Curriculum Vitae

DR. TUAN ZAHARINIE BINTI TUAN ZAHARI

Senior Lecturer
  • Department of Mechanical Engineering
    Faculty of Engineering
  • tzaharinie

BIOGRAPHY

Dr. Tuan Zaharinie Binti Tuan Zahari is a Senior Lecturer in Mechanical Engineering at the Faculty of Engineering, Universiti Malaya (UM). She holds a Bachelor of Engineering (2006) and a Master of Engineering Science (2009) in Materials Engineering, as well as a PhD (2014) in Advanced Manufacturing Technology: Brazing, all from the same university. She specializes in metal and alloys heat treatment and joining technology, particularly brazing process for similar or dissimilar materials and porous metal joining. She also explores the research areas of heat transfer, energy, and material recycling. She has published more than 25 technical papers and a book chapter in this fields which are mostly International Scientific Indexing (ISI)-indexed journal papers. She is also an active researcher who has received and been the principal investigator for various research grants, including University of Malaya Research Grant (UMRG), Impact-Oriented Interdisciplinary Research Grant Programme (IIRG), two times Fundamental Research Grant Scheme (FRGS) from Ministry of Higher Education Malaysia (MOHE), etc. She teaches several courses for Mechanical Engineering undergraduates, such as Manufacturing Technology, Machine Tool Engineering, Advanced Manufacturing Processes, Energy and Environment, etc.

AREAS OF EXPERTISE

  • ALLOY MATERIALS
  • METALS AND METAL ALLOY MATERIALS
  • JOINING TECHNOLOGY
    Brazing (ceramic/metal to metal, porous metal) / soldering / welding

ACADEMIC QUALIFICATION

  • SARJANA MUDA KEJURUTERAAN (BAHAN), (Material Engineering)
    Universiti Malaya (UM)
  • SARJANA SAINS KEJURUTERAAN, (Material Engineering)
    Universiti Malaya (UM)
  • Doctoral Degree (PhD)
    Universiti Malaya (UM)

ADMINISTRATIVE DUTIES

  • Coordinator
    25 Oct 2022 - 31 Dec 2023 (Department)
  • AJK Spesifikasi: Hot Tapping Pilot
    26 Jan 2023 - 26 Dec 2023 (University Malaya)
  • Accompanying Lecturer for Short Term Mobility Program to PSU, Pattani, Thailand
    24 Nov 2023 - 28 Nov 2023 (Dean Office, Faculty of Engineering)
  • Task Force Member
    10 Mar 2022 - 31 Dec 2022 (National)
  • Task Force Member
    18 Oct 2022 - 18 Oct 2022 (Department of Mechanical Engineering, Faculty of Engineering)
  • Task Force Member
    11 Oct 2022 - 11 Oct 2022 (Department of Mechanical Engineering, Faculty of Engineering)
  • Task Force Leader
    30 Aug 2022 - 30 Aug 2022 (Department of Mechanical Engineering, Faculty of Engineering)
  • Taskforce Alumni FKUM
    01 Jul 2019 - 30 Jun 2022 (Faculty)
  • ISO Working Group Committee Members, IMM
    13 Jul 2020 - 31 Mar 2022 (National)
  • EAC Committee (Course file, CQI)
    01 Aug 2020 - 31 Dec 2021 (Department of Mechanical Engineering, Faculty of Engineering)
  • Academic Advisor
    01 Jan 2020 - 22 Jan 2021 (Department of Mechanical Engineering, Faculty of Engineering)
  • Member of CRI 4.0
    27 Oct 2018 - 31 Dec 2020 (University Malaya)
  • Erasmus Programme Coordinator
    01 Jan 2020 - 31 Dec 2020 (Faculty)
  • ISO Working Group Committee Members, IMM
    04 Dec 2018 - 03 Dec 2020 (National)
  • Penyelia Latihan Industri
    12 Aug 2020 - 09 Oct 2020 (Department of Mechanical Engineering, Faculty of Engineering)
  • Academic Advisor
    03 May 2019 - 31 Dec 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • SAR Committee Members, JKM
    27 Jun 2018 - 31 Dec 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • Head Coordinator of the project implementation under the Erasmus Programme
    01 Jan 2016 - 31 Dec 2019 (Dean Office, Faculty of Engineering)
  • Auditor (Audit Kendiri FKUM)
    12 Nov 2019 - 14 Nov 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • Industrial Training Supervisor 2018/2019
    01 Aug 2019 - 06 Sep 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • Wakil Pengganti Jawatankuasa Ijazah Tinggi bagi JKM
    01 Apr 2018 - 01 Apr 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • CQI Committee Member at the Departmental Level
    05 Apr 2017 - 31 Dec 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Pelapor Seminar Pendidikan Finland
    17 Oct 2018 - 17 Oct 2018 (National)
  • Penyelia Latihan Industri (LI)
    12 Jun 2018 - 30 Aug 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Perlantikan sebagai Pensyarah Kursus Fakulti
    01 Feb 2018 - 31 Jul 2018 (Faculty)
  • AJK Pelaksana Makmal
    01 Feb 2018 - 31 Jul 2018 (Faculty)
  • Sekretariat AMDC 2017
    28 Jul 2017 - 14 May 2018 (National)
  • Perlantikan sebagai Pensyarah Kursus Fakulti
    04 Sep 2017 - 28 Feb 2018 (Dean Office, Faculty of Engineering)
  • AJK Pelaksana Makmal
    01 Sep 2017 - 30 Jan 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Academic Advisor
    01 Nov 2016 - 31 Dec 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Pelapor Malaysian Higher Education Forum (MyHEF)
    23 Nov 2017 - 24 Nov 2017 (National)
  • Member of the Organizing Committee of International Conference on the Science and Engineering of Materials (ICoSEM 2017)
    16 Nov 2016 - 16 Nov 2017 (International)
  • AJK Pelaksana Bagi Kursus GXEX1417/GIG1005 (Jalinan Masyarakat)
    05 Sep 2016 - 05 Sep 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • AJK Pelaksana Makmal, Jabatan Kejuruteraan Mekanik
    12 Sep 2016 - 30 Aug 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Pelapor seminar IR 4.0 anjuran KPT
    24 Aug 2017 - 25 Aug 2017 (National)
  • Penyelaras di Jabatan bagi kursus GIG 1005 (GXEX 1417) - Jalinan Masyarakat
    01 Jan 2016 - 31 Dec 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Member of the Organizing Committee of International Conference on Advances in Materials and Processing Technologies (AMPT 2016)
    08 Nov 2016 - 11 Dec 2016 (International)
  • Peserta
    10 Nov 2016 - 11 Nov 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Academic Advisor
    01 Sep 2015 - 30 Aug 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee member of '2nd International Conference on the Science & Engineering of Materials (ICoSEM 2015)'
    16 Nov 2015 - 18 Nov 2015 (International)
  • Ahli Jawatankuasa Projek Ilmiah Tahap Akhir (Tesis)
    23 Dec 2014 - 30 Aug 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Ahli Jawatankuasa Pelajar Pemerhatian
    23 Dec 2014 - 29 Aug 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Ahli Jawatankuasa "Postgraduate Day"
    27 May 2015 - 27 May 2015 (Department of Mechanical Engineering, Faculty of Engineering)

