Curriculum Vitae

PROF. DR. GAN SENG NEON

Honorary Professor
  • Department of Chemistry
    Faculty of Science
  • sngan
  • +603-79674241

AREAS OF EXPERTISE

  • CONDUCTING POLYMERS
    polyaniline, sensors, improved flexibility, adhesion, detection of toxic wastes
  • NOVEL CROSSLINKING OF AMORPHOUS SILICA-FILLED RUBBER BY DICARBOXYLIC ACIDS
    amorphous silica, rice husk, epoxidized natural rubber, fumaric acid, crosslinking reactions.
  • ENVIRONMENTAL FRIENDLY MULCHES
    Environmental friendly, mulches, protection of seedlings, biodegradability, non-polluting, easy disposal.
  • PHYSICAL ORGANIC CHEMISTRY
    liquid ENR, degradation methods, mechanical break-down, uv-irradiation, chemical oxidations, mechanisms
  • SOFT AND BRITTLE MATERIALS
    PVC plasticisers, slow migration, enhanced properties
  • BIO-COMPATIBLE MATERIALS
    microemulsion, palm oil-based, drug carriers
  • SELF-HEALING MATERIALS
    Palm oil-based, core-shell, microcapsules, self-healing, epoxy matrix
  • ELECTROCHEMICAL MATERIALS
    Conducting polymer, optical sensor, microfibre
  • ELECTROSPINNING NANOFIBRES
    Electrospinning, nanofibres, stem-cells,
  • BIO-COMPATIBLE MATERIALS
    Microcapsules, self-healing, enhancing properties
  • ADHESIVE,COATING AND INK
    Palm oil-based toner resins
  • WASTE MANAGEMENT AND UTILIZATION
    Converting agriculture waste fibres into boards and roofing materials.
  • BIO-COMPATIBLE MATERIALS
    Palm Oil Based Dental Materials
  • MATERIAL PROCESSING TECHNOLOGY
    Converting Palm Oil into Polyols for Polyurethanes
  • BIOPLASTIC
    PHAs, Characterization, Application
  • CHEMISTRY OF CATALYSIS
    Ziegler-Natta Catalysts, Olefins Polymerization Catalysts, Hydrogenation catalysts
  • POLYMER CHEMISTRY
    Identification, synthesis, modification, characterization, application

ACADEMIC QUALIFICATION

  • PHD(1976) (UM), (Chemistry)
    Universiti Malaya (UM)
  • BSc(1973) (UM), (Science)
    Universiti Malaya (UM)
  • BSc(1972) (UM), (Science)
    Universiti Malaya (UM)

ADMINISTRATIVE DUTIES

  • Ahli Jawatan Kuasa Penilai Harta Intelek Universiti Malaya di UMCIC
    01 Jul 2018 - 30 Jun 2020 (National)
  • Wakil Perhubungan Industri (Industrial Liaison Officer,ILO)
    23 Mar 2015 - 10 Feb 2017 (Dean Office, Faculty of Science)
  • AJK Penilai bagi Permohonan Geran Penyelidikan IPPP
    04 Mar 2015 - 31 Dec 2016 (University Malaya)
  • Committee Member, AJK UMCIC
    02 Jan 2012 - 30 Dec 2016 (University Malaya)
  • Member of Dept R&D Committee
    14 Sep 2015 - 13 Sep 2016 (Department of Chemistry, Faculty of Science)
  • Committee Member :- AHLI JAWATANKUASA PENILAI PERMOHONAN UNTUK MENYERAHKAN "THESIS IN THE FORMAT OF PUBLISHED PAPERS
    22 Jun 2015 - 30 Jun 2016 (Department of Chemistry, Faculty of Science)
  • AJK Penilai Harta Intelek UM, UMCIC
    01 Jul 2014 - 30 Jun 2016 (University Malaya)
  • Member of Department R&D Committee, Chemistry Department
    01 Sep 2014 - 31 Aug 2015 (Department of Chemistry, Faculty of Science)
  • Member of UM Intellectual Properties Evaluation Committee
    10 Feb 2014 - 09 Feb 2015 (University Malaya)
  • Member of Higher Degrees Committee, Chem. Dept
    12 Sep 2013 - 11 Sep 2014 (University Malaya)
  • Member of Faculty of Science
    07 Feb 2011 - 06 Feb 2014 (Department of Chemistry, Faculty of Science)
  • Member of Physical Chemistry Section, Jabatan Kimia, UM
    07 Feb 2011 - 06 Feb 2014 (University Malaya)
  • Ahli Jawatankuasa Penilai Harta Intelek Universiti Malaya
    07 Feb 2012 - 06 Feb 2014 (University Malaya)
  • Committee member for R&D, Jabatan Kimia
    07 Feb 2011 - 06 Feb 2014 (Department of Chemistry, Faculty of Science)
  • Ahli Majlis Unit Perundingan Universiti Malaya
    06 Aug 2011 - 07 Aug 2012 (University Malaya)
  • AJK Penilaian Harga bagi Pembelian Rheometer Jabatan Kimia
    24 Feb 2011 - 31 Mar 2011 (Department of Chemistry, Faculty of Science)
  • Division Chairman
    01 Apr 1982 - 30 Jun 1983 (Chemistry Division, Centre for Foundation Studies in Science)

MEMBERSHIPS

  • COMITTEE MEMBER OF IKM DIVISION OF POLYMERS & MATERIALS CHEMISTRY 2024/25, COMMITTEE MEMBER
    Since 2024 (National)
  • IKM DIVISION OF POLYMER AND MATERIALS CHEMISTRY COMMITTEE FOR 2022./23, COMMITTEE MEMBER
    Since 2022 (National)
  • IKM DIVISION OF POLYMERS AND MATERIALS CHEMISTRY FOR THE TERM 2021/2022, COMMITTEE MEMBER
    Since 2021 (National)
  • INSTITUT KIMIA MALAYSIA, ACTIVE MEMBER
    Since 2020 (National)
  • ACADEMY OF SCIENCES MALAYSIA (ASM), FELLOWSHIP MEMBER
    Since 2018 (National)
  • AKADEMI SAINS MALAYSIA, FELLOWSHIP
    Since 2018 (National)

AWARD AND STEWARDSHIP

  • Certificate of Merit
    MINDS, 2022 (National)
  • IKM Gold Medal 2019
    Instituit Kimia Malaya, 2019 (National)
  • Best Invention - Individual Category- Palm Oil-based Polyester Emulsion for Paper Coating
    30th International Inventions, Innovations & Technology Exhibition 2019, Malaysia Innvention and Design Society, 2019 (National)
  • ITEX 2019 Gold Medal
    30th International Invention, Innovation & Technology Exhibition 2019, Malaysian Invention and Design Society, 2019 (National)
  • ASM Fellows' Lecture
    ASM, 2018 (National)
  • Esteemed member of the panel of judges, ITEX2015
    MINDS, 2016 (International)
  • UM EXCELLENCE AWARD
    NAIB CANSELOR, 2014 (University)
  • Science & Technology Research Grant 2014 on research project : Synthesis,cytotoxic and stability evaluation of nanostructured alkyds as advanced biomaterials for biomedical and pharmaceutical applications - A joint project with Teo Siew Yong and Lee Siang Yin of IMU.
    Malaysia Toray Science Foundation, 2014 (National)
  • University of Malaya Excellence Award 2014 - Category: Consultancy
    University of Malaya, 2014 (University)
  • Completion of R&D project: Microencapsulation process for the development of crack resistant dental composites (Dana Sciencefund RMKE-9
    Kementerian Sains Teknologi Dan Inovasi, 2012 (National)
  • 27.Gold Medal, 21st International Invention, Inovation, Industrial Design & Technology Exhibition ITEX2010, 14-16 May 2010, KLCC, Microcapsules for Self-healing Dental Material, Inventors: Gan Seng Neon, Noor Hayaty Abu Kasim and Sonja Then.
    MOSTI & MINDS, 2010 (International)
  • Gold Medal for "Environmental friendly palm oil- based toner resin for laserjet printers and photocopy machines", ITEX09, 20th International Invention, Innovation & Technology Exhibition - Best Invention Universities Category
    Malaysian Invention and Design Society, 2009 (International)
  • Silver Medal: Noor Hayaty Binti Abu Kasim, Gan Seng Neon,Fadhel Ali Abdulleh Alsanabani,Zamri Bin Radzi,Noor Azlin Bt Yahya,Nor Himazian Binti Mohamed, A novel polymer for application in restorative dentistry, Health and Allied Sciences
    Malaysia Technology Expo 2009 (MTE), PWTC, 19-21 Feb 2009, 2009 (National)
  • Gold Medal: Noor Hayaty Binti Abu Kasim, Gan Seng Neon,Fadhel Ali Abdulleh Alsanabani,Zamri Bin Radzi,Noor Azlin Bt Yahya,Nor Himazian Binti Mohamed, A novel polymer for application in restorative dentistry, Health and Allied Sciences
    EKSPO PENYELIDIKAN, REKACIPTA & INOVASI UM 2009, 13-15 Jan, 2009, 2009 (International)
  • Gold Medal, Therapeutic Category, [ Development of Polyurethane Oligomer Derived from Palm Oil Polyol for Application in Restorative Dentistry], Noor Hayati Abu Kasim, Gan Seng Neon, Fadhel Alsanabani, Zambri Radzi, Noor Azlin Yahya, Shamsul Muhamad and Nor Himazian Mohammed.
    INPEX 2008, June 11-14, 2008, Pittsburgh, PA USA, 2008 (International)
  • Silver Medal, [Development of Polyurethane Oligomer Derived from Palm Oil Polyol for Application in Restorative Dentistry], Gan Seng Neon, Noor Hayaty Abu Kasim, Fadhel Alsanabani, Zamri Radzi, Noor Azlin Yahya, Nor Himazian Mohammed, Rohana Ahmed
    Malaysia Technology Expo, MTE 2008, 21-22 Feb 2008, PWTC, Kuala Lumpur, 2008 (National)
  • CERTIFICATE OF EXCELLENT SERVICE
    University of Malaya, 2006 (University)
  • Special award for Innovation Product at ITEX2006
    ITEX 2006, 2006 (International)
  • Gold Medal - Converting palm oil into adhesives.
    17th International Invention, Inovation, Industrial Design & Technology Exhibition (ITEX 2006) held from 19 - 21 May 2006 at The KL Convention Centre, 2006 (International)
  • Special award, Converting palm oil into adhesives
    Korean Invention Promotion Association at ITEX 2006, 2006 (International)
  • Silver Medal, Polyurethane Adhesives from Palm Oil
    Malaysia Technology Expo 2006, 23-25 February 2006, PWTC, KL, 2006 (National)
  • Silver Medal- PHA-Materiel utilise dans la stabilisation d une fracture maxillo faciale, Siar CH, Lian CB, Gan SN, Tan IKP, Ong ST, and Chan C.]
    Geneva International Exhibition of Invention, 2005, 2005 (International)
  • Silver Medal,Flexible Polyurethane Foams from Palm Kernel Oil, Gan Seng Neon & Ling Kong Teng
    IPTA R&D Expo 2005, 30 Sept 2 Oct, PWTC,, 2005 (National)
  • Pemenang Saguhati Anugerah Harta Intelek Negara 2006,MyIPO/T-274/1/1/24-4-06 Paten difailkan dalam 2005.
    Kementerian Perdagan Dalam Negeri dan Hal Ehwal Pengguna,, 2005 (National)
  • Silver Medal, Production of Bacterial Polyhydroxyalkanoates, a Biodegradable and Biocompatible Plastics Material, from Palm Oil and Fatty Acids,Irene Tan Kit Ping, Gan Seng Neon, K.B.Ramachandran, Siar Chong Huat, Ong Siew Tin and Mohd Suffian Mohd Annuar.
    IPTA R&D Expo 2005, 30 Sept 2 Oct, PWTC, 2005 (National)
  • Sijil Penghargaan Saintis Cemerlang
    Kementerian Pengajian Tinggi, 24-8-2005, 2005 (National)
  • Gold Medal, Mousses de polyurethane flexibles a base dhuile de palme, pour utilisation dans des sofas et les sieges de vehicules
    Geneva International Exhibition of Invention, 2005, 2005 (International)
  • Gold Medal - Fire Resistance Roofing Materials from Local Plant Fibres : Gan Seng Neon, Muhammad Zakaria and Lee Sook Chin
    IPTA R&D Expo 2005, 30 Sept 2 Oct, PWTC, 2005 (National)
  • Gold Medal, Fire Resistance Roofing Materials from Local Plant Fibres:Gan Seng Neon, Muhamad Zakaria, Lee Sook Chin, Azlina Puang and Ling Kong Teng.
    Ekspo Penyelidikan, Rekacipta dan Inovasi 2005, 14-17 June 2005,Universiti Malaya, 2005 (University)
  • Gold Medal, Making flexible polyurethane foams from palm oil based polyols
    ITEX 2004, 20-22 May 2004, 2004 (International)
  • Gold Medal under the Invention/Innovation category, PHA for construction of plates and screws in rigid maxillofacial fracture fixation Biocompatibility studies: C.H.Siar, C.B.Lian, S.T.Ong, S.N.Gan, I.Tan and C.Chan
    S&T 2004 PWTC 26-28 Aug, 2004 (National)
  • Bronze Medal, Making palm fiber boards using water based thermoset acrylic binder
    Invention and Design Competition, ITEX (2000), 27-30 September 2000, 2000 (International)
  • EXCELLENCE SERVICE AWARD
    University of Malaya, 1988 (University)

