Curriculum Vitae

DR. MASOUD SARRAF

Lecturer
  • Deputy Vice-Chancellor (Research and Innovation) Office
  • masoudsarraf

AREAS OF EXPERTISE

  • SURFACE ENGINEERING SN: INCLUDING STANDARD SUPPORTING TECHNOLOGIES IN SURFACE TREATMENT AND WELDING TECHNOLOGIES
    Nanostructured coatings
  • CORROSION SCIENCE AND ENGINEERING
  • NANO MATERIALS

ACADEMIC QUALIFICATION

  • Doctoral Degree (PhD), (Advanced Material)
    Universiti Malaya (UM)
  • MASTER DEGREE, (Mechanical Engineering)
    Universiti Malaya (UM)
  • Bachelor Degree, (Mechanical Engineering)
    Islamic Azad University, Iran

MEMBERSHIPS

  • CERTIFICATE OF REGISTRATION OF GRADUATE ENGINEER (BEM), MEMBER
    Since 2018 (National)

PUBLICATIONS

Article in Journal
WoS
  1. Musharavati, Farayi; Jaber, Fadi; Nasor, Mohamed; Sarraf, Masoud; Nezhad, Erfan Zal; Uzun, Kaan; Ma, Ye; Bae, Sungchul; Singh, Ramesh; Chowdhury, Muhammad E. H. (2023). Micromechanical properties of hydroxyapatite nanocomposites reinforced with CNTs and ZrO2, CERAMICS INTERNATIONAL. 49(5), 7466-7475. doi:10.1016/j.ceramint.2022.10.218
  2. Sarraf, Masoud; Razak, Bushroa Abdul; Ghasemi, Majid; Nezhad, Erfan Zal; Hashemi, Ramin; Bae, Sungchul (2023). Systematic microstructure modification effect on nanomechanical, tribology, corrosion, and biomineralization behavior by optimized anodic alumina nanotubes coated Ti-6Al-4V alloy, CERAMICS INTERNATIONAL. 49(14), 23437-23455. doi:10.1016/j.ceramint.2023.04.176
  3. Sarraf, Masoud; Razak, Bushroa Abdul; Musharavati, Farayi; Ibrahim, Mahmoud Z.; Hashemi, Ramin; Chowdhury, Muhammad E. H. (2023). Structural, cell culture, antibacterial and in vitro bioactivity analysis of highly-ordered Al2O3 nanotube coating with decorated Ag2O nanoparticles on Ti-6Al-4V, SURFACES AND INTERFACES. 42. doi:10.1016/j.surfin.2023.103328
  4. Ashrafi, N., Ariff, A. H. M., Sarraf, M., Sulaiman, S., & Hong, T. S. (2021). Microstructural, thermal, electrical, and magnetic properties of optimized Fe3O4-SiC hybrid nano filler reinforced aluminium matrix composite. Materials Chemistry and Physics, 258, 14. doi: 10.1016/j.matchemphys.2020.123895
  5. Sarraf, M., Nasiri-Tabrizi, B., Yeong, C. H., Hosseini, H. R. M., Saber-Samandari, S., Basirun, W. J., & Tsuzuki, T. (2021). Mixed oxide nanotubes in nanomedicine: A dead-end or a bridge to the future? Ceramics International, 47(3), 2917-2948. doi: 10.1016/j.ceramint.2020.09.177
  6. Zac, C. H., Bushroa, A. R., Sarraf, M., Rizwan, M., & Jamaludin, M. F. (2021). Electrophoretic deposition of bioglass reinforced zirconia for biomedical applicationElektrophoretische Abscheidung von mit Bioglas verstarktem Zirkon fur biomedizinische Anwendungen. Materialwissenschaft und Werkstofftechnik, 52(9), 952-964. doi: 10.1002/mawe.202000091
