Curriculum Vitae

DR. MUHAMMAD KHAIRI FAIZ BIN AHMAD HAIRUDDIN

Senior Lecturer
  • Department of Mechanical Engineering
    Faculty of Engineering

AREAS OF EXPERTISE

  • METAL
    low-cycle fatigue
  • ELECTRONIC MATERIALS
    soldering
  • ALLOY MATERIALS
    Sn alloy, aluminum alloy
  • CASTING
    solidification technology
  • NANO-MATERIALS
    nanomaterials metal sintering
  • ELECTRONIC PACKAGING MATERIALS
    Power Electronics Packaging

ACADEMIC QUALIFICATION

  • PhD (Modern Mechanical Engineering), (Modern Mechanical Engineering)
    Waseda University
  • MEng (Modern Mechanical Engineering), (Modern Mechanical Engineering)
    Waseda University
  • BEng (Modern Mechanical Engineering), (Modern Mechanical Engineering)
    Waseda University

ADMINISTRATIVE DUTIES

  • Marketing Manager
    03 Jan 2023 - 31 Dec 2024 (University Malaya)
  • Committee Members
    23 Dec 2022 - 31 Dec 2023 (Department)
  • Ahli taskforce: Kajian governan dan perkhidmatan bahagian pemasan dan pemgambilan (MRD)
    01 Sep 2023 - 31 Dec 2023 (University Malaya)
  • Coordinator
    14 Oct 2022 - 31 Dec 2023 (Department)
  • Jawatankuasa Pemindahan Kredit 2023/2024
    07 Dec 2023 - 07 Dec 2023 (Department)
  • Faculty of Engineering Open Day
    16 Sep 2023 - 17 Sep 2023 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Members
    01 Jan 2022 - 31 Dec 2022 (Department)
  • Task Force Member
    13 Jun 2022 - 13 Jun 2022 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Members
    01 Apr 2021 - 28 Dec 2021 (Department)
  • Committee Members
    01 Jan 2021 - 28 Dec 2021 (Department)
  • Research Assets Internal Auditor
    26 Apr 2021 - 30 Apr 2021 (Department of Mechanical Engineering, Faculty of Engineering)

MEMBERSHIPS

  • COMMITTEE MEMBER OF MATERIALS LECTURE COMMITTEE, MEMBER
    2022 to 2024 (National)
  • GRADUATE ENGINEER, MEMBER
    Since 2020 (National)
  • MEMBER OF THE JAPAN INSTITUTE OF ELECTRONICS PACKAGING, MEMBER
    Since 2015 (International)

AWARD AND STEWARDSHIP

  • Outstanding Paper Award
    Japan Foundry Engineering Society, 2023 (International)
  • EXCELLENCE SERVICE AWARD
    University of Malaya, 2023 (University)
  • 3rd Place for Breaking The Wall of Power Module Packaging
    Falling Walls Foundation, 2021 (National)

