Curriculum Vitae

PROFESSOR IR. DR. YAU YAT HUANG

Professor
  • Department of Mechanical Engineering
    Faculty of Engineering
  • yhyau
  • +603-79675210

BIOGRAPHY


Professor Ir. Dr. Yau Yat Huang obtained a Bachelor of Science in Mechanical Engineering, Cum Laude Honors degree, in 1994 from Wichita State University, Kansas, USA, and a Master of Science in Mechanical Engineering in 1996 from the University of Science Malaysia, Penang, Malaysia. Professor Dr. Yau obtained his DOCTOR OF PHILOSOPHY in Mechanical Engineering in 2005 from the University of Canterbury, Christchurch, New Zealand. He was a prestigious NZAID (New Zealand Agency of International Development) PhD scholar from 2001 to 2004 at the University of Canterbury, Christchurch, New Zealand.

Ir. Dr. Yau is also the Carter Bronze Medal holder of the Chartered Institution of Building Services Engineers, United Kingdom (CIBSE), for the years 2013 and 2015. He is a well-known international M&E Engineering expert and has been practicing as an M&E engineer for the past thirty years. He has also published numerous technical papers in reputable thermal science and mechanics journals, such as the International Journal of Refrigeration, Indoor Air, Applied Thermal Engineering, International Journal of Thermal Science, International Journal of Energy Research, Applied Mechanics Reviews, Energy and Buildings, Journal of Mechanical Engineering Science, Building and Environment, International Communications in Heat and Mass Transfer, International Journal of Heat and Mass Transfer, Experimental Heat Transfer, Renewable and Sustainable Energy Reviews, Indoor and Built Environment, Building Services Engineering Research & Technology of CIBSE, and Polymer Testing.

Professor Yau is listed as one of the World's top 2% Scientists Career-Long Citation Impact, as well as one of the top 2% Scientists for the years 2019, 2022 and 2023 by Stanford University. Ir. Dr. Yau is a Professor in Mechanical Engineering at the Department of Mechanical Engineering, University of Malaya. He is currently the Principal Researcher and Coordinator at the well-known UM-Daikin Laboratory and also the Principal Researcher and Coordinator for the UM-JAF (Japan Air Filter) Laboratory.

Professor Yau was the former Associate Editor of the Journal of Indoor and Built Environment from 2012 to 2017. Additionally, Ir. Dr. Yau was the Head of Department of Mechanical Engineering at the University of Malaya from 2009 to 2011, and the Deputy Dean (Development) from 2011 to 2012 at the Faculty of Engineering. Furthermore, Professor Yau is a registered mechanical Professional Engineer with a Practising Certificate in Malaysia [PEPC] and a Chartered Professional Engineer in Australia [FIEAust, CPEng, NER]. He is also a registered mechanical professional engineer with APEC and EMF (International Professional Engineer), and a Fellow corporate member of the Institution of Engineers, Malaysia (FIEM) and the Institution of Engineers, Australia (FIEAust). He is a full member of the American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc. (ASHRAE), and a life member of the Tau Beta Pi and Golden Key scholastic honor societies of the USA.

AREAS OF EXPERTISE


  • AIR-CONDITIONING AND REFRIGERATION
    M&E Engineering; HVAC&R Engineering; Green Building Study in the Tropics; Thermal Systems Simulation Using TRNSYS; Energy Savings in Buildings; IEQ Engineering; FEA, CAD & CAM Engineering.

ACADEMIC QUALIFICATION


  • Professional Engineer Practising Certificate, (Mekanikal)
    Lembaga Jurutera Malaysia
  • FELLOW Institution of Engineers (FIEAust)(2014), (CHARTERED PROFESSIONAL ENGINEER)
    Institute of Engineers, Australia
  • CPEng(Australia)(2014), (Mechanical Engineering)
    Institution of Engineers, Australia
  • FELLOW (FIEM) (2012), (M&E Engineering)
    Institution of Engineers Malaysia
  • MASHRAE, (Heating,Ventilation, Air Conditioning & Refrigeration)
    American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc.
  • PhD (NEW ZEALAND)(2005), (HVAC & R)
    Canterbury University, New Zealand
  • MSc(1996) (USM), (CAD/CAM and FEA)
    Universiti Sains Malaysia (USM)
  • BSc(1994) (US), (MECHANICAL ENGINEERING)
    Wichita State University, Wichita

ADMINISTRATIVE DUTIES


  • Committee Members
    10 Jan 2024 - 31 Dec 2026 (Department of Mechanical Engineering, Faculty of Engineering)
  • Coordinator of UM-Daikin Laboratory
    01 Dec 2022 - 30 Nov 2025 (Department of Mechanical Engineering, Faculty of Engineering)
  • Supervisor
    25 Nov 2022 - 31 Dec 2024 (Department)
  • Supervisor
    25 Nov 2022 - 31 Dec 2024 (Department)
  • Coordinator
    01 Jan 2024 - 31 Dec 2024 (Department of Mechanical Engineering, Faculty of Engineering)
  • Coordinator
    01 Jan 2024 - 31 Dec 2024 (Department of Mechanical Engineering, Faculty of Engineering)
  • EAC Advisor Panel
    02 Jul 2015 - present (Department of Mechanical Engineering, Faculty of Engineering)
  • PAKAR PERUNDING BAGI KERJA-KERJA PEMASANGAN SISTEM LOCAL EXHAUST VENTILATION (LEV) DI MAKMAL ANATOMI MANUSIA, JABATAN ANATOMI, FAKULTI PERUBATAN
    01 Jul 2024 - 01 Oct 2024 (University Malaya)
  • Course Coordinator
    18 Mar 2024 - 23 Aug 2024 (Department)
  • Coordinator
    09 Oct 2023 - 03 Mar 2024 (Faculty)
  • Committee Members
    25 Oct 2022 - 31 Dec 2023 (Department)
  • Supervisor
    25 Nov 2022 - 31 Dec 2023 (Department)
  • Committee Members
    25 Oct 2022 - 24 Oct 2023 (University Malaya)
  • Committee Members
    06 Oct 2020 - 31 Dec 2022 (University Malaya)
  • Supervisor
    01 Sep 2020 - 31 Dec 2022 (Department)
  • Coordinator
    29 Jun 2016 - 31 Dec 2022 (Department of Mechanical Engineering, Faculty of Engineering)
  • Representative (FKUM) - Collaboration between UM - JAF SDN BHD
    01 Mar 2019 - 28 Feb 2022 (Dean Office, Faculty of Engineering)
  • Committee Member (AJK Tapisan Pelantikan)
    01 Oct 2019 - 30 Sep 2021 (Department of Mechanical Engineering, Faculty of Engineering)
  • Advisor for ASHRAE Run
    01 Sep 2020 - 31 Aug 2021 (Dean Office, Faculty of Engineering)
  • Coordinator for KXEX2166 (Law and Engineer)
    12 Oct 2020 - 31 Mar 2021 (Dean Office, Faculty of Engineering)
  • Committee Member (Shortlisting Committee of the Promotion of Associate Professor and Professor, Faculty of Engineering)
    01 Feb 2019 - 31 Jan 2021 (Dean Office, Faculty of Engineering)
  • Coordinator for KIX2003 (Law and Ethics in Engineering)
    01 Sep 2018 - 31 Dec 2020 (Department of Mechanical Engineering, Faculty of Engineering)
  • UM-QMEC Assessor
    01 Jan 2020 - 31 Dec 2020 (University Malaya)
  • PANEL FOR BOARD OF EXAMINERS MEETING FOR GAN YONG YANG (17006573/2, KVA170027)
    26 Nov 2020 - 26 Nov 2020 (Department of Mechanical Engineering, Faculty of Engineering)
  • PANEL FOR 2ND NOTICE OF BOARD OF EXAMINERS MEETING FOR MAHDIEH ZAMZAMZADEH (KHA120037)
    16 Jul 2020 - 16 Jul 2020 (Dean Office, Faculty of Engineering)
  • Panel - MQA Malaysia
    01 Jul 2017 - 01 Jul 2020 (National)
  • CHAIRMAN OF THE BOARD OF EXAMINERS MEETING FOR MUNIR AZAM MUHAMMAD (KHA160002)
    06 May 2020 - 06 May 2020 (Dean Office, Faculty of Engineering)
  • PANEL FOR THE BOARD OF EXAMINERS MEETING FOR VIVA-VOCE SESSION OF MASTER OF ENGINEERING SCIENCE (BY RESEARCH) - OOI XIAN YIH - (KGA180045)
    07 Apr 2020 - 07 Apr 2020 (Department of Mechanical Engineering, Faculty of Engineering)
  • Panel for FRGS Grant (UM) - 2020
    05 Mar 2020 - 16 Mar 2020 (University Malaya)
  • Committee Member (Grant Evaluation of Ministry of Education, Malaysia)
    18 Apr 2019 - 31 Dec 2019 (National)
  • Committee Member (Pre-Board Meeting JKM)
    01 Jan 2019 - 31 Dec 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • PANEL FOR THE BOARD OF EXAMINERS MEETING FOR MAHDIEH ZAMZAMZADEH (KHA120037)
    21 Oct 2019 - 21 Oct 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • CHAIRMAN OF THE BOARD OF EXAMINERS MEETING FOR LEI ZHEN CE (KHA150022)
    26 Jul 2019 - 26 Jul 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • PANEL: UNIVERSITY OF MALAYA IMPACT-ORIENTED INTERDISCIPLINARY RESEARCH GRANT PROGRAMME (IIRG) CYCLE 2/2019
    15 Jul 2019 - 22 Jul 2019 (University Malaya)
  • PANEL FOR THE VIVA-VOCE SESSION MASTER OF ENGINEERING SCIENCE (BY RESEARCH) - PRAVINAH NAIR A/P SHASIDHARAN (KGA160013)
    12 Jul 2019 - 12 Jul 2019 (Dean Office, Faculty of Engineering)
  • Panel of Faculty Research Grant 2/2019
    24 Jun 2019 - 25 Jun 2019 (Deputy Dean (Research) Office, Faculty of Engineering)
  • Panel for Faculty Research Grant 2/2019
    24 Jun 2019 - 25 Jun 2019 (Dean Office, Faculty of Engineering)
  • CHAIRMAN OF THE VIVA-VOCE SESSION MASTER OF ENGINEERING - SHAHIDAH NUSAILAH BINTI RASHID (KGA160021)
    31 May 2019 - 31 May 2019 (Dean Office, Faculty of Engineering)
  • CHAIRMAN OF THE BOARD OF EXAMINERS MEETING FOR KHAW HUI YING (KHA150019)
    07 May 2019 - 07 May 2019 (Dean Office, Faculty of Engineering)
  • Committee Member, Library, University of Malaya
    11 Apr 2016 - 10 Apr 2019 (University Malaya)
  • Panel for FRGS Grant (UM)
    11 Mar 2019 - 12 Mar 2019 (University Malaya)
  • PANEL: UNIVERSITY OF MALAYA IMPACT-ORIENTED INTERDISCIPLINARY RESEARCH GRANT PROGRAMME (IIRG) 2019-2021
    08 Mar 2019 - 09 Mar 2019 (University Malaya)
  • Panel For FRGS Grant (Cycle 1) 2019
    22 Feb 2019 - 05 Mar 2019 (Deputy Dean (Research) Office, Faculty of Engineering)
  • Chairman of the OF BOARD OF EXAMINERS MEETING FOR MOHAMMAD MAHDI SHAFIEI (KHA110118)
    12 Feb 2019 - 12 Feb 2019 (Dean Office, Faculty of Engineering)
  • Chief Exam Invigilator (Dewan 3, 15:00, 04/01/2019)
    04 Jan 2019 - 04 Jan 2019 (University Malaya)
  • Committee Member, Special Committee, Department of Mechanical Engineering, University of Malaya
    01 Sep 2016 - 31 Dec 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Chairman for Board of Examiners' meeting for Mohamad Syafie bin Mahmood (KHA140032)
    04 Sep 2018 - 04 Sep 2018 (Dean Office, Faculty of Engineering)
  • BOARD OF EXAMINERS' MEETING FOR Norasikin Binti Ahmad (KGA150017)
    15 Aug 2018 - 15 Aug 2018 (Dean Office, Faculty of Engineering)
  • BOARD OF EXAMINERS' MEETING FOR Loo Zhi Zhen (KGA140055)
    10 Aug 2018 - 10 Aug 2018 (Dean Office, Faculty of Engineering)
  • CHAIRMAN FOR BOARD OF EXAMINERS' MEETING FOR YUSHAIZAD BIN YUSOF (KHA060013)
    31 Jul 2018 - 31 Jul 2018 (Dean Office, Faculty of Engineering)
  • CHAIRMAN FOR BOARD OF EXAMINERS' MEETING FOR OMID HADDAD (KHA100052)
    02 Jul 2018 - 02 Jul 2018 (Dean Office, Faculty of Engineering)
  • FRGS Evaluation Panel
    01 Mar 2018 - 30 Jun 2018 (University Malaya)
  • PIC(Engineering)-Memorandum of Understanding (MoU) & Student Exchange Programme Agreement (SEPA) Between Universiti Malaya (UM) and Shandong University, China
    29 Jun 2015 - 28 Jun 2018 (University Malaya)
  • Head of PR for Professional Bodies
    01 Apr 2015 - 30 Mar 2018 (Dean Office, Faculty of Engineering)
  • Panel for Bachelor of Computer Science (Data Science)
    13 Mar 2018 - 28 Mar 2018 (University Malaya)
  • Evaluation Panel for FRGS Grant 2017
    01 Jan 2017 - 31 Dec 2017 (University Malaya)
  • Professor Representative for Higher Degree Committee
    20 Aug 2015 - 31 Aug 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Member for Pra-Jawatankuasa Pemeriksa Peringkat Jabatan/Pre-Committee meeting Examiner
    01 Jan 2013 - 31 Aug 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Curriculum Review Committee Member (Programme of Mechanical Engineering)
    01 Mar 2017 - 31 Aug 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Course Coordinator for KXEX2165 -MORAL AND ETHICS OF ENGINEERING PROFESSION
    01 Sep 2016 - 31 Aug 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Quality Manager
    09 Oct 2014 - 31 Aug 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Member for Committee of Industrial Lab Opening Ceremony
    29 Aug 2016 - 28 Aug 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee member, Purchase Committee for Fujitec Elevator at Wisma R&D
    03 May 2016 - 02 May 2017 (University Malaya)
  • Committee Member, Purchase Committee for Chiller Systems for UM Library
    03 May 2016 - 02 May 2017 (University Malaya)
  • Checker for Self-Assessment Report (SAR)
    23 Nov 2016 - 30 Apr 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Panel for Board of Examiner s meeting for Mohd Bakar Bin Mohd Mishani (KGA130069)
    18 Apr 2017 - 18 Apr 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Panel for Board of Examiner s meeting for Mohamed Bashir Ali Bashir (KHA120090)
    04 Apr 2017 - 04 Apr 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Panel for Board of Examiner s meeting for Ali Shahir Shawkat (KGA120050)
    31 Mar 2017 - 31 Mar 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Panel for Board of Examiner s meeting for Mohammad Jakir Hossain Khan (KHA110038)
    13 Mar 2017 - 13 Mar 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Panel of BOARD OF EXAMINERS MEETING FOR SAMIR HASSANI (KHA130044)
    17 Feb 2017 - 17 Feb 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Panel for BOARD OF EXAMINERS MEETING FOR - MD SAZZAD HOSSAIN (KGA140033)
    19 Jan 2017 - 19 Jan 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • PANEL MEMBER OF THE BOARD OF EXAMINERS MEETING FOR - JUWEL CHANDRA MOJUMDER (KGA140027)
    06 Dec 2016 - 06 Dec 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • PANEL MEMBER OF THE BOARD OF EXAMINERS MEETING FOR - ABDUL SYAKIR BIN ABDUL MUBIN (KGA130012)
    06 Dec 2016 - 06 Dec 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • PANEL MEMBER OF THE BOARD OF EXAMINERS MEETING FOR - JACKY LEE JIA LI (KGA140034)
    14 Nov 2016 - 14 Nov 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • PANEL MEMBER OF THE BOARD OF EXAMINERS MEETING FOR - MOAYAD HANI YACOUB ABU RMILAH (KGA130023)
    07 Sep 2016 - 07 Sep 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • CHAIRMAN OF THE BOARD OF EXAMINERS MEETING FOR SYAHIRAH BINTI ABD HALIM (KHA110088)
    26 Jul 2016 - 26 Jul 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Panel Member of BOARD OF EXAMINERS MEETING FOR RASHEDUL HASAN KHONDAKAR (KGA130077)
    23 Jun 2016 - 23 Jun 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Acting Head of Department
    06 May 2016 - 06 May 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • CHAIRMAN OF BOARD OF EXAMINERS MEETING FOR NGUYEN HUU THO (KHA110045)
    07 Apr 2016 - 07 Apr 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Panel Member of BOARD OF EXAMINERS MEETING FOR TAN SOON SEIN (KGA130038)
    07 Apr 2016 - 07 Apr 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Panel Member of BOARD OF EXAMINERS MEETING FOR MOHAMMAD ASHRAFUL ALAM (KGA130006)
    31 Mar 2016 - 31 Mar 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • CHAIRMAN OF BOARD OF EXAMINERS MEETING FOR BILAL MOUNEIR SAEED EID (KHA110061)
    07 Mar 2016 - 07 Mar 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Member for Jawatankuasa PENILAIAN PERMOHONAN SKIM SANGKUTAN JURUTERA
    01 Jan 2013 - 31 Jan 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • FRGS Grant Panel 2015
    01 Jan 2015 - 31 Dec 2015 (University Malaya)
  • Committee Member for "Teknikal dan Spesifikasi dan AJK Penilaian Harga Bagi Perolehan Mobile Dental Clinic, Fakulti Pergigian"
    03 Mar 2014 - 31 Dec 2015 (University Malaya)
  • Coordinator of Daikin R&D-UM Lab
    01 Jan 2015 - 31 Dec 2015 (Faculty)
  • PANEL PENILAI BAGI PENGURUSAN PENYELIDIKAN UNIVERSITI MALAYA [UM.C/TNC2/241/24/21/2]
    01 Jan 2015 - 31 Dec 2015 (University Malaya)
  • CHAIRMAN OF BOARD OF EXAMINERS MEETING FOR NG YEE SERN (KHA120057)
    29 Dec 2015 - 29 Dec 2015 (Faculty)
  • Acting Head of Department
    16 Nov 2015 - 18 Nov 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Acting Head of Department
    21 Sep 2015 - 23 Sep 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • CHAIRMAN OF BOARD OF EXAMINERS MEETING FOR MOHAMAD FAIZAL BIN TAJUL BAHARUDDIN (KHA080001)
    14 Sep 2015 - 14 Sep 2015 (Faculty)
  • CHAIRMAN OF BOARD OF EXAMINERS MEETING FOR KOK GIN XIAN (KHA100003)
    04 Sep 2015 - 04 Sep 2015 (Faculty)
  • FRGS Evaluator
    01 Jan 2014 - 31 Dec 2014 (National)
  • Director (Mechanical Engineering), UPUM SDN BHD.
    01 Jan 2013 - 31 Dec 2014 (University Malaya)
  • Committee Member for JAWATANKUASA PEMERIKSA BAGI SEMESTER KHAS, SESI 2013/2014 (MEng)
    01 Jan 2013 - 31 Dec 2014 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Member for CANDIDATURE DEFENSE FACULTY OF ENGINEERING UNIVERSITY OF MALAYA
    25 Sep 2013 - 31 Dec 2014 (Department of Mechanical Engineering, Faculty of Engineering)
  • Director(Mechanical Engineering)for UPUM Sdn Bhd
    01 Jan 2010 - 31 Dec 2013 (University Malaya)
  • Committee Member for Jawatankuasa Task Force Bagi Pelan Strategik UM Untuk Perancangan Infrastruktur, Pembangunan dan Kajian Semula
    01 Jan 2013 - 31 Dec 2013 (University Malaya)
  • Deputy Dean
    01 Jul 2011 - 29 Feb 2012 (Dean Office, Faculty of Engineering)
  • Committee Member for the evaluation of price for the XRD machine
    01 Jan 2012 - 31 Dec 2012 (Department of Mechanical Engineering, Faculty of Engineering)
  • Wakil Dekan Mesyuarat JK Tetap Kewangan UM
    01 Jul 2011 - 29 Feb 2012 (University Malaya)
  • Ketua, Unit Pembangunan, Perkhidmatan & Teknologi Maklumat
    01 Jul 2011 - 29 Feb 2012 (Faculty)
  • Wakil Dekan Mesyuarat JK Vot H UM
    01 Jul 2011 - 29 Feb 2012 (University Malaya)
  • Ahli Jawatankuasa Penyelaras Keselamatan dan Kesihatan Pekerjaan UM (JAKPUM)/Fire drill
    01 Jul 2011 - 29 Feb 2012 (University Malaya)
  • Pengerusi JK Keselamatan dan Kesihatan Pekerjaan Fakulti Kejuruteraan(JKKP)
    01 Jul 2011 - 29 Feb 2012 (Faculty)
  • Deputy Dean of Development
    01 Jul 2011 - 29 Feb 2012 (Faculty)
  • Pengerusi Mesyuarat Lembaga Pemeriksa Pelupusan Harta UM (>RM5,000 untuk pelupusan)
    01 Jul 2011 - 29 Feb 2012 (University Malaya)
  • Quality Manager
    01 Jul 2011 - 29 Feb 2012 (Faculty)
  • Head of Department
    01 Sep 2009 - 30 Jun 2011 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Member for Exam Scripts Moderation
    01 Jan 2005 - 31 Dec 2011 (Department of Mechanical Engineering, Faculty of Engineering)
  • Acting Dean, Faculty of Engineering
    20 Oct 2011 - 21 Oct 2011 (University Malaya)
  • Head of Department
    01 Sep 2009 - 30 Jun 2011 (Department of Mechanical Engineering, Faculty of Engineering)
  • Acting Dean, Faculty of Engineering
    16 Jun 2011 - 17 Jun 2011 (University Malaya)
  • Committee Member for Departmental Examiners Committee
    01 Jan 2004 - 31 Dec 2009 (Department of Mechanical Engineering, Faculty of Engineering)
  • Chairman for Departmental EAC Committee
    01 Jan 2007 - 31 Dec 2009 (Department of Mechanical Engineering, Faculty of Engineering)
  • OBE Committee Member
    19 Jan 2005 - 31 Dec 2009 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Member for Higher Degree Committee
    01 Jan 2005 - 31 Dec 2009 (Department of Mechanical Engineering, Faculty of Engineering)
  • OBE (Outcome Base Education) Coordinator
    01 Jan 2005 - 31 Aug 2009 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Member for P.Eng. Promotion Committee
    12 Feb 2009 - 30 Jun 2009 (Department of Mechanical Engineering, Faculty of Engineering)
  • Warden for Level 8, Engineering Tower & Rescue Warden for Faculty of Engineering
    01 Jan 2004 - 31 Dec 2008 (Department of Mechanical Engineering, Faculty of Engineering)
  • Acting Head of Department
    18 Aug 2008 - 20 Aug 2008 (Department of Mechanical Engineering, Faculty of Engineering)
  • Supervisor, Heat Engine Lab
    01 Jul 2006 - 31 Dec 2007 (Department of Mechanical Engineering, Faculty of Engineering)
  • Ad-Hoc Committee Member for Evaluation of M&E Consulting Firms
    01 Apr 2005 - 31 Dec 2006 (University Malaya)
  • Acting Head of Department
    19 Oct 2006 - 03 Nov 2006 (Department of Mechanical Engineering, Faculty of Engineering)
  • Dean Representative
    17 Apr 2006 - 18 Apr 2006 (Department of Mechanical Engineering, Faculty of Engineering)
  • Dean Representative
    23 Mar 2006 - 23 Mar 2006 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Member for 2000/01 Session Admission Committee
    01 Jan 2000 - 01 Jan 2001 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Member (Substitute) for Domestic Appliances Energy Efficiency Working Group
    01 Jan 1999 - 01 Jan 2001 (University Malaya)
  • Committee Member (Substitute) for Technical Committee on Boiler and Pressure Vessel
    01 Jan 1999 - 01 Jan 2001 (University Malaya)
  • Lab Supervisor, Air Conditioning & Refrigerating Lab
    01 Jan 1998 - 01 Jan 2001 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Member for Departmental Examiners Committee
    01 Jan 1997 - 01 Jan 2001 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Member for Department Brochure & Information Preparation Committee
    01 Jan 2000 - 01 Jan 2001 (Department of Mechanical Engineering, Faculty of Engineering)
  • Coordinator for Seminars & Courses
    01 Jan 1998 - 01 Jan 2000 (Department of Mechanical Engineering, Faculty of Engineering)
  • Coordinator for Mechanical Engineering Department Brochure Preparation Work
    01 Jan 1998 - 01 Jan 2000 (Department of Mechanical Engineering, Faculty of Engineering)
  • RM7 IRPA Project Application Technical Evaluation Committee
    01 Jan 1999 - 31 Dec 1999 (University Malaya)
  • Assistant Lab Supervisor, Air Conditioning & Refrigerating Lab
    01 Jan 1997 - 01 Jan 1998 (Department of Mechanical Engineering, Faculty of Engineering)
  • Acting Head of Department
      -   (Department of Mechanical Engineering, Faculty of Engineering)