  7. Ashrafi, N., Hanim, M. A. A., Sarraf, M., Sulaiman, S., & Hong, T. S. (2020). Microstructural, Tribology and Corrosion Properties of Optimized Fe3O4-SiC Reinforced Aluminum Matrix Hybrid Nano Filler Composite Fabricated through Powder Metallurgy Method. Materials, 13(18), 18. doi: 10.3390/ma13184090
  8. Mesbah, M., Sarraf, M., Dabbagh, A., Nasiri-Tabrizi, B., Paria, S., Banihashemian, S. M., . . . Hosseini, H. R. M. (2020). Synergistic enhancement of photocatalytic antibacterial effects in high-strength aluminum/TiO2 nanoarchitectures. Ceramics International, 46(15), 24267-24280. doi: 10.1016/j.ceramint.2020.06.207
  9. Sarraf, M., Nasiri-Tabrizi, B., Dabbagh, A., Basirun, W. J., Sukiman, N. L. (2020). Optimized nanoporous alumina coating on AA3003-H14 aluminum alloy with enhanced tribo-corrosion performance in palm oil. Ceramics International, 46(6), 7306-7323. doi: 10.1016/j.ceramint.2019.11.227
  10. Subri, N. W. B., Sarraf, M., Nasiri-Tabrizi, B., Ali, B., Sabri, M. F. M., Basirun, W. J., Sukiman, N. L. (2020). Corrosion insight of iron and bismuth added Sn-1Ag-0.5Cu lead-free solder alloy. Corrosion Engineering Science and Technology, 55(1), 35-47. doi: 10.1080/1478422x.2019.1666458
  11. Dabbagh, A., Hedayatnasab, Z., Karimian, H., Sarraf, M., Yeong, C. H., Hosseini, H. R. M., . . . Rahman, N. A. (2019). Polyethylene glycol-coated porous magnetic nanoparticles for targeted delivery of chemotherapeutics under magnetic hyperthermia condition. International Journal of Hyperthermia, 36(1), 104-114. doi:10.1080/02656736.2018.1536809
  12. Sarraf, M., Sukiman, N. L., Bushroa, A. R., Nasiri-Tabrizi, B., Dabbagh, A., Abu Kasim, N. H., Basirun, W. J. (2019). In vitro bioactivity and corrosion resistance enhancement of Ti-6Al-4V by highly ordered TiO2 nanotube arrays. Journal of the Australian Ceramic Society, 55(1), 187-200. doi:10.1007/s41779-018-0224-1
  13. Sarraf, M., Razak, B. A., Nasiri-Tabrizi, B., Dabbagh, A., Abu Kasim, N. H., Basirun, W. J., Bin Sulaiman, E. (2017). Nanomechanical properties, wear resistance and in-vitro characterization of Ta2O5 nanotubes coating on biomedical grade Ti-6Al-4V. Journal of the Mechanical Behavior of Biomedical Materials, 66, 159-171.
  14. Sarraf, Masoud; Razak, Bushroa Abdul; Nasiri-Tabrizi, Bahman; Dabbagh, Ali; Abu Kasim, Noor Hayaty; Basirun, Wan Jefrey; Bin Sulaiman, Eshamsul (2017). Nanomechanical properties, wear resistance and in-vitro characterization of Ta2O5 nanotubes coating on biomedical grade Ti-6Al-4V, JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS. 66, 159-171. doi:10.1016/j.jmbbm.2016.11.012
  15. Esfe, M. H., Yan, W. M., Afrand, M., Sarraf, M., Toghraie, D., Dahari, M. (2016). Estimation of thermal conductivity of Al2O3/water (40%)-ethylene glycol (60%) by artificial neural network and correlation using experimental data, International Communications in Heat and Mass Transfer. 74(125-128), Article
