PERSONAL DETAIL


DR. SITI NURMAYA BINTI MUSA

Department of Mechanical Engineering
Faculty of Engineering
 
  +603-79676876
  +603-79675317
  nurmaya@um.edu.my
 Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, W.Persekutuan Kuala Lumpur, Malaysia
 
ResearcherID Link
  http://www.researcherid.com/rid/B-9803-2010


BIBLIOMETRIC DATA


 Total Articles in Publication List  9
 Articles With Citation Data  9
 Sum of the Times Cited   334
 Average Citations per Article   37.11
 h-index   4
 Co-authors   Collaboration Network
 This information is generated from http://researcherid.com

ACADEMIC QUALIFICATION
(Qualification), (Institution).



PROFESSIONAL
(Organisation), (Role), (Year), (Level).


  • AMPT2016, Committee Member, 2016 to 2016, (University)
  • Board of Engineers Malaysia, Graduate Engineer, 2016, (National)
  • AMPT2016, Reviewer, 2016 to 2016, (University)
  • AMPT2016, Chairperson For Presentation, 2016 to 2016, (University)

ADMINISTRATIVE DUTIES
(Role), (Level), (Start date),(End Date).


  • Head of Department, Department of Mechanical Engineering, Faculty of Engineering, 01/08/2019 to 31/07/2020
  • Programme Coordinator, Faculty, 01/01/2019 to 31/07/2020
  • Wakil Fakulti bagi Hubungan Kerjsama (NDA, MOU, MOA) Antara UM dan Top Glove, Faculty, 01/10/2018 to 30/09/2021
  • Juri Pertandingan Olimpiad Standard Kebangsaan 2018, National, 04/09/2018 to 06/09/2018
  • Wakil Fakulti bagi Hubungan Kerjsama (NDA, MOU, MOA) Antara UM dan Chongqing University, China, Faculty, 01/07/2018 to 30/06/2021
  • Committee Member for Center of Research in Engineering Education Development (CREED), Faculty, 12/04/2018 to 31/12/2018
  • Pakar Penasihat bagi Pertandingan The 13th International Standards Olympiad, Korea, National, 01/04/2018 to 01/08/2018
  • Panel Penilai Autodesk Malaysia Design Competition, National, 30/01/2018 to 30/01/2018
  • Penasihat Akademik , Faculty, 20/09/2017 to 19/09/2021
  • Ahli Jawatankuasa Pelaksana Makmal di Jabatan Kejuruteraan Mekanik, Faculty, 11/09/2017 to 10/09/2018
  • Pakar Penasihat Pertandingan The 12th International Standards Olympiad Dibawah Jabatan Standards Malaysia , National, 19/07/2017 to 11/08/2017
  • Jawatankuasa Semakan Kurikulum dan Penambahbaikan Program Ijazah Sarjana Muda, Faculty, 10/03/2017 to 09/03/2018
  • AA Coordinator for Mechanical Engineering Department (AVIS Member), Faculty, 01/11/2016 to 31/12/2017 (AA Coordinator for Mechanical Engineering Department (AVIS Member))
  • Head of Publicity and Website, Organizing Committee of the 3rd International Conference on the Sciences and Engineering of Materials (ICoSEM 2017), International, 01/11/2016 to 30/11/2017 (Organizing Committee (Publicity and Website) of the 3rd International Conference on the Sciences and Engineering of Materials (ICoSEM 2017))
  • Ahli Jawatankuasa Penilaian Spesikifasi dan Harga Perolehan Perkhidmatan Melebihi RM50,000.00, Faculty, 07/10/2016 to 31/10/2016 (K/K06/2016/09/42288 - Pemilihan Hotel Untuk Program JSPS-ACP International Symposium 2016)
  • Ahli Jawatankuasa Penilaian Specifikasi Teknikal dan Harga Perolehan Bekalan RM20,000-RM50,000, Faculty, 29/09/2016 to 29/09/2016 (Tiket Penerbangan untuk Peserta Jepun Untuk Program JSPS-ACP International Symposium 2016)
  • Penasihat Akademik , Faculty, 20/09/2016 to 19/09/2020
  • Advisory Committee Member of University of Malaya Sustainable Development Solutions Network (UM SDSN) , University Malaya, 01/07/2015
  • Panel Temuduga untuk Program Pertukaran Pelajar di bawah AOTULE 2015 dan EBA Program 2015 , Faculty, 02/06/2015
  • Ahli Jawatankuasa Pelaksana (Steering Committee) YESPeace Network Malaysia Chapter - Anjuran Bersama UNESCO-MGIEB, SDSN Malaysia Chapter dan Universiti Malaya CHAPTER DAN UNIVERSITI MAIIYA 2015, National, 10/04/2015
  • Resource Person for Engineering Economy, Faculty, 22/01/2015 (Under the office of Deputy Dean (Undergraduate))
  • Industrial Advisor for Zecttron Sdn. Bhd. (UM-Spin-off Company), University Malaya, 01/01/2015 to 31/12/2015
  • Panel Auditor, Audit Kendiri FKUM, Faculty, 29/10/2014 to 29/10/2014 (Audit Susulan persediaan Audit SIRIM November 2014)
  • Ahli Jawatankuasa Kurikulum Program, UMCCed, University Malaya, 04/08/2014
  • Penemuduga Kemasukan ke Program Pengajian Ijazah Dasar, University Malaya, 22/05/2014 to 21/05/2015
  • Ahli Jawatankuasa Kurikulum (Peringkat Jabatan), Jbtn Kejuruteraan Mekanik, Faculty, 19/03/2014 to 31/07/2014
  • Ketua, Pasukan Pembangunan Kurikulum Program, Diploma Eksekutif Pengurusan Teknologi Pembuatan, UMCCed, University Malaya, 04/10/2013
  • Advisory Committee for Industrial Project, Faculty, 27/09/2013 to 26/09/2014
  • Technical Advisory Panel for Industrial Project, Faculty, 27/09/2013 to 26/09/2014
  • Industrial Advisor for Zecttron Sdn. Bhd. (UM-Spin-off Company), University Malaya, 01/04/2013 to 31/03/2014
  • Student Exchange Program (Scandinavia) Advisor, Faculty, 10/11/2012
  • Acting Deputy Dean of Research, Faculty, 15/10/2012 to 17/10/2012

