PERSONAL DETAIL


DR. RAJA ARIFFIN BIN RAJA GHAZILLA

Senior Lecturer
Department of Mechanical Engineering
Faculty of Engineering
 
  03-79675250
  r_ariffin@um.edu.my
 Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, W.Persekutuan Kuala Lumpur, Malaysia
 
ResearcherID Link
  http://www.researcherid.com/rid/B-9540-2010

ACADEMIC QUALIFICATION
(Qualification), (Institution).



PROFESSIONAL
(Organisation), (Role), (Year), (Level).


  • Persatuan kakitangan Universiti Malaya, 2nd Vice President, 2018 to 2018, (University)
  • UM Centre for Research in Industry 4.0, Academic Member, 2018 to 2020, (University)

ADMINISTRATIVE DUTIES
(Role), (Level), (Start date),(End Date).


  • Deputy Dean of Development, Dean's Office, Faculty of Engineering, 16/01/2021 to 31/12/2021
  • Pengerusi Jawatankuasa Semakan Kurikul Program B.Eng Mechanical, Faculty, 01/01/2020 to 31/12/2020
  • Jawatankuasa Pengurusan Aset (Selain Penyelidikan, University Malaya, 01/01/2020 to 31/12/2020
  • AJK UM Lab Safety Training Module , University Malaya, 01/11/2019 to 30/03/2020
  • Pengerusi Jawatankuasa Jaminan Kualiti Fakulti, Faculty, 01/08/2019 to 01/08/2020
  • AHLI JAWATANKUASA PENGURUSAN EKO KAMPUS & LrvrNG LAB UNIVERSITI MALAYA (JKEKOUM) , University Malaya, 23/07/2019 to 23/07/2020
  • Pengerusi Jawatankuasa Keselamatan dan Kesihatan Pekerjaan Fakulti, Faculty, 01/02/2019 to 26/12/2020
  • Deputy Dean of Development, Dean's Office, Faculty of Engineering, 16/01/2019 to 15/01/2021
  • Ahli Jawatankuasa Pengurusan Aset Universiti Malaya, University Malaya, 01/01/2019 to 31/12/2020
  • Acting Deputy Dean, Faculty, 01/11/2018 to 31/12/2018
  • Ahli Jawatankuasa Perolehan Perisian Makmal Fakulti, Faculty, 02/01/2018 to 31/12/2018
  • Coordinator, Faculty, 01/10/2017 to 31/08/2018
  • Acting Head of Department, Faculty, 09/08/2017 to 23/08/2017
  • Deputy Chairman of Curriculum Review Committee, Faculty, 01/06/2017 to 01/12/2017
  • Penilain Prestasi Khas- Exit Policy, University Malaya, 15/05/2017 to 15/05/2018
  • Acting Head of Department, Faculty, 04/04/2017 to 08/04/2017
  • Student Selection Committee - Mechanical Engineering program, University Malaya, 10/03/2017 to 01/12/2017
  • Jawatankuasa Teknikal dan Penilaian Sebut Harga, University Malaya, 04/03/2017 to 04/04/2017
  • Jawatankuasa Bidang Kepakaran Jabatan, Faculty, 28/11/2016 (JAwaankuasa Bidang Kepakaran)
  • Penasihat Akademik Jabatan, Faculty, 01/11/2016 to 31/12/2017 (Penasihat Akademik)
  • Programme Coordinator, Faculty, 01/08/2016 to 31/07/2017 (Coordinator for CAD/M and Product Design Programme)
  • Ahli Jawatankuasa Tesis Tahun Akhir, Faculty, 01/11/2014 to 01/12/2014
  • Ahli Jawatankuasa Kerja Semakan Kurikulum Program CAD/M Bagi Sessi 2015/16, Faculty, 01/10/2014 to 01/03/2015
  • Pengerusi Jawatankuasa Tender (Spesifikasi Teknikal) Pembelian 25 unit PC untuk Makmal PC, University Malaya, 26/09/2013
  • Member Jawatankuasa Tender (Teknikal dan Spesifikasi) Pembelian Robotik Workcell, University Malaya, 21/08/2013
  • Member Faculty of Engineering Canteen Services Committee , Faculty, 01/06/2013
  • Auditor Audit Kendiri Peringkat Fakulti, Faculty, 07/05/2013 to 08/05/2013
  • Pemeriksa Dalam Jawatankuasa Khas Pemeriksa, Faculty, 17/04/2013
  • Permanent representative Examination Board Committee (J/K Pemeriksa), Faculty, 01/08/2011 to 31/12/2012
  • Committee Member Faculty Level Health and Safety Committee, Faculty, 01/01/2011 to 31/07/2014
  • Deputy Director of Centre for Product Design and Manufacturing, University Malaya, 01/01/2011 to 01/01/2012
  • Jawatankuasa Kesihatan dan Keselamatan Pekerjaan Fakulti Kejuruteraan, Faculty, 01/06/2010

AREAS OF EXPERTISE
(Area).


  • Design for Environment
  • Ergonomic Aspects
  • Design for Manufacturing and Assembly
  • Cad/Cam/Cae Applications


RECENT SELECTED PUBLICATIONS
(Publication).


Chapter in Book

2012
  • Zahari Taha, Abdelhakim Deboucha, Azeddein Kinsheel and Raja Ariffin Bin Raja Ghazilla. 2012. Development of Real-Time Hardware in the Loop Based MPC for Small-Scale Helicopter. In Tao Zheng, Frontiers of Model Predictive Control, pg 133-144. InTech Publishing. ISBN: 978-953-51-0119-2 
Article in Academic Journals

2020
  • Chandrasegaran, D; Ghazilla, RAR; Rich, K 2020. Human factors engineering integration in the offshore OG industry: A review of current state of practice. SAFETY SCIENCE (ISI-Indexed)
  • Wayne S.J., Sakundarini N., May C.C.M., Ghazilla R.A.R., Azmi S.N.S. 2020. Integrating green affective values and material selection in automotive design: A preliminary study. International Journal of Integrated Engineering (SCOPUS-Indexed)
  • Noor, MHHM; Ghazilla, RAR 2020. Physical ergonomics awareness in an offshore processing platform among Malaysian oil and gas workers. INTERNATIONAL JOURNAL OF OCCUPATIONAL SAFETY AND ERGONOMICS (ISI-Indexed)

2019
  • F. Sado, H.J Yap, R.A.R Ghazilla, N. Ahmad, (2019), Design and control of a wearable lower-body exoskeleton for squatting and walking assistance in manual handling works, Mechatronics (63). (ISI-Indexed)
  • Sado, F; Yap, HJ; Ghazilla, RAR; Ahmad, N 2019. Design and control of a wearable lower-body exoskeleton for squatting and walking assistance in manual handling works. MECHATRONICS.  (Tier 2, Impact Factor = 2.423) (ISI-Indexed)
  • Rashid Z., Bakar N.A., Dolah R., Ghazilla R.A.R. 2019. Comparison Study of Malaysian Driver Seating Position in SAEJ1517 Accommodation Model. SAE International Journal of Passenger Cars - Mechanical Systems (SCOPUS-Indexed)
  • Mohamad-Ali N., Raja Ghazilla R.A., Abdul-Rashid S.H., Ahmad-Yazid A. 2019. Aftermarket survey on end-of-life vehicle recovery in Malaysia: Key findings. Journal of Cleaner Production (SCOPUS-Indexed)
  • Mohamad-Ali, N; Ghazilla, RAR; Abdul-Rashid, SH; Ahmad-Yazid, A 2019. Aftermarket survey on end-of-life vehicle recovery in Malaysia: Key findings. JOURNAL OF CLEANER PRODUCTION (ISI-Indexed)
  • Ho F.H., Abdul-Rashid S.H., Ghazilla R.A.R., Woo Y.L. 2019. Resources sustainability through material efficiency strategies: An insight study of electrical and electronic companies. Resources (SCOPUS-Indexed)

