Curriculum Vitae

PERSONAL DETAILS

DR. MOHD SAYUTI BIN AB KARIM

  • Senior Lecturer

  • Department of Mechanical Engineering
    Faculty of Engineering
  •    +603-79674447
  •   mdsayuti@um.edu.my

BIOGRAPHY

Dr. Mohd Sayuti Ab Karim obtained his Bachelor Degree in CAD/CAM Engineering from University of Malaya in 2006. Directly after his graduation, he pursued his postgraduate studies in Engineering Science. His postgraduate research for Master and Doctoral studies focused on Advanced Manufacturing Process. He obtained his PhD in 2013 and joined the Faculty of Engineering, University of Malaya thereafter.

Dr. Mohd Sayuti research career started in mid 2006 as a Research Assistant at Advanced Manufacturing and Material Processing (AMMP) Centre and had conducted many research projects related to design and manufacturing. Up to now, Dr. Mohd Sayuti has published more than 10 ISI publications and contributed to 2 books publications. Commercially, Dr Sayuti has been granted 3 patents. At the same time Dr. Mohd Sayuti is now holding the position as General Manager at Zecttron Sdn Bhd which is a Spin-off Company of University of Malaya.

Dr Sayuti is a registered member of Institutional Engineering Malaysia (IEM) and a registered graduate member of Board Engineer Malaysia (BEM) since 2012.

 

ADMINISTRATIVE DUTIES
(Role),(Level),(Duration)
  • Fellow, UNIVERISITI MALAYA, 01/01/2021 to present
  • College Treasurer, UNIVERISITI MALAYA, 01/01/2021 to present
  • Coordinator, Faculty, 01/09/2020 to present
  • Perlantikan Jawatankuasa INTER-INSTITUTIONAL COOPERATION , Faculty, 01/10/2019 to present
  • Pegawai Penerima Aset (PPA) Fakulti Kejuruteraan Universiti Malaya, Faculty, 03/09/2019 to present
  • Wakil Fakulti Bagi Hubungan Kerjasama(MOU) di antara UM dengan Curtin Universiti Malaya, Miri, Sarawak, Faculty, 01/10/2018 to present
  • College Treasurer, UNIVERISITI MALAYA, 02/01/2020 to 31/12/2020
  • Fellow, UNIVERISITI MALAYA, 02/01/2020 to 31/12/2020
  • Audit Aset Penyelidikan , Faculty, 21/09/2020 to 23/10/2020
  • Acting Head of Department, Faculty, 18/09/2020 to 18/09/2020
  • Appointed as Committee Members for revised curriculum , Faculty, 01/04/2020 to 01/05/2020
  • Appointed as Committee Members for Dean's Award Ceremony , Faculty, 04/03/2020 to 04/03/2020
  • JAWATANKUASA PENILAI, University Malaya, 02/01/2018 to 31/12/2020
  • College Secretary, UNIVERISITI MALAYA, 02/01/2019 to 31/12/2019
  • Fellow, UNIVERISITI MALAYA, 02/01/2019 to 31/12/2019
  • Acting College Master, UNIVERISITI MALAYA, 01/01/2019 to 28/02/2019
  • Menjalankan Fungsi Sebagai Ketua Jabatan, Faculty, 14/11/2019 to 15/11/2019
  • Auditor dan Auditee Kendiri di Fakulti Kejuruteraan, Universiti Malaya, Faculty, 12/11/2019 to 14/11/2019
  • Academic advisor, Faculty, 03/05/2019 to 31/12/2019
  • Committee members of Dean Lists Awards, Faculty, 24/04/2019 to 24/04/2019
  • Facilitator, University Malaya, 19/04/2019 to 21/04/2019
  • Facilitator for a visit from Universitas Bina Darma, Fakulitas Teknik, Indonesia to Faculty of Engineering, UM , Faculty, 08/02/2019 to 08/02/2019
  • Pengerusi Majlis Fellow UM (Student Affairs), University Malaya, 01/01/2019 to 31/12/2019
  • Acting Master, University Malaya, 01/01/2019 to 28/02/2019
  • Coordinator, Faculty, 01/12/2018 to 31/12/2019
  • Fellow, UNIVERISITI MALAYA, 01/01/2018 to 31/12/2018
  • College Secretary, UNIVERISITI MALAYA, 01/01/2018 to 31/12/2018
  • Acting Master, University Malaya, 17/12/2018 to 31/12/2018
  • Speaker, University Malaya, 30/01/2018 to 30/01/2018
  • Panel Penilai Geran, University Malaya, 24/01/2018 to 24/01/2018
  • Auditor, University Malaya, 01/01/2018 to 31/12/2018
  • Pengurus Risiko, University Malaya, 01/01/2018 to 31/12/2018
  • Petugas Khas, University Malaya, 03/09/2017 to 14/06/2018
  • AJK Pelaksana Makmal, Faculty, 03/09/2017 to 14/06/2018
  • Programme Coordinator, Faculty, 01/09/2017 to 31/08/2018
  • Penasihat Akademik, Faculty, 20/07/2017 to 20/07/2018
  • College Secretary, UNIVERISITI MALAYA, 01/01/2017 to 31/12/2017
  • Fellow, UNIVERISITI MALAYA, 01/01/2017 to 31/12/2017
  • Part Time Lecturer, Faculty, 03/09/2017 to 22/12/2017
  • Jawatankuasa semakan kurikulum & penambahbaikan program ijazah sarjana muda, Faculty, 01/04/2017 to 31/05/2017
  • Committee member, University Malaya, 09/03/2017 to 09/03/2017
  • Part time lecturer, University Malaya, 13/02/2017 to 24/06/2017
  • Acting College Master, University Malaya, 01/02/2017 to 12/02/2017
  • College Secretary, University Malaya, 11/01/2017 to 31/12/2017
  • AJK Quality Management System (QMS), Faculty, 01/01/2017 to 31/12/2017
  • Fellow, University Malaya, 01/01/2017 to 31/12/2017
  • Penasihat Akademik, Faculty, 01/11/2016 to 31/12/2017
  • Programme Coordinator, Faculty, 01/08/2016 to 31/12/2017
  • Jawatankuasa Buku Panduan Sesi 2016/2017, Faculty, 01/06/2016 to 31/05/2017
  • Fellow, UNIVERISITI MALAYA, 02/05/2016 to 31/12/2016
  • Pengacara Majlis, Faculty, 14/12/2016 to 14/12/2016
  • Head of Technical Unit - International Conference of Advanced Material Processing Technology, International, 08/11/2016 to 11/11/2016
  • Pencatat bagi Program Advokasi Ilmuwan Majlis Profesor Negara 2016, University Malaya, 27/10/2016 to 27/10/2016
  • Panel untuk Sesi Candidature Defence Ijazah Sarjana Institut Pengajian Siswazah Semester 1 Sesi 2016/2017, University Malaya, 22/09/2016 to 22/09/2016
  • Part Time Lecturer (KQG7017) for Semester 1 Session 2016/2017, Faculty, 05/09/2016 to 16/12/2016
  • Pengerusi Program peringkst Jabatan, Faculty, 01/09/2016 to 01/09/2016
  • APPOINTMENT AS CHAIRMAN 1 OF THE MALAYSIA-JAPAN INTERNATIONAL SYMPOSIUM ON TRIBOLOGY TECHNOLOGY (MYTRIBOS) 2016 - PART 1, International, 02/02/2016 to 02/02/2016
  • Member at AMMP Centre, Faculty of Engineering University of Malaya, Faculty, 07/01/2016 to present
  • Ahli Jawatankuasa Pengajian Ijazah Dasar (JPM) - 2016, Faculty, 06/01/2016 to 31/12/2016
  • Program's Coordinator for Bachelor of Engineering (Manufacturing), Faculty, 01/01/2016 to 31/12/2016
  • Acting Head of Department, Faculty, 31/12/2015 to 31/12/2015
  • Committee '2nd International Conference on the Science & Engineering of Materials (ICoSEM 2015)', International, 16/11/2015 to 18/11/2015
  • Member at AMMP Centre, Faculty of Engineering University of Malaya, Faculty, 01/04/2015 to present
  • Committee Member Pusat Pendidikan Berterusan Universiti Malaya, University Malaya, 04/08/2014 to 31/03/2015
  • Ahli Jawatankuasa Kurikulum Program, Faculty, 04/08/2014 to 03/08/2015
  • Committee 'AUN/SEED Net Regional Conference on Materials Engineering 2014', International, 01/11/2014 to 12/11/2014
ACADEMIC QUALIFICATION
(Qualification),(Field),(Institution),(Year)
  • SARJANA SAINS KEJURUTERAAN, SAINS KEJURUTERAAN, UNIVERSITI MALAYA (UM)
  • Doctoral Degree (PhD), LAIN-LAIN BIDANG KEJURUTERAAN, UNIVERSITI MALAYA (UM)
  • BACHELOR OF ENGINEERING (COMPUTER AIDED DESIGN AND MANUFACTURE), KEJURUTERAAN CAD/CAM, UNIVERSITI MALAYA (UM)
MEMBERSHIPS
(Organisation),(Role),(Duration),(Level)
  • ANSARA, Active Member, Since 2019 (National)
  • Centre For Research In Industry 4.09CRI 4.0), Active Member, 2018 to 2020 (University)
  • Institution of Mechanical Engineers, Charted Engineer, 2018 to 2019 (International)
  • Persatuan Pencinta Alam Malaysia (Malaysian Nature Society), Active Member, 2017 to 2020 (National)
  • Institution of Mechanical Engineers, Chartered Engineer, Since 2017 (International)
  • Board of Engineers, Malaysia, Active Member, Since 2014 (National)
