PERSONAL DETAIL


ASSOCIATE PROF. DR. SITI ZAWIAH BINTI MD DAWAL

Associate Professor
Department of Mechanical Engineering
Faculty of Engineering
 
  +603-79675251
  +603-79675330
  sitizawiahmd@um.edu.my
 Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, W.Persekutuan Kuala Lumpur, Malaysia
 
ResearcherID Link
  http://www.researcherid.com/rid/B-9816-2010

ACADEMIC QUALIFICATION
(Qualification), (Institution).



PROFESSIONAL
(Organisation), (Role), (Year), (Level).


  • University of Malaya , Auditor, 2007 to 2015, (University)
  • Ergonomics Technical Committee for Malaysian Standard , National Technical Committee Members, 2010 to 2022, (National)
  • Board of Engineers Malaysia, Member, 2010 to 2019, (National)
  • Human Factor and Ergonomics Malaysian Society , Member, 2012 to 2019, (National)
  • SIRIM ISO Standard Panel for Ergonomics Safety and Health , Panel, 2019, (National)

ADMINISTRATIVE DUTIES
(Role), (Level), (Start date),(End Date).


  • Programme Coordinator, Faculty, 01/03/2019 to 03/04/2020 (MEng Manufacturing )
  • Head of Unit, Faculty, 01/01/2019 to 30/06/2019 (Head of Activa@UMI)
  • Chairman, Faculty, 01/11/2018 to 31/12/2019 (4th International Conference on Ergonomics - 2019)
  • Programme Coordinator, Faculty, 01/09/2018 to 31/08/2019 (Coordinator Master of Engineering Manufacturing)
  • Chairman, Faculty, 03/01/2017 to 31/03/2017 (Exhibition on OKU and Eldelry - ORKID WEC 2017)
  • Supervisor, Faculty, 08/01/2016 to 01/03/2019 (Nurul Izzah Abd Rahman)
  • Supervisor, Faculty, 08/01/2016 to 01/03/2019 (Nazlin Hanie)
  • Head of Industrial Ergonomics Lab , Faculty, 03/08/2015 to 24/03/2022 (Ergonomics lab for UG and master )
  • Head of ORKID Research Group (OKU and Elderly - Integrated Development Research) , Faculty, 01/07/2014 to 24/03/2022 (Research on OKU and Elderly focusing on ergonomics product design and development especially assisting people with disability with their everyday living to fit into the society comfortably.)
  • Conference Chairperson - 3rd ICE 2015, International, 01/03/2014 to 31/08/2015
  • Conference Chairperson - 2nd ICE 2013, International, 01/07/2011 to 01/07/2013 (Chairman for 2nd International conference on Ergonomics.)
  • Director of CPDM, University Malaya, 01/01/2011 to 31/12/2013
  • Head of Department, Department of Engineering Design & Manufacture, Faculty of Engineering, 01/09/2009 to 01/07/2011
  • MQF Committe member - Person Incharge, Faculty, 01/10/2008 to 30/09/2009 (MQF Committee member)
  • Treasurer Techpost Conference, University Malaya, 10/08/2008 to 31/12/2009
  • CHAIRMAN - of safety and health committee (department), Faculty, 07/03/2008 to 31/12/2009 (Safety Committee)
  • CHAIRMAN - OBE , Faculty, 03/03/2008 to 31/12/2009 (Chairman of OBE )
  • CO-CHAIRMAN of International Ergonomics Conference 3-5 Dec 2007, International, 05/01/2007 to 07/03/2008 (International conference on Ergonomics)
  • Head of Department, Faculty, 01/09/2006 to 15/11/2007 (Head of Department of CAD/M and Manufacturing Engineering (Old Name) )
  • SECRETARIAT for FWS Kuala Lumpur 2005 (AUNSEED-NET), University Malaya, 07/01/2005 to 04/11/2005 (NOT F)

AREAS OF EXPERTISE
(Area).


  • Work Design (job design, job satisfaction, manual assembly, automotive industries)
  • Ergonomic Aspects (work design, job satisfaction model, automotive assembly)
  • Flexible Manufacturing Systems (layout, schedulling, loading and uploading)
  • Transport Ergonomics (comfort model, design, cabin, transport )


RECENT SELECTED PUBLICATIONS
(Publication).


Chapter in Book

2012
  • Zahari Taha, Hartomo Soewardi, Siti Zawiah and Aznijar Ahmad-Yazid (2012). Ergonomics Design Criteria of a Virtual Environment, Virtual Reality and Environments, Dr. Cec¿a S¿L¿i (Ed.), ISBN: 978-953-51-0579-4, InTech, Available from: http://www.intechopen.com/books/virtual-reality-and- environments/ergonomics-design-of-virtual-environment 
  • Research Journal of Applied Sciences, Engineering and Technology. 

2010
  • H. R. Zadry, S. Z. Dawal, Z. Taha. 2010. Upper Limb Muscle and Brain Activity in Light Assembly Task on Different Load Levels. IAENG Transactions on Engineering Technologies Volume 5, 2010. American Institute of Physics. 

2008
  • S. Z. Dawal, Mirta W., Y. H. Ling, and H. R. Zadry (2008). The Effect of Bench Drill Laboratory Hand Tool on Muscle Activity and Heart Rate Measurement. In: The 4th Kuala Lumpur International Conference on Biomedical Engineering. 25-28 June 2008 (ISI-Indexed)
  • H. R. Zadry and S. Z. Dawal (2008). Future Research on Muscle and Mental Fatigue in Industry: A Mini Review. In: The 4th Kuala Lumpur International Conference on Biomedical Engineering. 25-28 June 2008 (ISI-Indexed)

2006
  • Siti Zawiah Md Dawal, N. Soin, W. N. W. Mahadi, N. M. Ali, N.A. Abu Osman, S. A. Aziz, M. Yusof, and Z. Ismail (2006). A Preliminary Study of EMG Measurements on Biceps Brachii Muscles During Repetitive Task at Automotive Industry. IFMBE Proceedings, 3rd Kuala Lumpur International Conference on Biomedical Engineering 2006Part 6 (ISI-Indexed)
  • W. N. W. Mahadi, A. Rashid, N. M. Ali, N. Soin N. and S. Z. Dawal (2006). Biological Effect of EMF in Engineering Teaching Laboratories: A Review.IFMBE Proceedings, 3rd Kuala Lumpur International Conference on Biomedical Engineering 2006Part 4 (ISI-Indexed)
  • Siti Zawiah Md Dawal. SISTEM HIBRID ARTICLE IN ENSAIKLOPEDIA SAINS DAN TEKNOLOGI PENERBIT: UNIVERSITI TEKNOLOGI MALAYSIA, JOHOR BAHRU DENGAN DEWAN BAHASA DAN PUSTAKA 
Article in Academic Journals

2020
  • WHIPLASH INJURY MECHANISMS OF CAR REAR OCCUPANTS: A REVIEW AN Haniffah, SZ Dawal, S Julaihi Malaysian Journal of Public Health Medicine 20 (Special1), 272-281 (SCOPUS-Indexed)
  • Rahman N.I.A, Dawal, S.Z.M and Yusoff N . Ageing drivers subjective mental workload and response rate in real -time driving task. Journal of Engineering Research(2020) (ISI-Indexed)
  • Driving mental workload and performance of ageing drivers, NI Abd Rahman, SZM Dawal, N Yusoff Transportation research part F: traffic psychology and behaviour 69, 265-285 (ISI-Indexed)
  • Evaluation of turned and milled surfaces roughness using convolutional neural network AP Rifai, H Aoyama, NH Tho, SZM Dawal, NA Masruroh Measurement, 107860 (ISI-Indexed)
  • Ihwan Ghazali, Salwa Hanim, Abdul rashid, Siti ZAwiah Md Dawal, Nurul Huda, Guideline for designing green product considering customer cultural preferences, Sustainanbility - 1027101 (ISI-Indexed)
  • ABLUTION WORKSTATIONS DESIGN FOR PERSON WITH PHYSICAL DISABILITIES IN MALAYSIA SZMD Dawal, W Mirta Malaysian Journal of Public Health Medicine 20 (Special1), 101-107 (SCOPUS-Indexed)
  • 5)Effect of Auditory disctraction on hand and foot reaction time among ageing Malysian Automobile Drivers, Malaysian Journal of Public Health Medicine 20 (Special1), 272-281 (Scopus Index) (SCOPUS-Indexed)
  • Significant Driving Behaviour Pattern Of Ageing Malaysian Automobile Drivers , International Journal of Scientific & Technology Research Volume 9,Issue 02, Feb 2020 Issn 2277-8616  (SCOPUS-Indexed)

2019
  • Widia M, Md. Dawal SZ, Yusoff N (2019) Maximum acceptable frequency of lift for combined manual material handling task in Malaysia. PLoS ONE 14(5): e0216918. https://doi.org/10.1371/journal.pone.0216918 (ISI-Indexed)
  • SITI ZAWIAH MD DAWAL AND NURSYAHIRAH ADNAN, Applied Anthropometric for Wheelchair User in Malaysia (ISI-Indexed)

2018
  • A review of the offshore oil and gas safety indices Author links open overlay panelKuok Ho DanielTangaSiti ZawiahMd DawalaEzutah UdoncyOlugub (ISI-Indexed)
  • Design and Analysis of Ankle Foot Orthosis for Disabled Children S. Mohamaddan, N.Z. Ishak, A.M. Aizuddin, S. Yamamoto, S.Z.M. Dawal, E.B. Safawi, H. Khamis (SCOPUS-Indexed)
  • Development of an Ankle Foot Orthosis for Hemiplegic Children S. Mohamaddan, N. Z. Ishak, M. Shanat, S. Z. M. Dawal (SCOPUS-Indexed)
  • Design of Mechanical Bracing Device for Clubfoot Treatment S. Mohamaddan, A. H. Rasit, S. Z. M. Dawal (SCOPUS-Indexed)
  • Green Product Preferences with Respect to Cultural Influences: Empirical Study in Indonesia Ihwan Ghazali, Salwa Hanim Abdul Rashid, Siti Zawiah Md Dawal, Hideki Aoyama, Alva Edy Tontowi, Raja Ariffin Raja Ghazilla (ISI-Indexed)
  • Non-dominated sorting biogeography-based optimization for bi-objective reentrant flexible manufacturing system scheduling (ISI-Indexed)
  • Integrating fuzzy expert system and scoring system for safety performance evaluation of offshore oil and gas platforms in Malaysia Kuok Ho DanielTanga, Siti ZawiahMd Dawal, Ezutah UdoncyOlugub (ISI-Indexed)
  • Abd Rahman, N.I., SITI ZAWIAH MD DAWAL , Yusoff, N., Mohd Kamil, N.S. (2018). Anthropometric measurements among four Asian countries in designing sitting and standing workstations. Sādhanā. 43: 10. https://doi.org/10.1007/s12046-017-0768-8 (ISI-Indexed)
  • A Benchmarking of the Integrated Train Driver Performance Model Jalil Azlis-Sani, Siti Zawiah Md Dawal and Norhayati Mohmad Zakwan (SCOPUS-Indexed)

2017
  • Electromyography Analysis During Lifting Tasks: A Pilot Study.Pertanika Journal of Science and Technology. 2017. Siti Anom Ahmad, Nor Hafeezah Kamarudin, Rosnah Mohd Yusoff, Mohd Khair Hassan, Md Dawal, Siti Zawiah (ISI-Indexed)
  • An Investigation into a Gear based-knee joint designed for lower limb Prosthesis. Applied bionics and biomechanics.MSH Bhuiyan, IA Choudhury, M Dahari, Y Nukman, SZ Dawal (ISI-Indexed)
  • Cultural Influences on Choosing Green Products: An Empirical Study in Malaysia. Sustainable Development 2017. Ihwan Ghazali, Salwa Hanim Abdul‐Rashid, Siti Zawiah Md Dawal, Hideki Aoyama, Alva Edy Tontowi, Novita Sakundarini (ISI-Indexed)
  • Multi Objective Agv Scheduling in an FMS using a hybrid of genetic algorithm an particle swarm optimization. Maryam Mousavi, Hwa Jen Yap, Siti Nurmaya Musa, Farzad Tahriri, Siti Zawiah Md Dawal (ISI-Indexed)
  • Ghazali, I., Abdul‐Rashid, S. H., Dawal, S. Z. M., Aoyama, H., Tontowi, A. E., & Sakundarini, N. (2017). Cultural influences on choosing green products: An empirical study in Malaysia. Sustainable Development. (ISI-Indexed)
  • Mousavi M, Yap HJ, Musa SN, Tahriri F, Md Dawal SZ (2017) Multi-objective AGV scheduling in an FMS using a hybrid of genetic algorithm and particle swarm optimization. PLoS ONE 12(3): e0169817. doi:10.1371/journal.pone.0169817 (ISI-Indexed)
  • Factors affecting safety of processes in the Malaysian oil and gas industry Tang, D. K. H.; Leiliabadi, F.; Olugu, E. U.; S.Z Dawal Source: Safety Science Volume: 92 Pages: 44-52 Published: 2017 (ISI-Indexed)

