Curriculum Vitae

ASSOCIATE PROF. IR. DR. MAHIDZAL BIN DAHARI

Associate Professor
  • Department of Electrical Engineering
    Faculty of Engineering
  • mahidzal
  • 0379677659
  • 0133599300

BIOGRAPHY


Dr. Mahidzal Dahari is currently Associate Professor in Department of Electrical Engineering, Faculty of Engineering, UM. He is an established academician and a practicing engineer. He has to-date published more than 100 articles in journals and conference proceedings both locally and internationally. His research interest includes instrumentation, automation, robotics and control strategy especially related to manufacturing technology, industrial robots and oil & gas applications. He has supervised more than 50 totals PhD and Masters Students. Dr. Mahidzal is actively involved in many consultancy projects, especially in the field of fluid flow, natural gas and also hydrogen technology. Dr. Mahidzal is a Member of BEM & IEM, Malaysia, and also a Member of IEEE, USA and Chartered Engineer from IET, UK.

 

AREAS OF EXPERTISE


  • ELECTRICAL AND ELECTRONIC INSTRUMENTATION
    Engineering, Electrical And Electronic Engineering, Control And Instrumentation Engineering
  • CONTROL OPTIMIZATION ALGORITHM
    Engineering, Electrical And Electronic Engineering, Control And Instrumentation Engineering
  • CONTROL SYSTEM DESIGN AND ALGORITHM
    Engineering, Electrical And Electronic Engineering, Control And Instrumentation Engineering
  • HYDROGEN STORAGE MATERIALS
    Applied Science And Technology, Material Sciences And Technology Including Engineering Materials, Energy Materials
  • HYDROGEN GENERATION MATERIALS
    Applied Science And Technology, Material Sciences And Technology Including Engineering Materials, Energy Materials
  • ENERGY EFFICIENCY
    Environment Sustainability, Conservation And Replacement
  • RENEWABLE RESOURCES
    Environment Sustainability, Conservation And Replacement

ACADEMIC QUALIFICATION


  • PhD ( Electrical and Electronic Engineering), (Instrumentation and Control)
    Universiti Teknologi Petronas (Utp)
  • MSc (Electrical and Electronic Engineering), (Instrumentation and Control)
    Universiti Teknologi Petronas (Utp)
  • BEng (Hons)(Electrical & Electronics), (Computer System)
    Universiti Teknologi Petronas (Utp)
  • AAD (Electronics Engineering), (Electronics)
    MARA

ADMINISTRATIVE DUTIES


  • Penyelaras Seminar Thesis Ijazah Tinggi
    19 Aug 2024 - 31 Dec 2026 (Department of Electrical Engineering, Faculty of Engineering)
  • Penyelaras Ijazah Tinggi
    01 Aug 2024 - 31 Dec 2026 (Department of Electrical Engineering, Faculty of Engineering)
  • Supervisor
    10 Jul 2024 - 29 Sep 2024 (Department of Electrical Engineering, Faculty of Engineering)
  • Supervisor
    10 Jul 2024 - 29 Sep 2024 (Department of Electrical Engineering, Faculty of Engineering)
  • Supervisor
    10 Jul 2024 - 29 Sep 2024 (Department of Electrical Engineering, Faculty of Engineering)
  • Project Member
    24 Jul 2024 - 24 Jul 2024 (Department of Electrical Engineering, Faculty of Engineering)
  • Penyelaras dan Wakil Perantara UMEXPERT
    01 Oct 2023 - 30 Jun 2024 (Department of Electrical Engineering, Faculty of Engineering)
  • Task Force Member
    01 Jan 2022 - 31 Dec 2022 (Department of Electrical Engineering, Faculty of Engineering)
  • Jawatankuasa Keselamatan dan Kesihatan Pekerjaan (JKKP)
    25 Nov 2021 - 25 Nov 2021 (Department of Electrical Engineering, Faculty of Engineering)
  • AJK-Pemeriksa Jabatan-Ijazah Dasar
    31 Aug 2019 - 31 Aug 2021 (Department of Electrical Engineering, Faculty of Engineering)
  • Coordinator
    31 Aug 2019 - 31 Aug 2021 (Department of Electrical Engineering, Faculty of Engineering)
  • Chairman
    21 Jun 2021 - 21 Jun 2021 (University Malaya)
  • Penilai Geran Penyelidikan Fakulti - (GPF) 2020
    17 Aug 2020 - 31 Dec 2020 (Department of Electrical Engineering, Faculty of Engineering)
  • AJK-Keselamatan dan Kesihatan Pekerjaan (JKKP)
    10 Sep 2020 - 31 Dec 2020 (Faculty)
  • Penilai Penyelidikan FRGS 2020
    09 Mar 2020 - 16 Dec 2020 (University Malaya)
  • Panel Penilai FRGS for IPPP 2019
    08 Jul 2019 - 08 Jul 2020 (University Malaya)
  • Panel Penilai Proposal Penyelidikan GPF 2019
    20 Jun 2019 - 20 Jun 2020 (Department of Electrical Engineering, Faculty of Engineering)
  • Penilai UM Covid-19 Related Special Research Grant 2020-2021 (UMCSRG)_S&T
    12 Jun 2020 - 19 Jun 2020 (University Malaya)
  • Panel Penilai Proposal Penyelidikan FRGS 2019
    22 Feb 2019 - 22 Feb 2020 (Department of Electrical Engineering, Faculty of Engineering)
  • Supervisor
    06 Aug 2019 - 31 Dec 2019 (Department of Electrical Engineering, Faculty of Engineering)
  • Programme Coordinator
    02 Jan 2018 - 31 Dec 2018 (Department of Electrical Engineering, Faculty of Engineering)
  • Supervisor
    01 Aug 2018 - 31 Aug 2018 (Department of Electrical Engineering, Faculty of Engineering)
  • Academic Advisor
    20 Sep 2017 - 31 Dec 2017 (Department of Electrical Engineering, Faculty of Engineering)
  • AJK Peperiksaan Jabatan
    22 May 2017 - 31 Dec 2017 (Department of Electrical Engineering, Faculty of Engineering)
  • Industrial Training Supervisor 2016/2017
    31 Jul 2017 - 31 Dec 2017 (Department of Electrical Engineering, Faculty of Engineering)
  • Panel Penilai Persidangan Kebangsaan Staf Kumpulan Professional & Pelaksana Universiti-Universiti Dalam Kejuruteraan 2017
    02 Aug 2017 - 02 Aug 2017 (National)
  • Penilai International Technical Postgraduate Conference 2017 (TechPost 2017)
    05 Apr 2017 - 06 Apr 2017 (International)
  • Programme Coordinator
    01 Jan 2013 - 31 Dec 2013 (University Malaya)
  • Acting Head of Department
    01 Jan 2013 - 31 Dec 2013 (University Malaya)
  • Programme Coordinator
    20 Dec 2013 - 20 Dec 2013 (University Malaya)
  • PEGAWAI PENGIRING AUDITOR SIRIM 2013
    11 Nov 2013 - 15 Nov 2013 (National)
  • Audit Program Pascaijazah Universiti Malaya-2013
    23 Oct 2013 - 23 Oct 2013 (University Malaya)
  • Chief Auditor
    26 Apr 2013 - 26 Apr 2013 (University Malaya)
  • PENEMUDUGA PRORGRAM PENGAJIAN IJAZAH DASAR DAN ASASI - SESI 2013/2014- Universiti Malaya
    28 Mar 2013 - 28 Mar 2013 (University Malaya)

MEMBERSHIPS


  • BEM PROFESSIONAL ENGINEERS, MEMBER
    2024 to 2024 (National)
  • MEMBER OF THE INSTITUTION OF ENGINEERING AND TECHNOLOGY UK, MEMBER
    2024 to 2024 (International)
  • IEEE MEMBERSHIP, MEMBER
    2024 to 2024 (International)
  • IEM MEMBER, MEMBER
    2024 to 2024 (National)
  • AHLI BERSEKUTU MAJLIS PROFESSOR NEGARA, MEMBER
    2022 to 2023 (National)
  • IET(UK), MEMBER
    2022 to 2022 (International)
  • IEM (MALAYSIA), MEMBER
    2022 to 2022 (National)
  • BEM, MEMBER
    2022 to 2022 (National)
  • IEEE, MEMBER
    2022 to 2022 (International)
  • BEM (MALAYSIA), PROFESSIONAL ENGINEER
    2021 to 2021 (National)
  • IEEE , MEMBER
    2021 to 2021 (International)
  • IET (UK), CHARTERED ENGINEER
    2021 to 2021 (International)
  • IEM (MALAYSIA), MEMBER
    2021 to 2021 (National)
  • MEMBER, MEMBER
    2021 to 2021 (International)
  • MEMBER, CHARTERED ENGINEER
    2021 to 2021 (International)
  • MEMBER, PROFESSIONAL ENGINEER
    2021 to 2021 (National)
  • MEMBER, MEMBER
    2021 to 2021 (National)

AWARD AND STEWARDSHIP


  • Top 2% Scientists in Stanford's Global 2024
    2024, Standford's Global 2024,  (International)
  • World's Top2% Scientist 2022 by Stanford University
    2022, Stanford University,  (International)
  • Certificate of Participation
    2022, IEEE,  (National)
  • Bronze Award Winner
    2022, PECIPTA2022,  (National)
  • James Dyson Foundation (Jdf) Bursary 2022
    2022, The James Dyson Foundation,  (National)
  • Best Final Year Project 2022
    2022, IET,  (National)
  • Certificate of Reviewing
    2020, The Editors of Journal of King Saud University,  (International)
  • Certificate of Reviewing
    2020, The Editors of Applied Energy ,  (International)
  • World Top 2% Scientist by Stanford University
    2020, Stanford University,  (International)
  • Silver Award At The International Automation and Control Enhancing Innovation Competition (Aceic) 2019
    2019, The Institution of Engineering and Technology (IET),  (International)
  • Web of Science (Wos) Highly Cited Research Award 2019
    2019, Web Of Science,  (International)
  • Ijhe Juan Carlos Bolcich Award
    2018, Institute Journal of Hydrogen Energy ,  (International)
  • Yayasan Utp-Fundamental Research Grant (Yutp-Frg)
    2017, Universiti Teknologi PETRONAS,  (National)
  • External Judges in The 39th Science & Engineering Design Exhibition (Sedex39)
    2017, Universiti Teknologi PETRONAS,  (National)
  • Certificate of Excellent Service
    2017, Universiti Malaya
  • Raja Tan Sri Ir.Zainal Prize
    2010, The Institution of Engineers, Malaysia,  (National)

