PERSONAL DETAIL


Professor Ir. Dr. Mohd Zamin Bin Jumaat

Department of Civil Engineering
Faculty of Engineering
 
  +603-79675203
  +603-79675318
  zamin@um.edu.my
  Department of Civil Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, MALAYSIA
 
ResearcherID Link
  http://www.researcherid.com/rid/B-9138-2010


BIBLIOMETRIC DATA


 Total Articles in Publication List  267
 Articles With Citation Data  199
 Sum of the Times Cited   2887
 Average Citations per Article   14.51
 h-index   30
 Co-authors   Collaboration Network
 This information is generated from http://researcherid.com

BIOGRAPHY


Mohd. Zamin Bin Jumaat is currently working as a professor and head of Civil Engineering Department, Faculty of Engineering, University of Malaya. His obtained a PhD on structural engineering from University of Southampton, UK.

In addition to his post as head of department, Mohd. Zamin is also a council and corporate member of the Institution of Engineers Malaysia (IEM), a professional engineer with the Board of Engineers Malaysia (BEM), the head of the Universiti Malaya Research Centre for Innovative Construction Technology, and the co-opted committee member of the Civil and Structural Division of the Institution of Engineers Malaysia. 

Mohd. Zamin's research interests are in the area of analysis and design of structures, instrumentations and structural investigations, repair and strengthening.


ACADEMIC QUALIFICATION
(Qualification), (Institution).



PROFESSIONAL
(Organisation), (Role), (Year), (Level).


  • Institute of Engineers, Member, 1990, (National)
  • Board of Engineers, Malaysia, Professional Engineer, 1992, (National)
  • Institution of Engineers Position Paper on the Prevention of Collapse of Scaffolding and False Works, Chairman Of The Working Committee, 1992 to 1995, (National)
  • Civil and Structural Division, Institution of Engineers, Malaysia, Committee Member, 1995, (National)
  • University Malaya Research Centre for Innovative Construction Technology., Head, 2000, (National)
  • 7th World Conferrence on Timber Engineering, WCTE 2002, Committee Member, 2002, (National)
  • CIDB Technical Committee on Timber Structures TC4, Committee Member, 2003, (National)
  • CIDB Working Committees on the Drafting of Malaysian Standard, Chairman, 2003, (National)
  • Department of Civil Engineering, University of Malaya, Professor And Head, 2007, (National)
  • Institution of Engineers, Malaysia, Council Member, 2008, (National)
  • Lembaga Jurutera Malaysia, Board Member, 2014 to 2015, (National)
  • The Institution of Engineers, Malaysia, Co-opted Member, 2015, (National)

ADMINISTRATIVE DUTIES
(Role), (Level), (Start date),(End Date).


  • Deputy Dean, Centre for Innovative Construction Technology (Cict), Faculty of Engineering, 01/01/2015 to 31/12/2015
  • Head of Department, Department of Civil Engineering, Faculty of Engineering, 01/07/2014 to 31/07/2016
  • Head, Centre for Innovative Construction Technology (Cict), Faculty of Engineering, 02/01/2014 to 31/12/2014
  • Head of Department, Department of Civil Engineering, Faculty of Engineering, 01/07/2011 to 30/06/2014
  • Deputy Dean, Centre for Innovative Construction Technology (Cict), Faculty of Engineering, 01/09/2009 to 30/06/2011
  • Head of Department, Department of Civil Engineering, Faculty of Engineering, 01/09/2007 to 31/08/2009
  • Head of Department, Department of Civil Engineering, Faculty of Engineering, 01/09/2006 to 31/08/2007
  • Head of Department, Department of Civil Engineering, Faculty of Engineering, 01/06/2006 to 31/08/2006
  • Head of Department, Department of Civil Engineering, Faculty of Engineering, 01/04/2006 to 31/05/2006
  • Deputy Dean, Department of Civil Engineering, Faculty of Engineering, 01/09/1999 to 31/08/2001
  • Head of Housing Project, Joint-Venture between Universiti Malaya and Forest Research Institute of Malaysia , University Malaya,  
  • University Representative, SIRIM/CIDB/MTIB Technical Committee on Timber and Timber Products, University Malaya,  
  • Committee Member, Higher Degree Committee, Faculty,  
  • Chairman, Undergraduate Studies Committe, Faculty,  
  • Deputy Dean, Faculty,  
  • Head of Sub Committee, Postgraduate and Research , Faculty,  
  • Director, Centre for Innovative Construction Industry, Faculty,  
  • Advanced Engineering and Technology (AET) Research Cluster Panel member, University Malaya, 01/01/2013 to 31/12/2014
  • Senate member, University Malaya, 17/12/2012 to 31/12/2015
  • Head of Department, Faculty, 01/07/2011 to 30/06/2014
  • Head of Department, Faculty, 01/09/2006 to 31/08/2007

AREAS OF EXPERTISE
(Area).


  • Structural Materials (Reinforced Concrete, Steel and Timber) (material)
  • Structural Engineering (structures)


RECENT SELECTED PUBLICATIONS
(Publication).


Book

2011
  • Islam, A.B.M.S., Jameel, M., Jumaat M.Z. (2011) Boring, Sampling and Field Testing in Soil Investigation. VDM Publishing House Ltd. ISBN-13: 9783639336993. 
  • Md. Ashraful Alam and Mohd Zamin Jumaat (2011) STRENGTHENING OF R.C. BEAMS USING EXTERNALLY BONDED PLATES AND ANCHORS. VDM publishing, ISBN 978-3-639-29630-3 

2004
  • M.Z. Jumaat and A.H.A. Rahim (2004), \"The Development of the Malaysian Codes of Practice for the Structural Use of Timber with Emphasis on Timber Joints,\" Progress in Structural Engineering, Mechanics and Computation, Taylor & Francis Group, London, ISBN 90 5809 568 1, 2004, Pp.1251-1255. 

2001
  • M.Z. Jumaat Et Al (2001), \"Glued Laminated Timber - Performance Requirements And Minimum Production Requirements (First Revision), Malaysian Standard MS 758:2001\", Department of Standards, Malaysia. 
  • M.Z. Jumaat Et Al (2001), \"Code of Practice for Structural Use of Timber: Part 7: Testing (First Revision), Malaysian Standard MS544:Part 7:2001\", Department of Standards, Malaysia. 
  • M.Z. Jumaat Et Al (2001), \"Code of Practice for Structural Use of Timber: Part 6: Workmanship, Inspection and Maintenance (First Revision), Malaysian Standard MS544: Part 6::2001\", Department of Standards, Malaysia. 
  • M.Z. Jumaat Et Al (2001), \"Code of Practice for Structural Use Of Timber: Part 11: Recommended Span Tables and their Calculations: Section 3: Ceiling Binders, Malaysian Standar MS544:Part 11: Section 2:2001,\" Department of Standars, Malaysia, 2001. 
  • M.Z. Jumaat Et Al (2001), \"Code of Practice for Structural Use of Timber: Part 5: Timber Joints, Malaysian Standard MS544: Part 5:2001\", Department of Standards, Malaysia. 
  • M.Z. Jumaat Et Al (2001), \"Code of Practice for Structural Use of Timber: Part 11: Recommended Span Tables and their Calculations: Section 1: Domestic Floor Joists, Malaysian Standard MS544: Part 11: Section 1:2001\", Department Of Standards, Malaysia. 
  • M.Z. Jumaat Et Al (2001), \"Code of Practice for Structural Use of Timber: Part 11: Recommended Span Tables and Tteir Calculations: Section 2: Ceiling Joists, Malaysian Standard MS544: Part 11: Section 2:2001\", Department Of Standards, Malaysia. 
  • M.Z. Jumaat Et Al (2001), \"Code of Practice for Structural Use of Timber: Part 1: General, Malaysian Standard, Part 1:2001\", Department of Standards, Malaysia. 
  • M.Z. Jumaat Et Al (2001), \"Code of Practice for Structural Use of Timber: Part 2: Permissible Stress Design of Solid Timber, Malaysian Standard Ms544: Part 2:2001\", Department of Standards, Malaysia. 
  • M.Z. Jumaat Et Al (2001), \"Code of Practice for Structural Use of Timber: Part 3: Permissible Stress Design of Glued Laminated Timber, Malaysian Standard MS544: Part 3:2001\", Department of Standards, Malaysia. 

1992
  • M.Z. Jumaat (1992), \"Pengenalan Mekanik Bahan Dewan Bahasa Dan Pustaka\", Kuala Lumpur, 1992. 

1989
  • M.Z. Jumaat (1989), \"Keperluan Buku Teks Dan Rujukan Di Dalam Bahasa Malaysia Di Dalam Pendidikan Jurutera,\" Bab 1v, Bahasa Malaysia Dalam Amalan Dan Pendidikan Kejuruteraan, Jabatan Penerbitan, University Malaya, 1989, Pp.93-100. 
Chapter in Book

2011
  • A B M Saiful Islam, Mohammed Jameel, Mohd Zamin Jumaat, M A Salam (2011) Energy Resources at Malaysian Sedimentary Basins and Spar Platform as Deep Sea Structure Edited by:Garry Lee. ASME Press, New York. isbn:9780791859810 
Article in Academic Journals

2018
  • Mo, K. H., Yeap, K. W., Alengaram, U. J., Jumaat, M. Z., Bashar, I. I. (2018). Bond strength evaluation of palm oil fuel ash-based geopolymer normal weight and lightweight concretes with steel reinforcement. Journal of Adhesion Science and Technology 38(1): 19-35. (ISI-Indexed)
  • Hosen, M. A.,Jumaat, M. Z., Alengaram, U. J., & Ramli Sulong, N. H., CFRP strips for enhancing flexural performance of RC beams by SNSM strengthening technique, Construction and Building Materials 165 (2018), 28-44. (ISI-Indexed)

2017
  • Jameel, M., Ibrahim, A. E., Ahmad, S., & Jumaat, M. Z. (2017). Effect of moorings drag and inertia on response of spar platform. KSCE Journal of Civil Engineering, 1-11. (ISI-Indexed)
  • Aslam, M., Shafigh, P., Nomeli, M. A., & Jumaat, M. Z. (2017). Manufacturing of high-strength lightweight aggregate concrete using blended coarse lightweight aggregates. Journal of Building Engineering, 13, 53-62. (SCOPUS-Indexed)
  • Ahmmad, R., Alengaram, U. J., Jumaat, M. Z., Sulong, N. R., Yusuf, M. O., & Rehman, M. A. (2017). Feasibility study on the use of high volume palm oil clinker waste in environmental friendly lightweight concrete. Construction and Building Materials, 135, 94-103 (ISI-Indexed)
  • Mo, K. H., Bong, C. S., Alengaram, U. J., Jumaat, M. Z., & Yap, S. P. (2017). Thermal conductivity, compressive and residual strength evaluation of polymer fibre-reinforced high volume palm oil fuel ash blended mortar. Construction and Building Materials, 130, 113-121. (ISI-Indexed)
  • Mo, K. H., Goh, S. H., Alengaram, U. J., Visintin, P., Jumaat, M. Z. (2017). Mechanical, toughness, bond and durability-related properties of lightweight concrete reinforced with steel fibres. Materials and Structures 50: 46. (ISI-Indexed)
  • Aslam, M., Shafigh, P., & Jumaat, M. Z. (2017). High strength lightweight aggregate concrete using blended coarse lightweight aggregate origin from palm oil industry. Sains Malaysiana, 45(4), 667–675. (ISI-Indexed)
  • Hoque, N., Jumaat, M. Z., & Shukri, A. A. (2017). Critical curtailment location of EBR FRP bonded RC beams using dimensional analysis and fuzzy logic expert system. Composite Structures, 166, 87-95. (ISI-Indexed)
  • Hosen, M. A., Alengaram, U. J., Jumaat, M. Z., & Sulong, N. H. (2017). Glass fiber reinforced polymer (GFRP) bars for enhancing the flexural performance of RC beams using Side-NSM technique. Polymers, 9(5), 180. (ISI-Indexed)
  • Rahman, M. M., Jumaat, M. Z., & Islam, A. B. M. (2017). Weight minimum design of concrete beam strengthened with glass fiber reinforced polymer bar using genetic algorithm. Computers and Concrete, 19(2), 127-131. (ISI-Indexed)
  • Hoque, N., Shukri, A. A., & Jumaat, M. Z. (2017). Prediction of IC debonding failure of precracked FRP strengthened RC beams using global energy balance. Materials and Structures, 50(5), 210. (ISI-Indexed)
  • Hosen, A., Jumaat, M.Z.,Islam, A. B. M. S., Salam, M. A., Mo, K. H. (2017). Side-NSM composite technique for flexural strengthening of RC beams. Computers and Concrete 20(4). (ISI-Indexed)
  • Huda, M. N., Jumaat, M. Z., Islam, A. B. M., Darain, K. M. U., Obaydullah, M., & Hosen, M. A. (2017). Palm oil industry's bi-products as coarse aggregate in structural lightweight concrete. Computers and Concrete, 19(5), 515-526. (ISI-Indexed)
  • Sumesh, M., Alengaram, U. J., Jumaat, M. Z., Mo, K. H., & Alnahhal, M. F. (2017). Incorporation of nano-materials in cement composite and geopolymer based paste and mortar–A review. Construction and Building Materials, 148, 62-84. (ISI-Indexed)
  • Soeb, M. R., Islam, A. S., Jumaat, M. Z., Huda, N., & Arzu, F. (2017). Response of nonlinear offshore spar platform under wave and current. Ocean Engineering, 144, 296-304. (ISI-Indexed)
  • Sharmin, A., Alengaram, U. J., Jumaat, M. Z., Yusuf, M. O., Kabir, S. A., & Bashar, I. I. (2017). Influence of source materials and the role of oxide composition on the performance of ternary blended sustainable geopolymer mortar. Construction and Building Materials, 144, 608-623. (ISI-Indexed)
  • Alnahhal, M. F., Alengaram, U. J., Jumaat, M. Z., Alqedra, M. A., Mo, K. H., Sumesh, M. 2017. Evaluation of industrial by-products as sustainable pozzolanic materials in recycled aggregate concrete. Sustainability 9: 767. (ISI-Indexed)
  • Kabir, S. A., Alengaram, U. J., Jumaat, M. Z., Sharmin, A., & Bashar, I. I. (2017). Performance evaluation and some durability characteristics of environmental friendly palm oil clinker based geopolymer concrete. Journal of Cleaner Production.161,477-492. (ISI-Indexed)
  • Mo, K. H., Yeoh, K. H., Bashar, I. I., Alengaram, U. J., Jumaat, M. Z. 2017. Shear behaviour and mechanical properties of steel fibre-reinforced cement-based and geopolymer oil palm shell lightweight aggregate concrete. Construction and Building Materials 148: 369-375. (ISI-Indexed)
  • Ghazali, N., Jumaat, M. Z., Ibnul Bashar, I., Islam, A., Johnson Alengaram, U., Yusoff, S. (2017). Influence of steel fibers on the mechanical properties and impact resistance of lightweight geopolymer concrete. 152, 964-977. (ISI-Indexed)
  • Shah, S. N. R., Sulong, N. R., Khan, R., & Jumaat, M. Z. (2017) Structural performance of boltless beam end connectors, Advanced Steel Construction, 13(2), 144-159. (ISI-Indexed)

