ARTICLE IN ACADEMIC JOURNALS
NO | DETAILS OF ARTICLE IN ACADEMIC JOURNALS |
---|---|
1. |
Essential oils-loaded electrospun biopolymers: A future perspective for active food packaging
2020
Author(s) : Aziz Bin Hassan Source : Advances in Polymer Technology |
2. |
Improved properties of coating binder from palm oil-based oleic acid by copolymerizing with acrylate monomers
2020
Author(s) : Aziz Bin Hassan Source : Journal of Coatings Technology and Research |
3. |
Conditioning effect on the mechanical and thermal properties of heat-treated oil palm empty fruit bunch/high density polyethylene composite
2020
Author(s) : Aziz Bin Hassan Source : High Performance Polymers |
4. |
Mechanical, rheological and thermal properties of montmorillonite modified polyhydroxybutyrate composites
2020
Author(s) : Aziz Bin Hassan Source : High Performance Polymers |
5. |
Role of sonication time on thermal behaviour and dynamic mechanical analysis of NiZn ferrite incorporated PLA/LNR nanocomposite
2019
Author(s) : Aziz Bin Hassan Source : Bulletin of Materials Science |
6. |
Influence of wood surface chemistry on the tensile and flexural properties of heat-treated mangrove/high-density polyethylene composites
2019
Author(s) : Rosiyah Binti Yahya,Aziz Bin Hassan Source : Polymer Bulletin |
7. |
Dynamic rheological properties of spotted mangrove/high-density polyethylene composites
2019
Author(s) : Aziz Bin Hassan,Norazilawati Binti Muhamad Sarih Source : Journal of Thermoplastic Composite Materials |
8. |
Valorization of Nutraceutical Industrial Coriander Seed Spent by the Process of Sustainable Adsorption System of Acid Black 52 from Aqueous Solution
2019
Source : International Journal of Environmental Research |
9. |
Adsorption of Acid Blue 113 from aqueous solution onto nutraceutical industrial coriander seed spent: Isotherm, kinetics, thermodynamics and modeling studies
2019
Author(s) : Aziz Bin Hassan Source : Desalination and Water Treatment |
10. |
Water absorption behavior of heat-treated and untreated red balau saw dust/LDPE composites: its kinetics and effects on mechanical properties
2019
Author(s) : Aziz Bin Hassan Source : Journal of Thermoplastic Composite Materials |
11. |
Improving thermal and mechanical properties of injection moulded kenaf fibre-reinforced polyhydroxy-butyrate composites through fibre surface treatment
2019
Author(s) : Aziz Bin Hassan Source : BioResources |
12. |
Novel chitosan derivative based composite scaffolds with enhanced angiogenesis; potential candidates for healing chronic non-healing wounds
2019
Author(s) : Aziz Bin Hassan,Adyani Azizah Binti Abd Halim Source : Journal of Materials Science: Materials in Medicine |
13. |
Optimizing treatment of oil palm-empty fruit bunch (OP-EFB) fiber: chemical, thermal and physical properties of alkalized fibers
2019
Author(s) : Aziz Bin Hassan Source : Fibers and Polymers |
14. |
A novel sustainable design to develop polypropylene and unsaturated polyester resin polymer composites from waste of major polluting industries and investigation on their physicomechanical and wear properties
2019
Author(s) : Aziz Bin Hassan Source : Polymer Composites |
15. |
Impact and thermal analysis of heat-treated and untreated mangrove wood/high-density polyethylene composites
2019
Author(s) : Aziz Bin Hassan Source : Polymer Bulletin |
16. |
Impact of water saturation on the tensile and thermal properties of heat-treated mangrove/high-density polyethylene composites
2019
Author(s) : Aziz Bin Hassan,Norazilawati Binti Muhamad Sarih Source : Journal of Thermoplastic Composite Materials DOI : 10.1177/0892705719847238 |
17. |
Oil palm waste based phthaloyl cellulose: a product of photosynthesis as an electrolyte of photovoltaics
2019
Author(s) : Aziz Bin Hassan Source : Cellulose |
18. |
