PERSONAL DETAIL


DR. NAZATUL LIANA BINTI SUKIMAN

Department of Mechanical Engineering
Faculty of Engineering
 
  +603-79677022 ext. 2656
  nazatul@um.edu.my
 Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, W.Persekutuan Kuala Lumpur, Malaysia
 
ResearcherID Link
  http://www.researcherid.com/rid/B-9212-2010


BIBLIOMETRIC DATA


 Total Articles in Publication List  8
 Articles With Citation Data  8
 Sum of the Times Cited   217
 Average Citations per Article   27.12
 h-index   7
 Co-authors   Collaboration Network
 This information is generated from http://researcherid.com

ACADEMIC QUALIFICATION
(Qualification), (Institution).



PROFESSIONAL
(Organisation), (Role), (Year), (Level).


  • Board of Engineers Malaysia, Graduate Engineer, 2015, (National)
  • Advances in Materials and Processing Technologies Conference (AMPT) 2016 , Treasurer, 2016 to 2017, (International)
  • International Conference on Mechanical Engineering and Electrical Systems (ICMES) 2016, Scientific Committee, 2016 to 2016, (International)
  • The Electrochemical Society, Member, 2016 to 2017, (International)
  • International Corrosion Prevention Symposium (CORSYM) 2017, Treasurer, 2016 to 2017, (International)
  • Institute of Materials Malaysia (IMM), Oridinary Member, 2017, (National)
  • Society of Engineering Education Malaysia, Member, 2018 to 2019, (National)

ADMINISTRATIVE DUTIES
(Role), (Level), (Start date),(End Date).


  • Penyelaras Program Sarjana Kejuruteraan (Materials), Faculty, 01/10/2019 to 01/11/2020
  • Ahli Biro bagi Jawatankuasa Kajian Dasar Pendidikan Negara (JKDPN) Kementerial Pendidikan Malaysia, National, 01/10/2018 to 30/04/2019
  • Working Committee for Society of Engineering Education Malaysia (SEEM), National, 06/06/2018 to 01/04/2020
  • Committee Member of Center for Research in Engineering Education Development (CREED), Faculty, 12/04/2018 to 31/12/2019
  • Treasurer International Conference on the Science and Engineering of Materials (ICoSEM 2019), International, 01/01/2018 to 31/12/2019
  • AJK Erasmus Program, Faculty, 01/01/2018 to 31/12/2019
  • Treasurer for Centre of Advanced Materials (CAM), Faculty, 01/01/2017 to 31/12/2019
  • Chairman for Centre of Advanced Materials Postgraduate Symposium 2018, National, 01/01/2017 to 31/12/2018 (Centre of Advanced Materials Postgraduate Symposium 2017)
  • Secretary for Materials Lecture Competition 2017 Organization, National, 01/01/2017 to 31/12/2017 (Materials Lecture Competition 2017)
  • Treasurer for International Corrosion Prevention Symposium 2017, International, 18/11/2016 to 31/12/2017 (International Corrosion Prevention Symposium for Research Scholars 2017)
  • Committee Member for International Conference on the Science and Engineering of Materials 2017, International, 15/11/2016 to 31/12/2017 (International Conference on the Science and Engineering of Materials 2017)
  • Pengerusi Jawatankuasa Buletin Jabatan Kejuruteraan Mekanik, Faculty, 22/08/2016 to 31/12/2016 (Jawatankuasa Buletin Jabatan Kejuruteraan Mekanik)
  • Penyelaras Alumni Jabatan Kejuruteraan Mekanik, Faculty, 22/08/2016 to 31/12/2017 (Alumni Jabatan Kejuruteraan Mekanik)
  • Penyelaras Projek Tahun Akhir Jabatan Kejuruteraan Mekanik, Faculty, 04/08/2016 to 31/12/2019 (Projek Tahun Akhir Jabatan Kejuruteraan Mekanik)
  • Treasurer for Advances in Materials and Processing Technologies Conference 2016, International, 01/01/2016 to 31/12/2016 (Advances in Materials and Processing Technologies Conference 2016)
  • Secretary for Materials Lecture Competition 2016 Organization, National, 01/01/2016 to 31/12/2016 (Materials Lecture Competition 2016)
  • Academic Advisor (AVIS), Faculty, 16/03/2015 to 31/12/2015 (Academic Advisory System)
  • Secretary, ICoSEM 2015, International, 01/01/2015 to 31/12/2015 (International Conference on the Science and Engineering of Materials 2015)

AREAS OF EXPERTISE
(Area).