2016
  • S.N.R. Shah, N.H. Ramli Sulong, Mahdi Shariati, R. Khan, M.Z. Jumaat, Behavior of steel pallet rack beam-to-column connections at elevated temperatures, Thin-Walled Structures, 106, 2016), 471–483. (ISI-Indexed)
  • Ranjbar, N., Behnia, A., Alsubari, B., Birgani, P. M., & Jumaat, M. Z. (2016). Durability and mechanical properties of self-compacting concrete incorporating palm oil fuel ash. Journal of Cleaner Production, 112, 723-730. (ISI-Indexed)
  • Naji, S., Keivani, A., Shamshirband, S., Alengaram, U. J., Jumaat, M. Z., Mansor, Z., & Lee, M. (2016). Estimating building energy consumption using extreme learning machine method. Energy, 97, 506-516. (ISI-Indexed)
  • Islam, M. M. U., Mo, K. H., Alengaram, U. J., & Jumaat, M. Z. (2016). Mechanical and fresh properties of sustainable oil palm shell lightweight concrete incorporating palm oil fuel ash. Journal of Cleaner Production, 115, 307-314. (ISI-Indexed)
  • Mo, K. H., Alengaram, U. J., Jumaat, M. Z., Yap, S. P., & Lee, S. C. (2016). Green concrete partially comprised of farming waste residues: A review. Journal of Cleaner Production, 117, 122 138. (ISI-Indexed)
  • Hamidian, M. R., Jumaat, M. Z., Alengaram, U. J., Sulong, N. R., & Shafigh, P. (2016). Pitch spacing effect on the axial compressive behaviour of spirally reinforced concrete-filled steel tube (SRCFT). Thin- Walled Structures, 100, 213-223. (ISI-Indexed)

2015
  • Yap, S. P., Alengaram, U. J., Jumaat, M. Z., & Khaw, K. R. (2015). Torsional behaviour of steel fibre- reinforced oil palm shell concrete beams. Materials & Design, 87, 854-862. (ISI-Indexed)
  • Mo, K. H., Alengaram, U. J., & Jumaat, M. Z. (2015). Compressive behaviour of lightweight oil palm shell concrete incorporating slag. Construction and Building Materials, 94, 263-269. (ISI-Indexed)
  • Mo, K. H., Alengaram, U. J., & Jumaat, M. Z. (2015). Utilization of ground granulated blast furnace slag as partial cement replacement in lightweight oil palm shell concrete. Materials and Structures, 48(8), 2545-2556. (ISI-Indexed)
  • Hosen, M. A., Jumaat, M. Z., & Islam, a. B. M. S. (2015). Side Near Surface Mounted (SNSM) technique for flexural enhancement of RC beams. Materials & Design, 83, 587�597. (ISI-Indexed)
  • Alsubari, B., Shafigh, P., & Jumaat, M. (2015). Development of Self-Consolidating High Strength Concrete Incorporating Treated Palm Oil Fuel Ash. Materials, 8(5), 2154-2173. (ISI-Indexed)
  • Mo, K. H., Johnson Alengaram, U., Jumaat, M. Z., & Yap, S. P. (2015). Feasibility study of high volume slag as cement replacement for sustainable structural lightweight oil palm shell concrete. Journal of Cleaner Production, 91, 297-304. (ISI-Indexed)
  • Aslam, M., Shafigh, P., Jumaat, M. Z., & Shah, S. N. R. (2015). Strengthening of RC beams using prestressed fiber reinforced polymers A review. Construction and Building Materials, 82, 235-256. (ISI-Indexed)
  • Ranjbar, N., Mehrali, M., Mehrali, M., Alengaram, U. J., & Jumaat, M. Z. (2015). Graphene nanoplatelet-fly ash based geopolymer composites. Cement and Concrete Research, 76, 222-231. (ISI-Indexed)
  • Mo, K. H., Alengaram, U. J., Visintin, P., Goh, S. H., & Jumaat, M. Z. (2015). Influence of lightweight aggregate on the bond properties of concrete with various strength grades. Construction and Building Materials, 84, 377-386. (ISI-Indexed)
  • Shukri, A., Darain, K., & Jumaat, M. (2015). The Tension-Stiffening Contribution of NSM CFRP to the Behavior of Strengthened RC Beams. Materials, 8(7), 4131–4146. (ISI-Indexed)
  • Islam, A. B. M. S., Jumaat, M. Z., and Hussain, R. R. (2015). Incorporation preference for rubber-steel bearing isolation in existing eminent building structure. Computers and Concrete. (ISI/SCOPUS Indexed Publication)
  • Islam, A. B. M. S., Jumaat, M. Z., and Hussain, R. R. (2015). Incorporation preference for rubber-steel bearing isolation in existing eminent building structure. Computers and Concrete. Accepted. (ISI/SCOPUS Indexed Publication)
  • Hosen M. A., Jumaat M. Z. & Islam A. B. M. S. (2015). Inclusion of CFRP-Epoxy composite for End Anchorage in NSM-Epoxy Strengthened Beams. Advances in Materials Science and Engineering. Vol. 2015. (ISI/SCOPUS Indexed Publication)
  • Darain, K. M., Jumaat, M. Z., Islam, A. B. M. S., Obaydullah, M., Iqbal, A., Adham, M. I., & Rahman, M. M. (2015). Energy Efficient Brick Kilns for Sustainable Environment. Desalination and Water Treatment. 1-10. (ISI/SCOPUS Indexed Publication)
  • Islam, A. B. M. S., Jumaat, M. Z., Ahmmad, R. and Darain, K. M. (2015). Retrofitting of vulnerable RC structures by base isolation technique. Earthquakes and Structures. Accepted. (ISI/SCOPUS Indexed Publication)
  • Shah, S.N.R., Sulong, N.H.R., Shariati, M., & Jumaat, M.Z. (2015). Steel Rack Connections: Identification of Most Influential Factors and a Comparison of Stiffness Design Methods. PLoS ONE. 10(10): e0139422. doi:10.1371/journal.pone.0139422: pp. 1-19. (ISI-Indexed)
  • Naji, S., Shamshirband, S., Basser, H., Keivani, A., Alengaram, U. J., Jumaat, M. Z., & Petković, D. (2016). Application of adaptive neuro-fuzzy methodology for estimating building energy consumption. Renewable and Sustainable Energy Reviews, 53, 1520-1528. (ISI-Indexed)
  • Mo, K. H., Alengaram, U. J., Jumaat, M. Z., Liu, M. Y. J., & Lim, J. (2016). Assessing some durability properties of sustainable lightweight oil palm shell concrete incorporating slag and manufactured sand. Journal of Cleaner Production, 112, 763-770. (ISI-Indexed)
  • Jumaat, M. Z., Alengaram, U. J., Ahmmad, R., Bahri, S., & Islam, A. S. (2015). Characteristics of palm oil clinker as replacement for oil palm shell in lightweight concrete subjected to elevated temperature. Construction and Building Materials, 101, 942-951. (ISI-Indexed)
  • Yap, S. P., Alengaram, U. J., Jumaat, M. Z., & Khaw, K. R. (2015). Torsional and cracking characteristics of steel fiber-reinforced oil palm shell lightweight concrete. Journal of Composite Materials, 0021998315571431. (ISI-Indexed)
  • Ahmmad, R., Jumaat, M. Z., Alengaram, U. J., Bahri, S., Rehman, M. A., & bin Hashim, H. (2016). Performance evaluation of palm oil clinker as coarse aggregate in high strength lightweight concrete. Journal of Cleaner Production, 112, 566-574. (ISI-Indexed)
  • Mo, K. H., Visintin, P., Alengaram, U. J., & Jumaat, M. Z. (2016). Prediction of the structural behaviour of oil palm shell lightweight concrete beams. Construction and Building Materials, 102, 722-732. (ISI-Indexed)
  • Ranjbar, N., Behnia, A., Alsubari, B., Birgani, P. M., & Jumaat, M. Z. (2016). Durability and mechanical properties of self-compacting concrete incorporating palm oil fuel ash. Journal of Cleaner Production, 112, 723-730. (ISI-Indexed)
  • Shah, S. N. R., Sulong, N. R., Khan, R., Jumaat, M. Z., & Shariati, M. (2016). Behavior of Industrial Steel Rack Connections. Mechanical Systems and Signal Processing, 70, 725-740. (ISI-Indexed)
  • Ranjbar, N., Talebian, S., Mehrali, M., Kuenzel, C., Metselaar, H. S. C., & Jumaat, M. Z. (2016). Mechanisms of interfacial bond in steel and polypropylene fiber reinforced geopolymer composites. Composites Science and Technology, 122, 73-81. (ISI-Indexed)

2014
  • Islam, A., Alengaram, U. J., Jumaat, M. Z., & Bashar, I. I. (2014). The development of compressive strength of ground granulated blast furnace slag-palm oil fuel ash-fly ash based geopolymer mortar. Materials & Design, 56, 833-841. doi: 10.1016/j.matdes.2013.11.080 (ISI-Indexed)
  • Islam, A. B. M. S., Ahmad, S. I., Jumaat M. Z., & Hussain R. R. (2014). Efficient Design in Building Construction with Rubber Bearing in Medium Risk Seismicity: Case Study & Assessment. Journal of Civil Engineering and Management. (ISI/SCOPUS Indexed Publication)
  • Mo, K. H., Yap, K. K. Q., Alengaram, U. J., & Jumaat, M. Z. (2014). The effect of steel fibres on the enhancement of flexural and compressive toughness and fracture characteristics of oil palm shell concrete. Construction and Building Materials, 55, 20-28. doi: 10.1016/j.conbuildmat.2013.12.103 (ISI-Indexed)
  • Islam, A. B. M. S., Hussain, R. R., and Jumaat, M. Z. (2014). Implication of rubber-steel bearing nonlinear models on soft storey structures. Computers and Concrete. 
  • Kamruzzaman, M., Jumaat, M. Z., Sulong, N. H. R., and Islam, A. B. M. S. (2014). A Review on Strengthening Steel Beams using FRP under Fatigue. The Scientific World Journal. Vol. 2014 (ISI/SCOPUS Indexed Publication)
  • Ahmmad, R., Jumaat, M. Z., Bahri, S., and Islam, A. B. M. S. (2014). Ductility performance of lightweight concrete element containing massive palm shell clinker. Construction & Building Materials. 63, 234-241. (ISI/SCOPUS Indexed Publication)
  • Ahmmad, R., Jumaat, M. Z., Bahri, S. & Islam A. B. M. S. (2014). Effect of water-cement ratios on oil palm shell (OPS) lightweight concrete for ecofriendly construction. International Journal of Advances in Computer Science and Its Applications, 4(4), 246-249. (Non-ISI/Non-SCOPUS)
  • Wahab, M. J. A., & Jumaat, M. Z. (2014). Investigation of Linearity between Mechanical Properties of Wood Using Graphical Method. Sains Malaysiana, 43(2), 211- 218. 
  • Mazinani, I., Jumaat, M. Z., Ismail, Z., & Chao, O. Z. (2014). Comparison of shear lag in structural steel building with framed tube and braced tube. Structural Engineering and Mechanics, 49(3), 297-309. (ISI-Indexed)
  • Liu, M. Y. J., Chua, C. P., Alengaram, U. J., & Jumaat, M. Z. (2014). Utilization of Palm Oil Fuel Ash as Binder in Lightweight Oil Palm Shell Geopolymer Concrete. Advances in Materials Science and Engineering, 6. doi: 10.1155/2014/610274 (ISI-Indexed)
  • Payam Shafigh, Hafez Ghafari, Hilmi Bin Mahmud, Mohd Zamin Jumaat. (2014). "A comparison study of the mechanical properties and drying shrinkage", Materials and Design, 60, 320-327 (ISI-Indexed)

2013
  • Islam, A. B. M. S., Jameel, M., Ahmad S., Jumaat, M. Z. & Kurian V. J. (2013). Structural behaviour of fully coupled spar-mooring system under extreme wave loading. Journal of Civil Engineering and Management. 19(sup1), S69-S77. (ISI/SCOPUS Indexed Publication)
  • Jameel, M., Ahmad, S., Islam, A. B. M. S., & Jumaat, M. Z. (2013). Erratum: Non-linear Dynamic Analysis of Coupled Spar Platform (vol 19, 476, 2013). Journal of Civil Engineering and Management. 19(5), 772-772. (ISI/SCOPUS Indexed Publication)
  • Shafigh, P., Bin Mahmud, H., Jumaat, M. Z., & Zargar, M. (2014). Agricultural wastes as aggregate in concrete mixtures - A review. Construction and Building Materials, 53, 110-117. 
  • Islam, A. B. M. S., Jameel, M., Jumaat, M. Z., & Rahman, M. M. (2013). Optimization in Structural Altitude for Seismic Base Isolation at Medium Risk Earthquake Disaster Region. Disaster Advances, 6(1), 23-34. (ISI/SCOPUS Indexed Publication)
  • Safiuddin, M., Alengaram, U. J., Rahman, M. M., Salam, M. A., & Jumaat, M. Z. (2013). Use of Recycled Concrete Aggregate in Concrete: A Review. Journal of Civil Engineering and Management, 19(6), 796-810. 
  • Islam, A. B. M. S., Hussain, R. R., Jumaat, M. Z., & Rahman, M. A. (2013). Nonlinear dynamically automated excursions for rubber-steel bearing isolation in multi- storey construction. Automation in Construction, 30, 265-275. (ISI/SCOPUS Indexed Publication)
  • Mohammed Jameel, Suhail Ahmad, A B M Saiful Islam, Mohd Zamin Jumaat (2013) Non-linear dynamic analysis of coupled spar platform. Journal of Civil Engineering and Management, 19(4):476-491. (ISI/SCOPUS Indexed Publication)
  • N. Abdollahi Chahkand, M. Zamin Jumaat, N.H. Ramli Sulong, X.L. Zhao, M.R. Mohammadizadeh. 2013. Experimental and theoretical investigation on torsional behaviour of CFRP strengthened square hollow steel section. Thin-Walled Structures, 68: 135-140. (ISI-Indexed)
  • Mohammadhassani, M., Nezamabadi-Pour, H., Jumaat, M., Jameel, M., Hakim, S. J. S., & Zargar, M. (2013). Application of the ANFIS model in deflection prediction of concrete deep beam. Structural Engineering and Mechanics, 45(3), 323-336. 
  • Shafigh, P., Alengaram, U. J., Bin Mahmud, H., & Jumaat, M. Z. (2013). Engineering properties of oil palm shell lightweight concrete containing fly ash. Materials & Design, 49, 613-621. doi: DOI 10.1016/j.matdes.2013.02.004 (ISI-Indexed)
  • Hassan, A., Bin Mahmud, H., Jumaat, M. Z., ALsubari, B., & Abdulla, A. (2013). Effect of Magnesium Sulphate on Self-Compacting Concrete Containing Supplementary Cementitious Materials. Advances in Materials Science and Engineering. 
  • Mohammadhassani, M., Nezamabadi-Pour, H., Jumaat, M. Z., Jameel, M., & Arumugam, A. M. S. (2013). Application of artificial neural networks (ANNs) and linear regressions (LR) to predict the deflection of concrete deep beams. Computers and Concrete, 11(3), 237-252. (ISI-Indexed)
  • Fun, T. S., & Jumaat, M. Z. (2013). Comparison of European standard EN 310 and EN 789 in determining the bending strength and modulus of elasticity of red seraya (Shorea spp.) plywood panel: experimental and finite element analysis. European Journal of Wood and Wood Products, 71(4), 483-490. 
  • Chahkand, N. A., Jumaat, M. Z., Sulong, N. H. R., Zhao, X. L., & Mohammadizadeh, M. R. (2013). Experimental and theoretical investigation on torsional behaviour of CFRP strengthened square hollow steel section. Thin-Walled Structures, 68, 135-140. 