MEMBERSHIPS


  • INSTITUTION OF ENGINEERS, AUSTRALIA (IEAUST) OR ENGINEERS AUSTRALIA (EA), FELLOW MEMBER
    Since 2014 (International)
  • ENGINEERS AUSTRALIA (EA), PROFESSIONAL ENGINEER
    Since 2014 (International)
  • CHARTERED PROFESSIONAL ENGINEER [CPENG NER(AUSTRALIA)] 2023-24, PROFESSIONAL ENGINEER
    Since 2014 (International)
  • INSTITUTION OF ENGINEERS, MALAYSIA (IEM), FELLOW
    Since 2012 (National)
  • EMF, INTERNATIONAL PROFESSIONAL ENGINEER (INTPE), PROFESSIONAL ENGINEER
    Since 2012 (International)
  • ASIA-PACIFIC ECONOMIC COOPERATION (APEC), PROFESSIONAL ENGINEER
    Since 2012 (International)
  • AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR CONDITIONING ENGINEERS, INC, MEMBER
    Since 2006 (International)
  • BOARD OF ENGINEERS, MALAYSIA (BEM), PROFESSIONAL ENGINEER
    Since 1998 (National)
  • BOARD OF ENGINEERS MALAYSIA (BEM), PROFESSIONAL ENGINEER
    Since 1998 (National)
  • GOLDEN KEY NATIONAL HONOR SOCIETY, USA, LIFE MEMBER
    Since 1994 (International)
  • TAU BETA PI NATIONAL ENGINEERING HONOR SOCIETY, USA, LIFE MEMBER
    Since 1994 (International)

AWARD AND STEWARDSHIP


  • TOP 2% SCIENTISTS (CAREER LONG) IN THE WORLD IN THEIR RESPECTIVE FIELDS 2024
    Stanford University through Elsevier Data Repository, 2024 (International)
  • TOP 2% SCIENTISTS IN THE WORLD IN THEIR RESPECTIVE FIELDS 2023
    Stanford University through Elsevier Data Repository, 2023 (International)
  • WORLD?S TOP 2% SCIENTISTS 2022
    Stanford University, 2022 (International)
  • Certificate of Appreciation for being an invited speaker and panel member at the Webinar on Ventilation and COVID-19 with a focus on Hospitals
    Department of Social and Preventive Medicine Faculty of Medicine, University of Malaya 50603 Kuala Lumpur, MALAYSIA, 2020 (University)
  • Certificate of Reviewing
    International Journal of Heat and Mass Transfer , 2020 (International)
  • Top 2% Scientists By Stanford University for the year 2019
    Stanford University, 2020 (International)
  • World's Top 2% Scientists Career-Long Citation Impact by Stanford University
    Stanford University, 2020 (International)
  • IIRG Grant Award
    University of Malaya, 2019 (University)
  • Certificate of Reviewing
    The Editors of ENERGY & BUILDINGS, Elsevier, Amsterdam, The Netherlands, 2018 (International)
  • Certificate of Reviewing
    The Editors of ENERGY CONVERSION AND MANAGEMENT, Elsevier, Amsterdam, The Netherlands., 2018 (International)
  • Certificate of Outstanding Contribution in Reviewing
    The Editors of APPLIED THERMAL ENGINEERING Elsevier, Amsterdam, The Netherlands, 2018 (International)
  • Certificate of Outstanding Contribution in Reviewing
    The Editors of ENERGY Elsevier, Amsterdam, The Netherlands, 2017 (International)
  • Certificate of Reviewing
    The Editors of APPLIED ENERGY Elsevier, Amsterdam, The Netherlands, 2017 (International)
  • Certificate of Outstanding Contribution in Reviewing
    The Editors of APPLIED ENERGY Elsevier, Amsterdam, The Netherlands, 2017 (International)
  • BEYOND ENGINEERING INNOVATION (BEGIN) CHALLENGE 2017 - Certificate of Appreciation
    BEYOND ENGINEERING INNOVATION (BEGIN), 2017 (National)
  • KHIDMAT SETIA 20 AWARD
    University of Malaya, 2017 (University)
  • Certificate of Reviewing
    The Editors of International Journal of Thermal Sciences, Amsterdam, The Netherlands, 2016 (International)
  • Certificate of Reviewing
    The Editors of Energy, Elsevier, Amsterdam, The Netherlands, 2016 (International)
  • Certificate of Outstanding Contribution in Reviewing
    The Editors of Energy & Buildings, Elsevier, Amsterdam, The Netherlands, 2016 (International)
  • Certificate of Reviewing
    The Editors of Energy & Buildings, Elsevier, Amsterdam, The Netherlands, 2016 (International)
  • Certificate of Appreciation
    Faculty of Engineering, 2016 (University)
  • 10 Years Long Membership Award
    American Society of Heating, Refrigerating and Air-Conditioning Engineers, 2016 (International)
  • Certificate of Reviewing
    Building and Environment, 2015 (International)
  • Certificate of Appreciatition
    Institutition of Engineers, Malaysia (IEM), 2015 (National)
  • The Carter Bronze Medal
    Chartered Institution of Building Services Engineers I 222 Balham High Road I London I SW12 9BS, 2015 (International)
  • Certificate of Appreciatition
    Institutition of Engineers, Malaysia (IEM), 2014 (National)
  • The Carter Bronze Medal
    Chartered Institution of Building Services Engineers I 222 Balham High Road I London I SW12 9BS, 2013 (International)
  • The Best Paper Award in the United Kingdom-Malaysia-Ireland Engineering Science Conference, Kuala Lumpur, 12-14 July 2011
    UMIES 2011, 2011 (International)
  • CERTIFICATE OF EXCELLENT SERVICE
    University of Malaya, 2010 (University)
  • CERTIFICATE OF EXCELLENT SERVICE ? 2009
    University of Malaya, 2009 (University)
  • CERTIFICATE OF EXCELLENT SERVICE
    University of Malaya, 2009 (University)
  • Pingat Gangsa - UM Research, Invention & Innovation, 2009
    UM, 2009 (National)
  • The British Prime Minister's Initiative for International Education (PMI-2) Connect Award
    British Council (UK), 2009 (International)
  • CERTIFICATE OF EXCELLENT SERVICE
    University of Malaya, 2008 (University)
  • CERTIFICATE OF EXCELLENT SERVICE
    University of Malaya, 2007 (University)
  • EXCELLENCE SERVICE AWARD
    University of Malaya, 2006 (University)
  • CERTIFICATE OF EXCELLENT SERVICE
    University of Malaya, 2005 (University)
  • Study Leave Award (HLCB)
    University of Malaya, 2001 (University)
  • MFAT-NZAID Award
    New Zealand Government, 2001 (International)

