ARTICLE IN ACADEMIC JOURNALS
NO | DETAILS OF ARTICLE IN ACADEMIC JOURNALS |
---|---|
1. |
Physical fitness and motor ability parameters as predictors for skateboarding performance: A logistic regression modelling analysis
2024
Author(s) : Noor Azuan Bin Abu Osman Source : PLoS One DOI : https://doi.org/10.1371/journal.pone.0296467 |
2. |
Synthesis, fabrication and characterization of CaMgFexTiyO12-based electro-ceramics sensor
2024
Author(s) : Noor Azuan Bin Abu Osman Source : JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS DOI : https://doi.org/10.1007/s10854-024-12100-x |
3. |
Investigation of EMG Parameters for Transtibial Amputees While Treadmill Walking with Different Speeds: A Preliminary Study
2024
Author(s) : Noor Azuan Bin Abu Osman Source : IEEE Access DOI : 10.1109/ACCESS.2024.3360301 |
4. |
A systematic review of methods used to assist transtibial prosthetic alignment decision-making
2023
Author(s) : Noor Azuan Bin Abu Osman Source : PROSTHETICS AND ORTHOTICS INTERNATIONAL DOI : 10.1097/PXR.0000000000000309 |
5. |
Surface profile analysis of laminated transfemoral prosthetic socket fabricated with different ratios of epoxy resin and acrylic resin
2023
Author(s) : Noor Azuan Bin Abu Osman Source : NATURE DOI : 10.1038/s41598-022-21990-y |
6. |
Nanosizing Approach—A Case Study on the Thermal Decomposition of Hydrazine Borane
2023
Author(s) : Noor Azuan Bin Abu Osman Source : JOURNAL OF MATERIALS SCIENCE DOI : https://doi.org/10.3390/ma16020867 |
7. |
Relationship between postural stability and fall risk in young adult after lower limb muscle fatigue
2023
Author(s) : Noor Azuan Bin Abu Osman Source : Healthcare DOI : 10.4081/hls.2023.11182 |
8. |
Effect of Infill Parameters on the Compressive Strength of 3D-Printed Nylon-Based Material
2023
Author(s) : Noor Azuan Bin Abu Osman Source : Polymers DOI : 10.3390/polym15020255 |
9. |
Relationship of anthropometric measurement and handgrip strength in Malaysian recreational tenpin bowlers
2023
Author(s) : Noor Azuan Bin Abu Osman Source : Pedagogy of Physical Culture and Sports DOI : 10.15561/26649837.2023.0205 |
10. |
Dynamic model of upper extremity and its application: a systematic review
2023
Author(s) : Noor Azuan Bin Abu Osman Source : RUSSIAN JOURNAL OF BIOMECHANICS DOI : https://doi.org/10.15593/RZhBiomeh/2023.1.08 |
11. |
Estimation of body segmental orientation for prosthetic gait using a nonlinear autoregressive neural network with exogenous inputs
2023
Author(s) : Noor Azuan Bin Abu Osman Source : Physical and Engineering Sciences in Medicine DOI : 10.1007/s13246-023-01332-6 |
12. |
Do Science and Social Science Differ? Multi-Group Analysis (MGA) of the Willingness to Continue Online Learning
2023
Author(s) : Noor Azuan Bin Abu Osman Source : QUALITY & QUANTITY DOI : 10.1007/s11135-022-01465-y |
13. |
Robotic Knee Prosthesis with Cycloidal Gear and Four-Bar Mechanism Optimized Using Particle Swarm Algorithm
2022
Author(s) : Noor Azuan Bin Abu Osman Source : Actuators DOI : 10.3390/act11090253 |
14. |
A FSR Sensor Cuff to Measure Muscle Activation During Strength and Gait Cycle for Lower Limb
2022
Author(s) : Noor Azuan Bin Abu Osman Source : IEEE Access DOI : 10.1109/ACCESS.2022.3207497 |
15. |
Stiffness estimation of planar spiral spring based on Gaussian process regression
2022
Author(s) : Noor Azuan Bin Abu Osman Source : Scientific Reports DOI : 10.1038/s41598-022-15421-1 |
16. |
On the use of Virtual Reality for Individuals with Upper Limb Loss: A Systematic Scoping Review
2022
Source : European Journal of Physical and Rehabilitation Medicine DOI : 10.23736/S1973-9087.22.06794-6 |
17. |
Test-retest reliability of customised inertial measurement units (IMUs) in evaluating skateboarding related manoeuvres
2022
Author(s) : Noor Azuan Bin Abu Osman Source : Proceedings of the Institution of Mechanical Engineers Part P-Journal of Sports Engineering and Technology DOI : 10.1177/17543371221110424 |
18. |
The sequential mediation model of students’ willingness to continue online learning during the COVID‑19 pandemic
2022
Author(s) : Noor Azuan Bin Abu Osman Source : Beliefs & Values (Springer Publishing Company, Inc.) DOI : https://doi.org/10.1186/s41039-022-00188-w |
19. |
A longitudinal analysis of injury characteristics among elite and amateur tennis players at different tournaments from electronic newspaper reports
2022
Author(s) : Noor Azuan Bin Abu Osman Source : Frontiers in Public Health DOI : 10.3389/fpubh.2022.835119 |
20. |
Optimization and Comparison of Typical Elastic Actuators in Powered Ankle-foot Prosthesis
2022
Author(s) : Noor Azuan Bin Abu Osman Source : SPRINGER OPTIMIZATION AND ITS APPLICATIONS DOI : 10.1007/s12555-020-0980-x |
21. |
Generating an Adaptive and Robust Walking Pattern for a Prosthetic Ankle-Foot by Utilizing a Nonlinear Autoregressive Network With Exogenous Inputs
2021
Author(s) : Noor Azuan Bin Abu Osman Source : IEEE Transactions on Neural Networks and Learning Systems DOI : 10.1109/TNNLS.2021.3076060 |
22. |
Classification and Comparison of Mechanical Design of Powered Ankle-Foot Prostheses for Transtibial Amputees Developed in the 21st Century: A Systematic Review
2021
Author(s) : Noor Azuan Bin Abu Osman Source : JOURNAL OF MEDICAL DEVICES-TRANSACTIONS OF THE ASME DOI : 10.1115/1.4049437 |
23. |
Comparison of Conventional and Virtual Reality Box and Blocks Tests in Upper Limb Amputees: A Case-Control Study
2021
Source : IEEE Access DOI : 10.1109/ACCESS.2021.3072988 |
24. |
Investigation of EMG parameter for transtibial prosthetic user with flexion and extension of the knee and normal walking gait: A preliminary study
2021
Author(s) : Noor Azuan Bin Abu Osman Source : JOURNAL OF ENGINEERING IN MEDICINE DOI : 10.1177/0954411920985753 |
25. |
Identification of high-performance volleyball players from anthropometric variables and psychological readiness: A machine-learning approach
2021
Author(s) : Noor Azuan Bin Abu Osman Source : SAGE Open Medicine DOI : 10.1177/17543371211045451 |
26. |
Biomechanical Analysis of an Improvement of Prosthetic Liner using Polyurethane Focusing at the Anterior-Distal Part of Residual Limb: A Case Study
2021
Author(s) : Noor Azuan Bin Abu Osman Source : Sains Malaysiana DOI : 10.17576/jsm-2021-5009-18 |
27. |
Armalcolite nanocomposite: A new paradigm for flexible capacitive humidity sensor
2021
Author(s) : Noor Azuan Bin Abu Osman Source : IEEE SENSORS JOURNAL DOI : 10.1109/JSEN.2021.3072162 |
28. |
Biomechanical Ambulatory Assessment of 3D Knee Angle Using Novel Inertial Sensor-Based Technique
2021
Author(s) : Noor Azuan Bin Abu Osman Source : IEEE ACCESS DOI : 10.1109/ACCESS.2021.3062978 |
29. |
Video Game-Based Rehabilitation Approach for Individuals Who Have Undergone Upper Limb Amputation: Case-Control Study
2021
Author(s) : Noor Azuan Bin Abu Osman,Nur Afiqah Binti Hashim Source : JMIR SERIOUS GAMES DOI : 10.2196/17017 |
30. |
Effect of Lower Limb Muscle Fatigue on Fall Risk for Transfemoral Amputee: A Pilot Study
2021
Author(s) : Noor Azuan Bin Abu Osman Source : Wiley Interdisciplinary Reviews: Computational Statistics DOI : 10.1155/2021/4357473 |
31. |
The classification of skateboarding tricks via transfer learning pipelines
2021
Author(s) : Noor Azuan Bin Abu Osman Source : PEERJ COMPUTER SCIENCE DOI : 10.7717/peerj-cs.680 |
32. |
Contribution of the arm segment rotations towards the horizontal ball and racket head velocities during forehand long shot and drop shot services in table tennis.