2018
  • Nurhasyimah Mohamad‐Ali Raja Ariffin Raja Ghazilla Salwa Hanim Abdul‐Rashid Novita Sakundarini Aznijar Ahmad‐Yazid Lydyaty Stephenie (2018) End‐of‐life vehicle recovery factors: Malaysian stakeholders' views and future research needs, Sustainable Development, https://doi.org/10.1002/sd.1741 (ISI-Indexed)
  • M. Hafizul Hilmi M. Noor & Raja Ariffin Raja Ghazilla (2018) Physical ergonomics awareness in an offshore processing platform among Malaysian oil and gas workers, International Journal of Occupational Safety and Ergonomics, DOI: 10.1080/10803548.2018.1480341 (ISI-Indexed)
  • Sado F., Yap H.J., Ghazilla R.A.R., Ahmad N. 2018. Exoskeleton robot control for synchronous walking assistance in repetitive manual handling works based on dual unscented kalman filter. PLoS ONE (SCOPUS-Indexed)
  • Sado, F; Yap, HJ; Ghazilla, RAR; Ahmad, N 2018. Exoskeleton robot control for synchronous walking assistance in repetitive manual handling works based on dual unscented Kalman filter. PLOS ONE (ISI-Indexed)
  • Kazemi N., Abdul-Rashid S.H., Ghazilla R.A.R., Shekarian E., Zanoni S. 2018. Economic order quantity models for items with imperfect quality and emission considerations. International Journal of Systems Science: Operations and Logistics (SCOPUS-Indexed)
  • Mohamad-Ali, N; Ghazilla, RAR; Abdul-Rashid, SH; Sakundarini, N; Ahmad-Yazid, A; Stephenie, L 2018. End-of-life vehicle recovery factors: Malaysian stakeholders views and future research needs. SUSTAINABLE DEVELOPMENT (ISI-Indexed)
  • Mohamad-Ali N., Ghazilla R.A.R., Abdul-Rashid S.H., Sakundarini N., Ahmad-Yazid A., Stephenie L. 2018. End-of-life vehicle recovery factors: Malaysian stakeholders views and future research needs. Sustainable Development (SCOPUS-Indexed)
  • Ghazali I., Rashid S.H.A., Dawal S.Z.M., Aoyama H., Tontowi A.E., Ghazilla R.A.R. 2018. Green product preferences with respect to cultural influences: Empirical study in indonesia. International Journal of Automation Technology (SCOPUS-Indexed)

2017
  • Abdul-Rashid, SH; Sakundarini, N; Ghazilla, RAR; Thurasamy, R 2017. The impact of sustainable manufacturing practices on sustainability performance Empirical evidence from Malaysia. INTERNATIONAL JOURNAL OF OPERATIONS PRODUCTION MANAGEMENT (ISI-Indexed)
  • Alikar, N; Mousavi, SM; Ghazilla, RAR; Tavana, M; Olugu, EU 2017. Application of the NSGA-II algorithm to a multi-period inventory-redundancy allocation problem in a series-parallel system. RELIABILITY ENGINEERING SYSTEM SAFETY (ISI-Indexed)
  • Alikar, N; Mousavi, SM; Ghazilla, RAR; Tavana, M; Olugu, EU 2017. A bi-objective multi-period series-parallel inventory-redundancy allocation problem with time value of money and inflation considerations. COMPUTERS INDUSTRIAL ENGINEERING (ISI-Indexed)
  • Olugu, EU; Wong, KY; Awaluddin, MS; Abdul-Rashid, SH; Ghazilla, RABR 2017. SUSTAINABLE SUPPLY CHAIN MANAGEMENT IN MALAYSIAN SMEs: PERSPECTIVES FROM PRACTITIONERS. ENVIRONMENTAL ENGINEERING AND MANAGEMENT JOURNAL (ISI-Indexed)
  • Abdul-Rashid S.H., Sakundarini N., Raja Ghazilla R.A., Thurasamy R. 2017. The impact of sustainable manufacturing practices on sustainability performance: Empirical evidence from Malaysia. International Journal of Operations and Production Management (SCOPUS-Indexed)
  • Alikar N., Mousavi S.M., Ghazilla R.A.R., Tavana M., Olugu E.U. 2017. A bi-objective multi-period series-parallel inventory-redundancy allocation problem with time value of money and inflation considerations. Computers and Industrial Engineering (SCOPUS-Indexed)
  • Alikar N., Mousavi S.M., Raja Ghazilla R.A., Tavana M., Olugu E.U. 2017. Application of the NSGA-II algorithm to a multi-period inventory-redundancy allocation problem in a series-parallel system. Reliability Engineering and System Safety (SCOPUS-Indexed)

2016
  • Fu Haw Ho 1,2,*, Salwa Hanim Abdul-Rashid 1,* and Raja Ariffin Raja Ghazilla 1, Analytic Hierarchy Process-Based Analysis to Determine the Barriers to Implementing a Material Efficiency Strategy: Electrical and Electronics Companies in the Malaysian Context,Sustainability 2016, 8(10), 1035; doi:10.3390/su8101035 (ISI-Indexed)
  • Application of the NSGA-II algorithm to a Multi-Period Inventory-Redundancy Allocation Problem in a Series-Parallel System, N Alikar, SM Mousavi, RAR Ghazilla, M Tavana… - Reliability Engineering & System Safety, 2016 (ISI-Indexed)
  • Kazemi, N., Olugu, E. U., Abdul-Rashid, S. H., Ghazilla, R. A. R. 2016. A fuzzy EOQ model with backorders and forgetting effect on fuzzy parameters: An empirical study Computers Industrial Engineering (ISI-Indexed)
  • Quader, M. A., Ahmed, S., Ghazilla, R. A. R., Ahmed, S., Dahari, M. 2016. Evaluation of criteria for CO2 capture and storage in the iron and steel industry using the 2-tuple DEMATEL technique Journal of Cleaner Production (ISI-Indexed)
  • Kazemi, N., Olugu, E. U., Abdul-Rashid, S. H., Ghazilla, R. A. R. 2016. A fuzzy EOQ model with backorders and forgetting effect on fuzzy parameters: An empirical study. Computers Industrial Engineering (ISI-Indexed)
  • Kazemi, N., Olugu, E. U., Abdul-Rashid, S. H., Ghazilla, R. A. R. 2016. A fuzzy EOQ model with backorders and forgetting effect on fuzzy parameters: An empirical study. Computers and Industrial Engineering (SCOPUS-Indexed)
  • Quader, M. A., Ahmed, S., Raja Ghazilla, R. A., Ahmed, S., Dahari, M. 2016. Evaluation of criteria for CO2 capture and storage in the iron and steel industry using the 2-tuple DEMATEL technique. Journal of Cleaner Production (SCOPUS-Indexed)
  • Ho, FH; Abdul-Rashid, SH; Ghazilla, RAR 2016. Analytic Hierarchy Process-Based Analysis to Determine the Barriers to Implementing a Material Efficiency Strategy: Electrical and Electronics Companies in the Malaysian Context. SUSTAINABILITY (ISI-Indexed)