  • Metals and Metal Alloy Materials (corrosion, alloying, electrochemistry)


RECENT SELECTED PUBLICATIONS
(Publication).


Chapter in Book

2012
  • N. L. Sukiman, X. Zhou, N. Birbilis, A.E. Hughes, J. M. C. Mol, S. J. Garcia, X. Zhou, and G. E. Thompson, Durability and Corrosion of Aluminium and Its Alloys: Overview, Property Space, Techniques and Developments, Aluminium Alloys - New Trends in Fabrication and Applications, 2012) 
Article in Academic Journals

2018
  • Wong, KH; Chong, WT; Sukiman, NL; Shiah, YC; Poh, SC; Sopian, K; Wang, WC 2018. Experimental and simulation investigation into the effects of a flat plate deflector on vertical axis wind turbine. ENERGY CONVERSION AND MANAGEMENT (ISI-Indexed)

2017
  • Sarraf, M; Razak, BA; Crum, R; Gamez, C; Ramirez, B; Abu Kasim, NHB; Nasiri-Tabrizi, B; Gupta, V; Sukiman, NL; Basirun, WJ 2017. Adhesion measurement of highly-ordered TiO2 nanotubes on Ti-6Al-4V alloy. PROCESSING AND APPLICATION OF CERAMICS (ISI-Indexed)
  • B Ali, MFM Sabri, SM Said, NL Sukiman, I Jauhari & N Soin, High impact reliability and high temperature performance of Fe and Bi added Sn-1Ag-0.5Cu solder alloys. Journal of Materials Science: Materials in Electronics, 1-9. doi: 10.1007/s10854-017-6412-x (2017) (ISI-Indexed)
  • Ali, B; Sabri, MFM; Said, SM; Mahdavifard, MH; Sukiman, NL; Jauhari, I 2017. Microstructural Modification of Sn-0.7Cu Solder Alloys by Fe/Bi-Addition for Achieving High Mechanical Performance. JOURNAL OF ELECTRONIC MATERIALS (ISI-Indexed)
  • Ali, B; Sabri, M; Said, SM; Sukiman, NL; Jauhari, I; Soin, N 2017. High impact reliability and high temperature performance of Fe and Bi added Sn-1Ag-0.5Cu solder alloys. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (ISI-Indexed)
  • Wong, KH; Chong, WT; Sukiman, NL; Poh, SC; Shiah, YC; Wang, CT 2017. Performance enhancements on vertical axis wind turbines using flow augmentation systems: A review. RENEWABLE SUSTAINABLE ENERGY REVIEWS (ISI-Indexed)
  • Ali, B; Sabri, MFM; Sukiman, NL; Jauhari, I 2017. Microhardness and shear performance of Fe/Bi-bearing SAC105 solder alloys under high temperature aging. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (ISI-Indexed)

2016
  • Ali, B., Sabri, M. F. M., Jauhari, I., Sukiman, N. L. 2016. Impact toughness, hardness and shear strength of Fe and Bi added Sn-1Ag-0.5Cu lead-free solders. Microelectronics Reliability (ISI-Indexed)
  • B Ali, MFM Sabri, I Jauhari, NL Sukiman, Impact toughness, hardness and shear strength of Fe and Bi added Sn-1Ag-0.5Cu lead-free solders, Microelectronics Reliability, DOI:10.1016/j.microrel.2016.05.004, (2016) (ISI-Indexed)
  • B Ali, MFM Sabri, NL Sukiman, I Jauhari, Microhardness and shear performance of Fe/Bi-bearing SAC105 solder alloys under high temperature aging, Mater Sci: Mater Electron (2016), doi:10.1007/s10854-016-5511-4 (2016) (ISI-Indexed)

2015
  • Ching, Y. C., Rahman, A., Ching, K. Y., Sukiman, N. L., Chuah, C. H. 2015. Preparation and Characterization of Polyvinyl Alcohol-Based Composite Reinforced with Nanocellulose and Nanosilica Bioresources (ISI-Indexed)

