ARTICLE IN ACADEMIC JOURNALS
| NO | DETAILS OF ARTICLE IN ACADEMIC JOURNALS |
|---|---|
| 1. |
Bacteriophage encapsulation - Trends and potential applications in aquaculture
2025
Author(s) : Suriani Binti Ibrahim, Tuan Zaharinie Binti Tuan Zahari Source :
AQUACULTURE
DOI :
10.1016/j.aquaculture.2024.741398
|
| 2. |
Heat transfer performance of a compact heat exchanger based on metal foam and Thermal Interface Material (TIM)
2024
Source :
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
DOI :
10.1016/j.ijheatmasstransfer.2024.125861
|
| 3. |
Austenite-Grain-Growth Kinetics and Mechanism in Type 347H Alloy Steel for Boiler Tubes
2023
Author(s) : Tuan Zaharinie Binti Tuan Zahari Source :
ADVANCES IN MATERIALS SCIENCE
DOI :
10.2478/adms-2023-0018
|
| 4. |
Aerosol-assisted facile fabrication of bimetallic Cr2O3-Mn2O3 thin films for photoelectrochemical water splitting
2023
Author(s) : Norazilawati Binti Muhamad Sarih, Mohd Nashrul Bin Mohd Zubir, Tuan Zaharinie Binti Tuan Zahari Source :
NEW JOURNAL OF CHEMISTRY
DOI :
10.1039/d2nj06274g
|
| 5. |
INVESTIGATION ON MICROSTRUCTURE AND COMPRESSIVE STRENGTH OF BRAZING POROUS NICKEL TO COPPER AND STAINLESS STEEL
2023
Author(s) : Tuan Zaharinie Binti Tuan Zahari, Poo Balan A/l Ganesan Source :
ACTA METALLURGICA SLOVACA
DOI :
10.36547/ams.29.3.1863
|
| 6. |
Effect of deposition temperature on topography and electrochemical water oxidation of NiO thin films
2023
Author(s) : Zarina Binti Aspanut, Mohd Nashrul Bin Mohd Zubir, Tuan Zaharinie Binti Tuan Zahari, Muhammad Shakeel Ahmad Source :
THIN SOLID FILMS
DOI :
10.1016/j.tsf.2023.140031
|
| 7. |
Thermal resistance of Open-Cell metal foam with thermal interface materials (TIM)
2023
Author(s) : Tuan Zaharinie Binti Tuan Zahari, Poo Balan A/l Ganesan Source :
APPLIED THERMAL ENGINEERING
DOI :
10.1016/j.applthermaleng.2022.119336
|
| 8. |
Analysis of the Reaction Layer Formed during Sapphire-Sapphire Brazing Using a Ag-Cu-Ti Filler Metal for Gas-Pressure Sensors
2022
Source :
ACS APPLIED ELECTRONIC MATERIALS
DOI :
10.1021/acsaelm.2c00213
|
| 9. |
Vacuum brazing of titanium alloy to stainless steel enhance by fiber laser surface texturing
2021
Author(s) : Tuan Zaharinie Binti Tuan Zahari Source :
JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES
DOI :
10.15282/jmes.15.4.2021.12.0678
|
| 10. |
Versatile Fabrication of Binary Composite SnO2-Mn2O3 Thin Films by AACVD for Synergistic Photocatalytic Effect
2021
Source :
JOURNAL OF ELECTRONIC MATERIALS
DOI :
10.1007/s11664-021-08897-6
|
| 11. |
Optical and photocatalytic properties of biomimetic cauliflowered Ca2Mn3O8-CaO composite thin films
2020
Author(s) : Tuan Zaharinie Binti Tuan Zahari Source :
Journal of Solid State Chemistry
|
| 12. |
Experimental investigation on drag reduction of flowing crop suspensions of the pulp fibers in circular pipe heat exchanger
2020
Author(s) : Mohd Nashrul Bin Mohd Zubir, Kazi Md. Salim Newaz, Mahidzal Bin Dahari, Tuan Zaharinie Binti Tuan Zahari Source :
PARTICULATE SCIENCE AND TECHNOLOGY
DOI :
10.1080/02726351.2018.1564093
|
| 13. |
Effects of Brazing Parameters on the Microstructural and Mechanical Properties of a Porous Copper Heatsink
2020
Author(s) : Tuan Zaharinie Binti Tuan Zahari Source :
Green Manufacturing Processes and Systems
|
| 14. |
Fabrication of Ag-ZnO composite thin films for plasmonic enhanced water splitting
2020
Author(s) : Wan Jefrey Basirun, Tuan Zaharinie Binti Tuan Zahari Source :
MATERIALS CHEMISTRY AND PHYSICS
DOI :
doi.org/10.1016/j.matchemphys.2020.123220
|
| 15. |
Investigation on Strength and Microstructural Evolution of Porous Cu/Cu Brazed Joints Using Cu-Ni-Sn-P Filler
2020
Author(s) : Tuan Zaharinie Binti Tuan Zahari, Farazila Binti Yusof Source :