PUBLICATIONS


Article in Journal
WoS
  1. Liu, Yiqiao; Chong, Wen Tong; Yau, Yat Huang; Wu, Jinshun; Chang, Yufan; Cui, Tong; Chang, Li; Pan, Song (2024). A hybrid learning approach to model the diversity of window-opening behavior, BUILDING AND ENVIRONMENT. 257. doi:10.1016/j.buildenv.2024.111525
  2. Qin, Mingyuan; Chew, Bee Teng; Yau, Yat Huang; Li, Chao; Liu, Yiqiao; Han, Xiaofei; Chao, Ong Zhi; Pan, Song (2024). Thermal comfort characteristics of a catalytic combustion heater under wind-chilled exposure, JOURNAL OF CLEANER PRODUCTION. 436. doi:10.1016/j.jclepro.2024.140701
  3. Yau, Yat Huang; Rajput, Umair Ahmed (2024). A comprehensive numerical study of the effects of the air distribution terminals on the performance of a novel VRF-SV hybrid system, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE. 238(16), 8464-8482. doi:10.1177/09544062241237415
  4. Yau, Yat Huang; Rajput, Umair Ahmed; Badarudin, Ahmad (2024). A comprehensive review of variable refrigerant flow (VRF) and ventilation designs for thermal comfort in commercial buildings, JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY. . doi:10.1007/s10973-023-12837-3
  5. Yau, Yat Huang; Rodzi, Mohd Azhari Mohd; Ghazali, Nik Nazri Nik (2024). Numerical simulation on supply air of high sidewall grille with retrofitted energy recovery ventilator system for thermal comfort in the tropics, JOURNAL OF BUILDING ENGINEERING. 89. doi:10.1016/j.jobe.2024.109281
  6. Chang, L.; Chong, W. T.; Yau, Y. H.; Cui, T.; Wang, X. R.; Pei, F.; Liu, Y. Q.; Pan, S. (2023). An investigation of the PM2.5 concentrations and cumulative inhaled dose during subway commutes in Changchun, China, INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY. . doi:10.1007/s13762-023-04994-7
  7. Goo, W. H.; Ganesan, P. B.; Yong, K. W.; Ahmad, M. Y.; Yau, Y. H.; Hamad, F. (2023). Air Bubble Size and Its Transition in a Horizontal Tube Produced by Venturi-Nozzle Bubble Generator, JOURNAL OF APPLIED FLUID MECHANICS. 16(11), 2082-2100. doi:10.47176/jafm.16.11.1845
  8. Qin, Mingyuan; Chew, Bee Teng; Yau, Yat Huang; Wang, Xinru; Wang, Chunqing; Luo, Xueqing; Li, Lei; Pan, Song (2023). Emergency heater based on gas-fired catalytic combustion infrared technology: Structure, evaluation and thermal response, ENERGY. 274. doi:10.1016/j.energy.2023.127426
  9. Qin, Mingyuan; Chew, Bee Teng; Yau, Yat Huang; Yang, Zhen; Han, Xiaofei; Chang, Li; Liu, Yiqiao; Pan, Song (2023). Characteristic analysis and improvement methods of the indoor thermal environment in post-disaster temporary residential buildings: A systematic review, BUILDING AND ENVIRONMENT. 235. doi:10.1016/j.buildenv.2023.110198
  10. Yau, Y. H.; Chuah, Y. K.; Chuah, K. H.; Rajput, U. A.; Liew, H. J. (2023). The preliminary evaluation of design guidelines of stratum ventilation in a large tropical lecture hall, INTERNATIONAL JOURNAL OF VENTILATION. . doi:10.1080/14733315.2022.2161142
  11. Yau, Yat Huang; Rajput, Umair Ahmed (2023). Performance evaluation of an architecturally-designed vertical high capacity linear slot diffuser in a tropical atrium, ARCHITECTURAL SCIENCE REVIEW. 66(1), 53-69. doi:10.1080/00038628.2022.2140988
  12. Yit, Jing Ee; Chew, Bee Teng; Yau, Yat Huang (2023). The study of pleat geometry on the air filtration performance, INDOOR AND BUILT ENVIRONMENT. . doi:10.1177/1420326X221145413
  13. Liu, Yiqiao; Chong, Wen Tong; Yau, Yat Huang; Chang, Li; Cui, Tong; Yu, Haowei; Cui, Ying; Pan, Song (2022). Rethinking the limitations of research on occupants? window-opening behavior: A review, ENERGY AND BUILDINGS. 277. doi:10.1016/j.enbuild.2022.112552
  14. Tan, Huiyi; Wong, Keng Yinn; Lee, Chew Tin; Wong, Syie Luing; Nyakuma, Bemgba Bevan; Wahab, Roswanira Abdul; Lee, Kee Quen; Chiong, Meng Choung; Ho, Wai Shin; Othman, Mohd Hafiz Dzarfan; Yau, Yat Huang; Kek, Hong Yee; Kamar, Haslinda Mohamed (2022). Numerical assessment of ceiling-mounted air curtain on the particle distribution in surgical zone, JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY. . doi:10.1007/s10973-022-11466-6
  15. Wong, C. M.; Yau, Y. H.; Ong, H. C.; Chin, W. M. (2022). Study of climate change impacts on the lifespan of a bin weather data set in Senai, Malaysia, URBAN CLIMATE. 44. doi:10.1016/j.uclim.2022.101219
  16. Yau, Y. H.; Poh, H. H. (2022). Novel Numerical Modeling of Concentric and Lateral Capillary Tube Suction Line Heat Exchangers, IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF MECHANICAL ENGINEERING. . doi:10.1007/s40997-022-00495-z
  17. Yau, Yat Huang; Phuah, Kok Sun (2022). Indoor air quality study in four Malaysian hospitals for centralized and non-centralized ACMV systems, AIR QUALITY ATMOSPHERE AND HEALTH. . doi:10.1007/s11869-022-01280-2
  18. Yau, Yat Huang; Poh, Kai Sin; Badarudin, Ahmad (2022). A techno-economical study of a solar-assisted under-floor air distribution system for buildings in the tropics, SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS. 51. doi:10.1016/j.seta.2021.101915
  19. Yau, Yat Huang; Rajput, Umair Ahmed (2022). Numerical simulation of a novel VRF-SV hybrid system performance in a large retail facility in the tropics, JOURNAL OF BUILDING PERFORMANCE SIMULATION. 15(3), 323-344. doi:10.1080/19401493.2022.2047225
  20. Yau, Yat Huang; Rajput, Umair Ahmed (2022). Thermal Comfort Assessment and Design Guidelines of a VRF-Integrated Stratum Ventilation System for a Large Tropical Building, ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING. . doi:10.1007/s13369-022-06823-4
  21. Yau, Yat Huang; Rajput, Umair Ahmed; Rajpar, Altaf Hussain; Lastovets, Natalia (2022). Effects of Air Supply Terminal Devices on the Performance of Variable Refrigerant Flow Integrated Stratum Ventilation System: An Experimental Study, ENERGIES. 15(4). doi:10.3390/en15041265
  22. Yau, Yat Huang; Toh, Hui Sin; Chew, Bee Teng; Ghazali, Nik Nazri Nik (2022). A review of human thermal comfort model in predicting human-environment interaction in non-uniform environmental conditions, JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY. . doi:10.1007/s10973-022-11585-0
  23. Yit, Jing Ee; Yau, Yat Huang; Chew, Bee Teng (2022). The influence of filtration velocity on the full-sized fibrous filter performance, INDOOR AND BUILT ENVIRONMENT. . doi:10.1177/1420326X221113446
  24. Kwan, Z., Najhan, N. N. K., Yau, Y. H., Luximon, Y., & Nor, F. M. (2020). Anticipating local flapsclosed-formsolution on3Dface models using finite element method. International Journal for Numerical Methods in Biomedical Engineering, 36(11), 16. doi: 10.1002/cnm.3390
  25. Yau, Y. H., Amir, M. (2020). Energy use analysis of the variable refrigerant flow (VRF) system versus the multi-split unit using TRNSYS. Heat and Mass Transfer, 56(2), 671-690. doi: 10.1007/s00231-019-02726-7
  26. Yau, Y. H., Chuah, K. H., Siew, M. T. (2020). The Study on Thermal Environment and Airflow Pattern in an UFAD System Under a Cooling Mode. Arabian Journal for Science and Engineering, 45(2), 891-908. doi: 10.1007/s13369-019-04184-z
  27. Yau, Y. H., Wong, C. M., Ong, H. C., & Chin, W. M. (2020). Application of the bin weather data for building energy analysis in the tropics. Energy Efficiency, 13(5), 935-953. doi: 10.1007/s12053-020-09862-8
  28. Yau, Y. H.; Amir, M. (2020). Energy use analysis of the variable refrigerant flow (VRF) system versus the multi-split unit using TRNSYS, HEAT AND MASS TRANSFER. 56(2), 671-690. doi:10.1007/s00231-019-02726-7
  29. Yau, Y. H.; Chuah, K. H.; Siew, M. T. (2020). The Study on Thermal Environment and Airflow Pattern in an UFAD System Under a Cooling Mode, ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING. 45(2), 891-908. doi:10.1007/s13369-019-04184-z
  30. Yit, J. E., Chew, B. T., & Yau, Y. H. (2020). A review of air filter test standards for particulate matter of general ventilation. Building Services Engineering Research & Technology, 41(6), 758-771. doi: 10.1177/0143624420915626
  31. Yau, Y., Poh, H. (2019). Study on Flow Behavior and Heat Exchange Characteristics of a Capillary Tube-Suction Line Heat Exchanger. Heat Transfer Engineering, 40(7), 574-587. doi:10.1080/01457632.2018.1436420
  32. Yau, Yat; Poh, Hong (2019). Study on Flow Behavior and Heat Exchange Characteristics of a Capillary Tube-Suction Line Heat Exchanger, HEAT TRANSFER ENGINEERING. 40(7), 574-587. doi:10.1080/01457632.2018.1436420
  33. Yau, Y. H.; Chang, C. P. (2018). Performance analysis on an air-conditioning system installed with and without a fuzzy logic thermostat in an office building, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY. 232(8), 1079-1092. doi:10.1177/0957650918762022
  34. Yau, Y. H.; Poh, K. S.; Badarudin, A. (2018). A numerical airflow pattern study of a floor swirl diffuser for UFAD system, ENERGY AND BUILDINGS. 158, 525-535. doi:10.1016/j.enbuild.2017.10.037
  35. Yau, Yat Huang; Hua, Shijie Norman; Kok, Chee Kuang (2018). Structural failure analysis of polycarbonate enclosures of electronic devices subjected to multiple ball impacts, POLYMER TESTING. 65, 374-386. doi:10.1016/j.polymertesting.2017.12.013
  36. Yau, Yat Huang; Poh, Kai Sin; Badarudin, Ahmad (2018). An investigation of thermal environment of an existing UFAD system in a high-rise office building in the tropics, JOURNAL OF ENVIRONMENTAL HEALTH SCIENCE AND ENGINEERING. 16(2), 313-322. doi:10.1007/s40201-018-0319-1
  37. Oshkour, A. A., Talebi, H., Shirazi, S. F. S., Bayat, M., Yau, Y. H., Tarlochan, F., Abu Osman, N. A. (2014). Comparison of Various Functionally Graded Femoral Prostheses by Finite Element Analysis, Scientific World Journal. (17), Article
  38. Yau, Y. H., Ahmadzadehtalatapeh, M. (2014). Performance Analysis of a Heat Pipe Heat Exchanger Under Different Fluid Charges, Heat Transfer Engineering. 35(18), 1539-15480145-7632.
  39. Yau, Y. H., Chew, B. T. (2014). A review on predicted mean vote and adaptive thermal comfort models, Building Services Engineering Research Technology. 35(1), 23-35
  40. Yau, Y. H., Chew, B. T. (2014). Adaptive thermal comfort model for air-conditioned hospitals in Malaysia, Building Services Engineering Research Technology. 35(2), 117-138
  41. Yau, Y. H., Ding, L. C. (2014). A case study on the air distribution in an operating room at Sarawak General Hospital Heart Centre (SGHHC) in Malaysia, Indoor and Built Environment. 23(8), 1129-1141
  42. Yau, Y. H., Pean, H. L. (2014). The performance study of a split type air conditioning system in the tropics, as affected by weather, Energy and Buildings. 72, 1-7
  43. Oshkour, A. A., Abu Osman, N. A., Davoodi, M. M., Yau, Y. H., Tarlochan, F., Abas, W., Bayat, M. (2013). Finite element analysis on longitudinal and radial functionally graded femoral prosthesis, International Journal for Numerical Methods in Biomedical Engineering. 29(12), 1412-1427
  44. Oshkour, A. A., Abu Osman, N. A., Yau, Y. H., Tarlochan, F., Abas, W. (2013). Design of new generation femoral prostheses using functionally graded materials: A finite element analysis, Proceedings of the Institution of Mechanical Engineers Part H-Journal of Engineering in Medicine. 227(H1), 3-17
  45. Oshkour, A. A., Abu Osman, N. A., Yau, Y. H., Tarlochan, F., Pramanik, S., Abas, W. (2013). Internal-external circumferential crack behaviour in the cement layer of total hip replacement, Fatigue Fracture of Engineering Materials Structures. 36(7), 586-601
  46. Oshkour, A. A., Davoodi, M. M., Abu Osman, N. A., Yau, Y. H., Tarlochan, F., Abas, W. (2013). Finite element analysis of circumferential crack behavior in cement-femoral prosthesis interface, Materials Design. 49, 96-102
  47. Yau, Y. H., Hasbi, S. (2013). A review of climate change impacts on commercial buildings and their technical services in the tropics, Renewable Sustainable Energy Reviews. 18, 430-441
  48. Yau, Y. H., Hussain, A., Lalwani, R. K., Chan, H. K., Hakimi, N. (2013). Temperature distribution study during the friction stir welding process of Al2024-T3 aluminum alloy, International Journal of Minerals Metallurgy and Materials. 20(8), 779-787
  49. Yau, Y. H., Phuah, K. S., Ding, L. C., Lian, Y. C., Chang, C. P. (2013). Potential of vapour decontamination for improving IAQ - Making use of tea tree oil: The case of a healthcare facility, Building and Environment. 60, 280-290
  50. Leong, K. Y., Saidur, R., Mahlia, T. M. I., Yau, Y. H. (2012). Entropy generation analysis of nanofluid flow in a circular tube subjected to constant wall temperature, International Communications in Heat and Mass Transfer. 39(8), 1169-1175
  51. Leong, K. Y., Saidur, R., Mahlia, T. M. I., Yau, Y. H. (2012). Modeling of shell and tube heat recovery exchanger operated with nanofluid based coolants, International Journal of Heat and Mass Transfer. 55(4), 808-816
  52. Leong, K. Y., Saidur, R., Mahlia, T. M. I., Yau, Y. H. (2012). Performance investigation of nanofluids as working fluid in a thermosyphon air preheater, International Communications in Heat and Mass Transfer. 39(4), 523-529
  53. Yau, Y. H. (2012). Climate change implications for HVACR systems for a large library building in Malaysia, Building Services Engineering Research Technology. 33(2), 123-139
  54. Yau, Y. H., Ding, L. C. (2012). Empirical study of horizontal two-row heat pipe heat exchanger in tropical climates, Journal of the Energy Institute. 85(1), 50-56
  55. Yau, Y. H., Rismanchi, B. (2012). A review on cool thermal storage technologies and operating strategies, Renewable Sustainable Energy Reviews. 16(1), 787-797
  56. Yau, Y. H., Badarudin, A., Rubini, P. A. (2012). A numerical study of secondary flow and large eddies in a driven cavity, Journal of Mechanical Science and Technology. 26(1), 93-102
  57. Yau, Y. H., Wong, H. F., Ahmad, N. (2012). Numerical heat transfer study for a large rubber product, International Journal of Heat and Mass Transfer. 55(11-12), 2879-2888
  58. Afshar, R., Bayat, M., Lalwani, R. K., Yau, Y. H. (2011). Elastic behavior of glass-like functionally graded infinite hollow cylinder under hydrostatic loads using finite element method, Materials Design. 322(781-787), Article
  59. Ahmadzadehtalatapeh, M., Yau, Y. H. (2011). The application of heat pipe heat exchangers to improve the air quality and reduce the energy consumption of the air conditioning system in a hospital ward-A full year model simulation, Energy and Buildings. 439(2344-2355), Article
  60. Yau, Y. H., Ahmadzadehtalatapeh, M. (2011). EMPIRICAL STUDY OF AN AIR-TO-AIR HEAT PIPE HEAT EXCHANGER IN TROPICAL CLIMATES, Experimental Heat Transfer. 244(313-334), Article
  61. Yau, Y. H., Ahmadzadehtalatapeh, M. (2011). Predicting yearly energy recovery and dehumidification enhancement with a heat pipe heat exchanger using typical meteorological year data in the tropics, Journal of Mechanical Science and Technology. 254(847-853), Article
  62. Yau, Y. H., Ahmadzadehtalatapeh, M. (2011). The empirical study of a four-row heat pipe heat exchanger to predict the year-round energy recovery in the tropics, Building Services Engineering Research Technology. 324(307-327), Article
  63. Yau, Y. H., Foo, Y. C. (2011). Comparative study on evaporator heat transfer characteristics of revolving heat pipes filled with R134a, R22 and R410A, International Communications in Heat and Mass Transfer. 382(202-211), Article
  64. Yau, Y. H., Hua, S. N. (2011). A Comprehensive Review of Drop Impact Modeling on Portable Electronic Devices, Applied Mechanics Reviews. 64(2), Review
  65. Yau, Y. H., Ng, W. K. (2011). A comparison study on energy savings and fungus growth control using heat recovery devices in a modern tropical operating theatre, Energy Conversion and Management. 524(1850-1860), Article
  66. Yau, Y. H., Pean, H. L. (2011). The climate change impact on air conditioner system and reliability in Malaysia-A review, Renewable Sustainable Energy Reviews. 159(4939-4949), Review
  67. Yau, Y. H., Badarudin, A., Rubini, P. A. (2011). Numerical and scalability analysis of an unstructured Cartesian flow solver, Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science. 225C9(2138-2148), Article
  68. Yau, Y. H., Chandrasegaran, D., Badarudin, A. (2011). The ventilation of multiple-bed hospital wards in the tropics: A review, Building and Environment. 465(1125-1132), Review
  69. Yau, Y. H. (2010). Analyses of heat recovery devices in the HVAC system in an operating theatre in the tropics, Building Services Engineering Research Technology. 31(4), 341-355
  70. Yau, Y. H., Ahmadzadehtalatapeh, M. (2010). A review on the application of horizontal heat pipe heat exchangers in air conditioning systems in the tropics, Applied Thermal Engineering. 30(2-3), 77-84
  71. Yau, Y. H., Lee, S. K. (2010). Feasibility study of an ice slurry-cooling coil for HVAC and R systems in a tropical building, Applied Energy. 87(8), 2699-2711
  72. Yau, Y. H., Chew, B. T. (2009). Thermal comfort study of hospital workers in Malaysia, Indoor Air. 19(6), 500-510
  73. Yau, Y. H. (2008). The heat pipe heat exchanger: a review of its status and its potential for coolness recovery in tropical buildings, Building Services Engineering Research Technology. 29(0143-6244 ), 4
  74. Yau, Y. H. (2008). The use of a double heat pipe heat exchanger system for reducing energy consumption of treating ventilation air in an operating theatre- A full year energy consumption model simulation, Energy and Buildings. 40(0378-7788 ), 5
  75. Yau, Y. H. (2007). Application of a heat pipe heat exchanger to dehumidification enhancement in a HVAC system for tropical climates - a baseline performance characteristics study, International Journal of Thermal Sciences. 46(2), 164-171
  76. Yau, Y. H. (2007). Experimental thermal performance study of an inclined heat pipe heat exchanger operating in high humid tropical HVAC systems, International Journal of Refrigeration-Revue Internationale Du Froid. 30(7), 1143-1152
  77. Yau, Y. H. (2006). Analysis of enthalpy change with/without a heat pipe heat exchanger in a tropical air conditioning system, International Journal of Energy Research. 30(15), 1251-1263
  78. Yau, Y. H. (2001). Theoretical determination of effectiveness for heat pipe heat exchangers operating in naturally ventilated tropical buildings, Proceedings of the Institution of Mechanical Engineers Part a-Journal of Power and Energy. 215(A3), 389-397
ESCI
  1. Yit, Jing Ee; Yau, Yat Huang; Chew, Bee Teng (2022). Empirical modelling of filtration performance for the fibrous air filters with final resistance recommendation, RESULTS IN ENGINEERING. 16. doi:10.1016/j.rineng.2022.100732
  2. Ahmadzadehtalatapeh, M.; Yau, Y. H. (2017). ASSESSMENT OF CLIMATE CHANGE IMPACT ON THE REQUIRED COOLING LOAD OF THE HOSPITAL BUILDINGS, JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY. 12(8), 2091-2105
Others
  1. Kwan, Z., Najhan, N.N.K., Yau, Y.H., Luximon, Y., and Nor, F. M. (2020). Anticipating Local Flaps Closed Form Solution on 3D Face Models Using Finite Element Method. International Journal for Numerical Methods in Biomedical Engineering (2020), Vol. 36 (11). https://doi.org/10.1002/cnm.3390. [Impact Factor: Q2-2.097].
  2. Y.H. YAU, K.H. CHUAH & M.T. SIEW. THE STUDY ON THERMAL ENVIRONMENT AND AIR FLOW PATTERN IN AN UFAD SYSTEM UNDER A COOLING MODE. Arabian Journal for Science and Engineering (2019). https://doi: 10.1007/s13369-019-04184-z. [Impact Factor: Q3-1.518].
  3. Yau, Y.H. & Amir, M. Energy use analysis of the variable refrigerant flow (VRF) system versus the multi - split unit using TRNSYS. Heat Mass Transfer (2019). https://doi.org/10.1007/s00231-019-02726-7. [Impact Factor: Q3-1.551].
  4. Y.H. YAU, C.P. CHANG. (2018). Performance Analysis on an Air Conditioning System Installed with and without a Fuzzy Logic Thermostat in an Office Building, Part A: Journal of Power and Energy.
  5. Yau Y.H., Tam J.H. (2018). A COMPARISON STUDY FOR ACTIVE CHILLED BEAM AND VARIABLE AIR VOLUME SYSTEMS FOR AN OFFICE BUILDING. Energy Procedia 152 (2018) 378 383.