2014
  • Sukiman, N. L., Gupta, R. K., Zhang, R., Buchheit, R. G., Birbilis, N. 2014. Influence of microalloying additions on Al-Mg alloy. Part 2: Phase analysis and sensitisation behaviour Corrosion Engineering Science and Technology. (Tier 3, Impact Factor = 0.494) (ISI-Indexed)
  • Sukiman, N. L., Gupta, R. K., Buchheit, R. G., Birbilis, N. 2014. Influence of microalloying additions on Al-Mg alloy. Part 1: Corrosion and electrochemical response Corrosion Engineering Science and Technology. (Tier 3, Impact Factor = 0.494) (ISI-Indexed)
  • N.L. Sukiman, RK. Gupta, R.G. Buchheit, N. Birbilis, Influence of microalloying additions on Al-Mg alloy. Part 2: Phase analysis and sensitisation behavior, Corrosion Science, Engineering and Technology 49(4) 263-268 (ISI-Indexed)
  • N.L. Sukiman, R.K. Gupta, R.G. Buchheit, N. Birbilis, The influence of microalloying additions on Al-Mg alloy. Part 1: Corrosion and electrochemical response, Corrosion Engineering, Science & Technology, 49(4) 254-262 (ISI-Indexed)

2013
  • Y. Wang, R.K. Gupta, N.L. Sukiman, R. Zhang, C.H.J. Davies and N. Birbilis, Influence of alloyed Nd content on the corrosion of an Al-5Mg alloy, Corrosion Science, 73 (2013) 181 187 (ISI/SCOPUS Indexed Publication)
  • R.K. Gupta, Y. Wang, R. Zhang, N.L. Sukiman, C.H.J. Davies, and N. Birbilis (2013) Imparting Sensitization Resistance to an Al-5Mg Alloy via Neodymium Additions. Corrosion: January 2013, Vol. 69, No. 1, pp. 4-8 (ISI/SCOPUS Indexed Publication)
  • N.L. Sukiman, H. Shi, R.G. Buchheit, N. Birbilis, Electrochemical and corrosion response of commercially pure aluminium alloyed with binary additions of strontium, Journal of Electrochemical Society, 160 (8) C1-C6 (2013) (ISI/SCOPUS Indexed Publication)
  • Sukiman, N. L., Shi, H., Gupta, R. K., Buchheit, R. G., Birbilis, N. 2013. Electrochemical and Corrosion Response of Commercially Pure Aluminum Alloyed with Binary Additions of Strontium Journal of the Electrochemical Society. (Tier 1, Impact Factor = 2.588) (ISI-Indexed)
  • Gupta, R. K., Wang, Y., Zhang, R., Sukiman, N. L., Davies, C. H. J., Birbilis, N. 2013. Imparting Sensitization Resistance to an Al-5Mg Alloy via Neodymium Additions Corrosion. (Tier 1, Impact Factor = 1.772) (ISI-Indexed)
  • Wang, Y., Gupta, R. K., Sukiman, N. L., Zhang, R., Davies, C. H. J., Birbilis, N. 2013. Influence of alloyed Nd content on the corrosion of an Al-5Mg alloy Corrosion Science. (Tier 1, Impact Factor = 3.615) (ISI-Indexed)

2012
  • R. K. Gupta, N. L. Sukiman, K.M. Fleming, M.A. Gibson, and N. Birbilis, 'Electrochemical Behavior and Localized Corrosion Associated with Mg2si Particles in Al and Mg Alloys', ECS Electrochemistry Letters, 1 (2012), B1-B3 (ISI/SCOPUS Indexed Publication)
  • R. K. Gupta, N. L. Sukiman, M. K. Cavanaugh, B. R. W. Hinton, C. R. Hutchinson, and N. Birbilis, 'Metastable Pitting Characteristics of Aluminium Alloys Measured Using Current Transients During Potentiostatic Polarisation', Electrochimica Acta, 66 (2012), 245-54 (ISI/SCOPUS Indexed Publication)
Proceeding

2010
  • N. L. Sukiman, N. Birbilis, and R. G. Buchheit, 'Corrosion Maps for Aluminium Alloys', (Adelaide, SA, 2010), pp. 762-67 (SCOPUS-Indexed)

AREAS OF RESEARCH
(Project title), (Role), (From)-(Until), (Level), (Source).


