Curriculum Vitae

DR. MOHD NASHRUL BIN MOHD ZUBIR

Senior Lecturer
  • Department of Mechanical Engineering
    Faculty of Engineering
  • nashrul
  • 0379675204

BIOGRAPHY

Dr. Mohd Nashrul Mohd Zubir received his B. Eng. (Hons.) in Mechanical Engineering from University of Malaya (UM) in 2006. Upon graduation, he spent a short stint in SONY EMCS Malaysia as Design Engineer. He was then offered a scholarship under SLAB/SLAI fellowship program to pursue his postgraduate study in Monash University Australia where he obtained his MSc in Mechanical and Aerospace Engineering in 2010. Upon returning to Malaysia he further pursued his Ph.D. in heat transfer discipline at UM under similar scholarship program by which he was awarded the degree in 2015. Currently, he is a Senior Lecturer with University of Malaya (UM). His research interest spans from active and passive heat transfer enhancement, nanomaterial synthesis for heat transfer and gas separation applications, solar based renewable energy to fouling mitigation and desalination system. Dr. Nashrul currently has more than 80 ISI publications which mostly under Tier 1 and 2 ranking. 

AREAS OF EXPERTISE

  • HEAT AND MASS TRANSFER
    Engineering, Engineering Principles, Thermodynamics
  • COOLING AND HEATING ENGINEERING
    Engineering, Mechanical Engineering, Mechanical Engineering Technology
  • SURFACE ENGINEERING
    Engineering, Manufacturing And Industrial Engineering, Manufacturing Engineering
  • DIRECT AND STORED SOLAR ENERGY TECHNOLOGY
    Engineering, Energy Resources And Engineering, Renewable Energy Resources
  • NANO STRUCTURED MATERIALS
    Applied Science And Technology, Nanotechnology, Nano Materials, Characterisation And Manufacturing
  • GREEN TECHNOLOGY/LOW CARBON TECHNOLOGY
    Applied Social Science And Humanities, Management, Science, Technology And Innovation (sti) Management

ACADEMIC QUALIFICATION

  • Doctoral Degree (PhD)
    Universiti Malaya (um)
  • MASTER OF ENGINEERING SCIENCE (RESEARCH), (RESEARCH)
    Monash University, Australia
  • MASTER DEGREE, (Kejuruteraan Rekabentuk)
    Monash University, Australia
  • BMECHENG, (KEJURUTERAAN MEKANIKAL)
    Universiti Malaya (um)

ADMINISTRATIVE DUTIES

  • Supervisor
    12 Jan 2024 - 12 Jan 2027 (University Malaya)
  • Supervisor
    01 Sep 2022 - 31 Aug 2026 (University Malaya)
  • Supervisor
    03 Jul 2023 - 02 Jul 2026 (University Malaya)
  • Supervisor
    12 May 2023 - 11 May 2026 (National)
  • Supervisor
    27 Dec 2022 - 26 Dec 2025 (University Malaya)
  • Supervisor
    12 Jul 2022 - 11 Jul 2025 (University Malaya)
  • Chairperson for candidature defense of postgraduate students
    14 Jun 2016 - present (Department of Mechanical Engineering, Faculty of Engineering)
  • PENYELIA & MODERATOR UNTUK KURSUS INTEGRATED DESIGN PROJECT (IDP) BAGI PROGRAM IJAZAH SARJANA MUDA KEJURUTERAAN MEKANIK PADA SESI 2023/2024
    21 Oct 2024 - 20 May 2025 (Department)
  • Supervisor
    26 Apr 2022 - 25 Apr 2025 (University Malaya)
  • PELANTIKAN SEBAGAI PENYELIA & MODERATOR UNTUK PROJEK PELAJAR TAHUN AKHIR BAGI PROGRAM IJAZAH SARJANA MUDA KEJURUTERAAN MEKANIK PADA SESI 2023/2024
    21 Oct 2024 - 20 Apr 2025 (Department)
  • Supervisor
    31 Mar 2022 - 29 Mar 2025 (University Malaya)
  • Committee Members
    22 Mar 2024 - 21 Mar 2025 (Department of Mechanical Engineering, Faculty of Engineering)
  • PELANTIKAN AHLI JAWATANKUASA PEMINDAHAN KREDIT 2023/2024
    07 Jul 2023 - 31 Dec 2024 (Department)
  • Pelantikan Sebagai Ahli Jawatankuasa ICT PTj Di Fakulti Kejuruteraan
    27 Mar 2023 - 31 Dec 2024 (Department of Mechanical Engineering, Faculty of Engineering)
  • Supervisor
    26 Nov 2021 - 26 Nov 2024 (University Malaya)
  • AHLI MESYUARAT JAWATANKUASA PENILAIAN KEWANGAN TENDER
    14 Oct 2024 - 14 Oct 2024 (Department of Mechanical Engineering, Faculty of Engineering)
  • Supervisor
    21 Sep 2021 - 20 Sep 2024 (University Malaya)
  • Supervisor
    31 Aug 2021 - 30 Aug 2024 (University Malaya)
  • Project Member
    02 Jul 2024 - 30 Jul 2024 (University Malaya)
  • Supervisor
    27 Dec 2023 - 29 Feb 2024 (University Malaya)
  • Supervisor
    27 Dec 2023 - 29 Feb 2024 (University Malaya)
  • Committee Members
    01 Jan 2023 - 31 Dec 2023 (Faculty)
  • Coordinator
    01 Jan 2023 - 31 Dec 2023 (Department)
  • Supervisor
    01 Jan 2023 - 31 Dec 2023 (Faculty)
  • Task Force Member
    01 Jan 2023 - 31 Dec 2023 (Department of Mechanical Engineering, Faculty of Engineering)
  • Coordinator
    25 Oct 2022 - 31 Dec 2023 (Department)
  • Coordinator
    25 Oct 2022 - 30 Dec 2023 (Department)
  • Supervisor
    01 Oct 2022 - 28 Feb 2023 (Department)
  • Coordinator
    01 Jan 2022 - 31 Dec 2022 (Department of Mechanical Engineering, Faculty of Engineering)
  • Adviser for Postgraduate club FKUM
    07 Dec 2017 - 07 Dec 2022 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Members
    11 Sep 2022 - 11 Sep 2022 (Department of Mechanical Engineering, Faculty of Engineering)
  • Supervisor
    25 Aug 2022 - 02 Sep 2022 (Department of Mechanical Engineering, Faculty of Engineering)
  • PENGERUSI JAWATANKUASA PENILAIAN TEKNIKAL & KEWANGAN PEROLEHAN BEKALAN/ PERKHIDMATAN MELEBIHI RM20,000 - RM50,000
    02 Aug 2021 - 02 Aug 2022 (Department of Mechanical Engineering, Faculty of Engineering)
  • Supervisor
    21 Jun 2022 - 30 Jul 2022 (Department)
  • Ahli Jawatankuasa Spesifikasi JPPHB
    02 Jul 2020 - 02 Jul 2022 (University Malaya)
  • Supervisor
    21 Jun 2022 - 30 Jun 2022 (Department)
  • Supervisor
    21 Jun 2022 - 30 Jun 2022 (Department)
  • Supervisor
    01 Sep 2021 - 20 Apr 2022 (Department)
  • Supervisor
    06 Oct 2021 - 13 Apr 2022 (Department)
  • Supervisor
    31 Jan 2022 - 11 Feb 2022 (Department of Mechanical Engineering, Faculty of Engineering)
  • Supervisor
    10 Jan 2022 - 10 Feb 2022 (University Malaya)
  • Ahli task force bagi Pelan Transformasi UM: Reimaging Education @UM
    10 Mar 2021 - 31 Dec 2021 (University Malaya)
  • KOORDINATOR E-FAIL KURSUS
    24 Nov 2017 - 23 Nov 2021 (Department of Mechanical Engineering, Faculty of Engineering)
  • task force member for center of research in industry
    22 Oct 2019 - 22 Oct 2021 (Department of Mechanical Engineering, Faculty of Engineering)
  • Self Assessment Report (SAR) Committee member for Engineering accreditation council (EAC) - Student section
    01 Jan 2018 - 03 Jan 2021 (Department of Mechanical Engineering, Faculty of Engineering)
  • Penyelaras Semakan Dokumen 'E-course file' Jabatan
    01 Jul 2019 - 31 Dec 2020 (Department of Mechanical Engineering, Faculty of Engineering)
  • Ahli jawatan kuasa STEM@FKUM
    29 Nov 2018 - 01 Dec 2020 (University Malaya)
  • SIRIM Working group member on PCD for imaging equipment
    07 Nov 2018 - 06 Nov 2020 (National)
  • AHLI JAWATANKUASA INDUSTRIAL TALK
    21 Sep 2017 - 20 Sep 2020 (Department of Mechanical Engineering, Faculty of Engineering)
  • AHII JAWAIANKUASA PELAKSANA MAKMAL DI JABATAN KEJURUTERAAN MEKANIK, FAKULTI KEJURUTERAAN, UNIVERSITI MALAYA
    11 Sep 2017 - 10 Sep 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • Jawatan kuasa kerja bagi water meter
    14 Jun 2017 - 13 Jun 2019 (National)
  • Jawatankuasa Teknikal bagi Potable Water Systems and Components
    08 Mar 2017 - 07 Mar 2019 (National)
  • AHLI JAWATANKUASA PELAKSANA MAKMAL
    16 Feb 2017 - 15 Feb 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • AJK PELAKSANA BAGI KURSUS GXEX1417/GIG1005 (JALINAN MASYARAKAT)
    19 Sep 2017 - 18 Sep 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Academic advisory panel
    20 Jul 2017 - 20 Jul 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Jury for Beyond Engineering Innovation (BEGIN) Challenge 2018
    11 Apr 2018 - 11 May 2018 (University Malaya)
  • Assessor Panel for re-accreditation of postgraduate program
    15 Feb 2018 - 19 Apr 2018 (University Malaya)
  • Panel penilai UM three minute challenge (UM3MT)
    02 Apr 2018 - 02 Apr 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • industrial training supervisor
    07 Jul 2017 - 31 Dec 2017 (University Malaya)
  • Internal examiner for PhD candidate for Ghulamullah Khan (KHA120069)
    05 Sep 2017 - 07 Dec 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Internal examiner of MSc candidate for MD RUHUL AMIN (KGA140020)
    08 May 2017 - 09 Aug 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Internal examiner of MSc candidate SYEDA REHAM SHAHED (KGA140006)
    17 May 2017 - 31 Jul 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Assessor Panel for reaccreditation of undergraduate program
    08 Feb 2017 - 30 May 2017 (University Malaya)
  • The duty include reviewing the standard for valve inspection and installation on close conduit
    30 Mar 2016 - 12 Apr 2017 (National)
  • Member of self assessment report (SAR) update committee for Mechanical Engineering division
    04 Jan 2016 - 14 Dec 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • representing HOD in PhD Viva examination
    11 Nov 2016 - 11 Nov 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Internal examiner for PhD candidate
    30 Sep 2016 - 30 Sep 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Emcee for briefing session with newly registered mechanical engineering student for 2016/2017 session
    01 Sep 2016 - 01 Sep 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • committee member in telephonic briefing session with upcoming undergraduate student for 2016/2017 intake
    26 Aug 2016 - 28 Aug 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Representing head of department in Viva meeting
    17 Aug 2016 - 17 Aug 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Appointment as the Internal Examiner for the candidate MOHAMMAD MONIRUL ISLAM (KGA140048).
    03 Aug 2016 - 03 Aug 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • APPOINTMENT AS PANEL EVALUATOR OF PPP GRANT CYCLE 1_2016
    30 Jun 2016 - 30 Jun 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Panel evaluator for ENGINEUS 2016 program
    17 May 2016 - 17 May 2016 (Department of Mechanical Engineering, Faculty of Engineering)

MEMBERSHIPS

  • CHARTED ENGINEER (CENG), CHARTERED ENGINEER
    2024 to 2025 (International)
  • ELSEVIER , REVIEWER
    Since 2016 (International)
  • SIRIM, COMMITTEE MEMBERS
    Since 2016 (National)
  • BOARD OF ENGINEER MALAYSIA, MEMBER
    Since 2009 (National)

AWARD AND STEWARDSHIP

  • Certificate of Excellent Service
    2022, Universiti Malaya
  • Bronze Award: Digitalised Invention Innovation and Design Johor 2021 (diiid Johor 2021): Empowering Global Digitalisation Through Innovation
    2021, UITM Johor,  (National)
  • Gold Award, International Summit of Innovation and Design Exposition, 2020
    2020, university of malaya,  (International)
  • Reviewer Recognition
    2019, Publon,  (International)
  • Certificate of Excellent Service
    2019, Universiti Malaya
  • Session Chair for International Conference On Sustainable Energy and Green Technology (isegt 2018) On 11-14 December 2018, Kuala Lumpur, Malaysia
    2018, ISEGT ,  (International)
  • Silver Award, Learning Improvement and Teaching Enhancement Research (liter) Conference, 4th & 5 Th April, Paum Clubhouse, Kuala Lumpur
    2018, University of Malaya,  (National)
  • Certificate of Appreciation in Recognition to Valuable Contribution to Tribology Poster Competition
    2016, Malaysian Tribology Society,  (Department)

