Curriculum Vitae

PROFESSOR IR. DR. NIK NAZRI BIN NIK GHAZALI

Professor
  • Department of Mechanical Engineering
    Faculty of Engineering
  • nik_nazri
  • +603-79674454
  • 016-6688744

AREAS OF EXPERTISE


  • SIMULATION OF STENOSIS USING CFD
    Stenosis heart artery
  • OBSTRUCTIVE SLEEP APNEA (OSA) USING CFD
    Sleep Disorder
  • PARALLEL PROGRAMMING IN CFD
    Poisson Equation, Multigrid Algorithm, Parallel computation, MPI
  • COMPUTATIONAL FLUID DYNAMICS (CFD)
    Large Eddy Simulation

ACADEMIC QUALIFICATION


  • PhD (UM)(2013), (KEJURUTERAAN MEKANIKAL)
    Universiti Malaya (UM)
  • MSc (Cranfield,UK)(1997), (COMPUTATIONAL FLUID DYNAMIC)
    Cranfield Institute of Technical, UK
  • BEng (Hons)(Mech)(Bradford,UK)(1996), (KEJURUTERAAN MEKANIKAL)
    Bradford University, Bradford, UK

ADMINISTRATIVE DUTIES


  • Dean
    02 Dec 2023 - present (Dean Office, Faculty of Engineering)
  • Head of Department
    10 Aug 2022 - 31 Dec 2023 (Department of Mechanical Engineering, Faculty of Engineering)
  • Principal
    01 Jan 2021 - 31 Dec 2021 (Tuanku Bahiyah Residential College, Deputy Vice-Chancellor (Student Affairs))
  • Principal
    01 Mar 2019 - 31 Dec 2020 (Tuanku Bahiyah Residential College, Deputy Vice-Chancellor (Student Affairs))
  • Head of Department
    16 Jan 2019 - 31 Jul 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • Associate Dean
    01 Jul 2017 - 31 Jul 2018 (Faculty)
  • Head of Unit
    13 May 2015 - 12 May 2016 (Dean Office, Faculty of Engineering)

MEMBERSHIPS


  • ASEAN CHARTERED PROFESSIONAL ENGINEER , MEMBER
    Since 2021 (International)
  • IEM CORPORATE MEMBER, CORPORATE MEMBER
    Since 2017 (National)
  • PROFESSIONAL ENGINEER, MEMBER
    2022 to 2022 (National)
  • BOARD OF ENGINEER, PROFESSIONAL ENGINEER
    2017 to 2021 (National)

AWARD AND STEWARDSHIP


  • CERTIFICATE OF EXCELLENT SERVICE
    University of Malaya, 2022 (University)
  • Judge Speakout for Engineering
    Faculty of Engineering, 2021 (University)
  • Interview Panel
    Kementerian Pendidikan Malaysia, 2019 (National)
  • Excellent Lecturer Award
    Facullty of Engineering, 2019 (University)
  • K-Novasi (pengajaran dan Pembelajaran)
    Universiti Kebangsaan Malaysia, 2019 (National)
  • EXCELLENCE SERVICE AWARD
    University of Malaya, 2019 (University)
  • Judge
    Bandar Utama Damansara High School, 2018 (National)
  • CERTIFICATE OF EXCELLENT SERVICE
    University of Malaya, 2015 (University)
  • Certificate for Teaching Excellence
    Department of Engineering Design and Manufacturing, 2012 (University)
  • CERTIFICATE OF EXCELLENT SERVICE
    University of Malaya, 2007 (University)
  • Best Performance in Courses
    Ford (UK) Motor, 1996 (International)