2012
  • U. Johnson Alengaram, B.A. Muhit, MZ Jumaat: Utilization of oil palm kernel shell as lightweight aggregate in concrete - a review; Construction and Building Materials, Elsevier; Article accepted (ISI-Indexed)
  • Jameel, M., Islam, A. B. M. S., Salman, F. A., Khaleel M. and Jumaat, M. Z. (2012) Wave data for shallow and deep water sedimentary basins of Malaysia , Advanced Science Letters. Vol. 14(1), pp. 360-364(5) (ISI-Indexed)
  • Islam A.B.M.S., Jameel M., Uddin M.A. and Jumaat M.Z. (2012),"Competent building elevation for incorporating base isolation in aseismic structure", Procedia Engineering, 50, 882-892. (ISI-Indexed)
  • Islam, A. B. M. S., Hussain, R. R., Jameel, M., & Jumaat, M. Z. (2012). Non-linear Time Domain Analysis of Base Isolated Multi-storey Building under Site Specific Bi-directional Seismic Loading. Automation in Construction. 22, 554-566. (ISI-Indexed)
  • Islam, A. B. M. S., Jameel, M., & Jumaat, M. Z. (2012). Oil and gas energy potential at Malaysian sea beds and Spar platform for deep water installation. International Journal of Green Energy. 9(2), 111-120. (ISI-Indexed)
  • Islam, A. B. M. S., Jameel, M., & Jumaat, M. Z. (2012). Review on offshore energy in Malaysia and floating Spar platform for efficient exploration. Renewable & Sustainable Energy Reviews. 16(8), 6268 - 6284. (ISI-Indexed)
  • Razavi, S. V., Jumaat, M. Z., Ahmed, E. S. H., & Mohammadi, P. (2012). Using generalized regression neural network (GRNN) for mechanical strength prediction of lightweight mortar. Computers and Concrete, 10(4), 379-390. 
  • Alam, M. A., & Jumaat, M. Z. (2012). Experimental Investigations on U- and L-Shaped End Anchored CFRP Laminate Strengthened Reinforced Concrete Beams. Arabian Journal for Science and Engineering, 37(4), 905-919. 
  • Islam, A. B. M. S., Hussain, R. R., Jameel, M., & Jumaat, M. Z. (2012). Non-linear time domain analysis of base isolated multi-storey building under site specific bi-directional seismic loading. Automation in Construction, 22, 554-566. 
  • Safiuddin, M., Jumaat, M. Z., & Salam, M. A. (2012). Flowing ability of self-consolidating concrete and its binder paste phase including palm oil fuel ash. Magazine of Concrete Research, 64(10), 931-944 
  • A B M Saiful Islam, Syed Ishtiaq Ahmad, Mohd Zamin Jumaat, Raja Rizwan Hussain (2012) Efficient Design in Building Construction with Rubber Bearing in Medium Risk Seismicity: Case Study & Assessment. Journal of Civil Engineering and Management. In Press, Corrected Proof: (ISI-Indexed)
  • A B M Saiful Islam, Mohd Zamin Jumaat, Raja Rizwan Hussain, Md Ashraful Alam (2012) Incorporation of Rubber-steel Bearing Isolation in Multi-storey Building. Journal of Civil Engineering and Management In Press, Corrected Proof: (ISI-Indexed)
  • Safiuddin, Md., Rahman, M. M., Salam, M. A., Md. Isa, M.H., Jumaat, M. Z. ¿Properties of self-consolidating POFA concrete¿, Advanced Science Letters, (accepted, in press), 2012, American Scientific Publishers (ISSN: 1936-6612). (ISI-Indexed)
  • Mohammadhassani, M., Jumaat, M. Z., & Jameel, M. (2012). Experimental investigation to compare the modulus of rupture in high strength self compacting concrete deep beams and high strength concrete normal beams. Construction and Building Materials, 30, 265- 273. 
  • Islam, A. B. M. S., Jameel, M., & Jumaat, M. Z. (2012). Oil and Gas Energy Potential at Malaysian Seabed and Spar Platform for Deepwater Installation. International Journal of Green Energy, 9(2), 111-120. 
  • A B M Saiful Islam, Mohammed Jameel, Mohd Zamin Jumaat 2011. Oil and gas energy potential at Malaysian sea beds and Spar platform for deep water installation International Journal of Green Energy. (ISI-Indexed)
  • Narmashiri K, Sulong NHR, Jumaat MZ. Failure analysis and structural behaviour of CFRP strengthened steel I-beams. Construction and Building Materials 2012;30;1-9. (ISI-Indexed)
  • Safiuddin Md, Salam MA, Jumaat MZ. Correlations between different hardened properties of high-strength self-consolidating concrete including palm oil fuel ash. Applied Mechanics and Materials 2012;117-119;1215-1222. (ISI-Indexed)
  • ABM Saiful Islam, M Jameel, SM Shirazi and FA Salman. 2012. Review of offshore energy in Malaysia and floating spar platform for sustainable exploration, Renewable and Sustainable Energy Reviews, Elsevier, 16: 6268-6284. (ISI-Indexed)

2011
  • K. Narmashiri and M. Z. Jumaat (2010), ¿Reinforced steel I-beams, a comparison between 2D and 3D simulation,¿ Simulation Modelling Practice and Theory, Elsevier Publication. (Accepted for publication) (ISI-Indexed)
  • Shafigh, P., Mahmud, H. and Jumaat M.Z. 2011. Effect of steel fiber on the mechanicaql properties of oil palm shell lightweight concrete. materials and Design 32(7):3926-3932. (ISI-Indexed)
  • Islam, A. B. M. S., Jameel, M., Rahman, M. A., & Jumaat, M. Z. (2011). Earthquake Time history for Dhaka, Bangladesh as competent seismic record. International Journal of the Physical Sciences, 6(16), 3921-3926. (ISI-Indexed)
  • Islam, A. B. M. S., Jameel, M., & Jumaat, M. Z. (2011). Study on optimal isolation system and dynamic structural responses in multi-story buildings. International Journal of the Physical Sciences, 6(9), 2219-2228. (ISI-Indexed)
  • Jumaat M.Z. and Alam M.A. 2011, \"Optimisation of intermediate anchors to eliminate premature shear failure of CFRP laminate flexurally strengthened RC beams.\" International Journal of the Physical Sciences 6(2):182-192. (ISI-Indexed)
  • A B M Saiful Islam, Mohammed Jameel, Syed Ishtiaq Ahmad, Firas A Salman, Mohd Zamin Jumaat 2011. Engendering eartquake response spectra for Dhaka region usable in dynamic analysis of structures. Scientific Research and Essays . (ISI-Indexed)
  • Islam, A. B. M. S., Jameel, M., Jumaat, M. Z., & Shirazi, S. M. (2011). Spar platform at deep water region in Malaysian sea. International Journal of the Physical Sciences, 6(30), 6872 - 6881. (ISI-Indexed)
  • Islam, A. B. M. S., Jameel, M., Ahmad, S. I., Salman, F. A., & Jumaat, M. Z. (2011). Engendering earthquake response spectra for Dhaka region usable in dynamic analysis of structures. Scientific Research and Essays, 6(16), 3519-3530. (ISI-Indexed)
  • Razavi, S.V., Jumaat, M.Z., El-Shafie, A.H. and Mohammadi, P. 2011. General regression neural network (GRNN) for the first crack analysis prediction of strengthened RC one-way slab by CFRP. International Journal of the Physical Sciences 6(10): 2439-2446. (ISI-Indexed)
  • Jumaat, M.Z., Rahman, M.A., Alam, M.A. and Rahman, M.M. 2011. Premature failures in plate bonded strengthened RC beams with an emphasis on premature shear: A Review. International Journal of the physical Sciences 6(2):156- 168. (ISI-Indexed)
  • Alengaram, U.J., Mahmud, H. And Jumaat, M.Z. 2011.Enhancement and prediction of modulus of elasticity of palm kernel shell concrete. Materials & Design 32(4):2143-2148. (ISI-Indexed)
  • Narmashiri, K., Jumaat, M.Z. and Sulong, N.H.R. 2011. Local stiffening of steel I-beams using CFRP materials. Advanced Material Research, 163-167:3840- 3845. (SCOPUS-Indexed)
  • Narmashiri, K., Jumaat, M.Z. and Sulong, N.H.R. 2011. Failure modes of CFRP flexural strengthened steel I- beams. Key Engineering Materials 471-472:590-595. (SCOPUS-Indexed)
  • Safiuddin, M., Salam, M.A. and Jumaat, M.Z. 2011. Correlation between fresh properties of self consolidating concrete including palm oil fuel ash. Advanced Material Research 250-253:409-416 (ISI-Indexed)
  • Safiuddin, M., Alengaram, U.J.,Salam, M.A., Jumaat, M.Z.,Jaafar, F.F. and Saad H.B. 2011. Properties of High- Workability Concrete with Recycled Concrete Aggregate. Materials Research 14(2):1-8. (ISI-Indexed)
  • Jumaat,M.Z.,Rahman, M.M. and Rahman, M.A. 2011. Review on bonding techniques of CFRP in strengthening concrete structures . International Journal of the Physical Sciences (ISI-Indexed)
  • Islam, A. B. M. S., Jameel, M., & Jumaat, M. Z. (2011). Seismic isolation in buildings to be a practical reality: Behavior of structure and installation technique. Journal of Engineering and Technology Research, 3(4), 99-117. (ISI-Indexed)
  • Islam, A. B. M. S., Jameel, M., Ahmad, S. I., & Jumaat, M. Z. (2011). Study on corollary of seismic base isolation system on buildings with soft story. International Journal of the Physical Sciences, 6(11), 2654-2661. (ISI-Indexed)
  • A B M Saiful Islam, Mohammed Jameel, Mohd Zamin Jumaat 2011. Effect of time elapse after wave hitting on coupled Spar platform. International Journal of the Physical Sciences 6(11):2671-2680. (ISI/SCOPUS Indexed Publication)
  • Safiuddin, M., Mohd H. Md.Isa and Jumaat, M.Z. (2011). ¿Fresh properties of SCC incorporating POFA as a supplementary cementing material,¿ Chiang Mai Journal of Science. Vol. 38 (3), pp. 389-404. (ISI cited publication). (ISI-Indexed)
  • Mohammad Mohammadhassania, Mohd Zamin Bin Jumaat, Mohamed Chemrouk, Ali Akbar Maghsoudi, Mohammed Jameel, Shatirah Akib. (2011) An Experimental Investigation on Bending Stiffness and Neutral Axis Depth Variation of over-reinforced High Strength Concrete Beams . Nuclear Engineering and Design, 241 (2011) 2060-2067. doi:10.1016/j.nucengdes.2011.02.022. (ISI cited Publication) (ISI-Indexed)
  • Mohammad Mohammadhassani, Mohd Zamin Bin Jumaat, Ali Akbar Maghsoudi, Shatirah Akib, Mohamed jameel, Rafiepour Najmeh, Mohammadhassani Amin, Sinaei Hamid, Heydar Rezaeyeh Esmaeil and Ghanbari Farhad. (2011). Bending stiffness and neutral axis depth variation of high strength concrete beams in seismic hazardous areas: Experimental investigation. International Journal of Physical Sciences, 6(3): 482- 494. (ISI-Cited Publication) (ISI-Indexed)
  • Mohammadhassani, M., Jumaat, M. Z., Ashour, A., & Jameel, M. (2011). Failure modes and serviceability of high strength self compacting concrete deep beams. Engineering Failure Analysis, 18(8), 2272-2281. 
  • Alengaram, U. J., Jumaat, M. Z., Mahmud, H., & Fayyadh, M. M. (2011). Shear behaviour of reinforced palm kernel shell concrete beams. Construction and Building Materials, 25(6), 2918-2927. 
  • Safiuddin, Md., Salam, M. A., and Jumaat, M. Z. (2011). ¿Effects of Recycled Concrete Aggregate on Fresh Properties of Self-Consolidating Concrete¿, Archives of Civil and Mechanical Engineering, Vol. 11, No. 4, pp. 1023-1041, (ISSN: 1644-9665). (ISI-Indexed)
  • Safiuddin, Md., Salam, M. A., and Jumaat, M. Z. (2011). ¿Correlations between different hardened properties of self-consolidating concrete including palm oil fuel ash¿ Journal of Applied Mechanics and Materials, Vol. 117-119, pp. 1215-1222, Trans Tech Publications, Switzerland (ISSN: 1660-9336). 
  • Shafigh, Payam; Jumaat, Mohd Zamin; Mahmud, Hilmi Bin; Alengaram, U. Johnson (2011) A new method of producing high strength oil palm shell lightweight concrete. Materials and Design, Vol. 32 (10), pp. 4839-4843. 
  • Payam Shafigh, Mahmoud Hassanpour M., S. Vahid Razavi and Mohsen Kobraei (2011) An investigation of the flexural behaviour of reinforced lightweight concrete beams. International Journal of the Physical Sciences. Vol. 6(10), pp. 2414-2421 
  • M. Safiuddin, M. A. Salam and M. Z. Jumaat, 2010. Utilization of palm oil fuel ash in concrete: A review. Journal of Civil Engineering and Management. (ISI-Indexed)
  • M. Z. Safiuddin, H. Mahmud and Jumaat M. Z., 2010. Efficacy of ASTM saturation techniques in measuring the water absorption of concrete. Arabian Journal for Science and Engineering. (ISI-Indexed)
  • P. Shafigh, M. Z. Jumaat and H. Mahmud, 2010. Oil Palm Shell as a light weight aggregate for production high strength lightweight concrete. Construction and Building Materials. (ISI-Indexed)

