Curriculum Vitae

PROFESSOR IR. DR. NUKMAN BIN YUSOFF

Honorary Professor
  • Department of Mechanical Engineering
    Faculty of Engineering
  • 79676850

BIOGRAPHY


Professor Ir. Dr. Nukman bin Yusoff, being a Professional CAD/CAM Engineer registered under Board of Engineers Malaysia, he has pioneering the Computer Aided Design / Computer Aided Manufacturing (CAD/CAM) field in Malaysia. He acquired his PhD from Loughborough University (field of research: Laser Materials Processing) in 2009 and Master in Engineering Science, MSc. (Mechatronics) from DeMontFort University, Leicester United Kingdom in 1998. He acquired his first degree in CAD/CAM from University of Central England in Birmingham. Since then he has been teaching undergraduate courses in the field of CAD/CAM and Manufacturing and graduate level of teaching in Manufacturing Automation and Control and other field of subjects in Manufacturing. His administration experience in UM shining when he was appointed as Head Of Department of Engineering Design & Manufacture in 2007 till 2009. Since working in UM Nukman was actively doing research in the field of Laser Materials Processing, Human Factors, CAD/CAM, CNC and Manufacturing Process and Management. Being a Principal Researcher in UM he has secured totaling of several millions of grants from internal and international sources which he managed to supervised more than handfull PhD graduates and quite a number of Masters or other post graduates which currently working under his supervision. 

His main research interest is in Green Manufacturing and Human Factors. He successfully helps to improvise the lifecycle of Malaysian long traditional boat used by village people in the remote area such as in Ulu Tembeling Pahang. From the lab research work he manages to optimize the use of vegetable oil as lubricants in machining. He also active in Ergonomics research and consultancies with ORCHID, Ergonomics Research Team in UM. Some of his recent research on Human Factors including Driving behavior of ageing drivers and manual lifting research in Malaysian Industries. Current research going on in Mental workload and Mental Fatigue  among Malaysian service sectors in Malaysia under National Institute of Safety and Health research work. He does a lot of research in laser materials processing using Carbon dioxide lasers, excimer lasers and fibre lasers interacted with metals and non-metals. He authored more than sixty quality ISI and Scopus indexed research articles in Manufacturing Processes and Systems including three scientific books which being referred worldwide.

AREAS OF EXPERTISE


  • OTHER PROCESS TECHNOLOGY AND ENGINEERING
    Green Manufacturing
  • CAD/CAM AND CNC
    CAD/CAM and CNC
  • CONTROL TECHNOLOGY
    Mechatronics
  • MATERIAL PROCESSING TECHNOLOGY
    Laser Materials Processing

ACADEMIC QUALIFICATION


  • PhD (Loughborough,UK) (2009), (Laser Material Processing)
    Loughborough University, UK
  • MSc (Mechatronics)(DMU,UK)(1998), (Mekatronik)
    De Montfort University
  • B.Eng (Hons)(CAD/M)(Birmingham,UK)(1997), (Computer Aided Design and Manufacturer)
    University of Central England in Birmingham
  • Diploma Kejuruteraan Jentera (UTM)(1986), (Kejuruteraan Mekanikal / Jentera)
    Universiti Teknologi Malaysia (UTM)

ADMINISTRATIVE DUTIES


  • Industrial training Co-ordinator
    01 Jul 2009 - present (Department of Engineering Design & Manufacture, Faculty of Engineering)
  • Chairman Departmental Higher Degree committee
    01 Jul 2009 - present (Department of Engineering Design & Manufacture, Faculty of Engineering)
  • Chairman
    01 Mar 2019 - 28 Feb 2022 (University Malaya)
  • Acting Chairman
    01 Feb 2021 - 31 Jan 2022 (University Malaya)
  • JK Ijazah Dasar
    01 Jan 2021 - 06 Aug 2021 (Department of Mechanical Engineering, Faculty of Engineering)
  • AJK PEMILIHAN PEWRMOHONAN GERAN UMRG
    01 Jan 2015 - 31 Dec 2016 (University Malaya)
  • AJK PEMILIHAN PERMOHONAN GERAN UMRG
    01 Jan 2015 - 31 Dec 2016 (University Malaya)
  • Programme Coordinator
    01 Jan 2015 - 31 Dec 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • AJK Semakan Kurikulum Sarjana Pembuatan 2014/2015
    23 Mar 2015 - 31 Dec 2015 (Dean Office, Faculty of Engineering)
  • Head Coordinator
    01 Jan 2015 - 31 Dec 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Coordinator
    06 Apr 2015 - 31 Dec 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Acting Head of Department
    22 Apr 2015 - 30 Apr 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Chief Auditor
    06 May 2014 - 09 Jan 2014 (Department of Biomedical Engineering, Faculty of Engineering)
  • Chairman
    01 Jul 2009 - 30 Jun 2011 (Department of Engineering Design & Manufacture, Faculty of Engineering)
  • Head Coordinator
    01 Jul 2010 - 30 Jun 2011 (Dean Office, Faculty of Engineering)
  • Head of Department
    01 Sep 2008 - 31 Aug 2009 (Department of Engineering Design & Manufacture, Faculty of Engineering)
  • Head of Department
    01 Sep 2007 - 31 Aug 2008 (Department of Engineering Design & Manufacture, Faculty of Engineering)
  • Penyelaras AUN Seednet
    01 Jan 2008 - 29 Aug 2008 (Department of Engineering Design & Manufacture, Faculty of Engineering)
  • Head of Department
    01 Jan 2003 - 31 Mar 2003 (Department of Engineering Design & Manufacture, Faculty of Engineering)
  • Head, Management and Legal Services Unit
    01 Jan 2001 - 28 Mar 2003 (Department of Engineering Design & Manufacture, Faculty of Engineering)
  • Head of Department
    01 Jan 2002 - 31 Dec 2002 (Department of Engineering Design & Manufacture, Faculty of Engineering)
  • Ahli Permuafakatan Telus PT-UM2
    07 Jun 2001 - 10 Jun 2001 (University Malaya)

MEMBERSHIPS


  • BOARD OF ENGINEERS MALAYSIA P117616, PROFESSIONAL ENGINEER
    2023 to 2023 (National)
  • WAKIL PROFESOR BAGI JAWATANKUASA IJAZAH TINGGI , MEMBER
    2021 to 2021 (University)
  • PENGERUSI JAWATANKUASA PEMERIKSA UNTUK PROGRAM IJAZAH TINGGI FAKULTI KEJURUTERAAN, COMMITTEE MEMBER
    2021 to 2021 (University)
  • BOARD OF ENGINEERS MALAYSIA, BOARD MEMBER
    2019 to 2019 (National)

AWARD AND STEWARDSHIP


  • CERTIFICATE OF EXCELLENT SERVICE
    University of Malaya, 2016 (University)
  • EXCELLENCE SERVICE AWARD
    University of Malaya, 2011 (University)
  • Anugerah Perkhidmatan Cemerlang
    University Malaya, 2011 (University)
  • CERTIFICATE OF EXCELLENT SERVICE
    University of Malaya, 2002 (University)
  • Anugerah Perkhidmatan Cemerlang
    University Malaya, 2002 (University)
  • EXCELLENCE SERVICE AWARD
    University of Malaya, 2001 (University)