PUBLICATIONS

Article in Journal
WoS
  1. Gi, Chareeya, I; Gan, Seng Neon; Ang, Desmond Teck-Chye (2024). Designing polymeric coating with low coefficient of friction for natural rubber glove application, JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY. 132, 496-506. doi:10.1016/j.jiec.2023.11.043
  2. Gi, Chareeya, I; Gan, Seng Neon; Ang, Desmond Teck-Chye (2024). Polymeric coating with low surface friction for natural rubber substrate, PROGRESS IN ORGANIC COATINGS. 189. doi:10.1016/j.porgcoat.2024.108281
  3. Heng, Yi Xin; Ling, Yvonne Tze Qzian; Chan, Hong Hao; Too, Wei Kang; Lee, Siang Yin; Koh, Rhun Yian; Liew, Yun Khoo; Ang, Desmond Teck Chye; Gan, Seng Neon (2024). Polymeric surfactants synthesised from palm-based oleic acid as potential biocompatible agents in natural rubber latex compounding, JOURNAL OF RUBBER RESEARCH. 27(2), 201-214. doi:10.1007/s42464-024-00260-8
  4. Adamu, Abbas Ahmad; Muhamad Sarih, Norazilawati; Gan, Seng Neon (2022). Polyurethane resin derived from polyol of palm olein and recycled poly(ethylene terephthalate), PIGMENT & RESIN TECHNOLOGY. . doi:10.1108/PRT-06-2020-0056
  5. Hussin, Hazira; Gan, Seng-Neon; Phang, Sook-Wai (2022). Effect of functional groups in the PAni-cellulose derivatives-based sensor in hydrazine detection, POLYMER BULLETIN. . doi:10.1007/s00289-021-03589-x
  6. Adamu, A. A., Sarih, N. M., & Gan, S. N. (2021). Thermal and anticorrosion properties of polyurethane coatings derived from recycled polyethylene terephthalate and palm olein-based polyols. Royal Society Open Science, 8(4), 12. doi: 10.1098/rsos.201087
  7. Heng, Y. X., Ling, Y. T. Q., Lee, S. Y., Ang, D. T. C., & Gan, S. N. (2021). Natural rubber latex film in the presence of renewable vegetable oil nanoemulsion. Polymer Bulletin, 78(4), 2103-2120. doi: 10.1007/s00289-020-03201-8
  8. Hussin, H., Gan, S. N., & Phang, S. W. (2021). Development of water-based polyaniline sensor for hydrazine detection. Sensors and Actuators a-Physical, 317, 9. doi: 10.1016/j.sna.2020.112460
  9. Ling, Y. T. Q., Yap, Y. J., Heng, Y. X., Lee, S. Y., Koh, R. Y., Ang, D. T. C., . . . Gan, S. N. (2021). Physiochemical and in vitro Cytotoxicity Properties of Biocompatible Palm Fatty Acid-Based Polyesters. Sains Malaysiana, 50(2), 395-407. doi: 10.17576/jsm-2021-5002-11
  10. Ramli, M. F., Lim, W. H., Ishak, I., Su'ait, M. S., Gan, S. N., & Phang, S. W. (2021). Adhesion improvement of polyaniline counter electrode in dye-sensitized solar cell using bio-based alkyd. Applied Physics a-Materials Science & Processing, 127(5), 9. doi: 10.1007/s00339-021-04497-7
  11. Ataei, S., Yahya, R., Hassan, A., Gan, S. N., Khorasani, S. N., & Ramezanpour, J. (2020). Improved properties of coating binder from palm oil-based oleic acid by copolymerizing with acrylate monomers. Journal of Coatings Technology and Research, 17(4), 1013-1022. doi: 10.1007/s11998-020-00321-8
  12. Teo, K. T., Hassan, A., & Gan, S. N. (2020). Effects of different dicarboxylic acid on the UV-curable urethane resins made from palm fatty acid distillate. Journal of Coatings Technology and Research, 17(6), 1571-1585. doi: 10.1007/s11998-020-00379-4
  13. Abu Bakar, R., Yahya, R., Gan, S. N. (2019). COMPARISON BETWEEN RICE HUSK SILICA-FILLED EPOXIDIZED NR CROSS-LINKED WITH FUMARIC ACID AND VULCANIZED WITH SULFUR. Rubber Chemistry and Technology, 92(2), 286-297. doi:10.5254/rct.18.81554
  14. Khaw, Y. Y., Chee, C. Y., Gan, S. N., Singh, R., Ghazali, N. N. N., Liu, N. S. (2019). Poly(lactic acid) composite films reinforced with microcrystalline cellulose and keratin from chicken feather fiber in 1-butyl-3-methylimidazolium chloride. Journal of Applied Polymer Science, 136(24), 10. doi:10.1002/app.47642
  15. Qamar, Z., Rahim, Z., Neon, G. S., Chew, H. P., Zeeshan, T. (2019). Effectiveness of poly-gamma-glutamic acid in maintaining enamel integrity. Archives of Oral Biology, 106, 8. doi:10.1016/j.archoralbio.2019.104482
  16. Saman, N. M., Ang, D. T. C., Gan, S. N. (2019). Acrylated Epoxidized Soybean Oil as a Green Alternative Healant in Development of Autonomous Self-Healing Materials. Journal of Polymers and the Environment, 27(1), 118-126. doi:10.1007/s10924-018-1328-y
  17. Saman, N. M., Ang, D. T. C., Shahabudin, N., Gan, S. N., Basirun, W. J. (2019). UV-curable alkyd coating with self-healing ability. Journal of Coatings Technology and Research, 16(2), 465-476. doi:10.1007/s11998-018-0124-x
  18. Ahad, I. Z. M., Harun, S. W., Gan, S. N., Phang, S. W. (2018). Polyaniline (PAni) optical sensor in chloroform detection. Sensors and Actuators B-Chemical, 261, 97-105. doi:10.1016/j.snb.2018.01.087
  19. Azari, P., Luan, N. S., Gan, S. N., Yahya, R., Wong, C. S., Chua, K. H., Pingguan-Murphy, B. (2015). Electrospun Biopolyesters as Drug Screening Platforms for Corneal Keratocytes. International Journal of Polymeric Materials and Polymeric Biomaterials, 64(15), 785-791.
  20. Ang, Desmond Teck Chye; Khong, Yoke Kum; Gan, Seng Neon (2013). Novel approach to enhance film properties of environmentally friendly UV-curable alkyd coating using epoxidised natural rubber, Progress in Organic Coatings. 76(4), 705-711. doi:10.1016/j.porgcoat.2012.12.013
  21. Azimi, A. R. N.; Yahya, Rosiyah; Gan, Seng-Neon (2013). Improving coating characteristics of palm stearin alkyd by modification with ketone resin, PROGRESS IN ORGANIC COATINGS. 76(4), 712-719. doi:10.1016/j.porgcoat.2013.01.001
  22. Kawata, K., Gan, S. N., Ang, D. T. C., Sambasevam, K. P., Phang, S. W., Kuramoto, N. (2013). Preparation of Polyaniline/TiO2 Nanocomposite Film with Good Adhesion Behavior for Dye-Sensitized Solar Cell Application, Polymer Composites. 34(11), 1884-1891
  23. Khong, Yoke Kum; Gan, Seng Neon (2013). Blends of phthalic anhydride-modified palm stearin alkyds with high carboxylic acid contents with epoxidized natural rubber, JOURNAL OF APPLIED POLYMER SCIENCE. 130(1), 153-160. doi:10.1002/app.39135
  24. Lee, S. Y.; Gan, S. N. (2013). The adhesion properties of natural rubber pressure-sensitive adhesives using palm kernel oil-based alkyd resins as a tackifier, COMPOSITE INTERFACES. 20(3), 177-188. doi:10.1080/15685543.2013.763515
  25. Nanvaee, Alireza Azimi; Yahya, Rosiyah; Gan, Seng-Neon (2013). Cleaner production through using by-product palm stearin to synthesis alkyd resin for coating applications, JOURNAL OF CLEANER PRODUCTION. 54, 307-314. doi:10.1016/j.jclepro.2013.04.027
  26. Sin, Mei Chan; Tan, Irene Kit Ping; Annuar, Mohd Suffian Mohd; Gan, Seng Neon (2013). Kinetics of thermodegradation of palm kernel oil derived medium-chain-length polyhydroxyalkanoates, JOURNAL OF APPLIED POLYMER SCIENCE. 127(6), 4422-4425. doi:10.1002/app.38033
  27. Velayutham, T. S.; Abd Majid, W. H.; Ng, B. K.; Gan, S. N. (2013). Effect of oleic acid content and chemical crosslinking on the properties of palm oil-based polyurethane coatings, JOURNAL OF APPLIED POLYMER SCIENCE. 129(1), 415-421. doi:10.1002/app.38768
  28. Ang, Desmond Teck Chye; Gan, Seng Neon (2012). Development of palm oil-based alkyds as UV curable coatings, PIGMENT & RESIN TECHNOLOGY. 41(5), 302-310. doi:10.1108/03699421211264866
  29. Ang, Desmond Teck Chye; Gan, Seng Neon (2012). Environment friendly UV-curable resins from palm stearin alkyds, JOURNAL OF APPLIED POLYMER SCIENCE. 125, E306-E313. doi:10.1002/app.36858
  30. Ang, Desmond Teck Chye; Gan, Seng Neon (2012). Novel approach to convert non-self drying palm stearin alkyds into environmental friendly UV curable resins, PROGRESS IN ORGANIC COATINGS. 73(4), 409-414
  31. Ataei, S.; Yahya, R.; Gan, S. N. (2012). Coating performances of copolymers from a novel palm oil-based macromer and methyl methacrylate, PIGMENT & RESIN TECHNOLOGY. 41(2), 112-121. doi:10.1108/03699421211210775
  32. Ataei, Shahla; Yahya, Rosiyah; Gan, Seng Neon; Hassan, Aziz (2012). Study of Thermal Decomposition Kinetics of Palm Oleic Acid-Based Alkyds and Effect of Oil Length on Thermal Stability, JOURNAL OF POLYMERS AND THE ENVIRONMENT. 20(2), 507-513. doi:10.1007/s10924-011-0403-4
  33. Sin, Mei Chan; Tan, Irene Kit Ping; Annuar, Mohd Suffian Mohd; Gan, Seng Neon (2012). Thermal behaviour and thermodegradation kinetics of poly(vinyl chloride) plasticized with polymeric and oligomeric medium-chain-length poly(3-hydroxyalkanoates), POLYMER DEGRADATION AND STABILITY. 97(11), 2118-2127. doi:10.1016/j.polymdegradstab.2012.08.020
  34. Velayutham, T. S.; Abd Majid, W. H.; Gan, W. C.; Zak, A. Khorsand; Gan, S. N. (2012). Theoretical and experimental approach on dielectric properties of ZnO nanoparticles and polyurethane/ZnO nanocomposites, JOURNAL OF APPLIED PHYSICS. 112(5). doi:10.1063/1.4749414
  35. Ataei, S., Yahya, R., Gan, S. N. (2011). Effect of methyl methacrylate content on coatings properties of palm oleic acid-based macromer, Journal of Coatings Technology and Research. 86(719-725), Article
  36. Ataei, Shahla; Yahya, Rosiyah; Gan, Seng Neon (2011). Effect of methyl methacrylate content on coatings' properties of palm oleic acid-based macromer, JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH. 8(6), 719-725. doi:10.1007/s11998-011-9363-9
  37. Ataei, Shahla; Yahya, Rosiyah; Gan, Seng Neon (2011). Fast physical drying, high water and salt resistant coatings from non-drying vegetable oil, PROGRESS IN ORGANIC COATINGS. 72(4), 703-708. doi:10.1016/j.porgcoat.2011.07.013
  38. Ataei, Shahla; Yahya, Rosiyah; Gan, Seng Neon (2011). Palm Oleic Acid Based Alkyds: Effect of the Fatty Acid Content on the Polyesterification Kinetics, JOURNAL OF POLYMERS AND THE ENVIRONMENT. 19(2), 540-545. doi:10.1007/s10924-011-0303-7
  39. Lee, Siang Yin; Gan, Seng Neon; Hassan, Aziz; Terakawa, Katsumi; Hattori, Takayuki; Ichikawa, Naoya; Choong, Dick Hong (2011). Reactions Between Epoxidized Natural Rubber and Palm Oil-Based Alkyds at Ambient Temperature, JOURNAL OF APPLIED POLYMER SCIENCE. 120(3), 1503-1509. doi:10.1002/app.33290
  40. Sin, Mei Chan; Gan, Seng Neon; Annuar, Mohd Suffian Mohd; Tan, Irene Kit Ping (2011). Chain cleavage mechanism of palm kernel oil derived medium-chain-length poly(3-hydroxyalkanoates) during high temperature decomposition, POLYMER DEGRADATION AND STABILITY. 96(9), 1705-1710. doi:10.1016/j.polymdegradstab.2011.06.004
  41. Sin, Mei Chan; Tan, Irene Kit Ping; Annuar, Mohd Suffian Mohd; Gan, Seng Neon (2011). CHARACTERIZATION OF OLIGOMERIC HYDROXYALKANOIC ACIDS FROM THERMAL DECOMPOSITION OF PALM KERNEL OIL-BASED BIOPOLYESTER, INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION. 16(5), 337-347. doi:10.1080/1023666X.2011.588306
  42. Velayutham, T. S.; Majid, W. H. Abd; Gan, S. N. (2011). Electrical Behavior of Polyurethane Derived from Polyols Synthesized with Glycerol, Phthalic Anhydride, and Oleic Acid, JOURNAL OF APPLIED POLYMER SCIENCE. 121(3), 1796-1803. doi:10.1002/app.33468
  43. Wong, J. H. D., Hardcastle, N., Tome, W. A., Bayliss, A., Tolakanahalli, R., Lerch, M. L. F., et al. (2011). Independent quality assurance of a helical tomotherapy machine using the dose magnifying glass, Medical Physics. 384(2256-2264), Article
  44. Wong, J. X.; Gan, S. N.; Aishah, M. J. (2011). Chromium(III) Based Ziegler-Natta Catalysts for Olefin Polymerization, SAINS MALAYSIANA. 40(7), 771-779
  45. Lee, Siang Yin; Hassan, Aziz; Tan, Irene K. P.; Terakawa, Katsumi; Ichikawa, Naoya; Gan, Seng Neon (2010). Reactions of Palm Oil-Based mcl-PHAs with Epoxidized Natural Rubber, JOURNAL OF APPLIED POLYMER SCIENCE. 115(4), 2039-2043. doi:10.1002/app.31236
  46. Sim, L. H.; Gan, S. N.; Chan, C. H.; Yahya, R. (2010). ATR-FTIR studies on ion interaction of lithium perchlorate in polyacrylate/poly(ethylene oxide) blends, SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY. 76(3-4), 287-292. doi:10.1016/j.saa.2009.09.031
  47. Sin, M. C., Gan, S. N., Annuar, M. S. M., Tan, I. K. P. (2010). Thermodegradation of medium-chain-length poly(3-hydroxyalkanoates) produced by Pseudomonas putida from oleic acid, Polymer Degradation and Stability. 95(12), 2334-2342
  48. Chee, Swee Yong; Gan, Seng Neon (2009). Swelling Properties of Copolymers of Styrene and Divinylbenzene Containing Sulfonic and Carboxylic Acid Groups, JOURNAL OF APPLIED POLYMER SCIENCE. 111(3), 1185-1189. doi:10.1002/app.28991
  49. Sim, L. H., Gan, S. N., Chan, C. H., Kammer, H. W., Yahya, R. (2009). Compatibility and conductivity of LiClO4 free and doped polyacrylate-poly(ethyleneoxide) blends, Materials Research Innovations. 13(3), 278-281
  50. Velayutham, T. S.; Majid, W. H. Abd; Ahmad, A. B.; Gan, Yik Kang; Gan, Seng Neon (2009). The Physical and Mechanical Properties of Polyurethanes from Oleic Acid Polyols, JOURNAL OF APPLIED POLYMER SCIENCE. 112(6), 3554-3559. doi:10.1002/app.29758
  51. Velayutham, T. S.; Majid, W. H. Abd; Ahmad, A. B.; Kang, Gan Yik; Gan, S. N. (2009). Synthesis and characterization of polyurethane coatings derived from polyols synthesized with glycerol, phthalic anhydride and oleic acid, PROGRESS IN ORGANIC COATINGS. 66(4), 367-371. doi:10.1016/j.porgcoat.2009.08.013
  52. Maah, M. J., Abdullah, C. I., Gan, S. N., Jelan, A. M., Ng, S. W. (2008). Hexa-mu(2)-acetato-kappa O-12 : O '-mu(3)-oxido-tris[aquachromium(III)] nitrate acetic acid solvate, Acta Crystallographica Section E-Structure Reports Online. 64, M1310-U2860
  53. Soume, B., Yahya, R., Gan, S. N., Ng, S. W. (2008). Diaqua-mu(3)-oxido-hexakis(mu(2)-trichloro-acetato-kappa O-2 : O ')(trichloroacetato-kappa O)-trichromium(III) acetonitrile trisolvate, Acta Crystallographica Section E-Structure Reports Online. 64, M1175-U1661
  54. Chee, SY; Gan, SN (2006). Ultraviolet curable dry polymer films from emulsion polymers, JOURNAL OF APPLIED POLYMER SCIENCE. 100(3), 2317-2322. doi:10.1002/app.22931
  55. Lim, SP; Gan, SN; Tan, IKP (2005). Degradation of medium-chain-length polyhydroxyalkanoates in tropical forest and mangrove soils, APPLIED BIOCHEMISTRY AND BIOTECHNOLOGY. 126(1), 23-33
  56. Vivaygananthan, K; Lai, PF; Gan, SN; Fellows, CM; Gilbert, RG (2005). A method for preparing low-allergen natural rubber latex, AUSTRALIAN JOURNAL OF CHEMISTRY. 58(6), 461-467. doi:10.1071/CH05060
  57. Leong, YC; Lee, LMS; Gan, SN (2003). The viscoelastic properties of natural rubber pressure-sensitive adhesive using acrylic resin as a tackifier, JOURNAL OF APPLIED POLYMER SCIENCE. 88(8), 2118-2123. doi:10.1002/app.11843
  58. Ho, YH; Gan, SN; Tan, IKP (2002). Biodegradation of a medium-chain-length polyhydroxyalkanoate in tropical river water, APPLIED BIOCHEMISTRY AND BIOTECHNOLOGY. 102, 337-347
  59. Gan, SN; Tan, BY (2001). FTIR studies of the curing reactions of palm oil alkyd-melamime enamels, JOURNAL OF APPLIED POLYMER SCIENCE. 80(12), 2309-2315
  60. Chuah, K. P., Gan, S. N., Chee, K. K. (1999). Determination of Avrami exponent by differential scanning calorimetry for non-isothermal crystallization of polymers, Polymer. 40(1), 253-259
  61. Gan, S. N., Teo, K. T. (1999). Effects of composition variations and curing conditions on the gloss of water reducible clear coatings prepared from palm stearin alkyds, Jocca-Surface Coatings International. 82(1), 31-+
  62. Gan, S. N., Hamid, Z. A. (1997). Partial conversion of epoxide groups to diols in epoxidized natural rubber, Polymer. 38(8), 1953-1956
  63. Redzwan, G., Gan, S. N., Tan, I. K. P. (1997). Isolation of polyhydroxyalkanoate-producing bacteria from an integrated-farming pond and palm-oil mill effluent ponds, World Journal of Microbiology Biotechnology. 13(6), 707-709
  64. Tan, I. K. P., Kumar, K. S., Theanmalar, M., Gan, S. N., Gordon, B. (1997). Saponified palm kernel oil and its major free fatty acids as carbon substrates for the production of polyhydroxyalkanoates in Pseudomonas putida PGA1, Applied Microbiology and Biotechnology. 47(3), 207-211
  65. Gan, S. N. (1996). Storage hardening of natural rubber, Journal of Macromolecular Science-Pure and Applied Chemistry. A33(12), 1939-1948
  66. Gan, S. N., Subramaniam, N., Yahya, R. (1996). Hydrogenation of natural rubber using nickel 2-ethylhexanoate catalyst in combination with triisobutylaluminum, Journal of Applied Polymer Science. 59(1), 63-70
  67. Gan, S. N., Loi, P. S. T., Ng, S. C., Burfield, D. R. (1994). ACTIVE-CENTER DETERMINATION IN ZIEGLER-NATTA POLYMERIZATION - AN INNOVATIVE DUAL-LABELING APPROACH, . 89, 91-100
  68. Gan, S. N., Ting, K. F. (1993). EFFECT OF TREATING LATEX WITH SOME METAL-IONS ON STORAGE HARDENING OF NATURAL-RUBBER, Polymer. 34(10), 2142-2147
  69. Lim, M. C., Chen, W., Gan, S. N., Jelan, A. M., Butcher, R. J. (1993). CRYSTAL-STRUCTURE OF TRINUCLEAR TRANS-MU-3-OXO-TRIS(BISCHLOROACETATOAQUOCHROMIUM(III))CHLOROACETATE DIHYDRATE, CR3O(CLCH2COO)63H2O CLCH2COO.2H2O, Journal of Crystallographic and Spectroscopic Research. 23(1), 13-18
  70. Gan, S. N., Burfield, D. R. (1989). DSC STUDIES OF THE REACTION BETWEEN EPOXIDIZED NATURAL-RUBBER AND BENZOIC-ACID, Polymer. 30(10), 1903-1908
  71. Gan, S. N., Lim, M. C., Chen, S. I., Soga, K. (1987). MODIFIED CHROMIUM(III) ACETATE USED IN THE POLYMERIZATION OF ALPHA-OLEFINS, Journal of Catalysis. 105(1), 249-253
  72. Gan, S. N., Burfield, D. R., Soga, K. (1985). DIFFERENTIAL SCANNING CALORIMETRY STUDIES OF ETHYLENE PROPYLENE COPOLYMERS, Macromolecules. 18(12), 2684-2688
Scopus
  1. I Gi C., Gan S.N., Ang D.T.-C. (2024). Polymeric coating with low surface friction for natural rubber substrate, Progress in Organic Coatings. 189. doi:10.1016/j.porgcoat.2024.108281
  2. Wong K.Y., Chia M.R., Teh G.B., Phang S.-W., Gan S.N., Sin S.L. (2024). Effect of Halloysite Nanoclay on the Properties of Castor Oil Based Polyurethane Synthesized by Microwave-Assisted Method, Materials Performance and Characterization. 13(1), 201-214. doi:10.1520/MPC20230123
  3. Gan S.N. (2023). Development of Environmentally Friendly Palm Oil-Based Resins for Coating Applications, Malaysian Journal of Chemistry. 25(3), 244-250
  4. I Gi C., Gan S.N., Ang D.T.-C. (2023). Designing polymeric coating with low coefficient of friction for natural rubber glove application, Journal of Industrial and Engineering Chemistry. . doi:10.1016/j.jiec.2023.11.043
  5. Chan Sin, M., Gan, S. N., Mohd Annuar, M. S., Ping Tan, I. K. (2010). Thermodegradation of medium-chain-length poly(3-hydroxyalkanoates) produced by Pseudomonas putida from oleic acid, Polymer Degradation and Stability. 95(12), 2334-234201413910
  6. Lee, S. Y., Hassan, A., Tan, I. K. P., Terakawa, K., Ichikawa, N., Gan, S. N. (2010). Reactions of palm oil-based mcl-PHAs with epoxidized natural rubber, Journal of Applied Polymer Science. 115(4), 2039-204300218995
  7. Sim, L. H., Gan, S. N., Chan, C. H., Yahya, R. (2010). ATR-FTIR studies on ion interaction of lithium perchlorate in polyacrylate/poly(ethylene oxide) blends, Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy. 76(3-4), 287-29213861425