AREAS OF EXPERTISE
(Area).


  • Operations Research / Management Science
  • Production Engineering (Production Economics)
  • Production Engineering (Production and Logistics)
  • Plant Design (Production Layout)
  • Engineering Sciences, Manufacturing and Production Engineering (Manufacturing Management)
  • Work Measurement


RECENT SELECTED PUBLICATIONS
(Publication).


Book

2012
  • Musa, S. Nurmaya, 2012. Supply Chain Risk Management: Identifcation, Evaluation and Mitigation Techniques. Link�ping University, Sweden. ISBN: 978-91-7519-866-8 
Article in Academic Journals

2017
  • Mousavi M, Yap HJ, Musa SN, Tahriri F, Md Dawal SZ (2017) Multi-objective AGV scheduling in an FMS using a hybrid of genetic algorithm and particle swarm optimization. PLoS ONE 12(3): e0169817. doi:10.1371/journal.pone.0169817 (ISI-Indexed)
  • Maryam Mohammadi and S. Nurmaya Musa* (2017). Optimal cycle time for production-inventory systems considering shelf life and backordering. Int. J. Procurement Management, Vol. 10, No. 3, 2017 311 (SCOPUS-Indexed)
  • Fallahpour, A., Wong, K.Y., Olugu, E.U. et al. Int. J. Fuzzy Syst. (2017) A Predictive Integrated Genetic-Based Model for Supplier Evaluation and Selection, 19 (4), 1562-2479. (ISI-Indexed)

2016
  • Fallahpour, A., Olugu, E.U., Musa, S.N. et al. (2016), A hybrid model for supplier selection: integration of AHP and multi expression programming (MEP), Neural Computing and Applications. doi:10.1007/s00521-015-2078-6. (ISI-Cited Publication) (ISI-Indexed)
  • AR Rafieerad, AR Bushroa, B Nasiri-Tabrizi, A Fallahpour, J Vadivelu, SN Musa, SHA Kaboli 2016. GEP-based method to formulate adhesion strength and hardness of Nb PVD coated on Ti-6Al-7Nb aimed at developing mixed oxide nanotubular arrays. J of the Mechanical Behaviour of Biomedical Materials 61: 182 - 196 (ISI-Indexed)

