimization for wind energy conversion system: A review
2022
Author(s) : Mahidzal Bin Dahari Source : Energy Reports DOI : 10.1016/j.egyr.2022.10.239 |
26. |
Using artificial neural network to optimize hydrogen solubility and evaluation of environmental condition effects
2022
Author(s) : Mahidzal Bin Dahari Source : International Journal of Low-Carbon Technologies DOI : 10.1093/ijlct/ctab088 |
27. |
Optimal performance of data transmission between Malaysia-China for VLBI-based radio astronomy observation using Jive5ab
2022
Author(s) : Noraisyah Binti Mohamed Shah,Zamri Bin Zainal Abidin,Mahidzal Bin Dahari,Farah Ramadhani Source : EXPERIMENTAL ASTRONOMY DOI : 10.1007/s10686-022-09838-9 |
28. |
Free convection to cool a hot square block by embedding in center of a chamber by nanofluid and magnetohydrodynamic
2022
Author(s) : Mahidzal Bin Dahari Source : Case Studies in Thermal Engineering DOI : 10.1016/j.csite.2022.101980 |
29. |
Using natural convection mechanism of nanofluid for cooling an embedded hot plate in corner of a square enclosure: A numerical simulation
2022
Author(s) : Mahidzal Bin Dahari Source : Case Studies in Thermal Engineering DOI : 10.1016/j.csite.2022.101926 |
30. |
Examination and optimization of a novel auxiliary trigeneration system for a ship through waste-to-energy from its engine
2022
Author(s) : Mahidzal Bin Dahari Source : Case Studies in Thermal Engineering DOI : 10.1016/j.csite.2022.101860 |
31. |
Cooling a Hot Semiannulus with Constant Heat Flux by Using Fe3O4 -Water Nanofluid and a Magnetic Field: Natural Convection Mechanism
2022
Author(s) : Mahidzal Bin Dahari Source : Journal of Nanomaterials DOI : 10.1155/2022/4761989 |
32. |
Receiving heat from a PCM tank by using natural convection of water and NEPCM: A simulation for LHTES application
2022
Author(s) : Mahidzal Bin Dahari Source : Case Studies in Thermal Engineering DOI : 10.1016/j.csite.2022.102123 |
33. |
Thermo-hydraulic performance in ceramic-made microchannel heat sinks with an optimum fin geometry
2022
Author(s) : Mahidzal Bin Dahari Source : Case Studies in Thermal Engineering DOI : 10.1016/j.csite.2022.102230 |
34. |
Automatic detection of oil palm fruits from UAV images using an improved YOLO model
2022
Author(s) : Anis Salwa Binti Mohd Khairuddin,Mahidzal Bin Dahari Source : Visual Computer DOI : 10.1007/s00371-021-02116-3 |
35. |
An optimized YOLO-based object detection model for crop harvesting system
2021
Author(s) : Anis Salwa Binti Mohd Khairuddin,Mahidzal Bin Dahari Source : IET IMAGE PROCESSING DOI : 10.1049/ipr2.12181 |
36. |
Waste heat from a biomass fueled gas turbine for power generation via an ORC or compressor inlet cooling via an absorption refrigeration cycle: A thermoeconomic comparison
2021
Author(s) : Mahidzal Bin Dahari Source : APPLIED THERMAL ENGINEERING DOI : 10.1016/j.applthermaleng.2020.116117 |
37. |
Assessment of a novel system utilizing gases exhausted from a ship's engine for power, cooling, and desalinated water generation
2021
Author(s) : Mahidzal Bin Dahari Source : APPLIED THERMAL ENGINEERING DOI : 10.1016/j.applthermaleng.2020.116177 |
38. |
An innovative double-flash binary cogeneration cooling and power (CCP) system: Thermodynamic evaluation and multi-objective optimization
2021
Author(s) : Mahidzal Bin Dahari Source : ENERGY DOI : 10.1016/j.energy.2020.118864 |
39. |
Thermal analysis of a binary base fluid in pool boiling system of glycol-water alumina nano-suspension
2021
Author(s) : Mahidzal Bin Dahari Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY DOI : 10.1007/s10973-020-09911-5 |
40. |
Energy, exergy, and exergoeconomic evaluation of a novel CCP system based on a solid oxide fuel cell integrated with absorption and ejector refrigeration cycles
2021
Author(s) : Mahidzal Bin Dahari Source : THERMAL SCIENCE AND ENGINEERING PROGRESS DOI : 10.1016/j.tsep.2020.100755 |
41. |
Observation the melting process of the phase change material inside a half-cylindrical with thermal non-equilibrium porous media: CFD simulation
2021
Author(s) : Mahidzal Bin Dahari Source : CASE STUDIES IN THERMAL ENGINEERING DOI : 10.1016/j.csite.2021.101496 |
42. |
Thermodynamic and exergoeconomic analyses and optimization of an auxiliary tri-generation system for a ship utilizing exhaust gases from its engine
2021
Author(s) : Mahidzal Bin Dahari Source : JOURNAL OF CLEANER PRODUCTION DOI : 10.1016/j.jclepro.2020.125012 |
43. |
Heating a cold semi-annulus wall by MHD natural convetion with nanofluid
2021
Author(s) : Mahidzal Bin Dahari Source : CASE STUDIES IN THERMAL ENGINEERING DOI : 10.1016/j.csite.2021.101569 |
44. |
Assessment of a novel system utilizing gases exhausted from a ship's engine for power, cooling, and desalinated water generation
2021
Author(s) : Mahidzal Bin Dahari Source : Applied Thermal Engineering DOI : 10.1016/j.applthermaleng.2020.116177 |
45. |
Heating a cold semi-annulus wall by MHD natural convetion with nanofluid
2021
Author(s) : Mahidzal Bin Dahari Source : Case Studies in Thermal Engineering DOI : 10.1016/j.csite.2021.101569 |
46. |
Radio quiet and radio notification zones characteristics for radio astronomy in medium densely populated areas and humid tropical countries
2021
Author(s) : Ungku Ferwani Salwa Binti Ungku Ibrahim,Noraisyah Binti Mohamed Shah,Zamri Bin Zainal Abidin,Norsiah Binti Hashim,Mahidzal Bin Dahari,Farah Ramadhani Source : JOURNAL OF ASTRONOMICAL TELESCOPES INSTRUMENTS AND SYSTEMS DOI : 10.1117/1.JATIS.7.2.027001 |
47. |
Waste heat from a biomass fueled gas turbine for power generation via an ORC or compressor inlet cooling via an absorption refrigeration cycle: A thermoeconomic comparison
2021
Author(s) : Mahidzal Bin Dahari Source : Applied Thermal Engineering DOI : 10.1016/j.applthermaleng.2020.116117 |
48. |
Automatic detection of oil palm fruits from UAV images using an improved YOLO model
2021
Author(s) : Anis Salwa Binti Mohd Khairuddin,Mahidzal Bin Dahari Source : VISUAL COMPUTER DOI : 10.1007/s00371-021-02116-3 |
49. |
Energy, exergy, and exergoeconomic evaluation of a novel CCP system based on a solid oxide fuel cell integrated with absorption and ejector refrigeration cycles
2021
Author(s) : Mahidzal Bin Dahari Source : Thermal Science and Engineering Progress DOI : 10.1016/j.tsep.2020.100755 |
50. |
Automatic detection of oil palm fruits from UAV images using an improved YOLO model
2021
Author(s) : Anis Salwa Binti Mohd Khairuddin,Mahidzal Bin Dahari Source : VISUAL COMPUTER DOI : 10.1007/s00371-021-02116-3 |