  6. Y.H. Yau, S. Hasbi. A Comprehensive Case Study of Climate Change Impacts on the Cooling Load in an Air-Conditioned Office Building in Malaysia, Energy Procedia 2017, Accepted manuscript for publication.
  7. Y.H. Yau, S.N. Hua, C.K. Kok, Structural failure analysis of polycarbonate enclosures of electronic devices subjected to multiple ball impacts, Polymer Testing (2018), doi:10.1016/j.polymertesting.2017.12.013.
  8. Yau Y.H., Poh H.H. Study on Flow Behavior and Heat Exchange Characteristics of a Capillary Tube-Suction Line Heat Exchanger. Heat Transfer Engineering 2019. Vol. 40 (7), 574-587. [Impact Factor: Q2-1.235].
  9. Y.H. YAU and C.P. CHANG, The Fieldwork and Control Engineering Studies on Thermal Comfort of Occupants in a Conventional Office Building in the Tropics, Building Services Engineering Research & Technology (2016), Vol. 37(3) 355 373 [Impact Factor:Q3-0.820].
  10. Y.H. YAU and Y.C. LIAN, A CFD Study of the Effects of Buoyancy on Air Flow Surrounding a Building, Building Services Engineering Research & Technology (2016), Vol. 37(3) 257 271 [Impact Factor:Q3-0.820].
  11. Yau Y.H., Lim K.S. Energy Analysis of Green Office Buildings in the Tropics - Photovoltaic System. Energy and Buildings 126 (2016) pp. 177-193
  12. A.A. Oshkour, H. Talebi, S.F.S. Shirazi, Y.H. Yau, S. Pramanik, F. Tarlochan, Parametric study of radial functionally graded femoral prostheses with different geometries, Meccanica. Vol. 50, Issue 7, 2015, 1657- 1678 [Impact Factor:Q1-1.815]
  13. Azim Ataollahi Oshkour, Hossein Talebi, Seyed Farid Seyed Shirazi, Y. H. Yau, Faris Tarlochan, and N. A. Abu Osman, Effect of Geometrical Parameters on the Performance of Longitudinal Functionally Graded Femoral Prostheses, Artificial Organs, Vol. 39(2), 2015, 156-164 [Impact Factor:Q2-2.05]
  14. Azim Ataollahi Oshkour, Sumit Pramanik, Mehdi Mehrali, Yat Huang Yau, Faris Tarlochan, Noor Azuan Abu Osman, Mechanical and physical behaviour of newly developed functionally graded materials and composites of stainless steel 316L with calcium silicate and hydroxyapatite, Journal of the Mechanical Behavior of Biomedical Materials. Vol. 49, September 2015, Pages 321-331 [Impact Factor:Q1- 3.048]
  15. L.C. DING and Y.H. YAU.(2015). A Study on the Arrangement of Air Inlets in a Class 7 Clean Room, Building Services Engineering Research & Technology, 36 (3), 357-367.
  16. Y.H. YAU and L.C. DING, 2015, A Comprehensive CFD Simulation on the Air Distribution in an Operating Room at University of Malaya Medical Centre Malaysia, Indoor and Built Environment. Vol. 24 (3) 355-369 [Impact Factor: Q2-1.225]
  17. Yat H. YAU and M Ahmadzadehtalatapeh, HEAT PIPE HEAT EXCHANGER AND ITS POTENTIAL TO ENERGY RECOVERY IN THE TROPICS. THERMAL SCIENCE, Year 2015, Vol. 19, No. 6, pp. 1-13 [Impact Factor:Q2-0.962]
  18. Yau Y.H., Hasbi S. 2015. Field analysis of indoor air quality in high rise and low rise green offices with radiant slab cooling systems in Malaysia. Indoor and Built Environment. Vol. 24(2) 174-184 [Impact Factor: Q2-1.225]
  19. Y.H. YAU, B.T. CHEW. (2014). A REVIEW ON PMV AND ADAPTIVE THERMAL COMFORT MODELS. Building Services Engineering Research & Technology, 35(1), 23 35.
  20. Y.H. Yau, W.C. Chan and C.W.F. Yu, Solar thermal systems for large high rise buildings in Malaysia. Indoor and Built Environment 2014, Vol. 23(7) 917-919.
  21. A.A. Oshkour, N.A. Abu Osman, Y.H. Yau, F. Tarlochan, S. Pramanik and W.A.B Wan Abas, Internal-external circumferential crack behavior in the cement layer of total hip replacement. Fatigue and Fracture of Engineering Materials and Structures Vol. 36, Issue 7, 2013, 586-601 [Impact Factor: Q2-0.861].
  22. M. Ahmadzadehtalatapeh, Y. H. Yau, Fully Fresh Air Air- conditioning System Equipped with Double Heat Pipe Based Heat Recovery Technology, International Journal of Engineering TRANSACTIONS A: Basics Vol. 26, No. 1, (January 2013) 461-467.
  23. Y.H. YAU, B.T. CHEW and A.Z.A. SAIFULLAH. A field study on thermal comfort of occupants and acceptable neutral temperature at the National Museum in Malaysia. Indoor and Built Environment. Vol. 22, Issue 2, 2013, Pages 433- 444 [Impact Factor: Q1-2.0]
  24. Y.H. YAU, B.T. CHEW, A.Z.A. SAIFULLAH. (2013). A Field Study on Thermal Comfort of Occupants and Acceptable Neutral Temperature at the National Museum in Malaysia. Indoor and Built Environment. 22 (2), 433-444.
  25. Y.H. Yau, A. Hussain, R.K. Lalwani, H.K. Chan, N. Hakimi, Temperature Distribution Study During the FSW Process of Aluminum Alloy Al2024-T3, International Journal of Minerals, Metallurgy and Materials, Vol. 20, Issue 8, 2013, 779-787 [Impact Factor:Q3-0.483]
  26. A.A. Oshkour, N.A. Abu Osman, Y.H. Yau, F. Tarlochan, S. Pramanik and W.A.B Wan Abas (2013), Internal-external circumferential crack behavior in the cement layer of total hip replacement. Fatigue and Fracture of Engineering Materials and Structures, 36 (7), 586-601. [Impact Factor: 0.847].
  27. AA Oshkour, NA Abu Osman, YH Yau, F Tarlochan and WAB Wan Abas, (2012). Design of new generation femoral prostheses using functionally graded materials: A finite element element, Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 227(1) 3 17 [Impact Factor: Q3-1.208].
  28. K.Y. Leong, R. Saidur, T.M.I. Mahlia, Y.H. Yau. (2012). Modeling of shell and tube heat recovery exchanger operated with nano-fluid based coolants. International Journal of Heat and Mass Transfer, 55 (4), 808-816.
  29. Y.H. YAU, B.T. CHEW and A.Z.A. SAIFULLAH. (2012). Studies on the Indoor Air Quality of Pharmaceutical Laboratories in Malaysia. International Journal of Sustainable Built Environment, 1, 110 124.
  30. Y.H. Yau. 2012. Climate change implications for HVAC&R systems for a large library building in malaysia. Building Serv. Eng. Res. Technol. 33(2), pp. 123 139.
  31. Fu Jen Wang, Yat Huang Yau, Wen Bin Ng, Chi Ming Lai, Improvement of the Indoor Environment and Airborne Contamination Control in an Operating Room, Advanced Materials Research Vols. 255-260 (2011) pp 1532-1536.
  32. M. Ahmadzadehtalatapeh, Y.H. Yau, The application of heat pipe heat exchangers to improve the air quality and reduce the energy consumption of the air conditioning system in a hospital ward A full year model simulation, Energy and Buildings 43 (2011) 2344-2355
  33. Wang, F.J., Chang, J.C., Lin, K.C., Yau, Y.H. Performance testing of a thermoelectric cooler for medical application. Advanced Materials Research. Volume 255-260, 2011, Pages 1537-1540.
  34. Y. H. Yau and C. K. Chang, VIABILITY STUDIES ON HVAC SYSTEMS IN A FUTURE LIBRARY LOCATED IN THE TROPICS. Engineering e-Transaction (ISSN 1823-63790), Vol. 5, No. 2, December 2010, pp 80-89.
  35. Yau, Y.H., Ahmadzadehtalatapeh, M. 2010. Experimental investigation of the thermal performance of an air-to- air horizontal heat pipe heat exchanger. International Journal of Mechanical and Materials Engineering Volume 5, Issue 1,Pages 29-35.
  36. Wang F.J., Yau, Y.H., Liu Z.R. and Zheng Y.R. 2009. Performance Evaluation Through CFD Simulation and Field Measurement on a Bio-Cleanroom for Vaccine Storage. Journal of Applied Sciences 9 (24): 4232- 4239.
  37. Y.H.Yau, N.N.N. Ghazali, W.T. Chong and A. Badarudin Final Report on Boiler Optimization with CFD-Flue Gas Trace Simulation. Department of Mechanical Engineering, University of Malaya, February 2009.
  38. Y.H.Yau, N.N.N. Ghazali, W.T. Chong and A. Badarudin Preliminary Report on Boiler Optimization with CFD- Flue Gas Trace Simulation. Department of Mechanical Engineering, University of Malaya, November 2008.
  39. Yau Y.H. Preliminary HVAC Systems and Indoor Environmental Quality Assessment Report for Examination Building, University of Malaya Department of Mechanical Engineering, University of Malaya, April 2008.
  40. Yau Y.H. (2008). The use of a double heat pipe heat exchanger system for reducing energy consumption of treating ventilation air in an operating theatre - A full year energy consumption model simulation. Energy and Buildings, 40 (5), 917-925.
  41. Yau, Y.H. (2008). The heat pipe heat exchanger: The heat pipe heat exchanger: a review of its status and its potential for coolness recovery in tropical buildings. Building Services Engineering Research and Technology, 29 (4), 291-310.
  42. Yau, Y.H., 2008. A Preliminary Thermal Comfort Study in Tropical Buildings Located in Malaysia. International Journal of Mechanical and Materials Engineering, 3 (2), 119-126.
  43. Yau, Y.H., Foo Y. and M.H.H. MOHYI, (2008). A PRELIMINARY STUDY ON HVAC SYSTEMS AND THERMAL COMFORT IN A TROPICAL UNIVERSITY BUILDING IN MALAYSIA. International Journal of Mechanical and Materials Engineering, 3 (2), 1160-175.
  44. Yau Y.H. Final Indoor Air Quality Assessment Report , pp1-114, Department of Mechanical Engineering, University of Malaya, November 2007.
  45. Yau Y.H. Indoor Air Quality Assessment Report , pp1- 56, Department of Mechanical Engineering, University of Malaya, October 2007.
  46. Yau Y.H. (2006). The Analysis of Enthalpy Change with and without a Heat Pipe Heat Exchanger in a Tropical Air Conditioning System. International Journal of Energy Research, 30 (15), 1251-1263.
  47. Yau Y.H.(2006). Using heat pipe heat exchangers for reducing energy consumption of treating ventilation air in an operating theatre in a tropical climate: a simplified model. BUILDING SERVICES ENGINEERING RESEARCH & TECHNOLOGY, 27 (4), 297-310.
  48. Yau Y.H. and Tucker A.S. (2003). The performance study of a wet six-row heat pipe heat exchanger operating in tropical buildings. International Journal of Energy Research, 27 (3), 187-202. Ltd.
  49. Y.H. Yau.(2001). Theoretical determination of effectiveness for heat pipe heat exchangers operating in natural-ventilated tropical building. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 215 (3), 389-397.
  50. Yau Y. H., Wong S. W., Tong C. Y. and Than C. F. The utilization of heat exchangers for energy conservation in air conditioning. Pertanika J. Sci. & Technol. Supplement 9(2): 251-257 (2001), Universiti Putra Malaysia Press, Malaysia.
  51. Yau Y. H., Wong S. W., and Tong C. Y. 1999. An experimental and theoretical study on a heat pipe heat exchanger. Journal of Energy, Heat and Mass Transfer (JEHMT), Vol. 21, Madras, India, pp.105-110.
  52. Sekhar S.C., Tham K.W., Cheong K.W., Ho D. and Yau Y.H. Interim Report on Indoor Air Quality Audit of NUS Administration Building , pp. 1-16, SBEM, National University of Singapore, Singapore, August 1996.
Books
  1. Yau Y.H. (2016). Inaugural Lecture - Heating, Ventilating and Air Conditioning : Design Issues & Challenges in the Tropics. Kuala Lumpur : University of Malaya Press
  2. Z. Hamid, I. Othman, Y.H. Yau, K.S. Lim, A.Badarudin, N.N.N. Ghazali, M. Syarizal, C.P. Chang, S. Hasbi, Y.C. Lian, H.L. Pean. Guide to Green Building Design in Malaysia, 2nd Draft (fourth revision) Available online for comment http://www.cream.com.my [To be published by CREAM-CIDB, Malaysia].
  3. Yau Y.H. Modul Pembelajaran Lukisan Kejuruteraan. Multimedia Technology Enhancement Operation Sdn Bhd (METEOR), Kuala Lumpur, 1999.
Article in Proceeding
  1. R Sulaiman, S N Kamaruzzaman, Y H Yau (2019). Indoor air quality performance in air-conditioned museum gallery, IOP Conf. Series: Materials Science and Engineering, 609 (042098).
  2. M. Ahmadzadehtalatapeh, YH Yau, Determining the optimum operating and design parameters of an air conditioning system: A simulation study. 25th Annual International Mechanical Engineering Conference (ISME 2017) Proceedings, May 2-4, 2017, Tarbiat Modares University.
  3. Yat H YAU, Heng K LOW. Modeling of a Hybrid Solar Radiant Cooling System in a High-Rise Building in Malaysia. Indoor Air 2016 Proceedings, Ghent, Belgium July 3-8, 2016.
  4. C. J. Tan, A. Aslian, B. Honarvar, J. Puborlaksono, Y. H. Yau and W. T. Chong, Estimating surface hardening profile of blank for obtaining high drawing ratio in deep drawing process using FE analysis, IOP Conf. Series: Materials Science and Engineering 103 (2015) 012047 doi:10.1088/1757-899X/103/1/012047.
  5. Yau, Yat, Keng H CHUAH, Ming R TEY, Pak N YIP, Cheng S LIM, Tet H, CHONG and Krishnan RAJAGOPAL, FEASIBILITY STUDY OF USING HEAT RECOVERY DEVICES IN HVAC SYSTEMS IN A BUILDING IN THE TROPICS, Indoor Air 2014 Proceedings, Hong Kong SAR, China, 7-12, July 2014.
  6. Y.H. YAU, B.T. CHEW and A.Z.A. SAIFULLAH, 2012. Thermal comfort temperature range study for workers in a factory in Malaysia. HB2012 Proceedings, Brisbane, Australia, 8-13, July 2012.
  7. Oshkour, A.A., Abu Osman, N.A., Davoodi, M.M., Bayat, M., Yau, Y.H., Wan Abas, W.A.B. 2011. Knee joint stress analysis in standing. IFMBE Proceedings, 35 IFMBE, pp. 179-181.
  8. Oshkour, A.A., Abu Osman, N.A., Davoodi, M.M., Bayat, M., Yau, Y.H., Wan Abas, W.A.B.2011.Impact load and mechanical respond of tibiofemoral joint. IFMBE Proceedings, 35 IFMBE, pp. 167-169.
  9. Raha Sulaiman, Syahrul Nizam Kamaruzzaman, Yau Yat Huang, INVESTIGATION OF MUSEUM INDOOR ENVIRONMENTAL QUALITY WITH MULTIPHASE APPROACH: MALAYSIAN CASE STUDIES, The 12th Asia Pacific Rim Universities (APRU) Doctoral Students Conference, 4-7 July 2011, Tsinghua University, Beijing, China. (http://apru.daf.tsinghua.edu.cn/).
  10. Y.H. Yau, L.C. Ding and B.T. Chew, Thermal comfort and Indoor Air Quality at Green Building in Malaysia, United Kingdom-Malaysia-Ireland Engineering Science Conference, Kuala Lumpur, 12-14 July 2011.
  11. Yat Huang Yau, Bee Teng Chew, Aza Saifullah, THERMAL COMFORT IN LECTURE HALLS IN THE TROPICS. Proceedings: ISHVAC 2011,Nov. 6-9, 2011, Shanghai, China. pp. 309-317.
  12. Y.H. Yau and K.S. Phuah, The indoor air quality study to an air-conditioned pharmaceutical lab in the tropics. Proceedings of IAQ2010, Atlanta: American 3 Society of Heating, Refrigerating, and Air- Conditioning Engineers, Inc. 2010.
  13. Y.H. Yau, Development and application of an indoor environmental quality audit to hospital wards in the tropics. Proceedings of 7th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings, paper 75-96, August 15-18, Syracuse, New York, U.S.A.
  14. C.K. Chang, M.F. Jentsch, P.A.B. James, Y.H. Yau and A.S. Bahaj. Performance Implication of Climate Change on Heating, Ventilating and Air Conditioning (HVAC) systems in Malaysia. Proceedings of World Renewable Energy Congress 2009 Asia, 19-22 May 2009, Bangkok, Thailand, pp. 827-832 (ISI Indexed).
  15. F.J. Wang, B.C. Yang, Y.H. Yau, C.Y. Sun, Z.R. Liu, Performance Analyses and Evaluation of a Bio-cleanroom for Vaccine Production, 10th Asia Pacific Conference on the Built Environment, Green Energy for Environment, ASHRAE Region XIII, Paper C-07, November 5-6(Thu.-Fri.), 2009, Kaohsiung, Taiwan.
  16. Mark F. Jentsch, Choo Khean Chang, Patrick A. B. James, AbuBakr S. Baha and Yat H. Yau. Development of Climate Change Adapted Weather Files for Building Performance Simulation: Implications for Southeast Asia. Proceedings of World Renewable Energy Congress 2009 Asia, 19-22 May 2009, Bangkok, Thailand, pp. 1338 1343 (ISI Indexed).
  17. N.N.N. Ghazali, Y.H. Yau, A.Badarudin, Y.C. Lim. Computational fluid dynamics (CFD) simulation of drag reduction by riblets on automobile. The Proceeding of ISCM II & EPMESC XII, 29 November 3 December 2009, Paper No. 550, Hong Kong-Macau.
  18. Nikolaos Bakker, Choo Khean Chang, Patrick A. B. James, Mark Jentsch, Yat Huang Yau and AbuBakr Bahaj. User Feedback Strategies to Enhance the Performance of Mixed Mode Buildings in Tropical Climates. Proceedings of World Renewable Energy Congress 2009 Asia, 19- 22 May 2009, Bangkok, Thailand (ISI Indexed).
  19. S.L. Khew, Y.H. Yau, W.B. Ng, F.J. Wang, Performance Improvement of the Ventilating System and Airborne Contamination in an Operating Room, 10th Asia Pacific Conference on the Built Environment-Green Energy for Environment, ASHRAE Region XIII, Paper E-04, November 5-6(Thu.-Fri.), 2009, Kaohsiung, Taiwan
  20. Y.H. Yau and C.B. Lim. The Use of Heat Recovery Devices for Reducing Energy Consumption of Treating Ventilation Air in a Tropical Operating Theatre. Proceedings of The Fifth International Workshop on Energy and Environment of Residential Buildings and The Third International Conference on Built Environment and Public Health, 29 -31 May 2009, Guilin, Guangxi, China (ISI Indexed).
  21. Y.H. Yau and Muhammad Hafiz Azizan, Preliminary Study on Climate Change Implications on Thermal Comfort and Indoor Environmental Quality in a Library Building in the Tropics, Techpos 2009 Proceedings, 14- 15th December 2009, Legend Hotel, Kuala Lumpur, Malaysia.
  22. Y.H. Yau, N.N.N. Ghazali, A. Badarudin and F.C. Goh. CFD Simulation on thermal comfort in a library building in the tropics. Proceeding of ISCM II & EPMESC XII, 29 November 3 December 2009, Paper No. 549, Hong Kong - Macau.
  23. YH Yau and M.Ahmadzadehtalatapeh, Experimental Investigation of the Thermal Performance of an Air-to- Air Horizontal Heat Pipe Heat Exchanger, Techpos 2009 Proceedings, 14-15th December 2009, Legend Hotel, Kuala Lumpur, Malaysia
  24. YH Yau and Muhammad Hafiz Azizan, Preliminary Study on Climate Change Implications on Thermal Comfort and Indoor Environmental Quality in a Library Building in the Tropics, Techpos 2009 Proceedings, 14-15th December 2009, Legend Hotel, Kuala Lumpur, Malaysia
  25. YH Yau, CK Chang, Mark F. Jentsch, Patrick A.B. James and AbuBakr S. Bahaj, Viability Studies on HVAC Systems in a Future Library Located in the Tropics, Techpos 2009 Proceedings, 14-15th December 2009, Legend Hotel, Kuala Lumpur, Malaysia.
  26. Yat H. Yau, Bee T. Chew and Chuan S. Yau. Adaptive Thermal Comfort Model Study in the Tropics. Proceedings of World Renewable Energy Congress 2009 Asia, 19-22 May 2009, Bangkok, Thailand, pp. 1386 1391 (ISI Indexed).
  27. Yat Huang Yau, Muhammad Hafiz Azizan, Choo Khean Chang, Mark F. Jentsch, Patrick A. B. James and AbuBakr S. Bahaj. The Implication of Climate Change on Thermal Comfort Level in a Notional Building in the Tropics. Proceedings of World Renewable Energy Congress 2009 Asia, 19-22 May 2009, Bangkok, Thailand, pp. 1304 -1309 (ISI Indexed).
  28. Yat. H. Yau and M.H.H. Mohyi. CFD Simulation and Analysis of Thermal Comfort Level in an Operating Theatre in the Tropics. Proceedings of The 6th International Symposium on Heating, Ventilating and Air Conditioning, Nov 6-9, Nanjing, China, pp. 1360-1368 (ISI Indexed).
  29. Chong W.T. and Yau Y.H., 2008. Conceptual Design of Wind-Solar Hybrid Renewable Energy Generation system Power-Augmentation-Guide-Vane and Incorporated Rain Water Collection Feature. Proceedings of seminar on Progress of solar Energy Research & Development 2008, 21 & 22 October 2008, pp. 51-56, Bangi, Malaysia.
  30. Khosravi S., Mahlia T.M.I and Y.H.Yau, 2008, Feasibility study of hybrid Wheel Desiccant Dehumidification Cooling Systems in Malaysia, International Graduate Conference on Engineering and Science (IGCES 2008), 23-24 December 2008, Universiti Teknologi Malaysia, Skudai Campus, Johor Bahru, Malaysia
  31. Yau Y.H. Energy Saving in Tropical HVAC System in Hospitals - A Simplified TRNSYS Simulation. Proceedings of The International Conference on Modeling and Simulation 2006 (MS2006), Kuala Lumpur. April 3-5, Keynote Speaker 4, pp. 1 - 6 (2006).
  32. Yau Y. H. and Lee S.Y. Experimental and theoretical performance analysis of heat pipe heat exchangers for building HVAC systems in tropical climates. Proceeding of the 6th International Heat Pipe Symposium-2000 (6IHPS-2000), Chiang Mai, Thailand, November 5-9, pp. 184-191 (2000).
  33. Yau Y.H., Siaw T.C. and Wong C.K. An Experimental Study of Heat Pipe Heat Exchanger for Water Model. Published at CAFEO 18, Vietnam (2000).
  34. Yau Y. H., Wong S. W. and Than C. F. Thermal performance of heat pipe heat exchangers. The 7th JSPS- VCC Seminar on Integrated Engineering, 7-8 Nov 1998, Kuala Lumpur, Malaysia, pp. 408-413 (1998).
  35. Yau Y.H., Masjuki H.H. and Mohd Rom T. Postgraduate Engineering Education in Malaysia. Proceedings of The South East Asia Regional Seminar & Workshop on Higher Engineering Education Network: Seminar and Workshop 25- 27 February 1997 Bandung, Indonesia-Jakarta. pp. 62-65 (1997).