2020
Author(s) : Noor Azuan Bin Abu Osman Source : Sports Biomechanics DOI : https://doi.org/10.1080/14763141.2020.1726995 |
33. |
Oxygen-Releasing Scaffolds for Accelerated Bone Regeneration
2020
Author(s) : Noor Azuan Bin Abu Osman Source : ACS BIOMATERIALS SCIENCE & ENGINEERING DOI : 10.1021/acsbiomaterials.9b01789 |
34. |
Towards Universal Control System for Powered Ankle-Foot Prosthesis: A Simulation Study
2020
Author(s) : Noor Azuan Bin Abu Osman Source : INTERNATIONAL JOURNAL OF FUZZY SYSTEMS DOI : 10.1007/s40815-020-00855-4 |
35. |
Adsorption of Dyes Using Poly(vinyl alcohol) (PVA) and PVA-Based Polymer Composite Adsorbents: A Review
2020
Author(s) : Noor Azuan Bin Abu Osman Source : JOURNAL OF POLYMERS AND THE ENVIRONMENT DOI : 10.1007/s10924-020-01656-4 |
36. |
A case study on interface pressure pattern of two garment orthoses on a child with cerebral palsy
2020
Author(s) : Noor Azuan Bin Abu Osman Source : PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE DOI : 10.1177/0954411920923541 |
37. |
Orthoses versus gait retraining: Immediate response in improving physical performance measures in healthy and medial knee osteoarthritic adults
2020
Author(s) : Noor Azuan Bin Abu Osman Source : PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE DOI : 10.1177/0954411920924525 |
38. |
Adsorbents for removal of cationic dye: nanocellulose reinforced biopolymer composites.
2020
Author(s) : Che Rosmani Binti Che Hassan,Noor Azuan Bin Abu Osman Source : JOURNAL OF POLYMER RESEARCH DOI : https://doi.org/10.1007/s10965-020-02347-3 |
39. |
Preparation and characterization study on maleic acid cross-linked poly(vinyl alcohol)/chitin/nanocellulose composites
2020
Author(s) : Noor Azuan Bin Abu Osman Source : JOURNAL OF APPLIED POLYMER SCIENCE DOI : 10.1002/app.49044 |
40. |
Postural stability strategies in transtibial amputees during quiet standing in altered sensory conditions wearing three types of prosthetic feet
2020
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of Mechanics in Medicine and Biology DOI : doi.org/10.1142/S0219519419500714 |
41. |
Comparative study of the circumferential and volumetric analysis between conventional casting and three-dimensional scanning methods for transtibial socket: A preliminary study
2019
Author(s) : Noor Azuan Bin Abu Osman Source : PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE DOI : 10.1177/0954411918816124 |
42. |
Parametric process optimization to improve the accuracy and mechanical properties of 3D printed parts
2019
Author(s) : Noor Azuan Bin Abu Osman Source : MRS ADVANCES DOI : 10.1557/adv.2018.647 |
43. |
Optimisation and biological activities of bioceramic robocast scaffolds provided with an oxygen-releasing coating for bone tissue engineering applications
2019
Author(s) : Noor Azuan Bin Abu Osman Source : CERAMICS INTERNATIONAL DOI : 10.1016/j.ceramint.2018.09.247 |
44. |
Gait Classification Using Mahalanobis-Taguchi System for Health Monitoring Systems Following Anterior Cruciate Ligament Reconstruction
2019
Author(s) : Noor Azuan Bin Abu Osman Source : Applied Sciences-Basel DOI : 10.3390/app9163306 |
45. |
Combined effects of knee brace, laterally wedged insoles, and toe-out gait on knee adduction moment and fall risk in moderate medial knee osteoarthritis patients
2019
Author(s) : Noor Azuan Bin Abu Osman Source : PROSTHETICS AND ORTHOTICS INTERNATIONAL DOI : 10.1177/0309364618796849 |
46. |
Gait Analysis and Mathematical Index-Based Health Management Following Anterior Cruciate Ligament Reconstruction
2019
Author(s) : Noor Azuan Bin Abu Osman Source : APPLIED SCIENCES-BASEL DOI : 10.3390/app9214680 |
47. |
Analysis of the interface pressure exerted by the Cheneau brace in patients with double-curve adolescent idiopathic scoliosis
2019
Author(s) : Noor Azuan Bin Abu Osman Source : PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H:JOURNAL OF ENGINEERING IN MEDICINE DOI : 10.1177/0954411919856144 |
48. |
Mechanical behavior of calcium sulfate scaffold prototypes built by solid free-form fabrication
2018
Author(s) : Noor Azuan Bin Abu Osman Source : RAPID PROTOTYPING JOURNAL DOI : 10.1108/RPJ-06-2015-0077 |
49. |
Combined effects of knee brace, laterally wedged insoles and toe-in gait on knee adduction moment and balance in moderate medial knee osteoarthritis patients
2018
Author(s) : Noor Azuan Bin Abu Osman Source : GAIT POSTURE DOI : 10.1016/j.gaitpost.2018.01.024 |
50. |
3D-printed biphasic calcium phosphate scaffolds coated with an oxygen generating system for enhancing engineered tissue survival
2018
Author(s) : Noor Azuan Bin Abu Osman Source : MATERIALS SCIENCE ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS DOI : 10.1016/j.msec.2017.11.037 |
51. |
Moisture sensitive inimitable Armalcolite/PDMS flexible sensor: A new entry
2018
Author(s) : Noor Azuan Bin Abu Osman Source : SENSORS AND ACTUATORS B-CHEMICAL DOI : 10.1016/j.snb.2018.01.207 |
52. |
Awareness, potential factors, and post-amputation care of stump flexion contractures among transtibial amputees
2018
Author(s) : Noor Azuan Bin Abu Osman Source : TURKISH JOURNAL OF PHYSICAL MEDICINE AND REHABILITATION DOI : 10.5606/tftrd.2018.1668 |
53. |
Interface Pressure of Lycra Orthosis at Different Postures in Children with Cerebral Palsy (CP)
2018
Author(s) : Noor Azuan Bin Abu Osman Source : SAINS MALAYSIANA DOI : 10.17576/jsm-2018-4704-15 |
54. |
Improvement on upper limb body-powered prostheses (1921-2016): A systematic review
2018
Author(s) : Noor Azuan Bin Abu Osman Source : PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE DOI : 10.1177/0954411917744585 |
55. |
Effects of different foot progression angles and platform settings on postural stability and fall risk in healthy and medial knee osteoarthritic adults
2018
Author(s) : Noor Azuan Bin Abu Osman Source : PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE DOI : 10.1177/0954411917750409 |
56. |
Breathable tissue engineering scaffolds: An efficient design-optimization by additive manufacturing
2018
Author(s) : Noor Azuan Bin Abu Osman Source : MATERIALS TODAY-PROCEEDINGS DOI : 10.1016/j.matpr.2018.05.079 |
57. |
Sensorless control system for assistive robotic ankle-foot
2018
Author(s) : Noor Azuan Bin Abu Osman Source : INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS DOI : 10.1177/1729881418775854 |
58. |
Effect of stump flexion contracture with and without prosthetic alignment intervention towards postural stability among transtibial prosthesis users
2017
Author(s) : Noor Azuan Bin Abu Osman Source : INTERNATIONAL TECHNICAL POSTGRADUATE CONFERENCE, 2017 DOI : 10.1088/1757-899X/210/1/012002 |
59. |
An anthropomorphic transhumeral prosthesis socket developed based on an oscillometric pump and controlled by force-sensitive resistor pressure signals
2017
Author(s) : Noor Azuan Bin Abu Osman Source : BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK DOI : 10.1515/bmt-2015-0106 |
60. |
Analysis of Interrelationships among Voluntary and Prosthetic Leg Joint Parameters Using Cyclograms
2017
Author(s) : Noor Azuan Bin Abu Osman Source : FRONTIERS IN NEUROSCIENCE DOI : 10.3389/fnins.2017.00230 |
61. |
Synthesis and characterization of beta-TCP/CNT nanocomposite: Morphology, microstructure and in vitro bioactivity
2017
Author(s) : Noor Azuan Bin Abu Osman Source : CERAMICS INTERNATIONAL DOI : 10.1016/j.ceramint.2017.03.049 |
62. |
Prosthesis donning and doffing questionnaire: Development and validation
2017
Author(s) : Noor Azuan Bin Abu Osman Source : PROSTHETICS AND ORTHOTICS INTERNATIONAL DOI : 10.1177/0309364617690397 |
63. |
Clinical evaluation of a prosthetic suspension system: Looped silicone liner
2017
Author(s) : Noor Azuan Bin Abu Osman Source : PROSTHETICS AND ORTHOTICS INTERNATIONAL DOI : 10.1177/0309364616670396 |
64. |
Optical fiber Bragg grating-instrumented silicone liner for interface pressure measurement within prosthetic sockets of lower-limb amputees
2017
Author(s) : Noor Azuan Bin Abu Osman Source : JOURNAL OF BIOMEDICAL OPTICS DOI : 10.1117/1.JBO.22.8.087001 |
65. |
Poly(vinyl alcohol)--chitin composites reinforced by oil palm empty fruit bunch fiber-derived nanocellulose
2017
Author(s) : Noor Azuan Bin Abu Osman Source : INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION DOI : 10.1080/1023666X.2017.1288345 |
66. |
Analysis of voluntary opening Ottobock Hook and Hosmer Hook for upper limb prosthetics: a preliminary study
2017
Author(s) : Noor Azuan Bin Abu Osman Source : BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK DOI : 10.1515/bmt-2016-0130 |
67. |
A Pilot Study on Physical Performance Measures: What is Better for Knee Osteoarthritis Patients, Orthosis or Gait Modifications?
