Curriculum Vitae

DR. ZHOU DING

Lecturer
  • Department of Mechanical Engineering
    Faculty of Engineering
  • zhouding
  • 0379677668

BIOGRAPHY

Dr. Zhou Ding received his bachelor’s degree in mechanical engineering and automation from Wuyi University, China in 2013, and his master’s degree in mechanical engineering science from the University of Malaya, Kuala Lumpur, Malaysia, where he continued to obtain the Ph.D. degree in mechanical engineering 

His research interests are in the analysis of electronic packaging reliability, renewable energy, finite element simulation of materials, and electrospinning. He has authored several SCI indexed papers in his areas of research and works continuously on many industrial projects.

 

AREAS OF EXPERTISE

  • DESIGN RELIABILITY AND OPTIMIZATION IN MECHANICAL ENGINEERING
    Engineering, Mechanical Engineering, Mechanical Engineering Design
  • BIOMASS ENERGY TECHNOLOGY (INCLUDING BIOGAS AND BIOFUEL)
    Engineering, Energy Resources And Engineering, Renewable Energy Resources
  • MEMBRANES
    Applied Science And Technology, Material Sciences And Technology Including Engineering Materials, Polymer And Polymeric Materials
  • ELECTRONIC PACKAGING MATERIALS
    Applied Science And Technology, Material Sciences And Technology Including Engineering Materials, Electronics And Photonics Materials

ACADEMIC QUALIFICATION

  • B.Eng(Wuyi)(2013), (KEJURUTERAAN MEKANIKAL DAN AUTOMOTIF)
    Wuyi University
  • PhD (MechEng)(UM)(2023), (MATERIALS ENGINEERING)
    Universiti Malaya (um)
  • M.EngSc (UM)(2018), (KEJURUTERAAN SAINS)
    Universiti Malaya (um)

ADMINISTRATIVE DUTIES

  • Coordinator
    01 Oct 2024 - 31 Dec 2026 (Faculty)

MEMBERSHIPS

  • CORE MEMBER OF CENTRE OF ADVANCED MATERIALS, MEMBER
    Since 2024 (University)