  • Empowering Teaching and Learning at Faculty of Engineering UM, Consultant, 2018 - 2020, RU Geran - Fakulti Program, (National)
  • Formulation and optimization of palm-based TMP ester blend as bio-based lubricant for engine oil, Consultant, 2018 - 2020, RU Geran - Fakulti Program, (National)
  • The corrosion study of Mg alloys with the influenced of protein, amino acids and glucose in buffered Hank s solution at 37 C for biomedical applications, Consultant, 2018 - 2020, RU Geran - Fakulti Program, (National)
  • A Study On The Assessment Process Of Final Year Project At Faculty Of Engineering Um, Principal Investigator(PI), 2018 - 2020, Private Funding, (National)
  • Mechanism Of Chemical And Structural Degradation Of Polyurethane In Simulated Body Fluid, Consultant, 2017 - 2020, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC)), (University)
  • Modelling of Hydrate Formation in Pipelines, Consultant, 2017 - 2019, Bantuan Kecil Penyelidikan (BKP), (National)
  • Enhancement Of Biofuel Production From Tropical Biodiversity Sources, Principal Investigator(PI), 2017 - 2020, Grand Challenge - SBS (Equitable Society), (University)
  • Electrochemical Response of Retrogression and Re-aging (RRA) heat treated high strength aluminium alloys, Principal Investigator(PI), 2016 - 2018, Postgraduate Research Grant (PPP) - Research, (National)
  • The design, computational simulation and testing of a slanted blades cross axis wind turbine system, Principal Investigator(PI), 2016 - 2018, Postgraduate Research Grant (PPP) - Research, (National)
  • Tribocorrosion Characterization For Sustainable And Durable Cast Aluminium Alloys In Internal Combustion Engine, Principal Investigator(PI), 2015 - 2019, Fundamental Research Grant Scheme (FRGS), (National)
  • Corrosion Behavior Of Nano-textured Surface And Effect On Spectrally Selective Solar Absorber Performance, Principal Investigator(PI), 2015 - 2019, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC)), (University)
  • Synergistic Effect Of Nanographene On Rheology And Lubricating Mechanism Of Biobased Lubricant, Consultant, 2015 - 2019, Fundamental Research Grant Scheme (FRGS), (National)
  • Study On Relations Between Microstructural And Rheological Properties Of Nanocrystalline Cellulose Based Nanocomposites, Consultant, 2015 - 2019, Fundamental Research Grant Scheme (FRGS), (National)
  • Effect Of Single/duplex Stage Heat Treatment And Thermal Oxidation On The Microstructure And Properties Of Ti6al4v Alloy, Consultant, 2014 - 2016, Geran Penyelidikan Universiti Malaya (UMRG) - AFR (Frontier Science), (University)
  • Feasibility of Green and Fuel Economy Engine Oil Derived from Bio-Based Lubricant, Consultant, 2014 - 2016, Bantuan Kecil Penyelidikan (BKP), (National)
  • METALLURGY RESEARCH-CORROSION, Principal Investigator(PI), 2008 - 2009, Centre of Research , (National)

AWARDS AND RECOGNITIONS
(Name of Award), (Awarding Institution), (Year Awarded), (Level).


  • Jury for Materials Lecture Competition 2019, Centre of Advanced Materials UM, 2019, (University)
  • Jury for Biosymposium 2019, Faculty of Science UM, 2019, (University)
  • Juara Kejohanan Badminton Piala Dekan Fakulti Kejuruteraan 2018, Faculty of Engineering, 2018, (University)
  • Jury for Materials Lecture Competition, University of Malaya, 2018, (University)
  • Jury for International Research Innovation, Invention and Solution Exposition (Iriise) 2018, University of Malaya, 2018, (National)
  • Jury for Beyond Engineering Innovation (Begin) Challenge, University of Malaya, 2018, (National)
  • Juri Pertandingan Poster Persidangan Kebangsaan Perancangan Bandar Bersepadu 2017, Universiti Malaya, 2017, (National)
  • Chairperson for Cathodic Protection Session At International Corrosion Prevention Symposium 2017 , Nace International, 2017, (International)
  • Panel of Jury for Biosymposium 2017, Faculty of Science, 2017, (University)
  • Panel of Jury for Materials Lecture Competition 2017 (University Level), Faculty of Engineering, 2017, (University)
  • Gangsa - Acara Badminton Berpasukan Di Kejohanan Sukan Staf Antara Universiti Malaysia (Sukum) Ke-42, Kementerian Pengajian Tinggi, 2017, (National)
  • Peringkat Kumpulan - Acara Badminton Berpasukan Di Karnival Sukan Staf Universiti Malaya 2017, Universiti Malaya, 2017, (University)
  • Peringkat Kumpulan - Acara Badminton Berpasukan Di Karnival Sukan Staf Universiti Malaya 2016, Universiti Malaya, 2016, (University)
  • Master of Ceremony for Materials Lecture Competition 2016, Institute of Materials Malaysia, 2016, (National)
  • Perigkat Suku Akhir - Acara Badminton Berpasukan Di Kejohanan Sukan Staf Antara Universiti Malaysia (Sukum) Ke-41, Kementerian Pengajian Tinggi, 2016, (National)
  • Panel of Jury for Tribology Poster Competition, Malaysia Tribology Society, 2016, (National)
  • Panel of Interview, Ministry of Education, Malaysia, 2015, (Government)
  • Panel of Jury, Engineering 5 Minute Poster Competition, Faculty of Engineering, UM, 2015, (Ptj)
  • Panel of Jury, Materials Lecture Competition, University of Malaya, 2015, (National)