PUBLICATIONS


Article in Journal
WoS
  1. Haowei, Yu; Mahyuddin, Norhayati; Ghazali, Nik Nazri Bin Nik; Wang, Zeyu; Liu, Yiqiao; Pan, Song; Badruddin, Irfan Anjum (2024). A critical review of research methodologies for COVID-19 transmission in indoor built environment, INTERNATIONAL JOURNAL OF ENVIRONMENTAL HEALTH RESEARCH. . doi:10.1080/09603123.2024.2308731
  2. Putra, Putri Humairah Monashofian; Rozali, Shaifulazuar; Patah, Muhamad Fazly Abdul; Ghazali, Nik Nazri Nik; Ahmad, Roslina; Idris, Aida (2024). Effect of metal powder and coil on microwave pyrolysis of mixed plastic, CHEMICAL ENGINEERING JOURNAL. 487. doi:10.1016/j.cej.2024.150530
  3. Sajid, Imran Haider; Aslfattahi, Navid; Salleh, Mohd Faiz Mohd; Ghazali, Nik Nazri Nik; Saidur, R.; Tahir, Muhammad; Bashir, Mohamed Bashir Ali; Sabri, Mohd Faizul Mohd (2024). High thermoelectric performance of multiwalled carbon nanotubes based ionogels, MATERIALS TODAY COMMUNICATIONS. 38. doi:10.1016/j.mtcomm.2024.108334
  4. Shahapurkar, Kiran; Gebremaryam, Gezahgn; Kanaginahal, Gangadhar; Ramesh, S.; Nik-Ghazali, Nik-Nazri; Chenrayan, Venkatesh; Soudagar, Manzoore Elahi M.; Fouad, Yasser; Kalam, M. A. (2024). An Experimental Study on the Hardness, Inter Laminar Shear Strength, and Water Absorption Behavior of Habeshian Banana Fiber Reinforced Composites, JOURNAL OF NATURAL FIBERS. 21(1). doi:10.1080/15440478.2024.2338930
  5. Shahapurkar, Kiran; Kiran, M. C.; Chenrayan, Venkatesh; Kanaginahal, Gangadhar; Gebremaryam, Gezahgn; Nik-Ghazali, Nik-Nazri; Kuan, Tze Mei; Ariffin, Azrul Mohd; Arunachalam, Arulraj; Fouad, Yasser; Soudagar, Manzoore Elahi M. (2024). Flexural behavior of epoxy composites reinforced with banana fibers in different architectures: experimental, analytical, and numerical approaches, BIOMASS CONVERSION AND BIOREFINERY. . doi:10.1007/s13399-024-05872-z
  6. Shahapurkar, Kiran; Ramesh, S.; Nik-Ghazali, Nik-Nazri; Chenrayan, Venkatesh; Kiran, M. C.; Kanaginahal, Gangadhar; Soudagar, Manzoore Elahi M.; Fouad, Yasser; Kalam, M. A. (2024). Influence of Habesha eggshell on the dry sliding wear behavior of epoxy composites (MAR, 10.1007/s13399-024-05482-9, 2024), BIOMASS CONVERSION AND BIOREFINERY. . doi:10.1007/s13399-024-05583-5
  7. Shahapurkar, Kiran; Ramesh, S.; Nik-Ghazali, Nik-Nazri; Chenrayan, Venkatesh; Kiran, M. C.; Kanaginahal, Gangadhar; Soudagar, Manzoore Elahi M.; Fouad, Yasser; Kalam, M. A. (2024). Influence of Habesha eggshell on the dry sliding wear behavior of epoxy composites, BIOMASS CONVERSION AND BIOREFINERY. . doi:10.1007/s13399-024-05482-9
  8. Shahapurkar, Kiran; Ramesh, S.; Nik-Ghazali, Nik-Nazri; Gebremaryam, Gezahgn; Kanaginahal, Gangadhar; Venkatesh, C.; Soudagar, Manzoore Elahi M.; Fouad, Yasser; Kalam, M. A. (2024). Tensile, compressive, and fracture behavior of Habeshian chopped banana/epoxy core sandwich woven banana composite, BIOMASS CONVERSION AND BIOREFINERY. . doi:10.1007/s13399-024-05455-y
  9. Soudagar, Manzoore Elahi M.; Ramesh, S.; Khan, T. M. Yunus; Almakayeel, Naif; Ramesh, R.; Ghazali, Nik Nazri Nik; Cuce, Erdem; Shelare, Sagar (2024). An overview of the existing and future state of the art advancement of hybrid energy systems based on PV-solar and wind, INTERNATIONAL JOURNAL OF LOW-CARBON TECHNOLOGIES. 19, 207-216. doi:10.1093/ijlct/ctad123
  10. Yau, Yat Huang; Rodzi, Mohd Azhari Mohd; Ghazali, Nik Nazri Nik (2024). Numerical simulation on supply air of high sidewall grille with retrofitted energy recovery ventilator system for thermal comfort in the tropics, JOURNAL OF BUILDING ENGINEERING. 89. doi:10.1016/j.jobe.2024.109281
  11. Ahmad, NurFarrahain Nadia; Ghazali, Nik Nazri Nik; Rani, Ahmad Taufiq Abdul; Kee, Chia Ching; Wong, Yew Hoong (2023). Bioinspired adhesive patch with octopus vulgaris micro-sucker and hexagonal tree-frog pad structures, MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING. 166. doi:10.1016/j.mssp.2023.107731
  12. Ahmad, NurFarrahain Nadia; Ghazali, Nik Nazri Nik; Rani, Ahmad Taufiq Abdul; Othman, Mohammad Hafiz; Kee, Chia Ching; Jiwanti, Prastika Krisma; Rodriguez-Gomez, Arturo; Wong, Yew Hoong (2023). Finger-Actuated Micropump of Constant Flow Rate without Backflow, MICROMACHINES. 14(4). doi:10.3390/mi14040881
  13. Athani, Abdulgaphur; Ghazali, N. N. N.; Badruddin, Irfan Anjum; Kamangar, Sarfaraz; Ahmed, N. J. Salman; Honnutagi, Abdulrazak (2023). Visualization of multiphase pulsatile blood over single phase blood flow in a patient specific stenosed left coronary artery using image processing technique, BIO-MEDICAL MATERIALS AND ENGINEERING. 34(1), 13-35. doi:10.3233/BME-211333
  14. Faizal, W. M.; Khor, C. Y.; Yaakob, Muhammad Nooramin Che; Ghazali, N. N. N.; Zainon, M. Z.; Ibrahim, Norliza Binti; Razi, Roziana Mohd (2023). Turbulent Kinetic Energy of Flow during Inhale and Exhale to Characterize the Severity of Obstructive Sleep Apnea Patient, CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES. 136(1), 43-61. doi:10.32604/cmes.2023.022716
  15. Latif, Mohd Faruq Abdul; Ghazali, Nik Nazri Nik; Abdullah, M. F.; Ibrahim, Norliza Binti; Razi, Roziana M.; Badruddin, Irfan Anjum; Kamangar, Sarfaraz; Hussien, Mohamed; Ahammad, N. Ameer; Khan, Azeem (2023). Modelling the Upper Airways of Mandibular Advancement Surgery: A Systematic Review, MATHEMATICS. 11(1). doi:10.3390/math11010219
  16. Athani, Abdulgaphur; Ghazali, Nik Nazri Nik; Badruddin, Irfan Anjum; Kamangar, Sarfaraz; Anqi, Ali E.; Algahtani, Ali (2022). Investigation of two-way fluid-structure interaction of blood flow in a patient-specific left coronary artery, BIO-MEDICAL MATERIALS AND ENGINEERING. 33(1), 13-30. doi:10.3233/BME-201171
  17. Muzhaimey, Syarif Syahrul Syazwan; Ghazali, Nik Nazri Nik; Zainon, Mohd Zamri; Badruddin, Irfan Anjum; Hussien, Mohamed; Kamangar, Sarfaraz; Ahammad, N. Ameer (2022). Numerical Investigation of Heat Transfer Enhancement in a Microchannel with Conical-Shaped Reentrant Cavity, MATHEMATICS. 10(22). doi:10.3390/math10224330
  18. Salami, Erfan; Montazer, Elham; Ward, Thomas A.; Ghazali, Nik Nazri Nik; Badruddin, Irfan Anjum (2022). Aerodynamic Performance of a Dragonfly-Inspired Tandem Wing System for a Biomimetic Micro Air Vehicle, FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY. 10. doi:10.3389/fbioe.2022.787220
  19. Yang, Fan; Liu, Qiulin; Li, Guodong; Zhang, Xiaofan; Bin Rozali, Shaifulazuar; Ghazali, Nik Nazri Nik; Sabri, Mohd Faizul Mohd; Zhao, Huaizhou (2022). Effect of additives and optimized Cyclic voltammetry parameters on the morphology of electrodeposited Tellurium thin film, JOURNAL OF ELECTROANALYTICAL CHEMISTRY. 925. doi:10.1016/j.jelechem.2022.116872