Thermal and mechanical properties of injection moulded heat treated oil palm empty fruit bunch fibre reinforced high density polyethylene composites
2019
Author(s) : Aziz Bin Hassan Source : Plastics, Rubber and Composites |
19. |
Tensile properties and dynamic mechanical behaviour of natural rubber compound filled with rice husk silica produced via solvent-thermal extraction method
2019
Author(s) : Aziz Bin Hassan Source : Materials Science Forum |
20. |
The behavior of semi-rigid polyurethane film based on functionalized rubber by one-shot and two-shot method preparation
2018
Author(s) : Rosiyah Binti Yahya,Aziz Bin Hassan Source : Journal of Materials Science |
21. |
Physico-thermal properties of kenaf fiber/high-density polyethylene/maleic anhydride compatibilized composites
2018
Author(s) : Aziz Bin Hassan Source : High Performance Polymers |
22. |
Synthesis of a novel organosoluble, biocompatible and antibacterial chitosan derivative for biomedical applications
2018
Author(s) : Aziz Bin Hassan Source : Journal of Applied Polymer Science |
23. |
Characterization of sodium hydroxide-treated kenaf fibres for biodegradable composite application
2018
Source : High Performance Polymers DOI : 10.1177/0954008318784997 |
24. |
Preparation of one-shot and two-shot method of semi-rigid polyurethane film based on functionalized liquid natural rubber
2018
Author(s) : Aziz Bin Hassan Source : AIP Conference Proceedings |
25. |
The Effect of High Purity Rice Husk Silica Synthesised using Solvent-thermal Extraction Method on the Properties of Natural Rubber Compounds
2018
Author(s) : Aziz Bin Hassan Source : BioResources |
26. |
A Review on Hybrid Fillers in Rubber Composites
2018
Author(s) : Aziz Bin Hassan Source : Polymer-Plastics Technology and Engineering |
27. |
A novel application for oil palm empty fruit bunch: extraction and modification of cellulose for solid polymer electrolyte
2018
Source : Ionics |
28. |
UV-Curable Urethane Acrylate Resin from Palm Fatty Acid Distillate
2018
Author(s) : Aziz Bin Hassan,Gan Seng Neon Source : Polymers DOI : doi:10.3390/polym10121374 |
29. |
Effect of compatibiliser on the properties of polypropylene/glass fibre/nanoclay composites
2018
Author(s) : Aziz Bin Hassan,Nor Mas Mira Abd Rahman Source : Polimeros-Ciencia E Tecnologia DOI : 10.1590/0104-1428.2357 |
30. |
Synthesis of a novel organosoluble, biocompatible, and antibacterial chitosan derivative for biomedical applications
2018
Source : Journal of Applied Polymer Science DOI : 10.1002/app.45905 |
31. |
Nano-scale copper oxidation on leadframe surface
2017
Author(s) : Harith Bin Ahmad,Mohammad Faizal Bin Ismail,Muhamad Zharif Bin Samion,Muhammad Khairol Annuar Bin Zaini Source : Ionics |
32. |
Isolation and characterization of chitin nanowhiskers from fermented tiger prawn waste, Chemical Engineering Transactions, 56(2017)139-144
2017
Author(s) : Aziz Bin Hassan Source : Chemical Engineering Transactions |
33. |
Development of sustainable dye adsorption system using nutraceutical industrial fennel seed spent-studies using Congo red dye, International Journal of Phytoremediation, 19(7)(2017)686-694
2017
Author(s) : Aziz Bin Hassan Source : International Journal of Phytoremediation |
34. |
pH sensitive hydrogels in drug delivery: Brief history, properties, swelling and release mechanism, material selection and applications
2017
Author(s) : Aziz Bin Hassan Source : Polymers |
35. |
pH Sensitive Hydrogels in Drug Delivery: Brief History, Properties, Swelling, and Release Mechanism, Material Selection and Applications
2017
Author(s) : Faridah Binti Sonsudin,Rosiyah Binti Yahya,Aziz Bin Hassan,Muhammad Rizwan,Ahmad Danial Azzahari,Vidhya Selvanathan Source : Polymers DOI : 10.3390/polym9040137 |
36. |
Improving heat aging and mechanical properties of fluoroelastomer using carbon nanotubes
2017
Author(s) : Aziz Bin Hassan Source : Polish Journal of Chemical Technology |
