Curriculum Vitae

PROF. DR. NORHAYATI BINTI SOIN

Professor
  • Department of Electrical Engineering
    Faculty of Engineering
  • +603-79674583

AREAS OF EXPERTISE

  • MICROELECTRONICS
    Reliability of integrated circuit and semiconductor devices, ic design and semiconductor device modeling
  • MICRO ELECTRO-MECHNICAL SYSTEM(MEMS)
    RF MEMS and BIOMEMS

ACADEMIC QUALIFICATION

  • PhD (UKM)(2006), (Kejuruteraan Elektrik, Elektronik dan Sistem)
    Universiti Kebangsaan Malaysia (UKM)
  • MSc (MicroElectronic&IT)(Liverpool,UK)(1999), (Kejuruteraan Elektronik dan Informasi Sistem)
    Liverpool John Moores University
  • BEng (Hons) (Electic&Electronic)(Liverpool,UK)(1991), (Kejuruteraan Elektrik dan Elektronik)
    Liverpool University, Liverpool, UK

ADMINISTRATIVE DUTIES

  • Director
    03 Jan 2023 - present (Centre of Printable Electronics, Deputy Vice-Chancellor (Research and Innovation))
  • Committee Members
    01 Feb 2022 - 29 Feb 2024 (Faculty)
  • Committee Members
    01 Dec 2021 - 30 Nov 2025 (Faculty)
  • Director
    01 Jan 2021 - 31 Dec 2022 (Centre of Printable Electronics, Deputy Vice-Chancellor (Research and Innovation))
  • Coordinator of PHD Program
    16 Dec 2019 - 15 Jan 2021 (Department of Electrical Engineering, Faculty of Engineering)
  • JK Pemeriksa Ijazah Dasar
    01 Sep 2019 - 01 Sep 2021 (Department of Electrical Engineering, Faculty of Engineering)
  • Coordinator fo
    16 Dec 2019 - 15 Jan 2021 (Department of Electrical Engineering, Faculty of Engineering)
  • Talent Development committee member
    01 Oct 2019 - 30 Sep 2021 (Department of Electrical Engineering, Faculty of Engineering)
  • Director
    01 Jan 2019 - 31 Dec 2020 (Centre of Printable Electronics, Deputy Vice-Chancellor (Research and Innovation))
  • Tracer study coordinator
    01 Jan 2018 - 31 Dec 2019 (Department of Electrical Engineering, Faculty of Engineering)
  • Panel penyiasatan Aduan
    01 Aug 2019 - 31 Dec 2019 (Department of Electrical Engineering, Faculty of Engineering)
  • AJK Surau Fakulti Kejuruteraan
    03 May 2018 - 02 May 2019 (Department of Electrical Engineering, Faculty of Engineering)
  • Director
    01 Jan 2018 - 31 Dec 2018 (Centre of Printable Electronics, Deputy Vice-Chancellor (Research and Innovation))
  • Director of Center of Printable Electronics, University of Malaya
    01 Jan 2018 - 31 Dec 2018 (University Malaya)
  • Acting Director
    22 Apr 2017 - 31 Dec 2017 (Centre of Printable Electronics, Deputy Vice-Chancellor (Research and Innovation))
  • Academic Advisor
    01 Nov 2016 - 31 Jul 2017 (Department of Electrical Engineering, Faculty of Engineering)
  • Deputy Director of Center of Printable Electronics, University Malaya
    21 Apr 2016 - 20 Apr 2017 (International)
  • Microelectronic Lab Coordinator
    01 Jun 2006 - 31 Dec 2016 (Department of Electrical Engineering, Faculty of Engineering)
  • Jawatankuasa Penilaian Spesifikasi bagi Pembelian "Customized High-Voltage Electromechanical Spinning System with Nanowire Patterning Capability
    01 Sep 2016 - 30 Sep 2016 (University Malaya)
  • Head of VLSI Research Group
    01 Apr 2011 - 01 Apr 2016 (Department of Electrical Engineering, Faculty of Engineering)
  • FRGS 2016 panel reviewer
    01 Feb 2016 - 31 May 2015 (University Malaya)
  • Industrial training Coordinator
    01 Aug 2011 - 01 Aug 2015 (Department of Electrical Engineering, Faculty of Engineering)
  • Felo Pusat Usahasama Kecemerlangan Rekabentuk Mikroelektronik (CEDEC),USM
    25 Apr 2014 - 31 Dec 2015 (National)
  • Jawatankuasa Kurikulum Review Fakulti Kejuruteraan
    01 Mar 2011 - 01 Mar 2014 (Department of Electrical Engineering, Faculty of Engineering)
  • Master trainer for ADEC
    03 Jun 2011 - 31 Dec 2013 (University Malaya)
  • Coordinator of Industrial Talk
    01 Oct 2012 - 01 Oct 2013 (Department of Electrical Engineering, Faculty of Engineering)
  • Head of Master Program ( Industrial Electronics and Control)
    01 Jul 2011 - 01 Jul 2012 (Department of Electrical Engineering, Faculty of Engineering)
  • Computer Engineering Program Cordinator
    02 Nov 2009 - 01 Nov 2010 (Department of Electrical Engineering, Faculty of Engineering)
  • Acting Head of Department
    12 Jul 2010 - 16 Jul 2010 (Department of Electrical Engineering, Faculty of Engineering)
  • Acting Head of Department
    14 Jun 2010 - 18 Jun 2010 (Department of Electrical Engineering, Faculty of Engineering)
  • Acting Head of Department
    09 Feb 2010 - 10 Feb 2010 (Department of Electrical Engineering, Faculty of Engineering)
  • Microelectronic Consortium Coordinator
    01 Jan 2006 - 01 Jan 2009 (University Malaya)
  • Industrial Training Coordinator
    15 Jul 2009 - 01 Nov 2009 (Department of Electrical Engineering, Faculty of Engineering)
  • Advisor of Engineering Society Study scheme (ESOSS 2009)
    01 Jan 2009 - 31 Dec 2009 (University Malaya)
  • Ahli Jawatankuasa Pengajian Mahasiswa
    01 Apr 2006 - 28 Jul 2008 (Department of Electrical Engineering, Faculty of Engineering)
  • Acting Head of Department
    17 Jul 2008 - 17 Jul 2008 (Department of Electrical Engineering, Faculty of Engineering)
  • Acting Head of Department
    20 May 2008 - 26 May 2008 (Department of Electrical Engineering, Faculty of Engineering)
  • Jawatankuasa Pemilihan Pelajar Sarjana Muda Sesi 2007/2008
    01 Feb 2007 - 30 Dec 2007 (University Malaya)
  • Acting Head of Department
    17 Dec 2007 - 21 Dec 2007 (Department of Electrical Engineering, Faculty of Engineering)
  • Acting Head of Department
    20 Nov 2007 - 21 Nov 2007 (University Malaya)
  • Student s under achievement monitoring project Committee
    01 Jul 2006 - 01 Aug 2007 (Department of Electrical Engineering, Faculty of Engineering)
  • Biomed 2006 International Conference Organizing Committee
    01 Jan 2006 - 31 Dec 2006 (University Malaya)
  • Jawatankuasa Pemilihan Pelajar Sarjana Muda (sesi 2006/2007)
    01 Feb 2006 - 30 Dec 2006 (University Malaya)
  • First year lab Coordinator
    01 Jan 1999 - 31 May 2001 (Department of Electrical Engineering, Faculty of Engineering)
  • Seminar Program Coordinator
    01 Jun 2000 - 31 May 2001 (Department of Electrical Engineering, Faculty of Engineering)

MEMBERSHIPS

  • IEEE ELECTRON DEVICES SOCIETY (EDS), MEMBER
    2019 to 2022 (International)
  • BOARD OF ENGINEERS MALAYSIA, PROFESSIONAL ENGINEER
    2017 to 2022 (National)
  • INSTITUTE OF ELECTRICAL ENGINEERS MALAYSIA, MEMBER
    2017 to 2022 (National)
  • PROFESSIONAL ENGINEER, PROFESSIONAL ENGINEER
    2017 to 2021 (National)

AWARD AND STEWARDSHIP

  • EXCELLENCE SERVICE AWARD
    University of Malaya, 2023 (University)
  • Human Resource Development Certified Trainer
    Ministry of Human Resource, 2022 (National)
  • Innovation award
    UiTM, 2022 (National)
  • COVID-19 Innovation Awards
    Malaysia Technology Expo 2020, 2020 (National)
  • UNIVERSITY HIGHLIGHT: RESEARCH HIGHLIGHTS FROM VLSI RELIABILITY RESEARCH GROUP, UNIVERSITY OF MALAYA
    Electronic Device Failure Analysis Society, 2019 (International)
  • IEEE Electron Devices Society Malaysia Chapter Outstanding Volunteer/Student Volunteer Award
    IEEE Electron Devices Society Malaysia Chapter, 2018 (National)
  • KHIDMAT SETIA 20 AWARD
    , 2017 (University)
  • MIMOS Prestigious Award 2014:Supervision of Doctoral Dissertation (Dr. Fatmadiana Wan Muhamad Hatta)
    MIMOS Malaysia, 2014 (National)
  • Innovation and Creativity Expo 2010
    University of Malaya, 2010 (University)
  • Completion of INTEL-MDeC Advanced VLSI Train the trainer Program
    INTEL and MDeC, 2010 (National)
  • Gold medal for outstanding achievement in physical sciences and Engineering:A Novel lab on a disk spin stand system for Biomedical applications
    Innovation and Creativity Expo 2010, University of Malaya, 2010 (University)
  • MSC Malaysia Industry Collaboration:MDEC-ALTERA Train the trainer:Digital System Design on FPGA platform
    Multimedia Development Coporation, 2009 (International)
  • National Industry Expert
    Ministry of Human Resources, 2009 (National)
  • EXCELLENCE SERVICE AWARD
    University of Malaya, 2008 (University)
  • Cedec's Standard Cells Library and Design Kit Training
    University of Science Malaysia, 2008 (National)
  • Certificate of Professional development programme on wireless sensor and actuator networks
    TEKBAC Group of Companies, 2008 (International)
  • CERTIFICATE OF EXCELLENT SERVICE
    University of Malaya, 2006 (University)
  • Invited speaker
    Infineon Technology, 2003 (National)

