Curriculum Vitae

ASSOCIATE PROF. DR. ROSLINA BINTI AHMAD

Associate Professor
  • Department of Mechanical Engineering
    Faculty of Engineering
  • +603-79674497

AREAS OF EXPERTISE

  • BIO-COMPATIBLE MATERIALS
    Biomaterials
  • COMPOSITE MATERIALS
    metal matrix composite (MMC), Polymers
  • METALS AND METAL ALLOY MATERIALS
    Rapid solidification

ACADEMIC QUALIFICATION

  • PhD (Leeds)(2010), (Sebatian Antara Logam)
    Leeds University, Leeds, UK
  • MSC(USM) (1998), (Material Engineering)
    Universiti Sains Malaysia (Usm)
  • BSC(HONS)(USM) (1997), (Material)
    Universiti Sains Malaysia (Usm)

ADMINISTRATIVE DUTIES

  • PENYELARAS OBE SOFTWARE BAGI SUBJEK FAKULTI
    02 Jan 2020 - 31 Dec 2022 (Faculty)
  • PENYELARAS PROGRAM DOKTOR FALSAFAH (SECARA PENYELIDIKAN) , FAKULTI KEJURUTERAAN
    09 Oct 2020 - 07 Oct 2022 (Faculty)
  • Head of Unit
    01 Sep 2020 - 31 Aug 2022 (Department of Mechanical Engineering, Faculty of Engineering)
  • Inter-Institutional Committee Aun-SEED-net
    01 Aug 2020 - 31 Dec 2021 (Department of Mechanical Engineering, Faculty of Engineering)
  • Specialization Coordinator
    01 Jan 2020 - 31 Dec 2021 (Department of Mechanical Engineering, Faculty of Engineering)
  • Academic advisor
    20 Jul 2017 - 19 Jul 2021 (Department of Mechanical Engineering, Faculty of Engineering)
  • Academic Advisor
    20 Jul 2016 - 19 Jul 2020 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Members
    05 May 2015 - 17 Jan 2020 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee member
    30 May 2017 - 30 Apr 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee member
    11 Sep 2017 - 14 Jan 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Academic Advisor
    01 Nov 2016 - 31 Dec 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Technical Committee Member
    02 Jan 2017 - 29 Dec 2017 (University Malaya)
  • Supervisor
    07 Jul 2017 - 29 Sep 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee member
    16 Feb 2017 - 23 Jun 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Members
    11 Sep 2014 - 31 Dec 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Chairman
    21 Apr 2016 - 30 Nov 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Mamber of the organizing committee of International Conference on Advances in Materials and Processing Technologies
    08 Aug 2016 - 11 Nov 2016 (International)
  • Koordinator AUB/SEED-Net: Materials Engineering
    20 Oct 2014 - 20 Oct 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Ahli Jawatankuasa Semakan Kurikulum and Penambahbaikan Program Ijazah Sarjana Kejuruteraan (Bahan & Teknologi)
    10 Nov 2014 - 31 Dec 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Members
    30 Oct 2014 - 31 Dec 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Ahli Jawatan kuasa Unit Kualiti Peringkat Jabatan Kejuruteraan Mekanik, Fakulti Kejuruteraan
    09 Oct 2014 - 31 Dec 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Members
    10 Apr 2012 - 31 Dec 2014 (University Malaya)
  • Acting Head of Department
    09 Dec 2014 - 10 Dec 2014 (Department of Mechanical Engineering, Faculty of Engineering)
  • Acting Head of Department
    08 Dec 2014 - 08 Dec 2014 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Members
    18 Sep 2013 - 26 Dec 2013 (Department of Mechanical Engineering, Faculty of Engineering)
  • INDUSTRIAL TRAINING SUPERVISOR FOR ACADEMIC 2012/2013 SESSION
    01 Aug 2013 - 16 Sep 2013 (Department of Mechanical Engineering, Faculty of Engineering)