2016
  • Present needs, recent progress and future trends of energy-efficient Ultra-Low Carbon Dioxide (CO2) Steelmaking (ULCOS) program MA Quader, S Ahmed, SZ Dawal, Y Nukman Renewable and Sustainable Energy Reviews 55, 537-549 (ISI-Indexed)
  • Development of statistical models for predicting muscle and mental activities during repetitive precision tasks HR Zadry, SZM Dawal, Z Taha International Journal of Occupational Safety and Ergonomics, 1-10 (ISI-Indexed)
  • An integrated MCDM model for conveyor equipment evaluation and selection in an FMC based on a Fuzzy AHP and Fuzzy ARAS in the presence of vagueness HT Nguyen, SZM Dawal, Y Nukman, AP Rifai, H Aoyama PloS one 11 (4), e0153222 (ISI-Indexed)
  • Int J Adv Manuf Technol DOI 10.1007/s00170-015-7395-5 (ISI-Indexed)
  • Multi-objective adaptive large neighborhood search for distributed reentrant permutation flow shop scheduling AP Rifai, HT Nguyen, SZM Dawal Applied Soft Computing 40, 42-57 (ISI-Indexed)
  • SITI ZAWIAH MD Dawal, WNL Mahadi, M Mubin, DDI Daruis, S Mohamaddan, ..Wudu'Workstation Design for Elderly and Disabled People in Malaysia's Mosques. Iranian Journal of Public Health 45 (1), 114 (ISI-Indexed)
  • Malaysian Ergonomics Standards-Its Development, Awareness and Implementation-A Review Article RM Yusuff, Z Baba, SZMD Dawal, E Tan Iranian Journal of Public Health 45 (1), (ISI-Indexed)
  • Virtual Planning, Control, and Machining for a Modular-Based Automated Factory Operation in an Augmented Reality Environment YS Pai, HJ Yap, SZM Dawal, S Ramesh, SY Phoon Nature Publishing Group. Scientific Reports 6, 27380 (ISI-Indexed)
  • Application of acoustic emission sensor to investigate the frequency of tool wear and plastic deformation in tool condition monitoring MSH Bhuiyan, IA Choudhury, N Yusoff, SZM Dawal Measurement (ISI-Indexed)
  • Bhuiyan, M. S. H., Choudhury, I. A., Dahari, M., Nukman, Y., Dawal, S. Z. 2016. Application of acoustic emission sensor to investigate the frequency of tool wear and plastic deformation in tool condition monitoring Measurement: Journal of the International Measurement Confederation (SCOPUS-Indexed)

2015
  • Farzad Tahriri,Maryam Mousavi, Yap Hwa Jen, Siti Zawiah Md Dawal, Zahari Taha. Optimizing The Robot Arm Movement Time Using Virtual Reality Robotic Teaching System. International Journal of Simulation Modelling. March 2015 (ISI-Indexed)
  • Achmad P Rifai, Siti Zawiah Md Dawal, Aliq Zuhdi, Hideki Aoyama, K Case. Reentrant FMS scheduling in loop layout with consideration of multi loading- unloading stations and shortcuts. The International Journal of Advanced Manufacturing Technology.(2015) (ISI-Indexed)
  • Nabilla Sofia Mohd Kamil & Siti Zawiah Md Dawal. (2015). Effect of postural angle on back muscle activities in aging female workers performing computer tasks. J. of Phys. Ther. Sci, 27(2015) (ISI-Indexed)
  • The Effects of Energy Expenditure Rate on Work Productivity Performance at Different Levels of Production Standard Time. (2015)Journal of Physical Therapy Science (ISI-Indexed)
  • Siti Zawiah Md Dawal, Farzad Tahriri, Yap Hwa Jen, Keith Case, Nguyen Huu Tho, Aliq Zuhdi Maryam Mousavi, Atefeh Amindoust, and Novita Sakudarini. Empirical Evidence of AMT Practices and Sustainable Environmental Initiatives in Malaysian Automotive SMEs., IJPM, vol 16, no 6 (2015 (ISI-Indexed)
  • HT. Nguyen, SITI ZAWIAH MD DAWAL, Y. Nukman, K.Casei, H. Aoyama. An Integrated Approach of Fuzzy Linguistic Preference based AHP and Fuzzy COPRAS for Machine Tool Evaluation. PLOS One (2015) (ISI-Indexed)
  • Muscle Activity, Time to Fatigue and Maximum Task Duration at Different Levels of Production Standard Time.Journal of Physical Therapy Science 27, 7, 2015. (ISI-Indexed)
  • Siti Zawiah Md Dawal, Zubaidah Ismail, Khairi Yusuf, Salwa Hanim Abdul Rashid, Nurul Shahidah Md Shalahim, Nor Suliani Abdullah, Nabilla Sofia Mohd Kamil.Determination of the significant anthropometry dimensions for user-friendly designs of domestic furniture and appliances - Experience from a study in Malaysia. Measurement 59 (2015) 205 215 (ISI-Indexed)

2014
  • Yap, H. J., Taha, Z., Dawal, S. Z. M., Chang, S. W. 2014. Virtual Reality Based Support System for Layout Planning and Programming of an Industrial Robotic Work Cell. Plos One (ISI-Indexed)
  • Tahriri, F., Dawal, S. Z. M., Taha, Z. 2014. Fuzzy Mixed Assembly Line Sequencing and Scheduling Optimization Model Using Multiobjective Dynamic Fuzzy GA. Scientific World Journal (ISI-Indexed)
  • Taha, Z., Soewardi, H., Dawal, S. Z. M. 2014. Axiomatic design principles in analysing the ergonomics design parameter of a virtual environment. International Journal of Industrial Ergonomics (ISI-Indexed)
  • Nguyen, H. T., Dawal, S. Z. M., Nukman, Y., Aoyama, H. 2014. A hybrid approach for fuzzy multi-attribute decision making in machine tool selection with consideration of the interactions of attributes. Expert Systems with Applications (ISI-Indexed)
  • Farzad Tahriri, Siti Zawiah Md Dawal, Zahari Taha. Multi-Objective Fuzzy Mixed Assembly Line Sequencing Optimization Model. Journal of Applied Mathematics, 2014. (ISI-Indexed)
  • HT. Nguyen, SZ Md Dawal, Y. Nukman, F. Tahiri, H. Aoyama (2014). A Hybrid approach for fuzzy multi attribute decision making in machine tool selection with consideration of attributes. Expert Systems with Applications, Volume 41, Issue 6, May 2014, Pages 3078 3090 (ISI-Indexed)
  • Zahari Taha, Hartomo Soewardi, Siti Zawiah Md Dawal. Axiomatic design principles in analysing the ergonomics design parameter of a virtual environment. International Journal of Industrial Ergonomics, 2014. (ISI-Indexed)
  • H.J. Yap, Z.Taha, S.Z.M. Dawal, S.W. Chang. Virtual Reality based Support System for Layout Planning and Programming of an Industrial Robotic Work Cell. PLoS One (2014) (ISI-Indexed)

2013
  • Adila Md Hashim & Siti Zawiah Md Dawal (2013). Evaluation of students Working Postures in School Workshop. International Journal of Ergonomics, 3(1), 25- 32. (ISI-Indexed)

2012
  • "Siti Zawiah Md. Dawal, Hilma Raimona Zadry, Sharifah Nadya Syed Azmi, Siti Rusyida Rohim, Sari Julia Sartika. Anthropometric Database for the Learning Environment of High School and University Students. Int J Occup Saf Ergon, 2012; 18(4) 461 472 " (ISI-Indexed)
  • Egonomics (ISI-Indexed)
  • Procedia - Social and Behavioral Sciences (Non-ISI/Non-SCOPUS)
  • Research Journal of Applied Sciences, Engineering and Technology (SCOPUS-Indexed)
  • Hwa Jen Yap, Zahari Taha and Siti Zawiah Md Dawal A genetic approach of integrating 3D models into virtual manufacturing.(2012) (ISI-Indexed)
  • Siti Zawiah Md. Dawal, Hilma Raimona Zadry, Sharifah Nadya Syed Azmi, Siti Rusyida Rohim & Sari Julia Sartika (2012) Anthropometric Database for the Learning Environment of High School and University Students, International Journal of Occupational Safety and Ergonomics, 18:4, 461-472, DOI: 10.1080/10803548.2012.11076953 To link to this article: https://doi.org/10.1080/10803548.2012.11076953 (ISI-Indexed)

2011
  • H. R. Zadry, S. Z. Dawal, Z. Taha. Combination of EMG and EEG Measurements in Designing Repetitive Task in Industry. Advanced Science Letters (2011). Vol. 4: 1 5 (ISI-Indexed)
  • M. Mohammadjafari, S. Ahmed, S. Z. Dawal (2011). The Importance of Project Management in SMEs for the Development of New Products through E-Collaboration. African Journal of Business Management . (ISI-Indexed)
  • M. Mohammadjafari, S. Ahmed, S. Z. Dawal (2011). Reducing Time and Cost of New Product Development in SMEs by E-Collaboration through Project Management Approach. Advanced Science Letters. (ISI-Indexed)
  • Zadry, H. R., Dawal, S. Z. M., Taha, Z. 2011. Combination of Electromyography and Electroencephalography Measurements in Designing Repetitive Task in Industry. Advanced Science Letters (ISI-Indexed)
  • Zadry, H. R., Dawal, S. Z. M., Taha, Z. 2011. The Relation Between Upper Limb Muscle and Brain Activity in Two Precision Levels of Repetitive Light Tasks. International Journal of Occupational Safety and Ergonomics (ISI-Indexed)
  • Sari Julia Sartika and Siti Zawiah Md. Dawal. 2011. Investigating the Physiological Effects of Standing, Using a Sit/stand Stool and Standing with a Footrest During Static Tasks. Australian Journal of Basic and Applied Sciences (2011). 5(7): 516-522. 