PUBLICATIONS


Article in Journal
WoS
  1. Javed, Iqra; Md Dawal, Siti Zawiah; Nukman, Yusoff; Ahmad, Ashfaq (2022). Prediction of work productivity outcomes by identifying critical risk factors among garment industry workers, INTERNATIONAL JOURNAL OF OCCUPATIONAL SAFETY AND ERGONOMICS. . doi:10.1080/10803548.2021.1984673
  2. Masoud, Fathi; Sapuan, S. M.; Ariffin, Mohd Khairol Anuar Mohd; Nukman, Y.; Bayraktar, Emin (2022). Experimental Investigation on Dimensional Stability and Cutting Quality in Cutting Process of Sugar Palm Fiber Reinforced Unsaturated Polyester Composites with Laser Beam and Abrasive Water Jet Cutting Technologies, FIBERS AND POLYMERS. 23(11), 3179-3187. doi:10.1007/s12221-022-0165-8
  3. Tanoli, Irfan Khan; Amin, Imran; Junejo, Faraz; Yusoff, Nukman (2022). Systematic Machine Translation of Social Network Data Privacy Policies, APPLIED SCIENCES-BASEL. 12(20). doi:10.3390/app122010499
  4. Abd Rahman, N. I., Dawal, S. Z. M., & Yusoff, N. (2021). Ageing drivers' mental workload in real-time driving tasks based on subjective and objective measures. Journal of Engineering Research, 9(3B), 272-284. doi: 10.36909/jer.v9i3A.9205
  5. Abdelrazek, A. H., Alawi, O. A., Kazi, S. N., & Yusoff, N. (2021). Thermal performance evaluation for alumina coated MWCNTs composite nanofluid in annular passage of various eccentricities. Powder Technology, 391, 114-132. doi: 10.1016/j.powtec.2021.06.005
  6. Ali, M. A. H., Radzak, M. S. A., Mailah, M., Yusoff, N., Abd Razak, B., Ab Karim, M. S., . . . Abdulghafor, R. (2021). A novel inertia moment estimation algorithm collaborated with Active Force Control scheme for wheeled mobile robot control in constrained environments. Expert Systems with Applications, 183, 29. doi: 10.1016/j.eswa.2021.115454
  7. Isa, M. S. M., Moghadasi, K., Ariffin, M. A., Raja, S., bin Muhamad, M. R., Yusof, F., . . . Karim, M. S. B. (2021). Recent research progress in friction stir welding of aluminium and copper dissimilar joint: a review. Journal of Materials Research and Technology-Jmr&T, 15, 2735-2780. doi: 10.1016/j.jmrt.2021.09.037
  8. Masoud, F., Sapuan, S. M., Ariffin, M., Nukman, Y., & Bayraktar, E. (2021). Experimental Analysis of Heat-Affected Zone (HAZ) in Laser Cutting of Sugar Palm Fiber Reinforced Unsaturated Polyester Composites. Polymers, 13(5), 12. doi: 10.3390/polym13050706
  9. Masoud, F., Sapuan, S. M., Ariffin, M., Nukman, Y., & Bayraktar, E. (2021). Experimental Analysis of Kerf Taper Angle in Cutting Process of Sugar Palm Fiber Reinforced Unsaturated Polyester Composites with Laser Beam and Abrasive Water Jet Cutting Technologies. Polymers, 13(15), 21. doi: 10.3390/polym13152543
  10. Abd Rahman, N. I., Dawal, S. Z. M., Yusoff, N. (2020). Driving mental workload and performance of ageing drivers. Transportation Research Part F-Traffic Psychology and Behaviour, 69, 265-285. doi: 10.1016/j.trf.2020.01.019
  11. Abdelrazek, A. H., Choudhury, I. A., Nukman, Y., Kazi, S. N. (2020). Metal cutting lubricants and cutting tools: a review on the performance improvement and sustainability assessment. International Journal of Advanced Manufacturing Technology, 106(9-10), 4221-4245. doi: 10.1007/s00170-019-04890-w
  12. Abdelrazek, A. H., Kazi, S. N., Alawi, O. A., Yusoff, N., Oon, C. S., & Ali, H. M. (2020). Heat transfer and pressure drop investigation through pipe with different shapes using different types of nanofluids. Journal of Thermal Analysis and Calorimetry, 139(3), 1637-1653. doi: 10.1007/s10973-019-08562-5
  13. Masoud, F., Sapuan, S. M., Ariffin, M., Nukman, Y., & Bayraktar, E. (2020). Cutting Processes of Natural Fiber-Reinforced Polymer Composites. Polymers, 12(6), 17. doi: 10.3390/polym12061332
  14. Widia, M., Dawal, S. Z. M., Yusoff, N. (2019). Maximum acceptable frequency of lift for combined manual material handling task in Malaysia. Plos One, 14(5), 13. doi:10.1371/journal.pone.0216918
  15. Abd Rahman, N. I., Dawal, S. Z. M., Yusoff, N., Kamil, N. S. M. (2018). Anthropometric measurements among four Asian countries in designing sitting and standing workstations. Sadhana-Academy Proceedings in Engineering Sciences, 43(1), 9. doi:10.1007/s12046-017-0768-8
  16. Abdelrazek, A. H., Alawi, O. A., Kazi, S. N., Yusoff, N., Chowdhury, Z., Sarhan, A. A. D. (2018). A new approach to evaluate the impact of thermophysical properties of nanofluids on heat transfer and pressure drop. International Communications in Heat and Mass Transfer, 95, 161-170. doi:10.1016/j.icheatmasstransfer.2018.05.002
  17. Abidou, D., Sarhan, A. A. D., Yusoff, N., Ghazali, N. N. N., Awang, M. A. O., Hassan, M. A. (2018). Numerical simulation of metal removal in laser drilling using meshless local Petrov-Galerkin collocation method. Applied Mathematical Modelling, 56, 239-253. doi:10.1016/j.apm.2017.08.032
  18. Hosseini, M., Abdelrazek, A. H., Sadri, R., Mallah, A. R., Kazi, S. N., Chew, B. T., . . . Yusoff, N. (2018). Numerical study of turbulent heat transfer of nanofluids containing eco-friendly treated carbon nanotubes through a concentric annular heat exchanger. International Journal of Heat and Mass Transfer, 127, 403-412. doi:10.1016/j.ijheatmasstransfer.2018.08.040
  19. Chandra, D.; Purbolaksono, A.; Nukman, Y.; Liew, H. L.; Ramesh, S.; Hamdi, M. (2014). Fatigue crack growth of a corner crack in a square prismatic bar under combined cyclic torsion-tension loading, INTERNATIONAL JOURNAL OF FATIGUE. 64, 67-73. doi:10.1016/j.ijfatigue.2014.02.021
  20. Lawal, S. A., Choudhury, I. A., Nukman, Y. (2014). Evaluation of vegetable and mineral oil-in-water emulsion cutting fluids in turning AISI 4340 steel with coated carbide tools, Journal of Cleaner Production. 66, 610-618
  21. Nguyen, H. T., Dawal, S. Z. M., Nukman, Y., Aoyama, H. (2014). A hybrid approach for fuzzy multi-attribute decision making in machine tool selection with consideration of the interactions of attributes, Expert Systems with Applications. 41(6), 3078-3090
  22. Tamrin, K. F., Nukman, Y., Sheikh, N. A., Harizam, M. Z. (2014). Determination of optimum parameters using grey relational analysis for multi-performance characteristics in CO2 laser joining of dissimilar materials, Optics and Lasers in Engineering. 57, 40-47
  23. Lawal, S. A., Choudhury, I. A., Nukman, Y. (2013). A critical assessment of lubrication techniques in machining processes: a case for minimum quantity lubrication using vegetable oil-based lubricant, Journal of Cleaner Production. 41, 210-221
  24. Lawal, S. A., Choudhury, I. A., Nukman, Y. (2013). Developments in the formulation and application of vegetable oil-based metalworking fluids in turning process, International Journal of Advanced Manufacturing Technology. 67(5-8), 1765-1776
  25. Nukman, Y., Hassan, M. A., Harizam, M. Z. (2013). Optimization of Prediction Error in CO2 Laser Cutting process by Taguchi Artificial Neural Network Hybrid with Genetic algorithm, Applied Mathematics Information Sciences. 7(1), 363-370
  26. Tamrin, K. F., Nukman, Y., Zakariyah, S. S. (2013). Laser Lap Joining of Dissimilar Materials: A Review of Factors Affecting Joint Strength, Materials and Manufacturing Processes. 28(8), 857-871
  27. Bhuiyan, M. S. H., Choudhury, I. A., Nukman, Y. (2012). An innovative approach to monitor the chip formation effect on tool state using acoustic emission in turning, International Journal of Machine Tools Manufacture. 58, 19-28
  28. Bhuiyan, M. S. H., Choudhury, I. A., Yusoff, N. (2012). A new approach to investigate tool condition using dummy tool holder and sensor setup, International Journal of Advanced Manufacturing Technology. 61(5-8), 465-479
  29. Dhakshyani, R., Nukman, Y., Azuan, A. N. (2012). FDM models and FEA in dysplastic hip, Rapid Prototyping Journal. 18(3), 215-221
  30. Lawal, S. A., Choudhury, I. A., Nukman, Y. (2012). Application of vegetable oil-based metalworking fluids in machining ferrous metals-A review, International Journal of Machine Tools Manufacture. 52(1), 1-12
  31. Wazed, M. A., Ahmed, S., Nukman, Y. (2011). Application of Taguchi Method to Analyze the Impacts of Commonality in Multistage Production Under Uncertainty, Advanced Science Letters. 42(415-423), Article
  32. Wazed, M. A., Ahmed, S., Nukman, Y. (2011). Application of Taguchi method to analyse the impacts of common process and batch size in multistage production system under uncertain conditions, European Journal of Industrial Engineering. 52(215-231), Article
  33. Dhakshyani, R., Nukman, Y., Abu Osman, N. A., Merican, A. M., George, J. (2010). Rapid prototyping medical models for dysplastic hip orthopaedic surgery, Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture. 224(B5), 769-776
  34. Hambali, A., Sapuan, S. M., Ismail, N., Nukman, Y. (2010). Material selection of polymeric composite automotive bumper beam using analytical hierarchy process, Journal of Central South University of Technology. 17(2), 244-256
  35. Wazed, M. A., Ahmed, S., Nukman, Y. (2010). A REVIEW OF MANUFACTURING RESOURCES PLANNING MODELS UNDER DIFFERENT UNCERTAINTIES: STATE-OF-THE-ART AND FUTURE DIRECTIONS, South African Journal of Industrial Engineering. 21(1), 17-33
  36. Wazed, M. A., Ahmed, S., Nukman, Y. (2010). Analysis of the impacts of common components in multistage production system under uncertain conditions: Application of Taguchi method, Scientific Research and Essays. 5(24), 3814-3825
  37. Wazed, M. A., Ahmed, S., Nukman, Y. (2010). Application of Taguchi method to analyze the impacts of commonalities in multistage production under bottleneck and uncertainty, International Journal of the Physical Sciences. 5(10), 1576-1591
  38. Wazed, M. A., Ahmed, S., Nukman, Y. (2010). Commonality in manufacturing resources planning - issues and models: a review, European Journal of Industrial Engineering. 4(2), 167-188
  39. Wazed, M. A., Ahmed, S., Nukman, Y. (2010). Component and process commonalities in production system under various uncertain factors, African Journal of Business Management. 4(17), 3697-3707