2010
  • Narmashiri, K & Jumaat, MZ. Rafek. 2010. Numerical study on strengthening composite bridges. 5th International Structural Engineering and Construction Conference Location: Las Vegas, NV Date: SEP 22-25. 241-246 (ISI-Indexed)
  • Chitsazan, I., Kobraei, M., Jumaat, M.Z. and Shafigh, P.2010. An experimental study on the flexural behaviour of FRP RC bemas and comparison of the ultimate moment capacity with ACI. Journal of Civil Engineering and Construction Technology 2:27-42. (Non-ISI/Non-SCOPUS)
  • Alengaram, U.J., Mahmud, H. , Jumaat, M.Z. 2010. Effect of aggregate size and proportion on strength properties of palm kernel shell concrete. International Journal of The Physical Sciences 5(12): 1848-1856. (ISI-Indexed)
  • Narmashiri,K., Jumaat, M.Z. and Sulong, N.H.R.2010. Investigation on end anchoring of CFRP strengthened steel I-beams. International Journal of the Physical Sciences 5(9):1360-1371. (ISI-Indexed)
  • K. Narmashiri, M.Z. Jumaat and N.H. Ramli Sulong, ¿Shear Strengthening of Steel I-Beams Using CFRP Strips¿, Scientific Research and Essays, Vol. 5 (16), p 2155-2168, 2010. (ISI-Indexed)
  • U.Johnson Alengaram, Hilmi Mahmud and Mohd Zamin Jumaat, Comparison of mechanical and bond properties of oil palm kernel shell. International Journal of Physical Sciences, Vol. 5, No. 8, August 2010, pp 1231- 1239 (ISI-Indexed)
  • U.Johnson Alengaram, Hilmi Mahmud, Mohd Zamin Jumaat. 2010. Development of lightweight concrete using industrial waste material, palm kernel shell as lightweight aggregate and its properties. International Conference on Chemical, Biological and Environmental Engineering-ICBEE 2010. (Thomson ISI Indexed).(Accepted). (ISI-Indexed)
  • A. B. M. S. Islam, S. I. Ahmad, M. Jameel and M. Z. Jumaat, 2010. Seisimic base isolation for buildings in region of low to moderate seisimisity: A practical alternative design. ASCE Journal of Practice Periodical on Structural Design and Construction. (ISI-Indexed)
  • P. Shafigh, M. Z. Jumaat and H. Mahmud, 2010. Effect of replacement of normal weight coarse aggregate with oil palm shell on properties of concrete. Arabian Journal for Science and Engineering. (ISI-Indexed)
  • P. Shafigh, M. Z. Jumaat and H. Mahmud, 2010. Mix design and mechanical properties of oil palm shell light weight concrete : A review. International Journal of Physical Sciences 5 (14): 2127 ¿ 2134, Oct 2010. ISSN 1992 ¿ 1950 @ 2010 Academic Journals. (ISI-Indexed)
  • M. Safiuddin, M. H. M. Isa and M. Z. Jumaat, 2010. Fresh properties of SCC Incorporating POFA as a Supplementary Cementing Material. Chiang Mai Journal of Science, ISSN: 0125-2526. (ISI-Indexed)
  • M. Z. Jumaat and M. A. Alam, 2010. Experimental Investigations on U and L-shaped end anchored CFRP laminate strengthened r. c. beams. Arabian Journal for Science and Engineering. (ISI-Indexed)
  • M. Safiuddin, M. Z. Jumaat, M. A. Salam, M. S. Islam and R. Hashim, 2010. Utilization of solid wastes in construction materials: A review. International Journal of Physical Sciences. (ISI-Indexed)
  • H. R. Dhanajaya, J. Nagabhushanam, P.C. Pandey and M. Z. Jumaat, Nov 2010. New twelve mode serendipity quadrilateral plate bending element based on Mindlin ¿ Reissner theory using Integrated Force Method. Structural Engineering and Mechanics. International Journal : 625 ¿ 642, ISSN 1225 ¿ 4568. (ISI-Indexed)
  • M. Z. Jumaat, M. H. Kabir and M. Obaydullah, 2010. Structural performances of reinforced concrete beams repairing from spalling. European Journal of Scientific Research : 45(1) (ISI-Indexed)
  • M. Z. Jumaat, M. M. Rahman and M. A. Alam, 2010. Flexural strengthening of R. C. continuous T-beam using CFRP laminate : A review. International Journal of the Physical Sciences:619 ¿ 625. (ISI-Indexed)
  • U. J. Alengaram, H. Mahmud and M. Z. Jumaat. Comparison of Mechanical and bond properties of oil palm kernel shall concrete with normal weight concrete. International Journal of the Physical Sciences: 1231-1239. (ISI-Indexed)
  • M. Z. Jumaat and M. A. Alam, Feb 2010. Experimental and numerical analysis of end anchored steel plate and CFRP laminate flexurally strengthened R.C. beams (2010),¿ International Journal of Physical Sciences:132 ¿ 144. (ISI-Indexed)

2009
  • M.Z. Jumaat and M.A.Alam, 2009, Experimental and numerical analysis of end anchored steel plate and CFRP laminate flexurally strengthened r.c. beams,Scientific Research and Essays (Accepted for publication) (ISI-Indexed)
  • M.A. Alam and M.Z. Jumaat (2009), \"Eliminating Premature End Peeling of Flexurally Strengthened Reinforced Concrete Beams,\" Journal of Applied Sciences, Vol.9, No.6, Pp.1106-1113. (SCOPUS-Indexed)
  • M. A. Alam and M.Z.Jumaat, 2009,Experimental investigations on U and L-shaped end anchored CFRP laminate strengthened reinforced concrete beams, Arabian Journal for Science and Engineering (Accepted for publication) (ISI/SCOPUS Indexed Publication)
  • H. Mahmud, M.Z. Jumaat and U.H. Alengaram (2009), \"Influence of sand/cement ratio on mechanical Properties of palm kernel shell concrete,\" Journal of Applied sciences, science alert, vol-9, no.-9, pp-1764-1769. (SCOPUS-Indexed)
  • M.Z. Jumaat, U.J. Alengaram and H. Mahmud (2009), \"Shear Strength of Oil Palm Shell Foamed Concrete Beams\", Materials and Design, Elsevier Publication, Vol.-30, No-6, PP-2227-2236. (ISI-Indexed)
  • M.Z. Jumaat and M.A. Alam (2009), \"Strengthening of Reinforced Concrete Beams Using Externally Bonded Plates and Anchorages,\" Australian Journal of Basic and Applied Sciences, Insinet Publication. (SCOPUS-Indexed)
  • Mohd Zamin Jumaat, U.Johnson Alengaram, Hilmi Mahmud. Shear Strength of Oil Palm Shell Foamed Concrete Beams, Materials and Design, Elsevier publications Vol. 30 No.6, pp 2227-2236 (ISI-Indexed)

2008
  • U.J. Alengaram, M.Z. Jumaat and H. Mahmud (2008), \"Ductility Behaviour of Reinforced Palm Kernel Shell Concrete Beams\", European Journal of Scientific Euro Journal, U.K, Vol.23, No.3, Pp.406-420. 
  • M.Z. Jumaat and M.A. Alam (2008), \"Effects of Intermediate Anchorages on End Anchored CFRP Laminate Flexurally Strengthened Reinforced Concrete Beams,\" Journal of Applied Sciences Research, Insinet Publication, Vol.9, No.1, Pp.142-148. 
  • U.J. Alengaram, M.Z. Jumaat and H. Mahmud (2008), \"Influence of Cementitious Materials and Aggregates Content on Compressive Strength of Palm Kernel Shell Concrete,\" Journal of Applied Sciences Research,Insinet Publication, Vol.8, No.18, Pp.3027-3213. 
  • M.Z. Jumaat and M.A. Alam (2008), \"Behaviour of U And L Shaped End Anchored Steel Plate Strengthened Reinforced Concrete Beams\", European Journal of Scientific Research, Vol.22, No.3, Pp.184-196. 
  • M.Z. Jumaat and M.A. Alam (2008), \"Experimental and Analytical Investigations on the Structural Behavoiur of Steel Plate and CFRP Laminate Flexurally Strengthened R.C. Beams\", Journal of Applied Sciences Research, Insinet Publication, Vol.8, No.23, Pp.4383- 4389. 

2007
  • M.Z. Jumaat and M.A. Alam (2007), \"Strengtheneing of Reinforced Concrete Structures,\" Feature Article in Jurutera, Bulletin of the Institution of Engineers, Malaysia, July 2007, Pp.28-29. 
  • S.N. Raman, M.Z. Jumaat, H. Mahmud and M.F.M. Zain (2007), \"Fibre Reinforced Concrete and High Performance Fibre Reinforced Cementitious Composites,\" Feature Article in Jurutera, Bulletin of the Institution of Engineers, Malaysia, July 2007, Pp.32-35. 

2006
  • M.Z. Jumaat and M.A.Alam (2006), \"Problems Associated With Plate Bonding Methods of Strengthening Reinforced Concrete Beams,\" Journal of Applied Sciences Research, Vol.2, No.10, 2006. 
  • M.Z. Jumaat, A.H.A. Rahim, J. Othman and M.S. Midon (2006), \"Strength Evaluation Of Oil Palm Stem Truss Refers\", Construction And Building Materials, Elsevier Publication, Vol.20, Pp.812-818. 
  • M.Z. Jumaat, M.H. Kabir and M. Obaydullah (2006), \"A Review on the Repair of Reinforced Concrete Beams,\" Journal of Applied Sciences Research, Insinet Publication, Vol.2, No.6, Pp.317-326. 
  • M.Z. Jumaat, A.H.A. Rahim, J. Othman and M.S. Midon (2006), \"Strength Evaluation of Oil Palm Stem Trussed Rafters\", Journal of Construction and Building Materials. 
  • M.Z. Jumaat and M.A. Alam (2006), \"Flexural Strengthening of Reinforced Concrete Beams, Using Ferrocement Laminate With Skeletal Bars,\" Journal of Applied Sciences Research, Insinet Publication, Vol.2, No.6, Pp.559-566. 
  • S.N. Raman, H. Mahmud and M.Z. Jumaat (2006), \"High Performance Fibre Reinforced Concrete,\" ACI Kl Chapter Bulletin, Vol.1, June 2006. 

2004
  • M.Z. Jumaat and B. Murty (2004), \"Yield Line Prediction of Nailed Timber Joints Using Nail Diameter and Timber Specific Gravity\", Wood Science and Technology, Journal of the International Academy of Wood Science, Sringer-Verlog, Vol.38, Pp.599-615. Disember 2004. 

2002
  • M.A. Kubaisy and M.Z. Jumaat (2002), \"Punching Shear of Ferrocement Sandwich Panels\", Journal of Ferrocement, Vol.32, No.1, January 2002. 
  • M.Z. Jumaat Et Al (2002), \"Projek Penyelidikan Dan Pembangunan Bahan Binaan Alternatif Daripada Sisa Pertanian-Batang Kelapa Sawit,\" Final Report Submitted to Ministry of Housing Dan Local Authority, May, 2002. 

2000
  • T.Y. Eng, N.K. Ping, L.T. Fai and M.Z. Jumaat (2000), \"Design of Precast Concrete Structures,\" Report Published in Juruteran, Bulletin of the Institution of Engineers, Malaysia, January, 2000, Pp.27. 
  • M.A. Kubaisy and M.Z. Jumaat (2000), \"Flexural Behaviour of Reinforced Concrete Slabs with Ferrocement Tension Zone Cover\", Journal of Construction And Building Materials, Vol.14, Issue 5, Pp.245-252, August 2000 
  • M.A. Kubaisy and M.Z. Jumaat (2000), \"Ferrocement Laminate Strengthens R.C Beams\", Concrete International Journal: ACI International, USA, Vol.22, No.10, October 2000. 

1999
  • M.A. Kubaisy and M.Z. Jumaat (1999), \"Punching Shear Strength of Ferrocement Slabs,\" Journal of Ferrocement, Vol.39, No.1, Aprill 1999. 
  • M.A.Al-Kubaisy and M.Z.Jumaat (1999), \"Punching Shear Strength of Ferro Cement Slabs Journal of Ferrocement\" Vol.39, No.1, April 1999. 

1998
  • M.Z. Jumaat (1998), \"Report on Three-Point Bending Test on Pre-Fabricated Steel I-Section,\" Report Submitted to Lion Construction and Engineering Sdn. Bhd., 1998. 

1997
  • M.Z. Jumaat Et All (1997), \"Appraisal, Diagnostic and Rehabilitation of First Floor Slabs and Beams of Wisma B, Kelang Container Terminal Berhad\" Report Submitted to Kelang Container Terminal Berhad, July, 1997. 

1996
  • H. Mahmud and M.Z. Jumaat (1996), \"Performance of Alform Beams Subjected to Flexure or Buckling,\" Report Submitted to Rapid Metal Development (M) Sdn. Bhd., April 1996. 
  • M.Z. Jumaat Et Al (1996), \"Appraisal, Diagnostic, Assessment and Structural Integrity Check of International Islamic University\'s Faculty of Education Gombak,\" Proposal Submitted to Asia Pacific Properties Sdn. Bhd., July, 1996. 
  • M.Z. Jumaat Et Al (1996), \"Collapse of Jib Crane at the Menara Alor Setar Complex,\" Report Submitted to Telekom Malaysia Bhd., August, 1996. 

1995
  • H. Mahmud and M.Z. Jumaat (1995), \"Strain of Monitoring of Tiara Condominium, Ampang, Selangor,\" Final Report Submitted to L & M Structures Sdn. Bhd., January 1995. 

1994
  • M.Z. Jumaat Et All (1994), \"Appraisal, Diagnostic, Assessment and Maintenance Of KCT Wharves, Port Klang,\" Interim Report Submitted to Kelang Container Terminal Berhad, January 1994. 
  • M.Z. Jumaat Et Al (1994), \"Appraisal, Diagnostic and Maintenance of KCT Wharves, Port Klang, \"Final Report Submitted to Kelang Container Terminal Berehad, August 1994. 

1993
  • M.Z. Jumaat Et Al (1993), \"Monitoring of Strains on Load Bearing Walls of Sultan Abu Bakar Mosque, Johor Bahru,\" Report Submitted to L&M Structures Sdn. Bhd, July 1993. 
  • M.Z. Jumaat Et Al (1993), \"M.Z. Jumaat Et Al, \"Appraisal, Diagnostic, Assessment and Maintenance of KCT Wharves, Port Klang,\" Inteption Report Submitted to Kelang Container Terminal, October 1993. 