METALS
|
| 16. |
Experimental investigation on drag reduction of flowing crop suspensions of the pulp fibers in circular pipe heat exchanger
2019
Author(s) : Tuan Zaharinie Binti Tuan Zahari Source :
Particulate Science and Technology
DOI :
10.1080/02726351.2018.1564093
|
| 17. |
Improvement of Methadone Maintenance Treatment (MMT) Process Through Development and Implementation of Methadone Dispenser
2018
Source :
Journal of Testing and Evaluation
|
| 18. |
A novel, eco-friendly technique for covalent functionalization of grephene nanoplatelets and the potential of their nanofluids for heat transfer applications
2017
Author(s) : Tuan Zaharinie Binti Tuan Zahari Source :
Chemical Physics Letters
|
| 19. |
Functionalization and exfoliation of graphite into mono layer graphene for improved heat dissipation
2017
Author(s) : Tuan Zaharinie Binti Tuan Zahari Source :
Journal of the Taiwan Institute of Chemical Engineers
|
| 20. |
A bio-based, facile approach for the preparation of covalently functionalized carbon nanotubes aqueous suspensions and their potential as heat transfer fluids
2017
Author(s) : Samira Bagheri, Kazi Md. Salim Newaz, Tuan Zaharinie Binti Tuan Zahari, Ahmad Badarudin Bin Mohamad Badry, Mohd Nashrul Bin Mohd Zubir Source :
Journal of Colloid and Interface Science
|
| 21. |
Experimental study on heat transfer and thermo-physical properties of covalently functionalized carbon nanotubes nanofluids in an annular heat exchanger: A green and novel synthesis
2017
Source :
Energy & Fuels
|
| 22. |
Synthesis, stability, and thermophysical properties of aqueous colloidal dispersions of multi-walled carbon nanotubes treated with beta-alanine
2017
Author(s) : Houman Yarmand, Tuan Zaharinie Binti Tuan Zahari Source :
International Communications in Heat and Mass Transfer
DOI :
10.1016/j.icheatmasstransfer.2017.09.006
|
| 23. |
Development of optimum process parameters and a study of the effects of surface roughness on brazing of copper
2015
Author(s) : Tuan Zaharinie Binti Tuan Zahari Source :
Applied Surface Science
|
| 24. |
Microstructural analysis of brazing sapphire and Inconel 600 for sensor applications
2014
Author(s) : Tuan Zaharinie Binti Tuan Zahari Source :
Materials Research Innovations
|
| 25. |
Effect of brazing temperature on the shear strength of Inconel 600 joint
2014
Author(s) : Tuan Zaharinie Binti Tuan Zahari Source :
International Journal of Advanced Manufacturing Technology
|
| 26. |
Brazing of Inconel 600 by Active Filler Metal
2014
Source :
Materials Research Innovations
|
| 27. |
Effect of Annealing Temperature on Tensile Properties of Inconel 600
2014
Author(s) : Tuan Zaharinie Binti Tuan Zahari Source :
Australian Journal of Basic and Applied Sciences
|
| 28. |
Enhancing power output and profitability through energy-efficiency techniques and advanced materials in today's industrial gas turbines
2014
Author(s) : Tuan Zaharinie Binti Tuan Zahari Source :
International Journal of Mechanical and Materials Engineering
|
| 29. |
Kinetics of Grain Growth in 718 Ni-Base Superalloy
2014
Author(s) : Suriani Ibrahim, Tuan Zaharinie Binti Tuan Zahari Source :
Archives of Metallurgy and Materials
|
| 30. |
Vacuum brazing of sapphire with Inconel 600 using Cu/Ni porous composite interlayer for gas pressure sensor application
2014
Author(s) : Tuan Zaharinie Binti Tuan Zahari Source :
Materials & Design
|
| 31. |
Microstructure analysis of brazed sapphire to Inconel 600 using porous interlayer
2013
Author(s) : Tuan Zaharinie Binti Tuan Zahari Source :
Welding Journal
|
| 32. |
A study on interfacial reaction and titanium distribution in brazing sapphire to Inconel 600 using Cu/Ni porous composite
2012