PUBLICATIONS


Article in Journal
WoS
  1. Bouzgarrou, Souhail Mohammed; Farouk, Naeim; Abed, Azher M.; Khalil, Sana A.; Dahari, Mahidzal; Abdullaev, Sherzod; Alhomayani, Fahad M.; Mahariq, Ibrahim; Alharbi, Fawaz S.; Islam, Saiful (2024). Harnessing the power of waste in a poly-output system transforming biomass feedstocks into sustainable Bio-H2, O2, electricity, and heating, PROCESS SAFETY AND ENVIRONMENTAL PROTECTION. 188, 177-192. doi:10.1016/j.psep.2024.05.110
  2. Duan, Peng; Abed, Azher M.; Chaturvedi, Rishabh; Ahmad, Sayed Fayaz; Absalamov, Tolib; Dahari, Mahidzal; Fouad, Yasser (2024). Heat absorption/release efficiency betterment of phase change material inside a shell-and-tube latent heat storage system under six different conditions of tube and fins, JOURNAL OF ENERGY STORAGE. 90. doi:10.1016/j.est.2024.111880
  3. Fei, Zhongjie; Alghassab, Mohammed A.; Singh, Pradeep Kumar; Abdullaeva, Barno Sayfutdinovna; Dahari, Mahidzal; Abouzied, Amr S.; Albaijan, Ibrahim; Alotaibi, Hadil faris; Alrawashdeh, Albara Ibrahim; Alhadrawi, Merwa (2024). High-Efficient photocatalytic degradation of Levofloxacin via a novel ternary Fe 2 O 3 /CeO 2 /ZnO Heterostructure: Synthesis Optimization, Characterization, toxicity assessment and mechanism insight, CHEMICAL ENGINEERING JOURNAL. 493. doi:10.1016/j.cej.2024.152717
  4. Li, Ning; Aksoy, Muammer; Nutakki, Tirumala Uday Kumar; Singh, Pradeep Kumar; El-Shorbagy, M. A.; Dahari, Mahidzal; Alkhalaf, Salem; Alotaibi, Khaleed Omair; Ali, H. Elhosiny (2024). Development of a modified gas turbine-based sustainable power generation and water treatment system; Economical/environmental considerations and data-driven optimization, JOURNAL OF CLEANER PRODUCTION. 450. doi:10.1016/j.jclepro.2024.141904
  5. Maalla, Allam; Dahari, Mahidzal; Chaturvedi, Rishabh; Fouad, Yasser; Abdullaev, Sherzod; Farag, Ahmed; Alkhayyat, Ahmed; Abdo, G. M. (2024). Artificial neural network-based optimization of heat absorption process of phase change materials in a novel-designed finned-plate latent heat storage system, JOURNAL OF ENERGY STORAGE. 86. doi:10.1016/j.est.2024.111256
  6. Shuyuti, Nur Aini Syakimah Ahmad; Salami, Erfan; Dahari, Mahidzal; Arof, Hamzah; Ramiah, Harikrishnan (2024). Application of Artificial Intelligence in Particle and Impurity Detection and Removal: A Survey, IEEE ACCESS. 12, 31498-31514. doi:10.1109/ACCESS.2024.3351858
  7. Zhang, Yulan; Aldosky, Abdulrahman Jaffar; Goyal, Vishal; Meqdad, Maytham N.; Nutakki, Tirumala Uday Kumar; Alsenani, Theyab R.; Nguyen, Van Nhanh; Dahari, Mahidzal; Nguyen, Phuoc Quy Phong; Ali, H. Elhosiny (2024). A machine learning study on a municipal solid waste-to-energy system for environmental sustainability in a multi-generation energy system for hydrogen production, PROCESS SAFETY AND ENVIRONMENTAL PROTECTION. 182, 1171-1184. doi:10.1016/j.psep.2023.12.054
  8. Cao, Yan; Salem, Mohamed; Nasr, Samia; Sadon, Shayma Hamza; Singh, Pradeep Kumar; Abed, Azher M.; Dahari, Mahidzal; Almoneef, Maha M.; Wae-hayee, Makatar; Galal, Ahmed M. (2023). A novel heat recovery for a marine diesel engine with power and cooling outputs; exergetic, economic, and net present value investigation and multi-criteria NSGA-II optimization, AIN SHAMS ENGINEERING JOURNAL. 14(9). doi:10.1016/j.asej.2022.1020672090-4479
  9. Hai, Tao; Mansir, Ibrahim B.; Alshuraiaan, Bader; Abed, Azher M.; Ali, H. Elhosiny; Dahari, Mahidzal; Albalawi, Hind (2023). Numerical investigation on the performance of a solar air heater using inclined impinging jets on absorber plate with parallel and crossing orientation of nozzles, CASE STUDIES IN THERMAL ENGINEERING. 45. doi:10.1016/j.csite.2023.102913
  10. Liang, Xiangbo; Kumar, N. Bharath; Mansir, Ibrahim B.; Singh, Pradeep Kumar; Abed, Azher M.; Dahari, Mahidzal; Nasr, Samia; Albalawi, Hind; Cherif, A.; Wae-hayee, Makatar (2023). Management of heat transfer and hydraulic characteristics of a micro-channel heat sink with various arrangements of rectangular vortex generators utilizing artificial neural network and response surface methodology, CASE STUDIES IN THERMAL ENGINEERING. 44. doi:10.1016/j.csite.2023.102850
  11. Lin, Hao-Feng; Mansir, Ibrahim B.; Ameen, Hawzhen Fateh M.; Cherif, A.; Abdulwahab, Abdulkareem; Dahari, Mahidzal; Lin, Haitao; Aly, Ayman A.; Nasr, Samia (2023). Economic, environmental and multi objective optimization of a clean tri-generation system based co-firing of natural gas and biomass: An emergy evaluation, PROCESS SAFETY AND ENVIRONMENTAL PROTECTION. 173, 289-303. doi:10.1016/j.psep.2023.02.076
  12. Su, Zhanguo; Zhan, Wu; Sun, Yeguo; Dahari, Mahidzal; Abed, Azher M.; Ali, H. Elhosiny; Algelany, A. M. (2023). Multi-objective optimization and techno-economic evaluation of a capture/ separation/liquefaction scheme in a zero emission power/liquid N2/liquid CO2 production system based on biomass gasification and supercritical CO2 oxy-combustion cycle and ion transport membrane and Claude cycle, SEPARATION AND PURIFICATION TECHNOLOGY. 314. doi:10.1016/j.seppur.2023.123566
  13. Wang, Xiaoqin; Su, Zhanguo; Mansir, Ibrahim B.; Singh, Pradeep Kumar; Othman, Nashwan Adnan; Zhang, Lei; Li, Mingkui; Albdeiri, Mahmood Shaker; Ali, H. Elhosiny; Dahari, Mahidzal; Deifalla, Ahmed (2023). Thermal and hydrodynamic management of a finned-microchannel heat sink applying artificial neural network, CASE STUDIES IN THERMAL ENGINEERING. 45. doi:10.1016/j.csite.2023.102996
  14. Wang, Yanqin; Hedia, H. S.; Singh, Pradeep Kumar; Almas, M. A.; Attar, H. M.; Dahari, Mahidzal; Hedia, M. H.; Algelany, A. M.; Wae-hayee, Makatar (2023). An integrated sustainable system fueled by Co-Combustion of legume straw biomass and synthesis gas of SOFC: Optimization study using Signal-To-Noise ratio analysis, APPLIED THERMAL ENGINEERING. 230. doi:10.1016/j.applthermaleng.2023.120853
  15. Wang, Zeqi; Su, Zhanguo; Goyal, Vishal; Kumar, N. Bharath; Dahari, Mahidzal; Abdulwahab, Abdulkareem; Algelany, A. M.; Aouaini, Fatma; Rajab, Husam; Ali, H. Elhosiny (2023). Optimization and evaluation of a municipal solid waste-to-energy system using taguchi technique in a tri-generation system based on gas turbine with air and steam agents, PROCESS SAFETY AND ENVIRONMENTAL PROTECTION. 173, 461-471. doi:10.1016/j.psep.2023.03.037
  16. Zhan, Mingwang; Mansir, Ibrahim B.; Singh, Pradeep Kumar; Rajab, Husam; Abed, Azher M.; Dahari, Mahidzal; Nasr, Samia; Khan, Ilyas; Eldin, Sayed M.; Sui, Dianjie (2023). Thermal process simulation and multi-variable study/optimization of a novel geothermal-driven multi-generation process using bi-evaporator with zeotropic mixture, CASE STUDIES IN THERMAL ENGINEERING. 43. doi:10.1016/j.csite.2023.102790
  17. Zhang, Wei; Shu-jin, Chen; Mansir, Ibrahim B.; Singh, Pradeep Kumar; Mohsen, Fatimah Malek; Farag, Ahmed; Dahari, Mahidzal; Ali, H. Elhosiny; Bouzgarrou, Souhail Mohamed (2023). Proposing linear structure for annular thermoelectric generators; thermal, exergetic, mechanical, and economic analysis, THERMAL SCIENCE AND ENGINEERING PROGRESS. 42. doi:10.1016/j.tsep.2023.101932
  18. ul Husnain, Anees; Mokhtar, Norrima; Mohamed Shah, Noraisyah; Dahari, Mahidzal; Iwahashi, Masahiro (2023). A Systematic Literature Review (SLR) on Autonomous Path Planning of Unmanned Aerial Vehicles, DRONES. 7(2). doi:10.3390/drones7020118
  19. Abidin, Zamri Zainal; Ramadhani, Farah; Algaba, Juan Carlos; Shah, Noraisyah Mohamed; Dahari, Mahidzal; Mokhtar, Wan Zul Adli Wan (2022). Control system performance of a 7.3-meter radio telescope converted from telecommunication antenna to radio astronomy purposes in Malaysia, JOURNAL OF ASTRONOMICAL TELESCOPES INSTRUMENTS AND SYSTEMS. 8(3). doi:10.1117/1.JATIS.8.3.037001
  20. Abidin, Zamri Zainal; Ramadhani, Farah; Shah, Noraisyah Mohamed; Ibrahim, Zainol Abidin; Zhong, Chen; Dahari, Mahidzal; Radzi, Mohd Shazwan Mohd (2022). Optimal performance of data transmission between Malaysia-China for VLBI-based radio astronomy observation using Jive5ab, EXPERIMENTAL ASTRONOMY. . doi:10.1007/s10686-022-09838-9
  21. Cao, Yan; El-Shorbagy, M. A.; Dahari, Mahidzal; Cao, Dao Nam; El Din, ElSayed M. Tag; Huynh, Phat Huy; Wae-hayee, Makatar (2022). Examining the relationship between gas channel dimensions of a polymer electrolyte membrane fuel cell with two-phase flow dynamics in a flooding situation using the volume of fluid method, ENERGY REPORTS. 8, 9420-9430. doi:10.1016/j.egyr.2022.07.048
  22. Hashemian, Mehran; Jafarmadar, Samad; El-Shorbagy, M. A.; Rahman, Anas A.; Dahari, Mahidzal; Wae-hayee, Makatar (2022). Efficient heat extraction from the storage zone of solar pond by structurally improved spiral pipes; numerical simulation/experimental validation, ENERGY REPORTS. 8, 7386-7400. doi:10.1016/j.egyr.2022.05.247
  23. Junos, Mohamad Haniff; Khairuddin, Anis Salwa Mohd; Dahari, Mahidzal (2022). Automated object detection on aerial images for limited capacity embedded device using a lightweight CNN model, ALEXANDRIA ENGINEERING JOURNAL. 61(8), 6023-6041. doi:10.1016/j.aej.2021.11.0271110-0168
  24. Junos, Mohamad Haniff; Khairuddin, Anis Salwa Mohd; Thannirmalai, Subbiah; Dahari, Mahidzal (2022). Automatic detection of oil palm fruits from UAV images using an improved YOLO model, VISUAL COMPUTER. . doi:10.1007/s00371-021-02116-3
  25. Abidin, Z. Z., Rosli, Z., Radzi, M. S. M., Shah, N. M., Dahari, M., Ramadhani, F., . . . Hashim, N. (2021). Radio quiet and radio notification zones characteristics for radio astronomy in medium densely populated areas and humid tropical countries. Journal of Astronomical Telescopes Instruments and Systems, 7(2), 17. doi: 10.1117/1.jatis.7.2.027001
  26. Bo, Z., Mihardjo, L. W. W., Dahari, M., Abo-Khalil, A. G., Al-Qawasmi, A. R., Mohamed, A. M., & Parikhani, T. (2021). Thermodynamic and exergoeconomic analyses and optimization of an auxiliary tri-generation system for a ship utilizing exhaust gases from its engine. Journal of Cleaner Production, 287, 13. doi: 10.1016/j.jclepro.2020.125012
  27. Cao, Y., Ayed, H., Jarad, F., Togun, H., Alias, H., Issakhov, A., . . . El Ouni, M. H. (2021). MHD natural convection nanofluid flow in a heat exchanger: Effects of Brownian motion and thermophoresis for nanoparticles distribution. Case Studies in Thermal Engineering, 28, 12. doi: 10.1016/j.csite.2021.101394
  28. Cao, Y., Ayed, H., Togun, H., Shawabkeh, A., Dahari, M., Wae-hayee, M., . . . Marzouki, R. (2021). Heating a cold semi-annulus wall by MHD natural convetion with nanofluid. Case Studies in Thermal Engineering, 28. doi: 10.1016/j.csite.2021.101569
  29. Cao, Y., Mihardjo, L. W. W., Dahari, M., & Tlili, I. (2021). Waste heat from a biomass fueled gas turbine for power generation via an ORC or compressor inlet cooling via an absorption refrigeration cycle: A thermoeconomic comparison. Applied Thermal Engineering, 182, 12. doi: 10.1016/j.applthermaleng.2020.116117
  30. Cao, Y., Mihardjo, L. W. W., Dahari, M., Ghaebi, H., Parikhani, T., & Mohamed, A. M. (2021). An innovative double-flash binary cogeneration cooling and power (CCP) system: Thermodynamic evaluation and multi-objective optimization. Energy, 214, 10. doi: 10.1016/j.energy.2020.118864
  31. Cao, Y., Mihardjo, L. W. W., Dahari, M., Mohamed, A. M., Ghaebi, H., & Parikhani, T. (2021). Assessment of a novel system utilizing gases exhausted from a ship's engine for power, cooling, and desalinated water generation. Applied Thermal Engineering, 184, 14. doi: 10.1016/j.applthermaleng.2020.116177
  32. Cao, Y; Ayed, H; Togun, H; Alias, H; Bouzgarrou, SM; Wae-hayee, M; Marzouki, R (2021). Observation the melting process of the phase change material inside a half-cylindrical with thermal non-equilibrium porous media: CFD simulation, CASE STUDIES IN THERMAL ENGINEERING. 28. doi:10.1016/j.csite.2021.101496