PUBLICATIONS

Article in Journal
WoS
  1. AbdRabbuh, O. Almatar; Kazi, S. N.; Zubir, Mohd Nashrul Bin Mohd; Chowdhury, Zaira; Abdelrazek, Ali H. (2024). Heat transfer inside annular passages: A comparison of noncircular and fully circular passages using eco-friendly graphene nanofluid, CASE STUDIES IN THERMAL ENGINEERING. 60. doi:10.1016/j.csite.2024.104659
  2. Abdullah, Shekh; Zubir, Mohd Nashrul Bin Mohd; Muhamad, Mohd Ridha Bin; Newaz, Kazi Md Salim; Oztop, Hakan F.; Yu, Lim Jing; Alam, Md Shadab; Shaikh, Kaleemullah (2024). Synthesis, Characterization and Permeance Evaluation of Nanofiller-Enhanced Polyvinyl Alcohol/Potassium Formate-Based Membranes, JOURNAL OF POLYMERS AND THE ENVIRONMENT. . doi:10.1007/s10924-023-03111-6
  3. Alam, Md Shadab; Zubir, Mohd Nashrul Bin Mohd; Bin Muhamad, Mohd Ridha; Kazi, Salim Newaz; Oztop, Hakan F.; Abdullah, Shekh; Shaikh, Kaleemullah (2024). A technological review of dew point evaporative cooling: experimental, analytical, numerical and optimization perspectives, JOURNAL OF BUILDING ENGINEERING. 91. doi:10.1016/j.jobe.2024.109544
  4. Ibrahim, Farah Arina; Muhamad, Mohd Ridha; Mohd Zubir, Mohd Nashrul; Bin Omar, Mohd; Siri, Zailan; Hasan, Rony Mehedy; Eid, Mohamed Moustafa Abdelhalim Ahmed (2024). Experimental Analysis of the Improvement of Heat Transfer in Tube Heat Exchangers Via Passive Flow Generators Using Wire Coil Inserts, ASME JOURNAL OF HEAT AND MASS TRANSFER. 146(6). doi:10.1115/1.4065115
  5. Khan, Wajahat Ahmed; Kazi, Salim Newaz; Chowdhury, Zaira Zaman; Zubir, Mohd Nashrul Mohd; Wong, Yew Hoong; Shaikh, Kaleemullah; Nawaz, Rab (2024). Application of carbon nanofluids in non-concentrating solar thermal collectors: A critical review of experimental investigations, SOLAR ENERGY MATERIALS AND SOLAR CELLS. 276. doi:10.1016/j.solmat.2024.113046
  6. Zhang, Hanwen; Ganesan, P.; Sharma, R. K.; Zubir, Mohd Nashrul Bin Mohd; Badruddin, Irfan Anjum; Chong, Wen Tong (2024). A novel overflow channel design of manifold cold plate for lithium-ion battery: A CFD study, PROCESS SAFETY AND ENVIRONMENTAL PROTECTION. 189, 648-663. doi:10.1016/j.psep.2024.06.092
  7. Abdullah, Shekh; Zubir, Mohd Nashrul Bin Mohd; Bin Muhamad, Mohd Ridha; Newaz, Kazi Md Salim; Oztop, Hakan F.; Alam, Md Shadab; Shaikh, Kaleemullah (2023). Technological development of evaporative cooling systems and its integration with air dehumidification processes: A review, ENERGY AND BUILDINGS. 283. doi:10.1016/j.enbuild.2023.112805
  8. Ahmed, Syed Muzamil; Kazi, S. N.; Khan, Ghullamullah; Ahmed, Waqar; Zubir, M. N. M. (2023). Heat transfer and friction loss of flowing kenaf core non-wood pulp fibre suspensions to curb reject papers, HEAT AND MASS TRANSFER. 59(4), 551-566. doi:10.1007/s00231-022-03281-4
  9. Eid, M. M. A. A.; Zubir, M. N. M.; Muhamad, M. R.; Kazi, S. N.; Aznam, S. Mt; Rony, M. H.; Ibrahim, F. A.; Alam, Md. Shadab; Sadri, Rad (2023). Experimental and numerical investigations on the effect of a novel internal surface micro-grooving toward improving convective heat transfer performance of tube heat exchangers, PHYSICS OF FLUIDS. 35(7). doi:10.1063/5.0150094
  10. Huq, Tahsinul; Ong, Hwai Chyuan; Chew, Bee Teng; Kazi, Salim Newaz; Zubir, Mohd Nashrul Mohd; Ong, Zhi Chao; Azlan, Nuralmeera Balqis Binti Mohd (2023). Graphene nanoplatelet nanofluids stabilised by hybridisation with graphene oxide: preparation, stability, and performance in flat plate solar thermal collector, JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY. . doi:10.1007/s10973-022-11866-8
  11. Mansoor, M. A.; Munawar, K.; Naeem, R.; Sarih, N. M.; Asghar, M. A.; Haider, A.; Zubir, M. N. M.; Zaharinie, T. (2023). Aerosol-assisted facile fabrication of bimetallic Cr2O3-Mn2O3 thin films for photoelectrochemical water splitting, NEW JOURNAL OF CHEMISTRY. 47(17), 8347-8354. doi:10.1039/d2nj06274g
  12. Munawar, Khadija; Mansoor, Muhammad Adil; Naeem, Rabia; Rizwan, Muhammad; Ahmad, Muhammad Shakeel; Zaharinie, Tuan; Zubir, Mohd Nashrul Mohd; Aspanut, Zarina (2023). Effect of deposition temperature on topography and electrochemical water oxidation of NiO thin films, THIN SOLID FILMS. 782. doi:10.1016/j.tsf.2023.140031
  13. Rony, M. H.; Ibrahim, F. A.; Bin Muhamad, M. R.; Eid, M. M. A. A.; Zubir, M. N. M.; Ibrahim, S. (2023). Pipe internal grooving using closed magnetic field system: A novel method, MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK. 54(9), 1082-1091. doi:10.1002/mawe.202100388
  14. Shaikh, Kaleemullah; Kazi, Salim Newaz; Zubir, Mohd Nashrul Mohd; Abd Razak, Bushroa; Wong, Kokhoe; Wong, Yew Hoong; Khan, Wajahat Ahmed; Abdullah, Shekh; Alam, Md Shadab (2023). Investigation of zirconium (Zr) coated heat exchanger surface for the enhancement of heat transfer and retardation of mineral fouling, JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS. 153. doi:10.1016/j.jtice.2023.105246
  15. Shaikh, Kaleemullah; Kazi, Salim Newaz; Zubir, Mohd Nashrul Mohd; Wong, Kok Hoe; Khan, Wajahat Ahmed; Abdullah, Shekh; Alam, Md Shadab; Keat, Siew Boon (2023). Retardation of CaCO3 fouling on heat exchanger surface using water-based cloves-functionalized multiwall carbon nanotubes (C-MWCNT) nanofluids, JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY. . doi:10.1007/s10973-023-12551-0
  16. Shaikh, Kaleemullah; Kazi, Salim Newaz; Zubir, Mohd Nashrul Mohd; Wong, KokHoe; Yusoff, Syamimi Aisyah Binti Mohd; Khan, Wajahat Ahmed; Alam, Md Shadab; Abdullah, Shekh; Shukri, Muhd Hakimie Bin Muhd (2023). Mitigation of CaCO3 fouling on heat exchanger surface using green functionalized carbon nanotubes (GFCNT) coating, THERMAL SCIENCE AND ENGINEERING PROGRESS. 42. doi:10.1016/j.tsep.2023.101878
  17. Shaikh, Kaleemullah; Newaz, Kazi Md Salim; Zubir, Mohd Nashrul Mohd; Wong, Kok Hoe; Khan, Wajahat Ahmed; Abdullah, Shekh; Alam, Md Shadab; Sugumaran, Luvindran (2023). A review of recent advancements in the crystallization fouling of heat exchangers, JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY. . doi:10.1007/s10973-023-12544-z
  18. Zulkiflie, Farah Aqilah Md; Sarih, Norazilawati Muhamad; Hashim, Nur Awanis; Mohd Zubir, Mohd Nashrul; Abdullah, Shekh; Amin, Aida Sabrina Mohd (2023). Moisture Adsorption-Desorption Behaviour in Nanocomposite Copolymer Films, POLYMERS. 15(14). doi:10.3390/polym15142998
  19. AbdRabbuh, O. Almatar; Abdelrazek, Ali H.; Kazi, S. N.; Zubir, Mohd Nashrul Mohd (2022). Nanofluids thermal performance in the horizontal annular passages: a recent comprehensive review, JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY. . doi:10.1007/s10973-022-11389-2
  20. Eid, Mohamed Moustafa Abdelhalim Ahmed; Zubir, Mohd Nashrul Mohd; Muhamad, Mohd Ridha Bin; Newaz, Kazi Md. Salim; Ahmadi, Goodarz; Rony, Md. Mehedy Hasan; Ibrahim, Farah Arina; Alam, Md Shadab; Abdullah, Shekh (2022). Passive heat transfer augmentation in conduits by surface modification: a review, JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY. 147(24), 14601-14620. doi:10.1007/s10973-022-11642-8
  21. Kumar, L. Harish; Kazi, S. N.; Masjuki, H. H.; Zubir, M. N. M. (2022). A review of recent advances in green nanofluids and their application in thermal systems, CHEMICAL ENGINEERING JOURNAL. 429. doi:10.1016/j.cej.2021.132321
  22. Kumar, L. Harish; Kazi, S. N.; Masjuki, H. H.; Zubir, M. N. M.; Jahan, Afrin; Sean, Oon Cheen (2022). Experimental study on the effect of bio-functionalized graphene nanoplatelets on the thermal performance of liquid flat plate solar collector, JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY. . doi:10.1007/s10973-020-10527-y
  23. Lah, Nurul Akmal Che; Murthy, Puhanes; Zubir, Mohd Nashrul Mohd (2022). The physical and optical investigations of the tannic acid functionalised Cu-based oxide nanostructures, SCIENTIFIC REPORTS. 12(1). doi:10.1038/s41598-022-14281-z
  24. Mallah, Abdul Rahman; Zubir, M. N. M.; Alawi, Omer A.; Kazi, S. N.; Ahmed, W.; Sadri, R.; Kasaeian, Alibakhsh (2022). Experimental study on the effects of multi-resonance plasmonic nanoparticles for improving the solar collector efficiency, RENEWABLE ENERGY. 187, 1204-1223. doi:10.1016/j.renene.2022.01.051
  25. Muhammad, Aisha; Ali, Mohammed A. H.; Turaev, Sherzod; Shanono, Ibrahim Haruna; Hujainah, Fadhl; Zubir, Mohd Nashrul Mohd; Faiz, Muhammad Khairi; Faizal, Erma Rahayu Mohd; Abdulghafor, Rawad (2022). Novel Algorithm for Mobile Robot Path Planning in Constrained Environment, CMC-COMPUTERS MATERIALS & CONTINUA. 71(2), 2697-2719. doi:10.32604/cmc.2022.020873
  26. Akram, N., Montazer, E., Kazi, S. N., Soudagar, M. E. M., Ahmed, W., Zubir, M. N. M., . . . Sarsam, W. S. (2021). Experimental investigations of the performance of a flat-plate solar collector using carbon and metal oxides based nanofluids. Energy, 227, 19. doi: 10.1016/j.energy.2021.120452
  27. Al'Aidrus, Sharifah Nuriza Binti Syed Muhammad Naquib; Bin Siri, Zailan; Zubir, Mohd Nashrul Bin Mohd (2021). MARANGONI CONVECTION OF NANOFLUID IN A WAVY TRAPEZOIDAL ENCLOSURE, THERMAL SCIENCE. 25, S339-S345. doi:10.2298/TSCI21S2339A
  28. Kumar, L. H., Kazi, S. N., Masjuki, H. H., Zubir, M. N. M., Jahan, A., & Bhinitha, C. (2021). Energy, exergy and economic analysis of liquid flat-plate solar collector using green covalent functionalized graphene nanoplatelets. Applied Thermal Engineering, 192, 19. doi: 10.1016/j.applthermaleng.2021.116916
  29. Mansoor, M. A., Hamzah, K., Naeem, R., Zubir, M., Yahaya, N. A., Yusof, F. B., . . . Ming, H. N. (2021). A Tri-Metallic (Mn-Co-Ti) Oxide Photoanode with Improved Photo-Conversion Efficiency. Russian Journal of Inorganic Chemistry, 66(6), 806-813. doi: 10.1134/s0036023621060139
  30. Naeem, R., Mansoor, M. A., Munawar, K., Adnan, A., Zaharinie, T., & Zubir, M. N. M. (2021). Versatile Fabrication of Binary Composite SnO2-Mn2O3 Thin Films by AACVD for Synergistic Photocatalytic Effect. Journal of Electronic Materials, 50(7), 3897-3906. doi: 10.1007/s11664-021-08897-6
  31. Ahmed, S. M., Kazi, S. N., Khan, G., Akram, N., Dahari, M., Zubir, M. N. M., . . . Zaharinie, T. (2020). Experimental investigation on drag reduction of flowing crop suspensions of the pulp fibers in circular pipe heat exchanger. Particulate Science and Technology, 38(4), 443-453. doi: 10.1080/02726351.2018.1564093
  32. Ahmed, Syed Muzamil; Kazi, Salim Newaz; Khan, Ghullamullah; Akram, Naveed; Dahari, Mahidzal; Zubir, Mohd Nashrul Mohd; Ahmad, Pervaiz; Zaharinie, Tuan (2020). Experimental investigation on drag reduction of flowing crop suspensions of the pulp fibers in circular pipe heat exchanger, PARTICULATE SCIENCE AND TECHNOLOGY. 38(4), 443-453. doi:10.1080/02726351.2018.1564093
  33. Akram, N., Sadri, R., Kazi, S. N., Zubir, M. N. M., Ridha, M., Ahmed, W., . . . Arzpeyma, M. (2020). A comprehensive review on nanofluid operated solar flat plate collectors. Journal of Thermal Analysis and Calorimetry, 139(2), 1309-1343. doi: 10.1007/s10973-019-08514-z
  34. Jannifar, A., Zubir, M. N. M., & Kazi, S. N. (2020). An innovative approach for conducting experimental modal analysis (EMA) in running harmonic for structural modal identification. Measurement, 159, 12. doi: 10.1016/j.measurement.2020.107795
  35. Mallah, A. R., Zubir, M. N. M., Alawi, O. A., Kazi, M. S. N., Ahmed, S. M., Oon, C. S., & Mohamad, A. B. (2020). An innovative, high-efficiency silver/silica nanocomposites for direct absorption concentrating solar thermal power. International Journal of Energy Research, 44(12), 9438-9453. doi: 10.1002/er.4994
  36. Munawar, K., Mansoor, M. A., McKee, V., Zaharinie, T., Zubir, M. N. M., Aspanut, Z., . . . Mazhar, M. (2020). Optical and photocatalytic properties of biomimetic cauliflowered Ca2Mn3O8-CaO composite thin films. Journal of Solid State Chemistry, 290, 11. doi: 10.1016/j.jssc.2020.121552
  37. Munawar, K., Mansoor, M. A., Olmstead, M. M., Zaharinie, T., Zubir, M. N. M., Haniffa, M., . . . Mazhar, M. (2020). Fabrication of Ag-ZnO composite thin films for plasmonic enhanced water splitting. Materials Chemistry and Physics, 255, 11. doi: 10.1016/j.matchemphys.2020.123220
  38. Ahmed, S. M., Kazi, S. N., Khan, G., Zubir, M. N. M., Dahari, M., Ibrahim, S., . . . Chowdhury, Z. Z. (2019). TOWARD IMPROVED HEAT DISSIPATION OF THE TURBULENT REGIME OVER BACKWARD-FACING STEP FOR THE Al2O3-WATER NANOFLUIDS: An Experimental Approach. Thermal Science, 23(3), 1779-1789. doi:10.2298/tsci170606236a
  39. Ahmed, Syed Muzamil; Kazi, Salim Newaz; Khan, Ghulamullah; Zubir, Mohd Nashrul Mohd; Dahari, Mahidzal; Ibrahim, Suriani; abu Talip, Mohammad Sofian; Ahmad, Pervaiz; Chowdhury, Zaira Zaman (2019). TOWARD IMPROVED HEAT DISSIPATION OF THE TURBULENT REGIME OVER BACKWARD-FACING STEP FOR THE Al2O3-WATER NANOFLUIDS: An Experimental Approach, THERMAL SCIENCE. 23(3), 1779-1789. doi:10.2298/TSCI170606236A
  40. Akram, N., Sadri, R., Kazi, S. N., Ahmed, S. M., Zubir, M. N. M., Ridha, M., . . . Tong, G. B. (2019). An experimental investigation on the performance of a flat-plate solar collector using eco-friendly treated graphene nanoplatelets-water nanofluids. Journal of Thermal Analysis and Calorimetry, 138(1), 609-621. doi:10.1007/s10973-019-08153-4
  41. Mallah, A. R., Zubir, M. N. M., Alawi, O. A., Newaz, K. M. S., Badry, A. B. M. (2019). Plasmonic nanofluids for high photothermal conversion efficiency in direct absorption solar collectors: Fundamentals and applications. Solar Energy Materials and Solar Cells, 201, 31. doi:10.1016/j.solmat.2019.110084
  42. Ahmed, S. M., Kazi, S. N., Khan, G., Sadri, R., Dahari, M., Zubir, M. N. M., . . . Ibrahim, R. (2018). Effect of various refining processes for Kenaf Bast non-wood pulp fibers suspensions on heat transfer coefficient in circular pipe heat exchanger. Heat and Mass Transfer, 54(3), 875-882. doi:10.1007/s00231-017-2176-3
  43. Ahmed, Syed Muzamil; Kazi, S. N.; Khan, Ghulamullah; Sadri, Rad; Dahari, Mahidzal; Zubir, M. N. M.; Sayuti, M.; Ahmad, Pervaiz; Ibrahim, Rushdan (2018). Effect of various refining processes for Kenaf Bast non-wood pulp fibers suspensions on heat transfer coefficient in circular pipe heat exchanger (vol 54, pg 875, 2018), HEAT AND MASS TRANSFER. 54(3), 883-883. doi:10.1007/s00231-017-2211-4
  44. Jannifar, A., Zubir, M. N. M., Kazi, S. N., Zulkifli, N. W. M., Ahmad, N. (2018). Investigation on the feasibility of eliminating harmonic excitation signal en-route to performing experimental modal analysis (EMA) under operational condition. Journal of Mechanical Science and Technology, 32(7), 3009-3021. doi:10.1007/s12206-018-0604-z
  45. Lah, Nurul A. C.; Zubir, Mohd N. M.; Samykano, Mahendran A. L. (2018). Engineered Nanomaterial in Electronics and Electrical Industries, HANDBOOK OF NANOMATERIALS FOR INDUSTRIAL APPLICATIONS. , 324-364. doi:10.1016/B978-0-12-813351-4.00021-3
  46. Mallah, A. R., Kazi, S. N., Zubir, M. N. M., Badarudin, A. (2018). Blended morphologies of plasmonic nanofluids for direct absorption applications. Applied Energy, 229, 505-521. doi:10.1016/j.apenergy.2018.07.113
  47. Mansoor, M. A., McKee, V., Yusof, F. B., Lim, S. P., Zubir, M. N. M., Ming, H. N., Mazhar, M. (2018). Lanthanum-titanium oxide composite from a single molecular cluster: Non-enzymatic mesoporous electrochemical nitrite ion sensor. Polyhedron, 156, 332-341. doi:10.1016/j.poly.2018.09.045