2015
  • Kazemi, N., Olugu, E. U., Abdul-Rashid, S. H., Ghazilla, R. A. B. 2015. Development of a fuzzy economic order quantity model for imperfect quality items using the learning effect on fuzzy parameters Journal of Intelligent Fuzzy Systems (ISI-Indexed)
  • Quader, M. A., Ahmed, S., Ghazilla, R. A. R., Ahmed, S., Dahari, M. 2015. A comprehensive review on energy efficient CO2 breakthrough technologies for sustainable green iron and steel manufacturing Renewable Sustainable Energy Reviews (ISI-Indexed)
  • Masoumi, S. M., Abdul-Rashid, S. H., Olugu, E. U., Ghazilla, R. A. R. 2015. AN INTEGRATED FRAMEWORK- FOR DESIGNING A STRATEGIC GREEN SUPPLY CHAIN WITH AN APPLICATION TO THE AUTOMOTIVE INDUSTRY International Journal of Industrial Engineering-Theory Applications and Practice (ISI-Indexed)
  • M. Abdul Quader, Shamsudin Ahmed, R.A.R Ghazilla, Shameem Ahmed, and Mahidzal Dahari, A Comprehensive Review on Energy Efficient CO2 Breakthrough Technologies for Sustainable Green Iron and Steel Manufacturing, Renewable and Sustainable Energy Reviews, Vol 50 (2015) pp 594-614 (ISI-Indexed)
  • Raja Ariffin Raja Ghazilla, Novita Sakundarini, Salwa Hanim Abdul-Rashid, Nor Syakirah Ayub, Ezutah Olugu, Siti Nurmaya Musa, Drivers and barriers Analysis for green manufacturing practices in Malaysia SMEs: A Preliminary Findings, Procedia CIRP, pg 658-663 (2015) (SCOPUS-Indexed)
  • R.A.R. Ghazilla, Novita Sakundarini, Z.Taha, Salwa Hanim Abdul-Rashid and Sumiani Yusoff, Design for Environment and Design for Disassembly Practices in Malaysia: A Practitioners Perspectives, International Journal of Cleaner Production, DOI 10.1016/j.jclepro.2015.06.033 (ISI-Indexed)
  • S.Maryam Masoumik, Salwa Hanim Abdul-Rashid, Ezutah Udoncy Olugu and R.A.R Ghazilla, A Strategic Approach to Develop Green Supply Chain, Procedia CIRP, pg 670- 676 (2015) (SCOPUS-Indexed)
  • S.Maryam Masoumik, Salwa Hanim Abdul-Rashid, Ezutah Udoncy Olugu and R.A.R Ghazilla, An Integrated Theoritical Framework for Designing Strategic Green Supply Chain, International Journal of Industrial Engineering: Theory, Application and Practices, 2015 (ISI-Indexed)
  • Nima Kazemi, Ezutah Udoncy Olugu, Salwa Hanim Abdul-Rashid, Raja Ariffin Raja Ghazilla. Developmet of a Fuzzy Economic Order Quantity model for Imperfect Quality Items by Using the Learning Effect on Fuzzy Parameters, Journal of Intelligent and Fuzzy Systems, DOI 10.3233/IFS-14159, ( 2015) (ISI-Indexed)
  • S.Maryam Masoumik, Salwa Hanim Abdul-Rashid, Ezutah Udoncy Olugu and R.A.R Ghazilla, An Integrated Theoritical Framework for Designing Strategic Green Supply Chain with an Application to the Automotive Industries, International Journal of Industrial Engineering, Vol 21 (2015) pp 46-61 (ISI-Indexed)
  • Sakundarini, N., Taha, Z., Ghazilla, R. A. R., & Abdul-Rashid, S. H. (2015). A methodology for optimizing modular design considering product end of life strategies. International Journal of Precision Engineering and Manufacturing, 16(11), 2359-2367. (ISI-Indexed)
  • Taha, Z., Deboucha, A., Ahamed, N. U., Ahmed, N., Ariffin, R., Ghazilla, R., Majeed, A., Wong, Y. 2015. IIR Filter Order and Cut-off Frequency Influences on EMG Signal Smoothing Biomedical Research-India (ISI-Indexed)
  • Ghazilla, R. A. R., Sakundarini, N., Taha, Z., Abdul-Rashid, S. H., Yusoff, S. 2015. Design for environment and design for disassembly practices in Malaysia: a practitioner\s perspectives Journal of Cleaner Production (ISI-Indexed)

2014
  • Kasi, V., Mekhilef, S., Ghazilla, R. A. R., Ahmad, N. 2014. Robotic system development for cooperative orthopedic drilling assistance. Advances in Mechanical Engineering (SCOPUS-Indexed)
  • Sakundarini, N., Taha, Z., Abdul-Rashid, S. H., Ghazilla, R. A. R. 2014. Incorporation of high recyclability material selection in computer aided design Materials Design (ISI-Indexed)
  • Ghazilla, R. A. R., Taha, Z., Yusoff, S., Rashid, S. H. A., Sakundarini, N. 2014. Development of decision support system for fastener selection in product recovery oriented design International Journal of Advanced Manufacturing Technology (ISI-Indexed)
  • Masoumik, S. M., Abdul-Rashid, S. H., Olugu, E. U., Ghazilla, R. A. R. 2014. Sustainable Supply Chain Design: A Configurational Approach Scientific World Journal (ISI-Indexed)
  • Sharif Muhammad Taslim Reza, Norhafizan Ahmad, Imtiaz Ahmed Choudry and Raja Ariffin Raja Ghazilla. A Fuzzy Controller for Lower Limb Exoskeletons during Sit-to-Stand and Stand-to-Sit Movement using Wearable Sensors, Sensors, vol 14(3), DOI 10.3390/s140304342, pp 4342-4363 (ISI-Indexed)
  • S.Maryam Masoumik, SalwaHanim Abdul-Rashid, Ezutah Udoncy Olugu and Raja Ariffin Raja Ghazilla. Sustainable Supply Chain Design: A Configurational Approah, The Scientific World Journal , DOI.10.1155/2014/897121 (ISI-Indexed)

2013
  • Novita Sakundarini, Zahari Taha, Salwa Hanim Abdul-Rashid, Raja Ariffin Raja Ghazila. 2013.Optimal multi-material selection for lightweight design of automotive body assembly incorporating recyclability.Materials and Design 50 (2013) 846�857 (ISI-Indexed)
  • Novita Sakundarini, Zahari Taha, Salwa Hanim Abdul-Rashid, Raja Ariffin Raja Ghazilla. 2013. Incorporation of high recyclability material selection in computer aided design.Materials and Design 56 (2014) 740�749 (ISI-Indexed)
  • Raja Ariffin Raja Ghazilla,Zahari Taha, Sumiani Yusoff, Salwa Hanim Abdul Rashid, Novita Sakundarini. 2013. Development of decision support system for fastener selection in product recovery oriented design.Int J Adv Manuf Technol (ISI-Indexed)
  • Novita Sakundarini,Zahari Taha, Salwa Hanim Abdul- Rashid, Raja Ariffin Ghazilla, Julirose Gonzales.2013. Multi-objective optimization for high recyclability material selection using genetic algorithm. Int J Adv Manuf Technol (2013) 68:1441 1451 (ISI-Indexed)
  • Norhafizan Ahmad, Raja Ariffin Raja Ghazilla, and Nazirah M. Khairi. 2013. Reviews on Various Inertial Measurement Unit (IMU) Sensor Applications.International Journal of Signal Processing Systems Vol. 1, No. 2 December 2013 (Non-ISI/Non-SCOPUS)
  • Sakundarini, N., Taha, Z., Abdul-Rashid, S. H., Ghazila, R. A. R. 2013. Optimal multi-material selection for lightweight design of automotive body assembly incorporating recyclability Materials Design. (Tier 1, Impact Factor = 2.913) (ISI-Indexed)
  • Siti Zawiah Dawal, Raja Ariffin Raja Ghazilla, Hilma Raimona Zadry, Mirta Widia, Nor Suliani Abdullah. 2013. Incorporating ergonomics evaluation in assembly and disassembly of repetitive task: focusing in load task. advance material research 712-715 (2013) (SCOPUS-Indexed)
  • Zuli�zam Rashid, Nooh Abu Bakar1,Raja Ariffin Raja Ghazilla,Comparison of Malaysian and SAE J833 anthropometric proportions for vehicle package design,Advanced Engineering Forum Vol. 10 (2013) pp 336-344 (SCOPUS-Indexed)