1992
  • M.Z. Jumaat Et Al (1992), \"Report on the Site Investigation of the Repair Works on KCT Wharves\", Report Submitted to Kelang Container Terminal Bhd., October 1992. 
  • M.Z. Jumaat Et Al (1992), \"Preliminary Report on the Materials Used for Construction of Block D, Mutiara Court, Taman Permai Indah,\" Report Submitted to Jawatankuasa Siasatan Keruntuhan Rumah Pangsa Mutiara Court, Taman Peramai Indah, Cheras, Selangor, Kementerian Perumahan Dan Kerajaan Tempatan, Malaysia, October 1992. 
  • M.Z. Jumaat Et Al (1992), \"Load Test of the Third Floor Slabs and Beams of the American International Assurance Building,\" Report Presented to The American Home Assurance, July 1992. 
  • M.Z. Jumaat Et Al (1992), \"Recommendations on Making Block E Menara Budi College of the Universiti Malaya Secure and Prevention of Further Damage,\" Report Submitted to Graham Miller (Malaysia) Sdn. Bhd., September 1992. 

1991
  • M.Z. Jumaat (1991), \"Analysis of Built-Up Timber Columns using the Matrix Progression Method,\" Journal of Structural Engineering, American Society of Civil Engineers, Vol.117, No.7, July 1991, Pp.1911-1928. 
  • M.Z. Jumaat (1991), \"Analysis of Built-Up Timber Columns using the Matrix Progression Method\", Journal of Structural Engineering, American Society of Civil Engineers, Vol.117, No.7. 
  • M.Z. Jumaat Et Al (1991), \"Preliminary EIA for the Proposed Residential and Resort Development Near Templer Park, Mukim Rawang,\" Report Prepared for Vast Consultants Jurutera Perunding, July 1991. 

1989
  • M.Z. Jumaat (1989), \"The Buckling Loads of Layered and Spaced Timber Columns,\" Journal of Building Technology and Managemant, Annual Journal of the Building Technology Society, Tuanku Abdul Rahman College, Vol.15 1988/89, Pp.104-110. 
  • M.Z. Jumaat, H.A. Rahman, M.R. Karim and G.B. Jasmon (1989), \"Cooperation between Malaysian Universities in Engineering Education,\" Aeeseap Journal of Engineering Education, Vol.19, No.2, September 1989, Pp.51-56. 
  • M.Z. Jumaat (1989), \"The Buckling Loads of Layered and Spaced Timber Columns\", Annual Journal of the Building Technology Society (1988/89), Vol.15. 
  • M.Z. Jumaat Et Al (1989), \"Cooperation between Malaysian Universities in Engineering Education\", Aeeseap, Journal of Engineering Education, Vol.19, No.2, September 1989. 

1988
  • I. Othman, H. A. Razak, M. Z. Jumaat and A. B. Hamidon (1988), \"Structural Investigation Programme for the Main Building, Department of Physics, Universiti Malaya,\" Technical Report Submitted to the Universiti Malaya, November 1988. 
Proceeding

2012
  • Mohammed Jameel, A B M Saiful Islam, Firas A Salman, M Khaleel, Mohd Zamin Jumaat (2011) Wave data for shallow and deep water sedimentary basins of Malaysia In: The 2nd International Symposium on Mechanical Science and Technology (ISMST 2011) , December 20-21 Edited by:ISMST. Guangzhou, China: 

2011
  • Mohammed Jameel, A B M Saiful Islam, M Khaleel, Mohd Zamin Jumaat (2011) Nonlinear finite element analysis of spar platform In: The 2nd International Symposium on Mechanical Science and Technology (ISMST 2011) , December 20-21 Edited by:ISMST. Guangzhou, China: 
  • M. A. Rahman, M. Z. Jumaat and M. M. Rahman., 2011. Design recommendations for eliminating premature shear failure of flexurally strengthened RC beams. United Kingdom-Malaysia-Ireland Science conference 2011 (UMIES 2011), 12-14 July, 2011. 
  • M.Z. Jumaat, M.M. Rahman, M.A. Alam and M.A. Rahman., 2011). Appraisal of research progress on flexural strengthening of RC continuous T beam in the negative moment region by means of CFRP laminate. United Kingdom-Malaysia-Ireland Science conference 2011 (UMIES 2011), 12-14 July, 2011 
  • Mohd Zamin Jumaat, A B M Saiful Islam, Mohammed Jameel (2011) Nonlinear dynamic coupled behaviour of Integrated spar-mooring system in deep water region In: International Engineering education Conference, December 25-27 Edited by:FEIIC. 401-412 Madina, Kingdom of Saudi Arabia: 
  • Mohammed Jameel, Suhail Ahmad, A B M Saiful Islam, Mohd Zamin Jumaat (2011) Nonlinear Analysis of Fully Coupled Integrated Spar- Mooring Line System In: The 21st International Offshore and Polar Engineering Conference, June 19-24 Edited by:ISOPE. 198-205 Maui, Hawaii, USA: 

2008
  • U.J. Alengaram and M.Z. Jumaat (2008), \"Flexural Behaviour of Reinforced Palm Kernel Shell Concrete Beams,\" International Conference on Innovation and Smart Structural Systems for Sustainable Habitat, CIJ, Coimbatore, India,3-5th January 2008. 
  • U.J. Alengaram, M.Z. Jumaat and H. Mahmud (2008), \"Moderate Strength Light Weight Aggregate Foamed and Non-Foamed Concrete Incorporating Palm Kernel Shells as Light Weight Aggregates,\" International Conference on Sustainable Concrete Construction, Ratnagiri, India, 8-10th February 2008. 
  • M.Z. Jumaat, U.J. Alaengaram and M. Mahmud (2008), \"Usage of Oil Palm Shell as Light Weight Aggregates in Foamed Concrete,\" Regional Symposium between University ff Malaya and Chulalongkorn University on Presentation of Research Findings in Civil and Environmental Engineering, Bangkok, Thailand, 7-8th March, 2008. 
  • M.Z. Jumaat and M.A. Alam 2008), \"Strengthening of R.C. Beams using Externally Bonded Plates and Anchorages,\" Regional Symposium between University of Malaya and Chulalongkorn University on Presentation of Research Findings in Civil and Environmental Engineering, Bangkok, Thailand, 7-8th March 2008. 
  • U.J. Alengaram, M.Z. Jumaat and M.Z. Mahmud (2008), \"Usage of Palm Kernel Shell as Light Weight Aggregates to Produce Moderate Strength Light Weight Concrete,\" International Conference on Environmental Research and Technology, University of Science Malaysia, Penang, 28-30th May 2008. 
  • M.Z. Jumaat, F.M. Razali and A.H.A. Rahim (2008), \"Development Of Limit State Design Method for Malaysian Bolted Timber Joints,\" The 10th World Conference on Timber Engineering, WCTE 8, Miyazaki, Japan, 2-5th June, 2008. 
  • M.Z. Jumaat and A.H.A. Rahim (2008), \"Light Weight Roof Trusses from Oil Palm Trunks,\" The 10th World Conference on Timber Engineering, WCTE 8, Miayazaki, Japan, 2-5th June 2008. 
  • M.Z. Jumaat and M.A. Alam (2008), \"Experimental and Non-Linear Finite Element Studies of Unanchored Steel Plate and CFRP Laminate Flexurally Strengthened R.C. Beams,\" International Seminar on Civil and Infrastructure Engineering, UiTM Shah Alam, Malaysia, 11-12th June 2008. 
  • M.Z. Jumaat and M.A Alam (2008), \"Experimental and Nonlinear Finite Element Analysis of End Anchored Flexurally Strengthened R.C. Beams,\" International Conference on Construction and Building Technology, Hotel Grand Season, Kuala Lumpur, 16-20th June, 2008. 
  • U.J. Alengaran, M.Z. Jumaat and H. Mahmud (2008), \"Influence of Sand Content and Silica Fume on Mechanical Properties of Palm Kernel Shell Concrete,\" International Conference Construction and Building Technology, Hotel Grand Season, Kuala Lumpur, 16-20th June, 2008. 
  • M.Z. Jumaat and M.A. Alam(2008), \"Effects of End Anchors on Strengthened Reinforced Concrete Beams\", United Kingdom Malaysia Engineering Conference, The University College, London, 14-15th July, 2008. 

2007
  • M.Z. Jumaat, M. Obaydullah, M.H. Kabir and M.A. Alam (2007), \"Repired R.C. Slabs using Free Flowing Self-Compacting Mortar and Wire Mesh\", Proceedings of the World Engineering Congress, Penang, Malaysia, Auguest 5-9, 2007,Pp.549-561. 
  • M.Z. Jumaat and A.H.A. Rahim (2007), \"Design of Glued Laminated Timber in Accordance with the MS544:2001, Part 3\", Paper Presented at the Short Course on the Structural use of Timber, MS544:2001, Challenges and Application, at the Faculty of Civil Engineering, University of Technology Malaysia, Skudai, Johore, 27-28 February 2007. 
  • M.Z. Jumaat, M.H. Kabir and M. Obaydullah (2007), \"Behaviour of R.C. Beams Repired in Flexure,\" Proceedings of the International Conference on Advances in Cement Based Materials and Applications in Civil Infrastructure (ACBM-ACI), Lahore, Pakistan, December 12-14, 2007, Pp.1091-1102. 
  • M.Z. Jumaat, M. Obaydullah, M.H. Kabir and M.A. Alam (2007), \"Structural Behavoiur of Repired R.C. Slabs using Free Flowing Self-Compacting Mortar and 6 mm Polypropylene Fibre,\" Proceedings of the International Conference on Advances in Cement Based Materials and Applications in Civil Infrastructure (ACBM-ACI), Lahore, Pakistan, December 12-14, 2007, Pp.665-678. 
  • U.J. Alengaram, M.Z. Jumaat and H. Mahmud (2007), \"Comparison of Mechanical Properties and Structural Behabiour of Palm Kernel Shell Concrete Beams with Normal Weight Concrete Beams\", Proceedings of the Tength NCB International Seminar on Cement and Building Materials, The Ashok, New Delhi, India, November 27-30, 2007, Pp.511-520. 
  • S. Yusoff and M.Z. Jumaat (2007), \"Outcome Based Engineering Education-Strategizing Assessment of Learning Skills using Hierarchy Educational Objectives,\" Proceedings of the Second International Engineering Convention, Jeddah, Saudi Arabia, March 10-14, 2007, 439-442. (ISBN 978-983-41075-4-7@2007 FEIIC) 
  • M.Z. Jumaat, M.A. Alam And M. Obaydullah (2007), \"Comparative Analysis of U-Shaped End Anchored Steel Plate and CFRP Laminate Flexurally Strengthened R.C. Beams,\" Proceedings ff The World Engineering Congress, Penang, Malaysia, August 5-9, 2007, Pp.562-571(ISBN 978-983-41075-9-2@2007 FEIIC) 
  • M.Z. Jumaat and M.A. Alam (2007), \"Experimental Investigation on End and with Intermediate Anchored CFRP Laminate Flexurally Strengthened R.C. Beams,\" Proceedings of the International Conference on Advances in Cement Based Materials and Applications in Civil Infrastructure (ACBM-ACI), Lahore, Pakistan, December 12-14, 2007. 
  • M.Z. Jumaat (2007), \"Permissible Stress Design of Solid Timber Flexural Members\", Paper Presented at the Short Course on the Structural use of Timber, MS544:2001, Challenges and Application, at the Faculty of Civil Engineering, University of Technology Malaysia, Skudai, Johore, 27-28 February 2007. 
  • M.Z. Jumaat and M.A. Alam (2007), \"Plate Bonded Strengthened R.C. Beams with End and Intermediate Anchors,\" Proceedings of the Second International Engineering Convention, Jeddah, Saudi Arabia, March 10-14, 2007, 245-256 (ISBN 978-983-41075-4-7@2007 FEIIC) 
  • M.Z. Jumaat (2007), \"Permissible Stress Design of Glued Timber Flexural Members\", Paper Presented at the Short Course On The Structural use of Timber, MS544:2001, Challenges and Application, at the Faculty of Civil Engineering, University of Technology Malaysia, Skudai, Johore, 27-28 February 2007. 

2006
  • M.Z. Jumaat, A.B. Bakar, F.M. Razali, A.H.A. Rahim and J. Othman (2006), \"Embedment Strength of Malaysian Timbers\", Proceedings of the 9th World Conference on Timber Engineering, Portland, or., USA, August 6-10th 2006. 
  • M.Z. Jumaat And M.A. Alam (2006), \"Comparative Analysis of Steel Plate and CFRP Laminate Flexurally Strengthened Reinforced Concrete Beams,\" Proceedings of the International in Civil and Infrastructure Engineering, ISCIE\'06, Universiti Teknologi Mara, Malaysia, Ref. No. Struc 11. 
  • M.Z. Jumaat, A.H.A. Rahim J. Othman, and F.M. Razali(2006), \"Timber Engineering Research and Education in Malaysia\", Proceedings of the 9th World Conference on Timber Engineering, Portland, Or., USA, August 6-10th 2006. 
  • M.Z. Jumaat and M.A. Alam (2006), \"Behaviour of End with Intermediate Anchored Steel Plate and CFRP Laminate Flexurally Strengthened R.C. Beams,\" Engineering and Construction Conference (APSEC 2006), Pp.A27-A38, Kuala Lumpur, Malaysia. 

2004
  • C.B. Ong, T.Y. Eng, W.E. Ding and M.Z. Jumaat (2004), \"Prediction of Stiffness Values of Structural Glued-Laminated Beams,\" Proceedings of the 8th World Conference on Timber Engineering, WCTE 2004, June 14-17, 2004, Lahti, Finland, Pp.523-529. 
  • M.Z. Jumaat, A.N. Zainuddin, J. Othman, F.M. Razali, A.H.A. Rahim (2004), \"Development in Structural Timber Engineering, Design and Practices in Malaysia,\" Paper Presented at the one Day Seminar on Basic Timber Learning, Universiti Teknologi Mara, Selangor, Malaysia, 10th January, 2004. 
  • M.Z. Jumaat and A.R.A. Rahim (2004), \"The Preliminary Study on the Fracture Mechanics Parameters of Malaysian Timbers,\" Proceedings of the 3rd National Technical Postgraduate Symposium, TP04-CS-017, Armada Hotel, Selangor, Malaysia, 15-16 December, 2004, Pp.69-74. 
  • M.A. Alam and M.Z. Jumaat (2004), \"Strengthening of Reinforced Concrete Beams,\" Proceedings of the 3rd National Technical Postgraduate Symposium, TP04-CS-013, Armada Hotel, Selangor, Malaysia, 15-16 December 2004, Pp.50-55. 
  • M.Z. Jumaat, B. Murthy and T.Y. Eng (2004), \"Development of Plastic Theory for Malaysian Timber Nailed Joints,\" Proceedings of the 8th World Conference on Timber Engineering, WCTE 2004, June 14-17, 2004, Lahti, Finland, Pp.321-325. 
  • A.R.A. Malik, M.S. Midon, M.Z. Jumaat and W.M.W.A. Majid (2004), \"Revised Malaysian Code of Practice for Structural use of Timber,\" Proceedings of the 8th World Conference on Timber Engineering, WCTE 2004, June 14-17, 2004, Lahti, Finland, Pp.43-48. 