2015
  • Mohammadi, M., Musa, S. N., Bahreininejad, A. 2015. Optimization of economic lot scheduling problem with backordering and shelf-life considerations using calibrated metaheuristic algorithms Applied Mathematics and Computation (ISI-Indexed)
  • Singh, S., Olugu E.U., Musa S.N., Mahat A.B. and Wong K.Y. (2015), Strategy selection for sustainable manufacturing with integrated AHP -VIKOR method under interval-valued fuzzy environment, International Journal of Advanced Manufacturing Technology DOI 10.1007/s00170-015-7553-9 (ISI-Indexed)
  • Raja Ariffin Raja Ghazilla, Novita Sakundarini, Salwa Hanim Abdul-Rashid, Nor Syakirah Ayub, Ezutah Udoncy Olugu, S. Nurmaya Musa, 2015. Drivers and Barriers Analysis for Green Manufacturing Practices in Malaysian SMEs: A Preliminary Findings. Procedia CIRP Vol. 26, 2015, Pages 658 663 (ISI-Indexed)
  • Singh, S., Olugu, E.U., Musa, S.N, Mahat, A.B. (2015), Fuzzy-based sustainability evaluation method for manufacturing SMEs using balanced scorecard framework,Journal of Intelligent Manufacturing (ISI-Indexed)
  • Fallahpour, A, Olugu E.U, Musa S.N, Wong, K.Y, 2015. An Integrated Model for Green Supplier Selection under Fuzzy Environment: Application of Data Envelopment Analysis and Genetic Programming Approach, Neural Computing and Applications. (ISI-Indexed)

2014
  • Fallahpour, A., Olugu, E. U., Moghassem, A., Musa, S. N. 2014. Ranking Alternatives in Rotor-Spun Knitting Process Using Extended VIKOR on Interval Data Journal of Engineered Fibers and Fabrics. (Tier 2, Impact Factor = 0.778) (ISI-Indexed)
  • M Mohammadi, SN Musa, A Bahreininejad. 2014. Optimization of mixed integer nonlinear economic lot scheduling problem with multiple setups and shelf life using metaheuristic algorithms. Advances in Engineering Software 78: 41-51. (ISI-Indexed)
  • Seyed Mohsen Mousavi, Ardeshir Bahreininejad, S Nurmaya Musa, Farazila Yusof. 2014. A Modified Particle Swarm Optimization for solving the integrated location and inventory control problems in a two-echelon supply chain network. Journal of Intelligent Manufacturing 09/2014. (ISI-Indexed)
  • Mousavi, S. M., Niaki, S. T. A., Bahreininejad, A., Musa, S. N. 2014. Multi-Item Multiperiodic Inventory Control Problem with Variable Demand and Discounts: A Particle Swarm Optimization Algorithm Scientific World Journal. (Tier 2, Impact Factor = 1.219) (ISI-Indexed)

2012
  • Tang Ou, Musa, S.N. & Li, J. 2012. Dynamic pricing in the newsvendor problem with yield risks. International Journal of Production Economics 139:127-134. (ISI-Indexed)

2011
  • M.Z. Norhirni, M. Hamdi, S. Nurmaya Musa, L.H. Saw, N.A. Mardi & N. Hilman. 2011. Load and Stress Analysis for the Swash Plate of an Axial Piston Pump/Motor. Journal of Dynamic Systems Measurement and Control 133(6) DOI : 10.1115/1.4004578. (ISI-Indexed)
  • Ou Tang and S. Nurmaya Musa. 2011. Identifying risk issues and research advancements in supply chain risk management. International Journal of Production Economics 133:25-34. (ISI/SCOPUS Indexed Publication)
Proceeding

2016
  • Mohammadi, M., Nurmaya Musa, S., Two calibrated metaheuristic algorithms for solving a multi-plant capacitated lot-sizing problem in an integrated production-distribution network (2016) Proceedings of the International Conference on Industrial Engineering and Operations Management, 8-10 March 2016, pp. 407-418. (SCOPUS-Indexed)