PRESENTATIONS
(Title), (Event), (Date Presented), (Organiser), (Level).


PRESENTER
  • Corrosion Maps for Aluminium Alloys, Corrosion And Prevention 2010, 2010-11-14 to 2010-11-17, (International)
  • Corrosion maps for aluminium alloys: Defining property space and the role of microstructure and chemistry in corrosion, 62nd Annual Meeting of the International Society of Electrochemistry, 2011-09-11 to 2011-09-16, International Society of Electrochemistry, (International)
  • Corrosion maps for aluminium alloys: Defining the property space and the role of microstructure and chemistry in corrosion, Pacific Rim Meeting on Electrochemical and Solid-State Science, 2012-10-07 to 2012-10-12, The Electrochemical Society, (International)
  • General aspects of the corrosion of aluminium alloys: Performance of experimental alloys, Corrosion and Prevention 2012, 2012-11-11 to 2012-11-14, Australasian Corrosion Association, (International)
  • An Insight Study on Corrosion Behaviour of Porous Copper Foam Brazing , Center of Advanced Materials Postgraduate Symposium, 2018-09-26 to 2018-09-26, Center of Advanced Materials, (University)
  • Iron and Bismuth Addition Effect on Corrosion Behavior of Sn-1Ag-0.5Cu Lead-Free Solder, Center of Advanced Materials Postgraduate Symposium, 2018-09-26 to 2018-09-26, Center of Advanced Materials , (University)
  • Development of Al-Cu Die-attach nanoalloy as Pb-free solution, Center of Advanced Materials Postgraduate Symposium 2018, 2018-09-26 to 2018-09-26, Center of Advanced Materials, (University)
INVITED SPEAKER
  • Understanding the Aluminium Alloys Property Space, Guest Lecture at Monash University School of Engineering, 2016-10-18 to 2016-10-18, Monash University Malaysia, (National)
ORAL
  • Influence of microalloying additions on Al-Mg alloy , International Conference on Science and Engineering of Materials (ICoSEM2015), 2015-11-16 to 2015-11-18, University of Malaya, (International)
  • Electrochemical Response of Retrogression and Re-Aging (RRA) Heat Treated AA7075 Aluminium Alloy, Mechanical Engineering and Science Postgraduate International Conference 2016, 2016-09-28 to 2016-09-29, Universiti Teknologi MARA, (International)
  • Corrosion Behavior of Sn-1Ag-0.5Cu Solder Alloy with the Addition of Fe and Bi, Pacific Rim Meeting on Electrochemical and Solid-State Science 2016, 2016-10-02 to 2016-10-07, The Electrochemical Society, (International)
  • Corrosion maps for aluminium alloys: Defining the property space and the role of microstructure and chemistry in corrosion, International Conference on Functional Materials and Steel 2016, 2016-12-04 to 2016-12-06, ICFMS2016, (International)
POSTER
  • Corrosion Behavior of Aluminium Bronze Alloy with Addition of Silicon Prepared by Powder Metallurgy, Advances in Materials and Processing Technologies Conference 2016, 2016-11-08 to 2016-11-11, AMPT2016, (International)
OTHERS
  • IMM Conference on Insulation, IMM Conference on Insulation, 2017-03-16 to 2017-03-16, Institute of Materials Malaysia, (National)

EVALUATION ACTIVITIES
(Description), (Evaluation Activity),(Year).