2002
  • M.Z. Jumaat and B. Murty (2002), \"The Relationship between Yield Load Point using Foschi Plastic Theory and Maximum Load on Malaysian Timber,\" The Proceedings of the 7th World Conference on Timber Engineering (WCTE 2002), Shah Alam, 12-15 Aug, 2002, Vol.3, Pp.153-159. 
  • M.Z. Jumaat, J. Othman and A.H.A. Rahim (2002), \"Small Clear Specimen Strength Testing on Oil Palm Trunk,\" The Proceedings of the 7th World Conference on Timber Engineering (WCTE 2002), Shah Alam, 12-15 Aug, 2002, Vol.3, Pp.87-94. 
  • T.Y. Eng, M.Z. Jumaat and K.F. Chai (2002), \"Flexural Behaviour of Visually Strength Graded Glulam Laminated Meranti Beam,\" The Proceedings of the 7th World Conference on Timber Engineering (WCTE 2002), Shah Alam, 12-15 Aug, 2002, Vol.3, Pp.214-221. 
  • M.Z. Jumaat, H.K. Seng, T.Y. Eng and P. Esakkimuthu (2002), \"Visual and Machine Stress Grading of Malaysian Timbers for Construction,\" Paper Presented at the National Workshop on the use of Timber in Construction,\" Prefabricated Timber Roof Truss at FRIM, Kepong, Selangor, 1-2 July, 2002. 
  • M.Z. Jumaat, S.I.Z. Aznan and A.H.A. Rahim (2002), \"Development in the Codes of Practice for the Structural Application of Timber with Regards to Timber Joints in Malaysia,\" The Proceedings of the 2nd World Congress, 22-25th July, 2002,, Kuching, Sarawak, Pp.189-194. 
  • M.Z. Jumaat and S.I. Z. Aznan (2002), \"Strength of Nailed Joints of Malaysian Solid Timber with Plywood,\" The Proceedings of the 7th World Conference on Timber Engineering (WCTE 2002), Shah Alam, 12-15 Aug, 2002, Vol.3, Pp.275-281. 
  • B. Murty and M.Z. Jumaat (2002), \"Yield Load Carrying Capacity for Malaysian Timber Nail Joints,\" Proceedings of the First Postgraduate Symposium (TECHPOS 2002), Universiti Malaya, Kuala Lumpur, 16-17th October, 2002, Pp.182-186. 

2001
  • M.A. Kubaisy and M.Z. Jumaat (2001), \"Crack Control of Reinforced Concrete Member using Ferrocement Tension Zone Layer\", Proceedings of the 7th International Symposium on Ferrocement and Thin Reinforced Cement Composites (Ferro-7), National University of Singapore, Pp.493-502, 27-29th June, 2001. 
  • M.Z. Jumaat, M.A. Kubaisy, E.S. Sa\'at, S.I. Adnan and A.N. Zainuddin (2001), \"Evaluation of Strength of Nail Joints for Malaysian Timber,\" Proceedings of The RMK7 IRPA Research Seminar, Universiti Malaya, 24-25th July, 2001. 
  • M.Z. Jumaat and A.H.A. Rahim (2001), \"Evaluation of Flexural and Compressive Strength of Ferrocement Sandwich Panels for Law Cost Housing,\" Proceedings of the RMK7 IRPA Research Seminar, Universiti Malaya, 24-25th July, 2001. 
  • M.Z. Jumaat, T.Y. Eng and A.H.A. Rahim (2001), \"Design of Glued-Laminated Timber in Accordance with the Malaysian Standard\", Paper Presented in Conjunction with the International Construction Week 2001, The Mines Exhibition Centre, Seri Kembangan, Selangor, 10-17th September, 2001. 
  • T.Y. Eng and M.Z. Jumaat (2001), \"Malaysian Standard on the Manufacture of Structural Glued-Laminated Timber,\" Paper Presented in Conjunction with the International Construction Week 2001, The Mines Exhibition Centre, Seri Kembangan, Selangor, 10-17th September, 2001. 
  • T.Y. Eng, M.Z. Jumaat, M.F.M. Jamil and H.F. Siang (2001), \"Flexural Behaviour of Visually Strength Graded Glulam Beams from Bintangor,\" Proceedings of Symposium B, Malaysian Science and Technology Congress 2001, Melaka 10th October, 2001. 
  • M.Z. Jumaat, Kubaisy, E.S Sa\'at, A.I.Z. Adnan and A.N. Zainuddin (2001), \"Strength of Nail Joints for Malaysian Timber,\" Proceedings of the International Conference on Engineering and Technology 2001(BICET), Bandar Seri Begawan, Brunei Darussalam, 9-11th October, 2001, Pp.169-181. 
  • M.Z. Jumaat and Y.E. Tan (2001), \"Design of Glued Laminated Timber in Accordance with the MS544:Part3,\" Paper Presented in Conjunction with CIDB Road Show on Timber Standards for the Construction Industry, CIDB, Kuching, Sarawak, 12-13th November, 2001. 
  • Y.E. Tan and M.Z. Jumaat (2001), \"Malaysian Standard MS758:2001- Glued Laminated Timber: Performance Requirements and Minimum Production Requirements,\" Paper Presented in Conjunction with CIDB Road Show on Timber Standards for the Construction Industry, CIDB, Kuching, Sarawak, 12-13th November, 2001. 
  • M.Z. Jumaat, M.S. Midon and A.H.A. Rahim (2001), \"Recent Changes in the Malaysian Code of Practice for the Structural use of Timber with Regards to Timber Joints,\" Paper Presented in Conjunction with CIDB Road Show on Timber Standards for the Construction Industry, CIDB, Kuching, Sarawak, 12-13th November, 2001. 
  • M.Z. Jumaat, N. Samir and M.A. Kubaisy (2001), \"Deformation and Rigidity of Proposed Precast Concrete Connection System,\" Proceedings of the 7th International Conference on Concrete Engineering and Technology (Concept 2001), Shah Alam, Selangor, Pp.116-127, 5-7th June, 2001. 

2000
  • M.Z. Jumaat, N. Samir and M.A. Kubaisy (2000), \"Threaded Rods Connections for Precast Reinforced Concrete Frames,\" Paper Presented at the S.E.A. Regional Conference on Higher Engineering Education Network (Recheen 2000), Kuala Lumpur, 15-17th November, 2000. 
  • T.Y. Eng, M.Z. Jumaat, B.H.A. Bakar, A.R.A. Malik, R. Hashim and W.E. Ding (2000), \"Design Stresses of Indigenous Timber Species for Structural Glu-Lamination,\" Paper Presented at the Seminar Hasil Penyelidikan Organised by Construction Industry Development Board Malaysia in Conjunction with the National Construction Week at the Mines Exhibition and Convention Centre, Seri Kembangan, Selangor, 12th September, 2000. 
  • M.Z. Jumaat, N. Samir and M.A. Kubaisy (2000), \"Ferrocement Sandwich Pane is for Load Bearing Walls and Slabs,\" Paper Presented at the National Seminar on Industrialised Building Systems Organised by the Housing Research Centre, Universiti Putra Malaysia, The Construction Industry Development Board Malaysia and Malaysian Industry-Government Group for High Technology, The Mines Beach Resort and SPA, Seri Kembangan, Selangor, 26th September, 2000. 

1998
  • M.Z. Jumaat (1998), \"Promoting Effective and Greater Usage of Structural Timbers in Malaysia,\" Proceedings of the 5th World Conference on Timber Engineering, Montreux, Switzerland, Vol.2, August 17-20, 1998, Pp.1-764. 

1995
  • M.Z. Jumaat, J. Othman, S.S. Ching and A.K. Seng (1995), \"Initial Study on the Behaviour of High Strength Reinforced Concrete Beams under Static and Dynamic Loadings,\" Proceedings of the 4th International Conference of Concrete Engineering and Technology, Shah Alam, Selangor, 1995,Pp.TSI 2-1 to TSI 2-24. 

1992
  • T.Y. Eng, M. Ahmad and M.Z. Jumaat (1992), \"Use of Light Red Meranti for Structural Glulam in Malaysia,\" Proceedings of the 2nd CIB/W18B International Conference on Tropical and Hardwood Timber Structures, Kuala Lumpur, 7-9 September, 1992, Pp.B16-B32. 
  • M.Z. Jumaat (1992), \"Optimum Design of Layered and Spaced Timber Columns,\" Proceedings of the 2nd CIB/W18B International Conference on Tropical and Hardwood Timber Structures, Kuala Lumpur, 7-9 September, 1992, Pp.CI 1-CI18. 

1991
  • M.Z. Jumaat (1991), \"Design of Timber Trusses,\" Paper Presented at the Course on Structural Design of Timber, Organised by the Malaysian Industry Board, Kuantan, 24-26 September, 1991. 
  • M.Z. Jumaat (1991), \"Design of Timber Joints,\" Paper Presented at the Course on Structural Design of Timber, Organised by the Malaysian Industry Board, Kuantan, 24-26 September, 1991. 
  • M.Z. Jumaat (1991), \"Design of Timber Columns,\" Paper Presented at the Course on Structural Design of Timber, Organised by the Malaysian Industry Board, Kuantan, 24-26 September, 1991. 
  • M.Z. Jumaat (1991), \"Timber Beam Design in Accordance to BS5268,\" Paper Presented at the Course on Structural Design of Timber, Organised by the Malaysian Industry Board, Kuantan, 24-26 September, 1991. 
  • M.Z. Jumaat (1991), \"Timber Beam Design in Accordance to MS544,\" Paper Presented at the Course on Structural Design of Timber, Organised by the Malaysian Industry Board, Kuantan, 24-26 September, 1991. 
  • M.Z. Jumaat (1991), \"Comparison between MS544 and BS5268\" Paper Presented at the Course on Structural Design of Timber, Organised by the Malaysian Industry Board, Kuantan, 24-26 September, 1991. 

1990
  • M.R. Karim, M.Z. Jumaat, H.A.R. Rahman And G.B. Jasmon (1990), \"Cooperation between ASEAN Universities in Engineering Education and Research,\" Proceedings of the 8th Conference of ASEAN Federation of Engineering Organisations, Penang, Malaysia, February 12-14, 1990. 

1989
  • I. Othman, H.A. Razak, M.Z. Jumaat and A.B. Hamidon (1989), \"Cracking and Concrete Deterioration in a Reinforced Concrete Frame Building,\" Proceedings of the International Conference on Inspection, Appraisal, Repairs and Maintainence of Buildings and Structures, Singapore, 19-20 Jan, 1989 
  • H.A. Rahman, R. Kassim,M.Z. Jumaat and I. Othman, \"Prefabricated Housing System by Manual Method using Cement-Based Materials,\" Regional Conference on Concrete Engineering and Technology, Subang Merlin, Kuala Lumpur, 12-14th June, 1989. 
  • I. Othman, H.A. Razak, M.Z. Jumaat, A.B. Hamidon and M.A.M. Din (1989), \"Inspection and Appraisal of Concrete Deterioration in Heavy Loaded Scientific Laboratory,\" Regional Conference on Concrete Engineering and Technology , Subang Merlin, Kuala Lumpur, 12-14 June, 1989. 
  • M.Z. Jumaat, H. Mahmud, E.S Puay and H.L. Hong (1989), \"Comparison of Crack Widths and Deflections in Reinforced Concrete Beams using Ordinary Portland Concrete and Superplasticized Concrete,\" Regional Conference on Concrete Engineering and Technology, Subang Merlin, Kuala Lumpur, 12-14th June, 1989. 
  • M.G. Shaaban, M.R. Karim, A. Hassan and M.Z. Jumaat (1989), \"Impacts of Engineering Projects on the Environment,\" Proceedings of the International Conference on Engineering and Tourism, Melaka, September 19-21, 1989, Pp.TS4-3/1 To TS4-3/11. 
  • M.Z. Jumaat and M.L. Zakaria (1989), \"Timber Engineering Practice in Malaysia,\" Proceedings of the Pacific Timber Engineering Conference, Auckland, New Zealand, August 1989. 
  • M.Z. Jumaat (1989), \"Layered and Spaced Timber Columns with Interlayer Slips from Malaysian Hardwoods,\" Proceedings of the Pacific Timber Engineering Conference, Auckland, New Zealand, August 1989. 
  • M.Z. Jumaat, H. Mahmud, E.S Puay and H.L. Hong (1989), \"The Influence of Cover on Crack Widths and Deflections of Reinforced Concrete Beams,\" Regional Conference on Concrete Engineering and Technology, Subang Merlin, Kuala Lumpur, 12-14th June, 1989. 

1988
  • A.B. Hamidon, H.A. Razak, M.Z. Jumaat and I. Othman (1988), \"An Investigation on The Extend of Cracking Damage in a Reinforced Concrete Frame\", Proceedings of the National Structural Engineering Conference, Universiti Teknologi Malaysia, Kuala Lumpur, 2-3 November, 1988. 
  • M.Z. Jumaat(1988) , \"Methods of Predicting the Buckling Loads of Layered and Spaced Timber Columns Assembled by Nailings,\" National Seminar on the Structural use of Malaysian Timber in Construction, Merlin Hotel, Kuala Lumpur, 25-27 October, 1988. 
  • M.Z. Jumaat (1988), \"The Prospect of Greater usage of Timber in Structural Construction in Malaysia and the Steps towards Its Achievement,\" National Seminar on the Structural use of Malaysian Timber in Construction, Merlin Hotel, Kuala Lumpur, 25-27 October, 1988. 

1987
  • M.Z. Jumaat (1987), \"The Main Tropical Environmental Factors and their Effects on Timber Engineering Practice,\" Proceedings of the first Conference CIB-W18B Tropical and Hardwood Timber Structures, Singapore, 26-28 October 1987. 
Others

2004
  • A.R.A. Malik, M.S. Midon, M.Z. Jumaat and W.M.W.A. Majid (2004), \"Revised Malaysian Code of Practice for Structural Use of Timber\", Proceedings of the 8th World Conference on Timber Engineering, WCTE 2004, June 14-17, 2004, Lahti, Finland, Pp. 43-48. 
  • J.Othman and M.Z. Jumaat (2004), \"The Development of the Malaysian Codes of Practice for the Structural Use of Timber with Emphasis on Timber Joints\", Proceedings of the 2nd. International Conference on Structural Engineering Mechanics and Computation, Cape Town, South Africa, July 2004. 
  • M.Z. Jumaat, B. Murty and T.Y. Eng (2004), \"Development of Plastic Theory for Malaysian Timber Nailed Joints\", Proceedings of the 8th World Conference on Timber Engineering, WCTE 2004, June 14-17, 2004, Lahti, Finland, pp. 321-325 

AREAS OF RESEARCH
(Project title), (Role), (From)-(Until), (Level), (Source).