2014
  • S. Singh, E.U. Olugu, S.N. Musa, A.B. Mahat, Proposition of key performance measures for sustainable manufacturing in SMEs , MSME Conclave cum Conference (MSMEC2-2014), Doon University, Dehradun, May 2014. (Non-ISI/Non-SCOPUS)
  • Fallahpour, A., Olugu, E.U., Musa, S.N, Khezrimotlagh, D. and Singh, S., Supplier selection under fuzzy environment: A hybrid model using KAM in DEA , 12th International Conference on Data Envelopment Analysis, Kuala Lumpur, April 15-17, 2014. (Non-ISI/Non-SCOPUS)
  • Marzieh Akhondi and S. Nurmaya Musa, "A Conceptual Design Initiation for Producton-Inventory System Based on Macroeconomics", International Conference of Innovation Driven Supply Chain 2014 (ICIDSC 2014), Kedah, 26th - 28th March 2014. (Non-ISI/Non-SCOPUS)

2011
  • S. Nurmaya Musa, Shuoguo Wei, Ou Tang. 2011. Modelling Risk in Supply Chain Information Flows. Proceeding for International Conference on Production Research (ICPR 21) : Innovation in Product and Production July 31 - August 4, 2011 in Stuttgart, Germany. 

2010
  • S. Nurmaya Musa, Paola Cocca and Ou Tang. 2010. Assessing Risk Adopting Reliability Tools. Proceeding for International Conference on Advances in Production Management Systems (APMS2010). 

2009
  • S. Nurmaya Musa, Paola Cocca and Ou Tang. 2009. Risk Analysis in Managing Supply Chain. Proceeding for 20th International Conference on Production Research (ICPR20). 

2008
  • Ou Tang and S. Nurmaya Musa. 2008. Analyzing Risk Flows in Supply Chains. Proceeding for 15th International Seminar on Inventory Research (ISIR), Budapest. 

AREAS OF RESEARCH
(Project title), (Role), (From)-(Until), (Level), (Source).


  • Enhancing The Digitalisation And Integration Of Processes And Infrastructure In The Vendors' Value Chains, Principal Investigator(PI), 2019 - 2021, RU Geran - Fakulti Program, (National)
  • Centre For Reseach In Industry 4.0 (cr14.0), Consultant, 2019 - 2020, Government Agency, (National)
  • Virtual Reality Based Ergonomics Assessment System Of Drilling And Assembly In Aerospace Manufacturing Industry, Consultant, 2019 - 2021, Others MOHE - Top 100 (IIRG)-IISS, (National)
  • Augmented Reality-Based Programming And Simulation System Of An Industrial Robotic Work Cell, Consultant, 2019 - 2020, RU Geran, (National)
  • Installation And Training On Handling The Methadone Dispenser For Replacement Therapy Treatment (rtg) Program Using Methadone, Consultant, 2019 - 2020, Knowledge Transfer Programme (KTP), (National)
  • Aerospace Process Capability Enhancement Towards I4.0 Adoption, Principal Investigator(PI), 2019 - 2021, Others MOHE - Top 100 (IIRG)-IISS, (National)
  • Elevating Malaysian SMEs Supply Chain Towards Industry 4.0, Principal Investigator(PI), 2018 - 2020, RU Geran - Fakulti Program, (National)
  • Development Of Dynamics Model On The Impact Of Technology Selection And Dynamics Capacity Expansion Within Malaysian Industries, Principal Investigator(PI), 2015 - 2019, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC)), (University)
  • Densification Mechanism And Microstructural Evolution Of 3d Laser Metal Sintering For Rapid Fabrication Method., Consultant, 2015 - 2019, Fundamental Research Grant Scheme (FRGS), (National)
  • Production Economics
  • Systems Dynamic
  • Production and Logistics
  • Material Handling
  • Productivity and Quality Improvement

CONSULTATION PROJECT/CONSULTANCY
(Project title), (Role), (From)-(Until), (Organisation).


  • Development of Data-Centric Aero-Manufacturing Supply Chain, 2018-2018, AMIC
  • Trainer to Panasonic: Introduction to FMEA, 2018-2018, Panasonic
  • Digital Transformation: Automatic double former bypass system, 2018-2018, TOP GLOVE SDN. BHD.
  • Research and Technology (R&T) Cooperation Agreement for 3D Shopfloor Virtualization for Factory Layout Optimisation, 2016, Aerospace Malaysia Innovation Centre

AWARDS AND RECOGNITIONS
(Name of Award), (Awarding Institution), (Year Awarded), (Level).