  • Ahli Jawankuasa Pelaksana Kursus Asas Pembudayaan Keusahawanan (APK)
    01 Sep 2011 - 31 Aug 2013 (University Malaya)
  • Ketua Program Sarjana Kejuruteraan (Bahan dan Teknologi)
    01 Jul 2012 - 30 Jun 2013 (Department of Mechanical Engineering, Faculty of Engineering)
  • Ahli Jawatankuasa penyaringan (moderation) kertas soalan
    19 Apr 2012 - 29 Mar 2013 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Members
    23 Jul 2012 - 31 Jan 2013 (University Malaya)
  • Committee Members
    01 Oct 2010 - 31 Dec 2012 (National)
  • Ketua Program Sarjana Kejuruteraan (Bahan dan Teknologi)
    01 Jul 2011 - 29 Jun 2012 (Department of Mechanical Engineering, Faculty of Engineering)
  • AJK harga dan teknikal bagi pembelian inductively coupled plasma spectroscopy (ICP) untuk jabatan kejuruteraan awan, UM
    06 Jun 2012 - 06 Jun 2012 (Department of Mechanical Engineering, Faculty of Engineering)
  • AJK harga dan teknikal bagi pembelian total organic carbon (TOC) analyzer untuk jabatan kejuruteraan awam, UM
    06 Jun 2012 - 06 Jun 2012 (Department of Mechanical Engineering, Faculty of Engineering)
  • AJK harga dan teknikal bagi pembelian gravimetri analyzer (TGA/DSC)muntuk jabatan kejuruteraan awam
    06 Jun 2012 - 06 Jun 2012 (Department of Mechanical Engineering, Faculty of Engineering)
  • Jawatan kuasa penilai spesifikasi dan teknikal bagi membekal, menghantar, memasang, menguji dan mentauliah satu unit XPS spectometer software and extensive range of accessories di Fakulti kejuruteraan
    28 Feb 2012 - 28 Feb 2012 (Department of Mechanical Engineering, Faculty of Engineering)
  • Acting Head of Department
    27 Feb 2012 - 27 Feb 2012 (Department of Mechanical Engineering, Faculty of Engineering)
  • Ahli Jawatankuasa penilai harga bagi pembelian peralatan spektroskopi mikroraman
    21 Feb 2012 - 21 Feb 2012 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Members
    14 Mar 2011 - 31 Dec 2011 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Members
    23 Mar 2011 - 31 Dec 2011 (Department of Mechanical Engineering, Faculty of Engineering)
  • Jawatan kuasa penilai harga bagi pembelian peralatan fatigue testing machine for soft materials equipped with non-contect vedio extenso-meter
    19 Dec 2011 - 19 Dec 2011 (Department of Mechanical Engineering, Faculty of Engineering)
  • Penyelaras Program Sarjana Kejuruteraan (Kejuruteraan Bahan Dan Teknologi)
    21 Jan 2011 - 30 Jun 2011 (Department of Mechanical Engineering, Faculty of Engineering)
  • Ahli Jawatankuasa Pemilihan Kemasukan sesi 2010/2011
    15 Dec 2009 - 31 Dec 2010 (Department of Mechanical Engineering, Faculty of Engineering)
  • Ahli Jawatankuasa Pengajian Mahasiswa Peringkat Jabatan
    03 Aug 2009 - 02 Aug 2010 (Department of Mechanical Engineering, Faculty of Engineering)
  • Acting Head of Department
    08 Jun 2010 - 10 Jun 2010 (Department of Mechanical Engineering, Faculty of Engineering)
  • Ahli Jawatan kuasa Pemilihan Kemasukan bagi program ijazah srjana muda kejuruteraan di Fakulti Kejuruteraan sesi 2009/2010
    29 Jan 2009 - 29 Apr 2010 (University Malaya)
  • Wakil Jabatan Kejuruteraan Mekanik Ke Jawatankuasa Keselamatan dan Kesihatan Pekerja
    31 Mar 2008 - 20 Apr 2010 (Department of Mechanical Engineering, Faculty of Engineering)
  • Acting Head of Department
    17 Dec 2009 - 17 Dec 2009 (Department of Mechanical Engineering, Faculty of Engineering)
  • Pemeriksa Luar Peperiksaan Perkhidmatan bagi Tujuan Pengesahan Dalam Jawatan
    09 Dec 2009 - 14 Dec 2009 (Department of Mechanical Engineering, Faculty of Engineering)