2012
  • Raja Ghazila, R. A., Taha, Z., Abdul Rashid, S.H., Sakundarini, N., Gonzales, J., (2012).Product recovery oriented approach for fastener selection during conceptual design, International Journal of Sustainable Design, Vol. 2, No. 1, 64-82. 
  • Sakundarini, N., Taha, Z., Ghazilla, R. A. R., Rashid, S. H. A., Gonzales, J. 2012. A FRAMEWORK OF INTEGRATED RECYCLABILITY TOOLS FOR AUTOMOBILE DESIGN International Journal of Industrial Engineering-Theory Applications and Practice. (Tier 4, Impact Factor = 0.154) (ISI-Indexed)
  • Novita Sakundarini, Zahari Taha, Raja Ariffin Raja Ghazilla, Salwa Hanim Abdul Rashid, Julirose Gonzales. A Framework of Integrated Recyclability Tools For Automobile Design. International Journal of Industrial Engineering: Theory, Applications and Practice (ISI-Indexed)
  • Hussin, M.S.A, Ghazilla, R.A.R, Widia, M. Pilot Investigation on the Driving Posture Comfort among malaysian drivers, Advanced materials Research. Vols. 605-607 (2013) pp 466-471 (SCOPUS-Indexed)

2011
  • Taha, Z., Gonzales, J., Abdul Rashid, S.H., Sakundarini, N., Raja Ghazila, R.A., 2011, Optimization of Product Design to Reduce the Environmental Impact of MachiningIEMS Vol. 10, No. 2, pp. 128-133. (Non-ISI/Non-SCOPUS)

2010
  • Zahari TAHA, Hani-kurniati LELANA, Hideki AOYAMA, Raja Ariffin RAJA GHAZILLA, Julirose GONZALES, Novita SAKUNDARINI, Sugoro BHAKTI. 2010. Insert geometry effects on surface roughness in turning process of AISI D2 steel. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)11(12) (ISI-Indexed)
  • Z. Taha, R.A Ghazilla, N. Sakundarini, J. Gonzales and H. Lelani. Eco Design In Malaysia: Challenges and Oppurtunities. Journal of Research and Applied Science. (SCOPUS-Indexed)
  • Raja Ariffin Raja Ghazilla, Zahari Taha, Suraya Kamaruddin and Iskandar Hasanuddin. 2010. Pilot Investigation on the Mismatches of Classroom Furniture and StudentBody Dimensions in Malaysian Secondary Schools. Journal of Social Sciences 6 (2): 287-292 (Non-ISI/Non-SCOPUS)

2006
  • R.A.R.Ghazilla, Z.Taha, S.H.A.Rashid, iskandar, Nazaruddin and S.H.Sajeli. Classroom Furniture and Student Body Dimensions in East Malaysian Primary Schools, Indonesian Psychological Journal, Vol. 21, No.2, pp 161-168, January 2006. (Non-ISI/Non-SCOPUS)
Proceeding

2011
  • Raja Ariffin Raja Ghazila, Zahari Taha, Novita Sakundarini, Salwa Hanim, Julirose Gonzales.2011 . Proceeding of The 7th International Conference on Intelligent Manufacturing & Logistics Systems (Non-ISI/Non-SCOPUS)

2010
  • ZAHARI TAHA, HANI KURNIATI, HIDEKI AOYAMA, RAJA ARIFFIN GHAZILLA, JULIROSE GONZALES, NOVITA SAKUNDARINI. 2010. LINKAGE OF POWER CONSUMPTION TO DESIGN FEATURE ON TURNING PROCESS. Proceedings of the 10th WSEAS Int. Conference on ROBOTICS, CONTROL and MANUFACTURING TECHNOLOGY (ISI-Indexed)
  • Zahari Taha, Julirose Gonzales, Novita Sakundarini, Raja Ariffin Raja Ghazila. Optimization of Product Design to reduce Environmental Impact of Machining. Proceeding of 11th Asia Pacific Industrial Engineering and Management Systems Conference 
  • Zahari Taha, Novita Sakundarini, Raja Ariffin Raja Ghazila, Julirose Gonzales and Salwa Hanim. A Decision Making Model to Improve Recyclability in Product Design. Proceeding of the 11th Asia Pacific Industrial Engineering and Management Systems Conference (Non-ISI/Non-SCOPUS)
  • Zahari Taha, Raja Ariffin Raja Ghazila, Novita Sakundarini, Julirose Gonzales. Fastener selection decision making model for ease of disassemblability. Proceeding of 11th Asia Pacific Industrial Engineering and Management Systems Conference 
  • Zahari Taha, Rossi Passarella, Hui Xin How, Jamali Md Sah, Ahmad, N., Raja Ariffin Raja Ghazilla, and Hwa Jen Yap (2010), Application of Data Acquisition and Telemetry System into a Solar Vehicle, The 2nd International Conference on Computer Engineering and Applications (ICCEA 2010), pp 96-102, 19-21 March 2010, Bali, Indonesia 
  • Zahari Taha, Hani Kurniati, Hideki Aoyama, Raja Ariffin Raja Ghazila, Julirose Gonzales, Novita Sakundarini, Linkage Of Power Consumption To Design Feature On Turning Process, Proceedings Of The 10th Wseas Int. Conference On Robotics, Control And Manufacturing Technology, China, 2010. 
  • Zahari Taha,Hani-kurniati Lelana,Hideki Aoyama, Raja Ariffin Raja Ghazilla, Julirose Gonzales, Novita Sakundarini, Sugoro B.Sutono, Insert Geometry Effects on Surface roughness in turning process of AISI D2 Steel, The 11th Asia Pacific Industrial Engineering and Management Systems Conference., Melaka, Malaysia, 7-10 December 2010. 

2009
  • Hani Lelana, Zahati Taha, Ayoma Hideki, Raja Ariffin Raja Ghazilla, Novita Sakudarini, Julie Rose Gonzales, 2009, Power Consumption of Latte Machine for Life Cycle Inventory Development, EcoDesign 2009 Conference, Sapporo, Japan. 
  • Zahari Taha, Raja Ariffin Raja Ghazilla, Novita Sakundarini. 2009. Eco Design In Malaysia: Challenges and Opportunities, Proceeding International Society for Industrial Ecology Conference, Lisbon, Portugal, 
Others

2005
  • A simulation program for mobile robot in OpenGL, T.Firsa, Z.Taha, R.A. Ghazilla, Yap H.J, International Workshop on Aritificial Life and Robotics (AROB’05), Kangar Malaysia 2005 
  • Preliminary Investigation of on the mismatches between classroom furniture and children body dimensions, S.H.A Rashid, R.A. Ghazilla, Z. Taha, 8th South East Asia Ergonomics Society Conference, Bali Indonesia 2005 

2003
  • An ergonomics study of Malaysian workers performing strenuous repetitive task under hot working environment, S.H.A Rashid, R.A. Ghazilla, S.Z.M. Dawal, Z. Taha, 7th South East Asian Ergonomics Society and 4th Malaysian Ergonomics Conference on “Ergonomics and Design Innovations for Regional Prosperity”, Kuching, 19-22 May 2003 

2002
  • TOMMIE: A Computer Aided Ergonomics Design at the Conceptual Stage, R.A. Ghazilla, Z. Taha, International Conference on Artifical Intelligence in Engineering and Technology , Kota Kinabalu, 2002 