  • Institution of Engineers Malaysia, Member, Since 2012 (National)
SPECIALIZATION
(Area)
Area of Expertise
  • MACHINING (CNC Milling, CNC Turning, Lubrication System)
  • TEACHING
    (Course Title),(Level of Study),(Institution),(Academic Session)
    Teaching
  • KCEP2113 - Basic Production Process, First Degree, UNIVERSITY MALAYA (2013/2014)
  • KCEC3109 - Technology Cnc/Cam, First Degree, UNIVERSITY MALAYA (2014/2015)
  • KXGX6101 - Research Metodology, Post Graduate, UNIVERSITY MALAYA (2014/2015)
  • KXGX6101 - Research Methodology, Post Graduate, UNIVERSITY MALAYA (2015/2016)
  • KXGX6101 - Research Metodology, Post Graduate, UNIVERSITY MALAYA (2014/2015)
  • KIG2008 - Manufacturing Technology, First Degree, UNIVERSITY MALAYA (2017/2018)
  • KMEM2218 - Product Development and Design, First Degree, UNIVERSITY MALAYA (2015/2016)
  • KIG1006 - Engineering Design and Modelling, First Degree, UNIVERSITY MALAYA (2017/2018)
  • KIX3002 - Engineering Entrepreneurship, First Degree, UNIVERSITY MALAYA (2018/2019)
  • KCEC4114 - Reverse Engineering, First Degree, UNIVERSITY MALAYA (2018/2019)
  • KQG7017 - Reverse Engineering & Rapid Prototyping, Post Graduate, UNIVERSITY MALAYA (2018/2019)
  • KMEM1104 - Engineering Drawing & Computer Aided Design, First Degree, UNIVERSITY MALAYA (2018/2019)
  • PUBLICATIONS
    (Title of publication in APA style)
    Refereed Journals
    2020
    • Alghani, Waleed; Ab Karim, Mohd; Bagheri, Samira; Gulzar, M; "Formulation, Tribological Performance, and Characterization of Base Oil with ZnO, Graphene, and ZnO/Graphene Nanoparticles Additives" Material Science and Engineering Technology, 2020. (Scopus, ISI Publication) accepted. (ISI-Indexed)
    • Alghani, Waleed; Ab Karim, Mohd; Bagheri, Samira; Gulzar, M; Different Nanoparticles Usage for Tribological Performance Improvement Industrial Lubrication and Tribology, 2020. (Scopus, ISI Publication) under consideration. (ISI-Indexed)
    • Md Moktar, Mohd Sayuti Ab Karim, Yew Hoong Wong, Mohd Hamdi Abd Shukor, Mohamad Sofian Abu Talip. Feasibility of Using CeO2/Water Dielectrical Nanofluid in Electrical Discharge Machining (EDM). Arabian Journal of Science and Engineering. (2020). Accepted. (ISI-Indexed)
    2019
    • Dambatta, Y. S., Sayuti, M., Sarhan, A. A., Hamdi, M., Manladan, S., & Reddy, M. (2019). Tribological performance of SiO2-based nanofluids in minimum quantity lubrication grinding of Si3N4 ceramic. Journal of Manufacturing Processes, 41, 135-147. (ISI-Indexed)
    • Dambatta, Y. S., Sayuti, M., Sarhan, A. A., Ab Shukor, H. B., Derahman, N. A. b., & Manladan, S. M. (2019). Prediction of specific grinding forces and surface roughness in machining of AL6061-T6 alloy using ANFIS technique. Industrial Lubrication and Tribology, 71(2), 309-317. (ISI-Indexed)
    • Alghani, W., Ab Karim, M. S., Bagheri, S., Amran, N. A. M., & Gulzar, M. (2019). Enhancing the Tribological Behavior of Lubricating Oil by Adding TiO2, Graphene, and TiO2/Graphene Nanoparticles. Tribology Transactions(just-accepted), 1-13. (ISI-Indexed)
    • Alghani, Waleed; Ab Karim, Mohd; Bagheri, Samira; Gulzar, M; "Characterization Investigation of ZnO, Graphene, and ZnO/Graphene Nanoparticles as Nanoscale Lubricants Additives" The Science and Engineering of Materials (ICoSEM), 2019. (Scopus, ISI Publication) accepted. (ISI-Indexed)
    2018
    • Dambatta, Y. S., Sayuti, M., Sarhan, A. A., & Hamdi, M. (2018). Comparative study on the performance of the MQL nanolubricant and conventional flood lubrication techniques during grinding of Si 3 N 4 ceramic. The International Journal of Advanced Manufacturing Technology, 1-18. (ISI-Indexed)
    • Shahnazar S, Bagheri S, Termehyousefi A, Mehrmashhadi J, Karim MSA, Kadri NA. (2018). Structure, mechanism, and performance evaluation of natural gas hydrate kinetic inhibitors. Reviews in Inorganic Chemistry, 38 (1), 1 - 20. (ISI-Indexed)
    • Mehdi Hourmand, Ahmed A. D. Sarhan, Saeed Farahany & Mohd Sayuti, Microstructure characterization and maximization of the material removal rate in nano-powder mixed EDM of Al-Mg2Si metal matrix composite ANFIS and RSM approaches, The International Journal of Advanced Manufacturing Technology, 2018. https://doi.org/10.1007/s00170-018-3130-3 (ISI-Indexed)
    • Armin Termeh Yousefi, Nahrizul Adib Kadri, Mohd Sayuti Ab Karim (2018). Enhancement of Graphene Quantum Dots Based Applications via Optimum Physical Chemistry: A Review. Biocybernetics and Biomedical Engineering. 38(3),481-497 (ISI-Indexed)
    • Aqilah, DN; Sayuti, AM; Farazila, Y; Suleiman, DY; Amirah, MAN; Izzati, WBWN 2018. Effects of Process Parameters on the Surface Roughness of Stainless Steel 316L Parts Produced by Selective Laser Melting. JOURNAL OF TESTING AND EVALUATION (ISI-Indexed)
    • A. Amran, M.Sayuti, A. Rusdi, T. Zaharinie, A. Latif Improvement of Methadone Maintenance Treatment (MMT) Process Through Development and Implementation of Methadone Dispenser, Journal of Testing and Evaluation (2018) (ISI-Indexed)
    2017
    • Bagheri S, Termehyousefi A, Mansouri N, Babadi AA, Karim MSA, Kadri NA. (2017) Carbon-Based Nanobiohybrid Thin Film for Amperometric Glucose Sensing. ACS Biomater. Sci. Eng., 2017, 3 (9), pp 2059 2063 DOI: 10.1021/acsbiomaterials.7b00325 (ISI-Indexed)
    • Rashid, S., et al., Optimized design of a hybrid PV wind diesel energy system for sustainable development at coastal areas in Bangladesh. Environmental Progress & Sustainable Energy, 2017. 36(1): p. 297-304 (ISI-Indexed)
    • Sadri, R., Hosseini, M., Kazi, S., Bagheri, S., Ahmed, S., Ahmadi, G., . . . Dahari, M. Sayuti. (2017). Study of environmentally friendly and facile functionalization of graphene nanoplatelet and its application in convective heat transfer. Energy Conversion and Management, 150, 26-36. (ISI-Indexed)
    • Mehdi, H., Ahmed, A. D. S., & Mohd, S. (2017). Characterizing the Effects of Micro Electrical Discharge Machining Parameters on Material Removal Rate during Micro EDM Drilling of Tungsten Carbide (WC-Co). IOP Conference Series: Materials Science and Engineering, 241(1), 012005. (ISI-Indexed)
    • Jalaludin, Abdul Hadi; Abd Shukor, Mohd Hamdi; Mardi, Noor Azizi; et al (2017). Development and evaluation of the machining performance of a CNC gantry double motion machine tool in different modes. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 93(1-4), 1347-1356 (ISI-Indexed)
    • Mohd Amran, N. A. B., Sayuti, M., Abd Rashid, R. B., Alghani, W., & Derahman, N. A. B. (2017). Material characterization of tribological effects in HSS hacksaw blade. Industrial Lubrication and Tribology, 69(3). (ISI-Indexed)
    • D. Aqilah, M.Sayuti, F. Yusof, Yusuf S. Dambatta, A. Amirah, W. N. Izzati (2017). Effects of Process Parameters on Surface Roughness of Stainless Steel 316L Parts Produced by Selective Laser Melting. (ISI-Indexed)
    • Hourmand, M; Sarhan, AAD; Sayuti, M 2017. Micro-electrode fabrication processes for micro-EDM drilling and milling: a state-of-the-art review. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (ISI-Indexed)
    • M Shalauddin, S Akhter, S Bagheri, MS Abd Karim, NA Kadri, WJ Basirun. Immobilized copper ions on MWCNTS-Chitosan thin film: Enhanced amperometric sensor for electrochemical determination of diclofenac sodium in aqueous solution. International Journal of Hydrogen Energy DOI: 10.1016/j.ijhydene.2017.06.163 (ISI-Indexed)
    • Syed, M. A., Kazi, S. N., Khan, G., Sadri, R., Dahari, M., Zubir, M. N. M., ... & Ibrahim, R. (2017). Effect of various refining processes for Kenaf Bast non-wood pulp fibers suspensions on heat transfer coefficient in circular pipe heat exchanger. Heat and Mass Transfer, 1-8. (ISI-Indexed)