  8. Chee, S. Y., Gan, S. N. (2009). Swelling properties of copolymers of styrene and divinylbenzene containing sulfonic and carboxylic acid groups, Journal of Applied Polymer Science. 111(3), 1185-1189
  9. Velayutham, T. S., Abd. Majid, W. H., Ahmad, A. B., Gam, Y. K., Gan, S. N. (2009). The physical and mechanical properties of polyurethanes from oleic acid polyols, Journal of Applied Polymer Science. 112(6), 3554-3559
  10. Velayutham, T. S., Majid, W. H. A., Ahmad, A. B., Kang, G. Y., Gan, S. N. (2009). Synthesis and characterization of polyurethane coatings derived from polyols synthesized with glycerol, phthalic anhydride and oleic acid, Progress in Organic Coatings. 66(4), 367-371
  11. Maah, M. J., Abdullah, C. I., Gan, S. N., Mohd Jelan, A., Ng, S. W. (2008). Hexa- 2-acetato- 12 O:O - 3-oxido-tris-[aqua-chromium(III)] nitrate acetic acid solvate, Acta Crystallographica Section E: Structure Reports Online. 64(10), Article
  12. Soume, B. B. M. D., Yahya, R., Gan, S. N., Ng, S. W. (2008). Diaqua- 3-oxido-hexa-kis( 2-trichloro-acetato- 2 O:O )(trichloro-acetato- O)trichromium(III) acetonitrile tris-olvate, Acta Crystallographica Section E: Structure Reports Online. 64(9), Article
  13. Chee, S. Y., Gan, S. N. (2006). Ultraviolet curable dry polymer films from emulsion polymers, Journal of Applied Polymer Science. 100(3), 2317-2322
  14. Lim, S. P., Gan, S. N., Tan, I. K. P. (2005). Degradation of medium-chain-length polyhydroxyalkanoates in tropical forest and mangrove soils, Applied Biochemistry and Biotechnology. 126(1), 23-33
  15. Leong, Y. C., Lee, L. M. S., Gan, S. N. (2003). The viscoelastic properties of natural rubber pressure-sensitive adhesive using acrylic resin as a tackifier, Journal of Applied Polymer Science. 88(8), 2118-2123
  16. Gan, S. N., Tan, B. Y. (2001). FTIR studies of the curing reactions of palm oil alkyd-melamine enamels, Journal of Applied Polymer Science. 80(12), 2309-2315
Others
  1. Adamu, A.A., Muhamad Sarih, N. and Gan, S.N. (2021),"Polyurethane resin derived from polyol of palm olein and recycled poly(ethylene terephthalate)", Pigment & Resin Technology, Vol. ahead-of-print No. https://doi.org/10.1108/PRT-062020-0056
  2. H Hussin, SN Gan, SW Phang (2021), Effect of functional groups in the PAni-cellulose derivatives-based sensor in hydrazine detection. Polymer Bulletin, 2021
  3. MF Ramli, WH Lim, I Ishak, MS Su ait, SN Gan, SW Phang (2021). Adhesion improvement of polyaniline counter electrode in dye-sensitized solar cell using bio-based alkyd. Applied Physics A 127 (5), 1-9
  4. Shahla Ataei, Rosiyah Yahya, Aziz Hassan, Seng Neon Gan, Saied Nouri Khorasani, Javad Ramezanpour.(2020). Improved properties of coating binder from palm oil-based oleic acid by copolymerizing with acrylate monomers. J. Coat. Technol. Res.1-10.
  5. YX Heng, YTQ Ling, SY Lee, DTC Ang, SN Gan (2020). Natural rubber latex film in the presence of renewable vegetable oil nanoemulsion, POLYMER BULLETIN, online, May
  6. NM Saman, DTC Ang, SN Gan.(2019). Acrylated Epoxidized Soybean Oil as a Green Alternative Healant in Development of Autonomous Self-Healing Materials. Journal of Polymers and the Environment 27 (1), 118-126
  7. SN Gan, N Shahabudin.2019. Applications of Microcapsules in Self-Healing Polymeric Materials. Book Chapter, in "Microencapsulation-Processes, Technologies and Industrial Applications",
  8. Ying Ying Khaw, Ching Yer n Chee, Seng Neon Gan , Ram esh Singh , Nik Nazr i Nik Ghazali , Nan Shang Liu (2019), Poly(lactic acid) composite films reinforced with microcrystalline cellulose and keratin from chicken feather fiber in 1-butyl-3-methylimidazolium chloride. Journal of Applied Polymer Science 136 (24), 47642
  9. Zeeshan Qamar,, Zubaidah Binti Haji Abdul Rahim, Gan Seng Neon, Tayyaba Zeeshan, Hooi Pin Chew.(2019), E ectiveness of poly- -glutamic acid in maintaining enamel integrity, Archives of Oral Biology 106, 104482
  10. Jasbir Singh Kunnan Singh, Yern Chee Ching, Luqman Chuah Abdullah, Kuan Yong Ching, Shaifulazuar Razali and Seng Neon Gan (2018), Optimization of Mechanical Properties for Polyoxymethylene/Glass Fiber/Polytetra uoroethylene composites Using Response Surface Methodology, Polymers, 10, p 338; doi:10.3390/polym10030338
  11. Kim Teck Teo, Aziz Hassan and Seng Neon Gan *(2018), UV-Curable Urethane Acrylate Resin from Palm Fatty Acid Distillate, Polymers 2018, 10, 1374; doi:10.3390/polym10121374
  12. Pejvak Rooshenass,Rosiyah Yahya, Seng Neon Gan (2018). Preparation of Liquid Epoxidized Natural Rubber by Oxidative Degradations Using Periodic Acid, Potassium Permanganate and UV-Irradiation. Journal of Polymers and the Environment, Volume 26, Issue 4, pp 1378 1392
  13. Sho Fujisawa, Masumi Yamamoto,, Daiki Kashiwai, Pedram Azari, Ying Ying Khaw, Seng Neon Gan, and Shigeru akahara (2018),Formation Behavior of Polyiodine Complex in Photocrosslinked Polyvinyl Alcohol Fiber Spun by Electrospinning Method, Journal of Photopolymer Science and Technology, 31,4,p569-574,
  14. Faridah M.M. Akram, Chin Han Chan, Yoga Sugama Salim, Seng Neon Gan, K. Sudesh Kumar (2017). Studies on Non-Isothermal Crystallisation and Viscoelastic Properties of Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) and Epoxidized Natural Rubber Blends, Macromol. Symp. 371, 107 113
  15. Rozaki, N.Z., Gan, SN. & Ang, D.TC. (2017), Environmentally Friendly Oil-Modified Polyesters as Polymeric Plasticizers for Poly(vinyl chloride) . J Polym Environ 25: 286. doi:10.1007/s10924-016-0810-7
  16. SIEW YONG TEO, SIANG YIN LEE, MICHAEL J. RATHBONE, SENG NEON GAN5 (2017). POLYMERIC MATERIALS AS PLATFORMS FOR TOPICAL DRUG DELIVERY: A REVIEW, International Journal of Pharmacy and Pharmaceutical Sciences, Vol 9, Issue 1, p14-28
  17. Siew Yong Teo, Mei Yeng Yew, Siang Yin Lee, Michael J. Rathbone, Seng Neon Gan, Allan G.A. Coombes (2017). In Vitro Evaluation of Novel Phenytoin-Loaded Alkyd Nanoemulsions Designed for Application in Topical Wound Healing, Journal of Pharmaceutical Sciences 106, 377-384
  18. Bakar, R.A., Yahya, R., Gan, S.N. (2016) Cross-linking reactions of silica-filled epoxidized natural rubber with fumaric acid. Rubber Chemistry and Technology 89 (3), pp. 465-476
  19. Desmond Teck-Chye Ang, Yoke Kum Khong, Seng Neon Gan.(2016).Palm Oil-Based Compound as Environmentally Friendly Plasticizer for Poly(vinyl chloride), JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, DOI 10.1002/vnl
  20. Gan,S.N. 2016.Novel polymeric materials from palm oil derivatives , Asia Research News, April,11
  21. Nurshafiza Shahabudin, Rosiyah Yahya and Seng Neon Gan.(2016).Microcapsules Filled with a Palm Oil-Based Alkyd as Healing Agent for Epoxy Matrix. Polymers, 8, 125; doi:10.3390/polym8040125
  22. Nurshafiza Shahabudin, Rosiyah Yahya, Seng Neon Gan, 2016, Microencapsulation of a Palm Oil based Alkyd by Amino Resins, Materials Today: Proceedings 3S, p S88 S95
  23. Rohani Abu Bakar, Rosiyah Yahya, Seng Neon Gan, 2016, Production of High Purity Amorphous Silica from Rice Husk, Procedia Chemistry 19, 189 195
  24. Rozila, I., Azari, P., Munirah, S. b., Safwani, W., Zaman, W. K., Gan, S. N., . . . Pingguan Murphy, B. (2016). Differential osteogenic potential of human adipose derived stem cells co cultured with human osteoblasts on polymeric microfiber scaffolds. Journal of Biomedical Materials Research Part A, 104(2), 377-387.
  25. Salim, Y. S., Saiter, J.-M., Natarajan, V. D., Kumar, S., Neon Gan, S. and Han Chan, C.(2016).Evidence of Melt Reaction Between Poly(3-Hydroxybutyrate-co-3-Hydroxyhexanoate) and Epoxidized Natural Rubber as Investigated by DSC, Isothermal TGA and FTIR Analysis. Macromolecular Symposia, 365,1,81-86.
  26. Shahabudin, N., Yahya, R., Gan, S.N. (2016) Microcapsules of Poly(urea-formaldehyde) (PUF) Containing alkyd from Palm Oil. Materials Today: Proceedings 3, pp. S88-S95
  27. Siew Yong Teo, Mei Yeng Yew, Siang Yin Lee, Michael J. Rathbone, Seng Neon Gan, Allan G.A. Coombes. (2016), In Vitro Evaluation of Novel PhenytoinLoaded Alkyd Nanoemulsions Designed for Application in Topical Wound Healing. Pharmaceutical Nanotechnology, http://dx.doi.org/10.1016/j.xphs.2016.06.028
  28. Yeong Siang Chiam, Irma Zulayka Mohamad Ahada, Sulaiman Wadi Harunb, Seng Neon Gan, Sook Wai Phang, 2016, Effects of the Dopant Ratio on polyaniline Coated Fiber Bragg Grating for pH detection, Synthetic Metals, 211, p 132 141
  29. BK Tan, YC Ching, SC Poh, LC Abdullah, SN Gan, 2015, A Review of Natural Fiber Reinforced Poly (Vinyl Alcohol) Based Composites: Application and Opportunity, Polymers 7 (11), 2205-2222
  30. Boon Khoon Tan, Yern Chee Ching, Seng Neon Gan and Shaifulazuar Rozali,2015, Biogegradable mulches based on poly(vinyl alcohol), kenaf fiber and urea, BioResourxes, 10(3), p5532-5543
  31. Kar Min Lim, Yern Chee Ching, and Seng Neon Gan, 2015, Effect of Palm Oil Bio-Based Plasticizer on the Morphological, Thermal and Mechanical Properties of Poly(Vinyl Chloride),Polymers 2015, 7, 2031 2043
  32. Pedram Azari, Ng Sook Luan, Seng Neon Gan, Rosiyah Yahya, Chiow San Wong, Kien Hui Chuan and Belinda Pingguan Murphy, 2015, Electronspun biopolyesters as drug screening platforms for corneal keratocytes, International Journal of Polymeric Materials and polymeric biomaterials, 64:15, p785-791, DOI:10.1080/00914037.2015.1030648
  33. Pejvak Rooshenass, Rosiyah Yahya, Seng Neon Gan, 2015, COMPARISON OF THREE DIFFERENT DEGRADATION METHODS TO PRODUCE LIQUID EPOXIDIZED NATURAL RUBBER, Rubber Chemistry and Technology, published online, Sept 25.
  34. SIEW YONG TEO, SIANG YIN LEE, MICHAEL J. RATHBONE , ALLAN G. A. COOMBES, SENG NEON GAN, 2015, DEVELOPMENT AND VALIDATION OF A STABILITY-INDICATING ISOCRATIC REVERSE PHASE-LIQUID CHROMATOGRAPHY ASSAY FOR DETERMINATION OF PHENYTOIN IN BULK AND PHARMACEUTICAL FORMULATIONS, Int J Pharm Pharm Sci, Vol 7, Issue 8, 258-263
  35. Samira Hosseini,Pedram Azari, Elham Farahmand, S.N. Gan, Hussin A. Rothan,Rohana Yusof, Leo H. Koole,Ivan Djordjevic, Fatimah Ibrahim, 2015, Polymethacrylate coated electrospun PHB fibers: An exquisite outlook for fabrication of paper-based biosensors, Biosensors and Bioelectronics 69, 257 264
  36. Shahabudin N, Yahya R, Gan SN, 2015 Microencapsulation of a palm oil-based alkyd by amino resins Macromol. Symp. 354 (2015) 305-313
  37. Siew Yong Teo, Siang Yin Lee, Allan Coombes, Michael John Rathbone, Seng Neon Gan, 2015, Synthesis and characterization of novel biocompatible palm oil based alkyds, Eur. J. Lipid Sci. Technol. 2015, 117, Wiley Online Library
  38. Siew Yong Teo, Siang Yin Lee, Huey Lin Ong, Ching Lin Ong, and Seng Neon Gan, Michael J. Rathbone, Allan G. A. Coombes,2015, Evaluation of Biosourced Alkyd Nanoemulsions as Drug Carriers, Journal of Nanomaterials, Volume 2015, Article ID 537598, doi.org/10.1155/2015/537598
  39. Ang, D.T.C.; Khong, Y.K.; Gan, S.N.,2014,Palm oil‐based compound as environmentally friendly plasticizer for poly(vinyl chloride). Journal of Vinyl and Additive Technology, Wiley Online, 9 JUL 2014 DOI: 10.1002/vnl.21434
  40. Chapter 16: Thermal Properties of Poly(hydroxyalkanoates) Yoga Sugama Salim, Chin Han Chan, Kumar Sudesh, and Seng Neon Gan, in Physical Chemistry of Macromolecules:Macro to Nanoscales, Apple Academic Press, April 2014.
  41. Chapter 17: Replacing Petroleum-Based Tackifier in Tire Compounds with Environmental Friendly Palm Oil-Based Resins, Siang Yin Lee and Seng Neon Gan, in Physical Chemistry of Macromolecules: Macro to Nanoscales, Apple Academic Press, April 2014
  42. H. Akram,P. Azari, W. A. B. Wan Abas, N. M. Zain, S. N. Gan, R. Yahya, C.S.Wong, B. Pingguan-Murphy, 2014, An in-vitro study on the proliferative potential of rat bone marrow stem cells on electrospun fibrous polycaprolactone scaffolds containing micro- hydroxyapatite particles, Materials Research Innovations, VOL 18, S6-520
  43. ISOTHERMAL CRYSTALLISATION KINETICS OF MICROBIAL POLY(3- HYDROXYBUTYRATECO-3-HYDROXYHEXANOATE) YOGA SUGAMA SALIM, CHIN HAN CHAN, KUMAR SUDESH, SENG NEON GAN, 2014, International Journal of Pharmacy and Pharmaceutical Sciences,Vol 6, Suppl 3,ISSN- 0975-1491
  44. Mei Chan Sin, Irene Kit Ping Tan, Mohd Suffian Mohd Annuar, and Seng Neon Gan, Viscoelastic, Spectroscopic, and Microscopic Characterization of Novel Bio-Based Plasticized Poly(vinyl chloride) Compound,2014, International Journal of Polymer Science, vol. 2014, Article ID 846189, 10 pages, 2014. doi:10.1155/2014/846189
  45. P. Azari, R.Rosiyah, C.S.Wong, S.N.Gan, 2014, Improved processability of electrospun poly[(R)-3-hydroxybutyric acid] through blending with medium-chain length poly(3-hydroxyalkanoates) produced by Pseudomonas putida from oleic acid, Materials Research Innovations 2014, VOL 18 SUPPL 6 S6-347
  46. Replacing platinum in a dye-sensitized solar cell,Keisuke Kawata, Seng-Neon Gan, Desmond Teck-Chye Ang, Kavirajaa Pandian Sambasevam, Sook-Wai Phang, and Noriyuki Kuramoto,2014,Plastics Research Online,Society of Plastics Engineers
  47. Y.K.Khong, Desmond T.C.Ang, S.N.Gan,Ultraviolet-induced free radical reactions in ENR50/alkyd blend leading to significant increase in cross-linking, 2014, Journal of Elastomers & Plastics I-16, DOI: 10.1177/0095244314526740
  48. Yeong Siang Chiam, Kok Sing Lim, Sulaiman Wadi Harun, Seng Neon Gan, Sook Wai Phang.2014.Conducting polymer coated optical microfiber sensor for alcohol detection. Sensors and Actuators A, 205:58-62
  49. A. R. N. Azimi , Rosiyah Yahya & Seng-Neon Gan (2013): Investigating Effect of Conventional and Nano Zinc Pigments on Air-Drying Property of Palm-Stearin-Based Alkyd Resin Paints, International Journal of Polymeric Materials and Polymeric Biomaterials, 62:4, 199-202
  50. A.R.N.Azimi, R.Yahya, S.N.Gan. 2013. Improve coating characteristics of palm stearin alkyd by modification with ketone resin. Progress in Organic Coatings, 76, 712- 719.
  51. Desmond T.C.Ang, Y.K.Khong, S.N.Gan. 2013. Novel approach to enhance film properties of environmentally friendly UV-curable alkyd coating using epoxidised natural rubber. Progress in Organic Coatings, 76,705-711
  52. Khong, Y. K. and Gan, S. N. (2013), Blends of phthalic anhydride-modified palm stearin alkyds with high carboxylic acid contents with epoxidized naturalrubber. J. Appl. Polym. Sci.. doi: 10.1002/app.39135
  53. MeiChan Sin, Irene Kit Ping Tan, Mohd Suffian Mohd Annuar, Seng Neon Gan (2013) Kinetics of thermodegradation of palm kernel oil derived medium chain length polyhydroxyalkanoates, Journal of Applied Polymer Science 127(6): 4422-4425
  54. S.Y.Lee and S.N.Gan, 2013, The Adhesion Properties of Natural Rubber Pressure-Sensitive Adhesives Using Palm Kernel Oil-based Alkyd Resins as a Tackifier, Composite Interfaces, p1-12.
  55. Salim Yoga Sugama, Chan Chin Han, K.Sudesh Kumar and Gan Seng Neon, 2013, Influence of Thermal Treatment on the Molecular Weights of Polyhdroxyalkanote containing 3- hydroxyhexanote, Advanced Materials Research, Vol 812, pp250-253
  56. T. S. Velayutham, W. H. Abd Majid, B. K. Ng, S. N. Gan, 2013. Effect of Oleic Acid Content and Chemical Crosslinking on the Properties of Palm Oil-Based Polyurethane Coatings. Journal of Applied Polymer Science 129(1):415-421
  57. Wan Nurhidayah A.Karim, Jin Guan Ng, Chin Han Chan, Seng Neon Gan, 2013, Preparation and Characterization of Blends of Poly(ethylene oxide) and Functionalized Epoxidised Natural Rubber, Int.J.Materials Engineering Innovation, Vol 4, Nos 3/4, p314-324
  58. Desmond Teck Chye Ang and Seng Neon Gan, Environmental friendly UV-curable resins from palm stearin alkyds, Journal of Applied Polymer Science, DOI:10.1002/app.36858, 7 Apr 2012. [Vol 125, Iss:S2, pE306-313]
  59. T.Hattori, K.Terakawa, N Ichikawa, T.Sakaki, Gan S N and Lee S Y, "Rubber Composistion for Tire and Pneumatic Tire Using the Same", 2012, United States Patent, US 8,100,157,B2, Jan 24, 2012
  60. T.S Velayutham, W. H. Abd. Majid, S.N.Gan, Dielectric Behaviour of Polyurethane Coatings Derived from Palm Oil Oleic Acid-Based Polyols- A reenwable resource, Journal of Oil Palm Research, 2012, Vol. 24, pp 1260- 1266
  61. T.S.Velayutham, W.H.Abd Majid, W.C.Gan, A.Khorsand Zak and S.N.Gan, 2012. Theoretical and experimental approach on dielectric properties of ZnO nanoparticles and polyurethane/ZnO nanoparticles. Journal of Applied Physics 112, 054106. Doi: 10.1063/1.4749414
  62. Velayutham,T.S., Abd Majid,W.H., Gan,S.N. 2012. Dielectric behaviour of polyurethane coatings derived from palm oil oleic acid-based polyols - a renewable resource. Journal of Oil Palm Research. 24, 1260-1266.
  63. GAN Seng Neon, Noor Hayati Abu Kasim, Fadhel Alsanabana, Zambri Radzi and Noor Azlin Yahya.2011. Polyurethane oligomers for use in restorative dentistry. WIPO, WO2010143934, demand filed 22.03.2011
  64. GAN,Seng Neon, YAP Soon Chee and CHANG Chin Shia. 2011. Fibreboard from agricultural wastes and a method from manufacturing the same. WIPO Patentscope, WO2011062472.
  65. GAN,Seng Neon. 2011. Natural oil-based chemically produced toner. WIPO Patentscope, WO/2011/037446.
  66. Mei Chan Sin, Irene Kit Ping Tan, Mohd Suffian Mohd Annuar, Seng Neon Gan. 2011. Characterization of Oligomeric Hydroxyalkanoic Acids from Thermal Decomposition of Palm Kernal Oil-Based Biopolyester. International Journal of Polymer Anal. Charact. 16:5, 337-347.
  67. Mei Chan Sin, Seng Neon Gan, Mohd Suffian Mohd Annuar, Irene Kit Ping Tan. 2011. Chain cleavage mechanism of palm kernel oil derived medium-chain-length poly(3- hydroxyalkanoates) during high temperature decomposition. Polymer Degradation and Stability. doi:10.1016/j.polymdegradstab.2011.06.004
  68. Seng Neon Gan. 2011. Environmentally Friendly Natural Oil-Based Toner Resin. US Patent: US2011/00217210, Published Jan 27,2011
  69. Shahla Ataei, Rosiyah Yahya & Seng Neon Gan. 2011. Palm Oleic Acid Based Alkyds: Effect of the Fatty Acid Content on the Polyesterification Kinetics. J Polym Environ 19: 540-545.
  70. Shahla Ataei, Rosiyah Yahya and Seng Neon Gan*.2011. Fast physical drying, high water and salt resistant coatings from non-drying vegetable oil. Progress in Organic Coatings
  71. Siang Yin Lee, Seng Neon Gan, Aziz Hassan, Katsumi Terakawa, Takayuki Hattori, Naoyachikawa, Dick Hong Choong. 2011. Reactions between epoxidized natural rubber and palm oil-based alkyds at ambient temperture. Journal of Applied Polymer Science, 120 (3), p1503-1509
  72. Sonja Then, Gan Seng Neon & Noor Hayati Abu Kasim. 2011. Optimization of Microencapsulation Process for Self-Healing Polymeric Material. Sains Malaysiana. 40 (7), p795-802
  73. Sonja Then, Gan Seng Neon, Noor Hayaty Abu Kasim. 2011. Performance of melamine modified urea- formaldehyde microcapsules in a dental host material. DOI:10.1002/app.34361