2001
  • Biomechanic Analysis from Motion Data, Z. Taha, Iskandar, Nazaruddin, R.A. Ghazilla, S.S. Syed Salim Agha, 6th Pan Pacific Conference on Occupational Ergonomics, Beijing China,21-24 August 2001 
  • Anthopometrics Data Of Malaysian Industrial Workers, Z. Taha, Iskandar, Nazaruddin, R.A. Ghazilla, S.S. Syed Salim Agha 6th Pan Pacific Conference on Occupational Ergonomics Beijing China,21-24 August 2001 
  • Perception and Attitude of Malaysian Industrial Workers towards their existing workplace, Z. Taha, Iskandar, Nazaruddin, R.A. Ghazilla, S.S. Syed Salim Agha, 6th Pan Pacific Conference on Occupational Ergonomics, Beijing China,21-24 August 2001 
  • Perception and Attitude of Industrial Workers towards their existing workplace, Z. Taha, Iskandar, Nazaruddin, R.A. Ghazilla, S.S. Syed Salim Agha Malaysian Ergonomics Conference 2001Penang,17/18 April 2001 
  • Man Modelling System in Ergonomic Design Process, Z. Taha, Iskandar, Nazaruddin, R.A. Ghazilla, S.S. Syed Salim Agha, National Seminar on Design For the New Millennium, 15 January 2001, Johor Bahru 
  • Human Motion Measurement System Using Video, Z. Taha, Iskandar, Nazaruddin, R.A. Ghazilla, S.S. Syed Salim Agha National Seminar on Design For the New Millennium Johor Bahru,15 January 2001 
  • Development of Conceptual Ergonomics Design Tools: Man Modelling Method, Z. Taha, Iskandar, Nazaruddin, R.A. Ghazilla, S.S. Syed Salim Agha, 6th Pan Pacific Conference on Occupational Ergonomics, Beijing China, 21-24 August 2001 
  • Biomechanical Modeling, Z. Taha, Iskandar, Nazaruddin, R.A. Ghazilla, S.S. Syed Salim Agha National Seminar on Design For the New Millennium Johor Bahru,15 January 2001 

2000
  • An Ergonomics Study of Malaysian Industrial workers, Z. Taha, Iskandar, Nazaruddin, R.A. Ghazilla, S.S. Syed Salim Agha Asean Ergonomics 2000 Conference Singapore,27-29 November 2000. 
  • Man Modelling System in Product Design, Z. Taha, R.A. Ghazilla, Malaysian Ergonomic Seminar 2000, 4-5 April 2000,Kuala Lumpur  

AREAS OF RESEARCH
(Project title), (Role), (From)-(Until), (Level), (Source).


  • Subject-adaptable Modular Exoskeleton For Elderly Worker Mobility Assistance, Principal Investigator(PI), 2018 - 2021, RU Geran - Fakulti Program, (National)
  • An Investigation Into Cultural Influence Towards Industrial Revolution 4.0 (ir 4.0) Technology Readiness And Acceptance Among Malaysian Small And Medium (smi) Manufacturers., Consultant, 2018 - 2021, RU Geran - Fakulti Program, (National)
  • Characterization Of Dynamic Network Effects For Automotive End Of Life Recovery Towards Enhancing Sustainable Automotive Development, Principal Investigator(PI), 2016 - 2019, Fundamental Research Grant Scheme (FRGS), (National)
  • A Computerized Diagnostic Tools For Component And Resources Recovery, Consultant, 2015 - 2019, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC)), (University)
  • Development Of Sustainable Design Information System To Enhance Products Environmental Performance, Consultant, 2015 - 2019, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC)), (University)
  • Plant Species Identification Using Augmented Reality, Consultant, 2015 - 2019, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC)), (University)
  • Development Of Multicriteria Decision Making Model For Selecting Green Manufacturing Practices In Malaysian Smes, Principal Investigator(PI), 2015 - 2017, Postgraduate Research Grant (PPP) - Research, (National)
  • Development Of Automotive Interior Package Design Assessment Model, Principal Investigator(PI), 2014 - 2016, MOSTI-Science Fund, (National)
  • Design And Development Of An Augmented Reality-based Simulation And Training System For Cnc Milling Machine, Consultant, 2014 - 2016, MOSTI-Science Fund, (National)
  • Method For Optimizing Material And Manufacturing Process Selection To Reduce Environmental Impact In Conceptual Design, Consultant, 2014 - 2016, Bantuan Kecil Penyelidikan (BKP), (National)
  • DEVELOPMENT OF UNIVERSITY-INDUSTRY COLLABORATION SELECTION MODEL FOR ENGINEERING RESEARCH, Consultant, 2014 - 2016, Research Officer Grant Scheme (ROGS), (National)
  • Method for optimizing material and manufacturing process selection to reduce environmental impact in conceptual design, Co-Investigator, 2014 - 2016, BKP University of Malaya, (National)
  • DEVELOPMENT OF OLYMPIC SCALE OF RECURVE BOW AND ARCHERY FOR LOCAL JUNIOR ATHLETES UNDER 15 AND 17 (U-15 & U-17), Consultant, 2013 - 2014, Program Rakan Penyelidikan UM, (University)
  • Investigation And Proposition Of Hybrid Sustainable Manufacturing Model For The Smes, Principal Investigator(PI), 2013 - 2017, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC)), (University)
  • Integrated Production Planning and Decision Analysis Systems for SMEs, Co-Investigator, 2012 - 2016, High Impact Research (HIR), (University)
  • Exoskeleton Robotics Devices For Limb Impairment Support, Co-Investigator, 2012 - 2015, High Impact Research (HIR), (University)
  • An Investigation into a sustainable manufacturing strategy practices by Malaysian manufacturers, Co-Investigator, 2011 - 2013, Fundamental Research Grant Scheme (FRGS), (University)
  • Fundamental development and experimental validation of immersed boundary and finite element methods for interaction of a 3D elastic body and fluid by two-stage correction of velocity and pressure., Co-Investigator, 2011 - 2013, Fundamental Research Grant Scheme (FRGS), (University)
  • Ergonomic Assessment System for Assembly Task in Manufacturing Industry, Principal Investigator(PI), 2011 - 2013, Exploratory Research Grant Scheme (ERGS), (University)
  • Network Configuration Design for Sustainable Supply Chains in Automotive Industries, Co-Investigator, 2011 - 2014, Exploratory Research Grant Scheme (ERGS), (University)
  • Investigating and Developing an Integrated Material Efficiency Strategy Framework and Tool for Malaysian Industry, Co-Investigator, 2010 - 2013, Geran Penyelidikan Universiti Malaya (UMRG), (University)
  • CENTRE FOR PRODUCT DESIGN AND MANUFACTURING (CPDM)- OPEX, Principal Investigator(PI), 2010 - 2011, Centre of Research , (National)
  • Development Of Hybrid Force Control For Robot Drilling System., Co-Investigator, 2009 - 2010, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • Development Of A Design Of Eco-Manufacturing Evaluation And Optimization Method., Principal Investigator(PI), 2009 - 2011, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • Design And Fabrication Of The High Performance Shoe For Sepak Takraw Players, Co-Investigator, 2009 - 2011, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • DEVELOPMENT OF A DESIGN OF ECO-MANUFACTURING EVALUATION AND OPTIMIZATION METHOD, Principal Investigator(PI), 2009 - 2011, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • Development of Hybrid Position/Force Control for Robot Drilling System., Co-Investigator, 2009 - 2012, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • Development of an environmental index to predict workers comfort, performance and productivity in Malaysian industries, Co-Investigator, 2008 - 2010, MOSTI, (National)
  • Development of A Computer-based Qualitative Eco Tool for Concept Generation and Selection Stage : Eco-Concept., Principal Investigator(PI), 2007 - 2009, , (National)
  • Design, Fabrication and Test of An Efficient Turbine blade for Oscillating Water Column Devices, Co-Investigator, 2007 - 2009, , (National)
  • Design, Fabrication and Test of An Efficient Turbine blade for Oscillating Water Column Devices, Co-Investigator, 2007 - 2009, Fundamental Research Grant Scheme (FRGS), (National)
  • Virtual Reality Programme And Simulation System For Industrial Robot, Co-Investigator, 2007 - 2009, TechnoFund, (National)
  • Design, Fabrication and Test of An Efficient Turbine blade for Oscillating Water Column Devices, Co-Investigator, 2007 - 2009, ScienceFund, (National)
  • Building integrated photovoltaic technology - Manufacturing Group (UNDP/GEF), Co-Investigator, 2006 - 2009, UNDP/GEF, (National)
  • Hardware In-The-Loop Simulation for Control System Designs of Mini Scale Rotorcraft, Co-Investigator, 2006 - 2008, ScienceFund, (National)
  • Development of a Multi-feature Recognition System for Autonomous Mobile Robot, Co-Investigator, 2006 - 2008, ScienceFund, (National)
  • Development Of A Robotic Drilling System With Haptic Interface, Co-Investigator, 2006 - 2008, ScienceFund, (National)
  • Development of A Robotics Drilling System with Haptic Interface, Co-Investigator, 2006 - 2008, ScienceFund, (National)
  • Hardware in the Loop Simulation for Control System Designs of Mini Scale Rotorcraft., Co-Investigator, 2006 - 2008, ScienceFund, (National)
  • Development of A Multi-Feature Recognition System for Autonomuos Mobile Robot, Co-Investigator, 2006 - 2008, ScienceFund, (National)
  • Development of a Multi-feature Recognition System for Autonomous Mobile Robot., Principal Investigator(PI), 2006 - 2008, ScienceFund, (National)
  • Malaysian Building Integrated Photovoltaic (MBIPV), Co-Investigator, 2005 - 2010, UNDG/GEF-PTM, (National)
  • Fuel system; direct injection natural gas technology, Co-Investigator, 2003 - 2006, MOSTI(IRPA), (National)
  • Development of Multilocking Pulley, Co-Investigator, 2002 - 2003, IGS, (National)
  • Ergonomics problem and solution for Malaysian industry: how to enchance safe workplace and optimize productivity by improving ergonomics factors in workplace, Co-Investigator, 2000 - 2002, IRPA, (National)
  • The ergonomics problem and solutions for Malaysian Industries ; How to enhance safe workplace and optimize productivity by improving the ergonomics factors in workplace., Co-Investigator, 1999 - 2001, IRPA, (National)