  • Development of waterproofing cement mortar using plastic filling, Consultant, 2016 - 2018, Bantuan Kecil Penyelidikan (BKP), (National)
  • Construction Waste Recycling Center For Sustainable Drainage Construction, Consultant, 2016 - 2017, UM Living Lab Grant Programme - SUS (Sustainability Science), (National)
  • Novel polymer-modified mortar overlay for protection and repair application of structures, Consultant, 2016 - 2019, Bantuan Kecil Penyelidikan (BKP), (National)
  • Synthesis of Nano Silica, Alumina and Tio2 in the Development of Geopolymer of Concrete Using Local Waste, Co-Investigator, 2015 - 2018, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • Development of Effective Repair and Rehabilitation Material Consisting Local Waste Material for Affordable Housing, Principal Investigator(PI), 2015 - 2016, Grand Challenge, (National)
  • Enhancement of Concrete Properties Made From Local Wastes Using Nano Particles, Principal Investigator(PI), 2015 - 2018, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • Plastic Hinges Propagation Mechanism of Soft-Storey RC Buildings Subjected to Ranau Earthquake, Co-Investigator, 2015 - 2018, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • Plastic Hinges Propagation Mechanism of Soft-story RC Buildings Subjected to Ranau Earthquake, Consultant, 2015 - 2018, Bantuan Kecil Penyelidikan (BKP), (National)
  • Application of Environmental-Friendly Building Materials Consisting of Local Waste Materials for Affordable Housing, Co-Investigator, 2015 - 2017, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • Fully Coupled Nonlinear Dynamic Analysis of Spar Platform for Efficient Hydrocarbon Exploration in Malaysian Deep Sea, Principal Investigator(PI), 2014 - 2017, Fundamental Research Grant Scheme (FRGS), (National)
  • Flexural & Bond Behaviour of Palm Shell Lightweight Geopolymer Concrete, Principal Investigator(PI), 2013 - 2015, Exploratory Research Grant Scheme (ERGS), (National)
  • Development of Sustainable Concrete Structures Using Local Waste Materials, Principal Investigator(PI), 2012 - 2013, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • Theoretical and Experimental Study on the Strength and Ductility of Steel Tubular Short Columns Filled With Rebar-Reinforced Concrete, Principal Investigator(PI), 2012 - 2015, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • Wind Induced Response of Offshore Spar Platform, Co-Investigator, 2012 - 2014, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • Usage of OPS as Aggregate Replacement in Concrete, Principal Investigator(PI), 2012 - 2015, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • Exploring the potential of malaysian palm oil fuel ash in developing durable selfcompacting concrete, Principal Investigator(PI), 2012 - 2014, ScienceFund, (National)
  • Strengthening Structural elements for load and fatigue, Principal Investigator(PI), 2012 - 2015, High Impact Research (HIR), (National)
  • Wind induced response of offshore Spar platform, Consultant, 2012 - 2014, Geran Penyelidikan Universiti Malaya (UMRG) - AET (Innovative Technology (ITRC)), (University)
  • Behaviour of CFRP laminate reinforced concrete composite structures, Principal Investigator(PI), 2011 - 2013, Prototype Research Grant Scheme (PRGS), (University)
  • Synthesis of Blast Resistant Structures, Principal Investigator(PI), 2011 - 2015, High Impact Research (HIR), (University)
  • Experimental Investigation of Microscopic, Functional Properties and Shear Behaviour of Palm Kernel Shell Foamed Concrete, Co-Investigator, 2010 - 2012, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • Development of high strength self-consolidating concrete incorporating palm oil fuel ash as a supplementary cementing material, Principal Investigator(PI), 2009 - 2012, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • Enhancing the Performance of CFRP Laminate Strengthened R.C. beams, Principal Investigator(PI), 2009 - 2012, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • Eliminating premature debonding of plate bonded strengthened R.C. structures, Principal Investigator(PI), 2008 - 2010, Short Term Research Fund (Vote F)(PJP), (National)
  • Technique of repairing and strengthening of reinforced concrete beams under repeated loads and fatigue, Principal Investigator(PI), 2008, MPKSN, (National)
  • Limit State Design Of Malaysian Timber Joints, Principal Investigator(PI), 2008, CIDB, (National)
  • Development of palm kernel shell lightweight aggregate foamed and non-foamed concrete, Co-Investigator, 2007 - 2010, ScienceFund, (National)
  • Enhancement of dowel-type joints for structural timber applications in malaysia, Principal Investigator(PI), 2007 - 2009, Fundamental Research Grant Scheme (FRGS), (National)
  • Techniques of repairing HPC beams under repeated loads and fatigue., Others, 2007, MPKSN , (National)
  • Behaviour of high performance concrete beams for repeated loads and fatigue, Principal Investigator(PI), 2006 - 2009, ScienceFund, (National)
  • Strength of timber joints under axial load and bending, Others, 1999 - 2004, MPKSN , (National)
  • Prefabricated low cost housing, Others, 1996 - 2000, MPKSN , (National)
  • Rural housing by manual method, Others, 1992 - 1998, MPKSN , (National)
  • Projek penyelidikan dan pembanguan bahan binaan alternative daripada sisa pertnian-batang kelapa sawit., Others, 1992 - 2002, Ministry of Housing and Local Government, (National)
  • Cracking and deflection of reinforced concrete structural member., Others, 1991 - 1992, MPKSN , (National)
  • Structural Analysis and Design of Reinforced Concrete and Structures

CONSULTATION PROJECT/CONSULTANCY
(Project title), (Role), (From)-(Until), (Organisation).


  • Besut barrage concrete study- Unit Perundingan Universiti Malaya (UPUM)- University Malaya Consultancy Unit, 2009-2009, RJR Dinamik Sdn Bhd
  • Effect of repeated Loads on Railway Sleepers, 1998-1998, AIO Sdn. Bhd.
  • Structural appraisal of KCT building, 1997-1997, Klang Container Terminal
  • Collapse of Crane at Telecom Tower, Alor Star, Kedah., 1996-1996, Telecom Malaysia Berhad
  • Crack Monitoring on Kompleks MPKS, Alor Star, Kedah., 1995-1995, HLA Consultants
  • Appraisal, Diagnostic, Assessment and Maintenance of KCT warehouses., 1993-1993, Kalang Container Terminal
  • Ujian Struktur & Kerja Baik Pulih Bangunan Asrama Kedua, Universiti MAlaya., 1992-1992, Universiti Malaya
  • Preliminary Report on the Materials used For Construction of Block D, Muhara Court, Taman Permali Indah., 1992-1992, Ministry of Housing and Local Government
  • Recommendation on Making of Block E, Menara Budi College Source & Prevention From Further Damage., 1992-1992, Graham Mills(M) Sdn Bhd
  • load Test of the 3rd Floor Slabs & Beams of the American International Assurance Building., 1992-1992, American International Assurance
  • Preliminary EIA Report for the Proposed Residential and Resort Development Near Templer Park, Mukim Petaling., 1992-1992, Vast Chambers Jurutera Perunding
  • Projek penyeldikan & Pembanguan Bahan Binaan Alternatif daripada Sisa Pertanian-Bantang Kelapa Sawit., 1991-1991, Ministry of Housing and Local Government

AWARDS AND RECOGNITIONS
(Name of Award), (Awarding Institution), (Year Awarded), (Level).


  • Certificate of Excellent Service, University Malaya, 2016, (University)
  • Excellence Service Award, University Malaya, 2012, (University)
  • Khidmat Setia 30 Award, 2010
  • Certificate of Excellent Service, University Malaya, 2009, (University)
  • Excellence Service Award, University Malaya, 2008, (University)
  • Certificate of Excellent Service, University Malaya, 2007, (University)
  • Certificate of Excellent Service, University Malaya, 2006, (University)
  • Certificate of Excellent Service, University Malaya, 2005, (University)
  • Excellence Service Award, University Malaya, 2004, (University)
  • Excellence Service Award, University Malaya, 2002, (University)
  • Khidmat Setia 20 Award, 2001

PRESENTATIONS
(Title), (Event), (Date Presented), (Organiser), (Level).


PRESENTER
  • Effect of Palm Oil Fuel Ash on Permeable Porosity and Water Absorption of High-Strength Concrete, The First Australasia and South-East Asia Structural Engineering and Construction Conference, 2012-11-28 to 2012-12-02, ISEC, (International)
  • Effective shear strengthening method for flexurally strengthened RC beams., The First Australasia and South-East Asia Structural Engineering and Construction Conference Perth, Australia, Nov 28-Dec 2, 2012., 2012-11-28 to 2012-12-02, ISEC, (International)
  • Behaviour of RC Beams Strengthened with NSM Steel and CFRP Bars , Sixth Jordanian International Civil Engineering Conference, 2015-03-10 to 2015-03-12, Jordan Engineers Association, (International)
  • Development of geopolymer mortar using ternarry binders, International Conference on Engineering Technology and Management, 2015-06-16 to  
  • Fine and coarse aggregates from local wastes for geopolymer concrete, International Conference on Engineering Technology and Management, 2015-06-16 to  
PLEANARY/KEYNOTE SPEAKER
  • Enhancing the Efficiency of Structural Strengthening for RC Beams, First International Conference on Advances in Civil Infrastructure and Construction Materials, 2015-12-14 to 2015-12-15, Military Institute of Science and Technology, Bangladesh, (International)

EXPERT/TECHNICAL CONTRIBUTIONS
(Activity), (Organisation), (Role), (From)-(Until), (Level).


  • Jawatankuasa Penilaian Geran Penyelidikan Pengurusan Bencana Banjir, Kementerian Pengajian Tinggi, Committee Member, 2015-2015, (National)
  • Panel Penilai Skim Geran Penyelidikan Fundamental, Kementerian Pengajian Tinggi, Committee Member, 2015-2015, (National)
  • Panel Penilai Dana Penyelidikan Kementerian Pengajian Tinggi, Kementerian Pengajian Tinggi, Committee Member, 2013-2015, (National)
  • Audit Evaluation panel for Faculty of Engineering, University of Malaya, Committee Member, 2012-2012, (National)

EVALUATION ACTIVITIES
(Description), (Evaluation Activity),(Year).