PUBLICATIONS

Article in Journal
WoS
  1. Ma, Li-Ya; Soin, Norhayati (2022). Recent Progress in Printed Physical Sensing Electronics for Wearable Health-Monitoring Devices: A Review, IEEE SENSORS JOURNAL. 22(5), 3844-3859. doi:10.1109/JSEN.2022.3142328
  2. Rezali, Fazliyatul Azwa Md; Soin, Norhayati; Wan Muhamad Hatta, Sharifah Fatmadiana; Daut, Mohamad Hazwan Mohd; Nouxman, Muhammad Hafizuddin Al-Helmy; Hussin, Hanim (2022). Design Strategies and Prospects in Developing Wearable Glucose Monitoring System Using Printable Organic Transistor and Microneedle: A Review, IEEE SENSORS JOURNAL. 22(14), 13785-13799. doi:10.1109/JSEN.2022.3181043
  3. Wong, Goon Weng; Soin, Norhayati (2022). Optimization of On-Chip Meander Line Resistor by Using DOE Method, IETE JOURNAL OF RESEARCH. (), . doi:10.1080/03772063.2021.2021817
  4. Hussin, H., Soin, N., Hatta, S., Rezali, F. A. M., & Wahab, Y. A. (2021). Review-Recent Progress in the Diversity of Inkjet-Printed Flexible Sensor Structures in Biomedical Engineering Applications. Journal of the Electrochemical Society, 168(7), 25. doi: 10.1149/1945-7111/ac0e4b
  5. Jaafar, A., Soin, N., Hatta, S., Salim, S. I., & Zakaria, Z. (2021). Multipoint Detection Technique with the Best Clock Signal Closed-Loop Feedback to Prolong FPGA Performance. Applied Sciences-Basel, 11(14), 19. doi: 10.3390/app11146417
  6. Yusof, Norliana; Bais, Badariah; Yunas, Jumril; Soin, Norhayati; Majlis, Burhanuddin Yeop (2021). Fabrication of Suspended PMMA-Graphene Membrane for High Sensitivity LC-MEMS Pressure Sensor, MEMBRANES. 11(12), . doi:10.3390/membranes11120996
  7. Bais, B., Yusof, N., Soin, N., Yunas, J., Majlis, B. Y. (2020). Development and Characterization of Freestanding Poly (Methyl Methacrylate)/Monolayer Graphene Membrane. Ieee Access, 8, 29702-29710. doi: 10.1109/access.2020.2972558
Others
  1. Md. Helal Miah, Md. Bulu Rahman, Mohammad Nur-E-Alam, Narottam Das, Norhayati Binti Soin, Sharifah Fatmadiana Wan Muhammad Hatta, Mohammad Aminul Islam (2022).Understanding the Degradation Factors, Mechanism and Initiatives for Highly Efficient Perovskite Solar Cells.: ChemNanoMat 2022, e202200471
  2. Hussin, H., Soin, N., Hatta, S. F. W. M., Rezali, F. A. M., & WAHAB, Y. A. (2021). Recent Progress in the Diversity of Inkjet-Printed Flexible Sensor Structures in Biomedical Engineering Applications. Journal of The Electrochemical Society.
  3. Yusof, N; Bais, B; Yunas,.J; Soin, N; Yeop Majlis, B. (2021).Fabrication of Suspended PMMA-Graphene Membrane for High Sensitivity LC-MEMS Pressure Sensor, Membranes.11(96)
  4. Zulfikar Zulfikar , Norhayati Soin , Sharifah Fatmadiana Wan Muhamad Hatta , Mohamad Sofian Abu Talip and Anuar Jaafar Routing Density Analysis of Area-Efficient Ring Oscillator Physically Unclonable Functions (2021) .Appl .Sci., 11(20), 9730
  5. 7.Karim, NM, Soin, N, ; Fearday, C.( 2020) Mitigation of Threshold Voltage Shift Due to Negative Bias Temperature Instability by Exploiting Solgel-Derived TiO2 Incorporation. NATIONAL ACADEMY SCIENCE LETTERS-INDIA Volume: 43 Issue: 1 Pages: 23-26
  6. ASS Abadi, PA Hosseinabadi, NB Soin, S Mekhilef (2020).Chattering-Free Adaptive Finite-Time Sliding Mode Control for Trajectory Tracking of MEMS Gyroscope.Automatic Control and Computer Sciences.54(4).335-345.
  7. Badariah Bais ; Norliana Yusof ; Norhayati Soin ; Jumril Yunas ; Burhanuddin Yeop Majlis. 2020. Development and Characterization of Freestanding Poly (Methyl Methacrylate)/Monolayer Graphene Membrane. IEEE Access. Volume: 8. 29702-29710.
  8. Jaafar, A., N. Soin, S. Wan Muhamad Hatta, Salim, S. I. M. 2020. Reliability Extraction for FPGAs Using Multiple Point of Frequency Detection with Automated Clock Correction. ARCTIC Journal. 73 (11). 65-105.
  9. Maizan MUHAMAD Norhayati SOIN Harikrishnan RAMIAH. (2020).On Wafer Noise Figure De-Embedding Method for CMOS Differential LNA. IEICE TRANSACTIONS on Electronics.
  10. Abdul Wahab, Y., Fadzil, A., Soin, N., Fatmadiana, S., Zaman Chowdhury, Z., Hamizi, N. A., . . . Al-Douri, Y. (2019). Uniformity improvement by integrated electrochemical-plating process for CMOS logic technologies. Journal of Manufacturing Processes, 38, 422-431. doi:https://doi.org/10.1016/j.jmapro.2019.01.025
  11. Jaafar, Anuar; Soin, Norhayati; Hatta, Sharifah Wan Muhamad, (2019) Delay performance due to thermal variation on field-programmable gate array via the adoption of a stable ring oscillator. IET COMPUTERS AND DIGITAL TECHNIQUES Volume: 13 Issue: 5 Pages: 405-413
  12. Ma Li Ya, Norhayati Soin, Hazwan Daut, Sharifah Fatmadiana Wan Muhamad Hatta, (2019) Comprehensive Study on RF-MEMS Switches Used for 5G Scenario , IEEE Access, vol. 7, pp. 1-3 (Impact Factor : 4.098) (DOI: 10.1109/ACCESS.2019.2932800)
  13. Mahmoud, MM, Soin, N (2019). A comparative study of lifetime reliability of planar MOSFET and FinFET due to BTI for the 16 nm CMOS technology node based on reaction-diffusion model. Microelectronic Reliability. Vol: 97,53-65.
  14. Rahman, Sharidya., Hatta, S. W. M., & Soin, N. (2019). Analytical Optimization of AlGaN/GaN/AlGaN DH-HEMT Device Performance Based on Buffer Characteristics. ECS Journal of Solid State Science and Technology, volume 8, issue 2, P165-P173
  15. Mazita Mohamad,Norhayati Soin,Fatimah Ibrahim (2018).Design optimisation of high sensitivity MEMS piezoresistive intracranial pressure sensor using Taguchi approach. Microsystem Technologies. Vol 23.pp1-16.
  16. Nur Samihah Khairir, Rozina Abdul Rani, Rosmalini Ab Kadir, Norhayati Soin, Wan Fazlida Hanim Abdullah, Mohamad Hafiz Mamat, M. Rusop, Ahmad Sabirin Zoolfakar.(2018) Electrical Behavior of a Nanoporous Nb2O5/Pt Schottky Contact at Elevated Temperatures, Journal of Electronic Materials. pp1-10
  17. Othman, N. A. F., Azhari, F. N. N., Hatta, S. W. M., & Soin, N. (2018). Optimization of 7 nm Strained Germanium FinFET Design Parameters Using Taguchi Method and Pareto Analysis of Variance. ECS Journal of Solid State Science and Technology, 7(4), P161-P169.
  18. Othman, N. A. F., Hatta, S. F. W. M., & Soin, N. (2018). Impact of Channel, Stress-Relaxed Buffer, and S/D Si 1 x Ge x Stressor on the Performance of 7-nm FinFET CMOS Design with the Implementation of Stress Engineering. Journal of Electronic Materials, 1-11.
  19. Wong, Goon Weng; Soin, Norhayati. (2018) On-Chip Meander Line N-Well Resistor with Shielded Ground Conductor for Q-Factor Improvement. IETE Journal of Research Volume: 64 Issue: 2 Pages: 270-279
  20. Ainul Fatin Muhammad Alimin, Anis Amiera Mohd Radzi, Nur Ashikin Fariza Sazali, Sharifah Wan Muhamad Hatta and Norhayati Soin, Influence of Design Considerations of 32 nm Advanced Process High-k pMOSFETs on Negative Bias Temperature Instability and Study of Defects , Journal of Electronic Materials (2017), pp 1-8.
  21. B Ali, MFM Sabri, SM Said, NL Sukiman, I Jauhari & N Soin, High impact reliability and high temperature performance of Fe and Bi added Sn-1Ag-0.5Cu solder alloys. Journal of Materials Science: Materials in Electronics, 1-9. doi: 10.1007/s10854-017-6412-x (2017)
  22. F. A. Md RezaliM. A. S. Abd RasidN. A. F. OthmanS. Wan Muhamad Hatta, N. Soin.(2017).Work Function Tuning and Doping Optimization of 22-nm HKMG Raised SiGe/SiC Source Drain FinFETs. Journal of Electronic Materials, 46(3), 1567-1575
  23. Li-Ya Ma, Anis Nurashikin Nordin, Norhayati Soin (2017), A novel design of a low-voltage low-loss T-match RF-MEMS capacitive switch. Micro- and Nanosystems Information Storage and Processing Systems, Volume 12 , No 12. December 2017.
  24. Rahman, S. H. A., Soin, N., & Ibrahim, F. (2017). Load deflection analysis of rectangular graphene diaphragm for MEMS intracranial pressure sensor applications. Microsystem Technologies, 1-6.
  25. Sharidya Rahman, Nurul Aida Farhana Othman, Sharifah Wan Muhamad Hatta and Norhayati Soin.2017. Optimization of Graded AlInN/AlN/GaN HEMT Device Performance Based on Quaternary Back Barrier for High Power Application. J. Solid State Sci. Technology.Volume 6, issue 12, P805-P812
  26. Ward, Thomas A.; Fearday, Christopher J.; Salami, Erfan, Soin,Norhayati.(2017) A bibliometric review of progress in micro air vehicle research.INTERNATIONAL JOURNAL OF MICRO AIR VEHICLES Volume: 9 Issue: 2 Pages: 146-165.
  27. Fazliyatul Azwa Md Rezali, Maisarah Mazhar, Nurul Aida Farhana Othman, Sharifah Wan Muhamad Hatta, Norhayati Soin.'Performance and device design based on geometry and process considerations for 14/16-nm FinFETs stress engineering ' IEEE Transactions on Electron Devices
  28. Fearday, C., Ward, T.A., Soin, N. et al. Microsyst Technol (2016), Development of an inductor incorporated onto a carbon fiber MAV structural component, Microsystems Technologies, Springer
  29. Ma, Li-Ya, Nordin, Anis Nurashikin, Soin, Norhayati,2016,Design, optimization and simulation of a low-voltage shunt capacitive RF-MEMS switch, Microsystem technologies-micro-and nanosystems-information storage and processing systems. Volume: 22 Issue: 3 Pages: 537-549
  30. Tzer Hwai Gilbert Thio, Fatimah Ibrahim , Wisam Al- Faqheri, Norhayati Soin, Maria Kahar Bador, Marc Madou,2015. Sequential Push-Pull Pumping Mechanism for Washing and Evacuation of an Immunoassay Reaction Chamber on a Microfluidic CD Platform.PLOS ONE Volume: 10 Issue: 4
  31. Ya, Ma Li; Soin, Norhayati; Nordin, Anis Nurashikin, Design, Optimization and Simulation of a Low-Voltage Shunt Capacitive RF-MEMS Switch.2015. Microsystem Technologies
  32. Arshad, Norsuhaidah; Haron, Nor Zaidi; Zakaria, Zahriladha; Soin, Norhayati.Development of Resistive Random Access Memory Simulation Model for Defect Analysis and Testing. Advanced Science Letters, Volume 20, Numbers 10-12, October 2014, pp. 1745- 1750(6)
  33. H Hussin, N Soin, MF Bukhori, YA Wahab, S Shahabuddin, New Simulation Method to Characterize the Recoverable Component of Dynamic Negative-Bias Temperature Instability in p-Channel Metal Oxide Semiconductor Field-Effect Transistors,Journal of Electronic Materials, 1-7
  34. Hussin, H.; Soin, N.; Bukhori, M. F.; et al. Effects of Gate Stack Structural and Process Defectivity on High-k Dielectric Dependence of NBTI Reliability in 32 nm Technology Node PMOSFETs.SCIENTIFIC WORLD JOURNAL Article Number: 490829 Published: 2014
  35. M.H. Kamaruddin, N.Soin.Vertical trench DMOS fabrication process issue leading to Phosphorus cross- contamination towards p-type Silicon and its reaction to high temperature gate stress. IEEE Transaction on Electron Devices 2014.
  36. Mohamed Mounir, Norhayati Soin, and Hossam A. H. Fahmy, Design Framework to Overcome Aging Degradation of the 16 nm VLSI Technology Circuits,IEEE TRANSACTIONS ON COMPUTER-AIDED DESIGN OF INTEGRATED CIRCUITS AND SYSTEMS (TCAD)Vol. 33, Issue 5,pp 691-703
  37. S.W.M. Hatta, Z. Ji, J.F. Zhang, W.D. Zhang, N. Soin, B. Kaczer, S.D. Gendt, G. Groeseneken Energy distribution of positive charges in high-k dielectric. Microelectronics Reliability, Volume 54, Issues 9 10, September October 2014, Pages 2329- 2333
  38. Siti Amaniah Mohd Chachuli, Puteri Nor Aznie Fasyar, Norhayati Soin, Nissar Mohammad Karim, Norbayah YusopMaterials Science in Semiconductor Processing, Volume 24, August 2014, Pages 9-14
  39. Y. Abdul Wahab, N. Soin, S.W.M. Hatta. Defects evolution involving interface dispersion approaches in high- k/metal-gate deep-submicron CMOS. Microelectronics Reliability, Volume 54, Issues 9 10, September October 2014, Pages 2334-2338
  40. N.M.Karim, N.Soin,'Statistical forecasting algorithm on circuit level gain transformation due to negative bias temperature instability under microwave frequency spectrum' Journal of Computational Electronics
  41. Nissar Mohammad Karim , Sadia Manzoor, Norhayati Soin. 2013.Unification of contemporary negative bias temperature instability models for p-MOSFET energy degradation Review Article Renewable and Sustainable Energy Reviews, Volume 26, October 2013, Pages 776-780
  42. Nissar Mohammad Karim, Norhayati Soin, Sadia Manzoor, F.Y. Soon and M. Mounir. 2013. 'Prediction of energy change due to hot carrier injection in nano- structured CMOS system: perspective of an envelope detector' Microelectronic Engineering, Volume 111, November 2013, Pages 256-260
  43. S. Shahabuddin , N. Soin , K.K. Goh , Y. Abdul Wahab , H. Hussin.2013. 'Voltage Dependences of Parameter Drifts in Hot Carrier Degradation for n- channel LDMOS Transistors.'Microelectronics Engineering Journal, ((ISI Q2)
  44. Sharifah Fatmadiana Wan Muhamad Hatta, Zhigang Ji, Jian Fu Zhang, Meng Duan, Wei Dong Zhang,Norhayati Soin, Ben Kaczer, Stefan De Gendt, and Guido Groeseneken ,2013. Energy distribution of positive charges in gate dielectric: probing technique and impacts of different defects. IEEE Transactions on Electron Devices.(ISI Q1)
  45. Tzer Hwai Gilbert Thio, Fatimah Ibrahim, Wisam Al- Faqheri, Jacob Moebius, Noor Sakinah Khalid, Norhayati Soin, Maria Kahar Bador Abdul Kahar, Marc Madou, 2013, Push pull microfluidics on a multi-level 3D CD, Lab on Chip Journal, 51(5), pp 525-535(Q1) DOI:10.1039/C3LC00004D
  46. Tzer Hwai Gilbert Thio, Salar Soroori, Fatimah Ibrahim, Wisam Alfaqheri, Norhayati Soin, Marc Madou, . 2013. "Theoretical Development and Critical Analysis of Burst Frequency Equations for Passive Valves on Centrifugal Microfluidic Platforms,Journal of Medical, Biology and computing,(ISI Q2) DOI: 10.1007/s11517- 012- 1020-7
  47. H. Hussin, N. Soin, N.M. Karim, S.F. Wan Muhamad Hatta, On the effects of NBTI degradation in p-MOSFET devices Physica B: Condensed Matter Volume 407, Issue 15, 1 August 2012, Pages 3031 3033
  48. I. Izuddin, M.H. Kamaruddin , A.N. Nordin ,N. Soin. Trench DMOS interface trap characterization by three-terminal charge pumping measurement, Microelectronics Reliability, Volume 52, Issue 12, December 2012, Pages 2914-2919
  49. Nissar Mohammad Karim*, Norhayati Soin, Fatema Banitorfian, Sadia Manzoor. Analysis from the Perspective of Gate Material under the Effect of Negative Bias Temperature Instability. Journal of Microelectronics, Electronic Components and Materials Vol. 42, No. 2 (2012), 95 97
  50. Nissar Mohammad Karim*, Norhayati Soin, Fatema Banitorfian, Sadia Manzoor. Analyzing p-MOSFET Lifetime by Employing R-D Model & MOS Device Theory. Applied Mechanics and Materials Vols. 229-231 (2012) pp 1626-1629
  51. Puteri Nor Aznie Fahsyar and Norhayati Soin, 2012. Optimization of Design Parameters for Radiofrequency Identification Tag Rectifier using Taguchi Methods. IETE Technical Review, Pages 157 161.
  52. Yasmin Abdul Wahab, Anuar Fadzil Ahmad, Hanim Hussin and Norhayati Soin. 2012. Reduction of Annealed-Induced Wafer Defects in Dual-Damascene Copper Interconnects. Microelectronics Reliability, Volume 52, Issues 9 10, September October 2012, Pages 1975-1980.
  53. S.F. Wan Muhamad hatta, D. Abd. Hadi, N.Soin. 2010. Laser anneal induced effects on the NBTI degradation of advanced process 45nm high-k pMOS. Journal of Advanced Materials Research. Vol 189-193. :1862-1866
  54. S.F.Wan Muhamad Hatta, N.Soin, D. Abd Hadi, J.F.Zhang. 2010. NBTI degradation effect on advanced-process 45nm high-k PMOSFETs with geometric and process variations.Microelectronic Reliability.
  55. Hasikin, K., Soin N. & Ibrahim, F. 2009. Modeling of an Optical Diaphragm for Human Pulse Pressure Detection. Journal of World Scientific Engineering association Society (WSEAS) Transactions on Electronics, 5(11), pp. 447-456
  56. Hatta SFWM, Soin N Conference Information: International Conference on Nanoscience and Nanotechnology (NANO-SciTech 2008) AIP Conference Proceedings Volume: 1136 Pages: 835- 839 Published: 2009
  57. Jafar N, Soin N, The Microwave Noise Behaviour Of Dual Material Gate Silicon On Insulator International Conference on Nanoscience and Nanotechnology (NANO-SciTech 2008), NOV 18-21, 2008 Selangor, MALAYSIAAIP Conference Proceedings Volume: 1136 Pages: 820-824 Published: 2009
  58. Norsyahida Jafar & Norhayati Soin, Dual Material Gate Silicon On Insulator Design Impact On Linearity , Signal Processing and Its Applications, 2009. 5th IEEE International Colloqium, 6-8 March. ISBN: 978-1-4244- 4152-5 Page (0) 156- 159.
  59. Hatta SFWM, Soin N ,Design of a Low Voltage CMOS LNA at 2 GHz with Substrate-Bias International Electronic Conference on Computer Science, NOV 30-DEC 10, 2007 ELECTR NETWORK Source: INTERNATIONAL ELECTRONIC CONFERENCE ON COMPUTER SCIENCE Book Series: AIP CONFERENCE PROCEEDINGS Volume: 1060 Pages: 244-249 Published: 2008
  60. N. Soin and Y. T. Hua, a simulation study of hot-carrier induced interface and oxide trap distributions in mosfet s using charge pumping technique Journal of Solid State Science and Technology Letters Vol. 13, (supplementary) September 2006. pp. 238 240. ISSN 0128-8393
  61. Norhayati Soin dan Burhanuddin Yeop Majlis A Study of Silicon Anisotropic Etching for Corrugated Diaphragm Using KOH Solution Journal Physical Science, Universiti Sains Malaysia, Vol.18 (2008).
  62. S. F. Wan Muhammad Hatta and N. Soin , Design and Optimization of a 2.45GHz RFCMOS Low-Noise Amplifier . Journal of Solid State Communications, Elsevier Science. Sent for publication
  63. S. F. Wan Muhammad Hatta and N. Soin, The Effects of Substrate Bias On Low Voltage CMOS Low Noise Amplifier Computing Letters 2007, E-ISSN1574-0404.(ISI-CITED)
  64. 4.S. F. Siraj, N. M.D. Ali, W. N. L. Mahadi, N. Soin, and S. Z. Dawal, A proposed motivation program for under achieving students at the Faculty of engineering, university of Malaya.2007.(Index in SCOPUS)
  65. N. Soin and D. A Hadi , A Simulation Study of Short Channel Effects in Conventional and Lightly -Doped-Drain (LDD) P-MOSFET . Journal of Sustainability Science and Management (UMT Journal 2007).(Non-SCOPUS -CITED)
  66. Norhayati Soin dan Burhanuddin Yeop Majlis, Kajian mengenai kebersandaran pembentukan keadaan makan bawah penjuru terhadap jenis larutan pemunar dalam penghasilan diafragma beralun silikon Pertanika Journal of Science and Technology, Universiti Putra Malaysia. Vol. 14 No. 1& 2, January/July 2006. 41 -52.
  67. 18.N. Soin and N. Jaafar , The optimization of processing parameters for low gate induced drain leakage (GIDL) current in ldd nmosfets by using taguchi method Journal of Solid State Science and Technology Letters Vol. 13, (supplementary) September 2006,. ISSN 0128-8393.
  68. N. Soin and B. Y. Majlis, Development of perfect silicon corrugated diaphragm using anisotropic etching Microelectronic Engineering, Volume 83, Issues 4-9, April-September 2006. Pages 1438-1441.(ISI-CITED)
  69. Norhayati Soin dan Burhanuddin Yeop Majlis, Pencirian keadaan potong bawah penjuru ke atas diafragma beralun silikon . Jurnal Teknologi, Universiti Teknologi Malaysia, No.44 Disember 2006.(Non-SCOPUS-CITED)
  70. Norhayati Soin dan Burhanuddin Yeop Majlis, Kajian mengenai kesan suhu dan kepekatan larutan KOH terhadap pembentukan keadaan potong bawah penjuru diafram beralun silikon .Journal Physical Science, Universiti Sains Malaysia, Vol.17(2), Disember 2006, 79-100.
  71. Norhayati Soin dan Burhanuddin Yeop Majlis, Pembangunan kaedah rekabentuk diafram beralun silikon dengan menggunakan teknik punaran anisotropik untuk sensor tekanan MEMS . Jurnal Kejuruteraan, Universiti Kebangsaan Malaysia. Jilid 18 2006.(Non SCOPUS-CITED)
  72. Norhayati Soin dan Burhanuddin Yeop Majlis, Pembentukan diafragma beralun silikon dengan menggunakan teknik punaran anisotropik . Jurnal Teknologi Siri D, No. 45 Disember, Universiti Teknologi Malaysia, Disember 2006.(Non-Scopus CITED)
  73. N. Soin and B. Y. Majlis, Design and fabrication of perfect silicon corrugated diaphragm using KOH etching technique, Journal of Solid State Science and Technology, Vol. 12, No. 1(supplementary) December 2005.
  74. N. Soin, J. F. Zhang, G. Groeseneken, Experimental study of hot carrier degradation in n-mosfet s with oxide and oxynitride gate dielectrics using charge pumping technique, Journal of Solid State Science and Technology Letters, Vol. 12, No. 1 (supplementary) December 2005.
Books
  1. Norhayati Soin dan Burhanuddin Yeop Majlis, Silicon Corrugated Diaphrgam for MEMS Technology UKM publisher
  2. Siti Fatimah SIraj, Norhayati Soin, Wan Nor Liza Mahadi. 2014.Basic Electronic Components and Circuits UNIMAP Publication
Chapter in Books
  1. Hasikin, K., Ibrahim, F., & Soin, N. 2008. Determination of Design Parameters of a Biosensor for Human Artery Pulse Wave Detection, International Proceedings of the International Federation for Medical and Biological Engineering (IFBME), Springer 2008, June 25-28, 2008.[Indexed in SCOPUS]
  2. Murali Prasad Yogaragan, F. Ibrahim, N. Soin,. Effect of Electrode Geometric Parameters on Droplet Translocation in . IFMBE Series Book. ISSN 1680-0737.2008. (Indexed in SCOPUS)
  3. Norhayati Soin & Burhanuddin Yeop Majlis, Fabrication of silicon corrugated diaphragms for MEMS capacitive pressure sensor using anisotropic etching technique. UITM Publisher - Sent for publication. May 2007.
  4. Norhayati Soin & Marizan Mubin (2008). Perjuangan Memperkasakan Pendidikan Di Malaysia: Pengalaman 50 Tahun Merdeka: Pendidikan Swasta di Malaysia: Institut Pengajian Tinggi Swasta
  5. Norhayati Soin & Marizan Mubin. Perjuangan Memperkasakan Pendidikan Di Malaysia: Pengalaman 50 Tahun Merdeka: Pendidikan Swasta di Malaysia: Institut Pengajian Tinggi Swasta. Utusan publisher
  6. Murali Prasad Yogaragan, N. Soin, F. Ibrahim. A review on design parameters of microfluidic systems. IFMBE Series Book. ISSN 1680-0737.2007. (Indexed in SCOPUS)
  7. Salmah Karman, N. Soin, F. Ibrahim. A review on MEMS drug delivery in medical applications. IFMBE Series Book. ISSN 1680-0737.2007.(Indexed in SCOPUS)
  8. Siti Zawiah Md. Dawal, N.Soin,W.N.L.Mahadi,N.M.Abu Osman, N.M. Ali, S.A.Aziz, M. Yusof and Z. Ismail.A preliminary study of EMG measurements on biceps Brachii Muscles during repetitive task at automotive industry. IFMBE Series Book. ISSN 1680-0737.2007.(Indexed in SCOPUS)
  9. Wan Nor Liza Mahadi, N. A. Rashid, N. Md Ali, N. Soin and S. Z. Md Dawal. Biological Effects of EMF in Engineering Teaching Laboratories: A Review .IFMBE Series Book. ISSN 1680-0737.2007(Indexed in SCOPUS)
Article in Proceeding
  1. Farah Hamid ; N. Ezaila Alias ; Afiq Hamzah ; Zaharah Johari ; M. L. Peng Tan ; Razali Ismail ; Norhayati Soin. Reliability Analysis Of Gate-All-Around Floating Gate (GAA-FG) With Variable Oxide Thickness For Flash Memory Cell. 2020 4th IEEE Electron Devices Technology & Manufacturing Conference (EDTM.pg 274-277.
  2. Norliana Yusof ; Badariah Bais ; Norhayati Soin ; Muhamad Ramdzan Buyong ; Burhanuddin Yeop Majlis, Fabrication of Planar Microcoils for LC-MEMS Pressure Sensor ,2020 IEEE International Conference on Semiconductor Electronics (ICSE) pg164-167.
  3. Somanaathan Muthusamy ; Norhayati Soin. Design of Capacitive Mems Microphone for Fully Implantable Cochlear Implants. 2020 IEEE International Conference on Semiconductor Electronics (ICSE) 156-159.
  4. Yasmin Abdul Wahab, Norhayati Soin, Muhammad Nihal Naseer, Hanim Hussin, Rozana Aina Maulat Osman, Mohd Rafie Johan, Nor Aliya Hamizi, Omid Akbarzadeh Pivehzhani, Zaira Zaman Chowdhury, Suresh Sagadevan, Thennarasan Sabapathy, "Junction engineering in two-stepped recessed SiGe MOSFETs for high performance application" AIP Conference Proceedings
  5. Zulfikar Zulfikar ; Norhayati Soin ; Sharifah Wan Muhamad Hatta ; Mohamad Sofian Abu Talip. FPGA ring oscillator comparisons between conventional and uniform routing hotspots. 2020 IEEE International Conference on Semiconductor Electronics (ICSE) pg176-179.
  6. A. F. M. Alimin; H. H. Hizamul-din; S. F. W. M. Hatta; N. Soin The influence of shallow trench isolation angle on hot carrier effect of STI-based LDMOS transistors.2017 IEEE Regional Symposium on Micro and Nanoelectronics (RSM) (pp 248 - 251) Malaysia
  7. A. Jaafar; N. Soin; S. Wan Muhammad Hatta. (2017) An educational FPGA design process flow using Xilinx ISE 13.3 project navigator for students.2017 IEEE 13th International Colloquium on Signal Processing & its Applications (CSPA) pp 7-12
  8. Hatta, SF Wan Muhamad, H. Hussin, F. Y. Soon, Y. Abdul Wahab, D. Abdul Hadi, N. Soin, AHM Zahirul Alam, and A. N. Nordin. "Negative bias temperature instability characterization and lifetime evaluations of submicron pMOSFET." In Computer Applications & Industrial Electronics (ISCAIE), 2017 IEEE Symposium on, pp. 206-211. IEEE, 2017 (ISI-Indexed)