MEMBERSHIPS

  • INSTITUTE OF MECHANICAL ENGINEERS, CHARTERED ENGINEER
    Since 2017 (International)

AWARD AND STEWARDSHIP

  • Judge in BEGIN Challenge
    University Malaya, 2017 (Community)
  • Recognized Reviewer Status
    Elsevier- Chemosphere., 2016 (International)
  • Recognized Reviewer Status
    Elsevier- Science of the Total Environment, 2016 (International)
  • Certificate of Teaching Excellence
    University of Malaya, 2014 (Department)
  • EXCELLENCE SERVICE AWARD
    University of Malaya, 2011 (University)

PUBLICATIONS

Article in Journal
WoS
  1. Akram, Naveed; Hosseini, Maryam; Sadri, Rad; Kazi, S. N.; Kasaeian, Alibakhsh; Yarmand, Hooman; Hooman, Kamel; Ahmad, Roslina (2022). A facile, green fabrication of aqueous nanofluids containing hydrophilic functionalized carbon nanotubes toward improving heat transfer in a closed horizontal flow passage, POWDER TECHNOLOGY. 404. doi:10.1016/j.powtec.2022.117451
  2. Odesanya, Kazeem Olabisi; Ahmad, Roslina; Andriyana, Andri; Bingol, Sedat; Cetinkaya, Ridvan; Wong, Yew Hoong (2022). Thermal characterization and stress analysis of Ho2O3 thin film on 4H-SiC substrate, MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING. 152. doi:10.1016/j.mssp.2022.107110
  3. Odesanya, Kazeem Olabisi; Ahmad, Roslina; Andriyana, Andri; Bingol, Sedat; Wong, Yew Hoong (2022). Review-Gate Oxide Thin Films Based on Silicon Carbide, ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY. 11(8). doi:10.1149/2162-8777/ac84ff
  4. Odesanya, Kazeem Olabisi; Ahmad, Roslina; Andriyana, Andri; Ramesh, S.; Tan, Chou Yong; Wong, Yew Hoong (2022). Effects of O-2 and N-2 Gas Concentration on the Formation of Ho2O3 Gate Oxide on 4H-SiC Substrate, SILICON. . doi:10.1007/s12633-022-02040-8
  5. Odesanya, Kazeem Olabisi; Ahmad, Roslina; Andriyana, Andri; Wong, Yew Hoong (2022). Effects of Oxidation Duration on the Structural and Electrical Characteristics of Ho2O3 Gate Oxide on 4H-SiC Substrate, JOURNAL OF ELECTRONIC MATERIALS. . doi:10.1007/s11664-022-09686-5
  6. Odesanya, Kazeem Olabisi; Onik, Tahsin Ahmed Mozaffor; Ahmad, Roslina; Andriyana, Andri; Ramesh, S.; Tan, Chou Yong; Wong, Yew Hoong (2022). Physical and electrical characteristics of Ho2O3 thin film based on 4H-SiC wide bandgap semiconductor, THIN SOLID FILMS. 741. doi:10.1016/j.tsf.2021.138997
  7. Odesanya, K. O., Ahmad, R., Jawaid, M., Bingol, S., Adebayo, G. O., & Wong, Y. H. (2021). Natural Fibre-Reinforced Composite for Ballistic Applications: A Review. Journal of Polymers and the Environment, 29(12), 3795-3812. doi: 10.1007/s10924-021-02169-4
  8. Sadri, R., Hosseini, M., Kazi, S. N., Bagheri, S., Abdelrazek, A. H., Ahmadi, G., . . . Abidin, N. I. Z. (2018). A facile, bio-based, novel approach for synthesis of covalently functionalized graphene nanoplatelet nano-coolants toward improved thermo-physical and heat transfer properties. Journal of Colloid and Interface Science, 509, 140-152. doi:10.1016/j.jcis.2017.07.052
Others
  1. K H Tan, H A Tajuddin, R A Ahmad, A Suhaimy, M R Johan , Fabrication of Nanocomposite gold polymer Metamaterials with tunable optical properties, Optik
  2. Rad Sadri, M Hosseini, K S Newas, S Bagheri, G Ahmadi, Ali H A, N Zubir, R Ahmad, N I Abidin (2018). A facile, bio-based, novel approach for synthesis of covalently functionalized graphene nanoplatelet nano-coolants toward improved thermo-physical and heat transfer properties, Journal of Colloid and Interface Science, Vol 509, 140-152
  3. Ai Wen Tan, Ling Ling Liau, Kien Hui Chua, Roslina Ahmad, Sheikh Ali Akbar & Belinda Pingguan-Murphy (2016). Enhanced in vitro angiogenic behaviour of human umbilical vein endothelial cells on thermally oxidized TiO2 nanofibrous surfaces Sci. Rep., 6, p. 21828
  4. Aminuddin, N.I., Ahmad, R., Ansari, H.M., Mohd. Zain, N., Akbar, S.A., Pingguan-Murphy, B. Human fetal osteoblast cell response to self-assembled nanostructures on YSZ-(110) single crystal substrates (2016) Materials and Design, 94, pp. 274-279.
  5. Nur Izzati Aminuddin, Roslina Ahmad, Sheikh Ali Akbar & Belinda Pingguan- Murphy (2016) Osteoblast and stem cell response to nanoscale topographies: a review, Science and Technology of Advanced Materials, 17:1, 698-714,
  6. A. W. Tan, B. Pingguan-Murphy, R. Ahmad, S. Akbar, "Evaluation of Surface Properties and In Vitro Characterization of Surface Modified In Situ TiO2 Nanofibers", Key Engineering Materials, Vols. 656-657, pp. 63-67, Jul. 2015
  7. N Charde , R Ahmad, N I Zainal Abidin. Interpreting the weld formations using acoustic emission for the carbon steels and stainless steels welds in servo- based resistance spot welding, Int J Adv Manuf Technol, pp 1-8, 2015
  8. AW Tan, B Pingguan-Murphy, R Ahmad, S Akbar.Synthesis of bioactive titania nanofibrous structures via oxidation.Materials Research Innovations. Vol. 8, issue S6. S6-220-S6-223.
  9. AW Tan, B Pingguan-Murphy, Roslina Ahmad, Sheikh Akbar.2014. Surface Properties and Cell Response of Bioactive Thermally Grown TiO2 Nanofibers.Applied Mechanics and Materials.vol 575.219-222
  10. AW Tan, R Ismail, KH Chua, R Ahmad, SA Akbar, B Pingguan-Murphy. 2014.Osteogenic potential of in situ TiO 2 nanowire surfaces formed by thermal oxidation of titanium alloy substrate,Applied Surface Science,320 :161-170