  74. T.S.Velayutham, W.H.Abd Majid, S.N.Gan. 2011. Electrical Behavior of Polyurethane Derived from Polyols Synthesized with Glycerol, Phthalic Anhydride, and Oleic Acid. Journal of Applied Polymer Science. Vol 121, p 1796-1803
  75. Wong,J.S.,Gan,S.N.& Aishah,M.J.2011. Chromium(III) Based Ziegler-Natta Catalysts for Olefin Polymerization. Sains Malaysiana 40(7):771-779.
  76. L.H.Sim, S.N.Gan, C.H.Chan, R.Yahya. 2010. ATR-FTIR studies on ion interaction of lithium perchlorate in polyacrylate/poly(ethylene oxide) blends. Spectrochimica Acta Part A, 76:287-292
  77. Mei Chan Sin , Seng Neon Gan, Mohd Suffian Mohd Annuar, Irene Kit Ping Tan, 2010.Thermodegradation of medium-chain-length poly(3-hydroxyalkanoates) produced by Pseudomonas putida from oleic acid.Polymer Degradation and Stability 95: 2334-2342
  78. Siang Yin Lee,Seng Neon Gan*,Aziz Hassan,Katsumi Terakawa,Takayuki Hattori,Naoya Ichikawa,Dick Hong Choong. 2010. Reactions Between Epoxidized Natural Rubber and Palm Oil-Based Alkyds at Ambient Temperature. Journal of Applied Polymer Science,DOI 10.1002/app.33290, Published online 29 Nov 2010 in Wiley Online Library (wileyonlinelibrary.com)
  79. Seng Neon Gan, Siang Yin Lee, Aziz Hassan, Takayuki Hattori and Dick Hean Choong. 2009. Modifications of Natural Rubber and Epoxidised Natural Rubber Compounds by Palm Oil-based Alkyds. Rubber Technology Developments, MRB. 9(1):11-14
  80. Siang Yin Lee, Aziz Hassan, Irene K. P. Tan, Katsumi Terakawa, Naoya Ichikawa, Seng Neon Gan*, 2009, Reactions of palm oil-based mcl-PHAs with epoxidized natural rubber,Journal of Applied Polymer Science,Vol 115, Issue 4, start page 2039 (Issue published online 13 Nov 2009)
  81. Sim,L.H.,Gan,S.N., Chan,C.H., Kammer,H.W.,Yahya,R., 2009, Compatibility and conductivity of LiClO4- free and doped polyacrylate-poly(ethylene oxide) blends,J.Material Research Innovations, 13(3):278-81
  82. Swee Yong Chee, Seng Neon Gan,2009, Swelling properties of copolymers of styrene and divinylbenzene containing sulfonic and carboxylic acid groups, Journal of Applied Polymer Science, Vol 111(3), p1151- 1658
  83. T. S. Velayutham, W. H. Abd Majid, A. B. Ahmad, Yik Kang Gan, Seng Neon Gan, The physical and mechanical properties of polyurethanes from oleic acid polyols,Journal of Applied Polymer Science, Published Online: Mar 11 2009
  84. T.S. Velayutham, W.H. Abd. Majid, A.B. Ahmad, Yik Kang Gan and Seng Neon Gan, "The physical and mechanical properties of polyurethanes from oleic acid polyols.", Journal of Applied Polymer Science 112 (6) 3554-3559
  85. Velayutham, T., et al., Synthesis and characterization of polyurethane coatings derived from polyols synthesized with glycerol, phthalic anhydride and oleic acid. Progress in Organic Coatings, 2009. 66(4): p. 367-371.
  86. Velayutham,T.S.,Abd Majid,W.H.,Ahmad,A.B.,Gan,Y.K. and Gan,S.N. 2009. Synthesis and characterization of polyurethane coatings derived from polyols synthesized with glycerol, phthalic anhydride and oleic acid, Progress in Organic Coatings. 66: p367-371 doi:10.1016/j.porgcoat.2009.08.013, available online 16 September 2009
  87. B.B.Mougang D.Soume, Rosiyah, Yahya, Gan S.N., and Ng S W. 2008, Diaqua- -oxido-hexakis( - trichloroacetato- k2 O:O ) (trichloroacetato-kO)- trichromium(III) acetonitrile trisolvate, Acta Crystallographica Section E, Vol 64, part 9, m 1175.
  88. Mohd Jamil Maah,Che Ibrahim Abdullah,Seng Neon Gan, Aishah Mohd Jelanb and Seik Weng Ng, Hexa-2-acetato- 12O:O'-3-oxido-tris[aquachromium(III)] nitrate acetic acid solvate, Acta Crystallographica Section E, Vol 64, Part 10. 2008 (ISI-Cited Publication)
  89. Velayutham,T.S., Ahmad,A.B., Adb Majid, W.H. and Gan S N, 2008, Electrical properties of polyurethane graphite composites, Electrical properties of polyurethane graphite composites, , Jurnal Fizik Malaysia, 29, 1
  90. Radzi, Z., Abu Kasim, N.H, Yahya, N.A., Gan, S.N., Daud, N.M., Saffai, L. Fadhel, F.A. (2007). Impact strength of an experimental polyurethane-based polymer. Annals of Dentistry University of Malaya, 14,46-51.
  91. Sidik Marsudi, Irene K.P.Tan, Seng-Neon Gan, and K.B.Ramachandran,2007, PRODUCTION OF MEDIUM CHAIN LENGTH POLYHYDROXYALKANOATES FROM OLEIC ACID USING Pseudomonas putida PGA1 BY FED BATCH CULTURE, MAKARA, TEKNOLOGI, VOL. 11, NO.1, APRIL 2007: 1-4
  92. CHEE SWEE YONG AND GAN SENG NEON,2006, ULTRAVIOLET CURABLE DRY POLYMER FILMS FROM EMULSION POLYMERS, JOURNAL OF APPLIED POLYMER SCIENCE Vol 100, 3 , p2317- 2322
  93. CHEE SWEE YONG AND GAN SENG NEON, 2005, EFFECTS OF MONOMER COMPOSITION ON THE SWELLING OF COPOLYMERS WITH HIGH CONTENT OF CARBOXYLIC ACID IN THE CORE, MALAYSIAN JOURNAL OF CHEMISTRY 7 1
  94. K. VIVAYGANANTHAN, P-F LAI, S-N GAN, CM FELLOWS, RG GILBERT,2005, A NOVEL METHOD FOR PREPARING LOW- ALLERGEN NATURAL RUBBER LATEX,Aust. J. Chem., 58, 461-7
  95. Gan Seng Neon. 2004. Research In Polymer Chemistry Using Local Raw Materials. UM.Inaugural Lecture, 11 Feb 2004.
  96. Y.C.LEONG, M.S.LEE AND S.N GAN, THE VISCOELASTIC PROPERTIES OF NATURAL RUBBER PRESSURESENSITIVE ADHESIVE USING ACRYLIC RESIN AS A TACKIFIER, J.APPL POLYMER SCI 88 8 2003
  97. SENG-NEON GAN AND BOON YEOW TAN.2001. FTIR STUDIES OF THE CURING REACTIONS OF PALM OIL ALKYD-MELAMINE ENAMELS. JOURNAL OF APPLIED POLYMER SCIENCE 80:2309- 2315
  98. CHUAH AI WAH, LEONG YUB CHOONG AND GAN SENG NEON EFFECTS OF TITANATE COUPLING AGENT ON RHEOLOGICAL BEHAVIOUR, DISPERSION CHARACTERISTIC AND MECHANICAL PROPERTIES OF TALC FILLED POLYPROPYLENE, EUROPEAN JOURNAL OF POLYMER SCIENCE 36 4 2000
  99. SENG-NEON GAN* AND KIM TECK TEO, EFFECT OF COMPOSITION VARIATION AND CURING TEMPERATURE ON THE GLOSS OF WATER REDUCIBLE CLEAR ENAMELS PREPARED FROM PALM STEARIN ALKYDS, FOCUS ARTICLE IN SURFACE COATINGS INTERNATIONAL 82 1 JANUARI 1999
  100. SENG-NEON GAN* AND KIM-TECK TEO.1999, CURING AND FILM PROPERTIES OF PALM STEARIN ALKYDS, PIGMENT AND RESIN TECHNOLOGY 28,283-292
  101. K.P.CHUA, S.N.GAN AND K.K.CHEE DETERMINATION OF AVRAMI EXPONENT BY DIFFERENTIAL SCANNING CALORIMETRY FOR NON-ISOTHERMAL CRYSTALLIZATION OF POLYMERS POLYMER 40 1998
  102. A.H.ENG, Y.TANAKA AND S.N.GAN, SOME PROPERTIES OF EPOXIDISED DEPROTEINISED NATURAL RUBBER , J.NAT.RUBB.RES. 12 2 1997
  103. D.R.BURFIELD, SENG NEON GAN AND R.H.SMITHERS REACTIONS OF MONO- AND TRI-SUBSTITUTED EPOXIDES WITH SIMPLE AND B-SUBSTITUTED AMINES A NOVAL ENHANCING EFFECT BY WEAKLY ACIDIC GROUPS, J.CHEM.SOC.,(PERKIN I) 1977
  104. Feature article in Malaysian Technology: Water-borne Polymers, Published by Malaysian Technology Development Corporation, Jan-March issue, 1997 p38-39
  105. G. Redzwan, S.N. Gan and I.K.P. Tan. 1997. Isolation of polyhydroxyalkanoates (PHA) - producing bacteria from an intergrated-farming pond and palm oil mill effluent (POME), World Journal of Microbiology and Biotechnology. 13(6): 707-709. (Q2. ISI. I.F. 1.53)
  106. G.REDZWAN, S.N.GAN AND I.K.P.TAN, 1997,SHORT COMMUNICATION: ISOLATION OF POLYHYDROXYALKANOATE-PRODUCING BACTERIA FROM AN INTEGRATED-FARMING POND AND PALM-OIL MILL EFFLUENT PONDS WORLD JOURNAL OF MICROBIOLOGY AND BIOTECHNOLOGY 13 1997
  107. GAN, SENG-NEON CROSSLINKING REACTIONS RESPONSIBLE FOR THE STORAGE HARDENING IN NATURAL RUBBER ,IN CURRENT TRENDS IN POLYMER SCIENCE 2 1997
  108. Gan Seng Neon,Making things happen, Malaysian Technology, Published by Malaysian Technology Development Corporation, Jan-March issue, 1997 p69-73.
  109. IRENE K.P.TAN, K.SUDESH KUMAR, M.THEANMALAR, SENG-NEON GAN AND BERNARD GORDON III SAPONIFIED PALM KERNEL OIL AND ITS MAAJOR FREE FATTY ACID AS CARBON SUBSTRATES FOR THE PRODUCTION OF POLYHYDROXYALKANOATE IN PSEUDOMONAS PUTIDA PGA1 APPL-MICROBIOL-BIOTECHNOL 47 3 1997
  110. KIM-TECK TEO AND SENG-NEON GAN ALKYDS FROM PALM STEARIN ,PAINT AND INK INTERNATIONAL OCT 1977
  111. SENG NEON GAN and ZIANA ABD HAMID - Partial converion of epoxide groups to diols in epoxidized natural rubber , Polymer, 38(8), p.1953-1956 (April 1997).
  112. S.N.Gan, Storage hardening of natural rubber , J.M.S.-Pure Appl.Chem. A33(12), p1939-948, December, (1996)
  113. SENG-NEON GAN, NADARAAJA SUBRAMANIAM AND ROSIYAH YAHYA, HYDROGENATION OF NATURAL RUBBER USING 2-ETHYLHEXANOATE CATALYST IN COMBINATION WITH TRI-ISOBUTYLALUMINUM, JOURNAL OF APPLIED POLYMER SCIENCE 59 1996
  114. A.M.AJELAN, S.N.GAN AND M.C.LIM THE USE OF TRANS-u-OXO TRIS{DICHLOROACETATOAQUOCHROMIUM(III)} DICHLOROACETATETETRAHYDRATE AS A ZIEGLER-NATTA CATALYST IN THE POLYMERIZATION OF ETHYLENE,BULETIN KIMIA 10 1 1995
  115. MENG CHAY LIM, WEI CHEN, SENG NEON GAN, AISHAH MOHD AJELAN AND RAY BUTCHER "STRUCTURE OF TRINUCLEAR [CR3O(CLCH2COO)63H2O]CLCH2COO.2H2O"AJOURNAL OF CRYSTALLOGRAPHIC AND SPECTROSCOPIC RESEARCH 23 1 1993
  116. SENG-NEON GAN AND KOW-FONG TING, EFFECT OF TREATING LATEX WITH SOME METAL IONS ON STORAGE HARDENING OF NATURAL RUBBER, POLYMER 34 10 1993
  117. A.H.ENG, Y.TANAKA, AND S.N.GAN, FTIR STUDIES ON AMINO GROUPS IN PURIFIED HEVEA RUBBER, J.NATURAL RUBBER RESEARCH 7 2 1992
  118. SENG NEON GAN AND D.R.BURFIELD, DSC STUDIES OF THE REACTION BETWEEN ENR AND BENZOIC ACID, POLYMER 60 1989
  119. SENG CHIEW GAN,SENG NEON GAN AND YASUYUKI TANAKA, PRELIMINARY RESULTS ON DETECTION OF MYCOLIC ACIDS BY GPC AND NMR, MALAYSIAN JOURNAL OF PATHOLOGY 9 AUGUST 1987
  120. SENG NEON GAN, SHIAN-ING CHEN, RIKUO OHNISHI, AND KAZUO SOGA,HOMO- AND COPOLYMERIZATION OF ETHYLENE AND PROPYLENE USING A HETEROGENEOUS CHROMIUM CATALYST SYSTEM, POLYMER 28 JULY 1987
  121. SENG NEON GAN,MENG CHAY LIM,SHIEN ING CHEN AND KAZUO SOGA, MODIFIED CHROMIUM(III) ACETATE CATALYST USED IN THE POLYMERIZATION OF OLEFINS, JOURNAL OF CATALYSIS 105 1987
  122. SENG NEON GAN,D.R.BURFIELD AND KAZUO SOGA, DSC STUDIES OF ETHYLENE-PROPYLENE COPOLYMERS, MACROMOLECULES 18 1985
  123. SENG NEON GAN, SHIEN ING CHEN RIKUO OHNISHI AND KAZUO SOGA -PRELIMINARY RESULTS ON THE HOMO- AND CO-POLYMERIZATION OF ETHYLENE AND PROPYLENE BY USING A NEW CHROMIUM CATALYST, MAKROMOL.CHEM.,RAPID COMMUN 5 9 1984
  124. D.R.BURFIELD AND SENG NEON GAN, DETERMINATION OF EPOXY GROUPS IN NATURAL RUBBER BY DEGRADATION METHODS , POLYMER 18 1977
  125. D.R.BURFIELD AND SENG NEON GAN, NON-OXIDATIVE CROSSLINKING REACTIONS IN NATURAL RUBBER, PART II - A, J.POLYM.SCI.,POLYM.CHEM.ED 15 1977
  126. David R. Burfield, Seng-neon Gan and Roger H. Smithers, 1977, Reactions of a mono- and a tri- substituted epoxide with some simple and -substituted primary amines; novel examples of electrophilic anchimeric assistance, J. Chem. Soc., Perkin Trans. 1, 1977, 666 - 671
  127. D.R.BURFIELD AND SENG NEON GAN, ACCELERATED STORAGE HARDENING OF NATURAL RUBBER - A MODIFIED TEST METHOD, MALAYSIAN JOURNAL OF SCIENCE 4 B 1976
  128. D.R.BURFIELD,L.C.CHEW AND SENG NEON GAN , DISTRIBUTION OF ABNORMAL GROUPS IN NATURAL RUBBER, POLYMER 17, 1976
  129. GAN SENG NEON EPOXIDE GROUPS IN NATURAL RUBBER AND THEIR ROLE IN STORAGE HARDENING, PH.D. THESIS APRIL 1976
  130. D.R.BURFIELD AND SENG NEON GAN, NON-OXIDATIVE CROSSLINKING REACTIONS IN NATURAL RUBBER, PART I - A J.POLYMER SCI.,POLYM.CHEM.ED 13 1975
Books
  1. Gan Seng Neon Penulis bagi kata masukan Ensiklopedia Umum PelaAJar, Dewan Bahasa dan Pustaka, Oktober-Disember 1998.
  2. Gan Seng Neon - Translation of Chemistry - the central science into Malay language for Dewan Bahasa dan Pustaka, Part III - Chapters 21-27, Glossaries and indexes. Date of AJob completion, September 1996.
  3. Y.MURATA AND GAN SENG NEON, ISTILAH KIMIA "CHEMICAL TERMINOLOGIES : MALAY-JAPANESE-ENGLISH 1988
  4. Y.Murata and Gan Seng Neon, Istilah Kimia "Chemical terminologies : Malay-AJapanese-English", Mizutani Publ., Aichi, AJapan, AJan.1988.
  5. Y.Murata and Gan Seng Neon, Istilah Kimia "Chemical terminologies : Malay-Japanese-English", Mizutani Publ., Aichi, Japan, Jan.1988
  6. Y.Murata and S.N.Gan, Chemistry terminologies : Bahasa Malaysia- A Japanese-English U.M.Publ.January 1986.
  7. Y.Murata and S.N.Gan, Chemistry terminologies : Bahasa Malaysia- Japanese-EnglishU.M.Publ.January 1986
  8. Gan Seng Neon, Buku DarAJah Kimia Modern Preston Corporation, 1983, second reprint 1985.
  9. Gan Seng Neon, Buku Darjah Kimia Modern Preston Corporation, 1983, second reprint 1985
  10. Gan Seng Neon and Marwardi Rahmani, Pengenalan Kimia Fizikal untuk STP dan Kursus- kursus Matrikulasi, UMCB Publication, Kuala Lumpur(1982)
  11. Gan Seng Neon and Marwardi Rahmani, Pengenalan Kimia Fizikal untuk STP dan Kursus- kursus Matrikulasi, UMCB Publication, Kuala Lumpur(1982)
Chapter in Books
  1. Gan, Seng-Neon, Introduction to the chemistry of polymeric materials , in Polymeric Materials , published by Norasa Publishing House, 6 Community Centre, Panchsheel Park, New Delhi 110017, India, April 1998.
  2. Gan, Seng-Neon, Crosslinking reactions responsible for the storage hardening in natural rubber , in Current Trends in Polymer Science, Vol 2,p69-82, 1997
  3. Gan Seng Neon - Translation of Chemistry - the central science into Malay language for Dewan Bahasa dan Pustaka, Part III - Chapters 21-27, Glossaries and indexes. Date of job completion, September 1996
  4. LAY-FOONG SIAH, V.G.KUMAR DAS AND SENG NEON GAN,EDITED BY V.G.KUMAR DAS, COPOLYMERIZATION OF SUBSTITUTED TRIBUTYLTIN CINNAMATES WITH STYRENE, SYNTHESIS, REACTIVITY RATIOS, RELATIVE REACTIVITIES, NMR AND MOSSBAUR ASSIGNMENTS AND THERMAL ANALYSIS, IN MAIN GROUP ELEMENTS AND THEIR COMPOUNDS-PERSPECTIVES IN MATERIALS SCIENCE, CHEMISTRY AND BIOLOGY 1996
  5. S.N.Gan, D.R.Burfield, Patrick Loi, S.C.Ng - Active center determination in Ziegler-Natta polymerization: An innovative duel-labeling approach", in "Catalyst Design for Tailor-Made Polyolefins", Books in Surface Science and Catalysis, vol. 89, 1994, p91-100, Elsevier Science, edited by K.Soga and M.Terano,
Article in Proceeding
  1. Al-Sanabani,F., Abu Kasim,N.H. and Gan S.N., 2008 Conversion of a New Monomer for Dental Resin Application, International Association for Dental Research South East Asian Division22nd Annual Scientific Meeting, South East Asia Association for Dental Education 19th Annual Meeting, Manila, Oct 8-10.
  2. Gan, S.N. 2008, Analysis of Emulsion Paints by FTIR and TGA, Proceedings of the Conference on Materials Characterization, Perkin Elmer, Equatorial Hotel, Bangi, 12-8-08, p2.
  3. Gan, S.N. 2008, Applications of TGA for problem solving and QC, , Proceedings of the Workshop on MOLECULAR & THERMAL CHARACTERIZATIONS, Anjuran IKM dan Jab.Kimia,UM, 9-5-08, part 4.
  4. Gan,S.N. 2008, Applications of FTIR in polymer research and problem solving, Proceedings of the Workshop on MOLECULAR & THERMAL CHARACTERIZATIONS, Anjuran IKM dan Jab.Kimia,UM, 8-5-08, part 4.
  5. Shahabudin, N., Abu Kasim, N.H. and Gan,S.N. 2008, Fluxural Strength of PMMA Modified with Palm-oil Based Polyol, Proceedings of International Association of Dental Research General Session, Toronto, July 2-5. Paper #105484.
  6. Shahabudin,N., Abu Kasim,N.N. and Gan,S.N. 2008, Modification of PMMA Dental Resin with Palm Oil Based Polyol, International Association for Dental Research South East Asian Division22nd Annual Scientific Meeting, South East Asia Association for Dental Education 19th Annual Meeting, Manila,
  7. Zaleha Isa,S., Gan,S.N. and Yahya R. 2008, Synthesis and Characterization of New Polyurethane Foams from liquid natural rubber, ICMC International Conference on Molecular Chemistry 2008, 25-27 November. Poster.
  8. Azlina P., Gan, S. N., and Rosiyah Y. 2007, Alkyds from Capelin fish oil, Asia Chemical Congress (ACC2007), 23-25 August, 2007, PWTC, Kuala Lumpur
  9. Choong, D. H., Hattori, T., Gan,S. N. and Lee, S. Yin. 2007, A Study of Vegetable Oil based Alkyd Resin as a tackifier of rubber compound, Asia Chemical Congress (ACC2007), 23-25 August, PWTC, Kuala Lumpur
  10. Choong,D.H., Isobe, Y., Sakaki,T., Hattori, T., Lee, S.Y., Gan Y.K., Khodijah, A.K., and Gan, S.N. 2007, A Study of Alkyd Resin Synthesized From Vegetable Oil and Aliphatic Polybasic Acid as a Tackifier of Rubber Compound, 16th Polymer Material Forum, the Society of Polymer Science of Japan, PMF2007, Tokyo on 20-30 November.
  11. Gan,S.N., Hashim, R., Jamil, M. M, 2007, Study of Ethylene Polymerization by the Agitated Dry Phase Reactor, Proceedings the Second International Conference on Advances in Petrochemicals and Polymers, ICAPP 2007, June 25-28th Bangkok, Thailand.
  12. Lee, S. Y., Gan, S. N. , Irene Tan, K.P., and Aziz H. 2007, Modification of Epoxidized Natural Rubber by polyhydroxyalkanoates, Asia Chemical Congress, (ACC2007), 23-25 August, 2007, PWTC, Kuala Lumpur
  13. Tan, S. H., Mohd Jamil M., and Gan, S. N. 2007, Ziegler-Natta polymerization of ethylene and propylene using chromium catalyst synthesized from chromium(III) acetate complex, Asia Chemical Congress (ACC2007), 23-25 August, PWTC, KL
  14. Gan, S. N. 2006, Recent developments of palm oil based polyurethanes, Keynote Address on Chemistry, at the Malaysian Science and Technology Congress held on 18-20 Sept 2006, at PWTC.
  15. Gan, S.N. 2006, Palm oil-based solvent, an environmentally friendly alternative for inks, Exhibition Seminar, Chinacoat 2006, C507, 1B-5, Nov 9, Guangzhou, China.
  16. Gan, S.N. 2006, Toner Resins and Chemical Toners, Proceedings Asia Imaging Materials,AIF, Sunway Convention Centre, 29 June-2 July.
  17. Hattori,T., Choong, D. H., Gan, S. N. and Lee, S. Y. 2006, A study of alkyd resin synthesized by using the vegetable oil as a tackifier of rubber compound, 15th Polymer Material Forum, the Society of Polymer Science of Japan,16-17th November, Life Science Centre Senri, 2-4-1 Shin-Senri-Higashi-machi, Toyonaka-City, Osaka.
  18. Lee, S. C., Azlina P., Gan, Y. K., Wong, Y.C., Teo, K.T., Thamil Selvi, Abd Majid, W.H., Rosiyah, Y., Aziz, H., Tahir,M., Irene Tan, and Gan. S.N.,2006, Polymeric Materials from Palm Oil Industry, Invited Speaker at The Second Mathematics and Physical Science Graduate Conference (MPSGC), National University of Singapore from December 11-13
  19. Sim, L. H., Gan, S. N., Rosiyah Y, Chan, C. H., Munirah O, Noor Shimariz A.W., Siti, J. Chupin. 2006, Thermal properties and Morphology of polymer blends comprising poly(ethylene oxide) and polyacrylate, Proceedings VI-National symposium for polymeric materials, Holiday Villa, Subang Jaya, 13-14 December.
Other Publications
  1. Seng Neon Gan. 2015. A Review of Some New Polymeric Materials from Palm Oil and Derivatives. Chemistry in Malaysia, IKM. - Review
  2. Seng-Neon Gan*, Aishah Mohd Jelan and Chui Ping Ooi, Trinuclear oxo-centered chromium (III) carboxylate complexes as Ziegler-Natta catalysts for ethylene polymerization , Paper 4 in Progress and Development of Catalytic Olefin Polymedrization Edited by Tsuneji Sano, Toshiya Uozumi, Hisayuki Nakatani and Minoru Terano, Technology and Education Publishers, Tokyo, April 2000. - Monograph