  20. Yau, Yat Huang; Toh, Hui Sin; Chew, Bee Teng; Ghazali, Nik Nazri Nik (2022). A review of human thermal comfort model in predicting human-environment interaction in non-uniform environmental conditions, JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY. . doi:10.1007/s10973-022-11585-0
  21. Abdullah, Muhammad Fazrin; Jauhari, Iswadi; Mohd Sabri, Mohd Faizul; Nik Ghazali, Nik Nazri (2021). A Novel Vertical Axis Parallel Turbines System for In-pipe Hydropower Generation: Conceptual Design and Preliminary Experiment, ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS. . doi:10.1080/15567036.2021.1880501
  22. Ahmad, N. F. N., Ghazali, N. N. N., & Wong, Y. H. (2021). Wearable patch delivery system for artificial pancreas health diagnostic-therapeutic application: A review. Biosensors & Bioelectronics, 189, 18. doi: 10.1016/j.bios.2021.113384
  23. Ahmad, N. N., Ghazali, N. N. N., & Wong, Y. H. (2021). Mechanical and fluidic analysis of hollow side-open and outer-grooved design of microneedles. Materials Today Communications, 29. doi: 10.1016/j.mtcomm.2021.102940
  24. Ahmad, NN; Ghazali, NNN; Wong, YH (2021). Concept Design of Transdermal Microneedles for Diagnosis and Drug Delivery: A Review, ADVANCED ENGINEERING MATERIALS. . doi:10.1002/adem.202100503
  25. Athani, Abdulgaphur; Ghazali, Nik Nazri Nik; Badruddin, Irfan Anjum; Usmani, Abdullah Y.; Kamangar, Sarfaraz; Anqi, Ali E.; Ahammad, Nandalur Ameer (2021). Two-Phase Non-Newtonian Pulsatile Blood Flow Simulations in a Rigid and Flexible Patient-Specific Left Coronary Artery (LCA) Exhibiting Multi-Stenosis, APPLIED SCIENCES-BASEL. 11(23). doi:10.3390/app112311361
  26. Esmaeilzadeh, A., Nik-Ghazali, N., Metselaar, H. S. C., Naghavi, M. S., Azuddin, M., & Iranmanesh, S. (2021). Thermal performance evaluation of the heat pipe by using 1-pyrene carboxylic-acid functionalized graphene nanofluid. International Communications in Heat and Mass Transfer, 129, 13. doi: 10.1016/j.icheatmasstransfer.2021.105669
  27. Faizal, W. M., Ghazali, N. N. N., Khor, C. Y., Zainon, M. Z., Badruddin, I. A., Kamangar, S., . . . Razi, R. M. (2021). Computational Analysis of Airflow in Upper Airway under Light and Heavy Breathing Conditions for a Realistic Patient Having Obstructive Sleep Apnea. Cmes-Computer Modeling in Engineering & Sciences, 128(2), 583-604. doi: 10.32604/cmes.2021.015549
  28. Gavhane, R. S., Kate, A. M., Soudagar, M. E. M., Wakchaure, V. D., Balgude, S., Fattah, I. M. R., . . . Shahabuddin, M. (2021). Influence of Silica Nano-Additives on Performance and Emission Characteristics of Soybean Biodiesel Fuelled Diesel Engine. Energies, 14(5), 16. doi: 10.3390/en14051489
  29. Swamy, LR; Banapurmath, NR; Chandrashekar, TK; Soudagar, MEM; Gul, M; Nik-Ghazali, NN; Mujtaba, MA; Shahapurkar, K; Agbulut, U; Alshehri, HM; Sajjan, AM; Goodarzi, M (2021). Effect of injection timing and duration on the performance of diesel engine fueled with port injection of oxygenated fuels, CHEMICAL ENGINEERING COMMUNICATIONS. . doi:10.1080/00986445.2021.2013211
  30. Equbal, A., Shamim, M., Badruddin, I. A., Equbal, I., Sood, A. K., Ghazali, N. N. N., & Khan, Z. A. (2020). Application of the Combined ANN and GA for Multi-Response Optimization of Cutting Parameters for the Turning of Glass Fiber-Reinforced Polymer Composites. Mathematics, 8(6), 20. doi: 10.3390/math8060947
  31. Esmaeilzadeh, A., Silakhori, M., Ghazali, N. N. N., Metselaar, H. S. C., Bin Mamat, A., Sanjani, M. S. N., & Iranmanesh, S. (2020). Thermal Performance and Numerical Simulation of the 1-Pyrene Carboxylic-Acid Functionalized Graphene Nanofluids in a Sintered Wick Heat Pipe. Energies, 13(24), 21. doi: 10.3390/en13246542
  32. Faizal, W. M., Ghazali, N. N. N., Khor, C. Y., Badruddin, I. A., Zainon, M. Z., Yazid, A. A., . . . Razi, R. M. (2020). Computational fluid dynamics modelling of human upper airway: A review. Computer Methods and Programs in Biomedicine, 196, 22. doi: 10.1016/j.cmpb.2020.105627
  33. Mulla, Mohammed Fahimuddin; Badruddin, Irfan Anjum; Nik-Ghazali, N.; Muhamad, Mohammed Ridha; Saleel, Ahamed C.; Ganesan, Poo Balan (2020). Investigation of heat transfer in porous channels, INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW. 30(3), 1497-1517. doi:10.1108/HFF-03-2019-0203
  34. Soudagar, M. E. M., Nik-Ghazali, N. N., Kalam, M. A., Badruddin, I. A., Banapurmath, N. R., Bin Ali, M. A., . . . Akram, N. (2020). An investigation on the influence of aluminium oxide nano-additive and honge oil methyl ester on engine performance, combustion and emission characteristics. Renewable Energy, 146, 2291-2307. doi:10.1016/j.renene.2019.08.025
Others
  1. Erfan Salami, Elham Montazer, Thomas A Ward, Nik Nazri Nik Ghazali , Irfan Anjum Badruddin (2022), Aerodynamic Performance of a Dragonfly-Inspired Tandem Wing System for a Biomimetic Micro Air Vehicle, Frontiers in Bioengineering and Biotechnology, 10.
  2. E. Salami, T.A. Ward, E. Montazer, N.N.N. Ghazali, Nano-indentation Analysis Comparing Dragonfly-inspired Biomimetic Micro Aerial Vehicle (BMAV) Wings, International Journal of Bio-Inspired Computation, 16(2), 2020
  3. M Soudagar, N Nik-Ghazali, N Akram, M Al-Rashid, I Badruddin, H Khan, V Kallannavar, K Shahpurkar, A Afzal, R Farade, S Taqui, S Ukkund, The Potential of Nanoparticle Additives in Biodiesel: A Fundamental Outset, AIP Conference Proceedings, 2247(1), 30003, 2020
  4. M.E.M. Soudagar, N. Nik-Ghazali, M.A Kalam, I.A. Badruddin, N.R. Banapurmath, M.A. Ali, S. Kamangar, H.M. Cho, and N. Akram, An Investigation on the Influence of Aluminium Oxide Nano-Additive and Honge Oil Methyl Ester on Engine Performance, Combustion and Emission Characteristics, Renewable Energy, 146 (2020) 2020
  5. Erfan Salami, Thomas A Ward, Elham Montazer, Nik Nazri Nik Ghazali, A Review of Aerodynamic Studies on Dragonfly Flight, Journal of Mechanical Engineering Science, 0(0) 1 19, 2019
  6. IH Sajid, MFM Sabri, SM Said, MFM Salleh, NN Nik Ghazali, R Saidur, B Subramaniam, SW Hasan, HA Jaffery, Crosslinked thermoelectric hydro-ionogels: A new class of highly conductive thermoelectric materials, Energy Conversion and Management, 198, 111813, doi:10.1016/j.enconman.2019.111813 (2019)
  7. IH Sajid, N Aslfattahi, MFM Sabri, SM Said, R Saidur, MFM Salleh, NN Nik Ghazali, SW Hasan, Synthesis and characterization of novel p-type chemically cross-linked ionogels with high ionic seebeck coefficient for low-grade heat harvesting, Electrochimica Acta(2019), doi:10.1016/j.electacta.2019.134575 (2019)
  8. M. Mulla, Mohammed, I. Badruddin, N. Nik-Ghazali, M. Muhamad, A. Chandu Veetil, P. Ganesan , Poo, Investigation Of Heat Transfer In Porous Channels, International Journal of Numerical Methods for Heat and Fluid Flow, 30(3), 2019.