PUBLICATIONS

Article in Journal
WoS
  1. Adnan; Bani-Fwaz, Mutasem Z.; Zhou, Ding; Bashir, Muhammad Nasir; Ali, Muhammad Mahmood; Khan, Yasir; Tlili, Iskander; Ben Hamida, Mohamed Bechir (2025). AI neural networking (LMBPS) driven investigation of radiated nanofluids (SiO2/H2O, Al2O3/H2O) under mixed convection, JOURNAL OF RADIATION RESEARCH AND APPLIED SCIENCES. 18(3). doi:10.1016/j.jrras.2025.101728
  2. Bashir, Muhammad Nasir; Lee, Joon Sang; Bou-Rabee, Mohammed A.; Mohamed, Heba G.; Zhou, Ding; Badruddin, Irfan Anjum; Fazal, M. A.; Masood, Zafar (2025). Investigation of process parameter influence on the mechanical properties of FDM-printed PEEK-carbon fiber composites using RSM and Taguchi methods, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T. 36, 10199-10209. doi:10.1016/j.jmrt.2025.05.217
  3. Bhutto, Aqeel Ahmed; Bin Wahab, Saidin; Solangi, Faheem Ahmed; Hussain, Fayaz; Zhou, Ding; Khan, T. M. Yunus; Shaik, Abdul Saddique (2025). Microstructure, mechanical and physical characteristics analysis of ADC14 hypereutectic AlSi composite reinforced with Al2O3, ALEXANDRIA ENGINEERING JOURNAL. 126, 303-319. doi:10.1016/j.aej.2025.04.072
  4. Ou, Weicheng; Wang, Han; Liu, Maolin; Wang, Zhuozhen; Huang, Weimin; Cai, Nian; Zhang, Jie; He, Jingfan; Zhu, Zihui; Zhou, Ding (2025). Exploring the Influence of Collector Acceleration on Deposition in Melt Electrospinning Writing, 3D PRINTING AND ADDITIVE MANUFACTURING. . doi:10.1089/3dp.2024.0050
  5. Ou, Weicheng; Zhou, Ding; Lu, Zehui; Wang, Han; Huang, Weimin; Liu, Maolin; Cai, Nian; Raja, Sufian (2025). Simulation and experimental investigation of micro-nano piezoelectric-electrohydrodynamic hybrid printing, JOURNAL OF MICROMECHANICS AND MICROENGINEERING. 35(5). doi:10.1088/1361-6439/adcbb4
  6. Wu, Guodong; Shen, Jingfang; Muhammad, Khairi Faiz; Zhou, Ding; Wong, Yew Hoong; Si, Zhixiang (2025). Microstructure and mechanical properties of Cu/In-Zn-Sn-Bi/Cu joints bonded with high-entropy alloy solder at ultra-low temperature, JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS. 36(16). doi:10.1007/s10854-025-14903-y
  7. Wu, Guodong; Shen, Jingfang; Zhou, Ding; Faiz, Muhammad Khairi; Wong, Yew Hoong (2025). Applications and Recent Advances of Low-Temperature Multicomponent Solders in Electronic Packaging: A Review, MICROMACHINES. 16(3). doi:10.3390/mi16030300
  8. Xu, Yi-Han; Ding, Rong-Xing; Xu, Xiao-Ren; Zhou, Ding; Zhou, Wen (2025). A DDPG Hybrid With Graph Scheme for Resource Management in Digital Twin-Assisted Biomedical Cyber-Physical Systems, IEEE TRANSACTIONS ON NETWORK AND SERVICE MANAGEMENT. 22(4), 2956-2970. doi:10.1109/TNSM.2025.3570252
  9. Zhou, D.; Haseeb, A. S. M. A.; Andriyana, A. (2022). Mechanical performance of advanced multicomponent lead-free solder alloy under thermal aging, MATERIALS TODAY COMMUNICATIONS. 33. doi:10.1016/j.mtcomm.2022.104430
ESCI
  1. Ding, Rong-Xing; Xu, Yi-Han; Yu, Gang; Zhou, Wen; Zhou, Ding (2025). Swin Transformer With Spatial and Local Context Augmentation for Enhanced Semantic Segmentation of Remote Sensing Images, IEEE OPEN JOURNAL OF SIGNAL PROCESSING. 6, 608-620. doi:10.1109/OJSP.2025.3573202
  2. Solangi, Faheem Ahmed; Noonari, Altaf Alam; Hussain, Fayaz; Ding, Zhou; Zhang, Bo; Razzaq, Luqman (2025). Study of deposit accumulation and tribological degradation in diesel engine utilizing blend fuels, ENERGY CONVERSION AND MANAGEMENT-X. 26. doi:10.1016/j.ecmx.2025.100999
  3. Wakeel, Saif; Bingol, Sedat; Ahmad, Shafi; Bashir, M. Nasir; Emamat, Mir Seyed Mohammad Mohsen; Ding, Zhou; Fayaz, H. (2021). A New Hybrid LGPMBWM-PIV Method for Automotive Material Selection, INFORMATICA-AN INTERNATIONAL JOURNAL OF COMPUTING AND INFORMATICS. 45(1), 105-115. doi:10.31449/inf.v45i1.3246
Scopus
  1. Adnan, Sarfraz G., Khan S.U., Mohamed H.G., Bashir M.N., Zhou D., Badruddin I.A., Khan Y., Hamida M.B.B. (2025). Nanoparticles diameter based thermal conductivity aspects for thermal application in nanofluid flow through Riga device associated to solar radiations and convective heating, ZAMM Zeitschrift Fur Angewandte Mathematik Und Mechanik. 105(10). doi:10.1002/zamm.70240
  2. Ding R.-X., Xu Y.-H., Yu G., Zhou W., Zhou D. (2025). Swin Transformer with Spatial and Local Context Augmentation for Enhanced Semantic Segmentation of Remote Sensing Images, IEEE Open Journal of Signal Processing. . doi:10.1109/OJSP.2025.3573202
  3. Ou W., Wang H., Liu M., Wang Z., Huang W., Cai N., Zhang J., He J., Zhu Z., Zhou D. (2025). Exploring the Influence of Collector Acceleration on Deposition in Melt Electrospinning Writing, 3D Printing and Additive Manufacturing. . doi:10.1089/3dp.2024.0050
  4. Ou W., Zhou D., Lu Z., Wang H., Huang W., Liu M., Cai N., Raja S. (2025). Simulation and experimental investigation of micro-nano piezoelectric-electrohydrodynamic hybrid printing, Journal of Micromechanics and Microengineering. 35(5). doi:10.1088/1361-6439/adcbb4
  5. Wu G., Shen J., Muhammad K.F., Zhou D., Wong Y.H., Si Z. (2025). Microstructure and mechanical properties of Cu/In Zn Sn Bi/Cu joints bonded with high-entropy alloy solder at ultra-low temperature, Journal of Materials Science Materials in Electronics. 36(16). doi:10.1007/s10854-025-14903-y
  6. Wu G., Shen J., Zhou D., Khairi Faiz M., Wong Y.H. (2025). Applications and Recent Advances of Low-Temperature Multicomponent Solders in Electronic Packaging: A Review, Micromachines. 16(3). doi:10.3390/mi16030300
  7. Ye N., Xu Y.-H., Zhou W., Yu G., Zhou D. (2025). MKF-NET: KAN-Enhanced Vision Transformer for Remote Sensing Image Segmentation, Applied Sciences Switzerland. 15(20). doi:10.3390/app152010905