PUBLICATIONS

Article in Journal
WoS
  1. Krisdiyanto; Ghazilla, Raja Ariffin Bin Raja; Azuddin, M.; Hairuddin, Muhammad Khairi Faiz Bin Ahmad; Risdiana, Nurvita (2023). An analysis of the effect of syringe barrel volume on performance and user perception, MEDICINE. 102(23). doi:10.1097/MD.0000000000033983
  2. Nagata, Yoshihiro; Kato, Kiyotaka; Shishido, Takuma; Tsuchiya, Ao; Kitaoka, Sanji; Oshiro, Naoto; Nishi, Naomi; Nonaka, Naoki; Koike, Takayuki; Oike, Toshimitsu; Hayashi, Kenji; Kambe, Hiroshi; Okane, Toshimitsu; Muhammad, Khairi Faiz; Yoshida, Makoto (2023). Development of High-Ductility and Low-Hot-Tearing-Susceptibility Non-heat Treatment Al-Mg-Mn-Based Die Casting Alloy for Automotive Structural Parts, INTERNATIONAL JOURNAL OF METALCASTING. . doi:10.1007/s40962-023-01047-0
  3. Okimura, Yasuhiko; Kato, Yusuke; Makino, Hiroyasu; Hashimoto, Kunihiro; Maeda, Yasuhiro; Okane, Toshimitsu; Faiz, Muhammad Khairi; Komine, Hideo; Miyashita, Tomoyuki; Yoshida, Makoto (2023). Proposition of new yield criterion for green sand mold and its experimental validation by FEM stress analysis of triaxial compression test, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY. 318. doi:10.1016/j.jmatprotec.2023.118020
  4. Yamani, Seyed Mehrdad; Raja, Sufian; bin Ariffin, Mohammad Ashraf; Mohd Isa, Mohammad Syahid; Muhamad, Mohd Ridha; Jamaludin, Mohd Fadzil; Yusof, Farazila; Hairuddin, Muhammad Khairi Faiz bin Ahmad (2023). Effects of Preheating on Microstructural and Mechanical Properties of Friction Stir Welded Thin Low Carbon Steel Joints, JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME. 145(2). doi:10.1115/1.4055909
  5. Krisdiyanto, Raja Ariffin; Ghazilla, Raja Ariffin Bin Raja; Azuddin, M.; Hairuddin, Muhammad Khairi Faiz Bin Ahmad; Muflikhun, Muhammad Akhsin; Risdiana, Nurvita; Afifuddin, Eki (2022). The hypodermic syringe performance based on the ISO 7886-1:2017: A narrative review, MEDICINE. 101(49). doi:10.1097/MD.0000000000031812
  6. Muhammad, Aisha; Ali, Mohammed A. H.; Turaev, Sherzod; Shanono, Ibrahim Haruna; Hujainah, Fadhl; Zubir, Mohd Nashrul Mohd; Faiz, Muhammad Khairi; Faizal, Erma Rahayu Mohd; Abdulghafor, Rawad (2022). Novel Algorithm for Mobile Robot Path Planning in Constrained Environment, CMC-COMPUTERS MATERIALS & CONTINUA. 71(2), 2697-2719. doi:10.32604/cmc.2022.020873
  7. Nagata, Y; Takai, R; Okane, T; Faiz, MK; Yoshida, M (2022). Influence of solid cohesion on viscous properties in Norton law for aluminum alloys during partial solidification, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 832. doi:10.1016/j.msea.2021.142339
  8. Ueda, Shoji; Sannakanishi, Shinji; Shiga, Hidetoshi; Faiz, Muhammad Khairi; Yoshida, Makoto (2022). Evaluation of Ejection Force for Die Castings by FEM Thermal Stress Analysis with Elasto-Plastic-Creep Model, MATERIALS TRANSACTIONS. 63(2), 217-223. doi:10.2320/matertrans.F-M2021852
  9. Faiz, MK; Uehara, K; Nakajima, T; Kanno, T; Hiramoto, Y; Miyashita, T; Okane, T; Yoshida, M (2021). Effect of Sand Mold Constraint on Warpage Deformation of Lamellar Graphite Gray Cast Iron and Prediction by Elastoplastic-Creep Finite Element Analysis, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE. 30(6), 4669-4680. doi:10.1007/s11665-021-05716-1
Scopus
  1. Okimura Y., Kato Y., Makino H., Hashimoto K., Maeda Y., Okane T., Faiz M.K., Komine H., Miyashita T., Yoshida M. (2023). Proposition of new yield criterion for green sand mold and its experimental validation by FEM stress analysis of triaxial compression test, Journal of Materials Processing Technology. 318. doi:10.1016/j.jmatprotec.2023.118020
Others
  1. Ao TSUCHIYA, Yoshihiro NAGATA, Takumi KUMAKI, Muhammad Khairi Faiz, Yasuhiko OKIMURA, Toshimitsu OKANE, Makoto YOSHIDA, Clarification of the mechanism of hot tearing susceptibility reduction by Sr addition in Al-Mg-Mn-based die casting alloy using acoustic emission method, Journal of The Japan Institute of Light Metals, Vol. 73, No. 7 (2023), 315-321