2017
Author(s) : Noor Azuan Bin Abu Osman Source : 3RD INTERNATIONAL CONFERENCE ON MOVEMENT, HEALTH AND EXERCISE: ENGINEERING OLYMPIC SUCCESS: FROM THEORY TO PRACTICE DOI : 10.1007/978-981-10-3737-5_35 |
68. |
A new prosthetic alignment device to read and record prosthesis alignment data
2017
Author(s) : Noor Azuan Bin Abu Osman Source : PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE DOI : 10.1177/0954411917735082 |
69. |
A system for detection of cervical precancerous in field emission scanning electron microscope images using texture features
2017
Author(s) : Noor Azuan Bin Abu Osman Source : JOURNAL OF INNOVATIVE OPTICAL HEALTH SCIENCES DOI : 10.1142/S1793545816500450 |
70. |
Dielectric and AC conductivity studies of porous armalcolite nanocomposite-based novel humidity sensor.
2017
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of The American Ceramic Society DOI : 10.1111/jace.15033 |
71. |
Development and Validation of Fiber Bragg Grating Sensing Pad for Interface Pressure Measurements Within Prosthetic Sockets
2016
Author(s) : Noor Azuan Bin Abu Osman Source : Ieee Sensors Journal |
72. |
Conversion of calcite from cockle shells to bioactive nanorod hydroxyapatite for biomedical applications
2016
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of Ceramic Processing Research |
73. |
Design and development of an in situ synthesized layered double hydroxide structure of Fe-induced hydroxyapatite for drug carriers
2016
Author(s) : Noor Azuan Bin Abu Osman Source : Rsc Advances DOI : 10.1039/C6RA03093A |
74. |
Polyurethane/58S bioglass nanofibers: synthesis, characterization, and in vitro evaluation
2016
Author(s) : Noor Azuan Bin Abu Osman Source : Rsc Advances |
75. |
Development of biocompatible hydroxyapatitepoly-(ethylene glycol) core-shell nanoparticles as an improved drug carrier: structural and electrical characterizations
2016
Author(s) : Noor Azuan Bin Abu Osman Source : RSC ADVANCES DOI : 10.1039/C6RA21210G |
76. |
Computer-aided screening system for cervical precancerous cells based on field emission scanning electron microscopy and energy dispersive x-ray images and spectra
2016
Author(s) : Noor Azuan Bin Abu Osman Source : OPTICAL ENGINEERING DOI : 10.1117/1.OE.55.10.103110 |
77. |
In vitro behavior of silk fibroin-coated calcium magnesium silicate scaffolds
2016
Author(s) : Noor Azuan Bin Abu Osman Source : journal of advanced materials and processing |
78. |
Structure, Properties, and In Vitro Behavior of Heat- Treated Calcium Sulfate Scaffolds Fabricated by 3D Printing
2016
Author(s) : Noor Azuan Bin Abu Osman Source : Plos One DOI : 10.1371/journal.pone.0151216 |
79. |
A comparison of pressure distributions between two types of sockets in a bulbous stump
2016
Author(s) : Noor Azuan Bin Abu Osman Source : Prosthetics and Orthotics International DOI : 10.1177/0309364614564022 |
80. |
Effect of technical parameters on porous structure and strength of 3D printed calcium sulfate prototypes
2016
Author(s) : Noor Azuan Bin Abu Osman Source : Robotics and Computer-Integrated Manufacturing |
81. |
Design and Development for Capacitive Humidity Sensor Applications of Lead-Free Ca,Mg,Fe,Ti-Oxides-Based Electro-Ceramics with Improved Sensing Properties via Physisorption
2016
Author(s) : Noor Azuan Bin Abu Osman Source : Sensors DOI : 10.3390/s16071135 |
82. |
Optimal design of a 3D-printed scaffold using intelligent evolutionary algorithms
2016
Author(s) : Noor Azuan Bin Abu Osman Source : Applied Soft Computing DOI : 10.1016/j.asoc.2015.11.011 |
83. |
Analysis of Jumping-Landing Manoeuvers after Different Speed Performances in Soccer Players
2016
Author(s) : Noor Azuan Bin Abu Osman Source : PLoS One DOI : 10.1371/journal.pone.0152630 |
84. |
Uniformly Porous Nanocrystalline CaMgFe1.33Ti3O12 Ceramic Derived Electro-Ceramic Nanocomposite for Impedance Type Humidity Sensor
2016
Author(s) : Noor Azuan Bin Abu Osman Source : SENSORS DOI : 10.3390/s16122029 |
85. |
The limits of stability and muscle activity in middle-aged adults during static and dynamic stance
2016
Author(s) : Noor Azuan Bin Abu Osman Source : JOURNAL OF BIOMECHANICS DOI : 10.1016/j.jbiomech.2016.11.006 |
86. |
Techniques for Interface Stress Measurements within Prosthetic Sockets of Transtibial Amputees: A Review of the Past 50 Years of Research
2016
Author(s) : Noor Azuan Bin Abu Osman Source : Sensors DOI : 10.3390/s16071119 |
87. |
Automated cervical precancerous cells screening system based on Fourier transform infrared spectroscopy features
2016
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of Biomedical Optics DOI : 10.1117/1.JBO.21.7.075005 |
88. |
Development and Validation of Fiber Bragg Grating Sensing Pad for Interface Pressure Measurements Within Prosthetic Sockets
2016
Author(s) : Noor Azuan Bin Abu Osman Source : Ieee Sensors Journal DOI : 10.1109/JSEN.2015.2495323 |
89. |
Polyurethane/58S bioglass nanofibers: synthesis, characterization, and in vitro evaluation
2016
Author(s) : Noor Azuan Bin Abu Osman Source : Rsc Advances DOI : 10.1039/C5RA24786A |
90. |
Synthesis and Characterizations of Novel Ca-Mg-Ti-Fe-Oxides Based Ceramic Nanocrystals and Flexible Film of Polydimethylsiloxane Composite with Improved Mechanical and Dielectric Properties for Sensors
2016
Author(s) : Mas Ayu Binti Said Source : Sensors DOI : 10.3390/s16030292 |
91. |
Effect of technical parameters on porous structure and strength of 3D printed calcium sulfate prototypes
2016
Author(s) : Noor Azuan Bin Abu Osman Source : Robotics and Computer-Integrated Manufacturing DOI : 10.1016/j.rcim.2015.06.005 |
92. |
Structure, Properties, and In Vitro Behavior of Heat-Treated Calcium Sulfate Scaffolds Fabricated by 3D Printing
2016
Author(s) : Noor Azuan Bin Abu Osman Source : Plos One |
93. |
Ion size, loading, and charge determine the mechanical properties, surface apatite, and cell growth of silver and tantalum doped calcium silicate
2016
Author(s) : Noor Azuan Bin Abu Osman Source : Rsc Advances DOI : 10.1039/C5RA17326D |
94. |
Detection of Prosthetic Knee Movement Phases via in- Socket Sensors: A Feasibility Study
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Scientific World Journal DOI : 10.1155/2015/923286 |
95. |
The effect of Dermo and Seal-In X5 prosthetic liners on pressure distributions and reported satisfaction during ramp ambulation in persons with transtibial limb loss.