  11. Tan AW, Tay L, Chua KH, Ahmad R, Ali Akbar S, Pingguan-Murphy B,2014,Proliferation and stemness preservation of human adipose-derived stem cells by surface-modified in situ TiO2 nanofibrous surfaces,Int J Nanomedicine.vol.2014/9(1): 5389-5401.
  12. Tan, A. W., Dalilottojari, A., Pingguan-Murphy, B., Ahmad, R., Akbar, S. 2014. In vitro chondrocyte interactions with TiO2 nanofibers grown on Ti-6Al-4V substrate by oxidation Ceramics International
  13. A.W. Tan , B. Pingguan-Murphy , R. Ahmad , S.A. Akbar. (2013). Advances in fabrication of TiO2 nanofiber/nanowire arrays towards the cellular response in biomedical implantations: a review.J Mater Sci, DOI 10.1007/s10853-013-7659-0 (ISI-Cited Publication)
  14. Ch'ng, S.Y., Andriyana, A., Verron, E., Kahbasi, O., Ahmad, R. (2013). Development of a novel experimental device to investigate swelling of elastomers in biodiesel undergoing multiaxial large deformation. Experimental Mechanics. 53, 1323-1332. (Q1) (ISI/SCOPUS Cited Publication)
  15. K.H. Tan, R. Ahmad, M.R. Johan. 2013.Electromagnetic and microwave absorbing properties of amorphous carbon nanotube cadmium selenide quantum dot hybrids.Mater. Chem. Phy., 139, p. 66
  16. A.W. Tan, B. Pingguan-Murphy, R. Ahmad & S.A. Akbar. 2012. Review of Titania Nanotubes: Fabrication and CellularResponse.Ceramics International. 38(6):4421-4435
  17. Ahmad, R., Cochrane, R. F., Mullis, A. M. 2012. The formation of regular alpha Ni-gamma(Ni31Si12) eutectic structures from undercooled Ni-25 at.% Si melts Intermetallics. (Tier 1, Impact Factor = 1.649)
  18. K H Tan, R Ahmad, B F Leo, M C Yew, B C Ang, M R Johan, Physico-chemical studies of amorphous carbon nanotubes synthesized at low temperature, Materials Research Bulletin, 47 (2012) 1849-1854
  19. R. Ahmad, R. F. Cochrane and A. M. Mullis,2012.Disorder trapping during the solidification of Ni3Ge from its deeply undercooled melt.Journal of Materials Science, Vol 47, No 5,2411- 2420
  20. S F Tay, M R Johan, R Ahmad, Synthesis and characterization of Gold-Titanium-Mesoporous Silica nanomaterials, Int J Electrochem Sci 7(2012)4716-4726
  21. S Ibrahim, M R Johan, Thermolysis and conductivity studies of Poly(Ethylene Oxide)PEO based polymer electrolytes doped with carbon nanotube, Int J Electrochem Sci, 7(2012)2596-2615
  22. S Ibrahim, R Ahmad, M R Johan, Conductivity and optical studies of plasticized solid polymer electrolytes doped with carbon nanotubes, Journal of Luminescence 132 (2012)147 - 152
  23. S Ibrahim, S M M Yasin, R Ahmad, M R Johan, Conductivity, thermal and morphology studies of PEO based salted polymer electrolytes, Solid State Sciences 14(2012)1111-1116
  24. Singho, N. D., Lah, N. A. C., Johan, M. R., Ahmad, R. 2012. FTIR Studies on Silver-Poly(Methylmethacrylate) Nanocomposites via In-Situ Polymerization Technique International Journal of Electrochemical Science. (Tier 2, Impact Factor = 3.729)
  25. Suriani Ibrahim, Siti Mariah Mohd Yassin, Ng Meng Nee, Roslina Ahmad, Mohd Rafie Johan, Conductivity and dielectric behaviour of PEO based solid nanocomposite polymer electrolytes, (2012)Solid State Communications
  26. Suriani Ibrahim, Siti Mariah Mohd Yassin, Ng Meng Nee, Roslina Ahmad, Mohd Rafie Johan. Conductivity, thermal and infrared studies on plasticized polymer electrolytes with carbon nanotubes as filler. Journal of Non-Crystalline Solids (2012)358 210-216
  27. Tan KH, Johan MR, Ahmad R, Kadri NA, Mohd. Zain N, Arof AK. Mechanical analysis of the effects of different mechanical alloying periods on Ni3Al intermetallic compound fabrication quality. International Journal of Electrochemical Science. 2012;7(4):3765-3772 (Q2, JCR 2010)
  28. R.Ahmad, R.F.Cochrane,A.M. Mullis,2011. The formation of regular Ni-(Ni31Si12) eutectic structures from undercooled Ni-25 at.% Si melts, Intermetallics,Vol 22, Pages 55 61
  29. S Ibrahim, M M Yassin, R Ahmad, M R Johan.2011.Effects of various LiPF6 salt concentrations on PEO-based solid polymer electrolytes.Ionics.
  30. S Ibrahim, M R Johan, Conductivity, thermal and neural network model nanocomposite solid polymer electrolyte system (PEO - LiPF6 - EC - CNT), Int. J. Electrochem. Sci. 6 (2011)5565-5587
  31. S Ibrahim, S M M Yassin, M N Ng, R Ahmad, M R Johan, Impedance spectroscopy of carbon nanotube/solid polymer electrolyte composites, Solid state Communications (2011)
  32. T K Han, L B Fen, N M Nee, R Ahmad,M R Johan. 2011.Optical Studies on Multiwalled Carbon Nanotubes Via Modified Wolff-Kishner Reduction Process.Adv Mater Res.194-196:618-624
  33. T K Han, R Ahmad, M R Johan, "Phase, thermal and impedance studies of nanosize Li2WO4 via mechanical milling and sintering", Superlattices and microstructures 49(2011)17 - 31
Chapter in Books
  1. NI Zainal Abidin, MF Mohd Sabri, K Kalantari, AM Afifi, & R Ahmad, (2019). Corrosion detection for natural/synthetic/textiles fiber polymer composites. Structural Health Monitoring of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites, 93 112. doi:10.1016/b978-0-08-102291-7.00006-x (2019)
Article in Proceeding
  1. Eleanor Merson, Roslina Ahmad, Dr. R. F. Cochrane, Dr. A.M. Mullis, EBSD of Ni3Ge Solidified from Highly Undercooled Melts, Electron Back Scatter Diffraction Meeting, 26 - 28 March 2007
  2. A.K. Masrom, R. Ahmad, N. M Diah, M. Mustapha, B. Meh, C. C Ho, "Densification and Microstructural Characteristics of Mechanically Alloyed Ni-Al powder", Proceeding of National Seminar on Advance Materials Development in Malaysia, May 2001, Johor.