    • M. Hourmand, A. A. D. Sarhan, M. Y. Noordin, and M. Sayuti (2017) Micro-EDM Drilling of Tungsten Carbide Using Microelectrode with High Aspect Ratio to Improve MRR, EWR, and Hole Quality. In: Hashmi, M.S.J. (ed.), Comprehensive Materials Finishing. vol. 1, pp. 267 321. Oxford: Elsevier. (ISI-Indexed)
    • Weiwei Wang, Yin Liu, Mohd Sayuti Bin Ab Karim, and Nor Amirah binti Mohd Amran. (2017). Visual Related Analysis and Application of Saline Soil Culture Design Factors. International Journal of Multimedia and Ubiquitous Engineering. Vol. 12, No. 8, pp. 43-54 (SCOPUS-Indexed)
    • Dambatta, YS; Sarhan, AAD; Sayuti, M; Hamdi, M 2017. Ultrasonic assisted grinding of advanced materials for biomedical and aerospace applications-a review. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (ISI-Indexed)
    2016
    • Mahamudul, H., et al., Temperature Regulation of Photovoltaic Module Using Phase Change Material: A Numerical Analysis and Experimental Investigation. International Journal of Photoenergy, 2016. 2016. (ISI-Indexed)
    • M. Hourmand, A. A. D. Sarhan and M. Sayuti, (2016) Micro-electrode fabrication processes for micro-EDM drilling and milling: a state-of-the-art review, The International Journal of Advanced Manufacturing Technology, 1-34. (Springer, IF 2.209,) (SCOPUS-Indexed)
    • Alghani, Waleed; Ab Karim, Mohd; Bagheri, Samira; "Optimization the Tribological Characteristics of Lube Oil with Nano Graphene and Metal Oxides" Renewable and Green Energy, 2016. Doctoral Research Seminar at Cube 2, Engineering Summit accepted. (ISI-Indexed)
    • Alghani, Waleed; Ab Karim, Mohd; Bagheri, Samira; "Adding Nano Titanium Dioxide Anatase and Graphene to Base Oil Group for Lubrication Optimization" Advanced Processes and Systems in Manufacturing (APSIM), 2016, (Scopus, ISI Publication) accepted. (ISI-Indexed)
    • Alghani, Waleed; Ab Karim, Mohd; Bagheri, Samira; "Improvement the Tribological Properties of Lube Oil with Nanoparticles Additives" Tribology and Lubrication, 2016. Higher Degree Seminar, Faculty of Engineering, University of Malaya, at Alumni Meeting Room, Level 4, Faculty of Engineering accepted. (ISI-Indexed)
    • Rashid, S., Rana, S., Shezan, S. K. A., A.B. Karim, S., & Anower, S. (2016). Optimized design of a hybrid PV-wind-diesel energy system for sustainable development at coastal areas in Bangladesh. Environmental Progress & Sustainable Energy, doi: 10.1002/ep.12496 (ISI-Indexed)
    • Sohel Rana, A. W. R., Mohd Sayuti. (2016). Analysis of Fourier and Non-Fourier Heat Conduction using Tikhonov based Well-conditioned Asymptotic Waveform Evaluation Technique. Journal of Computer Science & Computational Mathematics, 6(3). doi:10.20967/jcscm.2016.03.007 (ISI-Indexed)
    • Hourmand, M., Sarhan, A. A. D., & Sayuti, M. (2016). Micro-electrode fabrication processes for micro-EDM drilling and milling: a state-of-the-art review. The International Journal of Advanced Manufacturing Technology, 1-34. doi:10.1007/s00170-016-9671-4 (ISI-Indexed)
    • Mahamudul, H., Rahman, M. M., Metselaar, H. S. C., Mekhilef, S., Shezan, S. A., Sohel, R., . . . Badiuzaman, W. N. I. (2016). Temperature Regulation of Photovoltaic Module Using Phase Change Material: A Numerical Analysis and Experimental Investigation. International Journal of Photoenergy, 2016, 8. doi: 10.1155/2016/5917028 (ISI-Indexed)
    2015
    • Ooi, M.E., Sayuti, M., & Sarhan, A.A.D. (2015). Fuzzy logic-based approach to investigate the novel uses of nano suspended lubrication in precise machining of aerospace AL tempered grade 6061. Journal of Cleaner Production, 89, 286-295. doi: http://dx.doi.org/10.1016/j.jclepro.2014.11.006 (ISI-Indexed)
    2014
    • Bizhan Rahmati, Ahmed A. D. Sarhan, Sayuti,M. 2013 Morphology of surface generated by end milling AL6061-T6 using molybdenum disulfide (MoS2) nanolubrication in end milling machining. Journal of Cleaner Production 2014. 66:685-691 (ISI-Indexed)
    • Bizhan Rahmati, Ahmed A. D. Sarhan, Mohd Sayuti, Investigating the optimum molybdenum disulfide (MoS2) nanolubrication parameters in CNC milling of AL6061-T6 alloy. The International Journal of Advanced Manufacturing Technology:70(5-8):1143-1155 (ISI-Indexed)
    • M. Sayuti, O. M. Erh, Ahmed A. D. Sarhan, & M. Hamdi. 2014. Investigation on the morphology of the machined surface in end milling of aerospace AL6061-T6 for novel uses of SiO2 nanolubrication system. Journal of Cleaner Production. 66:655-663 (ISI-Indexed)
    • Sayuti, M., Sarhan, A. A. D., Salem, F. 2014. Novel uses of SiO2 nano-lubrication system in hard turning process of hardened steel AISI4140 for less tool wear, surface roughness and oil consumption. Journal of Cleaner Production (ISI-Indexed)
    2013
    • M. Sayuti, Ahmed A. D. Sarhan, F. Salem, 2013. Development of SiO2 Nanolubrication System for better surface Quality, More Power Savings and Less Oil Consumption in Hard Turning of Hardened Steel AISI4140. Advanced Materials Research 748:56-60 (ISI-Indexed)
    • Sayuti, M., Sarhan, A. A. D., Hamdi, M. 2013. An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy. International Journal of Advanced Manufacturing Technology (ISI-Indexed)
    • Sayuti, M., Sarhan, A. A. D., Tanaka, T., Hamdi, M., Saito, Y. 2013. Cutting force reduction and surface quality improvement in machining of aerospace duralumin AL-2017-T4 using carbon onion nanolubrication system. International Journal of Advanced Manufacturing Technology (ISI-Indexed)
    2012
    • M. Sayuti, Ahmed A. D. Sarhan,& M. Hamdi. An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy. The International Journal of Advanced Manufacturing Technology,1-17,2012. 67(1-4):833-849 (ISI-Indexed)
    • Ahmed A. D. Sarhan, M.Sayuti, M. Hamdi. 2012. Reduction of power and lubricant oil consumption in milling process using a new SiO2 nanolubrication system. The International Journal of Advanced Manufacturing Technology,63(5-8):505-512. Q2 (ISI-Indexed)
    • M. Sayuti, Ahmed A. D. Sarhan, Tomohisa Tanaka, M. Hamdi, Yoshio Saito. 2012. Cutting Force Reduction and Surface Quality Improvement in Machining of Aerospace Duralumin AL-2017-T4 Using Carbon Onion Nanolubrication System. International Journal of Advanced Manufacturing Technology.65(9-12):1493-1500. Q2 (ISI-Indexed)
    • Sayuti, M., Sarhan, A. A. D., Fadzil, M., Hamdi, M. 2012. Enhancement and verification of a machined surface quality for glass milling operation using CBN grinding tool-Taguchi approach. International Journal of Advanced Manufacturing Technology (ISI-Indexed)
    2011
    • M.Sayuti, Ahmed A. D. Sarhan, M. Fadzil, M. Hamdi. 2011. Enhancement and verification of a machined surface quality for glass milling operation using CBN grinding tool-Taguchi approach. The International Journal of Advanced Manufacturing Technology. Q2 (ISI-Indexed)
    • M. Sayuti, Ahmed A. D. Sarhan, Hamdi, M. 2011.Optimizing the machining parameters in glass grinding operation on the CNC milling machine for best surface roughness. Advanced Materials Research (154- 155)721-726. (SCOPUS-Indexed)
    • M.Sayuti, Ahmed A. D. Sarhan, M. Hamdi,2011. Materials and Manufacturing Processes, 2011. 26(8):969-976. (ISI-Indexed)
    Book Chapter
    2017
    • Hourmand, M., Sarhan, A.A.D., Noordin, M.Y., and Sayuti, M. (2017) Micro-EDM Drilling of Tungsten Carbide Using Microelectrode with High Aspect Ratio to Improve MRR, EWR, and Hole Quality. In: Hashmi, M.S.J. (ed.), Comprehensive Materials Finishing. vol. 1, pp. 267 321. Oxford: Elsevier.