  33. Dhahad, H. A., Ahmadi, S., Dahari, M., Ghaebi, H., & Parikhani, T. (2021). Energy, exergy, and exergoeconomic evaluation of a novel CCP system based on a solid oxide fuel cell integrated with absorption and ejector refrigeration cycles. Thermal Science and Engineering Progress, 21, 16. doi: 10.1016/j.tsep.2020.100755
  34. Junos, M. H., Khairuddin, A. S. M., Thannirmalai, S., & Dahari, M. (2021). An optimized YOLO-based object detection model for crop harvesting system. IET Image Processing, 15(9), 2112-2125. doi: 10.1049/ipr2.12181
  35. Safaei, M. R., Tlili, I., Gholamalizadeh, E., Abbas, T., Alkanhal, T. A., Goodarzi, M., & Dahari, M. (2021). Thermal analysis of a binary base fluid in pool boiling system of glycol-water alumina nano-suspension. Journal of Thermal Analysis and Calorimetry, 143(3), 2453-2462. doi: 10.1007/s10973-020-09911-5
  36. Ahmed, S. M., Kazi, S. N., Khan, G., Akram, N., Dahari, M., Zubir, M. N. M., . . . Zaharinie, T. (2020). Experimental investigation on drag reduction of flowing crop suspensions of the pulp fibers in circular pipe heat exchanger. Particulate Science and Technology, 38(4), 443-453. doi: 10.1080/02726351.2018.1564093
  37. Ahmed, Syed Muzamil; Kazi, Salim Newaz; Khan, Ghullamullah; Akram, Naveed; Dahari, Mahidzal; Zubir, Mohd Nashrul Mohd; Ahmad, Pervaiz; Zaharinie, Tuan (2020). Experimental investigation on drag reduction of flowing crop suspensions of the pulp fibers in circular pipe heat exchanger, PARTICULATE SCIENCE AND TECHNOLOGY. 38(4), 443-453. doi:10.1080/02726351.2018.1564093
  38. Akbar, Noreen Sher; Habib, M. Bilal; Dahari, Mahidzal; Akram, Javaria (2020). Effect of the Hall currents and thermal radiation on the flow of a nanofluid through a vertical rotating channel, MATHEMATICAL METHODS IN THE APPLIED SCIENCES. . doi:10.1002/mma.6986
  39. Bahiraei, M., Jamshidmofid, M., & Dahari, M. (2020). Second law analysis of hybrid nanofluid flow in a microchannel heat sink integrated with ribs and secondary channels for utilization in miniature thermal devices. Chemical Engineering and Processing-Process Intensification, 153, 12. doi: 10.1016/j.cep.2020.107963
  40. Cao, Y., Dahari, M., Tlili, I., & Raise, A. (2020). Investigation on the laminar flame speed of CH4/CO2/air mixture at atmospheric and high pressures using Schlieren photography. International Journal of Hydrogen Energy, 45(55), 31151-31161. doi: 10.1016/j.ijhydene.2020.08.061
  41. Cao, Y., Mohamed, A. M., Dahari, M., Delpisheh, M., & Haghghi, M. A. (2020). Performance enhancement and multi-objective optimization of a solar-driven setup with storage process using an innovative modification. Journal of Energy Storage, 32, 19. doi: 10.1016/j.est.2020.101956
  42. Ahmed, S. M., Kazi, S. N., Khan, G., Zubir, M. N. M., Dahari, M., Ibrahim, S., . . . Chowdhury, Z. Z. (2019). TOWARD IMPROVED HEAT DISSIPATION OF THE TURBULENT REGIME OVER BACKWARD-FACING STEP FOR THE Al2O3-WATER NANOFLUIDS: An Experimental Approach. Thermal Science, 23(3), 1779-1789. doi:10.2298/tsci170606236a
  43. Ahmed, Syed Muzamil; Kazi, Salim Newaz; Khan, Ghulamullah; Zubir, Mohd Nashrul Mohd; Dahari, Mahidzal; Ibrahim, Suriani; abu Talip, Mohammad Sofian; Ahmad, Pervaiz; Chowdhury, Zaira Zaman (2019). TOWARD IMPROVED HEAT DISSIPATION OF THE TURBULENT REGIME OVER BACKWARD-FACING STEP FOR THE Al2O3-WATER NANOFLUIDS: An Experimental Approach, THERMAL SCIENCE. 23(3), 1779-1789. doi:10.2298/TSCI170606236A
  44. Arasteh, H., Mashayekhi, R., Goodarzi, M., Motaharpour, S. H., Dahari, M., Toghraie, D. (2019). Heat and fluid flow analysis of metal foam embedded in a double-layered sinusoidal heat sink under local thermal non-equilibrium condition using nanofluid. Journal of Thermal Analysis and Calorimetry, 138(2), 1461-1476. doi: 10.1007/s10973-019-08168-x
  45. Hooman, K., Safaei, M. R., Togun, H., & Dahari, M. (2019). Thermohydraulics of the liquid films in rotating heat pipes. International Journal of Numerical Methods for Heat & Fluid Flow, 30(6), 2861-2866. doi: 10.1108/hff-02-2019-0097
  46. Kheirandish, A., Akbari, E., Nilashi, M., Dahari, M. (2019). Using ANFIS technique for PEM fuel cell electric bicycle prediction model. International Journal of Environmental Science and Technology, 16(11), 7319-7326. doi: 10.1007/s13762-019-02392-6
  47. Maleki, H., Safaei, M. R., Togun, H., Dahari, M. (2019). Heat transfer and fluid flow of pseudo-plastic nanofluid over a moving permeable plate with viscous dissipation and heat absorption/generation. Journal of Thermal Analysis and Calorimetry, 135(3), 1643-1654. doi:10.1007/s10973-018-7559-2
  48. Ahmed, S. M., Kazi, S. N., Khan, G., Sadri, R., Dahari, M., Zubir, M. N. M., . . . Ibrahim, R. (2018). Effect of various refining processes for Kenaf Bast non-wood pulp fibers suspensions on heat transfer coefficient in circular pipe heat exchanger. Heat and Mass Transfer, 54(3), 875-882. doi:10.1007/s00231-017-2176-3
  49. Ahmed, Syed Muzamil; Kazi, S. N.; Khan, Ghulamullah; Sadri, Rad; Dahari, Mahidzal; Zubir, M. N. M.; Sayuti, M.; Ahmad, Pervaiz; Ibrahim, Rushdan (2018). Effect of various refining processes for Kenaf Bast non-wood pulp fibers suspensions on heat transfer coefficient in circular pipe heat exchanger (vol 54, pg 875, 2018), HEAT AND MASS TRANSFER. 54(3), 883-883. doi:10.1007/s00231-017-2211-4
  50. Montazer, E., Salami, E., Yarmand, H., Chowdhury, Z. Z., Dahari, M., Kazi, S. N., Badarudin, A. (2018). Development of a new density correlation for carbon-based nanofluids using response surface methodology. Journal of Thermal Analysis and Calorimetry, 132(2), 1399-1407. doi:10.1007/s10973-018-6978-4
  51. Bhuiyan, M. S. H., Choudhury, I. A., Dahari, M., Nukman, Y., Dawal, S. Z. (2017). An Investigation into a Gear-Based Knee Joint Designed for Lower Limb Prosthesis. Applied Bionics and Biomechanics, 14.
  52. Bhuiyan, M. S. H.; Choudhury, I. A.; Dahari, M.; Nukman, Y.; Dawal, S. Z. (2017). An Investigation into a Gear-Based Knee Joint Designed for Lower Limb Prosthesis, APPLIED BIONICS AND BIOMECHANICS. 2017. doi:10.1155/2017/7595642
  53. Esfe, M. H., Razi, P., Hajmohammad, M. H., Rostamian, S. H., Sarsam, W. S., Arani, A. A. A., Dahari, M. (2017). Optimization, modeling and accurate prediction of thermal conductivity and dynamic viscosity of stabilized ethylene glycol and water mixture Al2O3 nanofluids by NSGA-II using ANN. International Communications in Heat and Mass Transfer, 82, 154-160.
  54. Kheirandish, A., Motlagh, F., Shafiabady, N., Dahari, M., Wahab, A. K. A. (2017). Dynamic fuzzy cognitive network approach for modelling and control of PEM fuel cell for power electric bicycle system. Applied Energy, 202, 20-31. doi: 10.1016/j.apenergy.2017.05.084.
  55. Sadri, R., Hosseini, M., Kazi, S. N., Bagheri, S., Ahmed, S. M., Ahmadi, G., Zubir, N., Sayuti, M., Dahari, M. (2017). Study of environmentally friendly and facile functionalization of graphene nanoplatelet and its application in convective heat transfer. Energy Conversion and Management, 150, 26-36. doi: 10.1016/j.enconman.2017.07.036
  56. Sadri, R., Hosseini, M., Kazi, S. N., Bagheri, S., Zubir, N., Ahmadi, G., Dahari, M., Zaharinie, T. (2017). A novel, eco-friendly technique for covalent functionalization of graphene nanoplatelets and the potential of their nanofluids for heat transfer applications. Chemical Physics Letters, 675, 92-97.
  57. Sadri, R., Kamali, K. Z., Hosseini, M., Zubir, N., Kazi, S. N., Ahmadi, G., Dahari, M., Huang, N. M., Golsheikh, A. M. (2017). Experimental study on thermo-physical and rheological properties of stable and green reduced graphene oxide nanofluids: Hydrothermal assisted technique. Journal of Dispersion Science and Technology, 38(9), 1302-1310.
  58. Sparham, M., Sarhan, A. A. D., Mardi, N. A., Hamdi, M., Dahari, M. (2017). ANFIS modeling to predict the friction forces in CNC guideways and servomotor currents in the feed drive system to be employed in lubrication control system. Journal of Manufacturing Processes, 28, 168-185. doi: 10.1016/j.jmapro.2017.05.020
  59. Tan, J. D., Dahari, M., Koh, S. P., Koay, Y. Y., Abed, I. A. (2017). A new experiential learning electromagnetism-like mechanism for numerical optimization. Expert Systems with Applications, 86, 321-333.
  60. Tan, J. D., Dahari, M., Koh, S. P., Koay, Y. Y., Abed, I. A. (2017). Analysis of the Effect of Search Step Size on the Accuracy and Convergence Properties of Electromagnetism-Like Mechanism Algorithm. Journal of Multiple-Valued Logic and Soft Computing, 28(4-5), 429-441.
  61. Yarmand, H., Zulkifli, N., Gharehkhani, S., Shirazi, S. F. S., Alrashed, A., Bin Ali, M. A., . . . Kazi, S. N. (2017). Convective heat transfer enhancement with graphene nanoplatelet/platinum hybrid nanofluid. International Communications in Heat and Mass Transfer, 88, 120-125. doi:10.1016/j.icheatmasstransfer.2017.08.010
  62. Afrand, M., Nadooshan, A. A., Hassani, M., Yarmand, H., Dahari, M. (2016). Predicting the viscosity of multi-walled carbon nanotubes/water nanofluid by developing an optimal artificial neural network based on experimental data, International Communications in Heat and Mass Transfer. 77(49-53), Article
  63. Afrand, M., Najafabadi, K. N., Sina, N., Safaei, M. R., Kherbeet, A. S., Wongwises, S., Dahari, M. (2016). Prediction of dynamic viscosity of a hybrid nano-lubricant by an optimal artificial neural network, International Communications in Heat and Mass Transfer. 76(209-214), Article
  64. Akbari, O. A., Toghraie, D., Karimipour, A., Safaei, M. R., Goodarzi, M., Alipour, H., Dahari, M. (2016). Investigation of ribs height effect on heat transfer and flow parameters of laminar water-Al2O3 nanofluid in a rib-microchannel, Applied Mathematics and Computation. 290(135-1530096-3003. )
  65. Bashirnezhad, K., Bazri, S., Safaei, M. R., Goodarzi, M., Dahari, M., Mahian, O., Dalkilica, A. S., Wongwises, S. (2016). Viscosity of nanofluids: A review of recent experimental studies, International Communications in Heat and Mass Transfer. 73(114-123), Review
  66. Bhuiyan, M. S. H., Choudhury, I. A., Dahari, M., Nukman, Y. (2016). An Investigation into Turning of ASSAB-705 Steel Using Multiple Sensors, Materials and Manufacturing Processes. 31(7896-904), Article
  67. Bhuiyan, M. S. H., Choudhury, I. A., Dahari, M., Nukman, Y., Dawal, S. Z. (2016). Application of acoustic emission sensor to investigate the frequency of tool wear and plastic deformation in tool condition monitoring, Measurement. 92(208-217), Article
  68. Esfe, M. H., Afrand, M., Gharehkhani, S., Rostamian, H., Toghraie, D., Dahari, M. (2016). An experimental study on viscosity of alumina-engine oil: Effects of temperature and nanoparticles concentration, International Communications in Heat and Mass Transfer. 76(202-208), Article
  69. Esfe, M. H., Afrand, M., Yan, W. M., Yarmand, H., Toghraie, D., Dahari, M. (2016). Effects of temperature and concentration on rheological behavior of MWCNTs/SiO2(20-80)-SAE40 hybrid nano-lubricant, International Communications in Heat and Mass Transfer. 76(133-138), Article
  70. Esfe, M. H., Yan, W. M., Afrand, M., Sarraf, M., Toghraie, D., Dahari, M. (2016). Estimation of thermal conductivity of Al2O3/water (40%)-ethylene glycol (60%) by artificial neural network and correlation using experimental data, International Communications in Heat and Mass Transfer. 74(125-128), Article
  71. Goodarzi, M., Kherbeet, A. S., Afrand, M., Sadeghinezhad, E., Mehrali, M., Zahedi, P., Wongwises, S., Dahari, M. (2016). Investigation of heat transfer performance and friction factor of a counter-flow double-pipe heat exchanger using nitrogen-doped, graphene-based nanofluids, International Communications in Heat and Mass Transfer. 76(16-23), Article
  72. Goshayeshi, H. R., Goodarzi, M., Safaei, M. R., Dahari, M. (2016). Experimental study on the effect of inclination angle on heat transfer enhancement of a ferrofluid in a closed loop oscillating heat pipe under magnetic field, Experimental Thermal and Fluid Science. 74(265-270), Article