  9. M.E.M. Soudagar, N.N.N. Ghazali, M.A. Kalam, I.A. Badruddin, N.R. Banapurmath, T.M.Y Khan, M.N Bashir, N. Akram, R. Farade, A. Afzal, The e ects of graphene oxide nanoparticle additive stably dispersed in dairy scum oil biodiesel-diesel fuel blend on CI engine: performance, emission and combustion characteristics, 257 (116015) Fuel, 2019
  10. S Ibrahim, L Qi, S Rozali, NNN Ghazali, TZT Zaharinie, MFM Sabri, Preparation and Characterization of Carbon Nanospheres Using Sugar as a Precursor, Key Engineering Materials, 796, 11-16, 2019
  11. S. Kamangar, MA Khan, IA Badruddin, TMY Khan and N Ghazali, Numerical analysis of heat transfer in human head, Journal of Mechanical Science and Technology 33(7)3597~3605, 2019
  12. W.M.F.W.A. Rahim, N.N.N Ghazali, I. Magami, M.Z. Zainon, A. Ahmad-Yazid, M.A. Ali, C.Y. Khor, N. Ibrahim, R.M Razi, A Review Of Fluid-Structure Interaction Simulation For Patients With Sleep Related Breathing Disorders With Obstructive Sleep, Computer Methods And Programs In Biomedicine, 180, 2019
  13. YY Khaw, CY Chee, SN Gan, R Singh, NNN Ghazali, NS Liu, Poly (lactic acid) composite films reinforced with microcrystalline cellulose and keratin from chicken feather fiber in 1-butyl-3-methylimidazolium chloride, Journal of Applied Polymer Science 136 (24), 2019
  14. Azeem, I. A. Badruddin, N Nik-Ghazali, Mohd Yamani Idna Idris, Ali E Anqi, Salman Ahmed N J, Sarfaraz Kamangar, Abdullah A A A Al-Rashed, Effect of size and location of solid on conjugate heat transfer in porous cavity, Indian Journal of Pure & Applied Physics, Vol. 56, October 2018.
  15. Diaa Abidou, Ahmed AD Sarhan, Nukman Yusoff, Nik Nazri Nik Ghazali, MA Omar Awang, Mohsen A Hassan, Numerical simulation of metal removal in laser drilling using meshless local Petrov Galerkin Collocation Method, Applied Mathematical Modelling, 56(239-253), 2018
  16. M. E. M. Soudagar, Nik Nazri Nik Ghazali, Md. Abul Kalam, Irfan Anjum Magami, N R Banapurmath, Naveed Akram, The Effect of Nano-Additives in Diesel-Biodiesel Fuel Blends: A Comprehensive Review on Stability, Engine Performance and Emission Characteristics, Energy Conversion and Management, 178 (146-177), 2018.
  17. Badruddin, I.A., Azeem, Mohd Yamani Idna Idris, Nik-Ghazali. N., Salman Ahmed N.J, Abdullah A.A.A. Al-Rashed, Simplified Finite Element Algorithm to Solve Conjugate Heat and Mass Transfer in Porous Medium, International Journal of Numerical Methods for Heat and Fluid Flow, Vol. 27, (2017).
  18. Diaa Abidou, Nukman Yusoff, Nik Nazri, M.A. Omar Awang, Mohsen A. Hassan, Ahmed A.D. Sarhan, Numerical simulation of metal removal in laser drilling using symmetric smoothed particle hydrodynamics, Precision Engineering, http://dx.doi.org/10.1016/j.precisioneng.2017.01.012
  19. Diaa Abidoua, Nukman Yusoff, Nik Nazri, M.A. Omar Awang, Mohsen A. Hassan, Ahmed A.D. Sarhan, Numerical simulation of metal removal in laser drilling using radial point interpolation method, Engineering Analysis with Boundary Elements, Volume 77, Pages 89 96, 2017. http://dx.doi.org/10.1016/j.enganabound.2017.01.010
  20. Kamangar S, Badruddin IA, Ameer Ahamad N, Soudagar MEM, Govindaraju K, Nik-Ghazali N, Salman Ahmed NJ, Yunus Khan TM, Patient specific 3-d modeling of blood flow in a multi-stenosed left coronary artery, BioMedical Materials and Engineering, 28(3):257-266, 2017
  21. Kamangar, S, Badruddin, IA, Ahamad, NA, Govindaraju, K, Nik-Ghazali, N, Ahmed, NJS, Badarudin, A, Khan, TMY. The Influence of Geometrical Shapes of Stenosis on the Blood Flow in Stenosed Artery. Sains Malaysiana, Vol: 46(10), p. 1923-1933, 2017
  22. Mhd Abd Cader Mhd Haniffa, Yern Chee Ching, Cheng Hock Chuah,Kuan Ching Yong, Nik Nazri, Luqman Chuah Abdullahe, Liou Nai-Shang, Effect of TEMPO-Oxidization and Rapid Cooling on Thermo-Structural Properties of Nanocellulose, Carbohydrate Polymers 173 (2017) 91-99. (ISI-Indexed)
  23. S.Kamangar, I.A. Badruddin, A. Badarudin, N. Nik-Ghazali, K. Govindaraju, N.J. Salman Ahmed, T.M. Yunus Khan, Influence of Stenosis on Hemodynamic Parameters in the Realistic Left Coronary Artery under Hyperemic Conditions, Computer Methods on Biomechanics and Biomedical Engineering, Vol 9(1-8), 2016. DOI:10.1080/10255842.2016.1233402
  24. SM Said, MBA Bashir, MFM Sabri, Y Miyazaki, DAA Shnawah AS Hakeem, M Shimada, AI Bakare, NNN Ghazali, MH Elsheikh, Enhancement of Thermoelectric Behavior of La0.5Co4Sb12 x Te x Skutterudite Materials. Metallurgical and Materials Transactions A, 1-9. doi: 10.1007/s11661-017-4058-1 (2017)
  25. Sarfaraz Kamangar, Irfan Anjum Badruddin, Kalimuthu Govindaraju, N Nik-Ghazali, A Badarudin, Girish N Viswanathan, NJ Salman Ahmed, TM Yunus Khan, Patient-Specific 3D Hemodynamics Modelling of Left Coronary Artery under Hyperemic Conditions, Medical & Biological Engineering & Computing, 55(1451-1461), 2017
  26. Azeem, Irfan Anjum Badruddin, Mohd Yamani Idna Idris, N Nik-Ghazali, Salman Ahmed N.J, Abdullah A.A.A. Al-Rashed, Conjugate Heat and Mass Transfer in Square Porous Cavity, Indian Journal of Pure & Applied Physics, Vol 54 (777-786), 2016
  27. B. Shahizare,N.N.N. Ghazali,W.T. Chong, S.S. Tabatabaeikia, N.Izadyar, Investigation of the Optimal Omni-Direction-Guide-Vane Design for Vertical Axis Wind Turbines Based on Unsteady Flow CFD Simulation, Energies 2016, 9(3), 146; doi:10.3390/en9030146
  28. B.Shahizare, N.Nik-Ghazali, W.T.Chong, S.Tabatabaeikia, N. Izadyar, A. Esmaeilzadeh, Novel investigation of the different Omni-direction-guide-vane angles effects on the urban vertical axis wind turbine output power via three-dimensional numerical simulation, Energy Conversion and Management, 117(206-217),2016, doi:10.1016/j.enconman.2016.03.034
  29. N. R. Kuppusamy, N.N.N. Ghazali, R. Saidur, M.A. Omar Awang, H. A. Mohammed, "Heat Transfer Enhancement in a Microchannel Heat Sink with Trapezoidal Cavities on the Side Walls", Applied Mechanics and Materials, Vol. 819, pp. 127-131, 2016.
  30. S. Kamangar, I. A. Badruddin, K. Govindaraju, N. Nik-Ghazali, A. Badarudin, G. N. Viswanathan, N. J. Salman Ahmed, T. M. Yunus Khan, Patient-Specific 3D Hemodynamics Modelling of Left Coronary Artery under Hyperemic Conditions, Medical & Biological Engineering & Computing, 54(383), 1-11, 2016. doi:10.1007/s11517-016-1604-8
  31. S. Tabatabaeikia, N. Nik-Ghazali, W.T. Chong, B. Shahizare, A. Fazlizan, A. Esmaeilzadeh, N. Izadyar, A Comparative Computational Fluid Dynamics Study on an Innovative Exhaust Air Energy Recovery Wind Turbine Generator, Energies, 9(5), 346, 2016. doi:10.3390/en9050346