  40. Wazed, M. A., Ahmed, S., Nukman, Y. (2010). Impacts of quality and processing time uncertainties in multistage production system, International Journal of the Physical Sciences. 5(6), 814-825
  41. Wazed, M. A., Ahmed, S., Yusoff, N. (2010). Impacts of common processes in multistage production system under machine breakdown and quality uncertainties, African Journal of Business Management. 4(6), 979-986
  42. Yusuf, K., Nukman, Y., Yusof, T. M., Dawal, S. Z., Yang, H. Q., Mahlia, T. M. I., et al. (2010). Effect of cutting parameters on the surface roughness of titanium alloys using end milling process, Scientific Research and Essays. 5(11), 1284-1293
  43. Hambali, A., Sapuan, S. M., Ismail, N., Nukman, Y. (2009). Application of analytical hierarchy process in the design concept selection of automotive composite bumper beam during the conceptual design stage, Scientific Research and Essays. 4(4), 198-211
  44. Wazed, M. A., Ahmed, S., Yusoff, N. (2009). Impacts of common components on production system in an uncertain environment, Scientific Research and Essays. 4(12), 1505-1517
  45. Sapuan, S. M., Osman, M. R., Nukman, Y. (2006). State of the art of the concurrent engineering technique in the automotive industry, Journal of Engineering Design. 17(2), 143-157
Scopus
  1. Masoud F., Sapuan S.M., Ariffin M.K.A.M., Nukman Y., Bayraktar E. (2022). Experimental Investigation on Dimensional Stability and Cutting Quality in Cutting Process of Sugar Palm Fiber Reinforced Unsaturated Polyester Composites with Laser Beam and Abrasive Water Jet Cutting Technologies, Fibers and Polymers. 23(11), 3179-3187. doi:10.1007/s12221-022-0165-8
  2. Dhakshyani, R., Nukman, Y., Osman, N. A. A., Merican, A. M., George, J. (2010). Rapid prototyping medical models for dysplastic hip orthopaedic surgery, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 224(5), 769-77609544054
  3. Hambali, A., Sapuan, M. S., Ismail, N., Nukman, Y. (2010). Material selection of polymeric composite automotive bumper beam using analytical hierarchy process, Journal of Central South University of Technology (English Edition). 17(2), 244-25610059784
  4. Wazed, M. A., Ahmed, S., Nukman, Y. (2010). A review of manufacturing resources planning models under different uncertainties: State-of-the-art and future directions, South African Journal of Industrial Engineering. 21(1), 17-331012277X
  5. Wazed, M. A., Ahmed, S., Nukman, Y. (2010). Analysis of the impacts of common components in multistage production system under uncertain conditions: Application of Taguchi method, Scientific Research and Essays. 5(24), 3814-382519922248
  6. Wazed, M. A., Ahmed, S., Nukman, Y. (2010). Application of taguchi method to analyze the impacts of commonalities in multistage production under bottleneck and uncertainty, International Journal of Physical Sciences. 5(10), 1576-159119921950
  7. Wazed, M. A., Ahmed, S., Nukman, Y. (2010). Commonality in manufacturing resources planning-issues and models: A review, European Journal of Industrial Engineering. 4(2), 167-18817515254
  8. Wazed, M. A., Ahmed, S., Nukman, Y. (2010). Component and process commonalities in production system under various uncertain factors, African Journal of Business Management. 4(17), 3697-370719938233
  9. Wazed, M. A., Ahmed, S., Nukman, Y. (2010). Impacts of quality and processing time uncertainties in multistage production system, International Journal of Physical Sciences. 5(6), 814-82519921950
  10. Wazed, M. A., Ahmed, S., Yusoff, N. (2010). Impacts of common processes in multistage production system under machine breakdown and quality uncertainties, African Journal of Business Management. 4(6), 979-98619938233
  11. Wazed, M. A., Nukman, Y., Islam, M. T. (2010). Design and fabrication of a cost effective solar air heater for Bangladesh, Applied Energy. 87(10), 3030-303603062619
  12. Yusuf, K., Nukman, Y., Yusof, T. M., Dawal, S. Z., Qin Yang, H., Mahlia, T. M. I., et al. (2010). Effect of cutting parameters on the surface roughness of titanium alloys using end milling process, Scientific Research and Essays. 5(11), 1284-129319922248
  13. Hambali, A., Sapuan, S. M., Ismail, N., Nukman, Y. (2009). Application of analytical hierarchy process (AHP) and sensitivity analysis for selecting the best design concepts during conceptual design stage, Multidiscipline Modeling in Materials and Structures. 5(3), 289-294
  14. Hambali, A., Sapuan, S. M., Ismail, N., Nukman, Y. (2009). Application of analytical hierarchy process in the design concept selection of automotive composite bumper beam during the conceptual design stage, Scientific Research and Essays. 4(4), 198-211
  15. Hambali, A., Sapuan, S. M., Ismail, N., Nukman, Y. (2009). Composite manufacturing process selection using analytical hierarchy process, International Journal of Mechanical and Materials Engineering. 4(1), 49-61
  16. Wazed, M. A., Ahmed, S., Yusoff, N. (2009). Commonality and its measurement in manufacturing resources planning, Journal of Applied Sciences. 9(1), 69-78
  17. Wazed, M. A., Ahmed, S., Yusoff, N. (2009). Impacts of common components on production system in an uncertain environment, Scientific Research and Essays. 4(12), 1505-1517
  18. Wazed, M. A., Ahmed, S., Yusoff, N. (2009). Uncertainty factors in real manufacturing environment, Australian Journal of Basic and Applied Sciences. 3(2), 342-351
  19. Wazed, M. A., Ahmed, S., Yusoff, N. (2008). Commonality models in manufacturing resources planning: State-of-the-art and future directions, European Journal of Scientific Research. 23(3), 421-435
  20. Yusoff, N., Ismail, S. R., Mamat, A., Ahmad-Yazid, A. (2008). Selected Malaysian wood CO2-laser cutting parameters and cut quality, American Journal of Applied Sciences. 5(8), 990-996
  21. Sapuan, S. M., Osman, M. R., Nukman, Y. (2006). State of the art of the concurrent engineering technique in the automotive industry, Journal of Engineering Design. 17(2), 143-157
Others
  1. Ali H. Abdelrazek, Omer A. Alawi, S.N. Kazi, Nukman Yusoff (2021); Thermal performance evaluation for alumina coated MWCNTs composite nanofluid in annular passage of various eccentricities, Powder Technology 391 (2021) 114 132
  2. Abdelrazek, A. H., Kazi, S. N., Alawi, O. A., Yusoff, N., Oon, C. S., & Ali, H. M. Heat transfer and pressure drop investigation through pipe with different shapes using different types of nanofluids. Journal of Thermal Analysis and Calorimetry, 1-17.
  3. Maryam Hosseini, Ali H. Abdelrazek, Rad Sadri, A.R. Mallah, S.N. Kazi, B.T. Chew, Shaifulazuar Rozali, Nukman Yusoff, Numerical study of turbulent heat transfer of nanofluids containing ecofriendly treated carbon nanotubes through a concentric annular heat exchanger. International Journal of Heat and Mass Transfer 127 (2018) 403 412. (ISI-Indexed)
  4. Harizam, MZ (Harizam, M. Z.) ; Tamrin, KF (Tamrin, K. F.) ; Nukman, Y (Nukman, Y.) ; Yusof, F (Yusof, F.) ; Sheikh, NA (Sheikh, N. A.); Effect of Process Parameters on the Laser Joining of Stainless Steel with Three-dimensional (3-D) Printed Polymer Sheet; LASERS IN ENGINEERING, Volume: 41 Issue: 4-6 Pages: 393-408 Published:2018
  5. A.M. SIFULLAH, KHALED I. AHMED, Y. NUKMAN*, M.A. HASSAN & A. HOSSAIN.; Laser Cutting of Square Blanks in Stainless Steel-304 Sheets: HAZ and Thermal Stress Analysis; SAINS MALAYSIANA; Volume: 46 Issue: 5 Pages: 755-762 Published: MAY 2017
  6. Abidou, D., Yusoff, N., Nazri, N., Omar Awang, M.A., Hassan, M.A., Sarhan, A.A.D.; Numerical simulation of metal removal in laser drilling using symmetric smoothed particle hydrodynamics; Precision Engineering, Volume 49, July 2017, Pages 69-77
  7. Ali Pedram, Nukman Bin Yusoff , Olugu Ezutah Udoncy , Abu Bakar Mahat, Payam Pedram, Ayo Babalola; Integrated forward and reverse supply chain: A tire case study, WASTE MANAGEMENT, Volume: 60 Pages: 460-470 Published: FEB 2017
  8. Bhuiyan, MSH; Choudhury, IA; Dahari, M; Nukman, Y; Dawal, SZ 2017. An Investigation into a Gear-Based Knee Joint Designed for Lower Limb Prosthesis. APPLIED BIONICS AND BIOMECHANICS
  9. Diaa Abidoua, Nukman Yusoff, Nik Nazri, M.A. Omar Awang, Mohsen A. Hassan, Ahmed A.D. Sarhan, Numerical simulation of metal removal in laser drilling using radial point interpolation method, Engineering Analysis with Boundary Elements, Volume 77, Pages 89 96, 2017. http://dx.doi.org/10.1016/j.enganabound.2017.01.010
  10. Pedram, A (Pedram, Ali); Pedram, P (Pedram, Payam); Bin Yusoff, N (Bin Yusoff, Nukman); Sorooshian, S (Sorooshian, Shahryar); Development of closed-loop supply chain network in terms of corporate social responsibility; PLOS ONE, Vol.12, Issue.5
  11. Abdul Quader, M. , Ahmed, S., Dawal, S.Z., Nukman, Y.,Present needs, recent progress and future trends of energy-efficient Ultra-Low Carbon Dioxide (CO2) Steelmaking (ULCOS) program ,
  12. Bhuiyan, MSH (Bhuiyan, M. S. H.); Choudhury, IA (Choudhury, I. A.); Dahari, M (Dahari, M.); Nukman, Y (Nukman, Y.), An Investigation into Turning of ASSAB-705 Steel Using Multiple Sensors,MATERIALS AND MANUFACTURING PROCESSES, Volume: 31 Issue: 7 Pages: 896-904 DOI: 10.1080/10426914.2015.1048358 Published: MAY 18 2016
  13. Chandra, D (Chandra, D.)[ 1,2 ] ; Putra, IS (Putra, I. S.)[ 3 ] ; Ariffin, AK (Ariffin, A. K.)[ 4 ] ; Mardi, NA (Mardi, N. A.)[ 1 ] ; Nukman, Y (Nukman, Y.)[ 5 ] ; Purbolaksono, J (Purbolaksono, J.)[ 6 ], Fatigue Growth Analysis of a Surface Crack in a Solid Cylinder under Combined Cyclic Axial-Torsion Loading,
  14. Hossain, A., Hossain, A., Nukman, Y., Hassan, M.A., Harizam, M.Z., Sifullah, A.M., Parandoush, P., A Fuzzy Logic-Based Prediction Model for Kerf Width in Laser Beam Machining, Materials and Manufacturing Processes, ISSN: 10426914 CODEN: MMAPESource Type: Journal Original language: English DOI: 10.1080/10426914.2015.1037901Document Type: Article in Press Publisher: Taylor and Francis Inc.
  15. Sapuan, S.M., Haniffah, W.H., AL-Oqla, F.M. , Nukman, Y., Enamul Hoque, M., Sanyang, M.L.,'Effects of reinforcing elements on the performance of laser transmission welding process in polymer composites: A systematic review', International Journal of Performability Engineering Volume 12, Issue 6, 2016, Pages 535-550