  73. Goshayeshi, H. R., Safaei, M. R., Goodarzi, M., Dahari, M. (2016). Particle size and type effects on heat transfer enhancement of Ferro-nanofluids in a pulsating heat pipe, Powder Technology. 301(1218-1226), Article
  74. Hooman, K., Li, J., Dahari, M. (2016). Slip flow forced convection through microducts of arbitrary cross-section: Heat and momentum analogy, International Communications in Heat and Mass Transfer. 71(176-179), Article
  75. Kheirandish, A., Motlagh, F., Shafiabady, N., Dahari, M. (2016). Dynamic modelling of PEM fuel cell of power electric bicycle system, International Journal of Hydrogen Energy. 41(229585-9594), Article
  76. Kheirandish, A., Shafiabady, N., Dahari, M., Kazemi, M. S., Isa, D. (2016). Modeling of commercial proton exchange membrane fuel cell using support vector machine, International Journal of Hydrogen Energy. 41(2611351-11358), Article
  77. Quader, M. A., Ahmed, S., Ghazilla, R. A. R., Ahmed, S., Dahari, M. (2016). Evaluation of criteria for CO2 capture and storage in the iron and steel industry using the 2-tuple DEMATEL technique, Journal of Cleaner Production. 120(207-220), Article
  78. Rusman, N. A. A., Dahari, M. (2016). A review on the current progress of metal hydrides material for solid-state hydrogen storage applications, International Journal of Hydrogen Energy. 41(2812108-12126), Review
  79. Samsudin, M. R., Shee, Y. G., Adikan, F. R. M., Razak, B. B. A., Dahari, M. (2016). Fiber Bragg Gratings Hydrogen Sensor for Monitoring the Degradation of Transformer Oil, Ieee Sensors Journal. 16(92993-2999), Article
  80. Sparham, Mahdi; Sarhan, Ahmed A. D.; Mardi, N. A.; Dahari, M.; Hamdi, M. (2016). Cutting force analysis to estimate the friction force in linear guideways of CNC machine, MEASUREMENT. 85, 65-79. doi:10.1016/j.measurement.2016.02.017
  81. Tan, J. D., Dahari, M., Koh, S. P., Koay, Y. Y., Abed, I. A. (2016). An improved electromagnetism-like algorithm for numerical optimization, Theoretical Computer Science. 641(75-84), Article
  82. Yarmand, H., Gharehkhani, S., Shirazi, S. F. S., Amiri, A., Alehashem, M. S., Dahari, M., Kazi, S. N. (2016). Experimental investigation of thermo-physical properties, convective heat transfer and pressure drop of functionalized graphene nanoplatelets aqueous nanofluid in a square heated pipe, Energy Conversion and Management. 114(38-49), Article
  83. Yarmand, H., Gharehkhani, S., Shirazi, S. F. S., Amiri, A., Montazer, E., Arzani, H. K., Sadri, R., Dahari, M., Kazi, S. N. (2016). Nanofluid based on activated hybrid of biomass carbon/graphene oxide: Synthesis, thermo-physical and electrical properties, International Communications in Heat and Mass Transfer. 72(10-15), Article
  84. Yarmand, H., Gharehkhani, S., Shirazi, S. F. S., Goodarzi, M., Amiri, A., Sarsam, W. S., Alehashem, M. S., Dahari, M., Kazi, S. N. (2016). Study of synthesis, stability and thermo-physical properties of graphene nanoplatelet/platinum hybrid nanofluid, International Communications in Heat and Mass Transfer. 77(15-21), Article
  85. Alavi, S. M. A., Safaei, M. R., Mahian, O., Goodarzi, M., Yarmand, H., Dahari, M., Wongwises, S. (2015). A Hybrid Finite-Element/Finite-Difference Scheme for Solving the 3-D Energy Equation in Transient Nonisothermal Fluid Flow over a Staggered Tube Bank, Numerical Heat Transfer Part B-Fundamentals. 68(2), 169-183
  86. Bhuiyan, M. S. H., Choudhury, I. A., Dahari, M. (2015). Development of a control system for artificially rehabilitated limbs: a review, Biological Cybernetics. 109(2), 141-162
  87. Esfe, M. H., Karimipour, A., Yan, W. M., Akbari, M., Safaei, M. R., Dahari, M. (2015). Experimental study on thermal conductivity of ethylene glycol based nanofluids containing Al2O3 nanoparticles, International Journal of Heat and Mass Transfer. 88(728-734), Article
  88. Esfe, M. H., Saedodin, S., Naderi, A., Alirezaie, A., Karimipour, A., Wongwises, S., Goodarzi, M., bin Dahari, M. (2015). Modeling of thermal conductivity of ZnO-EG using experimental data and ANN methods, International Communications in Heat and Mass Transfer. 63, 35-40
  89. Esfe, M. H., Wongwises, S., Naderi, A., Asadi, A., Safaei, M. R., Rostamian, H., Dahari, M., Karimipour, A. (2015). Thermal conductivity of Cu/TiO2-water/EG hybrid nanofluid: Experimental data and modeling using artificial neural network and correlation, International Communications in Heat and Mass Transfer. 66(100-104), Article
  90. Este, M. H., Saedodin, S., Akbari, M., Karimipour, A., Afrand, M., Wongwises, S., Safaei, M. R., Dahari, M. (2015). Experimental investigation and development of new correlations for thermal conductivity of CuO/EG-water nanofluid. International Communications in Heat and Mass Transfer, 65, 47-51.
  91. Goodarzi, M., Amiri, A., Goodarzi, M. S., Safaei, M. R., Karimipour, M., Languri, E. M., Dahari, M. (2015). Investigation of heat transfer and pressure drop of a counter flow corrugated plate heat exchanger using MWCNT based nanofluids, International Communications in Heat and Mass Transfer. 66(172-179), Article
  92. Goshayeshi, H. R., Goodarzi, M., Dahari, M. (2015). Effect of magnetic field on the heat transfer rate of kerosene/Fe2O3 nanofluid in a copper oscillating heat pipe, Experimental Thermal and Fluid Science. 68(663-668), Article
  93. Haghshenasfard, M., Yeoh, G. H., Dahari, M., Hooman, K. (2015). On numerical study of calcium sulphate fouling under sub-cooled flow boiling conditions, Applied Thermal Engineering. 81, 18-27
  94. Hooman, K., Dahari, M. (2015). Thermal dispersion effects on forced convection in a parallel plate porous channel, Meccanica. 50(81971-1976), Article
  95. Nikkhah, Z., Karimipour, A., Safaei, M. R., Forghani-Tehrani, P., Goodarzi, M., Dahari, M., Wongwises, S. (2015). Forced convective heat transfer of water/functionalized multi-walled carbon nanotube nanofluids in a microchannel with oscillating heat flux and slip boundary condition, International Communications in Heat and Mass Transfer. 68(69-77), Article
  96. Nur, N. M., Dawal, S. Z. M., Dahari, M., Sanusi, J. (2015). Muscle activity, time to fatigue, and maximum task duration at different levels of production standard time, Journal of Physical Therapy Science. 27(72323-2326), Article
  97. Nur, N. M., Dawal, S. Z. M., Dahari, M., Sanusi, J. (2015). The effects of energy expenditure rate on work productivity performance at different levels of production standard time, Journal of Physical Therapy Science. 27(82431-2433), Article
  98. Quader, M. A., Ahmed, S., Ghazilla, R. A. R., Ahmed, S., Dahari, M. (2015). A comprehensive review on energy efficient CO2 breakthrough technologies for sustainable green iron and steel manufacturing, Renewable Sustainable Energy Reviews. 50(594-614), Review
  99. Sadeghinezhad, E., Kazi, S. N., Dahari, M., Safaei, M. R., Sadri, R., Badarudin, A. (2015). A Comprehensive Review of Milk Fouling on Heated Surfaces, Critical Reviews in Food Science and Nutrition. 55(12), 1724-1743
Scopus
  1. Duan P., Abed A.M., Chaturvedi R., Ahmad S.F., Absalamov T., Dahari M., Fouad Y. (2024). Heat absorption/release efficiency betterment of phase change material inside a shell-and-tube latent heat storage system under six different conditions of tube and fins, Journal of Energy Storage. 90. doi:10.1016/j.est.2024.111880
  2. Fei Z., Alghassab M.A., Singh P.K., Abdullaeva B.S., Dahari M., Abouzied A.S., Albaijan I., Alotaibi H.F., Alrawashdeh A.I., Alhadrawi M. (2024). High-Efficient photocatalytic degradation of Levofloxacin via a novel ternary Fe2O3/CeO2/ZnO Heterostructure: Synthesis Optimization, Characterization, toxicity assessment and mechanism insight, Chemical Engineering Journal. 493. doi:10.1016/j.cej.2024.152717
  3. Husnain A., Mokhtar N., Shah N.B.M., Dahari M.B., Azmi A.A., Iwahashi M. (2024). Gas concentration mapping and source localization for environmental monitoring through unmanned aerial systems using model-free reinforcement learning agents, PloS one. 19(2), e0296969. doi:10.1371/journal.pone.0296969
  4. Kumar Nutakki T.U., Ahmed O.A., Singh P.K., Abdullaev S., Dahari M., Alhadrawi M., Fouad Y. (2024). Thermal integration process for waste heat recovery of SOFC to produce cooling/H2/power/freshwater; cost/thermal/environmental optimization scenarios, Case Studies in Thermal Engineering. 61. doi:10.1016/j.csite.2024.104932
  5. Li N., Aksoy M., Uday Kumar Nutakki T., Kumar Singh P., El-Shorbagy M.A., Dahari M., Alkhalaf S., Omair Alotaibi K., Elhosiny Ali H. (2024). Development of a modified gas turbine-based sustainable power generation and water treatment system; Economical/environmental considerations and data-driven optimization, Journal of Cleaner Production. 450. doi:10.1016/j.jclepro.2024.141904
  6. Maalla A., Dahari M., Chaturvedi R., Fouad Y., Abdullaev S., Farag A., Alkhayyat A., Abdo G.M. (2024). Artificial neural network-based optimization of heat absorption process of phase change materials in a novel-designed finned-plate latent heat storage system, Journal of Energy Storage. 86. doi:10.1016/j.est.2024.111256
  7. Shuyuti N.A.S.A., Salami E., Dahari M., Arof H., Ramiah H. (2024). Application of Artificial Intelligence in Particle and Impurity Detection and Removal: A Survey, IEEE Access. . doi:10.1109/ACCESS.2024.3351858
  8. Yan C., Abed A.M., Chaturvedi R., Dahari M., Abdullaev S., Zhou X., Mahariq I., Elmasry Y. (2024). Sustainable commercially-scaled greenhouse building cooling solution: Integrating PCM storage, desiccant wheels, and absorption chillers powered by dual-source solar/biomass energy, Journal of Energy Storage. 101. doi:10.1016/j.est.2024.113871
  9. Zhang Y., Aldosky A.J., Goyal V., Meqdad M.N., Nutakki T.U.K., Alsenani T.R., Nguyen V.N., Dahari M., Nguyen P.Q.P., Ali H.E. (2024). A machine learning study on a municipal solid waste-to-energy system for environmental sustainability in a multi-generation energy system for hydrogen production, Process Safety and Environmental Protection. 182, 1171-1184. doi:10.1016/j.psep.2023.12.054
  10. Zhou X., Ding C., Abed A.M., Abdullaev S., Ahmad S.F., Fouad Y., Dahari M., Mahariq I. (2024). Techno-economic assessment and transient modeling of a solar-based multi-generation system for sustainable/clean coastal urban development, Renewable Energy. 233. doi:10.1016/j.renene.2024.121119
  11. Zhang G., Dizayee R.H., Goyal V., Jiao Y., Alsenani T.R., Majdi H.S., Dahari M., Nguyen V.G., Ali H.E., Cuong Le H. (2023). Proposal and exergetic/net present value optimization of a novel integrated process into a two-stage geothermal flash cycle, involving bi-evaporator refrigeration unit: Application of non-dominated sorting genetic algorithm (NSGA-II+LINMAP) method, Process Safety and Environmental Protection. 179, 735-753. doi:10.1016/j.psep.2023.09.025
  12. Abidin Z.Z., Ramadhani F., Shah N.M., Ibrahim Z.A., Zhong C., Dahari M., Radzi M.S.M. (2022). Optimal performance of data transmission between Malaysia-China for VLBI-based radio astronomy observation using Jive5ab, Experimental Astronomy. 53(3), 1165-1176. doi:10.1007/s10686-022-09838-9
  13. Cao Y., Abbas M., El-Shorbagy M.A., Gepreel K.A., Dahari M., Le V.V., Badran M.F., Huynh P.H., Wae-Hayee M. (2022). Thermo-hydraulic performance in ceramic-made microchannel heat sinks with an optimum fin geometry, Case Studies in Thermal Engineering. 36. doi:10.1016/j.csite.2022.102230
  14. Cao Y., Ayed H., Algelany A.M., Dahari M., Phong Nguyen P.Q., Gepreel K.A., Nhanh Nguyen V., Ehab M., Wae-Hayee M. (2022). Receiving heat from a PCM tank by using natural convection of water and NEPCM: A simulation for LHTES application, Case Studies in Thermal Engineering. 35. doi:10.1016/j.csite.2022.102123
  15. Cao Y., Ayed H., Dahari M., Sene N., Bouallegue B. (2022). Using artificial neural network to optimize hydrogen solubility and evaluation of environmental condition effects, International Journal of Low-Carbon Technologies. 17, 80-89. doi:10.1093/ijlct/ctab088