51. |
Radio quiet and radio notification zones characteristics for radio astronomy in medium densely populated areas and humid tropical countries
2021
Author(s) : Noraisyah Binti Mohamed Shah,Zamri Bin Zainal Abidin,Norsiah Binti Hashim,Mahidzal Bin Dahari,Farah Ramadhani Source : Journal of Astronomical Telescopes, Instruments, and Systems DOI : 10.1117/1.JATIS.7.2.027001 |
52. |
MHD natural convection nanofluid flow in a heat exchanger: Effects of Brownian motion and thermophoresis for nanoparticles distribution
2021
Author(s) : Mahidzal Bin Dahari Source : CASE STUDIES IN THERMAL ENGINEERING DOI : 10.1016/j.csite.2021.101394 |
53. |
MHD natural convection nanofluid flow in a heat exchanger: Effects of Brownian motion and thermophoresis for nanoparticles distribution
2021
Author(s) : Mahidzal Bin Dahari Source : Case Studies in Thermal Engineering DOI : 10.1016/j.csite.2021.101394 |
54. |
Thermal analysis of a binary base fluid in pool boiling system of glycol–water alumina nano-suspension
2021
Author(s) : Mahidzal Bin Dahari Source : Journal of Thermal Analysis and Calorimetry DOI : 10.1007/s10973-020-09911-5 |
55. |
An innovative double-flash binary cogeneration cooling and power (CCP) system: Thermodynamic evaluation and multi-objective optimization
2021
Author(s) : Mahidzal Bin Dahari Source : Energy DOI : 10.1016/j.energy.2020.118864 |
56. |
An optimized YOLO-based object detection model for crop harvesting system
2021
Author(s) : Anis Salwa Binti Mohd Khairuddin,Mahidzal Bin Dahari Source : IET Image Processing DOI : 10.1049/ipr2.12181 |
57. |
Thermodynamic and exergoeconomic analyses and optimization of an auxiliary tri-generation system for a ship utilizing exhaust gases from its engine
2021
Author(s) : Mahidzal Bin Dahari Source : Journal of Cleaner Production DOI : 10.1016/j.jclepro.2020.125012 |
58. |
An innovative double-flash binary cogeneration cooling and power (CCP) system: Thermodynamic evaluation and multi-objective optimization
2020
Author(s) : Mahidzal Bin Dahari Source : Energy |
59. |
Investigation on the laminar flame speed of CH4/CO2/air mixture at atmospheric and high pressures using Schlieren photography
2020
Author(s) : Mahidzal Bin Dahari Source : INTERNATIONAL JOURNAL OF HYDROGEN ENERGY DOI : 10.1016/j.ijhydene.2020.08.061 |
60. |
Performance enhancement and multi-objective optimization of a solar-driven setup with storage process using an innovative modification
2020
Author(s) : Mahidzal Bin Dahari Source : JOURNAL OF ENERGY STORAGE DOI : 10.1016/j.est.2020.101956 |
61. |
Second law analysis of hybrid nanofluid flow in a microchannel heat sink integrated with ribs and secondary channels for utilization in miniature thermal devices
2020
Author(s) : Mahidzal Bin Dahari Source : CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION DOI : 10.1016/j.cep.2020.107963 |
62. |
Investigation on the laminar flame speed of CH4/CO2/air mixture at atmospheric and high pressures using Schlieren photography
2020
Author(s) : Mahidzal Bin Dahari Source : International Journal of Hydrogen Energy |
63. |
Thermodynamic and exergoeconomic analyses and optimization of an auxiliary tri-generation system for a ship utilizing exhaust gases from its engine
2020
Author(s) : Mahidzal Bin Dahari Source : Journal of Cleaner Production |
64. |
Experimental investigation on drag reduction of flowing crop suspensions of the pulp fibers in circular pipe heat exchanger
2020
Author(s) : Mohd Nashrul Bin Mohd Zubir,Kazi Md. Salim Newaz,Mahidzal Bin Dahari,Tuan Zaharinie Binti Tuan Zahari Source : PARTICULATE SCIENCE AND TECHNOLOGY DOI : 10.1080/02726351.2018.1564093 |
65. |
Performance enhancement and multi-objective optimization of a solar-driven setup with storage process using an innovative modification
2020
Author(s) : Mahidzal Bin Dahari Source : JOURNAL OF ENERGY STORAGE |
66. |
Experimental investigation on drag reduction of flowing crop suspensions of the pulp fibers in circular pipe heat exchanger
2020
Author(s) : Mohd Nashrul Bin Mohd Zubir,Kazi Md. Salim Newaz,Mahidzal Bin Dahari,Tuan Zaharinie Binti Tuan Zahari Source : PARTICULATE SCIENCE AND TECHNOLOGY DOI : 10.1080/02726351.2018.1564093 |
67. |
Performance enhancement and multi-objective optimization of a solar-driven setup with storage process using an innovative modification
2020
Author(s) : Mahidzal Bin Dahari Source : Journal of Energy Storage DOI : 10.1016/j.est.2020.101956 |
68. |
Effect of the Hall currents and thermal radiation on the flow of a nanofluid through a vertical rotating channel
2020
Author(s) : Mahidzal Bin Dahari Source : MATHEMATICAL METHODS IN THE APPLIED SCIENCES DOI : 10.1002/mma.6986 |
69. |
Effect of the Hall currents and thermal radiation on the flow of a nanofluid through a vertical rotating channel
2020
Author(s) : Mahidzal Bin Dahari Source : Mathematical Methods in the Applied Sciences DOI : 10.1002/mma.6986 |
70. |
Thermal analysis of a binary base fluid in pool boiling system of glycol-water alumina nano-suspension
2020
Author(s) : Mahidzal Bin Dahari Source : Journal of Thermal Analysis and Calorimetry |
71. |
Experimental investigation on drag reduction of flowing crop suspensions of the pulp fibers in circular pipe heat exchanger
2020
Author(s) : Mahidzal Bin Dahari Source : PARTICULATE SCIENCE AND TECHNOLOGY |
72. |
Second law analysis of hybrid nanofluid flow in a microchannel heat sink integrated with ribs and secondary channels for utilization in miniature thermal devices
2020
Author(s) : Mahidzal Bin Dahari Source : CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION |
73. |
Heat and fluid flow analysis of metal foam embedded in a double-layered sinusoidal heat sink under local thermal non-equilibrium condition using nanofluid
2019
Author(s) : Mahidzal Bin Dahari Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY |
74. |
Heat transfer and fluid flow of pseudo-plastic nanofluid over a moving permeable plate with viscous dissipation and heat absorption/generation
2019
Author(s) : Mahidzal Bin Dahari Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY |
75. |
Heat transfer and fluid flow of pseudo-plastic nanofluid over a moving permeable plate with viscous dissipation and heat absorption/generation
2019
Author(s) : Mahidzal Bin Dahari Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY |
76. |
Using ANFIS technique for PEM fuel cell electric bicycle prediction model
2019
Author(s) : Mahidzal Bin Dahari Source : INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY |
77. |
TOWARD IMPROVED HEAT DISSIPATION OF THE TURBULENT REGIME OVER BACKWARD-FACING STEP FOR THE Al2O3-WATER NANOFLUIDS: An Experimental Approach
2019
Author(s) : Mahidzal Bin Dahari Source : THERMAL SCIENCE |
78. |
Thermohydraulics of the liquid films in rotating heat pipes
2019
Author(s) : Mahidzal Bin Dahari Source : INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW |
79. |
Heat and fluid flow analysis of metal foam embedded in a double-layered sinusoidal heat sink under local thermal non-equilibrium condition using nanofluid
2019
Author(s) : Mahidzal Bin Dahari Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY |
80. |
Thermohydraulics of the liquid films in rotating heat pipes
2019
Author(s) : Mahidzal Bin Dahari Source : INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW DOI : 10.1108/HFF-02-2019-0097 |
81. |
Using ANFIS technique for PEM fuel cell electric bicycle prediction model
2019
Author(s) : Mahidzal Bin Dahari Source : INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY |
82. |
TOWARD IMPROVED HEAT DISSIPATION OF THE TURBULENT REGIME OVER BACKWARD-FACING STEP FOR THE Al2O3-WATER NANOFLUIDS: An Experimental Approach
2019
Author(s) : Mohd Nashrul Bin Mohd Zubir,Mohamad Sofian Bin Abu Talip,Suriani Binti Ibrahim,Kazi Md. Salim Newaz,Mahidzal Bin Dahari,Zaira Zaman Chowdhury Source : THERMAL SCIENCE |
83. |
Development of a new density correlation for carbon-based nanofluids using response surface methodology
2018
Author(s) : Mahidzal Bin Dahari Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY |
84. |
Effect of various refining processes for Kenaf Bast non-wood pulp fibers suspensions on heat transfer coefficient in circular pipe heat exchanger
2018
Author(s) : Mohd Nashrul Bin Mohd Zubir,Kazi Md. Salim Newaz,Mahidzal Bin Dahari,Mohd Sayuti Bin Ab Karim Source : HEAT AND MASS TRANSFER DOI : 10.1007/s00231-017-2176-3 |
85. |
Effect of various refining processes for Kenaf Bast non-wood pulp fibers suspensions on heat transfer coefficient in circular pipe heat exchanger
2018
Author(s) : Mahidzal Bin Dahari Source : HEAT AND MASS TRANSFER |
86. |
Development of a new density correlation for carbon-based nanofluids using response surface methodology
2018
Author(s) : Mahidzal Bin Dahari Source : JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY |
87. |
Experimental study on thermo-physical and rheological properties of stable and green reduced graphene oxide nanofluids: Hydrothermal assisted technique
2017
Author(s) : Mohd Nashrul Bin Mohd Zubir,Mahidzal Bin Dahari Source : JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY DOI : 10.1080/01932691.2016.1234387 |
88. |
Study of environmentally friendly and facile functionalization of graphene nanoplatelet and its application in convective heat transfer
2017
Author(s) : Mahidzal Bin Dahari Source : ENERGY CONVERSION AND MANAGEMENT |
89. |
ANFIS modeling to predict the friction forces in CNC guideways and servomotor currents in the feed drive system to be employed in lubrication control system
2017
Author(s) : Mahidzal Bin Dahari Source : JOURNAL OF MANUFACTURING PROCESSES |
90. |
The variation of work productivity and muscle activities at different levels of production target
2017
Author(s) : Mahidzal Bin Dahari Source : IOP Conference Series: Materials Science and Engineering |
91. |
An Investigation into a Gear-Based Knee Joint Designed for Lower Limb Prosthesis
2017
Author(s) : Mahidzal Bin Dahari Source : APPLIED BIONICS AND BIOMECHANICS |
92. |
Dynamic fuzzy cognitive network approach for modelling and control of PEM fuel cell for power electric bicycle system
2017
Author(s) : Mahidzal Bin Dahari Source : APPLIED ENERGY |
93. |
Convective heat transfer enhancement with graphene nanoplatelet/platinum hybrid nanofluid
2017
Author(s) : Mahidzal Bin Dahari Source : INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
94. |
A new experiential learning electromagnetism-like mechanism for numerical optimization
2017
Author(s) : Mahidzal Bin Dahari Source : EXPERT SYSTEMS WITH APPLICATIONS |
95. |
Experimental study on thermo-physical and rheological properties of stable and green reduced graphene oxide nanofluids: Hydrothermal assisted technique
2017
Author(s) : Mahidzal Bin Dahari Source : JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY |
96. |
Optimization, modeling and accurate prediction of thermal conductivity and dynamic viscosity of stabilized ethylene glycol and water mixture Al2O3 nanofluids by NSGA-II using ANN
2017
Author(s) : Mahidzal Bin Dahari Source : INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
97. |
A novel, eco-friendly technique for covalent functionalization of graphene nanoplatelets and the potential of their nanofluids for heat transfer applications
2017
Author(s) : Mahidzal Bin Dahari Source : CHEMICAL PHYSICS LETTERS |
98. |
Analysis of the Effect of Search Step Size on the Accuracy and Convergence Properties of Electromagnetism-Like Mechanism Algorithm
2017
Author(s) : Mahidzal Bin Dahari Source : JOURNAL OF MULTIPLE-VALUED LOGIC AND SOFT COMPUTING |
99. |
The mediating effects of muscle activities on the relationship of production standard time and work productivity
2017
Author(s) : Mahidzal Bin Dahari Source : IOP Conference Series: Materials Science and Engineering |
100. |
An Investigation into a Gear-Based Knee Joint Designed for Lower Limb Prosthesis
2017
Source : APPLIED BIONICS AND BIOMECHANICS DOI : 10.1155/2017/7595642 |
101. |
ANFIS modeling to predict the friction forces in CNC guideways and servomotor currents in the feed drive system to be employed in lubrication control system
2017
Author(s) : Mohd Hamdi Bin Abd Shukor,Mahidzal Bin Dahari Source : JOURNAL OF MANUFACTURING PROCESSES DOI : 10.1016/j.jmapro.2017.05.020 |
102. |
Dynamic fuzzy cognitive network approach for modelling and control of PEM fuel cell for power electric bicycle system
2017
Author(s) : Mahidzal Bin Dahari Source : APPLIED ENERGY |
103. |
An Investigation into a Gear-Based Knee Joint Designed for Lower Limb Prosthesis
2017
Author(s) : Imtiaz Ahmed Choudhury,Mahidzal Bin Dahari Source : APPLIED BIONICS AND BIOMECHANICS |
104. |
A novel, eco-friendly technique for covalent functionalization of graphene nanoplatelets and the potential of their nanofluids for heat transfer applications
2017
Source : CHEMICAL PHYSICS LETTERS DOI : 10.1016/j.cplett.2017.02.077 |
105. |
Convective heat transfer enhancement with graphene nanoplatelet/platinum hybrid nanofluid