  16. Anamul Hossain, Altab Hossain1, Y. Nukman, M. A. Hassan, M. Z. Harizam, A. M. Sifullah, P. Parandoush,2015, A fuzzy logic based prediction model for kerf width in laser beam machining, Materials and Manufacturing Processes, accepted.
  17. K. F. Tamrin, Y. Nukman & N. A. Sheikh, Laser Spot Welding of Thermoplastic and Ceramic: An Experimental Investigation, Materials and Manufacturing Processes, 30:9, 1138-1145, DOI: 10.1080/10426914.2015.1019108
  18. K. F. Tamrin, Y. Nukman, N. A. Sheikh, Laser Spot 'Welding of Thermoplastic and Ceramic: An Experimental Investigation', Materials and Manufacturing Processes, Page: 1 8, 2015 ISSN: 1042-6914 print=1532-2475 online DOI: 10.1080/10426914.2015.1019108
  19. K.F. Tamrin, Y. Nukman, I.A. Choudhury, S. Shirley, Multiple-objective optimization in precision laser cutting of different thermoplastics,Optics and Lasers in Engineering,2015
  20. Nguyen, HT.; Dawal, SZM. ; Nukman, Y. ; Aoyama, H; Case, K.; An Integrated Approach of Fuzzy Linguistic Preference Based AHP and Fuzzy COPRAS for Machine Tool Evaluation, PLOS ONE, Volume: 10 Issue: 9 Article Number: e0133599 DOI: 10.1371/journal.pone.0133599 Published: SEP 14 2015
  21. Pedram Parandoush, Altab Hossain, Nukman Yusoff, Numerical and intelligent analysis of silicon nitride laser grooving, Int J Adv Manuf Technol, 2015 DOI 10.1007/s00170-015-6957-x
  22. Chandra, Devi; Purbolaksono, Judha; Nukman, Yusoff; et al.,Fatigue growth of a surface crack in a V-shaped notched round bar under cyclic tension, JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A,Volume: 15 Issue: 11 Pages: 873-882 Published: NOV 2014
  23. Nukman Y, Hassan M. A. and Harizam M .Z (2013), Optimization of Prediction Error in CO2 Laser Cutting process by Taguchi Artificial Neural Network Hybrid with Genetic algorithm, Applied Mathematics & Information Sciences, An International Journal. Appl. Math. Inf. Sci. 7, No. 1, 363-370 (2013)
  24. Sabir, O., Ya, TMYST., Ahmad, N., Nukman, Y., A two pressure-velocity approach for immersed boundary methods in three dimensional incompressible flows, 2ND INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING RESEARCH (ICMER 2013) Book Series: IOP Conference Series-Materials Science and Engineering Volume: 50 DOI: 10.1088/1757-899X/50/1/012011 Published: 2013
  25. M. A. Wazed, a, S. Ahmed, b, Y. Nukman, and Nader Ale Ebrahim (2012), Models for Component Commonality in Multistage Production, Applied Mechanics and Materials Vols. 110-116 (2012) pp 258-266
  26. Md. Sayem Hossain Bhuiyan, Imtiaz Ahmed Choudhury and Nukman Yusoff, A new approach to investigate tool condition using dummy tool holder and sensor setup, The International Journal of Advanced Manufacturing Technology, Volume 61, Numbers 5-8 (2012), 465-479, DOI: 10.1007/s00170-011-3722-7
  27. Ratnadurai Dhakshyani, Yusoff Nukman, Abu Osman Noor Azuan, (2012) "FDM models and FEA in dysplastic hip", Rapid Prototyping Journal, Vol. 18 Iss: 3, pp.215 - 221
  28. S.A. Lawal, I.A. Choudhury, Y. Nukman, Developments in the formulation and application of vegetable oil-based metalworking fluids in turning process, Accepted: Int. J Adv Manuf Technol, DOI:10.1007/s00170-012-4607-0, Received: 11 November 2011 / Accepted: 30 October 2012 # Springer-Verlag London 2012
  29. S.A. Lawal, I.A.Choudhury, Y.Nukman,Application of vegetable oil-based metalworking fluids in machining ferrous metals A review, International Journal of Machine Tools & Manufacture, Accepted 3September2011
  30. Dhakshyani, R., Nukman, Y., Abu Osman, N.A., 'Rapid prototyping models for dysplastic hip surgeries in Malaysia'. European Journal of Orthopaedic Surgery and Traumatology, DOI 10.1007/s00590-011-0778-x
  31. Hambali, A., Sapuan, S.M., Rahim, A.S., N. Ismail and Y. Nukman. 2011. Concurrent decisions on design concept and material using analytical hierarchy process at the conceptual design stage. Concurrent Engineering Research and Applications. Impact Factor: 0.959. Volume 19 Issue 2, pp. 111 - 121.
  32. M. A. Wazed, J. U. Ahamed, S. Ahmed, Y. Nukman, T. M. Y. S. Tuan Ya, M. A. R. Sarkar.2011.Enhancement and Prediction of Heat Transfer Rate in Turbulent Flow Through Tube With Perforated Twisted Tape Inserts: A New Correlation.JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME Volume: 133 Issue: 4 041903 (9 pages) Published: 2011
  33. M. A. Wazed, S. Ahmed, Y. Nukman, Mathematical models for process commonality under quality and resources breakdown in multistage production, Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering) ISSN 1673-565X (Print); ISSN 1862-1775 (Online)
  34. R. Dhakshyani, Y. Nukman, N. A. Abu Osman and C. Vijay,Preliminary report: rapid prototyping models for Dysplastic hip surgery, 'Central European Journal of Medicine'. Volume 6, Number 3, 266-270, DOI: 10.2478/s11536-011-0012-6
  35. Wazed, M.A., Ahmed, S., Nukman, Y.,Application of Taguchi method to analyze the impacts of commonality in multistage production under uncertainty, "Advanced Science Letters", 4 (2), pp. 415-423.
  36. Wazed, MA; Ahmed, S; Nukman, Y, 'Application of Taguchi method to analyse the impacts of common process and batch size in multistage production system under uncertain conditions ', EUROPEAN JOURNAL OF INDUSTRIAL ENGINEERING Volume: 5 Issue: 2 Pages: 215-231 Published: 2011
  37. "Impacts of common processes in multistage production system under machine breakdown and quality uncertainties".AFRICAN JOURNAL OF BUSINESS MANAGEMENT, Volume: 4 Issue: 6 Pages: 979-986 Published: JUN 2010
  38. HAMBALI, A; SAPUAN, SM; ISMAIL, N;NUKMAN, Y; "Material selection of polymeric composite automotive bumper beam using analytical hierarchy process",Journal of Central South University of Technology Volume: 17 Issue: 2 Pages: 244-256
  39. I.A. Choudhury, S.W. Gan,Nukman Yusoff,"Experimental Determination of Cutting Temperature and Force When Turning Assab Steel with Coated Carbide Inserts", International Conference on Advances in Materials and Processing Technologies, Date: NOV 02-05, 2008 Manama BAHRAIN Source: ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS 1 AND 2 Volume: 83-86 Pages: 993- 1001 Published: 2010
  40. K R Dhakshyani, Y Nukman, N A Abu Osman, A M Merican and J George (2010). Rapid Prototyping Medical Models for Dysplastic Hip Orthopaedic Surgery . Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture. Vol 224:5, pp769- 776. (DOI 10.1243/09544054JEM1785) (ISI-Cited Publication)
  41. Khairi Yusuf, Y. Nukman, T. M. Yusof, S. Z. Dawal, H. Qin Yang, T. M. I. Mahlia and K. F. Tamrin 2010,Effect of cutting parameters on the surface roughness of titanium alloys using end milling proces. Scientific Research and Essays Vol. 5(11), pp. 1284-1293.
  42. M. A. Wazed, Shamsuddin Ahmed and Nukman Yusoff,"Application of Taguchi Method to Analyze the Impacts of Common Process and Batch Size in Multistage Production System under Uncertain Conditions",European Journal of Industrial Engineering.
  43. M. A. Wazed, Shamsuddin Ahmed and Nukman Yusoff, A review of manufacturing resources planning models under different uncertainties: state-of-the-art and future directions, South African Journal of Industrial Engineering
  44. M. A. Wazed, Shamsuddin Ahmed and Nukman Yusoff, M. A. Wazed, Shamsuddin Ahmed and Nukman Yusoff, Commonality in Manufacturing Resources Planning Issues and Models: A Review, European Journal of Industrial Engineering (EJIE)
  45. Nukman Yusoff, Noor Azuan Abu Osman, Khairi Safwan Othman, Harizam Mohd Zin, "A STUDY ON LASER CUTTING OF TEXTILES", International Congress on Applications of Lasers & Electro Optics (ICALEO), Anaheim Marriott Hotel (Anaheim, CA, USA,September 26-30, 2010, pp1559- 1566.
  46. Wazed, MA; Ahmed, S; Nukman, Y, 'Analysis of the impacts of common components in multistage production system under uncertain conditions: Application of Taguchi method',RESEARCH AND ESSAYS Volume: 5 Issue: 24 Pages: 3814-3825 Published: 2010
  47. Wazed, MA; Ahmed, S; Nukman, Y, 'Application of Taguchi method to analyze the impacts of commonalities in multistage production under bottleneck and uncertainty', INTERNATIONAL JOURNAL OF THE PHYSICAL SCIENCES Volume: 5 Issue: 10 Pages: 1576-1591 Published: 2010
  48. Wazed, MA; Ahmed, S; Nukman, Y, 'Component and process commonalities in production system under various uncertain factors',AFRICAN JOURNAL OF BUSINESS MANAGEMENT Volume: 4 Issue: 17 Pages: 3697-3707 Published: 2010
  49. Wazed, MA; Ahmed, S; Nukman, Y, 'Impacts of quality and processing time uncertainties in multistage production system',INTERNATIONAL JOURNAL OF THE PHYSICAL SCIENCES Volume: 5 Issue: 6 Pages: 814-825 Published: 2010
  50. Wazed, MA; Ahmed, S; Yusoff, N, 'EFFECTS OF COMPONENT COMMONALITIES AND VARIOUS UNCERTAIN FACTORS ON PRODUCTION SYSTEM', PROCEEDINGS OF THE 2010 INTERNATIONAL CONFERENCE ON MECHANICAL, INDUSTRIAL, AND MANUFACTURING TECHNOLOGIES (MIMT 2010) Pages: 47-55 Published: 2010 Conference Title: International Conference on Mechanical, Industrial, and Manufacturing Technologies Conference Date: JAN 22-24, 2010 Conference Location: Sanya, PEOPLES R CHINA
  51. Wazed, MA; Nukman, Y; Islam, MT, 'Design and fabrication of a cost effective solar air heater for Bangladesh', APPLIED ENERGY Volume: 87 Issue: 10 Pages: 3030-3036 Published: 2010
  52. A. Hambali, S.M. Sapuan, N. Ismail and Y. Nukman. 2008. Application of analytical hierarchy process (AHP) and sensitivity analysis for selecting the best design concepts during conceptual design stage. International Journal of Multidiscipline Modelling in Materials and Structures.
  53. A. Hambali, S.M. Sapuan, N. Ismail and Y. Nukman. 2009. Application of analytical hierarchy process in the design concept selection of automotive composite bumper beam during the conceptual design stage. Scientific Research and Essays 4(4): 198-211. (Journal is indexed in Science Citation Index Expanded-Accepted).
  54. Hambali, A., Sapuan, S.M., Ismail, N. and Nukman, Y., 2009. Concurrent decisions on design concept and material using analytical hierarchy process at the conceptual design stage. (Submit to Malaysian Journal of Computer Science).