  16. Sarraf, M., Razak, B. A., Dabbagh, A., Nasiri-Tabrizi, B., Abu Kasim, N. H., Basirun, W. J. (2016). Optimizing PVD conditions for electrochemical anodization growth of well-adherent Ta2O5 nanotubes on Ti-6Al-4V alloy, Rsc Advances. 6(8278999-79015), Article
  17. Zalnezhad, E., Maleki, E., Banihashemian, S. M., Park, J. W., Kim, Y. B., Sarraf, M., Sarhan, A., Ramesh, S. (2016). Wettability, structural and optical properties investigation of TiO2 nanotubular arrays, Materials Research Bulletin. 78(179-185), Article
  18. Rafieerad, A. R., Bushroa, A. R., Zalnezhad, E., Sarraf, M., Basirun, W. J., Baradaran, S., Nasiri-Tabrizi, B. (2015). Microstructural development and corrosion behavior of self-organized TiO2 nanotubes coated on Ti-6Al-7Nb, Ceramics International. 41(910844-10855), Article
  19. Rafieerad, A. R., Zalnezhad, E., Bushroa, A. R., Hamouda, A. M. S., Sarraf, M., Nasiri-Tabrizi, B. (2015). Self-organized TiO2 nanotube layer on Ti-6Al-7Nb for biomedical application, Surface Coatings Technology. 265, 24-31
  20. Sarraf, M., Zalnezhad, E., Bushroa, A. R., Hamouda, A. M. S., Rafieerad, A. R., Nasiri-Tabrizi, B. (2015). Effect of microstructural evolution on wettability and tribological behavior of TiO2 nanotubular arrays coated on Ti-6Al-4V, Ceramics International. 41(6), 7952-7962
  21. Mahfuz, M. H., Kamyar, A., Afshar, O., Sarraf, M., Anisur, M. R., Kibria, M. A., Saidur, R., Metselaar, I. (2014). Exergetic analysis of a solar thermal power system with PCM storage, Energy Conversion and Management. 78, 486-492
  22. Nasiri-Tabrizi, B., Zalnezhad, E., Hamouda, A. M. S., Basirun, W. J., Pingguan-Murphy, B., Fahami, A., Sarraf, M., Rafieerad, A. R. (2014). Gradual mechanochemical reaction to produce carbonate doped fluorapatite-titania composite nanopowder, Ceramics International. 40(10), 15623-15631
  23. Sarraf, M., Zalnezhad, E., Bushroa, A. R., Hamouda, A. M. S., Baradaran, S., Nasiri-Tabrizi, B., Rafieerad, A. R. (2014). Structural and mechanical characterization of Al/Al2O3 nanotube thin film on TiV alloy, Applied Surface Science. 321, 511-519
  24. Javadi, F. S., Rismanchi, B., Sarraf, M., Afshar, O., Saidur, R., Ping, H. W., Rahim, N. A. (2013). Global policy of rural electrification, Renewable Sustainable Energy Reviews. 19, 402-416
  25. Sarraf, M., Rismanchi, B., Saidur, R., Ping, H. W., Rahim, N. A. (2013). Renewable energy policies for sustainable development in Cambodia, Renewable Sustainable Energy Reviews. 22, 223-229
Scopus
  1. Sarraf M., Musharavati F., Jaber F., Bushroa A.R., Zalnezhad E., Nasor M., Bae S., Chowdhury M., Dabbagh A. (2024). Anodization and nonstructural surface characterizations of fabricated Ti 29Nb 13Ta 7.1Zr alloy for biomedical applications and its mechanical, wettability, tribological, and corrosion properties, Materials Chemistry and Physics. 314. doi:10.1016/j.matchemphys.2023.128825