  9. Li-Ya Ma; Norhayati Soin; Anis Nurashikin Nordin, 2017. A K-band switched-line phase shifter using novel low-voltage low-loss RF-MEMS switch.2017 IEEE Regional Symposium on Micro and Nanoelectronics (RSM), (pp 14-17) Kuala Lumpur.
  10. Mohd Hanif Kamaruddin; Norhayati Soin; Low Hooi Yee; Candy Choo Kai Chyuan; Lee Nean Sem.(2017) Electrical characterization of gate electrode recess depth in ultra-thick SiO2, vertical trench DMOS. 2017 IEEE 24th International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA), pp 1-5
  11. Norliana Yusof; Badariah Bais; Burhanuddin Yeop Majlis; Norhayati Soin (2017) Mechanical analysis of MEMS diaphragm for bladder pressure monitoring.2017 IEEE Regional Symposium on Micro and Nanoelectronics (RSM) (pp 22-25) Malaysia
  12. Rahman, Sharidya, Nurul Aida Farhana Othman, Sharifah Wan Muhamad Hatta, and Norhayati Soin. "Effect of gate recess variation on electrical characteristics and 2DEG transport of InGaAs high electron mobility transistors." In Physical and Failure Analysis of Integrated Circuits (IPFA), 2017 IEEE 24th International Symposium on the, pp. 1-5. IEEE, 2017.
  13. 2.Othman, N. A. F., Hatta, S. W. M., & Soin, N. (2016, July). Performance of 7nm stress-engineered nFinFETs based on stressors consideration for different channel material. In IEEE 23rd International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA), 2016 (pp. 267-271). IEEE
  14. 8.Rahman, S. H. A., Soin, N., & Ibrahim, F. (2016, May). Design of graphene-based MEMS intracranial pressure sensor. In 2016 IEEE International Symposium on Medical Measurements and Applications (MeMeA), (pp. 1-5).
  15. Ali, M., Noorakma, A. C., Yusof, N., Mohamad, W. N. F., Soin, N., & Hatta, S. W. M. (2016, August). Optimization of MEMS intraocular capacitive pressure sensor. In 2016 IEEE International Conference on Semiconductor Electronics (ICSE), (pp. 173-176).
  16. Alimin, A. M., Hatta, S. W. M., & Soin, N. (2016, August). Effect of gate length on Negative Bias Temperature Instability of 32nm advanced technology HKMG PMOSFET. In 2016 IEEE International Conference on Semiconductor Electronics (ICSE), (pp. 272-275).
  17. M. Mohamad, Soin, N., & Ibrahim, F. (2016,Dec). Design of a high sensitivity MEMS piezoresistive intracranial pressure sensor using three turns meander shaped piezoresistors ,2016 IEEE International Conference on Bio-engineering for Smart Technologies (BioSMART)
  18. Ma, L. Y., Soin, N., & Nordin, A. N. (2016, May). A novel design of low-voltage low-loss K-band RF-MEMS capacitive switch. In ), 2016 IEEE Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP) (pp 1-5).
  19. Mahmoud, M. M., & Soin, N. (2016, July). BTI lifetime reliability of planar MOSFET versus FinFET for 16 nm technology node. In IEEE 23rd International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA), (pp. 262-266). IEEE
  20. Othman, N. A. F., Azhari, F. N. N., Hatta, S. W. M., & Soin, N. (2016, August). The application of Taguchi method on the robust optimization of p-FinFET device parameters. In 2016 IEEE International Conference on Semiconductor Electronics (ICSE), (pp. 141-144).
  21. Rahman, S. H. A., Soin, N., & Ibrahim, F. (Dec 2016). Residual Stress of Graphene-Based MEMS ICP Piezoresistive Pressure Sensors, In 2016 IEEE International Conference on Bio-engineering for Smart Technologies (BioSMART)
  22. Ya, M. L., Soin, N., & Nordin, A. N. (2016, August). Theoretical and simulated investigation of dielectric charging effect on a capacitive RF-MEMS switch. In 2016 IEEE International Conference on Semiconductor Electronics (ICSE), (pp. 17-20).
  23. Hussin, H., Soin, N., Hatta, S. W. M., & Bukhori, M. F. (2015, June). Characterization of NBTI-induced positive charges in 16 nm FinFET. In 2015 IEEE International Conference on Electron Devices and Solid-State Circuits (EDSSC), (pp. 365-368).
  24. Rezali, F. A. M., Hatta, S. F. W. M., & Soin, N. (2015, August). Scaling impact on design performance metric of sub-micron CMOS devices incorporated with halo. In 2015 IEEE Regional Symposium on Micro and Nanoelectronics (RSM), (pp. 1-4).
  25. Saba, N., Soin, N., & Khamil, K. N. (2015, May). Simulation and analysis of actuation voltage of electrostatically actuated RF MEMS cantilever switch. 2015 International Conference on In Smart Sensors and Application (ICSSA), (pp. 106-110).
  26. Ma Li Ya ; Soin, N. ; Nordin, A.N., Novel low-voltage RF-MEMS switch: Design and simulation, 2014 IEEE International Conference on Semiconductor Electronics, 142-145
  27. Muhamad, M. ; Soin, N. ; Ramiah, H. ; Noh, N.M. ; Chong Wee Keat,' On-wafer scattering parameter characterization of differential four-port networks LNA using two-port vector network analyzer'. 2014 IEEE International Conference on Semiconductor Electronics (ICSE),Publication Year: 2014 , Page(s): 339 - 342
  28. N Yusof, ACW Noorakma, N Soin,Corner compensation mask design on (MEMS) accelerometer structure, 2014 IEEE International Conference on Semiconductor Electronics (ICSE), 248-251
  29. Ma Li Ya ; Nordin, A.N. ; Soin, N.,Design and analysis of a low-voltage electrostatic actuated RF CMOS-MEMS switch, 2013 IEEE Regional Symposium on Micro and Nanoelectronics (RSM), 41-44
  30. Muhamad, M. ; Soin, N. ; Ramiah, H. ; Noh, N.M. ; Chong, W.K.Design of CMOS differential LNA at 2.4GHz 2013 IEEE International Conference of Electron Devices and Solid-State Circuits (EDSSC).pg. 1-2
  31. NA Othman, NM Karim, M Sufyan, N Soin,Impact of processing parameters on low-voltage power MOSFET threshold voltage considering defect generation, 2013 IEEE Regional Symposium on Micro and Nanoelectronics (RSM), pg 231-234
  32. Thio, T.H.G. ; Ibrahim, F. ; Al-Faqheri, W. ; Soin, N. ; Bador Abdul Kahar, M.K. ; Madou, M. Multi-level 3D implementation of thermo-pneumatic pumping on centrifugal microfluidic CD platforms 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC),2013 , Page(s): 5513 - 5516
  33. Z Ji, SFWM Hatta, JF Zhang, JG Ma, W Zhang, N Soin, B Kaczer, S De Gendt, G Groeseneken, Negative Bias Temperature Instability Lifetime Prediction: Problems and Solutions , International Electron Device Meeting (IEDM) 2013. Washington DC, USA, December 8 10.
  34. Soin, N. ; Shahabuddin, S.S. ; Goh, K.K. Measurement and characterization of hot carrier safe operating area (HCI-SOA) in 24V n-type lateral DMOS transistors. 2012 10th IEEE International Conference on Semiconductor Electronics. 659-663
  35. Asri, N.D.M.; Soin, N.Development of active inductor in CMOS tunable RF Bandpass filter.2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM).Page(s): 315 - 318
  36. Banitorfian, F.; Soin, N.2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM),Page(s): 152 - 155.
  37. Hussin, H.; Soin, N.2011 IEEE Symposium on Industrial Electronics and Applications (ISIEA),Page(s): 614 - 619
  38. Iqbal, S.M.A.; Mekhilef, S.; Soin, N.; Omar, R. Micro and Nanoelectronics (RSM),Dc-Dc buck and boost converter design issues in recent VLSI platform.Page (s): 135 - 138
  39. Iqbal, S.M.A.; Mekhilef, S.; Soin, N.; Omar, R.Buck and boost converter design optimization parameters in modern VLSI technology,2011 International Conference and Seminar of Young Specialists on Micro/Nanotechnologies and Electron Devices (EDM),Page(s): 125 - 128.
  40. Moghaddam, A.K.; Soin, N. Quality factor for RF-MEMS capacitive switch on semi-suspended CPW .2011 IEEE Regional Symposium on Micro and Nanoelectronics,Page(s): 339 - 343
  41. Muhamad, M.; Soin, N.; Ramiah, H.; Noh, N.M.; Keat, C.W.,A 0.13 inductively degenerated cascode CMOS LNA at 2.14GHz.2011 IEEE Symposium on Industrial Electronics and Applications (ISIEA),Page(s): 120 - 123
  42. Soon, F.Y.; Soin, N.2011 3rd Asia Symposium on Quality Electronic Design (ASQED), NBTI degradation with optimized ID-VG sweep for wafer fabrication monitoring.Page(s): 272 - 276
  43. Abdul Aziz A, Soin N. Dependency of Threshold Voltage on Floating Gate and Inter-Polysilicon Dielectric Thickness for Nonvolatile Memory Device.2010. IEEE International Conference on Semiconductor Electronics, pp 90-94
  44. D. Abd Hadi, S. F. Wan Muhamad Hatta, N. Soin. 2010. Effect of oxide thickness on 32nm pMOSFET reliability. IEEE International Conference on Semiconductor Electronics. pp 294-297
  45. Dayanasari Abdul Hadi, Norhayati Soin & Sharifah Fatmadiana Wan Muhamah Hatta. 2010. 2010 International Conference onEnabling Science and Nanotechnology (ESciNano), pp. 1-3.
  46. K. Hasikin, N. Soin, F. Ibrahim. 2010. Micro-diaphragm Performance Analysis for Polyimide Diaphragm. IEEE International Conference on Semiconductor Electronics. pp 352-355
  47. Khairi Bin Omar, Norhayati Soin, Wan Nor Liza Mahadi, Hassan Malik. 2010. A New Charger System Approach: The Current and Voltage Control Loops. IEEE International Conference on Semiconductor Electronics. pp 192-197
  48. New Chin-Ee, Norhayati Soin, Qualitative and Quantitative Evaluation of A Proposed Circuit Switched Network-on-Chip , IEEE International Conference on Semiconductor Electronics, Malacca, Malaysia 28 -30 June 2010,pp 124-129
  49. P.N.A.Fahsyar, N.Soin. 2010. A Proposed Low Power Voltage Multiplier for Passive UHF RFID Transponder. IEEE International Conference on Semiconductor Electronics. pp 397-400.
  50. P.N.A.Fahsyar, N.Soin. 2010. CMOS Implementation of Envelope Detector Circuit in 0.18 Process. IEEE International Conference on Semiconductor Electronics. pp 169-172
  51. S.F.Wan Muhamad Hatta, N.Soin, J.F.Zhang. 2010. The Effect of Gate Oxide Thickness and Drain Bias on NBTI Degradation in 45nm PMOS. IEEE International Conference on Semiconductor Electronics.pp 260-263
  52. S.F.Wan Muhamad Hatta, N.Soin, J.F.Zhang.2010. The Effect of Process Variation on NBTI Degradation in 90nm PMOS. IEEE International Conference on Semiconductor Electronics. pp 256-259
  53. Siong Kiong Teng, Norhayati Soin. 2010. Regional Clock Gate Splitting Algorithm for Clock Tree Synthesis. IEEE International Conference on Semiconductor Electronics. pp 155- 158
  54. Asmah Truky, Norhayati Soin, Hassan Malik. 2009.Design of CMOS 0.18 Low Power Bandgap Voltage Reference.2009 IEEE Regional Symposium on Micro and Nano Electronics
  55. Dayanasari Abdul Hadi & Norhayati Soin. 2009. International Conference for Technical Postgraduates (TECHPOS), pp. 1-5
  56. Khairi Omar, Norhayati Soin, Wan Nor Liza Mahadi 2009. Design of Battery Charger System and Electrostatic Discharge (ESD) Safety Devices for Lithium-ion battery 2009 IEEE Regional Symposium on Micro and Nano Electronics
  57. Norsyahida Jafar and Norhayati Soin,'Analog and Short Channel Effects Performance of Sub-100 nm Graded Channel Fully Depleted Silicon On Insulator (SOI)' 8th WSEAS International Conference on Microelectronics, Nanoelectronics, Optoelectronics, Date: MAY 30-JUN 01, 2009 Istanbul TURKEY MINO'09: PROCEEDINGS OF THE 8TH WSEAS INTERNATIONAL CONFERENCE ON MICROELECTRONICS, NANOELECTRONICS, OPTOELECTRONIC
  58. Puteri NorAznie Fasyar, Norhayati Soin, Dayanasari A. Hadi, UHF RFID Tag Design to achieve Lower Power Consumption 2009 IEEE Regional Symposium on Micro and Nano Electronics, Aug. 10 -12.2009.
  59. .F.Lai, W. N. L. Mahadi & N. Soin, Circular Patch Microstrip Array Antenna for KU-Band, WCSET 2008 Conference in Bangkok, Thailand,
  60. Asmah Truky, Norhayati Soin, and Sairan Sakrani Review of Low Power Bandgap Voltage Reference for CMOS Mixed Signal Process .Proc. IEEE Colloquium on signal processing and its applications, Kuala Lumpur, Malaysia (Mac 2008) ISBN: 983-42562-0-5
  61. Hasikin, K., Ibrahim, F. & Soin, N. (2008). Modeling of a Micro-Diaphragm Biosensor for Human Artery Pulse Wave Detection. 2008 IEEE International Conference on Semiconductor Electronics.
  62. Khairi Bin Omar, Norhayati Soin, Wan Nor Liza Mahadi and Sairan Sakrani Review of the Lithium-ion battery charger, charge system and their Electrostatic Discharge (ESD) safety devices .Proc. IEEE Colloquium on signal processing and its applications, Kuala Lumpur, Malaysia (Mac 2008) ISBN: 983-42562-0-5
  63. Khairunnisa Hasikin, Fatimah Ibrahim, Norhayati Soin. "Determination of Design Parameters of a Biosensor for Human Artery Pulse Wave Detection BIOMED 2008 25 -28 June
  64. Khairunnisa Hasikin, Fatimah Ibrahim, Norhayati Soin. Analysis of stress distribution of a circular diaphragm of a biosensor for human artery pulse wave detection International Conference of Funtional Material and Devices (ICFMD 2008)
  65. M. Mubin, S. Ouchi, N. Kodani, N. Mokhtar, N. Soin, Stability of Two-Inertia System Using Non-linear Controller: Application to Drive-Control System of Electric Vehicle , The 13th International Symposium on Artificial Life and Robotics, 31 Jan 2 Feb, Oita, Japan, pp. 423 426, 2008.
  66. Murali Prasad Yogarajan, Fatimah Ibrahim, Norhayati Soin. Effect of Electrode Geometric Parameters on Droplet Translocation in Digital Micro-fluidic Biosensor BIOMED 2008 25 -28 June
  67. N. Soin and B. Y. Majlis, Characterization of Anisotropic Etching Effects of KOH Concentration and Temperature on Etching Profiles Properties of Silicon Corrugated Diaphragm American Institute of Physics Proceedings. June 2007; ISBN 978-0-7354-0417-5. pp 128 -132. (Indexed in SCOPUS)
  68. N. Soin and C. L. Yan. Impact of technology scaling on the RF performance of the low noise amplifier . International Conference of Funtional Material and Devices (ICFMD 2008).
  69. N. Soin, C. L. Yan Study of the Gate-Induced Drain Leakage Current of N-MOSFETS.Proc. IEEE Colloquium on signal processing and its applications, Kuala Lumpur, Malaysia (Mac 2008). ISBN: 983-42562-0-5
  70. N. Soin, S. Karman, and F. Ibrahim. Study of circular bossed structure membrane for MEMS micropump characterization International Conference on Knowledge/IT Based Development (ICKID 2008) 22 24 June 2008. Madinah, Saudi Arabia
  71. N.Jafar & N.Soin, The microwave noise behaviour of dual material gate silicon on insulator (SOI), International Conference on Nanoscience and Nanotechnology (NANO-SciTech 2008), 18-21 Nov 08, Shah Alam, Malaysia.
  72. Norsyahida Jaafar and Norhayati Soin. Gate material engineering influences towards subthreshold and i-v characteristics of fully depleted silicon on insulator (FD-SOI) NMOS . International Conference of Funtional Material and Devices (ICFMD 2008)
  73. Norsyahida Jafar and Norhayati Soin. 2008. Design considerations of sub-100nm dual material gate fully depleted silicon on insulator (DMG-FD-SOI). Proceeding IEEE International Conference of Semiconductor Electronics (ICSE). pp 69-75
  74. Prasad , N. Soin F. Ibrahim, A Review of micro channel for MEMS drug delivery Proc. Kuala Lumpur Int. Con. On Biomedical Engineering 2006, 11- 14 December 2006.
  75. S. F. Wan Muhammad Hatta and N. Soin Application of the Taguchi method in the optimization of RF-Low Noise Amplifier design parameters Proc. IEEE Colloquium on signal processing and its applications, Kuala Lumpur, Malaysia (Mac 2008) ISBN: 983-42562-0-5.(Index in SCOPUS)
  76. S. F. Wan Muhammad Hatta and N. Soin. Design of an RF CMOS LNA at 2.45 GHz using Power Constrained Simultaneous Noise Input Matching and Gain Enhancement Technique 33rd International Electronics Manufacturing Technology Conference (IEMT 2008)
  77. S. F. Wan Muhammad Hatta and N. Soin. Design of an RF- CMOS LNA at 2.45ghz based on channel inversion level selection . International Conference of Funtional Material and Devices (ICFMD 2008)
  78. S. Karman, N. Soin, F. Ibrahim, Electrostatic MEMS micropump for advance technology of insulin therapy International Conference on Ergonomics (ICE 2007) 3 5 December, Kuala Lumpur
  79. S. Karman, N. Soin, and F. Ibrahim. A Static Modeling of a High Performance MEMS Micropump for Medical Application ICMN 2008. 13 15 May. Kuala Lumpur
  80. S. Karman, N. Soin, and F. Ibrahim. An Analytical Study on circular bossed membrane structure for electrostatic actuated micropump in drug delivery system ICMN 2008. 13 15 May. Kuala Lump
  81. S.F.Wan Muhamad Hatta, N.Soin, Performance Optimization of the Low Noise Amplifier , International Conference on Nanoscience and Nanotechnology (NANO-SciTech 2008), Selangor, Malaysia, November 2008
  82. S.F.Wan Muhamad Hatta, N.Soin.2008. Performance of a Forward-Biased RF LNA With Deep N-Well NMOS Transistor. 2008 IEEE International Conference on Semiconductor Electronics (ICSE 2008), pg 430-433
  83. Soin & C.L.Yan, A comparative study on Analog/RF performance of ultra-thin body (UTB) SOI and double gate MOSFETs IEEE International Conference of Semiconductor Electronics (ICSE) proc., pp 76-81
  84. T.F.Lai, Wan Nor Liza, Norhayati Soin. Performance of roger rt/duroid 5870/5880 material at ku-band. International Conference of Funtional Material and Devices (ICFMD 2008)
  85. The 4th Malaysian Software Engineering Conference (MySEC 08)
  86. N. Soin and B.Y.Majlis. Characterization of anisotropic effects on KOH concentration and temperature on etcthing profiles properties of silicon corrugated diapraghm. American Institute of Physics Proceedings. 2007.(Index in SCOPUS)
  87. N. Soin and K. Hasikin, Influence of Polysilicon-gate Depletion of p-type MOSFET on Potential Drop across Polysilicon Gate.National Physics Conference 2007, 26 28 Dec 2007, Trengganu.
  88. N. Soin and N. Mat Saad, Study of the Off-state leakage current in Silicon-on-insulator (SOI) n-MOSFET for RF circuit design.National Physics Conference 2007, 26 28 Dec 2007, Trengganu.
  89. N. Soin, F. Ibrahim and Khairun Nisha Review On Detection of Human Artery Pulse Wave by Using a Biosensor International Conference on Ergonomics (ICE 2007) 3 5 December, Kuala Lumpur
  90. C. Y. Desmond and N. Soin Gate Depletion Analysis of MOSFETs with Polysilicon Gate TECHPOS 06 15-16 May 2006 Kuala Lumpur
  91. D. Abdul Hadi and N. Soin A Simulation Study on Short Channel Effects (SCE) for Lightly Doped Drain (LDD) of PMOSFET. TECHPOS 06 15-16 May 2006 Kuala Lumpur
  92. K. C. Thim and N. Soin Study of leakage current mechanisms and leakage suppression techniques in deep sub-micormeter n- MOSFETs TECHPOS 06 15-16 May 2006 Kuala Lumpur
  93. L. S. Yen, S. M. Said, N. Soin, K. Ibrahim, and K. B. Sang, Study on Alignment Capability and Overlay Performance in 130nm BEOL Lithography Process. Proc. IEEE Int. Conf. on Semiconductor Electronics, Kuala Lumpur,Malaysia 29 Nov. 1 Dec.(2006).pp.603-609
  94. L.S. Yen, S. M. Said and N. Soin, Characterization and Effect of Mask Error Factor (MEF) on Advanced Photolithography Process. TECHPOS 06 15-16 May 2006 Kuala Lumpur
  95. N. Jafar and N. Soin Analysis of Gate Induced Drain Leakage (GIDL) Behavior Attributing to Band to Band Tunneling (BBT) Mechanism in NMOS Device'TECHPOS 06 15-16 May 2006 Kuala Lumpur
  96. N. Soin, J. F. Zhang, G. Groeseneken, Determination of Charge Pumping Parameters in Characterization of hot-carrier degradation for nMOSFETs Proc. International Conference on Manufacturing and Material Processing, ICMM 2006, 14 16 Mac Kuala Lumpur
  97. N.Soin, B. Y. Majlis, M .M. Nor and J. A. Ghani , The Optimization of KOH Anisotropic Etching Parameters for Silicon Corrugated diaphragm Fabrication Process Using Taguchi method . Proc. International Conference on Manufacturing and Material Processing, ICMM 2006, 14 16 Mac Kuala Lumpur
  98. S. Alias, W.N. Liza and N. Soin, Review on the Optimization of Q-Factors of MEMS RF Spiral Inductors. TECHPOS 06 15-16 May 2006 Kuala Lumpur
  99. S. F. Wan Muhammad Hatta and N. soin, A Micro-Power LNA Utilizing Inter-Stage Series Resonance and Optimizing the Substrate Resistance Proc. IEEE Int. Conf. on Semiconductor Electronics, Kuala Lumpur,Malaysia 29 Nov. 1 Dec.(2006). pp. 747 750
  100. S. Karman, F. Ibrahim and N. Soin, A Review of MEMS drug delivery Proc. Kuala Lumpur Int. Con. On Biomedical Engineering 2006, 11- 14 December 2006
  101. S.Z.M. Dawal, N. Soin, W.N. W. Mahadi, N. M. Ali, N. Mohd, S. A. Aziz, Masniza and Z. Ismail, A Study of EMG measurements on biceps muscles during repetitive task at automotive industry Proc. Kuala Lumpur Int. Con. On Biomedical Engineering 2006, 11- 14 December 2006.pg. 170 172.
  102. W. N. L. Mahadi, A. Rashid, N. Md Ali, N.Soin, S. Z. M. Dawal, Biological Effects of EMF in Engineering Teaching Laboratories: A Review Proc. Kuala Lumpur Int. Con. On Biomedical Engineering 2006, 11- 14 December 2006.pg. 81 83
  103. Z. Kamaruddin, W.N. Liza and N. Soin, On Materials and Applications of Magnetic MEMS Technology,TECHPOS 06 15-16 May 2006 Kuala Lumpur.
  104. N. Soin and B. Y. Majlis, Development of perfect silicon corrugated diaphragm using anisotropic etching in Proc. 31st International Conference on Micro and Nano Engineering, Vienna, Austria, 19-22 September (2005) pp. 406-407
  105. N. Soin and B. Y. Majlis, Fabrication of silicon corrugated diaphragm for MEMS capacitive pressure sensor using anisotropic etching technique Proc. IEEE Colloquium on signal processing and its applications, Pulau Pangkor, Malaysia (2005) ISBN: 983-42562-0-5
  106. N. Soin, and B. Y. Majlis, KOH Etching Process of Perfect Square MEMS Corrugated Diaphragm in Proc. SPIE International Symposium on Microelectronics, MEMS and Nanotechnology 2005, Brisbane, Australia, 11-14 December
  107. N. Soin, and B. Y. Majlis, Convex corner undercutting on corrugated diaphragm, in Proc. IEEE Int. Conf. on Semiconductor Electronics, Kuala Lumpur (2004), pp.393-399
  108. N. Soin, and B. Y. Majlis, Electrostatic behavior of MEMS capacitive pressure sensors with non-planar diaphragms under electrical loading Proc. Design, Test, Integration and Packaging of MEMS/MOEMS, Montreux, Switzerland, (2004),158-162
  109. N. Soin, and B. Y. Majlis, Realization of Perfect Silicon Corrugated Diaphragm using KOH etching in Proc. IEEE Int. Conf. on Semiconductor Electronics, Kuala Lumpur (2004), pp.400-406
  110. N. Soin, and B. Y. Majlis, The design and fabrication of corrugated diaphragm for MEMS capacitive pressure sensor Proc. Seminar Siswazah UKM, Bangi, Malaysia, (2004), 125-130
  111. N. Soin, and B. Y. Majlis, A simulation based study on modal analysis of micromachined capacitive pressure sensor diaphragms Proc. IEEE National Symposium on Microelectronics, Perlis, Malaysia (2003) 158-162.
  112. N. Soin, and B. Y. Majlis, Investigations of the properties of corrugated diaphragms for micromachined capacitive pressure sensor Proc. IEEE National Symposium on Microelectronics, Perlis, Malaysia, (2003)154-157
  113. N. Soin, and B. Y. Majlis, Performance of corrugated diaphragms for MEMS capacitive pressure sensor Proc. University Of Malaya Technical postgraduate Seminar TECHPOS 03, Kuala Lumpur,Malaysia (2003) 447-452
  114. N. Soin, J. F. Zhang, G. Groeseneken, The dependence of gate current density and substrate bias on trapped electrons , Proc. IEEE Int. Conf. on Semiconductor Electronics, Penang (2002), pp.566 570
  115. N. Soin, and B. Y. Majlis, An analytical study on diaphragm behavior for micromachined capacitive pressure sensor , Proc. IEEE Int. Conf. on Semiconductor Electronics, Penang, Malaysia,(2002) 505-510
  116. N. Soin, S.F. Siraj, N. Md. Ali, and W. N. Wan Mahadi,, A review on microelectronics industry in Malaysia Proc. IEEE National Symposium on Microelectronics, Pahang (2001), pp.393-399
  117. N. Md. Ali, W. N. L. Wan Mahadi, N. Soin and S. F. Siraj, Attitude development towards the engineering profession , in Proc. Of the electrical engineering conference EEC 2000, Kuala Lumpur 8-9 August (2000), pp.505-510, pp.154-162
  118. N. Soin, J. F. Zhang, G. Groeseneken, MOSFETs Reliability: Electron Trapping in gate dielectric , Proc. IEEE Int. Conf. on Semiconductor Electronics, Port Dickson,Malaysia (2000), pp.104-109
  119. N. Soin, S. F. Siraj, W. N. Wan Mahadi, N. Mohd Ali, Woman Engineers in Malaysia: Their Role in Society , The Association of Southeast Asia Institutions of Higher Learning (ASAIHL) Conference, Malaysia (November) 2000.
  120. S. F. Siraj and N. Soin, On the social consciousness engineering students , in Proc. Electrical engineering conference EEC 2000, Kuala Lumpur 8-9 August (2000), pp.505-510, pp.154-162
  121. W. N. Mahadi, N. Ali, N. Soin, S. F. Hj. Siraj, Biological Effects of Electromagnetic Fields: A Review , National Conference on Biomedicine, BIOMED 2000, Kuala Lumpur 27-28 September (2000), pp. 74 -77
  122. N. Soin, J. F. Zhang, G. Groeseneken, A Study Of Electron Trap Generation By Hot Carrier Stress On N-MOSFET With Oxide And Oxynitrides Gate Dielectric By Charge Pumping Technique , in Proc. National Symposium on Microelectronics, Pulau Pangkor 6-7 September (1999), pp.56-60