RESEARCH INTEREST


  • Energy Savings In Tropical HVAC Systems Using HPHX. (Energy Savings, HVAC, HPHX)
  • Thermal Comfort Study In Tropical Buildings (IEQ, PMV, PPD, Adaptive Model, Tropics)
  • Refrigeration Systems Optimisation (Refrigerating Cycle, Outdoor Air Conditions, Climate Change)
  • Trnsys Simulation and Optimisation Of Chilled Water Coils, Hot Water Coils, Heat Pipe Heat Exchangers And Variable Speed Fans (Heat Transfer, condensation, energy efficiency)
  • Energy Savings and Climate Change Impact Studies in Green Buildings in Malaysia (Energy Savings and Climate Change)

RESEARCH PROJECT


National
  1. 2024 - 2027, Fundamental Research Grant Scheme (FRGS)
    Investigating Factors Affecting Thermal Performance And Occupant Comfort In Courtyard Configurations Of High-rise Housing Environments In Malaysia ( Co-Researcher)
  2. 2021 - 2023, RU Geran
    Design Optimisation Of A Prototype Mobile Isolation And Transportation System With Ct Compatibility For Intra-hospital Transfer In A Covid-19 Designated Hospital ( Principal Investigator(PI))
  3. 2019 - 2022, Others MOHE - Top 100 (IIRG)-IISS
    The Study Of Climate Change Implications On Bin Method For Air Conditioning Systems Installed In Malaysia Building ( Principal Investigator(PI))
  4. 2019 - 2022, Others MOHE - Top 100 (IIRG)-IISS
    Enhancement On Thermal Efficiency Of Novel Nanofluids In Solar Collector System ( Co-Researcher)
  5. 2020 - 2022, Partnership Grant
    Stratum Cooling Air Distribution For Thermal Comfort Applied To High People Density Assembly ( Principal Investigator(PI))
  6. 2012 - 2014, Postgraduate Research Grant(PPP)
    1.THE CONTROL ENGINEERING STUDY TO IMPROVE THE ENERGY EFFICIENCY AND THERMAL COMFORT IN GREEN BULDINGS IN THE TROPICS 2.ENERGY ANALYSIS OF GREEN OFFICE BUILDINGS IN THE TROPICS ( Principal Investigator(PI))
  7. 2010 - 2013, Geran Penyelidikan Universiti Malaya (UMRG)
    EXPERIMENTAL AND THEORETICAL INVESTIGATION OF HOSPITAL OPERATING ROOM (OR) AIR DISTRIBUTION ( Principal Investigator(PI))
  8. 2011 - 2013, Postgraduate Research Grant(PPP)
    A COMPREHENSIVE STUDY OF THERMAL BUOYANCY USING COMPUTATIONAL MODELLING, SIMULATION AND ANALYSIS IN TROPICAL BUILDINGS 2)CLIMATE CHANGE IMPLICATIONS FOR COMMERCIAL BUILDINGS AND THEIR TECHNICAL SERVICES IN THE TROPICS ( Principal Investigator(PI))
  9. 2010 - 2012, Geran Penyelidikan Universiti Malaya (UMRG)
    RESIDUAL THERMAL ANALYSIS AND FATIQUE CRACK PROPAGATION IN WELDED ALUMINIUM ALLOY 2024 IN CASE OF TRANSIENT AND STEADY STATE CONDITION ( Principal Investigator(PI))
  10. 2010 - 2011, Geran Penyelidikan Universiti Malaya (UMRG)
    Experimental and Theoretical Investigation of Hospital Operating Room (OR) Air Distribution in the Tropics ( Principal Investigator(PI))
  11. 2007 - 2010, ScienceFund
    THE THERMAL COMFORT STUDY IN MALAYSIAN HOSPITALS (01/08/2007 to 30/11/2010) Project No : 16-02-03-6004 ( Principal Investigator(PI))
  12. 2007 - 2010, Fundamental Research Grant Scheme (FRGS)
    THE THERMAL COMFORT STUDY IN MALAYSIA HOSPITALS (FR092-2007A & FP049-2007C) ( Principal Investigator(PI))
  13. 2007 - 2009, ScienceFund
    The Thermal Comfort Study in Malaysian Hospitals ( Principal Investigator(PI))
  14. 2006 - 2009, ScienceFund
    THE USE OF A HPHX SYSTEM FOR REDUCING ENERGY CONSUMPTION OF TREATING VENTILATION AIR IN HOSPITALS LOCATED IN TROPICAL CLIMATES ( Principal Investigator(PI))
  15. 2006 - 2008, ScienceFund
    The Use of A HPHX System for Reducing Energy Consumption of Treating Ventilation Air in Hospitals Located in Tropical Climates. ( Principal Investigator(PI))
Private
  1. 2016 - 2026, Private Funding
    Heat Transfer Analysis Of Evaporative/water Cooled Condensers Installed With Mini Tubig ( Principal Investigator(PI))
International
  1. 2024 - 2024, The Fulbright Specialist Program (FSP),
    Improving Indoor Air Quality and Occupant Health for Affordable Housing in Hot and Humid Climates, University of Colorado At Boulder, Boulder ( Co-Researcher)
  2. 2019 - 2023, Higher Education Commission of Pakistan (HEC) Scholarship
    CFD STUDIES ON STRATUM VENTILATION INSTALLED WITH A VRF/VRV SYSTEM FOR TROPIC BUILDINGS, Higher Education Commission of Pakistan (HEC) ( Principal Investigator(PI))
  3. 2022 - 2022, MINI RESEARCH GRANT - Institution of Mechanical Engineers
    AIRBORNE PARTICLE DISPERSION AND CHARACTERISTICS STUDY AND IMPACT ON INDOOR ENVIRONMENT FOR ENSURING WELL-BEING OF COMMUNITIES, Institution of Mechanical Engineers ( Co-Researcher)
  4. 2008 - 2010, The UK Prime Minister Initiative 2 (PMI2) Research Grant
    Climate change implications for buildings and their technical services in tropical and moderate climates ( Principal Investigator(PI))
  5. 2001 - 2004, NZAID (New Zealand Agency of International Development)
    Energy Savings in Tropical HVAC Systems Using Heat Pipe Heat Exchangers ( Principal Investigator(PI))
  6. 2001 - 2004, International Funding
    Energy Savings in Tropical HVAC Systems Using Heat Pipe Heat Exchangers (HPHXs) ( Principal Investigator(PI))
University
  1. 2007 - 2008, Postgraduate Research Grant(PPP)
    The Energy and Economic Studies of an Ice Slurry Cooling Coil ( Principal Investigator(PI))
  2. 2005 - 2006, Short Term Research Fund (Vote F)(PJP)
    The HVAC Systems Re-design and Optimisation in Hospitals - A Fungus Problem Study ( Principal Investigator(PI))
  3. 2000 - 2000, Short Term Research Fund (Vote F)(PJP)
    The effect on Thermal Comfort of the Optimisation of HPHX in HVAC Systems - 2 ( Principal Investigator(PI))
  4. 1999 - 1999, Short Term Research Fund (Vote F)(PJP)
    The effect on Thermal Comfort of the Optimisation of HPHX in HVAC Systems - 1 ( Director)