RESEARCH INTEREST

  • Rubber (storage hardening, chemical modifications, adhesives, anti-tackiness, gloves )
  • biopolymers (PHA, plasticizers, degradation, bio-medical )
  • natural oil alkyds and polyols for polyurethanes (foams, dental materials, adhesives, coatings)
  • toner resins (hybrid resins, conventional toner, PCT, biotoner)
  • Ziegler-Natta catalysts (polyolefins , active cites, Cr-based catalysts)

RESEARCH PROJECT

National
  1. 2021 - 2025, Fundamental Research Grant Scheme (FRGS)
    Elucidation On The Effect Of Flexibility Of Ionic Crosslinks In Carboxylated Acrylonitrile-based Rubber On Its Mechanical Properties And Biodegradability ( Co-Researcher)
  2. 2016 - 2019, Postgraduate Research Grant (PPP) - Research
    SYNTHESIS AND CHARACTERIZATION OF SURFACE COATING DERIVED FROM PET WASTE BASED ALKYD RESIN FOR CORROSION PROTECTION ( Principal Investigator(PI))
  3. 2016 - 2018, Postgraduate Research Grant (PPP) - Research
    SYNTHESIS AND CHARACTERIZATION OF WATER-SOLUBLE POLYANILINE FOR HYDRAZINE DETECTION ( Principal Investigator(PI))
  4. 2016 - 2018, Postgraduate Research Grant (PPP) - Research
    Synthesis of New Polyaniline/Palm Wax Alkyd Hybrid in Solar Panel Application ( Principal Investigator(PI))
  5. 2014 - 2017, Postgraduate Research Grant (PPP) - Research
    Synthesis, Characterization And Application Of Polyaniline (pani)optical Sensor For Volatile Organic Compounds. ( Principal Investigator(PI))
  6. 2014 - 2017, Postgraduate Research Grant (PPP) - Research
    Microcapsules for properties enhancement of composite materials ( Principal Investigator(PI))
  7. 2015 - 2017, Postgraduate Research Grant (PPP) - Research
    Synthesis Of Uv Curable Resins From Palm Fatty Acid Distillate ( Principal Investigator(PI))
  8. 2013 - 2016, Geran Penyelidikan Universiti Malaya (UMRG) - AFR (Frontier Science)
    Synthesis And Characterization Of Novel Conducting Polymers As Electromagnetic Interference Shielding (emi) Materials And Electroactivity Devices. ( Principal Investigator(PI))
  9. 2012 - 2016, Postgraduate Research Grant (PPP) - Research
    Preparation Characterization Of Reactive Blends Of Funtionalized Polyether And Expoxidized Natural Rubber ( Principal Investigator(PI))
  10. 2014 - 2016, Postgraduate Research Grant (PPP) - Research
    Epoxidized Natural Rubber (ENR) Latex-based Adhesives for Particleboard ( Principal Investigator(PI))
  11. 2013 - 2015, MOSTI-Science Fund
    Alkyd Core-shell Structure For Crack-resistant Polymeric Materials ( Principal Investigator(PI))
  12. 2009 - 2011, Postgraduate Research Grant (PPP) - Research
    DEVELOPMENT OF ENVIRONMENTAL FRIENDLY PRESURE SENSITIVE ADHESIVES FROM NATURAL RUBBER LATEX
  13. 2009 - 2011, Postgraduate Research Grant (PPP) - Research
    SYNTHESIS OF TONER RESINS BY COPOLYMERIXATION
  14. 2009 - 2011, Postgraduate Research Grant (PPP) - Research
    SYNTHESIS OF CHROMIUM (III) COMPLEXES FOR COPOLYMERIZATION OF ETHYLENE AND PROPYLENE
  15. 2009 - 2011, MOSTI-Science Fund
    MICROENCAPSULATION PROCESS FOR THE DEVELOPMENT OF CRACK RESISTANT DENTAL COMPOSITES ( Principal Investigator(PI))
  16. 2010 - 2011, Postgraduate Research Grant (PPP) - Research
    REACTIVE BLENDES OF EPOXIDIZED NATURAL RUBBER AND POLYETHYLENE OXIDE
  17. 2010 - 2011, Postgraduate Research Grant (PPP) - Research
    PREPARATION OF PALM OIL BASED ALKYD AS UV CURABLE COATING
  18. 2010 - 2011, Postgraduate Research Grant (PPP) - Research
    REACTIONS OF PALM OIL BASED ALKYDS WITH EXPOXIDIZED NATURAL RUBBER (ENR)
  19. 2007 - 2010, Postgraduate Research Grant (PPP) - Research
    DEVELOPMENT OF PALM OIL BASED DENTAL POLYMERS
  20. 2008 - 2010, Postgraduate Research Grant (PPP) - Research
    THERMAL PROPERTIES AND ELECTRICAL PROPERTIES OF POLYMER BLENDS COMPROSING A POLYCRYLATE, POLY (ETHYLENE OXIDE) AND LITHIUM SALT
  21. 2009 - 2010, Postgraduate Research Grant (PPP) - Research
    MICROHARDNESS OF EXPERIMENTAL COMPOSITES BASED ON BIOPOLYOL-URETHANE DIMETHACRYLATE
  22. 2009 - 2010, Postgraduate Research Grant (PPP) - Research
    PREPARATION OF STYRENE ACRYLIC COPOLYMERS TONER RESIN BY SUSPENSION POLYMERIZATION
  23. 2009 - 2010, Postgraduate Research Grant (PPP) - Research
    DEVELOPMENT OF SELF-HEALING POLYMER COMPOSITES FOR DENTAL APPLICATION
  24. 2007 - 2009, Postgraduate Research Grant (PPP) - Research
    MODIFICATION OF NATURAL RUBBER COMPOUNDS BY PALM OIL BASED ALKYDS AND POLYHYDROXYALKANOATES (PHA)
  25. 2008 - 2009, Postgraduate Research Grant (PPP) - Research
    EMULSION POLYMERISATION
  26. 2008 - 2009, Postgraduate Research Grant (PPP) - Research
    PREPARATION AND CHARACTERIZATION OF TONER RESINS
  27. 2008 - 2009, Postgraduate Research Grant (PPP) - Research
    SYNTHESIS OF CHROMIUM (III) COMPLEXES FOR COPOLYMERIZATION OF ETHYLENE PROPYLENE
  28. 2008 - 2009, Postgraduate Research Grant (PPP) - Research
    DEVELOPMENT OF SELF-HEALING POLYMER COMPOSITES FOR DENTAL APPLICATION
  29. 2008 - 2009, Postgraduate Research Grant (PPP) - Research
    PRODUCTION OF NANO FIBERS FROM PALM OIL BASED POLY URETHANE THROUGH ELECTROSPINNING
  30. 2007 - 2008, Postgraduate Research Grant (PPP) - Research
    DEGREE OF CONVERSION, POLYMERIZATION SHRINKAGE AND COEEFICIENT OF THERMAL EXPANSION OF EXPERIMENTAL POLYURETHANE OLIGOMER DERIVED FROM PLAM OIL
  31. 2007 - 2008, Postgraduate Research Grant (PPP) - Research
    CONERTING PALM FIBER TO BOARDS
  32. 2013 - 2016, High Impact Research (HIR)
    Cellulose nanocrystals for biobased composite reinforement : Internal structure and properties characzation study ( Consultant)
  33. 2013 - 2015, ScienceFund
    Alkyd Core-shell Structure for Crack-resistant Polymeric Materials ( Principal Investigator(PI))
  34. 2011 - 2013, Geran Penyelidikan Universiti Malaya (UMRG)
    A Study of Physical Properties of the Modified Montmorillonite Clay Minerals Found in Malaysia for Application in Filler Technology ( Consultant)
  35. 2009 - 2011, ScienceFund
    Microencapsulation process for the development of crack resistant dental composites. ( Principal Investigator(PI))
  36. 2006 - 2008, MOSTI
    Development of Palm Oil Based Dental Polymer ( Consultant)
  37. 2008
    Chemical modifications of rubber compounds
  38. 2008
    chemically produced toner resins
  39. 2008
    palm oil-based polyurethanes
  40. 2008
    polyhydroxyalkanoates(PHAs)
  41. 1996 - 2001, MOSTI (IRPA)
    Biodegradable Screws and plates for rigid maxillofacial fixation: a pilot study ( Consultant)
Private
  1. 2019 - 2021, Private Funding
    Developing Novel Environmental Friendly Polymer Coating For Rubber Gloves ( Principal Investigator(PI))

CONSULTANCY PROJECT

  • Technical Committee Member of Dsm (Dept of Standards Malaysia), DSM, Century Square, Level 1 & 2, Block 2300, Jalan Usahawan, 63000, Cyberjaya, Selangor, 63000
    01 Jun 2015 - 01 Jun 2017 (National)
  • Production of Palm Oil-Based Additives for Water-Based Coatings and Polyols in Polyurethanes, TOYOCHEM SPECIALTY CHEMICAL SDN BHD (Company No 373634-A)
    01 Nov 2015 - 01 Nov 2016 (National)
  • Incorporating Natural Materials Into Commercial Products., TOYOCHEM SPECIALTY CHEMICAL SDN BHD (Company No 373634-A).
    01 Nov 2015 - 01 Nov 2016 (National)
  • Modification of Existing Nitrile Latex With Palm Oil-Based Additives - Extension, Hartalega Sdn Bhd
    01 Sep 2015 - 01 Sep 2016 (National)
  • Synthesis and Formulation of Palm Kernel Oil-Based Alkyd Emulsions for Topical Application, International Medical University
    01 Dec 2013 - 01 Dec 2015 (National)
  • Modification of Nitrile Latex With Palm Oil-Based Emulsion, Hartalega Sdn Bhd
    01 Jul 2014 - 01 Jul 2015 (National)
  • Production of Fish Oil Polyols for The Manufacturing of Rigid Polyurethane Foams - Part of Licensing Activities, Ecotherm Sdn Bhd
    01 Jul 2014 - 01 Jul 2015 (National)
  • Development of Palm Oil-Based Compounds to Replace Certain Petroleum-Based Additives in Rubber Formulations, Bitutech Sdn Bhd,
    01 Jul 2014 - 01 Jul 2015 (National)
  • Water Reducible Acrylic Coating for Rubber Gloves- Based On: Patent My-139117-a, Check Suitability to Existing Systems, CCM Chemicals Sdn Bhd
    01 Jul 2012 - 01 Jul 2014 (National)
  • Modification of Existing Nitrile Latex With Palm Oil-Based Emulsion, Hartalega Sdn Bhd
    01 Dec 2012 - 01 Dec 2013 (National)
  • Modification of Existing Nitrile Latex With Palm Oil-Based Additives, Hartalega Sdn Bhd
    01 Sep 2011 - 01 Sep 2012 (National)
  • Development of Toner Resins & Cpt, Jadi Imaging Technologies Sdn Bhd
    01 Feb 2006 - 01 Feb 2009 (National)
  • Application of Polyhydroxyalkanoates (Phas) in Tire Compounds, Sumirubber Industry R&D, Kobe, Japan
    01 Nov 2004 - 01 Nov 2008 (International)
  • Application of Palm Oil Based Alkyds in Enr Compounds, Sumirubber Industry R&D, Kobe, Japan
    01 Nov 2005 - 01 Nov 2008 (International)
  • A Process of Producing Palm Oil Based Polyurethane Adhesives, Rovski Sdb Bhd, Subang Industrial Park
    01 Nov 2006 - 01 Nov 2007 (National)
  • Resins from Palm Oleochemicals, Cognis Oleochemicals Sdn Bhd
    01 Nov 2006 - 01 Nov 2007 (National)
  • Development of Polyester Polyols from Palm Oil for The Production of Flexible Polyurethane Foams, MASKIMI Polyols (M)Sdn Bhd.
    01 Nov 2003 - 01 Nov 2006 (National)
  • Improving The Palm Oil Based Ink Solvent, Mewahcoat Sdn Bhd
    01 Nov 2005 - 01 Nov 2006 (International)
  • Investigate Open Cell Polyurethane Chemical Elastopor Mh 6004, Rigidfoam Industries (M) Sdn Bhd
    01 Nov 2005 - 01 Nov 2005 (National)
  • Basic Research On The Production of Polyhydroxyalkanoates (Phas) With a View to Commercialization, Sumirubber Industry Kedah ( a subsidiary of Sumitomorubber Industry, Japan)
    01 Nov 2002 - 01 Nov 2004 (International)
  • Development of Palm Oil Polyols for The Production of Rigid Polyurethane Foams, MASKIMI Polyols (M)Sdn Bhd, Kajang Selangor
    01 Nov 2000 - 01 Nov 2002 (National)

PAPER PRESENTED

PLENARY SPEAKER
  1. Anti-Corrosion Coatings from Palm Oil-based Resins, International Symposium on Coatings and Corrosion 2016 (ISCC2016), IMM (International) (16 May 2016 - 19 May 2016)
  2. Research in polymer chemistry using local raw materials, 5th National Symposium in Polymer Materials NSPM5, UKM (National) (23 Aug 2005 - 23 Aug 2005)
INVITED SPEAKER
  1. Fabrication of Nanofibres from Biopolymers by Electrospinning as Scaffolds for Tissue Engineering, International Symposium on Advanced Polymeric Materials (ISAPM2016), Institute of Materials Malaysia (International) (16 Jun 2016 - 19 Jun 2016)
  2. Novel Polymeric Materials Synthesized from Palm Oil and Their Applications, EMN Bio-materials 2016, OAHOST, Open-Access Publication and Conference Management by Scientists and for Scientists. (International) (04 Apr 2016 - 07 Apr 2016)
  3. Development of novel polymeric materials from palm oil derivatives, #111 Chemistry Symposium, Chemistry Department, UM (University) (03 Mar 2016 - 03 Mar 2016)
  4. Environmental friendly palm oil-based polyesters as PVC plasticizers, WIZ-Plasticizer & Feedstock Conference, March 13-14, Grand Millennium, K.L., WIZ-BIZ  (International) (13 Mar 2014 - 14 Mar 2014)
  5. ENVIRONMENTAL FRIENDLY COATING MATERIALS FROM PALM OIL DERIVATIVES, INTERNATIONAL SYMPOSIUM ON ADVANCED POLYMERIC MATERIALS ISAPM2012 di SUNWAY RESORT HOTEL,SUBANG JAYA, SELANGOR PADA 09 JUL 2012 HINGGA 12 JUL 2012 , Institute of Materials Malaysia (International) (07 Jul 2012 - 12 Jul 2012)
  6. THE IMPORTANCE OF CHEMISTRY IN OUR LIFE - GAN Seng Neon , The International Year of Chemistry 2011 (IYC 2011), Jabatan Kimia, UM (National) (06 Jul 2011 - 06 Jul 2011)
  7. Environmental Friendly Palm Oil-Based Coating Resins Seng-neon Gan*, Shahla Ataei and Teck-chye Ang , The 2nd Federation of Asian Polymer Societies Polymer Congress, FAPS PC2011 , Polymer Division, Chinese Chemical Society  (International) (08 May 2011 - 11 May 2011)
  8. Converting palm oil-based polyols into light curable acrylic resins as dental restorative material, Seng Neon Gan*, Noor Hayati Abu Kasim and Fadhel Alsanabana , 2nd International Conference on Biobased Polymers (ICBP2009) , USM, University of Tokyo & RIKEN, Japan (International) (11 Nov 2009 - 14 Nov 2009)
  9. POLYMERIC MATERIALS FROM PALM OIL AND THEIR APPLICATIONS, The 1st FAPS Polymer Congress, Polymer Future for Sustainable Society , The Society of Polymer Science, Japan, Supported by: The Federation of Asian Polymer Societies (International) (20 Oct 2009 - 23 Oct 2009)
  10. Palm oil-based solvent, an environmentally friendly alternative for inks, Chinacoat 2006, Chinacoat 2006, sponsored by Mewahcoat Sdn Bhd (International) (09 Nov 2006 - 09 Nov 2006)
  11. Recent developments of palm oil based polyurethanes, The Malaysian Science and Technology Congress 2006,, COSTAM (International) (20 Sep 2006 - 20 Sep 2006)
  12. Toner Resins and Chemical Toners, Asia Imaging Materials Conference, 29 June-2 July, 2006, Organized by Asia Imaging Forum (International) (30 Jun 2006 - 30 Jun 2006)
  13. Introduction to Toners and Chemical Toners, JADI - Opening Ceremony of new plant in China, JADI Imaging Technologies Sdn Bhd (International) (25 Apr 2006 - 25 Apr 2006)
  14. Palm kernel oil polyols for the production of polyurethane foams and adhesives, PIPOC 2005 - International Palm Oil Congress,25-29 September 2005, Malaysian Palm Oil Board (International) (29 Sep 2005 - 29 Sep 2005)
  15. Polyols from palm kernel oil for rigid polyurethane foams, Utech 2005, The International Polyurethanes Conference & Exhibition for Asia Pacific, Urethane Technologies (International) (14 Apr 2005 - 14 Apr 2005)
  16. Flexible polyurethane foams from palm kernel oil, Oils and Fats International Congress OFIC 04 / World Oleochemicals Conference 29 Sept Oct 2,2004, Malaysia Palm Oil Board (International) (02 Oct 2004 - 02 Oct 2004)
ORAL PRESENTER
  1. Synthesis of Chromium(III) Based Ziegler-Natta Catalyst And Their Use in Olefin Polymerization - Wong Jun Xuan*, Gan Seng Neon and Rosiyah Yahya , Malaysia Polymer International Conference, Polymer Research Centre (International) (21 Oct 2009 - 22 Oct 2009)
  2. Copolymerization of oleic acid-based macromer with methyl methacrylate - Shahla .Ataei*, Rosiyah Yahya and Gan S.N. , Malaysia Polymer International Conference (MPIC) , Polymer Research Centre (International) (21 Oct 2009 - 22 Oct 2009)
  3. Preparation of Styrene Acrylic Copolymers for Toner Resins by Suspension Polymerization, Tang Bee Kim, Gan Seng Neon and Rosiyah Yahya , Malaysia Polymer International Conference (MPIC), Polymer Research Centre (International) (21 Oct 2009 - 22 Oct 2009)
  4. Construction of electrospinning set up for micron and nano polymeric fiber mats, Pedram Azari1*, Gan Seng Neon,Rosiyah Yahya, Wong Chiow San , Malaysia Polymer International Conference (MPIC), Polymer Research Centre (International) (21 Oct 2009 - 22 Oct 2009)
  5. Mechanical properties of a new resin system based on BP-UDMA -F. ALSANABANI, N.H. ABU KASIM, and S.N. GAN , 2nd Meeting of IADR Pan Asian Pacific Federation (PAPF) and the 1st Meeting of IADR Asia/Pacific Region (APR) (Sept. 22-24, 2009) , International Association for Dental Research (International) (22 Sep 2009 - 24 Sep 2009)
  6. Environmental friendly palm oil- based toner resin for laserjet printers and photocopy machines (Gold Medal), 20th International Invention, Innovation, Industrial Design & Technology Exhibition 2009 (ITEX2009), Malaysian Invention and Design Society (MINDS) (International) (15 May 2009 - 17 May 2009)
POSTER PRESENTER
  1. POLYURETHANE FOAMS AND ADHESIVES FROM PALM OIL (POSTER), ASSOCIATION OF UNIVERSITY TECHNOLOGY MANAGERS (AUTM) ASIA 2015 -TECHNOLOGY TRANSFER IN A GLOBAL ECONOMY , Malaysian Technology Development Corporation Sdn Bhd (International) (06 Apr 2015 - 09 Apr 2015)
  2. Converting PET Bottles Chemically to Polyols for Rigid Polyurethane Foams - Asmalina M.D., Rosiyah.Y., Gan S.N. (Bronze Medal), Percipta 2009, MOHE & UM (National) (08 Oct 2009 - 10 Oct 2009)
  3. Environmental friendly natural oil-based toner resin, EKSPO HARTA INTELEK 2009 BERSEMPENA HARI HARTA INTELEK NEGARA 23-26 APRIL 2009 , Ministry of Domestic Trade and Consumer Affairs (National) (23 Apr 2009 - 26 Apr 2009)
  4. BACTERIAL POLYHYDROXYALKANOATES:Production from Palm Oil, and Applications - Irene K.P.TAN1, Seng-Neon GAN2, M. Suffian M. ANNUAR1, Siew-Tin ONG3, Chong-Huat SIAR4 , BioMedical Asia 2009, Terapinn Singapore, sponsored by A-Star Exploit Technologies and others (International) (16 Mar 2009 - 19 Mar 2009)
  5. A Novel Resin System Based On Palm Oil Polyol For Dental Composites - Noor Hayati Abu Kassim, Gan Seng Neon et al. , Malaysia Technology Expo MTE 2009, MOSTI, MOHE and MOA (National) (19 Feb 2009 - 20 Feb 2009)
  6. A novel polymer for application in restorative dentistry (Booth 144B - Gold Medal) - Noor Hayaty Binti Abu Kasim, Gan Seng Neon, Fadhel Ali Abdulleh Alsanabani, Zamri Bin Radzi, Noor Azlin Bt Yahya, Nor Himazian Binti Mohamed , EKSPO PENYELIDIKAN, REKACIPTA & INOVASI UM 2009, IPPP, UM (University) (13 Jan 2009 - 15 Jan 2009)
  7. Synthesis and Characterization of New Polyurethane Foams from liquid natural rubber, ICMC International Conference on Molecular Chemistry 2008 (01 Mar 2008)
  8. Fluxural Strength of PMMA Modified with Palm-oil Based Polyol, International Association of Dental Research General Session (01 Mar 2008)
  9. Conversion of a New Monomer for Dental Resin Application, International Association for Dental Research South East Asian Division22nd Annual Scientific Meeting (01 Mar 2008)
  10. Modification of PMMA Dental Resin with Palm Oil Based Polyol, International Association for Dental Research South East Asian Division22nd Annual Scientific Meeting (01 Mar 2008)
  11. Azlina Puang, Gan Seng Neon, and Rosiyah Yahya, Alkyds from Capelin fish oil , Asia Chemical Congress (ACC2007), IKM (23 Aug 2007 - 25 Aug 2007)
  12. Tan Saw Hong, Mohd Jamil Maah and Gan Seng Neon, Ziegler-Natta polymerization of ethylene and propylene using chromium catalyst synthesized from chromium(III) acetate complexes , , Asia Chemical Congress (ACC2007), IKM (23 Aug 2007 - 25 Aug 2007)
  13. Choong Dick Hean, Hattori Takayuki, Gan Seng Neon and Lee Siang Yin, A Study of Vegetable Oil based Alkyd Resin as a tackifier of rubber compound , Asia Chemical Congress (ACC2007), , IKM (23 Aug 2007 - 25 Aug 2007)
  14. Lee Siang Yin, Gan Seng Neon* , Irene K.P.Tan, and Aziz Hassan, Modification of Epoxidized Natural Rubber by Polyhydroxyalkanoates , Asia Chemical Congress, (ACC2007), IKM (23 Aug 2007 - 25 Aug 2007)
  15. Takayuki Hattori, Choong Dick Hean, Gan Seng Neon and Lee Siang Ying A study of alkyd resin synthesized by using the vegetable oil as a tackifier of rubber compound , , 15th Polymer Material Forum, Society of Polymer Science of Japan (International) (16 Nov 2006 - 17 Nov 2006)
PRESENTER
  1. Microcapsules for Self-healing Dental Material (Gold Medal), 21th International Invention, Innovation & Technology Exhibition, ITEX2010 , MINDS (International) (14 May 2010 - 16 May 2010)
  2. ANALYSIS OF EMULSION PAINTS BY FTIR AND TGA, Conference on Materials Characterization, Perkin Elmer, Perkin Elmer (12 Aug 2008 - 12 Mar 2009)
  3. APPLICATIONS OF FTIR IN POLYMER RESEARCH & PROBLEM SOLVING, Workshop on MOLECULAR & THERMAL CHARACTERIZATIONS, Jointly organized by IKM & UM (08 May 2008 - 09 Mar 2009)
  4. APPLICATIONS OF TGA FOR PROBLEM SOLVING AND QUALITY CONTROL , Workshop on MOLECULAR & THERMAL CHARACTERIZATIONS, IKM & UM (08 May 2008 - 09 Mar 2009)
  5. STUDY OF ETHYLENE POLYMERIZATION BY THE AGITATED DRY PHASE REACTOR - Proceedings of Conference on Advances in Petrochemicals and Polymers, ICAPP 2007, Conference on Advances in Petrochemicals and Polymers, ICAPP 2007, The Petroleum and Petrochemical College, Chulalongkorn University  (International) (25 Jun 2007 - 28 Jun 2007)
  6. Proceedings Asia Imaging Materials,AIF 2006, Asia Imaging Materials,AIF 2006 (01 Mar 2006)
  7. POLYMERIC MATERIALS FROM PALM OIL INDUSTRY, The Second Mathematics and Physical Science Graduate Conference (MPSGC2006), NUS, Singapore (International) (01 Mar 2006)
  8. PALM OIL-BASED POLYURETHANE , Proceedings VI-National symposium for polymeric materials (National) (01 Mar 2006)
  9. Recent developments of palm oil based polyurethanes, Malaysian Science and Technology Congress MSTC2006 (01 Mar 2006)
  10. Palm oil-based solvent, an environmentally friendly alternative for inks, Exhibition Seminar, Chinacoat 2006 (01 Mar 2006)
  11. Polyester polyols from palm oil and palm kernel oil for flexible polyurethane foams, International Palm Oil Congress PIPOC2003, 24-28th September 03, Malaysia Palm Oil Board (International) (26 Sep 2003 - 26 Sep 2003)
  12. Environmental pollution by plastic waste, and some developments of polymeric materials from Malaysian local renewable resources, International Meeting on Recycling and Environmentally Degradable Plastics from Renewable Resources and International Exhibition on Plastic Industries Technologies, ICS-UNIDO (International) (14 Sep 2001 - 14 Apr 2005)
OTHERS
  1. Rubber nanocomposites: Recent Advances - by Prof Dr Sabu Thomas, Visiting Professor from Mahatma Gandhi University, India., CATIS 042/2013 - CHEMISTRY AND TECHNOLOGY INFORMATION SERIES 2013, Jointly organized by Chemistry Dept & IKM. , Jointly organized by Chem Dept, UM, & IKM (National) (22 Oct 2013 - 22 Oct 2013)
  2. Reactive Blends of Poly(ethylene oxide) and Functionalized Epoxidized Natural Rubber - A. Karim. W. N. a , Jin Guan Ng a , Seng Neon Gan a , Chin Han Chan b , Yahya. R a , 7th Mathematics and Physical Sciences Graduate Congress , NUS Singapore (International) (12 Dec 2011 - 14 Dec 2011)
  3. Bio-based Chemical Tonoer Prepared from Palm Oil Derivatives, 27th International Conference on Digital Printing Technology NIP27, Seiko Epso Corp, HP Company & Xerox Corp (International) (02 Oct 2011 - 06 Oct 2011)
  4. ALKYD RESIN AS A TACKIFIER IN THE FORMULATION OF NATURAL RUBBER BASED PRESSURE SENSITIVE ADHESIVES-*S.F.M. Mustafa1, SN Gan, R Yahya , The Asian Chemical Congress (14th ACC), the Chemical Society of Thailand (CST) (International) (05 Sep 2011 - 08 Sep 2011)
  5. Homopolymerization of ethylene by Ziegler Natta catalyst in the presence of natural rubber, Redzuan M., Gan S.N., Yahya R. , The Asian Chemical Congress (14th ACC), The Chemical Society of Thailand (CST) (International) (05 Sep 2011 - 08 Sep 2011)
  6. MEDIUM-CHAIN-LENGTH POLYHYDROXYALKANOATES AS ECO-FRIENDLY PLASTICIZER FOR POLY(VINYL CHLORIDE) Mei Chan Sin1*, Seng Neon Gan, Mohd Suffian Mohd Annuar, Irene Kit Ping Tan, 12th APRU Doctoral Students Conference, Tsinghua University, Beijing, China  (International) (04 Jul 2011 - 07 Jul 2011)
  7. NEW TECHNOLOGY TO MANUFACTURE FISH OIL POLYOL FOR RIGID POLYURETHANE FOAMS , Percipta 2009, The Ministry of Higher Education (MoHE) & UM (National) (08 Oct 2009 - 10 Oct 2009)
  8. A study of alkyd resin synthesized from vegetable oil and aliphatic polybasic acid as a tackifier of rubber compound- Proceedings 16th Polymer Material Forum, the Society of Polymer Science of Japan, PMF2007,, 16th Polymer Material Forum, the Society of Polymer Science of Japan, PMF2007,, Polymer Society of Japan. (International) (29 Nov 2007 - 30 Nov 2007)