  32. S. Tabatabaeikia, N. Nik-Ghazali, W.T. Chong, B. Shahizare, A. Fazlizan, Computational and Experimental Optimization of the Exhaust Air Energy Recovery Wind Turbine Generator, Energy Conversion and Management, Volume 126: 862 874, 2016, doi: dx.doi.org/10.1016/j.enconman.2016.08.039
  33. A.S. Silitongaa,H.H. Masjuki,T.M.I. Mahlia,Hwai Chyuan Ong,F. Kusumoa,H.B. Aditiyaa,N.N.N. Ghazali, Schleichera oleosa L oil as feedstock for biodiesel production, 156(63-70),2015. DOI:10.1016/j.fuel.2015.04.046
  34. Irfan Anjum Badruddin,Ahmed N. J. Salman,Abdullah A. A. A. Al-Rashed,N. Nik-Ghazali,Mohammed Jameel,Sarfaraz Kamangar,H. M. T. Khaleed,T. M. Yunus Khan1, Conjugate Heat Transfer in an Annulus with Porous Medium Fixed Between Solids,Transport in Porous Media, 2015, DOI: 10.1007/s11242-015-0537-2
  35. Navin Raja Kuppusamy, N.N.N. Ghazali, R. Saidur, Optimum design of triangular shaped micro mixer in micro channel heat sink, International Journal of Heat and Mass Transfer, 2015. doi:10.1016/j.ijheatmasstransfer.2015.07.088
  36. Megat Muhammad Ikhsan Megat Hasnan, Mohd Faizul Mohd Sabri, Suhana Mohd Said, Nik Nazri Nik Ghazali.2014. Modeling of a High Force Density Fishbone Shaped Electrostatic Comb Drive Microactuator, The Scientific World Journal, DOI: 10.1155/2014/912683
  37. N. Nik-Ghazali, Irfan Anjum Badruddin, A. Badarudin, and S. Tabatabaeikia, Dufour and Soret Effects on Square Porous Annulus, Advances in Mechanical Engineering, doi: 10.1155/2014/209753.
  38. N.R. Kuppusamy, R. Saidur, N.N.N. Ghazali , H.A. Mohammed, Numerical study of thermal enhancement in micro channel heat sink with secondary flow, International Journal of Heat and Mass Transfer 78 (2014) 216 223. doi: 10.1016/j.ijheatmasstransfer.2014.06.072
  39. S. Tabatabaeikia, H.A. Mohammed, N. Nik- Ghazali, B. Shahizarea, Heat Transfer Enhancement by Using Different Types of Inserts, Advances in Mechanical Engineering, vol. 2014, Article ID 250354, 13 pages, 2014. doi:10.1155/2014/250354
  40. A. Badarudin, C. S. Oon, S. N. Kazi, N. Nik-Ghazali, Y. J. Lee, and W. T. Chong, Numerical Simulation and Experiment of a Lifting Body with Leading-Edge Rotating Cylinder, World Academy of Science, Engineering and Technology, Pg 377-381, Vol. 75, 2013
  41. A.Badry, Y.Lee, W.Chong, N.Nik-Ghazali, C.Oon, K.S.Newaz. 2013. Numerical Analysis of the Effect of Vortex Control Mechanism on Longitudinal Aerodynamics of Lifting Body. Aerospace Science and Technology. Volume 30(1): 232 238
  42. M. Z. Zainon, S. N. Kazi, W. T. Chong, N. N. N. Ghazali, R. Ramli, Development of Two-phase Flow Sensor for Measurement of Parameters in Gas-Liquid System, Modern Mechanical Engineering, 2013
  43. W.T. Chong, K.C. Pan, S.C. Poh, A. Fazlizan, C.S. Oon, A. Badarudin, N. Nik-Ghazali. 2013. Performance investigation of a power augmented vertical axis wind turbine for urban high-rise application, Renewable Energy, 51, pg. 388-397
  44. A. Badarudin, N.N.N. Ghazali, M. F. A. Tajuddin, M.Z. Zainon. 2008. Maneuverability Improvement for a Half-Cone Body in the Low-Speed Region. Engineering e-Transaction (ISSN 1823-6379) Vol. 3, No.1, June 2008, pp 14-22.
  45. N.N.N. Ghazali , A. Badarudin and M.Z. Zainon. 2008. Glider Flow Prediction in the Low-Speed Region with Multiple Turbulence Modeling Levels. Engineering e-Transaction (ISSN 1823-6379), Vol. 3, No.1, June 2008, pp 23-29.
  46. Y.C. Lim, N.N.N. Ghazali, A. Partovi. 2008. Fuel Saving by using Riblets on Automobile. Engineering e-Transaction (ISSN 1823-6379), Vol. 3, No.1, June 2008, pp 10-13.
  47. T.M.I Mahlia, H.H Masjuki, I.A Choudhury, N.N.N Ghazali, Economical and environmental impact of room air conditioners energy labels in Malaysia , Energy Conversion and Management, 43(2509-2520), 2002
Books
  1. Abdul Rahim Abdul Manaf & Nik Nazri Nik Ghazali, 2000, Mekanik Gunaan dan Analisis Dinamik, UM Press
Chapter in Books
  1. Ibrahim S., Jakaria@Zakaria N.Z., Rozali S., Ghazali N.N.N., Karim M.S.A., Sabri M.F.M. (2020) Biosynthesis of Copper Oxide Nanoparticles Using Camellia Sinensis Plant Powder. In: Awang M., Emamian S., Yusof F. (eds) Advances in Material Sciences and Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore (2020)
Article in Proceeding
  1. Manzoore Elahi M Soudagar, Nik-Nazri Nik-Ghazali, Irfan Anjum Badruddin, M.A Kalam, MD Ibrahim Kittur, Naveed Akram, Mohammed Asad Ullah, T.M. Yunus Khan, Imran Mokashi, Production of Honge Oil Methyl Ester (HOME) and itsPerformance Test on Four Stroke Single Cylinder VCR Engine, AIP Conference Proceedings 2142, 200006 (2019)
  2. A. Badarudin, Y. J. Lee, W. T. Chong, N. Nik-Ghazali and C. S. Oon. Experiments and Simulations on a Lifting Body with Pitch Control Mechanism. ICAMAME 2013: International Conference on Aerospace, Mechanical, Automotive and Materials Engineering
  3. Masjuki, H.H., Kalam, M.A. , Mahlia, T.M.I., Ghazali, N.N.N., Ismail, M.T., Hazrat, M.A. and Pang, S.C., 2011. Time-based/Transient Simulation of Engine Coolant Peak Temperature after Key-Off: Porous Media Behaviour for the Air Flow Distribution, Proceedings of Computationally Optimised Fuel-Efficient Concept Car (COFEC), Vol III, pp 161-176, Centre for Automotive Research, Universiti Kebangsaan Malaysia, Malaysia. ISBN 978-967-5878-45-9.
  4. Masjuki, H.H., Kalam, M.A. , Mahlia, T.M.I., Ghazali, N.N.N., Ismail, M.T., Hazrat, M.A. and Pang, S.C., 2011. Coolant Peak Temperature after Key-Off: Porous Media Behaviour for the Air Flow Distribution, Proceedings of Computationally Optimised Fuel-Efficient Concept Car(COFEC), Proceedings of Computationally Optimised Fuel-Efficient Concept Car (COFEC), Vol III, pp 161-176, Centre for Automotive Research, Universiti Kebangsaan Malaysia, Malaysia. ISBN 978-967-5878-45-9
  5. Md. Hazrat Ali, H. H. Masjuki, M. A. Kalam, T.M.I Mahlia, N.N.N. Ghazali; Numerical Model of Heat Transfer Study of Radiators to Enhance Cooling Performance of Internal Combustion Engine for Passenger Vehicles - A Review; Proceedings of EnCon2010 3rd Engineering Conference on Advancement in Mechanical and Manufacturing for Sustainable Environment;Kuching, Sarawak, Malaysia;April 14-16, 2010; PP 77 (ISBN: 978-967-5418-10-5).
  6. N.N.N. Ghazali, Y.H. Yau, A.Badarudin, Y.C. Lim. Computational fluid dynamics (CFD) simulation of drag reduction by riblets on automobile. The Proceeding of ISCM II & EPMESC XII, 29 November 3 December 2009, Paper No. 550, Hong Kong-Macau
  7. Y.H. Yau, N.N.N. Ghazali, A. Badarudin and F.C. Goh. CFD Simulation on thermal comfort in a library building in the tropics. Proceeding of ISCM II & EPMESC XII, 29 November 3 December 2009, Paper No. 549, Hong Kong - Macau