  • Juri Pertandingan Olimpiad Standard Kebangsaan, Jabatan Standard Malaysia, 2018, (National)
  • Itex 2017 Gold Medal, Internation Invention, Innovation & Technology Exhibition (Itex Malaysia), 2017, (National)
  • Certificate of Excellent Service, University Malaya, 2017, (University)
  • Gold Medal, Malaysia Technology Expo 2016, 2016, (National)
  • Best Track Papers Award, The Sixth International Conference On Industrial Engineering and Operations Management, 2016, (International)
  • 14th International Conference and Exposition On Inventions by Institutions of Higher Learning (Pecipta 2015), The Ministry of Education, 2015, (International)
  • Seoul International Invention Fair 2012: Automatic Thermo-Cyclic Dipping Machine (Atdm), Siif, 2012, (International)
  • Seoul International Invention Fair 2012: Uml-V1 Cnc Lathe Machine, Siif, 2012, (International)
  • Best Paper Award Among The Ysa Recipients, Icpr21, Stuttgart, August 2011., The International Foundation for Production Research (Ifpr) and Fraunhofer Iao, 21st International Conference in Production Research (Icpr21), Stuttgart, August 2011., 2011, (International)
  • Young Scientist Award (Ysa), The International Foundation for Production Research (Ifpr) and Fraunhofer Iao, 21st International Conference in Production Research (Icpr21), Stuttgart, August 2011., 2011, (International)

PRESENTATIONS
(Title), (Event), (Date Presented), (Organiser), (Level).


INVITED SEMINAR
  • Industrial Case Presentation on Tier 1 Supplier, 3rd Mathematics in Industry Study Group Malaysia, MISG-2015 (6 April 2015 - 10 April 2015), 2015-04-06 to 2015-04-10, (National)
INVITED SPEAKER
  • Successful Commercialization of University Research: The Case of ATDM, University of Malaya Malaysian International Chamber of Commerce and Industry Programme on Industry-Academia Collaboration, 2012-12-03 to  , UM-MICCI, (University)
  • Connected Supply Chain: Digitalization of Supply Chain, Talk on Innovation & Technology Development: Connected Supply Chain, Process Automation, Digital Continuity, Composite Manufacturing Technology, 2019-03-28 to 2019-03-28, AMIC and LIMA2019, (International)
  • Asian Perspective on IR4.0, IR4.0 Seminar, 2019-11-05 to 2019-11-08, Department of Mechanical and Industrial Engineering, University of Brescia, Italy, (International)
EVENT ORGANISER
  • Technical Committee, 2nd International Conference on the Science and Engineering Materials (ICoSEM2015) & E|TcINEERIING oF MATERIALI; (ICo|SEM201s), 2015-11-16 to 2015-11-18, (International)
ORAL
  • Governance for Disaster Risk Reduction: Controlling Demand Uncertainty in Supply Chain for Flood Disasters, International Symposium on the Education & Research of the Global Environmental Studies in Asia, 2016-11-13 to 2016-11-15, Kyoto University, (International)
POSTER
  • Basic Information for a Questionnaire on the Values of Stakeholders for Managing the Integrated Basin of Selangor River, Malaysia, JSPS-ASIAN CORE PROGRAM (ACP) 5th COMPREHENSIVE SYMPOSIUM, 2015-11-19 to 2015-11-21, JSPS ASIAN CORE PROGRAM (INTEGRATED WATER MANAGEMENT), (International)
PRESENTER
  • Analysing Risk Flows in Supply Chains, 15th International Symposium on Inventories, 2008-08-22 to 2008-08-26, International Society for Inventory Research, (International)
  • Risk Analysis in Managing Supply Chains, 20th International Conference on Production Research, 2009-08-02 to 2009-08-06, International Foundation for Production Research (IFPR), (International)
  • Supply Chain Risk Analysis using Reliability Engineering Tools , Supply Chain Sustainability, 2009-09-24 to 2009-09-25, InterLink Project, University of Brescia, Italy, (Project Members (Italy, Sweden, Germany))
  • Assessing Risk Adopting Reliability Tools, International Conference on Advances in Production Management Systems (APMS2010), 2010-10-11 to 2010-10-13, IFIP , (International)
  • Modelling Risk in Supply Chain Information Flows, International Conference in Productions Research, 2011-07-31 to 2011-08-04, The International Foundation for Production Research (IFPR) and Fraunhofer IAO, Stuttgart, (International)

EXPERT/TECHNICAL CONTRIBUTIONS
(Activity), (Organisation), (Role), (From)-(Until), (Level).