MEMBERSHIPS

  • COMMITTEE MEMBER OF STANDARD ASSURANCE COMMITTEE, MEMBER
    2022 to 2024 (National)
  • INSTITUTE OF MATERIALS, MALAYSIA: IMM, MEMBER
    2020 to present (National)
  • MALAYSIAN TRIBOLOGY SOCIETY, MEMBER
    Since 2015 (National)
  • THE INSTITUTION OF ENGINEERS MALAYSIA, MEMBER
    Since 2015 (National)
  • BOARD OF ENGINEERS MALAYSIA, GRADUATE MEMBER
    Since 2014 (National)

AWARD AND STEWARDSHIP

  • GOLD MEDAL
    Malaysian Invention and Design Society (MINDS), 2022 (International)
  • CERTIFICATE OF EXCELLENT SERVICE
    University of Malaya, 2022 (University)
  • Panelist/Judge for English Presentation Programme (Kumamoto Perfectural Amakusa High School, japan)
    University of Malaya, 2020 (International)
  • Panelist/Judge for English Presentation Programme (Kumamoto Perfectural Amakusa High School, japan)
    University of Malaya, 2019 (International)
  • Jury/Judge for BEGIN Challenge 2019
    University of Malaya, 2019 (National)
  • Panel of jury for BEGIN Challenge 2018
    University of Malaya, 2018 (National)
  • Gold Award At International Conference and Exhibitions On Inventions by Institutions of Higher Learning (Pecipta 2017) for Automated Methadone Dispenser for Drug Addiction Treatment Program
    Institutions of Higher Learning, Malaysia, 2017 (International)
  • Session Best Paper award at the 4th International Conference on Advances in Engineering Science and Applied Mathematics (ICAESAM'2015)
    International Institute of Engineers, 2015 (International)
  • ITEX Gold Medal for the invention of A Novel Method of Brazing Sapphire and Inconel for Gas Pressure Sensor Application
    Malaysian Invention and Design Society, 2015 (International)
  • Best Paper Award
    High Impact Research-Joining Technology Symposium, 2012 (International)

