PERSONAL DETAIL


DR. YOSE FACHMI BUYS

Senior Lecturer
Department of Mechanical Engineering
Faculty of Engineering
 
  yose@um.edu.my
 Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, W.Persekutuan Kuala Lumpur, Malaysia
 

ACADEMIC QUALIFICATION
(Qualification), (Institution).



PROFESSIONAL
(Organisation), (Role), (Year), (Level).


  • Society of Plastic Engineer, Member, 2015 to 2016, (International)
  • Board of Engineer Malaysia, Graduate Engineer, 2018, (National)

ADMINISTRATIVE DUTIES
(Role), (Level), (Start date),(End Date).


  • AJK Data dan Management Information, Pejabat Timbalan Dekan Penyelidikan, Faculty, 01/10/2019 to 30/09/2021
  • Timbalan Pengerusi Ahli Jawatan Kuasa Integrated Design Project (IDP), Faculty, 28/03/2019 to 26/03/2021

AREAS OF EXPERTISE
(Area).


  • Thermoplastic
  • Polymer Compounds
  • Composite Materials
  • Polymer Composites (Conductive Polymer Composites)
  • Plastics
  • Polymers


RECENT SELECTED PUBLICATIONS
(Publication).


Chapter in Book

2019
  • Anuar, H., Ali, F. B., Buys, Y. F., E’zzati, M. S. N., Salimah, A. S. M., Mahmud, M. S., Mohd Nordin, N., & Adli, S. A. (2019). Sustainable nanocomposites in food packaging. In Inamuddin, Thomas S., Kumar Mishra R., & Asiri A. (Eds), Sustainable Polymer Composites and Nanocomposites (pp. 413-436). Cham: Springer. 
Article in Academic Journals

2020
  • Alaei, I., Lee, Y. C., Ali Buraidah, M. H., Sopyan, I., Buys, Y. F. (2020). Optical and Electrical Properties of Polymer Blend Electrolyte Containing Sodium Carboxyl Methylcellulose, Poly (acrylamide-co-acrylic acid), and Sodium Sulfide. International Journal of Advanced Science and Technology, 29(7), 12241 - 12247. (Non-ISI/Non-SCOPUS)
  • Mohamed Haneef, I. N. M., Buys, Y. F., Shaffiar, N., Haris, N. A., Abdul Hamid, A. M., & Syed Shaharuddin, S. I. (in-press). Mechanical, Morphological, Thermal Properties and Hydrolytic Degradation Behaviour of Polylactic Acid/Polypropylene Carbonate (PLA/PPC) Blends Prepared by Solvent Casting. Polymer Engineering and Science. (ISI-Indexed)
  • Buys, Y. F., Ahmad, M. S., Anuar, H., Mahmud, M. S., & Nasir, N. A. M. (2020). Mechanical Properties, Morphology, and Hydrolytic Degradation Behavior of Polylactic Acid / Thermoplastic Polyurethane Blends. IIUM Engineering Journal, 21(1), 193-201. (SCOPUS-Indexed)
  • Nordin, N. M., Anuar, H, Buys, Y. F., Ali, F., Thomas, S., & Nasir, N. A. M. (in press). Effect of Freeze Dried Durian Skin Nanofiber on the Physical Properties of PLA Biocomposites. Polymer Composites. (ISI-Indexed)
  • Winatapura, D. S., Wisnu, A. A., Purwanto, S., & Buys, Y. F. (2020). Influence of La, Mn and Zn Substitution on the Structure, Magnetic and Absorption Properties of M-Type Barium Ferrites. Key Engineering Materials, 855, pp. 145-153. (SCOPUS-Indexed)
  • Anuar, H., Apandi, S. N. E. M., Rashid, S. M. S. A., Ali, F., Buys, Y. F., Manshor, M. R., Sabu, T., & Nasir, N. A. M. (2020). The Effects of Supercritical Carbon Dioxide on the Degradation and Antimicrobial Properties of PLA Biocomposite. IIUM Engineering Journal, 21(1), 212-227. (SCOPUS-Indexed)