RESEARCH INTEREST

  • rapid solidification of intermetallic alloys by melt fluxing (rapid solidification, containerless processing, melt fluxing)
  • Mechanical Alloying of aluminum nano-composite with intermetallic and ceramics reinforcement (Mechanical alloying, intermetallic)
  • Diffusion of biodiesel in polymer materials (diffusion, polymers)

RESEARCH PROJECT

National
  1. 2023 - 2025, RU Geran - Fakulti Program
    Characterisation of Tinatinum Zirconia Alloy Manufactured using Powder Metallurgy (PM) as Load Bearing Bone Implants ( Co-Researcher)
  2. 2022 - 2024, UM International Collaboration Grant
    1. Nanodiamond based screen-printed electrode for fluoroquinolone antibiotic detection 2. Low-dimensional materials for optoelectronic and photovoltaic applications ( Co-Researcher)
  3. 2020 - 2023, RU Geran - Fakulti Program
    Surface Degradation Characterization Of Fluoride Added Oxide Ceramics ( Principal Investigator(PI))
  4. 2020 - 2023, Fundamental Research Grant Scheme (FRGS)
    Exploring The Potential Of Surface Modification Of Zn/zn Alloys By Nanostructure Growth And Its Degradation Mechanism ( Principal Investigator(PI))
  5. 2018 - 2021, RU Geran - Fakulti Program
    The Corrosion Study Of Mg Alloys With The Influenced Of Protein, Amino Acids And Glucose In Buffered Hank?s Solution At 37 ?c For Biomedical Applications ( Co-Researcher)
  6. 2015 - 2019, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC))
    Corrosion Behavior Of Nano-textured Surface And Effect On Spectrally Selective Solar Absorber Performance ( Co-Researcher)
  7. 2016 - 2019, Fundamental Research Grant Scheme (FRGS)
    Development Of New Magnesium-niobium Alloy And Its Corrosion Mechanism Study As Biomadical Materials ( Principal Investigator(PI))
  8. 2016 - 2019, Bantuan Kecil Penyelidikan (BKP)
    Construction of electrochemical enzymatic biosensor for biomedical application. ( Co-Researcher)
  9. 2015 - 2018, Geran Penyelidikan Universiti Malaya (UMRG Programme) - SBS (Equitable Society)
    Development Of Wudu' (ablution) Workstation For Elderly & Disabled Person ( Co-Researcher)
  10. 2016 - 2018, Postgraduate Research Grant (PPP) - Research
    Wear and corrosion study of Magnesium based alloys Metal Matrix Composites (MMCs) with addition of Graphene Nanoplatelets (GNPs) ( Principal Investigator(PI))
  11. 2014 - 2017, Fundamental Research Grant Scheme (FRGS)
    Fundamental Investigation Of High Efficiency Biopolymer Based Thermoelectric Materials As Waste Heat Energy Harvester. ( Co-Researcher)
  12. 2014 - 2016, Geran Penyelidikan Universiti Malaya (UMRG) - AFR (Frontier Science)
    Effect Of Single/duplex Stage Heat Treatment And Thermal Oxidation On The Microstructure And Properties Of Ti6al4v Alloy ( Principal Investigator(PI))
  13. 2014 - 2016, Geran Penyelidikan Universiti Malaya (UMRG) - AFR (Frontier Science)
    The Effect Of Magnetic-field Towards Tendon Derived Stem Cells. ( Co-Researcher)
  14. 2009 - 2011, Postgraduate Research Grant (PPP) - Research
    CHARACTERIZATION AND REAACTION BEHAVIOR OF STERICALLY HINDERED SULFUR COMPOUNDS IN HEAVY CRUDES WITH NANOSIZED ZINC-ALUMINA COMPLEX ( Main Supervisor)
  15. 2010 - 2011, Postgraduate Research Grant (PPP) - Research
    SYNTHESIS OF MULTI-WALLED CARBON NANOTUBES THROUGH A MODIFIED WOLFF-KISHNER REDUCTION PROCESS AND THEIR CHARACTERIZATION STUDIES ( Main Supervisor)
  16. 2011 - 2013, Exploratory Research Grant Scheme (ERGS)
    EXPLORING POTENTIAL FORMS OF SURFACE MODIFICATION OF TITANIUM FOR THE ORTHOPAEDIC SECTOR 18/07/11 End Date 17/07/13 ( Principal Investigator(PI))
  17. 2009 - 2011, Geran Penyelidikan Universiti Malaya (UMRG)
    Development of high strength aluminium nano- composite with hybrid reinforcement of intermetallic and ceramics by powder processing technique. ( Principal Investigator(PI))
  18. 2008 - 2010, Short Term Research Fund (Vote F)(PJP)
    Synthesis and characterization of intermetallic by mechanical alloying process ( Principal Investigator(PI))
International
  1. 2016 - 2018, International Funding
    Strenghthening Mechanism and Biocompatibility of Magnesium based Alloys Composite with Graphene Nanoplatelets (GNPs) Reinforcement ( Principal Investigator(PI))