2015
Author(s) : Wan Abu Bakar Bin Wan Abas,Noor Azuan Bin Abu Osman Source : European Journal of Physical and Rehabilitation Medicine |
96. |
Polycaprolactone/starch composite: Fabrication, structure, properties, and applications
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of Biomedical Materials Research Part A DOI : 10.1002/jbm.a.35371 |
97. |
Effect of spatial inlet velocity profiles on the vortex formation pattern in a dilated left ventricle
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Computer Methods in Biomechanics and Biomedical Engineering DOI : 10.1080/10255842.2013.779683 |
98. |
Fabrication and characterization of DLC coated microdimples on hip prosthesis heads
2015
Author(s) : Noor Azuan Bin Abu Osman Source : JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS |
99. |
Interface Stress in Socket/Residual Limb with Transtibial Prosthetic Suspension Systems During Locomotion on Slopes and Stairs
2015
Author(s) : Noor Azuan Bin Abu Osman Source : American Journal of Physical Medicine Rehabilitation DOI : 10.1097/PHM.0000000000000134 |
100. |
Design and biomechanical performance analysis of a user-friendly orthotic device
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Materials Design |
101. |
Effect of Geometrical Parameters on the Performance of Longitudinal Functionally Graded Femoral Prostheses
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Artificial Organs DOI : 10.1111/aor.12315 |
102. |
Comparison study of the prosthetics interface pressure profile of air splint socket and ICRC polypropylene socket for upper limb prosthetics
2015
Source : Biocybernetics and Biomedical Engineering |
103. |
Re: Re: Quantitative and Qualitative Comparison of a New Prosthetic Suspension System with Two Existing Suspension Systems for Lower Limb Amputees
2015
Author(s) : Noor Azuan Bin Abu Osman Source : American Journal of Physical Medicine Rehabilitation |
104. |
Epigallocatechin Gallate/Layered Double Hydroxide Nanohybrids: Preparation, Characterization, and In Vitro Anti-Tumor Study
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Plos One DOI : 10.1371/journal.pone.0136530 |
105. |
Endothelial cell responses in terms of adhesion, proliferation, and morphology to stiffness of polydimethylsiloxane elastomer substrates
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of Biomedical Materials Research Part A DOI : 10.1002/jbm.a.35186 |
106. |
Evaluation of Trigonella foenum-graecum extract in combination with swimming exercise compared to glibenclamide consumption on type 2 Diabetic rodents
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Food & Nutrition Research DOI : 10.3402/fnr.v59.29717 |
107. |
Mechanical and physical behaviour of newly developed functionally graded materials and composites of stainless steel 316L with calcium silicate and hydroxyapatite
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of the Mechanical Behavior of Biomedical Materials DOI : 10.1016/j.jmbbm.2015.05.020 |
108. |
Lower Extremities Biomechanics of Regular Stair Climbing : Slim Versus Obese
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Biomedical Engineering-Applications Basis Communications DOI : 10.4015/S1016237215500362 |
109. |
A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Science and Technology of Advanced Materials |
110. |
Fabrication and characterization of DLC coated microdimples on hip prosthesis heads
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of Biomedical Materials Research Part B: Applied Biomaterials DOI : 10.1002/jbm.b.33274 |
111. |
Mechanochemical Synthesis and Characterization of Silver (Ag+) and Tantalum (Ta5+)Doped Calcium Silicate Nanopowders
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Science of Advanced Materials DOI : 10.1166/sam.2015.2403 |
112. |
Design and biomechanical performance analysis of a user-friendly orthotic device
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Materials and Design DOI : 10.1016/j.matdes.2014.09.075 |
113. |
Effect of starch content on the biodegradation of polycaprolactone/starch composite for fabricating in situ pore-forming scaffolds
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Polymer Testing DOI : 10.1016/j.polymertesting.2015.02.012 |
114. |
Characterization and Mechanical Properties of Calcium Silicate/Citric Acid-Based Polymer Composite Materials
2015
Author(s) : Noor Azuan Bin Abu Osman Source : International Journal of Applied Ceramic Technology DOI : 10.1111/ijac.12151 |
115. |
Effect of Tricalcium Magnesium Silicate Coating on the Electrochemical and Biological Behavior of Ti-6Al-4V Alloys
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Plos One DOI : 10.1371/journal.pone.0138454 |
116. |
Cerebellum-inspired neural network solution of the inverse kinematics problem
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Biological Cybernetics DOI : 10.1007/s00422-015-0661-7 |
117. |
Parametric study of radial functionally graded femoral prostheses with different geometries
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Meccanica DOI : 10.1007/s11012-015-0121-4 |
118. |
Effect of layer printing delay on mechanical properties and dimensional accuracy of 3D printed porous prototypes in bone tissue engineering
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Ceramics International DOI : 10.1016/j.ceramint.2015.03.004 |
119. |
In Vitro Study of Surface Modified Poly(ethylene glycol)-Impregnated Sintered Bovine Bone Scaffolds on Human Fibroblast Cells
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Scientific Reports DOI : 10.1038/srep09806 |
120. |
Effect of Geometrical Parameters on the Performance of Longitudinal Functionally Graded Femoral Prostheses
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Artificial Organs |
121. |
Evaluation of postural steadiness in below-knee amputees when wearing different prosthetic feet during various sensory conditions using the Biodex Stability System
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Proceedings of the Institution of Mechanical Engineers Part H-Journal of Engineering in Medicine DOI : 10.1177/0954411915587595 |
122. |
A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Science and Technology of Advanced Materials DOI : 10.1088/1468-6996/16/3/033502 |
123. |
Effect of layer printing delay on mechanical properties and dimensional accuracy of 3D printed porous prototypes in bone tissue engineering
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Ceramics International |
124. |
Mechanical and physical behavior of newly developed functionally graded materials and composites of stainless steel 316L with calcium silicate and hydroxyapatite
2015
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of the Mechanical Behavior of Biomedical Materials |
125. |
Clinical implication of interface pressure for a new prosthetic suspension system
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Biomedical Engineering Online DOI : 10.1186/1475-925X-13-89 |
126. |
Are the Spatio-temporal Parameters of Gait Capable of Distinguishing a Faller from a Non- faller Elderly?
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Eur J Phys Rehabil Med |
127. |
Artificial neural network approach to estimate the composition of chemically synthesized biphasic calcium phosphate powders
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Ceramics International DOI : 10.1016/j.ceramint.2014.04.095 |
128. |
Improved bio- physical performance of hydroxyapatite coatings obtained by electrophoretic deposition at dynamic voltage
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Ceramics International DOI : 10.1016/j.ceramint.2014.04.116 |
129. |
Is metal nanofluid reliable as heat carrier?
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of Hazardous Materials DOI : 10.1016/j.jhazmat.2014.03.055 |
130. |
The effects of prosthetic foot type and visual alteration on postural steadiness in below-knee amputees
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Biomedical Engineering Online DOI : 10.1186/1475-925X-13-23 |
131. |
Effects of Surface Coating On Reducing Friction And Wear Of Orthopaedic Implants: A Review.