  • Comparison of Prefabricated Reinforced Concrete Beam to Column Joints, Thesis Supervision-undergraduate ,  ( )
  • Determination of Fracture Mechanics Parameters for Hardened Cement Paste (HCP) and Concrete, Thesis Supervisions-undergraduate ,  ( )
  • Fatigue Strength of Concrete, Thesis Supervisions-undergraduate ,  ( )
  • Determination of Fracture Mechanics Parameters for High Strength Concrete, Thesis Supervisions-undergraduate ,  ( )
  • Fracture Mechanics Parameters for High Strength or High Performance Concrete, Thesis Supervisions-undergraduate ,  ( )
  • Precast Reinforced Concrete Joint Systems, Thesis Supervisions-undergraduate ,  ( )
  • Effects of Repeated Loads on High Strength Beams, Thesis Supervisions-undergraduate ,  ( )
  • Design of Crack Controlled Reinforced Beam, Thesis Supervisions-undergraduate ,  ( )
  • Kajian Ketuatan Stuktur Kayu Dari Batang Kelapa Sawit, Completed Dissertations-postgraduate ,  ( )
  • Behaviour of Reinforced Concrete Beams Strengthened by Ferrocement under Static Loads, Thesis Supervisions-undergraduate ,  ( )
  • Design of Timber Joints to Resist Bending Moments, Thesis Supervisions-undergraduate ,  ( )
  • Reinforced Concrete Beams Strengthened by Ferrocement using Steel Dowels as the Fastener, Thesis Supervisions-undergraduate ,  ( )
  • Reinforced Concrete Beams Strengthened by Ferrocement using Hilti Bolts as the Fastener, Thesis Supervisions-undergraduate ,  ( )
  • Moment Resisting Joint for Timber Structures, Thesis Supervisions-undergraduate ,  ( )
  • Plastic Method of Deriving the Basic Loads of Bolts on Malaysian Timbers, Thesis Supervisions-undergraduate ,  ( )
  • Basic Load of Nails on Laminated Veneer Lumber, Thesis Supervisions-undergraduate ,  ( )
  • Basic Load of Bolts on Laminated Veneer Lumber, Thesis Supervisions-undergraduate ,  ( )
  • Micro Programming for Structural Analysis Applications, Thesis Supervisions-undergraduate ,  ( )
  • Strength of Built-Up Timber Structures from Finite Element Methods Package (LUSAS), Thesis Supervisions-undergraduate ,  ( )
  • Glued-Laminated Timber from Meranti, Thesis Supervisions-undergraduate ,  ( )
  • "Ferrocement Box Beams Subjected to Pre-Bending Moment with Shear Force", Pertanika Journal of Science & Technology, UPM, 1997., Thesis Supervisions-undergraduate ,  ( )
  • "A Simplified Elastic Composite Floor Section Analysis with Incomplete Interaction", Journal Kejurutaraan UKM, 1996., Thesis Supervisions-undergraduate ,  ( )
  • Mat Lazim, "Rekabentuk Struktur Kayu Menurut MS 544", Dewan Bahasa Dan Pustaka, 1989., Book ,  ( )
  • Basic Load of Nails on Oil Palm Stem, Thesis Supervisions-undergraduate ,  ( )
  • Yield Line Load Method of Deriving the Basic Load of Bolts on Mengkulang, Thesis Supervisions-undergraduate ,  ( )
  • Built-Up Timber Beams using Bolts, Thesis Supervisions-undergraduate ,  ( )
  • Computer Programming for Designing Timber Structures, Thesis Supervisions-undergraduate ,  ( )
  • Finite Element Modelling of Precast Concrete Joints, Thesis Supervisions-undergraduate ,  ( )
  • Suitability of Oil Palm Trunk for Structural Applications- Strength Testing, Thesis Supervisions-undergraduate ,  ( )
  • Suitability of Oil Palm Trunk for Structural Applications- Joint Testing, Thesis Supervisions-undergraduate ,  ( )
  • Strength of Mechanical Timber Joints, Thesis Supervisions-undergraduate ,  ( )
  • Behavoiur of Timber Joints in a Group, Thesis Supervisions-undergraduate ,  ( )
  • Behavoiur of Solid and Glulam Timber Beams under Repeated Load and Fatigue, Thesis Supervisions-undergraduate ,  ( )
  • Fracture Mechanics of Timber, Thesis Supervisions-undergraduate ,  ( )
  • Flexural Properties of Glued-Laminated Timber Beams Fabricated in Accordance with the Revised MS758 and MS544, Thesis Supervisions-undergraduate ,  ( )
  • Computerized Procedures for Designing Glued-Laminated Timber Beams Based on the Revised MS544, Thesis Supervisions-undergraduate ,  ( )
  • Suitability of Composite Panels Made from Ferrocement and Polystyrene Connected by Bolts for use as Structural Elements, Thesis Supervisions-undergraduate ,  ( )
  • Suitability of Composite Panels Made from Polystyrene and Connected by Bolts for use as Structural Elements, Thesis Supervisions-undergraduate ,  ( )
  • Simulation of Composite Panels under Axial and Flexural Loads using Software Packages, Thesis Supervisions-undergraduate ,  ( )
  • Strength of Reinforced Concrete Beams Reinforced with Carbon Fibre Reinforced Polymer (CFRP) in Flexure, Thesis Supervisions-undergraduate ,  ( )
  • Computer Programming of Standard Methods for Analyzing, Thesis Supervisions-undergraduate ,  ( )
  • Behabiour of Ferrocement Sandwich Panel under Axial Loads, Thesis Supervisions-undergraduate ,  ( )
  • Behaviour of Ferrocement Sandwich Panel under Flexural Loads, Thesis Supervisions-undergraduate ,  ( )
  • Analysis and Design of Load Bearing Sandwich Panels, Thesis Supervisions-undergraduate ,  ( )
  • Fracture Mechanics Parameters for Malaysian Timbers, Thesis Supervisions-undergraduate ,  ( )
  • Analysis and Design of Shear Wall Structures for High Rise Structures, Thesis Supervisions-undergraduate ,  ( )
  • Effects of Repeated and Fatigue Loads on Reinforced High Strength Concrete Structures, Thesis Supervisions-undergraduate ,  ( )
  • Determination of Fracture Mechanics Parameters for Timber, Thesis Supervisions-undergraduate ,  ( )
  • Analysis and Design of Shear Wall Structures for High Rise Structures., Thesis Supervisions-undergraduate ,  ( )
  • Development of a Software in FORTRAN or C for the Design of Timber Structures, Thesis Supervisions-undergraduate ,  ( )
  • Progression of Crack Widths and Deflections of High Strength Reinforced Concrete Beams under Repeated Loadings, Thesis Supervisions-undergraduate ,  ( )
  • Deflections and Cracking of Crack Control Reinforced Concrete Beams under Repeated Loadings and Fatigue., Thesis Supervisions-undergraduate ,  ( )
  • Effects of Finger Joint Placement in Laminated Timber Beams., Thesis Supervisions-undergraduate ,  ( )
  • Design of Timber Structure using LUSAS., Thesis Supervisions-undergraduate ,  ( )
  • Development of a Software for the Design of Timber Structures., Thesis Supervisions-undergraduate ,  ( )
  • Structural Performance of Repaired R.C. Beams., Completed Dissertations-postgraduate ,  ( )
  • Strengthening of R.C Beams using Plate Bonding and End Anchors., Completed Dissertations-postgraduate ,  ( )
  • The use of Plastic Theory on Malaysian Timber Joints., Completed Dissertations-postgraduate ,  ( )
  • Critical Parameter Affecting the use of Tropical Hardwood in Structural Glued Laminated Lumber., Completed Dissertations-postgraduate ,  ( )
  • Suitability of using Laminated Veneer Lumber as a Structural Material, Completed Dissertations-postgraduate ,  ( )
  • Variation of Some Wood Properties and the Relationship to its Anatomical Properties., Completed Dissertations-postgraduate ,  ( )
  • A Study on Mechanical Performance & Durability of Coconut Fibre Reinforced Cement Composites with Silica Fume Admixtures., Completed Dissertations-postgraduate ,  ( )
  • A Study on Joints for Glued-Laminated Structures., Completed Dissertations-postgraduate ,  ( )
  • Fracture Mechanics Parameters for Malaysian Timbers, Thesis Supervisions-undergraduate ,  ( )
  • Strength of Screw Joints in Malaysian Timber, Thesis Supervisions-undergraduate ,  ( )
  • Embedment Strength of Malaysian Timbers, Thesis Supervisions-undergraduate ,  ( )
  • Evaluation for Professor Position of Dr Md. Abdul Mannan (UMP), Evaluation For Lecturer Promotion ,  (2012 - 2012)
  • Assessor for Promotion of Dr. Norhazilan bin Md Noor (UTM), Assessor For Lecturer Promotion ,  (2012 - 2012)
  • SCEM-2012-0402 for Journal of Civil Engineering and Management � Correlation Between CFRP Laminate Length and Crack Length for Flexural Retrofitting of Cracked RC Beam, Article In Journal ,  (2012 - 2012)
  • Manufacture and performance of Lightweight Aggregate from Municipal Solid Waste Incinerator Fly Ashes and Reservoir Sediment for Self-consolidation Lightweight Concrete. Construction and Building Materials, Article In Journal ,  (2012 - 2012)
  • PhD thesis evaluation of Syed, Zubair Imam (The University of Melbourne), Thesis ,  (2012 - 2012)
  • Evaluation for promotion of Dr. Syuhaida binti Ismail (UTM), Evaluation For Lecturer Promotion ,  (2012 - 2012)
  • ASEJ-D-12-00124 � Bonding Techniques for Flexural Strengthening of R.C. Beams Using CFRP Laminates- Ain Shams Engineering Journal, Article In Journal ,  (2012 - 2012)
  • Masters Thesis for Norhana Abdul Rahman (EC780 UiTM), Thesis ,  (2012 - 2012)
  • Masters Thesis evaluation of Emad Pournasiri Basti (USM), Thesis ,  (2012 - 2012)
  • CFENG-638-A New Practical Mechanical Prestressing System for Strengthening Reinforced Concrete Members by Using Carbon Fiber Reinforced Polymer (CFRP) Sheets- for the Journal of Performance of Constructed Facilities., Article In Journal ,  (2012 - 2012)
  • External Assessor for Lecturer Position of Dr. Phillip Visintin (University of Adelaide), Article In Journal ,  (2012 - 2012)
  • Member of Viva Board Sesssion for Arabi Nawwaf Saoud Al Qadi (PE20216 UNITEN), Thesis ,  (2012 - 2012)
  • Evaluation for Lecturer promotion of DR. DAVIDYEOH ENG GHUAN (UTHM), Evaluation For Lecturer Promotion ,  (2012 - 2012)
  • PhD thesis Evaluation of Sdr. Alireza Bahrami (UKM), Thesis ,  (2012 - 2012)
  • Malaysian Construction Research Journal (MCRJ) � Reviewer Appointment � �Case Study: Strength Variations of Koompassia Malaccensis Timber in Today�s Construction Industry�, Article In Journal ,  (2012)

CONTRIBUTION TO SOCIETY
(Contribution To Society), (Level), (Start Date), (End Date).


  • EAC Panel for the Accreditation of Bachelor of Engineering (Civil & Construction), Curtin University of Technology, , (University), 10/09/2012 until 11/09/2012
  • Interview panel for Yayasan Sultan Iskandar Johor , (Community), 17/07/2012 until 17/07/2012
  • Interview panel for Hadiah Latihan Persekutuan Pensyarah (HLP) Politeknik Dan Kolej Komuniti Bagi Tahun 2013 (26.06.2012), (Community), 26/06/2012 until 26/06/2012
  • Appointment as Judge for IIUM Research, Invention and Innovation Exhibition 2012 (IRIIE 2012), (University), 21/02/2012 until 22/02/2012
  • Naib Yang Di Pertua (P.I.B.G.-SMK USJ 4, Subang Jaya), (Community), 01/01/2006 until  
  • AJK (P.I.B.G.-Tunku Kurshiah College, Seremban), (Community), 01/01/2005 until  
  • Naib Yang Di Pertua (P.I.B.G.-Tunku Kurshiah College, Seremban), (Community), 01/01/2002 until 01/01/2005
  • AJK (P.I.B.G.-Tunku Kurshiah College, Seremban), (Community), 01/01/2001 until 01/01/2002
  • Naib Yang Di Pertua (P.I.B.G.-Sekolah Sri Selangor, Subang Jaya), (Local), 01/01/2001 until  
  • A.J.K (Masjid An-Nur, USJ 4, Subang Jaya), (Community), 01/01/1999 until  
  • Yang Di Pertua (P.I.B.G.-Tunku Kurshiah College, Seremban), (Community), 01/01/1994 until 01/01/1998

INTELLECTUAL PROPERTY RIGHTS
(Product Name), (Type), (Reference), (Year), (Level).


  • Special mix design to develop cementless geopolymer nonstructural lightweight concrete using palm oil fuel ash, PATENT, 10/06/2014, (NATIONAL)
  • A method of developing lightweight geopolymer structural grade concreate using slag, palm oil fuel ash and fly ash, PATENT, 10/06/2014, (NATIONAL)
  • A REINFORCING SYSTEM FOR A HOLLOW STRUCTURAL MEMBER AND A METHOD THEREOF, PATENT, PI 2012700851,  , (NATIONAL)
  • Oil Palm Kernel Shell Foamed Concrete (Palmcrete).(Applied for Patent). (Initial Search Completed)., PATENT, 12/08/2010, (NATIONAL)

SUPERVISION


POST GRADUATE STUDENT
(Name of Degree), (Name of Candidates), (Title of Thesis), (Academic Session)

Completed
  • Master Degree, Rasel Ahmmad, Engineering Properties Of Lightweight Concrete Containing High Volume Of Agricultural Wastes, 2012/2013
  • Master Degree, Iftekhair Ibnul Bashar, Evaluation Of Mechanical And Fracture Behaviour Of Pofa-Fa-Metakaolin Based Geopolymer Fibre Reinforced Concrete, 2012/2013
  • Doctoral Degree (phd), Arash Behnia, Strengthening Structural Elements For Load And Fatigue Using Advanced Techniques, 2012/2013
  • Doctoral Degree (phd), Mo Kim Hung, Investigation On The Long Term Properties Of Oil Palm Shell Concrete Using Moment Rotation Approach, 2012/2013
  • Master Degree, Michael Liu Yong Jing, Microstructure, Mechanical And Thermal Characteristics Of Foamed Geopolymer Concrete Using Fly Ash And Palm Oil Fuel Ash As Binders, 2012/2013
  • Master Degree, Ahmad Azim Bin Shukri, Mechanics Based Solution for Ductility of Reinforced Concrete Beams under Cyclic Loading, 2012/2013
  • Doctoral Degree (phd), Yap Soon Poh, Effect Of Fibres In Blast Resistant Property Of Oil Palm Kernel Shell Concrete, 2011/2012
  • Master Degree, Md. Akter Hosen, Structural Performance Of RC Beams Strengthened With NSM (Soffit And Side), 2011/2012
  • Doctoral Degree (phd), A.b.m. Saiful Islam, Nonlinear Dynamic Behaviour Of Fully Coupled Spar Platform, 2010/2011
  • Doctoral Degree (phd), Ramin Hosseini Kupaei, Effect Of Oil Palm Shell As Coarse Aggregate In The Development Of Fly Ash Based Geopolymer Concrete, 2010/2011
  • Master Degree, Baig Abdullah Al Muhit, Investigation On Microstructure, Thermal Conductivity And Aggregate Interlock Characteristic Of Oil Palm Shell Foamed Concrete, 2009/2010
  • Master Degree, Mohsen Kobraei, A Comparative Study Between Cfrp And Steel Shear Reinforcement Bars In Self - Compacting Reinforced Concrete Beams, 2009/2010
  • Master Degree, Muhammad Ashiqur Rahman, Eliminating Premature Shear Failure In Carbon Fibre Reinforced Polymer Laminate Flexurally Strengthened Reinforced Concrete Beams, 2009/2010
  • Master Degree, Tsen Shuk Fun, Determination Of Structural Properties Of Red Seraya Plywood Using Eurocodes Compliant Testing Method, 2009/2010
  • Doctoral Degree (phd), Md. Abdus Salam, Development Of Self-Consolidating High-Strength Concrete Incorporatiing Palm Oil Fuel Ash, 2009/2010
  • Doctoral Degree (phd), Payam Shafigh, Mechanical properties of high strength lightweight concrete containing oil palm shell, 2008/2009
  • Master Degree, Mohd Hafizan Bin Md. Isa, Self-Consolidating Concrete Incorporating Palm Oil Fuel Ash As A Supplementary Cementing Material, 2008/2009
  • Doctoral Degree (phd), Mohammad Mohammadhassani, Structural Behaviour Of High Strength Self Compacting Concrete Deep Beams, 2008/2009
  • Doctoral Degree (phd), Mohd Jamil Bin Abdul Wahab, Strength Assessment Of Structural Size Malaysia Timbers, 2008/2009
  • Doctoral Degree (phd), Kambiz Narmashiri, Carbon Fibre Reinforced Polymer Strips For Flexural And Shear Strengthening Of Steel I-Beams, 2007/2008
  • Doctoral Degree (phd), Seyed Vahid Razavi Tosee, Static and dynamic neural network modelling for reinforced concrete slab, 2007/2008
  • Doctoral Degree (phd), Md. Ashraful Alam, Enhancing The Performance Of Plate Bonded Flexurally Strengthened R.C Beams, 2006/2007
  • Master Degree, M.obaydullah, Repair of Reinforced Concrete Slabs, 2006/2007
  • Doctoral Degree (phd), Johnson U. Allengaram, Light Weight Aggregate Foamed Concrete, 2005/2006
  • Master Degree, Md. Ashraful Alam, Efects of end anchors on strengthened r.c. beams, 2004/2005
  • Master Degree, Humayun Kabir, Repair of r.c. beams, 2004/2005
  • Master Degree, Fadini Ahmad Razali, Embedment Strength of Malaysian Timbers, 2004/2005
  • Doctoral Degree (phd), Kartini Binti Kamaruddin, Mechanical, Time-Dependent And Durability Properties Of Grade 30 Rice Husk Ash Concrete, 2003/2004
  • Master Degree, Ahmad Hazim Abdul Rahim, Oil palm trunk for roof trusses, 2002/2003
  • Master Degree, Johari Othman, Oil palm trunk for structural application, 2001/2002
  • Master Degree, Bona Murty, Use of plastic theory on Malaysian timber joints, 2000/2001
  • Master Degree, Samer Nacer, Design, fabrication and testing of proposed precast beam-cplumn threaded rod connection system, 1997/1998
  • Master Degree, Wong Ee Ding, Suitability of using laminated veneer lumber as structural maerial., 1993/1994
  • Doctoral Degree (phd), Tan Yu Eng, Critical parameter affecting the use of tropical hardwood in structural glued laminated lumber., 1993/1994
  • Master Degree, Ismail Jusoh, variation pf some wood properties and the relationship to its strength., 1992/1993

Ongoing
  • Doctoral Degree (phd), Kh Mahfuz Ud Darain, Strengthening Structural Elements for Load and Fatigue Using Advanced Techniques, 2012/2013
  • Doctoral Degree (phd), Md. Moshiur Rahman, Hybridization And Opimization Of Structural Strengthening System For Reinforced Concrete Beams, 2010/2011
  • Doctoral Degree (phd), Hamid Sinaei, -, 2008/2009
  • Master Degree, Rohani Binti Mokhtar, Strengthening Structural Elements For Load And Fatigue Using Advanced Techniques, 2008/2009
  • Doctoral Degree (phd), Abdul Hadi Yusof, FRP for Concrete Strengthening, 2000/2001