  55. M. A. Wazed, Shamsuddin Ahmed and Nukman Yusoff, Commonality indices in design and production planning, Journal of Advanced Manufacturing Technology (AMT), 3 (1): 1-20, 2009
  56. M.A. Wazed*, Shamsuddin Ahmed and Nukman Yusoff, Impacts of common components on production system in an uncertain Environment, Scientific Research and Essay, Vol.4 (11), pp. 1505-1517, November 2009 ISSN 1992-2248 2009 Academic Journals
  57. Wazed, M.A., Ahmed, S. and Nukman. Y. (2009), Commonality and its measurement in manufacturing resources planning, Journal of Applied Sciences, Issue, No. 9. Vol. 1, ISSN 1812-5654, pp. 69- 78.
  58. Wazed, MA; Ahmed, S; Yusoff, N, 'Effects of Process Commonalities in Production System under Various Uncertain Factors', 2009 INTERNATIONAL CONFERENCE FOR TECHNICAL POSTGRADUATES (TECHPOS 2009),Pages: 55-61 Published: 2009 Conference Title: International Conference for Technical Postgraduates Conference Date: MAY 14-15, 2009 Conference Location: Kuala Lumpur, MALAYSIA
  59. Wazed, MA; Ahmed, S; Yusoff, N,'Impacts of common components on production system in an uncertain environment', SCIENTIFIC RESEARCH AND ESSAYS Volume: 4 Issue: 12 Pages: 1505-1517 Published: 2009
  60. A. Hambali, S.M. Sapuan, N. Ismail and Y. Nukman. 2008. The important role of concurrent engineering in product development process. Pertanika Journals of Science and Technology 17(1): 9-20.
  61. A. Hambali, S.M. Sapuan, N. Ismail and Y. Nukman. 2008. Use of analytical hierarchy process (AHP) for selecting the best design concept. Jurnal Teknologi (Accepted).
  62. A. Hambali, S.M. Sapuan, N. Ismail and Y. Nukman. 2008. Application of analytical hierarchy process in the design concept selection of automotive composite bumper beam during the conceptual design stage. Journal of Scientific Research and Essays -ISI Science Citation Index-Accepted).
  63. M. A. Wazed, Shamsuddin Ahmed and Nukman Yusoff, Commonality Models in Manufacturing Resources Planning: State-of-the-Art and Future Directions', European Journal of Scientific Research Vol 23, No 3. [ISSN: 1450-216X] (ISI-Cited Publication)
  64. M. A. Wazed, Shamsuddin Ahmed and Nukman Yusoff, Commonality Models in Manufacturing Resources Planning: State-of-the-Art and Future Directions, European Journal of Scientific Research, 23(3): 421- 435, 2008.
  65. M. A. Wazed, Shamsuddin Ahmed and Nukman Yusoff, Commonality Models in Manufacturing Resources Planning: State-of-the-Art and Future Directions, European Journal of Scientific Research, 23(3): 421- 435, 2008.
  66. M. A. Wazed, Shamsuddin Ahmed and Nukman Yusoff, Commonality Models in Manufacturing Resources Planning: State-of-the-Art and Future Directions', European Journal of Scientific Research Vol 23, No 3. [ISSN: 1450-216X]
  67. M. A. Wazed, Shamsuddin Ahmed and Nukman Yusoff, Commonality and Its Measurement in Manufacturing Resources Planning , Journal of Applied Sciences ISSN: 1812-5654 (accepted)
  68. Prasetyo Edi, Nukman Yusoff And Aznijar Ahmad Yazid, Airfoil Design For Flying Wing Uav (Unmanned Aerial Vehicle),WSEAS TRANSACTIONS on APPLIED and THEORETICAL MECHANICS, Issue 9,Volume 3, September 2008,ISSN:1991-8747
  69. Prasetyo Edi, Nukman Yusoff And Aznijar Ahmad Yazid, New Design Concept Of Compound Helicopter,WSEAS TRANSACTIONS on APPLIED and THEORETICAL MECHANICS, Issue 9,Volume 3, September 2008,ISSN:1991-8747
  70. Prasetyo Edi, Nukman Yusoff And Aznijar Ahmad Yazid, The Aerodynamic Configuration Design Of High Subsonic Wing Using Computational Fluid Dynamic (Cfd),WSEAS TRANSACTIONS on APPLIED and THEORETICAL MECHANICS, Issue 9,Volume 3, September 2008,ISSN:1991-8747.
  71. S.M.Sapuan, Y.Nukman and A.R.S.Hanim (2003) Concurrent Engineering Teaching and Research in Malaysian Universities Sudan Engineering Society Journal 49, no. 41 : pp. 19-26
  72. S.Chandrasekariah, Nukman Yusoff (2001) State of the art of CO2 laser cutting in Manufacturing AMSE Periodicals 2001, Modelling, Measurement & Control D-2001 Vol. 22 no 3.
  73. S.M.Sapuan and Y.Nukman, Polymeric-based composite in automobile, Journal of Institution of Engineers, Malaysia (IEM), 62, no. 2, pp.23-29, 2001.
Books
  1. Sapuan, S. M., Nukman, Y., Abu Osman, N. A., & Ilyas, R. A. (Eds.). (2020). Composites in Biomedical Applications. CRC Press. ISBN : 978-0-367-27168-8
  2. Hashmi 2016, 'Comprehensive Materials Finishing', Natural Fiber-Reinforced Composites: Types, Development, Manufacturing Process, and Measurement, Imtiyaz, Nukman.Y, Page.., Elsevier
  3. Mohd Sapuan Salit, Mohammad Jawaid, Nukman Bin Yusoff, M.Enamul Hoque, Manufacturing of Natural Fibre Reinforced Polymer Composites, Springer International Publishing, 2015.ISBN: 9783319079431
  4. N.A Abu Osman, Y Nukman, E.K Moo, '3D Model: An Integrated Approach' Prentice Hall 2010
  5. S.M. Sapuan, M. A.H. Mollah and Y. Nukman, Concurrent Engineering and Product Design and Development, December 2000, Prentice Hall, Petaling Jaya, Selangor, Malaysia ISBN 983-9236-67-9.
Chapter in Books
  1. Hashmi 2016, 'Comprehensive Materials Finishing', Natural Fiber-Reinforced Composites: Types, Development, Manufacturing Process, and Measurement, Imtiyaz, Nukman.Y, Page 204-230, Elsevier
Article in Proceeding
  1. S. Ummu Sakinah, Y. Nukman, M. Ramlee, The Use Of Pls-Sem Analysis To Construct Career Satisfaction Model For Female Engineers, Online 3rd TALENTA Conference on Engineering, Science and Technology, organized by Faculty of Engineering, University of Sumatera Utara, September 28, 2020 September 29, 2020
  2. Awais Farooqi, Nukman Bin Yusoff and Lim Siong Chung, Automatic Pick-and-Place Packaging System with Vacuum Lifter, IOP Conference Series: Materials Science and Engineering, Volume 697, Number 1
  3. Nukman, Y.; Farooqi, Awais; Al-Sultan, Osama; et al. , A Strategic Development of Green Manufacturing Index (GMI) Topology Concerning the Environmental Impacts, Advances in Material and Processing Technologies Conference (AMPT) Location: Kuala Lumpur, MALAYSIA Date: NOV 08-11, 2016 ADVANCES IN MATERIAL & PROCESSING TECHNOLOGIES CONFERENCE Book Series: Procedia Engineering Volume: 184 Pages: 370-380 Published: 2017
  4. Hossain, A (Hossain, Anamul)[ 1 ] ; Nukman, Y (Nukman, Y.)[ 1 ] ; Sifullah, AM (Sifullah, A. M.)[ 1 ], Effect of Process Parameter in Laser Cutting of PMMA Sheet and ANFIS Modelling for Online Control, 2016 3RD INTERNATIONAL CONFERENCE ON MECHANICS AND MECHATRONICS RESEARCH (ICMMR 2016), MATEC Web of Conferences, Volume: 77, Article Number: UNSP 10003
  5. Nukman Y., Bhuiyan S., A study on Advancement in Sensor Based Tool Condition Monitoring in Machining, Chennai
  6. Sabir, O.a , Tuan Ya, T.M.Y.S.b, Ahmad, N.a, Nukman, Y., A two pressure-velocity approach for immersed boundary methods in three dimensional incompressible flows, IOP Conference Series: Materials Science and Engineering, Volume 50, Issue 1, 2013, Article number 012011 2nd International Conference on Mechanical Engineering Research, ICMER 2013; Kuantan, Pahang; Malaysia; 1 July 2013 through 4 July 2013; Code 102589
  7. Hashim, A.M. , Dawal, S.Z.M., Yusoff, N.,Ergonomic evaluation of postural stress in school workshop,Work, Volume 41, Issue SUPPL.1, 2012, Pages 827-831
  8. Selecting a CNC machine tool using the intuitionistic fuzzy TOPSIS approach for FMC, Tho, N.H.a , Dawal, S.Z.M.a , Yusoff, N., Tahriri, F.a , Aoyama, H., Applied Mechanics and Materials,3rd International Conference on Mechanical and Manufacturing Engineering, ICME 2012; ; 20 November 2012 through 21 November 2012; Code 96646,
  9. Rifa't, H.H.a , Nukman, Y., Abu Osman, N.A., Gym, L.K.b, Harizam, M.Z.,Modeling and fabrication of articulate patellar, IFMBE Proceedings Volume 35 IFMBE, 2011, Pages 755-757 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011; Kuala Lumpur; Malaysia; 20 June 2011 through 23 June 2011; Code 85436
  10. 1.M. A. Wazed, Shamsuddin Ahmed and Nukman Yusoff, Multistage Production Models under Common Processes in an Uncertain Environment, Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2009 (APIEMS 2009), Kitakyushu, Japan, 14-16 December, 2009, Pages 1496-1506.
  11. M. A. Wazed, Shamsuddin Ahmed and Nukman Yusoff, Study of Commonality Models in Manufacturing Resources Planning,The 9th Asia Pacific Industrial Engineering & Management Systems Conference and the 11th Asia Pacific Regional Meeting of the International Foundation for Production Research, Nusa Dua, Bali - Indonesia 3 - 5 December 2008
  12. S. Z. Dawal, M. I. Khalil, N.A Ahmad, and N. Yusoff (2007) A Study on Conducive Learning Workstation for Children with Cerebral Palsy In: INTERNATIONAL CONFERENCE ON ERGONOMICS (ICE) 2007 December 3-5, 2007
  13. Ismail J, Nawasra J, Yusoff N, Bryanston-Cross PJ, Timmerman BH,The use of an optically transparent SLA-model to visualize the coolant flow within an IC engine Proc. of the International Conference on Manufacturing and Materials Processing 2006 (ICMM 2006), Kuala Lumpur, Malaysia, 14-15th March 2006
  14. Y.Nukman, J. Wang and S.M.Sapuan (19-22 July 1999) A study on energy optimized control of pneumatic cylinder actuators In: World Engineering Congress, Automation and Robotics Conference Kuala Lumpur, Malaysia. pp. 65-70
  15. Y.Nukman, J.Wang and S.M.Sapuan (19-22 July 1999) A study on time optimized control of pneumatic cylinder actuators In: World Engineering Congress, Mechanical and Manufacturing Engineering Conference Kuala Lumpur, Malaysia. pp. 95-100
Other Publications
  1. Investigating the CO2 laser cutting parameters of MDF wood composite material, Optics & Laser Technology, 2010 - Review
  2. Selection of Polymeric Based Material Composite for Fibreglass Boat Components using Expert System, Eighth International Conference on Composite Science and Technology - Review
  3. "Anthropometric study among adults of different ethnicity in Malaysia", International Journal of Physical Sciences (IJPS) - Review
  4. Automated people counting by using low-resolution infrared and visual cameras. Elsevier- Journal of the International Measurement Confederation. - Review