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Science and Technology of Advanced Meterials |
132. |
Prosthetics socket that incorporates an air splint system focusing on dynamic interface pressure
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Biomedical Engineering Online DOI : 10.1186/1475-925X-13-108 |
133. |
Gait biomechanics of individuals with transtibial amputation:effect of suspension system
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Plos One DOI : 10.1371/journal.pone.0096988 |
134. |
Quantitative analysis of human ankle characteristics at different gait phases and speeds for utilizing in ankle-foot prosthetic design
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Biomedical Engineering Online DOI : 10.1186/1475-925X-13-19 |
135. |
Technology Efficacy in Active Prosthetic Knees for Transfemoral Amputees: A Qualitative Evaluation
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Scientific World Journal |
136. |
Intrarater Test-Retest Reliability of Static and Dynamic Stability Indexes Measurement Using the Biodex Balance System During Unilateral Stance
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of Applied Biomechanics |
137. |
Three-dimensional finite element analyses of functionally graded femoral prostheses with different geometrical configurations
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Materials & Design DOI : 10.1016/j.matdes.2013.12.054 |
138. |
Role of Morphological Structure, Doping, and Coating of Different Materials in the Sensing Characteristics of Humidity Sensors
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Sensors DOI : 10.3390/s140916343 |
139. |
Synthesis, mechanical properties and in vitro biocompatibility with osteoblasts of calcium silicate reduced graphene oxide composites
2014
Author(s) : Noor Azuan Bin Abu Osman Source : ACS Applied Materials & Interfaces DOI : 10.1021/am500845x |
140. |
Mechanical and physical properties of calcium silicate/alumina composite for biomedical engineering applications
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of the Mechanical Behavior of Biomedical Materials DOI : 10.1016/j.jmbbm.2013.10.024 |
141. |
Effect of Intra-Articular Hyaluronic Injection on Postural Stability and Risk of Fall in Patients with Bilateral Knee Osteoarthritis
2014
Source : The Scientific World Journal DOI : 10.1155/2014/815184 |
142. |
Comparative study between Dermo, Pelite and Seal- In X5 liners: Effect on patient s satisfaction and perceived problems
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Scientific World Journal DOI : 10.1155/2014/769810 |
143. |
Comparison of various functionally graded femoral prostheses by finite element analysis
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Scientific World Journal DOI : 10.1155/2014/807621 |
144. |
Balance control in lower extremity amputees during quiet standing: A systematic review.
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Gait & Posture |
145. |
Development and performance of a new prosthesis system using ultrasonic sensor for wrist movements:a preliminary study
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Biomedical Engineering Online DOI : 10.1186/1475-925X-13-49 |
146. |
Extracellular matrix integrity affects the mechanical behaviour of in-situ chondrocytes under compression
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of Biomechanics DOI : 10.1016/j.jbiomech.2014.01.003 |
147. |
Design and Development of Potential Tissue Engineering Scaffolds from Structurally Different Longitudinal Parts of a Bovine-Femur
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Scientific Reports DOI : 10.1038/srep05843 |
148. |
Wear Debris Characterization and Corresponding Biological Response: Artificial Hip and Knee Joints
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Materials |
149. |
New method for the isolation of endothelial cells from large vessels
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Cytotherapy DOI : 10.1016/j.jcyt.2014.01.010 |
150. |
Development of an Air Pneumatic Suspension System for Transtibial Prostheses
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Sensors DOI : 10.3390/s140916754 |
151. |
The Effects of Suction and Pin/Lock Suspension Systems on Transtibial Amputees' Gait Performance
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Plos One DOI : 10.1371/journal.pone.0094520 |
152. |
Biomechanics principle of elbow joint for transhumeral prostheses:comparison of normal hand, body-powered, myoelectric & air splint prostheses
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Biomedical Engineering Online DOI : 10.1186/1475-925X-13-134 |
153. |
Postural stability characteristics of transtibial amputees wearing different prosthetic foot types when standing on various support surfaces
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Scientific World Journal DOI : 10.1155/2014/856279 |
154. |
Balance and risk of fall in individuals with bilateral mild and moderate knee osteoarthritis
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Plos One DOI : 10.1371/journal.pone.0092270 |
155. |
Review Of The Socket Design And Interface Pressure Measurement For Transtibial Prosthesis
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Scientific World Journal DOI : 10.1155/2014/849073 |
156. |
Magnesium incorporated hydroxyapatite: Synthesis and structural properties characterization
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Ceramics International |
157. |
Effect of Exercise and Gait Retraining on Knee Adduction Moment in People with Knee Osteoarthritis
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Proceedings of The Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine DOI : 10.1177/0954411914521155 |
158. |
Nature and Pattern of Cricket Injuries: The Asian Cricket Council Under-19 Elite Cup, 2013
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Plos One DOI : 10.1371/journal.pone.0100028 |
159. |
Treatment stability of Milwaukee brace in idiopathic hyperkyphosis
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Prosthetics and Orthotics International DOI : 10.1177/0309364613499063 |
160. |
Evaluation of new suspension system for limb prosthetics
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Biomedical Engineering Online |
161. |
Mechanical and In Vitro Biological Performance of Graphene Nanoplatelets Reinforced Calcium Silicate Composite
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Plos One DOI : 10.1371/journal.pone.0106802 |
162. |
Facile synthesis of calcium silicate hydrate using sodium dodecyl sulfate as a surfactant assisted by ultrasonic irradiation.
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Ultrasonics Sonochemistry DOI : 10.1016/j.ultsonch.2013.08.012 |
163. |
Transfemoral Prosthesis Suspension Systems A Systematic Review of the Literature
2014
Author(s) : Noor Azuan Bin Abu Osman Source : American Journal of Physical Medicine Rehabilitation |
164. |
Effect of layer thickness and printing orientation on mechanical properties and dimensional accuracy of 3D printed porous samples for bone tissue engineering
2014
Author(s) : Noor Azuan Bin Abu Osman Source : Plos One |
165. |
Evaluation of Copper Concentration in Subclinical Cases of White Muscle Disease and Its Relationship with Cardiac Troponin I the early stages of White Muscle Disease
2013
Author(s) : Noor Azuan Bin Abu Osman Source : PLOS ONE |
166. |
Sensitivity analysis of left ventricle with dilated cardiomyopathy in fluid structure simulation
2013
Author(s) : Noor Azuan Bin Abu Osman Source : PLOS ONE |
167. |
Internal-external circumferential crack behavior in the cement layer of total hip replacement
2013
Author(s) : Noor Azuan Bin Abu Osman Source : FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES |
168. |
Finite element analysis on longitudinal and radial functionally graded femoral prosthesis.
2013
Author(s) : Noor Azuan Bin Abu Osman Source : International Journal for Numerical Methods in Biomedical Engineering |
169. |
100 top-cited scientific papers in limb prosthetics
2013
Author(s) : Noor Azuan Bin Abu Osman Source : Biomedical Engineering Online |
170. |
A Robotic Model of Transfemoral Amputee Locomotion for Design Optimization of Knee Controllers.
2013
Author(s) : Noor Azuan Bin Abu Osman Source : INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS |
171. |
Motion Analysis of normal Patellar Tendon Reflex
2013
Source : Canadian Journal of Neurological Sciences |
172. |
Satisfaction and problems experienced with transfemoral suspension systems: a comparison between common suction socket and Seal-In liner
2013
Author(s) : Noor Azuan Bin Abu Osman Source : Archives of Physical Medicine and Rehabilitation |
173. |
Approximating the relationship among the degree of the reaction forces and the nodes on footprint during a stance phase.
2013
Author(s) : Noor Azuan Bin Abu Osman Source : Applied Mathematical Modelling |
174. |
Influence of age on patellar tendon reflex response
2013
Author(s) : Noor Azuan Bin Abu Osman,Lim Kheng Seang Source : Plos One DOI : 10.1371/journal.pone.0080799 |
175. |
An experimental study of the interface pressure profile during level walking of a new suspension system for lower limb amputees
2013
Author(s) : Noor Azuan Bin Abu Osman Source : Clinical Biomechanics |
176. |
Preliminary analysis of knee stress in full extension landing.
2013
Author(s) : Noor Azuan Bin Abu Osman Source : Clinics |
177. |
Bioactivity and Biocompatibility Studies on Silk- Based Scaffold for Bone Tissue Engineering
2013
Author(s) : Noor Azuan Bin Abu Osman Source : Journal Of Medical And Biological Engineering |
178. |
The properties of chondrocyte membrane reservoirs and their role in impact-induced cell death.
2013
Author(s) : Noor Azuan Bin Abu Osman Source : Biophysical journal |
179. |
Dental Implants From Functionally Graded Materials: A Review
2013
Source : Journal of Biomedical Materials Research Part A |
180. |
Development of a Micro-Gripper Using Piezoelectric Bimorphs
2013
Author(s) : Noor Azuan Bin Abu Osman Source : Sensors |
181. |
Numerical investigation of the effect of cannula placement on thrombosis
2013
Author(s) : Noor Azuan Bin Abu Osman Source : Theoretical Biology and Medical Modelling DOI : doi.org/10.1186/1742-4682-10-35 |
182. |
The Capability of Fiber Bragg Grating Sensors to Measure Amputees� Trans-Tibial Stump/Socket Interface Pressures
2013
Author(s) : Noor Azuan Bin Abu Osman Source : Sensors |
183. |
Influence of Functional Knee Bracing on the Isokinetic and Functional Tests of Anterior Cruciate Ligament Deficient Patients
2013
Author(s) : Noor Azuan Bin Abu Osman Source : PLOS ONE |
184. |
Development and Evaluation of New Coupling System for Lower Limb Prostheses with Acoustic Alarm System.