    • Marashi, H., Sarhan, A.A.D., Maher, I., and Sayuti, M. (2017) Techniques to Improve EDM Capabilities: A Review. In: Hashmi, M.S.J. (ed.), Comprehensive Materials Finishing. vol. 1, pp. 171 202. Oxford: Elsevier.
    2015
    • Karim, M. and A. Sarhan (2015). ANFIS Modeling for Higher Machining Performance of Aluminium Tempered Grade 6061 Using Novel SIO2 Nanolubrication. Transactions on Engineering Technologies. H. K. Kim, M. A. Amouzegar and S.-l. Ao, Springer Netherlands: 551-565.
    2013
    • M. Sayuti, Ahmed A. D. Sarhan, M. Hamdi, Surface Quality Improvement in CNC End Milling of Aluminum Alloy Using Nanolubrication System, Springer international publisher Pte Ltd., Lecture Notes in Electrical Engineering, Volume 229, 2013, pp 669-683
    Article in Proceeding
    2018
    • Sayuti, M (2018) Quality Control of Palm Kernel Oil Using Individual Moving Range (I-MR) Chart. In: The 2nd International Mechanical and Industrial Engineering Conference (IMIEC) 1-11. doi.org/10.1051/matecconf/201820401006 (ISI-Indexed)
    • Kamarulazwan M, Sayuti M, Zaharini T & Azizan. (2018) A descriptive analysis to develop technologies capability database for rapid tooling application. Proceedings of Mechanical Engineering Research Day, 184-186 (ISI-Indexed)
    • Derahman N Aqilah, Ab Karim M Sayuti, Mohd Amran N Amirah. Effects of process parameters on surface quality of parts produced by selective laser melting-ANFIS modelling. Proceedings of Mechanical Engineering Research Day. 115-116 (ISI-Indexed)
    • Nor Amirah Mohd Amran, Mohd Sayuti Ab Karim, Rusdi Abd Rashid, Nur Aqilah Derahman. Implementation of methadone dispenser in drug addiction treatment program. Proceeding of Mechanical Engeneering Research Day 2018, 143-145. (Non-ISI/Non-SCOPUS)
    2016
    • Wan Nur Izzati Wan Badiuzaman, Mohd Sayuti Ab Karim, Aly Diaa Mohammed Sarhan, Mehdi Hourmand. (2016). FABRICATION OF SPIRAL BEVEL GEAR BY USING CADCAM AND 5 AXIS CNC MACHINE. Paper presented at the Proceedings of International Conference on Advanced Processes and Systems in Manufacturing (APSIM 2016), Putrajaya, Malaysia. (ISI/SCOPUS Indexed Publication)
    • Waleed Alghani, Mohd Sayuti Ab Karim, Samira Bagheri, Nor Amirah Mohd Amran. (2016). Fostering the Tribological Performance of the Base Oil with Nano Additives Particles. Paper presented at the Proceedings of International Conference on Advanced Processes and Systems in Manufacturing (APSIM 2016), Putrajaya, Malaysia. (ISI/SCOPUS Indexed Publication)
    2014
    • Ahmed. A. D. Sarhan, M. Sayuti, M. Hamdi,Investigate the Possibility of Using Carbon Onion Nanolubrication with DLC Cutting Tool for Lower Machining Power Consumption, The International Conference on Advances in Mechanical and Automation Engineering- MAE 2014, Rome, Italy, June 07-08, 2014. (Non-ISI/Non-SCOPUS)
    • A. Hamdan, M.Sayuti, Ahmed. A. D. Sarhan (Presenter), M. Hamdi, Investigate the machining performance of AISI304 stainless steel using thin pulse jet and fluid atomizer minimal quantity lubrication systems, International Conference on Machine Learning, Electrical and Mechanical Engineering (ICMLEME'2014), Jan. 8-9, 2014, Dubai (UAE) 2014 (SCOPUS-Indexed)
    2013
    • M. Sayuti, Ahmed. A. D. Sarhan(Presenter), M. Hamdi, Development of SiO2 Nanolubrication System for better surface Quality, More Power Savings and Less Oil Consumption in Hard Turning of Hardened Steel AISI4140,The 2013 4th International Conference on Material and Manufacturing Technology (ICMMT 2013) (Non-ISI/Non-SCOPUS)
    • Ahmed. A. D. Sarhan, N. K. Siong, Sayuti, Determining the Effect of Cutting Parameters on Machining Performances in Hard Turning Operation, 5th AUN/SEED-Net Regional Conference on Mechanical and Aerospace Technology, 2013 (SCOPUS-Indexed)
    2012
    • M. Sayuti, Tomohisa Tanaka, Ahmed A. D. Sarhan, Yoshio Saito, M. Hamdi, Surface Quality Improvement in CNC End Milling of Aerospace AL-2017-T4 Alloy using Carbon Onion Nanolubrication with DLC Cutting Tool (Non-ISI/Non-SCOPUS)
    Mass Media(Newspaper,Radio,TV,Popular Magazine)
    2018
    • Mohd Sayuti Ab Karim. (2018, Februari 29), GACC shi jie da zhuan guo ji xi yang qi sai, shuang wei da xue Yang Litian zhai guan. Sin Chew Daily.
    • Mohd Sayuti Ab Karim. Nor Amirah Mohd Amran. (2018, Februari 26), Pisau Daripada Bahan Terpakai. Utusan Malaysia.
    • Mohd Sayuti Ab Karim. (2018, Januari 14), Selamat Pagi Malaysia 2018 - KEJOHANAN CATUR GACC. Berita Nasional RTM TV 1.
    • Mohd Sayuti Ab Karim. (2018, Januari 23), Catur Miliki Tarikan Tersendiri. Nasional. Sinar Harian.
    2017
    • Mohd Sayuti Ab Karim. (2017, March 7). Bakti Siswa UM Bersama Pelajar Tahfiz. Utusan Malaysia.
    • Mohd Sayuti Ab Karim, Mohd Hamdi Abd Shukor, Siti Nurmaya Musa, Farazila Yusof, Rusdi Abd Rashid, Noor Azizi Mardi & Ahmed Aly Diaa Mohammed Sarhan. (2017, Mac 9), Mesin Pendispensan Metadon. Harian Metro (Metro Ahad).
    • Mohd Sayuti Ab Karim. (2017, April 10), Inovasi Bata Interlock. Utusan Malaysia.
    • Mohd Sayuti Ab Karim. (2017, Mac 30), UM Rai Pelajar Madrasah. Utusan Malaysia.
    • Mohd Sayuti Ab Karim. (2017, Julai 13), Inovasi Batu Bata Bentuk Ala Lego. Inovasi. Berita Harian.
    • Mohd Sayuti Ab Karim. (2017, Julai 17), Didik pelajar mengenai kebersihan diri. Rentak kampus. Kosmo!.
    • Mohd Sayuti Ab Karim. Nor Amirah Mohd Amran. (2017, Julai 27), Pisau Istimewa daripada Mata Gergaji Terpakai. Inovasi. Berita Harian.
    • Mohd Sayuti Ab Karim. Nor Amirah Mohd Amran. (2017, Ogos 9), Reka Bentuk Pisau daripada Mata Gergaji Terpakai. Inovasi. Kosmo.
    • Mohd Sayuti Ab Karim & Hafiz Jamaludin. (2017, Ogos 10), Alat Pengering Makanan Laut Berfungsi Siang Malam. Varsiti. Berita Harian.
    2016
    • Mohd Sayuti Ab Karim. (2016, August 10). Mesin Larik Komersial Pertama di Malaysia. Kosmo! (Infiniti Section in Inovasi, Sains & Gajet), p. 34.
    • Mohd Sayuti Ab Karim. (2016, August 30). UM hasilkan mesin larik komersial pertama Malaysia. Utusan Malaysia.
    • Mohd Sayuti Ab Karim. (2016, September 7). Mesin Larik Komersial UM hasilkan inovasi pertama Malaysia. Berita Harian (Rencana Section in Inovasi Kampus), p. 8.