2010
  • Khairi Yusuf, Y. Nukman, T. M. Yusof, S. Z. Dawal, H. Qin Yang, T. M. I. Mahlia and K. F. Tamrin. Effect of cutting parameters on the surface roughness of titanium alloys using end milling process. Scientific Research and Essays. 4 June 2010; 5(11). (ISI-Indexed)
  • Dawal, S. Z., Santy, Aimi, A., Zadry, H. R. 2010. Investigation of upper limb and lower back muscle activity: Experimental of repetitive task. Journal of Applied Sciences Research (SCOPUS-Indexed)
  • Taha, Z., Sugiyono, Sawada, T. 2010. A comparison of computational and experimental results of Wells turbine performance for wave energy conversion. Applied Ocean Research (SCOPUS-Indexed)
  • Ahmad-Yazid, A., Taha, Z., Almanar, I. P. 2010. A review of cryogenic cooling in high speed machining (HSM) of mold and die steels. Scientific Research and Essays (SCOPUS-Indexed)
  • Taha, Z., Widiyati, K. 2010. Artificial neural network for bearing defect detection based on acoustic emission. International Journal of Advanced Manufacturing Technology (SCOPUS-Indexed)
  • Ebrahim, N. A., Ahmed, S., Taha, Z. 2010. Critical factors for new product developments in SMEs virtual team. African Journal of Business Management (SCOPUS-Indexed)
  • Taha, Z., Passarella, R., Rahim, N. A., Sah, J. M. 2010. Driving force characteristic and power consumption of 4.75 kW permanent magnet motor for a solar vehicle. Journal of Engineering and Applied Sciences (SCOPUS-Indexed)
  • Yusuf, K., Nukman, Y., Yusof, T. M., Dawal, S. Z., Qin Yang, H., Mahlia, T. M. I., et al. 2010. Effect of cutting parameters on the surface roughness of titanium alloys using end milling process. Scientific Research and Essays (SCOPUS-Indexed)
  • Deboucha, A., Taha, Z. 2010. Identification and control of a small-scale helicopter. Journal of Zhejiang University: Science A (SCOPUS-Indexed)
  • Taha, Z., Lelana, H. K., Aoyama, H., Raja Ghazilla, R. A., Gonzales, J., Sakundarini, N., et al. 2010. Insert geometry effects on surface roughness in turning process of AISI D2 steel. Journal of Zhejiang University: Science A (SCOPUS-Indexed)
  • Ahmad-Yazid, A., Taha, Z., Almanar, I. P. 2010. A review of cryogenic cooling in high speed machining (HSM) of mold and die steels. Scientific Research and Essays (ISI-Indexed)
  • Taha, Z., Widiyati, K. 2010. Artificial neural network for bearing defect detection based on acoustic emission. International Journal of Advanced Manufacturing Technology (ISI-Indexed)
  • Taha, Z., Sugiyono, Sawada, T. 2010. A comparison of computational and experimental results of Wells turbine performance for wave energy conversion. Applied Ocean Research (ISI-Indexed)
  • Taha, Z., Lelana, H. K., Aoyama, H., Ghazilla, R. A. R., Gonzales, J., Sakundarini, N., Sutnono, S., et al. 2010. Insert geometry effects on surface roughness in turning process of AISI D2 steel. Journal of Zhejiang University-Science A (ISI-Indexed)
  • Ebrahim, N. A., Ahmed, S., Taha, Z. 2010. Virtual RD teams and SMEs growth: A comparative study between Iranian and Malaysian SMEs. African Journal of Business Management (ISI-Indexed)
  • Ebrahim, N. A., Ahmed, S., Taha, Z. 2010. SMEs; Virtual research and development (RD) teams and new product development: A literature review. International Journal of the Physical Sciences (ISI-Indexed)
  • Ebrahim, N. A., Ahmed, S., Taha, Z. 2010. Critical factors for new product developments in SMEs virtual team. African Journal of Business Management (ISI-Indexed)
  • Yusuf, K., Nukman, Y., Yusof, T. M., Dawal, S. Z., Yang, H. Q., Mahlia, T. M. I., et al. 2010. Effect of cutting parameters on the surface roughness of titanium alloys using end milling process. Scientific Research and Essays (ISI-Indexed)
  • Deboucha, A., Taha, Z. 2010. Identification and control of a small-scale helicopter. Journal of Zhejiang University-Science A (ISI-Indexed)
  • Dawal, S. Z., Santy, Aimi, A., Zadry, H. R. 2010. Investigation of upper limb and lower back muscle activity: Experimental of repetitive task. Australian Journal of Basic and Applied Sciences (SCOPUS-Indexed)
  • H. R. Zadry, S. Z. Dawal, Z. Taha. The relation between upper limb muscle and brain activities in two precision levels of repetitive light tasks. International Journal of Occupational Safety and Ergonomics (2010). (ISI-Indexed)
  • S. Z. Dawal, Santy, A. Aimi, H. R. Zadry. 2010. Investigation of Upper Limb and Lower Back Muscle Activity: Experimental of Repetitive Task. Australian Journal of Basic and Applied Sciences (2010). 4(12): 6244-6253. 
  • M. Mohammadjafari, S. Ahmed, S. Z. Dawal. 2010. The Effects of Electronic Collaboration in Reducing Production Time: Product Design Process in SMEs. Lecture Notes in Engineering and Computer Science (2010). Vol. 2182(1): 1868-1872. 
  • M. Widia and S. Z. Dawal. 2010. The Effect of hand-held Vibrating Tools on Muscle Activity and Grip Strength. Accepted for publication in Australian Journal of Basic and Applied Sciences (2010). 

2009
  • Dawal, S. Z., Taha, Z., Ismail, Z. 2009. Effect of job organization on job satisfaction among shop floor employees in automotive industries in Malaysia. International Journal of Industrial Ergonomics (ISI-Indexed)
  • Dawal, S. Z., Taha, Z., Ismail, Z. 2009. Effect of job organization on job satisfaction among shop floor employees in automotive industries in Malaysia. International Journal of Industrial Ergonomics (SCOPUS-Indexed)

2008
  • S. Z. Dawal, Santy, H. R. Zadry, and S. A. Aziz. Upper limb Muscle Fatigue Prediction using Regression Analysis: A Case Study in Automotive Industry Malaysia. (Final revision for publication to Jurnal Teknologi UTM). (Non-ISI/Non-SCOPUS)
  • S. Z. Dawal, Z. Taha and Z. Ismail. The relation between job characteristics, job organization and environmental factors on job satisfaction in automotive industries in Malaysia. (Sent for publication to Asian Ergonomics Journal). (SCOPUS-Indexed)
  • S. Z. Dawal, Z. Taha and Z. Ismail. Influence of environmental factors on job satisfaction in Malaysian automotive industries. (IEM Journal Malaysia vol. 69, No 3, Sept 2008). (Non-ISI/Non-SCOPUS)

2007
  • Z. Ismail, S. Z. Dawal, and R. Karim. 2007. Manufacturing Challenges in the 9th Malaysia Plan. IEM Jurutera, ISSN 0126-9909, No. 5: 4-9 May. (Non-ISI/Non-SCOPUS)
  • S.Z.Dawal and Z. Taha. 2007. The Effect of Job organizational Factors on Job Satisfaction in Two Automotive Industries in Malaysia. Journal of Human Ergology, 36: 0-00, 2007. (ISI/SCOPUS Indexed Publication)
  • Dawal, S. Z., Taha, Z. 2007. The effect of job organizational factors on job satisfaction in two automotive industries in Malaysia. Journal of human ergology (SCOPUS-Indexed)

2006
  • Mahardika, M., Taha, Z., Suharto, D., Mitsui, K., Aoyama, H. 2006.  Sensor fusion strategy in the monitoring of cutting tool wear.  (ISI-Indexed)
  • Z. Ismail, S. Z. Dawal, and R. Karim (2006). The Fifth Energy Option for Malaysia. IEM Jurutera, ISSN 0126- 9909, No. 7: 16-19, July 2006. (Non-ISI/Non-SCOPUS)
  • Dawal, S. Z., Taha, Z. 2006. The effect of job and environmental factors on job satisfaction in automotive industries. International journal of occupational safety and ergonomics : JOSE. (SCOPUS-Indexed)
  • Dawal, S. Z. M., Taha, Z. 2006. The effect of job and environmental factors on job satisfaction in automotive industries. International Journal of Occupational Safety and Ergonomics (ISI-Indexed)
  • Z. Ismail, S. Z. Dawal, and R. Karim (2006). Engineering and Tourism: Local Opportunities ¿Feature¿. IEM Jurutera, ISSN 0126-9909, No. 12: 14-19, December 2006. (Non-ISI/Non-SCOPUS)
  • Z. Ismail and S. Z. Dawal (2006). Ergonomics in construction Industry. IEM Jurutera, ISSN 0126-9909, No. 10: 26-31, October 2006. (Non-ISI/Non-SCOPUS)
  • Z. Ismail, S. Z. Dawal, and R. Karim (2006). Recent Trends in Engineering Education. IEM Jurutera, ISSN 0126-9909, No. 8: 22-27, August 2006. (Non-ISI/Non-SCOPUS)
  • N. MD. ALI, S. F. SIRAJ, W. N, L. MAHADI, N. SOIN, S. Z. DAWAL. 2006. A PROPOSED MOTIVATION PROGRAM FOR UNDER ACHIEVING STUDENTS AT THE FACULTY OF ENGINEERING, UNIVERSITY OF MALAYA JOURNAL OF EDUCATION IN ENGINEERING ASEEAP Vol. 31(2): 47-54. (Non-ISI/Non-SCOPUS)
  • The Effect of Job and Environmental Factors on Job Satisfaction in Automotive Industries Siti Zawiah Md. Dawal & Zahari Taha Pages 267-280 | Published online: 08 Jan 2015 Download citation https://doi.org/10.1080/10803548.2006.11076687 (ISI-Indexed)
  • SITI ZAWIAH M DAWAL AND Z TAHA. 2006. FACTORS AFFECTING JOB SATISFACTION IN TWO AUTOMOTIVE INDUSTRIES IN MALAYSIA. JURNAL TEKNOLOGY SIRI A UTM. No.44 : 65-80 (ISI-Indexed)

2005
  • Taha, Z., Nazaruddin 2005. Grip strength prediction for Malaysian industrial workers using artificial neural networks. International Journal of Industrial Ergonomics (ISI-Indexed)

2004
  • Dawal, S. Z., Taha, Z. 2004. The relationship between job satisfaction and job factors in industrial work design: a case study of the automotive industries in Malaysia. Journal of human ergology (SCOPUS-Indexed)
  • S.Z. DAWAL AND Z. TAHA THE RELATIONSHIP BETWEEN JOB SATISFACTION AND JOB FACTORS IN INDUSTRIAL WORK DESIGN: A CASE STUDY OF THE AUTOMOTIVE INDUSTRIES IN MALAYSIA JOURNAL OF HUMAN ERGOLOGY 33 1, 2 2004 (ISI-Indexed)
Proceeding

2011
  • Azlis Sani, J. and S. Z. Dawal. 2011. Understanding Human Performance Aspects in Transportation Safety. Proceedings of The 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2011), Singapore. 
  • Azlis Sani, J. and S. Z. Dawal. 2011. Human Performance in Transportation: A Comparative Study of Human Performance Models. Proceedings of The 2011 International Conference on Traffic and Transportation Engineering (ICTTE 2011), Dubai, UAE. 

2010
  • M. Mohammadjafari, S. Ahmed, S. Z. Dawal. 2010. The Relationship between Project Management and E- Collaboration. Proceedings of the 2010 International Conference on Industrial Engineering and Operations Management. Dhaka, Bangladesh, January 9 ¿ 10, 2010. 
  • H. R. Zadry, S. Z. Dawal and Z. Taha. 2010. Effect of Load on Upper limb Muscle and Brain Activity in light Asssembly Task. Proceedings of the International MultiConference of Engineers and Computer Scientist 2010 (IMECS 2010). Hong Kong, 17-19 March 2010. 
  • M. Widia and S. Z. Dawal. 2010. Investigation on Upper limb Muscle Activity and Grip Strength during Drilling Task. Proceedings of the International MultiConference of Engineers and Computer Scientist 2010 (IMECS 2010). Hong Kong, 17-19 March 2010. 
  • H. R. Zadry, S. Z. Dawal and Z. Taha. 2010. Upper Limb Muscle and Brain Activities on Repetitive Light Tasks with Different Level of Pace and Precision. Proceedings of the 10th Asia Pasific Industrial Engineering and Management Systems Conference. Melaka, 7-10 December 2010. 
  • S. J. Sartika and S. Z. Dawal. 2010. A Comparison of the Effect of Using Sit/stand Stool on Prolonged Standing Task. Proceedings of the International MultiConference of Engineers and Computer Scientist 2010 (IMECS 2010). Hong Kong, 17-19 March 2010. 
  • M. A. S. M. Jalil and S. Z. Dawal. 2010. Future Human Performance Model for Malaysian Train Driver. Proceedings of the International MultiConference of Engineers and Computer Scientist 2010 (IMECS 2010). Hong Kong, 17-19 March 2010. 
  • Santy and S. Z. Dawal. 2010. Investigation on Time to fatigue for Upper limb Muscle during A Repetitive Light Assembly Task. Proceedings of the International MultiConference of Engineers and Computer Scientist 2010 (IMECS 2010). Hong Kong, 17-19 March 2010. 
  • K. Dwijayanti and S. Z. Dawal. 2010. A Proposed Study on Facility Planning and Design in Manufacturing Process. Proceedings of the International MultiConference of Engineers and Computer Scientist 2010 (IMECS 2010). Hong Kong, 17-19 March 2010. 
  • K. Yahaya, S. Z. Dawal, H. R. Zadry. 2010. The Study of Effects a Visual Display Terminal on ongoing Brain Power Process using Electroencephalogram (EEG). Proceedings of the 2010 IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES 2010). Kuala Lumpur, 30th November ¿ 2nd December 2010. 
  • M. Mohammadjafari, S. Ahmed, S. Z. Dawal. 2010. The Importance of E-Collaboration in SMEs by Project Management Approach: A Review. Proceedings of the International Congress on Engineering Education ICEED 2010. Kuala Lumpur, Malaysia. 
  • M. Mohammadjafari, S. Ahmed, S. Z. Dawal. 2010. A Conceptual Model for Development of New Product in SMEs by E-collaboration and Project Management. Proceedings of the 10th Asia Pasific Industrial Engineering and Management Systems Conference. Melaka, 7-10 December 2010. 