2013
Author(s) : Noor Azuan Bin Abu Osman Source : Scientific Reports |
185. |
Kinematic Comparison of the Wrist Movements that are Possible with a Biomechatronics Wrist Prosthesis and a Body-powered Prosthesis. A Preliminary Study
2013
Author(s) : Noor Azuan Bin Abu Osman Source : Disability and Rehabilitation: Assistive Technology. |
186. |
Developments of Immobilized Surface Modified Piezoelectric Crystal Biosensors for Advanced Applications
2013
Author(s) : Noor Azuan Bin Abu Osman Source : International Journal of Electrochemical Science |
187. |
Design of new generation femoral prostheses using functionally graded materials: A finite element analysis
2013
Author(s) : Noor Azuan Bin Abu Osman Source : Proceedings of the I MECH E Part H Journal of Engineering in Medicine |
188. |
Finite Element Analysis of Circumferential Crack Behavior in Cement-Femoral Prosthesis Interface.
2013
Author(s) : Noor Azuan Bin Abu Osman Source : MATERIALS & DESIGN |
189. |
The validity and reliability of motion analysis in patellar tendon reflex assessment
2013
Author(s) : Noor Azuan Bin Abu Osman,Lim Kheng Seang Source : PLOS ONE |
190. |
Interface pressure in transtibial socket during ascent and descent on stairs and its effect on patient satisfaction
2013
Author(s) : Noor Azuan Bin Abu Osman Source : Clinical Biomechanics |
191. |
Dual Photon Excitation Microscopy and Image Threshold Segmentation in Live Cell Imaging during Compression Testing
2013
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of Biomechanics |
192. |
Effect of Milwaukee brace on static and dynamic balance of female hyperkyphotic adolescents
2013
Author(s) : Noor Azuan Bin Abu Osman Source : Prosthetics & Orthotics International |
193. |
In vivo and in vitro outcomes of alumina, zirconia and their composited ceramic-on-ceramic hip joints
2013
Author(s) : Wan Abu Bakar Bin Wan Abas,Noor Azuan Bin Abu Osman,Hanie Nadia Binti Shasmin,Herman Shah Bin Abd Rahman, Dipankar Choudhury Source : Ceramic Society of Japan |
194. |
Enhanced performance with elastic resistance during the eccentric phase of a countermovement jump
2013
Author(s) : Noor Azuan Bin Abu Osman Source : International Journal of Sports Physiology and Performance |
195. |
Review on CFD simulation in heart with dilated cardiomyopathy and myocardial infarction.
2013
Author(s) : Noor Azuan Bin Abu Osman Source : Review on CFD simulation in heart with dilated cardiomyopathy and myocardial infarction. |
196. |
Anthropometric and strength characteristics of tenpin
bowlers with different playing abilities.
2012
Author(s) : Noor Azuan Bin Abu Osman Source : Biology of Sport |
197. |
Qualitative Study of Prosthetic Suspension
Systems
on Individuals with Transtibial Amputation's
Satisfaction
and Perceived Problems with Their Prosthetic
Devices
2012
Author(s) : Noor Azuan Bin Abu Osman Source : Archives of Physical Medicine and Rehabilitation |
198. |
Transtibial prosthetic suspension : less pistoning versus easy donning and doffing
2012
Author(s) : Wan Abu Bakar Bin Wan Abas,Noor Azuan Bin Abu Osman Source : Journal of Rehabilitation Research & Development |
199. |
Clinical Investigation of the Interface Pressure
in the Trans Tibial Socket with Dermo and Seal-In
X5 Liners During Walking and Their Effect on
Patient Satisfaction
2012
Author(s) : Noor Azuan Bin Abu Osman Source : Clinical Biomechanics |
200. |
Mechanical Behavior of in-situ Chondrocytes
Subjected to Different Loading Rates: A Finite
Element Study.
2012
Author(s) : Noor Azuan Bin Abu Osman,Belinda Murphy Source : Biomechanics and Modelling in Mechanobiology |
201. |
Comparison of Nanostructured Nickel Zinc Ferrite
and Magnesium Copper Zinc Ferrite Prepared by
Water-In-Oil
Microemulsion
2012
Author(s) : Noor Azuan Bin Abu Osman Source : Electronic Materials Letters |
202. |
Electromyographic Activity of the Lower Limb
Muscles
during Salats
2012
Author(s) : Wan Abu Bakar Bin Wan Abas,Noor Azuan Bin Abu Osman Source : The Journal of Physical Therapy Science |
203. |
Biomechanical Evaluation of the Relationship
between Postural Control and Body Mass Index.
2012
Author(s) : Noor Azuan Bin Abu Osman Source : Journal Of Biomechanic |
204. |
Development Process of New Bumper Beam for
Passenger
Car: A Review.
2012
Author(s) : Noor Azuan Bin Abu Osman Source : Materials & Design |
205. |
The Use of Fiber Bragg Grating Sensors in Biomechanics
and Rehabilitation Applications: The State-of-the-Art
and Ongoing Research Topics.
2012
Author(s) : Noor Azuan Bin Abu Osman Source : Sensors |
206. |
Effect of Vacuum-assisted Socket and Pin Suspensions on Socket Fit
2012
Author(s) : Noor Azuan Bin Abu Osman Source : Archives of Physical Medicine and Rehabilitation |
207. |
Progress of key strategies in development of
electrospun scaffolds: bone tissue
Scaffolds: Bone Tissue.
2012
Author(s) : Noor Azuan Bin Abu Osman,Belinda Murphy Source : Science And Technology Of Advanced Materials |
208. |
Clinical Evaluation of Two Prosthetic Suspension Systems in a Bilateral Transtibial Amputee.
2012
Author(s) : Noor Azuan Bin Abu Osman Source : American Journal of Physical Medicine and Rehabilitation |
209. |
Rapid prototyping models for dysplastic hip
surgeries in Malaysia.
2012
Author(s) : Noor Azuan Bin Abu Osman Source : European Journal of Orthopaedic Surgery and Trauma |
210. |
FDM models and FEA in dysplastic hip
2012
Author(s) : Noor Azuan Bin Abu Osman Source : Rapid Prototyping Journal |
211. |
The effect on human balance of standing with toe-
extension
2012
Author(s) : Noor Azuan Bin Abu Osman Source : PloS ONE |
212. |
Pistoning Assessment in Lower Limb Prosthetic
Sockets: A Literature Review
2012
Author(s) : Noor Azuan Bin Abu Osman Source : Prosthetics and Orthotics International |
213. |
Transtibial prosthetic socket pistoning: Static
evaluation of Seal-In X5 and Dermo Liner
using motion
analysis system
2012
Author(s) : Noor Azuan Bin Abu Osman Source : Clinical Biomechanics |
214. |
Quantitative and Qualitative Comparison of a New Prosthetic Suspension System with Two Existing Suspension Systems for Lower Limb Amputees
2012
Author(s) : Noor Azuan Bin Abu Osman Source : American Journal of Physical Medicine & Rehabilitation DOI : 10.1097/PHM.0b013e318269d82a |
215. |
Morphological Change of Heat Treated Bovine Bone: A Comparative Study.
2012
Author(s) : Noor Azuan Bin Abu Osman Source : MATERIALS |
216. |
Effects of a Prophylactic Knee Brace and Two
Neoprene Knee Sleeves on the Performance of
Healthy Athletes: A Crossover Randomized
Controlled Trial.