PUBLICATIONS

Article in Journal
WoS
  1. Aziz, Nur Syazana; Ibrahim, Suriani; Zaharinie, Tuan; Tang, Swee Seong (2025). Bacteriophage encapsulation - Trends and potential applications in aquaculture, AQUACULTURE. 594. doi:10.1016/j.aquaculture.2024.741398
  2. Zaib, Fathiah; Ganesan, P.; Zaharinie, Tuan; Chen, Zhenqian; Naganthran, Kohilavani (2024). Heat transfer performance of a compact heat exchanger based on metal foam and Thermal Interface Material (TIM), INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER. 231. doi:10.1016/j.ijheatmasstransfer.2024.125861
  3. Ganesan, P.; Zaib, Fathiah; Zaharinie, Tuan; Mobedi, Moghtada; Gnanasekaran, N. (2023). Thermal resistance of Open-Cell metal foam with thermal interface materials (TIM), APPLIED THERMAL ENGINEERING. 218. doi:10.1016/j.applthermaleng.2022.119336
  4. Mansoor, M. A.; Munawar, K.; Naeem, R.; Sarih, N. M.; Asghar, M. A.; Haider, A.; Zubir, M. N. M.; Zaharinie, T. (2023). Aerosol-assisted facile fabrication of bimetallic Cr2O3-Mn2O3 thin films for photoelectrochemical water splitting, NEW JOURNAL OF CHEMISTRY. 47(17), 8347-8354. doi:10.1039/d2nj06274g
  5. Munawar, Khadija; Mansoor, Muhammad Adil; Naeem, Rabia; Rizwan, Muhammad; Ahmad, Muhammad Shakeel; Zaharinie, Tuan; Zubir, Mohd Nashrul Mohd; Aspanut, Zarina (2023). Effect of deposition temperature on topography and electrochemical water oxidation of NiO thin films, THIN SOLID FILMS. 782. doi:10.1016/j.tsf.2023.140031
  6. Zaharinie, Tuan; Huda, Zainul; Ibrahim, Suriani; Yusof, Farazila; Hamdi, Mohd; Rehan, Mohammad; Ariga, Tadashi (2022). Analysis of the Reaction Layer Formed during Sapphire-Sapphire Brazing Using a Ag-Cu-Ti Filler Metal for Gas-Pressure Sensors, ACS APPLIED ELECTRONIC MATERIALS. 4(5), 2405-2412. doi:10.1021/acsaelm.2c00213
  7. Naeem, R., Mansoor, M. A., Munawar, K., Adnan, A., Zaharinie, T., & Zubir, M. N. M. (2021). Versatile Fabrication of Binary Composite SnO2-Mn2O3 Thin Films by AACVD for Synergistic Photocatalytic Effect. Journal of Electronic Materials, 50(7), 3897-3906. doi: 10.1007/s11664-021-08897-6
  8. Ahmed, S. M., Kazi, S. N., Khan, G., Akram, N., Dahari, M., Zubir, M. N. M., . . . Zaharinie, T. (2020). Experimental investigation on drag reduction of flowing crop suspensions of the pulp fibers in circular pipe heat exchanger. Particulate Science and Technology, 38(4), 443-453. doi: 10.1080/02726351.2018.1564093
ESCI
  1. Huda, Zainul; Zaharinie, Tuan; Aniszulaikha, Ireen; Almitani, Khalid (2023). Austenite-Grain-Growth Kinetics and Mechanism in Type 347H Alloy Steel for Boiler Tubes, ADVANCES IN MATERIALS SCIENCE. 23(3), 79-97. doi:10.2478/adms-2023-0018
  2. Rozaimay, Ramizah; Zahari, Tuan Zaharinie Tuan; Buys, Yose Fachmi; Huda, Zainul; Ganesan, Poo Balan; Ariga, Tadashi (2023). INVESTIGATION ON MICROSTRUCTURE AND COMPRESSIVE STRENGTH OF BRAZING POROUS NICKEL TO COPPER AND STAINLESS STEEL, ACTA METALLURGICA SLOVACA. 29(3), 148-154. doi:10.36547/ams.29.3.1863
  3. Sulaiman, H. A. J.; Aiman, M. H.; Ishak, M.; Quazi, M. M.; Zaharinie, T.; Ariga, T. (2021). Vacuum brazing of titanium alloy to stainless steel enhance by fiber laser surface texturing, JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES. 15(4), 8601-8607. doi:10.15282/jmes.15.4.2021.12.0678
Others
  1. Khadija Munawar, Muhammad Adil Mansoor, Marilyn M. Olmstead, Tuan Zaharinie, Mohd Nashrul Mohd Zubir, Mohamad Haniffa, Wan Jefrey Basirun and Muhammad Mazhar. (2020). Fabrication of Ag-ZnO composite thin films for plasmonic enhanced water splitting. Materials Chemistry and Physics, 255, 123220.
  2. Khadija Munawar, Muhammad Adil Mansoor, Vickie McKee, Tuan Zaharinie, Mohd Nashrul Mohd Zubir, Zarina Aspanut, Farazila Binti Yusof and Muhammad Mazhar. (2020). Optical and photocatalytic properties of biomimetic cauliflowered Ca2Mn3O8-CaO composite thin films. Journal of Solid State Chemistry, 290, 121552
  3. Sami, M.M., Zaharinie, T., Yusof, F., and Ariga, T. (2020) Effects of Brazing Parameters on the Microstructural and Mechanical Properties of a Porous Copper Heatsink, Special issue on Green Manufacturing Processes and Systems.
  4. Sami, MM; Zaharinie, T; Yusof, F; Ariga, T 2020. Investigation on Strength and Microstructural Evolution of Porous Cu/Cu Brazed Joints Using Cu-Ni-Sn-P Filler. METALS
  5. Syed Muzamil Ahmed, Salim Newaz Kazi, Ghullamullah Khan, Naveed Akram, Mahidzal Dahari, Mohd Nashrul Mohd Zubir, Pervaiz Ahmad, Tuan Zaharinie. Experimental investigation on drag reduction of flowing crop suspensions of the pulp fibers in circular pipe heat exchanger, Particulate Science and Technology, 2019:1-11.
  6. A. Amran, M.Sayuti, A. Rusdi, T. Zaharinie, A. Latif Improvement of Methadone Maintenance Treatment (MMT) Process Through Development and Implementation of Methadone Dispenser, Journal of Testing and Evaluation (2018)
  7. Amiri, A., Shanbedi, M., Rafieerad, A.R., Rashidi, M.M., Zaharinie, T., Zubir, M.N.M., Kazi, S.N., Chew, B.T. (2017). Functionalization and exfoliation of graphite into mono layer graphene for improved heat dissipation. Journal of the Taiwan Institute of Chemical Engineers, 71, 480-493.
  8. Hosseini, M., Sadri, R., Kazi, S.N., Bagheri, S., Zubir, N., Teng, C.B., Zaharinie, T. (2017). Experimental study on heat transfer and thermo-physical properties of covalently functionalized carbon nanotubes nanofluids in an annular heat exchanger: A green and novel synthesis. Energy & Fuels, 31, 5635 - 5644.
  9. Maryam Hosseini, Kazi Salim Newaz, Samira Bagheri, Nashrul Zubir, Khalid Solangi, Tuan Zaharinie, Ahmad Badarudin. A bio-based, facile approach for the preparation of covalently functionalized carbon nanotubes aqueous suspensions and their potential as heat transfer fluids. Journal of Colloid and Interface Science
  10. Sadri, R., Hosseini, M., Kazi, S.N., Bagheri, S., Zubir, N., Ahmadi, G., Dahari, M., Zaharinie, T. (2017). A novel, eco-friendly technique for covalent functionalization of grephene nanoplatelets and the potential of their nanofluids for heat transfer applications. Chemical Physics Letters, 675, 92 - 97.
  11. Sarsam, W.S., A. Amiri, M. Shanbedi, S.N. Kazi, A. Badarudin, H. Yarmand, K. Bashirnezhad, and T. Zaharinie, Synthesis, stability, and thermophysical properties of aqueous colloidal dispersions of multi-walled carbon nanotubes treated with beta-alanine. International Communications in Heat and Mass Transfer, 2017. 89: p. 7-17.