    RESEARCH PROJECT
    (Project title),(Role),(Duration),(Level)
    Fundamental Research Grant Scheme (FRGS)
  • Investigation On Grindability Of Hard Ceramics And Superalloys Using Assisted Nanolubrication System With Ultrasonic Technology (RM89,900), Principal Investigator(PI), 2014 - 2017 (National)
  • A Study of Lubrication Performance with Suspended Nanoparticle During Machining Operation, (Members), 2009-2011, Fundamental Research Grant Scheme (FRGS Funding) RM59,000, Research member, 2009 - 2011 (National)
  • Universiti Malaya
  • Peruntukan Penyelidikan Pascasiswazah (PPP) Agihan 1 2011, University of Malaya, RM27,000. , PhD Candidate, 2011 - 2014 (National)
  • University of Malaya
  • Peruntukan Penyelidikan Pascasiswazah (PPP) Agihan 1 2007, University of Malaya, RM2,500., Master Student, 2007 - 2009 (National)
  • SUPERVISION
    Postgraduate Student
    (Title of Thesis),(Name of Candidates),(Institution),(Academic Level)
    Ongoing
    • EVALUATION OF CUTTING PARAMETERS AND INFLUENCE VIBRATION ASSISTED VERY HIGH SPEED DRILLING ON CARBON FIBRE REINFORCED POLYMER, MEHDI HOURMAND, University of Malaya (UM) (Post Graduate Student)
    • Effects Of Heat Transfer in Jig Molds in Injection Casting, Hussam Abdullah Moussa, University of Malaya (UM) (Post Graduate Student)
    • Research on reconstruction of bone structure based on 3D printing, LIU, XUN, University of Malaya (UM) (Post Graduate Student)
    • Preparation, Tribological Behavior, and Characterization of Lube Oil with Nanoparticles Additives, WALEED ABBAS NOORI ALGHANI, University of Malaya (UM) (Post Graduate Student)
    • PERFORMANCE EVALUATION OF ELECTRICAL DISCHARGE MACHINING USING CERIUM OXIDES NANOFLUID AND MULTI-METAL OXIDE AS POWDER MIXED DIELECTRICAL FLUID, MD. MOKTAR HOSSAIN, University of Malaya (UM) (Post Graduate Student)
    • AN INVESTIGATION OF METHADONE MAINTENANCE TREATMENT (MMT) EFFECTIVENESS FROM TECHNOLOGY DEVELOPMENT FOR DRUG ADDICT IN MALAYSIA, NOR AMIRAH BINTI MOHD AMRAN, University of Malaya (UM) (Post Graduate Student)
    Completed
    • THE EFFECTS OF ENERGY DENSITY ON THE MECHANICAL PROPERTIES OF SS316L PRODUCED BY SELECTIVE LASER MELTING, NUR AQILAH BINTI DERAHMAN, University of Malaya (UM) (Post Graduate Student)
    • Grinding of Si3N4 ceramic using nano-particles suspended in vegetable oil based lubricants, YUSUF SULEIMAN DAMBATTA, University of Malaya (UM) (Post Graduate Student)
    Undergraduate Student
    (Title of Thesis),(Academic Session)
    Ongoing
    • DEVELOPMENT OF WATER SAMPLER FOR EFFICIENCY AND LOW COST MAINTENANCE, 2014/2015
    • A FEASIBILITY PROCESS ON RECYCLING METAL WASTE MATERIAL FOR HOME APPLIANCE, 2014/2015
    • CHARACTERIZATION OF CAMERA MODULE PERFROMANCE AGAINST ENVIRONMENTAL PARAMETERS, 2014/2015
    PATENT/IPR
    (Product Name),(Type),(Level)
    • APPARATUS FOR DISPENSING LIQUID MEDICATION AND METHOD THEREOF, Patent (National)
    • Molybdenum Disulphide Nano-based Lubricant, Patent (National)
    • Molybdenum Disulphide Nano-Based Lubricant, Grant Of A Patent (National)
    • A Nano Liquid Lubrication Composition and its Preparation Method , Patent (National)
    • Pulse Jet Cooling Apparatus for Minimal Quantity Lubricant Application, Patent (National)
    • Apparatus for protecting automobile fuel gauge, Patent (National)
    SOCIAL RESPONSIBILITY ACTIVITIES
    (Contribution to Society),(Duration),(Level)
    • Panel Penemuduga Virtual Mock Interview MRSM Pasir Salak, Perak, 28/11/2020 to 28/11/2020
    • INTERVIEWER ON VIRTUAL MOCK INTERVIEW MRSM PASIR SALAK (VMIPS20), 21/11/2020 to 28/11/2020
    • Reviewing article of "Arabian Journal for Science and Engineering", 07/08/2020 to 07/08/2020
    • Pegawai pengiring semasa operasi penghantaran pulang pelajar Universiti Malaya, 01/05/2020 to 31/08/2020
    • Penyertaan Kursus Orentasi Felo & Pembantu Felo Tahun 2020, 14/02/2020 to 16/03/2020
    • Appointed as a judge in Carnival STEM in Kolej Tunku Kursiah, 31/10/2019 to 31/10/2019
    • Appointment As HRDF Task Force Leader Of Centre For Research In Industry 4.0 (CR1 4.0), Universiti Malaya., 21/10/2019 to 01/01/2022
    • Presenter for 2018 poster competition, 15/04/2019 to 17/04/2019
    • Panel Penasihat Teknikal Bagi Program Teknologi Pemesinan Perindustrian Kolej Vokasional Sungai Buloh, 07/01/2019 to 31/12/2020
    • Pelantikan sebagai Auditor di Kolej Kediaman Tuanku Bahiyah (2), Universiti Malaya, 31/12/2018 to 01/01/2018
    • Pelantikan sebagai Pengurus Risiko di Kolej Kediaman Tuanku Bahiyah (2), Universiti Malaya, 31/12/2018 to 01/01/2018
    • Pemain Bolasepak Wakil Fakulti Kejuruteraan di Liga Piala TNCP UM 2018, 01/11/2018 to 01/12/2018
    • Pelapor untuk program Seminar Sistem Pendidikan Finland, 17/10/2018 to 17/10/2018
    • Ahli jawatankuasa penganjur Majlis Perasmian Rumah Kelab PAUM & Santapan Malam, 06/08/2018 to 25/09/2018
    • Kursus TOT Modul LDK MHS 2018/2019 Felo dan Pembantu Felo Kolej Kediaman Universiti Malaya, 20/07/2018 to 21/07/2018
    • Taklimat Penanda Arasan Bagi Persediaan Akreditasi MQA Kolej Vakasional Sg Buloh , 02/05/2018 to 02/05/2018
    • SEMINAR RAWATAN KETAGIHAN DADAH, ALKOHOL & NIKOTIN DI MALAYSIA, 14/03/2018 to 14/03/2018
    • PHARMACY REVOLUTION 4.0, 11/03/2018 to 11/03/2018
    • Speaker for Research Grant Briefing: Prototype Research Grant Scheme (PRGS) & Long-Term Research Grant Scheme (LRGS), 30/01/2018 to 30/01/2018
    • Panel Penilai bagi Permohonan Geran Prototaip UM KITAR-2018, 24/01/2018 to 24/01/2018
    • Lawatan Pelajar Pusat Asasi Sains Universiti Malaya (PASUM) ke Fakulti Kejuruteraan Universiti Malaya, 19/01/2018 to 19/01/2018
    • PERODUA ECO-CHALLENGE, 29/11/2017 to 29/11/2017
    • Pelapor Sempena Higher Education Forum (HEF) 2017: Redesigning Education for Industry 4.0 Kuala Lumpur Convention Centre (KLCC), 23/11/2017 to 24/11/2017
    • Organizing Committee of the 3rd International Conference on the Science & Engineering of Materials (ICoSEM 2017), 24/10/2017 to 25/10/2017
    • Guest for AGM & Introduction Night of Robotics Engineering Design (R.E.D), 28/09/2017 to 28/09/2017
    • Industrial Visit - Hebei Baofeng Steel Structure di Botou, China, 25/09/2017 to 28/09/2017
    • Pelapor Seminar Revolusi Industri 4.0 Kementerian Pendidikan Tinggi , 24/08/2017 to 25/08/2017
    • Member of the Organizing Committee of International Conference on Advances in Materials and Processing Technologies (AMPT 2016), 08/11/2016 to 11/11/2016
    • Perhimpunan Sambutan Maal Hijrah Peringkat Kebangsaan Tahun 1438H/2016M, 02/10/2016 to 02/10/2016
    • Chairperson in The International Conference on Advanced Processes & Systems in Manufacturing (APSIM 2016), 28/08/2016 to 30/08/2016
    • Team Malaysia Fan Run Support Our Champions, 17/07/2016 to 17/07/2016
    • Penyelaras Keusahawanan Fakulti-UMEC, 01/06/2016 to 30/06/2018
    • Penyelia Program SiswaPreneur @ PPRN 2016/2017, 01/05/2016 to 30/04/2017
    • Krispy Kreme Doughnuts Joy Run by Larian Spektra, 24/04/2016 to 24/04/2016
    • Sokongan terhadap projek KIK "Angle Bed Care" kumpulan TA Power, 18/04/2016 to 18/04/2016
    • Mentor for Beyond Engineering Innovation (BEGIN) Challenge Program 2015/2016, 09/03/2016 to 25/05/2016
    • Local Committee Hong Kong Society of Mechanical Engineers, 27/02/2016 to 29/02/2016
    • APPOINTMENT AS CHAIRMAN 1 OF THE MALAYSIA-JAPAN INTERNATIONAL SYMPOSIUM ON TRIBOLOGY TECHNOLOGY (MYTRIBOS) 2016 - PART 1, 02/02/2016 to 04/02/2016
    • Trainer Electric Die Sinking (EDM) Technology, 22/06/2015 to 24/06/2015