2019
  • Sukirman, E., Sarwanto, Y., Insani, A., Adi, W. A., & Buys, Y. F. (2019). Weak Ferromagnetic Property and Electromagnetic Waves Absorption Characteristic of La (1-x) BaxMnO3. International Journal of Engineering Materials and Manufacture, 4(3), 96-106. (Non-ISI/Non-SCOPUS)
  • Haneef, I. N. H. M., Shaffiar, N., Buys, Y. F., & Hamid, A. M. A. (2019). Finite element analysis (FEA) of polylactic acid/polypropylene carbonate (PLA/PPC) blends fixation plate for craniomaxillofacial surgery. International Journal of Structural Integrity, 10(5), 678-691. (SCOPUS-Indexed)
  • Nordin, N. M., Buys, Y. F., Anuar, H., Ani, M. H., & Pang, M. M. (2019). Development of Conductive Polymer Composites from PLA/TPU Blends Filled with Graphene Nanoplatelets. Materials Today: Proceedings, 17, 500-507. (SCOPUS-Indexed)
  • Haneef, I. N. H. M., Buys, Y. F., Shaffiar, N. M., Shaharuddin, S. I. S., & Khairusshima, M. N. (2019). Miscibility, mechanical, and thermal properties of polylactic acid/polypropylene carbonate (PLA/PPC) blends prepared by melt-mixing method. Materials Today: Proceedings, 17, 534-542. (SCOPUS-Indexed)
  • Ramlan, A. H., Sirat, S., Ismail, E., Buys, Y. F., Purwanto, H., Mustafah, Y., Md Din, M. F., & Ani, M. H. (2019). Effects of hydrogen during annealing process of graphene synthesis via chemical vapor deposition. Materials Today: Proceedings, 7, 675-685. (SCOPUS-Indexed)
  • Rashid, S. M. S. A., Anuar, H., Apandi, S. N. E. Z. M., Buys, Y. F., & Hasan, N. A. (2019). Effects of plasticizer on mechanical properties of durian skin fiber reinforced polylactic acid biocomposite. In AIP Conference Proceedings (Vol. 2068, No. 1, p. 020007). (SCOPUS-Indexed)
  • Mahmud, M. S., Buys, Y. F., Anuar, H., & Sopyan, I. (2019). Miscibility, morphology and mechanical properties of compatibilized polylactic acid/thermoplastic polyurethane blends. Materials Today: Proceedings, 17, 778-786. (SCOPUS-Indexed)
  • Atiqah, M. N., Sharifah, I. S. S., Buys, Y. F.., Maizatulnisa, O., & Norhashimah, S. (2019). Characterization of poly (lactic acid)/poly (ethylene) glycol blends prepared for melt drawn spinning process. Materials Today: Proceedings, 17, 889-897. (SCOPUS-Indexed)

2010
  • Buys, Y. F., Aoyama, T., Akasaka, S., Asai, S., & Sumita, M. (2010). Utilization of polymer degradation to modify electrical properties of poly (l-lactide)/poly (methyl methacrylate)/carbon filler composites. Composites science and technology, 70(1), 200-205. (ISI-Indexed)

2005
  • Katada, A., Buys, Y. F., Tominaga, Y., Asai, S., & Sumita, M. (2005). Resistivity control in the semiconductive region for carbon-black-filled polymer composites. Colloid and Polymer Science, 283(4), 367-374. (ISI-Indexed)
  • Katada, A., Buys, Y. F., Tominaga, Y., Asai, S., & Sumita, M. (2005). Relationship between electrical resistivity and particle dispersion state for carbon black filled poly (ethylene-co-vinyl acetate)/poly (L-lactic acid) blend. Colloid and Polymer Science, 284(2), 134-141. (ISI-Indexed)

AREAS OF RESEARCH
(Project title), (Role), (From)-(Until), (Level), (Source).


  • Innovative Approach In Converting Mixed Plastic Waste Into Fuel Via Microwave Assisted Spark Pyrolysis Process To Increase Efficency And Yield, Consultant, 2019 - 2021, Others MOHE - Top 100 (IIRG)-IISS, (National)
  • Effects Of Nanofiller' Shape And Surface Chemistry On Beta Phase Formation And Piezoelectric Performance In Electrospun Polyvinylidene Fluoride Based Nanocomposites, Principal Investigator(PI), 2019 - 2022, RU Geran - Fakulti Program, (National)
  • Poly (3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) doped Silver Nano Particle (SNP) conductive polymer film for pressure ulcer prevention, Co-Investigator, 2019 - 2021, Fundamental Research Grant Scheme (FRGS), (National)
  • Microcellular Polylactic Acid Biocomposite Foam via Supercritical Carbon Dioxide for Single Use Packaging, Co-Investigator, 2019 - 2021, Fundamental Research Grant Scheme (FRGS), (National)
  • Unravelling Catalytic Mechanism Of High Entropy Alloys (heas) For Energy Efficient Azo Dye Removal In Fenton Reaction, Co-Investigator, 2019 - 2022, Fundamental Research Grant Scheme (FRGS), (National)

EVALUATION ACTIVITIES
(Description), (Evaluation Activity),(Year).


  • Reviewer for Materials Today Proceeding, Article In Proceeding ,  (2020 - 2020)
  • External Examiner for Mr Fida Muhammad, one PhD candidate from Department of Physics, Abdul Wali Khan University Mardan, Pakistan, Thesis ,  (2020 - 2020)
  • Reviewer for the special issue of International Journal of Recent Technology and Engineering (IJRTE), consist of papers that were presented at 4th International Conference on Advances in Manufacturing & Materials Engineering 2019 (ICAMME 2019) - Paper ID 118., Article In Proceeding ,  (2019 - 2019)
  • Reviewer for the special issue of International Journal of Recent Technology and Engineering (IJRTE), consist of papers that were presented at 4th International Conference on Advances in Manufacturing & Materials Engineering 2019 (ICAMME 2019) - Paper ID 114., Article In Proceeding ,  (2019 - 2019)

CONTRIBUTION TO SOCIETY
(Contribution To Society), (Level), (Start Date), (End Date).