RESEARCH PROJECT

National
  1. 2011 - 2015, High Impact Research (HIR)
    Characterization of the Negative Bias Temperature Instability (NBTI) Impact on New- Age Deep-Submicron Devices to Effectively Predict System Failure ( Principal Investigator(PI))
  2. 2012 - 2014, KPT-Research acculturation collaborative effort (RACE)
    New test schemes for emerging computer memory devices ( Consultant)
  3. 2006 - 2008, UM and MIMOS BHD
    Design and fabrication of MEMS microfluidic devices for medical applications ( Principal Investigator(PI))
  4. 2001 - 2002, Short Term Research Fund (Vote F)(PJP)
    A comparative study of oxides and oxynitrides as the gate dielectrics ( PROJECT LEADER)
  5. 1999 - 2000, Short Term Research Fund (Vote F)(PJP)
    Mosfet s Reliability: Electron trapping in gate dielectric: A charge pumping study ( Principal Investigator(PI))
International
  1. 2009 - 2010, Geran Penyelidikan Universiti Malaya (UMRG)
    Design of UHF RFID transponder chip on 0.18um CMOS ( Principal Investigator(PI))
  2. 2007 - 2009, Fundamental Research Grant Scheme (FRGS)
    Design of a Novel Silicon-On- Insulator (SOI) CMOS Radio Frequency (RF) Ultra- Low Power Low Noise Amplifier (LNA) ( Principal Investigator(PI))
  3. 2008 - 2009, Short Term Research Fund (Vote F)(PJP)
    Modeling of a novel structure of SOI Mosfet for RF applications ( Principal Investigator(PI))
  4. 2007 - 2007, University of Malaya
    Development of a high-performance MEMS micro-pump for drug delivery systems ( Principal Investigator(PI))
  5. 2007 - 2007, University of Malaya
    Design of a Novel Silicon-On- Insulator (SOI) CMOS Radio Frequency (RF) Ultra- Low Power Low Noise Amplifier (LNA) ( Principal Investigator(PI))
  6. 2004 - 2007, IRPA
    Fabrication, Characterisation and Modelling of Novel Ferroelectric Liquid Crystal Devices ( Consultant)
  7. 2002 - 2005, UM and IMEN-UKM
    Design and fabrication of silicon corrugated diaphragm for mems pressure sensor ( -Research Student)
University
  1. 2007 - 2008, Short Term Research Fund (Vote F)(PJP)
    Study of Spiral Inductor for RF IC Design ( Principal Investigator(PI))

CONSULTANCY PROJECT

  • Perunding Sistem (Dse), Jabatan Pembagunan Kemahiran
    01 Dec 2009 - 01 Dec 2011 (National)
  • Effect of Cantas On User's Health, Lembaga Minyak Sawit Malaysia
    01 Apr 2011 - 01 Apr 2011 (National)
  • Research in Science and Technology, UPUM and Industries
    01 Nov 2008 - 01 Nov 2008 (University)
  • Ergonomics in Workplace, UPUM and Industries
    01 Nov 2008 - 01 Nov 2008 (National)
  • Undergraduate Skills Program Coordinator (Mdec) for Vlsi Design Course, Multimedia Development Corporation Sdn Bhd
    01 Nov 2007 - 01 Nov 2007 (National)