2017
Author(s) : Mahidzal Bin Dahari Source : INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
106. |
Study of environmentally friendly and facile functionalization of graphene nanoplatelet and its application in convective heat transfer
2017
Source : ENERGY CONVERSION AND MANAGEMENT DOI : 10.1016/j.enconman.2017.07.036 |
107. |
A new experiential learning electromagnetism-like mechanism for numerical optimization
2017
Author(s) : Mahidzal Bin Dahari Source : EXPERT SYSTEMS WITH APPLICATIONS |
108. |
Analysis of the Effect of Search Step Size on the Accuracy and Convergence Properties of Electromagnetism-Like Mechanism Algorithm
2017
Author(s) : Mahidzal Bin Dahari Source : JOURNAL OF MULTIPLE-VALUED LOGIC AND SOFT COMPUTING |
109. |
Optimization, modeling and accurate prediction of thermal conductivity and dynamic viscosity of stabilized ethylene glycol and water mixture Al2O3 nanofluids by NSGA-II using ANN
2017
Author(s) : Mahidzal Bin Dahari Source : INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
110. |
An experimental study on viscosity of alumina-engine oil: Effects of temperature and nanoparticles concentration
2016
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
111. |
Estimation of thermal conductivity of Al2O3/water (40%)-ethylene glycol (60%) by artificial neural network and correlation using experimental data
2016
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
112. |
Dynamic modelling of PEM fuel cell of power electric bicycle system
2016
Author(s) : Mahidzal Bin Dahari Source : International Journal of Hydrogen Energy |
113. |
Fiber Bragg Gratings Hydrogen Sensor for Monitoring the Degradation of Transformer Oil
2016
Author(s) : Faisal Rafiq Bin Mahamd Adikan,Mahidzal Bin Dahari Source : Ieee Sensors Journal |
114. |
Investigation of rib\s height effect on heat transfer and flow parameters of laminar water-Al2O3 nanofluid in a rib-microchannel
2016
Author(s) : Mahidzal Bin Dahari Source : Applied Mathematics and Computation |
115. |
Evaluation of criteria for CO2 capture and storage in the iron and steel industry using the 2-tuple DEMATEL technique
2016
Author(s) : Raja Ariffin Bin Raja Ghazilla,Mahidzal Bin Dahari Source : Journal of Cleaner Production |
116. |
Nanofluid based on activated hybrid of biomass carbon/graphene oxide: Synthesis, thermo-physical and electrical properties
2016
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
117. |
Application of acoustic emission sensor to investigate the frequency of tool wear and plastic deformation in tool condition monitoring
2016
Author(s) : Mahidzal Bin Dahari Source : Measurement |
118. |
Experimental investigation of thermo-physical properties, convective heat transfer and pressure drop of functionalized graphene nanoplatelets aqueous nanofluid in a square heated pipe
2016
Author(s) : Mahidzal Bin Dahari Source : Energy Conversion and Management |
119. |
Investigation of heat transfer performance and friction factor of a counter-flow double-pipe heat exchanger using nitrogen-doped, graphene-based nanofluids
2016
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
120. |
A review on the current progress of metal hydrides material for solid-state hydrogen storage applications
2016
Author(s) : Mahidzal Bin Dahari Source : International Journal of Hydrogen Energy |
121. |
Experimental investigation of thermo-physical properties, convective heat transfer and pressure drop of functionalized graphene nanoplatelets aqueous nanofluid in a square heated pipe
2016
Author(s) : Mahidzal Bin Dahari Source : Energy Conversion and Management |
122. |
Modeling of commercial proton exchange membrane fuel cell using support vector machine
2016
Author(s) : Mahidzal Bin Dahari Source : International Journal of Hydrogen Energy |
123. |
An Investigation into Turning of ASSAB-705 Steel Using Multiple Sensors
2016
Author(s) : Imtiaz Ahmed Choudhury,Mahidzal Bin Dahari Source : Materials and Manufacturing Processes |
124. |
Study of synthesis, stability and thermo-physical properties of graphene nanoplatelet/platinum hybrid nanofluid
2016
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
125. |
Estimation of thermal conductivity of Al2O3/water (40%)-ethylene glycol (60%) by artificial neural network and correlation using experimental data
2016
Author(s) : Mahidzal Bin Dahari,Masoud Sarraf Source : International Communications in Heat and Mass Transfer |
126. |
Prediction of dynamic viscosity of a hybrid nano-lubricant by an optimal artificial neural network
2016
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
127. |
Investigation of heat transfer performance and friction factor of a counter-flow double-pipe heat exchanger using nitrogen-doped, graphene-based nanofluids
2016
Author(s) : Mahidzal Bin Dahari,Mohammad Mehrali Source : International Communications in Heat and Mass Transfer |
128. |
An improved electromagnetism-like algorithm for numerical optimization
2016
Author(s) : Mahidzal Bin Dahari Source : Theoretical Computer Science |
129. |
Particle size and type effects on heat transfer enhancement of Ferro-nanofluids in a pulsating heat pipe
2016
Author(s) : Mahidzal Bin Dahari Source : Powder Technology |
130. |
Study of synthesis, stability and thermo-physical properties of graphene nanoplatelet/platinum hybrid nanofluid
2016
Author(s) : Mahidzal Bin Dahari,Houman Yarmand Source : International Communications in Heat and Mass Transfer |
131. |
Effects of temperature and concentration on rheological behavior of MWCNTs/SiO2(20-80)-SAE40 hybrid nano-lubricant
2016
Author(s) : Mahidzal Bin Dahari,Houman Yarmand Source : International Communications in Heat and Mass Transfer |
132. |
Nanofluid based on activated hybrid of biomass carbon/graphene oxide: Synthesis, thermo-physical and electrical properties
2016
Author(s) : Mahidzal Bin Dahari,Houman Yarmand Source : International Communications in Heat and Mass Transfer |
133. |
Slip flow forced convection through microducts of arbitrary cross-section: Heat and momentum analogy
2016
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
134. |
Viscosity of nanofluids: A review of recent experimental studies
2016
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
135. |
Experimental investigation of thermo-physical properties, convective heat transfer and pressure drop of functionalized graphene nanoplatelets aqueous nanofluid in a square heated pipe
2016
Author(s) : Mahidzal Bin Dahari,Houman Yarmand Source : Energy Conversion and Management |