Others
  1. Erfan Zal Nezhad, Masoud Sarraf, Farayi Musharavati, Fadi Jaber, JI Wang, Nazatul Liana Sukiman, Sungchul Bae, Muhammad Chowdhury, Hongyun So Effect of Zirconia Nanotube Coating on the Hydrophilicity and Mechano-chemical Behavior of Zirconium for Biomedical Applications Surfaces and Interfaces, (2021),
  2. Farayi Musharavati, Fadi Jaber, Mohamed Nasor, Masoud Sarraf, Erfan Zal Nezhad, Kaan Uzun, Ye Ma, Sungchul Bae, Ramesh Singh, Muhammad Chowdhury(2022) Micromechanical properties of hydroxyapatite nanocomposites reinforced with CNTs and ZrO2, Ceramics International
  3. Negin Ashrafi, Azmah Hanim Mohamed Ariff, Dong-Won Jung, Masoud Sarraf, Javad Foroughi, Shamsuddin Sulaiman, Tang Sai Hong (2022). Magnetic, Electrical, and Physical Properties Evolution in Fe3O4 Nanofiller Reinforced Aluminium Matrix Composite Produced by Powder Metallurgy Method. Materials, 15(12), 4153.
  4. Masoud Sarraf, Erfan Rezvani Ghomi, Saeid Alipour, Seeram Ramakrishna, Nazatul Liana Sukiman A State-of-the-Art Review on Fabrication and Characteristics of Titanium and Its Alloys for Biomedical Applications Bio-Design and Manufacturing, (2021)),
  5. Masoud Sarraf, Ali Dabbagh, Bushroa Abdul Razak, Bahman Nasiri-Tabrizi, Hamid Reza Madaah Hosseini, Saeed Saber-Samandari, Noor Hayaty Abu Kasim, Lum Kah Yean, Nazatul Liana Sukiman, (2018) Silver oxide nanoparticles-decorated tantala nanotubes for enhanced antibacterial activity and osseointegration of Ti6Al4V , Materials & Design,154, 28-40
  6. Masoud Sarraf, Ali Dabbagh, Bushroa Abdul Razak, Reza Mahmoodian, et al. (2018). Highly-ordered TiO2 nanotubes decorated with Ag2O nanoparticles for improved biofunctionality of Ti6Al4V, Surface and Coatings Technology, https://doi.org/10.1016/j.surfcoat.2018.06.054
  7. Masoud Sarraf, Bushroa Abdul Razaka, Bahman Nasiri-Tabrizie, Ali Dabbagha, Noor Hayaty Abu Kasim, Wan Jefrey Basirung, Eshamsul Bin Sulaiman. Nanomechanical properties, wear resistance and in-vitro characterization of Ta2O5 nanotubes coating on biomedical grade Ti 6Al 4V Journal of the mechanical behavior of biomedical materials 66 (2017) 159 171
  8. Sarraf, M; Razak, BA; Crum, R; Gamez, C; Ramirez, B; Abu Kasim, NHB; Nasiri-Tabrizi, B; Gupta, V; Sukiman, NL; Basirun, WJ 2017. Adhesion measurement of highly-ordered TiO2 nanotubes on Ti-6Al-4V alloy. PROCESSING AND APPLICATION OF CERAMICS
  9. Sarraf M., Bushroa A.R., Dabbagh A., Nasiri-Tabrizi B., Abu Kasim N.H., Jefrey W.B. 2016. Optimizing PVD conditions for electrochemical anodization growth of well-adherent Ta2O5 nanotubes on Ti-6Al-4V alloy. RSC Advances 6(82): 78999-79015.