    • Trainer for Training Autodesk Inventor for Basic and Intermediate to Lecturer of Vocational College , 15/06/2015 to 17/06/2015
    • Mentor for Beyond Engineering Innovation (BEGIN) Challenge Program 2015, 29/04/2015 to 29/04/2015
    • Mengadakan Latihan Pengenalan Kepada Penggunaan Mesin CNC Lathe, 23/01/2015 to 23/01/2015
    • Member of Malaysian Nature Society (Membership no. FE31756B), 01/10/2014 to 30/09/2017
    ACADEMIC/PROFESSIONAL SERVICES
    Evaluation Activity
    (Activity),(Duration),(Category)
  • Reviewer for International STEM Journal 2020 , 2020 to 2020 (Article in Proceeding)
  • Internal Examiner for PhD students (Naveed Akram) 2020 , 2020 to 2020 (Thesis)
  • Editorial Board for Dicle University Journal of Institute of Natural and Applied Science (DUFED) , 2020 to 2021 (Article in Journal)
  • Reviewer of Manuscript for The International Journal of Advanced Manufacturing Technology., 2020 to 2020 (Article in Journal)
  • Reviewer of Manuscript for the Journal of Science and Technology , 2019 to 2019 (Article in Journal)
  • Reviewer of Manuscript for ICoSEM2019 Conference , 2019 to 2019 (Conference)
  • Reviewer of Manuscript for the International Journal of Mechanical Science , 2019 to 2019 (Article in Journal)
  • Reviewer of Manuscript for the International Journal of Mechanical Sciences , 2019 to 2019 (Article in Journal)
  • Internal examiner of Doctoral Thesis for Examination (Research Mode) , 2018 to 2018 (Thesis)
  • Internal examiner of Doctoral Thesis for Examination (Research Mode), 2018 to 2018 (Thesis)
  • Internal examiner of Master Thesis for Examination , 2018 to 2018 (Thesis)
  • Reviewer of Manuscript for the Conference Paper , 2017 to 2017 (Conference Paper)
  • Peer review for Advances in Material & Processing Technologies Conference (AMPT 2016) for publication in Procedia Engineering, Elsevier entitled Study on a New 3D Porous Polymer Printing Based on EPP Beads Containing CO2 Gas, 2016 to 2016 (Article in Journal)
  • Peer review of Manuscript for Advances in Material & Processing Technologies Conference (AMPT 2016) for publication in Procedia Engineering, Elsevier , 2016 to 2016 (Article in Journal)
  • Review for International Journal of Mechanical Engineering (Scopus Index) Manuscript entitled "TRIZ APPROACH TO DETERMINE THE FABRICATION TECHNIQUE FOR DIMPLE STRUCTURE FABRICATION ", 2016 to 2016 (Article in Journal)
  • Review for Advances in Mechanical Engineering, Manuscript entitled "An experimental study of the cutting force and surface roughness when cutting 1Cr13 martensitic stainless steel with a coated carbide tool", 2016 to 2016 (Article in Journal)
  • Peer review of Manuscript for Advances in Material & Processing Technologies Conference (AMPT 2016) for publication in Procedia Engineering, Elsevier , 2016 to 2016 (Article in Journal)
  • Peer review of Manuscript for Advances in Material & Processing Technologies Conference (AMPT 2016) for publication in Procedia Engineering, Elsevier, 2016 to 2016 (Article in Journal)
  • THE EFFECTS OF ROLLER BURNISHING IN ENHANCING SURFACE CHARACTERISTICS OF POLYMERIC MATERIALS FUZZY AND FEA, 2016 (Thesis)
  • DEVELOPMENT OF A NEW PERFORMANCE CRITERIA FOR HIGHER WIRE-ELECTRIC DISCHARGE MACHINING PERFORMANCE CONSIDERING THE ECOLOGICAL AND ECONOMICAL ASPECTS, 2016 (Thesis)
  • Experimental evaluation of the lubrication properties of the wheel/workpiece interface in MQL grinding using different types of vegetable oils. Journal of Cleaner Production , 2015 (Article in Journal)
  • ACADEMIC JOURNAL UITM PULAU PINANG VOL. 11, NO. 1 CHARACTERIZATION OF HYDRODYNAMIC FLOW FOCUSING SINGLE PARTICLE DETECTION, 2015 (Article in Journal)
  • Journal of Cleaner Production, 2015 to 2015 (Article in Journal)
  • A STUDY ON TOOL WEAR DUE TO DIFFERENT MACHINING PARAMETERS USING COMPUTER'S VISION METHOD, 2015 (Thesis)
  • Evaluation of Tool Wear and Edge Geometry for High Precision Hard Turning of Tool Steel , 2015 to 2015 (Thesis)
  • STRUCTURAL AND MECHANICAL PROPERTIES OF TRANSITION METAL NITRIDE BASED COATINGS DEPOSITED BY MAGNETRON SPUTTERING AND ELECTRODEPOSITION TECHNIQUES, 2015 to 2015 (Thesis)
  • Journal of Mechanical Engineering and Technology (JMET), 2014 to 2014 (Article in Journal)
  • Materials research, 2014 (Article in Journal)
  • Journal of Engineering Manufacture, 2013 to 2014 (Article in Journal)
  • Academic/Technical Contribution
    (Activity),(Organisation),(Duration),(Role)
  • Panel Judge for 2020 Digital Healthcare Cluster Bootcamp, Collaborative Research in Engineering, Science and Technology Centre (CREST), 2020 - 2020
  • Ahli Mesyuarat 3D Printing untuk sektor perubatan Anjuran Kementerian Kesihatan Malaysia, Kementerian Kesihatan Malaysia dan Crest, 2020 - 2020 (Technical Advisor)
  • Panel penasihat program diploma teknologi pemesinan industri , Kolej Vokasional Sungai Buloh, 2020 - 2023 (Expert Advisor)
  • Penilai Geran Penyelidikan Fakulti (GPF) 2020, Fakulti Kejuruteraan, 2020 - 2020 (Advisor)
  • Consultancy on Design and Development for the innovation and technology of Solar Dryer product for SIRIP Food Industries Sdn. Bhd, AMMP Centre & Zecttron Sdn. Bhd, 2019 - 2019 (Technical Advisor)
  • Consultancy on Design And Development of Portable Handy Chiller Product for Bal Chiller Sdn. Bhd, Faculty of Engineering , 2018 - 2019 (Consulting Engineer/professional Engineer)
  • PELANTIKAN SEBAGAI JAWATANKUASA PENILAI PENGKOMERSILAN UM, UIVERSIT MALAYA & UMCIC, 2018 - 2020 (Jawatankuassa Penilai)
  • Panel Penilai bagi Permohonan Geran Prototaip UM KITAR-2018, University of Malaya, 2018 - 2018 (Panel Penilai)
  • Speaker for Research Grant Briefing: Prototype Research Grant Scheme (PRGS) & Long-Term Research Grant Scheme (LRGS), University of Malaya, 2018 - 2018 (Speaker)
  • Presenter 2nd Advanced Research in Engineering and Information Technology International Conference (AREITIC 2017), Malaysia Technical Scientist Association (MALTESAS), 2017 - 2017 (Presenter)
  • Session Chair 2nd Advanced Research in Engineering and Information Technology International Conference (AREITIC 2017), Malaysia Technical Scientist Association (MALTESAS), 2017 - 2017 (Session Chair)
  • PENILAI (REVIEWER) KERTAS PERSIDANGAN SEMPENA INTERNATIONAL TECHNICAL POSTGRADUATE CONFERENCE 2017 (TECHPOST 2017) PADA 5 HINGGA 6 APRIL 2017, INTERNATIONAL TECHNICAL POSTGRADUATE CONFERENCE 2017 (TECHPOST 2017), 2017 - 2017 (Reviewer)
  • Mentor untuk Pertandingan Inovasi, Beyond Engineering Innovation (BEGIN) Challenge Sesi 2016/2017, Fakulti Kejuruteraan, Universiti Malaya, 2017 - 2017 (Mentor)
  • LANTIKAN SEBAGAI PENGERUSI DAN PENILAI PEMBENTANGAN LISAN (PARALLEL SESSION) SEMPENA INTERNATIONAL TECHNICAL POSTGRADUATE CONFERENCE 2017 (TECHPOST 2017) PADA 5 HINGGA 6 APRIL 2017, INTERNATIONAL TECHNICAL POSTGRADUATE CONFERENCE 2017 (TECHPOST 2017), 2017 - 2017 (Chairman)
  • Mentor in Beyond Engineering Innovation (BEGIN) Challenge 2017, UNIVERSITY OF MALAYA, 2017 - 2017 (Mentor)
  • Organizing Committee of The 3rd International Conference on the Science & Engineering of Materials (ICoSEM 2017), University of Malaya, 2017 - 2017 (Organizing Committee)
  • Penyelidik bersama di bawah skim geran penyelidikan NIC (NRGS) bagi program: Developing Rural Entrepreneurship Model for Poverty Eradiction, Jabatan Pendidikan Tinggi, 2016 - 2017 (Researcher)
  • Jawatankuasa Buku Panduan Sesi 2016/2017, Fakulti Kejuruteraan, 2016 - 2017 (Committee Member)
  • Penyelia Program SiswaPreneur @ PPRN 2016/2017, University of Malaya Entrepreneurship Centre (UMEC) , 2016 - 2017 (Supervisor)