136. |
Slip flow forced convection through microducts of arbitrary cross-section: Heat and momentum analogy
2016
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
137. |
An improved electromagnetism-like algorithm for numerical optimization
2016
Author(s) : Mahidzal Bin Dahari Source : Theoretical Computer Science |
138. |
Experimental study on the effect of inclination angle on heat transfer enhancement of a ferrofluid in a closed loop oscillating heat pipe under magnetic field
2016
Author(s) : Mahidzal Bin Dahari Source : Experimental Thermal and Fluid Science |
139. |
Evaluation of criteria for CO2 capture and storage in the iron and steel industry using the 2-tuple DEMATEL technique
2016
Author(s) : Mahidzal Bin Dahari Source : Journal of Cleaner Production |
140. |
Prediction of dynamic viscosity of a hybrid nano-lubricant by an optimal artificial neural network
2016
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
141. |
A review on the current progress of metal hydrides material for solid-state hydrogen storage applications
2016
Author(s) : Mahidzal Bin Dahari Source : International Journal of Hydrogen Energy |
142. |
Modeling of commercial proton exchange membrane fuel cell using support vector machine
2016
Author(s) : Mahidzal Bin Dahari Source : International Journal of Hydrogen Energy |
143. |
Investigation of rib\s height effect on heat transfer and flow parameters of laminar water-Al2O3 nanofluid in a rib-microchannel
2016
Author(s) : Mahidzal Bin Dahari Source : Applied Mathematics and Computation |
144. |
Effects of temperature and concentration on rheological behavior of MWCNTs/SiO2(20-80)-SAE40 hybrid nano-lubricant
2016
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
145. |
Cutting force analysis to estimate the friction force in linear guideways of CNC machine
2016
Author(s) : Mahidzal Bin Dahari Source : Measurement |
146. |
Particle size and type effects on heat transfer enhancement of Ferro-nanofluids in a pulsating heat pipe
2016
Author(s) : Mahidzal Bin Dahari Source : Powder Technology |
147. |
Viscosity of nanofluids: A review of recent experimental studies
2016
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
148. |
Fiber Bragg Gratings (FBG) Hydrogen Sensor for Monitoring the Degradation of Transformer Oil
2016
Author(s) : Mahidzal Bin Dahari Source : IEEE Sensors Journal |
149. |
An experimental study on viscosity of alumina-engine oil: Effects of temperature and nanoparticles concentration
2016
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
150. |
Application of acoustic emission sensor to investigate the frequency of tool wear and plastic deformation in tool condition monitoring
2016
Author(s) : Imtiaz Ahmed Choudhury,Mahidzal Bin Dahari Source : Measurement: Journal of the International Measurement Confederation |
151. |
Effects of temperature and concentration on rheological behavior of MWCNTs/SiO2(20-80)-SAE40 hybrid nano-lubricant
2016
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
152. |
Estimation of thermal conductivity of Al2O3/water (40%)-ethylene glycol (60%) by artificial neural network and correlation using experimental data
2016
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
153. |
Slip flow forced convection through microducts of arbitrary cross-section: Heat and momentum analogy
2016
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
154. |
Experimental study on the effect of inclination angle on heat transfer enhancement of a ferrofluid in a closed loop oscillating heat pipe under magnetic field
2016
Author(s) : Mahidzal Bin Dahari Source : Experimental Thermal and Fluid Science |
155. |
Viscosity of nanofluids: A review of recent experimental studies
2016
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
156. |
An Investigation into Turning of ASSAB-705 Steel Using Multiple Sensors
2016
Author(s) : Imtiaz Ahmed Choudhury,Mahidzal Bin Dahari Source : Materials and Manufacturing Processes |
157. |
Cutting force analysis to estimate the friction force in linear guideways of CNC machine
2016
Source : MEASUREMENT DOI : 10.1016/j.measurement.2016.02.017 |
158. |
An Investigation into Turning of ASSAB-705 Steel Using Multiple Sensors
2016
Author(s) : Mahidzal Bin Dahari Source : Materials and Manufacturing Processes |
159. |
Predicting the viscosity of multi-walled carbon nanotubes/water nanofluid by developing an optimal artificial neural network based on experimental data
2016
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
160. |
An experimental study on viscosity of alumina-engine oil: Effects of temperature and nanoparticles concentration
2016
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
161. |
Fiber Bragg Gratings Hydrogen Sensor for Monitoring the Degradation of Transformer Oil
2016
Author(s) : Mahidzal Bin Dahari Source : IEEE Sensors Journal |
162. |
Application of acoustic emission sensor to investigate the frequency of tool wear and plastic deformation in tool condition monitoring
2016
Author(s) : Imtiaz Ahmed Choudhury,Mahidzal Bin Dahari Source : Measurement |
163. |
Experimental study on the effect of inclination angle on heat transfer enhancement of a ferrofluid in a closed loop oscillating heat pipe under magnetic field
2016
Author(s) : Mahidzal Bin Dahari Source : Experimental Thermal and Fluid Science |
164. |
Evaluation of criteria for CO2 capture and storage in the iron and steel industry using the 2-tuple DEMATEL technique
2016
Author(s) : Raja Ariffin Bin Raja Ghazilla,Mahidzal Bin Dahari Source : Journal of Cleaner Production |
165. |
Dynamic modelling of PEM fuel cell of power electric bicycle system
2016
Author(s) : Mahidzal Bin Dahari Source : International Journal of Hydrogen Energy |
166. |
Cutting force analysis to estimate the friction force in linear guideways of CNC machine
2016
Author(s) : Mahidzal Bin Dahari Source : Measurement: Journal of the International Measurement Confederation |
167. |
Predicting the viscosity of multi-walled carbon nanotubes/water nanofluid by developing an optimal artificial neural network based on experimental data
2016
Author(s) : Mahidzal Bin Dahari,Houman Yarmand Source : International Communications in Heat and Mass Transfer |
168. |
A Comprehensive Review of Milk Fouling on Heated Surfaces
2015
Author(s) : Mahidzal Bin Dahari Source : Critical Reviews in Food Science and Nutrition |
169. |
On numerical study of calcium sulphate fouling under sub-cooled flow boiling conditions