PAPER PRESENTED

EVENT ORGANISER
  1. none, International conference on the science & engineering of materials (ICoSEM 2015) (16 Nov 2015 - 18 Nov 2015)
  2. SELF-ASSEMBLED NANOSTRUCTURES ON YSZ SUBSTRATE AND HUMAN FETAL OSTEOBLASTS CELL TESTS, The AUN/SEED-Net Regional Conference on Materials Engineering 2014 (RCME 2014) (11 Dec 2014 - 12 Dec 2014)
  3. OSTEOBLAST RESPONSES TO THERMAL OXIDIZED TIO2 NANOFIBROUS SURFACES, The AUN/SEED-Net Regional Conference on Materials Engineering 2014 (RCME 2014) (11 Nov 2014 - 12 Nov 2014)
ORAL PRESENTER
  1. Thermal Stability of the Al-Ni Mechanically Alloyed Powders and the Phase Transformation During Heating, 8th annual international conference on composites engineering (05 Aug 2001 - 11 Aug 2001)
PRESENTER
  1. Densification and Microstructural Characteristics of Mechanically Alloyed Ni-Al powder, Persidangan Serantau Sains dan teknologi Keadaan Pepejal Ke XVIII (07 Sep 2001 - 09 Sep 2001)
  2. Structural Evolution and Phase Formation During Mechanically Alloying of Ni-Al, Persidangan Serantau Sains dan teknologi Keadaan Pepejal Ke XVIII (07 Sep 2001 - 09 Sep 2001)
  3. Aluminide Intermetallics produced by spontaneous reaction during mechanical alloying, Persidangan Serantau Sains dan teknologi Keadaan Pepejal Ke XVIII (07 Sep 2001 - 09 Sep 2001)
  4. Hotpress reaction synthesis for the production of aluminide intermetallic from its elemental powder, Persidangan Serantau Sains dan teknologi Keadaan Pepejal Ke XVIII (07 Sep 2001 - 09 Sep 2001)

ACADEMIC/PROF. SERVICES

Evaluation
  1. (2023) Friction Stir Spot Welding of Copper to Aa6061 With Graphene Additives, University, (Internal Examiner)
  2. (2023) Development and Characterization of Superamphiphobic Pvdf-Fnal203 Coating for Anti -Corrosion Application, University, (Internal Examiner)
  3. (2022) Microstructure and Mechanical Properties of Sn-Bi-Co Low Temperature Solder Alloy, University, (Internal Examiner)
  4. (2021) Elevated Temperature Deformation Mechanism of Boronised Duplex Stainless Steel (Dss) and Its Application S Potential, University, (Internal Examiner)
  5. (2021) Effect of Sintering Additives On The Densification and Mechanical Properties of Alumina Toughened Zirconia Ceramic Composite, University, (Internal Examiner)
  6. (2019) EFFECT OF 1-BUTYL-3-METHYLIMIDAZOLIUM CHLORIDE ON CELLULOSE AND KERATIN AS REINFORCEMENTS IN POLY (LACTIC ACID) COMPOSITE FILMS , (Internal Examiner)
  7. (2019) SYNTHESIS AND CHARACTERIZATION OF MULTIWALLED CARBON NANOTUBES-SILVER NANOPARTICLES REINFORCED POLYVINYL ALCOHOL NANOCOMPOSITES (PVA/MWNT-AgNP) AS HIGH PERMITTIVITY MATERIALS, (Internal Examiner)
  8. (2019) ICOSEM PAPERS REVIEW FOR PUBLICATION, (Reviewer)
  9. (2019) FABRICATION OF SPECTRALLY SELECTIVE SOLAR POWER ABSORBER MATERIAL VIA POWDER METALLURGY PROCESS , (Internal Examiner)
  10. (2018) Effect of 1-Butyl-3-Methylimidazolium Chloride on Cellulose and Keratin as Reinforcement in Poly (Lactic Acid) Composite Film , (Internal Examiner)
  11. (2016) Nur Ayuni Jamal (PhD) : Fabricatioan and performance of low to medium porosity closed-cell porous Aluminum via powder metallurgy technique, (Internal Examiner)
  12. (2015) Hairul Effendy Ab Maulod (MEng) Constitutive modeling of softening in swollen elastomers under long term cyclic loading, (Internal Examiner)