RESEARCH PROJECT

National
  1. 2025 - 2028, University Grant Research Program - Research Cluster
    Development and Application of Nanospun Membranes for Epidermal Cell Repair ( Co-Researcher)
Private
  1. 2024 - 2027, Private Funding
    Recovery Of Rare Earth Elements From Electronic Waste ( Co-Researcher)
University
  1. 2025 - 2027, Universiti Malaya Translational Research Grant (UM TRG)
    A Rapid Response Solution to Chloride-Induced SCC in Stainless Steel for the Petrochemical Industry ( Co-Researcher)
  2. 2024 - 2026, Bantuan Khas Penyelidikan (BKP Special)
    Optimizing Biodiesel Production and Engine Performance Using Waste Cooking Oil: A Study with Response Surface Methodology and Artificial Neural Networks ( Principal Investigator(PI))

CONSULTANCY PROJECT

  • Identifying The Potential Root Cause of The Failure Outlined in Report Dpr Through Close Visual Inspection of The Gas Lift Line Following The Application of Aerolon Coating, Pluperfect Technology Sdn. Bhd.
    10 Apr 2025 - 31 May 2025 (National)
  • Appointment as Malaysia Advisors for Association Visit (28 July 31 July 2025), Guangdong Semiconductors Equipment and Components Society
    28 Jul 2025 - 31 Jul 2025 (International)
  • Energy Dispersive X-ray (edx) Analysis for Cs Astm A106 Pipe 3 and 4, TUV NORD Engineering Services (M) Sdn Bhd
    11 Oct 2024 - 25 Oct 2024 (National)

PAPER PRESENTED

INVITED SPEAKER
  1. Mechanical and Microstructural Performance of Multicomponent Lead-free Solder, 2025 ANNUAL ACADEMIC CONFERENCE, Guangdong Semiconductor Equipment and Components Society (International) (13 Nov 2025 - 15 Nov 2025)
ORAL PRESENTER
  1. The Effect of Polymer Concentration on the Oil/Water Separation Performance of Electrospun Nanofiber Membranes, 2025 6th International ConferenceonMaterial Chemistry and Composite Materials (MCCM2025), Guangdong University of Technology (International) (12 Dec 2025 - 14 Dec 2025)

SUPERVISION

Postgraduate Student
PhD/ Doctoral
  1. (2025) IN-SN-BI-ZN-X PREPARATION OF HIGH-ENTROPY COMPOSITE LOW-TEMPERATURE PACKAGING SOLDER AND 3D PACKAGING SOLDER JOINT METAL COMPOUND CONTROL AND PERFORMANCE ENHANCEMENT, WU GUODONG
  2. (2025) THREE-LAYER ELECTROSPUN NANOFIBER DRESSING: CONTROLLED-RELEASE ANTIMICROBIAL DESIGN FOR PROMOTING EPIDERMAL WOUND HEALING AND REDUCING SCARRING, ZHEN RUI
  3. (2022) Research on the Key Technologies of Tricolor Quantum Dot Grating Linear Displacement Sensor, Ou Weicheng (Guangdong University of Technology)
Master
  1. (2025) EXPERIMENTAL INVESTIGATION OF DIFFERENT TECHNIQUES TO OPTIMIZE YIELD AND PERFORMANCE AND EMISSION CHARACTERISTICS USING BIODIESEL SOURCED FROM WASTE COOKING OIL, ABDUL REHMAN
  2. (2022) Optimization of needle-less electrostatic spinning process for Wide-Width Nanofiber Filters, Chen Xiaojie (Guangdong University of Technology)

TEACHING

Full-Time Equivalent (FTE)
  1. (2026) KIG1012 - Engineering Design and Modelling
  2. (2026) KIG3007 - Integrated Design 1
  3. (2026) KIG4054 - Final Year Project 1
  4. (2026) KIX2001 - Integrated Design I