  48. Sadri, R., Hosseini, M., Kazi, S. N., Bagheri, S., Abdelrazek, A. H., Ahmadi, G., . . . Abidin, N. I. Z. (2018). A facile, bio-based, novel approach for synthesis of covalently functionalized graphene nanoplatelet nano-coolants toward improved thermo-physical and heat transfer properties. Journal of Colloid and Interface Science, 509, 140-152. doi:10.1016/j.jcis.2017.07.052
  49. Shazali, Siti Shafiah; Amiri, Ahmad; Zubir, Mohd Nashrul Mohd; Rozali, Shaifulazuar; Zabri, Mohd Zakuan; Sabri, Mohd Faizul Mohd (2018). Colloidal stability measurements of graphene nanoplatelets covalently functionalized with tetrahydrofurfuryl polyethylene glycol in different organic solvents, CURRENT APPLIED PHYSICS. 18(2), 209-219. doi:10.1016/j.cap.2017.10.007
  50. Shazali, Siti Shafiah; Amiri, Ahmad; Zubir, Mohd Nashrul Mohd; Rozali, Shaifulazuar; Zabri, Mohd Zakuan; Sabri, Mohd Faizul Mohd; Soleymaniha, Mohammadreza (2018). Investigation of the thermophysical properties and stability performance of non-covalently functionalized graphene nanoplatelets with Pluronic P-123 in different solvents, MATERIALS CHEMISTRY AND PHYSICS. 206, 94-102. doi:10.1016/j.matchemphys.2017.12.008
  51. Shazali, Siti Shafiah; Amiri, Ahmad; Zubir, Mohd. Nashrul Mohd; Rozali, Shaifulazuar; Zabri, Mohd Zakuan; Sabri, Mohd Faizul Mohd (2018). Facile hydrothermal method for synthesizing nitrogen-doped graphene nanoplatelets using aqueous ammonia: dispersion, stability in solvents and thermophysical performances, MATERIALS RESEARCH EXPRESS. 5(3). doi:10.1088/2053-1591/aab527
  52. Shazali, Siti Shafiah; Rozali, Shaifulazuar; Amiri, Ahmad; Zubir, Mohd Nashrul Mohd; Sabri, Mohd Faizul Mohd; Zabri, Mohd Zakuan (2018). Evaluation on stability and thermophysical performances of covalently functionalized graphene nanoplatelets with xylitol and citric acid, MATERIALS CHEMISTRY AND PHYSICS. 212, 363-371. doi:10.1016/j.matchemphys.2018.03.040
  53. Yamashita, Naomi; Ota, Yuya; Salleh, Faiz; Navaneethan, Mani; Shimomura, Masaru; Murakami, Kenji; Ikeda, Hiroya (2018). Facile hydrothermal method for synthesizing nitrogen-doped graphene nanoplatelets using aqueous ammonia: dispersion, stability in solvents and thermophysical perfomances, MATERIALS RESEARCH EXPRESS. 5(5). doi:10.1088/2053-1591/aac59f
  54. Amiri, A., Shanbedi, M., Rafieerad, A. R., Rashidi, M. M., Zaharinie, T., Zubir, M. N. M., Kazi, S. N., Chew, B. T. (2017). Functionalization and exfoliation of graphite into mono layer graphene for improved heat dissipation. Journal of the Taiwan Institute of Chemical Engineers, 71, 480-493.
  55. Amiri, A., Zubir, M. N. M., Dimiev, A. M., Teng, K. H., Shanbedi, M., Kazi, S. N., Bin Rozali, S. (2017). Facile, environmentally friendly, cost effective and scalable production of few-layered graphene. Chemical Engineering Journal, 326, 1105-1115.
  56. Gharehkhani, S., Yarmand, H., Goodarzi, M. S., Shirazi, S. F. S., Amiri, A., Zubir, M. N. M., Solangi, K., Ibrahim, R., Kazi, S. N., Wongwises, S. (2017). Experimental investigation on rheological, momentum and heat transfer characteristics of flowing fiber crop suspensions. International Communications in Heat and Mass Transfer, 80, 60-69.
  57. Hosseini, M., Sadri, R., Kazi, S. N., Bagheri, S., Zubir, N., Teng, C. B., Zaharinie, T. (2017). Experimental Study on Heat Transfer and Thermo-Physical Properties of Covalently Functionalized Carbon Nanotubes Nanofluids in an Annular Heat Exchanger: A Green and Novel Synthesis. Energy Fuels, 31(5), 5635-5644.
  58. Sadri, R., Hosseini, M., Kazi, S. N., Bagheri, S., Ahmed, S. M., Ahmadi, G., Zubir, N., Sayuti, M., Dahari, M. (2017). Study of environmentally friendly and facile functionalization of graphene nanoplatelet and its application in convective heat transfer. Energy Conversion and Management, 150, 26-36. doi: 10.1016/j.enconman.2017.07.036
  59. Sadri, R., Hosseini, M., Kazi, S. N., Bagheri, S., Zubir, N., Ahmadi, G., Dahari, M., Zaharinie, T. (2017). A novel, eco-friendly technique for covalent functionalization of graphene nanoplatelets and the potential of their nanofluids for heat transfer applications. Chemical Physics Letters, 675, 92-97.
  60. Sadri, R., Hosseini, M., Kazi, S. N., Bagheri, S., Zubir, N., Solangi, K. H., Zaharinie, T., Badarudin, A. (2017). A bio-based, facile approach for the preparation of covalently functionalized carbon nanotubes aqueous suspensions and their potential as heat transfer fluids. Journal of Colloid and Interface Science, 504, 115-123.
  61. Sadri, R., Kamali, K. Z., Hosseini, M., Zubir, N., Kazi, S. N., Ahmadi, G., Dahari, M., Huang, N. M., Golsheikh, A. M. (2017). Experimental study on thermo-physical and rheological properties of stable and green reduced graphene oxide nanofluids: Hydrothermal assisted technique. Journal of Dispersion Science and Technology, 38(9), 1302-1310.
  62. Amiri, Ahmad; Kazi, S. N.; Shanbedi, Mehdi; Zubir, Mohd Nashrul Mohd; Yarmand, Hooman; Chew, B. T. (2015). Transformer oil based multi-walled carbon nanotube-hexylamine coolant with optimized electrical, thermal and rheological enhancements, RSC ADVANCES. 5(130), 107222-107236. doi:10.1039/c5ra17687e
  63. Amiri, Ahmad; Sadri, Rad; Shanbedi, Mehdi; Ahmadi, Goodarz; Kazi, S. N.; Chew, B. T.; Zubir, Mohd Nashrul Mohd (2015). Synthesis of ethylene glycol-treated Graphene Nanoplatelets with one-pot, microwave-assisted functionalization for use as a high performance engine coolant, ENERGY CONVERSION AND MANAGEMENT. 101, 767-777. doi:10.1016/j.enconman.2015.06.019
  64. Gharehkhani, Samira; Sadeghinezhad, Emad; Kazi, Salim Newaz; Yarmand, Hooman; Badarudin, Ahmad; Safaei, Mohammad Reza; Zubir, Mohd Nashrul Mohd (2015). Basic effects of pulp refining on fiber properties-A review, CARBOHYDRATE POLYMERS. 115, 785-803. doi:10.1016/j.carbpol.2014.08.047
  65. Kazi, Salim Newaz; Badarudin, Ahmad; Zubir, Mohd Nashrul Mohd; Ming, Huang Nay; Misran, Misni; Sadeghinezhad, Emad; Mehrali, Mohammad; Syuhada, Nur Ily (2015). Investigation on the use of graphene oxide as novel surfactant to stabilize weakly charged graphene nanoplatelets, NANOSCALE RESEARCH LETTERS. 10. doi:10.1186/s11671-015-0882-7
  66. Solangi, K. H.; Kazi, S. N.; Luhur, M. R.; Badarudin, A.; Amiri, A.; Sadri, Rad; Zubir, M. N. M.; Gharehkhani, Samira; Teng, K. H. (2015). A comprehensive review of thermo-physical properties and convective heat transfer to nanofluids, ENERGY. 89, 1065-1086. doi:10.1016/j.energy.2015.06.105
  67. Zubir, M. N. M., Badarudin, A., Kazi, S. N., Huang, N. M., Misran, M., Sadeghinezhad, E., Mehrali, M., Yusoff, N. (2015). Highly dispersed reduced graphene oxide and its hybrid complexes as effective additives for improving thermophysical property of heat transfer fluid. International Journal of Heat and Mass Transfer, 87, 284-294.
  68. Zubir, M. N. M., Badarudin, A., Kazi, S. N., Misran, M., Amiri, A., Sadri, R., Khalid, S. (2015). Experimental investigation on the use of highly charged nanoparticles to improve the stability of weakly charged colloidal system. Journal of Colloid and Interface Science, 454, 245-255.
  69. Zubir, Mohd Nashrul Mohd; Badarudin, A.; Kazi, S. N.; Huang Nay Ming; Misran, Misni; Sadeghinezhad, Emad; Mehrali, Mohammad; Syuhada, N. I.; Gharehkhani, Samira (2015). Experimental investigation on the use of reduced graphene oxide and its hybrid complexes in improving closed conduit turbulent forced convective heat transfer, EXPERIMENTAL THERMAL AND FLUID SCIENCE. 66, 290-303. doi:10.1016/j.expthermflusci.2015.03.022
  70. Mehrali, Mohammad; Sadeghinezhad, Emad; Latibari, Sara Tahan; Kazi, Salim Newaz; Mehrali, Mehdi; Zubir, Mohd Nashrul Bin Mohd; Metselaar, Hendrik Simon Cornelis (2014). Investigation of thermal conductivity and rheological properties of nanofluids containing graphene nanoplatelets, NANOSCALE RESEARCH LETTERS. 9. doi:10.1186/1556-276X-9-15
  71. Mehrali, Mohammad; Sadeghinezhad, Emad; Latibari, Sara Tahan; Mehrali, Mehdi; Togun, Hussein; Zubir, M. N. M.; Kazi, S. N.; Metselaar, Hendrik Simon Cornelis (2014). Preparation, characterization, viscosity, and thermal conductivity of nitrogen-doped graphene aqueous nanofluids, JOURNAL OF MATERIALS SCIENCE. 49(20), 7156-7171. doi:10.1007/s10853-014-8424-8
  72. Sadeghinezhad, Emad; Kazi, Salim N.; Badarudin, Ahmad; Togun, Hussein; Zubir, Mohd N. M.; Oon, Cheen S.; Gharehkhani, Samira (2014). Sustainability and environmental impact of ethanol as a biofuel, REVIEWS IN CHEMICAL ENGINEERING. 30(1), 51-72. doi:10.1515/revce-2013-0024
  73. Sadri, Rad; Ahmadi, Goodarz; Togun, Hussein; Dahari, Mahidzal; Kazi, Salim Newaz; Sadeghinezhad, Emad; Zubir, Nashrul (2014). An experimental study on thermal conductivity and viscosity of nanofluids containing carbon nanotubes, NANOSCALE RESEARCH LETTERS. 9. doi:10.1186/1556-276X-9-151
  74. Sadeghinezhad, E.; Kazi, S. N.; Badarudin, A.; Oon, C. S.; Zubir, M. N. M.; Mehrali, Mohammad (2013). A comprehensive review of bio-diesel as alternative fuel for compression ignition engines, RENEWABLE & SUSTAINABLE ENERGY REVIEWS. 28, 410-424. doi:10.1016/j.rser.2013.08.003
  75. Oon, C. S.; Togun, Hussein; Kazi, S. N.; Badarudin, A.; Zubir, M. N. M.; Sadeghinezhad, E. (2012). Numerical simulation of heat transfer to separation air flow in an annular pipe, INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER. 39(8), 1176-1180. doi:10.1016/j.icheatmasstransfer.2012.06.019
  76. Zubir, Mohd Nashrul Mohd; Shirinzadeh, Bijan (2009). Development of a high precision flexure-based microgripper, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY. 33(4), 362-370. doi:10.1016/j.precisioneng.2008.10.003
  77. Zubir, Mohd Nashrul Mohd; Shirinzadeh, Bijan; Tian, Yanling (2009). A new design of piezoelectric driven compliant-based microgripper for micromanipulation, MECHANISM AND MACHINE THEORY. 44(12), 2248-2264. doi:10.1016/j.mechmachtheory.2009.07.006
  78. Zubir, Mohd Nashrul Mohd; Shirinzadeh, Bijan; Tian, Yanling (2009). Development of a novel flexure-based microgripper for high precision micro-object manipulation, SENSORS AND ACTUATORS A-PHYSICAL. 150(2), 257-266. doi:10.1016/j.sna.2009.01.016
  79. Zubir, Mohd Nashrul Mohd; Shirinzadeh, Bijan; Tian, Yanling (2009). Development of novel hybrid flexure-based microgrippers for precision micro-object manipulation, REVIEW OF SCIENTIFIC INSTRUMENTS. 80(6). doi:10.1063/1.3147062
Scopus
  1. Khan W.A., Kazi S.N., Chowdhury Z.Z., Mohd Zubir M.N., Wong Y.H., Shaikh K., Nawaz R., Hasnain S.U. (2025). Carbon nanomaterials in coatings: A review focusing thin film photovoltaic solar cells, Materials Science in Semiconductor Processing. 185. doi:10.1016/j.mssp.2024.108929
  2. AbdRabbuh O.A., Kazi S.N., Mohd Zubir M.N.B., Chowdhury Z., Abdelrazek A.H. (2024). Heat transfer inside annular passages: A comparison of non-circular and fully circular passages using eco-friendly graphene nanofluid, Case Studies in Thermal Engineering. 60. doi:10.1016/j.csite.2024.104659
  3. Abdullah S., Zubir M.N.B.M., Muhamad M.R.B., Newaz K.M.S., Oztop H.F., Yu L.J., Alam M.S., Shaikh K. (2024). Synthesis, Characterization and Permeance Evaluation of Nanofiller-Enhanced Polyvinyl Alcohol/Potassium Formate-Based Membranes, Journal of Polymers and the Environment. 32(5), 2299-2312. doi:10.1007/s10924-023-03111-6
  4. Alam M.S., Mohd Zubir M.N.B., Muhamad M.R.B., Kazi S.N., Oztop H.F., Abdullah S., Shaikh K. (2024). A technological review of dew point evaporative cooling: experimental, analytical, numerical and optimization perspectives, Journal of Building Engineering. 91. doi:10.1016/j.jobe.2024.109544
  5. Ibrahim F.A., Muhamad M.R., Zubir M.N.M., Omar M.B., Siri Z., Hasan R.M., Eid M.M.A.A. (2024). Experimental Analysis of the Improvement of Heat Transfer in Tube Heat Exchangers Via Passive Flow Generators Using Wire Coil Inserts, ASME Journal of Heat and Mass Transfer. 146(6). doi:10.1115/1.4065115
  6. Khan W.A., Kazi S.N., Chowdhury Z.Z., Mohd Zubir M.N., Wong Y.H., Shaikh K., Nawaz R. (2024). Application of carbon nanofluids in non-concentrating solar thermal collectors: A critical review of experimental investigations, Solar Energy Materials and Solar Cells. 276. doi:10.1016/j.solmat.2024.113046
  7. Khan W.A., Shaikh K., Nawaz R., Kazi S.N., Mohd Zubir M.N. (2024). Enhancement of heat transfer with nanofluids and its applications in heat exchangers, Advances in Heat Transfer. 57, 101-128. doi:10.1016/bs.aiht.2024.05.001
  8. Shaikh K., Khan W.A., Kazi S.N., Zubir M.N.M., Bhayo B.A., Razak B.A., Wong K.H., Nawaz R., Zulkifli M.F., Palaniapan J.K. (2024). Environmental and economic benefits due to mitigation of calcium carbonate (CaCO3) fouling on brass heat exchanger surface with titanium oxide (TiOx) coating, Powder Technology. 448. doi:10.1016/j.powtec.2024.120268
  9. Zhang H., Ganesan P., Sharma R.K., Zubir M.N.B.M., Badruddin I.A., Chong W.T. (2024). A novel overflow channel design of manifold cold plate for lithium-ion battery: A CFD study, Process Safety and Environmental Protection. 189, 648-663. doi:10.1016/j.psep.2024.06.092
  10. Abdullah S., Zubir M.N.B.M., Muhamad M.R.B., Newaz K.M.S., Oztop H.F., Alam M.S., Shaikh K. (2023). Technological development of evaporative cooling systems and its integration with air dehumidification processes: A review, Energy and Buildings. 283. doi:10.1016/j.enbuild.2023.112805
  11. Ahmed S.M., Kazi S.N., Khan G., Ahmed W., Zubir M.N.M. (2023). Heat transfer and friction loss of flowing kenaf core non-wood pulp fibre suspensions to curb reject papers, Heat and Mass Transfer/Waerme- und Stoffuebertragung. 59(4), 551-566. doi:10.1007/s00231-022-03281-4
  12. Eid M.M.A.A., Zubir M.N.M., Muhamad M.R., Kazi S.N., Aznam S.M., Rony M.H., Ibrahim F.A., Alam M.S., Sadri R. (2023). Experimental and numerical investigations on the effect of a novel internal surface micro-grooving toward improving convective heat transfer performance of tube heat exchangers, Physics of Fluids. 35(7). doi:10.1063/5.0150094
  13. Harish Kumar L., Kazi S.N., Masjuki H.H., Zubir M.N.M. (2023). 2D materials in phase change materials, Solar Energy Harvesting, Conversion, and Storage: Materials, Technologies, and Applications. , 143-170. doi:10.1016/B978-0-323-90601-2.00003-9
  14. Huq T., Ong H.C., Chew B.T., Kazi S.N., Zubir M.N.M., Ong Z.C., Azlan N.B.B.M. (2023). Graphene nanoplatelet nanofluids stabilised by hybridisation with graphene oxide: preparation, stability, and performance in flat plate solar thermal collector, Journal of Thermal Analysis and Calorimetry. 148(5), 2105-2118. doi:10.1007/s10973-022-11866-8
  15. Mansoor M.A., Munawar K., Naeem R., Sarih N.M., Asghar M.A., Haider A., Zubir M.N.M., Zaharinie T. (2023). Aerosol-assisted facile fabrication of bimetallic Cr2O3-Mn2O3 thin films for photoelectrochemical water splitting, New Journal of Chemistry. . doi:10.1039/d2nj06274g
  16. Md Zulkiflie F.A., Muhamad Sarih N., Hashim N.A., Mohd Zubir M.N., Abdullah S., Mohd Amin A.S. (2023). Moisture Adsorption Desorption Behaviour in Nanocomposite Copolymer Films, Polymers. 15(14). doi:10.3390/polym15142998
  17. Munawar K., Mansoor M.A., Naeem R., Rizwan M., Ahmad M.S., Zaharinie T., Zubir M.N.M., Aspanut Z. (2023). Effect of deposition temperature on topography and electrochemical water oxidation of NiO thin films, Thin Solid Films. 782. doi:10.1016/j.tsf.2023.140031