  • Pengerusi Jawatankuasa Minggu Haluansiswa Sesi 2016/2017, Jabatan Kejuruteraan Mekanik, Fakulti Kejuruteraan, 2016 - 2016 (Chairman)
  • Panel untuk Sesi Candidature Defence Ijazah Sarjana Institut Pengajian Siswazah Semester 1 Sesi 2016/2017, Institut Penhajian Siswazah, 2016 - 2016 (Panel)
  • APPOINTMENT AS CHAIRMAN 1 OF THE MALAYSIA-JAPAN INTERNATIONAL SYMPOSIUM ON TRIBOLOGY TECHNOLOGY (MYTRIBOS) 2016 - PART 1 , Malaysian Tribology Society (MYTRIBOS), 2016 - 2016 (Chairman)
  • PERODUA ECO-CHALLENGE 2017 (PEC 2017), PERODUA, 2016 - 2016 (Advisor)
  • Speaker at the Meet the Expert session during MOGSEC 2016, MOGSEC 2016, 2016 - 2016 (Speaker)
  • Beyond Engineering Challenge (BEGIN) Competition 2016, Kolej Kediaman Tuanku Bahiyah, University of Malaya, 2016 - 2016 (Mentor)
  • Technical Advisory Panel for KCEC/P 3172 Industrial Project in Session 2014/2015, Faculty of Engineering, UM, 2016 - 2016 (Technical Advisor)
  • Penyelaras Keusahawanan Fakulti-UMEC, University of Malaya Entrepreneurship Centre (UMEC), 2016 - 2018 (Coordinator)
  • Pencatat bagi Program Advokasi Ilmuwan Majlis Profesor Negara 2016, Centre for Energy Sciences, Faculty of Engineering, University of Malaya, 2016 - 2016 (Pencatat Program )
  • Penyelaras Program Ijazah Pertama bagi Sarjana Muda Kejuruteraan Mekanik (Pembuatan) Sesi 2016/2017, Jabatan Kejuruteraan Mekanik, Fakulti Kejuruteraan , 2016 - 2017 (Coordinator)
  • Penceramah Taklimat Skim Geran Penyelidikan FRGS, PRGS & TRGS, Universiti Malaya, 2016 - 2016 (Speaker)
  • Member of the Organizing Committee of International Conference on Advances in Materials and Processing Technologies (AMPT 2016), AMPT, FKUM, Centre of Advanced Materials University of Malaya, AMMP Centre, 2016 - 2016 (Organizing Committee)
  • Panel penasihat program diploma teknologi pemesinan industri, Kolej Vokasional Sungai Buloh, 2016 - 2016 (Expert Advisor)
  • Resource Person for The EAC Task Force - Entrepreneurship, Faculty of Engineering, University of Malaya , 2015 - 2015 (Resource Person)
  • Penyelaras Keusahawanan Fakulti-UMEC, Jabatan Kejuruteraan Mekanikal , 2015 - 2015 (Coordinator)
  • Training Autodesk Inventor for Basic and Intermediate to Lecturer of Vocational College, CNC Lab of Industrial Machining (Kolej Vokasional Sg Buloh), 2015 - 2015 (Trainer)
  • Trainer for the course of Introduction to CNC Controller Siemens to Lecturer of Sungai Buloh Vocational College, Workshop of Industrial Machining (Kolej Vokasional Sg Buloh), 2015 - 2015 (Trainer)
  • Marketing Materials and Online Presence, Sobena Offshore Inc Sdn Bhd, 2015 - 2015 (Marketing)
  • Mentor untuk Pertandingan Inovasi, Beyond Engineering Innovation (BEGIN) Challenge 2015/2016, Faculty of Engineering, 2015 - 2016 (Mentor)
  • Supervisor for 7th Industrial Design Seminar and Competition 2015 (7th INDISCO), 7th INDISCO, 2015 - 2015 (Supervisor)
  • Trainer for the course of Electric Die Sinking (EDM) Technology at Kolej Vokasional Sungai Buloh, Department of Mechanical Faculty of Engineering, University of Malaya, 2015 - 2015 (Trainer)
  • Committee member for 2nd International Conference on the Science and Engineering of Materials (ICoSEM 2015), Centre of Advanced Materials (CAM), UM, 2015 - 2015 (Committee Member)
  • Resource Person for The EAC Task Force - Economy and Finance, DEpartment of Mechanical Engineering, Faculty of Engineering, University of Malaya , 2015 - 2015 (Resource Person)
  • Mentor untuk program Beyond Engineering Innovation (BEGIN) Challenge 2015, Tuanku Bahiyah Residential College & Faculty of Engineering , 2015 - 2015 (Mentor)
  • RESOURCE PERSON BAGI KURSUS KEJURUTERAAN KEUSAHAWANAN DIBAWAH PEJABAT TIMBALAN DEKAN (IJAZAH DASAR), FAKULTI KEJURUTERAAN, FACULTY OF ENGINEERING, UNIVERSITY OF MALAYA , 2015 - 2015 (Resource Person)
  • Ahli Jawatankuasa Unit Kualiti Peringkat Jabatan Kejuruteraan Mekanik, Jabatan Kejuruteraan Mekanik, 2014 - 2014 (Committee Member)
  • AUN/SEED-NET REGIONAL CONFERENCE ON MATERIALS ENGINEERING 2014, Faculty of Engineering, University of Malaya , 2014 - 2014 (Committee Member)
  • APRU Provost Forum 2014, University of Malaya, 2014 - 2014 (Rappoteur)
  • Professional Seminar on Making the World-Class Rank Agents of Change in University's Ranking and Reputation, University of Malaya, 2013 - 2013 (Event Manager)
  • AWARD AND STEWARDSHIP
    (Name of Award/Stewardship),(Awarding Institution),(Year Awarded),(Type of Award)
    • Gold Award for The 4th World Invention Academic Conference (WIAC 2020)-Hybrid Mask Sterilizer , KOREA INVENTION NEWS, 2020
    • Gold Award for The 4th World Invention Academic Conference (WIAC 2020)-Solar Dryer for Halal-based Performance, KOREA INVENTION NEWS, 2020
    • Gold Award for Novel Powder-based Physical Vapor Deposition (PPVD) magnetron sputtering, International Conference and Exposition on Inventions by Institutions of Higher Learning 2019 (PECIPTA'19), 2019
    • EXCELLENCE SERVICE AWARD, University of Malaya, 2019
    • Liputan Media TV1 Selamat Pagi Malaysia berkenaan Penganjuran Pertandingan Catur Antarabangsa, TV1, 2018
    • Liputan Media Sinar Harian 'Gergaji jika diubah boleh jadi lain tau', Sinar Harian, 2018
    • Liputan Media Sinar Harian 'Inovasi pengering hasil laut guna tenaga solar', Sinar Harian, 2018
    • Liputan Media Bernama TV berkaitan Pelajar Universiti Memberikan Khidmat Masyarakat Kepada Golongan Asnaf, Bernama TV, 2018
    • Apparatus for dispensing liquid medication and method thereof - Anugerah Harta Intelek Negara 2018 Kategori Paten , Anugerah Harta Intelek Negara , 2018
    • Gold Award at International Conference and Exhibitions on Inventions by Institutions of Higher Learning (PECIPTA 2017) for Heart Public Access to Defibrillation (PAD) Mobile Automated External Defibrillator (AED), Institutions of Higher Learning, Malaysia, 2017
    • Gold Award at International Conference and Exhibitions on Inventions by Institutions of Higher Learning (PECIPTA 2017) for Automated Methadone Dispenser for Drug Addiction Treatment Program, Institutions of Higher Learning, Malaysia, 2017
    • Sijil Perkhidmatan Cemerlang Universiti Malaya, Universiti Malaya, 2017
    • ITEX 2017 SILVER MEDAL for "Heart Public Access to Defibrillation (PAD) Mobile Automated External Defibrillator (AED), MINISTRY OF SCIENCE, TECHNOLOGY AND INNOVATION & MALAYSIAN INNOVATION AND DESIGN SOCIETY, 2017
    • GOLD MEDAL - INTERNATIONAL INVENTION, INNOVATION & TECHNOLOGY EXHIBITION (ITEX 2017) "Automated Methadone Dispensing Machine with Integrated Secure Database System for Individualized MMT Program, MINISTRY OF SCIENCE, TECHNOLOGY AND INNOVATION & MALAYSIAN INNOVATION AND DESIGN SOCIETY, 2017
    • CERTIFICATE OF EXCELLENT SERVICE, University of Malaya, 2017
    • GOLD MEDAL, INTERNATIONAL INVENTION & INNOVATION EXHIBITION (ITEX) 2016 "Novel Technique to Fabricate High Aspect RatioMicro-Electrode for Producing Micro-Size Miniaturized Products", MALAYSIAN INVENTION AND DESIGN SOCIETY, 2016
    • Gold Medal, Invention & Innovation Awards 2016, Malaysia Technology Expo (MTE) 2016 "Development of a New CNC Gantry Machine with Double Motion Feed Drive System", Malaysian Association of Research Scientists, 2016
    • Silver Medal, Pecipta '15, for Computer Numerical Control (CNC) Lathe Machine, The International Conference and Exposition on Inventions by Institutions of Higher Learning, 2015
    • Silver Medal, Pecipta '15, for Automatic Thermocyclic Dipping Machine (ATDM), The International Conference and Exposition on Inventions by Institutions of Higher Learning, 2015