2015
Author(s) : Mahidzal Bin Dahari Source : Applied Thermal Engineering |
170. |
Forced convective heat transfer of water/functionalized multi-walled carbon nanotube nanofluids in a microchannel with oscillating heat flux and slip boundary condition
2015
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
171. |
Effect of magnetic field on the heat transfer rate of kerosene/Fe2O3 nanofluid in a copper oscillating heat pipe
2015
Author(s) : Mahidzal Bin Dahari Source : Experimental Thermal and Fluid Science |
172. |
Modeling of thermal conductivity of ZnO-EG using experimental data and ANN methods
2015
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
173. |
Thermal conductivity of Cu/TiO2-water/EG hybrid nanofluid: Experimental data and modeling using artificial neural network and correlation
2015
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
174. |
A comprehensive review on energy efficient CO2 breakthrough technologies for sustainable green iron and steel manufacturing
2015
Author(s) : Raja Ariffin Bin Raja Ghazilla,Mahidzal Bin Dahari Source : Renewable Sustainable Energy Reviews |
175. |
Graphene nanoplatelets-silver hybrid nanofluids for enhanced heat transfer
2015
Author(s) : Mohd Nashrul Bin Mohd Zubir,Mahidzal Bin Dahari Source : Energy Conversion and Management |
176. |
A Comprehensive Review of Milk Fouling on Heated Surfaces
2015
Author(s) : Kazi Md. Salim Newaz,Mahidzal Bin Dahari Source : Critical Reviews in Food Science and Nutrition |
177. |
Modeling of thermal conductivity of ZnO-EG using experimental data and ANN methods
2015
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
178. |
Muscle activity, time to fatigue, and maximum task duration at different levels of production standard time
2015
Author(s) : Mahidzal Bin Dahari Source : Journal of Physical Therapy Science |
179. |
On numerical study of calcium sulphate fouling under sub-cooled flow boiling conditions
2015
Author(s) : Mahidzal Bin Dahari Source : Applied Thermal Engineering |
180. |
Performance dependence of thermosyphon on the functionalization approaches: An experimental study on thermo-physical properties of graphene nanoplatelet-based water nanofluids
2015
Author(s) : Chew Bee Teng,Mahidzal Bin Dahari Source : Energy Conversion and Management |
181. |
Theoretical modelling of momentum transfer function of bi-disperse porous media
2015
Author(s) : Mahidzal Bin Dahari Source : Applied Thermal Engineering |
182. |
The effects of energy expenditure rate on work productivity performance at different levels of production standard time
2015
Author(s) : Mahidzal Bin Dahari Source : Journal of Physical Therapy Science |
183. |
On numerical study of calcium sulphate fouling under sub-cooled flow boiling conditions
2015
Author(s) : Mahidzal Bin Dahari Source : Applied Thermal Engineering |
184. |
Development of a control system for artificially rehabilitated limbs: a review
2015
Author(s) : Imtiaz Ahmed Choudhury,Mahidzal Bin Dahari Source : Biological Cybernetics |
185. |
Investigation of heat transfer and pressure drop of a counter flow corrugated plate heat exchanger using MWCNT based nanofluids
2015
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
186. |
Muscle activity, time to fatigue, and maximum task duration at different levels of production standard time
2015
Author(s) : Mahidzal Bin Dahari Source : Journal of Physical Therapy Science |
187. |
Thermal dispersion effects on forced convection in a parallel plate porous channel
2015
Author(s) : Mahidzal Bin Dahari Source : Meccanica |
188. |
Performance dependence of thermosyphon on the functionalization approaches: An experimental study on thermo-physical properties of graphene nanoplatelet-based water nanofluids
2015
Author(s) : Kazi Md. Salim Newaz,Mahidzal Bin Dahari Source : Energy Conversion and Management |
189. |
A hybrid finite-element/finite-difference scheme for solving the 3-D energy equation in transient nonisothermal fluid flow over a staggered tube bank
2015
Author(s) : Mahidzal Bin Dahari Source : Numerical Heat Transfer, Part B: Fundamentals |
190. |
A Comprehensive Review of Milk Fouling on Heated Surfaces
2015
Author(s) : Mahidzal Bin Dahari Source : Critical Reviews in Food Science and Nutrition |
191. |
Investigation of heat transfer and pressure drop of a counter flow corrugated plate heat exchanger using MWCNT based nanofluids
2015
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
192. |
A Hybrid Finite-Element/Finite-Difference Scheme for Solving the 3-D Energy Equation in Transient Nonisothermal Fluid Flow over a Staggered Tube Bank
2015
Author(s) : Mahidzal Bin Dahari Source : Numerical Heat Transfer Part B-Fundamentals |
193. |
Theoretical modelling of momentum transfer function of bi-disperse porous media
2015
Author(s) : Mahidzal Bin Dahari Source : Applied Thermal Engineering |
194. |
Modeling of thermal conductivity of ZnO-EG using experimental data and ANN methods
2015
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
195. |
Thermal conductivity of Cu/TiO2-water/EG hybrid nanofluid: Experimental data and modeling using artificial neural network and correlation
2015
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
196. |
Effect of magnetic field on the heat transfer rate of kerosene/Fe2O3 nanofluid in a copper oscillating heat pipe
2015
Author(s) : Mahidzal Bin Dahari Source : Experimental Thermal and Fluid Science |
197. |
Buoyancy induced heat transfer deterioration in vertical concentric and eccentric annuli
2015
Author(s) : Mahidzal Bin Dahari Source : International Journal of Heat and Mass Transfer |
198. |
A comprehensive review on energy efficient CO2 breakthrough technologies for sustainable green iron and steel manufacturing
2015
Author(s) : Mahidzal Bin Dahari Source : Renewable Sustainable Energy Reviews |
199. |
Muscle activity, time to fatigue, and maximum task duration at different levels of production standard time
2015
Author(s) : Junedah Binti Sanusi,Mahidzal Bin Dahari Source : Journal of Physical Therapy Science |
200. |
Development of a control system for artificially rehabilitated limbs: a review
2015
Author(s) : Imtiaz Ahmed Choudhury,Mahidzal Bin Dahari Source : Biological Cybernetics |
201. |
Eulerian-Lagrangian analysis of solid particle distribution in an internally heated and cooled air-filled cavity
2015
Author(s) : Mahidzal Bin Dahari Source : Applied Mathematics and Computation |
202. |
The effects of energy expenditure rate on work productivity performance at different levels of production standard time