RESEARCH INTEREST


  • Engineering Mechanics
  • Computational Fluid Dynamics

RESEARCH PROJECT


National
  1. 2010 - 2012, Geran Penyelidikan Universiti Malaya (UMRG)
    Simulation of Blood Flow in Diseased Arteries by using Large Eddy Simulation (LES) ( Principal Investigator(PI))
  2. 2008 - 2009, Short Term Research Fund (Vote F)(PJP)
    Simulation of Drag by using Riblet ( Principal Investigator(PI))

CONSULTANCY PROJECT


  • Tm Data Center Cfd Simulation, Telekom Malaysia
    01 Apr 2018 - 01 Apr 2018 (National)
  • Upgrading Kepong Pump House, Ambangan Engineering Sdn Bhd
    01 Apr 2017 - 01 Apr 2018 (National)
  • Neutronics and Thermal-Hydraulics Coupling Analyses for Core and Cooling Systems of Triga Mark Ii Puspati Reactor, Malaysian Nuclear Agency
    01 Nov 2014 - 01 Nov 2015 (National)
  • Green M&E Building Standard in The Tropics, Consultant, 2011-2011, Cream (Cidb), CREAM (CIDB)
    01 Jan 2011 - 01 Jan 2012 (National)
  • Boiler Optimization With Cfd-Flue Gas Trace Simulation, Mackenzie Industries SDN BHD
    01 Nov 2008 - 01 Nov 2009 (National)
  • Energy Saving, Jabatan Bekalan Air Pahang
    01 Nov 2008 - 01 Nov 2009 (National)
  • Tati Training Scheme, Terengganu Advanced Technical Institute
    01 Nov 2007 - 01 Nov 2007 (National)

PAPER PRESENTED


CONFERENCE
  1. Mobility Program at Faculty of Engineering University of Malaya , AOTULE Conference, Asia-Oceania Top University League on Engineering (AOTULE) (International) (22 Nov 2017 - 25 Nov 2017)
PLENARY SPEAKER
  1. Computational Fluid Dynamics Simulation and Engineering, Public Lecture at Faculty of Engineering and Computer Science, Universitas Pancasakti Indonesia (International) (11 Jul 2022 - 11 Jul 2022)
INVITED SPEAKER
  1. In-Pipe Turbine System Technology in Generating Clean Energy to the Environment, The Role of Scientists and Engineers in the Industry 4.0, Universitas Indonesia (International) (23 Jan 2019 - 23 Jan 2019)
POSTER PRESENTER
  1. Drag Reduction Simulation by using Riblet, University-Industry Day, University of Malaya (National) ( )
PRESENTER
  1. Production of Honge Oil Methyl Ester (HOME) and itsPerformance Test on Four Stroke Single Cylinder VCR Engine, AIP Conference Proceedings (29 Aug 2019)
  2. Computational fluid dynamics (CFD) simulation of drag reduction by riblets on automobile, The Proceeding of ISCM II & EPMESC XII, The Proceeding of ISCM II & EPMESC XII, (International) (29 Nov 2010 - 03 Dec 2010)
KEYNOTE SPEAKER
  1. Sustainability Concern: From Industry 4.0 to Industry 5.0, The 3rd International Conference on Engineering and Management in Industrial System (ICOEMIS) 2024, University of Brawijaya (International) (03 Nov 2024 - 03 Nov 2024)
  2. Sustainability Concern: From Industry 4.0 to Industry 5.0, The 3rd International Conference on Engineering and Management in Industrial System (ICOEMIS) 2024, Brawijaya University (International) (03 Oct 2024 - 03 Oct 2024)
  3. Green Manufacture for Providing Sustainable Energy Development , International Conference on Engineering and Computer Science, Universitas Pancasakti Indonesia (International) (20 Jul 2022 - 20 Jul 2022)
  4. Engineering and Pandemic, International Conference of Reflection on Multidisciplinary Dynamics in Post-Pandemic and Disruptive Era, Universitas PGRI Semarang, Indonesia (International) (15 Jul 2022 - 15 Jul 2022)
  5. Moving Towards Zero Hunger , International Conference on Contemporary Issues in Islamic Studies, English Language and Education, Law, and Engineering, Universitas Nahdlatul Ulama Sunan Giri (UNUGIRI) Bojonegoro, East Java Province, Indonesia (International) (14 Jul 2022 - 14 Jul 2022)
  6. Gaining Insight into Interdisciplinary Educational Collaboration Asia, Africa Europe, International Conference of Joint Visiting Professor to Ivet University, Universitas IVET, Indonesia (International) (12 Jul 2022 - 12 Jul 2022)