CONSULTATION PROJECT/CONSULTANCY
(Project title), (Role), (From)-(Until), (Organisation).


  • PERBINCANGAN MEJA BULAT BAGI KAJIAN LAPORAN KELESTARIAN FAKULTI/PTj (FACULTY SUSTAINABILITY REPORT CARD), Resource Person, 2019-2019, UMCARES
  • Projek Kisah Plastik Dengan Kerjasama Water Warrirors Universiti Malaya, Consultant, 2018-2018, JPPHB- Universiti Malaya
  • DFMA Training for Panasonic Malaysia, Resource Person, 2018-2018, Panasonic Malaysia
  • Effect of Cantas on User s Health, 2011-09-01-2011-09-01, Malaysian Palm Oil Board (MPOB)
  • 1 day -Rapid prototyping technology training for polytechnics lecturers- Akademi Caddcam Sdn Bhd, Consultant, 2011-2011, Akademi Caddcam Sdn Bhd
  • CAM and CNC Training for Graduate Engineers, Project Leader, 2011-2011, Kawader Altanmiah (Saudi Arabia-Riyadh)
  • Ergonomics Proficiency Training, Consultant, 2011-2011, Fakulti Ekologi Manusia, Universiti Putra Malaysia
  • Introduction rapid prototyping training, Project Leader, 2010-2010, Akademi CadCam Sdn Bhd
  • Engine Bracket Mounting Test, 2009-2009, PHN
  • Courseware Development for Engineering Techonology Form 5 and Civil Engineering Form 5., Consultant, 2009-2010, BTP, Ministry of Education
  • Design and Development of Automated Shopping Cart Cleaning System, 2009-2010, MediChange Sdn Bhd
  • Factory Audit, 2009-2009, Promat ESM
  • Strength Measurement Equipment, 2009-2009, Universiti Putra Malaysia.
  • Development of Plastic Injection Mould for Cable Holder, 2009-2009, Omnipro Sdn Bhd.
  • Reengineering of rubber insulator, 2009-2009, Omnipro Sdn Bhd.
  • Ergonomics Audit of Current and Tanjung Maim Trim and Final Line Design, 2009-2009, Proton Berhad
  • Development of Packaging Unit, 2009-2009, Polarizone Tech Sdn Bhd.
  • Factory Audit, 2008-2008, Kilang papan EN Yusof dan Anak-anak (Trg)
  • Design of Dental Film Holder, Project Leader, 2008-2009, Dr Kathiravan
  • Bahagian Teknologi Pendidikan (Penyediaan E-Bahan, Bahagian Teknologi Pendidikan, Kementerian Pelajaran Malaysia (Matapelajaran 1.Teknologi Kejuruteraan Tingkatan 5 dan 2.Kejuruteraan Awam Tingkatan 5)), Consultant, 2008-2010, Bahagian Teknologi Pendidikan
  • Harmonic Test for engine mounting bracket, 2007-2007, APM Plastics Sdn Bhd.
  • Scratch resistant test for side protector moulding, 2007-2007, APM Plastics Sdn Bhd.
  • Development of Plastic Injection Mould for Jointed Connector, 2006-2006, Omnipro Sdn Bhd.
  • Development of Plastic Injection Mould IPC 108 Nylon (1), 2006-2006, Omnipro Sdn Bhd.
  • Development of Plastic Injection Mould IPC 108 Nylon (2), 2006-2006, Omnipro Sdn Bhd.
  • Non Linear Static Stress Analysis of a new power cable clamp, 2006-2006, Omnipro Sdn Bhd.
  • Design And Development of A Demo-Prototype For Underwater Cleaning Vehicle, 2006-2006, Solidium Sdn Bhd
  • Development of Plastic Injection Mould IPC 108 PVC, 2006-2006, Omnipro Sdn Bhd.
  • Development of Plastic Injection Mould for Connector, 2006-2006, Omnipro Sdn Bhd.
  • Ergonomics Study of MVF Plant, 2003-2003, Proton Berhad
  • Design of Metalizing Machine, Researcher, 2002-2002, Metro Vibrant
  • Analysis of Aluminium Coupling, Researcher, 2001-2002, Bugs Tan
  • Cross Cultural User Interface Survey West Malaysia., 2000-2000, Honeywell Ind.

AWARDS AND RECOGNITIONS
(Name of Award), (Awarding Institution), (Year Awarded), (Level).


  • Best Paper Award, Ecodesign 2017 Committee, 2017, (International)
  • Certificate of Excellent Service, University Malaya, 2017, (University)
  • Judge Tug-of-War Robotics Competition, University of Malaya, 2013, (University)
  • 22nd International Invention, Innovation and Technology Exhibition, Malaysian Invention and Design Society, 2011, (National)
  • Best Student Paper Award.The 7th International Conference On Intelligent Manufacturing & Logistics Systems., The 7th International Conference On Intelligent Manufacturing & Logistics Systems., 2011, (International)
  • Malaysia Technology Expo (Mte 2011), Malaysian Association of Research Scientists (Mars), 2011, (National)
  • Innovation and Creativity Expo 2010 Silver Medal Award for Ocean Wave Energy Power Generator, University of Malaya, 2010, (University)
  • Innovation and Creativity Expo 2010 Silver Medal Award for Development of a Computer Based Qualitative Ecodesign Tool for Concept Generation and Selection Stage, University of Malaya, 2010, (University)
  • Certificate of Excellent Service, University Malaya, 2004, (University)

PRESENTATIONS
(Title), (Event), (Date Presented), (Organiser), (Level).