2009
  • Santy and S. Z. Dawal. 2009. A Study of Upper Limb Muscle Activity on Light Assembly Task at Two Different Work Rates. Proceedings of International Conference of Technical Postgraduates (TECHPOS) 2009. Kuala Lumpur, Malaysia, 14-15 December 2009. 
  • M. Mohammadjafari, S. Ahmed, S. Z. Dawal. 2009. WWW- Based Collaboration in Reducing Production Time in SMEs: A review. Proceedings of the 6th International Conference on Information and Communication Technology Management. Tehran, Iran, 2009. 
  • M. Mohammadjafari, S. Ahmed, S. Z. Dawal and H. Zayandehroodi. 2009. Interdependency between E- collaboration and project management for developing a conceptual model: A review. Proceedings of International Conference of Technical Postgraduates (TECHPOS) 2009. Kuala Lumpur, Malaysia, 14-15 December 2009. 
  • H. R. Zadry, S. Z. Dawal and Z. Taha. 2009. Investigation of upper limb muscle and brain activities on light assembly tasks: A pilot study. Proceedings of International Conference of Technical Postgraduates (TECHPOS) 2009. Kuala Lumpur, Malaysia, 14-15 December 2009. 
  • Sari Julia Sartika and S.Z. Dawal. 2009. Investigation on Lower Leg Muscles Activity and Discomfort on Prolonged Standing Task. Proceedings of International Conference of Technical Postgraduates (TECHPOS) 2009. Kuala Lumpur, Malaysia, 14-15 December 2009. 
  • Mirta Widia and S.Z. Dawal. 2009. The effect of vibration on muscle activity using electric drill. Proceedings of International Conference of Technical Postgraduates (TECHPOS) 2009. Kuala Lumpur, Malaysia, 14-15 December 2009. 
  • Azlis Sani Jalil, S. Z. Dawal and Mohd Shahir Yahya. 2009. General fatigue investigation on Malaysian train drivers. Proceedings of International Conference of Technical Postgraduates (TECHPOS) 2009. Kuala Lumpur, Malaysia, 14-15 December 2009. 
  • Eida Nadirah binti Roslin, S. Z. Dawal and Shamsuddin Ahmed. 2009. Group Decision Making Model: Facing a Facility Layout Selection Problems in Manufacturing Organization. Proceedings of International Conference of Technical Postgraduates (TECHPOS) 2009. Kuala Lumpur, Malaysia, 14-15 December 2009. 
  • S. Z. Dawal, N. M. Zin, and H. R. Zadry. 2009. Investigation on the realtion of mental workload and mental performance: Emphasis on gender. Proceedings of National Symposium on Advancements in Ergonomics and Safety (ERGOSYM 2009). Universiti Malaysia Perlis, Kangar, Perlis, Malaysia, 1-2 December 2009. 
  • S.Z. Dawal and Z. Taha. 2009. Job Satisfaction Model for Manufacturing Industry: Focus on Ergonomics and Human Factors in Work Design. In: 2009 IEEE Toronto International Conference - Science and Technology for Humanity (TIC-STH 2009), Toronto, Ontario, Canada, 26- 27 September 2009. 
  • H.R. Zadry, S.Z. Dawal, and Z. Taha. 2009. Investigation of Upper limb Muscle Activity during Repetitive Light Tasks using Surface Electromyography (SEMG). In: 2009 IEEE Toronto International Conference - Science and Technology for Humanity (TIC-STH 2009), Toronto, Ontario, Canada, 26-27 September 2009. 
  • N. M. Nur and S.Z. Dawal. 2009. Upper Limb and Lower Back Muscle Activity During Prolonged Sitting In: 2009 IEEE Toronto International Conference - Science and Technology for Humanity (TIC-STH 2009), Toronto, Ontario, Canada, 26-27 September 2009. 
  • Mirta Widia, S.Z. Dawal and Fazli. 2009. The effect of hand-held vibrating tools on muscle using bench drill. In the Proceeding of the 17th World Congress in Ergonomics, IEA 2009. Beijing, China, 9-14 August 2009. 
  • Santy and S.Z Dawal. 2009. The Effect Of Cycle Time Reduction On Upper Trapezius Muscles In Light Assembly Task. In the Proceeding the 17th World Congress in Ergonomics, IEA 2009. Beijing, China, 9-14 August 2009. 
  • Santy, Adibah Aimi, S.Z. Dawal. 2009. Effect Of Upper Limb And Lower Back During Prolong Sitting: Emphasis On Work Muscles Envelop. In the Proceeding the 17th World Congress in Ergonomics, IEA 2009. Beijing, China, 9-14 August 2009. 
  • S.Z. Dawal, S.J. Sartika, H.R. Zadry, Y. San, S.N. Makhtar, S.F. Kyasudeen. 2009. Effect of Upper Limb Muscle Activity on Different Horizontal Reach Envelope. In the Proceeding the 17th World Congress in Ergonomics, IEA 2009. Beijing, China, 9-14 August 2009. 
  • Sari Julia Sartika and Siti Zawiah Dawal. 2009. Effect of EMG and Perceived Discomfort on Prolonged Standing with Limited Movements: A Pilot Study. In the Proceeding the 17th World Congress in Ergonomics, IEA 2009. Beijing, China, 9-14 August 2009. 

2008
  • Santy and S. Z. Dawal (2008). Development of Quantitative Assessment System of Muscle Fatigue in Light Assembly Seating Task: A Future Research. Submitted to: The 9th Asia Pasific Industrial Engineering and Management Systems Conference. Bali, Indonesia, 3-5th December 2008. 
  • Santy, Adibah Aimi, and S. Z. Md Dawal (2008). Effect on Upper Limb and Lower Back during Prolong Sitting. Submitted to: The 9th Asia Pasific Industrial Engineering and Management Systems Conference. Bali, Indonesia, 3-5th December 2008 
  • H. R. Zadry, N. M. Zin, and S. Z. Dawal (2008). Electroencephalogram (EEG) - based Estimation on Mental Workload and Fatigue. Submitted to: The 9th Asia Pasific Industrial Engineering and Management Systems Conference. Bali, Indonesia, 3-5th December 2008. 
  • H. R. Zadry, S. Z. Dawal, and Z. Taha (2008). Investigation on Methods to Measure Mental Fatigue in Industries. Submitted to: The 9th Asia Pasific Industrial Engineering and Management Systems Conference. Bali, Indonesia, 3-5th December 2008. 
  • S. Z. Dawal, S. J. Sartika, H. R. Zadry, Y. San, S. N. Makhtar, and S. F. Kyasudeen (2008). Effect of upper limb muscles activity on different reach envelopes. Submitted to: The 9th Southeast Asian Ergonomics Society Conference (SEAES 2008). Bangkok, Thailand, 22-24th October 2008. 
  • S. Z. Dawal and Z. Taha (2007). The Effect of Job characteristics and Job Organization Factors on Job Satisfaction in Automotive Industries. In: Eight Pan Pacific Ergonomics Conference (PPCOE), 17-19 October 2007. 
  • M. Widia and S. Z. Dawal (2008). Study on the method in determining of the effect of hand arm vibration tools in manufacturing industries. Submitted to: The 9th Asia Pasific Industrial Engineering and Management Systems Conference. Bali, Indonesia, 3-5th December 2008. 
  • S. Z. Dawal, M. Widia, and A. H. Azmy (2008). A Study of Prolonged Static Sitting Postures on Lumbar Muscles by Using EMG. Submitted to: The 9th Asia Pasific Industrial Engineering and Management Systems Conference. Bali, Indonesia, 3-5th December 2008. 
  • S. J. Sartika, M. P. Ooi, and S. Z. Dawal (2008). Investigation on the Effect of Prolonged Standing During Repetitive Task Activity. Submitted to: The 9th Asia Pasific Industrial Engineering and Management Systems Conference. Bali, Indonesia, 3-5th December 2008 
  • S. J. Sartika and S. Z. Dawal (2008). Significant Methods in Determining the Effect of Prolonged Standing in Industries. Submitted to: The 9th Asia Pasific Industrial Engineering and Management Systems Conference. Bali, Indonesia, 3-5th December 2008. 
  • 17.S. Z. Dawal, M. Widia, Y. H. Ling, H. R. Zadry (2008). The effect of electric hammer drill hand tool on muscle activity and heart rate measurement. Submitted to: The 9th Southeast Asian Ergonomics Society Conference (SEAES 2008). Bangkok, Thailand, 22-24th October 2008. (Non-ISI/Non-SCOPUS)
  • M. Widia and S. Z. Dawal. 2008. Study on the method in determining of the effect of hand arm vibration tools in manufacturing industries. In the Proceedings of the 9th Asia Pasific Industrial Engineering and Management Systems Conference. Bali, Indonesia, 3-5th December 2008. 
  • N.A Ahmad and S.Z. Dawal. 2008. Development of Anthropometrics seated workstation for children with Cerebral Palsy. In the Proceedings of the 9th Southeast Asian Ergonomics Society Conference (SEAES 2008). Bangkok, Thailand, 22-24th October 2008. 
  • H. R. Zadry and S. Z. Dawal. 2008. Future Research on Muscle and Mental Fatigue in Industry: A Mini Review. In the Proceedings of the 4th Kuala Lumpur International Conference on Biomedical Engineering. 25-28 June 2008. 
  • S. J. Sartika and S. Z. Dawal. 2008. Significant Methods in Determining the Effect of Prolonged Standing in Industries. In the Proceedings of the 9th Asia Pasific Industrial Engineering and Management Systems Conference. Bali, Indonesia, 3-5th December 2008. 
  • S. Z. Dawal, Mirta W., Y. H. Ling, and H. R. Zadry. 2008. The Effect of Bench Drill Laboratory Hand Tool on Muscle Activity and Heart Rate Measurement. In the Proceedings of the 4th Kuala Lumpur International Conference on Biomedical Engineering. 25-28 June 2008. 
  • Santy and S. Z. Dawal. 2008. Development of Quantitative Assessment System of Muscle Fatigue in Light Assembly Seating Task: A Future Research. In the Proceedings of the 9th Asia Pasific Industrial Engineering and Management Systems Conference. Bali, Indonesia, 3-5th December 2008. 
  • Santy, Adibah Aimi, and S. Z. Dawal. 2008. Effect on Upper Limb and Lower Back during Prolong Sitting. In the Proceedings of the 9th Asia Pasific Industrial Engineering and Management Systems Conference. Bali, Indonesia, 3-5th December 2008. 
  • H. R. Zadry, N. M. Zin, and S. Z. Dawal. 2008. Electroencephalogram (EEG) - based Estimation on Mental Workload and Fatigue. In the Proceedings of the 9th Asia Pasific Industrial Engineering and Management Systems Conference. Bali, Indonesia, 3-5th December 2008. 
  • R. Zainon@Md.Ali and S.Z.Dawal. 2008. Significant Musculoskeletal (MSD) Factor to Intensive Computer User. In the Proceedings of the 9th Southeast Asian Ergonomics Society Conference (SEAES 2008). Bangkok, Thailand, 22- 24th October 2008. 
  • H. R. Zadry, S. Z. Dawal, and Z. Taha. 2008. Investigation on Methods to Measure Mental Fatigue in Industries. In the Proceedings of the 9th Asia Pasific Industrial Engineering and Management Systems Conference. Bali, Indonesia, 3-5th December 2008. 
  • R. Zainon@Md.Ali and S.Z.Dawal. 2008. Cervical spondylosis symptoms and neck pain among computer users. In the Proceedings of the 9th Asia Pasific Industrial Engineering and Management Systems Conference. Bali, Indonesia, 3-5th December 2008. 
  • N.A Ahmad and S.Z.Dawal. 2008. Investigation on Various Types of Assistive Technology (AT) At special school in Malaysia. In the Proceedings of the 9th Asia Pasific Industrial Engineering and Management Systems Conference. Bali, Indonesia, 3-5th December 2008. 
  • S. Z. Dawal, S. J. Sartika, H. R. Zadry, Y. San, S. N. Makhtar, and S. F. Kyasudeen. 2008. Effect of upper limb muscles activity on different reach envelopes. In the Proceedings of the 9th Southeast Asian Ergonomics Society Conference (SEAES 2008). Bangkok, Thailand, 22- 24th October 2008. 
  • S. Z. Dawal, M. Widia, Y. H. Ling, H. R. Zadry. 2008. The effect of electric hammer drill hand tool on muscle activity and heart rate measurement. In the Proceedings of the 9th Southeast Asian Ergonomics Society Conference (SEAES 2008). Bangkok, Thailand, 22-24th October 2008. 
  • S. J. Sartika, M. P. Ooi, and S. Z. Dawal. 2008. Investigation on the Effect of Prolonged Standing During Repetitive Task Activity. In the Proceedings of the 9th Asia Pasific Industrial Engineering and Management Systems Conference. Bali, Indonesia, 3-5th December 2008. 
  • S. Z. Dawal, M. Widia, and A. H. Azmy. 2008. A Study of Prolonged Static Sitting Postures on Lumbar Muscles by Using EMG. In the Proceedings of the 9th Asia Pasific Industrial Engineering and Management Systems Conference. Bali, Indonesia, 3-5th December 2008. 