PAPER PRESENTED

PLENARY SPEAKER
  1. Printed Flexible and Stretchable Electronics Devices, Industrial-Institution Engagement & Educators Summit (I2Es) 2021, MARA- Japan Industrial Institute (MJII) Beranang, Selangor. (International) (27 Oct 2021 - 28 Oct 2021)
  2. Semiconductor Sevice reliability in Nano Era, 17th International Bhurban Conference on Applied Sciences and Technology (IBCAST)-2020, Center of Excellence in Science, Islamabad, Pakistan (International) (14 Jan 2020 - 17 Jan 2020)
  3. Semiconductor device & Integrated circuitreliability challenges in nanoelectronics Era, National Symposium on Micro-Nano Technology 2019 (NasMiNT2019), Kementerian Tenaga. Sains, Teknologi, Alam Sekitar dan Perubahan Iklim (National) (08 Oct 2019 - 08 Oct 2019)
INVITED SEMINAR
  1. Review on MEMS Green Packaging and Reliability., Infineon Technical Seminar, Infineon (National) (01 Jul 2003)
INVITED SPEAKER
  1. Printed Flexible and Stretchable Electronics Toward Wearable Healthcare, Malaysia Nanotech Industrial Congress 2022, Institute of Microengineering and Nanoelectronics IMEN) UKM, Malaysia Nanotechnology Association and NanoMalaysia Berhad (National) (08 Sep 2022 - 08 Sep 2022)
  2. The Application of TCAD Simulation Tools for Design Process Optimization Towards Realizing Flexible MEMS based Sensors, 6th Electron Devices Technology and Manufacturing Conference (EDTM 2022) , IEEE Electron Devices Society (EDS)  (International) (06 Mar 2022 - 09 Mar 2022)
  3. Printed Electronics for Healthcare applications, Merdeka Campus Competition Program Indonesia, Electrical Engineering Study Program of Universitas Syiah Kuala, Indonesia (University) (28 Oct 2021 - 28 Nov 2021)
  4. Postgraduate Supervision: Supporting student early, during and final stages, EMERALD Supervision, ADEC, UM (University) (17 Mar 2021 - 17 Mar 2021)
  5. Effective undergraduate and postgraduate supervision, UTEM Supervision Workshop, UTEM (University) (27 Jan 2021 - 27 Jan 2021)
  6. Physical Unclonable Function (PUF)-security enabled FPGA for medical solutions in IOT., IEEE EDS Mini Colloquium 2019 on Photovoltaics and Nanoelectronics, IEEE Electron Devices Society Malaysia Chapter (International) (09 Apr 2019 - 09 Apr 2019)
  7. Microelectronics Research Acitivities in University of Malaya, Asian Microelectronics 2003, AUNSEED Net (International) (28 Aug 2003 - 29 Aug 2003)
ORAL PRESENTER
  1. Residual Stress of Graphene-Based MEMS ICP piezoresistive Pressure Sensor, International Conference on Bio-engineering for Smart Technologies (BioSMART 2016), IEEE (International) (04 Dec 2016 - 07 Dec 2016)
  2. Design of a high sensitivity MEMS piezoresistive intracranial pressure sensor using three turns meander shaped piezoresistors, International Conference on Bio-engineering for Smart Technologies (BioSMART 2016), IEEE (International) (04 Dec 2016 - 07 Dec 2016)
  3. Experimental Degradation Analysis in Lateral DMOS Transistors, 38th International Micro & Nano Engineering Conference (MNE 2012 (International) (16 Sep 2012 - 20 Sep 2012)
  4. A Review of micro channel for MEMS drug delivery, 3rd Kuala Lumpur International Conference On Biomedical Engineering (BIOMED 2006), Department of Biomedical Engineering, University of Malaya (International) (18 Jul 2006 - 19 Jul 2006)
PRESENTER
  1. Design of CMOS differential LNA at 2.4GHz, 2013 IEEE International Conference of Electron Devices and Solid-State Circuits (EDSSC, IEEE (International) (01 Oct 2013)
  2. ( Impact of Processing Parameters on Low-Voltage Power MOSFET Threshold Voltage Considering Defect Generation ) , 2013 IEEE REGIONAL SYMPOSIUM ON MICRO AND NANOELECTRONICS (IEEE-RSM2013) , IEEE Electron Devices Society (International) (25 Sep 2013 - 27 Sep 2013)
  3. Voltage Dependences of Parameter Drifts in Hot Carrier Degradation for n-channel LDMOS Transistors , Infineon Innovation Carnival 2013, Infineon Technologies (National) (04 Sep 2013 - 04 Sep 2013)
  4. Embedded Systems curriculum in University of Malaya, 2012 Intel Embedded Research & Education Summit, Arizona, United States., INTEL (International) (22 Feb 2012 - 24 Feb 2012)
  5. Quality factor for RF-MEMS capacitive switch on semi-suspended CPW, 2011 IEEE Regional Symposium on Micro and Nanoelectronics, IEEE (National) (01 Apr 2011)
  6. Capacitive sensor interfacing circuit using 0.18-nm CMOS technology for MEMS application, 2011 IEEE Regional Symposium on Micro and Nanoelectronics , IEEE (National) (01 Apr 2011)
  7. Development of active inductor in CMOS tunable RF Bandpass filter, 2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM), IEEE (National) (01 Apr 2011)
  8. Simulation analysis of flow rate behavior for variation in width of microchannel and positions of reservoirs for CD microfluidic platform, Forth Saudi Science Conference 2010, Taibah University, Madinah (International) (21 Mar 2010 - 24 Mar 2010)
  9. Effect of Electrode Geometric Parameters on Droplet Translocation in Digital Micro-fluidic Biosensor , 4th Kuala Lumpur International Conference on Biomedical Engineering, University of Malaya (International) (26 Jun 2008 - 28 Jun 2008)
  10. Determination of Design Parameters of a Biosensor for Human Artery Pulse Wave Detection, 4th Kuala Lumpur International Conference on Biomedical Engineering, University of Malaya (International) (26 Jun 2008 - 28 Jun 2008)
  11. Study of circular bossed structure membrane for MEMS micropump characterization, International Conference on Knowledge/IT Based Development (ICKID 2008)  (International) (22 Jun 2008 - 24 Jun 2008)
  12. Design of an RF- CMOS LNA at 2.45ghz based on channel inversion level selection, . International Conference on Functional Materials and Devices, UITM, UM and Institute of Material Malaysia (International) (16 Jun 2008 - 19 Jun 2008)
  13. Impact of technology scaling on the RF performance of the low noise amplifier, International Conference on Functional Materials and Devices, UITM, UM and Institute of Materials Malaysia (International) (16 Jun 2008 - 19 Jun 2008)
  14. Analysis of stress distribution of a circular diaphragm of a biosensor for human artery pulse wave detection , . International Conference on Functional Materials and Devices, UITM, UM and Institute of Materials Malaysia (International) (16 Jun 2008 - 19 Jun 2008)
  15. Gate material engineering influences towards subthreshold and i-v characteristics of fully depleted silicon on insulator (FD-SOI) NMOS , International Conference on Functional Materials and Devices, UITM, Um and Institute of Materials Malaysia (International) (16 Jun 2008 - 19 Jun 2008)
  16. An Analytical Study on circular bossed membrane structure for electrostatic actuated micropump in drug delivery system, International Conference on MEMS and Nanotechnology, IIUM and IEEE (International) (13 May 2008 - 15 May 2008)
  17. A Static Modeling of a High Performance MEMS Micropump for Medical Application, International Conference on Mems and Nanotechnology, IIUM and IEEE (International) (13 May 2008 - 15 May 2008)
  18. Application of the Taguchi method in the optimization of RF-Low Noise Amplifier design parameters , IEEE Colloquium on signal processing and its applications, UITM and IEEE (National) (07 Mar 2008 - 07 Mar 2008)
  19. Review of Low Power Bandgap Voltage Reference for CMOS Mixed Signal Process, IEEE Colloquium on signal processing and its applications, UITM and IEEE (National) (07 Mar 2008 - 09 Mar 2008)
  20. Review of the Lithium-ion battery charger, charge system and their Electrostatic Discharge (ESD) safety devices, IEEE Colloquium on signal processing and its applications, Kuala Lumpur, Malaysia, UITM and IEEE (National) (07 Mar 2008 - 09 Mar 2008)
  21. Study of the Gate-Induced Drain Leakage Current of N-MOSFETS, IEEE Colloquium on signal processing and its applications (National) (07 Mar 2008 - 09 Mar 2008)
  22. 1.Review On Detection of Human Artery Pulse Wave by Using a Biosensor 2.Electrostatic MEMS micropump for advance technology of insulin therapy , International Ergonomics Conference 2007, University of Malaya (International) (03 Dec 2007 - 05 Dec 2007)
  23. Design of an rf bipolar junction transistor low noise amplifier at 1ghz , 2006 IEEE International Conference on Semiconductor Electronics, UKM and IEEE Malaysia (International) (29 Nov 2006 - 01 Dec 2006)
  24. Characterization of Anisotropic Etching Effects of KOH Concentration and Temperature on Etching Profiles Properties of Silicon Corrugated Diaphragm. 2.A Simulation Study of Short Channel Effects in Conventional and Lightly -Doped-Drain (LDD) P-MOSFET. 3.A Study of Short-Channel Effects in Silicon-On-Insulator (SOI) N-MOSFETs in Deep Sub-micrometer Regime 4.The optimization of processing parameters for low gate induced drain leakage (GIDL) current in ldd nmosfets by using taguchi method. 5.Gate Depletion Analysis of PMOSFETs with Polysilicon Gate. 6.A simulation study of hot-carrier induced interface and oxide trap distributions in mosfet s using charge pumping technique , The Second International Conference on Solid State Science and Technology 2006 , Malaysian Association of Solid State Science (International) (04 Sep 2006 - 06 Sep 2006)
  25. 1.Design and fabrication of perfect silicon corrugated diaphragm using KOH etching technique 2. Experimental study of hot carrier degradation in n-mosfet s with oxide and oxynitride gate dielectrics using charge pumping technique , Regional Conference on Solid State Science & Technology , Malaysian Association of Solid State Science (Others) (18 Dec 2005 - 21 Dec 2005)
  26. 1.Convex corner undercutting on corrugated diaphragm 2.Realization of Perfect Silicon Corrugated Diaphragm using KOH etching , 2004 IEEE International Conference on Semiconductor Electronics, UKM and IEEE Malaysia Section (International) (10 Dec 2005 - 12 Dec 2005)
  27. Development of MEMs diaphragm with corrugated structure using anisotropic etching, 9th International Conference on Mechatronics Technology (International) (05 Dec 2005 - 08 Dec 2005)
  28. 1.The Optimization of KOH Anisotropic Etching Parameters for Silicon Corrugated diaphragm Fabrication Process Using Taguchi method. 2.Determination of Charge Pumping Parameters in Characterization of hot-carrier degradation for nMOSFETs , International Conference on Manufacturing and Material Processing, University of Malaya (International) (14 Mar 2005 - 15 Mar 2005)
  29. Electrostatic behavior of MEMS capacitive pressure sensors with non-planar diaphragms under electrical loading, Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2004 (International) (09 May 2004 - 12 May 2004)
  30. 1.A simulation based study on modal analysis of micromachined capacitive pressure sensor diaphragms 2. Investigations of the properties of corrugated diaphragms for micromachined capacitive pressure sensor , 2003 IEEE National Symposium on Microelectronics, UKM and IEEE Malaysia (National) (10 Sep 2003 - 12 Sep 2003)
  31. 1.An analytical study on diaphragm behavior for micromachined capacitive pressure sensor 2.The dependence of gate current density and substrate bias on trapped electrons , 2002 IEEE International Conference on Semiconductor Electronics, UKM and IEEE Malaysia Section (International) (10 Dec 2002 - 12 Dec 2002)
  32. A review on microelectronics industry in Malaysia, 2001 IEEE National Symposium on Microelectronics, UKM and IEEE Malaysia Section (National) (03 Sep 2001 - 04 Sep 2001)
  33. MOSFETs Reliability: Electron Trapping in gate dielectric, 2000 IEEE International Conference on Semiconductor Electronics, UKM and IEEE Malaysia (International) (20 Dec 2000 - 22 Dec 2000)
  34. On the social consciousness engineering students, Electrical engineering conference EEC 2000, University of Malaya (International) (10 Aug 2000 - 11 Aug 2000)
  35. A Review of MEMS drug delivery 2.A Review of micro channel for MEMS drug , Kuala Lumpur international conference on biomedical engineering 2006 , University of Malaya (International) (  -  )
KEYNOTE SPEAKER
  1. Printed Flexible and Stretchable Electronics for wearable health care, THE 1st WORLD ENGINEERING, SCIENCE, AND TECHNOLOGY APPLICATION CONFERENCE (WESTAC) 2022, UNIMAP (National) (17 Jul 2022 - 18 Jul 2022)
  2. Printed electronics for wearable health applications, 1st Malaysia International Conference on Nanotechnology & Catalysis (MICNC2021) , Nanotechnology & Catalysis Research Centre (NANOCAT) , Universiti Malaya (International) (01 Sep 2021 - 03 Sep 2021)
  3. Reskilling and Upskilling TVET Educators in the Era of IR 4.0, National Conference in Education-Technical & Vocational Education Training (CiE-TVET) , Jabatan Pengajian Politeknik, KPT (National) (17 Aug 2021 - 19 Nov 2021)
  4. Sustainable flexible electronics in E-Waste management, Malaysian Polytechnic and Community College Sustainable Award 2021_ (MPCCSustAWARD21), Jabatan Pengajian Politeknik , KPT (National) (29 Jun 2021 - 01 Jul 2021)
OTHERS
  1. Sharing session: Work balance, International Women's Day: An evening with EDS past chair, IEEE Electron Devices Society , Malaysia Chapter (National) (08 Mar 2021 - 08 Mar 2021)
  2. Negative Bias Temperature Instability, IEEE Electron Devices Society Let's Talk, IEEE Electron Devices Society  (International) (04 Dec 2020 - 04 Dec 2020)
  3. Collaborating and Succeeding in R&D: How Industry and Academia Can Collaborate in R&D to Move Up the E&E Value Chain . , Collaborative Research in Engineering, Science and Technology , CREST 2013, CREST (National) (09 Oct 2013 - 09 Oct 2013)
  4. study using two stage NBTI model for 32 nm high-k PMOSFET, 2013 IEEE International Conference of Electron Devices and Solid-State Circuits (EDSSC), , IEEE (International) (01 Oct 2013)
  5. Multi-level 3D implementation of thermo-pneumatic pumping on centrifugal microfluidic CD platforms, 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society , IEEE (International) (01 Oct 2013)
  6. A 0.13 inductively degenerated cascode CMOS LNA at 2.14GHz, 2011 IEEE Symposium on Industrial Electronics and Applications (ISIEA),, IEEE (National) (01 Apr 2011)
  7. NBTI degradation with optimized ID-VG sweep for wafer fabrication monitoring, 2011 3rd Asia Symposium on Quality Electronic Design (ASQED), , IEEE (International) (01 Apr 2011)
  8. Safe operating condition and lifetime estimation in p-MOSFET device due to Negative Bias Temperature Instability, 2011 IEEE Symposium on Industrial Electronics and Applications (ISIEA),, IEEE (National) (01 Apr 2011)
  9. Dc-Dc buck and boost converter design issues in recent VLSI platform, 2011 IEEE Regional Symposium on Micro and Nanoelectronics (National) (01 Apr 2011)
  10. Buck and boost converter design optimization parameters in modern VLSI technology, 2011 International Conference and Seminar of Young Specialists on Micro/Nanotechnologies and Electron Devices (EDM), IEEE (National) (01 Apr 2011)