  12. Tuan Zaharinie, Zainul Huda, Mohd Faaliq Izuan, Mohammed Hamdi. 2015. Development of optimum process parameters and a study of the effects of surface roughness on brazing of copper. Applied Surface Science 331 : 127-131.
  13. T. Zaharinie, F. Yusof, M. Fadzil, M. Hamdi, T. Ariga. 2014. Microstructural analysis of brazing sapphire and Inconel 600 for sensor applications. Materials Research Innovations 18 (S6) : S6-68 - S6-72.
  14. T. Zaharinie, F. Yusof, M. Hamdi, T. Ariga. 2014. Brazing of Inconel 600 by Active Filler Metal. Materials Research Innovations 18(S6) : S6-260 - S6- 263.
  15. Tuan Zaharinie, Farazila Yusof, Mohd Hamdi, Tadashi Ariga, Raza Moshwan. 2014. Effect of brazing temperature on the shear strength of Inconel 600 joint. International Journal of Advanced Manufacturing Technology 73(5-8) : 1133-1140.
  16. Tuan Zaharinie, Raza Moshwan, Farazila Yusof, M. Hamdi, Tadashi Ariga. 2014. Vacuum brazing of sapphire with Inconel 600 using Cu/Ni porous composite interlayer for gas pressure sensor application. Materials & Design 54 : 375-381.
  17. Tuan Zaharinie, Yusof, F., Hamdi, M. & Ariga, T. 2014. Effect of Annealing Temperature on Tensile Properties of Inconel 600. Australian Journal of Basic and Applied Sciences 8(19) : 320-323.
  18. Z Huda, T Zaharinie, IHSC Metselaar, S Ibrahim, Goh J Min. 2014. Kinetics of Grain Growth in 718 Ni-Base Superalloy. Archives of Metallurgy and Materials 59(3) : 847-852.
  19. Zainul Huda, Tuan Zaharinie, Hany A Al-Ansary. 2014. Enhancing power output and profitability through energy-efficiency techniques and advanced materials in today's industrial gas turbines. International Journal of Mechanical and Materials Engineering 9(1) : 1-12.
  20. Tuan Zaharinie, Farazila Yusof, Mohd Hamdi, Tadashi Ariga, Mohd Fadzil. 2013. Microstructure analysis of brazed sapphire to Inconel 600 using porous interlayer. Welding Journal 92 : 332-s - 335-s.
  21. T. Zaharinie, Farazila, M. Hamdi, T. Ariga. 2012. A study on interfacial reaction and titanium distribution in brazing sapphire to Inconel 600 using Cu/Ni porous composite. Advanced Materials Research 383 : 898-902.
  22. Huda Zainul, Zaharinie Tuan, Humailul Islam Syed. 2011. Effects of annealing parameters on grain-growth behavior of HAYNES -718 superalloy. International Journal of Physical Sciences 6(30) : 7073-7077.
  23. Zainul Huda, Tuan Zaharinie, Goh J Min. 2010. Temperature effects on material behavior of aerospace aluminum alloys for subsonic and supersonic aircrafts. Journal of Aerospace Engineering 23(2) : 124-128.
  24. Zainul Huda, Nur Iskandar Taib, Tuan Zaharinie. 2009. Characterization of 2024-T3: An aerospace aluminum alloy. Materials Chemistry and Physics 113(2-3) : 515- 517.
  25. Zainul Huda, Tuan Zaharinie. 2009. Kinetics of grain growth in 2024-T3: An aerospace aluminum alloy. Journal of Alloys and Compounds 478(1-2) : 128-132.
Chapter in Books
  1. Mohd Hamdi, Farazila Yusof, Mohd Fadzil, Tuan Zaharinie, Tadashi Ariga. 2013. The Influence of Adding Porous Interlayer in the Brazing of Ceramic to Metal. Integration of Practice-Oriented Knowledge Technology: Trends and Prospectives. Pages 303-314. Springer Berlin Heidelberg
Article in Proceeding
  1. Mian Muhammad Sami, Tuan Zaharinie, Farazila Yusof, Tadashi Ariga. (2018). Investigation on microstructural and mechanical properties of porous copper heat sink. Proceedings of Mechanical Engineering Research Day, pp. 248 - 250.
  2. Mohd Kamarulazwan, Mohd Sayuti, Tuan Zaharinie, Azisyarina Azizan (2018). A Descriptive Analysis to Develop Technologies Capability Database for Rapid Tooling Application. Proceedings of Mechanical Engineering Research Day 2018, 184-186.
  3. Mohd Kamarulazwan, Tuan Zaharinie. (2018). Computer Application Software to Predict Mechanical Defect on the Built Object Produced By Laser-Based Additive Manufacturing Process. Proceedings of International Conference on Tourism, Technology and Business Management (ICTTBM 2018), 209-216.
  4. Tuan Zaharinie, Amirul Aliff, Mohd Hamdi, and Tadashi Ariga. Brazing Diamond Grits to Stainless Steel using Active Filler Metal and Porous Nickel as Interlayer: Analysis on the Interface of Porous Nickel/Stainless Steel , IOP Science Conference Series: Materials Science and Engineering (Accepted)
  5. Mohd Kamarulazwan, Suriani Ibrahim, Tuan Zaharinie, Applying Technology Management Concepts in Additive Manufacturing, Proceeding: International Conference on Social Sciences, Humanities and Technology (ICSHT 2017)
  6. Mohd Kamarulazwan b. Mohd Zain, Tuan Zaharinie bt. Tuan Zahari, Mohd Sayuti b. Karim, Nur Aqilah bt. Derahman, Nor Amirah bt. Mohd Amran. (July, 2016). Rapid Tooling Technologies in Additive Manufacturing. Paper presented at the Symposium & Exhibition on Additive Manufacturing (SEAM), Penang, Malaysia.
  7. T. Zaharinie, M. Sami, F. Yusof, T. Ariga. (2016). Temperature effects on microstructures of brazing porous copper to copper using Cu-based filler metal. Proceedings of the 11th International Conference on Brazing, High Temperature Brazing and Diffusion Bonding, 216 219.
  8. F. Yusof, T.Z.T. Zahari, M.F. Jamaludin, M.H.A. Shukor. 2012. Effect of Porous Interlayer in the Brazing of Sapphire to Inconel 625. Pages 89-92. Edited by R. Gourley and C. Walker. Proc 5th International Brazing and Soldering Conference. Las Vegas, Nevada, USA.
  9. T. Zaharinie, F. Yusof, M. Hamdi, T. Ariga. 2012. Effect of Vacuum Brazing Temperature to the Shear Strength of Inconel 600 Alloy using AgCuTi Filler Alloy. Pages 23-33. High Impact Research-Joining Technology Symposium, Kuala Lumpur, Malaysia.
  10. T. Zaharinie, F. Yusof, M. Hamdi, T. Ariga. 2012. A Study on the Distribution of Ni and Ti during the Brazing of Sapphire with Inconel 600 by Using Cu/Ni Porous Composite. Pages 67-70. Edited by R. Gourley and C. Walker. Proc 5th International Brazing and Soldering Conference, Las Vegas, Nevada, USA.
Other Publications
  1. Mian Muhammad Sami,Tuan Zaharinie, Farazila Yusof, Tadashi Ariga. (2016, August). Effects of Brazing Parameters to Microstructure and Mechanical Properties of Brazing Porous Copper to Copper. Paper presented at the Advanced Processes and Systems in Manufacturing: An International Conference. - Extended Abstract