  2. Yoshihiro Nagata, Kiyotaka Kato, Takuma Shishido, Ao Tsuchiya, Sanji Kitaoka, Naoto Oshiro, Naomi Nishi, Naoki Nonaka, Takayuki Koike, Toshimitsu Oike, Kenji Hayashi, Hiroshi Kambe, Toshimitsu Okane, Muhammad Khairi Faiz, Makoto Yoshida. (2022). Development of High Ductility and Low Hot Tearing Susceptibility Non-Heat Treatment Al-Mg-Mn-Based Die Casting Alloy for Structural Parts of Automobile. Journal of Japan Foundry Engineering Society 94(11) 690~699, in JAPANESE
  3. Muhammad A., Mohammed A. H. A., Turaev S., Ibrahim H. S., Fadhl H., Mohd Z. M. N., Muhammad K. F., Erma R. M. F., Rawad A. (2021). CMC-computer, Materials&Continua.71(2), 2697-2719.
  4. Yoshihiro Nagata, Rikiya Onizawa, Masaya Someya, Hiromu Kotaki, Ryosuke Takai, Mikio Ebata, Toshimitsu Okane, Muhammad Khairi Faiz, Makoto Yoshida (2021) Measurement of viscous properties on Al-5mass%Mg alloy in semi-solid state by tensile test with high-frequency induction heating, Journal of The Japan Institute of Light Metals. 71(2) 112-120
  5. Naofumi Takatori, Mami Amano, Ryousuke Miyachi, Yoshihiro Nagata, Muhammad Khairi Faiz, Makoto Yoshida, Viscosity Properties Prediction of Semi-Solid Aluminum Alloys Using Finite Element Analysis Based on Quenched Solidified Structure, and Experimental Validation, MATERIALS TRANSACTIONS, 2020, Volume 61, Issue 12, Pages 2371-2377
  6. Ueda Shoji, Sannakanishi Shinji, Shiga Hidetoshi, Faiz Muhammad Khairi, Yoshida Makoto. (2020) Evaluation of Ejection Force for Die Castings by FEM Thermal Stress Analysis with Elasto-Plastic-Creep Model, Journal of Japan Foundry Engineering Society 92(11), 583-588
  7. Khairi Faiz Muhammad1, Takehiro Yamamoto, Makoto Yoshida. (2017). Low temperature and low pressure bonding of plateless Cu Cu substrates by Ag-based transient liquid phase sintering, J Mater Sci: Mater Electron (2017) 28:9351 9362
  8. M. Khairi Faiz, Kazuma Bansho, Tadatomo Suga, Tomoyuki Miyashita, Makoto Yoshida. (2017). Low temperature Cu Cu bonding by transient liquid phase sintering of mixed Cu nanoparticles and Sn Bi eutectic powders, J Mater Sci: Mater Electron (2017) 28:16433 16443
  9. Hiroyuki Shimano, M. Khairi Faiz, Asato Hara, Kyoko Yoshizumi, Makoto Yoshida, Susumu Horibe. (2016). Analysis of partially pulsating fatigue process on carbon steel with microstructural observation, Materials Science & Engineering A 651 (2016) 83- 88
Article in Proceeding
  1. Shingo Otake, Motohito Hori, Ryoichi Kato, Yoshinari Ikeda, Victor Parque, Muhammad Khairi Faiz, Makoto Yoshida, Tomoyuki Miyashita. (2021). Relationships of design parameters and the cooling performance of the spiral-fin heatsink, International Conference on Electronics Packaging (ICEP), Tokyo, Japan,pp. 161-162, doi: 10.23919/ICEP51988.2021.9451967.
  2. Shingo Otake, Yoshihiro Tateishi, Hiromichi Gohara, Ryoichi Kato, Yoshinari Ikeda, Victor Parque, Muhammed Khairi Faiz, Makoto Yoshida, Tomoyuki Miyashita, "Heatsink design using spiral-fins considering additive manufacturing," 2019 International Conference on Electronics Packaging (ICEP), Niigata, Japan, 2019, pp. 46-51, doi: 10.23919/ICEP.2019.8733558.
  3. Yoshihiro Tateishi, Hiromichi Gohara, Ryoichi Kato, Yoshinari Ikeda, Victor Parque, Tomoyuki Miyashita, Muhammad Khairi Faiz , Makoto Yoshida. (2019). On Design Optimization of Heat Sinks with Curvature Considerations for Additive Manufacturing. In: Rodrigues, H., et al. EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization. EngOpt 2018. Springer, Cham. https://doi.org/10.1007/978-3-319-97773-7_59
  4. M. K. Faiz, T. Yamamoto and M. Yoshida, "Low temperature and low pressure fluxless Cu-Cu bonding by Ag-based transient liquid phase sintering for high temperature application," 2017 IEEE CPMT Symposium Japan (ICSJ), Kyoto, Japan, 2017, pp. 195-198, doi: 10.1109/ICSJ.2017.8240115.
  5. M. K. Faiz, T. Yamamoto and M. Yoshida, "Sn-Bi added Ag-based transient liquid phase sintering for low temperature bonding," 2017 5th International Workshop on Low Temperature Bonding for 3D Integration (LTB-3D), Tokyo, Japan, 2017, pp. 34-34, doi: 10.23919/LTB-3D.2017.7947430.
  6. T. Yamamoto, M. K. Faiz, T. Suga, T. Miyashita and M. Yoshida, "Low temperature, low pressure, fluxless and plateless Cu-Cu bonding by Cu nano particle transient liquid phase sintering," 2017 IEEE CPMT Symposium Japan (ICSJ), Kyoto, Japan, 2017, pp. 139-140, doi: 10.1109/ICSJ.2017.8240132.