  18. Rony M.H., Ibrahim F.A., Bin Muhamad M.R., Eid M.M.A.A., Zubir M.N.M., Ibrahim S. (2023). Pipe internal grooving using closed magnetic field system: A novel method: Erzeugung von Rohrinnennuten mit einem geschlossenen Magnetfeldsystem: Eine neuartige Methode, Materialwissenschaft und Werkstofftechnik. 54(9), 1082-1091. doi:10.1002/mawe.202100388
  19. Shaikh K., Kazi S.N., Mohd Zubir M.N., Wong K., Binti Mohd Yusoff S.A., Ahmed Khan W., Shadab Alam M., Abdullah S., Bin Muhd Shukri M.H. (2023). Mitigation of CaCO3 fouling on heat exchanger surface using green functionalized carbon nanotubes (GFCNT) coating, Thermal Science and Engineering Progress. 42. doi:10.1016/j.tsep.2023.101878
  20. Shaikh K., Kazi S.N., Zubir M.N.M., Razak B.A., Wong K., Wong Y.H., Khan W.A., Abdullah S., Alam M.S. (2023). Investigation of zirconium (Zr) coated heat exchanger surface for the enhancement of heat transfer and retardation of mineral fouling, Journal of the Taiwan Institute of Chemical Engineers. 153. doi:10.1016/j.jtice.2023.105246
  21. Shaikh K., Kazi S.N., Zubir M.N.M., Wong K.H., Khan W.A., Abdullah S., Alam M.S., Keat S.B. (2023). Retardation of CaCO3 fouling on heat exchanger surface using water-based cloves-functionalized multiwall carbon nanotubes (C-MWCNT) nanofluids, Journal of Thermal Analysis and Calorimetry. . doi:10.1007/s10973-023-12551-0
  22. Shaikh K., Kazi S.N., Zubir M.N.M., Wong K.H., Khan W.A., Abdullah S., Alam M.S., Keat S.B., bin Mohd Fauzi M.S. (2023). Improvement of heat transfer and fouling retardation performance of heat exchanger using green functionalized graphene nanoplatelets additives, Journal of the Taiwan Institute of Chemical Engineers. 153. doi:10.1016/j.jtice.2023.105227
  23. Shaikh K., Newaz K.M.S., Zubir M.N.M., Wong K.H., Khan W.A., Abdullah S., Alam M.S., Sugumaran L. (2023). A review of recent advancements in the crystallization fouling of heat exchangers, Journal of Thermal Analysis and Calorimetry. 148(22), 12369-12392. doi:10.1007/s10973-023-12544-z
  24. AbdRabbuh O.A., Abdelrazek A.H., Kazi S.N., Zubir M.N.M. (2022). Nanofluids thermal performance in the horizontal annular passages: a recent comprehensive review, Journal of Thermal Analysis and Calorimetry. 147(21), 11633-11660. doi:10.1007/s10973-022-11389-2
  25. Che Lah N.A., Murthy P., Mohd Zubir M.N. (2022). The physical and optical investigations of the tannic acid functionalised Cu-based oxide nanostructures, Scientific Reports. 12(1). doi:10.1038/s41598-022-14281-z
  26. Eid M.M.A.A., Zubir M.N.M., Muhamad M.R.B., Newaz K.M.S., Ahmadi G., Rony M.M.H., Ibrahim F.A., Alam M.S., Abdullah S. (2022). Passive heat transfer augmentation in conduits by surface modification: a review, Journal of Thermal Analysis and Calorimetry. 147(24), 14601-14620. doi:10.1007/s10973-022-11642-8
  27. Kumar L.H., Kazi S.N., Masjuki H.H., Zubir M.N.M. (2022). A review of recent advances in green nanofluids and their application in thermal systems, Chemical Engineering Journal. 429. doi:10.1016/j.cej.2021.132321
  28. Kumar L.H., Kazi S.N., Masjuki H.H., Zubir M.N.M., Jahan A., Sean O.C. (2022). Experimental study on the effect of bio-functionalized graphene nanoplatelets on the thermal performance of liquid flat plate solar collector, Journal of Thermal Analysis and Calorimetry. 147(2), 1657-1674. doi:10.1007/s10973-020-10527-y
  29. Mallah A.R., Zubir M.N.M., Alawi O.A., Kazi S.N., Ahmed W., Sadri R., Kasaeian A. (2022). Experimental study on the effects of multi-resonance plasmonic nanoparticles for improving the solar collector efficiency, Renewable Energy. 187, 1204-1223. doi:10.1016/j.renene.2022.01.051
  30. Muhammad A., Ali M.A.H., Turaev S., Shanono I.H., Hujainah F., Zubir M.N.M., Faiz M.K., Faizal E.R.M., Abdulghafor R. (2022). Novel algorithm for mobile robot path planning in constrained environment, Computers, Materials and Continua. 71(2), 2697-2719. doi:10.32604/cmc.2022.020873
  31. Akram, N., Montazer, E., Kazi, S. N., Soudagar, M. E. M., Ahmed, W., Zubir, M. N. M., . . . Sarsam, W. S. (2021). Experimental investigations of the performance of a flat-plate solar collector using carbon and metal oxides based nanofluids. Energy, 227. doi: 10.1016/j.energy.2021.120452
  32. Al'Aidrus S.N.B.S.M.N., Siri Z.B., Zubir M.N.B.M. (2021). MARANGONI CONVECTION OF NANOFLUID IN A WAVY TRAPEZOIDAL ENCLOSURE, Thermal Science. 25(SpecialIssue 2), 339-345. doi:10.2298/TSCI21S2339A
  33. Kumar, L. H., Kazi, S. N., Masjuki, H. H., Zubir, M. N. M., Jahan, A., & Bhinitha, C. (2021). Energy, exergy and economic analysis of liquid flat-plate solar collector using green covalent functionalized graphene nanoplatelets. Applied Thermal Engineering, 192. doi: 10.1016/j.applthermaleng.2021.116916
  34. Mansoor, M. A., Hamzah, K., Naeem, R., Zubir, M. N. B. M., Yahaya, N. A., Yusof, F. B., . . . Ming, H. N. (2021). A Tri-Metallic (Mn Co Ti) Oxide Photoanode with Improved Photo-Conversion Efficiency. Russian Journal of Inorganic Chemistry, 66(6), 806-813. doi: 10.1134/S0036023621060139
  35. Naeem, R., Mansoor, M. A., Munawar, K., Adnan, A., Zaharinie, T., & Mohd Zubir, M. N. (2021). Versatile Fabrication of Binary Composite SnO2-Mn2O3 Thin Films by AACVD for Synergistic Photocatalytic Effect. Journal of Electronic Materials, 50(7), 3897-3906. doi: 10.1007/s11664-021-08897-6
  36. Oon, C. S., Kazi, S. N., Zubir, N., Badruddin, I. A., Kamangar, S., Heah, C. Y., . . . Husain, A. (2021). Fouling and fouling mitigation of mineral salt using bio-based functionalized graphene nano-plates. Journal of Thermal Analysis and Calorimetry, 146(1), 265-275. doi: 10.1007/s10973-020-09940-0
  37. Ahmed, S. M., Kazi, S. N., Khan, G., Akram, N., Dahari, M., Zubir, M. N. M., . . . Zaharinie, T. (2020). Experimental investigation on drag reduction of flowing crop suspensions of the pulp fibers in circular pipe heat exchanger. Particulate Science and Technology, 38(4), 443-453. doi:10.1080/02726351.2018.1564093
  38. Akram N., Sadri R., Kazi S.N., Zubir M.N.M., Ridha M., Ahmed W., Soudagar M.E.M., Arzpeyma M. (2020). A comprehensive review on nanofluid operated solar flat plate collectors, Journal of Thermal Analysis and Calorimetry. 139(2), 1309-1343. doi:10.1007/s10973-019-08514-z
  39. Jannifar A., Zubir M.N.M., Kazi S.N. (2020). An innovative approach for conducting experimental modal analysis (EMA) in running harmonic for structural modal identification, Measurement: Journal of the International Measurement Confederation. 159. doi:10.1016/j.measurement.2020.107795
  40. Mallah, A. R., Zubir, M. N. M., Alawi, O. A., Kazi, M. S. N., Ahmed, S. M., Oon, C. S., & Mohamad, A. B. (2020). An innovative, high-efficiency silver/silica nanocomposites for direct absorption concentrating solar thermal power. International Journal of Energy Research, 44(12), 9438-9453. doi: 10.1002/er.4994
  41. Munawar, K., Mansoor, M. A., McKee, V., Zaharinie, T., Mohd Zubir, M. N., Aspanut, Z., . . . Mazhar, M. (2020). Optical and photocatalytic properties of biomimetic cauliflowered Ca2Mn3O8 CaO composite thin films. Journal of Solid State Chemistry, 290. doi:10.1016/j.jssc.2020.121552
  42. Munawar, K., Mansoor, M. A., Olmstead, M. M., Zaharinie, T., Mohd Zubir, M. N., Haniffa, M., . . . Mazhar, M. (2020). Fabrication of Ag-ZnO composite thin films for plasmonic enhanced water splitting. Materials Chemistry and Physics, 255. doi: 10.1016/j.matchemphys.2020.123220
  43. Akram N., Sadri R., Kazi S.N., Ahmed S.M., Zubir M.N.M., Ridha M., Soudagar M., Ahmed W., Arzpeyma M., Tong G.B. (2019). An experimental investigation on the performance of a flat-plate solar collector using eco-friendly treated graphene nanoplatelets water nanofluids, Journal of Thermal Analysis and Calorimetry. 138(1), 609-621. doi:10.1007/s10973-019-08153-4
  44. Mallah A.R., Mohd Zubir M.N., Alawi O.A., Salim Newaz K.M., Mohamad Badry A.B. (2019). Plasmonic nanofluids for high photothermal conversion efficiency in direct absorption solar collectors: Fundamentals and applications, Solar Energy Materials and Solar Cells. 201. doi:10.1016/j.solmat.2019.110084
  45. Ahmed S.M., Kazi S.N., Khan G., Sadri R., Dahari M., Zubir M.N.M., Sayuti M., Ahmad P., Ibrahim R. (2018). Correction to: Effect of various refining processes for Kenaf Bast non-wood pulp fibers suspensions on heat transfer coefficient in circular pipe heat exchanger (Heat and Mass Transfer, (2018), 54, 3, (875-882), 10.1007/s00231-017-2176-3), Heat and Mass Transfer/Waerme- und Stoffuebertragung. 54(3), 883. doi:10.1007/s00231-017-2211-4
  46. Ahmed S.M., Kazi S.N., Khan G., Sadri R., Dahari M., Zubir M.N.M., Sayuti M., Ahmad P., Ibrahim R. (2018). Effect of various refining processes for Kenaf Bast non-wood pulp fibers suspensions on heat transfer coefficient in circular pipe heat exchanger, Heat and Mass Transfer/Waerme- und Stoffuebertragung. 54(3), 875-882. doi:10.1007/s00231-017-2176-3
  47. Ahmed S.M., Kazi S.N., Khan G., Zubir M.N.M., Dahari M., Ibrahim S., Talip M.S.A., Ahmad P., Chowdhury Z.Z. (2018). Toward improved heat dissipation of the turbulent regime over backward-facing step for the Alumina-water nanofluids - An experimental approach, Thermal Science. 2018, 1779-1789. doi:10.2298/TSCI170606236A
  48. Jannifar A., Zubir M.N.M., Kazi S.N., Zulkifli N.W.M., Ahmad N. (2018). Investigation on the feasibility of eliminating harmonic excitation signal en-route to performing experimental modal analysis (EMA) under operational condition, Journal of Mechanical Science and Technology. 32(7), 3009-3021. doi:10.1007/s12206-018-0604-z
  49. Lah N.A.C., Zubir M.N.M., Samykano M.A.L. (2018). Engineered nanomaterial in electronics and electrical industries, Handbook of Nanomaterials for Industrial Applications. , 324-364. doi:10.1016/B978-0-12-813351-4.00021-3
  50. Mallah A.R., Kazi S.N., Zubir M.N.M., Badarudin A. (2018). Blended morphologies of plasmonic nanofluids for direct absorption applications, Applied Energy. 229, 505-521. doi:10.1016/j.apenergy.2018.07.113
  51. Mansoor M.A., McKee V., Yusof F.B., Lim S.P., Zubir M.N.M., Ming H.N., Mazhar M. (2018). Lanthanum titanium oxide composite from a single molecular cluster: Non-enzymatic mesoporous electrochemical nitrite ion sensor, Polyhedron. 156, 332-341. doi:10.1016/j.poly.2018.09.045
  52. Sadri R., Hosseini M., Kazi S.N., Bagheri S., Abdelrazek A.H., Ahmadi G., Zubir N., Ahmad R., Abidin N.I.Z. (2018). A facile, bio-based, novel approach for synthesis of covalently functionalized graphene nanoplatelet nano-coolants toward improved thermo-physical and heat transfer properties, Journal of Colloid and Interface Science. 509, 140-152. doi:10.1016/j.jcis.2017.07.052
  53. Shazali S.S., Amiri A., Mohd Zubir M.N., Rozali S., Zabri M.Z., Mohd Sabri M.F., Soleymaniha M. (2018). Investigation of the thermophysical properties and stability performance of non-covalently functionalized graphene nanoplatelets with Pluronic P-123 in different solvents, Materials Chemistry and Physics. 206, 94-102. doi:10.1016/j.matchemphys.2017.12.008
  54. Shazali S.S., Amiri A., Mohd Zubir M.N., Rozali S., Zabri M.Z., Sabri M.F.M. (2018). Erratum: Facile hydrothermal method for synthesizing nitrogen-doped graphene nanoplatelets using aqueous ammonia: Dispersion, stability in solvents and thermophysical perfomances (Materials Research Express DOI: 10.1088/2053-1591/aab527), Materials Research Express. 5(5). doi:10.1088/2053-1591/aac59f
  55. Shazali S.S., Amiri A., Mohd Zubir M.N., Rozali S., Zabri M.Z., Sabri M.F.M. (2018). Facile hydrothermal method for synthesizing nitrogen-doped graphene nanoplatelets using aqueous ammonia: Dispersion, stability in solvents and thermophysical performances, Materials Research Express. 5(3). doi:10.1088/2053-1591/aab527
  56. Shazali S.S., Amiri A., Zubir M.N.M., Rozali S., Zabri M.Z., Sabri M.F.M. (2018). Colloidal stability measurements of graphene nanoplatelets covalently functionalized with tetrahydrofurfuryl polyethylene glycol in different organic solvents, Current Applied Physics. 18(2), 209-219. doi:10.1016/j.cap.2017.10.007
  57. Shazali S.S., Rozali S., Amiri A., Zubir M.N.M., Sabri M.F.M., Zabri M.Z. (2018). Evaluation on stability and thermophysical performances of covalently functionalized graphene nanoplatelets with xylitol and citric acid, Materials Chemistry and Physics. 212, 363-371. doi:10.1016/j.matchemphys.2018.03.040
  58. Hosseini M., Sadri R., Kazi S.N., Bagheri S., Zubir N., Bee Teng C., Zaharinie T. (2017). Experimental Study on Heat Transfer and Thermo-Physical Properties of Covalently Functionalized Carbon Nanotubes Nanofluids in an Annular Heat Exchanger: A Green and Novel Synthesis, Energy and Fuels. 31(5), 5635-5644. doi:10.1021/acs.energyfuels.6b02928
  59. Jannifar A., Zubir M.N.M., Kazi S.N. (2017). Development of a new driving impact system to be used in experimental modal analysis (EMA) under operational condition, Sensors and Actuators, A: Physical. 263, 398-414. doi:10.1016/j.sna.2017.07.010
  60. Sadri R., Hosseini M., Kazi S.N., Bagheri S., Zubir N., Solangi K.H., Zaharinie T., Badarudin A. (2017). A bio-based, facile approach for the preparation of covalently functionalized carbon nanotubes aqueous suspensions and their potential as heat transfer fluids, Journal of Colloid and Interface Science. 504, 115-123. doi:10.1016/j.jcis.2017.03.051
  61. Sadri R., Zangeneh Kamali K., Hosseini M., Zubir N., Kazi S.N., Ahmadi G., Dahari M., Huang N.M., Golsheikh A.M. (2017). Experimental study on thermo-physical and rheological properties of stable and green reduced graphene oxide nanofluids: Hydrothermal assisted technique, Journal of Dispersion Science and Technology. 38(9), 1302-1310. doi:10.1080/01932691.2016.1234387
  62. Amiri, A., Kazi, S. N., Shanbedi, M., Mohd Zubir, M. N., Yarmand, H., Chew, B. T. (2015). Transformer oil based multi-walled carbon nanotube-hexylamine coolant with optimized electrical, thermal and rheological enhancements, RSC Advances. 5(130107222-107236), Article
  63. Amiri, A., Sadri, R., Shanbedi, M., Ahmadi, G., Kazi, S. N., Chew, B. T., Zubir, M. N. M. (2015). Synthesis of ethylene glycol-treated Graphene Nanoplatelets with one-pot, microwave-assisted functionalization for use as a high performance engine coolant, Energy Conversion and Management. 101, 767-777
  64. Gharehkhani, S., Sadeghinezhad, E., Kazi, S. N., Yarmand, H., Badarudin, A., Safaei, M. R., Zubir, M. N. M. (2015). Basic effects of pulp refining on fiber properties - A review, Carbohydrate Polymers. 115, 785-803
  65. Kazi, S. N., Badarudin, A., Zubir, M. N. M., Ming, H. N., Misran, M., Sadeghinezhad, E., Mehrali, M., Syuhada, N. I. (2015). Investigation on the use of graphene oxide as novel surfactant to stabilize weakly charged graphene nanoplatelets, Nanoscale Research Letters. 10(1 )
  66. Mohd Zubir, M. N., Badarudin, A., Kazi, S. N., Huang, N. M., Misran, M., Sadeghinezhad, E., Mehrali, M., Yusoff, N. (2015). Highly dispersed reduced graphene oxide and its hybrid complexes as effective additives for improving thermophysical property of heat transfer fluid, International Journal of Heat and Mass Transfer. 87, 284-294
  67. Solangi, K. H., Kazi, S. N., Luhur, M. R., Badarudin, A., Amiri, A., Sadri, R., Zubir, M. N. M., Gharehkhani, S., Teng, K. H. (2015). A comprehensive review of thermo-physical properties and convective heat transfer to nanofluids, Energy. 89(1065-108603605442 (ISSN). )