37. |
The effect of filler on the protein content and interferences in rubber latices
2017
Author(s) : Aziz Bin Hassan Source : AIP Conference Proceedings |
38. |
Effect of compatibiliser on the properties of polypropylene/glass fibre/nanoclay composites, Polimeros-Ciencia e Tecnologia
2016
Author(s) : Aziz Bin Hassan Source : Polímeros: Ciência e Tecnologia |
39. |
Improving the thermal properties of fluoroelastomer (Viton GF-600S) using carbon nanotube, Composite Interfaces, 23(3)(2016)191-207
2016
Author(s) : Aziz Bin Hassan Source : Composite Interfaces |
40. |
Experimental analysis and theoretical modelling of the mechanical behavior of short glass fiber and short carbon fiber reinforced polycarbonate hybrid composites, Polymer Composites, 37(4)(2016)1238-1248
2016
Author(s) : Aziz Bin Hassan Source : Polymer Composites |
41. |
Electron microscopic investigation on nanostructure behaviors of thermal oxidation copper
2016
Author(s) : Rosiyah Binti Yahya,Aziz Bin Hassan Source : Key Engineering Materials |
42. |
Improving heat aging and mechanical properties of fluoroelastomer using carbon nanotubes, Polish Journal of Chemical Technology, 18(3)(2016)0050
2016
Author(s) : Aziz Bin Hassan Source : Polish Journal of Chemical Technology |
43. |
Electron microscopic investigation on nanostructure behaviours of thermal oxidation copper
2016
Author(s) : Aziz Bin Hassan Source : Key Engineering Materials |
44. |
Microstructural and thermal properties of fluoroelastomer (FE)/acidic surface modified carbon nanotube (MCNT) nanocomposites, Polymer Composites, 37(12)(2016)3341-3353
2016
Author(s) : Aziz Bin Hassan Source : Polymer Composites |
45. |
Functionalized liquid natural rubber and liquid epoxidized natural rubber: A promising green toughening agent for polyester, Journal of Applied Polymer Science, 132(3)(2015)41292. DOI: 10.1002/app.41292
2015
Author(s) : Aziz Bin Hassan Source : Journal of Applied Polymer Science |
46. |
Improving the thermal properties of fluoroelastomer (Viton GF-600S) using acidic surface modified carbon nanotube, Polimeros-Ciencia e Tecnologia, 25(4)(2015)392-401
2015
Author(s) : Aziz Bin Hassan Source : Polimeros-Ciencia e Tecnologia |
47. |
Optimizing the usability of unwanted latex yield by in situ depolymerization and functionalization, Industrial Crops and Products, 74(15)(2015)773-783
2015
Author(s) : Aziz Bin Hassan Source : Industrial Crops and Products |
48. |
Improving thermal properties of fluoroelastomer using carbon nanotubes in presence of air and under nitrogen flow, Asian Journal of Chemistry, 27(4)(2015)1235-1239
2015
Source : Asian Journal of Chemistry |
49. |
Compression and mechanical properties of directly compressible pregelatinized sago starches, Powder Technology, 269(2015)15-21
2015
Author(s) : Aziz Bin Hassan Source : Powder Technology |
50. |
Microstructural and thermal properties of fluoroelastomer/carbon nanotube composites
2014
Author(s) : Aziz Bin Hassan Source : Composites Part B: Engineering |
51. |
Improvement in the mechanical performance and interfacial behavior of kenaf fiber reinforced high density polyethylene composites by the addition of maleic anhydride grafted high density polyethylene, Journal of Polymer Research, 21(5)(2014)439
2014
Author(s) : Aziz Bin Hassan |
52. |
Improvement in the mechanical performance and interfacial behavior of kenaf fiber reinforced high density polyethylene composites by the addition of maleic anhydride grafted high density polyethylene
2014
Author(s) : Rosiyah Binti Yahya,Aziz Bin Hassan Source : Journal of Polymer Research |
53. |
Synthesis, thermal stability, optical and electrochemical properties of halogen terminated azo-benzothiazole mesogen containing smectic side chain liquid crystalline polymers, Journal of Polymer Research, 21(6)(2014)487
2014