RESEARCH PROJECT

National
  1. 2022 - 2025, Fundamental Research Grant Scheme (FRGS)
    Formulated Metal Oxides For Microstructure-properties Relationship Digitization Through Machine Learning For Industry 4.0 ( Co-Researcher)
  2. 2022 - 2025, Fundamental Research Grant Scheme (FRGS)
    Digital Image Correlation Technique For Mechanical Properties Acquisition And Thermomechanical Assessment Of Thin Sintered Copper Nanoparticles Layer ( Principal Investigator(PI))
  3. 2022 - 2024, Others MOHE - Top 100 (IIRG)-IISS
    WP2: Mineral Carbonation for Carbon Capture and Utilisation in Malaysian Basalts Formation and Concrete ( Co-Researcher)
  4. 2021 - 2023, Others MOHE
    Development Of A Dedicated Wire-arc Additive Manufacturing (waam) Work Cell For The Production Of Near-net Shaped Large Sized Lightweight Metal Components ( Co-Researcher)
International
  1. 2020 - 2023, Grant-in-Aid for Early-Career Scientists
    Clarification of reduction behavior of oxide film on the surface of nanoscale copper particles by platinum-catalyzed formic acid ( Principal Investigator(PI))

CONSULTANCY PROJECT

  • Training for Csust, 2023/2024, Semester 1- Module: Design of Machine Elements (3 Credits), Changsha University of Science and Technology (CSUST), Project Leader/Lead Consultant
    02 Oct 2023 - 24 Nov 2023 (International)

PAPER PRESENTED

INVITED SPEAKER
  1. Low Temperature Cu-Cu Bonding by Transient Liquid Phase Sintering of Cu nanoparticle and Sn-Bi alloy powder [ ] Cu Sn-Bi Cu-Cu , Symposium on wiring/mounting technology and related material technology, THE INSTITUTE OF ELECTRONICS, INFORMATION AND COMMUNICATION ENGINEERS, SILICON MATERIALS DIVISION (International) (08 Feb 2018 - 08 Feb 2018)
ORAL PRESENTER
  1. Low temperature and low pressure fluxless Cu-Cu bonding by Ag-based transient liquid phase sintering for high temperature application, 2017 IEEE CPMT Symposium Japan (ICSJ), The Japan Institute of Electronics Packaging:JIEP (International) (20 Nov 2017 - 22 Nov 2017)
  2. Sn-Bi added Ag-based transient liquid phase sintering for low temperature bonding, 5th International Workshop on Low Temperature Bonding for 3D Integration (LTB-3D), The University of Tokyo, Japan (International) (16 May 2017 - 18 May 2018)
POSTER PRESENTER
  1. Copper particle size effect on the microstructure and mechanical properties of copper-based transient liquid phase sintering, Materials Science and Technology Conference and Exhibition 2019, The Minerals, Metals & Materials Society (International) (29 Sep 2019 - 03 Oct 2019)
  2. Low temperature, low pressure, fluxless and plateless Cu-Cu bonding by Cu nano particle transient liquid phase sintering, 2017 IEEE CPMT Symposium Japan (ICSJ), The Japan Institute of Electronics Packaging:JIEP (International) (20 Nov 2017 - 22 Nov 2017)

ACADEMIC/PROF. SERVICES

Evaluation
  1. (2022) Reviewer for The International Technical Postgraduate 2022, International, (Reviewer)
  2. (2021) Brenda Ling Chai Nee, University, (Internal Assessor)
  3. (2021) Hakimah Binti Ahmad Mahauddin, University, (Internal Assessor)
  4. (2021) Creep Damage Analysis and Numerical Simulation On Oil Well Steel Pipe Casing At Elevated Temperatures, University, (Internal Examiner)
  5. (2021) Stress Analysis of Mechanical Seal in Api 610 Pump, University, (Internal Examiner)
Contribution to external organisation
  1. (2022) Adjunct Researcher, International, (Research Fellow/Associate)
Contribution to event
  1. (2021) Guest Speaker, University, (Panelist/Moderator)