  13. (2015) Mohd Arzaimiruddin bin Ariffin (MEng) Swelling of Elatomers in biodiesel in the absence and in the presence of mechanical loading, (Internal Examiner)
  14. (2015) Nurafiqah bt Rosman (MSc) Study on the effect of zeolite rice husk paticles on polysulfone membrane, (External Examiner)
  15. (2015) Tharsika Thabothanayakam (PhD) Synthesis and characterization of zinc oxide and tin oxide based nanostructures for gas sensing applications , (Internal Examiner)
  16. (2014) Mohd Shahadan bin Mohd Suan (PhD) Synthesis and characterization of Al2O3 nanoparticles ADDED yba2cu3o7- SUPERCONDUCTOR VIA CITRATE-NITRATE Auto-combustion reaction , (Internal Examiner)
  17. (2014) Nurul Suhaira bt Abdullah (MEng) Mechanical and electrical properties of natural rubber reinforced by carbon nanotubes, (Internal Examiner)
  18. (2014) Robi Shankar Datta (MSc) polymer scaffolded ionic liquid membranes for thermoelectric and energy applications, (Internal Examiner)
  19. (2014) Sunita Bt Harun (MSc) Development of citting tool through superplastic boronizing of duplex stainless steel, (Internal Examiner)
  20. (2014) Haris bin Akram (MSc) A study on hydroxyapatite concentration in fibrous scaffolds and its effect on rat bone marrow stem cell proliferation, (Internal Examiner)
  21. (2013) Ng Meng Nee (MSc) Synthesis and characterizations of amorphous carbon nanotubes/silver nanoparticles hybrid materials. , (Internal Examiner)
  22. (2012) Tan Say Min (MSc) Synthesis and characterization of PEO-PMMA-LiClO4-EC-MnO nanocomposite polymer electrolytes, (Internal Examiner)
  23. (2012) Hakimeh Wakily (MSc) Colloidal filtration of alumina-zirconia with solid oxide additives, (Internal Examiner)
  24. (2012) Azida Azni (MEng) Preparation and charecterization of copper matrix reinforced with copper-coated silicon composite for electronic packaging, (Internal Examiner)
  25. (2012) Subashini A?P Supramaniam (MSc) Synthesis and characterization of manganese (IV)oxide nanowire via hydrothermal method , (Internal Examiner)
  26. (2012) Mohammed Mahbubul Islam (MSc) Investigation of fundamental properties of nanorefrigerants, (Internal Examiner)
  27. (2011) Tay See Leng (MSc)Effects of nickel and cobalt nanoparticle Additions to sn-ag-cu solder , (Internal Examiner)
  28. (2011) Nurulhawa Ali @Hasim (MSc)Synthesis and Characterization Studies of Y1-xAgxBa2Cu3O7- Composite Via Conventional Solid State reaction , (Internal Examiner)
  29. (2011) Aemi Nadia Binti Ahmad Sauffi (MSc)The effects of copper nanoparticle addition into Sn-3.5Ag solder , (Internal Examiner)
  30. (2011) Esmaeil Askari (MEng) Synthesis of alumina-silicon carbide-zirconia functionally graded material by electrophoretic deposition , (Internal Examiner)
  31. (2011) Yong Siu Fung (MEng) Superplastic Boronizing on Duplex Stainless Steel (DSS) using Compression Method , (Internal Examiner)
  32. (2011) Siti Mariah Binti Mohd Yasin (MSc) Synthesis and Development of novel PEO-LiCF2SO3-DBP-ZrO2 Nanocomposite polymer electrolytes , (Internal Examiner)
  33. (2009) SALAH M. ALI ALOBAYDI (MEng) EXPERIMENTAL STUDY OF COMPOSITE CYLINDERS UNDER INTERNAL PRESSURE LOADING , (Internal Examiner)
  34. Tan Meow Min (MEng) Microwave Hybrid Sintering Of Tin-Based Alloy , (Internal Examiner)
Contribution to external organisation
  1. (2009) Pembangunan Standard Malaysia: MS2283:2009 METALLIC MATERIALS- FATIQUE TESTING- AXIAL FORCE-CONTROLED METHOD, SIRIM BERHAD