Author(s) : Hesham Rushdey El Seedi |
54. |
Synthesis, thermal stability, optical and electrochemical properties of halogen terminated azo-benzothiazole mesogen containing smectic side chain liquid crystalline polymers
2014
Author(s) : Rosiyah Binti Yahya,Aziz Bin Hassan Source : Journal of Polymer Research |
55. |
Microstructural and thermal properties of carbon nanotube/fluoroelastomer composites, Composites, Part B: Engineering, 58(2014)166-174 (Q1)
2014
Author(s) : Aziz Bin Hassan Source : Composites, Part B: Engineering |
56. |
Effects of extrusion temperature on the rheological, dynamic mechanical and tensile properties of kenaf fiber/HDPE composites
2014
Author(s) : Rosiyah Binti Yahya,Aziz Bin Hassan Source : Composites Part B-Engineering |
57. |
Effects of extrusion temperature on the rheological, dynamic mechanical and tensile properties of kenaf fiber/HDPE composites, Composites, Part B: Engineering, 58(2014)259-266 (Q1)
2014
Author(s) : Aziz Bin Hassan Source : Composites, Part B: Engineering |
58. |
Preparation and characterisation of tungstate scheelite structured nanoparticles
2014
Author(s) : Aziz Bin Hassan Source : Materials Research Innovations |
59. |
Effect of lateral substituent on the mesomorphic behavior of schiff base ester containing side chain liquid crystalline polymers, Journal of Polymer Research, 20(2013)296 (Q2)
2013
Author(s) : Aziz Bin Hassan |
60. |
Naphthalene group containing side chain liquid crystalline polymers and their rheological behavior
2013
Source : Journal of Polymer Research |
61. |
Structural and optical characterization of metal tungstates (MWO4; M = Ni, Ba, Bi) synthesized by a sucrose-templated method, Chemistry Central Journal, 7(2013)80 (Q1)
2013
Author(s) : Aziz Bin Hassan |
62. |
Processing, microstructural, thermal and mechanical properties of glass fiber/nanoclay/polypropylene composites, Sains Malaysiana, 42(4)(2013)537-546
2013
Author(s) : Aziz Bin Hassan |
63. |
Thermal conductivity and dynamic mechanical analysis of nickel zinc ferrite nanoparticles filled thermoplastic natural rubber nanocomposite, Composites, Part B: Engineering, 52(2013)334-339 (Q1)
2013
Author(s) : Aziz Bin Hassan |
64. |
Synthesis and characterisation of biodegradable multiblock copolymers of L-lactide, ε-caprolactone and poly(ethylene glycol), Scientia Iranica, Transactions C: Chemistry and Chemical Engineering, 20(6)(2013) 1839-1847
2013
Author(s) : Aziz Bin Hassan Source : Scientia Iranica, Transactions C: Chemistry and Chemical Engineering |
65. |
Synthesis and characterization of azo benzothiazole chromophore based liquid crystal macromers: Effects of substituents on benzothiazole ring and terminal group on mesomorphic, thermal and optical properties, Materials Chemistry and Physics, 140(2013)543-552 (Q1)
2013
Author(s) : Aziz Bin Hassan |
66. |
Thermal, optical and electrochemical study of side chain liquid crystalline polymers bearing azo-benzothiazole chromophore in the mesogen, Journal of Polymer Research, 20(2013)259 (Q2)
2013
Author(s) : Aziz Bin Hassan |
67. |
Impact properties of glass-fiber/polypropylene composites: the influence of fiber loading, specimen geometry and test temperature, Fibers and Polymers, 14(11)(2013)1877-1885 (Q2)
2013
Author(s) : Aziz Bin Hassan |
68. |
Naphthalene group containing side chain liquid crystalline polymers and their rheological behavior, Journal of Polymer Research, 20(2013)131 (Q2)
2013
Author(s) : Aziz Bin Hassan |
69. |
Reactivity ratio determination of newly synthesized copolymers from glycidyl methacrylate and tetrahydrofurfuryl acrylate, Sains Malaysiana, 42(4)(2013)509-514
2013
Author(s) : Aziz Bin Hassan |
70. |
Thermal and mechanical properties of treated and untreated Red Balau (Shorea Dipterocarpaceae)/LDPE composites, Journal of Reinforced Plastics and Composites, 31(2012)215-224
2012