ACADEMIC/PROF. SERVICES


Evaluation
  1. (2024) Phd Examiner: Asmail Abdulkadr Mohamed Abdalkarem (UKM), National, (External Examiner)
  2. (2023) Jk Tapisan Jabatan, University, (Internal Assessor)
  3. (2022) Candidature Defence Seminar - Aimamariaty Binti Ahmad (17217775/1 ), University, (Internal Assessor)
  4. (2022) Jk Pemindahan Kredit Fakulti Kejuruteraan, University, (Internal Assessor)
  5. (2022) Jk Temuduga Slab Slai Fakulti, University, (Internal Assessor)
  6. (2022) AJK Tapisan Fakulti Kejuruteraan, University, (Internal Assessor)
  7. (2021) Phd Thesis External Examiner, International, (External Examiner)
  8. (2021) Semakan Kurikulum, University, (Reviewer)
  9. (2021) Panel for Frgs Grant Evaluator, University, (Internal Evaluator)
  10. (2021) AJK Pemindahan dan Pengecualian Kredit Fakulti Kejuruteraan, University, (Internal Evaluator)
  11. (2021) Panel for FRGS evaluator 2021 , (Reviewer)
  12. (2021) External Examiner for PhD Thesis - Visvesvaraya Technological University , (External Examiner)
  13. (2019) Energy Performance Comparison between the refrigerant , (Internal Examiner)
  14. (2019) UTP-FRG Grant 2019, (Reviewer)
  15. (2018) Solar Project Township STEM Challenge , (Judge)
  16. (2018) Panel Penilai FRGS , (Evaluator)
  17. (2017) Begin Challenge , (Judge)
  18. (2017) JK Teknikal bagi Energy Management (SIRIM) , (Advisory Committee)
Contribution to external organisation
  1. (2019) Thermal Performance and Numerical Simulation of the 1-Pyrene Carboxylic-Acid Functionalized Graphene Nanofluids in a Sintered Wick Heat Pipe, The University of Adelaide and Arak University, International
  2. (2018) Expert Advise, Universitas Nasional Indonesia, International
  3. (2018) Bengkel Teknik Pengajaran , Fakulti of Engineering, Universiti Malaya, University
  4. (2018) EAC Panel, Board of Engineer, National
  5. (2018) Karnival Pendidikan TInggi Negara, Universiti Malaya, University
  6. (2017) Upgrading Kepong Pumphouse, Ambangan Engineering Sdn Bhd, National
  7. (2017) Karnival Pendidikan Kerjaya, Universiti Malaya, University
  8. (2014) Thermalhydrolic system upgrading of Reactor TRIGA PUSPATI(RTP), Malaysian Nuclear Agency, National
  9. (2009) Technofund Project, UKM, National
Mentoring
  1. (2023) Penasihat Tabung Fakulti Kejuruteraan, University, (Mentor)
  2. (2022) Penasihat Persatuan Mahasiswa UM Anak Terengganu (Permata), University, (Mentor)
  3. (2021) Mental Health Liaison Officer, University, (Mentor)

SUPERVISION


Postgraduate Student
PhD/ Doctoral
  1. (2024) THE EFFECTS OF DIFFUSER DISCHARGE ANGLE FOR A HEAT RECOVERY VENTILATOR FOR THERMAL COMFORT AND ENERGY SAVINGS IN A LARGE BUILDING, MOHD AZHARI MOHD RODZI
  2. (2024) INVESTIGATING THE PERMEATE FLUX, CONCENTRATION AND REJECTION RATE WITH THE ORIGIN OF HEAVY METALS IN ARTIFICIAL WASTE WATER USING RO AND MD PROCESSES., AZAM ALI MOHAMMED
  3. (2024) An Intelligent Optimal Control of Thermal Management and Temperature Distribution in Proton-Exchange-Membrane Fuel Cells, LUO YANG
  4. (2024) An investigation and prediction of window opening behavior based on correlated factors of hospital buildings in Beijing, HAOWEI YU
  5. (2024) OPTIMIZATION AND EXPERIMENTAL VALIDATION OF PUMPS, COMPRESSORS AND FANS IN OFF-SHORE INSTALLATION., EBIKABOWEI EMMANUEL ENEMUGHA
  6. (2024) Computational Fluid Dynamics Modelling and Simulation of Cavitation Occurence within Water Supply Pipelines, KHO TUCK SING
  7. (2024) NUMERICAL INVESTIGATION OF THERMAL COMFORT AND VENTILATION PERFORMANCES OF STRATUM VENTILATION(SV) FOR LARGE BUILDINGS IN THE TROPICS, TOH HUI SIN
  8. (2024) Quantifying Turbulence Kinetic Energy in the Upper Airway of Obstructive Sleep Apnea Patients Post-Mandibular Advancement Surgery, MOHD FARUQ BIN ABDUL LATIF
  9. (2023) Development of a Wearable Patch for Glucose Monitoring and Insulin Delivery, NURFARRAHAIN NADIA BINTI AHMAD
  10. (2023) Microstructural Characteristics and Mechanical Performance of Bi-Sb-Ni Added Sn-3.0Ag-0.5Cu Multicomponent Lead-Free Solder Alloy, ZHOU DING
  11. (2022) NUMERICAL ANALYSIS OF MULTISTENOSED MULTIPHASE PATIENT’S SPECIFIC LEFT CORONARY ARTERY SUBJECTED TO FLUID STRUCTURE INTERACTION, ABDULGAPHUR ABDULKHADAR ATHANI
  12. (2022) Finite Element Analysis of Heat Transfer in Porous Channel, MOHAMMED FAHIMUDDIN MULLA
  13. (2021) THE EFFECT OF NANOADDITIVES DISPERSED IN DIESEL-BIODIESEL FUEL BLEND ON ENGINE PERFORMANCE, COMBUSTION AND EMISSION CHARACTERISTICS, MANZOORE ELAHI M SOUDAGAR
  14. (2021) DESIGN, FABRICATION AND ANALYSIS OF NOVEL DRAGONFLY-BIOINSPIRED, FLAPPING WING SYSTEM FOR A MICRO AIR VEHICLE, ERFAN SALAMI
  15. (2021) COMPUTATIONAL FLUID DYNAMICS (CFD) ANALYSIS OF HUMAN UPPER AIRWAY IN SLEEP APNEA PATIENTS UNDER VARIOUS BREATHING CONDITIONS, WAN MOHD FAIZAL BIN WAN ABD RAHIM
  16. (2021) STUDY OF THERMAL PERFORMANCE AND PROPERTIES OF 1-PYRENE CARBOXYLIC-ACID FUNCTIONALIZED GRAPHENE NANOFLUIDS IN A HEAT PIPE, ALIREZA ESMAEILZADEH
  17. (2019) Synthesis and Characterization of ionogels as thermoelectric materialsications, IMRAN HAIDER SAJID
  18. (2016) NUMERICAL MODELING AND SIMULATION OF MATERIAL REMOVAL IN LASER DRILLING OF THIN METAL SHEETS USING MESHFREE COLLOCATION METHODS, DIAA ABDELMONEM MAHMOUD ABIDOU
  19. (2015) COMPUTATIONAL HEMODYNAMIC ANALYSIS OF STENOSED CORONARY ARTERY, SARFARAZ KAMANGAR
  20. (2015) THERMAL ENHANCEMENT IN A MICROCHANNEL HEAT SINK USING PASSIVE METHODS, NAVIN RAJA A/L KUPPUSAMY
  21. (2015) PERFORMANCE ANALYSIS OF EXHAUST AIR ENERGY RECOVERY WIND TURBINE, SEYEDSAEED TABATABAEIKIA
  22. (2015) PERFORMANCE ANALYSIS OF VERTICAL AXIS WIND TURBINE INTEGRATED WITH OMNI-DIRECTION GUIDE-VANE, BEHZAD SHAHIZARE
  23. (2013) Optimization of Cooling System, Bernard Sagaiyaraj
Master
  1. (2024) WP3: TOWARDS SUSTAINABLE RIVER MANAGEMENT : ENGINEERED CATALYTIC DEPOLYMERISATION METHODS, AHMAD LUQMAN BIN MOHAMAD ADAN
  2. (2024) In-pipe Hydropower Generation : Development and Performance testing of Prototype, MUHAMMAD IQBAL BIN ISMAIL
  3. (2023) Development of an In-Pipe Hydropower Prototype Towards Technology Readiness Level 6, HAKIMAH BINTI AHMAD MAHAUDDIN
  4. (2023) Controllable Growth of Tellurium Based Films by Electrochemical Deposition Technique, YANG FAN
  5. (2020) Optimization of Funnel System in Wind Energy, Siti Sarah Ramani@Abdullah
  6. (2020) Optimization of Diffuser Augmented Design for Horizontal Axis Wind Turbine Using CFD, Shahnur Munirah Mohamad
  7. (2020) Design of Rotor Cooling System, Muhammad Amirul Asri Bin Ahmad
  8. (2017) Fluid Dynamics Study Effect of the Maximum Valve Lift to the Flow Velocity at the Intake Valve of Gasoline Engine, Muhamad Razi Bin Samsudin
  9. (2017) Computational Study of Air Ventilation in High Tension Electrical Cable Tunnel, Sarveswaran Subramaniam
  10. (2015) Computational Fluid Dynamics Simulation of Exhaust Ventilation and Jet Fan Systems during a Fire Event in Velodrome, Sayed Mojtaba Tabibian
  11. (2015) Analysis of MCHS with Improved Secondary Flow, Edward Chung Ning Mun
Under Graduate Students
  1. (2012) Computer Simulation
  2. (2011) Computer Simulation
  3. (2007) Computer Simulation