  16. Cao Y., Delpisheh M., Yousefiasl S., Athari H., El-Shorbagy M.A., Jarad F., Dahari M., Wae-Hayee M. (2022). Examination and optimization of a novel auxiliary trigeneration system for a ship through waste-to-energy from its engine, Case Studies in Thermal Engineering. 31. doi:10.1016/j.csite.2022.101860
  17. Cao Y., El-Shorbagy M.A., Dahari M., Cao D.N., Din E.M.T.E., Huynh P.H., Wae-hayee M. (2022). Examining the relationship between gas channel dimensions of a polymer electrolyte membrane fuel cell with two-phase flow dynamics in a flooding situation using the volume of fluid method, Energy Reports. 8, 9420-9430. doi:10.1016/j.egyr.2022.07.048
  18. Cao Y., Farouk N., Ayed H., Aly A.A., Jarad F., Dahari M., Wae-hayee M., Saleh B. (2022). Heat transfer improvement between a pair of heater and cooler inside an energy storage by using nano-encapsulated phase change material/water: A numerical modeling, Case Studies in Thermal Engineering. 30. doi:10.1016/j.csite.2022.101770
  19. Cao Y., Mansir I.B., Mouldi A., Aouaini F., Bouzgarrou S.M., Marzouki R., Dahari M., Wae-hayee M., Mohamed A. (2022). Designing a system for battery thermal management: Cooling LIBs by nano-encapsulated phase change material, Case Studies in Thermal Engineering. 33. doi:10.1016/j.csite.2022.101943
  20. Cao Y., Mansir I.B., Mouldi A., Gepreel K.A., Dahari M., Le T.H., Badran M.F., Nguyen V.N., Wae-hayee M. (2022). Using natural convection mechanism of nanofluid for cooling an embedded hot plate in corner of a square enclosure: A numerical simulation, Case Studies in Thermal Engineering. 33. doi:10.1016/j.csite.2022.101926
  21. Hashemian M., Jafarmadar S., El-Shorbagy M.A., Rahman A.A., Dahari M., Wae-hayee M. (2022). Efficient heat extraction from the storage zone of solar pond by structurally improved spiral pipes; numerical simulation/experimental validation, Energy Reports. 8, 7386-7400. doi:10.1016/j.egyr.2022.05.247
  22. Junos M.H., Mohd Khairuddin A.S., Dahari M. (2022). Automated object detection on aerial images for limited capacity embedded device using a lightweight CNN model, Alexandria Engineering Journal. 61(8), 6023-6041. doi:10.1016/j.aej.2021.11.027
  23. Junos M.H., Mohd Khairuddin A.S., Thannirmalai S., Dahari M. (2022). Automatic detection of oil palm fruits from UAV images using an improved YOLO model, Visual Computer. 38(7), 2341-2355. doi:10.1007/s00371-021-02116-3
  24. Le H.S., Galal A.M., Alhamrouni I., Aly A.A., Abbas M., Saidi A.S., Truong T.H., Dahari M., Wae-Hayee M. (2022). Heat transfer efficiency optimization of a multi-nozzle micro-channel heat sink utilizing response surface methodology, Case Studies in Thermal Engineering. 37. doi:10.1016/j.csite.2022.102266
  25. Liu Y., Mansir I.B., Dahari M., Nguyen X.P., Abbas M., Nguyen V.N., Wae-hayee M. (2022). Improvement of cooling of a high heat flux CPU by employing a cooper foam and NEPCM/water suspension, Journal of Energy Storage. 55. doi:10.1016/j.est.2022.105682
  26. Sui D., Mansir I.B., Gepreel K.A., Dahari M., Nguyen D.T., Badran M.F., Van Nguyen N., Wae-hayee M., Zhan M. (2022). Free convection to cool a hot square block by embedding in center of a chamber by nanofluid and magnetohydrodynamic, Case Studies in Thermal Engineering. 33. doi:10.1016/j.csite.2022.101980
  27. Wu Y., Mansir I.B., Althobaiti A., Cao Y., Dahari M., Nguyen D.T., Mohamed A., Huynh P.H., Wae-Hayee M. (2022). Employing numerical method for evaluating the heat transfer rate of a hot tube by nanofluid natural convection, Case Studies in Thermal Engineering. 35. doi:10.1016/j.csite.2022.102006
  28. Yang Z., Bouzgarrou S.M., Marzouki R., Aouaini F., El-Shorbagy M.A., Dahari M., Shah S.A., Suthar D.L. (2022). Cooling a Hot Semiannulus with Constant Heat Flux by Using Fe3O4 -Water Nanofluid and a Magnetic Field: Natural Convection Mechanism, Journal of Nanomaterials. 2022. doi:10.1155/2022/4761989
  29. Yee Heng T., Jian Ding T., Choe Wei Chang C., Jian Ping T., Choon Yian H., Dahari M. (2022). Permanent Magnet Synchronous Generator design optimization for wind energy conversion system: A review, Energy Reports. 8, 277-282. doi:10.1016/j.egyr.2022.10.239
  30. Abidin, Z. Z., Rosli, Z., Radzi, M. S. M., Shah, N. M., Dahari, M., Ramadhani, F., . . . Hashim, N. (2021). Radio quiet and radio notification zones characteristics for radio astronomy in medium densely populated areas and humid tropical countries. Journal of Astronomical Telescopes, Instruments, and Systems, 7(2). doi: 10.1117/1.JATIS.7.2.027001
  31. Bo, Z., Mihardjo, L. W., Dahari, M., Abo-Khalil, A. G., Al-Qawasmi, A. R., Mohamed, A. M., & Parikhani, T. (2021). Thermodynamic and exergoeconomic analyses and optimization of an auxiliary tri-generation system for a ship utilizing exhaust gases from its engine. Journal of Cleaner Production, 287. doi: 10.1016/j.jclepro.2020.125012
  32. Cao, Y., Ayed, H., Jarad, F., Togun, H., Alias, H., Issakhov, A., . . . El Ouni, M. H. (2021). MHD natural convection nanofluid flow in a heat exchanger: Effects of Brownian motion and thermophoresis for nanoparticles distribution. Case Studies in Thermal Engineering, 28. doi: 10.1016/j.csite.2021.101394
  33. Cao, Y., Ayed, H., Togun, H., Shawabkeh, A., Dahari, M., Wae-hayee, M., . . . Marzouki, R. (2021). Heating a cold semi-annulus wall by MHD natural convetion with nanofluid. Case Studies in Thermal Engineering, 28. doi: 10.1016/j.csite.2021.101569
  34. Cao, Y., Mihardjo, L. W. W., Dahari, M., & Tlili, I. (2021). Waste heat from a biomass fueled gas turbine for power generation via an ORC or compressor inlet cooling via an absorption refrigeration cycle: A thermoeconomic comparison. Applied Thermal Engineering, 182. doi: 10.1016/j.applthermaleng.2020.116117
  35. Cao, Y., Mihardjo, L. W. W., Dahari, M., Mustafa Mohamed, A., Ghaebi, H., & Parikhani, T. (2021). Assessment of a novel system utilizing gases exhausted from a ship's engine for power, cooling, and desalinated water generation. Applied Thermal Engineering, 184. doi: 10.1016/j.applthermaleng.2020.116177
  36. Cao, Y., Mihardjo, L. W., Dahari, M., Ghaebi, H., Parikhani, T., & Mohamed, A. M. (2021). An innovative double-flash binary cogeneration cooling and power (CCP) system: Thermodynamic evaluation and multi-objective optimization. Energy, 214. doi: 10.1016/j.energy.2020.118864
  37. Dhahad, H. A., Ahmadi, S., Dahari, M., Ghaebi, H., & Parikhani, T. (2021). Energy, exergy, and exergoeconomic evaluation of a novel CCP system based on a solid oxide fuel cell integrated with absorption and ejector refrigeration cycles. Thermal Science and Engineering Progress, 21. doi: 10.1016/j.tsep.2020.100755
  38. Junos, M. H., Mohd Khairuddin, A. S., Thannirmalai, S., & Dahari, M. (2021). An optimized YOLO-based object detection model for crop harvesting system. Iet Image Processing, 15(9), 2112-2125. doi: 10.1049/ipr2.12181
  39. Safaei, M. R., Tlili, I., Gholamalizadeh, E., Abbas, T., Alkanhal, T. A., Goodarzi, M., & Dahari, M. (2021). Thermal analysis of a binary base fluid in pool boiling system of glycol water alumina nano-suspension. Journal of Thermal Analysis and Calorimetry, 143(3), 2453-2462. doi: 10.1007/s10973-020-09911-5
  40. Cao, Y., Mohamed, A. M., Dahari, M., Delpisheh, M., & Haghghi, M. A. (2020). Performance enhancement and multi-objective optimization of a solar-driven setup with storage process using an innovative modification. Journal of Energy Storage, 32. doi:10.1016/j.est.2020.101956
  41. Bashirnezhad, K., Bazri, S., Safaei, M. R., Goodarzi, M., Dahari, M., Mahian, O., et al. (2016). Viscosity of nanofluids: A review of recent experimental studies, International Communications in Heat and Mass Transfer. 73(114-123), Article
  42. Bhuiyan, M. S. H., Choudhury, I. A., Dahari, M., Nukman, Y. (2016). An Investigation into Turning of ASSAB-705 Steel Using Multiple Sensors, Materials and Manufacturing Processes. 31(7896-904), Article
  43. Bhuiyan, M. S. H., Choudhury, I. A., Dahari, M., Nukman, Y., Dawal, S. Z. (2016). Application of acoustic emission sensor to investigate the frequency of tool wear and plastic deformation in tool condition monitoring, Measurement: Journal of the International Measurement Confederation. 92(208-217), Article
  44. Goshayeshi, H. R., Goodarzi, M., Safaei, M. R., Dahari, M. (2016). Experimental study on the effect of inclination angle on heat transfer enhancement of a ferrofluid in a closed loop oscillating heat pipe under magnetic field, Experimental Thermal and Fluid Science. 74(265-270), Article
  45. Hemmat Esfe, M., Afrand, M., Gharehkhani, S., Rostamian, H., Toghraie, D., Dahari, M. (2016). An experimental study on viscosity of alumina-engine oil: Effects of temperature and nanoparticles concentration, International Communications in Heat and Mass Transfer. 76(202-208), Article
  46. Hemmat Esfe, M., Afrand, M., Yan, W. M., Yarmand, H., Toghraie, D., Dahari, M. (2016). Effects of temperature and concentration on rheological behavior of MWCNTs/SiO2(20-80)-SAE40 hybrid nano-lubricant, International Communications in Heat and Mass Transfer. 76(133-138), Article
  47. Hemmat Esfe, M., Yan, W. M., Afrand, M., Sarraf, M., Toghraie, D., Dahari, M. (2016). Estimation of thermal conductivity of Al2O3/water (40%)-ethylene glycol (60%) by artificial neural network and correlation using experimental data, International Communications in Heat and Mass Transfer. 74(125-128), Article
  48. Hooman, K., Li, J., Dahari, M. (2016). Slip flow forced convection through microducts of arbitrary cross-section: Heat and momentum analogy, International Communications in Heat and Mass Transfer. 71(176-179), Article
  49. Quader, M. A., Ahmed, S., Raja Ghazilla, R. A., Ahmed, S., Dahari, M. (2016). Evaluation of criteria for CO2 capture and storage in the iron and steel industry using the 2-tuple DEMATEL technique, Journal of Cleaner Production. 120(207-220), Article
  50. Samsudin, M. R., Shee, Y. G., Mahamd Adikan, F. R., Abdul Razak, B. B., Dahari, M. (2016). Fiber Bragg Gratings Hydrogen Sensor for Monitoring the Degradation of Transformer Oil, IEEE Sensors Journal. 16(92993-2999), Article
  51. Sparham, M., Sarhan, A. A. D., Mardi, N. A., Dahari, M., Hamdi, M. (2016). Cutting force analysis to estimate the friction force in linear guideways of CNC machine, Measurement: Journal of the International Measurement Confederation. 85(65-79), Article
  52. Yarmand, H., Gharehkhani, S., Shirazi, S. F. S., Amiri, A., Alehashem, M. S., Dahari, M., et al. (2016). Experimental investigation of thermo-physical properties, convective heat transfer and pressure drop of functionalized graphene nanoplatelets aqueous nanofluid in a square heated pipe, Energy Conversion and Management. 114(38-49), Article
  53. Aboulhasan Alavi, S. M., Safaei, M. R., Mahian, O., Goodarzi, M., Yarmand, H., Dahari, M., Wongwises, S. (2015). A hybrid finite-element/finite-difference scheme for solving the 3-D energy equation in transient nonisothermal fluid flow over a staggered tube bank, Numerical Heat Transfer, Part B: Fundamentals. 68(2), 169-183
  54. Amiri, A., Sadri, R., Shanbedi, M., Ahmadi, G., Chew, B. T., Kazi, S. N., Dahari, M. (2015). Performance dependence of thermosyphon on the functionalization approaches: An experimental study on thermo-physical properties of graphene nanoplatelet-based water nanofluids, Energy Conversion and Management. 92, 322-330
  55. Bhuiyan, M. S. H., Choudhury, I. A., Dahari, M. (2015). Development of a control system for artificially rehabilitated limbs: a review, Biological Cybernetics. 109(2), 141-162
  56. Forooghi, P., Abdi, I. A., Dahari, M., Hooman, K. (2015). Buoyancy induced heat transfer deterioration in vertical concentric and eccentric annuli, International Journal of Heat and Mass Transfer. 81, 222-233
  57. Garoosi, F., Safaei, M. R., Dahari, M., Hooman, K. (2015). Eulerian-Lagrangian analysis of solid particle distribution in an internally heated and cooled air-filled cavity, Applied Mathematics and Computation. 250, 28-46