Author(s) : Aziz Bin Hassan |
71. |
Polypropylene/glass fiber/nanoclay hybrid composites: morphological, thermal, dynamic mechanical and impact behaviors, Journal of Reinforced Plastics and Composites, 31(2012)1247- 1257
2012
Author(s) : Aziz Bin Hassan |
72. |
Moisture absorption effect on thermal, dynamic mechanical and mechanical properties of injection-molded short glass-fiber/polyamide 6,6 composites, Fibers and Polymers, 13(7)(2012)899-906
2012
Author(s) : Aziz Bin Hassan |
73. |
Study of thermal decomposition kinetics of palm oleic acid-based alkyds and effect of oil length on thermal stability, Journal of Polymers and the Environment, 20(2)(2012)507-513
2012
Author(s) : Aziz Bin Hassan |
74. |
Micro-structural, thermal and mechanical properties of injection moulded glass-fiber/nanoclay/polypropylene composites, Journal of Reinforced Plastics and Composites, 31(4)(2012)269-281
2012
Author(s) : Aziz Bin Hassan |
75. |
Synthesis and characterization of new copolymers from glycidyl methacrylate and tetrahydrofurfuryl acrylate: Determination of reactivity ratios, Fibers and Polymers, 13(5)(2012)555-563
2012
Author(s) : Aziz Bin Hassan |
76. |
Fibre length, thermal, mechanical and dynamic mechanical properties of injection-moulded glass- fibre/polyamide 6,6: Plasticisation effect
2011
Source : Journal of Reinforced Plastics and Composites |
77. |
Effect of acid modification on dyeing properties of rajshahi silk fabric with different dye classes, Fibers and Polymers, 12(5)(2011)642-647
2011
Author(s) : Aziz Bin Hassan |
78. |
Fibre length, thermal, mechanical and dynamic mechanical properties of injection-moulded glass-fibre/polyamide 6,6: Plasticisation effect
2011
Author(s) : Aziz Bin Hassan Source : Journal of Reinforced Plastics and Composites |
79. |
Plasticisation effect on thermal, dynamic
mechanical and tensile properties of injection-
moulded glass-fibre/polyamide 6,6, Journal of
Science and Technology, 3(1)(2011)47-66
2011
Author(s) : Aziz Bin Hassan |
80. |
Extrusion and injection-molding of glass- fiber/MAPP/polypropylene: Effect of coupling agent on DSC, DMA and mechanical properties, Journal of Reinforced Plastics and Composites, 30 (14)(2011)1223-1232
2011
Author(s) : Aziz Bin Hassan |
81. |
Thermal and tensile properties of treated and
untreated Red Balau (Shorea Dipterocarpaceae)
filled LDPE composites, Journal of Science and
Technology, 3(2)(2011)17-28
2011
Author(s) : Aziz Bin Hassan |
82. |
Reactions between epoxidized natural rubber and
palm oil-based alkyds at ambient temperature,
Journal of Applied Polymer Science, 120(3)(2011)
1503-1509
2011
Author(s) : Aziz Bin Hassan |
83. |
Impact properties of injection moulded glass fibre/polyamide 6,6 composites: Effect of testing parameters, Journal of Reinforced Plastics and Composites, 30(10)(2011)889-898
2011
Author(s) : Aziz Bin Hassan |
84. |
Interfacial shear strength and tensile properties of injection-molded, short- and long-glass fiber reinforced polyamide 6,6; Journal of Reinforced Plastics and Composites, 30(14)(2011)1233-1242
2011
Author(s) : Aziz Bin Hassan |
85. |
Fibre length, thermal, mechanical and dynamic mechanical properties of injection-moulded glass- fibre/polyamide 6,6: Plasticisation effect, Journal of Reinforced Plastics and Composites, 30 (6)(2011)488-498
2011
Author(s) : Aziz Bin Hassan |
86. |
Preparation and characterisation of tungstate scheelite structured nanoparticles, Materials Research Innovations, 15(S2)(2011)97-100
2011
Author(s) : Aziz Bin Hassan |
87. |
Reactions of palm oil-based mcl-PHAs with
epoxidized natural rubber, Journal of Applied
Polymer Science, 115(4)(2010)2039-2043
2010
Author(s) : Aziz Bin Hassan |
88. |
Reactions of palm oil-based mcl-PHAs with
epoxidized
natural rubber
2009
Author(s) : Aziz Bin Hassan,Gan Seng Neon,Irene Tan Kit Ping,Lee Siang Yin,Katsuni Terakawa,Naoya Ichikawa |