TEACHING


Master
  1. (2023) KQK7005 - Applied Mechanics
  2. (2020) KQE7002 - Analysis of Applied Engineering
  3. (2020) KQE7007 - Computational Fluid Dynamics
  4. (2019) KQE7002 - Analysis of Applied Engineering
  5. (2019) KQE7005 - Applied Mechanics
  6. (2018) KQE7007 - Computational Fluid Dynamics
  7. (2017) KQE7002 - Analysis of Applied Engineering
  8. (2017) KQE7007 - Computational Fluid Dynamics
  9. (2016) KXGM6105 - Applied Mechanics
  10. (2015) KXGM6105 - Applied Mechanics
  11. (2014) KXGM6104 - Computational Mathematics
  12. (2013) KXGM6105 - Applied Mechanics
  13. (2012) KXGM6104 - Computational Mathematics
Bachelor
  1. (2023) KIG1015 - Dynamics
  2. (2023) KIG4003 - Numerical Methods in Engineering
  3. (2023) KIG1001 - Statics
  4. (2023) KIG1009 - Statics
  5. (2022) KIG2002 - Dynamics
  6. (2022) KIG4003 - Numerical Methods in Engineering
  7. (2020) KIG2002 - Dynamics
  8. (2020) KMEM3116 - Instrumentation and Measurement Technique
  9. (2019) KIG1001 - Statics
  10. (2019) KIG2002 - Dynamics
  11. (2018) KCEC3107 - Finite Element Analysis
  12. (2018) KIB1003 - Statics
  13. (2018) KIG1001 - Statics
  14. (2015) KMEE1168 - Engineering Mechanics
  15. (2013) KMEE1168 - Engineering Mechanics
  16. (2012) KMEB1102 - Applied Mechanics
  17. (2012) KMEE1168 - Engineering Mechanics
  18. (2011) KCEC3213 - Computational Fluid Dynamics
  19. (2011) KMEE1168 - Engineering Mechanics
  20. (2009) KMEE1168 - Engineering Mechanics
  21. (2009) KMEE1168 - Engineering Mechanics
  22. (2008) KMEM2116 - Computer Programming
  23. (2007) KMEM2115 - Calculation and Numerical Method

PATENT/IPR


  • AN IN-PIPE HYDROPOWER GENERATOR
    Patent (International)
  • Self-Cooling Thermo-Electrochemical Cell
    PATENT

SOCIAL RESPONSIBILITY ACTIVITIES


  • Penasihat Persatuan Mahasiswa Terengganu Universiti Malaya (Permata UM) Bagi Sesi 2021/2022, (01 Jan 2022 - 31 Dec 2022) (University)

COURSE ATTENDED


Internal / External Course
INTERNAL COURSE- ORGANIZED BY PTJ
  1. BENGKEL PEMANTAPAN JABATAN KEJURUTERAAN MEKANIK (JKM), Fakulti Kejuruteraan (10 Mar 2018 - 10 Mar 2018)
  2. BENGKEL PENGURUSAN PENGAMBIALN PELAJAR MELALUI SALURAN INTERNATIONAL DEGREE PROGRAMME (IDP), Dewan Bankuasi, Fakulti Alam Bina (28 Feb 2018 - 28 Feb 2018)
  3. BENGKEL PEMANTAPAN URUSAN PENTADBIRAN 2018, FAKULTI KEJURUTERAAN, UNIVERSITI MALAYA, Port Dickson, Negeri Sembilan (12 May 2018 - 13 May 2018)
  4. BENGKEL PELAN STRATEGIK JABATAN KEJURUTERAAN MEKANIK, FAKULTI KEJURUTERAAN 2019, Pullman Kuala Lumpur, Bangsar (16 Oct 2019 - 16 Oct 2019)
  5. BENGKEL KAJIAN SEMULA PENGURUSAN KUALITI BAHAGIAN HAL EHWAL PELAJAR (BHEP) TAHUN 2020, Bilik Mayangsari 1 & 2, Kolej Kediaman Dayasari, Universiti Malaya (26 Feb 2020 - 26 Feb 2020)
  6. BENGKEL PENSIJILAN INTERVENSI KRISIS DAN TRAUMA BAGI MENTAL HEALTH LIAISON OFFICER, Atas Talian (18 Aug 2021 - 19 Aug 2021)
  7. BENGKEL PENSIJILAN PENGAMAL MINDFULNESS LOVE THERAPY MLT-TRAPI KESEDARAN CINTA, Ditempat Masing-Masing (05 Oct 2021 - 06 Oct 2021)