  58. Goodarzi, M., Amiri, A., Goodarzi, M. S., Safaei, M. R., Karimipour, A., Languri, E. M., Dahari, M. (2015). Investigation of heat transfer and pressure drop of a counter flow corrugated plate heat exchanger using MWCNT based nanofluids, International Communications in Heat and Mass Transfer. 66, 172-179
  59. Goshayeshi, H. R., Goodarzi, M., Dahari, M. (2015). Effect of magnetic field on the heat transfer rate of kerosene/Fe2O3 nanofluid in a copper oscillating heat pipe, Experimental Thermal and Fluid Science. 68(663-66808941777 (ISSN). )
  60. Haghshenasfard, M., Yeoh, G. H., Dahari, M., Hooman, K. (2015). On numerical study of calcium sulphate fouling under sub-cooled flow boiling conditions, Applied Thermal Engineering. 81, 18-27
  61. Hemmat Esfe, M., Karimipour, A., Yan, W. M., Akbari, M., Safaei, M. R., Dahari, M. (2015). Experimental study on thermal conductivity of ethylene glycol based nanofluids containing Al2O3 nanoparticles, International Journal of Heat and Mass Transfer. 88(728-734 )
  62. Hemmat Esfe, M., Saedodin, S., Akbari, M., Karimipour, A., Afrand, M., Wongwises, S., Safaei, M. R., Dahari, M. (2015). Experimental investigation and development of new correlations for thermal conductivity of CuO/EG-water nanofluid, International Communications in Heat and Mass Transfer. 65, 47-51
  63. Hemmat Esfe, M., Saedodin, S., Naderi, A., Alirezaie, A., Karimipour, A., Wongwises, S., Goodarzi, M., Dahari, M. B. (2015). Modeling of thermal conductivity of ZnO-EG using experimental data and ANN methods, International Communications in Heat and Mass Transfer. 63, 35-40
  64. Hemmat Esfe, M., Wongwises, S., Naderi, A., Asadi, A., Safaei, M. R., Rostamian, H., Dahari, M., Karimipour, A. (2015). Thermal conductivity of Cu/TiO2-water/EG hybrid nanofluid: Experimental data and modeling using artificial neural network and correlation, International Communications in Heat and Mass Transfer. 66(100-104 )
  65. Hooman, K., Dahari, M. (2015). Thermal dispersion effects on forced convection in a parallel plate porous channel, Meccanica. 50(81971-197600256455 (ISSN). )
  66. Hooman, K., Sauret, E., Dahari, M. (2015). Theoretical modelling of momentum transfer function of bi-disperse porous media, Applied Thermal Engineering. 75, 867-870
  67. Nikkhah, Z., Karimipour, A., Safaei, M. R., Forghani-Tehrani, P., Goodarzi, M., Dahari, M., Wongwises, S. (2015). Forced convective heat transfer of water/functionalized multi-walled carbon nanotube nanofluids in a microchannel with oscillating heat flux and slip boundary condition, International Communications in Heat and Mass Transfer. 68(69-7707351933 (ISSN). )
  68. Nur, N. M., Dawal, S. Z. M., Dahari, M., Sanusi, J. (2015). Muscle activity, time to fatigue, and maximum task duration at different levels of production standard time, Journal of Physical Therapy Science. 27(7), 2323-2326
  69. Nur, N. M., Dawal, S. Z. M., Dahari, M., Sanusi, J. (2015). The effects of energy expenditure rate on work productivity performance at different levels of production standard time, Journal of Physical Therapy Science. 27(82431-243309155287 (ISSN). )
  70. Quader, M. A., Ahmed, S., Ghazilla, R. A. R., Ahmed, S., Dahari, M. (2015). A comprehensive review on energy efficient CO2 breakthrough technologies for sustainable green iron and steel manufacturing, Renewable and Sustainable Energy Reviews. 50(594-614 )
  71. Sadeghinezhad, E., Kazi, S. N., Dahari, M., Safaei, M. R., Sadri, R., Badarudin, A. (2015). A Comprehensive Review of Milk Fouling on Heated Surfaces, Critical Reviews in Food Science and Nutrition. 55(12), 1724-1743
  72. Yarmand, H., Gharehkhani, S., Ahmadi, G., Shirazi, S. F. S., Baradaran, S., Montazer, E., Zubir, M. N. M., Alehashem, M. S., Kazi, S. N., Dahari, M. (2015). Graphene nanoplatelets-silver hybrid nanofluids for enhanced heat transfer, Energy Conversion and Management. 100, 419-428
  73. Yousefi, S., Atrens, A. D., Sauret, E., Dahari, M., Hooman, K. (2015). CFD Convective flow simulation of the varying properties of CO2-H2O mixtures in geothermal systems, Scientific World Journal. 2015( )
  74. Bhuiyan, M. S. H., Choudhury, I. A., Dahari, M. (2014). Monitoring the tool wear, surface roughness and chip formation occurrences using multiple sensors in turning, Journal of Manufacturing Systems. 33(4), 476-487
  75. Fiedler, T., White, N., Dahari, M., Hooman, K. (2014). On the electrical and thermal contact resistance of metal foam, International Journal of Heat and Mass Transfer. 72, 565-571
  76. Goodarzi, M., Safaei, M. R., Karimipour, A., Hooman, K., Dahari, M., Kazi, S. N., Sadeghinezhad, E. (2014). Comparison of the finite volume and lattice boltzmann methods for solving natural convection heat transfer problems inside cavities and enclosures, Abstract and Applied Analysis. 2014( )
  77. Goodarzi, M., Safaei, M. R., Oztop, H. F., Karimipour, A., Sadeghinezhad, E., Dahari, M., Kazi, S. N., Jomhari, N. (2014). Numerical study of entropy generation due to coupled laminar and turbulent mixed convection and thermal radiation in an enclosure filled with a semitransparent medium, The Scientific World Journal. 2014( )
  78. Goodarzi, M., Safaei, M. R., Vafai, K., Ahmadi, G., Dahari, M., Kazi, S. N., Jomhari, N. (2014). Investigation of nanofluid mixed convection in a shallow cavity using a two-phase mixture model, International Journal of Thermal Sciences. 75, 204-220
  79. Hooman, K., Tamayol, A., Dahari, M., Safaei, M. R., Togun, H., Sadri, R. (2014). A theoretical model to predict gas permeability for slip flow through a porous medium, Applied Thermal Engineering. 70(1), 71-76
  80. Sadri, R., Ahmadi, G., Togun, H., Dahari, M., Kazi, S. N., Sadeghinezhad, E., Zubir, N. (2014). An experimental study on thermal conductivity and viscosity of nanofluids containing carbon nanotubes, Nanoscale Research Letters. 9(1 )
  81. Chong, H. Y., Dahari, M., Yap, H. J., Loong, Y. T. (2013). Fuzzy-based risk prioritization for a hydrogen refueling facility in Malaysia, Journal of Zhejiang University: Science A. 14(8), 565-573
  82. Hassan, M., Sadri, R., Ahmadi, G., Dahari, M. B., Kazi, S. N., Safaei, M. R., Sadeghinezhad, E. (2013). Numerical study of entropy generation in a flowing nanofluid used in micro- and minichannels, Entropy. 15(1), 144-155
  83. Loong, Y. T., Dahari, M., Yap, H. J., Chong, H. Y. (2013). Development of a system configuration for a solar powered hydrogen facility using fuzzy logic control, Journal of Zhejiang University: Science A. 14(11), 822-834
Others
  1. Junos, M. H., Mohd Khairuddin, A. S., Thannirmalai, S., & Dahari, M. (2021). Automatic detection of oil palm fruits from UAV images using an improved YOLO model. The Visual Computer. doi:10.1007/s00371-021-02116-3
  2. Mohammad Reza Safaei, Iskander Tlili, Ehsan Gholamalizadeh,Tehseen Abbas,Tawfeeq Abdullah Alkanhal,Marjan Goodarzi &Mahidzal Dahari, 2020. Thermal analysis of a binary base fluid in pool boiling system of glycol water alumina nano-suspension. Journal of Thermal Analysis and Calorimetry
  3. Yan Cao, Leonardus WW. Mihardjo, Mahidzal Dahari,Hadi Ghaebi,Towhid Parikhani, Abdeliazim Mustafa Mohamed,2020.An innovative double-flash binary cogeneration cooling and power (CCP) system: Thermodynamic evaluation and multi-objective optimization. Energy
  4. Zhang Bo, Leonardus WW. Mihardjo, Mahidzal Dahari, Ahmed G. Abo-Khalil, Abdel-Rahman Al-Qawasmi, Abdeliazim Mustafa Mohamed, Towhid Parikhani, 2020. Thermodynamic and exergoeconomic analyses and optimization of an auxiliary tri-generation system for a ship utilizing exhaust gases from its engine. Journal of Cleaner Production.
  5. Nur, N. M., Dawal, S. Z. M., Dahari, M., & Zuhudi, N. Z. M. (2017, October). The Variation of Work Productivity and Muscle Activities at Different Levels of Production Target. In IOP Conference Series: Materials Science and Engineering (Vol. 248, No. 1, p. 012014).
  6. Nur, N. M., Dawal, S. Z. M., Dahari, M., & Zulkefli, N. F. (2017, October). The Mediating Effects of Muscle Activities on the Relationship of Production Standard Time and Work Productivity. In IOP Conference Series: Materials Science and Engineering (Vol. 248, No. 1, p. 012015).
  7. Samsudin, M. R., Shee, Y. G., Adikan, F. R. M., Razak, B. B. A., & Dahari, M. (2016). Fiber Bragg gratings hydrogen sensor for monitoring the degradation of transformer oil. IEEE Sensors Journal, 16(9), 2993-2999.
  8. Shamshirband, S., Malvandi, A., Karimipour, A., Goodarzi, M., Afrand, M., Petkovic, D., Dahari, M., Mahmoodian, N. 2015. Performance investigation of micro- and nano-sized particle erosion in a 90 degrees elbow using an ANFIS model Powder Technology. (Tier 2, Impact Factor = 2.349)
  9. Kheirandish, A., Kazemi, M. S., Dahari, M. 2014. Dynamic performance assessment of the efficiency of fuel cell-powered bicycle: An experimental approach International Journal of Hydrogen Energy. (Tier 2, Impact Factor = 2.93)
  10. Mohd Nur, N., Md Dawal, S. Z., & Dahari, M. (2014). A conceptual model of work productivity associated with work-related musculoskeletal disorders in the industrial repetitive task. In Advanced Materials Research (Vol. 845, pp. 623-626).
  11. Chong, H. Y., Dahari, M., Yap, H. J., & Loong, Y. T. (2013). Development of hazard assessment for hydrogen refueling station in Malaysia. In Applied Mechanics and Materials (Vol. 315, pp. 121-127). Trans Tech Publications Ltd.
  12. Loong, Y. T., Dahari, M., Yap, H. J., & Chong, H. Y. (2013). Modeling and simulation of solar powered hydrogen system. In Applied Mechanics and Materials (Vol. 315, pp. 128-135). Trans Tech Publications Ltd.
  13. Dahari, M., Liu, Y. (2012). A Review of Auto-Guided-Vehicles routing algorithms . 479-481(2012), 443-456.
  14. Dahari, M., & Tan, J. D. (2011, April). Forward and inverse kinematics model for robotic welding process using KR-16KS KUKA robot. In 2011 Fourth International Conference on Modeling, Simulation and Applied Optimization (pp. 1-6). IEEE.
  15. Taha, Z., Deboucha, A., & Dahari, M. B. (2010, November). Small-scale helicopter system identification model using recurrent neural networks. In TENCON 2010-2010 IEEE Region 10 Conference (pp. 1393-1397). IEEE.
  16. Abdul Mutalib, M. I., Dahari, M., Hisam, N. A., & Ramlan, R. (2009). Use of suitable equation of state for the conversion of volumetric to mass flowrate in ngv refueling measurement. Journal-The Institution of Engineers, Malaysia, 7(2), 5-12.
Books
  1. Mahidzal Dahari (2019). Modern Control Engineering. LAP LAMBERT Academic Publishing
Chapter in Books
  1. Nordin Saad and Mahidzal Dahari, 2020. A Controller for Natural Gas Fuel Dispenser with Multi-Level-Pressure Banks. Springer
  2. Mohammad Reza Safaei, Marjan Gooarzi, Omid Ali Akbari, Mostafa Safdari Shadloo and Mahidzal Dahari (2016). Performance Evaluation of Nanofluids in an Inclined Ribbed Microchannel for Electronic Cooling Applications, Electronics Cooling, Prof. S M Sohel Murshed (Ed.), InTech, DOI: 10.5772/62898. Available from: http://www.intechopen.com/books/electronics-cooling/performance-evaluation-of-nanofluids-in-an-inclined-ribbed-microchannel-for-electronic-cooling-appli
Article in Proceeding
  1. Mahidzal Dahari and Yeo S.E. 2010. Design and Development of Aircraft Cabin for Very Light Jet (VLJ).Asia Pacific lndustrial Engineering and Management Systems Conference
  2. M.Dahari, N.Saad, M.I.A. Mutalib. 2007. Implementation of System Identification to the Modeling of Meterless NGV Refueling Dispenser. ANGVA2007 Proceeding.
  3. M.Dahari, N.Saad, M.I.A. Mutalib, N.A. Hisam. 2006. Design and Implementation of a Minimum Switching Time Transitions for NGV Refueling, IANGV Proceeding NGV2006.
  4. V.R. Radhakrishnan, N.A. Hisam, M.I.A. Mutalib, M.Dahari, N.B Mellon, M.A. Abdullah, J. Mengat. 2005. Calculation of Mass of Gas Using Equation of State for NGV Refueling Equipment. ANGVA 2005 Conference.