89. |
Modifications of natural rubber and epoxidised
natural rubber compounds by palm oil-based
alkyds, Malaysian Rubber Technology Developments,
9(1)(2009)11-14
2009
Author(s) : Aziz Bin Hassan |
90. |
Delamination and void analysis on die attach epoxy of
a QFN package, Solid State Science and Technology, 16
(2)(2008)207-213
2008
Author(s) : Aziz Bin Hassan |
91. |
Synthesis and characterization of random
biodegradable copolymers of L-Lactide, Glycolide
and Trimethylene carbonate, Iranian Polymer
Journal, 16(7)(2007)489-494
2007
Author(s) : Aziz Bin Hassan |
92. |
The influence of temperature and reaction time in
the degradation of natural rubber latex, The
Malaysian Journal of Analytical Sciences, 11(1)
(2007)42-47
2007
Author(s) : Aziz Bin Hassan |
93. |
Special cement system and cementing techniques
improve zonal isolation in South Oman fields,
Proceeding of SPE Annual Technical Conference and
Exhibition, San Antonio, Texas, 3(2006)1920-1931
2006
Author(s) : Aziz Bin Hassan |
94. |
A new cementing approach to improve and provide
long-term zonal isolation, Proceedings of SPE
Asia Pacific Oil and Gas Conference and
Exhibition 2006: Thriving on Volatility, 1(2006)
52-65
2006
Author(s) : Aziz Bin Hassan |
95. |
Structural studies of potassium hexatitanates
prepared under hydrothermal and solid state
conditions, Functional Materials and Devices, 517
(2006)222-226
2006
Author(s) : Aziz Bin Hassan |
96. |
Gamma rays vulcanization of dried film natural
rubber latex: effect of different radiation doses
and sensitizers on its tensile property, Jurnal
Sains, 12(1&2)(2004)26-31
2004
Author(s) : Aziz Bin Hassan |
97. |
Hydrogen production from methanol using potassium
hexatitanate promoted ruthenium oxide catalysts,
International Journal of Chemical Sciences, 2(4)
(2004)519-526
2004
Author(s) : Aziz Bin Hassan |
98. |
Tensile, impact and fiber length properties of
injection molded, short and long glass fiber
composites, Journal of Reinforced Plastics and
Composites, 23(9)(2004)969-986, DOI:
10.1177/0731684404033960
2004
Author(s) : Aziz Bin Hassan Source : Journal of Reinforced Plastics and Composites |
99. |
Extrusion- and pultrusion-compounded carbon fibre
reinforced polyamide 6,6 composites: Impact
properties of injection moulded specimens,
Malaysian Journal of Science, 23(2003)105-110
2003
Author(s) : Aziz Bin Hassan |
100. |
Structure-property relationship of injection
moulded carbon fibre reinforced polyamide 6,6
composites: The effect of compounding routes,
Polymer Testing, 22(2)(2003)185-189; DOI:
10.1016/S0142-9418(02)00068-5
2003
Author(s) : Aziz Bin Hassan |
101. |
Short- and long-glass fibre reinforced polyamide
6,6 composites: Tensile properties of injection
moulded specimens, Malaysian Journal of Science,
20(2001)51-55
2001
Author(s) : Aziz Bin Hassan |
102. |
The effect of impeller design on the mixing of
non-newtonian internal tyre lubricant, Journal of
Industrial Technology, 10(1)(2001)105-113
2001
Author(s) : Aziz Bin Hassan |
103. |
The properties of injection molded, short and
long carbon fiber reinforced polyamide 6,6
composites, SPE ANTEC, 59(2)(2001)2017-2021
2001
Author(s) : Aziz Bin Hassan Source : SPE ANTEC |
104. |
Short- and long-glass fibre reinforced polyamide
6,6 composites: Fibre length characteristics of
injection moulded specimens, Malaysian Journal of
Science, 20(2001)57-63
2001
Author(s) : Aziz Bin Hassan |
105. |
Interactions and partitioning of
diluents/plasticizers in hydroxypropyl
methylcellulose and poly(vinyl alcohol)
homopolymers and blends. Part III: Polyethylene
glycol 400, Colloid and Polymer Science, 272(2)
(1994)220-227
1994
Author(s) : Aziz Bin Hassan |
106. |
Interactions and partitioning of
diluents/plasticizers in hydroxypropyl
methylcellulose and poly(vinyl alcohol)
homopolymers and blends. Part II: Glycerol,