CONSULTANCY PROJECT


  • Professional Review and Consultation On The Performance Study of Daikin Vam, Daikin Research & Development Malaysia Sdn. Bhd., Professional Consultant (Ir., Ar., Sr., Ts., dsbnya)
    24 Aug 2022 - 30 Jun 2023 (National)
  • Professional Review and Consultation On The Test Report of Apu Mc 30 Performance (Upum/2021/Iz/04), Daikin Research & Development Malaysia Sdn Bhd, Professional Consultant (Ir., Ar., Sr., Ts., dsbnya)
    24 Aug 2022 - 31 Mar 2023 (National)
  • Professional Review and Consultation On The Test Report of Apu Mc 30 Performance, Daikin Research & Development Malaysia Sdn. Bhd., Professional Consultant (Ir., Ar., Sr., Ts., dsbnya)
    01 Sep 2022 - 01 Feb 2023 (National)
  • One-Day Training On Principles of Heating, Ventilation, and Air Conditioning in Buildings, Japan Air Filter Malaysia Sdn Bhd
    01 Nov 2018 - 01 Nov 2018 (International)
  • Professional Literature Review On The Effects of Human Health, Microorganism Growth and Thermal Comfort, Daikin Research & Development Malaysia Sdn. Bhd.
    01 Mar 2017 - 01 Mar 2018 (National)
  • Renovation of Lifescience Diagnostic Accelerator, Innovation Incubator (I2u) Building, Innovation Incubator (I2U) Building
    01 Oct 2016 - 01 Oct 2017 (National)
  • Combustion of Dewatered Poultry Sludge in a Laboratory Scale Fluidized Bed Combustor, Universiti Teknologi Petronas
    01 Jul 2016 - 01 Jul 2016 (National)
  • Thermal Shrinkage and The Formation of Gas Voids in Waxy Crude Oil, Universiti Teknologi Petronas
    01 Jul 2016 - 01 Jul 2016 (National)
  • Mqa Panel for Master of Engineering (Mechanical Engineering) 2+2 in Collaboration With University of Southampton, UK (Usmc), University of Southampton, UK (USMC)
    01 Dec 2014 - 01 Dec 2014 (International)
  • Chairman Evaluation Panel for Master of Science in Mechanical Engineering (Area of Specialization) Universiti Teknologi MARA (UiTM), UNIVERSITI TEKNOLOGI MARA (UiTM)
    01 Dec 2014 - 01 Dec 2014 (National)
  • Ppp Grant Phase 2/2014 Evaluation_appointment as Panel Evaluator of Ppp Grant Phase 2/2014 (2014b), University of Malaya
    01 Dec 2014 - 01 Dec 2014 (National)
  • Chief Panel for Engineering Accreditation Council (Eac), Board of Engineers, Malaysia - for Evaluation of B.Eng. (Mechanical_marine Technology) At Universiti Teknologi Malaysia Sekudai (UTM), Malaysia., Universiti Teknologi Malaysia Sekudai (UTM), Malaysia
    01 Dec 2014 - 01 Dec 2014 (National)
  • Hvac Systems and Thermal Environment Assessments for Unilever Sdn. Bhd. After The Retrofitting - Phase 2, Unilever Sdn. Bhd.
    01 Mar 2014 - 01 Mar 2014 (National)
  • Associate Editor for Manuscript Id Ibe-12-0204, Entitled "Thermal and Non-Thermal Germicidal Effects of Microwave Radiation On Microbial Agents.", Indoor and Built Environment
    01 Jan 2012 - 01 Jan 2014 (International)
  • Hvac Systems and Thermal Environment Assessments for Unilever Sdn. Bhd. Before Retrofitting, Unilever Sdn. Bhd.
    01 Mar 2013 - 01 Mar 2013 (National)
  • Technology Development & Economic for Energy Efficient Building Envelopes in Construction, Construction Research Institute of Malaysia
    01 Mar 2011 - 01 Mar 2013 (National)
  • Technology Development & Economic for Energy Efficient Building Envelopes in Construction, CREAM (CIDB)
    01 Jan 2011 - 01 Jan 2013 (National)
  • Reviewing Manuscript # Jpme-12-0012 Entitled "Interfacial Deformation and Secondary Drop Generation During Water Drop Impacts Into Deep Oil Pools" for Journal of Process Mechanical Engineering., Journal of Process Mechanical Engineering
    01 Jan 2012 - 01 Jan 2012 (International)
  • Perlantikan Sebagai Ahli Panel Penilai Universiti Malaya, QMEC, Universiti Malaya
    01 Jan 2012 - 01 Jan 2012 (National)
  • Sarawak International Medical Centre & Jabatan Kerja Raya, Sarawak (Phase 1), SIMC, SARAWAK
    01 Aug 2011 - 01 Aug 2011 (National)
  • Sarawak International Medical Centre & Jabatan Kerja Raya, Sarawak, Sarawak International Medical Centre & Jabatan Kerja Raya, Sarawak
    01 Aug 2011 - 01 Aug 2011 (National)
  • Consultation On Hvac, Its, Ieq and Cooling Load Designs, Postgraduate Students and Visiting Guests
    01 Jul 2011 - 01 Jul 2011 (National)
  • Preliminary Hvac Systems Assessment Report for Ot-1 Hsc Medical Center, HSC Medical Center
    01 Jul 2011 - 01 Jul 2011 (National)
  • Boiler Optimization With Cfd-Flue Gas Trace Simulation, Mackenzie Industries SDN BHD, Malaysia
    01 Mar 2008 - 01 Mar 2009 (National)
  • Hvac & R Systems Forensic Study At Exam Building, University of Malaya, University of Malaya
    01 Nov 2008 - 01 Nov 2008 (University)
  • Indoor Air Quality Study in Hospitals, Ministry of Health Malaysia
    01 Nov 2007 - 01 Nov 2007 (National)
  • Thermal System Design and Optimization, Universiti Tenaga Nasional
    01 Nov 2007 - 01 Nov 2007 (National)
  • Testing On a Machine Part That Moving in a Linear Motion, Mr. Bao Kiew Wu (Director), Friendly Homes Sdn Bhd
    01 Nov 1999 - 01 Nov 1999 (National)

PAPER PRESENTED


CONFERENCE
  1. Experimental and theoretical performance analysis of heat pipe heat exchangers for building HVAC systems in tropical climates., The 6th International Heat Pipe Symposium-2000 (6IHPS-2000), IHPS (International) (05 Nov 2000 - 09 Nov 2000)
PLENARY SPEAKER
  1. Energy Saving in Tropical HVAC System in Hospitals - A Simplified TRNSYS Simulation, The International Conference on Modeling and Simulation 2006 (MS2006),  (International) (03 Apr 2006 - 05 Apr 2006)
INVITED SPEAKER
  1. Guide to the COVID-19 for Healthcare Buildings ASHRAE EPIDEMIC TASK FORCE, Webinar: Ventilation and COVID-19, The Department of Social and Preventive Medicine, Faculty of Medicine, University of Malaya (National) (28 Dec 2020 - 28 Dec 2020)
  2. ENERGY USE ANALYSIS OF THE VARIABLE REFRIGERANT FLOW (VRF) SYSTEM VERSUS THE MULTI - SPLIT UNIT USING TRNSYS, Seminar on Ecostructive VRV Installation System , Wenge Technology Sdn. Bhd. (a subsidiary of Wenge Technology Co,. Ltd.) (National) (10 Oct 2019 - 10 Oct 2019)
  3. Potential of vapour decontamination for improving IAQ - Making use of tea tree oil: The case of a healthcare facility, 2018 INTERNATIONAL CONFERENCE ON FUTURE HEALTHCARE AND ECONOMIC DEVELOPMENT AT NATIONAL CHENG KUNG UNIVERSITY, TAIWAN, CHINA ON 05 AUG 2018 HINGGA 09 AUG 2018, NATIONAL CHENG KUNG UNIVERSITY, TAIWAN, CHINA. (International) (05 Aug 2018 - 09 Aug 2018)
  4. Engineers Act 1967 (Revised 2015), BEM Briefing for Undergraduate Students - Engineers Act 1967, Faculty of Engineering (University) (01 Mar 2017 - 01 Mar 2017)
  5. THE EVALUATION OF DESIGN GUIDELINES FOR STRATUM VENTILATION IN THE TROPICS, 11th OYL R&D Technical Forum, Daikin Malaysia (National) (03 Dec 2015 - 03 Dec 2015)
  6. ONE DAY WORKSHOP ON COMPARISION BETWEEN VRF AND CHILLER SYSTEM AND THE EVALUATION OF DESIGN GUIDELINES FOR STRATUM VENTILATION IN THE TROPICS, ONE DAY WORKSHOP ON COMPARISION BETWEEN VRF AND CHILLER SYSTEM AND THE EVALUATION OF DESIGN GUIDELINES FOR STRATUM VENTILATION IN THE TROPICS, Institution of Engineers, Malaysia (National) (25 Jun 2015 - 25 Jun 2015)
  7. Industrial talk by student branch advisor: Ir Dr Yau, ASHRAE Membership Drive 2014, ASHRAE (University) (01 Oct 2014 - 01 Oct 2014)
  8. Sharing session on complex engineering, FYP and EDP for EAC accredited Engineering Programmes, Seminar on EAC accredited Engineering Programmes, FOSTEM, INTI International University, Nilai (National) (05 Sep 2014 - 05 Sep 2014)
  9. INDOOR AIR QUALITY AND CLIMATE CHANGE IMPACTS ON AIR-CONDITIONING AND MECHANICAL VENTILATION (ACMV) SYSTEMS IN COMMERCIAL BUILDINGS IN THE TROPICS, ONE -DAY SEMINAR ON ""CLIMATIC CHANGE AND GLOBAL WARMING ; ENGINEER'S ROLE AND CHALLENGES" at WISMA IEM, PETALING JAYA, SELANGOR, on 26 JUN 2014 , Environmental Technical Division (National) (26 Jun 2014 - 26 Dec 2014)
  10. Feasibility Study of Solar HVAC Systems In THE Tropics, Technical Seminar JKR - Sustainability & Innovation in Mechanical Engineering, JKR, Malaysia. (National) (07 Oct 2013 - 07 Oct 2013)
  11. Malaysia experience in attracting the best students into engineering - University of Malaya s Context , 2010 ASEE Global Colloquium on Engineering Education, ASEE, USA (International) (18 Oct 2010 - 21 Oct 2010)
  12. CFD Simulation and Analysis of Thermal Comfort Level in an Operating Theatre in the Tropics , Invited speaker for seminar on HVAC&R systems in the tropics: implications of climate change Organised by IEM, ASHRAE, UM, UOS and UniKL on 29/6/2010 at Armada Hotel, PJ., IEM, Malaysia (International) (29 Jun 2010 - 29 Jun 2010)
EVENT ORGANISER
  1. The indoor air quality study to an air-conditioned pharmaceutical lab in the tropics, ASHRAE IAQ Conference Malaysia 2010 - Airborne Infection Control Ventilation, IAQ & Energy, ASHRAE, USA (International) (10 Nov 2010 - 12 Nov 2010)
ORAL PRESENTER
  1. Formulation of Final Resistance of the Air Filters, 13th Multidisciplinary International Student Workshop (MISW2022), Tokyo Institute of Technology, Tokyo, Japan (International) (08 Aug 2022 - 09 Aug 2022)
POSTER PRESENTER
  1. Particulate Matter Exposure and Cumulative Inhaled Dose During Commuting by Subways in a Northeast City, China, 2022 AUA Academic Conference on Sustainable Energy and Green Technology (AUA-SEGT 2022), Centre for Energy Sciences, Universiti Malaya, 50603 Kuala Lumpur, Malaysia (International) (21 Feb 2022 - 23 Feb 2022)
  2. Rethinking the Limitations of Research on Occupants Window-Opening Behavior: A Review, 2022 AUA Academic Conference on Sustainable Energy and Green Technology (AUA-SEGT 2022), Centre for Energy Sciences, Universiti Malaya, 50603 Kuala Lumpur, Malaysia (International) (21 Feb 2022 - 23 Feb 2022)
  3. The Distribution and Influential Factors of PM2.5 in The Carriages of Beijing Subway, 2022 AUA Academic Conference on Sustainable Energy and Green Technology (AUA-SEGT 2022), Centre for Energy Sciences, Universiti Malaya, 50603 Kuala Lumpur, Malaysia (International) (21 Feb 2022 - 23 Feb 2022)
PRESENTER
  1. A COMPARISON STUDY FOR ACTIVE CHILLED BEAM AND VARIABLE AIR VOLUME SYSTEMS FOR AN OFFICE BUILDING, Applied Energy Symposium and Forum 2018: Low carbon cities and urban energy systems, CUE2018, 5 7 June 2018, Shanghai, China, The scientific committee of the Applied Energy Symposium and Forum 2018: Low carbon cities and urban energy systems, CUE2018. (International) (05 Jun 2018 - 07 Jun 2018)
  2. A Comprehensive Case Study of Climate Change Impacts on the Cooling Load in an Air-Conditioned Office Building in Malaysia, World Engineers Summit Applied Energy Symposium & Forum: Low Carbon Cities & Urban Energy Joint Conference, WES-CUE 2017, 19 21 July 2017, Singapore, The Institution of Engineers, Singapore (IES) (International) (19 Jul 2017 - 21 Jul 2017)
  3. Modeling of a Hybrid Solar Radiant Cooling System in a High-Rise Building in Malaysia, Research Talk by Professor Ir. Dr. Yau Yat Huang, Department of Mechanical Engineering, University of Malaya (University) (12 Nov 2016 - 12 Nov 2016)
  4. Heating, Ventilating and Air Conditioning : Design Issues & Challenges in the Tropics, INAUGURAL LECTURE BY PROF. IR. DR YAU YAT HUANG: 30 SEPTEMBER 2016 (FRIDAY), Faculty of Engineering, University of Malaya (University) (30 Sep 2016 - 30 Sep 2016)
  5. Modeling of a Hybrid Solar Radiant Cooling System in a High-Rise Building in Malaysia., INDOOR AIR 2016 in GHENT UNIVERSITY, GHENT, BELGIUM on 03 JUL 2016 - 08 JUL 2016, GHENT UNIVERSITY (International) (03 Jul 2016 - 08 Jul 2016)
  6. FEASIBILITY STUDY OF USING HEAT RECOVERY DEVICES IN HVAC SYSTEMS IN A BUILDING IN THE TROPICS, THE 13TH INTERNATIONAL CONFERENCE ON INDOOR AIR QUALITY AND CLIMATE (INDOOR AIR 2014), International Society of Indoor Air Quality and Climate (International) (07 Jul 2014 - 14 Jul 2014)
  7. Thermal comfort temperature range study for workers in a factory in Malaysia, The 2012 Healthy Buildings Conference, International Society of Indoor Air Quality and Climate (International) (08 Jul 2012 - 13 Jul 2012)
  8. THERMAL COMFORT IN LECTURE HALLS IN THE TROPICS, 7th International Symposium on Heating, Ventilation and Air Conditioning, ISHVAC 2011 (International) (06 Nov 2011 - 09 Nov 2011)
  9. Development and application of an indoor environmental quality audit to hospital wards in the tropics, 7th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings, paper 75-96, August 15-18, Syracuse, New York, U.S.A. , Syracuse University (International) (15 Aug 2010 - 18 Aug 2010)
  10. CFD Simulation on thermal comfort in a library building in the tropics, ISCM II & EPMESC XII, City University of Hong Kong and University of Macau (International) (29 Nov 2009 - 03 Dec 2010)
  11. CFD Simulation and Analysis of Thermal Comfort Level in an Operating Theatre in the Tropics, The 6th International Symposium on Heating,, Southeast University of China (International) (06 Nov 2009 - 09 Nov 2010)
  12. The Implication of Climate Change on Thermal Comfort Level in a Notional Building in the Tropics, World Renewable Energy Congress 2009 Asia (01 Jun 2009)
  13. Adaptive Thermal Comfort Model Study in the Tropics, World Renewable Energy Congress 2009 Asia (01 Jun 2009)
  14. Development of Climate Change Adapted Weather Files for Building Performance Simulation: Implications for Southeast Asia, World Renewable Energy Congress 2009 Asia (01 Jun 2009)
  15. Performance Implication of Climate Change on Heating, Ventilating and Air Conditioning (HVAC) systems in Malaysia, World Renewable Energy Congress 2009 Asia (01 Jun 2009)
  16. The Use of Heat Recovery Devices for Reducing Energy Consumption of Treating Ventilation Air in a Tropical Operating Theatre, The Fifth International Workshop on Energy and Environment of Residential Buildings and The Third International Conference on Built Environment and Public Health (International) (29 May 2009 - 31 May 2009)
  17. Feasibility study of hybrid Wheel Desiccant Dehumidification Cooling Systems in Malaysia, International Graduate Conference on Engineering and Science (IGCES 2008), 23-24 December 2008 (01 Mar 2008)
  18. ENERGY SAVINGS AND DEHUMIDIFICATION IN TROPICAL HVAC SYSTEMS IN HOSPITALS A SIMPLIFIED TRNSYS SIMULATION, International Networking of Young Scientists (INYS) on Renewable Energy (12 Nov 2007 - 16 Nov 2007)
  19. Energy Savings in Tropical HVAC Systems Using Heat Pipe Heat Exchangers, THE FIRST CONFERENCE OF NZAID SCHOLARS: Research and Education for Development (International) (12 Dec 2002 - 12 Dec 2002)
  20. An Experimental Study of Heat Pipe Heat Exchanger for Water Model, CAFEO 18 (01 Jun 2000)
  21. The utilization of heat exchangers for energy conservation in air conditioning, World Engineering Congress, K.L. (International) (19 Jul 1999 - 21 Jul 1999)
  22. Thermal performance of heat pipe heat exchangers., 7th JSPS-VCC Seminar on Integrated Engineering (University) (07 Dec 1998 - 08 Dec 1998)
  23. Postgraduate Engineering Education in Malaysia., The South East Asia Regional Seminar & Workshop on Higher Engineering Education Network (01 Jun 1997)
OTHERS
  1. Unveil the Secret of A/C System in the Wuhan Makeshift Hospital, Webinar on Unveil the Secret of A/C System in the Wuhan Makeshift Hospital, ASHRAE Pakistan Chapter (International) (12 May 2020 - 12 May 2020)
  2. Introduction to ASHRAE Design Guide for Cleanroom, MASHRAE Webinar - Introduction to ASHRAE Design Guide for Cleanroom, MASHRAE (National) (09 Apr 2020 - 09 Apr 2020)
  3. Indoor air quality performance in air-conditioned museum gallery, IAQVEC 2019, Politecnico di Bari (International) (05 Sep 2019 - 09 Sep 2019)
  4. Determining the optimum operating and design parameters of an air conditioning system: A simulation study, 25th Annual International Mechanical Engineering Conference (ISME 2017), Tarbiat Modares University (International) (02 May 2017 - 04 May 2017)
  5. Current Issues of ACMV systems in Malaysia, 5th Asia Oceania Konwakai, Daikin Industries, Ltd., Japan. (International) (10 Mar 2016 - 12 Mar 2016)
  6. User Feedback Strategies to Enhance the Performance of Mixed Mode Buildings in Tropical Climates, World Renewable Energy Congress 2009 Asia (01 Jun 2009)
  7. Conceptual Design of Wind-Solar Hybrid Renewable Energy Generation system Power-Augmentation-Guide- Vane and Incorporated Rain Water Collection Feature, Seminar on Progress of solar Energy Research & Development 2008 (National) (21 Oct 2008 - 22 Oct 2008)