  68. Yarmand, H., Gharehkhani, S., Ahmadi, G., Shirazi, S. F. S., Baradaran, S., Montazer, E., Zubir, M. N. M., Alehashem, M. S., Kazi, S. N., Dahari, M. (2015). Graphene nanoplatelets-silver hybrid nanofluids for enhanced heat transfer, Energy Conversion and Management. 100, 419-428
  69. Zubir, M. N. M., Badarudin, A., Kazi, S. N., Huang, N. M., Misran, M., Sadeghinezhad, E., Mehrali, M., Syuhada, N. I., Gharehkhani, S. (2015). Experimental investigation on the use of reduced graphene oxide and its hybrid complexes in improving closed conduit turbulent forced convective heat transfer, Experimental Thermal and Fluid Science. 66, 290-303
  70. Zubir, M. N. M., Badarudin, A., Kazi, S. N., Misran, M., Amiri, A., Sadri, R., Khalid, S. (2015). Experimental investigation on the use of highly charged nanoparticles to improve the stability of weakly charged colloidal system, Journal of Colloid and Interface Science. 454, 245-255
  71. Mehrali, M., Sadeghinezhad, E., Latibari, S. T., Kazi, S. N., Mehrali, M., Zubir, M. N. B. M., Metselaar, H. S. C. (2014). Investigation of thermal conductivity and rheological properties of nanofluids containing graphene nanoplatelets, Nanoscale Research Letters. 9(1 )
  72. Mehrali, M., Sadeghinezhad, E., Tahan Latibari, S., Mehrali, M., Togun, H., Zubir, M. N. M., Kazi, S. N., Metselaar, H. S. C. (2014). Preparation, characterization, viscosity, and thermal conductivity of nitrogen-doped graphene aqueous nanofluids, Journal of Materials Science. 49(20), 7156-717115734803 (ISSN).
  73. Sadeghinezhad, E., Kazi, S. N., Badarudin, A., Togun, H., Zubir, M. N. M., Oon, C. S., Gharehkhani, S. (2014). Sustainability and environmental impact of ethanol as a biofuel, Reviews in Chemical Engineering. 30(1), 51-72
  74. Sadri, R., Ahmadi, G., Togun, H., Dahari, M., Kazi, S. N., Sadeghinezhad, E., Zubir, N. (2014). An experimental study on thermal conductivity and viscosity of nanofluids containing carbon nanotubes, Nanoscale Research Letters. 9(1 )
  75. Oon, C. S., Togun, H., Kazi, S. N., Badarudin, A., Zubir, M. N. M., Sadeghinezhad, E. (2012). Numerical simulation of heat transfer to separation air flow in an annular pipe, International Communications in Heat and Mass Transfer. 39(8), 1176-118007351933 (ISSN).
  76. Mohd Zubir, M. N., Shirinzadeh, B., Tian, Y. (2009). Development of novel hybrid flexure-based microgrippers for precision micro-object manipulation, Review of Scientific Instruments. 80(6), Article
  77. Zubir, M. N. M., Shirinzadeh, B., Tian, Y. (2009). A new design of piezoelectric driven compliant-based microgripper for micromanipulation, Mechanism and Machine Theory. 44(12), 2248-2264
Others
  1. Muhammad A., Mohammed A. H. A., Turaev S., Ibrahim H. S., Fadhl H., Mohd Z. M. N., Muhammad K. F., Erma R. M. F., Rawad A. (2021). CMC-computer, Materials&Continua.71(2), 2697-2719.
  2. Munawar, K., Mansoor, M. A., McKee, V., Zaharinie, T., Zubir, M. N. M., Aspanut, Z., ... & Mazhar, M. (2020). Optical and photocatalytic properties of biomimetic cauliflowered Ca2Mn3O8 CaO composite thin films. Journal of Solid State Chemistry, 290, 121552.
  3. Munawar, K., Mansoor, M. A., Olmstead, M. M., Zaharinie, T., Zubir, M. N. M., Haniffa, M., ... & Mazhar, M. (2020). Fabrication of Ag ZnO composite thin films for plasmonic enhanced water splitting. Materials Chemistry and Physics, 123220.
  4. Oon, C. S., Kazi, S. N., Zubir, N., Badruddin, I. A., Kamangar, S., Heah, C. Y., ... & Husain, A. (2020). Fouling and fouling mitigation of mineral salt using bio-based functionalized graphene nano-plates. Journal of Thermal Analysis and Calorimetry, 1-11.
  5. Akram, N., Sadri, R., Kazi, S. N., Ahmed, S. M., Zubir, M. N. M., Ridha, M., ... & Tong, G. B. (2019). An experimental investigation on the performance of a flat-plate solar collector using eco-friendly treated graphene nanoplatelets water nanofluids. Journal of Thermal Analysis and Calorimetry, 138(1), 609-621.
  6. An Innovative, High-Efficiency Silver/Silica Nanocomposites for Direct Absorption Concentrating Solar Thermal Power
  7. Naveed Akram, Rad Sadri, S. N. Kazi, Mohd Nashrul Mohd Zubir, Mohd Ridha, Waqar Ahmed, Manzoore Elahi M. Soudagar, Mazdak Arzpeyma, A comprehensive review on nanofluid operated solar flat plate collectors. Journal of Thermal Analysis and Calorimetry, https://doi.org/10.1007/s10973-019-08514-z
  8. AHMED, S. M., KAZI, S. N., Ghulamullah, K. H. A. N., & Mohd, M. N. TOWARD IMPROVED HEAT DISSIPATION OF THE TURBULENT REGIME OVER BACKWARD-FACING STEP FOR THE ALUMINA-WATER NANOFLUIDS AN EXPERIMENTAL APPROACH.
  9. Jannifar, A., Zubir, M. N. M., Kazi, S. N., Zulkifli, N. W. M., & Ahmad, N. (2018). Investigation on the feasibility of eliminating harmonic excitation signal en-route to performing experimental modal analysis (EMA) under operational condition. Journal of Mechanical Science and Technology, 32(7), 3009-3021.
  10. SS Shazali, A Amiri, MNM Zubir, S Rozali, MZ Zabri & MFM Sabri, Facile hydrothermal method for synthesizing nitrogen-doped graphene nanoplatelets using aqueous ammonia: Dispersion, stability in solvents and thermophysical properties, Materials Research Express, doi:10.1088/2053-1591/aab527 (2018)
  11. Shazali, S. S., Amiri, A., Zubir, M. N. M., Rozali, S., Zabri, M. Z., Sabri, M. F. M., & Soleymaniha, M. (2017). Investigation of the thermophysical properties and stability performance of non-covalently functionalized graphene nanoplatelets with Pluronic P-123 in different solvents. Materials Chemistry and Physics.
  12. Ahmad Amiri, Goodarz Ahmadi, Mehdi Shanbedi, Hossein Eshghi, S.N. Kazi, B.T. Chew, Maryam Savari, and Mohd Nashrul Mohd Zubir "Mass production of highly-porous, single-layered graphene for high-performance supercapacitors" Nature Scientific Report, Accepted
  13. Amiri, A., Ahmadi, G., Shanbedi, M., Etemadi, M., Zubir, M. N. M., Chew, B. T., & Kazi, S. N. (2016). Heat transfer enhancement of water-based highly crumpled few-layer graphene nanofluids. RSC Advances, 6(107), 105508-105527.
  14. Mohd Zubir, M.N., et al., Investigation on the Use of Graphene Oxide as Novel Surfactant for Stabilizing Carbon Based Materials. Journal of Dispersion Science and Technology, 2016. 37(10): p. 1395-1407.
  15. Sadri, R., Zangeneh Kamali, K., Hosseini, M., Zubir, N., Kazi, S. N., Ahmadi, G., ... & Moradi, A. (2016). Experimental Study on Thermo-Physical and Rheological Properties of Highly Stable and Green Reduced Graphene Oxide Nanofluids: Hydrothermal Assisted Technique. Journal of Dispersion Science and Technology, (just-accepted).
  16. Sarsam, W.S., et al., Stability and thermophysical properties of water-based nanofluids containing triethanolamine-treated graphene nanoplatelets with different specific surface areas. Colloids and Surfaces A : Physicochemical and Engineering Aspects, 2016. 500 : p. 17-31.
  17. Solangi, K. H., et al. "Experimental investigation of heat transfer performance and frictional loss of functionalized GNP-based water coolant in a closed conduit flow." RSC Advances 6.6 (2016): 4552-4563.
  18. Solangi, K.H., et al., Experimental investigation of the propylene glycol-treated graphene nanoplatelets for the enhancement of closed conduit turbulent convective heat transfer. International Communications in Heat and Mass Transfer, 2016. 73: p. 43-53.
  19. Zubir, M. N. M., Muhamad, M. R., Amiri, A., Badarudin, A., Kazi, S. N., Oon, C. S., ... & Yarmand, H. (2016). Heat transfer performance of closed conduit turbulent flow: Constant mean velocity and temperature do matter!. Journal of the Taiwan Institute of Chemical Engineers, 64, 285-298.
  20. Amiri, Ahmad, et al. "Transformer oil based multi- walled carbon nanotube hexylamine coolant with optimized electrical, thermal and rheological enhancements." RSC Advances 5.130 (2015): 107222- 107236.
  21. Yarmand, Hooman, et al. "Graphene nanoplatelets silver hybrid nanofluids for enhanced heat transfer." Energy Conversion and Management 100 (2015): 419-428.
  22. Zubir, M.N.M., et al., Exploration of the environmentally benign and highly effective approach for improving carbon nanotube homogeneity in aqueous system. Journal of Thermal Analysis and Calorimetry, 2016. 124(2): p. 815-825.
Chapter in Books
  1. Khan, W. A., Shaikh, K., Nawaz, R., Kazi, S. N., & Mohd Zubir, M. N. (2024). Chapter Three - Enhancement of heat transfer with nanofluids and its applications in heat exchangers. In J. P. Abraham, J. M. Gorman, & W. J. Minkowycz (Eds.), Advances in Heat Transfer (Vol. 57, pp. 101-128)
  2. Shaikh, K., Khan, W. A., Kazi, M. S. N., & Zubir, M. N. M. (2024). Chapter one: Nanocellulose: Fundamentals and Applications. In Kazi, M. S. N., & Huang, J. (Eds.), Nanocellulose-Sources, Preparations, and Applications (pp. 1-30). IntechOpen
  3. Kumar, L. H., Kazi, S. N., Masjuki, H. H., & Zubir, M. N. M. (2023). Chapter Six: 2D materials in phase change materials. In Khalid, M., Walvekar, R., Panchal, H., & Vaka, M. (Eds.). Solar Energy Harvesting, Conversion, and Storage: Materials, Technologies, and Applications. Elsevier. (pp. 143-170). Elsevier.
  4. Babalghaith, A.M., Koting, S., Ibrahim, M.R., Mohd, N.S., Rozali, S., Muhamad, M.R., Mohd Zubir, M.N., El-Shafei, A., Khairuddin, F.H., Md Yusoff, N.I. (2021). Lecture Notes in Civil Engineering-Advances in Civil Engineering Materials: Effect of Black PET Fiber as Additive on the Mechanical Properties of Stone Mastic Asphalt (SMA) Mixtures. Singapore: Springer.
  5. Mohd Nashrul Mohd Zubir, Faisal Mahmud, Mohd Hamdi Abdul Shukor, Miss Laiha Mat Kiah, Mohd Yazed Ahmad and Mohd Ridha Muhamad (2020), UM Living Lab Volume IV: Building Resilience & Sustainable Legacy (ISBN: 978-967-18808-1-4)
  6. Zubir, M.N.M. (2019). Development of a remotely operated experimental facility for teaching and learning under UM E-Learning platform. In N.A. Hamzaid & F.A. Ghaffar (Ed.), Eyes on Learning, Hearts on Teaching (pp.165-175). Kuala Lumpur: Academic Enhancement and Leadership Centre (ADeC).
  7. Nurul Akmal Che lah et.al, Engineered Nanomaterial For Catalysis Industry. In Chaudhery Mustansar Hussain (Ed), Handbook of Nanomaterials for Industrial Applications 1st Edition (2018)
Article in Proceeding
WoS
  1. Mawardi, I.; Zubir, M. N. M.; Bakri, J.; Jannifar, A.; Hanif (2019). Development of a hybrid coir fiber composites as ballistic material, INTERNATIONAL CONFERENCE ON SUSTAINABLE ENERGY AND GREEN TECHNOLOGY 2018. 268. doi:10.1088/1755-1315/268/1/012130
  2. Zubir, Mohd Nashrul Mohd; Shirinzadeh, Bijan (2009). Development of a novel flexure based microgripper for precision manipulation of micro-objects, 2009 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL TECHNOLOGY, VOLS 1-3. , 241-+
  3. Zubir, Mohd Nashrul Mohd; Shirinzadeh, Bijan (2009). Modeling and Design of a High Precision Microgripper for Microhandling Operation, 2009 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL TECHNOLOGY, VOLS 1-3. , 414-+
  4. Zubir, Mohd Nashrul Mohd; Shirinzadeh, Bijan; Tian, Yanling (2009). Modeling and analysis of a new flexure-based micropositioner for precision manipulation, 2009 IEEE/ASME INTERNATIONAL CONFERENCE ON ADVANCED INTELLIGENT MECHATRONICS, VOLS 1-3. , 82-+
  5. Zubir, Mohd Nashrul Mohd; Shirinzadeh, Bijan (2008). Development of a Compliant-Based Microgripper for Microassembly, PROCEEDINGS OF 2008 IEEE/ASME INTERNATIONAL CONFERENCE ON MECHATRONIC AND EMBEDDED SYSTEMS AND APPLICATIONS. , 522-+
  6. Zubir, Mohd Nashrul Mohd; Shirinzadeh, Bijan; Tian, Yanling (2008). Towards Fully-automated Micrograsping for Microassembly, 2008 10TH INTERNATIONAL CONFERENCE ON CONTROL AUTOMATION ROBOTICS & VISION: ICARV 2008, VOLS 1-4. , 149-154
Scopus
  1. Sugumaran L., Zubir M.N.M., Newaz K.M.S., Zahari T.Z.T., Aznam S.M., Halil A.M. (2023). Experimental investigation of nucleate pool boiling heat transfer characteristics on modified copper surface via laser-structured microstructures, IOP Conference Series: Earth and Environmental Science. 1281(1). doi:10.1088/1755-1315/1281/1/012062
  2. Babalghaith, A. M., Koting, S., Ibrahim, M. R., Mohd, N. S., Rozali, S., Muhamad, M. R., . . . Yusoff, N. I. M. (2021). Effect of Black PET Fiber as Additive on the Mechanical Properties of Stone Mastic Asphalt (SMA) Mixtures. 139 LNCE, 249-260. doi: 10.1007/978-981-33-6560-5_26
  3. Eid M.M.A.A., Zubir M.N.M., Muhamad M.R.B., Newaz K.M.S. (2021). Computer aided investigation on the effect of internal surface micro grooving for enhanced thermal management of heat exchanger, AIP Conference Proceedings. 2403. doi:10.1063/5.0070873
  4. Alawi O.A., Mallah A.R., Kazi S.N., Zubir M.N.M., Oon C.S. (2020). Thermal Transport Feasibility of (Water + Ethylene Glycol)-Based Nanofluids Containing Metallic Oxides: Mathematical Approach, IOP Conference Series: Materials Science and Engineering. 854(1). doi:10.1088/1757-899X/854/1/012023
  5. Mahmud F., Zubir M.N.M., Ahmad M.Y.B., Abdullah Z.B., Kadri N.A.B., Obaidellah U.H.B., Amin Faisal T. (2020). Development of Web Based Real Time Remote Laboratory for Teaching and Learning, IOP Conference Series: Materials Science and Engineering. 854(1). doi:10.1088/1757-899X/854/1/012025
  6. Mawardi I., Zubir M.N.M., Bakri J., Jannifar A., Hanif (2019). Development of a hybrid coir fiber composites as ballistic material, IOP Conference Series: Earth and Environmental Science. 268(1). doi:10.1088/1755-1315/268/1/012130
  7. Ahmed S.M., Kazi S.N., Khan G., Dahari M., Zubir M.N.M., Ahmad P., Montazer E. (2017). Experimental investigation on momentum and drag reduction of Malaysian crop suspensions in closed conduit flow, IOP Conference Series: Materials Science and Engineering. 210(1). doi:10.1088/1757-899X/210/1/012065
Other Publications
  1. Zubir, M.N.M. (2024, October 17). Inovasi makmal jarak jauh kunci pendidikan STEM. UMresearchplus. https://www.umresearchplus.com/inovasi-makmal-jarak-jauh-kunci-pendidikan-stem/ - Mass Media(newspaper,radio,tv,popular Magazine)
  2. Zubir, M.N.M. (2024, October 17). Mengukuh pendidikan STEM melalui inovasi makmal jarak jauh. Malay.NEWS. https://www.malay.news/mengukuh-pendidikan-stem-melalui-inovasi-makmal-jarak-jauh/ - Mass Media(newspaper,radio,tv,popular Magazine)
  3. Zubir, M.N.M. (2024, October 17). Mengukuh-pendidikan-stem-melalui-makmal-jarak-jauh. berita.rtm.gov.my. https://berita.rtm.gov.my/laporan-khas/kolumnis/senarai-berita-kolumnis/senarai-artikel/mengukuh-pendidikan-stem-melalui-makmal-jarak-jauh - Mass Media(newspaper,radio,tv,popular Magazine)
  4. Zubir, M.N.M. (2024, October 17). kaedahnya-di-sekeliling-kita. apakhabartv.com. https://apakhabartv.com/2024/10/21/kaedahnya-di-sekeliling-kita/ - Mass Media(newspaper,radio,tv,popular Magazine)
  5. Zubir, M.N.M. (2024, October 19). Inovasi-makmal-jarak-jauh-perkukuh-pendidikan-stem. bharian.com.my. https://www.bharian.com.my/rencana/komentar/2024/10/1313070/inovasi-makmal-jarak-jauh-perkukuh-pendidikan-stem - Mass Media(newspaper,radio,tv,popular Magazine)
  6. Zubir, M.N.M. (2024, October 24). Mengukuh-pendidikan-stem-melalui-inovasi-makmal-jarak-jauh. lifenewsagency.com. https://berita.lifenewsagency.com/2024/10/17/mengukuh-pendidikan-stem-melalui-inovasi-makmal-jarak-jauh/ - Mass Media(newspaper,radio,tv,popular Magazine)