ACADEMIC/PROFESSIONAL SERVICES

Evaluation
  1. (2023) Expert Committee to Evaluate Candidate : Imen UKM, National, (External Assessor)
  2. (2023) Bachelor of Electronic Engineering Technology (Microelectronics) With Honours,Bmi Unikl, National, (External Assessor)
  3. (2023) Program Master Kejuruteraan Sistem Mikroelektronik (Mmse),UPM, National, (External Evaluator)
  4. (2023) Program Sarjana Kejuruteraan Elektronik (Kejuruteraan Komputer) Di Fakulti Kejuruteraan Elektronik dan Kejuruteraan Komputer, Universiti Teknikal Malaysia Melaka, National, (External Examiner)
  5. (2022) Siksha O Anusandhan Phd Thesis: Gate-All-Around Stacked-Nanowire/Nanosheet Transistors for Sub-7nm Technology Nodes, International, (External Examiner)
  6. (2022) Diversity in Test Pattern Generation for High Fault Coverage in Black Box Testing Environment, National, (External Examiner)
  7. (2022) Phd Thesis Mmu: En H a N C E D W Eig H T Ed Ps Eu D O R a N D O M Tes T Pa T T Er N G En E R a T Io N Fo R B U Ilt-in Self-T Est, National, (External Examiner)
  8. (2022) Phd Thesis Uniten: Cadmium Selenide (Cdse) as a Prospective Window Layer for Cadmium Telluride (Cdte) Thin Film Solar Cells., National, (External Examiner)
  9. (2022) Siksha 'O' Anusandhan Univ Phd Thesis: Design and Simulation of Strain-Engineered Trigate Finfets At 7nm Technology Nodes, International, (External Examiner)
  10. (2022) Label-Free Detection of Foodborne Pathogens Based On Dielectrophoresis Phenomenon, International, (Reviewer)
  11. (2022) Evaluation of Kpj Healthcare University College Research Proposal (Mygrants), National, (External Assessor)
  12. (2022) Academic Promotion ( Ap Ds54) Unisza, National, (External Assessor)
  13. (2022) Variability-Aware Circuit Approximation, International, (Reviewer)
  14. (2022) Imen UKM Phd Thesis: Pencirian Sela Mikroelektrod Dielektroforesis Bagi Pengesanan Masa Nyata Patogen Eskape, National, (External Examiner)
  15. (2022) Pengubahsuaian Polimer Cetakan Molekul Ke Atas Elektrod Karbon Cetakan Skrin Bagi Pengesanan Awal Kreatinin, National, (External Examiner)
  16. (2022) Phd Thesis: An Efficient System-On-Chip With Neural Networking Capabilities for Use in Edge Computing, University, (External Examiner)
  17. (2022) Program Diploma Kejuruteraan Elektronik (Mikroelektronik), Mjii Beranang., National, (External Examiner)
  18. (2021) External Assessor for Academic Promotion Ds 54 Engineering College Ump, National, (External Assessor)
  19. (2021) Commercialization of Research Project, University, (Internal Evaluator)
  20. (2021) Pemeriksa Luar Bagi Program Sarjana Kejuruteraan Elektronik (Kejuruteraan Komputer) (Menc) Di Fakulti Kejuruteraan Elektronik dan Kejuruteraan Komputer (Fkekk), Utem, National, (External Examiner)
  21. (2021) Phd Thesis Evaluation:Radiation Tolerance Enhancement in Circuit Configuration and Architecture of Optically Reconfigurable Gate Array Chip, National, (External Examiner)
  22. (2021) School of Mechanical Engineering, USM PhD thesis.Fabrication of Micro/ Nanostructures by Using Electron Beam Lithography and Soft Lithography for Biological Application, (External Examiner)
  23. (2021) New Practical Repeater and Clock Network Design Methodologies for Complex System-On-Chip (Soc) Using Hybrid Meta Heuristic Technique, National, (External Examiner)
  24. (2021) External Assessor for Academic Promotion Ds 54 Engineering Faculty , Unimas, National, (External Assessor)
  25. (2021) A Wideband Cmos Power Amplifier With Integrated Digital Linearizer and Tunable Transformer. Thesis Evaluation, National, (External Examiner)
  26. (2021) Phd Thesis Evaluation :Design of Analog Signal Processing Modules Using Carbon Nanotube Filed Effect Transistors, University, (External Examiner)
  27. (2021) External Assessor for Promotional Exercise to The Post of Professor: Electrical Department, UKM, National, (External Examiner)
  28. (2020) UTM PhD thesis: Tight-Binding Quantum Transport In Graphene Nanoribbons With Line Edge Roughness And Doping , (External Examiner)
  29. (2020) Postgraduate program: Master of Microelectronic Engineering UPM, (External Examiner)
  30. (2020) DS 54 evaluation : Promotion for Academic Staff International Islamic University Malaysia (IIUM) Dr Rosminazuin, (External Assessor)
  31. (2019) IIUM Phd thesis : Integrated Electrochemical and Mass Biosensor for Early Dengue , (External Examiner)
  32. (2019) Academic promotion evaluation VK 7 IMEN UKM , (Reviewer)
  33. (2019) ASM Journal Title: Development of a Projection Stereolithography 3D Printing System for Rapid Prototyping of Microfluidics Devices , (Reviewer)
  34. (2019) Yayasan UTP Fundamental Research Grant , (Reviewer)
  35. (2019) Master thesis UKM:Pembangunan Antena MEMS untuk Penuai Tenaga Mikro Frekuensi Radio bagi Nod Rangkaian Tanpa Wayar, (External Examiner)
  36. (2019) ASM SCIENCE JOURNAL SPECIAL ISSUE , (Editor)
  37. (2019) Master thesis UKM: Rekabentuk dan simulasi mikrofon kapasitif MEMS menggunakan membran beralun dengan bahan terbenam, (External Examiner)
  38. (2019) Postgraduate Program for Microelectronic School UNIMAP , (External Examiner)
  39. (2019) Academic promotion DS 54 UNIMAP , (Reviewer)
  40. (2019) Academic promotion evaluation DS 54 IIUM , (Reviewer)
  41. (2019) Academic promotion for DS 54 UNIMAP: Dr Muammar, (External accessor)
  42. (2019) Academic promotion VK9, (external accessor)
  43. (2019) UNITEN PhD thesis: DEVELOPMENT OF GRAPHENE-BASED CMOS USING 2D ANALYTICAL MODELING , (External Examiner)
  44. (2018) UNIMAP Publisher: Electrical Installation Design , (Reviewer)
  45. (2018) FABRICATION OF HIGHLY ACTIVATED PN JUNCTION IN GERMANIUM SUBSTRATE , (External Examiner)
  46. (2018) Electrical Installation Design, (Reviewer)
  47. (2018) Panel penilai proposal geran penyelidikan FRGS and Applied research grand scheme for TVET, Kementerian Pendidikan, (Reviewer)
  48. (2018) External Examiner for academic promotion DM 54 UiTM , (External Examiner)
  49. (2018) UKM Phd Thesis 2018:Design, analysis and modelling of nanoscale transistors , (External Examiner)
  50. (2017) IEEE Transaction on Electron Devices"Impact of cross-section shape on 10 nm gate length InGaAs FinFET performance and variability" , (Reviewer)
  51. (2017) FAST FOURIER TRANSFORM (FFT) PROCESSORS IMPLEMENTATION FOR HIGH INPUTS ON FIELD PROGRAMMABLE GATES ARRAY (FPGA) , (Reviewer)
  52. (2017) Rekabentuk, simulasi dan fabrikasi peranti sitometer aliran-mikro menggunakan teknik cetakan 3D , (External Examiner)
  53. (2017) Linearization of power amplifiers with memory effects using memory polynomial and linearly interpolated look-up table predistorter , (External Examiner)
  54. (2017) MEMS microfluidic, (External Examiner)
  55. (2017) International Journal of Electrical & Electronic Systems Research, NBTI Effects on Circuit Reliability Performance of 4-bit Johnson Counter Based on Different Simulation Configuration, (Reviewer)
  56. (2016) PHD thesis: IMEN UKM: Label-Free Bioparticles Detection Using Lab-on-Chip, (External Examiner)
  57. (2016) UPM Master thesis: Image Processing Techniques Based on Intel Edison Platform To Cope color Vision Deficiency in Detecting in Detecting Pork Adulteration Visually, (External Examiner)
  58. (2016) IEEE Transactions on Electron Devices: Effect of Si-cap layer on Si(1 x)Gex p-channel 7-nm FinFET for variable Ge mole fraction, (Reviewer)
  59. (2016) DEVELOPMENT OF A MICROFLUIDIC DEVICE FOR SINGLE CELL/PARTICLE TRAPPING FOR THE POTENTIAL OF SINGLE CELL CHARACTERIZATION, (External Examiner)
  60. (2016) CREST Research and Development Evaluator, (Reviewer)
  61. (2016) USM master thesis:Design of 0.13 m CMOS 3-stage cascade DC/DC down converter for battery operated device, (External Examiner)
  62. (2015) Thesis, Msc UPM.Integration of Sigma Delta Analog to Digital Converter with Sinc Filter in FPGA, (External Examiner)
  63. (2015) Thesis, MSc, UPM. CMOS Potentiostat, (External Examiner)
  64. (2015) 2015 IEEE Regional Symposium on Micro and Nanoelectronics (IEEE-RSM2015) , (Reviewer)
  65. (2015) MSc Thesis, UKM.Rekabentuk dan fabrikasi Penggerak Mikro Elektromagnetik Menggunakan Gegelung Satah berasaskan PCB, (External Examiner)
  66. (2015) A 0.13 m CMOS Reconfigurable PCSNIM LNA for Multi Standard 0.9,1.8 and 2.1 GHz Mobile Application. MSc Thesis.USM, (External Examiner)
  67. (2014) IMPLEMENTATION OF HIGH SPEED DIRECT DIGITAL FREQUENCY SYNTHESIZER BASED ON NOVEL COMBINATIONAL LOGIN CIRCUIT ROM DESIGN,UKM phd thesis , (External Examiner)
  68. (2014) Self biasing Multi-gated transistor to improve the linearity of LNA and GM-C filter, UPM MSc Thesis, (External Examiner)
  69. (2014) Charge-Modulated Field Effect Transistor based Biosensor for Label-Free Deoxyribonucleic Acid Detection, MSc UTM Thesis, (External Examiner)
  70. (2014) Ref.: Ms. No. WSPC-JCSC-D-13-00456 EXPLORING AND EXPLOITING QUANTUM-DOT CELLULAR AUTOMATA FOR IMPLEMENTING FULL-ADDER Journal of Circuits, Systems, and Computers, (Reviewer)
  71. (2014) UPM Master thesis: Design of piezoelectric micropump for a constant flow process. , (External Examiner)
  72. (2014) Design of a Capacitive Sensing for Measurement of Water Content in Crude Oil: UTP, (External Examiner)
  73. (2014) Design of Ring Oscillator Based VCO and Frequency Divider for Active RFID Transponder:UKM, (External Examiner)
  74. (2014) PENILAI POSTER PROJEK TAHUN AKHIR DI UKM 2014, (External Examiner)
  75. (2014) Persidangan Eduresearch 2014 Kolej Komuniti, (External Examiner)
  76. (2014) 2014 Innovation and Invention Competition Through Exhibition, Sultan Abdul Halim Mu'adzam Shah Polytechnic, (Jury panel)
  77. (2014) JTAP-D-14-00100, "First-Principles Study of the Effect of Defects on Performance of Single-Molecule Pentacene Field Effect Transistors".Journal of Theoretical and Applied Physics (JTAP), (Reviewer)
  78. (2014) Master of Science, Plating- via-Stub Termination On High Speed Signal Integrity, (External Examiner)
  79. (2014) Master of Science, Unit Testing for PCI in Platform in Controller hub (PCH) BIOS , (External Examiner)
  80. (2014) Master of Science, Design of Multiply- by - two amplifier for 1-5 Bit Pipelined ADC application , (External Examiner)
  81. (2014) Monitoring and control of ACPDB through sound card based SCADA system, (External Examiner)
  82. (2013) Manuscript: TED-2013-04-0438-R Title: "Spin Transport in Bilayer Graphene Armchair Nanoribbon: A Monte Carlo Simulation Study" Authors: Salimath, Akshaykumar; Ghosh, Bahniman IEEE Transactions of Electron Devices (ISI Q1), (Reviewer)
  83. (2013) `A novel immersion method of nano-cubic structured ZnSnO3/ZnO based thin film for Humidity Sensor Application' International Journal of Electrical & Electronic Systems Research (IEESR) Vol 6 June 2013 , (Reviewer)
  84. (2013) Simultaneous switching noise impact to signal sensitivity on high speed I/O , (External Examiner)
  85. (2013) IEEE Transaction of Electron Devices :High Speed and Low power Ultra-Deep-Submicron III-V Hetero -Junctionless Tunnel Field Effect Transistor, (Reviewer)
  86. (2013) Title: "Model of Voltage Dependent Degradation of HfSiON/SiO2 nMOSFETs under Positive Bias Temperature Instability" Authors: Kim, Cheolgyu; Kim, Dongwoo; Lee, Seonhaeng; Kang, Bongkoo. IEEE Electron Devices Letter , (Reviewer)
  87. (2013) Development and characterization of integrated surface acoustic resonator CMOS, (External Examiner)
  88. (2012) Materials Science in Semiconductor Processing (ELSEVIER SCIENCE) :Dependence of annealing on Stability of transparent amorphous InGaZnO thin film transistor Materials Science in Semiconductor Processing , (Reviewer)
  89. (2012) ICIAS2012("Wideband Voltage Source with Flexible Gain and Controllable Feedback Current for EIT Systems") , (Reviewer)
  90. (2012) examination of PhD thesis "Characterisation of 3C-SiC membranes for advanced applications" , (External Examiner)
  91. (2012) Materials Science in Semiconductor Processing : Using Grey relational analysis to determine wet chemical etching parameters in through-silicon via etching application, (Reviewer)
  92. (2012) 4th International Conference on Intelligent and Advanced Systems.("Flow Analysis of Microfluidic-Based Acoustic Sensor"), (Reviewer)
  93. (2012) 4th International Conference on Intelligent and Advanced Systems.("Differential Ring Oscillator Based Voltage Control Oscillator for Readerless RFID Transponder"), (Reviewer)
  94. (2012) Ms. Ref. No.: MSSP-D-12-00091 Title: Elimination of impurities from the surface of silicon using HCl and HNO3 acids Materials Science in Semiconductor Processing , (Reviewer)
  95. (2012) ICIAS2012("Wideband Voltage Source with Flexible Gain and Controllable Feedback Current for EIT Systems") , (Reviewer)
  96. (2012) ICIAS2012("Wideband Voltage Source with Flexible Gain and Controllable Feedback Current for EIT Systems") , (Reviewer)
  97. (2011) IIUM RESEARCH, INVENTION AND INNOVATION EXHIBITION 2011 (IRIIE 2011) INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA Date/Day: 10th February 2011/ Thursday Venue: Cultural Activity Centre, IIUM, Gombak, (Judge)
  98. (2011) March-Based diagnosis algorithm for SRAM stuck at faults and transition faults, (External Examiner)
  99. (2011) A study of the effect of post-metal etch wet cleaning processes and silicon oxynitride film on charge-induced corrosion of tungsten vias,Materials Science in Semiconductor Processing (ISI Journal), (Reviewer)
  100. (2011) A noise methodology at reduced pessimism on long metals using dAP Model , (External Examiner)
  101. (2011) The effect of doping on the performance of porous silicon solar cells. Journal of Materials Science in Semiconductor Processing , (Reviewer)
  102. (2011) Design and simulation of vertical strained Si GE Impact Ionization MOSFET (VESIMOS). Universiti Malaysia Sabah, (External Examiner)
  103. (2011) HIGHLY SENSITIVE TIMER-BASED RESISTANCE DEVIATION TO TIME CONVERTER (IIUM Journal), (Reviewer)
  104. (2011) Design and analysis of a first order sigma to delta converter with CMOS-MEMS differential capacitive sensor, (External Examiner)
  105. (2011) Development of MEMS Piezoelectric Energy Harvesting Device for wireless conditioning monitoring. Islamic International University, (External Examiner)
  106. (2010) Design of capacitive measuring systems for high frequency band sensor transducer, (External Examiner)
  107. (2010) Design and implementation of biosensor with integrated impedance and mass sensing (IIUM), (External Examiner)
  108. (2010) Master Sains - Amad Ud Din (GS23618) Design of the standard CMOS ToF pixel CTE method (UPM), (External Examiner)
  109. (2010) "Design and Implementation of Potentiometer-Based Nonlinear Transducer Emulator" for IIUM ENGINEERING JOURNAL,, (Reviewer)
  110. (2010) Akademi Sains Malaysia ASM Science Journal, (Reviewer)
  111. Evaluation of magnetic properies under two dimensional magnetization , (Internal Examiner)
  112. Magnetic Flux density using FEM Method: Case of voltage drop condition for distribution cable network. , (Internal Examiner)
  113. TECHPOS Conference 2006 Universiti Malaya. Design and Optimization of Integrated MOS Varactors for High Tunability RF Circuits in CMOS Technology. Harikrishnan Ramiah, Tun Zainal Azni Zulkifli, Siva Kumar Palaniappan , (Reviewer)
  114. Microchip Design training Course (AMTDC) program assigned by Ministry of Education Audited Center: Amica Technologies Corporation UPM-MTDC Technology Incubation Centre Date : October 2000 , (Advisory Committee)
  115. Design of Adaptive Pipelined Arbiter for SoC Buses.Electronics and Telecommunications Research Institute International Journal , (Reviewer)
  116. "TEMPERATURE CONTROL CIRCUIT FOR SURFACE ACOUSTIC WAVE (SAW) RESONATORS" for IIUM ENGINEERING JOURNAL, (Reviewer)
  117. Special issues of the Journal of Analog Integrated Circuits and Signal Processing (ISI Journal) Title: Study of non-linear sensitivity of a capacitive type accelerometer by using compensation beam Author:Agus santoso Tamsir and Burhanuddin yeop majlis Date::July 2004 , (Reviewer)
  118. Institute of Engineer Malaysia Journal.Digital Circuit Structure Design Via Evolutionary Algorithm Method.(February 2007) , (Reviewer)
  119. Institute of Engineer Malaysia Journal.Tuning of PID controller on antenna positioner (May 2006) , (Reviewer)
  120. Design of multiband antenna for communication , (Internal Examiner)
  121. The effects of annealing,temperature and humidity on tin whiskers formation
  122. Fillet Heifht Failure on Low K PBGA Packages , (Internal Examiner)
  123. Special issues of the Journal of Analog Integrated Circuits and Signal Processing (ISI Jounal) Title: Dynamic identification of mems by eigensensitivity and newmark simulation Author:Joannes van der Poel Filho, Antonio Gugliotta, Aurelio Som Renato Pavanello Date::July 2004 , (Reviewer)
  124. IEEE Transaction on Electron Devices "An Easily Implementable Approach to Increase the Energy Capability of DMOS Transistors" , (Reviewer)
  125. Microelectronics Journal (ISI Journal) Title: Low power and high gain current reuse LNA with modified input matching and interstage inductors Author:S. Toofan, A. Abrishamifar, A. R. Rahmati and G. Roientan Lahiji Date::Mac 2008 , (Reviewer)
  126. Microelectronics Journal (ISI Journal) Title: New implementation of highly linear LNA using derivative superposition method. Author:Shuguang han, baoyong Chi and Zhihua Wang Date::April 2008 , (Reviewer)
  127. TECHPOS Conference 2006 Universiti Malaya. Simulation of Shallow Junctions Formation by Dopant Diffusion from SOD into Silicon through Polysilicon Layer. Nik Hazura N. Hamat, Ibrahim, Uda Hashim and Burhanuddin Yeop Majlis
  128. TECHPOS Conference 2006 Universiti Malaya. Development of Silicon Single Electron Transistor in Viewpoint of Design and Fabrication Technology. Sutikno, Uda Hashim and Zul Azhar Zahid Jamal
  129. TECHPOS Conference 2006 Universiti Malaya.Electrical characterization on 0.13um cmos devices induced by locos and sti isolation techniques using athena and atlas Muammar Mohamad Isa, Ibrahim Ahmad and Burhanuddin Yeop Majlis
  130. TECHPOS Conference 2006 Universiti Malaya Characterization of ultra-thin gate oxide using afm. Mohd Faiz Aizad Abdul Fatah, Ibrahim Ahmad and Uda Hashim, Burhanuddin Yeop Majlis , (Reviewer)
  131. MIMOS Symposium 2006. Analysis on ISFET chemical sensor by using Ag/AgCl reference electrode. , (Scientific Committee)
  132. Institute of Engineer Malaysia Journal.Nano-sided MN203 prepared by a novel solvolysis route as an electrochemical capacitor electrode material (January 2008) , (Reviewer)
  133. Institute of Engineer Malaysia Journal.Investigation of detection schemes for subcarrier multiplexed spectral-amplitude coding optical CDMA technique in point to point transmissions.(September 2006) , (Reviewer)
  134. M.Sc Thesis : Beh Yong Hooi Process optimization in the semiconductor die bond. July 2006. , (Internal Examiner)
  135. M .Eng Thesis : Yong Yoong Hooi Gate oxide integrity 0.18 um and 0.13 um silicon processing technology. May 2006. , (Internal Examiner)
  136. 2010 International Conference on Electronic Devices, Systems & Applications 1. A New 7-Transistor SRAM Cell Design with High Read Stability. 2. Power Analysis of Distributed Differential Oscillator. 3. A Novel Technique for Tuning Low Voltage Linear Transconductor , (Reviewer)
Contribution to external organisation
  1. (2022) Selection for Undergraduate-Student IEEE Electron Devices Society Scholarship, International, (Technical Advisor)
  2. (2021) Speaker of Webinar: Essential Skills to Secure Industry and International Research Grant, University, (Technical Advisor)
  3. (2021) Panelist for International Women Day Virtual Session, National, (Resource Person)
  4. (2021) Technical Regiona Chair, International, (Resource Person)
  5. (2021) Let S Make Green Electronics Online Workshop Program With California Berkeley University Us, International, (Technical Advisor)
  6. (2020) Supervisory Skill in Research Workshop, KPJ Healthcare University College (KPJUC), National
  7. (2020) NURSING & INNOVATION WEBINAR , KPJ Healthcare University College
  8. (2020) Advising research activities, Institute of Microengineering and Nanoelectronics
  9. (2020) IEEE International Conference on Semiconductor Electronics (ICSE) 2020, IEEE
  10. (2020) Lets Talk program, IEEE Electron Devices Society, International
  11. (2020) External examiner of Diploma in electronic engineering ( Microelectronics) program, MARA-Japan Industrial Institute
  12. (2020) Associate Principle Research Fellow, Institute of Microengineering and Nanoelectronics (IMEN) UKM, National
  13. (2020) Technical Committee, EDTM 2020. ELECTRON DEVICES TECHNOLOGY AND MANUFACTURING CONFERENCE. IEEE, International
  14. (2020) Editor, International Journal of Electrical & Electronic Systems JEESR, International
  15. (2020) Jawatankuasa Kesepakaran Kenaikan Pangkat Profesor VK 7 , Fakulti Kejuruteraan dan Alam Bina Universiti Kebangsaan Malaysia, National
  16. (2020) Sabatical leaves program, Institute of Microengineering and Nanoelectronics, National
  17. (2020) External Assessor, Promotion for Academic Staff International Islamic University Malaysia (IIUM), National
  18. (2019) Postgraduate Program External Examiner UNIMAP, School of Microelectronics, UNIMAP
  19. (2019) Innovation workshop program, Institute of Health Training ATM
  20. (2019) Panel Temuduga Hadiah Anugerah Alumni Universiti Malaya (Singapura) (HAUM), Alumni Universiti Malaya (Singapura)
  21. (2019) Postgraduate EE Program External Examiner UTEM, Fakulti Kejuruteraan Elektronik & Kejuruteraan Komputer (FKEKK) UTeM
  22. (2019) External examiner of Electrical Engineering Certificate Program, Kolej Komuniti Sabak Bernam, KPT
  23. (2019) International Conference for Innovation in Biomedical Engineering & Life Sciences 2019, International Conference for Innovation in Biomedical Engineering & Life Sciences 2019
  24. (2019) Phd VIVA meeting for LOKESH ANAND A/L VIJAYAKUMARAN (KHA130116) , Faculty of Engineering University Malaya
  25. (2019) International Conference for Innovation in Biomedical Engineering & Life Sciences 2019, International Conference for Innovation in Biomedical Engineering & Life Sciences 2019
  26. (2019) Research, Institute of Microengineering and Nanoelectronics (IMEN) UKM
  27. (2019) research, Institute of Microengineering and Nanoelectronics (IMEN) UKM
  28. (2019) Technical and community activities planning in Electron Devices scope, IEEE Electron Devices Malaysia Chapter
  29. (2019) Panel Pemilih Hadiah Anugerah Alumni Universiti Malaya (Singapura) (HAUM) sesi 2018/2019 dan 2019/2020, University of Malaya
  30. (2019) Electron Devices Society Malaysia Chapter, IEEE
  31. (2019) ADEC Emerald Supervision Program, ADEC UM, University
  32. (2019) Invited Speaker for IR 4.0 Seminar, KPJ Univ College, National
  33. (2019) Biosensor Seminar, IEEE Electron Devices Malaysia Chapter, National
  34. (2019) Technical Committee: Reliability Track, IEEE Electron Devices Technology and Manufacturing Conference (EDTM) 2019,Singapore, International
  35. (2018) Graduate Employability study, Faculty of Engineering
  36. (2018) Regional Publicity Chair, International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA) ,Singapore, International
  37. (2018) Guest speaker, SEMICON South East Asia 2018: IC failure Analysis and Defect characterisation Forum, International
  38. (2018) Co Chairman, 2018 IEEE International Conference on Semiconductor Electronics (IEEE-ICSE2018), International
  39. (2018) workshop:EFFECTIVE PRACTICE IN POSTGRADUATE SUPERVISION, Academic Enhancement and Leadership Development Centre (ADeC)
  40. (2018) Co Chair, IEEE INTERNATIONAL NANOELECTRONICS CONFERENCE INEC 2018, International
  41. (2017) Workshop: Effective Practice in Postgraduate Supervision, Universiti Putra Malaysia, University
  42. (2017) Workshop: Effective Practice in Postgraduate Supervision, University Malaysia Terengganu, National
  43. (2017) Activities of IEEE Electron Devices Malaysia Chapter, Electrin Devices Society IEEE Malaysia Chapter
  44. (2016) Planning and implementation of all activities of IEEE Electron Devices Society Malaysia Section, IEEE Electron Devices Society
  45. (2016) Organizing International Conference, International Conference on Bio-engineering for Smart Technologies (BioSMART 2016),
  46. (2016) research talk, UTM
  47. (2016) Regional Publicity Chair, 23rd International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA 2016), International
  48. (2016) Logistic Chair, 2016 IEEE International Conference on Semiconductor Electronics, International
  49. (2016) Session Chair, MEMS Technology, IEEE 2016 International Conference Semiconductor Electronics, International
  50. (2016) Speaker for Supervisory skills workshop and research talk, Universiti Malaysia Pahang, University
  51. (2016) Bengkel Pembudayaan Penyelidikan Kolej Komuniti Sabak Bernam, Kementerian Pengajian Tinggi
  52. (2015) Research Mentoring Program: Islamic International University Malaysia, Ministry of Higher Learning, National
  53. (2015) Research Development Program for College Community, Ministry of Higher Learning, National
  54. (2015) Program Penilaian Prestasi Pensyarah Kolej Komuniti, Kementerian Pengajian Tinggi, National
  55. (2015) Scientific Research development Program, KPJ Healthcare University College, National
  56. (2015) Plenary speaker:2015 4th International Conference on Electronic Devices, Systems and Applications, Universiti Teknologi Mara (UiTM), Shah Alam, Malaysia and American University of Ras Al Khaimah (AURAK), UAE
  57. (2015) Research Mentoring Program: UTEM, Malacca, Ministry of Higher Learning, National
  58. (2015) 2015 IEEE Regional Symposium on Micro and Nanoelectronics, IEEE Electron Device Chapter
  59. (2015) 6th Asia Symposium on Quality Electronic Design (ASQED 2015), IEEE
  60. (2015) Activities of IEEE Electron Devices Malaysia Chapter, IEEE Electron Devices Malaysia Chapter
  61. (2015) 2015 INTERNATIONAL CONFERENCE FOR INNOVATION IN BIOMEDICAL ENGINEERING AND LIFE SCIENCES (ICIBEL 2015), Malaysian Society of Medical and Biological Engineering (MSMBE)
  62. (2014) 11th 2014 IEEE International Conference in Semiconductor Electronics, IEEE Electron Devices Society, Malaysia Chapter
  63. (2014) Printable Electronics for mobile Healthcare, CREST - University of Cambridge- University Of Malaya Project, International
  64. (2014) Member of Editorial Board, ASEAN Engineering Journal, AUNSEED-Net, International
  65. (2013) Panel of Research and Innovation Seminar, Ministry of Education: Department of Community College Studies, National
  66. (2013) Planning and implementation of all activities of IEEE Electron Devices Society Malaysia Section, IEEE Electron Devices Society
  67. (2013) Organizing conference, IEEE Asia Symposium of Quality Electronic Design
  68. (2013) Organizing conference, IEEE Electron Devices Malaysia Chapter
  69. (2013) Workshop on Research Methodology Phase II, Mara Japan Industrial Institute, University
  70. (2013) Speaker for Greenday program, MOHE: Jabatan Pengajian Politeknik, National
  71. (2013) Workshop on Research Methodology Phase I, Mara Japan Industrial Institute, University
  72. (2013) Workshop on Research Methodology, Universiti Sultan Zainal Abidin, UniSZa Trengganu, National
  73. (2012) Board Member of Studies:Master of Science Degree Program in Electronic Engineering, International Islamic University Malaysia
  74. (2012) Moderator, SEGI College, National
  75. (2012) Committee member of 2012 IEEE EMBS CONFERENCE ON BIOMEDICAL ENGINEERING AND SCIENCES , 2012 IEEE EMBS CONFERENCE ON BIOMEDICAL ENGINEERING AND SCIENCES
  76. (2012) 2012 Asia Symposium of Quality Electronic Design , International Symposium of Quality Electronic Design
  77. (2012) Invited speaker for academic talk, Universiti Sultan Zainal Abidin, Trengganu, University
  78. (2011) Journal reviewer, Ms. Ref. No.: MSSP-D-10-00039R1 Title: Characteristics of Germanium Dry Etching by Using Inductively Coupled SF6 Plasma Materials Science in Semiconductor Processing
  79. (2011) Conference, Appointment as Committee Member: 2011 IEEE Regional Symposium on Microelectronics (RSM2011)
  80. (2011) Organizing conferences/workshops/trainings related to semiconductor electronics, IEEE Electron Devices
  81. (2011) Journal Evaluation:Template based synthesis and electrical characterization of nano/micro structures of iron and copper on Silicon substrate, Materials Science in Semiconductor Processing, Elsevier Science
  82. (2011) Committee Member, The 3rd Asia Symposium on Quality Electronic Design (ASQED 2011), International
  83. (2011) DISCUSSION ON SEMICONDUCTOR DEVICE STANDARDISATION, Jabatan Standard, SIRIM Bhd
  84. (2010) Preparation of National Roadmap for MEMS Sensor 2012, MIMOS BHD
  85. (2010) VLSI Training for Trainer for program Phase 3, INTEL MDEC, National
  86. (2010) VLSI Training for Trainer Program Phase 4, INTEL, National
  87. (2010) Journal Reviewing 'Controllable silicon nano-grass formation using hydrogenation assisted deep reactive ion etching', Materials Science in Semiconductor Processing (ISI Journal)
  88. (2010) Roadmap preparation, MIMOS BHD, National
  89. (2009) Regional Symposium on Micro and Nano Electronics (IEEE-RSM2009) , IEEE Malaysia Section
  90. (2009) VLSI Training for Trainer Program 2nd Phase, INTEL MDEC, National
  91. (2009) INTERNATIONAL CONFERENCE FOR TECHNICAL POSTGRADUATES (TECHPOS 2009) , University Malaya and IEEE Malaysia Section
  92. (2009) IEEE International Conference on Semiconductor Electronics , IEEE Malaysia Section
  93. (2009) Research Seminar, Engineering Society's Study Scheme,ESOSS, (Engineering Society of university malaya)
  94. (2008) Jawatankuasa Kebangsaan teknologi Sensor dan MEMS, MOSTI, University
  95. (2008) Fellow Researcher, Institute of Microengineering and Nanoelectronics (IMEN) UKM , National
  96. (2008) Journal reviewer, Microelectronic Journal , Elsevier Science, International
  97. (2008) National industry expert, Department of Skills Development, Ministry of Human Resources Malaysia., National
  98. (2008) Preparation of National Roadmap for MEMs Sensor and nanotechnology, MOSTI
  99. (2008) Article Reviewing, MIMOS 2006 Symposium, MIMOS Sdn BHD
  100. (2008) Journal reviewing, Microelectronic Engineering Journal, Elsevier Science.
  101. (2007) Development of microelectronic sub-sector Occupational field analysis , Department of Skills Development, Ministry of Human Resources Malaysia
  102. (2007) National Industry Expert, Ministry of Human Resource, Malaysia
  103. (2006) Journal reviewing, Institute of Engineers Malaysia
  104. (2006) Research in MEMS technology, Institute of Microengineering and Nanoelectronics IMEN, UKM
  105. (2006) Fellow Researcher, Institute of Microengineering and Nanoelectronics (IMEN) UKM, National
  106. (2006) Coordinator, Microelctronic Consortium - USM, National
  107. (2006) Internal Examiner for M. Eng program, University of Malaya, University
  108. (2006) Internal Examiner for M. Science, Universiti of Malaya, University
  109. (2006) Working Group on semiconductor devices- preparation of standard, SIRIM Bhd, National
  110. (2006) Committee - Development of microelectronic sub-sector Occupational field analysis, Department of Skills Development, Ministry of Human Resources Malaysia., National
  111. (2006) Journal Reviewer, IEM Malaysia, National
  112. (2006) Reviewer, MIMOS Symposium, National
  113. (2005) Preparation of National Roadmap for MEMS Technology, MIGHT,Malaysian Industry-Government Group for High Technology (MIGHT).
  114. (2005) Working Group on semiconductor devices- preparation of standard, SIRIM BHD
  115. (2005) Reviewer, TechPos 05 Conference, Universiti of Malaya, National
  116. (2005) Commitee, Government Group for High Technology (MIGHT) Interest Group- Microelectromechanical Systems (MIG-MEMS, National
  117. (2005) Coordination of IC design activities, National Consortium of IC design, CEDEC, USM.
  118. (2004) Reviewer, Special issues of the Journal of Analog Integrated Circuits and Signal Processing.Elsevier Science , International
  119. (2000) Auditor For Microchip Design training Course (AMTDC) program, Ministry of Education, National
Contribution to event
  1. (2023) Speaker: "3d Printing and Additive Manufacturing; Cleft Palate Focus", National, (Event Organiser)
  2. (2023) Speaker: Emerald Research and Supervision (Adec), University, (Course Facilitator)
  3. (2023) Speaker: Grooming Research Experts for Ir 4.0 ( Unisza), National, (Course Facilitator)
  4. (2022) Speaker :Emerald Research and Supervision (Adec), University, (Course Facilitator)
  5. (2022) Speaker : Bengkel Pemantapan Penulisan Geran Penyelidikan, National, (Course Facilitator)
  6. (2022) Speaker: Emerald Research and Supervision (Adec), University, (Course Facilitator)
  7. (2022) Speaker: Effective Research Supervision Skills (Unisza), National, (Course Facilitator)
  8. (2022) Speaker: Research Grant Management Workshop Unimas, National, (Course Facilitator)
Mentoring
  1. (2021) Speaker At Kpj University Collegue: Workshop On Research Grant Proposal, National, (Mentor)
  2. (2021) Invited Speaker for Research and Deveopment of Av-Politeknik Behrang (Psas) & Introduction to IEEE Eds, National, (Mentor)