RESEARCH INTEREST


  • Laser Materials Processing (Laser machining)
  • Ergonomics/ Human Factors (Human Factors)
  • Green Manufacturing (Green Manufacturing)
  • Manufacturing Process (Nontraditional machining)

RESEARCH PROJECT


National
  1. 2018 - 2021, RU Geran - Fakulti Program
    Textured Novel Cutting Tool For Sustainable Machining ( Co-Researcher)
  2. 2021 - 2023, Fundamental Research Grant Scheme (FRGS)
    Investigation On Physical And Psychosocial Risk Factors With The Fatigue Level Among Male Courier Service Workers After Sudden Influx In Delivery Demands Due To Covid19 Pandemic ( Co-Researcher)
  3. 2014 - 2016, Fundamental Research Grant Scheme (FRGS)
    Laser welding of aluminium alloy and carbon composites for passenger cars chasis to improve fuel efficiency. ( Principal Investigator(PI))
  4. 2012 - 2015, High Impact Research (HIR)
    RECONSTRUCTION OF ARTIFICIAL PROSTHESIS LIMBS ( Consultant)
  5. 2013 - 2015, Geran Penyelidikan Universiti Malaya (UMRG)
    Design and development of hybrid model FEM-SPH simulation model for laser cutting process ( Principal Investigator(PI))
  6. 2009 - 2012, Geran Penyelidikan Universiti Malaya (UMRG)
    Experimental Design and Analysis of Fuselage Structure of Jet Aircraft ( Consultant)
  7. 2009 - 2010, Geran Penyelidikan Universiti Malaya (UMRG)
    Conceptual Design of Experimental Jet Aircraft for Civil Aviation ( Consultant)
  8. 2008
    Laser cutting of metals and non metals
  9. 2002 - 2003, Short Term Research Fund (Vote F)(PJP)
    Conflict Between CAE and Manual Method in Developing Dies ( Consultant)
  10. 1999 - 2001, IRPA
    The Ergonomics problems and Solutions for Malaysia Industries. ( Consultant)
Private
  1. 2022 - 2024, Private Funding
    An Autonomous Vehicle For Railway Track Inspection, Repair & Monitoring System ( Principal Investigator(PI))
  2. 2020 - 2024, YTL SDN BHD
    UM-YTL-KTMB INDUSTRIAL COLLABORATION PROGRAM FOR NATIONAL RAIL CENTRE OF EXCELLENT - An Autonomous Vehicle for Railway Track Inspection, Repair & Monitoring System ( Principal Investigator(PI))
  3. 2020 - 2024, YTL CORPORATION BERHAD
    UM-NRCOE, MOT : An Autonomous Vehicle for Railway Track Inspection, Repair & Monitoring System, Universiti Islam Antarabangsa (UIAM) ( Co-Researcher)
International
  1. 2012 - 2015, JICA-AUNSeednet
    Fuzzy Multi-Criteria Analysis for Machine Tool Selection and Optimal Machine Loading in Flexible Manufacturing Cell ( Principal Investigator(PI))
  2. 2012 - 2014, JICA-AUNSeednet
    Production scheduling of Heuristic for management FIFO system. ( Principal Investigator(PI))
University
  1. 2008 - 2010, ScienceFund
    Rapid Prototyping Using Metal Casting Technology ( Principal Investigator(PI))
  2. 2008 - 2010, Fundamental Research Grant Scheme (FRGS)
    Design and Implementation of competitive and sustainable model for manufacturing resources planning system for SMEs in Malaysia ( Consultant)
  3. 2009, Postgraduate Research Grant(PPP)
    Calibration of CNC Machine Centre using Laser Inferometer ( Principal Investigator(PI))
  4. 2007 - 2008, JICA AUNseednet
    Development of Mold and Die Add on tool for IRONCAD ( Principal Investigator(PI))
  5. 2008 - 2008, Short Term Research Fund (Vote F)(PJP)
    Computerised Manufacturing Resources Planning models and solutions for multiple end-item under probabilistic decision rules ( Consultant)
  6. 2000 - 2001, PG Vot-F
    Laser Cutting for Thin Sheet Metals ( Principal Investigator(PI))

CONSULTANCY PROJECT


  • Research On Mental Workload and Mental Fatigue in Service Sectors in Malaysia (Extended Due to Pendemic), NIOSH, Professional Consultant (Ir., Ar., Sr., Ts., dsbnya)
    01 Sep 2020 - 01 Sep 2021 (National)
  • Eco-Greenergy Wind-Solar Light Pole - Dbkl Bisycle Track, DBKL
    01 May 2015 - 01 May 2018 (National)
  • Dbkl Bicycle Track Project (from Dataran Merdeka to Midvalley), DBKL
    01 Jan 2015 - 01 Jan 2017 (National)
  • Feasibility Study (Fs) On The Establishment of The National Product Safety Testing Laboratory (Npstl), DEPARTMENT OF STANDARDS MALAYSIA
    01 Feb 2011 - 01 Feb 2012 (National)
  • Design & Rapid Prototype Modeling of Orthopedics Jigs., PPUM
    01 Jun 2011 - 01 Jun 2011 (National)
  • Cad/Cam & Cnc Training for Arab Trainers, SAUDI ARABIA MILITARY ENGINEERS
    01 Jan 2011 - 01 Jan 2011 (International)
  • National Occupational Skill Standards (Noss) Development for Prosthetics Technologist Level 4 & 5, Jabatan Pembangunan Kemahiran.
    01 Sep 2010 - 01 Sep 2010 (National)
  • National Occupational Skill Standards (Noss) Development for Orthotics Technologist Level 4 & 5, Jabatan Pembangunan Kemahiran.
    01 Sep 2010 - 01 Sep 2010 (National)
  • National Occupational Skill Standards (Noss) Development for Orthotics Technician Level 3, Jabatan Pembangunan Kemahiran.
    01 Sep 2010 - 01 Sep 2010 (National)
  • National Occupational Skill Standards (Noss) Development for Prosthetics Technician Level 3, Skill Development Department (JPK), Ministry of Human Resource
    01 Nov 2009 - 01 Nov 2009 (National)
  • Development of National Occupational Skill Standard (Noss) for Industrial Product Design Course L3,L4 and L5., Jabatan Pembangunan Kemahiran, Kementerian Sumber Manusia
    01 Nov 2009 - 01 Nov 2009 (National)
  • Cnc Part Programming and Machining Training 23-26 June 2008, Universities & training institutions
    01 Nov 2008 - 01 Nov 2009 (University)
  • Jawatankuasa Penarafan Kursus Sijil Kejuruteraan Mekanikal Pembuatan Ikm, Jabatan Perkhidmatan Awam & MARA
    01 Nov 2008 - 01 Nov 2009 (National)
  • Jawatankuasa Penarafan Jpa Kursus Sijil Teknologi Mekanikal Pembuatan Ikm, JPA & MARA
    01 Nov 2008 - 01 Nov 2009 (National)
  • UM-Mts 5-Axis Cnc Milling Programming Traning 18-22 May 2009, UTHM, UPM, JTM
    01 Nov 2009 - 01 Nov 2009 (National)
  • Facilities Maintenance Management for Education Administrators, Ministry of Higher Education
    01 Nov 2009 - 01 Nov 2009 (National)
  • Remodelling of Islamic Exhibition Items by National Science Centre, Intellifix
    01 Nov 2007 - 01 Nov 2008 (National)
  • Jawatan Kuasa Penarafan Kursus Diploma Tool & Die, JPA & IKTBN
    01 Nov 2002 - 01 Nov 2002 (National)
  • Curriculum Development (Level 4 & 5) Btech Electrical & Electronics, British Malaysian Institute (BMI)
    01 Nov 2002 - 01 Nov 2002 (National)
  • Curriculum and Teaching Material Development of Cad/Cam Cnc Course, TPM Academy
    01 Nov 2002 - 01 Nov 2002 (University)
  • Cad/Cam & Cnc Training, Institut Teknologi Pertama
    01 Nov 2002 - 01 Nov 2002 (University)
  • Cad/Cam Training for University Lecturers (Pakistan), University & Polytechnic Pakistan + UMCCED
    01 Nov 2001 - 01 Nov 2001 (International)
  • Curriculum Development Committee for Mechatronics, Tool & Die Bachelor of Technology, German Malaysia Institute (GMI)
    01 Nov 2000 - 01 Nov 2000 (National)
  • Cnc Part Program Development for Complex Drilling Job, JM Technology
    01 Nov 1999 - 01 Nov 1999 (University)

PAPER PRESENTED


PLENARY SPEAKER
  1. A STUDY ON ADVANCEMENT IN SENSOR BASED TOOL CONDITION MONITORING IN MACHINING, INTERNATIONAL CONFERENCE ON MECHANICAL, MATERIALS AND MANUFACTURING SYSTEMS (ICMMMS 16), Department of Mechanical Engineering, SRI SAI RAM ENGINEERING COLLEGE Sai Leo Nagar, West Tambaram, Chennai, India (International) (24 Feb 2016 - 25 Feb 2016)
  2. IRONCAD in Education, IRONCAD in Education 2013 , Intellifix  (International) (05 Sep 2013)
  3. CNC Machine in higher education- a testimonial, CNC workshop at GMI, MTS Didactic (National) (03 Jul 2013)
PRESENTER
  1. Effect of Process Parameter in Laser Cutting of PMMA sheet and ANFIS modelling for online control, 2016 The 5th International Conference on Manufacturing Engineering and Process,"ICMEP Turkey 2016", Firat Universitesy Turkey (International) (25 May 2016 - 27 May 2016)
  2. Modeling and Fabrication of Articulate Patellar, BioMed2011, the 5th Kuala Lumpur International Conference on Biomedical Engineering, 20th to the 23rd of June 2011 at Berjaya Times Square Hotel, located in Kuala Lumpur, Department of Biomedical Engineering, Faculty of Engineering, University Malaya (International) (20 Jun 2011 - 23 Jun 2011)
  3. A STUDY ON LASER CUTTING OF TEXTILES, 29th International Congress on Applications of Lasers & electro-optics, Laser Institute of America (LIA) (International) (27 Sep 2010 - 01 Oct 2010)