RESEARCH INTEREST

  • Passive and active heat transfer enhancement (Heat transfer)
  • Evaporative cooling technology (Evaporative cooling)
  • Radiative cooling technology (Radiative cooling)
  • Fouling mitigation via surface coating technology (Fouling mitigation)
  • Boling and condensation heat transfer enhancement (Boiling and condensation)
  • Mechanism design and Synthesis (Mechanism design and synthesis)
  • Remote laboratory for education (Remote laboratory)
  • Membrane and algae based Carbon Capture and Utilization (CCU) (Carbon Capture and Utilization (CCU))
  • Plasmonic nanoparticles for direct absorption solar collector (DASC) (Plasmonic nanoparticles, direct absorption solar collector (DASC))
  • Palm oil mechanization technology (harvesting, mapping and identification)) (Palm oil mechanization technology)
  • Space technology (Propulsion and aerodynamics) (Space technology (Propulsion and aerodynamics))
  • Photovoltaic cooling technology (Membrane and hybrid cooling) (Photovoltaic cooling technology (Membrane and hybrid cooling))

RESEARCH PROJECT

National
  1. 2024 - 2027, UNIVERSITI MALAYA RESEARCH EXCELLENCE GRANT (UMREG)
    Co-cultivation Of Microalgae For Enhanced Nitrate Removal In An Indoor Marine Recirculation Aquaculture System (i-mras) ( Principal Investigator(PI))
  2. 2016 - 2025, Bantuan Kecil Penyelidikan (BKP)
    Study of the effect of magnetic field on improving heat transfer in closed conduit using magnetic based colloids ( Principal Investigator(PI))
  3. 2022 - 2025, Others MOHE - Top 100 (IIRG)-IISS
    Wp2: Towards Sustainable River Management: Nano Photo-reduction, Biodecompose And Engineered Catalytic Depolymerization Methods On Treatment Of Solid And Liquid River Wastes ( Co-Researcher)
  4. 2023 - 2025, RU Geran - Fakulti Program
    Investigation On Properties And Heat Transfer Performance Of Aqueous Graphene Nanoplatelet / Graphene Oxide Hybrid Nanofluids For Solar Thermal Collectors ( Co-Researcher)
  5. 2023 - 2025, RU Geran - Fakulti Program
    Development Of An Autonomous Vehicle For Road Marks Painting ( Co-Researcher)
  6. 2023 - 2025, RU Geran - Fakulti Program
    Development of a Novel Evaporative-Radiative Cooling Sheet for Sub-Ambient Cooling in Tropical Climate ( Principal Investigator(PI))
  7. 2024 - 2025, UM Living Labs @ UMSDC
    Reducing Energy Consumption of Air Conditioner Via a Synergy of Superhydrophobic Evaporator and Machine Learning-Enabled Performance Monitoring ( Principal Investigator(PI))
  8. 2019 - 2024, Fundamental Research Grant Scheme (FRGS)
    Study Of Mechanism And Mitigation Of Mineral Salts Deposition On Heated Surface By Environmental Friendly Approach ( Co-Researcher)
  9. 2024 - 2024, UM Living Labs @ UMSDC
    Development and Implementation of a Novel Hybrid Evaporative-Radiative Cooling System for PV Modules Installed at UM ( Principal Investigator(PI))
  10. 2019 - 2023, Fundamental Research Grant Scheme (FRGS)
    Passive Radiative Cooling Of Multi-layered Nanostructured Based Emitter-reflector Metamaterial For Enhanced Heat Management ( Co-Researcher)
  11. 2019 - 2022, Fundamental Research Grant Scheme (FRGS)
    Correlations Between Processing Parameters And Graphene Formation From Vegetable Oils Under Simple Step Microwave Assisted Arc In Liquid Method ( Co-Researcher)
  12. 2019 - 2022, Fundamental Research Grant Scheme (FRGS)
    Friction Stir Welding Of Az61 And Mild Steel Reinforced With Gel Dispersed Carbon Nanotubes And 1060 Particles ( Co-Researcher)
  13. 2019 - 2022, Others MOHE - Top 100 (IIRG)-IISS
    Innovative Approach In Converting Mixed Plastic Waste Into Fuel Via Microwave Assisted Spark Pyrolysis Process To Increase Efficency And Yield ( Co-Researcher)
  14. 2019 - 2022, RU Geran - Fakulti Program
    Fouling Mitigation Of Heat Exchangers Surfaces Utilizing Eco-friendly Additives And Conductive Coatings ( Co-Researcher)
  15. 2019 - 2022, RU Geran - Fakulti Program
    Development Of A State-of-the-art Passive Radiative Cooling Sheet Incorporating Hybrid Multi-layer Photonic Metamaterials For Advanced Heat Management Application ( Principal Investigator(PI))
  16. 2019 - 2022, Others MOHE - Top 100 (IIRG)-IISS
    Development Of Heat Exchanger Module Incorporating Chemically And Mechanically Enhanced Surface Texturing For Dew Point Evaporative Cooling With Large Temperature Difference ( Principal Investigator(PI))
  17. 2018 - 2021, RU Geran - Fakulti Program
    Fouling And Fouling Mitigation Of Heat Exchangers By Bio-based Additives And Conductive Polymeric Coatings ( Co-Researcher)
  18. 2019 - 2021, Knowledge Transfer Programme (KTP)-Manage by UMCARES
    Performing Laboratory Exercise Under Remote Condition: A State Of The Art Approach Towards Engaging Student?s Learning Domain Via Interactive Platform Using Internet Based Technology ( Principal Investigator(PI))
  19. 2018 - 2020, RU Geran
    Synthesis Of High Performance Heat Exchange Liquids And Fowling Mitigation On Heat Exchanger Surface By Environmental Friendly Surface Coating ( Co-Researcher)
  20. 2018 - 2020, RU Geran
    Synthesis Of High Performance Heat Exchange Liquids And Fowling Mitigation On Heat Exchanger Surface By Environmental Friendly Surface Coating-2 ( Principal Investigator(PI))
  21. 2016 - 2019, Bantuan Kecil Penyelidikan (BKP)
    Construction of electrochemical enzymatic biosensor for biomedical application. ( Co-Researcher)
  22. 2017 - 2019, Bantuan Kecil Penyelidikan (BKP)
    Modelling of Hydrate Formation in Pipelines ( Co-Researcher)
  23. 2018 - 2019, RU Geran - Fakulti Program
    Synthesis Of Morphologically Tunable Plasmonic Nanocolloids For Enhanced Photo-thermal Energy Conversion Of Solar Radiation Inside Engineered Conduit ( Principal Investigator(PI))
  24. 2018 - 2019, UM Community Campus-Manage by UMCARES
    Decentralization Of Laboratory Exercise Via Remote Application: A State-of-the-art Approach Toward Efficient Educational Facility Resource And Energy Management In Academic Institutions ( Principal Investigator(PI))
  25. 2017 - 2018, RU Geran - ADEC
    Implementation Of Remote Laboratory Facility For E-teaching And Learning In Academic Institution ( Principal Investigator(PI))
  26. 2019 - 2021, Fundamental Research Grant Scheme (FRGS)
    PASSIVE RADIATIVE COOLING OF MULTI-LAYERED NANOSTRUCTURED BASED EMITTER-REFLECTOR METAMATERIAL FOR ENHANCED HEAT MANAGEMENT ( Consultant)
  27. 2019 - 2021, Fundamental Research Grant Scheme (FRGS)
    Friction Stir Welding Of Az61 And Mild Steel Reinforced With Gel Dispersed Carbon Nanotubes And 1060 Particles ( Consultant)
  28. 2019 - 2021, Others MOHE
    Development of Heat Exchanger Module Incorporating Chemically and Mechanically Enhanced Surface Texturing for Dew Point Evaporative Cooling with Large Temperature Difference ( Principal Investigator(PI))
  29. 2019 - 2021, RU Operation
    Development of a State-of-the-art Passive Radiative Cooling Sheet Incorporating Hybrid Multi-layer Photonic Metamaterials for Advanced Heat Management Application ( Principal Investigator(PI))
  30. 2019 - 2021, Others MOHE
    Remote Laboratory: A state-of-the-art web based real time learning platform for transforming student learning domain towards empowering education 4.0 ( Principal Investigator(PI))
  31. 2019 - 2020, Knowledge Transfer Programme (KTP)
    Performing Laboratory Exercise Under Remote Condition: A State Of The Art Approach Towards Engaging Student s Learning Domain Via Interactive Platform Using Internet Based Technology ( Principal Investigator(PI))
  32. 2017 - 2019, Bantuan Kecil Penyelidikan (BKP)
    Modelling of Hydrate Formation in Pipelines ( Consultant)
  33. 2018 - 2019, UM Living Lab Grant Programme
    Decentralization Of Laboratory Exercise Via Remote Application: A State-of-the-art Approach Toward Efficient Educational Facility Resource And Energy Management In Academic Institutions ( Principal Investigator(PI))
  34. 2018 - 2019, RU Operation
    Synthesis Of Morphologically Tunable Plasmonic Nanocolloids For Enhanced Photo-thermal Energy Conversion Of Solar Radiation Inside Engineered Conduit ( Principal Investigator(PI))
  35. 2018 - 2019, RU Operation
    Synthesis of high performance heat exchange liquids and Fowling mitigation on heat exchanger surface by environmental friendly surface coating-2 ( Principal Investigator(PI))
  36. 2017 - 2018, RU Operation
    Implementation of remote laboratory facility for e-teaching and learning in academic institution ( Principal Investigator(PI))
  37. 2016 - 2018, Bantuan Kecil Penyelidikan (BKP)
    construction of electrochemical enzymatic biosensor for biomedical application. ( Consultant)
  38. 2016 - 2017, Bantuan Kecil Penyelidikan (BKP)
    Study of the effect of magnetic field on improving heat transfer in closed conduit using magnetic based colloids ( Principal Investigator(PI))
Private
  1. 2024 - 2025, Private Funding
    Investigation Of The Optical And Thermophysical Performance Of Enhanced Polymer Coating On Substrates ( Principal Investigator(PI))
International
  1. 2017 - 2019, International Funding
    Study of heat transfer on engineered pipe surface ( Principal Investigator(PI))
  2. 2018 - 2019, Private Funding
    Investigation on the feasibility of adopting J-Alert system to Malaysia s integrated flood warning and management system ( Principal Investigator(PI))
  3. 2017 - 2018, International Funding
    microwave based multiphase flow measurement technique ( Principal Investigator(PI))