2007
  • S. Z. Dawal, Z. Ismail, H.R. Zadry, Y. San, S.N. Makhtar, and S.F. Khyasudeen (2007). Study on the effect of workspace reach envelopes during repetitive activity. In: International Conference on Ergonomics (ICE 2007), 3-5 December 2007, Kuala Lumpur, Malaysia. (ISI-Indexed)
  • H.R. Zadry and S. Z. Dawal (2007). Muscle and Mental Fatigue on Repetitive Tasks in Industry: A Mini Review. In: International Conference on Ergonomics (ICE 2007), 3-5 December 2007, Kuala Lumpur, Malaysia. (ISI-Indexed)
  • S. Z. Dawal, Z. Taha, and H.R. Zadry (2007). Job satisfaction, job characteristics and Job organization factors of shop floor operators in automotive manufacturing industries. In: International Conference on Ergonomics (ICE 2007), 3-5 December 2007, Kuala Lumpur, Malaysia. (ISI-Indexed)
  • S. Z. Dawal, Shin. Y.L, Makhtar. N. and Z. Ismail (2007). The relation between mental processing and upper limb muscle activity in repetitive work. In: Eight Pan Pacific Ergonomics Conference (PPCOE), 17-19 October 2007. (ISI-Indexed)
  • S. Z. Dawal and Z. Taha (2007). The Effect of Job characteristics and Job Organization Factors on Job Satisfaction in Automotive Industries. In: Eight Pan Pacific Ergonomics Conference (PPCOE), 17-19 October 2007. (ISI-Indexed)
  • S. Z. Dawal, N. Soin, W. N. W. Mahadi, N. M. Ali, N. Mohd, S. A. Aziz, M. Yusof, and Z. Ismail (2006). A Study of EMG measurements on biceps muscles during repetitive task at automotive industry. In: The Third Biomed International Conference. 11-14 December 2006, Kuala Lumpur, Malaysia. (CD version). 
  • S. Z. Dawal, N. Soin, W. N. W. Mahadi, N. M. Ali, N. Mohd, S. A. Aziz, M. Yusof, and Z. Ismail (2007). EMG measurements on biceps brachii and upper trapezius muscles at a tyre assembly: A Pilot Study in Malaysia. In: The Second International Engineering Convention (IntEC2007). 12¿14 March 2007, Jeddah Saudi Arabia. (ISI-Indexed)
  • S. Z. Dawal, N. Y. Choon, and R. Zainon@Md. Ali (2007). Anthropometry Measurements for Office Workstation Design. In: International Conference on Ergonomics (ICE 2007), 3-5 December 2007, Kuala Lumpur, Malaysia. (ISI-Indexed)
  • S.Z. Dawal, M. I. Khalil, and N.A. Ahmad (2007). A Study on Learning Workstation For Children With Cerebral Palsy. In: International Conference on Ergonomics (ICE 2007), 3-5 December 2007, Kuala Lumpur, Malaysia. (ISI-Indexed)
  • S. Z. Dawal, Y.H. Ling, and H.R. Zadry (2007). Investigation on the effects of vibration on upper limb muscles. In: International Conference on Ergonomics (ICE 2007), 3-5 December 2007, Kuala Lumpur, Malaysia. (ISI-Indexed)
  • W. N. W. Mahadi, A. Rashid, N. M. Ali, N. Soin N. and S. Z. Dawal (2006). Biological Effect of EMF in Engineering teaching laboratories: (A Review). In: The Third Biomed International Conference. 11-14 December 2006, Kuala Lumpur, Malaysia. (CD version). (ISI-Indexed)

2006
  • Ahmad Yazid, S.Z.Dawal, S.N.Musa (2006). Research Product Commercialization, the Dirts and the Opportunity for Capitalizing Local Fundings. Proceedings of the 8th Asean University Network/South east Asian Engineering Education Network Fieldwise Seminar in Manufacturing Engineering, Laos. 
  • Z. Ismail, S. Z. Dawal, and R. Karim (2006). Importance of code of ethics education for Engineers. In: 24th Conference of Asean Federation of Engineering Organisations. 29 November¿2 December, Sunway lagoon, Selangor. 
  • Z. Ismail, S. Z. Dawal, and R. Karim (2006). Technology Transfer in the Malaysian Oil and Gas Industry. In: 24th Conference of Asean Federation of Engineering Organisations. 29 November¿2 December, Sunway lagoon, Selangor. 
  • S.Z. Dawal and Z. Taha (2006). Factors Affecting Job Satisfaction in Industrial work design: Emphasis on Regression Analysis Model. In: International conference on Manufacturing and Material Processing (ICMM). 14-15 March 2006, Kuala Lumpur, Malaysia. (CD version). (ISI-Indexed)
  • S.Z. Dawal and Z. Taha (2006). The effect of job organizational factors on job satisfaction in two automotive industries in Malaysia. In: Ergonomics Conference. 11-13 August 2006, Bali, Indonesia. (ISI-Indexed)

2005
  • S.Z. Dawal, Z. Taha, Z. Ismail and M.Firdaus The Influence of environment factors on job satisfaction in automotive industries in Malaysia . Proceeding in The National Seminar on Advanced Processes and Systems in Manufacturing (APSIM) 2005,Bangi Malaysia. 

2003
  • S. Z. Dawal and Z. Taha (2003). Effects of Social Factors on employees¿ satisfaction in automotive industrial work design: a case study in Malaysia. In: The 7th Southeast Asian Ergonomics society and 4th Malaysian Ergonomics conference on ¿Ergonomics Design Innovative for Regional Property. 19-22 May 2003, Kuching Sarawak, pp. 199¿204. (CD version). 
  • S. Z. Dawal and Z.Taha (2003). Effects on job factors on satisfaction in mass and medium volume production in automotive industry: Implications for job design. In: The XVth Trienal Congress of the International Ergonomics Association and 7th joint conference of Ergonomics Society of Korea/Japan Ergonomics Society. 24¿29 August 2003, Seoul Korea. (CD Version). 

2001
  • S. Z. Dawal and Z. Taha (2001). Factors affecting Work System Design in Automotive Industries: A case study of Malaysia. In: The 6th Pan Pacific Conference on Occupational Ergonomics. 21-24 August 2001, Beijing, China. 
  • S. Z. Dawal and Z. Taha (2001). Current approach to industrial work design models. In: Malaysian Ergonomics Conference 2001. 17-18 April 2001, Penang. 

1999
  • Z. Ismail, Z. Ibrahim, and S. Z. Dawal (1999). Modelling Population Densities of Cockles. In: The World Engineering Congress 1999. 
  • S. Z. Dawal, Z. Ismail, and N. Zulkifli (1999). A Simple and Affordable Technique towards Automation in Small and Medium Scale Industry. In: The World Engineering Congress 1999. 

1997
  • S. Z. Dawal, Jaafar Z., Ali Z., and Choon N. Y. (1997). Workspace design for a Cellular Manufacturing Layout for Small and Medium Scale Industries in Malaysia. In: The 13th Thriennial Congress of the International Ergonomics Association Tampere, Finland 1997. 
  • S. Z. Dawal, Ismail S., Jaafar Z., Choon N. Y., Samson H (1997). Ergonomics and Distance Learning Education in Malaysia. In: The 13th Thriennial Congress of the International Ergonomics Association Tampere, Finland 1997. 

1996
  • S. Z. Dawal and Z. Ali (1996). Rekabentuk Sistem Pembuatan Bersel untuk industri kecil dan sederhana di Malaysia. In: Malaysia R&D Commercialisation Seminar. 15-17 August 1996, Kuala Lumpur. 

1995
  • S. Z. Dawal, Z. Ismail, S.B. Baharin, and K. W. Heng (1995). Computer Aided Learning Package for Teaching and Tutorial in Microprocessor for Distance Learning. In: Persidangan Penerapan Sains dan Teknologi Dalam Pembangunan Masyarakat. 19- 21-December 1995. 
Technical Report

2007
  • Z. Ismail, S. Z. Dawal, and R. Karim (2007). Maintenance-related Disaster Cases in the Oil and Gas Industry. IEM Jurutera, ISSN 0126-9909, No. 9: 14-19 September 2007. (Non-ISI/Non-SCOPUS)
List of Written Works That Have Not Been Published

2005
  • Siti Zawiah Md Dawal. 2005. A Study of Ergonomics Factors Affecting Job satisfaction in Work Design For Automotive Industries In Malaysia. Unpublished doctoral thesis, University of Malaya (Non-ISI/Non-SCOPUS)

AREAS OF RESEARCH
(Project title), (Role), (From)-(Until), (Level), (Source).