ACADEMIC/PROF. SERVICES

Evaluation
  1. (2024) Penal Member for Ikm Research Prize in Polymer and Materials Science 2024, National, (External Assessor)
  2. (2024) Penal Member for Ikm Research Prize in Polymer and Materials Science 2024, National, (External Assessor)
  3. (2024) Ikm Gold Medal Award 2024, National, (External Evaluator)
  4. (2024) Referee Report for Wan Nurhidayah Binti a Karim, University, (Internal Evaluator)
  5. (2024) Referee Report for Azlina Binti Puang, University, (Internal Evaluator)
  6. (2024) Synergistic Enhancing Effect of Multi-Dimensional Nanomaterials, International, (Reviewer)
  7. (2024) Preparation and Self-Healing Properties of Epoxy Vitrimer Materials Based On Imine, International, (Reviewer)
  8. (2023) Ikm Research Prizes 2023, National, (External Assessor)
  9. (2023) Journal of Rubber Research, International, (Reviewer)
  10. (2023) Recommendation Letter for Promotion to Associate Prof, University, (Internal Evaluator)
  11. (2023) Journal of Applied Polymer Science, International, (Reviewer)
  12. (2023) The Effect of Polyaniline’S Morphology On Photodegradation of Reactive Black 5 Dyes, National, (External Examiner)
  13. (2023) Member of Asm Vetting Committee - 2023, National, (External Evaluator)
  14. (2023) The Effect of Polyaniline’S Morphology On Photodegradation of Reactive Black 5 Dyes, National, (External Examiner)
  15. (2023) Frgs 2034 April - Phang Sooi Wai, National, (External Evaluator)
  16. (2022) Journal of Applied Polymer Science, International, (Reviewer)
  17. (2022) Multifunctional Isocyanates from Plant-Based Castor Oil: Application and Comparison as Waterborne Additives, International, (Reviewer)
  18. (2022) Jrur-D-21-00096, "The Effect of Calcium Carbonate On The Cross-Link Concentrations and Surface Morphology of Natural Rubber Latex Films", International, (Reviewer)
  19. (2020) Journal of Rubber Research: JRUR-D-20-00044, "Effect of silane coupling agent pretreatment on the properties of prevulcanized natural rubber-bonded rice straw particle board". , (Reviewer)
  20. (2020) Review, report and make recommendation= ManuscriptL : Exploration of Repressional Factors in Waterborne Polyurethane Pressure Sensitive Adhesives , (Reviewer)
  21. (2020) Polymers and Materials Section : Attend meetings and activities, , (Scientific Committee)
  22. (2020) NOVEL DEVELOPMENT OF GREEN POLYMER ELECTROLYTE USING GRAFTED RUBBER/POLYANILINE (PAni)/CARBOXYMETHYL CELLULOSE (CMC), MSc Thesis, TARUC , (External Examiner)
  23. (2020) Editorial Board Member of Journal of Rubber Reearch , (Editor)
  24. (2020) Reviewing - Journal of Vinyl and Additive Technology: manuscript VNL-20-043.R1 , (Reviewer)
  25. (2020) Reviewing - Journal of Applied Polymer Science app.20201342 :"Exploration of Repressional Factors in Waterborne Polyurethane Pressure Sensitive Adhesives" , (Reviewer)
  26. (2020) Journal of Applied Polymer Science, Photocatalytic degradation and heat reflectance recovery of water-borne acrylic polymer/ZnO nanocomposite coating, app.20193043 , (Reviewer)
  27. (2020) Review manuscript to Malaysian Journal of Scirnce:submission, " Additive for Cellulose Acetate Membrane from Coconut Sap in Desalination Application," , (Reviewer)
  28. (2020) Review of manuscriptL "Exploration of Repressional Factors in Waterborne Polyurethane Pressure Sensitive Adhesives" (No. app.20201342). JAPS. , (Reviewer)
  29. (2020) Review manuscript ; JRUR-D-20-00004, "EFFECT OF DENSITY PARAMETER IN A DISC MADE OF ORTHOTROPIC MATERIAL AND RUBBER". , (Reviewer)
  30. (2019) Manuscript to JCTR :JCTR-D-19-00523 , (Reviewer)
  31. (2019) Review of RA-ART-05-2019-003656, Manuscript :Branched EHNBR and Its properties with Enhanced Low-Temperature Performance and Oil Resistance, RSC Advance. : , (Reviewer)
  32. (2019) Laporan Penilai Luar - Prof. Madya Dr. Khairiah Badri, UKM , (External Examiner)
  33. (2019) Penilai kuar bagi urusan kenaikan pangkat Profesor Gred C Universiti Teknologi MARA , (External Examiner)
  34. (2019) Polymer & Materials Section, meetings and activities. , (Scientific Committee)
  35. (2018) Mohamad Wafiuddin Ismail_(G1321379) / P_BSC Ph.D. Thesis :Synthesis of Star-shaped Polycaprolactone-Polyethylene Glycol Block Copolymer as Polymeric Hydrogel for Drug delivery , (External Examiner)
  36. (2017) PELANTIKAN SEBAGAI PANEL PEMANTAU BAGI MESYUARAT PEMANTAUAN PROJEK SCIENCEFUND (Material Chemical & Physical Sciences) 24 MEI 2017 (Material Chemical & Physical Sciences), (Scientific Committee)
  37. (2016) INTERNAL EXAMINER TO PhD THESIS - Zeeshan Qamar (DHA130009), (Internal Examiner)
  38. (2016) INTERNAL EXAMINER TO Ph.D. THESIS - SYED SHAHABUDDIN (SHC130038), (Internal Examiner)
  39. (2016) External Examiner to PhD thesis : Lim Keuw Wei (P62231), UKM, (External Examiner)
  40. (2016) Manuscript to Malaysian Journal of Science, MJS 33/2016/B, (Reviewer)
  41. (2016) Panel Penilai Jemputan : Geran Sciencefund MOSTI kitar 2/2016, (Reviewer)
  42. (2016) Review manuscript JRubbRes-D-16-00012, (Reviewer)
  43. (2016) Esteemed Member of the Panel of Judges at ITEX2016, judging exhibition projects at ITEX 2016, (Scientific Committee)
  44. (2016) Panel Penilai Jemputan - Skim Geran FRGS Fasa 1/2016 KPT, (Reviewer)
  45. (2015) Polyuret hane/ Oil Palm Frond Biocomposit e Foam" (PPC-UKM-03)Polymers and Polymer Composit (PPC) , (Reviewer)
  46. (2015) Manuscript ID: JST-0563-2015, Journal of Science and Technology , (Reviewer)
  47. (2015) Pertanika-Journal of Science and Technology,Manuscript Title: Effect of silica filler on viscosity, peel strength and shear strength of styrene butadiene rubber based adhesives. Manuscript ID: JST 0563 2015 , (Reviewer)
  48. (2015) Examiner to Candidature Deference at Chemistry Department, 18-11-2015 at K017 Block B - 2 projects. , (Internal Examiner)
  49. (2015) Research Article 168485 titled "Mechanical and electrical properties of styrene-isoprene-styrene copolymer doped expanded graphite nanoplatelets," Journal of Nanomaterials , (Reviewer)
  50. (2015) Ms. Ref. No.: POC-D-14-00310R1 Title: The Performances of Biodegradable Tung Oil Coatings Progress in Organic Coatings, (Reviewer)
  51. (2015) Manuscript ID PRT-11-2014-0107 for the Pigment & Resin Technology: The international journal of colorants,polymers and colour applications, (Reviewer)
  52. (2015) Ref.: Ms. No. JRubbRes-D-15-00022 Viscosity and adhesion properties of natural rubber based adhesive.JOURNAL OF RUBBER RESEARCH, (Reviewer)
  53. (2015) Ms. Ref. No.: POC-D-14-00558 Title: High Bio-based content waterborne UV-curable coatings with excellent adhesion and flexibility Progress in Organic Coatings, (Reviewer)
  54. (2015) Manuscript JCTR-D-15-00457 for Journal of Coatings Technology and Research: Preparation and characterization of ultraviolet (UV) radiation curable resin from palm oil. , (Reviewer)
  55. (2015) rogress in Organic Coatings, Ms. Ref. No.: POC-D-14-00558R1 Title: High Bio-based content waterborne UV-curable coatings with excellent adhesion and flexibility , (Reviewer)
  56. (2015) Assessor to candidature defence of PhD project(Dr Zeeshan Qamar) held on 18th December 2015 at Balai Ungku Aziz, Fakulti Pergigian , (Internal Examiner)
  57. (2015) Penilai Luar Untuk Kenaikan Pangkat Ke Jawatan Profesor - Prof. Madya Dr. Khairiah Badri Pusat Pengajian Sains Kimia dan Teknologi Makanan , (External Examiner)
  58. (2015) Internal Examiner to M.Ph. thesis entitled: "Synthesis of coated iron oxide nanoparticles as an additive for nitrile butadiene rubber (NBR) film" by Ong Hun Tiar (HGA130012) , (Internal Examiner)
  59. (2015) Reviewer for Book Chapter, Advances in Polymers and Composites Research, IMPEDANCE SPECTROSCOPY: A PRACTICAL GUIDE TO EVALUATE PARAMETERS OF NYQUIST PLOT FOR SOLID POLYMER ELECTROLYTE APPLICATIONS, (Reviewer)
  60. (2015) Lantikan Sebagai Penilai Pakar Untuk Kenaikan Pangkat Ke Jawatan Profesor VK7 - Prof. Madya Dr. Azizan Ahmad Pusat Pengajian Sains Kimia dan Teknologi Makanan, (External Examiner)
  61. (2015) Ref.: Ms. No. JRubbRes-D-14-00039, Sulfurless system for carboxylated acrylonitrile butadiene (nitrile) latex films & its cytotoxicity properties JOURNAL OF RUBBER RESEARCH, (Reviewer)
  62. (2015) THE 26th INTERNATIONAL INVENTION INNOVATION & TECHNOLOGY EXHIBITION (ITEX 2015), 21-23 May 2015, KLCC., (Advisory Committee)
  63. (2015) Reviewer to Journal of Polymer and Polymer Composites - Manuscript: "Polyuret hane/ Oil Palm Frond Biocomposit e Foam" (PPC-UKM-03) , (Reviewer)
  64. (2015) SIRIM Berhad as the Standards Development Agency (SDA) appointed by STANDARDS MALAYSIA, would like to have the feedback from you for the following: Draft MS MS to be withdrawn, (Scientific Committee)
  65. (2015) Journal of Science and Technology, manuscript # JST-0563-2015.R1 entitled "Effect of silica filler on viscosity, peel strength and shear strength of styrene-butadiene rubber-based adhesives." , (Reviewer)
  66. (2015) Manuscript ID: PRT-11-2014-0102 Title: Investigation on the modification to solvent-containing two-component polyurethane coating by carbon nanotubes Editor-in-C hief: Lin, Long, (Reviewer)
  67. (2015) Ref.: Ms. No. JRubbRes-D-15-00028 Effect of MAH-g-PP on Performance of Flame Retardant NR/PP Thermoplastic Vulcanizates JOURNAL OF RUBBER RESEARCH, (Reviewer)
  68. (2015) Panel of judges for IKM RSC Best Polymer Thesis Award 2015 sponsored by Synthomer, (Advisory Committee)
  69. (2015) Internal Examiner to PhD thesis by Kaviaraja Pandian A/L Sambasevam (SHC110019) - "Synthesis and characterization of polyaniline for hydrazine detection", (Internal Examiner)
  70. (2015) Manuscript to Journal of Rubber Research, Ref.: Ms. No. JRubbRes-D-15-00022, Viscosity and adhesion properties of natural rubber based adhesive. , (Reviewer)
  71. (2015) Reviewing manuscript # JST-0563-2015 entitled "Effect of silica filler on viscosity, peel strength and shear strength of styrene-butadiene rubber-based adhesives." for the Journal of Science and Technology., (Reviewer)
  72. (2014) Presentation of thesis evaluation at PhD Viva - Tan Hui Hui at USM, (External Examiner)
  73. (2014) Internal Examiner to Ang Khoon Poh (SGR090103) - Synthesis of Plam oil-based polyol and evaluation of polyurethane adhesives , (Internal Examiner)
  74. (2014) Manuscript to Progress in Organic Coatings, Synthesis of Fast Drying Long Oil Alkyd Resins Using Seed Oil of Karawila (Momordica Charantia) , (Reviewer)
  75. (2014) Manuscript to Progress in Organic Coatings, Design, Preparation and Properties of Novel Renewable UV-curable Copolymers Based on Cardanol and Dimer Fatty Acids , (Reviewer)
  76. (2014) Journal of Coatings Technology and Research -manuscript JCTR-D-14-00061, (Reviewer)
  77. (2014) Reviewer to manuscript JRubbRes-D-14-00009 : Chemical depolymerization of natural rubber latex in acidic medium catalyzed by CoCl2 and (NH4)2Fe(SO4)2, (Reviewer)
  78. (2014) reviewing manuscript # JCM-13-0939.R2 entitled "Production of black toner through emulsion aggregation of magnetite, carbon black and styrene-acrylic co-polymer: investigation on the effect of variation in components" for the Journal of Composite Materials., (Reviewer)
  79. (2014) Penal Member for Performance Evaluation of High Impact Research (HIR) Projects of the Faculty of Science , (Scientific Committee)
  80. (2014) Synthesis, Characterization and Application of Conducting Polymer for Microwave Absorption, M.Sc. thesis by Koh Yen Nee., (Internal Examiner)
  81. (2013) UKM, Ph.D.Thesis by Teh Chin Hoong: SINTESIS DAN PENCIRIAN OLIGOMER TERBITAN TIOFENA-FENILENA UNTUK KEGUNNAN DIOD PEMANCAR CAHAYA , (External Examiner)
  82. (2013) Elucidating the structure and metabolism of an endosome-specific lipid, bis(monoacylglycerol) phosphate, by Tan Hui Hui, USM, (External Examiner)
  83. (2013) Penhasilan poliester terbiodegradasi deripada tandan kosong kelapa sawit melalui pempolmeran berenzim, oleh Satriani Aga Pasma, Sarjana Sains, (External Examiner)
  84. (2013) UKM PhD :SINTESIS DAN PENCIRIAN OLIGOMER TERBITAN TIOFENA- FENILENA UNTUK KEGUNNAN DIOD PEMANCAR CAHAYA OLEH TEH CHIN HOONG , (External Examiner)
  85. (2012) Supervisor and Internal Examiner for Industrial Training, Semester Khas, Sesi 2012/13, (Internal Examiner)
  86. (2012) UKM MSc Thesis : PENYEDIAAN BUSA POLIURETANA FLEKSIBEL BERPERENCAT API BERDASAKAN MINYAK ISIRUNG KELAPA SAWIT TEREPOKSIDA. OLEH NURUL AIN BINTI HANZAH , (External Examiner)
  87. (2012) Reviewer for Manuscript Number JCTR-1087, Use of fluoropolymer permanent release coatings for molded polyurethane foam production, Journal of Coatings Technology and Research (JCTR) , (Reviewer)
  88. (2012) Journal of Rubber Research, (Reviewer)
  89. (2011) Reviewer for paper Electrical Conductivity of Anionic Surfactant-Doped Polypyrrole Nanoparticles Prepared Via Emulsion Polymerization Manuscript ID. JST-0339-2011 (RW01) submitted to Pertanika, Aug 2011., (Reviewer)
  90. (2011) Reviewer for research paper APP-2011-02-0646, New Route to Monodispersed Amphiphilic Core-Shell Polymer Nanoparticles: Polymerization of Styrene from α-Methylstyrene-Containing Macroinitiator, J.Appl Polym Sci., (Reviewer)
  91. (2011) External Examiner to PhD Thesis of Steven Spoljaric (Title : Functionalised polymer nanocomposites and blends), RMIT, Australia, Nov 2011., (External Examiner)
  92. (2011) Internal Examina to PhD Thesis of Norli Abdullah (Title: Design of Bio-supported Nanostructure: Synthesis Parameter), IPS, UM, March 2011., (Internal Examiner)
  93. (2011) External Examiner to PhD Thesis of Nanthini Sridewi a/p Appan (Title: Fabrication, Characterization and Application of Polyhydroxybutyrate-Titanium Dioxide Nanocomposite Materials), USM, Nov 2011., (External Examiner)
  94. (2011) Journal of Rubber Research, (Reviewer)
  95. (2010) M.Sc.Thesis, Thermal Properties and Morphologies of Poly(ethylene terephthalate) in Blends with ENR, by Siti Farehah Suliman, (External Examiner)
  96. (2010) Sub-editor & referee to Journal of Rubber Research , (Sub-editor & reviewer )
  97. (2009) ASM Science Journal , (Reviewer)
  98. (2009) SQU Journal for Science , (Reviewer)
  99. (2009) Stability and encapsulation of Cattleya bowringiana extracts in alginate beads (Ruj:600-PPSis(9/6/5)),Noor Hafizah Abdullah, UiTM, 2009 , (External Examiner)
  100. (2009) M.Sc.Thesis:"USE OF ALIPHATIC PERFLUORO AND NANO TITANUM DIOXIDE(TiO2) COATING IN CONSERVATION OF METAL ARTEFACTS , (External Examiner)
  101. (2008) "UTILIZATION OF GUAVA SEEDS AS A SOURCE OF ACTIVATED CARBON FOR REMOVAL OF METHYLENE BLUE FROM AQUEOUS SOLUTION" BY I.A.RAHMAN AND B.SAAD, Malaysia Journal of Chemistry, Institut Kimia Malaysia, 2008 , (Reviewer)
  102. (2007) Joournal of Waste Management and Research (WMR) , (Reviewer)
  103. (2007) Thesis: "BIODEGRADATION STUDIES ON PLASTIC WASTE Master of Technology:Suhaila Mohd Omar, 2007 , (Internal Examiner)
  104. (2007) Journal of Rubber Research , (Editor)
  105. (2007) Journal of Applied Polymer Science , (Reviewer)
  106. (2006) "DYNAMICS INTERFACIAL STUDY OF EMULSION STABILIZED BY GLYCOLIPID SURFACTANT AT OIL-WATER INTERFACE M.Sc.Thesis:Tham Kok Chun (HGAZ01011),2006 , (Internal Examiner)
  107. (2006) Time-Temperature-Composition Response of Emulsion Polymerized Polyacrylate Pressure Sensitive Adhesives (PSA). Mark D. Gower,Ph.D.RMIT,Australia, 2006 , (External Examiner)
  108. (2004) Conformation and Solbility of Polyacrylamide and Its N-alkyl Modified Analogues, Shuhui Wu, Ph.D.,RMIT, Australia, 2004 , (External Examiner)
  109. (2002) "PALM OIL EMULSION FORMATION AND ITS APPLICATION TO NATURAL RUBBER LATEX DIPPED- PROCESSING KAUSAR BINTI AHMAD, Ph.D., 2002 , (Internal Examiner)
  110. (1999) "SYNTHESIS OF ALKYLANILINES AND ALKYLHETEROCYCLES OVER ION-EXCHANGED ZEOLITES , NIDHY RAM MOHAN, M.Phil.Degree, 1999 , (Internal Examiner)
  111. (1994) "PENCIRIAN TAPAK AKTIF MANGKIN METATESIS HETEROGEN BERASASKAN Re2O7/Al2O3" OLEH EN. MUSTAFFA BIN HJ.ABDULLAH (A2108), M.Sc.,UKM, 1994 , (External Examiner)
  112. (1993) "METHANOLYSIS OF GLYCEROL ESTERS OF PALMITIC ACID USING DIORGANOTIN(IV) ALKOXIDES AS ATALYSTS"CHAI HON YEAN, M.Sc. 1993 , (Internal Examiner)
Contribution to external organisation
  1. (2023) Member of Vetting Committee for Chemistry Discipline 2023, National, (Technical Advisor)
  2. (2018) The Chiba University University of Malaya Student Workshop in University of Malaya, Chiba University Graduate School of Science and Engineering Department of Materials Sciences 1-33, Yayoi-cho, Inage-ku, Chiba, 263-8522 Japan , International
  3. (2018) Organized Seminar for Visiting Professor Shigeru TAKAHARA , Department of Materials Science,Graduate School of Scienceand Engineering,Chiba University, 1-33 Yayoi-cho, Inage-ku, Chiba 263-8522, Japantakahara@faculty.chiba-u.jp, International
  4. (2018) Editorial Board Member of Journal of Rubber Research, Rubber Research Institute of Malaysia, Malaysia Rubber Board
  5. (2017) Organized The Chemistry and Technology Information (CARTIS) seminar - 8th Dec 2017, IKM - Jabatan Kimia,UM, National
  6. (2016) Scientific Exchange Program, Chiba University, International
  7. (2016) Invited speaker, International Symposium on Advanced Polymeric Materials (ISAPM2016), International
  8. (2016) Keynote Speaker, International Symposium on Coatings and Corrosion 2016(ISCC2016), International
  9. (2016) Invited speaker to EMN Biomaterials 2016, EMN Biomaterials, International
  10. (2016) Invited speaker #111 Chemistry-RSC Symposium, Chemistry Department, UM, University
  11. (2016) Promation and development of Materials Sciences, Technology and Engineering, Institute of Materials, Malaysia
  12. (2016) Member of Penal of Judges for the selection of RSC-IKM Best Ph D thesis in Polymer Chemistry for award in 2016, Institut Kimia Malaysia
  13. (2016) AJK PENILAI HARTA INTELEK, UNIVERSITY OF MALAYA
  14. (2015) Identified common interests in developing applications of dihydroxyl acetone with research group of Prof. Yu-Guo Zheng Professor of Biochemical Engineering Zhejiang University of Technology., Biochemical Engineering Zhejiang University of Technology., International
  15. (2015) Received Prof Zheng, Prof Hu and Prof Xu from Zhejiang University of Technology for further discussion on setting up MOU, in August-Sept 2013., Department of Biochemical Engineering Zhejiang University of Technology, China, International
  16. (2015) ISAPM2016 Symposium International Advisory Committee Member, Institute of Materials Malaysia, International
  17. (2015) Guest Professor of Zhejiang University of Technology, Zhejiang University of Technology, China, International
  18. (2015) Collaborative research with Prof Shigeru Takahara, Japan, Graduate School of Advanced Integration Science, Chiba University , International
  19. (2015) 4FAPS-IPC 2015:: Chairing a Session:Technical Session: Polymer Education & Lignocellulosic-based polymers Venue: Bilik Melaka Date: Thursday, 8 October 2015 Time: 0900, Institut Kimia Malaysia, International
  20. (2015) Key Note Speaker to ISCC 16-19 May 2016, PWTC, KL, Institute of Materials Malaysia, International
  21. (2015) Consultant, Toyochem Specialty Chemicals Sdn Bhd, National
  22. (2015) Chairing POLYMER EDUCATION session of 4FAPS-International Polymer Conference on 8-10-2015 at Bilik Melaka, PWTC, Institut Kimia Malaysia
  23. (2015) Organizing committee member in IMTCE2016 and Symposium International Advisory Committee to ISAPM2016., Institute of Materials, Malaysia
  24. (2015) Committee Member for "THESIS IN THE FORMAT OF PUBLISHED PAPERS", Jabatan Kimia, UM
  25. (2014) Keynote Speaker, International Symposium on Advanced Polymeric Materials (ISAPM2014)
  26. (2014) Committee Member of DSM/NMC/ISC-B/WG16-4 "Material Specifications", DSM, Department of Standards Malaysia
  27. (2013) Key Note Speaker to International Symposium on Advanced Polymeric Materials (ISAPM 2014), 13-16 May 2014, PWTC, KL, Institute of Materials Malaysia, International
  28. (2013) Invited speaker to the 9th Mathematics and Physical Science Graduate Congress 2014 (8-10 Jan 2014, UM), Faculty of Science, University of Malaya, International
  29. (2013) Invited Prof Zheng Yuguao and Prof Zhu Qing of Zhejiang University of Technology to visit, present talk, visit our laboratory and discuss about collaboration, April 2013, Zhejiang University of Technology Hangzhou, Zhejiang China, 310014, International
  30. (2013) Mini symposium between Chiba University & Chemistry Department,U.M. - Presentations of R&D works on both side, research lab visits, & discussions on potential areas for future collaboration., Chiba Uninversity, Yayoicho, Inageku, Chiba, Japan - Represented by Dr Shigeru Takahara, Dr Kazuki Nakamura, and Dr Shoko Imaizumi, International
  31. (2013) Invited Speaker: Some Cases of GPC Applications in Polymer Research & Problem Solving", Gel Permeation Chromatography Workshop, 9 April 2013, Jointly organized by IKM, Lab Science Solution & UPM
  32. (2013) Water-Reducible Acrylic for Coating natural rubber & nitrile rubber gloves, CCM Chemicals Sdn. Bhd. (Company Registration No.159498-A),13th Floor, Menara PNB, No 201-A, Jalan Tun Razak, 50400 Kuala Lumpur
  33. (2013) Supervisory Committee Member, "Synthesis and formulation of palm kernel oil-based alkyd emulsions for topical application", a research project in Medical & Health Sciences , International Medical University Malaysia
  34. (2013) Manufacturing of Polyol from Fish Oil and Palm Oil for the Production of Polyurethane. , ECOTHERM SDN BHD ( Company No: 214353-D) , having its office address at Lot 2782, Kampung Baru Sungai Buloh, 47000 Sungai Buloh
  35. (2012) Invited lecturer, Changchun Institute of Applied Chemistry , International
  36. (2012) Invited speaker to the 1st International Symposium on Polymer Ecomaterials (PEM 2012) from August 19 to August 23, 2012, in Changchun Institute of Applied Chemistry,, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, 5625 Renmin Street Changchun 130022, China, International
  37. (2012) Technical consultant to the manufacturing of palm oil-based toner resin, Jadi Imaging Technologies Sdn Bhd, Kapar, Klang
  38. (2012) Modification of nitrile latex with palm oil-based additives, Hartalega Sdn Bhd
  39. (2011) Invited speaker to The 2 nd FAPS Polymer Congress (FAPS-PC2011) held at the China National Convention Center (CNCC), Beijing, China on May 8-11, 2011. , POLYMER DIVISION, CHINESE CHEMICAL SOCIETY,P.O. Box 2709, Beijing 100080, China, International
  40. (2011) Intensive Training for selected students to 43rd International Chemistry Olympiad (IChO 2011), IKM/UM
  41. (2010) Member of Organizing Committee, Rheology Workshop, 22-24 November 2010, Holiday Inn, Kuala Lumpur, Institut Kimia Malaysia & Research Instruments
  42. (2010) Technical consultant to the development of palm oil-based binder for fibreboards, Emery Oleochemicals(M) Sdn Bhd
  43. (2009) Invited speaker to the st FAPS Polymer Congress, held from Tuesday, October 20 to Friday, October 23, 2009 in Nagoya, Japan., The Society of Polymer Science, Japan Shintomicho Bldg. 3-10-9 Irifune, Chuo-ku, Tokyo 104-0042, JAPAN Fax : +81-3-5540-3737 E-mail : faps@spsj.or.jp, International
  44. (2009) Chairman of working committee on Eco-labelling criteria for adhesives and water-based adhesives (WG/Z/9-5), SIRIM., SIRIM
  45. (2009) Technical consultant on chemical safety for toy foam products, Supreme Eva Sdn Bhd, Melaka.
  46. (2009) Technical consultant to the manufacturing of palm oil-based toner resin, Jadi Imaging Technologies Sdn Bhd
  47. (2003) Treatment of Glass Surface, Nippon Electric Glass Malaysia, Shah Alam
  48. (2000) Served as committee member on standard test methods for polyolefins, SIRIM
  49. (2000) Identification and analysis of paints, Local paint companies
  50. (1998) In charge of specific instrumentations, AMCAL, University of Malaya
  51. (1996) Visiting Professor, King Mongkuts Institute of Technology Thonburi, Bangkok, Thailand, International
  52. (1996) Visiting Scientist, Polymer Centre,University of Sydney,Australia, International
  53. (1996) Served as Technical Assessor for ISO Laboratory Accreditation, Jabatan Standard Malaysia
  54. (1993) Visiting Scientist, National Science Foundation, USA, Polymer Program,PennState University, State College, PA16802, USA, International
  55. (1992) Visiting Professor, Dept of Material System Eng. Tokyo University of Agriculture and Technology, International
  56. (1989) Exchange visitor, Polymer Program,PennState University, State College, PA16802, USA, International
  57. (1983) Foreign Research, Tokyo Institute of Technology, Japan, International
  58. (1976) Post-doctorate, Centre de Recherches sur les Macromolecules,Strasbourg,France, International