CONSULTANCY PROJECT

  • Provision of Enterprise Decarbonisation Passive Radiative Cooling Technology (parctech) Field Test Study for Different Cooling Paints, Films and Base Materials, PETRONAS TECHNICAL SERVICES SDN BHD
    05 Mar 2024 - 04 May 2024 (National)
  • Working Group Committee Member for Water Meter, SIRIM
    01 Dec 2017 - 01 Dec 2019 (National)
  • Working Group Committee Member for Eco-labeling of Imaging Equipment, SIRIM
    01 Dec 2018 - 01 Dec 2019 (National)
  • Accreditation Panel for Postgraduate Program, University of Malaya
    01 Dec 2018 - 01 Dec 2018 (National)
  • Technical Committee On Potable Water Systems and Components, SIRIM
    01 Dec 2017 - 01 Dec 2018 (National)
  • Expert Adviser for Project Entitled "refurbishment of Nanofluid Convective Heat Transfer Experimental Set-up", Garuda Mekar (M) Sdn Bhd
    01 Dec 2016 - 01 Dec 2016 (National)

PAPER PRESENTED

ORAL PRESENTER
  1. Development of Enhance Evaporative Cooling System with Independent Dehumidification, 2022 Academic Conference on Sustainable Energy and Green Technology (AUA-SEGT 2022 Conference), Universiti Malaya (Malaysia) and Chulalongkorn University (Thailand) (International) (21 Feb 2022 - 23 Feb 2022)
  2. Development of Dew Point Evaporative Cooling Heat Exchanger Incorporating Chemically and Mechanically Enhanced Surface Texturing, 2022 AUA Academic Conference on Sustainable Energy and Green Technology (AUA-SEGT 2022), Universiti Malaya (Malaysia) and Chulalongkorn University (Thailand) (International) (21 Feb 2022 - 23 Feb 2022)
  3. DEVELOPMENT OF REMOTE LABORATORY SYSTEM WITH MULTI-DEGREE VIEWING ACCESS IN SUPPORT FOR DISTANCE LEARNING INITIATIVE, 7th International Conference on Mechanical, Manufacturing and Plant Engineering, Universiti Teknologi Petronas  (International) (29 Nov 2021 - 29 Nov 2021)
  4. DEVELOPMENT OF WEB BASED REMOTE LABORATORY SYSTEM FOR PERFORMING REAL TIME EXPERIMENT AND BEYOND, International Conference on E-Learning (ICOEL 2021) 15 16 June 2021, Universiti Sains Malaysia  (International) (15 Jun 2021 - 16 Jun 2021)
  5. Performing Laboratory Exercise Under Remote Condition: A State of the Art Approach Towards Engaging Student s Learning Domain Via Interactive Platform Using Internet Based Technology, University for Society International Conference , Universiti Kebangsaan Malaysia  (International) (18 Nov 2020 - 18 Nov 2020)
  6. Design a High Efficiency Plasmonic Nanofluid for Concentrating Direct Absorption Solar Power, International conference on sustainable energy and green technology (ISEGT 2018) on 11-14 December 2018, Kuala Lumpur, Malaysia, Centre of inter integration  (International) (11 Dec 2018 - 14 Dec 2018)
  7. Development of a remotely operated experimental facility for teaching and learning under UM E-Learning platform, LEARNING IMPROVEMENT AND TEACHING ENHANCEMENT RESEARCH (LiTeR) Conference 2018, ADEC (National) (04 Apr 2018 - 05 Apr 2018)
PRESENTER
  1. DEVELOPMENT OF WEB BASED REAL TIME REMOTE LABORATORY FOR TEACHING AND LEARNING, The 2nd International Conference on Science and Innovated Engineering (I-cosine 2019), Lhokseumawe State of Polytechnique, Jalan Banda Aceh Medan (International) (09 Nov 2019 - 10 Nov 2019)
  2. Numerical study of nanofluid heat transfer performance in closed conduit turbulent flow , 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), IIUM (International) (02 Jul 2013 - 04 Jul 2013)
  3. Numerical Study of the Effect of Coal Diameter on Pulverized Coal Combustion to Reduce Pollutants, 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), IIUM (International) (02 Jul 2013 - 04 Jul 2013)
  4. Development of a technique based on electrostatic stabilization for improving nanofluid suspension stability at low charge potential , 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), International Islamic University Malaysia (IIUM) (International) (02 Jul 2013 - 04 Jul 2013)
  5. A computational simulation of heat transfer to separation air flow in a concentric pipe, International Conference on Applications and Design in Mechanical Engineering 2012 (ICADME 2012), Penang, Malaysia, UNIVERSITI MALAYSIA PERLIS (International) (27 Feb 2012 - 28 Feb 2012)
  6. Modeling and analysis of a new flexure-based micropositioner for precxision manipulation, 2009 IEEE/ASME International Conference on Advanced Intelligence Mechatronics (AIM 2009), Singapore, IEEE (International) (14 Jul 2009 - 17 Jul 2009)
  7. Development of a novel flexure based microgripper for precision manipulation of micro-objects, 2009 IEEE-ICIT International Conference on Industrial Technology (ICIT 2009), Churchill,Victoria, Australia,, IEEE (International) (10 Feb 2009 - 13 Feb 2009)
  8. Modeling and design of a high precision microgripper for microhandling operation, 2009 IEEE-ICIT International Conference on Industrial Technology (ICIT 2009), Churchill,Victoria, Australia,, IEEE (International) (10 Feb 2009 - 13 Feb 2009)
  9. Towards fully-automated micrograsping for microassembly, 2008 10th International Conference on Control, Automation, Robotics and Vision (ICARCV 2008), Hanoi, Vietnam, IEEE (International) (17 Dec 2008 - 20 Dec 2008)
  10. Development of a compliant-based microgripper for microassembly, IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA), Beijing, China, , IEEE (International) (12 Oct 2008 - 15 Oct 2008)

ACADEMIC/ PROF. SERVICES

Evaluation
  1. (2025) Reviewer, International, (Reviewer)
  2. (2025) Reviewer, International, (Reviewer)
  3. (2025) Reviewer, International, (Reviewer)
  4. (2025) Reviewer, International, (Reviewer)
  5. (2024) Reviewer, International, (Reviewer)
  6. (2024) External Panel Assessor for The Maintenance of Accreditation for The Programme Master of Science in Engineering Via Research Mode from Kulliyyah of Engineering IIUM, National, (External Assessor)
  7. (2024) Internal Examiner & Submission of Thesis for Examination for Doctor of Philosophy, University, (Internal Examiner)
  8. (2024) Doctor Philosophy Thesis for Examination, University, (Internal Examiner)
  9. (2024) Candidature Defence Chairman and Panel Report for Doctoral Candidate, University, (Internal Examiner)
  10. (2024) Candidature Defence Chairman and Panel Report for Doctoral Candidate, University, (Internal Examiner)
  11. (2024) Candidature Defence Chairman and Panel Report for Doctoral Candidate, University, (Internal Examiner)
  12. (2024) Reviewer, International, (Reviewer)
  13. (2024) Reviewer, International, (Reviewer)
  14. (2024) Erformance of Bin Weather Data and Its Climate Change Impacts On Air Conditioning Systems in The Tropics, University, (Internal Examiner)
  15. (2024) Internal Examiner for Wong Chun Mun (17019993/2 | Khal60026), University, (Internal Examiner)
  16. (2024) Internal Examiner for Ehsan Hamidi 17035768/1 |kha150028, University, (Internal Examiner)
  17. (2023) Investigation of Small-scale Aerospike Nozzles for Cold Thrust Applications, International, (External Examiner)
  18. (2023) Simulation of Flow and Forced Convective Heat Transfer On 3-d Micro X-ray Tomography of Metal Foam Heat Sink Using Lattice Boltzmann Method, University, (Internal Examiner)
  19. (2023) Simulation and Verification of Noise Hazard in Small and Medium Enterprise Manufacturing Industries With Remedies, University, (Internal Examiner)
  20. (2022) Reviewer, International, (Reviewer)
  21. (2022) Reviewer of 13 Papers Submitted for Materials Today: Proceeding, International, (Reviewer)
  22. (2021) Internal Examiner for Phd Candidate, University, (Internal Examiner)
  23. (2021) Candidature Defense Examiner for Nurul Zariah Binti Jakaria @ Zakaria, University, (Internal Examiner)
  24. (2021) Phd Candidate Defense Internal Examiner for Ms Yit Jing Ee, University, (Internal Examiner)
  25. (2021) Internal Examiner for Ms Long Su Xian, University, (Internal Examiner)
  26. (2021) Candidature Defense Internal Examiner for Mr Wong Chun Mun, University, (Internal Examiner)
  27. (2021) Internal Examiner for Muhammad Syahir Amzar Bin Zulkifli, University, (Internal Examiner)
  28. (2020) Internal Examiner for Mr Muhammad Jamshaid, University, (Internal Examiner)
  29. (2019) Reviewer, International, (Reviewer)
  30. (2018) Reviewer panel of ISI journal articles (Thermal Science and Engineering Progress). Title: Functionalized Multi-Walled Carbon Nanotubes based Newtonian Nano fluids for Medium Temperature Heat transfer Applications , (Reviewer)
  31. (2018) Reviewer panel of ISI journal articles (Thermal Science and Engineering Progress). Paper title: A Comprehensive Review on Synthesis, Stability, Thermophysical Properties and Characterization of Nanofluids , (Reviewer)
  32. (2017) Review of Journal Manuscript (tailoring The Chemical and Structural Properties of Graphene Oxide Nanoplatelets Synthesized At Room Temperature With Different Processing Time), National, (Reviewer)
  33. (2009) I have been invited in several occasions between 2009 and continuing until present to review manuscript submitted for journal publication. My role is to critically evaluate the manuscript and provide a professional judgement on the quality to it the journal publication requirement. The journal s are: 1. International Journal of Heat and Mass Transfer 2. Sensors and Actuators A: Physical 3. Thermal Science and Engineering Progress 4. Mechanism and Machine Theory , (Reviewer)
Contribution to external organisation
  1. (2024) Conference Committee, International, (Technical Advisor)
  2. (2024) Bawahjawatankuasa Teknikal Berkenaan Potable Water System Andcomponents (nsc 06/tc 21), National, (Technical Advisor)
  3. (2018) Working Committee Member for Water Meter Iso Standard, National, (Technical Advisor)
  4. (2016) Evaluation panel for Tibology Poster Competition , University of Malaya
Contribution to event
  1. (2022) Organizing Committee, International, (Event Organiser)