  • Internal Examiner for M.Eng Thesis - Logapriya Logaratnaim, Thesis ,  (2019 - 2019)
  • Reviewer for ICoSEM 2019, Article In Proceeding ,  (2019 - 2019)
  • Team Mentor for Beyond Engineering Innovation (BEGIN) Challenge 2018, Project ,  (2018 - 2018)
  • Internal Examiner for M.Eng Thesis - Shiu Kai Ping, Thesis ,  (2018 - 2018)
  • Internal Examiner for M.Eng Thesis - Dennis C Yborde, Thesis ,  (2018 - 2018)
  • Working Committee for Society of Engineering Education Malaysia (SEEM), Association ,  (2018 - 2020)
  • EXAMINATION OF MASTER OF ENGINEERING SCIENCE DISSERTATION: NUR SUHAILA BINTI ROSLI (KGA130086), Thesis ,  (2016 - 2016)
  • International Conference on Mechanical Engineering and Electrical Systems 2016, Article In Proceeding ,  (2016 - 2016)
  • Journal of Science and Technology, Article In Journal ,  (2016 - 2016)
  • International Conference on Design and Concurrent Engineering (IDECON 2016), Article In Proceeding ,  (2016 - 2016)
  • International Conference on Mechanical Engineering and Electrical Systems 2016, Article In Proceeding ,  (2016 - 2016)
  • EXAMINATION OF MASTER OF ENGINEERING SCIENCE DISSERTATION: JACKY LEE JIA LI (KGA140034), Thesis ,  (2016 - 2016)
  • International Conference on Mechanical Engineering and Electrical Systems, Article In Proceeding ,  (2015 - 2015)
  • International Conference on the Science and Engineering of Materials 2015, Article In Journal ,  (2015 - 2015)
  • Journal of Science and Technology (JST), Article In Journal ,  (2015 - 2015)

SUPERVISION


POST GRADUATE STUDENT
(Name of Degree), (Name of Candidates), (Title of Thesis), (Academic Session)

Ongoing
  • Master Degree, Bakhtiar Ali, Effect of Iron and Bismuth Addition on the Microstructure and Mechanical Properties of SAC105 Solder Under Severe Thermal Environment, 2016/2017
  • Master Degree, Imran Ali, QUALITY EVOLUTION OF PLASTIC PRODUCT AVAILABLE IN THE PAKISTAN, 2016/2017
  • Doctoral Degree (phd), Wong Kok Hoe, THE DESIGN, COMPUTATIONAL SIMULATION AND TESTING OF AN OMNI-DIRECTION-GUIDE-VANES ASSEMBLY FOR VERTICAL AXIS WIND TURBINE SYSTEM, 2016/2017
  • Master Degree, Mohd Azham Bin Mohd Alwi, Investigation Of combustion And Emission And Emission Characteristics Of Diesel - Biodiesel - Alcohol Terniary Blends In A CI Engine, 2016/2017
  • Master Degree, Muhamad Izudin Bin Rifli, ELECTROCHEMICAL ANALYSIS OF LASER WELDING OF DISSIMILAR MATERIALS, 2016/2017
  • Doctoral Degree (phd), Wong Kok Hoe, Wind Turbine Design, 2015/2016
  • Doctoral Degree (phd), Nur Amirah Mohd Zahri, Corrosion of Nano-Textured Sola Absorber, 2015/2016

TEACHING
(Course Title), (Academic Session), (No of Student), (No of Contact Hours).


FIRST DEGREE
  • MAKMAL ENGINEERING LABORATORY III, 2013/2014(2), 24, 24
  • PHASE DIAGRAM AND TRANSFORMATIONS, 2013/2014(1), 28, 21
  • PRODUCTION OF MATERIAL, 2013/2014(2), 20, 42
  • PHASE DIAGRAM AND TRANSFORMATIONS, 2008/2009(1), 26, 42
  • BASIC MATERIALS SCIENCE, 2007/2008(2), 80, 42
  • BASIC MATERIALS SCIENCE, 2007/2008(1), 80, 42
  • BASIC MATERIALS SCIENCE, 2006/2007(2), 80, 42