SUPERVISION

Postgraduate Student
PhD/ Doctoral
  1. (2023) Design and Fabrication of an Integrated Sensor on Flexible Enzyme-based Substrate for Glucose Monitoring, Fazliyatul Azwa Md Rezali
  2. (2022) A Stable Physical Unclonable Function Model as an Integrated Circuit’s Identity and Security, ZULFIKAR
  3. (2021) DEVELOPMENT OF TECHNIQUES FOR IN-SITU MONITORING STRESS-INDUCED DEGRADATION AND POTENTIAL SOLUTIONS FOR FPGA, ANUAR BIN JAAFAR
  4. (2021) DESIGN OF HIGH SENSITIVE PRESSURE SENSOR FOR ICP MEASUREMENT, MAZITA BINTI MOHAMAD
  5. (2021) QUALITY FACTOR IMPROVEMENT OF ON-CHIP MEANDER LINE RESISTOR IN HIGH FREQUENCY OPERATION, WONG GOON WENG
  6. (2017) Development and analysis of a flapping mechanism for Biomimetic Micro Air Vehicle, CHRISTOPHER JAMES FEARDAY
  7. (2015) DEVELOPMENT OF POWER MOSFET STRUCTURE WITH DEVICE FIGURE OF MERIT ENHANCEMENT., KE KIAN SENG JOSEPH
  8. (2015) DESIGN OF HIGH SENSITIVE PRESSURE SENSOR FOR ICP MEASUREMENT, MAZITA BINTI MOHAMAD
  9. (2015) CONTROLLED GROWTH OF CARBON NANOTUBES (CNT) AND FABRICATION OF CNT MEMS INTRACRANIAL PRESSURE (ICP) SENSOR, SITI HAJAR BINTI ABD RAHMAN
  10. (2014) DEFECTIVITY IMPROVEMENT IN ADVANCED PROCESSES AND ITS INVESTIGATION TO NEGATIVE BIAS TEMPERATURE INSTABILITIES IN HIGH-K/METAL-GATE DEEP-SUBMICRON CMOS, Yasmin Abdul Wahab
  11. (2014) THE EFFECT OF NEGATIVE BIAS TEMPERATURE INSTABILITY DEGRADATION (NBTI) ON 40NM FIELD PROGRAMMABLE GATE ARRAY, ANUAR BIN JAAFAR
  12. (2014) SIMULATION FRAMEWORK OF NBTI DEGRADATION IN NANO-SCALE p-MOSFETS FROM THE PERSPECTIVE OF HYDROGEN AND NON-HYDROGEN TRANSPORT FORMALISM, Hanim Husin
  13. (2013) probing technique for energy distribution of positive charges in gate dielectric and its application to lifetime prediction, SHARIFAH FATMADIANA WAN Muhd hatta
  14. (2013) IMPROVED DESIGN OF ON-CHIP RESISTOR FOR RADIO FREQUENCY APPLICATIONS, WONG GOON WENG
  15. (2012) A FLAPPING WING MECHANISM TO TAKS ADVANTAGE OF UNSTEADY AERODYNAMICS, CHRISTOPHER JAMES FEARDAY
  16. (2011) AGING, VARIATION AND POWER AWARE CLOCK DISTRIBUTION DESIGN, TENG SIONG KIONG
  17. (2011) Study of NBTI on Analog integrated circuits, Nissar Abdul Karim
  18. (2011) NEGATIVE BIAS TEMPERATURE INSTABILITY AND PERMITTIVITY DEPENDENT DELAY MITIGATION IN HIGH-K METAL OXIDE COMPATIBLE CMOS DIELECTRIC, NISSAR MOHAMMAD KARIM
  19. (2011) Defectivity improvement in advanced processes and its investigation to negative bias temperature instabilities in high-k/metal-gate deep-submicron CMOS., YASMIN BINTI ABDUL WAHAB
  20. (2010) SIMULATION FRAMEWORK OF NBTI DEGRADATION IN NANO-SCALE P-MOSFETS FROM THE PERSPECTIVE OF HYDROGEN AND NON-HYDROGEN TRANSPORT FORMALISM, HANIM BINTI HUSSIN
  21. (2010) VALVELESS BI-DIRECTIONAL MICRO-PUMPS FOR BIOMEDICAL APPLICATIONS ON CENTRIFUGAL MICROFLUIDIC PLATFORMS, THIO TZER HWAI GILBERT
  22. (2009) Probing Technique for Energy Distribution of Positive Charges in Gate Dielectrics and Its Application to Lifetime Prediction, SHARIFAH FATMADIANA BINTI WAN MUHAMAD HATTA
  23. (2009) VLSI (On Chip Interconnection Technology), New Chin-ee (University of Malaya (UM))
  24. (2007) Circular Patch Microstrip Array Antenna (CPMAA) for KU-band Satellite TV Receiver, Lai Tian fat (University of Malaya (UM))
Master
  1. (2020) Design, simulation and construction of readout circuit for multi biosensors, TAN JIA PEI
  2. (2016) DEGRADATION ANALYSIS BASED ON DESIGN CONSIDERATIONS OF ADVANCED-PROCESS MOSFETS, AINUL FATIN BINTI MUHAMMAD ALIMIN
  3. (2015) THE EFFECTS OF PROCESS VARIATIONS ON N-TYPE AND P-TYPE FINFET, NURUL AIDA FARHANA BINTI OTHMAN
  4. (2014) PERFORMANCE OF ADVANCED-PROCESS AND MULTI-GATED MOSFETS BASED ON GEOMETRIC AND PROCESS DESIGN CONSIDERATIONS, FAZLIYATUL AZWA BINTI MD REZALI
  5. (2014) NEGATIVE BIAS TEMPERATURE INSTABILITY ANALYSIS ON MULTI-GATE MOS DEVICES, AINUL FATIN BINTI MUHAMMAD ALIMIN
  6. (2011) Lateral Diffused Metal Oxide Semiconductor (LDMOS) Transistor Safe Operating Area (HCI-SOA) Characterization Under Hot Carrier Injection, SHARIFAH SHAFINI SYED SHAHABUDDIN
  7. (2011) MULTI CHANNEL COMPATIBLE SINGLE CHIP RFID READER, SADIA MANZOOR
  8. (2011) Study of Safe operating area of advanced transistors, SHARIFAH SHAFINI BT SYED SHAHABUDDIN
  9. (2011) CHARACTERIZING THE FAST INTERFACE PROPERTIES OF VERTICAL DOUBLE-DIFFUSED METAL-OXIDE SEMICONDUCTOR (DMOS) WITH CHARGE PUMPING METHOD, MOHD HANIF BIN KAMARUDDIN
  10. (2010) DESIGN OF CAPACITIVE SENSOR INTERFACING CIRCUIT USING 0.18MM COMPLIMENTARY METAL OXIDE SEMICONDUCTOR TECHNOLOGY, FATEMEH BANITORFIAN HOVEIZAVI
  11. (2010) DESIGN OF A TUNABLE CMOS ACTIVE INDUCTOR RADIO FREQUENCY BANDPASS FILTER, NUR DIYANA BINTI MOHD ASRI
  12. (2010) CHARACTERIZATION OF p MOSFEETS DEGRADATION IN NEGATIVE BIAS TEMPERATURE INSTABILITY TEST, SOON FOO YEW
  13. (2010) A TUNABLE 10TH ORDER COMPLEMENTARY METAL OXIDE SEMICONDUCTOR BAND PASS FILTER FOR WIRELESS APPLICATIONS, VEERAIYAH THANGASAMY
  14. (2009) Design and Development of Tuneable Filter for a Wireless Radio Transceiver., Nur Diyana Mohd Asri
  15. (2009) LOW POWER CLOCK TREE SYNTHESIS FOR ASIC VLSI DESIGN, TENG SIONG KIONG
  16. (2009) Development of passive UHF RFID transponder in 0.18 m CMOS technology, Dayanasari Abd Hadi (University of Malaya (UM))
  17. (2009) UHF RFID Tag Design to achieve Lower Power Consumption, PUTERI NOR AZNIE FAHSYAR BINTI SYED MAHADZIR
  18. (2009) Physical Aware Low Power Clock Gates Synthesis Algorithm for High Speed VLSI Design, Teng Siong Kiong
  19. (2009) NEGATIVE BIAS TEMPERATURE INSTABILITY (NBTI) STUDY ON PMOSFET DEVICE AND CIRCUIT RELIABILITY, DAYANASARI BINTI ABDUL HADI
  20. (2009) DESIGN OF ULTRA HIGH FREQUENCY (UHF) RFID TRANSPONDER CHIP IN 0.18 MICRO-METER (CMOS) PROCESS, PUTERI NOR AZNIE FAHSYAR
  21. (2008) STUDY ON LOW-POWER CAPACITIVE SENSING CIRCUIT FOR MEMS SENSOR, HUANG XIAOFANG
  22. (2008) CAPACITIVE INTERFACING FOR MEMS HUMIDITY AND ACCELEROMETER SENSORS, NORLIANA BINTI YUSOF
  23. (2008) RF MEMS capacitive switch, Amin Khalili Moghaddam
  24. (2008) QUALITY FACTOR CONSIDERATION FOR SUBSTRATE OF RF MEMS CAPACITIVE SWITCH ON SEMI-SUSPENDED CPW, AMIN KHALILI MOGHADDAM
  25. (2008) Modeling of SOI lateral double-diffused MOS(LDMOS) for RF applications, Norazian Mat Saad (University of Malaya (UM))
  26. (2008) MEMS Capacitive sensing circuit, Huang Xiao Fang
  27. (2008) MEMS Humidity Sensors, Norliana Yusof
  28. (2007) PRACTICAL DESIGN OF LOW POWER BANDGAP REFERENCE USING CMOS MIXED SIGNAL PROCESS, ASMAH BINTI TRUKY
  29. (2007) Antenna Design, Abdallah Ezzat Al-Kaffas
  30. (2007) Antenna design (RFID), Mohammad Awadh Obaid
  31. (2007) Practical Design of Low Power Bandgap Voltage Reference for CMOS 0.35 um Mixed Signal Process, Asmah Binti Truky (University of Malaya (UM))
  32. (2007) Development of MEMS biosensor for for Igm antibody detection in Serum of dengue patient, Nurul Aini Yusoff (University of Malaya (UM))
  33. (2007) MODELING OF A MICRO-DIAPHRAGM FOR OPTICAL PRESSURE SENSOR FOR HUMAN ARTERY PULSE WAVE DETECTION, KHAIRUNNISA BINTI HASIKIN
  34. (2007) PRACTICAL DESIGN OF CMOS POWER DEVICES AND CONTROL WITH ELECTROSTATIC DISCHARGE (ESD) SAFETY IN A LINEAR BATTERY CHARGER INTEGRATED CIRCUIT, KHAIRI BIN OMAR
  35. (2007) Development of a MEMS biosensor for human artery pulse wave detection, Khairunnisa Hasikin (University of Malaya (UM))
  36. (2006) Optimization of Q-factors of MEMS RF inductors, Sharudin Alias (University of Malaya (UM))
  37. (2006) Design And Simulation Of A Drug-Delivery MEMS Micropump For Medical Applications, Salmah Karman (University of Malaya (UM))
  38. (2006) Applications of Magnetic MEMS, Zaini Kamarudin (University of Malaya (UM))
  39. (2006) A Micro Power LNA on a standard 0.18μm CMOS utilizing Inter-Stage Series Resonance and Optimizing the Substrate Resistance, Sharifah Fatmadiana M. Hatta (University of Malaya (UM))
  40. (2006) DESIGN OF LOW VOLTAGE RF CMOS LOW NOISE AMPLIFIER FOR WIRELESS APPLICATION, SHARIFAH FATMADIANA BINTI WAN MUHAMAD HATTA
  41. (2005) STUDY ON ALIGNMENT CAPABILITY AND OVERLAY PERFORMANCE IN BACK-END OF LINE LITHOGRAPHY PROCESS FOR 130MM TECHNOLOGY, LAU SIAU YEN
  42. (2005) DEVELOPMENT OF HIGH PERFORMANCE MEMS MICROPUMP FOR INSULIN DELIVERY SYSTEM, SALMAH BINTI KARMAN
Others
  1. (2008) Modeling and simulation of advanced structure of, Norshahida Jaafar (University of Malaya (UM))
  2. (2007) Practical design and implementation of CMOS power and ESD safety devices for use in battery charger integrated circuit, Khairi Bin omar (University of Malaya (UM))
  3. (2005) Development Of An Intracranial Pressure, Emmanuel Tangiah (University of Malaya (UM))
Under Graduate Students
  1. (2022) Investigation on effects of Extended Gate FET (EGFET) geometrical structure on biosensor performance characteristics
  2. (2022) FEM Characterization of Stretchable Electrodes for Wearable Device
  3. (2022) Development of Flexible Ion-sensitive field effect transistors (ISFETs) for pH Sensor
  4. (2022) CHARACTERIZATION OF FLEXIBLE STRAIN SENSORS
  5. (2021) Investigation on effects of Extended Gate FET (EGFET) geometrical structure on biosensor performance characteristics
  6. (2021) FEM Characterization of Stretchable Electrodes for Wearable Device
  7. (2021) Development of Flexible Ion-sensitive field effect transistors (ISFETs) for pH Sensor
  8. (2021) Characterization of flexible strain sensors by finite element modeling approach
  9. (2007) Analogue IC design and MOSFETs reliability
  10. (2006) Analogue IC design and Mosfets reliability
  11. (2005) Short channel effect on MOSFETS
  12. (2000) MOSFETs Modeling
  13. (1999) Design of ALU and Short channel effects on MOSFETS