SUPERVISION

Postgraduate Student
PhD/ Doctoral
  1. (2024) Research and Implementation of Workshop Virtual Reality System Based on Unity 3D, LIAO GUANFU
  2. (2024) THERMAL PERFORMANCE OF A FLAT-PLATE SOLAR COLLECTOR USING AQUEOUS COLLOIDAL DISPERSIONS OF LIGNOCELLULOSIC CARBON-STRUCTURED NANOMATERIALS, MOHD HARITH ISKANDAR BIN ABDUL HALIM
  3. (2024) Design and Optimization of Thermal Management System for Lithium-ion Power Battery Based on Shunt Heat Exchange Structure and Thermoelectric Device, ZHANG HAN WEN
  4. (2024) Synthesis of Nanofluids and Alteration of Annular Flow Pipes of Heat Exchangers for the Enhancement of its Performance, SAMR UL HASNAIN
  5. (2024) Glass Fiber Reinforced Polymer Coating for the Corrosion Mitigation and Mechanical Reinforcement of Carbon Steel in Biodiesel Storage, NUR NAQIUDDIN BIN MDD NORDIN
  6. (2024) DEVELOPMENT OF AIR COOLING SYSTEM FOR LI-ION BATTERY THERMAL MANAGEMENT DURING CHARGING AND DISCHARGING, SHEN JIWEN
  7. (2024) Mitigation of Calcium Carbonate Fouling on Heat Exchanger Surfaces with Nanoadditives and Coatings, KALEEMULLAH SHAIKH
  8. (2024) Synthesis of Nano porous Carbon Doped Polymer Composites, Characteristics for Heat Transfer and Its’ Application for Cooling Water Purification of Heat Exchangers, KHAN WAJAHAT AHMED
  9. (2024) Development of a Dew Point Evaporative Cooling Heat Exchanger Module Incorporating Chemically and Mechanically Improved Surfaces for Enhanced Cooling Performance, MD SHADAB ALAM
  10. (2024) Enhancement of Water Vapor Permeance in Vacuum Membrane Dehumidification via Flow Configuration and Potassium Formate Based Surface Activation, SHEKH ABDULLAH
  11. (2024) IMPROVEMENT IN THERMAL-HYDRAULIC DESIGN FOR HEAT TRANSFER ENHANCEMENT IN ADVANCED POWER GENERATION SYSTEMS, AMMAR AHMED
  12. (2024) RESEARCH ON TOY DESIGN METHOD BASED ON SUSTAINABLE DESIGN THEORY, NING JIADONG
  13. (2024) ADVANCEMENTS IN TURBULENCE CONTROL FOR ENHANCED EFFICIENCY OF TURBINE MECHANICAL SYSTEMS IN FLUID MECHANICAL ENGINEERING, LI ZHENWEI
  14. (2024) IMPROVEMENT IN THERMAL HYDRAULICS DESIGN OF ADVANCED POWER GENERATION SYSTEMS, RAB NAWAZ
  15. (2024) Thermal Performance Evaluation of Eco-Friendly Functionalized Nanofluids in Circular and Annular Flow Passages, OMAR FAYEZ ALMATAR ABD RABBUH
  16. (2024) Heat transfer and fouling, ADRIAN CHUNG NING HANN
  17. (2024) MINERAL FOULING ON HEAT EXCHANGER AND ITS MITIGATION BY ECO-FRIENDLY ADDITIVES, BHINITHA A/P CHANDRASAGARAN
  18. (2024) ENHANCEMENT OF POOL BOILING HEAT TRANSFER CHARACTERISTICS USING LASER-TEXTURED COPPER-GROOVED SURFACES, LUVINDRAN A/L SUGUMARAN
  19. (2024) study of drag reduction by using polymer composites, SIEW BOON KEAT
  20. (2024) Study of Drag Reduction by using polymers, CHIN CHONG HO
  21. (2023) THE THEORETICAL AND EXPERIMENTAL STUDY TO IMPROVE TUNGSTEN INERT GAS (TIG) WELDING MACHINE PERFORMANCE BY USING NANO FLUID, IKHLAS MOHSIN HASAN
  22. (2023) Marangoni Convection and Heat Transfer of Wavy Trapezoidal and C-Shaped Enclosures Filled with Nanofluid, SHARIFAH NURIZA BINTI SYED MUHAMMAD NAQUIB AL'AIDRUS
  23. (2022) An innovative high efficiency core shell nanocomposites for direct absorption concentrating solar thermal power, GHASAQ ADHEED HASHI (Universiti Teknologi Malaysia (utm))
  24. (2021) THERMAL AND ECONOMIC ANALYSIS OF A LIQUID FLAT-PLATE SOLAR COLLECTOR SYSTEM USING GREEN CARBON NANOFLUIDS, HARISH KUMAR LOGANATHAN
  25. (2020) MULTILAYER NANOSTRUCTURED METAMATERIAL FOR ENERGY FREE RADIATIVE COOLING, DESRINO BIN JALANI
  26. (2020) MINERAL FOULING ON HEAT EXCHANGER AND ITS MITIGATION BY ECO-FRIENDLY ADDITIVES, BHINITHA A/P CHANDRASAGARAN
  27. (2020) DEVELOPMENT OF ANALYTICAL AND COMPUTATIONAL MODELLING OF HEAT TRANSFER AND HYDRODYNAMIC CHARACTERISTICS ON PATTERNED AND COATED SURFACES SUBJECTED TO CONVECTIVE EVAPORATION PROCESS, SHARIFAH NURIZA BINTI SYED MUHAMMAD NAQUIB AL'AIDRUS
  28. (2020) EXPLOITATION OF PLASMON RESONANCE PHENOMENON FOR THE IMPROVEMENT OF DIRECT ABSORPTION SOLAR COLLECTOR PERFORMANCE, ABDUL RAHMAN MALLAH
  29. (2020) THERMAL PERFORMANCE ANALYSIS OF FLAT-PLATE SOLAR COLLECTOR BY USING CARBON AND METAL BASED NANOFLUIDS, NAVEED AKRAM
  30. (2019) THERMAL INVESTIGATION OF SOLAR DISH TYPE CONCENTRATOR SYSTEM WITH STORAGE TANK BASED ON NANO ENHANCED METALLIC PCMS FOR HIGH TEMPERATURE SOLAR ENERGY STORAGE AND DISTILLATION OF WATER, HARISH KUMAR LOGANATHAN
  31. (2019) Study of the Thermal Performance of a Flat-Plate Solar Collector Using Carbon and Metal Based Nanofluids, NAVEED AKRAM
  32. (2019) PERFORMANCE INVESTIGATION OF SOLAR ASSISTED SOLID DESICCANT SYSTEMS INTEGRATED WITH AN EFFICIENT EVAPORATIVE TECHNIQUE, NAVEED AKRAM
  33. (2019) MINERAL FOULING ON HEAT EXCHANGER AND ITS MITIGATION BY ECO-FRIENDLY ADDITIVES, BHINITHA A/P CHANDRASAGARAN
  34. (2019) EXPLOITATION OF PLASMON RESONANCE PHENOMENON FOR THE IMPROVEMENT OF VOLUMETRIC SOLAR COLLECTOR PERFORMANCE, ABDUL RAHMAN MALLAH
  35. (2019) DEVELOPMENT OF ANALYTICAL AND COMPUTATIONAL MODELLING OF HEAT TRANSFER AND HYDRODYNAMIC CHARACTERISTICS ON PATTERNED AND COATED SURFACES SUBJECTED TO CONVECTIVE EVAPORATION PROCESS, SHARIFAH NURIZA BINTI SYED MUHAMMAD NAQUIB AL'AIDRUS
  36. (2018) GREEN APPROACH TO FUNCTIONALIZE HIGHLY STABLE GRAPHENE NANOPLATELETS COLLOID FOR HEAT BASED APPLICATIONS, SITI SHAFIAH BINTI SHAZALI
  37. (2017) Heat transfer in surface engineered pipes, Naveed Akram
  38. (2015) PLASMONIC NANOFLUIDS FOR PHOTO-THERMAL CONVERSION IN DIRECT ABSORPTION SOLAR COLLECTOR, Abdul Rahman Mallah
  39. (2014) DEVELOPMENT OF ELECTROSPUN BIOPOLYMER FOR THERMOELECTRIC APPLICATION, Siti Shafiah binti Shazali
Master
  1. (2024) Synthesis and Application of Green Functionalized Carbon Nanostructures as Additive in Heat Transfer Liquid for Improving Heat Exchanger Performance, GHOLAMALI SHAMSKHOOZANI
  2. (2023) APPLICATION OF HYBRID COMBINATION OFGRAPHENE AND METAL OXIDES AS COASTING ON HEAT EXCHANGER SURFACE FOR ENHANCING HEAT TRANSFER AND FOULING MITIGATION, MUHAMMAD HANIF BIN KAMAR
  3. (2023) Improvement of Heat Transfer in Tube Heat Exchanger via Passive Flow Generator, FARAH ARINA BINTI IBRAHIM
  4. (2022) APPLICATION OF HYBRID GRAPHENE-METAL OXIDE COATING ON HEAT EXCHANGER SURFACE FOR ENHANCING HEAT TRANSFER AND FOULING MITIGATION, NOOR SHAKIRA BINTI MOHD NAJIB
  5. (2022) DEVELOPMENT OF MULTI DEGREE OF FREEDOM CAR AIR CONDITIONING LOUVER MECHANISM FOR EFFICIENT COOLING OF CAR INTERIOR COMPARTMENT, Fen Deng
  6. (2022) Computer Aided Numerical Investigation on the Effects of Internal Surface Micro Grooving for Enhancing Thermal Performance of Heat Exchanger, MOHAMED MOUSTAFA ABDELHALIM AHMED EID
  7. (2022) COMPUTATIONAL STUDY ON MULTI DEGREE OF FREEDOM CAR AIR CONDITIONING LOUVER FOR EFFICIENT THERMAL AND FLOW DESTRIBUTION OF CAR INTERIOR COMPARTMENT, YIN, WEIHAO
  8. (2022) EXERGY ANALYSIS OF THE DESIGN OF CENTRALIZED CHILLER PLANT WITH THERMAL ENERGY STORAGE SYSTEM IN COMMERCIAL BUILDINGS, WONG FOOK KEE
  9. (2021) IMPROVING THERMAL HEAT DISSIPATION FROM SOLAT PANEL VIA HIGH PERFORMANCE COLLOIDAL LIQUID, NURALMEERA BALQIS BINTI MOHD AZLAN
  10. (2021) EXPERIMENTAL INVESTIGATION ON THE EFFECT OF MICROGROOVING AND COIL INSERT IN CONCENTRIC TUBE ON FORCED CONVECTIVE HEAT TRANSFER ENHANCEMENT, Ahmad Aizat Bin Mahadi
  11. (2021) APPLICATION OF METAL OXIDE THIN FILM ON STRUCTURED HEAT EXCHANGER SURFACE FOR ENHANCING HEAT TRANSFER AND FOULING MITIGATION, Syamimi Aisyah Binti Mohammad Yusoff
  12. (2021) DEVELOPMENT OF A NOVEL PIPE INTERNAL GROOVING TECHNIQUE USING CLOSED-MAGNETIC FIELD PRINCIPLE, MD MEHEDY HASAN RONY
  13. (2021) LAYERED SYSTEM ARCHITECTURE OF REMOTE ROBOTIC LABORATORY FOR REAL-TIME DISTANT LEARNING, FAISAL MAHMUD
  14. (2020) STUDY OF SYNTHESIS AND APPLICATION OF VARIOUS TYPES OF NANOFLUIDS, SAAD ALI USMANI
  15. (2020) MATHEMATICAL MODELLING OF IMPACT ON HEAT TRANSFER DUE TO CHANGES OF FIN STRUCTURED INTERNAL TUBE SURFACE IN ANNULAR PIPE HEAT EXCHANGER, FARAH ARINA BINTI IBRAHIM
  16. (2020) INTERNAL GROOVED PIPE MANUFACTURED USING MAGNETIC TOOL FOR CONVECTIVE HEAT TRANSFER IMPROVEMENT, RONY MD MEHEDY HASAN
  17. (2020) A state-of-the-art web-based real-time learning platform with adaptive feedback for non-virtual distant learning in Science and Technology experiments, FAISAL MAHMUD
  18. (2019) MATHEMATICAL MODELLING OF IMPACT ON HEAT TRANSFER DUE TO CHANGES OF FIN STRUCTURED INTERNAL TUBE SURFACE IN ANNULAR PIPE HEAT EXCHANGER, FARAH ARINA BINTI IBRAHIM
  19. (2019) Magnetic Abrasive Finishing for Flat Surface, RONY MD MEHEDY HASAN
  20. (2017) characterization of photocurrent conversion efficiency of solar cell using perovskite structure, Khadijah Binti Hamzah (Universiti Teknologi MARA (UiTM))
  21. (2016) HEAT TRANSFER AND FRICTIONAL PRESSURE DROP OF CROP FIBER SUSPENSIONS IN CLOSED CONDUIT FLOW AND NANOFLUID FLOW IN BACKWARD-FACING STEP, SYED MUZAMIL AHMED
  22. (2015) FLUID FLOW AND HEAT TRANSFER IN PACKED BED REACTOR, Syed Muzamil Ahmed
Under Graduate Students
  1. (2021) AUTOMATIC VISUAL INSPECTION OF ROTATIONALLY SYMMETRIC PRODUCTS USING AI AND IMAGE PROCESSING

TEACHING

Master
  1. (2023) KQK7004 - Energy Conversion and Storage
  2. (2023) KQK7008 - Hvac and Building Energy Management
  3. (2022) KQE7008 - Hvac and Building Energy Management
  4. (2022) KQK7008 - Hvac and Building Energy Management
  5. (2020) KQE7004 - Energy Conversion and Storage
  6. (2020) KQE7008 - Hvac and Building Energy Management
  7. (2020) KQE7008 - Hvac and Building Energy Management
Bachelor
  1. (2024) KIG1013 - Engineering Thermodynamics 1
  2. (2023) KIG2013 - Computer Programming
  3. (2023) KIG1013 - Engineering Thermodynamics 1
  4. (2022) KIG3002 - Thermal Engineering Systems
  5. (2021) KIG2007 - Computer Programming
  6. (2021) KIG2003 - Fluid Mechanics Ii
  7. (2018) KIG2007 - Computer Programming
  8. (2018) KMEM4319 - Advanced Heat and Mass Transfer
  9. (2017) GIG1005 - Social Engagement
  10. (2016) GIG1005 - Social Engagement
  11. (2016) KMEM2111 - Advanced Engineering Mathermatics
  12. (2016) KMEM2111 - Applied Engineering Mathematics
  13. (2016) KMEM2117 - Computer Programming
  14. (2016) KMEM3116 - Instrumentation and Measurement Technique

PATENT/ IPR

  • A Bio-Based Method for Synthesizing an Additive for Use in Heat Transfer Fluid
    PATENT
  • A Multiphase Flow Metering System For Measuring Constituents In A Fluid Mixture
    PATENT
  • PLASMONIC NANOFLUID COMPRISING METAL OR METAL-LIKE NANOPARTICLE FOR HIGH PHOTOTHERMAL CONVERSION OF SOLAR ENERGY
    PATENT
  • A BIO-BASED METHOD FOR SYNTHESIZING AN ADDITIVE FOR USE IN HEAT TRANSFER FLUID
    Patent (National)

SOCIAL RESPONSIBILITY ACTIVITIES

  • Committee Member for Engineering Open Day 2022, (11 Sep 2022 - 11 Sep 2022) (University)
  • Technical Committee, International Conference On Sustainable Energy and Green Technology 2018 (isegt 2018), (11 Dec 2018 - 14 Dec 2018)
  • Perlantikan Sebagai Pencatat Bagi Program Advokasi Ilmuan Majlis Profesor Negara, (27 Oct 2016 - 27 Oct 2016)

COURSE ATTENDED

Internal/ External Course
  1. PROGRAM TEAMBUILDING 2016, FAKULTI KEJURUTERAAN, KEM BINA NEGARA, ULU SEPRI, REMBAU (18 Feb 2016 - 20 Feb 2016)
  2. TAKLIMAT EMERALD NEW PROGRAM, THE CUBE, BLOK L, FAKULTI KEJURUTERAAN UM (28 Jun 2016 - 28 Jun 2016)
  3. ON BOARDING PROGRAMME: MAXIMIZING SUCCES, BILIK PERSIDANGAN ARAS 4 (SESI PAGI) & THE CUBE, ARAS 2 (SESI PETANG) (02 Mar 2016 - 02 Mar 2016)
  4. SUPERVISION BASIC COURSE FOR NEW LECTURERS 2/2016, SEMINAR ROOM 1 & 2, AKADEMI PENGAJIAN ISLAM (22 Nov 2016 - 23 Nov 2016)
  5. WORKSHOP OF INTERNAL ASSESSORS FOR ACADEMIC PROGRAMMES UNIVERSITY OF MALAYA, UNIVERSITI MALAYA (24 Oct 2016 - 25 Oct 2016)
  6. WORKSHOP: SPECTRUM (BASIC) ORGANIZED BY ADEC UM, MAKMAL KOMPUTER, BLOK Y FAKULTI KEJURUTERAAN (15 Feb 2017 - 15 Feb 2017)
  7. KURSUS ASAS BAGI HARTA INTELEK & KEUSAHAWANAN (18 & 19 JANUARI 2017), KOMPLEKS PENGURUSAN PENYELIDIKAN & INOVASI, UNIVERSITI MALAYA (18 Jan 2017 - 19 Jan 2017)
  8. UNIVERSITY OF MALAYA EDUCATOR 4.0 PROGRAMME, ISLAMIC ACADEMY UM (05 Sep 2018 - 06 Sep 2018)
  9. BENGKEL SPECTRUM, MAKAMAL KOMPUTER , ARAS 3, BLOK Y, FAKJ (15 Feb 2017 - 15 Feb 2017)
  10. BENGKEL PENYEMPURNAAN DOKUMEN JABATAN KEJURUTERAAN MEKANIK, FAKULTI KEJURUTERAAN, HOTEL ARMADA, PETALING JAYA (08 Aug 2019 - 08 Aug 2019)
  11. UM EDUCATOR 4.0, UNIVERSITI MALAYA KUALA LUMPUR (05 Sep 2018 - 06 Sep 2018)
  12. PROGRAM TRANSFORMASI MINDA, ARAS 4, BILIK SENAT BANGUNAN CANSELERI (03 Sep 2019 - 06 Sep 2019)
  13. EMERALD FOR BASIC TEACHING AND LEARNING, UNIVERSITI MALAYA (04 Nov 2019 - 08 Nov 2019)
  14. THE 2ND INTERNATIONAL CONFERENCE ON SCIENCE AND INNOVATED ENGINEERING, MALACCA, MALAYSIA (09 Nov 2019 - 10 Nov 2019)
  15. INTERNATIONAL CONFERENCE ON THERMOFLUID XI 2020, DEPARTMENT OF MECHANICAL AND INDUSTRIAL ENGINEERING, FACULTY OF ENGINEERING, UNIVERSITAS GADJAH MADA (10 Nov 2020 - 11 Nov 2020)
  16. 7TH INTERNATIONAL CONFERENCE ON MECHANICAL, MANUFACTURING AND PLANT ENGINEERING, VIRTUAL (29 Nov 2021 - 29 Nov 2021)