  • Inclusive Ergonomics Wudu Station for person with disabilities at Mosques in Malaysia, Principal Investigator(PI), 2020 - 2020, ITRG grant
  • Ergonomics Smart Shoe sorter application at Masjid, Principal Investigator(PI), 2019 - 2020, ITRG grant
  • DRIVING BEHAVIOUR AND REACTION RATE OF AGEING MALAYSIAN AUTOMOBILE DRIVERS, PI, 2016 - 2018, Postgraduate Research Grant (PPP) - Research, (National)
  • The Relationship between Ageing Drivers Mental Workload and Driving Performance on Driving Task Related Factors, PI, 2016 - 2019, Postgraduate Research Grant (PPP) - Research, (National)
  • INVESTIGATION ON MANUAL MATERIAL HANDLING TASK AT ADVANCE MANUFACTURING TECHNOLOGY, PI, 2016 - 2019, Postgraduate Research Grant (PPP) - Research, (National)
  • Social Aspect Of Pollution Loading Reduction Of Grey-water, PI, 2015 - 2018, Geran Penyelidikan Universiti Malaya (UMRG Programme) - SUS (Sustainability Science), (University)
  • Social Aspect Of Pollution Loading Reduction Of Grey-water, Co-Researcher, 2015 - 2018, Geran Penyelidikan Universiti Malaya (UMRG Programme) - SUS (Sustainability Science), (University)
  • Development Of Wudu' (ablution) Workstation For Elderly & Disabled Person, PI, 2015 - 2018, Geran Penyelidikan Universiti Malaya (UMRG Programme) - SBS (Equitable Society), (University)
  • Design & Application Of Ablution Workstation For Elderly & Disabled Person, PI, 2015 - 2018, Geran Penyelidikan Universiti Malaya (UMRG Programme) - SBS (Equitable Society), (University)
  • Design & Application Of Ablution Workstation For Elderly & Disabled Person, Co-Researcher, 2015 - 2018, Geran Penyelidikan Universiti Malaya (UMRG Programme) - SBS (Equitable Society), (University)
  • Development Of Wudu' (ablution) Workstation For Elderly & Disabled Person, Principal Investigator(PI), 2015 - 2018, Geran Penyelidikan Universiti Malaya (UMRG), (University)
  • Study Of Sustainable Learning Environment In Higher Learning Institution For Lower Limb Disabled Population-focus On Ergonomics Learning Facilities, PI, 2014 - 2016, Program Rakan Penyelidikan UM, (University)
  • Modeling, Simulation and Optimization of Spine Layout Design for Flexible Manufacturing System using Fuzzy Logics in Virtual Reality-based Platform, Co-Researcher, 2013 - 2014, Program Rakan Penyelidikan UM, (University)
  • The Malaysian Elders Longitudinal Research (MELoR) Study (UM.C/625/1/HIR/ASH/02), Principal Investigator(PI), 2013 - 2016, High Impact Research (HIR), (University)
  • Integrated Production Planning And Decision Analysis Systems For Smes., PI, 2012 - 2016, High Impact Research - Ministry of Education (HIR-MOE) Cycle 2, (National)
  • Integrated Production Planning and Decision Analysis Systems for SMEs, Principal Investigator(PI), 2012 - 2016, High Impact Research (HIR), (National)
  • ERGONOMIC WORK STATION DESIGN FOR MANUFACTURING INDUSTRY, PI, 2012 - 2015, Fundamental Research Grant Scheme (FRGS), (National)
  • The Malaysian Falls Assessment and Intervention Trial (myFAIT), Co-Investigator, 2012 - 2015, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • Ergonomics workstation Design for manufacturing industries, Principal Investigator(PI), 2012 - 2014, Fundamental Research Grant Scheme (FRGS), (National)
  • Incoporating cultural aspect in sustainable product design (working title), Co-Investigator, 2011 - 2014, AUN/SEED-Net, (National)
  • An Investigation into a sustainable manufacturing strategy practices by Malaysian manufacturers, Co-Investigator, 2011 - 2013, Fundamental Research Grant Scheme (FRGS), (National)
  • THERMAL SHOCK BEHAVIOR OF MULLITE-ZIRCONIA COMPOSITE OBTAINED BY ELECTROPHORETIC, Supervisor, 2010 - 2011, Postgraduate Research Grant (PPP) - Research, (National)
  • AN ERGONOMIC KHB WORKSTATION DEVELOPMENT FOR SECONDARY SCHOOL IN MALAYSIA, Supervisor, 2010 - 2011, Postgraduate Research Grant (PPP) - Research, (National)
  • DEVELOPMENT OF THERMAL INDEX TO PREDICT WORKERS COMFORT AND PERFORMANCE IN MALAYSIAN INDUSTRIES, Supervisor, 2010 - 2011, Postgraduate Research Grant (PPP) - Research, (National)
  • DEVELOPMENT OF ERGONOMICS COMPUTER WORK STATION FOR DISABLE AND ELDERLY: FOCUS ON SUSTAINABLE ERGONOMICS, PI, 2010 - 2012, Fundamental Research Grant Scheme (FRGS), (National)
  • A STUDY OF OCCUPATIONAL ENVIRONMENTAL FACTORS AT TOLL PLAZA, Supervisor, 2010 - 2011, Postgraduate Research Grant (PPP) - Research, (National)
  • Investigating and Developing an Integrated Material Efficiency Strategy Framework and Tool for Malaysian Industry, Co-Investigator, 2010 - 2013, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • COASTAL MANAGEMENT; USING HARD AND SOFT ENGINEERING TECHNIQUES TO CONTROL EROSION, Supervisor, 2010 - 2011, Postgraduate Research Grant (PPP) - Research, (National)
  • Experimental Design and Analysis of Fuselage Structure of Jet Aircraft, Co-Investigator, 2009 - 2011, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • Experimental Design and Analysis of Fuselage Structure of Jet Aircraft, Co-Investigator, 2009 - 2012, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • Conceptual Design of Experimental Jet Aircraft for Civil Aviation, Principal Investigator(PI), 2009 - 2010, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • DEVELOPMENT OF A QUANTITATIVE ASSESSMENT SYSTEM FOR MUSCLE AND MENTAL FATIGUE ON REPETITIVE TASK IN INDUSTRY, Supervisor, 2009 - 2010, Postgraduate Research Grant (PPP) - Research, (National)
  • A STUDY ON THE EFFECT OF PRONOLGED STANDING ON PHYSIOLOGICAL AND PERCEIVED DISCOMFORT, Supervisor, 2009 - 2010, Postgraduate Research Grant (PPP) - Research, (National)
  • URINARY TRACT INFECTION IN HYPEREMESIS GRAVIDARUM, Supervisor, 2009 - 2009, Postgraduate Research Grant (PPP) - Research, (National)
  • UPPER LIMB AND LOWER BACK MUSCLE ACTIVITY DURING PROLONGED SITTING, Supervisor, 2009 - 2010, Postgraduate Research Grant (PPP) - Research, (National)
  • UPPER LIMB AND LOWER BACK MUSCLE ACTIVITY DURING PROLONGED SITTING, Supervisor, 2009 - 2010, Postgraduate Research Grant (PPP) - Research, (National)
  • ERGONOMICS APPROACH ON COCKPIT AND CABIN DESIGN, PI, 2009 - 2011, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • A STUDY ON THE EFFECT OF HAND ARM VIBRATION TOOLS ON PYHSIOLOGICAL FACTORS IN INDUSTRY, Supervisor, 2009 - 2010, Postgraduate Research Grant (PPP) - Research, (National)
  • A STUDY ON THE EFFECT OF HAND ARM VIBRATION TOOLS ON PYHSIOLOGICAL FACTORS IN INDUSTRY, Supervisor, 2009 - 2010, Postgraduate Research Grant (PPP) - Research, (National)
  • A STUDY ON THE EFFECT OF PRONOLGED STANDING ON PHYSIOLOGICAL AND PERCEIVED DISCOMFORT, Supervisor, 2009 - 2010, Postgraduate Research Grant (PPP) - Research, (National)
  • CONCEPTUAL DESIGN OF EXPERIMENTAL JET AIRCRAFT FOR CIVIL AVIATION, PI, 2009 - 2011, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • DEVELOPMENT OF FATIGUE MODEL FOR UPPER LIMB MUSCLE DURING LIGHT ASSEMBLY TASK, Supervisor, 2009 - 2010, Postgraduate Research Grant (PPP) - Research, (National)
  • DEVELOPMENT OF FATIGUE MODEL FOR UPPER LIMB MUSCLE DURING LIGHT ASSEMBLY TASK, Supervisor, 2009 - 2010, Postgraduate Research Grant (PPP) - Research, (National)
  • HANDLING CHIP CARRIER: ERGONOMICS ANALYSIS, DESIGN & DEVELOPMENT, Supervisor, 2009 - 2010, Postgraduate Research Grant (PPP) - Research, (National)
  • HANDLING CHIP CARRIER: ERGONOMICS ANALYSIS, DESIGN & DEVELOPMENT, Supervisor, 2009 - 2010, Postgraduate Research Grant (PPP) - Research, (National)
  • DEVELOPMENT OF MALAYSIAN TRAIN DRIVER PERFORMANCE MODEL, Supervisor, 2009 - 2010, Postgraduate Research Grant (PPP) - Research, (National)
  • THE ROLE OF E-COLLABORATION EFFECT IN DISTRIBUTED PROJECT MANAGEMENT, Supervisor, 2009 - 2010, Postgraduate Research Grant (PPP) - Research, (National)
  • A MODEL OF FACILITY LAYOUT DESIGN FOR MANUFACTURING INDUSTRY IN MALAYSIA, Supervisor, 2009 - 2011, Postgraduate Research Grant (PPP) - Research, (National)
  • A MODEL OF FACILITY LAYOUT DESIGN FOR MANUFACTURING INDUSTRY IN MALAYSIA, Supervisor, 2009 - 2011, Postgraduate Research Grant (PPP) - Research, (National)
  • PREDICITION TIME TO MUSCLE FATIGUE DURING SEATED REPETITIVE TASK IN MANUFACTURING INDUSTRIES, Supervisor, 2008 - 2009, Postgraduate Research Grant (PPP) - Research, (National)
  • Development of an environmental index to predict workers comfort, performance and productivity in Malaysian industries, Principal Investigator(PI), 2008 - 2010, MOSTI, (National)
  • DEVELOPMENT OF A QUANTITATIVE ASSESSMENT SYSTEM FOR MUSCLE AND MENTAL FATIGUE ON REPETITIVE TASKS IN INDUSTRY., Supervisor, 2008 - 2009, Postgraduate Research Grant (PPP) - Research, (National)
  • DEVELOPMENT OF A CONDUCIVE LEARNING ENVIROMENT FOR STUDENT WITH LEARNING DISABILITIES, Supervisor, 2008 - 2009, Postgraduate Research Grant (PPP) - Research, (National)
  • Study and Developing a learning workstation for Children with Cerebral palsy
  • AN INVESTIGATION ON NECK PAIN AND SPONDYLOSIS SYMPTOMS AMONG VISUAL DISPLAY UNIT (VDU) USERS, Supervisor, 2008 - 2009, Postgraduate Research Grant (PPP) - Research, (National)
  • Investigation on AT Work station for disable children
  • THE STUDY ON THE EFFECT OF HAND ARM VIBRATION TOOLS ON PHYSIOLOGICAL FACTORS IN MANUFACTURING INDUSTRY, Supervisor, 2008 - 2010, Postgraduate Research Grant (PPP) - Research, (National)
  • Anthropometry Measurements for Malaysian Adults and children and elderly (Data Collections)
  • AN INVESTIGATION OF MENTAL WORKLOAD ON ONGOING BRAIN POWER PROCESS USING ELECTROENCEPHALOGRAM (EEG), Supervisor, 2008 - 2010, Postgraduate Research Grant (PPP) - Research, (National)
  • A STUDY AND DEVELOPMENT OF AN ERGONOMICS SEDENTARY WORK STATION FOR MSD (MUSCULOSKELETAL DISORDER) SYMPTOMS ON CERVICAL SPONDYLOSIS, PI, 2008 - 2009, RU Geran, (National)
  • A STUDY ON THE EFFECT OF PROLONGED STANDING ON PHYSIOLOGICAL AND PERCEIVED DISCOMFORT, Supervisor, 2008 - 2009, Postgraduate Research Grant (PPP) - Research, (National)
  • DESIGN OF VIBRATION HANDTOOLS IN MANUFACTURING INDUSTRIES BASED ON ASTATISTICALMODEL FOR UPPER LIMB MUSCLE FATIGUE, PI, 2007 - 2008, MOSTI-Science Fund, (National)
  • A STUDY ON PROLOG STANDING AND MUSCULOSKELETAL DISORDERS IN MANUFACTURING INDUSTRIES, PI, 2007 - 2009, Fundamental Research Grant Scheme (FRGS), (National)
  • Development of a quantitative assessment system for mental and upper limb muscle fatigue on repetitive task load in manufacturing industries, Principal Investigator(PI), 2006 - 2008, ScienceFund, (National)
  • Design and development of wudu workstation for OKU and eldelry people

CONSULTATION PROJECT/CONSULTANCY
(Project title), (Role), (From)-(Until), (Organisation).


  • A survey on mental workload and MSD at LZS, Project Leader, 2019-2020, Lembaga Zakat Selangor Malaysia
  • Research on Mental Workload and Mental Fatigue among service sector in Malaysia, Project Leader, 2019-2020, NIOSH Bangi Malaysia
  • Ergonomics and Safety at Work Place, Expert Advisor, 2019-2019, Sunlife Malaysia
  • Mental workload and mental fatigue in service in Malaysia, Consultant, 2019-2020, NIOSH
  • Ergonomics design and analysis for seat comfort in airplane, Consultant, 2016-2018, AIRBUS - AMICS
  • Board of Engineers (BEM) survey and analysis on number of engineers in Malaysia, Consultant, 2014-2016, BEM Malaysia
  • mycabin PROTON BERHAD, Consultant, 2012-2013, PROTON BERHAD
  • Effect of Cantas on User s Health, 2011-09-01-2011-09-01, Malaysian Palm Oil Board (MPOB)
  • Feasibility Study on The Establishment of the National Product Safety Testing Laboratory, 2011-09-01, Jabatan Standard Malaysia
  • Feasibility study on the establishment of the national product safety testing laboratory, Coordinator, 2011-2012, Industries/ UPUM
  • Effect of Cantas on Human, External Examiner, 2010-2011, MPOB

AWARDS AND RECOGNITIONS
(Name of Award), (Awarding Institution), (Year Awarded), (Level).


  • Citrcx 2020 (Gold) Maximum Acceptable Lifting Frequency Model in Manual Material Handling Task., University Malaysia Pahang (Ump), 2020, (University)
  • Ahli Jawatankuasa Pengajian Program Akademik Sarjana Muda Kejuruteraan Industri - Utem , Utem, 2019, (National)
  • Recognition as a Visiting Professor and Invited Speaker At University Brawijaya Indonesia (in Ergonomics and Humanfactors ), University Brawijaya Indonesia, 2019, (International)
  • 8th Exposition On Islamic Innovation (I-Inova) 2018 , University Sains Islam Malaysia (Usim), 2018, (National)
  • Pecipta 2017- Portable Wudu Workstation , Kementerian Pendidikan, 2017, (National)
  • Iidex 2016 - Invention , Innovation & Design Exposition (Gold Award), Uitm Malaysia, 2016, (National)
  • Certificate of Excellent Service, University Malaya, 2015, (University)
  • Sijil Penghargaan Sebagai Panel Penilai Seminar Hep Kebangsaan Kolej Komuniti 2015, Jabatan Kolej Komuniti Kementerian Pendidikan Tinggi, 2015, (Government)
  • Best Paper Award, 9th International Conference On Intelligent Manufacturing and Logistics Systems (Iml 2013), 2013, (International)
  • Khidmat Setia 20 Award, 2012
  • University of Malaya Research Exibition, 2009, University of Malaya, 2009, (National)
  • Excellence Service Award, University Malaya, 2008, (University)
  • Anugerah Khidmat Cemerlang Universiti Malaya, Universiti Malaya, 2008, (University)
  • 18th International Invention, Innovation & Technology Exhibition Itex 2007, 18th International Invention, Innovation & Technology Exhibition Itex 2007, 2007, (International)

PRESENTATIONS
(Title), (Event), (Date Presented), (Organiser), (Level).