TEACHING

Master
  1. (2018) KQC7011 - Mems Technology
  2. (2017) KEEE2225 - Electronic Circuits Ii
  3. (2017) KQC7010 - Microelectronics Technology
  4. (2017) KXGK6302 - Microelectronics Technology
  5. (2014) KXGK6108 - Mems Technology
  6. (2014) KXGK6302 - Microelectronics Technology
  7. (2013) KXGK6108 - Mems Technology
  8. (2012) KXGK6302 - Microelectronics Technology
  9. (2009) Mems Technology
  10. (2009) KXGT6307 - Rf Mems Technology
  11. (2007) KXGT6307 - Rf Mems Technology
Bachelor/First Degree
  1. (2022) KIX1003 - Thinking and Communication Skills
  2. (2021) KIX1003 - Thinking and Communication Skills
  3. (2021) KIE4018 - Vlsi Design
  4. (2018) KIX1003 - Thinking and Communication Skills
  5. (2017) KEEE4425 - Microelectronics
  6. (2016) KIE1003 - Digital System
  7. (2014) KEEE4425 - Micro Electronic
  8. (2013) KEEW3224 - Vlsi Design
  9. (2010) KEEE4425 - Microelectronics
  10. (2010) KEEW3224 - Vlsi Design
  11. (2008) KEEE4426 - Vlsi
  12. (2008) KEEE4425 - Microelectronics
  13. (2008) KEEE1125 - Electronic Circuits
  14. (2007) KEEE1125 - Electronic Circuits
  15. (2007) KEEE4425 - Microelectronics
  16. (2007) KEEE4426 - Vlsi
  17. (2006) KEEE4426 - Vlsi
  18. (2006) KEEE4425 - Microelectronics
  19. (2006) KEEE1125 - Electronic Circuits
  20. (2001) KBEB1111 - Circuits Analysis I
  21. (2001) KEEE2222 - Electronics Ii
  22. (2001) KEEE1171 - Laboratory I

SOCIAL RESPONSIBILITY ACTIVITIES

  • Sponsorship Chair Conference for Innovation Biomedical Engineering and Life Sciences (Icibel 2022), (10 Dec 2022 - 13 Dec 2022) (National)
  • Training of B40 Students in Kuala Trengganu (Stem), (13 Nov 2022 - 13 Dec 2022) (National)
  • Stem4 Fun Fasilitator At Sekolah Menengah Mambau Negeri Sembilah, (28 Sep 2022 - 28 Sep 2022) (National)
  • Training of B40 School Students in Selangor (Stem), (19 Sep 2022 - 19 Sep 2022) (National)
  • Fasilitator Stem4fun At SMK Sek 7 Shah Alam Untuk 150 Pelajar Dari Sekolah -Seolah Daerah Petaling dan Klang., (19 Sep 2022 - 21 Sep 2022) (National)
  • IEEE Eds Thinkercad and Microbit Stem Program for The Indigenous Children in Malaysia, (21 Nov 2021 - 21 Nov 2021) (National)
  • IEEE Eds Malaysia'S Stem Program: My Journey On How I Became An Electronics Engineer? Speaker, (17 Oct 2021 - 17 Oct 2021) (National)
  • Eds IEEE Day 2021 Event: Tinkercad and Microbit Stem Programme for Sustainable Development Goals : Advisor, (10 Oct 2021 - 10 Oct 2021) (National)
  • Developing Curriculum for Electrical Engineering Program of Kolej Komuniti Sabak Bernam, (19 Dec 2019 - 19 Jan 2021)
  • Technical Talk On Industry 4.0 for Lecturers in Politeknik Ungku Omar, (23 Jul 2019 - 24 Dec 2019)
  • Promoting Excellence in The Field of Electron Devices for The Benefit of Humanity as a Chair of IEEE Electron Devices Society Malaysia Chapter.( Schools, Colleges, Universities, Industries), (19 Jan 2019 - 18 Jan 2021)
  • Mrsm Jasin Career and Technical Talk : The Wonders of Microchip Technology: Current and Future Applications, (02 Jan 2019 - 02 Jan 2019)
  • Mentoring Research Collaborative Effort for IEEE Electron Devices Malaysia Chapter in University Malaysia Sabah, (16 Nov 2017 - 17 Nov 2017)
  • Advisor of IEEE Electron Devices Society Research Field Trip to Ntu Singapore, (09 Jul 2017 - 11 Jul 2017)
  • Training Reliability Engineers in Silterra Malaysia Sdn. Bhd, Kulim, Kedah, (21 Apr 2017 - 21 Apr 2017)
  • Introduction of International Expertise in Semiconductor Reliablity to Silterra Malaysia Sdn. Bhd, (20 Apr 2017 - 20 Apr 2017)
  • Majlis Perasmian Mara-Japan Industrial Institute (Mjii) Beranang, Selangor, (29 Sep 2016 - 29 Sep 2016)
  • Engineering Research Development Program for Engineers in Silterra Malaysia Sdn. Bhd, (02 Aug 2016 - 02 Aug 2016)
  • Research Grant Application Initiative Between UM and Infineon Technologies , Kulim Kedah, (26 Sep 2014 - 26 Sep 2014)
  • Member of Farmer's Organization Authority, (01 Jan 2014 - 30 Jun 2015)
  • Penceramah Program Green Day : Energy for Consumer Politeknik Sultan Azlan Shah, Behrang, Perak, (04 Apr 2013 - 04 Apr 2013)
  • Wakil Akademik Untuk Pameran Pendidikan Tinggi 'Postgradasia" Klcc, (27 May 2012 - 27 May 2012)
  • Wakil Akademik Untuk Pameran "Karnival Jom Masuk UM" Dtc, UM, (18 May 2012 - 19 May 2016)
  • Liverpool John Moores University Alumni in Malaysia, (19 Feb 2011 - 31 Dec 2012)
  • New Program Development Team for Unimap, (16 Feb 2011 - 04 Mar 2011)
  • Judge of IIUM Research and Innovation Exhibition, (09 Feb 2011 - 10 Feb 2011)
  • Sirim Standards Development Committee in Semiconductor Devices, (02 Feb 2009 - 31 Dec 2013)
  • Academic Motivation Forum Sekolah Menengah Kebangsaan Serendah 48200 Selangor, (16 Aug 2007 - 16 Aug 2007)
  • National Industry Expert Department of Skills Development, Ministry of Human Resources Malaysia, (28 May 2007 - 27 May 2009)
  • Resident S Association of Taman Desa Melor Committe, 48200 Serendah, (01 Jan 2005 - 31 Dec 2005)
  • Asian Microelectronics 2003(Philipines) 'Microelectronics Research Acitivities in University of Malaya', (27 Aug 2003 - 29 Aug 2003)
  • Invited Speaker for Infineon Technical Seminar 2003 'Review On Mems Green Packaging and Reliability', (23 Jul 2003 - 23 Jul 2003)

COURSE ATTENDED

Internal / External Course
EXTERNAL COURSE
  1. INTEL ASIA ACADEMIC FORUM 2012, Penang (05 Nov 2012 - 06 Nov 2012)
  2. LEADERSHIP DEVELOPMENT TRAINING PROGRAM IN INDUSTRIAL TRAINING, Akademi Kepimpinan Pengajian Tinggi (Akept) (10 Jun 2013 - 12 Jun 2013)
  3. ADVANCE SEMICONDUCTOR RELIABILITY TRAINING, Melaka (18 Jan 2011 - 20 Jan 2011)
  4. 3RD PHASE OF THE INTEL-MDEC ADVANCED VLSI TRAIN-THE-TRAINER PROGRAM, Intel Penang (21 Jun 2010 - 26 Jun 2010)
  5. IEEE MALAYSIA SECTION: LEADERSHIP CAMP, Magic, Cyberjaya (09 Mar 2019 - 09 Mar 2019)
  6. THE 2ND EKWIP: EE KAIST WORKSHOP WITH INTERNATIONAL PARTNERS , Dajeon (22 Nov 2019 - 22 Nov 2019)
  7. CREST SYMPOSIUM 2013, Penang (09 Oct 2013 - 09 Oct 2013)
  8. 3 DAY INTENSIVE LEAD TRAINER COURSE ON OUTCOME BASED, Mariott Hotel Putrajaya (26 Mar 2011 - 28 Mar 2011)
  9. 4TH PHASE INTEL-MDEC ADVANCED VLSI TRAIN-THE-TRAINER PROGRAM , Intel Penang (22 Nov 2010 - 26 Nov 2010)
  10. 2 ND PHASE OF THE INTEL-MDEC ADVANCED VLSI TRAIN-THE- TRAINER PROGRAM, Intel Penang (07 Dec 2009 - 12 Dec 2009)
CONFERENCE
  1. 2013 IEEE REGIONAL SYMPOSIUM ON MICRO & NANOELECTRONICS, Pulau Langkawi. Kedah (25 Sep 2013 - 27 Sep 2013)
  2. 2014 IEEE CONFERENCE ON BIOMEDICAL ENGINEERING AND SCIENCES , Miri (08 Dec 2014 - 10 Dec 2014)
  3. 24TH ANNIVERSARY WORLD CONGRESS ON BIOSENSORS, Melbourne,Australia (26 May 2014 - 31 May 2014)
  4. 2018 IEEE INTERNATIONAL CONFERENCE ON SEMICONDUCTOR ELECTRONICS (ICSE), Pullman Klcc, Kuala Lumpur (15 Aug 2018 - 17 Aug 2018)
  5. 25TH INTERNATIONAL SYMPOSIUM ON THE PHYSICAL AND FAILURE ANALYSIS OF INTEGRATED CIRCUITS (IPFA 2018), Marina Bay Sands (15 Jul 2018 - 19 Jul 2018)
  6. INTERNATIONAL BURBAN CONFERENCE ON APPLIED SCIENCES AND TECHNOLOGY IBCAST 2020, National Center for Physics,Islamabad (13 Jan 2020 - 19 Jan 2020)
  7. IEEE ELECTRON DEVICES TECHNOLOGY AND MANUFACTURING (EDTM) CONFERENCE 2020 I, Equatorial Hotel, Penang (16 Mar 2020 - 18 Mar 2020)
  8. ASQED 2012 SYMPOSIUM, Eastin Hotel (10 Jul 2012 - 11 Jul 2012)
  9. 2017 IEEE REGIONAL SYMPOSIUM ON MICRO AND NANOELECTRONICS (IEEE-RSM2017) , Hotel Golden Sands, Batu Feringhi, Pulau Pinang (23 Aug 2017 - 25 Aug 2017)
  10. 24TH INTERNATIONAL SYMPOSIUM ON THE PHYSICAL AND FAILURE ANALYSIS OF INTEGRATED CIRCUITS ( IPFA 2017 ), Chengdu (03 Jul 2017 - 08 Jul 2017)
  11. INTERNATIONAL CONFERENCE ON BIO-ENGINEERING FOR SMART TECHNOLOGIES (BIOSMART 2016),, Dubai Uae (03 Dec 2016 - 08 Dec 2016)
  12. 2016 IEEE INTERNATIONAL CONFERENCE ON SEMICONDUCTOR ELECTRONICS (ICSE2016), Pullman Hotel, Bangsar (17 Aug 2016 - 19 Aug 2016)
  13. 2014 IEEE INTERNATIONAL CONFERENCE ON SEMICONDUCTOR ELECTRONICS (ICSE2014) , Kuala Lumpur (27 Aug 2014 - 29 Aug 2014)
  14. IPFA 2016, 23RD INTERNATIONAL SYMPOSIUM ON THE PHYSICAL AND FAILURE ANALYSIS OF INTEGRATED CIRCUITS, Marina Bay Sands (17 Jul 2016 - 21 Jul 2016)
  15. 2016 11TH IEEE INTERNATIONAL SYMPOSIUM ON MEDICAL MEASUREMENTS AND APPLICATIONS , Benevento (14 May 2016 - 19 May 2016)
  16. 18TH CONFERENCE OF INSULATING FILMS ON SEMICONDUCTORS, Krakow, Poland (23 Jun 2013 - 29 Jun 2013)
  17. 38TH INTERNATIONAL CONFERENCE ON MICRO AND NANO ENGINEERING, Toulouse (15 Sep 2012 - 18 Sep 2012)
  18. MESYUARAT PENYELIDIKAN KOLABORATIF, Singapura (03 May 2012 - 04 May 2012)
  19. 41ST MICRO AND NANO ENGINEERING CONFERENCE, World Forum,The Hague (20 Sep 2015 - 25 Sep 2015)
  20. ICAM 2015: XIII INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS, Jeddah (25 Jan 2015 - 28 Jan 2015)
COURSES ORGANIZED BY PTJ
  1. DELIVERING AN EFFECTIVE PRESENTATION, Ippp, University Malaya (12 Nov 2019 - 12 Nov 2019)
  2. PROGRAM TEAMBUILDING 2016, FAKULTI KEJURUTERAAN, Kem Bina Negara, Ulu Sepri, Rembau (18 Feb 2016 - 20 Feb 2016)
  3. POSTGRADUATE SUPERVISION, Adec Universiti Malaya (28 May 2013 - 28 May 2013)
  4. WORKSHOP : POSTGRADUATE SUPERVISION WORKSHOP, Training Room, Level 14, Wisma R & D (28 May 2013 - 28 May 2013)
  5. SPEAK WITH STYLE, Training Room 14-1 (12 Oct 2015 - 12 Oct 2015)
  6. BENGKEL KEPIMPINAN-A BREAKTHROUGH IN QUALITY MINDSET, Hotel Pullman Kuala Lumpur Bangsar (15 Dec 2014 - 15 Dec 2014)
RESEARCH
  1. IC RELIABILITY, (01 Aug 2011 - 31 Aug 2011)
  2. CMOS DEVICE RELIABILITY, (01 Dec 2010 - 31 Dec 2010)
  3. PENYELIDIKAN KOLABORASI DENGAN INEE UNIMAP, (10 Jan 2016 - 12 Jan 2016)
  4. FLEXIBLE ELECTRONICS : UM-CREST-CAMBRIDGE PROJECT, (04 Jan 2016 - 07 Jan 2016)
  5. PERJUMPAAN PENYELIDIK MIKROELEKTRONIK DAN LAWATAN INDUSTRI, (02 Dec 2010 - 06 Dec 2010)
INTERNAL COURSE- ORGANIZED BY PTJ
  1. BENGKEL HALA TUJU FAKULTI KEJURUTERAAN 2022-2025, Port Dickson (03 Dec 2021 - 03 Dec 2021)
  2. BENGKEL HALA TUJU FAKULTI KEJURUTERAAN 2022-2025, Port Dickson (04 Dec 2021 - 04 Dec 2021)
External Course
NATIONAL
  1. Going Digital with the 3rd Generation PCR System, Online (19 Jan 2021 - 19 Jan 2021)