Colloid and Polymer Science, 272(1)(1994)48-56
1994
Author(s) : Aziz Bin Hassan |
107. |
Plasticization and interactions of polyethylene
glycol 6000 with hydroxypropyl methyl
cellulose/polyvinyl alcohol blends, International
Journal of Pharmaceutics, 102(1-3)(1994)207-211
1994
Author(s) : Aziz Bin Hassan |
108. |
Interactions and partitioning of
diluents/plasticizers in hydroxypropyl methyl
cellulose and poly(vinyl alcohol) homopolymers
and blends. Part I: Diethylene glycol, Colloid
and Polymer Science, 271(11)(1993)1083-1090
1993
Author(s) : Aziz Bin Hassan |
109. |
Plasticization of aqueous poly(vinyl alcohol) and
hydroxypropylmethyl cellulose with polyethylene
glycols and glycerol, European Polymer Journal, 29
(7)(1993)937-943
1993
Author(s) : Aziz Bin Hassan |
110. |
Phase separation and polymer interactions in
aqueous poly(vinyl alcohol)/hydroxypropyl
methylcellulose blends, Polymer, 34(6)(1993)1240-
1248
1993
Author(s) : Aziz Bin Hassan Source : Polymer |
PROCEEDING
NO | DETAILS OF PROCEEDING |
---|---|
1. |
Extrusion and injection-molding of glass-
fiber/MAPP/polypropylene: Effect of coupling
agent on
DSC, DMA and mechanical properties
2012
Author(s) : Aziz Bin Hassan |
2. |
Glass fiber and nanoclay reinforced polypropylene
composites: A study of the morphological, thermal and
dynamic mechanical behaviors
2012
Author(s) : Aziz Bin Hassan |
3. |
Effects of MAPE content on the mechanical properties
of Red Balau (Shorea Dipterocarpaceae)/LDPE composites
2012
Author(s) : Aziz Bin Hassan |
4. |
Thermal and mechanical properties of injection moulded
aramid/carbon hybrid fibres reinforced polypropylene
composites
2012
Author(s) : Aziz Bin Hassan |
5. |
Effects of extrusion parameters on the dynamic
mechanical properties of kenaf fibre/HDPE composites
2012
Author(s) : Aziz Bin Hassan |
6. |
Processing, micro-structural, thermal and mechanical
properties of glass fiber/nanoclay/polypropylene
composites
2011
Author(s) : Aziz Bin Hassan,Nor Mas Mira Abd Rahman |
7. |
Conditioning effect on thermal and impact properties
of injection moulded glass fibre/polyamide 6,6
composites
2011
Author(s) : Aziz Bin Hassan |
8. |
Rheological properties of extruded kenaf fibre/High
density polyethylene composites
2011
Author(s) : Aziz Bin Hassan |
9. |
Water absorption effect on the mechanical properties
of heat treated red balau saw dust/LDPE composites
2011
Author(s) : Aziz Bin Hassan |
10. |
Improving thermal properties of Viton GF-600S with
Advanced Polymer Architecture (APA) using carbon
nanotube
2011
Author(s) : Aziz Bin Hassan |
11. |
Thermal and tensile properties of treated and
untreated Red Balau (Shorea Dipterocarpaceae)/LDPE
composites
2010
Author(s) : Aziz Bin Hassan |
12. |
Water Plasticisation Effects on Thermal and Tensile
Properties of Glass Fiber/Polyamide 6,6 Composites
2010
Author(s) : Aziz Bin Hassan,Nor Mas Mira Abd Rahman |
13. |
Special Cement System And Cementing Techniques Improve
Zonal Isolation In South Oman Fields
2006
Author(s) : Aziz Bin Hassan |
14. |
A New Cementing Approach to Improve and Provide Long-
Term Zonal Isolation
2006
Author(s) : Aziz Bin Hassan |
15. |
The properties of injection moulded glass fibre
reinforced polyamide 6,6 compsoites
2001
Author(s) : Aziz Bin Hassan |
RESEARCH COLLABORATOR
GRANT | PROGRESS | STATUS |
---|---|---|
Mesomophic Properties of Liquid Crystal Macromers and their Polymerization by Atom Transfer Radical Polymerization.
Researcher(s) : Dr. Rosiyah Binti Yahya,Prof. Dr. Aziz Bin Hassan
(Geran Penyelidikan Universiti Malaya (UMRG) - AFR (Frontier Science)) |
|
end |
Development of New Organic Dye for Efficient Dye-Sensitized Solar Cells (DSCs) with long-term Durability
Researcher(s) : Prof. Dr. Zanariah Binti Abdullah,Prof. Dr. Aziz Bin Hassan
(Geran Penyelidikan Universiti Malaya (UMRG) - AFR (Frontier Science)) |
|
end |