PLEANARY/KEYNOTE SPEAKER
  • Eco Design Tools: Current state and directions., Motorola Penang Technical Symposium, 2008-07-15 to  , Motorola Penang, (Industry Symposium)
ORAL
  • Product Design, Universitas Islam Indonesia International Program Product Design Course, 2020-09-01 to 2020-12-31, Universitas Islam Indonesia, (International)
PRESENTER
  • The Development of A Multi Criteria Decision Making Model for Product Recovery Focusing on the Fasteners Selection , International Conference on Intelligent Manufacturing and Logistics System , 2011-02-27 to 2011-03-01, Yuan Ze College of Informatics, Taiwan, (International)
  • Comparison of Malaysian and SAE J833 anthropometric proportions for vehicle package design, 2nd International Conference on Ergonomics, 2013-09-02 to 2013-09-04, Center for Product Design and Manufacturing, University of Malaya, (International)
  • A Review on lower-Limb Exoskeleton System for Sit to Stand, Ascending and Descending Staircase Motion, International Conference on Control, Mechatronics and Automation (ICCMA 2013), 2013-12-06 to 2013-12-07, International Association of Computer Science & Information Technology (IACSIT), (International)

EXPERT LINKAGES
(Linkages Description), (Organisation), (Year of Involvement), (Duration), (Level).


  • International Conference on Applied Sciences, Engineering, Technology & Management (ICASETEM-2019), IFREP and Asia Pacific University of Technology and Innovation, 2019, (International)
  • JEMPUTAN PERBINCANGAN MEJA BULAT BAGI KAJIAN LAPORAN KELESTARIAN FAKULTI/PTj (FACULTY SUSTAINABILITY REPORT CARD), UMCARES, 2019, (University)

EXPERT/TECHNICAL CONTRIBUTIONS
(Activity), (Organisation), (Role), (From)-(Until), (Level).


  • International Conference on Applied Sciences, Engineering, Technology & Management (ICASETEM-2019), IFERP & Asia Pacific University of Technology & Innovation Malaysia, Committee Member, 2019-2019, (International)
  • Supply of Information on Malaysian Adult Anthropometric for Klang Valley MRT Design, Siemens Malaysia Sdn. Bhd. (93008-X) Infrastructure & Cities (Rail Systems & Mobility), Resource Person, 2013-2013, (National)
  • Curriculum Development of Executive Diploma in Production Management., UMCCED, Consultant, 2013-2013, (University)

EVALUATION ACTIVITIES
(Description), (Evaluation Activity),(Year).


  • PANEL PENILAI BAGI SEMINAR PEMBENTANGAN IJAZAH TINGGI PADA 17.07.2020 DI PUSAT SUKAN & SAINS EKSESAIS, UNIVERSITI MALAYA: PELAJAR LI HAI, Thesis ,  (2020 - 2020)
  • Inderscience Publishers: IER-49618 Barriers and Opportunities to Green Business Practice in the Competitiveness and Sustainable Development Perspective of RMG Industry in Bangladesh"., Article In Journal ,  (2020 - 2020)
  • Ms. Ref. No.: MECH-D-20-00296 Title: Design and Evaluation of the SMApp: A Stiffness Measurement Apparatus for Ankle-Foot Orthoses Mechatronics, Article In Journal ,  (2020 - 2020)
  • CANDIDATURE DEFENSE (DOCTOR OF PHILOSOPHY) - MOHD AAMIR ADEEB BIN ABDUL RAHIM (KVA170053, 17051308/1), Thesis ,  (2020 - 2020)
  • BOARD OF EXAMINERS FOR WEN, BAOHUA (17198922/1 / KVA180047), Thesis ,  (2020 - 2020)
  • Sustainable Business Model and Eco-Innovation from Life Cyc Journal of Cleaner Production, Article In Journal ,  (2019)
  • review of Manuscript ID JST-1259-2018 for the Journal of Science and Technology, Article In Journal ,  (2019)
  • e review of the submission, "STUDI PERTUMBUHAN AUS SISI (Vb) PAHAT KARBIDA BERLAPIS TITANIUM ALUMINIUM NITRIDA (TiAlN) PADA PEMBUBUTAN BASAH BAJA ASTM A 29," for Journal of POLIMESIN., Article In Journal ,  (2019)
  • Internal Examiner for Masters Thesis for Ms Rahmah A Ata'Allah, Thesis ,  (2018 - 2018)
  • Masters Research Candidature Defense Panel for Ms Rodianah Alias, Thesis ,  (2018 - 2018)
  • Internal Examiner for M.Eng Research Project for Mr. Almujtaba Osama, Project ,  (2018 - 2018)
  • External Examiner for Masters Thesis for Mr Saiful Sazwa, Thesis ,  (2018 - 2018)
  • Masters Research Candidature Defense Panel for Ms Noor Najyha Ustati, Thesis ,  (2018 - 2018)
  • Thesis: FORWARD AND BACKWARD FUZZY ECONOMIC ORDER QUANTITY MODELS CONSIDERING LEARNING THEORY. Candidate: Ehsan Shekarian (KHA130125), Thesis ,  (2016 - 2016)
  • Journal Reviewer: Movement, Health & Exercise (MoHE) Journal, Article In Journal ,  (2016 - 2016)
  • Journal of Engineering Science and Technology. A Scopus Index Journal.Published by School of Engineering, Taylor�s University, Article In Journal ,  (2013 - 2013)
  • Proceedings of 2nd International Conference on Ergonomics 2013, Article In Proceeding ,  (2013)
  • Design and rapid Prototyping Modelling of outer skeleton of right hand prosthesis. Arash Darisavi Jorfian (KGC100013), Thesis ,  (2013)
  • Using Overall Equipment effectiveness and Value stream mapping for productivity improvement: A case study in Vietnam By Nguyen Truong Son (KGC100010), Project ,  (2012)
  • COMPARISON OF RAPID PROTOTYPING USING FUSED DEPOSITION MODELLING AND Z CORP 3D MACHINE BY OKEREKE STANLEY ONYEMAUCHE (KGC 070016), Project ,  (2012)
  • A STUDY OF PROCESS FAILURE MODES AND EFFECTS ANALYSIS WITH ERGONOMIC FACTORS BY KHO YAN HAO (KGC 080009), Project ,  (2011)
  • Allina Binti Abdullah, Thesis ,  (2011)
  • FATIGUE TIME PREDICTION FOR UPPERLIMB MUSCLE DURING LIGHT ASSEMBLY TASK BY SANTY (KGA070065), Thesis ,  (2010)

CONTRIBUTION TO SOCIETY
(Contribution To Society), (Level), (Start Date), (End Date).


  • Exco Committee Persatuan Kakitangan Akademik Universiti Malaya, (University), 21/11/2012 until 21/11/2014
  • Special Committee Member International Conference on Ergonomics (ICE2013), (National), 14/05/2012 until 04/09/2013
  • Member Persatuan kakitangan Akademik UM, (University), 04/04/2012 until  
  • Motorola scholarship liason, (University), 01/01/2012 until  

INTELLECTUAL PROPERTY RIGHTS
(Product Name), (Type), (Reference), (Year), (Level).