SUPERVISION

Postgraduate Student
PhD/ Doctoral
  1. (2021) ENHANCED TENSILE STRENGTH AND THERMAL CONDUCTIVITY OF NATURAL RUBBER GRAPHENE COMPOSITE, LIM LAI PENG
  2. (2020) ANTICORROSION POLYURETHANE COATING DERIVED FROM POLYOL OF PALM OLEIN/RECYCLED PET AND DIISOCYANATE, Abbas Ahmad Adamu
  3. (2019) EFFECTS OF POLYTETRAFLUOROETHYLENE MICRO-PARTICLES ON MECHANICAL AND TRIBOLOGICAL PROPERTIES OF GLASS FIBER REINFORCED POLYOXYMETHYLENE, JASBIR SINGH A/L KUNNAN SINGH
  4. (2019) SYNTHESIS OF URETHANE ACRYLATE RESIN FROM PALM FATTY ACID DISTILLATE, TEO KIM TECK
  5. (2016) INVESTIGATION OF DIFFERENT DEGRADATION METHODS TO PREPARE LIQUID EPOXIDIZED NATURAL RUBBER FOR COATING APPLICATIONS, PEJVAK ROOSHENASS
  6. (2015) CALON POSTPONE REGISTRATION. VALID UNTIL 26.10.2010, PRATHAP CHANDAR MANIVANNAN
  7. (2015) ENVIRONMENTAL FRIENDLY POLY (VINYL) ALCOHOL/KENAF FIBER COMPOSITES FOR AGRICULTURAL APPLICATIONS, TAN BOON KHOON
  8. (2015) POLYMER BLENDS OF POLY(3-HYDROXYBUTYRATE-CO-3-HYDROXYHEXANOATE) AND EPOXIDIZED NATURAL RUBBER, YOGA SUGAMA SALIM
  9. (2015) MICROENCAPSULATION OF A PALM OIL-BASED ALKYD BY AMINO RESINS FOR SELF-HEALING APPLICATION, NURSHAFIZA BINTI SHAHABUDIN
  10. (2014) POLYMERIZATION OF E THYLENE BY ZIEGLER NATTA CATALYST IN THE PRESENCE OF NATURAL RUBBER, MAZWANI BT REDZUAN
  11. (2014) FABRICATION OF BIOPOLYESTER MATERIALS BY ELECTROSPINNING AS SCAFFOLDS FOR TISSUE ENGINEERING, PEDRAM AZARI
  12. (2013) SYNTHESIS OF UV CURABLE RESINS FROM PALM FATTY ACID DISTILLATE, Teo Kim Teck
  13. (2013) Reactions between palm stearin alkyds with high carboxylic acid content and epoxidised natural rubber, KHONG YOKE KUM
  14. (2012) MICROCAPSULES FOR PROPERTIES ENHANCEMENT OF COMPOSITE MATERIALS, Nurshafiza Binti Shahabudin
  15. (2012) DENTAL MATERIALS & ORTHODONTICS, Prathap Chandar Manivannan
  16. (2012) Synthesis and Modification of Palm Stearin Air Drying Alkyd Resins for Coating Applications, ALIREZA AZIMI NANVAEE
  17. (2011) Modifications of PHAs, Yoga Sugama Salim (Indonesia), SHC110030
  18. (2011) Modifications of epoxy resins with ENR, Pejvak Rooshenass, SHC100073
  19. (2011) THERMODEGRADATION OF MEDIUM-CHAIN-LENGTH POLY (3-HYDROXYALKANOATES), AND ASSESSMENT OF THE BIOPOLYESTERS AND OLIGOESTERS AS PLASTICIZER FOR POLY (VINYL CHLORIDE), SIN MEI CHAN
  20. (2011) Conversion Of Non-Self Drying Palm Stearin Alkyd Into Environmental Friendly Ultraviolet-Curable Resin, DESMOND ANG TECK CHYE
  21. (2010) SELF-HEALING POLYMERIC MATERIALS FOR POTENTIAL DENTAL APPLICATION, SONJA THEN
  22. (2010) COPOLYMERIZATION OF METHYL METHACRYLATE WITH PALM OLEIC ACID-BASED MACROMERS, SHAHLA ATAEI KACHOUEI
  23. (2010) "CNT ASA CATALYST FOR DEHYDROGNATION OF N-BUTANE", KIVAN NOSHIRVANI SHARIFABAD
  24. (2009) UV curable coatings from palm oil-based resin., Desmand Ang Teck Chye
  25. (2009) Reactions of palm oil-based alkyds with ENR, Kong Yum Kam
  26. (2009) SYNTHESIS OF URETHANE ACRYLATE MACROMER FROM PALM OIL-BASED POLYOL AND ITS APPLICATION AS A RESIN FOR DENTAL COMPOSITE, FADHEL ALI ABDULLEH ALSANABANI
  27. (2009) PHYSICAL CHARACTERIZATION OF OLEIC ACID POLYOL BASED POLYURETHANE COATINGS, THAMIL SELVI VELAYUTHAM
  28. (2009) THERMAL AND ELECTRICAL PROPERTIES OF BLENDS OF POLYACRYLATE AND POLY (ETHYLENE OXIDE) WITH AND WITHOUT LITHIUM PERCHLORATE, SIM LAI HAR
  29. (2008) Palm stearin based air drying alkyd resins, Alireza Azimi Nanvaee
  30. (2008) Nanofibers from palm oil based PU, Pedram Azari
  31. (2008) Copolymerization of MMA with palm oil based unsaturated polyesters, Shahla Ataei Kachouei
  32. (2008) Chemical modifications of bacterial PHA, Sim Mei Chan
  33. (2008) DEVELOPMENT OF A PLANAR COIL RADIO FREQUENCY INDUCTIVELY COUPLED PLASMA SYSTEM FOR MATERIAL PROCESSING, NG KIM HOOI
  34. (2008) REACTIONS OF EPOXIDIZED NATURAL RUBBER WITH PALM OIL-BASED ALKYDS AND MEDIUM-CHAIN-LENGTH POLYHYDROXYALKANOATES, LEE SIANG YIN
  35. (2007) Self healing denture materials, Sonja Then
  36. (2007) Dicarboxylic acid chromium complexes as Ziegler-Natta catalysts for polymerization of olefins, Mazwani bt Redzuan (University of Malaya (UM))
  37. (2006) Synthesis of urethane acrylate macromer from palm oil-based polyol and its application as a resin for dental composite., Fadhel AA Alsanabani
  38. (2006) SYNTHESIS OF CORE-SHELL EMULSION POLYMERS WITH FUNCTIONAL GROUPS FOR SECOND STAGE UV-CURING, CHEE SWEE YONG
  39. (2005) Water-based acrylic resins with polyelectrolyte properties, Sim Lai Har (University of Malaya (UM))
  40. (2005) Modification of natural rubber and epoxidized rubber compounds by palm kernel oil alkyds and PHAs, Lee Siang Yin (University of Malaya (UM))
  41. (2002) Physical characterization of palm oil-base polyurethane, Thamil Selvi a/p Velayutham (University of Malaya (UM))
  42. (2001) Development of a planar coil radio frequency inductively coupled plasma system for material processing, Ng Kim Hooi (University of Malaya (UM))
  43. (2000) Synthesis of core-shell emulsion polymers with functional groups for second stage UV-curing, Chee Swee Yong (University of Malaya (UM))
  44. (1990) Synthesis of some chromium complexes and their application as Ziegler-Natta catalysts, Aishah Mohd Jelan (University of Malaya (UM))
  45. (1987) Studies of Ziegler-Natta Polymerization - Characterization of tacticity of polypropylene and catalyst active centre of polymerization, Patrick Loi Suok Tee (University of Malaya (UM))
Master
  1. (2019) SYNTHESIS AND CHARACTERIZATION OF WATER-SOLUBLE POLYANILINE FOR HYDRAZINE DETECTION, HAZIRA BINTI HUSSIN
  2. (2019) SYNTHESIS OF POLYANILINE MODIFIED WITH PALM OIL-BASED ALKYD AS COUNTER ELECTRODE IN SOLAR CELL APPLICATION, MARIAM FADZLINA BINTI RAMLI
  3. (2018) CHARACTERIZATION OF POLY (LACTIC ACID) COMPOSITE REINFORCED WITH CELLULOSE AND KERATIN TREATED WITH 1-BUTYL-3-METHYLIMIDAZOLIUM CHLORIDE, KHAW YING YING
  4. (2018) PREPARATION AND CHARACTERIZATION OF ALKYD COATING WITH SELF-HEALING ABILITY, NORNADILA BINTI MOHD SAMAN
  5. (2016) PREPARATION AND CHARACTERIZATION OF BLENDS OF POLY (ETHYLENE OXIDE) AND MONOCARBOXYLIC ACID MODIFIED EPOXIDIZED NATURAL RUBBER, WAN NURHIDAYAH BINTI A.KARIM
  6. (2016) ENVIRONMENTALLY FRIENDLY POLYMERIC PLASTICIZER FOR POLY(VINYL CHLORIDE), NUR ZAHIDAH BINTI ROZAKI
  7. (2016) APPLICATION OF POLYANILINE COATED FIBER BRAGG GRATING OPTICAL SENSOR FOR CHLOROFORM DETECTION, IRMA ZULAYKA BINTI MOHAMAD AHAD
  8. (2015) EFFECT OF PALM OIL BIO-BASED PLASTICIZER ON THE MORPHOLOGICAL, THERMAL AND MECHANICAL PROPERTIES OF POLY(VINYL CHLORIDE), LIM KAR MIN
  9. (2015) INTERACTIONS BETWEEN SILICA-FILLED EPOXIDIZED NATURAL RUBBER AND FUMARIC ACID, ROHANI BT ABU BAKAR @ NASIR
  10. (2015) EFFECTS OF EMPTY FRUIT BUNCH FIBER ON ELECTRICAL AND MECHANICAL PROPERTIES OF CARBON BLACK FILLED POLYETHYLENE COMPOSITES, CHOH JING LANG
  11. (2014) MODIFICATION OF LIGNIN FROM RICE STRAW AS NATURAL ADHESIVE FOR MAT FORMATION, NOOR SARINAH BINTI MOHD NOOR
  12. (2014) SYNTHESIS OF TONER RESINS BY COPOLYMERIZATION, CHAN SIANG YEE
  13. (2013) Reactive blends of Poly(HB-co-HH) and modified NR, Faridah Binti M M Akram, no.pelajar 2012704639
  14. (2013) USING PALM FIBER TO PRODUCE NANOCOMPOSITE, LEE YIN XIAN
  15. (2013) SYNTHESIS AND CHARACTERIZATION OF POLYANILINE AND ITS APPLICATION AS OPTICAL SENSOR FOR ALCOHOL AND pH DETECTIONS, CHIAM YEONG SIANG
  16. (2012) CELLULOSE WHISKERS REINFORCED PVA COPOLYMER NANOCOMPOSITES, Tan Boon Khoon
  17. (2012) PRESSURE SENSITIVE ADHESIVES FROM NATURAL RUBBER LATEX AND OLEIC ACID-BASED ALKYDS, SITI FATIMAH BINTI MOHD MUSTAFA
  18. (2012) BLENDS OF ACETIC ACID-MODIFIED EPOXIDIZED NATURAL RUBBER WITH POLY (ETHYLENE OXIDE), NG JIN GUAN
  19. (2012) Chemical recycling of waste poly(ethylene terephthalate)(PET) into polyester polyol for the production of semi-rigid polyurethane (PU) foams, ASMALINA BINTI MOHD DARUS
  20. (2011) Synthesis, Characterization and Application of Conducting Polymer on Optical Sensor, Chiam Yeong Siang
  21. (2011) PREPARATION AND CHARACTERIZATION OF REACTIVE BLENDS OF FUNCTIONALIZED POLYETHER AND EPOXIDIZED NATURAL RUBBER, Wan Nurhidayah Binti A.Karim
  22. (2011) MODIFICATION OF LIGNIN FROM RICE STRAW AS NATURAL ADHESIVE FOR MAT FORMATION, Noor Sarinah Binti Mohd Noor
  23. (2010) PREPARATION OF STYRENE ACRYLIC COPOLYMERS AS TONER RESIN BY SUSPENSION POLYMERIZATION, TANG BEE KIM
  24. (2010) SYNTHESIS AND CHARACTERIZATION OF FLEXIBLE POLYURETHANE FOAM LIQUID NATURAL RUBBER BASED POLYOL, SITI ZALEHA BINTI HAJI ISA
  25. (2010) COPOLYMERS OF METHYL METHACRYLATE AND A PALM OIL - BASED MACROMER AS DENTAL MATERIALS., NURSHAFIZA BINTI SHAHABUDIN
  26. (2009) Reactive blends of ENR and PEO, Ng Jin Guan Kevin
  27. (2009) Palm oil based toner resins, Chan Siang Yee
  28. (2009) "PALM-OIL POLYURETHANE ADHESIVES", LEE SOOK CHIN
  29. (2009) SYNTHESIS OF CHROMIUM-BASED ZIEGLER-NATTA CATALYSTS AND THEIR APPLICATION IN ETHYLENE POLYMERIZATION AND ETHYLENS-PROPYLENE COPOLYMERIZATION, WONG JUN XUAN
  30. (2008) Development of environmkental friendly psa from NR latex, Siti Fatimah binti Mohd Mustafa
  31. (2008) SYNTHESIS OF CHROMIUM (III) CARBOXYLATE COMPLEXES AND THEIR USE IN ZIEGLER-NATTA POLYMERIZATION, MOUGANG DJANTENG SOUME BERLINE BEATRICE
  32. (2008) PALM OIL-BASED POLYESTER BINDER FOR MAKING FIBERBOARDS, WONG YEW CHUAN
  33. (2008) SYNTHESIS OF CHEMICALLY PRODUCED TONER (CPT) BY EMULSION AGGREGATION PROCESS, NG WEI GOON
  34. (2008) PREPARATION OF STYRENE ACRYLIC COPOLYMER TONER RESIN BY SOLUTION POLYMERIZATION, NEO SU SIANG
  35. (2008) SYNTHESIS OF FISH OIL-BASED ALKYDS FOR SURFACE COATING APPLICATION, AZLINA BINTI PUANG
  36. (2007) Toner resins and CPT, Tang Bee Kim
  37. (2007) Cr-based catalysts for polymerization of ethylene, Mougang Djantene spse Soume Berline Beatrice
  38. (2007) Chromium-based catalysts for polymerization of olefins, Wong Jun Xuan
  39. (2007) SYNTHESIS OF CHROMIUM (III) ACETATE AND CHLOROACETATE COMPLEXES AND THEIR APPLICATION IN OLEFIN POLYMERIZATION, TAN SAW HONG
  40. (2006) Toner resins from solution polymerization, Neo Su Siang
  41. (2006) Toner resins by emulsion polymerization., Ng Wei Goon (University of Malaya (UM))
  42. (2006) Recycling PET bottles into polyols for polyurethane foams, Azmalina Mohd Darus
  43. (2006) Recycling of PET by reaction with glycerol, Azmalina Mohd Darus
  44. (2006) Liquid rubber as polyols for PU, Siti Zaleha binti Hj Isa
  45. (2006) Fibre boards from palm oil empty fruit branches, Wong Yew Chuan (University of Malaya (UM))
  46. (2006) Development of palm oil-based dental polymers, Nurshafiza Shahabudin
  47. (2006) STUDY OF ETHYLENE POLYMERIZATION BY USING THE AGITATED DRY PHASE REACTOR, ROSLAN BIN HASHIM
  48. (2005) Palm oil-based polyurethane adhesives, Lee Sook Ching (University of Malaya (UM))
  49. (2005) Palm oil based alkyds, Gan Yik Kang (University of Malaya (UM))
  50. (2005) Alkyds from fish oil, Azalina bt Puang
  51. (2003) Synthesis of polyols from palm oil for the production of flexible PU foams, Ling Kong Teng (University of Malaya (UM))
  52. (2003) CONVERTING OLD NEWSPAPERS INTO FIBERBOARD USING A WATER-BASED RESIN, ZHOU JING
  53. (2002) Production of lactic acid by fermentation of effluents from palm oil, rubber and sago mills, Tan Ai Lian (University of Malaya (UM))
  54. (2001) Transesterification of various palm-based oils and polyesters from glycerol., Kee Chin Hui (University of Malaya (UM))
  55. (2001) Pressure Sensitive Adhesives from Natural Rubber, Lee Siang Yin (University of Malaya (UM))
  56. (2001) Olefin polymerization using chromium based Ziegler-Natta catalysts, Taw Saw Hong (University of Malaya (UM))
  57. (2001) Emulsion polymerization of dimethylaminoethyl methacrylate in natural rubber latex, Vivayaganathan K Kathireson (University of Malaya (UM))
  58. (2000) Polymerization of ethylene by two Philips Catalysts using the Agitated Dry Phase Reactor, Roslan Hashim (University of Malaya (UM))
  59. (2000) Degradation of medium chain length PHAs in mangrove and forest soils, Lim Siew Ping (University of Malaya (UM))
  60. (2000) Converting old newspapers into fiberboard using a water-based resin, Zhou Jing (University of Malaya (UM))
  61. (1999) The effects of PEG on silica-carbon black-filled rubber compounds, Tang Yoke Cheng (University of Malaya (UM))
  62. (1997) Degradability in river water of bacterial PHA produced from SPKO, Ho Yen Him (University of Malaya (UM))
  63. (1997) Degradability in garden soil of bacterial PHA produced from SPKO, Shaza Eva bt Mohamad (University of Malaya (UM))
  64. (1997) Alkyds from crude palm oil, Tan Boon Yeoh (University of Malaya (UM))
  65. (1995) The use of trinuclear chromium(III) complexes as Ziegler-Natta catalysts for the polymerization of ethylene, Ooi Chui Ping (University of Malaya (UM))
  66. (1995) Synthesis of water-reducible alkyds from palm stearin, Teo Kim Teck (University of Malaya (UM))
  67. (1995) Effect of coupling agents on rheological properties of talc filled polypropylene compounds, Chua Ai Wah (University of Malaya (UM))
  68. (1994) Pressure sensitive adhesives from natural rubber, Larry Lee Mok Swee (University of Malaya (UM))
  69. (1993) Studies of some cultivation conditions on PHAs accumulation in P.putida PGA1, Theanmalar a/p Masilamani (University of Malaya (UM))
  70. (1992) Studies on the hydrogenation of natural rubber using nickel 2-ethylhexanoate as catalyst, Nadaraja a/l Subramaniam (University of Malaya (UM))
  71. (1992) Production and characterization of PHAs by Pseudomonas putida PGA1 from palm oil and palm kernal oil derivatives, K.Sudesh Kumar a/l C.Kanapathi Pillai (University of Malaya (UM))
  72. (1987) Storage Hardening of Natural Rubber, Eng Aik Hwee (University of Malaya (UM))