2012
Author(s) : Noor Azuan Bin Abu Osman Source : PLOS ONE |
217. |
Design and Validation of a Bi-axial Loading Bioreactor for Mechanical Stimulation of Engineered Cartilage
2011
Author(s) : Noor Azuan Bin Abu Osman,Belinda Murphy Source : Medical Engineering & Physics |
218. |
A new approach for the pistoning measurement in
transtibial prosthesis
2011
Author(s) : Noor Azuan Bin Abu Osman Source : Prosthetics and Orthotics International |
219. |
Investigation to predict patellar tendon reflex
using
motion analysis technique
2011
Author(s) : Noor Azuan Bin Abu Osman,Belinda Murphy Source : Medical Engineering & Physics |
220. |
Preliminary report: rapid prototyping models for
Dysplastic hip surgery
2011
Author(s) : Noor Azuan Bin Abu Osman Source : Central European Journal of Medicine |
221. |
Acute Effect of Static and Dynamic Stretching on
Hip Dynamic Range of Motion (DROM) during Instep
Kicking
in Professional Soccer Players
2011
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of Strength and Conditioning Research |
222. |
Comments on Assessment of amputee socket-stump-
residual bone kinematics during strenuous
activities using
Dynamic Roentgen Stereogrammetric Analysis
2011
Author(s) : Noor Azuan Bin Abu Osman Source : Journal Of Biomechanic |
223. |
Biomechanical Responses of Thigh and Lower Leg
during 10 Consecutive Soccer Instep Kicks.
2011
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of Strength aand Conditioning Research |
224. |
The Metabolic Dynamics of Cartilage Explants over a Long-Term Culture Period.
2011
Author(s) : Noor Azuan Bin Abu Osman,Belinda Murphy Source : Clinics |
225. |
Transducers for the determination of the pressure
and shear stress distribution at the stump/socket
interface of trans-tibial amputees.
2010
Author(s) : Noor Azuan Bin Abu Osman Source : Proceedings of the I MECH E Part B Journal of Engineering Manufacture |
226. |
Electromyography Assessments of the Vastus
Medialis Muscle during Soccer Instep Kicking
between Dynamic and Static Stretching.
2010
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of human kinetics |
227. |
The patellar tendon bar! Is it a necessary
feature?
2010
Author(s) : Noor Azuan Bin Abu Osman Source : Medical Engineering & Physics |
228. |
Kinematics Analysis: Number of Trials Necessary
to Achieve Performance Stability during Soccer
Instep
Kicking
2010
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of Human Kinetics |
229. |
Rapid Prototyping Medical Models for Dysplastic
Hip Orthopaedic Surgery
2010
Author(s) : Azhar Bin Mahmood @ Azhar Mahmood Merican,John George,Nukman Bin Yusoff,Noor Azuan Bin Abu Osman,Dakhsyani K R Source : Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture |
230. |
Interface Pressure Profile Analysis for
Patellar-Tendon-Bearing Socket and Hydrostatic
Socket
2009
Author(s) : Noor Azuan Bin Abu Osman Source : Acta of Bioengineering and Biomechanics |
231. |
Biomechanical Responds of Instep Kick between
Different Positions in Professional Soccer
Players.
2009
Author(s) : Ashril Bin Yusof,Noor Azuan Bin Abu Osman Source : Journal of Human Kinetics. |
232. |
Relationship Of The Light Intensity Of Selected
Light
Curing Units With Varying Distance And Angulation
Of
The Light Curing Tip And Lightmeter
2008
Author(s) : Noor Azuan Bin Abu Osman Source : Annal Dent. |
233. |
Development of Mechanical Prosthetic Hand System
for
BCI Application
2008
Author(s) : Noor Azuan Bin Abu Osman Source : Eur J of Scientific Research |
234. |
Preliminary Design of an Automated Rapid
Maxillary
Expander for Dento-Facial Application
2007
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of Biomechanics |
235. |
Fractal Characterisation of Gait in Parkinson s
Disease Using Detrended Fluctuation Analysis
2007
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of Biomechanics |
236. |
The Effect Of Load Carriage Among Primary School
Boys
2007
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of Mechanics in Medicine and Biology |
237. |
A New Pylon Materials in Transtibial Prosthesis: A Preliminary Study
2007
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of Biomechanics |
238. |
A Study of the External Finger Fixator to Correct Flexion Deformity
2007
Author(s) : Tunku Sara Binti Tunku Ahmad Yahaya,Wan Abu Bakar Bin Wan Abas,Noor Azuan Bin Abu Osman,Herman Shah Bin Abd Rahman Source : Journal of Biomechanics |
239. |
Conflict of Services of Prosthetic Rehabilitation
in
Malaysia
2007
Author(s) : Noor Azuan Bin Abu Osman Source : Eur J of Scientific Research |
240. |
A Study of the External Finger Fixator to Correct Flexion Deformity
2007
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of Biomechanics |
241. |
Body Performance Standards of Healthy Malaysians:
Adult Range of Fitness Level
2007
Author(s) : Wan Abu Bakar Bin Wan Abas,Noor Azuan Bin Abu Osman Source : Journal of Biomechanics |
242. |
Passivity Based Control of Automated Driver based on Velocity Field
2006
Author(s) : Noor Azuan Bin Abu Osman Source : Engineering e-Transaction |
243. |
Vision based automatic steering control using a
PID
controller
2006
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of Technology |
244. |
Pneumatic Artificial Muscle in Biomedical Applications.
2006
Author(s) : Noor Azuan Bin Abu Osman Source : In 3rd Kuala Lumpur International Conference on Biomedical Engineering 2006 |
245. |
Acceptable Load Carriage for Primary School Girls
2006
Author(s) : Noor Azuan Bin Abu Osman Source : Eur J of Scientific Research |
246. |
Intelligent Control for Self-erecting Inverted
Pendulum via Adaptive Neuro-Fuzzy Inference System
2006
Author(s) : Noor Azuan Bin Abu Osman Source : American Journal of Applied Sciences |
247. |
An innovative survey poles configuration: An alternative 3D volume calibrating system
2003
Author(s) : Noor Azuan Bin Abu Osman Source : Jurnal Teknologi |
248. |
AN APPROACH FOR THE CORRELATION OF EMG SIGNALS AND THE RECTIFICATION OF PTB SOCKETS
2002
Author(s) : Noor Azuan Bin Abu Osman Source : JOURNAL OF MECHANICS IN MEDICINE AND BIOLOGY |
249. |
Biomechanical evaluation on gait pattern of pregnant subjects.
2002
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of Mechanics in Medicine and Biology DOI : 10.1142/S0219519402000289 |
250. |
BIOMECHANICAL EVALUATION ON GAIT PATTERN OF PREGNANT SUBJECTS
2002
Author(s) : Noor Azuan Bin Abu Osman Source : JOURNAL OF MECHANICS IN MEDICINE AND BIOLOGY |
251. |
An approach for the correlation of EMG signals and the rectification of PTB sockets
2002
Author(s) : Noor Azuan Bin Abu Osman Source : Journal of Mechanics in Medicine and Biology DOI : 10.1142/S0219519402000150 |
BOOK
NO | DETAILS OF BOOK |
---|---|
1. |
Machine Learning in Elite Volleyball
2021
Author(s) : Noor Azuan Bin Abu Osman Source : SPRINGERBRIEFS IN APPLIED SCIENCES AND TECHNOLOGY |
2. |
Composites in Biomedical Applications
2020
Author(s) : Nukman Bin Yusoff,Noor Azuan Bin Abu Osman |
3. |
Conference Programme and Abstract Book, 5th Kuala Lumpur International Conference on Biomedical Engineering (Biomed 2011)
2011
Author(s) : Wan Abu Bakar Bin Wan Abas,Noor Azuan Bin Abu Osman,Nahrizul Adib Bin Kadri,Ahmad Khairi Bin Abdul Wahab,Ting Hua Nong |
4. |
An Integrated Approach for 3D Model. Theoretical Background
2010
Author(s) : Noor Azuan Bin Abu Osman |
5. |
Motion Analysis System: An Integrated Approach (2nd ed.). (2009).
2009
Author(s) : Noor Azuan Bin Abu Osman |
6. |
Motion Analysis System: An Integrated Approach
2001
Author(s) : Noor Azuan Bin Abu Osman,Nahrizul Adib Bin Kadri |
CHAPTER IN BOOK
NO | DETAILS OF CHAPTER IN BOOK |
---|---|
1. |
International Federation for Medical and Biological
Engineering Proceedings (IFMBE Proc.) Springer 2008¿
Vol. 21; ISBN 978-3-540-69138-9.
2008
Author(s) : Noor Azuan Bin Abu Osman |
2. |
Radzi Z, Yahya NA, Abu Kasim NH, Abu Osman NA, Yusof ZYM, Mohd FN et al. Validation of Cone Beam CT Scan for Measurement of Palatal Depth in Study Casts. In: Abu Osman ed. International Federation for Medical and Biological Engineering. Berlin: Heidelberg Springer 2008 Vol. 21; 978-3-540- 69138-9 (ISI-Cited Proc.) 758-761.