ACADEMIC/PROF. SERVICES


Evaluation
  1. (2024) External Reviewer for Career Advancement Application to The Position of Associate Professor, National, (External Assessor)
  2. (2024) Reviewer for Journal Paper Entitled "Energy-Saving and Carbon Reduction Analysis of Series/Parallel Combination for Heat Pump and Chiller in a Hotel Building ", International, (Reviewer)
  3. (2024) Panel of The Candidature Defence - Jie Liu (S2132206/1), University, (Internal Examiner)
  4. (2024) External Examiner for Doctor of Philosophy Candidate Candidate Name: Alfellag Mohanad Abdulazez Abdulrahem, National, (External Examiner)
  5. (2024) Moderator of The Meng Research Project (Kqk7001 / Kqk7018 / Kqe7001), University, (Internal Examiner)
  6. (2024) Chairman of The Board of Examiners Meeting for Tan Shi Hao (S2024250/1), University, (Reviewer)
  7. (2024) Reviewer for The Journal Paper Entitled "Enhancing Les Efficacy in Wind Load Evaluation of Low-Rise Buildings Using Synthesized Inflow Turbulence", International, (Reviewer)
  8. (2024) Chairman of The Proposal Defence (Pd) for Candidate 22065519/1, University, (Reviewer)
  9. (2024) Chairman of The Board of Examiners Meeting for Hanna Sofia (Kha160009), University, (Reviewer)
  10. (2024) Reviewer for The Journal Paper Entitled "Numerical Study On Heat and Mass Transfer Performance of a Natural Draft Wet Cooling Tower Based On Baffle Optimization", International, (Reviewer)
  11. (2024) Panel of Mqa (Mechanical Engineering), National, (External Evaluator)
  12. (2023) Reviewer for Energy & Buildings, International, (Reviewer)
  13. (2023) External Examiner for Phd Thesis (Ghaith Yahya P96859), National, (External Examiner)
  14. (2023) Etac/Bem Head Panel for Bachelor of Engineering Technology (Hons) in Facilities Maintenance Engineering At Unikl Mitec, National, (External Evaluator)
  15. (2023) Frgs Panel 2023, University, (Internal Evaluator)
  16. (2023) Academic Evaluation At Mutah University- Jordan, International, (External Evaluator)
  17. (2022) Reviewing Manuscript # Jpme-22-0620.R1 Entitled "An Experimental Method for Evaluating Vehicle Cabin Airtightness and Ventilation Performance" for Journal of Process Mechanical Engineering, International, (Reviewer)
  18. (2022) Bem/Etac Panel for Bachelor of Engineering Technology (Hons) in Facilities Maintenance Engineering, Unikl Mitec, National, (External Assessor)
  19. (2022) Candidature Defence (Cd) Panel for Manoj Sasidharan (Kva190019), University, (Internal Assessor)
  20. (2022) Candidature Defence (Cd) for Izdihar Zahirah Binti Ibrahim (Kha150080, 17019330/2), University, (Internal Evaluator)
  21. (2022) Reviewing The Manuscript - Effect of a Novel Personal Comfort Device (Pcd) On Occupants Perceptual Responses in Three Warm Indoor Environments, International, (Reviewer)
  22. (2022) Panel for Group 1: Proposal Defence (Pd) Semester 2, Session 2021/... @ Thu 4 Aug 2022, University, (Internal Assessor)
  23. (2022) Reviewing Manuscript # Jpme-22-0620 Entitled "Development of An Experimental Method for Evaluating Cabin Airtightness and Ventilation Performance" for Journal of Process Mechanical Engineering, International, (Reviewer)
  24. (2022) Reviewing Manuscript - Evaluating The Effectiveness of Energy-Saving Retrofit Strategies for Residential Buildings, International, (Reviewer)
  25. (2022) Panel of Audit for Compliance - Master of Science (Energy Management), UTM., National, (External Evaluator)
  26. (2022) Groups 3 and 4 Research Proposal Defence Presentation - Department of Mechanical Engineering, University, (Internal Assessor)
  27. (2022) Chairman of Candidature Defence (Doctor of Philosophy) Seminar - Liu Zhenyu (17201766/1, Kva190032), University, (Internal Assessor)
  28. (2022) Reviewing of The Manuscript "Effects of The Design Parameters of Ridge Vents On Induced Buoyancy-Driven Ventilation" (10.3390/Buildings12020112) for Buildings, International, (Reviewer)
  29. (2022) Bem/Etac Panel for Politeknik Ibrahim Sultan (Pis) Interim Accreditation, National, (External Evaluator)
  30. (2022) External Examiner for Bachelor of Engineering (Mechanical Engineering), Curtin University (Malaysia), International, (External Assessor)
  31. (2020) Manuscript Number: THESCI_2020_714 Numerical Simulation of Small-sized Plate Heat Exchanger With Chevron Angle for Evaluating the Effect of Geometry on the Heat Transfer and Friction Coefficients , (Reviewer)
  32. (2020) Internal Examiner for Doctoral Thesis for Examination (Research Mode) Wang Xiao Hang (KHA160067), (Internal Examiner)
  33. (2020) Reviewer for EXPERIMENTAL INVESTIGATION OF UTILIZING HEAT PIPE HEAT EXCHANGER TO REDUCE ENERGY CONSUMPTION OF HVAC SYSTEMS IN AIRBORNE INFECTION ISOLATION ROOM OF HOSPITALS (ENB_2020_1194) , (Reviewer)
  34. (2020) Reviewer for Cooling effects on the heat transfer characteristics of a rectangular thermosyphon with PCM suspension fluid (HMT_2019_6555_R3) , (Reviewer)
  35. (2020) Analysis of 30 years hourly ambient air temperature and relative humidity records Bin weather data for HVAC systems energy calculations in Athens , (Reviewer)
  36. (2018) Similarity analysis and comparative study on the performance of counter-flow dew point evaporative coolers with experimental validation (ECM-D-18-00821) , (Reviewer)
  37. (2018) Cooling load calculation methods for stratified air distribution system: a brief review and numerical investigation (ENB_2017_2871_R2), (Reviewer)
  38. (2018) Experimental Study of a Combined Solar Floor Heating System to Find the Contribution of Sun in Buildings Heating ( ATE_2017_7295) , (Reviewer)
  39. (2018) Reviewing manuscript # IBE-18-0381 entitled "The Impact of High Rise Buildings on Pedestrian Wind Comfort Case Study: Several High Rise Buildings in Hamedan, Iran" for Indoor and Built Environment. , (Reviewer)
  40. (2018) An efficient online wkNN diagnostic strategy for variable refrigerant flow system based on coupled feature selection method (ENB_2018_1924), (Reviewer)
  41. (2018) Energy, exergy and sustainability assessments of the novel desiccant air cooling system for buildings based on experimental data (ENB_2018_586) , (Reviewer)
  42. (2018) Cooling load calculation methods for stratified air distribution system: a brief review and numerical investigation (2018) , (Reviewer)
  43. (2018) Experimental Study of a Combined Solar Floor Heating System to Find the Contribution of Sun in Buildings Heating , (Reviewer)
  44. (2017) SIMULATION AND OPTIMIZATION OF ADSORBERS IN SOLAR ADSORPTION REFRIGERATION CYCLE (2017) , (External Examiner)
  45. (2017) Experimental study on the heat recovery characteristic of a heat exchanger based on a flat micro-heat pipe array for the ventilation of residential buildings , (Reviewer)
  46. (2017) Performance analysis of pulsed flow control method for radiant slab system , (Reviewer)
  47. (2017) Natural Ventilation Effectiveness of the Round Wall-Mounted Vent Caps in Residential Kitchens , (Reviewer)
  48. (2016) CFD MODELING AND ANFIS DEVELOPMENT FOR THE HYDRODYNAMICS PREDICTION OF BUBBLE COLUMN REACTOR RING SPARGER , (Internal Examiner)
  49. (2016) Thermal Shrinkage and the Formation of Gas Voids in Waxy Crude Oil , (External Examiner)
  50. (2016) Combustion of Dewatered Poultry Sludge in a Laboratory Scale Fluidized Bed Combustor , (External Examiner)
  51. (2016) CFD Modeling and ANFIS Development for the Hydrodynamic Prediction of Bubble Column Reactor Ring Sparger , (Internal Examiner)
  52. (2015) Experimental and numerical studies on the thermal performance of ventilated BIPV curtain walls, (Reviewer)
  53. (2015) A field study of indoor thermal comfort in Colombia, (Reviewer)
  54. (2015) A questionnaire survey on sleeping environment conditioned by different cooling modes in multistory residential buildings of Singapore, (Reviewer)
  55. (2015) Indoor environmental quality and student performance in primary schools served by two cooling strategies in the tropics, (Reviewer)
  56. (2015) CFD STUDY OF FORMATION AND RISE CHARACTERISTICS OF A SINGLE BUBBLE IN BUBLE COLUMN, (Internal Examiner)
  57. (2015) A passive scalar sub-grid scale model and its application to thermal fluid simulation around a finite-length square column, (Reviewer)
  58. (2015) CFD Modeling and ANFIS Development for the Hydrodynamic Prediction of Bubble Column Reactor Ring Sparger, (Internal Examiner)
  59. (2015) CFD STUDY OF FORMATION AND RISE CHARACTERISTICS OF A SINGLE BUBBLE IN BUBLE COLUMN , (Internal Examiner)
  60. (2014) An experimental study of HPHE for cooling and dehumidification in an indirect evaporative way, (Reviewer)
  61. (2014) CFD ANALYSIS OF DOUBLE SKIN FACADE HEAT TRANSFER, (Reviewer)
  62. (2014) Integration of solar thermal and photovoltaic-thermal systems with highly energy-efficient houses for 2013 Solar Decathlon China, (Reviewer)
  63. (2014) Climate change impacts on building heating consumption in Tianjin, China, (Reviewer)
  64. (2014) Performance Evaluation of Radiant Cooling System Integrated with Air System under Different Operational Strategies, (Reviewer)
  65. (2013) OPTIMIZATION OF ENERGY CONSUMPTION IN HVAC SYSTEM BY USING SIMULATION (PJEAS_193), (Reviewer)
  66. (2013) IBE-13-0142 entitled "Effect of Platform Screen Doors on the Indoor Air Environment of an Underground Subway Station" for Indoor and Built Environment., (Reviewer)
  67. (2013) Manuscript # RSCH-00006-2013.R1 entitled "Year-round Energy Saving Potential of Stratum Ventilated Classrooms with Temperature and Humidity Control" for the ASHRAE, (Reviewer)
  68. (2012) MQA Assessor for MSc Sport Science , (Reviewer)
  69. (2012) Reviewer for manuscript entitles "The Multiphysics Modeling of Heat and Moisture Induced Stress and Strain of Historic Building Materials and Artefacts" for Building Simulation: An International Journal, (Reviewer)
  70. (2012) Reviewer for manuscript # BSE-C-12-076 entitled "Future climate change and building energy demand in Tianjin, China" for Building Services Engineering Research and Technology., (Reviewer)
  71. (2012) Harimi Djamila, Prediction and Evaluation of Thermal Comfort in Naturally Ventilated Residences in a Hot-Humid Tropical Environment, UNIVERSITI MALAYSIA SABAH, Malaysia., (External Examiner)
  72. (2012) M. M. Milar J. R. Sim es-Moreira, SOME HYDRODYNAMIC CONSIDERATIONS ON THE PERFORMANCE OF A CHILLED WATER THERMAL STORAGE TANK IN THE DISCHARGE CYCLE, (Reviewer)
  73. (2012) Li Jing1, Ji Shenttao, Li Jing, Yao Zemin, Fan Shuanshi, The study of inverted V-type heat pipe cooling mechanism based on high heat flux heating elementsArticle In Journal, (Reviewer)
  74. (2012) Sudaporn Chungloo, Kanlaya Kasorn, Joseph Khedari, Effect of Water Source in the Air Conditioned Space on Thermal Comfort in the Hot and Humid ClimateArticle In Journal, (Reviewer)
  75. (2012) Z.R. Li et. al., Evaluation of airflow pattern in wind-driven naturally 1 ventilated atrium buildings: measurement and simulation, (Reviewer)
  76. (2012) YANG Bin, S. C. SEKHAR, Interaction of dynamic indoor environment with moving person and performance of ceiling mounted personalized ventilation system, (Reviewer)
  77. (2011) Investigation of thermal performance of thermosyphon heat exchanger in an air conditioning system , (Reviewer)
  78. (2011) Experimental study on performance of heat pipe heat exchanger operating in turbocharged engine with intercooling, (Reviewer)
  79. (2011) Accrediatation evaluation for B.E. of Mechanical Engineering, Universiti Malaysia Pahang., (Reviewer)
  80. (2010) Ocipova, Vranayova and Sikula. "Minimizing of microbiological hot water risk in the Slovak Republic (B901)" Building Services Engineering Research and Technology, CIBSE, UK., (Reviewer)
  81. (2010) Field Evaluation of Thermal Comfort and Indoor Environment Quality for a Hospital in Hot and Humid Climate - F.J. Wang, M.C. Lee, T.J. Cheng, Y.Q. Law, ASHRAE IAQ2010., (Reviewer)
  82. (2010) BEM/EAC panel for B.Eng.(Mech) accreditation exercises at UTeM from 21/3/2010-23/3/2010. , (Reviewer)
  83. (2010) BEM/EAC panel for B.Eng.(Mech) accreditation exercises at Swinburne University of Technology, Kuching from 11/10/10-13/10/10, (Reviewer)
  84. (2010) BEM/EAC panel for B.Eng.(Mech) accreditation exercises at USM from 11/7/10-13/7/10, (Reviewer)
  85. (2010) Experimental study on performance of heat pipe heat exchanger operating in turbocharged engine with intercooling Experimental Thermal and Fluid Science [ETFS-D-10-00320]. , (Reviewer)
  86. (2010) Ali Akbar Khalili, Thermoelastic Analysis of Functionally Graded Material Brake Disks With Single and Double Side Contact Areas., (Internal Examiner)
  87. (2010) Analysis of thermal comfort in a residential room with insect proof screen -A case study by numerical simulation methods. Building Simulation: An International Journal [Ref.: Ms. No. BUIL-D-10-00058]., (Reviewer)
  88. (2009) Zhiwei Zhao, Kai Du (2009). Numerical Solution of Condensation from Turbulent Flow of Gasoline Vapor in Vertical Tubes. The 6th International Symposium on Heating, Ventilating and Air Conditioning, 6-9 Nov 2009, Nanjing, China, pp. 1423-1430. , (Reviewer)
  89. (2009) Bin Zhou, Xiaosong Zhang, Kai Du, Hua Qian, Paolo Tronville, Richard Rivers (2009). Esperimental Verification of Pressure Drop for a New Fibrous Filter Media Model. The 6th International Symposium on Heating, Ventilating and Air Conditioning, 6-9 Nov 2009, Nanjing, China, pp. 1479-1486., (Reviewer)
  90. (2009) Jian Gong, Yuguo Li (2009). CFD Simulation of Multiple Solutions of Smoke Flow in a Simple Building. The 6th International Symposium on Heating, Ventilating and Air Conditioning, 6-9 Nov 2009, Nanjing, China, pp. 1315-1321, (Reviewer)
  91. (2009) Zhigang Wang, Shan He, Dong Han, Yuexia Sun (2009). Jet Main Region Specification Method in CFD Simulations for Room Air Movement Analysis. The 6th International Symposium on Heating, Ventilating and Air Conditioning, 6-9 Nov 2009, Nanjing, China, pp. 1352-1359, (Reviewer)
  92. (2009) Yuemei Wang, Zhiwei Lian, Jiuwu Liu, Dahai Qi (2009). Experimental Investigation of Effects of Air Supply and Heater Positioning on Air Distribution. The 6th International Symposium on Heating, Ventilating and Air Conditioning, 6-9 Nov 2009, Nanjing, China, pp. 1345-1351, (Reviewer)
  93. (2009) Jingxian Li, Jiapeng He, Chengyin Jing, Ru Zhou (2009). Smoke-Control Effects in the Horizontal Aisle of a High-rise Building. The 6th International Symposium on Heating, Ventilating and Air Conditioning, 6-9 Nov 2009, Nanjing, China, pp. 1330-1337, (Reviewer)
  94. (2009) Ren Rong, Huang Chen, Zhao Huizhong, Cai Ning (2009). Discussion on the Energy-efficiency and Comfort of Different Air Distribution. The 6th International Symposium on Heating, Ventilating and Air Conditioning, 6-9 Nov 2009, Nanjing, China, pp. 1322-1329. , (Reviewer)
  95. (2009) Rong Ren, Chen Huang, Huizhong Zhao, Ning Cai. Discussion on the energy-efficiency and comfortof different air distribution. Proceeding of The 6th International Symposium on Heating,Ventilating and Air Conditioning (ISHVAC), Nov 6-9, Nanjing, China., (Reviewer)
  96. Mr. Ham Mow Wai, Head of ERL-Maintenance Support Sdn. Bhd. Date of Interview: 3/9/2007 Venue: IEM Building, PJ. , (External Examiner)
  97. 1998/1999 KM4000 Graduation Project
  98. 1999/2000 KMEM3180/KM4000 Thesis Project
  99. 2004/2005 KMEM4181/4282 Thesis Project
  100. 2004/2005 KMEM4181/4282 Thesis Project
  101. Tan Chew Sia M.Eng. Degree (1999) Thesis title : Computer software simulation for a vapour compression refrigeration cycle , (External Examiner)
  102. Husni M.Eng.Sc. Degree (1999) Thesis title : Tool wear and tool life prediction while machining modular cast iron using ceramic tool , (External Examiner)
  103. Abdullah Wagiman - M.Eng. Degree (2006) Thesis title : Plasma Arc Surface Modification of ASSAB 705 Steel , (External Examiner)
  104. Lamphanh Sisamouth - M.Eng. Degree (2006) title : Development and Fabrication of Conformal Cooling Channel for Injection Mold Through Machining and Brazing Technology , (External Examiner)
  105. An Environmental Friendly and Cost Effective Way of Waste Heat Recovery from Split Air Conditioning System
  106. Modeling and Simulation of a Heat Pump s Hermetic Reciprocating Compressor Using Refrigerants R22 and R407C.
  107. Performance Study of Water-To-Water Heat Pump Using Non-Azeotropic Refrigerant Mixtures R407C.
  108. Finite Element Modelling of Cutting Tool Stresses During Machining
  109. Analysis of Natural Convection in a Porous Cavity Saturated With Cold Water Using a Thermal Non-Equilibrium Model.
  110. Mitigation of the Convective Heat Flux to a Nocturnal Radiative Cooling Surface by Wind Shields: Simulation and Laboratory Investigation.
  111. Performance Simulation and Thermodynamic Analysis of HRSG in Combined Cycle Power Plant
  112. Optimization of Triple Pressure Heat Recovery Steam Generator in Combined Cycle Power Plant.
  113. A Preliminary Study of Hygrothermal Performance of Concrete Walls and Development of a Mathematical Model Simulation Under Hot Humid Climate of Thailand.
  114. 2000/2001 KMEM3180 Thesis Project
  115. Mohd Hazzah Ahmad Siron - M.Eng. Degree (2008) Thesis title : Energy and Economic Analyses of District Cooling Ice Thermal Storage System in Malaysia. , (External Examiner)
  116. Tan Teik Ghee - M.Eng. Degree (2008) Thesis title : Light Weight Frame Structure for Motorcycle Design. , (External Examiner)
  117. Chan Pei Lee - M.Eng. Degree (2009) Thesis title : Techno-Economic Analysis of Fuel Cell Based System for Residential Application in Malaysia. , (External Examiner)
  118. International Journal : Building Services Engineering Research & Technology, CIBSE, UK Title: A methodology for post-occupancy evaluation of ventilation (Ref: B793)
  119. International Journal : International Journal of Heat & Mass Transfer Title: Performance Analysis of a Membrane-based Energy Recovery Ventilator (Ref: C/T08-056)
  120. 2008/2009 KMEM4181/4282 Thesis Project
  121. International Journal : Building and Environment Title: Effects of Thermal Activated Building Systems in schools on thermal comfort in winter (BAE-D-08-00889R2)
  122. 2005/2006 KMEM4181/4282 Thesis Project
  123. 2006/2007 KMEM4181/4282 Thesis Project
  124. 1997/1998 KM4000 Graduation Project
  125. 2007/2008 KMEM4181/4282 Thesis Project
  126. A prototype Quick Cost Estimator System for Plastic Injection Molding Project A Work in Progress-.
  127. Design of A Shock Absorber for Lifting Equipments
Contribution to external organisation
  1. (2024) Pakar Perunding: Mesyuarat Bersama Pakar Perunding Bagi Kerja-Kerja Pemasangan Sistem Local Exhaust Ventilation (Lev) Di Makmal Anatomi Manusia, Jabatan Anatomi, Fakulti Perubatan, University, (Expert Advisor)
  2. (2023) Panel of Mqa for Mechanical Engineering, National, (Auditor)
  3. (2020) External Examiner for Bachelor of Engineering (Mechanical Engineering)(Honours) Programme, Curtin University Malaysia, Curtin University Malaysia, International
  4. (2020) eCommittees for DSM/NMC/ISC-F/WG0-4 "Cleaning equipment for air and other gases", SIRIM
  5. (2020) International Reviewer for Doctoral Degree of Tianjin University, Tianjin University
  6. (2020) Reviewer for Entity-level Sentiment Prediction in Danmaku-video Interaction (SUPE-D-20-01562), Journal of Supercomputing
  7. (2020) Engineering Doctorate Examiner: LEUNG Chak Man (84084760) SEEM, CITY UNIVERSITY OF HONG KONG
  8. (2019) Professional course (3) conducted at Tianjin University - The China-ASEAN Scholar Program, Tianjin University (TJU), China, International
  9. (2019) Professional course (2) conducted at Tianjin University - The China-ASEAN Scholar Program, Tianjin University (TJU), China, International
  10. (2019) Assessor - YUTP-FRG Grant Application 2020 (Application No. 78), Research Management Center UTP, National
  11. (2019) Professional course (4) conducted at Tianjin University - The China-ASEAN Scholar Program, Tianjin University (TJU), China, International
  12. (2019) Professional course (1) conducted at Tianjin University - The China-ASEAN Scholar Program, Tianjin University (TJU), China, International
  13. (2019) Reviewer - Lab Scale Experimental Study to Investigate the Effect of different Backfilling Materials on Thermal Performance of Ground Air Heat Exchanger System, Applied Thermal Engineering, International
  14. (2019) Visiting Scholar - China-ASEAN Scholar Program of Tianjin University (TJU), China, Tianjin University (TJU), China, International
  15. (2019) External Evaluator for Universiti Teknologi Petronas, Universiti Teknologi Petronas, National
  16. (2019) Reviewer - Parametric study of the particulate fouling characteristics of vortex generators in a heat exchanger Journal: Applied Thermal Engineering, Applied Thermal Engineering, International
  17. (2019) Assessor of the SAR reports of years 2016 and 2020, Faculty of Engineering, University of Malaya
  18. (2019) External Examiner for PhD Candidate (NASIRU ISHAQ IBRAHIM), Universiti Teknologi Malaysia
  19. (2018) External Examiner For Master of Electrical Engineering (Full Research) Candidate - Kuan Yee Nee (SE21938), College of Graduate Studies | UNITEN Putrajaya Campus, National
  20. (2018) Panel for Mock Audit, Programme of Bachelor of Biomedical Engineering (Prosthetics & Orthotics), Department of Biomedical Engineering, University of Malaya
  21. (2018) External Evaluator for Project No. 63 (YUTP Fundamental Research Grant (FRG) 2019), Universiti Teknologi PETRONAS
  22. (2018) Head of Delegation - UCSI UNIVERSITY Continuing Accreditation, Engineering Accreditation Council, Board of Engineers, Malaysia (BEM)
  23. (2018) Advisor for ASHRAE UM Branch, The American Society of Heating, Refrigerating and Air-Conditioning Engineers
  24. (2018) EAC panel for Continuing Accreditation for Bachelor of Engineering (Honours) in Mechatronic Engineering, UCSI UNIVERSITY , Board of Engineers, Malaysia (BEM)
  25. (2018) Head of Panel for the APPLICATION TO IMPROVE CURRICULUM PROGRAM STRUCTURE, Bachelor of Engineering (Honours) Mechatronic Engineering, UCSI University. , Engineering Accreditation Department, Board of Engineers, Malaysia (BEM)
  26. (2017) EAC Chief Panel for Programme of Bachelor of Mechanical Engineering(Automotive) with Honours, UTeM., Board of Engineers Malaysia (BEM)
  27. (2017) EAC Chief Panel for Programme of Bachelor of Manufacturing Engineering (Manufacturing Design) with Honours, UTeM, Board of Engineers Malaysia (BEM)
  28. (2017) MQA Assessor, Malaysian Qualifications Agency (MQA)
  29. (2016) Associate Editor (Indoor and Built Environment), Journal of Indoor and Built Environment
  30. (2016) MQA Panel for Master of Mechanical Engineering (Automotive) By Taught Course, Malaysian Qualifications Agency
  31. (2016) Reviewer for manuscript # IBE-16-0238.R1 entitled "A new method for measurement of air change rate based on indoor PM2.5 removal" for Indoor and Built Environment., Indoor and Built Environment
  32. (2016) Chief Panel/Chairman for EAC/BEM Evaluation on Bachelor of Manufacturing Engineering (Manufacturing Design) with Honours, Universiti Teknikal Malaysia Melaka (UTeM), Board of Engineers, Malaysia (BEM)
  33. (2016) Internal Panel for Master of Sport Science, Quality Management and Enhancement Centre (QMEC), University of Malaya
  34. (2015) Adjunct Professor in Mechanical Engineering, Inti International University, Nilai, Malaysia, International
  35. (2015) Associate Editor for Indoor and Built Environment, Indoor and Built Environment
  36. (2015) Evaluation Panel for MASTER OF SCIENCE IN MECHANICAL ENGINEERING Lincoln University College [LUC], Malaysian Qualifications Agency (MQA)
  37. (2015) Panel evaluation of the Level 5 Diploma in Electrical and Electronic Engineering oleh City & Guilds dan Level 5 Diploma in Mechanical Engineering of City & Guilds, UK., MALAYSIAN QUALIFICATIONS AGENCY (MQA)
  38. (2015) Speaker for EAC and Complex Engineering Workshop 2015, Department of Mechanical Engineering, University of Malaya
  39. (2015) Chief Panel for Engineering Accreditation Council (EAC), Board of Engineers, Malaysia - For Evaluation of Bachelor of Mechanical Engineering (Automotive) with Honours, Universiti Teknikal Malaysia Melaka (UTeM), 2015., Board of Engineers, Malaysia (BEM)
  40. (2014) Members of the CIB TG86 Building Healthy Cities, CIB TG86 Building Healthy Cities, International
  41. (2014) Adjunct Professor in Mechanical Engineering, INTI International University, International
  42. (2014) Tsinghua-TongFang's CNKI Expert Assessor , Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing), International
  43. (2014) Indoor Air 2014 Chairperson, Indoor Air 2014
  44. (2014) Indoor Air 2014 International Scientific Committee, Indoor Air 2014
  45. (2013) Green Building HVAC&R Systems Project, SolarLand SDN BHD, National
  46. (2013) Finite element analysis on longitudinal and radial functionally graded femoral prosthesis, UNITEN, Kajang, National
  47. (2013) Climate Change World Weather File Generator for World-Wide Weather Data CCWorldWeatherGen, Sustainable Energy Research Group, University of Southampton (UOS), International
  48. (2013) Field analysis of indoor air quality in high rise and low rise green offices with radiant slab cooling systems in Malaysia, Department of Mechanical Engineering, National Defense University of Malaysia, Kuala Lumpur, Malaysia, National
  49. (2013) Fully Fresh Air Air-conditioning System Equipped with Double Heat Pipe Based Heat Recovery Technology, Department of Marine Engineering, Chabahar Maritime University, 99717-56499, Chabahar, Iran, International
  50. (2013) Chief EAC Panel for Master in Engineering with Honours Mechanical Engineering, The University of Nottingham, Kampus Malaysia pada 16/4/2013 18/4/2013., EAC/BEM
  51. (2013) MQA Panel for "program BSc Motorsport Technology in collaboration with Staffordshire University, UK (MQA/PA 3910)", MQA, Malaysia.
  52. (2013) Indoor Air 2014 International Scientific Committee, Indoor Air 2014
  53. (2013) MQA Panel for PENILAI BAGI AKREDITASI PROGRAM SISWAZAH UKM, UKM, Bangi.
  54. (2013) Panel Penilai bagi Sarjana Keselamatan Maklumat, Universiti Malaya., Universiti Malaya
  55. (2013) EAC Chief Panel for Bachelor of Engineering (Honours) (Product Design Engineering), Universiti Malaysia Perlis (UniMAP) pada 1/10/2013 3/10/2013., EAC/BEM
  56. (2013) MQA Panel for "BSc Motorsport Technology in collaboration with Staffordshire University, UK (MQA/PA 3910)", MQA MALAYSIA
  57. (2012) Chief Panel for the Engineering Accreditation Council (EAC), Board of Engineers, Malaysia - For Evaluation of B.Eng. (Manufacturing Engineering) at UTeM, Melaka, Board of Engineers, Malaysia (BEM)
  58. (2012) Asian Steering Committee (ASC), The Healthy Buildings conference 2012 (HB2012)., The Healthy Buildings conference 2012 (HB2012)
  59. (2012) Associate Editor, editorial board of Indoor & Built Environment (IBE)., International Journal of Indoor & Built Environment (IBE).
  60. (2012) Panel for the Engineering Accreditation Council (EAC), Board of Engineers, Malaysia - For Evaluation of B.Eng. (Mechanical Engineering) at UNISEL, Selangor., Board of Engineers, Malaysia (BEM)
  61. (2012) Invited Speaker for National Conference & Workshop on Green Building "Incorporating Energy Efficiency in Building Design", Construction Research Institute of Malaysia
  62. (2011) Panel in the Mock EAC Audit exercise at UPNM, UPNM
  63. (2011) Chief Panel for Engineering Accreditation Council (EAC), Board of Engineers, Malaysia - For Evaluation of B.Eng. (Mechanical Engineering) at UNITEN, Bangi., Board of Engineers, Malaysia (BEM)
  64. (2010) JENESYS Program, Nagaoka University of Technology, International
  65. (2010) Chief Panel for Engineering Accreditation Council (EAC), Board of Engineers, Malaysia - For Evaluation of B.Eng. (Mechanical Engineering) at UMP, Pekan., Board of Engineers, Malaysia (BEM)
  66. (2010) Member of the Asian Steering Committee (ASC) for the 10th International Healthy Buildings Conference in 2012 (HB2012), which is the official conference of the International Society of Indoor Air Quality and Climate (ISIAQ) and will take place in Brisbane, Australia, from 8-12 July 2012., International Society of Indoor Air Quality and Climate (ISIAQ)
  67. (2010) Panel for Engineering Accreditation Council (EAC), Board of Engineers, Malaysia, Board of Engineers, Malaysia (BEM)
  68. (2010) Visiting Professor for National Chen-Yi University of Technology and National Cheng Kung University, Taiwan, Republic of China., National Chen-Yi University of Technology, Taiwan, China.
  69. (2009) ASHRAE IAQ 2010 MALAYSIAN CHAPTER ORGANIZING COMMITTEE, American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc 1791 Tullie Cir. Atlanta, GA 30329
  70. (2009) International Scientific Committee for the ASHRAE IAQ2010 conference, Airborne Infection Control - Ventilation, IAQ & Energy, ASHRAE IAQ2010 Steering Committee
  71. (2008) The UK Prime Minister Initiative Program, British Council - University of Southampton, Great Britain, International
  72. (2008) SIRIM Panel of Expert for KUMPULAN KERJA BAGI STATIONARY SOURCE EMISSIONS, SIRIM Malaysia
  73. (2007) 2nd Professional Interviewer for Professional Engineer Exam , The Institution of Engineers, Malaysia (IEM)
  74. (2000) IEM/BEM Part-One Exam Examiner for 502, 505, 506 and 300A subjects, IEM/BEM