RESEARCH PROJECT

National
  1. 2022 - 2024, Others MOHE - Top 100 (IIRG)-IISS
    Development Of Macrocapsule Biopolymer Loaded With Bacteriophage Using Layer-by-layer Technique ( Principal Investigator(PI))
  2. 2019 - 2023, Fundamental Research Grant Scheme (FRGS)
    Passive Radiative Cooling Of Multi-layered Nanostructured Based Emitter-reflector Metamaterial For Enhanced Heat Management ( Principal Investigator(PI))
  3. 2021 - 2022, KW PNC(JIM)
    Breathewall ( Principal Investigator(PI))
  4. 2018 - 2021, RU Geran - Fakulti Program
    Brazing Copper To Stainless Steel With Addition Of Porous Metal Interlayer Using Cu-sn-ni-p Filler Metal For Heat Exchanger Application ( Principal Investigator(PI))
  5. 2015 - 2019, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC))
    Investigation Of The Influence Of Various Technologies Portfolio On Rapid Tooling ( Principal Investigator(PI))
  6. 2015 - 2018, Fundamental Research Grant Scheme (FRGS)
    Investigation On The Utilization Of Porous Metal And Active Filler Metal In Brazing Diamond Grits To Stainless Steel ( Principal Investigator(PI))
  7. 2015 - 2017, Bantuan Kecil Penyelidikan (BKP)
    Brazing porous copper to copper for the potential application of cooling devices ( Principal Investigator(PI))
  8. 2023 - 2025, Geran Penyelidikan Negeri Selangor (GPNS)
    Performance of Brazed 3D Printed Nanostructured Copper Open Cell Foam Heat Exchanger, Segi University ( Co-Researcher)
  9. 2010 - 2011, Postgraduate Research Grant(PPP)
    The Effects of Introducing Porous Metal Interlayer for Brazing Silicon Nitride to Metal ( Principal Investigator(PI))
  10. 2007 - 2008, Postgraduate Research Grant(PPP)
    Grain-growth Kinetics and Material Behavior of an Aerospace Aluminum Alloy ( Principal Investigator(PI))

CONSULTANCY PROJECT

  • Nano-Indentation of Silicon Wafer, Freescale Semiconductor (M) Sdn. Bhd.
    01 Dec 2015 - 01 Dec 2016 (National)

PAPER PRESENTED

INVITED SPEAKER
  1. Investigation on Brazing Porous Copper to Copper for Heat Exchanger Application, INTERNATIONAL SEMINAR IN ADVANCED JOINING & WELDING TECHNIQUES, AMMP, collaboration with Liverpool John Moores University, UK (International) (15 Oct 2020 - 15 Oct 2020)
  2. Joining Technology: Fundamental of Brazing, Erasmus+ International Credit Mobility (ICM) Programme, Dicle University (Erasmus+ Programme) (International) (08 Apr 2019 - 12 Apr 2019)
  3. Fundamentals of Brazing, Workshop in Brazing - From Fundamental to Defect in Brazing Joint , Centre of Advanced Manufacturing and Material Processing (AMMP Centre), University of Malaya  (National) (12 Jun 2015)
ORAL PRESENTER
  1. Characterization of Carbon Nanospheres Produced using Green Precursor and Microhardness Test of Carbon Nanospheres Composite Materials, Euronanosciences 2019, 31st International Conference and Expo on Nanosciences and Nanotechnology, Conference Series (International) (18 Nov 2019 - 19 Nov 2019)
POSTER PRESENTER
  1. AMMP Centre, University Malaya Research Carnival (UMRC) 2018 Poster Competition, University of Malaya (University) (15 Nov 2018 - 17 Nov 2018)
  2. A Novel Method in Brazing Sapphire to Inconel 600, University of Malaya Researchers' Conference (UMRC 2013) (19 Nov 2013 - 20 Nov 2013)
PRESENTER
  1. Brazing Diamond Grits to Stainless Steel using Active Filler Metal and Porous Nickel as Interlayer: Analysis on the Interface of Porous Nickel/Stainless Steel, 5th International Conference on Advanced Materials, Mechanics and Structural Engineering (5th AMMSE 2018), IOP Publishing (International) (19 Oct 2018 - 21 Oct 2018)
  2. Applying Technology Management Concepts in Additive Manufacturing, Proceeding: International Conference on Social Sciences, Humanities and Technology (ICSHT 2017), Global Academic Excellence (International) (02 Dec 2017 - 03 Dec 2017)
  3. Temperature effects on microstructures of brazing porous copper to copper using Cu-based filler metal, 11th International Conference on Brazing, High Temperature Brazing and Diffusion Bonding (2016), German Welding Society (International) (07 Jun 2016 - 09 Jun 2016)
  4. Analysis on Reaction Layer Formation for Brazing Sapphire using Silver-copper-titanium Filler Metal, 4th International Conference on Advances in Engineering Sciences and Applied Mathematics (ICAESAM'2015), International Institute of Engineers (International) (08 Dec 2015 - 09 Dec 2015)
  5. Parameter effects on reaction layer formation for brazing sapphire using active filler metal, AUN/SEED-Net Regional Conference on Materials Engineering (2014) (11 Nov 2014 - 12 Dec 2014)
  6. Effect of Annealing Temperature on Tensile Properties of Inconel 600, The International Conference on Engineering and Built Environment (ICEBE 2013) (19 Nov 2013 - 20 Nov 2013)
  7. Brazing of Inconel 600 by Active Filler Metal, International Conference on the Science and Engineering of Materials (ICoSEM 2013) (13 Nov 2013 - 14 Nov 2013)
  8. Effect of Vacuum Brazing Temperature to the Shear Strength of Inconel 600 Alloy using AgCuTi Filler Alloy, High Impact Research-Joining Technology Symposium (National) (16 May 2012)
  9. A Study on the Distribution of Ni and Ti during the Brazing of Sapphire with Inconel 600 by Using Cu/Ni Porous Composite, Proc 5th International Brazing and Soldering Conference, ASM International (International) (22 Apr 2012 - 25 Apr 2012)
  10. Effect of Porous Interlayer in the Brazing of Sapphire to Inconel 625, Proc 5th International Brazing and Soldering Conference, ASM International (International) (22 Apr 2012 - 25 Apr 2012)
  11. A study on interfacial reaction and titanium distribution in brazing sapphire to Inconel 600 using Cu/Ni porous composite, International Conference on Manufacturing Science and Technology (ICMST 2011) (16 Sep 2011 - 18 Sep 2011)
  12. Temperature effect on material behavior of 2024-T3 aluminum alloy, 2nd International Conference on Science & Technology: Application in Industry (ICSTIE 08) (12 Dec 2008 - 13 Dec 2008)
OTHERS
  1. AMMP Centre, University of Malaya Research Carnival (UMRC 2018), University of Malaya (University) (15 Nov 2018 - 17 Nov 2018)