PLEANARY/KEYNOTE SPEAKER
  • New Umbrella- Manufacturing System , AUNSEED-NET Field Wise Seminar,   to  , AUNSEED-NET
  • Promotional Trip on Collaboration research between UM and Philippine Universities, Scientific Meeting,   to  , AUNSEED-NET-UM, (International)
  • Collaboration Research between UM and Japanese Universities, Scientific Meeting,   to  , UM, KEIO and TOKAI Universities, (International)
INVITED SPEAKER
  • Ergonomics Awareness at workplace, Ergonomics day,   to  , Glaxo Smith Kline Ltd, Kuala Lumpur, (National)
EVENT ORGANISER
  • Factors Affecting job Satisfaction in industrial work design -regression Model, ICMM KL,   to  , AUNSEED-NET-UM, (International)
PRESENTER
  • Effects of social factors on employees satisfaction, 7th Southeast Asian Ergonomics society,   to  , University Malaysia Sarawak, (International)
  • Effects of job factors on mass and medium volume production , XVth Trienal Congress of International Ergonomics,   to  , IEA, (International)
  • Proposal of new umbrella under manufacturing system, AUNSEED-NET Bangkok,   to  , ChulaLongkorn University, (International)
  • EMG measurements on biceps brachii and upper trapezius muscles at a tyre assembly : Pilot Study in Malaysia, 2nd International Engineering Convention (IntEC2007),   to  , IntEC , (International)
  • Ergonomics and Distance learning education in Malaysia, 13th Triennial Congress of the international Ergonomics,   to  , IEA, (International)
  • Work System Design in Automotive Industries, The 6th Pan Pacific Conference on Occupational ergonomics, 2001-08-21 to  , IEA, (International)
OTHERS
  • H.R. Zadry and S. Z. Dawal (2007). Muscle and Mental Fatigue on Repetitive Tasks in Industry: A Mini Review. In: International Conference on Ergonomics (ICE 2007), 3-5 December 2007, Kuala Lumpur, Malaysia., International Ergonomics Conference,   to  , Dept of Engineering design and Manufacture, UM, (International)
  • Session on Ergonomics section, International Conference APIEM Bali Dec 2008 ,   to 2008-12-05, (International)
  • Invited Japanese Professors Keynote Speaker, Aunseed net seminar for Manufacturing in Manila , 2008-11-24 to 2008-11-25, (International)
  • Workstation design in automotive industries, 2nd International Conference on Ergonomics, 2013-09-02 to 2013-09-04, UNiversity Malaya, (International)
  • Driving Sustainable human Performance , 3rd International Conference on Ergonomics and 1st Industrial Engineering , 2015-08-19 to 2015-08-20, Orkid Research Group, University Malaya, (International)
  • Bengkel IAP & Jawatankuasa Pengajian BMFI - Penganjur UTEM, Bengkel IAP & Jawatankuasa Pengajian BMFI - Penganjur UTEM, 2020-12-05 to 2020-12-05, UTEM, (National)

EXPERT LINKAGES
(Linkages Description), (Organisation), (Year of Involvement), (Duration), (Level).


  • Ahli jawatankuasa pengajian Program Akademik Sarjana Muda Kejuruteraan Industri (BMFI), Universiti Teknikal Malaysia Melaka (UTEM), 2020, 36, (National)
  • Lead Consultant on Project : Mental Workload and Mental Fatigue in service sector in Malaysia, NIOSH BANGI , 2019, 16, (National)
  • Visiting professor on Ergonomics Expert, University Briwijaya, Indonesia, 2019, 0.3, (International)
  • External Examiner for PHD, UKM, 2018, 1, (National)
  • UKM External Examiner -PHD, UKM, 2016, 3, (National)
  • Examiner PHD - UTM, UTM, 2016, (National)
  • Rakan Penyelidikan UM - UNISZA, UNISZA, 2015, 2016, (National)
  • Research Collaboration (Mentor) in ergonomics research with UNIMAS, UNIMAS, 2015, 2017, (National)
  • High Impact Collaboration Research and Supervision, Loughborough University and UM, 2013, 36, (International)
  • Collaboration on High Impact Research, AUNSEEDNET JAPAN, 2013, 36, (International)
  • external examiner, UKM, 2013, 3, (National)
  • co-editor, transtech publication - Current Trend in Ergonomics, 2013, 12, (International)
  • reviewer - jurnal Teknologi, University Kebangsaan Malaysia, 2012, 3, (National)
  • Research Collaboration UM & Loughborough University UK, High Impact research, 2012, 60, (International)
  • reviewer - jurnal Teknologi, Universiti kebangsaan Malaysia, 2012, 3, (National)
  • Collaboration research International, AUNSEEDNET, 2011, 36, (International)
  • Collaboration research -Aunseed net, ITB (InstitutTechnologi Bandung) Indonesia, 2008, 24, (International)
  • Collaboration research - Aunseednet, University Gajah Mada , 2008, 24, (International)
  • Collaboration Research- Aunseed Net, KEIO University Japan, 2008, 24, (International)
  • Research Collaboration - Aunseed net, De La Salle University Philipine , 2008, 24, (International)
  • Collaborative Research - Aunseed net, Tokai University , 2007, 36, (International)
  • Collaboration Research, Modenas Berhad, 2004, 1, (National)
  • Collaboration Research, Perodua , 2003, 1, (National)
  • Collaboration Research, Proton berhad, 2002, 3, (National)

EXPERT/TECHNICAL CONTRIBUTIONS
(Activity), (Organisation), (Role), (From)-(Until), (Level).


  • Jawatankuasa pegajian program akademi sarjana muda kejuruteraan industri -UTEM, UTEM, Committee Member, 2019-2022, (National)
  • Guess Lecture, Biomedical Science UM, Guess Lecture, 2019-2020, (University)
  • Project on Mental Workload and mental fatigue in service sector in Malaysia, NIOSH BANGI MALAYSIA, Expert Advisor, 2019-2020, (National)
  • Research on Mental workload and MSD on office workers, Lembaga Zakat Selangor, Project Leader, 2019-2020, (National)
  • Ahli Jawatankuasa Pengajian Program BMFI UTEM., Universiti Teknikel Malaysia Melaka (UTEM), Technical Advisor, 2019-2020, (National)
  • DEVELOPMENT OF ANTHROPOMETRIC DATABASE FOR WORKING AGE POPULATION", NIOSH BANGI MALAYSIA, Expert Advisor, 2019-2020, (National)
  • Research on Mental Workload and mental Fatigue for service sector in Malaysia, NIOSH BANGI MALAYSIA, Technical Advisor, 2019-2020, (National)
  • Technical and Expert Advisor on Wudu project development, University Malaya and KIRD organisation, Expert Advisor, 2017-2018, (National)
  • Ahli Panel bagi kluster Penyelidikan AET, UM, Committee Member, 2013-2014, (University)
  • Ahli Jawatankuasa Penilaian FRGS dan ERGS, UM, Committee Member, 2013-2018, (University)
  • Technical Advisory Panel for Industrial Project, UM, Advisor, 2013-2013, (University)
  • Panel Industri, UTM, Expert Advisor, 2013-2013, (National)
  • High Impact Collaboration Research and Supervision, High Impact Research UM, Project Leader, 2012-2016, (International)
  • SIRIM ISO - Standard for Ergonomics safety and Health, SIRIM Berhad, Technical Advisor, 2008-2019, (National)
  • National Occupational Skill Standard (NOSS) Development for lift and escalator in Malaysia, Skill Development, Ministry of Human Resources Malaysia, Committee Member, 2006-2007, (National)

EVALUATION ACTIVITIES
(Description), (Evaluation Activity),(Year).


  • Panel evaluator for research Planning (Skim Penyelidikan Pasca Doktoral) Bahagian Sains Teknologi dan Inovasi, Kementerian sains Teknologi dan Inovasi, Post-doctoral Research Planning ,  ( )
  • Energetic Requirement, muscle fatigue and musculoskeletal risk of prolong standing on female Malaysian operators (Electronic Industry), Thesis ,  ( )
  • Effect of lot size on cyvle time for semiconductor back-end manufacturing: A Simulation Approach, Thesis ,  ( )
  • Design and Development of a vision guided mobile robot, Thesis ,  ( )
  • A Study on the Performance of an XY Table for Laser Spot Welding., Thesis ,  ( )
  • Jurnal Teknology, University Teknology Malaysia, Journal Reviewer ,  ( )
  • Journal of IEM, Journal Reviewer ,  ( )
  • AEESEAP Regional Symposium 2007, Abstract Evaluator ,  ( )
  • Investigation on MSD and Psychosocial among Industrial Workers in Malaysia, Thesis ,  ( )
  • IEM Journal, Journal Reviewer ,  ( )
  • International Journal HFES, Journal Reviewer ,  ( )
  • A Study on Duopoly manufacturing industries in Malaysia-thesis, Journal Reviewer ,  ( )
  • UPM -Perttanika journal, Journal Reviewer ,  ( )
  • PhD thesis on physiological ergonomics, Thesis ,  ( )
  • International Conference on Ergonomics on 2019 and the paper submitted to the conference will be published with MJPHM Journal. The Special issues was published in November 2020., Article In Journal ,  (2019 - 2020)
  • Pemeriksa Luar Thesis PHD UKM (Darliana Mohamad), Thesis ,  (2018 - 2018)
  • 4th International Conference on Ergonomics and Manufacturing management 2019, 4th International Conference ,  (2018 - 2019)
  • External Examiner - PHD UKM, Thesis ,  (2016 - 2017)
  • External Examiner PHD UTM, Thesis ,  (2016 - 2017)
  • Editor in Chief for special issue in Ergonomics International conference for JESTEC journal (Journal of Science and Technology), Article In Journal ,  (2015 - 2016)
  • Panel Judge, Innovation Expo ,  (2013 - 2013)
  • High Impact Collaboration Research and Supervision, Project ,  (2012 - 2016)

CONTRIBUTION TO SOCIETY
(Contribution To Society), (Level), (Start Date), (End Date).


  • Development of ergonomics chair for lowerlimb impairment, (Local), 05/01/2016 until 31/12/2017
  • Development Of Wudu' (ablution) Workstation For Elderly & Disabled Person, (National), 05/01/2015 until 31/12/2019
  • Developing a flexi chair for elderly , (Community), 01/12/2014 until 01/06/2015
  • developing a prototype for wudu' workstation for disabled and elderly, (Community), 01/06/2014 until 01/12/2014
  • Survey, investigation and developing product and facilities for disabled students in UM. First phase of the survey has been carried out on significant gaps on selected facilities in UM. , (University), 01/03/2013 until 08/12/2004
  • Investigation on Asisstive Learning for disable children, (National), 01/01/2008 until  
  • Developing a conducive workstation for children with cerebral Palsy, (National), 01/06/2005 until  

COMMERCIALISATIONS
(Company Name), (Product Name), (Commercial Type), (Industry).