RESEARCH PROJECT

National
  1. 2023 - 2024, Government Agency
    Physico-chemical Properties Of Tin Dioxide Nano Films For Antifogging And Self-cleaning Applications ( Co-Researcher)
  2. 2019 - 2022, RU Geran - Fakulti Program
    Towards The Development Of Improved Tribocorrosion Performance Of Aluminium Alloys Via Surface Modification ( Co-Researcher)

ACADEMIC/PROF. SERVICES

Evaluation
  1. (2023) Reviewer for Effect of Anodization and Heat Treatments, in Air or in Vacuum Conditions, On The Corrosion Resistance of Cp-Ti and Ti6al4v, International, (External Evaluator)
  2. (2023) Reviewer for Advances and Significances of Titanium Dental Implant Applications, International, (Reviewer)
  3. (2023) Reviewer for Fabrication and Characterization of Nanoplate Oxide Layer On Aisi 316l Via Anodization for Biomedical Applications, International, (Reviewer)
  4. (2023) Reviewer for Cu/Ha/Zns/Peek Multicomponent Coatings With Varied Copper Content for Biomedical Applications, International, (Reviewer)
  5. (2022) 1st International Conference of Innovative Design, Manufacturing and Materials Technology (Icidmmt ’22), National, (Reviewer)
Contribution to external organisation
  1. (2023) Resource Person for The Research Paper Published in Wos Q1 Isi Entitled "Systematic Microstructure Modification Effect On Nanomechanical, Tribology, Corrosion, and Biomineralization Behavior by Optimized Anodic Alumina Nanotubes Coated Ti–6al–4v Alloy" The Research Paper Published in Wos Q1 Isi Entitled "Structural, Cell Culture, Antibacterial and in Vitro Bioactivity Analysis of Highly-Ordered Al2o3 Nanotube Coating With Decorated Ag2o Nanoparticles On Ti-6al-4v" The Research Paper Published in Wos Q1 Isi Entitled "Anodization and Nonstructural Surface Characterizations of Fabricated Ti–29nb–13ta–7.1zr Alloy for Biomedical Applications and Its Mechanical, Wettability, Tribological, and Corrosion Properties", International, (Resource Person)
  2. (2023) Resource Person for The Research Paper Published in Wos Q1 Isi Entitled "Systematic Microstructure Modification Effect On Nanomechanical, Tribology, Corrosion, and Biomineralization Behavior by Optimized Anodic Alumina Nanotubes Coated Ti–6al–4v Alloy" The Research Paper Published in Wos Q1 Isi Entitled "Structural, Cell Culture, Antibacterial and in Vitro Bioactivity Analysis of Highly-Ordered Al2o3 Nanotube Coating With Decorated Ag2o Nanoparticles On Ti-6al-4v", International, (Resource Person)
  3. (2023) Resource Person for The Research Paper Published in Wos Q1 Isi Entitled "Systematic Microstructure Modification Effect On Nanomechanical, Tribology, Corrosion, and Biomineralization Behavior by Optimized Anodic Alumina Nanotubes Coated Ti–6al–4v Alloy", International, (Resource Person)
  4. (2023) Resource Person for The Research Project Titled "Revision Surgery Retardation for Total Hip Replacement (Thr)", International, (Resource Person)
  5. (2022) Resource Person for The Research Paper Published in Wos Q1 Isi Entitled "Systematic Microstructure Modification Effect On Nanomechanical, Tribology, Corrosion, and Biomineralization Behavior by Optimized Anodic Alumina Nanotubes Coated Ti–6al–4v Alloy" The Research Paper Published in Wos Q1 Isi Entitled "Structural, Cell Culture, Antibacterial and in Vitro Bioactivity Analysis of Highly-Ordered Al2o3 Nanotube Coating With Decorated Ag2o Nanoparticles On Ti-6al-4v"The Research Paper Published in Wos Q1 Isi Entitled "Micromechanical Properties of Hydroxyapatite Nanocomposites Reinforced With Cnts and Zro2", International, (Resource Person)
  6. (2022) Contribution to The Research Paper Published in Wos Q1 Isi Entitled "Magnetic, Electrical, and Physical Properties Evolution in Fe3o4 Nanofiller Reinforced Aluminium Matrix Composite Produced by Powder Metallurgy Method", National, (Expert Advisor)

SUPERVISION

Under Graduate Students
  1. (2023) Towards Responsible Consumption and Environmental Impact due to Advance Surface Treatment of A70-Series
  2. (2023) Integrating Sensors to Plasma Electrolytic Oxidation Machine for Metal Coating-Integrated Design Project (IDP)
  3. (2023) Anodization of A-70 Series Aluminium Alloy by Eco-Friendly Electrolyte for Aerospace Application

TEACHING

Bachelor
  1. (2023) KIG2008 - Manufacturing Technology

COURSE ATTENDED

Internal / External Course
INTERNAL COURSE- ORGANIZED BY PTJ
  1. EMERALD TEACHING AND LEARNING 2023, Universiti Malaya (20 Feb 2023 - 24 Feb 2023)