    • Silver Medal, ITEX 2015, for the product of CNC Lathe UMVL2.0, 26th International Invention & Innovation Exhibition, 2015
    • UM EXCELLENCE AWARD, NAIB CANSELOR, 2014
    • University of Malaya Excellence Award 2014 - PhD Graduate 2013 (4 Years or Less), University of Malaya, 2014
    • Silver Medal, Molybdenum Disulphide Nano Based-Lubricant for Improving Machining Process by More Power Saving and Less Oil Consumption and Pollution, 13th Malaysia International Technology Expo 2014, 2014
    • Gold Medal, An Inorganic Nano Base Lubrication System to be Used in Heavy Duty Industrial Machining , Malaysian Technology Expo (MTE 2013), 21-23 feb 2013, PWTC Kuala Lumpur., MIGHT, 2013
    • A Portable Computer Numerical Control Lathe. Anugerah Harta Intelek Negara 2013 (Kategori Paten), Anugerah Harta Intelek Negara, 2013
    • Best Student Paper Award of The 2012 International Conference of Manufacturing Engineering and Engineering Management (ICMEEM 2012), Surface Quality Improvement in CNC End Milling Machined Aerospace AL-2017-T4 Alloy using Carbon Onion Nanolubrication with DLC Cutting Tool , World Congress Engineering (WCE 2012), 4-6th July 2012, London, WCE 2012, 2012
    • Consolation Award - Engineering Invention & Innovation Exhibition, Newly Nanolubrication System in CNC Machining Processes for Better Product Quality, More Power Savings and Less Oil Consumption and Pollution, EINIX 2012., IEM, 2012
    • Broze Medal PECIPTA 2011, CNC Turning project, PECIPTA, 2011
    • Silver Medal 9th Malaysia Technology Expo 2010, Printing Kiosk Project, MIGHT, 2010
    • Silver Medal ITEX(International Technology Exibition Centre) 2009, Hajj Bracelet project, ITEX, 2009
    • Best Presenter Award, Industry Cluster, NSF conference 2008, MOSTI, 2008
    • Anugerah Permata Bersinar Angkatan Kejuruteraan Islam Universiti Malaya 2003/04, AKIUM, 2003
    • Anugerah Pelajar Bestari Pulau Pinang Matriculation College 2001, Kolej Matrikulasi Pulau Pinang, 2001
    CONSULTANCY PROJECT
    (Project title),(Organisation),(Duration),(Role),(Level)
    • EVALUATOR COMMITEE FOR EVALUATION IN INTELECTUAL PROPERTY FOR UMCIC, UMCIC, 01/07/2020 to 01/07/2023 (National)
    • 3D PRINTING FOR MEDICAL FIELD, INSTITUT KESIHATAN NEGARA, 01/03/2020 to 01/03/2020 (National)
    • Progress Presentation Session with Media-Perodua ECO Challenge 2017, Perodua, 01/10/2017 to 01/10/2017 (National)
    • Collaboration in developing downhole tools, particularly valves for drilling and completion., MIT Technologies, 01/12/2016 to 01/12/2016 (National)
    • Nano-Indentation of Silicon Wafer, Freescale Semiconductor, 01/12/2015 to 01/12/2015 (National)
    • POLYTAINER DRAWING AND GEOMETRY COMPARISON, Polytainer Industries Sdn Bhd, 01/06/2014 to 01/06/2014 (National)
    PAPER PRESENTED
    (Title),(Event),(Date Presented),(Organiser),(Level)
    INVITED SPEAKER
  • How to turn your FYP Report into as SCOPUS Indexed Journal, The 2nd Virtual Workshop : How to turn your FYP Report into as SCOPUS Indexed Journal, 02/12/2020 to 02/12/2020, CRIM & AMT UTeM (International)
  • 3D Printing for Medicine, Pharmacy Revolution 4.0, 11/03/2018 to 11/03/2018, Malaysian Community Pharmacy Guild (International)
  • ORAL PRESENTER
  • Methadone Dispenser for the Practice of Methadone Treatment Therapy in Malaysia, 3rd International Conference on Mechanical, Manufacturing and Process Plant Engineering (ICMMPE 2017), 22/11/2017 to 23/11/2017, Sigma Research & Consulting Sdn Bhd (International)
  • Analyzation of Performances of CNC High Speed Milling Machine Using MWCNT as Addictives in Cutting Fluid, 3rd International Conference on Mechanical, Manufacturing and Process Plant Engineering (ICMMPE 2017) , 22/11/2017 to 23/11/2017, Sigma Research & Consultation Sdn Bhd (International)
  • PRESENTER
  • Overcoming Drug Addictions By Automated Methadone Dispenser Machine for Methadone Maintenance Treatment Program, International Conference of Universiti Malaya Academia-Community Engagement (UMACE) 2019, 30/09/2019 to 01/10/2019, UMCARES (International)
  • PRODUCT DESIGN AND ITS APPLICATION IN RESEARCH, ERASMUS + INTERNATIONAL CREDIT MOBILITY (ICM) PROGRAMME , 08/04/2019 to 12/04/2019, ERASMUS+ INSTITUTIONAL  (International)
  • Development of Water Sampler for Efficiency and Low Cost Maintenance, Regional Conference on Mechanical and Manufacturing Engineering, 05/11/2015 to 06/11/2015, Mechanical Engineering, Faculty of Engineering, Universitas Gadjah Mada (International)
  • Investigation of the Possibility of Using Silicon Dioxide (SiO2)Nanolubrication in Precision Grinding of Titanium Alloy, Tokyo International Conference on Engineering and Applied Sciences (TICEAS 2014), 16/12/2014 to 18/12/2014, Ticeas 2014 (International)
  • Analysis of Fourier and Non-Fourier Heat Conduction using Tiknonov based Well-Conditioned Asymptotic Waveform Evaluation Technique, 3rd International Conference on Computer Engineering and Mathematical Sciences (ICCEMS 2014), 04/12/2014 to 05/12/2014, Science and Knowledge Research Society (International)
  • An implementation of silicon dioxide (SiO2) nanolubrication in precision grinding process, Research Talk, 14/11/2014 to 14/11/2014, Department of Mechanical Engineering, Uni (University)
  • PARETO Anova of nanolubrication performance for the different level of control factors during grinding process, AUN/SEED-Net Regional Conference on Materials Engineering, 11/11/2014 to 12/11/2014, AUN/SEED Net Jica, University of Malaya, JWRI, AMMP Centre (International)
  • The effect of silicon dioxide (SiO2) nanolubrication in grinding of Titanium alloy towards grinding force, AUN/SEED-Net Regional Conference on Materials Engineering, 11/11/2014 to 12/11/2014, AUN/SEED Net Jica, University of Malaya, JWRI, AMMP Centre (International)
  • Investigate the machining performance of AISI304 stainless steel using thin pulse jet and fluid atomizer minimal quantity lubrication systems, International Conference on Machine Learning, Electrical and Mechanical Engineering (ICMLEME'2014), Jan. 8-9, 2014, Dubai (UAE). , 01/06/2014
  • Investigate the Possibility of Using Carbon Onion Nanolubrication with DLC Cutting Tool for Lower Machining Power Consumption, International Conference on Advances in Mechanical and Automation Engineering- MAE 2014, 01/06/2014
  • Development of SiO2 Nanolubrication System for better surface Quality, More Power Savings and Less Oil Consumption in Hard Turning of Hardened Steel AISI4140, The 2013 4th International Conference on Material and Manufacturing Technology (ICMMT 2013), 01/06/2013
  • Surface Quality Improvement in CNC End Milling of Aerospace AL-2017-T4 Alloy using Carbon Onion Nanolubrication with DLC Cutting Tool, July 4-6, World Congress Engineering 2012 (WCE 2012) , 04/07/2012 to 06/07/2012 (International)
  • An investigation of onion like carbon lubrication performance for cutting force in end milling process, 3rd Multidisciplinary International Student Workshop, August 4-5, 2011, (MISW 2011) , 04/08/2011 to 05/08/2011 (International)
  • OTHERS
  • Renewable Energy Harvesting For Wireless Sensors Using Passive Rfid Tag Technology, International Conference on the Science and Engineering of Materials 2015 (ICoSEM 2015), 16/11/2015 to 18/11/2015, Centre of Advanced Materials (CAM) (International)
  • Optimized Design of a Hybrid PV-Wind-Diesel System with Improved Power Quality, International Conference on the Science and Engineering of Materials 2015 (ICoSEM 2015), 16/11/2015 to 18/11/2015, Centre of Advanced Materials (CAM) (International)