  • Activa Bisness Pods@UMI, (SUCCI WUDU - Wudu station for person with disabilities and elderly), Bisness Pods Umi, Materials And Advanced Material (polymers, Metals, Composites, Ceramics)

SUPERVISION


POST GRADUATE STUDENT
(Name of Degree), (Name of Candidates), (Title of Thesis), (Academic Session)

Completed
  • Master Degree, Nursyahirah Binti Adnan, INVESTIGATION ON ABLUTION (WUDU') WORKSTATION DESIGN FOR WHEELCHAIR USERS IN MALAYSIA, 2018/2019
  • Doctoral Degree (PhD), Daniel Tang Kuok Ho, Safety Performance Measurement Framework for Offshore Oil and Gas Platforms in Malaysia, 2017/2018
  • Master Degree, Siti Rusyida Binti Rohim, THE RELATIONSHIP BETWEEN NECK MUSCLE STRENGTH AND DURATION OF COMPUTER WORK AMONG WOMEN EMPLOYEES, 2014/2015
  • Doctoral Degree (PhD), Mirta Widia, Investigation on lifting frequency in automotive industry, 2013/2014
  • Doctoral Degree (PhD), Nguyen Huu Tho, Flexible Manufacturing cell Development, 2012/2013
  • Doctoral Degree (PhD), Aliq Zuhdi, LOOP LAYOUT DESIGN USING GENETIC ALGORITHM, 2012/2013
  • Doctoral Degree (PhD), Ihwan Ghazali, Product design attributes in Malaysia and Indonsia, 2012/2013
  • Master Degree, Kaeokan Tipsuk, INVESTIGATION ON MENTAL WORKLOAD IN HIGH AND LOW PRECISION TASK, 2011/2012
  • Doctoral Degree (PhD), Nurhayati Muhd Nur, The relationship between work productivity and work performance of production standard time, 2011/2012
  • Master Degree, Nabilla Sofia Md Kamil, Optimal Sitting for Elderly, 2011/2012
  • Master Degree, Adila Hashim, Work station design for school workshop, 2010/2011
  • Doctoral Degree (PhD), Dhakshyani A/p K.ratnadurai, APPLICATION OF FUSED DEPOSITION MODELS IN DYSPLASTIC HIPS SURGERY, 2010/2011
  • Master Degree, Santhira Segaran A/l Ganesan, EFFECT OF PROLONGED SITTING ON LOW BACK PAIN AMONG SEMICONDUCTOR INDUSTRY OPERATORS, 2010/2011
  • Doctoral Degree (PhD), Nurul Shahida Mohd Shalahim, Ergonomics Work design Model for Elderly, 2010/2011
  • Master Degree, Nurul Izzah Abdul Rahman, Investigation onmental workload using EEG on train drivers, 2010/2011
  • Master Degree, Sharifah Nadya Syed Ahmad, Investigation on environment and Workstation design at Toll Plaza, 2010/2011
  • Master Degree, Norliana Binti Yusof, CAPACITIVE INTERFACING FOR MEMS HUMIDITY AND ACCELEROMETER SENSORS, 2009/2010
  • Doctoral Degree (PhD), Sarkawt Rostam Hassan, An Integrated Approach to Machine Tool selaction, 2009/2010
  • Master Degree, Mohd Hanapi Bin Jusoh, A STUDY ON STUDENTS ANTHROPOMENTRY AND SEATING LAYOUT IN SULTAN AZLAN SHAH POLYTECHNIC COMPUTER LABORATORY, 2009/2010
  • Master Degree, Natasya Marliana Binti Mohmad Najib, HANDLING CHIP CARRIER ERGONOMIC ANALYSIS, DESIGN AND DEVELOPMENT, 2009/2010
  • Master Degree, Lim Kok Hwa, INVESTIGATION ON UPPER ARM MUSCLE ACTIVITY ON PROLONGED REPETITIVE STANDING TASK, 2009/2010
  • Master Degree, Khusna Dwiyanti, Job Design in Manufacturing Industry, 2008/2009
  • Doctoral Degree (PhD), Marjan Mohamad Jafari, E-Manufacturing Management, 2008/2009
  • Master Degree, Sari Julia Sartika, Development of Mathematical Model on Prolonged Standing, 2008/2009
  • Doctoral Degree (PhD), Mohd Azlis Sani Md Jalil, Transportation Ergonomics, 2008/2009
  • Master Degree, Santy, Prolonged Sitting and Muscle Fatigue, 2008/2009
  • Master Degree, Mirta Widia, A Study on handarm vibration effect on physiological factors, 2008/2009
  • Doctoral Degree (PhD), Hartomo Soewardi, Axiomatic design principles in analysing the ergonomics design, 2007/2008
  • Doctoral Degree (PhD), Yap Hwa Jen, Virtual Robotic System in manufacturing, 2007/2008
  • Master Degree, Hasrine Abdullah, Ergonomics Study on Job Design at Electronic Industry, 2007/2008
  • Doctoral Degree (PhD), Ruhaizin Bin Sulaiman, Kitchen Gas StoveTable Top Height From Ergonomic Perspective for Elderly In Malaysia, 2007/2008
  • Master Degree, Nor Anisah Bt Ahmad, Assistive technology and conducive learning workstation, 2007/2008
  • Master Degree, Rozaidah Bt Zainon @ Md Ali, The relation between neck pain and spondylosis among VDU users, 2007/2008
  • Doctoral Degree (PhD), Farzad Tahriri, Modelling and optimization of sequencing in flexsible manufacturing system, 2007/2008
  • Master Degree, Dayang Nurfizawati Bt Abang Abdul Karim, An investigation on Ergonomics Awareness at Oil and Gas Industry, 2007/2008
  • Master Degree, Nordiana Nordin, Mems and Electronic Design, 2007/2008
  • Master Degree, Hamidi Saidin, Noise Measurement and investigation at PLUS highway toll, 2007/2008
  • Master Degree, Chan Wai Hong, Noise Investigation at school environment, 2007/2008
  • Doctoral Degree (PhD), Eida Nadirah Binti Roslin, Industrial Plant Playout, 2007/2008
  • Master Degree, Khusnun Widiyati, Artificial Intelligent and Maintenance Effect in Industry, 2007/2008
  • Doctoral Degree (PhD), Hilmora Raimona Zadry, Quantitative Assessment of Mental and Muscle Fatigue, 2007/2008
  • Master Degree, Lian Dewi Angellia, Material Process in Manufacturing, 2007/2008
  • Master Degree, Kamaruddin Yahaya, A Study on Mental Workload and EEG, 2006/2007
  • Master Degree, Nurhayati Binti Mohd Nur, Workspace envelop and sedentry workers, 2004/2005
  • Master Degree, Siva Raman, Manufcaturing System Control at Electronic Industries, 1996/1997
  • Master Degree, Nor Fariza Binti Nor Ruslan, EFFECTS OF AIR TEMPERATURE AND HUMIDITY ON WORKERS' COMFORT AND HEALTH IN CALL CENTRE DEPARTMENT

Ongoing
  • Doctoral Degree (PhD), Iqra Javed, PRODUCT DESIGN RELATED TO ELDERLY / GENERAL WORKERS TO IMPROVE PRODUCTIVITY AND SAFETY IN INDUSTRIES, 2018/2019
  • Doctoral Degree (PhD), Nurul Izzah Binti Abd Rahman, The Relationship Between Mental Workload and Driving Performance of Ageing Drivers.  , 2018/2019
  • Master Degree, Nor Suliani Binti Abdullah, INVESTIGATION IN EXPENDITURE FOR MANUAL MATERIAL HANDLING TASKS IN USING ADVANCED MANUFACTURING TECHNOLOGY, 2018/2019
  • Doctoral Degree (PhD), Nur Akmal Binti Haniffah, MODEL OPTIMIZATION OF AUTOMOTIVE REAR PASSENGER SEAT, 2017/2018
  • Doctoral Degree (PhD), Nazlin Hani Abdullah, Response rate model on ageing drivers in Malaysia, 2013/2014

Terminated
  • Doctoral Degree (PhD), Wong Jiunn Min, ARTIFICIAL INTELLIGENCE INCORPORATED SCADA SYSTEMS FOR FACTORY AUTOMATION AND MANAGEMENT, 2016/2017
  • Doctoral Degree (PhD), Mohd Ashraf Fauzi, Investigation on vehicle ergonomics and performance, 2014/2015
  • Master Degree, Vivekanandan A/l V Nallathambi, ERGONOMIC EVALUATION OF COMPUTER WORKSTATION DESIGN MISMATCH IN OFFICE ENVIRONMENT
FIRST DEGREE/DIPLOMA/PRE-DEGREE
(Course Title), (Academic Session), (No. of Candidates)

Completed
  • Final Year Project, 2016/2017, 1
  • Final Year Project, 2015/2016, 4
  • Final year thesis, 2014/2015, 4
  • FINAL YEAR THESIS PROJECT, 2013/2014, 3
  • Final year thesis, 2012/2013, 4
  • Final year thesis, 2011/2012, 3
  • Final year thesis, 2009/2010, 3
  • Final year thesis, 2008/2009, 3
  • Final Year Thesis, 2007/2008, 12
  • final year Thesis, 2006/2007, 5
  • Final Year Thesis, 2005/2006, 9

TEACHING
(Course Title), (Academic Session), (No of Student), (No of Contact Hours).


POST GRADUATE
  • INDUSTRIAL ERGONOMICS, 2018/2019(1), 7, 42
  • HUMAN FACTOR AND MANAGEMENT AT WORK PLACE, 2018/2019(2), 9, 21
  • INDUSTRIAL ERGONOMICS, 2017/2018(1), 20, 42
  • ERGONOMICS IN ENGINEERING, 2016/2017(1), 20, 48
  • INDUSTRIAL ERGONOMICS, 2016/2017(1), 17, 48
  • ERGONOMICS IN ENGINEERING AND DESIGN, 2016/2017, 7, 48
  • ERGONOMICS IN MANUFACTURING, 2016/2017(1), 7, 48
  • ERGONOMICS IN MANUFACTURING, 2016/2017(1), 1, 48
  • ERGONOMICS IN MANUFACTURING, 2014/2015, 18, 42
  • ERGONOMICS IN ENGINEERING, 2014/2015(1), 35, 42
  • ERGONOMICS IN ENGINEERING, 2013/2014(1), 45, 42
  • ERGONOMICS IN MANUFACTURING, 2013/2014(1), 15, 42
  • ERGONOMICS IN MANUFACTURING, 2012/2013(1), 18, 42
  • ERGONOMICS IN ENGINEERING, 2012/2013(1), 35, 42
  • ERGONOMICS IN ENGINEERING, 2011/2012(1), 45, 42
  • ERGONOMICS IN MANUFACTURING, 2010/2011(1), 20, 42
  • ERGONOMICS IN ENGINEERING, 2010/2011(1), 45, 42
  • ERGONOMICS IN ENGINEERING, 2009/2010, 50, 42
  • ERGONOMICS IN ENGINEERING, 2008/2009, 55, 42
  • MANUFACTURING AUTOMATION AND CONTROL (MASTER PROGRAM), 2007/2008(1), 12, 27
  • ERGONOMICS IN ENGINEERING (Master Program), 2006/2007(1), 25, 60
  • Ergonomics in Manufacturing (Master Program), 2005/2006(1), 25, 60
FIRST DEGREE
  • BIO-RISK MANAGEMENT FOR BIOMEDICAL SCIENCE, 2018/2019(1), 35, 4
  • FUNDAMENTAL OF ELECTRICAL ENGINEERING, 2018/2019(1), 200, 17
  • MANUFACTURING SYSTEMS DESIGN, 2018/2019(2), 18, 42
  • AUTOMATION AND ROBOTICS, 2017/2018(2), 18, 42
  • THINKING AND COMMUNICATION SKILLS, 2016/2017, 40, 42
  • INTRODUCTION TO ELECTRIC ENGINEERING, 2015/2016(2), 50, 42
  • AUTOMATION AND ROBOTICS, 2015/2016(1), 50, 48
  • INTRODUCTION TO ELECTRIC ENGINEERING, 2015/2016(2), 23, 48
  • AUTOMATION AND ROBOTICS, 2015/2016(1), 50, 48
  • AUTOMATION AND ROBOTICS, 2014/2015(1), 45, 42
  • INTRODUCTION TO MANUFACTURING, 2013/2014(1), 1, 42
  • INDUSTRIAL ERGONOMICS, 2013/2014(2), 42, 42
  • INTRODUCTION TO MANUFACTURING, 2012/2013(1), 45, 42
  • INDUSTRIAL ERGONOMICS, 2012/2013(2), 40, 42
  • INDUSTRIAL ERGONOMICS, 2011/2012, 45, 42
  • INDUSTRIAL ERGONOMICS, 2010/2011(2), 35, 42
  • INDUSTRIAL ERGONOMICS, 2009/2010, 40, 42
  • INDUSTRIAL ERGONOMICS, 2008/2009, 40, 42
  • COMPUTER AIDED ERGONOMICS, 2007/2008(1), 64, 60
  • INDUSTRIAL ERGONOMICS, 2007/2008(2), 49, 60
  • THINKING AND COMMUNICATION SKILLS, 2007/2008(2), 18, 42
  • INDUSTRIAL ERGONOMICS, 2006/2007(1), 48, 60
  • ELECTRONICS, 2006/2007(2), 100, 26
  • ELECTRONIC, 2006/2007(1), 100, 26
  • CONCURRENT ENGINEERING, 2005/2006(1), 49, 60
  • INDUSTRIAL ERGONOMICS, 2005/2006(2), 45, 60
  • ELECTRONIC, 2005/2006(1), 113, 26
  • Crtical Thingking and Communication, 2005/2006(2), 20, 43