2015
Author(s) : Mahidzal Bin Dahari Source : Journal of Physical Therapy Science |
203. |
Experimental investigation and development of new correlations for thermal conductivity of CuO/EG-water nanofluid
2015
Author(s) : Mahidzal Bin Dahari Source : INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
204. |
The effects of energy expenditure rate on work productivity performance at different levels of production standard time
2015
Author(s) : Junedah Binti Sanusi,Mahidzal Bin Dahari Source : Journal of Physical Therapy Science |
205. |
Experimental study on thermal conductivity of ethylene glycol based nanofluids containing Al2O3 nanoparticles
2015
Author(s) : Mahidzal Bin Dahari Source : International Journal of Heat and Mass Transfer |
206. |
Development of a control system for artificially rehabilitated limbs: a review
2015
Author(s) : Mahidzal Bin Dahari Source : Biological Cybernetics |
207. |
Forced convective heat transfer of water/functionalized multi-walled carbon nanotube nanofluids in a microchannel with oscillating heat flux and slip boundary condition
2015
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
208. |
A comprehensive review on energy efficient CO2 breakthrough technologies for sustainable green iron and steel manufacturing
2015
Author(s) : Raja Ariffin Bin Raja Ghazilla,Mahidzal Bin Dahari Source : Renewable and Sustainable Energy Reviews |
209. |
Buoyancy induced heat transfer deterioration in vertical concentric and eccentric annuli
2015
Author(s) : Mahidzal Bin Dahari Source : International Journal of Heat and Mass Transfer |
210. |
CFD Convective flow simulation of the varying properties of CO2-H2O mixtures in geothermal systems
2015
Author(s) : Mahidzal Bin Dahari Source : Scientific World Journal |
211. |
Effect of magnetic field on the heat transfer rate of kerosene/Fe
Author(s) : Mahidzal Bin Dahari Source : Experimental Thermal and Fluid Science |
212. |
Eulerian-Lagrangian analysis of solid particle distribution in an internally heated and cooled air-filled cavity
2015
Author(s) : Mahidzal Bin Dahari Source : Applied Mathematics and Computation |
213. |
Experimental investigation and development of new correlations for thermal conductivity of CuO/EG-water nanofluid
2015
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
214. |
Thermal dispersion effects on forced convection in a parallel plate porous channel
2015
Author(s) : Mahidzal Bin Dahari Source : Meccanica |
215. |
Thermal conductivity of Cu/TiO2-water/EG hybrid nanofluid: Experimental data and modeling using artificial neural network and correlation
2015
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
216. |
Forced convective heat transfer of water/functionalized multi-walled carbon nanotube nanofluids in a microchannel with oscillating heat flux and slip boundary condition
2015
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
217. |
Investigation of heat transfer and pressure drop of a counter flow corrugated plate heat exchanger using MWCNT based nanofluids
2015
Author(s) : Mahidzal Bin Dahari Source : International Communications in Heat and Mass Transfer |
218. |
Experimental study on thermal conductivity of ethylene glycol based nanofluids containing Al2O3 nanoparticles
2015
Author(s) : Mahidzal Bin Dahari Source : International Journal of Heat and Mass Transfer |
219. |
Performance investigation of micro- and nano-sized particle erosion in a 90 degrees elbow using an ANFIS model
2015
Author(s) : Mahidzal Bin Dahari Source : Powder Technology |
220. |
Thermal dispersion effects on forced convection in a parallel plate porous channel
2015
Author(s) : Mahidzal Bin Dahari Source : Meccanica |
221. |
Experimental study on thermal conductivity of ethylene glycol based nanofluids containing Al2O3 nanoparticles
2015
Author(s) : Mahidzal Bin Dahari Source : International Journal of Heat and Mass Transfer |
222. |
A Hybrid Finite-Element/Finite-Difference Scheme for Solving the 3-D Energy Equation in Transient Nonisothermal Fluid Flow over a Staggered Tube Bank
2015
Author(s) : Mahidzal Bin Dahari,Houman Yarmand Source : Numerical Heat Transfer Part B-Fundamentals |
223. |
Dynamic performance assessment of the efficiency of fuel cell-powered bicycle: An experimental approach
2014
Author(s) : Mahidzal Bin Dahari Source : International Journal of Hydrogen Energy |
224. |
Comparison of the finite volume and lattice boltzmann methods for solving natural convection heat transfer problems inside cavities and enclosures
2014
Author(s) : Mahidzal Bin Dahari Source : Abstract and Applied Analysis |
225. |
Investigation of nanofluid mixed convection in a shallow cavity using a two-phase mixture model
2014
Author(s) : Mahidzal Bin Dahari Source : International Journal of Thermal Sciences |
226. |
On the electrical and thermal contact resistance of metal foam
2014
Author(s) : Mahidzal Bin Dahari Source : International Journal of Heat and Mass Transfer |
227. |
Monitoring the tool wear, surface roughness and chip formation occurrences using multiple sensors in turning
2014
Author(s) : Mahidzal Bin Dahari Source : Journal of Manufacturing Systems |
228. |
An experimental study on thermal conductivity and viscosity of nanofluids containing carbon nanotubes
2014
Author(s) : Mahidzal Bin Dahari Source : Nanoscale Research Letters |
229. |
A theoretical model to predict gas permeability for slip flow through a porous medium
2014
Author(s) : Mahidzal Bin Dahari Source : Applied Thermal Engineering |
230. |
Numerical Study of Entropy Generation due to Coupled Laminar and Turbulent Mixed Convection and Thermal Radiation in an Enclosure Filled with a Semitransparent Medium
2014
Author(s) : Mahidzal Bin Dahari Source : Scientific World Journal |
231. |
An experimental study on thermal conductivity and viscosity of nanofluids containing carbon nanotubes
2014
Author(s) : Mohd Nashrul Bin Mohd Zubir,Mahidzal Bin Dahari Source : Nanoscale Research Letters |
232. |
Monitoring the tool wear, surface roughness and chip formation occurrences using multiple sensors in turning
2014
Author(s) : Imtiaz Ahmed Choudhury,Mahidzal Bin Dahari Source : Journal of Manufacturing Systems |
233. |
A theoretical model to predict gas permeability for slip flow through a porous medium
2014
Author(s) : Mahidzal Bin Dahari Source : Applied Thermal Engineering |
234. |
Investigation of nanofluid mixed convection in a shallow cavity using a two-phase mixture model