  • Judge at Center for Advanced Materials (CAM) Postgraduate Symposium, University of Malaya, (University), 19/12/2019 until 19/12/2019
  • Judge at Capstone Design Competition of Department of Mechanical Engineering, Universiti Tenaga Nasional , (Community), 28/08/2019 until 28/08/2019
  • Judge at 12th EURECA International Engineering Research Conference at Taylor's University, (Community), 03/07/2019 until 04/07/2019
  • Judge for Final Stage of Materials Lecture Competition at International Islamic University Malaysia, (Community), 21/02/2019 until 21/02/2019
  • Facilitator at Undergraduate Research Fellowship Bootcamp, (University), 16/02/2019 until 17/02/2019

SUPERVISION


POST GRADUATE STUDENT
(Name of Degree), (Name of Candidates), (Title of Thesis), (Academic Session)

Completed
  • Master Degree, Mudrikah Sofia Binti Mahmud, Miscibility, Mechanical Properties, and Degradation Behaviour of Polylactic Acid / Thermoplastic Polyurethane Blends Compatibilized by EMA-GMA, 2018/2019
  • Master Degree, Nurfarahin Mohd Nordin, Development of Conductive Polymer Composites from PLA/TPU Blends Filled with Graphene Nanoplatelets, 2018/2019
  • Master Degree, Intan Najwa Humaira Binti Mohamed Haneef, Characterization and Finite Element Analysis of Polylactic Acid/Polypropylene Carbonate (PLA/PPC) for Fixation Plate in Mandibular Surgery, 2018/2019
  • Master Degree, Siti Munirah Salimah Binti Abd Rashid, Development and Characterization of Plasticized Polylactic Acid Biocomposite with Durian Skin Fiber for Food Packaging Application, 2018/2019
  • Master Degree, Siti Nur E'zzati Binti Mohd Apandi, Supercritical Fluid Aided Polylactic Acid Biocomposite Film with Cinnamon Essential Oil for Active Food Packaging, 2018/2019
  • Master Degree, Amir Hakimi Bin Ramlan, A Study on The Effects of Gas Composition and Biased Substrate Towards the Quality of CVD Grown Graphene, 2018/2019
  • Master Degree, Habibah Farhana Binti Abdul Guthoos, Characterization of Reduced Graphene Oxide Conductive Polymer Composites towards the Development of Non-invasive Glucose Biosensors, 2017/2018

Ongoing
  • Doctoral Degree (phd), Nurfarahin Binti Mohd Nordin, Microcellular Polylactic Acid Biocomposite Foam via Supercritical Carbon Dioxide for Single Use Packaging, 2019/2020
  • Master Degree, Nur Atiqah Binti Mohd Akhir, Processing and Characterization of PLA / PEG / Curcumin Fiber by Melt Spinning Method, 2019/2020
  • Doctoral Degree (phd), Iraj Alaei, Development of Amorphous Silicon (a-Si) Polymer Thin Film Junction for Photovoltaic Applications, 2019/2020
  • Master Degree, Ramizah Binti Rozaimay, INVESTIGATION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES ON JOINING STAINLESS STEEL TO COPPER WITH ADDITION OF POROUS AS INTERLAYER, 2019/2020
  • Doctoral Degree (phd), Intan Najwa Humaira Bt. Mohamed Haneef, Characterization and Finite Element Analysis of HNT Reinforced PLA/PPC for Fixation Plate in Mandibular Surgery, 2019/2020
  • Doctoral Degree (phd), Nur 'aishah Binti Ahmad Shahrim, Poly (3,4-Ethylenedioxythiophene) :Poly (Styrene Sulfonate) (PEDOT:PSS) Doped by Silver Nano Particle (SNP) Conductive Polymer Film for Pressure Ulcer Prevention, 2019/2020
FIRST DEGREE/DIPLOMA/PRE-DEGREE
(Course Title), (Academic Session), (No. of Candidates)

Completed
  • Final Year Project, 2019/2020, 2
  • Integrated Design Project (1 group = 4 students), 2019/2020, 4

Ongoing
  • FInal Year Project, 2020/2021, 4
  • Integrated Design Project, 2020/2021, 5

TEACHING
(Course Title), (Academic Session), (No of Student), (No of Contact Hours).


FIRST DEGREE
  • ENGINEERING MATERIALS, 2020/2021(1), 45, 118
  • COMPOSITE MATERIALS, 2019/2020(1), 7, 80.5
  • MATERIALS AND PROCESSES IN SEMICONDUCTOR MANUFACTURING, 2019/2020(1), 4, 80.5
  • ENGINEERING THERMODYNAMICS, 2019/2020(2), 56, 122
  • INTERGRATED PROJECT DESIGN, 2019/2020(2), 1, 120
  • MATERIALS AND PROCESSES IN SEMICONDUCTOR MANUFACTURING, 2019/2020(2), 24, 80.5
  • MECHANICAL BEHAVIOUR AND FAILURE OF MATERIALS, 2018/2019(2), 1, 120