SUPERVISION


Postgraduate Student
PhD/ Doctoral
  1. (2024) THE EFFECTS OF DIFFUSER DISCHARGE ANGLE FOR A HEAT RECOVERY VENTILATOR FOR THERMAL COMFORT AND ENERGY SAVINGS IN A LARGE BUILDING, MOHD AZHARI MOHD RODZI
  2. (2024) A Comprehensive Method for Modelling Residents' Window-Opening Behaviour to Enhance Building Simulation Performance, YIQIAO LIU
  3. (2024) mechanics and metal work, DENGSHUO LAI
  4. (2024) Research on Distribution Law and Prediction Model of Fine Particulate Matter Concentration in Beijing Metro Stations, FEI PEI
  5. (2024) Modelling and Analysis of the PM2.5 Concentration at the Subway Stations in China, CHANG LI
  6. (2024) SIMULATION AND OPTIMIZATION OF HEAT EXCHANGERS IN REFRIGERATION SYSTEMS USING MATLAB/FLUENT ITERATIVE INTERACTION, JIANG LINA
  7. (2024) GREEN ROOF SYSTEMS IN HIGH-DENSITY CITIES: ADAPTATION STRATEGIES WITH A FOCUS ON BEIJING, ZHANG, XINYU
  8. (2024) MECHANISM INVESTIGATIONS OF THERMOSETTING POWDER COATINGS CURED BY CATALYTIC INFRARED RADIATION, YUAN YINDONG
  9. (2024) Investigation on the Mixing Characteristics of Water-Air Bubbles Flow along a Horizontal Tube from Venturi-Nozzle, GOO WEI HONG
  10. (2024) NUMERICAL INVESTIGATION OF THERMAL COMFORT AND VENTILATION PERFORMANCES OF STRATUM VENTILATION(SV) FOR LARGE BUILDINGS IN THE TROPICS, TOH HUI SIN
  11. (2024) The Heat Sink Potential Potential of Embedded Waste Tyres to Improve Concrete Pavement Thermal Performance, ANIZA BINTI ABDUL AZIZ
  12. (2024) The Heat Sink Potential Potential of Embedded Waste Tyres to Improve Concrete Pavement Thermal Performance, ANIZA BINTI ABDUL AZIZ
  13. (2023) Performance Evaluation and Prediction Analysis of a Novel Catalytic Combustion Heating Technology in an Open Cold Emergency Environment, QIN MINGYUAN
  14. (2023) Impact of BIN Weather Data and Climate Change on Air Conditioning in the Tropics, WONG CHUN MUN
  15. (2022) CFD STUDIES ON STRATUM VENTILATION INSTALLED WITH A VRF/VRV SYSTEM FOR LARGE BUILDINGS IN THE TROPICS, UMAIR AHMED
  16. (2022) FORMULATION OF FINAL RESISTANCE OF THE AIR FILTERS, YIT JING EE
  17. (2020) The Study on Occupant Density in different areas of Large-medium Supermarkets in Beijing China: Experiment and Prediction Model, Li Chang
  18. (2020) NUMERICAL INVESTIGATION OF THERMAL COMFORT AND VENTILATION PERFORMANCES OF STRATUM VENTILATION(SV) FOR LARGE BUILDINGS IN THE TROPICS, TOH HUI SIN
  19. (2020) INVESTIGATION OF AIRFLOW AND PRESSURE DROP WITH DIFFERENT TYPES OF FILTERS IN HVAC SYSTEM, YIT JING EE
  20. (2020) CFD STUDIES ON STRATUM VENTILATION (SV) INSTALLED WITH A VRF/VRV SYSTEM FOR LARGE BUILDINGS IN THE TROPICS, UMAIR AHMED
  21. (2020) ANALYSIS OF HVAC ENERGY RECOVERY SYSTEMS IN MALAYSIA WITH BIN METHOD, WONG CHUN MUN
  22. (2019) NUMERICAL INVESTIGATION OF THERMAL COMFORT AND VENTILATION PERFORMANCES OF STRATUM VENTILATION(SV) FOR LARGE BUILDINGS IN THE TROPICS, TOH HUI SIN
  23. (2019) INVESTIGATION OF AIRFLOW AND PRESSURE DROP WITH DIFFERENT TYPES OF FILTERS IN HVAC SYSTEM, YIT JING EE
  24. (2019) CFD STUDIES ON STRATUM VENTILATION (SV) INSTALLED WITH A VRF/VRV SYSTEM FOR LARGE BUILDINGS IN THE TROPICS, UMAIR AHMED
  25. (2018) ENGINEERING ECONOMIC ANALYSES OF FUEL CELL BASED SYSTEMS FOR RESIDENTIAL AND COMMERCIAL (R&C) APPLICATIONS IN MALAYSIA, ARVINDT A/L MARIAPAN
  26. (2017) THE POTENTIAL OF WASTE TYRES IN AMELIORATING THE EFFECTS OF EXPOSED CONCRETE PAVING ON URBAN HEAT IN MALAYSIA, ANIZA BINTI ABDUL AZIZ
  27. (2017) RISK OF ENVIRONMENTAL CHANGES IN HISTORICAL BUILDING, RAHA BINTI SULAIMAN
  28. (2017) INDOOR ENVIRONMENTAL QUALITY STRATEGIES IN AIR CONDITIONED MUSEUM GALLERIES: A HOLISTIC FRAMEWORK FOR VISITOR SATISFACTION AND ARTEFACT PROTECTION, RAHA BINTI SULAIMAN
  29. (2017) ANALYSIS OF HVAC ENERGY RECOVERY SYSTEMS IN MALAYSIA WITH BIN METHOD, WONG CHUN MUN
  30. (2017) INDOOR ENVIRONMENTAL QUALITY STRATEGIES IN AIR CONDITIONED MUSEUM GALLERIES: A HOLISTIC FRAMEWORK FOR VISITOR SATISFACTION AND ARTEFACT PROTECTION, RAHA BINTI SULAIMAN
  31. (2016) Heat Transfer Analysis of Evaporative Cooled Condenser with Mini Tubing, Wong Chun Mun
  32. (2013) UTILIZATION OF FUNCTIONALLY GRADED MATERIALS IN FEMORAL PROSTHESIS, AZIM ATAOLLAHI OSHKOUR
  33. (2012) THERMAL AND ENERGY PERFORMANCE OF NANOFLUID OPERATED HEAT RECOVERY EXCHANGER, LEONG KIN YUEN
  34. (2011) ADAPTIVE THERMAL COMFORT MODEL STUDY FOR PUBLIC BUILDINGS IN URBAN AREA, CHEW BEE TENG
  35. (2010) UTILIZATION OF FUNCTIONALLY GRADED MATERIALS IN FEMORAL PROSTHESIS, AZIM ATAOLLAHI OSHKOUR
  36. (2010) The adaptive model study in buildings in the tropics, Chew Bee Teng
  37. (2010) Energy Efficiency Study Project, Leong Kin Yuen
  38. (2010) THE APPLICATION OF THE HORIZONTAL HEAT PIPE HEAT EXCHANGER FOR SAVING ENERGY AND IMPROVE THE COMFORT LEVEL IN AN AIR-CONDITION SPACE IN THE TROPICS, MOHAMMAD AHMADZADEHTALATAPEH
  39. (2008) Experimental and Simulation Studies of Horizontal HPHXs For Buildings in the Tropics, Mohammad Ahmadzadehtalatapeh
Master
  1. (2021) NUMERICAL CLOSED-FORM SOLUTIONS OF SKIN FLAP SURGERIES USING 3D FACE MODELS, NUR NADIRAH BINTI KHAIRU NAJHAN
  2. (2019) Development of a server-based smartphone simulator application for flaps in dermatologic surgery, NUR NADIRAH BINTI KHAIRU NAJHAN
  3. (2018) ENERGY PERFORMANCE COMPARISON BETWEEN THE VARIABLE REFRIGERANT FLOW (VRF) AND CONVENTIONAL AIR - CONDITIONING SYSTEMS FOR TROPICAL BUILDINGS, MUHAMMAD 'AMIR BIN ROSLAN
  4. (2017) A COMPARISON STUDY FOR ACTIVE CHILLED BEAM AND VARIABLE AIR VOLUME SYSTEMS FOR AN OFFICE BUILDING, TAM JUN HAO
  5. (2016) ENERGY PERFORMANCES STUDY OF THE VARIABLE REFRIGERANT FLOW (VRF) AND CONVENTIONAL AIR CONDITIONING AND MECHANICAL VENTILATION (ACMV) SYSTEMS FOR A LARGE BUILDING IN THE TROPICS, MUHAMMAD 'AMIR BIN ROSLAN
  6. (2015) A COMPREHENSIVE PERFORMANCE INVESTIGATION OF AN UNDER-FLOOR AIR DISTRIBUTION SYSTEM IN THE TROPICS, POH KAI SIN
  7. (2014) The Fieldwork and Control Engineering on Energy Efficiency and Indoor Environmental Quality in Green and Non-green Office Buildings in the Tropics, TOMMY CHANG CHEE PANG
  8. (2014) IN-SITU FIELD STUDY ON BUILDING INTERGRATED PROTOVOLTAIC APPLICATIONS IN MALAYSIA, LIM KEK SIA
  9. (2014) Air Flow Buoyancy Surrounding Buildings in Malaysia, LIAN YEE CHENG
  10. (2014) FINITE ELEMENT ANALYSIS OF CONSECUTIVE IMPACTS ON ELECTRONIC DEVICES AND CORRELATION TO ROBUSTNESS, HUA SHIJIE, NORMAN
  11. (2012) THE THERMAL PERFORMANCE STUDY OF BIOMASS FIELD-ERECTED WATER TUBE BOILERS USING CFD MODELLING, Sivabalan A/L Tanapala
  12. (2012) Comparison of Thermal comfort in Green building and conventional building in tropical climates, Vinod Khanna Nair A/L Kuncheekanna
  13. (2012) INDOOR AIR QUALITY AND CLIMATE CHANGE IMPACTS ON AIR CONDITIONING AND MECHANICAL VENTILATION  SYSTEM  IN COMMERCIAL BUILDINGS IN THE TROPICS, SYAFAWATI HASBI
  14. (2012) CLIMATE CHANGE IMPACTS ON THE PERFORMANCE OF SPLIT TYPE AIR-CONDITIONING SYSTEM IN MALAYSIA, PEAN HOCK LEONG
  15. (2011) FEASIBILITY STUDY ON IMPLEMENTATION OF MEDIUM TEMPERATURE SOLAR THERMAL ENERGY IN INDUSTRIAL PROCESSES - A CASE STUDY IN MALAYSIA, Chin Chuan Kong
  16. (2011) Energy Analysis of Green Office Buildings in the Tropics, Ir. Lim Kek Sia
  17. (2011) A comprehensive performance investigation of an under-floor air distribution (UFAD) system in the tropics, POH KAI SIN
  18. (2011) CASE STUDY ON IMPROVEMENT OF INDOOR AIR QUALITY FOR HEALTH CARE FACILITIES IN MALAYSIA, PHUAH KOK SUN
  19. (2011) THE DESIGN AND TESTING OF A POWER AUGMENTED WIND TURBINE SYSTEM FOR URBAN HIGH RISE APPLICATION, PAN KOK CHEN
  20. (2011) THE HOSPITAL OPERATING ROOM AIR DISTRIBUTION CASE STUDY IN MALAYSIA, DING LAI CHET
  21. (2010) THE VENTILATION STUDY OF MULTIPLE BED HOSPITAL WARDS IN MALAYSIA, DANARAJ CHANDRASEGARAN
  22. (2010) Thermal Buoyancy Study on Different Buildings, Lian Yee Cheng (881105055239)
  23. (2010) The Control Engineering Study to Improve the Energy Efficiency and Thermal Comfort in Green Buildings in Malaysia, Tommy Chang Chee Pang
  24. (2010) Propeller Fan Design for Improved Air Flow and Noise Performances, Teng Yih Jeng
  25. (2010) PREDICTION OF MECHANICAL FAILURE ON PORTABLE CONSUMER ELECTRONIC PRODUCTS SUBJECTED TO MULTIPLE DROP IMPACT DYNAMICS, Hua Shi Jie
  26. (2010) NUMERICAL HEAT TRANSFER STUDY FOR LARGE RUBBER PRODUCT, Wong Hon Fei
  27. (2010) Impact of climate change on commercial wall mounted air conditioner performance and reliability in tropics, Pean Hock Leong
  28. (2010) Experimental and Theoretical Investigation of Hospital Operating Room (OR) Air Distribution in the Tropics, Ding Lai Chet
  29. (2010) Design, Analysis and Fabrication of a CD Microfluidic Platform, Ali Akbar Nozari
  30. (2010) Climate Change Implications for Large Hospital Buildings and Their Technical Services in the Tropics, Syafawati Hasbi
  31. (2010) Adiabatic and Non-adiabatic Capillary Tube Flow Study, Poh Hong Hong
  32. (2010) DESIGN, FABRICATION AND ANALYSIS OF A NOVEL MICRO FLUIDIC FLOW PROCESSING CD PLATFORM, ALI AKBAR NOZARI
  33. (2010) NUMERICAL HEAT TRANSFER STUDY FOR LARGE RUBBER PRODUCT, WONG HON FEI
  34. (2010) A STUDY OF THE EFFECT OF SERRATION AT THE TRAILING EDGE OF THE PROPELLER FAN BLADE TO USING COMPUTATIONAL FLUID DYNAMIC APPROACH, TENG YIH JENG
  35. (2010) VENTILATION STUDY IN MULTIPLE BED HOSPITAL WARDS IN MALAYSIA, DANARAJ A/L CHANDRASEGARAN
  36. (2010) PARAMETRIC STUDY OF FLOW BEHAVIOUR AND HEAT EXCHANGE CHARACTERISTICS OF A NON-ADIABATIC CAPILLARY TUBE, POH HONG HONG
  37. (2009) CASE STUDY ON IMPROVEMENT OF INDOOR AIR QUALITY FOR HEALTH CARE FACILITIES IN MALAYSIA, PHUAH KOK SUN
  38. (2008) THE EFFECT OF ABUTMENT ANGULATION ON STRESSES IN BONE: A 3-DIMENSIONAL FINITE ELEMENT STUDY, MURAJA A. UTMAN
  39. (2008) Conceptual Design of Wind-Solar Hybrid Renewable Energy Generation system Power-Augmentation-Guide-Vane and Incorporated Rain Water Collection Feature, Pan Kok Chen
  40. (2008) THE EFFECT OF ABUTMENT ANGULATION ON STRESSES IN BONE: A 3-DIMENSIONAL FINITE ELEMENT STUDY, MURAJA A. UTMAN
  41. (2008) CFD SIMULATION OF THERMAL COMFORT IN AN OPERATING THEATRE AT UNIVERSITY OF MALAYA MEDICAL CENTRE, MOHD HARDIE HIDAYAT BIN MOHYI
  42. (2008) PARAMETRIC STUDY ON THE HEAT TRANSFER CHARACTERISTICS OF RADIALLY-DISPLACED ROTATING HEAT PIPE AND ITS POTENTIAL IN HVAC&R APPLICATION, FOO YEW CHOON
  43. (2007) THE ENERGY AND ECONOMIC STUDIES OF AN ICE SLURRY SYSTEM IN A TROPICAL BUILDING, Lee Swee Kei
  44. (2007) PARAMETRIC STUDY ON THE HEAT TRANSFER CHARACTERISTICS OF RADIALLY-DISPLACED ROTATING HEAT PIPE AND ITS POTENTIAL IN HVAC&R APPLICATION, FOO YEW CHOON
  45. (2007) CFD Simulation and Analysis of Thermal Comfort Level in an Operating Theatre, Mohd Hardie Hidayat Bin Mohyi
  46. (2007) THE ENERGY AND ECONOMIC STUDIES OF AN ICE SLURRY SYSTEM IN A TROPICAL BUILDING, LEE SWEE KEI
Under Graduate Students
  1. (2024) Industrial Training, TAN WEI KANG, HEW KAR WENG
  2. (2017) THE PERFORMANCE STUDY OF CROSS-FLOW HEAT EXCHANGER FOR FRESH AIR VENTILATION OF WALL-MOUNTED AIR-CONDITIONER UNIT
  3. (2014) KMEM4181/4282 Thesis Project
  4. (2013) KMEM4181/4282 Thesis Project
  5. (2011) KMEM4181/4282 Thesis Project
  6. (2010) KMEM4181/4282 Thesis Project
  7. (2008) KMEM4181/4282 Thesis Project
  8. (2007) KMEM4181/4282 Thesis Project
  9. (2006) KMEM4181/4282 Thesis Project
  10. (2005) KMEM4181/4282 Thesis Project
  11. (2004) KMEM4181/4282 Thesis Project
  12. (2000) KMEM3180 Thesis Project
  13. (1999) KMEM3180/KM4000 Thesis Project
  14. (1998) KMEM3180/KM4000 Thesis Project
  15. (1997) KM4000 Thesis Project

TEACHING


Master
  1. (2017) KXGM6303 - Air Conditioning and Refrigeration
  2. (2011) KXGM6102 - Applied Heat Transfer
  3. (2010) KXGM6102 - Applied Heat Transfer
  4. (2010) KXGM6303 - Air Conditioning and Refrigeration
  5. (2009) KXGM6102 - Applied Heat Transfer
  6. (2009) KXGM6303 - Air Conditioning & Refrigeration
  7. (2008) KXGM6102 - Applied Heat Transfer
  8. (2007) KXGM6102 - Applied Heat Transfer
  9. (2007) KXGM6303 - Air Conditioning & Refrigeration
  10. (2006) KXGM6102 - Applied Heat Transfer
  11. (2006) KXGM6303 - Air Conditioning & Refrigeration
  12. (2005) KXGM6101 - Applied Thermodynamics and Heat Transfer
Bachelor
  1. (2024) KIG4063 - Heating, Ventilation, Air Conditioning and Refrigeration
  2. (2024) KIX2003 - Law and Ethics in Engineering
  3. (2023) KIG2014 - Fluid Mechanics 2
  4. (2023) KIG4043 - Heating, Ventilation, Air Conditioning and Refrigeration (Hvac&R)
  5. (2023) KIX2003 - Law and Ethics in Engineering
  6. (2022) KIG1005 - Engineering Thermodynamics
  7. (2022) KIG2003 - Fluid Mechanics Ii
  8. (2022) KIG4043 - Heating, Ventilation, Air Conditioning and Refrigeration (Hvac&R)
  9. (2022) KIX2003 - Law and Ethics in Engineering
  10. (2019) KIX 2001 - Integrated Design Project
  11. (2018) KIX 2003 - Law and Ethics in Engineering
  12. (2018) KXEX2165 - Moral and Ethics of Engineering Profession
  13. (2016) KMEM4322 - Air Conditioning
  14. (2016) KXEX2165 - Moral and Ethics of Engineering Profession
  15. (2015) KMEM1109 - Thermodynamics
  16. (2015) KMEM4322 - Air Conditioning
  17. (2014) KMEM4322 - Air Conditioning
  18. (2013) KMEM4322 - Air Conditioning
  19. (2013) KMEM4322 - Air Conditioning
  20. (2011) KMEM4322 - Air Conditioning
  21. (2010) KMEM4322 - Air Conditioning
  22. (2009) KMEM1109 - Thermodynamics
  23. (2009) KMEM4322 - Air Conditioning
  24. (2008) KMEM1104 - Engineering Drawing & Computer Aided Design
  25. (2007) KMEM1104 - Engineering Drawing & Computer Aided Design
  26. (2007) KMEM1109 - Thermodynamics
  27. (2007) KMEM4322 - Air Conditioning
  28. (2006) KMEM1104 - Engineering Drawing & Computer Aided Design
  29. (2006) KMEM2217 - Mechanics of Materials Ii
  30. (2006) KMEM4322 - Air Conditioning
  31. (2005) KMEM1104 - Engineering Drawing & Computer Aided Design
  32. (2005) KMEM3217 - Mechanics of Materials Ii
  33. (2005) KMEM4322 - Air Conditioning
  34. (2004) KMEM1104 - Engineering Drawing & Computer Aided Design
  35. (2004) KMEM3217 - Mechanics of Materials Ii
  36. (2000) KMEM1104 - Engineering Drawing & Computer Aided Design
  37. (2000) KMEM3322 - Air Conditioning
  38. (2000) KXEX1110 - Fundamental Materials Science
  39. (1999) KMEE2169 - Thermodynamics and Fluid Mechanics
  40. (1999) KMEM1144 - Mechanics of Materials I
  41. (1999) KMEM1155 - Engineering Drawing
  42. (1999) KMEM3322 - Air Conditioning
  43. (1998) KBEB1118 - Solid Mechanics
  44. (1998) KMEM1144 - Mechanics of Materials I
  45. (1998) KMEM1155 - Engineering Drawing
  46. (1998) KMEM3308 - Principles of Refrigeration
  47. (1998) KMEM3322 - Air Conditioning
  48. (1998) KMEP2111 - Mechanical Engineering Iv
  49. (1997) KMEM2123 - Heat Transfer I
  50. (1997) KMEM2173 - Heat Transfer Lab
  51. (1997) KMEM3005 - Engineering Mathematic III
  52. (1997) KMEP2242 - Materials Technology I

COMMERCIALIZATION


  • The proposed independent evaluation and consultation to prove that thermal jacket works as heating as well as cooling jacket by using thermoelectric device (PELTIER) [Invoice No. : 2021/iNESS/INV 004], (Service)

SOCIAL RESPONSIBILITY ACTIVITIES


  • Reviewer for Experimental Investigation On Cross Flow Fan’S Casing Parameters Inside of a Split Air Conditioner Indoor Unit by Stereo Particle Image Velocimetry, (29 Nov 2016 - 16 Dec 2016)
  • Reviewer for Impacts of Shading Effect from Nearby Buildings On Heating and Cooling Energy Consumption in Hot Summer and Cold Winter Zone of China, (14 Nov 2016 - 28 Nov 2016)
  • Reviewer for Experimental Study of Heat Pipe Heat Exchanger in Air Conditioning Applications, (12 Nov 2016 - 21 Nov 2016)
  • Reviewer for Impacts of Shading Effect from Nearby Buildings On Heating and Cooling Energy Consumption in Hot Summer and Cold Winter Zone of China, (23 Aug 2016 - 31 Aug 2016)
  • Reviewer for 3d Temperature Field Modeling of An Office Space and Occupant Comfort Analysis Based On Measured Data, (12 Aug 2016 - 24 Aug 2016)
  • Adjudicator for Sensor-Based Monitoring of Heating System Effectiveness and Efficiency in Spanish Churches, (14 Jul 2016 - 19 Jul 2016)
  • Reviewer for a Study On The Thermal Properties of The Traditional Ondol Depending On The Flue Structures, Focusing On Jul Gorae and Doedon Gorae Types, (02 Jun 2016 - 24 Jul 2016)
  • Reviewer for Performance Comparison of Different Pvt Water Collector Designs Using Finite Element Method, (17 May 2016 - 23 Jun 2016)
  • Reviewer for Determination of The Optimum Operation Conditions About a Heat Pipe Heat Exchanger Used for Waste Heat Recovery, (13 Apr 2016 - 11 Nov 2016)
  • Reviewer for Residential Block Configurations and Passive Solar Strategies: Analyzing The Impacts of Design Parameters On Outdoor and Indoor Solar Access, (04 Apr 2016 - 27 May 2016)
  • Reviewer for Definition of Residential District Energy Simulation Typologies Based On Cluster Analysis of Geographical Data, (21 Mar 2016 - 30 Mar 2016)
  • Expert Invited for Fifth Asia Oceania Konwakai Di Da Nang, Vietnam, (10 Mar 2016 - 12 Mar 2016)
  • Member for Stationary Source Emissions (Wg/Z/8-4) - Sirim Sts Sdn Bhd, (24 Feb 2016 - 01 Jul 2016)
  • Reviewer for Rotary Type Liquid Desiccant Dehumidifier - a Feasibility and Parametric Analysis Energy and Buildings, (17 Feb 2016 - 27 Feb 2016)
  • Head of Delegation - Sponsored Technical Visit to Qingdao Hisense- Hitachi Air-Conditioning System Co., Ltd At Qingdao, Shandong, China., (21 Dec 2014 - 24 Dec 2014)
  • Peng Mentor for Iem Log Book Training Scheme - Dr. Chong Perk Lin, (01 Jan 2014 - 31 Dec 2016)
  • Peng Mentor for Iem Log Book Training Scheme - Engr. Dr. Chuah Keng Hoo, (01 Jan 2014 - 31 Dec 2016)
  • Examiner for Professional Engineer Exam for The Board of Engineers, Malaysia (Bem)., (01 Jan 2013 - 31 Dec 2013)
  • Speaker for "Seminar Kesedaran Inisiatif Cidb Dalam Pembinaan Lestari (Teknologi Hijau)" Conducted by Cidb Johor., (28 Jun 2012 - 28 Jun 2012)
  • Speaker for Guide to Green Building Design in Malaysia, (07 Jun 2012 - 07 Jun 2012)
  • Greenergy Seminar 2012 - a Path Towards Sustainable World, (10 Mar 2012 - 10 Mar 2012)
  • Advisor for Ashrae Student Branch, University of Malaya, (01 Jan 2012 - 31 Dec 2012)
  • Professional Engineer Examiner for Professional Assessment Examination (Pae) Conducted by Bem/Iem., (01 Jul 2011 - 31 Dec 2013)
  • Advisor, Student Branch, American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc. (Ashrae), Usa, (01 Jul 2011 - 31 Dec 2016)
  • Eac/Bem Panel for Beng Programmes, Board of Engineers, Malaysia., (01 Jul 2011 - 31 Dec 2016)
  • Speaker for Membership Drive Ashrae UM Student Branch, (01 Jul 2011 - 30 Jun 2012)
  • Professional Engineer's Mentor of Institution of Engineers, Malaysia (Iem), (01 Jul 2011 - 31 Dec 2013)
  • Member for Working Group-Kumpulan Kerja Bagi Stationary Source, (01 May 2011 - 31 Dec 2014)
  • Chairman, Working Group On Cleaning Equipment for Air and Other Gases (Wg/F/0-4), Sirim., (01 May 2011 - 30 Apr 2012)
  • Referee for Malaysian Robotic Olympiad 2005 (Mro 2005), (01 Nov 2005)
  • Member, Uc Alumni Association, (01 Jan 2005 - 31 Dec 2017)

COURSE ATTENDED


Internal / External Course
CONFERENCE
  1. THE 10TH ASEAN/OCEANIA KONWAKAI, Daikin Ales Aoya At Tottori (06 Mar 2023 - 10 Mar 2023)
  2. 17TH ASIA PACIFIC CONFERENCE ON BUILT ENVIRONMENT 2023 (APCBE 2023): UNIQUE CHALLENGES & SOLUTIONS FOR CLIMATE CHANGE IN THE HVAC&R INDUSTRY, Connexion Conference & Event Centre ? (Ccec), Kuala Lumpur, Malaysia (03 Nov 2023 - 04 Nov 2023)
External Course
NATIONAL
  1. BEM Webinar 2023: PREVIEW OF EAC STANDARD 2024: OVERVIEW AND HIGHLIGHTS OF KEY CHANGES, Via Zoom & Fb Live (01 Nov 2023 - 01 Nov 2023)
  2. IAQ Refining The Air Standard Seminar, Putrajaya Ballroom 2, Marriott Hotel (03 Aug 2023 - 03 Aug 2023)
  3. BEM Webinar 2023: PREVIEW OF EAC STANDARD 2024: OVERVIEW AND HIGHLIGHTS OF KEY CHANGES, Zoom and Fb Live (01 Nov 2023 - 01 Nov 2023)
  4. BEM Webinar 2023: PREVIEW OF EAC STANDARD 2024: OVERVIEW AND HIGHLIGHTS OF KEY CHANGES, Zoom and Fb Live (01 Nov 2023 - 01 Nov 2023)
  5. BEM Webinar 2023: PREVIEW OF EAC STANDARD 2024: OVERVIEW AND HIGHLIGHTS OF KEY CHANGES, Zoom and Fb Live (01 Nov 2023 - 01 Nov 2023)
  6. PREVIEW OF EAC STANDARD 2024: OVERVIEW AND HIGHLIGHTS OF KEY CHANGES, Zoom and Fb Live (01 Nov 2023 - 01 Nov 2023)
  7. PREVIEW OF EAC STANDARD 2024: OVERVIEW AND HIGHLIGHTS OF KEY CHANGES, Zoom and Fb Live (01 Nov 2023 - 01 Nov 2023)