  • A Dental X-Ray holder, PATENT, PI2010003831,  , (NATIONAL)
  • Compressed Natural Gas Fuel Injection System and Method , PATENT, PI 20062452, 29/05/2006, (NATIONAL)

SUPERVISION


POST GRADUATE STUDENT
(Name of Degree), (Name of Candidates), (Title of Thesis), (Academic Session)

Ongoing
  • Doctoral Degree (PhD), Nurhasyimah Binti Mohamad Ali, DEVELOPMENT OF A NOVEL DESIGN FOR RECOVERY MODEL FOR MALAYSIAN AUTOMOTIVE DESIGN USING A SYSTEMS DYNAMIC APPROACH, 2020/2021
  • Doctoral Degree (PhD), Ding, Huizhe, RESEARCH ON THE RELATIONSHIP BETWEEN JOB FATIGUE AND UNSAFE BEHAVIOR IN A CERTAIN INDUSTRY, 2020/2021
  • Doctoral Degree (PhD), Teuku Firsa, Palm Oil Tree Climbing robot, 2020/2021
  • Doctoral Degree (PhD), Danaraj A/l Chandrasegaran, DEVELOPMENT OF HUMAN FACTORS ENGINEERING STRATEGY AND ITS IMPLEMENTATION FOR MALAYSIAN OIL AND GAS SECTOR; FOCUSED ON PROCESS FACILITIES, 2020/2021
  • Doctoral Degree (PhD), Suman A/l Selvarajoo, COLLABORATIVE MANUFACTURING CHANGE MANAGEMENT APPROACH TO TOOLING AND DIE DEVELOPMENT FOR IMPROVED PRODUCT QUALITY, COST, LIFE CYCLE AND LEAD TIME, 2020/2021
  • Doctoral Degree (PhD), Lydyaty Stephenie, -, 2018/2019
  • Master Degree, S.sukhania, DEVELOPING HUMAN FACTORS DESIGN STANDARD FOR MALAYSIAN OFFSHORE FACILITIES: WELLHEAD PLATFORM, 2016/2017
  • Doctoral Degree (PhD), Ho Fu Haw, DEVELOPMENT OF A MATERIAL EFFICIENCY STRATEGY SELECTION MODEL FOR ELECTRICAL AND ELECTRONIC MANUFACTURING INDUSTRY, 2016/2017
  • Master Degree, Mohd Hafizul Hilmi Bin Mohd Noor, DEVELOPING HUMAN FACTORS DESIGN STANDARD FOR MALAYSIAN OFFSHORE FACILITIES: CENTRAL PROCESSING PLATFORM, 2016/2017
  • Master Degree, S.sukhania, DEVELOPING HUMAN FACTORS DESIGN STANDARD FOR MALAYSIAN OFFSHORE FACILITIES: WELLHEAD PLATFORM, 2016/2017
  • Doctoral Degree (PhD), Danaraj A/l Chandrasegaran, DEVELOPMENT OF HUMAN FACTORS ENGINEERING STRATEGY AND ITS IMPLEMENTATION FOR MALAYSIAN OIL AND GAS SECTOR; FOCUSED ON PROCESS FACILITIES, 2016/2017
  • Master Degree, Mohd Hafizul Hilmi Bin Mohd Noor, DEVELOPING HUMAN FACTORS DESIGN STANDARD FOR MALAYSIAN OFFSHORE FACILITIES: CENTRAL PROCESSING PLATFORM, 2016/2017
  • Doctoral Degree (PhD), Nurhasyimah Binti Mohamad Ali, DEVELOPMENT OF A NOVEL DESIGN FOR RECOVERY MODEL FOR MALAYSIAN AUTOMOTIVE DESIGN USING A SYSTEMS DYNAMIC APPROACH, 2016/2017
  • Doctoral Degree (PhD), Sado Fatai, Novel Assistive Control for Walking-Assist Lower-Extremity Exoskeleton/Orthotic robotic device for Geriatrics and The Physically Impaired, 2016/2017
  • Doctoral Degree (PhD), Nurhasyimah Binti Mohamad Ali, DEVELOPMENT OF A NOVEL DESIGN FOR RECOVERY MODEL FOR MALAYSIAN AUTOMOTIVE DESIGN USING A SYSTEMS DYNAMIC APPROACH, 2015/2016
  • Doctoral Degree (PhD), Sado Fatai, Novel Assistive Control for Walking-Assist Lower-Extremity Exoskeleton/Orthotic robotic device for Geriatrics and The Physically Impaired, 2015/2016
  • Master Degree, Muhammad Firdhaus Bin Che Hassan, Development of material selection for sustainable design, 2011/2012
  • Doctoral Degree (PhD), Ho Fu Haw, -, 2010/2011
  • Master Degree, Itama Prince Erumusele, -

Completed
  • Master Degree, Md Abdul Quader, A HYBRID MULTI-CRITERIA ANALYSIS OF ENERGY EFFICIENT CO2 IRON MAKING TECHNOLOGIES WITH CARBON CAPTURE AND STORAGE, 2013/2014
  • Doctoral Degree (PhD), Zuli'zam Bin Rashid, Ergonomic Design Parameters For Malaysian Car Driver Seating Position, 2011/2012

Terminated
  • Master Degree, Muhammad Zikril Hakim Bin Md. Azizi, DEVELOPMENT OF EMG AND EEG BASED EXOSKELETON CONTROLLER, 2014/2015
FIRST DEGREE/DIPLOMA/PRE-DEGREE
(Course Title), (Academic Session), (No. of Candidates)

Completed
  • Final year Project KCEC/P 4281, 2012/2013, 2
  • Industrial Training, 2012/2013, 3
  • FInal Year Project/KCEC/P4281, 2011/2012, 3
  • FInal Year Project/KCEC/P4281, 2011/2012, 3
  • Final Year Project KCEC/P 4281, 2010/2011, 3

Ongoing
  • KCEC 4281 Final Year Project, 2013/2014, 2

TEACHING
(Course Title), (Academic Session), (No of Student), (No of Contact Hours).


POST GRADUATE
  • ERGONOMICS IN MANUFACTURING, 2018/2019, 10, 42
  • ERGONOMICS IN ENGINEERING AND DESIGN, 2018/2019, 5, 42
  • ERGONOMICS IN ENGINEERING AND DESIGN, 2017/2018, 10, 42
  • ERGONOMICS IN MANUFACTURING, 2011/2012(2), 46, 21
  • ERGONOMICS IN MANUFACTURING, 2011/2012(2), 10, 21
  • COMPUTER AIDED DESIGN, 2009/2010(2), 20, 14
FIRST DEGREE
  • ADVANCED INNOVATION DESIGN APPROACH, 2020/2021(1), 50, 28
  • ADVANCED INNOVATION DESIGN APPROACH, 2019/2020, 25, 14
  • HUMAN FACTORS DESIGN, 2019/2020, 25, 28
  • DESIGNING FOR MANUFACTURING, 2018/2019, 30, 42
  • PRODUCT DEVELOPMENT AND DESIGN, 2018/2019, 1, 42
  • PRODUCT DEVELOPMENT AND DESIGN, 2017/2018, 25, 42
  • INDUSTRIAL PROJECT, 2017/2018, 30, 42
  • COMPUTER AIDED ERGONOMICS, 2017/2018, 30, 42
  • INDUSTRIAL ERGONOMICS, 2017/2018, 30, 42
  • PRODUCT DESIGN, 2016/2017, 30, 42
  • COMPUTER AIDED DESIGN, 2013/2014(1), 34, 3
  • INDUSTRIAL PROJECT I & II, 2012/2013, 60, 14
  • COMPUTER AIDED ERGONOMICS, 2011/2012(2), 26, 24
  • INDUSTRIAL PROJECT I & II, 2011/2012(1,2), 60, 48
  • INDUSTRIAL PROJECT I & II, 2010/2011(1,2), 60, 48
  • PRODUCT DESIGN, 2009/2010(2), 70, 21
  • CONCURRENT ENGINEERING, 2009/2010(1), 1, 42
  • THINKING AND COMMUNICATION SKILLS, 2009/2010(1), 25, 32
  • INDUSTRIAL PROJECT I & II, 2009/2010(1,2), 70, 6
  • DESIGNING FOR MANUFACTURING, 2009/2010(1), 27, 56
  • PRODUCT DESIGN, 2008/2009(1), 100, 28
  • DESIGN FOR MANUFACTURING AND ASSEMBLY, 2007/2008(2), 70, 56
  • PRODUCT DESIGN, 2007/2008(2), 70, 56