SUPERVISION

Postgraduate Student
PhD/ Doctoral
  1. (2023) silicon based metal oxide for acetone GAS DETECTION, NURLIYANA ABU HASAN SAZALLI
  2. (2023) FABRICATION AND CHARACTERIZATION OF IN SITU TITANIA (TIO2) NANOSTRUCTURES VIA THERMAL OXIDATION FOR BIOMEDICAL APPLICATIONS, NORITA BINTI MOHD ZAIN
  3. (2021) DEVELOPMENT OF HOLMIUM OXIDE THIN FILM AS HIGH-K GATE DIELECTRIC BASED ON SILICON CARBIDE SUBSTRATE, ODESANYA KAZEEM OLABISI
  4. (2020) INVESTIGATION OF THE INFLUENCE OF SELF-ASSEMBLED NANOBARS ON CELLULAR RESPONSE IN VITRO, NUR IZZATI BINTI AMINUDDIN
  5. (2015) FABRICATION AND CHARACTERIZATION OF IN SITU TITANIA (TIO2) NANOSTRUCTURES VIA THERMAL OXIDATION FOR BIOMEDICAL APPLICATIONS, NORITA BINTI MOHD ZAIN
  6. (2014) Surface modification of titanium and its alloys in orthopedic applications, TAN AI WEN
  7. (2013) NANOPATTERNING ON SUBSTRATES USING POWDER SUSPENSION METHOD, NUR IZZATI BINTI AMINUDDIN
  8. (2011) Surface modification of titanium and its alloys in orthopedic applications, TAN AI WEN
  9. (2010) Coupling between diffusion of biodiesel and large deformation in elastomers: from experimental investigation to constitutive modeling, CH'NG SHIAU YING
Master
  1. (2023) Characterisation aluminium toughened zirconia (ATZ) doped with sintering additives for medical implantation applications., KALASHINEY JAYAKUMARAN
  2. (2022) CORROSION BEHAVIOUR OF MAGNESIUM ALLOYS IN HANK'S SOLUTION WITH PROTEIN ADDITION, NOORHIDAYAH BINTI ABDUL AZIZ
  3. (2019) STRENGTHENING MECHANISM AND CORROSION STUDY OF MAGNESIUM BASED ALLOYS COMPOSITE WITH ADDITION OF GRAPHENE NANOPLATELETS (GNPS) REINFORCEMENT, NUR ATIQAH BINTI NASIR
  4. (2019) CORROSION RESISTANCE AND BIOCOMPATIBILITY OF MAGNESIUM - NIOBIUM ALLOY COATED WITH POLYCAPROLACTONE (PCL) AT DIFFERENT COATING THICKNESS, NUR FATIHAH SAADIQIN BINTI AHMAD ZAUTI
  5. (2018) Fabrication and Characterization of Magnesium Alloy Reinforce with Ghraphene Nanoplatelets (Mg0.2Mn/GNPs) for Medical Implants, NUR ANIS MAT NOOR
  6. (2015) STRENGTHENING MECHANISM AND CORROSION STUDY OF MAGNESIUM BASED ALLOYS COMPOSITE WITH ADDITION OF GRAPHENE NANOPLATELETS (GNPS) REINFORCEMENT, NUR ATIQAH BINTI NASIR
  7. (2015) Fabrication and Characterization of Magnesium Alloy Reinforce with Ghraphene Nanoplatelets (Mg0.2Mn/GNPs) for Medical Implants, NUR ANIS MAT NOOR
  8. (2015) CORROSION RESISTANCE AND BIOCOMPATIBILITY OF MAGNESIUM - NIOBIUM ALLOY COATED WITH POLYCAPROLACTONE (PCL) AT DIFFERENT COATING THICKNESS, NUR FATIHAH SAADIQIN BINTI AHMAD ZAUTI
  9. (2014) MAGNESIUM AND ITS ALLOY FOR MEDICAL APPLICATIONS, NOORHIDAYAH BINTI ABDUL AZIZ
  10. (2012) -, TAY SHIAU FONG
  11. (2009) Synthesis and development of nanocomposites metamaterials at microwave and optical frequency, Noorsaiyyidah Binti Darman Singho
  12. (2009) Nanocomposites polymer electrolytes with CNT, Suriani Binti Ibrahim
  13. (2009) Metallic Nanocatalyst, Tay Shiau Fong (851028015630)
  14. (2009) Carbon nanotubes, Tan Kim Han
Under Graduate Students
  1. (2015) Effect Of Graphene Nanoplates (Gnps) On Mechanical Properties Of Magnesium Composite.
  2. (2014) Ti/GnP composites and Titanium surface modification for biomedical applications
  3. (2013) Surface modification and nano paterning for biomedical applications
  4. (2009) Mechanical Alloying composite materials
  5. (2008) Synthesis and Characterization of MMC Al/SiC and Mechanical alloying of Ni-Al
  6. (2007) Anti microbial properties in AgO nano particles

TEACHING

Bachelor
  1. (2016) KMEB2101 - Phase Diagram and Transformations
  2. (2016) KMEB2101 - Phase Diagram and Transformations
  3. (2016) KMEB2108 - Polymer Science and Technology
  4. (2016) KMEB2204 - Polymer Engineering
  5. (2015) KMEB2101 - Phase Diagram and Transformations
  6. (2015) KMEB2108 - Polymer Science and Technology
  7. (2014) KMEB2101 - Phase Diagram and Transformations
  8. (2014) KMEB2108 - Polymer Science and Technology
  9. (2012) KMEB2110 - Basic Ceramics
  10. (2011) KMEB2110 - Basic Ceramics
  11. (2011) KMEB2205 - Micro Structure and Phase Transformation
  12. (2011) KMEB2205 - Micro Structure and Phase Transformation
  13. (2011) KXEX2163 - Thinking and Communication Skills
  14. (2010) KMEB1101 - Communication Skills
  15. (2010) KMEB2204 - Polymer Engineering
  16. (2009) KMEB1101 - Communication Skills
  17. (2009) KMEB2204 - Polymer Engineering
  18. (2008) KMEB1101 - Communication Skills
  19. (2007) KMEB1101 - Communication Skills
  20. (2007) KMEB2108 - Polymer Science and Technology
  21. (2002) KMEB2204 - Polymer Engineering
  22. (2002) KMEB3337 - Advanced Composite Materials
  23. (2002) KMEB3337 - Advanced Composite Materials
  24. (2001) KMEB2108 - Polymer Science and Technology
  25. (2001) KMEB2122 - Polymer Engineering
  26. (2000) KMEB1120 - Production of Materials
  27. (2000) KMEB2108 - Polymer Science and Technology
  28. (2000) KMEB2111 - Polymer Science and Technology
  29. (2000) KMEB2123 - Electronic Materials and Devices
  30. (2000) KMEB3342 - Production of Materials
  31. (1999) KMEB2111 - Polymer Science and Technology
  32. (1999) KMEB2122 - Polymer Engineering

SOCIAL RESPONSIBILITY ACTIVITIES

  • Technical Committe for Malaysian Standard Development: Steel for The Reinforcement and Prestressing of Concrete, (23 Jul 2012 - 23 Jul 2012)
  • Technical Committe for Malaysian Standard Development: Metallic Materials - Vickers Hardnes Test, (10 Apr 2012 - 10 Apr 2012)
  • Technical Committee for Malaysian Standard Development,"Steel Library Shelving - Specification (First Revision), (01 Jan 2010)