ACADEMIC/PROF. SERVICES

Evaluation
  1. (2023) Master (Cw): Heat Transfer and Friction Loss Analysis of Nano Composite Fluid in a Single Tube Heat Exchanger (Muhammad Littaqwim Mohd Lotfi ), University, (Internal Examiner)
  2. (2023) Master (Cw): Improvement of Heat Transfer in Separation Flow Using Titanium Oxide Nanofluid (Muhammad Faiz B. Mohd Bafana), University, (Internal Examiner)
  3. (2023) Panel for Pd: a Comparative Study... (S2160618/1 ), University, (Reviewer)
  4. (2023) Master (R): Pre-Heat Assisted Friction Stir Welding of Thin Mild Steel (Seyed Mehrdad Yamani), University, (Internal Examiner)
  5. (2022) Phd: Elucidation of Surface and Antibacterial Characters of Silver... (Mohd Amirul), National, (Internal Examiner)
  6. (2022) Master (Cw): Computer Aided Simulation On Resistance Spot Welding for Steel and Itanium Alloy With Variable Weld Geometry (Nithia Kumar Kasava), University, (Internal Examiner)
  7. (2022) Cd for Phd: The Aeration Design of Bioflocaquaculture... (Siti Sarah), University, (Internal Examiner)
  8. (2022) Cd for Meng: Flip Chip Chip-Scale Package... (Wan Zamir), University, (Internal Examiner)
  9. (2022) Master (Cw): Improving Thermal Heat Dissipation from Solat Panel Via High Performance Colloidal Liquid (Nuralmeera Balqis Mohd Azlan), University, (Internal Examiner)
  10. (2022) Master (R): Development of a Novel Pipe Internal Grooving Technique Using Closed-Magnetic Field Principle (Rony Md Mehedy Hasan), University, (Internal Examiner)
  11. (2022) Master (Cw): Heat Transfer to Two Phase Flow and Fouling Mitigation Bt Synthetic Fibre Additives (Thineskumar a/L Ramalingam), University, (Internal Examiner)
  12. (2022) Master (Cw): Study of Delayed Cracking Behaviors of Hydrogen Charged Sus304 Deep Drawn Cylinderical Cups Under Elevated Blank Holding Forces (Mohd Shahir Hadzir ), University, (Internal Examiner)
  13. (2021) Internal Examiner for Masters by Coursework, Student Id: S2003268/1, University, (Internal Examiner)
  14. (2021) Phd Thesis Internal Examiner, University, (Internal Examiner)
  15. (2021) Panel 1 for Cd, Student Id: , 17198541/1, University, (Internal Assessor)
  16. (2021) Panel 1 for Cd, Student Id: 17202584/1, University, (Internal Assessor)
  17. (2021) Imm Internal Auditor for Ms Iso/Iec 17024 Audit, National, (Internal Evaluator)
  18. (2020) Reviewer for Journal of Alloys and Compounds - Brazing of graphite and stainless steel, (Reviewer)
  19. (2020) Assessor for Faculty Grant 2020, (ASSESSOR)
  20. (2020) Master by Course Thesis - "STUDY OF HEAT TRANSFER AND FRICTION LOSS OF NANOFLUID SUSPENSION FLOW IN SQUARE PIPE HEAT EXCHANGER " , (Internal Examiner)
  21. (2020) PhD Thesis - Mechanical and Microstructure Analysis of Copper Foam Brazing.... , (Internal Examiner)
  22. (2019) Master Thesis - (KQK160018) "STUDY OF PUNCHER MATERIALS FOR SINGULATION PROCESS IN SEMICONDUCTOR MANUFACTURING INDUSTRY" , (Internal Examiner)
  23. (2019) Reviewer for Journal of Materiomics , (Reviewer)
  24. (2019) Reviewer for Journal of Manufacturing Processes , (Reviewer)
  25. (2019) Master Thesis - (KGA170010) "MICROWAVE AND CONVENTIONAL SINTERING OF MANGANESE-DOPED ALUMINA: DENSIFICATION AND MECHANICAL PROPERTIES" , (Internal Examiner)
  26. (2019) Master Thesis - (KQK170011) "STUDY ON MORPHOLOGY AND ELECTRICAL PROPERTIES OF GRAPHENE OXIDE DECORATED WITH NICKEL OXIDE FOR ELECTROCHEMICAL SENSOR" , (Internal Examiner)
  27. (2018) Doctoral Thesis - (KHA140129) GREEN APPROACH TO FUNCTIONALIZE HIGHLY STABLE GRAPHENE NANOPLATELETS (GNP) COLLOID FOR HEAT BASED APPLICATIONS , (Internal Examiner)
  28. (2018) Reviewer for ICoSEM 2017, (Reviewer)
  29. (2018) Reviewer for Journal of Mechanical Engineering and Sciences (JMES), (Reviewer)
  30. (2018) Master Thesis - (KQJ170006) "FORMATION OF GERMANIUM OXYNITRIDE AS BUFFER LAYER ON GERMANIUM SUBSTRATE" , (Internal Examiner)
  31. (2018) Reviewer for Ultrasonics, (Reviewer)
  32. (2017) Doctoral Thesis (KHA120086) - WELDING OF T- JOINT CONFIGURATION BETWEEN DISSIMILAR METALS USING LOW POWERED FIBER LASER , (Internal Examiner)
  33. (2017) Reviewer of 3 articles for ICoSEM 2017 conference - to be published in The American Institute of Physics (AIP) Conference Series, (Reviewer)
  34. (2017) Reviewer for Materials Chracterization, (Reviewer)
  35. (2017) Reviewer for Journal of Vacuum_ In Situ.., (Reviewer)
  36. (2017) Reviewer for Journal of Materials Engineering and Performance_Structural.. , (Reviewer)
  37. (2017) Reviewer for Materials & Design, (Reviewer)
  38. (2017) Reviewer for Advances in Materials & Processing Technologies_Aeronautical... , (Reviewer)
  39. (2017) Reviewer for Journal of Physical Science, (Reviewer)
  40. (2016) Doctoral Thesis (KHA130085) - INVESTIGATION ON MECHANICAL, MICROSTRUCTURAL AND THERMAL PROPERTIES OF Sn-0.7Cu AND Sn-1Ag-0.5Cu SOLDER ALLOYS BEARING Fe AND Bi , (Internal Examiner)
  41. (2016) Reviewer for Advances in Materials & Processing Technologies Conference (AMPT) 2016, (Reviewer)
  42. (2016) Peer reviewer for the special issue on TMAC Symposium 2016 of the Jurnal Teknologi (E ISSN 2180-3722) , (Reviewer)
  43. (2016) Reviewer for Journal of Science and Technology , (Reviewer)
  44. (2016) Reviewer for Journal of Vacuum_Diffusion.., (Reviewer)
  45. (2016) Reviewer for Journal of Vacuum_Microstructure, (Reviewer)
  46. (2016) Reviewer for Journal of King Abdulaziz University - Engineering Sciences , (Reviewer)
  47. (2015) Evaluation panel for PPP grant Cycle 1/2015, IPPP , (Evaluation Panel)
  48. (2015) Reviewer for Journal of Materiomics , (Reviewer)
Contribution to external organisation
  1. (2023) Auditor - Standard Assurance Committee (Sac), National, (Auditor)
  2. (2023) Teaching for Program UM-Csust, International, (Academic Appointment )
  3. (2022) Internal Auditor for Ms Iso/Iec 17024 Audit, National, (Auditor)
  4. (2022) Involvement in Stem Activities - Breathwall Project for SMK (P) Sri Aman, National, (Expert Advisor)
  5. (2017) Editorial Board of Acta Materialia Turcica (ActaMAT), Acta Materialia Turcica (ActaMAT)
Mentoring
  1. (2024) Mentoring for Program: Tnb Better Energy Campaign - Reimagining The Future: Better Energy Visualised by Our Future Generation, National, (Mentor)
  2. (2024) Master Student (by Coursework) Research Project Supervision: Haris Zulfikri Bin Azman, University, (Mentor)