RESEARCH INTEREST


  • Control Systems (Open-Loop Control, Feedback Control, System Dynamics, Transfer Function, State-Space Representation, Time-Domain, Frequency Domain, Observer)
  • Instrumentation (Measurement of sensors, Temperature, Pressure, Flow, Level, pH, Humidity, Force, Vibration, Torque , Transducer, Actuator, Signal Conditioner)
  • System Identification (Black-Box Model, White-Box Model, Grey-Box Model, Parametric Models, Non-Parametric Model, Non-linear Model)
  • Robotics (End-Effector, Manipulator, Degrees of Freedom, Forward and Inverse Kinematics, Path Planning, Force Control)
  • Automation (Industrial Automation, Process Automation, Mechatronics, Robotic Automation, PLC, SCADA, HMI, FieldBus, APC, DCS, Robotic Arm)
  • Plant & Process (Plant Engineering, Process Engineering, Plant Operations, Plant Design, PFD, P&ID, Single Line Diagram, Safety and Standards)
  • Nanotechnology (Nanomaterials, Nanofluids, Nanoparticles, Nanostructures, Nanoscale, Nanotubes, Graphene, AFM, SEM, TEM, XRD, NMR,)

RESEARCH PROJECT


National
  1. 2023 - 2026, Fundamental Research Grant Scheme (FRGS)
    Fundamental Study Of Gas Particles In Large Scale Metal Hydrides: A Model-based For Thermodynamic And Kinetic Analysis ( Principal Investigator(PI))
  2. 2023 - 2025, Bantuan Khas Penyelidikan (BKP Special)
    Revolutionizing Solar Energy Storage: A Novel, Sustainable, and More Efficient Device ( Co-Researcher)
  3. 2020 - 2023, RU Geran - Fakulti Program
    Study On The Effect Of Higher Operating Temperature For Alkaline Electrolyser On System Efficiency, Over Potential And Power Ratio ( Co-Researcher)
  4. 2020 - 2022, RU Geran - Fakulti Program
    Study on the Absorption and Desorption of Ti-based AB2-type Alloys based Material for Hydrogen Storage and Fuel System ( Principal Investigator(PI))
  5. 2021 - 2022, KW PNC(JIM)
    Hydrogen Storage System ( Principal Investigator(PI))
  6. 2017 - 2021, UM Grant - Frontier Research Grant
    First Light Observation Using The Upsi-um Radio Telescope ( Co-Researcher)
  7. 2018 - 2021, RU Geran - Fakulti Program
    Investigation Of Pulse Oximetry Optimization For Clinical Usage And Flexibility ( Co-Researcher)
  8. 2018 - 2021, RU Geran - Fakulti Program
    Using Radio Antenna Technique In Solar Activity Study And Electromagnetic Pre-seismic Signals Detection On A Global Scale ( Co-Researcher)
  9. 2018 - 2020, RU Geran - Fakulti Program
    Study On The Effect Of Higher Operating Temperature For Alkaline Electrolysis On Electricity Consumption ( Principal Investigator(PI))
  10. 2013 - 2017, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC))
    Artificial Intelligent Based Modeling And Control Strategies For Optimal Hydrogen Production From Biomedical Waste In A Microbial Electrolysis Cells (mec) Reactor ( Co-Researcher)
  11. 2013 - 2017, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC))
    Heat Transfer And Drag Loss Analysis In A Packed Bed Reactor ( Principal Investigator(PI))
  12. 2011 - 2016, High Impact Research - Ministry of Education (HIR-MOE) Cycle 1
    Hydrogen Refueling Station And Dispenser Control System. ( Principal Investigator(PI))
  13. 2012 - 2015, Geran Penyelidikan Universiti Malaya (UMRG) - AET (Innovative Technology (ITRC))
    Optimizing Vehicle Routing Problem By Metaheuristics Algorithm ( Co-Researcher)
  14. 2010 - 2011, Geran Penyelidikan Universiti Malaya (UMRG)
    DESIGN, TESTING, FABRICATION AND IMPLEMENTATION OF INTELLIGENT EMBEDDED CONTROLLER FOR 3-IN-1 WIND-SOLAR HYBRID RENEWABLE ENERGY AND RAIN WATER HARVESTER ( Principal Investigator(PI))
  15. 2020 - 2025, Long Term Research Grant Scheme (LRGS)
    Sustainable Development of Hydrogen Supply Chains for Malaysia: Low Carbon, Green, Economical and Safe Approach ( Principal Investigator(PI))
  16. 2020 - 2025, Long Term Research Grant Scheme (LRGS)
    Application of VLBI2010 Global Observing System (VGOS) Radio Telescope Facility in Tackling the Haze Issue ( Consultant)
  17. 2020 - 2023, Fundamental Research Grant Scheme (FRGS)
    Fundamental Study of Ti-based AB2-type Alloys for Absorption and Desorption of Hydrogen ( Principal Investigator(PI))
  18. 2020 - 2023, Fundamental Research Grant Scheme (FRGS)
    Low Frequency Investigation into Solar Radio Burst Origin and Dynamics, and Its Effect on Electromagnetic Variations in Earth's Ionosphere ( Consultant)
  19. 2020 - 2023, Others MOHE
    Consolidating technology development with LCA based value chain system development and sustainable business strategies for the production and utilization of bio-hythane from organic effluents ( Consultant)
  20. 2020 - 2022, Prototype Research Grant Scheme (PRGS)
    Optimizing of Powder-based Physical Vapor Deposition (PPVD) system for the production of durable continuously active antimicrobial coating on medical utensils ( Consultant)
  21. 2020 - 2022, Prototype Research Grant Scheme (PRGS)
    Solid Hydrogen as a Power Source ( Principal Investigator(PI))
  22. 2018 - 2019, Fundamental Research Grant Scheme (FRGS)
    Fundamental study of the alkaline electrolysis on the effect of higher operating temperature for electrical energy consumption ( Principal Investigator(PI))
  23. 2018 - 2019, Fundamental Research Grant Scheme (FRGS)
    Industry 4.0 Elements for the Smart Transportation Industry in Malaysia: An Autonomous Vehicle for Railway Track Inspection, Repair and Monitoring System ( Consultant)
  24. 2018 - 2019, Fundamental Research Grant Scheme (FRGS)
    Investigation of reflectance pulse oxymetry using multi-wavelength infrared fiber laser ( Consultant)
  25. 2017 - 2018, Fundamental Research Grant Scheme (FRGS)
    Preliminary study on cleaning bird nest using robotics technology ( Principal Investigator(PI))
  26. 2017 - 2018, Fundamental Research Grant Scheme (FRGS)
    Modelling of Passive Online Monitoring and Condition Assessment for Locked-In and Dementia Subjects ( Consultant)
  27. 2011 - 2015, High Impact Research (HIR)
    Hydrogen Refueling Station and Dispenser Control System ( Principal Investigator(PI))
  28. 2012 - 2015, Geran Penyelidikan Universiti Malaya (UMRG)
    Optimizing Vehicle Routing Problem By Metaheuristics Algorithm ( Principal Investigator(PI))
  29. 2010 - 2011, Postgraduate Research Grant(PPP)
    Design, Testing, Fabrication and Implementation of Intelligent Embedded Controller for 3-in-1 Wind Solar Hybrid Renewable Energy and Rain Water Harvester ( Principal Investigator(PI))
  30. 2006 - 2009, ScienceFund
    Intelligent Embedded Controller for NGV Refueling ( -Research Officer)
  31. 2003 - 2006, TECHNOFUND
    CNGDI Engine and Transmission - NGV Refueling and Facilities Equipment ( -Research Officer)
Private
  1. 2021 - 2024, FRGS
    A New Detent Torque Reduction Approach for Turbine-Based Green Energy Harvesting Systems via Stator Tooth-Rotor Magnet Paired Modifications, Xiamen University Malaysia ( Co-Researcher)
International
  1. 2021 - 2023, Xiamen University
    Effective Optimization of Off-Grid Solar-Wind Hybrid Renewable Energy Harvesting Systems, China Three Gorges University, China ( Co-Researcher)

CONSULTANCY PROJECT


  • The Green Hydrogen Generator and Fuel Cell System for Ev Charging Station, Swichtec, Consultant
    03 Nov 2022 - 31 Dec 2022 (National)
  • Task Force Researcher, center 4.0
    01 Dec 2019 - 01 Dec 2020 (National)
  • Auditor Audit Asset Penyelidikan Fakulti Kejuruteraan UM 2020, Fakulti Kejuruteraan UM
    01 Dec 2020 - 01 Dec 2020 (National)
  • Hydrogen Technology - Refueling Facilities and Equipment, PETRONAS
    01 Nov 2015 - 01 Nov 2016 (National)
  • Robotics and Automation Technology for Bird Nest, Swiftlet Ecopark
    01 Oct 2014 - 01 Oct 2016 (National)

PAPER PRESENTED


INVITED SEMINAR
  1. Air Liquide SEAPAC Smart Innovative Operations (SIO) Centre, Air Liquide SEAPAC Smart Innovative Operations (SIO) Centre, Air Liquide (University) (23 Jan 2018 - 23 Jan 2018)
  2. Program Taklimat Khas Pengenalan Pusat Kecemerlangan Penyelidikan dan Pembangunan (R&D) Teknologi Sukan Negara, Pengenalan Pusat Kecemerlangan Penyelidikan dan Pembangunan (R&D) Teknologi Sukan Negara, MOSTI (National) (31 Jul 2017 - 31 Jul 2017)
  3. MCY Ecosystem Support Workshop, Malaysia Commercialization Year 2017 (MCY), UMCIC (National) (18 May 2017 - 18 May 2017)
INVITED SPEAKER
  1. Preliminary Study of Robotic Technology for cleaning Edible Bird's Nest, Edible Bird Nest Industry Conference 2014, Kementerian Pertanian dan Industri Asas Tani - MOA (National) (25 Nov 2014 - 26 Nov 2014)
PRESENTER
  1. A Review of Auto-Guided-Vehicles Routing Algorithms, International Conference on Advances in Materials and Manufacturing Processes (International) ( )
  2. Nurnerical Study of Turboprop Engine Performance at Off-design Condition, 1st Management and Engineering Congress Singapore, Center for Applied Social Science, Singapore (International) (15 Aug 2013 - 16 Aug 2013)
  3. The Study of Pharmacy Management System from the Perspective of Software Architecture, 1st Management and Engineering Congress, Singapore, Center for Applied Social Science Research (CASSR),Singapore (International) (15 Aug 2013 - 16 Aug 2013)
  4. Development of Hazard Assessment for Hydrogen Refueling Station in Malaysia, 3rd International Conference on Mechanical and Manufacturing Engineering 2012, UTHM (International) (20 Nov 2012 - 21 Nov 2012)
  5. Modeling and Simulation of Solar Powered Hydrogen System, International Conference on Mechanical and Manufacturing Engineering (ICME2012), UTHM (International) (20 Nov 2012 - 21 Nov 2012)
OTHERS
  1. International Electrotechnical Commission (IEC) Training on standards development, marketing, communication to sale and copyright, TC/E/15- IEC Training , Jabatan Standard Malaysia (National) (24 Jul 2019 - 24 Jul 2019)
  2. Mesyuarat Penulisan SAR, Mesyuarat Penulisan SAR, Jabatan Kejuruteraan Elekrtik (University) (18 Jun 2019 - 18 Jun 2019)
  3. Complex Problem Workshop, Complex Problem Workshop, Department of Electrical Engineering (University) (30 Jan 2019 - 30 Jan 2019)