TEACHING

Bachelor
  1. (2013) SCES3334 - Polymer Ii
  2. (2012) SCES1230 - Physical Chemistry 1
  3. (2012) SCES2242 - General Polymer Chemistry
  4. (2012) SCES2434 - Polymer 1
  5. (2012) SCES3334 - Polymer 2
  6. (2011) SCES2242 - General Polymer Chemistry
  7. (2010) SCES2434 - Polymer 1
  8. (2010) SCES2434 - Polymer 1
  9. (2010) SCES3334 - Polymer 2
  10. (2010) SCES3334 - Polymer 2
  11. (2008) SCEP1252 - Basic Chemistry I
  12. (2007) SCES2434 - Polymer Chemistry I (With Practical)
  13. (2007) SCES3130 - Physical Chemistry III
  14. (2007) SCES3334 - Polymer Chemistry Ii

PATENT/IPR

  • Environmentally friendly natural oil-based toner resin. Inventor: Gan Seng Neon
    Patent (National)
  • Styrene-Butyl Acrylate-Isoprene terpolymer as polymeric coating for rubber glove: Improving ease of donning and comfort (New Title: A METHOD FOR PRODUCING A POLYMER EMULSION)
    PATENT
  • Denture base composition
    PATENT
  • An Aqueous Emulsion Composition for Coating Paper
    PATENT
  • Conversion of poly(vinyl alcohol) waste to glue
    COPYRIGHT
  • A Process For Polymerization of Olefin
    PATENT
  • A Process For Producing Water-Based Resin And The Fiberboard Produced Using The Resin Thereof
    PATENT
  • An Aqueous Emulsion Composition for Coating Papers
    Patent (National)
  • A METHOD OF PRODUCING A SANDWICH STRUCTURED COMPOSITE
    PATENT
  • A novel approach to enhance the mechanical properties of poly(methyl methacrylate) dental materials by incorporating a palm oil-based macromer
    PATENT
  • Preparation and characterization of Environmental Friendly PVA/kenaf composite as Mulch Film for Agricultural Application
    PATENT
  • Eco-friendly Plasticizer For Poly(vinyl chloride)
    PATENT
  • A Method for producing Degradable Mulch Film
    Patent (National)
  • Korean Patent: Environmentally friendly natural oil-based toner resin
    Patent (International)
  • Denture base composition
    Patent (National)
  • Deture Base Composition
    Patent (National)
  • Polyurethane Oligomers For Use In Restorative Dentistry
    PATENT
  • Palm Oil-based Compounds as Environmentally Friendly Plasticisers for PVC
    PATENT
  • Polyurethane Oligomers For Use In Restorative Dentistry
    Patent (National)
  • Palm Oil-based Compounds as Environmentally Friendly Plasticisers for PVC, Inventors: Desmond Ang Teck Chye and Gan Seng Neon, PI2013701781
    Patent (National)
  • POLYURETHANE OLIGOMERS FOR USE IN RESTORATIVE DENTISTRY, by Gan Seng Neon,Noor Hayaty Binti Abu Kasim, Fadhel Alsanabana, Zambri bin Radzi, and Noor Azlin Binti Yahya.
    Patent (International)
  • ECO-FRIENDLY PLASTICIZER FOR POLY(VINYL CHLORIDE
    Patent (National)
  • Fiberboard from agriculture wastes and a method for manufacturing the same
    Patent (International)
  • ECO- FRIENDLY PLASTICIZER FOR POLY (VINYL CHLORIDE)
    Patent (National)
  • Polyurethane oligomers for use in restorative denistry
    Patent (International)
  • Natural Oil-Based Chemically Produced Toner
    Patent (International)
  • Polyurethane oligomers for use in restorative dentistry - Seng Neon Gan, Noor Hayati binti Abu Kassim, Fadhel Alsanabana, Zamri bin Radzi, Noor Azlin Binti Yahya
    Patent (International)
  • Fiberboard from agricultural wastes and a method for manufacturing the same - Seng Neon Gan, Soon Chee Yap and Chin Sia Chang
    Patent (International)
  • T.Hattori, K.Terakawa, N Ichikawa, T.Sakaki, Gan S N and Lee S Y, "Rubber Composistion for Tire and Pneumatic Tire Using the Same", 2012, United States Patent, US 8,100,157,B2, Jan 24, 2012
    Patent (International)
  • Environmentally friendly natural oil-based toner resin - Seng Neon Gan
    Patent (International)
  • A Process For Reducing Protien Allergens in Natural Rubber Latex and Articles Fabricated Therefrom
    PATENT
  • Fire Resistant Roofing Materials From Local Plant Fibres
    PATENT
  • Fibreboard from agricultural wastes and a method for manufacturing the same - GAN,Seng Neon, YAP,Soon Chee, CHANG Chin Shia.
    Patent (International)
  • Natural oil-based chemically produced toner - GAN, Seng Neon
    Patent (International)
  • Environmentally friendly natural oil-based toner resin
    Patent (International)
  • FIBREBOARD FROM AGRICULTURAL WASTES AND A METHOD FOR MANUFACTURING THE SAME
    Patent (International)
  • Water-reducible Acrylic Copolymer Dipping Composition & Rubber Products Coated With Same (Acrylic Resin For Rubber Gloves Coating)
    PATENT
  • Fiberboard from agriculture wastes and a method for manufacturing the same,Malaysia Patent Application PI 20094949
    Patent
  • POLYURETHANE OLIGOMERS FOR USE IN RESTORATIVE DENTISTRY
    Patent (National)
  • Natural oil-based chemically produced toner PI20093973 filed on 24-9-2009
    Patent (National)
  • Environmentally friendly natural oil-based toner resin - PCT - WO2009/005335A2
    Patent (International)
  • Alkyds made from completely natural materials
    PATENT
  • Rubber composition, rubber composition for tire, and pneumatic tire using the same, Malaysia PatentApplication, PI 20070672
    Patent (International)
  • Rubber composition for tire and pneumatic tire using the same Malaysia Patent Application,PI 20070671
    Patent (National)
  • New roofing materials from local agriculture waste fibres - PI20070013
    Patent (National)
  • Alkyds made from completely natural materials PI20070220
    Patent (National)
  • Application of Polyhydroxyalkanoate(PHA) in rubber tire compounds
    PATENT
  • Rubber composition for tire and pneumatic tire using the same - Ichikawa Naoya, Sakaki Toshiaki, Gan Seng Neon and Lee Siang Yin
    Patent (International)
  • Rubber composition for tire and pneumatic tire using the same, US Patent Application Pub.No.:US2007/0100061 A1, May 3, 2007
    Patent (International)
  • Modification of Rubber by Alkyds PI20060622
    Patent (National)
  • Rubber composition and pneumatic tire using the same - PI 20063774
    Patent (International)
  • An Olefin Polymerization Catalysts and Processes of Making Same, Patent No.MY132637, Date of Grant 31-10-2007
    Patent
  • Water-reducible Acrylic Copolymer Dipping Composition and Rubber Products Coated with Same PI20055440
    Patent (National)
  • Water-reducible acrylic copolymer dipping composition & rubber products coated with same Patent Grant No. MY-139117-A.
    Patent (National)
  • A Process For Polymerization Of Olefin
    Patent (National)
  • Flexible Polyurethane Foams From Palm Oil and Its Derivatives
    PATENT
  • A Process For Reducing Protein Allergens In Natural Rubber Latex and Articles Fabricated Therefrom, PI20044188 - MY142012
    Patent (National)
  • A process for producing polyol and polyurethane adhesives PI20042859
    Patent (National)
  • A Process For Producing Flexible Polyurethane Foams From Palm Oil Based Polyester Polyols PI20045074
    Patent (National)
  • A process for producing water-based resin and the fibreboard produced using the resin therof PI20042251
    Patent (National)
  • An Olefin Polymerization Catalysts and Process making polyolefins.PI 9700042
    Patent (National)
  • Method of Curing Epoxy-Polymers
    Patent (International)
  • FIBERBOARD FROM AGRICULTURAL WASTES AND METHOD FOR MANUFACTURING THE SAME
    PATENT
  • NATURAL OIL-BASED CHEMICALLY PRODUSED TONER
    PATENT
  • A PROCESS FOR PRODUCING POLYMOL AND POLYUTETHANE ADHESIVES
    PATENT
  • Environmental Friendly Palm Oil-based Toner Resin
    PATENT
  • MODIFICATION OF RUBBER BY ALKYDS
    PATENT
  • PALM OIL BIO-BASED PLASTICIZER FOR POLY(VINYL CHLORIDE)
    PATENT
  • Palm oil based compound as an alternative to petroleum based plasticiser for PVC
    PATENT

SOCIAL RESPONSIBILITY ACTIVITIES

  • Member On Panel of Judges for Ikm-Rsc Best Polymer Thesis Award 2016 Sponsored by Synthomer (for Degree Awarded in 2015), (01 Sep 2016 - 12 Oct 2016)
  • Student Consultant At Um111consult, (25 May 2016 - 25 May 2016)
  • Esteemed Member of The Panel of Judges for The 27th International Invention Innovation & Technology Exhibition 2016 (Itex2016) Held On 12-14 May 2016 At Klcc., (12 May 2016 - 14 May 2016)
  • National Organizing Committee Member, 25th Polychar 2017 "World Forum On Advanced Materials", (01 Mar 2016 - 31 Oct 2017)
  • Participation in Round Robin Test (Rrt) of International Standard Organization (Iso Np20368)Testing, (16 Dec 2015 - 31 Mar 2016)
  • Adviser to Alumni Cheng Kung University Malaysia On Maths & Science Quiz On Chemistry Subject., (15 Jul 2015 - 19 Sep 2015)
  • Review On The Research Article 168485 Titled "Mechanical and Electrical Properties of Styrene-Isoprene-Styrene Copolymer Doped Expanded Graphite Nanoplatelets to Journal of Nanomaterials, (25 May 2015 - 17 Jun 2015)
  • A Judge At The 26th International Invention Innovation & Technology Exhibition (Itex 2015), (21 May 2015 - 21 May 2015)
  • Review of Manuscript Poc-D-14-00558r1 to Progress in Organic Coatings, (03 May 2015 - 20 May 2015)
  • Internal Examiner to Phd Thesis: Synthesis and Characterization of Polyaniline for Hydrazine Detection, by Kavirajaa Pandian a/L Sambasevam (Shc110019), (12 Mar 2015 - 24 Apr 2015)
  • Review of Manuscript Poc-D-14-00310r1 to Progress in Organic Coatings : The Performances of Biodegradable Tung Oil Coatings, (01 Mar 2015 - 23 Mar 2015)
  • Review of Manuscript Id Prt-11-2014-0107 for The Pigment & Resin Technology: The International Journal of Colorants,Polymers and Colour Applications, (15 Feb 2015 - 04 Mar 2015)
  • Evaluate Candidate for Promotion to Professorship (UKM), (09 Jan 2015 - 24 Jan 2015)
  • Review of Manuscript Poc-D-14-00558 for Progress in Organic Coatings :High Bio-Based Content Waterborne Uv-Curable Coatings With Excellent Adhesion and Flexibility, (07 Jan 2015 - 26 Jan 2015)
  • Reviewer for Paper to Advances in Polymers and Composites Research: Impedance Spectroscopy: a Practical Guide to Evaluate Parameters of Nyquist Plot for Solid Polymer Electrolyte Applications, (01 Jan 2015 - 31 Jan 2015)
  • Member of The "National Organising Committee (Noc) Faps � Ipc 2015", (01 Jan 2015 - 20 Oct 2015)
  • Reviewer for The Journal of Composite Materials, (31 Dec 2014 - 17 Jan 2014)
  • Review of Manuscript - Jrubbres-D-14-00039 Submitted to Journal of Rubber Research, Sulfurless System for Carboxylated Acrylonitrile Butadiene (Nitrile) Latex Films & Its Cytotoxicity Properties, (16 Dec 2014 - 16 Jan 2015)
  • Reviewed Manuscript Prt-1120140102 to Pigment & Resin Technology- Investigation On The Modification to Solvent-Containing Two-Component Polyurethane Coating by Carbon Nanotubes, (01 Dec 2014 - 26 Jan 2015)
  • Reviewed Research Paper for Progress in Organic Coatings - Poc-D-14-00339r1, (14 Nov 2014 - 27 Nov 2014)
  • Reviewed Research Paper to The Journal of Composite Materials - Jcm-13-0939.R2, (27 Mar 2014 - 07 Apr 2014)
  • Reviewer for The Journal Composite Materials, (20 Feb 2014 - 10 Mar 2014)
  • Reviewer to Paper Submitted to Journal of Coatings Technology and Research, (10 Feb 2014 - 09 Feb 2015)
  • Referee to Journal Manuscripts to Journal of Rubber Research., (01 Jan 2014 - 31 Dec 2016)
  • Penilaian Skim Geran Penyelidikan Fundamental(Frgs) Fasa 2/2013 Peringkat UM, (10 Sep 2013 - 17 Sep 2013)
  • Examiner to Candidature Defence, Chemistry Department, Sept 2013, (02 Sep 2013 - 02 Sep 2013)
  • Visit to Lam Seng Plastics & Guppy Plastic Ind., as Delegate of The Materials and Polymer Section of Ikm, (28 Aug 2013 - 28 Aug 2013)
  • Serve as Independent Non-Executive Director of Jadi Imaging Technologies Sdn Bhd, Re-Elected On 20-5-2013 Http://WWW.Jadi.Com.My/About-Us/Board-of-Directors/, (20 May 2013)
  • Serve as Reviewer for Articles Submitted to Journal of Rubber Research, May 2013, (06 May 2013 - 29 May 2013)
  • Served as Reviewer to Research Paper Submitted to Journal of Coatings Technology and Research (Jctr), (24 Apr 2013 - 20 May 2013)
  • Examiner to Phd Conversion Seminar by Dazylah Bt Darji(Sgr110044), (29 Mar 2013 - 15 Apr 2013)
  • Panel Penilaian Sciencefund Klaster S2s, (05 Mar 2013 - 28 Aug 2013)
  • Penal Member to Project Evaluations, Mosti, (26 Feb 2013)
  • Representative of Institut Kimia Malaysia (Ikm) to The 4th Council Meeting of The Federation of Asian Polymer Societies (Facs) At Chengchun, China, from 19-23 Aug 2012 and Presented Report On The Activities of The Polymer & Materials Section, Ikm., (19 Aug 2012 - 23 Aug 2012)
  • Participapted in The "Ikm Polymer and Materials Chemistry Section Brain-Storming Session On University Polymer Syllabi" 18 Feb 2012 (Saturday) and Presented a Working Paper On The Practical Components of Polymer Chemistry Courses., (18 Feb 2012 - 18 Feb 2012)
  • Reviewing Polymer Chemistry Syllabi of Local Universities - Organized by Institut Kimia Malaysia, (18 Feb 2012 - 18 Feb 2012)
  • External Examiner to Phd Thesis: Fabrication, Characterization and Application of Phb-Titanium Dioxide Nanocomposite Materials by Nanthini Sridewi a/P Appan, USM, (05 Jan 2012 - 12 Jan 2012)
  • Serve as Reviewer for Articles Submitted to Journal of Rubber Research., (01 Jan 2012)
  • Periodic Contributions to Welfare Organizations., (01 Jan 2012 - 31 Dec 2012)
  • Representative of Institut Kimia Malaysia (Ikm) to The Council Meeting of The Federation of Asian Polymer Societies (Facs) At Beijing, China, from 8-11 May 2011, Presented Report On The Activities of The Polymer & Materials Section, Ikm, and Bid to Host Faps-Pc2015 in Malaysia, (08 May 2011 - 11 May 2011)
  • Editorial Board Member of Journal of Rubber Research, (01 Jan 2011 - 31 Dec 2015)
  • Member of Organizing Committee for Rheology Workshop, 22-24th Nov 2010, Held At Holiday Inn, Glenmarie.Shah Alam., (22 Nov 2010 - 24 Nov 2010)
  • Chairman of Working Committee for Wg Eco-Labelling Criteria for Adhesives, Standards Research and Management Centre,Sirim Berhad, (01 Aug 2010 - 07 Jun 2013)
  • Developed New Palm Oil-Based Light Curable Polyurethane Oligomeric Dental Material for Replacing Toxic Mercuric Amalgam., (31 Aug 2009 - 15 May 2013)
  • Serve as Independent Non-Executive Director of Jadi Imaging Technologies Sdn Bhd, (23 Jun 2006 - 20 May 2015)
  • Technical Assessor and Panel Member to Assessment Reports, Department of Standard Malaysia (Dms), (01 Sep 1999)
  • Representative of UM At The International Standard Working Committee Iso/Tc45 for Natural Rubber Products-Testings and Specifications, (01 Jan 1999 - 31 Dec 2006)
  • Technical Assessor for Accreditation Scheme of Test Laboratories in Malaysia, Appointed by Department of Standard Malaysia (Dms), (01 Sep 1998)