  • Panel Pembangunan Soalan Olimpiad Kebangsaan, Jabatan Standard Malaysia, Expert Advisor, 2018-2018, (National)
  • Delphi Study Panel, UTM, Expert Advisor, 2017-2018, (National)
  • Education of Standardization, Department of Standards Malaysia, Expert Advisor, 2014-Present, (National)

EVALUATION ACTIVITIES
(Description), (Evaluation Activity),(Year).


  • International Journal of Business and Globalisation, Article In Journal ,  (2017)
  • Thesis on Production-Distribution Planning, Thesis ,  (2016)
  • Designing Powder Deposition Platform for 3D Laser Printing Machine, Thesis ,  (2015)
  • International Journal of Production Economics (IJPE), Article In Journal ,  (2015 - 2015)
  • Master Thesis: Preventive Maintenance Of Cement Grinding Machine In Lao Cement Company, Thesis ,  (2014)
  • Journal of Logistics Management, Article In Journal ,  (2014)
  • Master Thesis: Reliability-Centered Maintenance (RCM) Evaluation in the Industry Application, Case Study: Fertilizer Company, Indonesia, Thesis ,  (2013)
  • PhD Thesis: A Model for Full-blown Implementation of Lean Manufacturing System in Malaysian Automotive Industry for Enhancing Organizational Performance, Thesis ,  (2013)
  • Transportation Research Part E: Logistics and Transportation Review, Article In Journal ,  (2013)
  • Master Thesis: Mixed Production Line Model for Simultaneous Optimization of the Automated Guided Vehicle and Scheduling Using Metaheuristic Algorithms, Thesis ,  (2013)
  • PhD Thesis: An Environmental Friendly Design Methodology for Connector Selection, Thesis ,  (2013)
  • International Journal of Production Economics, Article In Journal ,  (2009)

CONTRIBUTION TO SOCIETY
(Contribution To Society), (Level), (Start Date), (End Date).


  • PROGRAM PEMBERSIHAN PANTAI SECARA SERENTAK PERINGKAT NEGERI SELANGOR TAHUN 2018, (Community), 22/09/2018 until 22/09/2018
  • Al Amin Schools Sustainable Project Judge, (Community), 05/08/2016 until 05/08/2016
  • Ceramah Kerjaya untuk Pelajar Maktab Rendah Sains MARA, Kuala Terengganu, (Community), 08/05/2016 until 08/05/2016
  • Steering Committee and Volunteer for Launching of UNESCO YESPeace Malaysian Chapter, (International), 24/05/2015 until 25/01/2016
  • PARTICIPATE IN THE LEAN PRODUCTION SYSTEM (LPS) ROUND TABLE DIALOGUE 2015 : REVIEW ON JIDOKA CONCEPT, ORGANIZED BY MAI AND MITI, (Government), 30/03/2015 until 31/03/2015

SUPERVISION


POST GRADUATE STUDENT
(Name of Degree), (Name of Candidates), (Title of Thesis), (Academic Session)

Ongoing
  • Doctoral Degree (phd), Hafizah Binti Amminuddin, CHANGE STRATEGY OF THE AUTOMOTIVE INDUSTRY IN MALAYSIA, 2019/2020
  • Doctoral Degree (phd), Sivadas A/l Chandra Sekaran, Virtual Reality-Based Manufacturing Process Automation For Planning And Simulation Of Digital Factory, 2018/2019
  • Doctoral Degree (phd), Mohd Aamir Adeeb Bin Abdul Rahim, CONCURRENT ENGINEERING: DEVELOPING A SYSTEMATIC MATERIAL SELECTION FRAMEWORK WITH HYBRID MCDM METHOD DURING CONCEPTUAL DESIGN STAGE OF A STRUCTURAL BASED PRODUCT, 2018/2019
  • Doctoral Degree (phd), Fajar Kurniawan, Transportation Supply Chain Management Model For Manufacturing Industries, 2018/2019
  • Doctoral Degree (phd), Wen, Baohua, -, 2018/2019
  • Doctoral Degree (phd), Wen, Baohua, -, 2018/2019
  • Doctoral Degree (phd), Hafizah Binti Amminuddin, CHANGE STRATEGY OF THE AUTOMOTIVE INDUSTRY IN MALAYSIA, 2017/2018
  • Doctoral Degree (phd), Mohd Hafis Bin Zakaria, DEVELOPMENT OF AN EXPERT SYSTEM FOR MANUFACTURING PROCESS TECHNOLOGIES SELECTION: A CASE FOR MALAYSIA AUTOMOTIVE INDUSTRY, 2016/2017
  • Doctoral Degree (phd), Pooria Hashemzahi, Supplier Selection, 2015/2016
  • Doctoral Degree (phd), Jenny Ong, DEVELOPING THE DEMATERIALIZATION AND CONVERSION OF WASTE TO RESOURCE MODEL FOR SUPPLY CHAIN INDUSTRY, 2013/2014
  • Doctoral Degree (phd), Seyed Mohsen Mousavi, Formulating and solving the integrated inventory-supply chain and location allocation problems using meta-heuristic algorithms, 2013/2014
  • Doctoral Degree (phd), Maryam Mousavi, A MULTI-OBJECTIVE OPTIMIZATION MODEL FOR SCHEDULING OF AUTOMATED GUIDED VEHICLES IN A FLEXIBLE MANUFACTURING SYSTEM USING A HYBRID EVOLUTIONARY ALGORITHM, 2012/2013