ACADEMIC/PROF. SERVICES


Evaluation
  1. (2023) External Assessor for B.Eng.Manufacturing, IIUM, National, (External Assessor)
  2. (2022) Pelantikan Sebagai Ahli Panel Pemeriksa Luar (Fksh) Unisel, National, (External Examiner)
  3. (2021) Penilaian Bagi Permohonan Pusat Kecemerlangan Pendidikan Tinggi (Hicoe) 2021, National, (Reviewer)
  4. (2021) Penilaian Permohonan Overseas Research Grant 2021 Tajaan Nippon Sheet Glass Foundation for Materials Science and Engineering (Nsg Foundation), International, (Reviewer)
  5. (2021) Penilai Luar Kenaikan Pangkat Vk07 Utem, University, (External Assessor)
  6. (2021) Name: Ahmad Kh M F Alnuweem (G1519511) Programme: Doctor of Philosophy (P_eng) Kulliyyah: Kulliyyah of Engineering, University, (External Examiner)
  7. (2021) Penilai Luar Kenaikan Pangkat, National, (External Examiner)
  8. (2021) Panel Penilai Dalaman Bagi Sesi Pembentangan Permohonan Lrgs-JSU 2021, University, (Reviewer)
  9. (2021) Chairman for 15 Candidates of Phd and Msc Viva Voce, University, (Internal Examiner)
  10. (2019) PENILAI LUAR PROGRAM PASCASISWAZAH UITM PHD , (External Examiner)
  11. (2019) EXTERNAL EVALUATOR YAYASAN UTP FUNDAMENTAL RESEARCH GRANT , (External Examiner)
  12. (2018) Pemeriksa Luar Penilai Program SARJANA KEJURUTERAAN PENGURUSAN EM704 UITM , (External Examiner)
  13. (2016) Tesis PhD Nurhayati Mohd Nur, The relationship between work productivity performance and acute responses variation at different levels of production standard time, (Internal Examiner)
  14. (2016) Houriyeh marashi PhD thesis "Enhancing EDM performance through employment of titanium nanopowder mixed dielectric and severe plastic deformation of electrode", (Internal Examiner)
  15. (2016) Panel Penilai Jemputan Skim Geran FRGS Fasa 1/2016 KPT, (Reviewer)
  16. (2016) Computer Workstation for students with cerebral palsy (implementation on table and split keyboard) Student: Nor Anisah binti Ahmad, (Internal Examiner)
  17. (2016) Panel Penilai dan Penasihat Pusat Komuniti dan Kelestarian UMCares, (Advisory Committee)
  18. (2015) UNIVERSITY OF MALAYA DOCTORAL THESIS EXAMINATION, Nurul Shahida Bt Mohd Shalahim (KHA100108), 'THE RELATIONSHIP BETWEEN ANTHROPOMETRY AND HAND GRIP STRENGTH AMONG OLDER MALAYSIAN PEOPLE' , (Internal Examiner)
  19. (2015) UNIVERSITY PENDIDIKAN SULTAN IDRIS DOCTORAL THESIS EXAMINATION, Khairul Fikri Tamrin (p20132002428), 'PARTICLE IMAGE IDENTIFICATION, CLASSIFICATION AND CORRECTION TECHNIQUES IN DIGITAL HOLOGRAPHIC MICROSCOPY. , (External Examiner)
  20. (2015) UNIVERSITY OF MALAYA DOCTORAL THESIS EXAMINATION, Mohd Azlis Sani Md Jalil (KHA080044), 'DEVELOPMENT OF AN INTEGRATED MALAYSIAN TRAIN DRIVER PERFORMANCE MODEL'. , (Internal Examiner)
  21. (2015) Ph.D. thesis: "Navigational Strategies for Control of Underwater Robot using Ai based Algorithms" submitted by Ms. Shubhasri Kundu, NATIONAL INSTITUTE OF TECHNOLOGY ROURKELA, INDIA, (External Examiner)
  22. (2015) Name of Student : Raju Ahamed Matric No. : G1330635 Program of Study : MSc. in Mechatronic Engineering (MSMCT) By Research (40 credit hours) Department : Department of Mechatronic Engineering Title of Thesis : Design of Energy Generated Magneto-Rheological Damper for Vehicle Suspension Systems , (External Examiner)
  23. (2014) PhD Thesis Examination Report - Seyed Reza Besharati (KHA110013) Title of thesis: "DESIGN AND MANUFACTURING OF A NEW CNC GANTRY MACHINE WITH DOUBLE MOTION FEED DRIVE SYSTEM ", (Internal Examiner)
  24. (2014) Evaluator for Promotion to Associate Professor for The Academic Council of Qassim University, Saudi Arabia, (Reviewer)
  25. (2014) NURHAYATI MOHD NUR (KHA110015) PhD Thesis TITLE: THE RELATIONSHIP BETWEEN WORK PRODUCTIVITY PERFORMANCE AND ACUTE RESPONSES VARIATION AT DIFFERENT LEVELS OF PRODUCTION STANDARD TIME, (Internal Examiner)
  26. (2010) Optics & Laser Technology Journal. Manuscript title: Investigating the CO2 laser cutting parameters of MDF wood composite material, (Reviewer)
  27. Development of a software for impeller design and manufacture -Muhammad Agung Bramantya
  28. A study on the performance of an XY table for laser spot welding
  29. Development of an Open Architecture Milling Machine Towards Prototyping Purpose
  30. Integrated manufacturing systems toward organizational excellence -Vivien
  31. Ultrasonic-based Navigation for a Mobile Robot- Zaki Saleh
  32. Optimisation of control parameters in injection flushing type on stainles steel workpiece with copper tools -Reza Zalani
  33. The effect of vibration on removal rate and tool wear rate for small hole electrical discharge drilling -Tutik
  34. Performance evaluation of powder polymer materials in powder coating optimization process - Raw Chee Meng
  35. Vibration analysis of defected ball bearing using finite element model simulation. By: Purwo Kadarno , (Internal Examiner)
  36. The optimization of Silicon Carbide (SiC) powder suspended dielectric on efficiency of electrical discharge machining of Inconel 625 by using Response Surface Methodology (RSM).by Haikal, (Internal Examiner)
  37. Application of Taguchi Method in Bending of Sheet Metal for Industrial Applications Student: Vahid Ghomi , (Internal Examiner)
  38. Hardware integration and ground-station for a small UAV helicopter Edited: Hardware integration and software development for a small UAV helicopter Student: Mohammad Ebrahim Al-Ahdal , (Internal Examiner)
  39. AN ONBOARD SYSTEM AND A HARDWAREIN-THE-LOOP SIMULATION SYSTEM FOR A SMALL SCALE UAV (HELICOPTER) Student: Tang Yirui , (Internal Examiner)
  40. The Application of Work Study on a Manual Assembly Operation. Student: Tan Say Chin , (Internal Examiner)
  41. A THREE DIMENSIONAL FINITE ELEMENT ANALYSIS OF KNEE JOINT DURING GAIT Student: NORMAHIRA MAMAT, (Internal Examiner)
  42. Development of new methodology for optimum facility layout in small medium enterprise using location model and simulation technique. Student: Khusna Dwijayanti, (Internal Examiner)
Contribution to external organisation
  1. (2023) External Assessor for B.Eng Manufacturing IIUM, National, (Expert Advisor)
  2. (2019) SCIENTIFIC COMMITTEE International Conference on Ergonomics & 2nd International Conference on Industrial Engineering (ICE & ICIE 2019), International Conference on Ergonomics & 2nd International Conference on Industrial Engineering (ICE & ICIE 2019)
  3. (2016) Editor for AMPT conference 2016, AMPT Org
  4. (2014) BENGKEL PEMURNIAN BUKU COT POLITEKNIK, Politeknik Kementerian Pelajaran Malaysia
  5. (2008) AHLI JAWATANKUASA PENILAI JPA BAGI PENILAIAN PENGIKTIRAFAN KELAYAKAN-KELAYAKAN SIJIL KEJURUTERAAN DAN SIJIL TEKNOLOGI DARI INSTITUT KEMAHIRAN MARA (IKM), JABATAN PERKHIDMATAN AWAM & MARA
  6. (2001) SIRIM Screw Thread Standard Committee, SIRIM
Mentoring
  1. (2022) Ahli Jawatankuasa Objektif Pendidikan Program/ Programme Educational Objectives (Peo) Fakulti Kejuruteraan, University, (Mentor)