2008
Author(s) : Noor Azlin Binti Yahya,Noor Hayaty Binti Abu Kasim,Zamri Bin Radzi,Noor Azuan Bin Abu Osman,Zamros Yuzadi Bin Mohd Yusof |
3. |
International Federation for Medical and Biological
Engineering (IFMBE Proc.) Springer 2006¿ Vol. 15; ISSN
1727-1983, ISBN 978-3-540-68016.
2006
Author(s) : Noor Azuan Bin Abu Osman |
PROCEEDING
NO | DETAILS OF PROCEEDING |
---|---|
1. |
The First Decade of Biomedical Engineering Degree
Program at the University of Malaya
2008
Author(s) : Noor Azuan Bin Abu Osman |
2. |
Comparing Manufacturer¿s Point Calibration and
Modified Calibration Setup for F-Scan Insole Sensor
System: A Preliminary Assessment
2008
Author(s) : Noor Azuan Bin Abu Osman |
3. |
Validation of Finite Element Analysis for a New
External Finger Fixator to Correct Flexion Deformity ¿
A Preliminary Result
2008
Author(s) : Noor Azuan Bin Abu Osman |
4. |
Development of an Alternative Socket Fabrication
Method Using Hydrostatic Cast System: A Preliminary
Study.
2008
Author(s) : Noor Azuan Bin Abu Osman |
5. |
The Facial Soft Tissue Simulation of Orthognathic
Surgery Using Biomechanical Model.
2008
Author(s) : Noor Azuan Bin Abu Osman |
6. |
Validation of
Finite Element Analysis for a New External Finger
Fixator to Correct Flexion Deformity. A Preliminary
Result.
2008
Author(s) : Tunku Sara Binti Tunku Ahmad Yahaya,Wan Abu Bakar Bin Wan Abas,Noor Azuan Bin Abu Osman,Herman Shah Bin Abd Rahman |
7. |
Acquiring Anatomical Representation of Human Maxilla
for Rapid Maxillary Expansion.
2008
Author(s) : Noor Azuan Bin Abu Osman |
8. |
3D Finite Element Analysis of Ankle-Foot Orthosis on Patients with Unilateral Foot Drop: A Preliminary Study
2008
Author(s) : Noor Azuan Bin Abu Osman |
9. |
Finite Element Analysis of An Automated Rapid
Maxillary Expander (ARME).
2008
Author(s) : Noor Hayaty Binti Abu Kasim,Noor Azuan Bin Abu Osman |
10. |
A Finite Element Approach for the Planning and
Simulation of 3D Reconstruction of Maxillofacial
Deformities.
2008
Author(s) : Noor Azuan Bin Abu Osman |
11. |
The First Decade of Biomedical Engineering Degree
Programme at the University of Malaya: Experiences
and
Achievements
2008
Author(s) : Wan Abu Bakar Bin Wan Abas,Noor Azuan Bin Abu Osman,Raha Binti Mat Ghazali,Nahrizul Adib Bin Kadri |
12. |
Validation of Cone Beam CT Scan for Measurement
of
Palatal Depth in Study Casts.
2008
Author(s) : Noor Azuan Bin Abu Osman,Siti Adibah Binti Othman |
13. |
Comparison between Biomechanical Characteristics of
Stainless Steel and Bamboo Pylons: A Preliminary Study.
2008
Author(s) : Noor Azuan Bin Abu Osman,Lydia Binti Abdul Latif |
14. |
Economical Tube Adapter Material in Below Knee
Prosthesis.
2008
Author(s) : Noor Azuan Bin Abu Osman,Lydia Binti Abdul Latif |
15. |
Towards Better Understanding of Shoe-Turf Surface
Induced Soccer Injuries.
2008
Author(s) : Noor Azuan Bin Abu Osman |
16. |
An Alternative Coating Technique To Strengthen Pin-
Bone Interface Stresses For External Fracture
Fixation: A Preliminary Study.
2008
Author(s) : Noor Azuan Bin Abu Osman |
17. |
The Effect of Light Curing Tip Angulations on the
Shear Bond Strength of an Orthodontic Adhesive
2008
Author(s) : Noor Azuan Bin Abu Osman |
18. |
Design of an Automated Rapid Maxillary Expansion (RME)
appliance.
2006
Author(s) : Noor Azuan Bin Abu Osman |
19. |
Standardization of Distance and Angulation of Light
Curing Unit Tip Using Distometer.
2006
Author(s) : Noor Azuan Bin Abu Osman |
20. |
Multiple Neural Networks for Human Face Recognition.
2006
Author(s) : Noor Azuan Bin Abu Osman |
21. |
An ANFIS Controller for Vision-based Lateral
Vehicle
Control System
2006
Author(s) : Noor Azuan Bin Abu Osman |
22. |
Prosthetic Hand for the Brain-computer Interface
System.
2006
Author(s) : Noor Azuan Bin Abu Osman |
23. |
A Preliminary Case Study of Anal Retractor Usability
in Anorectal Surgery.
2006
Author(s) : Noor Azuan Bin Abu Osman |
24. |
Load Carriage for School Children.
2006
Author(s) : Noor Azuan Bin Abu Osman |
25. |
Development of Prosthetic Hand.
2006
Author(s) : Noor Azuan Bin Abu Osman |
26. |
The Contribution of Upper Limb Joints in the
Development of Racket Velocity in Badminton Smash.
2005
Author(s) : Noor Azuan Bin Abu Osman |
27. |
A simplified method of producing trans-tibial
prosthetic socket.
2004
Author(s) : Noor Azuan Bin Abu Osman |
28. |
Design and development of transducers for the
measurement of trans-tibial stump/socket interface
stresses.
2004
Author(s) : Noor Azuan Bin Abu Osman |
29. |
A simple and low cost method of producing a prosthetic
socket for trans-tibial amputees.
2004
Author(s) : Noor Azuan Bin Abu Osman |
30. |
The patellar tendon bar ¿ the case for or against!
2004
Author(s) : Noor Azuan Bin Abu Osman |
31. |
The patellar tendon bar ¿ the case for or against !
2004
Author(s) : Noor Azuan Bin Abu Osman |
32. |
Interface pressure measurement of Hydrocast and PTB
sockets.
2004
Author(s) : Noor Azuan Bin Abu Osman |
33. |
Pressure distribution in PTB and Hydrocast sockets.
2003
Author(s) : Noor Azuan Bin Abu Osman |
34. |
An assessment of reconstruction of points for two
overlapping calibrated volume
2002
Author(s) : Noor Azuan Bin Abu Osman |
35. |
A Comparative Study on Kinematics Parameters Between
The Sepak Kuda Serve and The Sepak Sila Serve in Sepak
Takraw
2002
Author(s) : Noor Azuan Bin Abu Osman |
36. |
Three Dimensional Cinematographic Analysis: Enlarging
A Calibrated Volume
2002
Author(s) : Noor Azuan Bin Abu Osman |
37. |
Biomechanical Analysis of the Men¿s Javelin Throw at
the 21st South East Asian Games
2002
Author(s) : Noor Azuan Bin Abu Osman |
38. |
Motion Analysis and Sports Biomechanics in Malaysia
2002
Author(s) : Noor Azuan Bin Abu Osman |
39. |
Study of the pressure distribution at the stump/socket
interface in a below knee prosthesis.
2001
Author(s) : Noor Azuan Bin Abu Osman |
40. |
Overview of data collection for 3-Dimensional motion
analysis during the final session of Thomas & Uber Cup
2000.
2001
Author(s) : Noor Azuan Bin Abu Osman |
41. |
Design, development and experimental studies of a
multi-positional stewart type robot manipulator.
2001
Author(s) : Noor Azuan Bin Abu Osman |
42. |
Biomechanical gait pattern of pregnant subjects.
2001
Author(s) : Noor Azuan Bin Abu Osman |
43. |
Electrical Engineering Components in Biomedical
Engineering Curriculum.
2000
Author(s) : Noor Azuan Bin Abu Osman |
44. |
Biomechanical measurement of stresses acting at the
patellar tendon bar by the rectification of a PTB
prosthesis socket.
2000
Author(s) : Noor Azuan Bin Abu Osman |
45. |
The ¿AS IS¿ and ¿WHERE TO¿ of Bioengineering.
2000
Author(s) : Noor Azuan Bin Abu Osman |
RESEARCH COLLABORATOR
GRANT | PROGRESS | STATUS |
---|