Completed
  • Master Degree, Marzieh Akhondi, The Effect of Macroeconomics on Production-Inventory Model of a Supply Chain, 2013/2014
  • Master Degree, Galuh Yuli Astrini, Risk Evaluation of Fertilizer Plant using Failure Mode and Effect Criticality Analysis (FMECA) and Analytic Hierarchy Process (AHP), 2013/2014
  • Doctoral Degree (phd), Alireza Fallahpour, DEVELOPMENT OF MULTI CRITERIA DECISION MAKING MODEL FOR SUPPLIER SELECTION USING GENE EXPRESSION PROGRAMMING, 2013/2014
  • Doctoral Degree (phd), Maryam Mohammadi, Metaheuristic Algorithms for Solving Lot-sizing and Scheduling Problems in Single and Multi-plant Environments, 2012/2013
  • Doctoral Degree (phd), Sujit Singh, DEVELOPMENT OF SUSTAINABLE MANUFACTURING DECISION MAKING MODELS FOR SMALL AND MEDIUM ENTERPRISES, 2012/2013
FIRST DEGREE/DIPLOMA/PRE-DEGREE
(Course Title), (Academic Session), (No. of Candidates)

Completed
  • Enhancing Production Performance in Automotive Industry, 2018/2019, 3
  • Digital Transformation at Process Industry, 2018/2019, 1
  • Optimization of Production Performance, 2014/2015, 1
  • Quality Improvement, 2014/2015, 1
  • Production-Inventory Analysis, 2014/2015, 1
  • Optimization of Production Performance, 2013/2014, 1
  • Information Integration, 2012/2013, 1
  • Remanufacturing, 2012/2013, 1

TEACHING
(Course Title), (Academic Session), (No of Student), (No of Contact Hours).


POST GRADUATE
  • GLOBAL MANUFACTURING STRATEGIES, 2014/2015(1), 12, 0
  • GLOBAL MANUFACTURING STRATEGIES, 2012/2013(1), 17, 0
FIRST DEGREE
  • ENGINEERING ECONOMIC ANALYSIS, 2018/2019(1), 110, 0
  • MANUFACTURING PLANNING AND CONTROL, 2018/2019(1), 18, 0
  • OPERATIONS MANAGEMENT, 2017/2018(2), 20, 0
  • ENGINEERING ECONOMIC ANALYSIS, 2017/2018(1), 70, 0
  • ENGINEERING ECONOMIC ANALYSIS, 2017/2018(2), 70, 0
  • INTRODUCTION TO INDUSTRIAL ENGINEERING, 2014/2015(1), 5, 0
  • MANUFACTURING PLANNING AND CONTROL, 2014/2015(1), 38, 0
  • OPERATIONS MANAGEMENT, 2014/2015(2), 19, 42
  • MANUFACTURING PLANNING AND CONTROL, 2013/2014(1), 33, 0
  • OPERATIONS MANAGEMENT, 2013/2014(2), 16, 0
  • MANUFACTURING PLANNING AND CONTROL, 2012/2013(1), 28, 0
  • INTRODUCTION TO INDUSTRIAL ENGINEERING, 2012/2013(2), 33, 42