2014
Author(s) : Mahidzal Bin Dahari Source : International Journal of Thermal Sciences |
235. |
Numerical study of entropy generation due to coupled laminar and turbulent mixed convection and thermal radiation in an enclosure filled with a semitransparent medium
2014
Author(s) : Mahidzal Bin Dahari Source : The Scientific World Journal |
236. |
On the electrical and thermal contact resistance of metal foam
2014
Author(s) : Mahidzal Bin Dahari Source : International Journal of Heat and Mass Transfer |
237. |
Comparison of the Finite Volume and Lattice Boltzmann Methods for Solving Natural Convection Heat Transfer Problems inside Cavities and Enclosures
2014
Author(s) : Mahidzal Bin Dahari Source : Abstract and Applied Analysis |
238. |
A conceptual model of work productivity associated with work-related musculoskeletal disorders in the industrial repetitive task
2014
Author(s) : Mahidzal Bin Dahari Source : Advanced Materials Research |
239. |
Development of hazard assessment for hydrogen refueling station in Malaysia
2013
Author(s) : Mahidzal Bin Dahari Source : Applied Mechanics and Materials DOI : 10.4028/www.scientific.net/AMM.315.121 |
240. |
Numerical study of entropy generation in a flowing nanofluid used in micro- and minichannels
2013
Author(s) : Mahidzal Bin Dahari Source : Entropy |
241. |
Fuzzy-based risk prioritization for a hydrogen refueling facility in Malaysia
2013
Author(s) : Mahidzal Bin Dahari Source : Journal of Zhejiang University: Science A |
242. |
Development of a system configuration for a solar powered hydrogen facility using fuzzy logic control
2013
Author(s) : Mahidzal Bin Dahari Source : Journal of Zhejiang University: Science A |
243. |
Development of a system configuration for a solar powered hydrogen facility using fuzzy logic control
2013
Author(s) : Mahidzal Bin Dahari Source : Journal of Zhejiang University-Science A |
244. |
Fuzzy-based risk prioritization for a hydrogen refueling facility in Malaysia
2013
Author(s) : Mahidzal Bin Dahari Source : Journal of Zhejiang University-Science A |
245. |
Numerical Study of Entropy Generation in a Flowing Nanofluid Used in Micro- and Minichannels
2013
Author(s) : Mahidzal Bin Dahari Source : Entropy |
246. |
Modeling and simulation of solar powered hydrogen system
2013
Author(s) : Mahidzal Bin Dahari Source : Applied Mechanics and Materials |
247. |
A Review of Auto-Guided-Vehicles routing algorithms
2012
Author(s) : Mahidzal Bin Dahari Source : Advanced Materials Research |
248. |
Forward and inverse kinematics model for robotic welding process using KR-16KS KUKA robot
2011
Author(s) : Mahidzal Bin Dahari Source : 2011 Fourth International Conference on Modeling, Simulation and Applied Optimization |
249. |
Small-scale helicopter system identification model using recurrent neural networks
2010
Author(s) : Mahidzal Bin Dahari Source : IEEE |
250. |
Use of Suitable Equation of State for The Conversion of Volumetric to Mass Flowrate in NGV Refueling Measurement
2009
Author(s) : Mahidzal Bin Dahari Source : Journal-The Institution of Engineers |
BOOK
NO | DETAILS OF BOOK |
---|---|
1. |
Modern Control Engineering
2019
Author(s) : Mahidzal Bin Dahari |
CHAPTER IN BOOK
NO | DETAILS OF CHAPTER IN BOOK |
---|---|
1. |
A Controller for Natural Gas Fuel Dispenser with Multi-Level-Pressure Banks
2020
Author(s) : Mahidzal Bin Dahari |
2. |
Performance Evaluation of Nanofluids in an Inclined Ribbed Microchannel for Electronic Cooling Applications
2016
Author(s) : Mahidzal Bin Dahari |
PROCEEDING
NO | DETAILS OF PROCEEDING |
---|---|
1. |
Design and Development of Aircraft Cabin for Very
Light
Jet(VLJ)
2010
Author(s) : Mahidzal Bin Dahari |
2. |
Implementation of System Identification to the Modeling
of Meterless NGV Refueling Dispenser
2007
Author(s) : Mahidzal Bin Dahari |
3. |
Design and Implementation of a Minimum Switching Time
Transitions for NGV Refueling
2006
Author(s) : Mahidzal Bin Dahari |
4. |
Calculation of Mass of Gas Using Equation of State
for NGV Refueling Equipment
2005
Author(s) : Mahidzal Bin Dahari |
RESEARCH PROJECT
GRANT | PROGRESS | STATUS |
---|---|---|
Hydrogen Storage System
(KW PNC(JIM)) |
|
end |
Study on the Absorption and Desorption of Ti-based AB2-type Alloys based Material for Hydrogen Storage and Fuel System
(RU Geran - Fakulti Program) |
|
end |
Study On The Effect Of Higher Operating Temperature For Alkaline Electrolysis On Electricity Consumption
Researcher(s) : Associate Prof. Dr. Badrul Hisham Bin Mohamad Jan,Ir. Dr. Norrima Binti Mokhtar,Associate Prof. Dr. Anis Salwa Binti Mohd Khairuddin
(RU Geran - Fakulti Program) |
|
end |
Heat Transfer And Drag Loss Analysis In A Packed Bed Reactor
(Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC))) |
|
end |
Hydrogen Refueling Station And Dispenser Control System.
(High Impact Research - Ministry of Education (HIR-MOE) Cycle 1) |
|
end |
Optimizing Vehicle Routing Problem By Metaheuristics Algorithm
(Geran Penyelidikan Universiti Malaya (UMRG) - AET (Innovative Technology (ITRC))) |
|
end |
RESEARCH COLLABORATOR
GRANT | PROGRESS | STATUS |
---|---|---|
Study On The Effect Of Higher Operating Temperature For Alkaline Electrolyser On System Efficiency, Over Potential And Power Ratio
(RU Geran - Fakulti Program) |
|
end |
Investigation Of Pulse Oximetry Optimization For Clinical Usage And Flexibility
Researcher(s) : Prof. Dr. Sulaiman Wadi Harun,Associate Prof. Ir. Dr. Mahidzal Bin Dahari,Prof. Dr. Noor Azmi Bin Mat Adenan
(RU Geran - Fakulti Program) |
|
end |
Using Radio Antenna Technique In Solar Activity Study And Electromagnetic Pre-seismic Signals Detection On A Global Scale
(RU Geran - Fakulti Program) |
|
end |
First Light Observation Using The Upsi-um Radio Telescope
Researcher(s) : Dr. Noraisyah Binti Mohamed Shah,Prof. Dr. Zainol Abidin Bin Ibrahim,Dr. Norsiah Binti Hashim,Dr. Ungku Ferwani Salwa Binti Ungku Ibrahim,Wan Zul Adli Wan Mokhtar,Associate Prof. Ir. Dr. Mahidzal Bin Dahari
(UM Grant - Frontier Research Grant) |
|
end |
Artificial Intelligent Based Modeling And Control Strategies For Optimal Hydrogen Production From Biomedical Waste In A Microbial Electrolysis Cells (mec) Reactor
Researcher(s) : Professor Ir. Dr. Mohd Azlan Bin Hussain,Associate Prof. Ir. Dr. Mahidzal Bin Dahari
(Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC))) |
|
end |
Optimizing Vehicle Routing Problem By Metaheuristics Algorithm
(Geran Penyelidikan Universiti Malaya (UMRG) - AET (Innovative Technology (ITRC))) |
|
end |