SUPERVISION

Postgraduate Student
PhD/ Doctoral
  1. (2024) Development of Macrocapsule Biopolymer Phage Cocktail via Layer-By-Layer Technique for Treatment of Bacterial Co-Infection in Tilapia Aquaculture Industry, NUR SYAZANA BINTI AZIZ
  2. (2024) POST-FIRE INFLUENCE ON MICROSTRUCTURAL AND MECHANICAL BEHAVIOR OF VARIOUS GRADES OF AUSTENITIC STAINLESS STEEL IN CONSTRUCTION APPLICATIONS, HAITHAM ABDALLAH KHAMIS
  3. (2024) ENHANCEMENT OF POOL BOILING HEAT TRANSFER CHARACTERISTICS USING LASER-TEXTURED COPPER-GROOVED SURFACES, LUVINDRAN A/L SUGUMARAN
  4. (2024) Development of Compact Heat Exchanger Based on Open-Cell Metal Foam and Thermal Interface Material, NOOR FATHIAH BINTI MOHD ZAIB
  5. (2020) MULTILAYER NANOSTRUCTURED METAMATERIAL FOR ENERGY FREE RADIATIVE COOLING, DESRINO BIN JALANI
  6. (2018) DEVELOP AND MANUFACTURE NEW TYPE OF HEAT EXCHANGER BASED ON METAL FOAM OPEN CELL TYPE, NOOR FATHIAH BINTI MOHD ZAIB
  7. (2017) Develop and Manufacture New Type of Heat Exchanger Based on Metal Foam Open Cell Type, NOOR FATHIAH BINTI MOHD ZAIB
Master
  1. (2023) Compressive Strength and Microstructural Characterization of Porous Nickel Brazed to Copper and Stainless Steel, RAMIZAH BINTI ROZAIMAY
  2. (2020) MICROSTRUCTURE AND MECHANICAL PROPERTIES OF POROUS COPPER AND COPPER BRAZED WITH CU-BASED FILLER METAL, MIAN MUHAMMAD SAMI
  3. (2019) INVESTIGATION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES ON JOINING STAINLESS STEEL TO COPPER WITH ADDITION OF POROUS AS INTERLAYER, RAMIZAH BINTI ROZAIMAY
  4. (2019) INVESTIGATION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF BRAZING POROUS COPPER TO COPPER USING CU-BASED FILLER METAL, MIAN MUHAMMAD SAMI
  5. (2017) ROLE OF INERT GAS TO REDUCE MECHANICAL DEFECT OF THE BUILT OBJECT FABRICATED BY SLM PROCESS, MOHAMED I HAMEDELGADARI
  6. (2015) Investigation on Microstructure and Mechanical Properties of Brazing Porous Copper to Copper Using Cu-based Filler Metal, Mian Muhammad Sami
Under Graduate Students
  1. (2024) Producing Single/Multilayer Microcapsule Biopolymers for Applications in Aquaculture and Underwater Life in Tasek Varsiti
  2. (2024) Design and Development of Laboratory Scale Hydraulic Press for Recycling Machining Chip Waste Project
  3. (2024) Comparing Two Distinct Approaches for Recycling Aluminum Alloy Machining Chip Waste
  4. (2024) Comparing Spot Welding of Dissimilar Materials for Electric Vehicle Battery Tab Cells in Automotive Applications: With and Without Filler Metal
  5. (2024) A Simulation of Brazing Porous Ni to Copper and Stainless Steel
  6. (2023) Spot Weld Dissimilar Materials for Automotive Electric Vehicle Battery Tab Cells
  7. (2023) IDP: Advanced Safety Helmet
  8. (2023) Heat Transfer Performance of Different Configuration Metal Foam and Fin for Compact Heat Exchanger: A Simulation
  9. (2023) Characterization of Recycled Machining Chip Waste - Metal/Alloys II
  10. (2023) Characterization of Recycled Machining Chip Waste - Metal/Alloys I
  11. (2023) Industrial Training, MUHAMMAD FAISAL BIN ABDUL MU'IS, MUHAMMAD NAUFAL BIN MUHAMMAD YAZID, MUHAMMAD HAKIMI BIN YUSNI, HAZMAN DANIAL BIN MOHAMED, MUHAMMAD SYAIFUL BIN LOKMAN
  12. (2022) Utilization of porous metal in heat sink for central processing unit in a computer by simulation
  13. (2022) The Effects of Annealing Heat Treatment on the Microstructure and Hardness of 347H Heat Resistant Steel
  14. (2022) Simulation on Brazing Sapphire to Stainless Steel with and without Woven Metal Interlayer
  15. (2022) Simulation on Brazing Sapphire to Stainless Steel with and without Porous Metal Interlayer
  16. (2022) Investigation on Heat Transfer Performance of Porous Metal and Fin Types Heat Exchanger
  17. (2022) IDP: Smart Sink
  18. (2022) FKUM UNDERGRADUATE RESEARCH FELLOWSHIP PROGRAMME GRANT: BRAZING POROUS METAL TO COPPER AND STAINLESS STEEL USING CU- BASED FILLER METAL
  19. (2021) FYP - The Effects of Graphene-containing Composite Filler Metal for Vacuum Brazing of Inconel 600
  20. (2021) FYP - Simulation and Experimentation: Brazing Porous Nickel to Copper and Stainless Steel
  21. (2021) FYP - Investigation on Bonding Diamond Grits to Stainless Steel using Stainless Steel Woven Interlayer
  22. (2021) FYP - Brazing Porous Nickel to Copper and Stainless Steel Using Copper Based and Silver-based Filler Metal
  23. (2021) FYP - Brazing Copper to Stainless Steel with Different Pore Sizes Porous Nickel Interlayer for Heat Exchanger Application
  24. (2019) FYP - The Effect of Parameter on Joining the Pure Copper to Stainless Steel with Addition of Porous Nickel as Interlayer
  25. (2019) FYP - Development of Porous Heat Exchanger for Enhanced Cooling of High Heat Flux Device
  26. (2019) FYP - Brazing Diamond Grits onto Stainless Steel Using Filler Metal and Stainless Steel Woven as an Interlayer
  27. (2018) FYP - Investigation on brazing porous metal to stainless steel
  28. (2018) FYP - Brazing Silicon Carbide (SiC) with Graphene Reinforced Active Filler Metal
  29. (2018) FYP - Brazing Sapphire with Graphene Reinforced Active Filler Metal
  30. (2018) FYP - Brazing diamond grits to stainless steel using porous metal as interlayer
  31. (2016) FYP - Investigation on the properties of Porous Copper
  32. (2016) FYP - Brazing Cu to Stainless Steel using Cu-based Filler Metal
  33. (2015) FYP - Resistance Spot Welding of Joining Austenitic Stainless Steel with Filler Metal
  34. (2015) FYP - Design & Development of Sample holder for Grinding/polishing Machine
  35. (2015) FYP - Brazing Porous Copper to Copper for Heat Exchanger
  36. (2015) FYP - Brazing Inconel 625 Using Active Filler Metal