Author(s) : Tuan Zaharinie Binti Tuan Zahari Source :
Advanced Materials Research
|
| 33. |
Effects of annealing parameters on grain-growth behavior of HAYNES -718 superalloy
2011
Author(s) : Tuan Zaharinie Binti Tuan Zahari Source :
International Journal of Physical Sciences
|
| 34. |
Temperature effects on material behavior of aerospace aluminum alloys for subsonic and supersonic aircrafts
2010
Author(s) : Tuan Zaharinie Binti Tuan Zahari Source :
Journal of Aerospace Engineering
|
| 35. |
Kinetics of grain growth in 2024-T3: An aerospace aluminum alloy
2009
Author(s) : Tuan Zaharinie Binti Tuan Zahari Source :
Journal of Alloys and Compounds
|
| 36. |
Characterization of 2024-T3: An aerospace aluminum alloy
2009
Author(s) : Tuan Zaharinie Binti Tuan Zahari Source :
Materials Chemistry and Physics
|
CHAPTER IN BOOK
| NO | DETAILS OF CHAPTER IN BOOK |
|---|---|
| 1. |
The Influence of Adding Porous Interlayer in the Brazing of Ceramic to Metal
2013
Author(s) : Tuan Zaharinie Binti Tuan Zahari |
PROCEEDING
| NO | DETAILS OF PROCEEDING |
|---|---|
| 1. |
Computer Application Software to Predict Mechanical Defect on the Built Object Produced By Laser-Based Additive Manufacturing Process
2018
Author(s) : Tuan Zaharinie Binti Tuan Zahari |
| 2. |
A Descriptive Analysis to Develop Technologies Capability Database for Rapid Tooling Application.
2018
Author(s) : Tuan Zaharinie Binti Tuan Zahari |
| 3. |
Investigation on microstructural and mechanical properties of porous copper heat sink
2018
Author(s) : Tuan Zaharinie Binti Tuan Zahari |
| 4. |
Brazing Diamond Grits to Stainless Steel using Active Filler Metal and Porous Nickel as Interlayer: Analysis on the Interface of Porous Nickel/Stainless Steel
2018
Author(s) : Tuan Zaharinie Binti Tuan Zahari |
| 5. |
Applying Technology Management Concepts in Additive Manufacturing
2017
Author(s) : Tuan Zaharinie Binti Tuan Zahari |
| 6. |
Rapid Tooling Technologies in Additive Manufacturing
2016
Author(s) : Tuan Zaharinie Binti Tuan Zahari |
| 7. |
Temperature effects on microstructures of brazing porous copper to copper using Cu-based filler metal
2016
Author(s) : Tuan Zaharinie Binti Tuan Zahari |
| 8. |
Effect of Porous Interlayer in the Brazing of Sapphire to Inconel 625
2012
Author(s) : Tuan Zaharinie Binti Tuan Zahari |
| 9. |
A Study on the Distribution of Ni and Ti during the Brazing of Sapphire with Inconel 600 by Using Cu/Ni Porous Composite
2012
Author(s) : Tuan Zaharinie Binti Tuan Zahari |
| 10. |
Effect of Vacuum Brazing Temperature to the Shear Strength of Inconel 600 Alloy using AgCuTi Filler Alloy
2012
Author(s) : Tuan Zaharinie Binti Tuan Zahari |
RESEARCH PROJECT
| GRANT | PROGRESS | STATUS |
|---|---|---|
|
Passive Radiative Cooling Of Multi-layered Nanostructured Based Emitter-reflector Metamaterial For Enhanced Heat Management
|
|
end |
|
Breathewall
|
|
end |
|
Brazing Copper To Stainless Steel With Addition Of Porous Metal Interlayer Using Cu-sn-ni-p Filler Metal For Heat Exchanger Application
|
|
end |
|
Residual Stress Analysis on the Sintered Object Produced by Direct Metal Laser Sintering
Researcher(s) : - |
|
end |
|
Investigation Of The Influence Of Various Technologies Portfolio On Rapid Tooling
Researcher(s) : Associate Prof. Ir. Dr. Mohd Sayuti Bin Ab Karim |
|
end |
|
Investigation On The Utilization Of Porous Metal And Active Filler Metal In Brazing Diamond Grits To Stainless Steel
|
|
end |
|
Brazing porous copper to copper for the potential application of cooling devices
Researcher(s) : Associate Prof. Dr. Farazila Binti Yusof |
|
end |
RESEARCH COLLABORATOR
| GRANT | PROGRESS | STATUS |
|---|---|---|
|
The Effect Of Ultrasonic Vibration Of Workpiece In Electrical Discharge Machining
|
|
end |