SUPERVISION

Postgraduate Student
PhD/ Doctoral
  1. (2023) EX-SITU MINERAL CARBONATION OF KUANTAN BASALT FOR INDUSTRIAL WASTE CARBON DIOXIDE LOCKUP, AMIR HOSSEIN MAZAHERI
  2. (2023) redesigning of hypodermic syringe barrel using stiffener, KRISDIYANTO
  3. (2023) POST-FIRE INFLUENCE ON MICROSTRUCTURAL AND MECHANICAL BEHAVIOR OF VARIOUS GRADES OF AUSTENITIC STAINLESS STEEL IN CONSTRUCTION APPLICATIONS, HAITHAM ABDALLAH KHAMIS
  4. (2023) ASSESSING POTENTIAL APPLICATION OF CRACK-FREE AUSTENITIC STAINLESS STEEL CYLINDRICAL CUPS FOR HYDROGEN STORAGE TANK USING HYDROGEN CHARGING PROCESS, PHOO YOONG HAU
Master
  1. (2023) THICK PALLADIUM COATED COPPER WIRE FREE AIR BALL (FAB) GRAIN SIZE EFFECT ON THE ALLUMINIUM BOND PAD IN COPPER WIRE BOND PROCESS, Pogganeswaran Gurusingam
  2. (2021) Development of elasto-viscoplastic constitutive model of Cu-based Pb-free composite solder for the application in wide-band-gap power module, Masayuki Shingai (Waseda University)
  3. (2020) Low temperature and low thermal resistivity bonding of copper fibre and thin solder film, Yuna Nakamura (Waseda University)
  4. (2020) A study on elasto-viscoplastic constitutive model for predicting low- cycle thermal fatigue damage of thermal interface material in wide-band-gap power module, Kensuke Nagashima (Waseda University)
Under Graduate Students
  1. (2023) Transient liquid phase bonding of In and Sn for high temperature power module application
  2. (2023) Elucidating the reduction behaviour of copper particles mixed with tin particles under formic acid environment equipped
  3. (2023) Development of Sn-solder matrix and Cu porous composite material for power electronics application
  4. (2023) Acquisition of mechanical properties of sintered copper nanoparticles for power electronics module application using the digital image correlation technique
  5. (2023) Practices, Sam Yong Pin, Chong Yu Wei, Lee Xhi Yang, Choong Shi Hong, Ahmad Zikri Adam bin Mohd Zaidi, Thishen a/l Kamaleswaran
  6. (2022) Investigating the effect of fillet on the thermomechanical behavior of sintered nanoparticles Ag in thermal cycle test using finite elemet method
  7. (2022) Practices, Muhammad Fikri bin Misnadi, Chia Wen Han, Soon Wee Teck, Ahamad Adzam Putra bin Ahamad, Muhammad Zharif bin Mad Shukri@Fazli
  8. (2021) Fatigue life prediction of power module with solder of different fillet geometries
  9. (2018) A study on thermal properties of Cu- based Pb-free composite solder for the application in power module (Waseda University)
  10. (2017) Low temperature bonding in wide-band- gap power module using copper nanoparticles and low temperature solder (Waseda University)

TEACHING

Master
  1. (2023) KQK7012 - Sustainability Energy Technology
Bachelor
  1. (2023) KIG2007 - Computer Programming
  2. (2023) KIG1010 - Fluid Mechanics 1
  3. (2022) KIG2007 - Computer Programming
  4. (2022) KIG1010 - Fluid Mechanics 1
  5. (2021) KIG1002 - Fluid Mechanics I
  6. (2021) KIG1002 - Fluid Mechanics I
  7. (2020) KIG2007 - Computer Programming
  8. (2020) KIG1007 - Mechanics of Materials I
  9. (2020) KIG1007 - Mechanics of Materials I
  10. (2020) KIG2007 - Computer Programming

PATENT/IPR

  • Manufacturing method of power electronics device
    Patent (International)

SOCIAL RESPONSIBILITY ACTIVITIES

  • Publicity and Website Coordinator, 5th International Conference On The Science and Engineering of Materials 2023 (Icosem2023), (21 Nov 2023 - 21 Nov 2023) (International)
  • Protocal and Event (Committee Member) for The 7th International Conference On Electrospinning 2022, (22 Nov 2022 - 24 Nov 2022) (International)

COURSE ATTENDED

Internal / External Course
INTERNAL COURSE- ORGANIZED BY PTJ
  1. EMERALD RESEARCH AND SUPERVISION, Online (08 Mar 2022 - 09 Mar 2022)
  2. EMERALD TEACHING AND LEARNING 2021, Microsoft Teams (17 Feb 2021 - 02 Mar 2021)
  3. ACU UM EARLY CAREER RESEARCHERS DEVELOPMENT PROGRAMME, Hotel Ve Bangsar South Kuala Lumpur (03 Jun 2022 - 03 Jun 2022)