SUPERVISION


Postgraduate Student
PhD/ Doctoral
  1. (2015) INVESTIGATION ON AGING DRIVERS? RESPONSES AT DIFFERENT LEVELS OF DRIVING TASK, NURUL IZZAH BINTI ABD RAHMAN
  2. (2015) EXPERIMENTAL AND NUMERICAL STUDY OF HEAT TRANSFER AND FRICTION LOSS OF NANO FLUIDS IN A CLOSED CONDUIT FLOW, ALI HASSAN ABDELRAZEK ELSAYED
  3. (2013) MATERIAL PROCESSING TECHNOLOGY (LASER MATERIALS PROCESSING), HARIZAM BIN MOHD ZIN
  4. (2013) DEVELOPMENT OF A MODEL FOR A SUSTAINABLE TAKE BACK SCHEME OF WEEE MANAGEMENT, NUR AZYYAH BINTI ABDUL JAMIL
  5. (2013) DESIGN AND DEVELOPMENT OF NUMERICAL AND ANALYTICAL METHODS, DIAA ABDELMONEM MAHMOUD ABIDOU
  6. (2011) ERGONOMIC ASSESSMENT SYSTEM FOR ASSEMBLY TASK IN MANUFACTURING INDUSTRY, MIRTA WIDIA
  7. (2010) Structural Analysis and Optimization of Composite Fuselage, DEVI CHANDRA
  8. (2010) FATIGUE GROWTH ANALYSES OF A PART-THROUGH CRACK IN A SOLID BAR UNDER COMBINED CYCLIC TENSION-TORSION LOADING, DEVI CHANDRA
  9. (2010) EFFECT OF VEGETABLE AND MINERAL OIL-IN-WATER EMULSION CUTTING FLUIDS IN TURNING AISI 4340 STEEL WITH COATED CARBIDE TOOLS, SUNDAY ALBERT LAWAL
  10. (2009) Computer Aided material selection for component made from composite using Analytical Hierarchy Process, Hambali Arep (M0100103)
  11. (2008) Investigation of cutting parameters of alloy steels for mold and die manufacturing using high-speed multi cutters end milling incorporating cryogenic cooling, AZNIJAR BIN AHMAD YAZID
  12. (2008) Development and application of micro mould for medical, AZUDDIN BIN MAMAT
  13. (2008) DESIGN AND DEVELOPMENT OF A VERTICAL MICRO INJECTION MOLDING MACHINE WITH FLOW VISUALIZATION CAPABILITY, AZUDDIN BIN MAMAT
  14. (2007) RESOURCES REQUIREMENT PLANNING MODELS UNDER UNCERTAINTY AND COMMONALITY FOR MULTI-STAGE AND MULTI-PRODUCT MANUFACTURING, MD. ABDUL WAZED
  15. (2007) Manufacturing resource Planning, Md. Abdul Wazed (University of Malaya (UM))
  16. (2007) Evaluation of Hip Joint Surgery Using Rapid Prototyping, R.Dhakshyani (University of Malaya (UM))
Master
  1. (2015) USE OF BORIC ACID POWDER AIDED VEGETABLE OIL FOR ENVIRONMENTALLY BENIGN MINIMUM QUANTITY LUBRICATION IN MACHINING INCONEL 718, MUHAMMAD AIMAN BIN MAHADI
  2. (2014) FUZZY PREDICTION MODEL FOR KERF WIDTH IN LASER CUTTING OF POLYMETHYLMETHACRYLATE (PMMA) SHEET, K. M. ANAMUL HOSSAIN
  3. (2013) STUDYING THE FUSION CUTTING MECHANISM IN CO2 LASER BLANKING OF STAINLESS STEEL-304 SQUARE SAMPLES, ABU MOHAMMED SIFULLAH
  4. (2011) OPTIMIZATION OF ELECTRICAL DISCHARGE MACHINING PROCESS ON ALUMINIUM WORK PIECE WITH COPPER TOOLS, MEHRAN TAMJIDY
  5. (2011) AN INVESTIGATION OF CO2 LASER CUT QUALITY OF PLASTIC-LEATHER, MOHAMMAD MOHAMMAD ZADEH
  6. (2010) THE APPLICATION OF GROUP TECHNOLOGY IN CONCURRENT ENGINEERING, BAHAREH ESHRAGH
  7. (2010) PRODUCTIVITY IMPROVEMENT IN CAMBODIA BEVERAGE COMPANY USING OVERALL EQUIPMENT EFFECTIVENESS METRICS, Suon Makara
  8. (2010) PRODUCTIVITY IMPROVEMENT IN CAMBODIA BEVERAGE COMPANY USING OVERALL EQUIPMENT EFFECTIVENESS MATRICS, SUON MAKARA
  9. (2010) PLANNING AND CONTROL MANAGEMENT OF PROJECT ORIENTED-MANUFACTURING IN BATCH PRODUCTION, MAJID ZOMORRODI
  10. (2010) OPTIMISATION OF LASER CUTTING PARAMETERS OF OIL PALM WOOD, HARIZAM BIN MOHD ZIN
  11. (2010) Laser cutting of Oil Palm Wood, HARIZAM BIN MOHD ZIN
  12. (2010) INVESTIGATION OF THE CO2 LASER CUTTING OF GLASS WOVEN FABRIC COMPOSITE MATERIAL, KHASHAYAR DANESH NAROOEI
  13. (2010) Calibration and Analysis of a Vertical Computer Numerically Controlled Machine Tool using Laser Measurement System, Nur Azzyah Abd.Jamil
  14. (2010) APPLICATION OF FUZZY DECISION FOR MEASUREMENT OF CUSTOMER SATISFACTION, SAMIRA NOORI
  15. (2009) TOOL CONDITION MONITORING IN TURNING WITH MULTIPLE SENSORS, MD. SAYEM HOSSAIN BHUIYAN
  16. (2009) On Line Tool Condition Monitoring Using Acoustic Emission in Machining, Md. Sayem Hossain Bhuiyan
  17. (2009) Injection Moulding Using RP, Gan Teck Wan
  18. (2009) FINITE ELEMENT ANALYSIS AND EXPERIMENTAL VERIFICATION OF POLYMER MELT TEMPERATURE AND PRODUCT SHRINKAGE IN INJECTION MOLDING, GAN TECK WAN
  19. (2009) DEVELOPMENT OF AN EARLY WARNING SYSTEM FOR WATER LEVEL IN RIVERS USING GLOBAL SYSTEM FOR MOBILE COMMUNICATION, SARMAD ZAHID AHMED
  20. (2009) COMPARISON OF RAPID PROTOTYPING USING FUSED DEPOSITION MODELLING AND Z CORP 3D MACHINE, OKEREKE STANLEY ONYEMAUCHE
  21. (2009) A STUDY OF PROCESS FAILURE MODES AND EFFECTS ANALYSIS WITH ERGONOMIC FACTORS, KHO YAN HAO
  22. (2009) A STUDY OF HIGH VARIETY AND LOW VOLUME MANUFACTURING SETUP, ASRAF ALI BIN MOHAMMAD ALI
  23. (2009) ACCURACY INSPECTION OF A QUASI STATIC ERROR IN CNC LATHE MACHINE USING LASER MEASUREMENT SYSTEM, SHAFIZAN BINTI SHARIFFUDDIN
  24. (2008) OPTIMIZATION OF CUTHING PARAMETERS FOR CERAMIC TOOL HAVING DIFFERENT EDGE GEOMATRIES IN HARD TURNING OF TOOL STEEL, ROHAIZAD BIN JAMALUDIN
  25. (2008) EVALUATION OF TOOL EDGE GEOMETRY FOR TURNING OF ASSAB DF-3 AND ALUMINIUM USING TAGUCHI METHOD, MOHD MUHAYMIN BIN MUHAMAD
  26. (2008) DEVELOPMENT OF ADD-ON TOOLS FOR MOLD DESIGN USING AUTOCAD VISUAL BASIC APPLICATION, AHMAD ISNIKURNIAWAN
  27. (2008) CALIBRATION AND ANALYSIS OF A VERTICAL COMPUTER NUMERICAL CONTROL MILLING MACHINE USING LASER MEASUREMENT SYSTEM, NUR AZYYAH BINTI ABDUL JAMIL
  28. (2008) A STUDY ON TOOL WEAR VARIATION IN MACHINING PROCESS USING COMPUTER VISION METHOD, OSAMA IBRAHEEM A ALSULTAN
  29. (2007) Mould and Die Add On Tools using AutoCAD VBA, Ahmad Isni Kurniawan
  30. (2001) Laser Cutting of Sheet Metals, Sastry Chandrasekariah (University of Malaya (UM))
  31. (2001) Conflict of Manual and Computer Aided Press Die Design, Azuddin Mamat (University of Malaya (UM))
Under Graduate Students
  1. (2007) Wireless Robot Control Systems
  2. (2007) Mould & Die Design
  3. (2007) Laser Material Processing
  4. (2007) CNC, EDM Wirecut & Die Sinking Machining
  5. (2007) Agriculture Tiller Design using FEA
  6. (2002) Laser Machining, EDM Die sinking, CNC Macining
  7. (2001) Laser Machining, EDM Die sinking, CNC Macining
  8. (1999) Concurrent Engineering Application

TEACHING


Master
  1. (2011) KXGP6302 - Computer Integrated Manufacturing
  2. (2010) KXGP6310 - Manufacturing Automation and Control
  3. (2009) KXGP6310 - Manufacturing Automation and Control
  4. (2008) KXGP6302 - Computer Integrated Manufacturing
  5. (2007) KXGP6306 - Global Manufacturing Strategies
  6. (2007) KXGP6310 - Manufacturing Automation and Control
Bachelor
  1. (2021) KIX2004 - Engineering Project Management
  2. (2021) KIG4039 - Mold and Die Design
  3. (2021) KIG4024 - Production Technology
  4. (2015) KCEC1101 - Computer Aided Drawing
  5. (2015) KMEM1103 - Introduction to Manufacturing Technology
  6. (2014) KUEP2141 - Workshop Technology Ii
  7. (2011) KCEC4101 - Computer Integrated Manufacturing
  8. (2011) KUEP2141 - Workshop Technology Ii
  9. (2010) KCEC4103 - Technology Cnc/Cam
  10. (2009) KCEC4103 - Technology Cnc/Cam
  11. (2008) KCEC1101 - Computer Aided Drawing
  12. (2008) KCEC4103 - Teknologi Cnc/Cam
  13. (2008) KCEC4103 - Technology Cnc/Cam
  14. (2007) KCEC1106 - Statics
  15. (2007) KCEC1107 - Dynamics
  16. (2007) KCEC4103 - Technology Cnc/Cam
  17. (2003) KCEC3222 - Teknologi Cnc/Cam
  18. (2003) KCEP3255 - Mekatroniks
  19. (2002) KCEC3222 - Technology Cnc/Cam
  20. (2002) KCEP3255 - Mekatroniks
  21. (2001) KCEC3222 - Technology Cnc/Cam
  22. (2001) KCEP2252 - Automasi
  23. (2001) KCEP3255 - Mechatronics
  24. (2000) KCEC1101 - Computer Aided Drawing
  25. (2000) KCEP2252 - Introduction to Automation
  26. (2000) KMP3603 - Rekabentuk Kejuruteraan
  27. (1999) KCEP3222 - Teknologi Cnc/Cam
  28. (1999) KXEX1121 - Computer Aided Design
  29. (1998) KCEP2252 - Introduction to Automation
  30. (1998) KXEX1121 - Computer Aided Design

SOCIAL RESPONSIBILITY ACTIVITIES


  • Malaysiapulih Distribution for Flood Victims in Klang Valley, (28 Dec 2021 - 29 Dec 2021) (National)
  • Membantu Mangsa Banjir Di Ulu Langat, (28 Dec 2021 - 29 Dec 2021) (National)
  • Program Penggalakkan Kokurikulum Memanah Sek.Men.Sains Selangor, (01 Sep 2015 - 30 May 2016)
  • Auditor Anugerah Masjid Malaysia Jakim Amm 2014, (15 Jun 2014 - 11 Nov 2014)
  • Internatioanl Conference of Ergonomics (Ice2007), (03 Dec 2007 - 05 Dec 2007)
  • 10th Aunseednet Filedwise Seminar, (18 Dec 2006 - 19 Dec 2006)
  • Aunseednet 1st Fieldwise Seminar, (06 Mar 2003)
  • Pengadil Minggu Mindakreatif 2002 UM, (15 May 2002 - 15 May 2002)
  • Bendahari Sekolah Agama Rakyat Assiddiqin, Btp, (28 May 2001 - 15 Mar 2003)
  • AJK Surau Assiddiqin, Btp, (15 May 2001 - 15 Mar 2003)
  • Naib Pengerusi Penaja Persatuan Penduduk Bandar Tasik Puteri, (01 Jan 2001 - 31 Mar 2003)

COURSE ATTENDED


External Course
NATIONAL
  1. Railway track maintenance seven parameters, Depoh Bahagian Jalan Ktmb (18 Aug 2022 - 18 Aug 2022)