TEACHING

Master
  1. (2018) KQX7001 - Research Methodology
  2. (2017) KQX7001 - Research Methodology
  3. (2017) KQX7001 - Research Methodology
  4. (2017) KXGX6101 - Research Methodology
  5. (2017) KXGX6101 - Research Methodology
  6. (2016) KQX7001 - Research Methodology
  7. (2016) KXGX6101 - Research Methodology
Bachelor
  1. (2023) KIG3005 - Energy and Environment
  2. (2023) KIG4066 - Rapid Manufacturing Technology
  3. (2022) KIG4025 - Computer Integrated Manufacturing
  4. (2022) KIG3005 - Energy and Environment
  5. (2022) KIG4049 - Machine Tool Engineering
  6. (2021) KIG4025 - Computer Integrated Manufacturing
  7. (2021) KIG4049 - Machine Tool Engineering
  8. (2021) KIG2008 - Manufacturing Technology
  9. (2021) GIG1005 - Social Engagement
  10. (2019) KCEP4101 - Advanced Manufacturing Processes
  11. (2019) KIG2008 - Manufacturing Technology
  12. (2019) KIG4049 - Machine Tool Engineering
  13. (2018) KMEB4343 - Casting Technology
  14. (2017) KMEB1105 - Production of Material
  15. (2016) KCEP1108 - Fluid Mechanics
  16. (2016) KCEP2113 - Basic Production Process
  17. (2016) KCEP4102 - Machine Tool Engineering
  18. (2015) KCEP1108 - Fluid Mechanics
  19. (2015) KCEP4307 - Surface Engineering
  20. (2015) KMEM2115 - Calculation and Numerical Method

PATENT/IPR

  • Method of Brazing
    Patent (National)

SOCIAL RESPONSIBILITY ACTIVITIES

  • Mentoring Program: Tnb Better Energy Campaign - Reimagining The Future: Better Energy Visualised by Our Future Generation, (26 Dec 2023 - 20 Jan 2024) (National)
  • Committee Member of Standards Assurance Committee for The 2022 - 2024 Council - Auditing Activities, (01 Aug 2023 - 18 Aug 2023) (National)
  • Judge for The Global Undergraduate Awards (Ua) Programme (2023) - Category: Engineering, (01 Jun 2023 - 10 Sep 2023) (International)
  • I-Weld - Sharing Research Expertise to Community of Silesian University of Technology (Sut), Poland, (20 Dec 2022 - 22 Jan 2023) (International)
  • Judge for The Global Undergraduate Awards (Ua) Programme - Category: Engineering, (01 Jun 2022 - 10 Sep 2022) (International)
  • Keepable Cancer Walk 2019, (22 Jun 2019 - 22 Jun 2019)
  • Musolla Committee Fkum, (03 May 2019 - 31 Dec 2019)
  • Clap Run 2019, (28 Apr 2019 - 28 Apr 2019)
  • Walk for Unity 2019, (27 Apr 2019 - 27 Apr 2019)
  • Run for Cancer - Run4cer 2019, (23 Mar 2019 - 23 Mar 2019)
  • Mentor, Begin Challenge 2019, (20 Mar 2019 - 24 Apr 2019)
  • Speedster Race 2019, (23 Feb 2019 - 23 Feb 2019)
  • Juri Begin Challenge 2018, (11 Apr 2018 - 11 Apr 2018)
  • Mentor of Begin Challenge 2018, (26 Feb 2018 - 11 Apr 2018)
  • Financial Contributor for Wwf Started from Year 2018, (21 Feb 2018 - 31 Dec 2019)
  • Being a Mentor for Beyond Engineering Challenge (Begin) Competition 2016, (25 May 2016 - 25 May 2016)
  • Penyelia Bagi Siswapreneur@Pprn Program, (11 May 2016 - 28 Feb 2017)
  • Penyelaras Subjek Jalinan Masyarakat Di Peringkat Jabatan, (01 Jan 2016 - 31 Dec 2016)
  • Financial Contributor for Unicef Started from Year 2015, (21 Apr 2015 - 31 Dec 2019)
  • Member of Malaysian Nature Society, (01 Oct 2014 - 30 Sep 2017)

COURSE ATTENDED

External Course
NATIONAL
  1. Educator@Virtual Learning Environment Program, Online @ Https://Vle.Tlgateway.Edu.My/ (26 Aug 2021 - 15 Sep 2021)