ACADEMIC/ PROF. SERVICES


Evaluation
  1. (2024) Thesis Seminar, University, (Reviewer)
  2. (2024) Candidature Defense Ainul Ashiqeen, University, (Reviewer)
  3. (2024) Candidature Defense for Ho Tian Siang, University, (Internal Examiner)
  4. (2024) Candidature Defense Aeriyn Dwierni, University, (Internal Examiner)
  5. (2024) Candidature Defense - Chang Xu, University, (Internal Examiner)
  6. (2024) Candidature Defense Ali Tameemi, University, (Internal Examiner)
  7. (2024) Proposal Defense M a Taher, University, (Reviewer)
  8. (2024) Proposal Defense Gui Xuan, University, (Reviewer)
  9. (2024) Proposal Defense Fatin Nur Ashyqin, University, (Reviewer)
  10. (2024) Proposal Defense Asad Ali, University, (Reviewer)
  11. (2024) Proposal Defense Wenzong Cui, University, (Reviewer)
  12. (2024) Invitation as a Panel: Umreg2024, University, (Reviewer)
  13. (2024) Permohonan Dana Program Kajian Jangka Pendek Kementerian Ekonomi 2024, University, (Reviewer)
  14. (2024) Expert Panel Workshop On The Development of a New Master of Science (Msc) Program: Master of Science in Intelligent Industrial Automation, National, (External Assessor)
  15. (2024) Proposal Defense Maaz Nusrat, University, (Reviewer)
  16. (2024) Proposal Defense Hammam Chouchane, University, (Reviewer)
  17. (2024) Proposal Defense Bilal Alam, University, (Reviewer)
  18. (2024) Proposal Defense Rony Ahmed Khan, University, (Reviewer)
  19. (2024) Proposal Defense Yang Zongqi, University, (Reviewer)
  20. (2024) Proposal Defense Ismat Jahan, University, (Reviewer)
  21. (2024) Proposal Defense Wei Zongxing, University, (Reviewer)
  22. (2024) Candidature Defense for Mohammad Mozammil Akhtar, University, (Reviewer)
  23. (2024) Candidature Defense Irfan Hussain Panhwar, University, (Reviewer)
  24. (2024) Panel Mesyuarat Jawatankuasa Harta Intelek Universiti Malaya, University, (Internal Examiner)
  25. (2024) Integrated Design Session 2023/2024, University, (Internal Examiner)
  26. (2022) Candidature Defense - Zhou Ruhan, University, (Internal Examiner)
  27. (2022) Candidature Defense - Putri Nor Liyana, University, (Reviewer)
  28. (2022) Candidature Defense - Daniar Fahmi, University, (Internal Examiner)
  29. (2022) Internal Evaluation - Mosti R&D Fund, University, (Internal Evaluator)
  30. (2022) Utp Thesis External Examiner - Ahsan Bashir, National, (External Examiner)
  31. (2022) Evaluation Xiamen University Malaysia Research Fund Proposal, National, (Internal Examiner)
  32. (2022) Candidature Defense - Koay Hong Vin, University, (Internal Examiner)
  33. (2022) Panel Penilai Trgs Fasa 1/2022, University, (Internal Assessor)
  34. (2022) Review Manuscript - Energy Reports, International, (Reviewer)
  35. (2022) Review Manuscript - Energies, International, (Reviewer)
  36. (2021) Machine Learning Regression-Cfd Models for The Nanofluid Heat Transfer of a Microchannel Heat Sink With Double Synthetic Jets, International, (Reviewer)
  37. (2021) Augmented Reality Temperature Sensing Protective Helmet for Airport Immigration Customs Officers, National, (Reviewer)
  38. (2021) Candidature Defence (Master of Engineering Science) Seminar - Md Zahirhossain (17221871/1), University, (Internal Examiner)
  39. (2021) Research Proposal Presentation Semester 2, 2020/2021 Dept of Electrical Engineering, University, (Internal Examiner)
  40. (2021) Kishore Kumarpakkirisami Churchill (Kva180030, 17021572/1 ), University, (Internal Examiner)
  41. (2021) A Novel Method to Realize a Nonuniform Heat Flux Distribution Through The Variable-Speed Scanning of An Electron Beam, International, (Reviewer)
  42. (2021) All-Condition Economy Evaluation Method for Fuel Cell Systems: System Efficiency Contour Map, International, (Reviewer)
  43. (2021) Improving Embedding Learning by Virtual Attribute Decoupling for Text-Based Person Search, International, (Reviewer)
  44. (2021) A Population Balance Model for The Chocolate Roller Refining Process, International, (Reviewer)
  45. (2021) Developing An Operating Instruction to Attenuate Pressure Deviations During Fuel Shortage Events of a Power Boiler Based On Dynamic Modelling, International, (Reviewer)
  46. (2021) Modeling and Experimental Studies of Oxygen Nanobubbles, International, (Reviewer)
  47. (2021) Panel Penilai Skim Geran Penyelidikan Fundamental Frgs Fasa 1/2021 Peringkat Universiti Malaya, University, (Internal Assessor)
  48. (2021) Proposal Defense for Afril Jahan: Eco Friendly Approach for Synthesis of Activated Carbon Nanocomposite Derived from Indegineous Lignocellulosic Residues and Its Application: Environmental and Energy Transfer Perspective, University, (Internal Assessor)
  49. (2021) Penilai Geran Fundamental Research Grant Frgs 2021, University, (Internal Examiner)
  50. (2021) Candidature Defence (Doctor of Philosophy) Seminar - Neha Bushan(17014478/1), University, (Internal Examiner)
  51. (2021) Juri Program Product Safety Award Psa 2021 Anjuran Suruhanjaya Tenaga St, National, (External Assessor)
  52. (2020) Title: Fuzzy Logic Control For Optimal Biohydrogen Production Using Microbial Electrolysis Cell (MEC) Fed-Batch Reactor For Storage Application, (Internal Examiner)
  53. (2020) MSc Dissertation for Muhammad Mudassir Ejaz (UTP), A Autonomous Visual Navigation and Collision- Free Strategy For A Tracked Robot , (External Examiner)
  54. (2019) PANEL PENILAI PROPOSAL DANA PENYELIDIKAN APPLIED RESEARCH GRANT SCHEME FOR TVET (T-ARGS) 2019 , (Reviewer)
  55. (2019) Internal Examiner: ABDULAZIZ AHMED SIYAD (KQC170007) DESIGN AND DEVELOPMENT OF IP BASED AUTOMATIC BOTTLE INSPECTION SYSTEM USING CONTROLLINO MAXI AUTOMATION, (Internal Examiner)
  56. (2019) Internal Examiner: ABDUL SYUKUR BIN ABDUL RAHMAN (KQC170002) METHOD AND SYSTEM FOR SUSTAINABLE AND CLEAN HYDROGEN ENERGY USING WATER SPLITTING AND CONCENTRATED SUNLIGHT , (Internal Examiner)
  57. (2019) PEMERIKSA BAGI PEPERIKSAAN PERKHIDMATAN BAGI TUJUAN PENGESAHAN DALAM PERKHIDMATAN - SKIM PENOLONG JURUTERA GRED JA29 , (Reviewer)
  58. (2019) PEMERIKSA DALAM LAPORAN PROJEK PENYELIDIKAN ~ NIK AHMAD FARHAN ABDUL AZIZ (KQK170013) GLOBAL WARMING IMPACT ON BUILDING HEATING, VENTILATING & AIR-CONDITIONING (HVAC) ENERGY CONSUMPTION -NUMERICAL STUDY , (Internal Examiner)
  59. (2019) REVIEW ARTICLE: TOWARDS DEVELOPING A CLASSIFICATION MODEL FOR WATER POTABILITY IN PHILIPPINE RURAL AREAS, (Reviewer)
  60. (2019) PEMERIKSA DALAM LAPORAN PROJEK PENYELIDIKAN ~ CHIN YEE KAI (KQC170001) SIMULATION AND OPTIMAL CONTROL OF CRUDE OIL SEPARATION PROCESS AT OFFSHORE FACILITIES TO IMPROVE EFFICENCY OF OIL & CONDENSATE RECOVERY, (Internal Examiner)
  61. (2019) PANEL PENILAI PROPOSAL DANA PENYELIDIKAN TVET APPLIED RESEARCH GRANT SCHEME (T-ARGS)- 2020 , (Advisory Committee)
  62. (2015) MSc Thesis, Moayad Hani Yacoub Abu Rmilah, An Integrated Simulation Platform for a Quadcopter System using Self-Tuning Fuzzy PID Controllers , (Internal Examiner)
  63. (2015) MSc Thesis, Ya acob Yusof, Lift Performance Analysis for Airfoil using Plasma Actuator , (Internal Examiner)
  64. (2015) MSc Thesis,Hassan Tareq Mohammed Almashhadani, Modeling and Simulation of a Quadcopter with PID , (Internal Examiner)
  65. (2015) Phd dissertation, Mohammad Reza Safaei, Numerical and Experimental Convection Heat Transfer to Nanofluids in Closed Conduit Flow , (Internal Examiner)
  66. (2015) PhD dissertation, Hussein Togun Abdullah, Experimental And Numerical Study of Heat Transfer to Nanofluid Flow in Sudden Enlargement of Annular Concentric Pipe , (Internal Examiner)
  67. (2014) MSc Thesis,Khairiah Mohd Mokhtar, Ergonomic Workstation Design for Wheelchair users at University of Malaya Main Library , (Internal Examiner)
  68. (2014) MSc Thesis, K.Subhachandran Kasinathan, Optimization of Chiller Usage in Air Conditioning Loop of a Factory in Malaysia , (Internal Examiner)
  69. (2012) PhD dissertation, Azeddien Mo Salah, Modelling, Identification and Hybrid Force-Position Control of Robot-Assisted Orthopaedic Surgery System , (Internal Examiner)
  70. (2012) MSc Thesis, Seyed Mehdi Hoseini Nodeh, APPLICAflON OF ACCEPTANCE SAMPLING METHOD IN CUSTOMIZED 2D BARCODE READER , (Internal Examiner)
  71. (2012) MSc Thesis, Kant Ananthanathorn, FEASIBILITY STUDY OF AUTOMATION-SYSTEM IN CORN INDUSTRY , (Internal Examiner)
  72. (2012) MSc dissertation by Okereke Stanley Onyemauche entitled as Comparison of Rapid Prototyping using Fused Deposition Modelling and Z Corp 3D Machine , (Internal Examiner)
  73. (2011) MSc dissertation by Santhira Segaran A/L Ganesan entitled as Effect of Prolonged Sitting on Low Back Pain Among Semiconductor Industry Operations , (Internal Examiner)
  74. (2011) MSc dissertation by Wang Chao entitled as Development of A Liquid Cooling System for PC Cluster, (Internal Examiner)
  75. (2011) MSc dissertation by Hema Vinodrai entitled as Implementation of Reliability Centered Maintenance for Better Productivity: Case Study in a type Manufacturing Company, (Internal Examiner)
  76. (2010) MSc dissertation by Sarmad Zahid Ahmed entitled as Development of An Early Warning System for Water Level In Rivers Using Global System for Mobile Communication , (Internal Examiner)
  77. (2010) MSc Thesis by Kruy Sothea entitled as Development of A Crush and Mix Machine for Composite Brick Fabrication , (Internal Examiner)
Contribution to external organisation
  1. (2025) Research Collaboration With UMT - Universiti Malaysia Terengganu, National, (Resource Person)
  2. (2024) Advisor to Start-Up Company, National, (Technical Advisor)
  3. (2024) Standardisasi Berkenaan Hydrogen Technologies, International, (Resource Person)
  4. (2024) Research Collaboration for Telco Tm-Webe, National, (Technical Advisor)
  5. (2022) Taskforce for Biomass to Energy Via Forestry & Timber Biomass, National, (Technical Advisor)
  6. (2022) Member of Feasibility Study of Biomass to Energy as Part of Energy Transition for National Energy Policy 2040, National, (Expert Advisor)
  7. (2022) Sesi Temubual Oleh Jawatankuasa Khas Jpm, National, (Expert Advisor)
  8. (2021) Appointment as Member of Taskforce: Kajian Mengenai Pewujudan Hab Biomass Untuk Industri Minyak Sawit' Under Aaibe Chair of Renewable Energy At Untversiti Tenaga Nasional (UNITEN), National, (Technical Advisor)
  9. (2021) AJK Jemputan Mesyuarat Jawatankuasa Spesifikasi Jpphb Bagi Projek Perintis Solar UM, University, (Technical Advisor)
  10. (2021) Laporan Kajian Siasatan Kes Pdrm, National, (Technical Advisor)
  11. (2019) Consultation on the Frontier Research Grant FG033-17AFR, Radio Cosmology Lab, Physics Department, University of Malaya
  12. (2019) TASK FORCE RESEARCHER FOR SMART PRODUCTION LAB INTEGRATION PROJECT, CENTER FOR RESEARCH IN INDUSTRY 4.0 (CRIO4.0)
  13. (2019) Task Force Lab, Center for Research in Industry 4.0
  14. (2018) Thesis External Examiner, Universiti Teknologi PETRONAS, National
  15. (2018) Assessment for Professorship, Academic Council of Qassim University, Saudi Arabia, International
  16. (2015) R&D Agreement, PETRONAS, National
  17. (2014) Memorandum of Agreement - MOA , Royal Bird's Nest , National
  18. (2014) Panel Temuduga Program Hadiah Latihan Persekutuan dan Cuti Belajar JPA Sesi 2015, JPA - Jabatan Perkhidmatan Awam, National
  19. (2014) Penilai Manuskrip UNIMAP, UNIMAP, National
  20. (2014) Ahli Jawatankuasa Pemilihan Kemasukan Bagi Program Ijazah Sarjana Muda Kejuruteraan di Fakulti Kejuruteraan Sesi 2014/12015, Universiti Malaya
  21. (2014) Invited Speaker for Edible Bird Nest Industry Conference 2014, EBNIC Conference 2014
  22. (2013) HIR Research Collaborator-Prof. Dr. Saeed Zeinali Heris, Ferdowsi University of Mashhad, Iran, International
  23. (2013) HIR Research Collaborator-Prof. Dr. Hakan Oztop, Firat University, Turkey, International
  24. (2013) HIR Research Collaborator-Dr. Kamel Hooman, University of Queensland, Australia, International
  25. (2013) HIR Research Collaborator-Prof. Dr. Nasser Ashgriz, Department Of Mechanical and Industrial Engineering, University of Toronto, Canada, International
  26. (2013) University-Industry Engineering Collaboration, AUNSEED Net Programme
  27. (2013) JAWATANKUASA PENILAIAN HARGA PEROLEHAN Membekal, menghantar, memasang, menguji dan mentauliah Scanning Tunneling spectroscopy (STS) dengan menggunakan peruntukan HIR/MOHE/21 untuk Jabatan Fizik, Fakulti Sains Universiti MalaYa, Jabatan Fizik, UM
  28. (2013) JAWATANKUASA PENILAIAN HARGA, LASER WELDING MACHINE, PROJEK PENYELIDIKAN HIR-MOHE, FAKULTI KEJURUTERAAN, UM, PROJEK PENYELIDIKAN HIR-MOHE, FAKULTI KEJURUTERAAN, UM
  29. (2012) High Impact Research Project-Prof. Dr. Kambiz Vafai, University of California, Riverside, International
  30. (2012) High Impact Research Project-Prof. Dr. Goodarz Ahmadi, Clarkson University, Potsdam, New York, International
  31. (2012) JAWATANKUASA PENlLAIAN SPESIFIKASI DAN TEKNIKAL, PROJEK PENYELIDIKAN HIR-MOHE, Microwove Scanning System, Jabatan Biomedikal, UM, Jabatan Biomedikal, UM
  32. (2012) Research talk on Hydrogen Refueling Facilities and Equipment, University Malaya
  33. (2012) JAWATANKUASA RUNDINGAN HARGA BAGI PEMBELIAN SPECTROFLUOROMETER WITH LIFETIME FLUORESCENE, PROJEK PENYELIDIKAN HIR-MOHE, JABATAN KIMIA,FAKULTI SAINS , JABATAN KIMIA,FAKULTI SAINS, UM
  34. (2012) JAWATANKUASA PENILAIAN SPESIFIKASI DAN TEKNIKAL,PROJEK PENYELIDIKAN HIR-MOHE Chassis Dynamometer System,Jabatan Kejuruteraan Mekanikal, Fakulti Kejuruteraan, Universiti Malaya, Jabatan Kejuruteraan Mekanikal, Fakulti Kejuruteraan, Universiti Malaya
  35. (2011) Program Master I-Leap: Commercializing Scientific Research to Relevant Industry & Global Market, Kementerian Pengajian Tinggi Malaysia
  36. (2011) Kursus Induksi bagi Kumpulan Pengurusan & Profesional dan Kumpulan Sokongan Gred 27 & 29, University Malaya
  37. (2011) Outcome Based Engineering Education: Experiance Of Malaysian Institutions Of Higher Learning (OBEE Seminar with EAC Asessment Workshop), Malaysian Society for Engineering & Technology (mSET)
  38. (2010) Kursus Asas Pengajaran (TPNL), University Malaya
  39. (2010) Bengkel Inovasi untuk Staf Akademik University Malaya, University Malaya
Media appearance
  1. (2024) Licensing Agreement With Energise, International, (Panelist/Moderator)
  2. (2024) Tnbf Ventures Into Hydrogen Technology in Collaboration With UM and Energise, International, (Panelist/Moderator)
  3. (2024) Tenaga Hidrogen Jana Elektrik Mesra Alam, National, (Interview)

SUPERVISION


Under Graduate Students
  1. (2024) Industrial Training, Nurin Irdina t Abd Rashid, NUR HAFIZAH `ALIYAH BINTI SHAHRUL NIZAM, MUHAMMAD DZULFAHMI BIN MOHD FAZIL
  2. (2022) Theoretical Study on Direct Coupling of a PV Array to a PEM Electrolyser
  3. (2022) Prediction and Detection of Jackknifing for Tractor Semi-Trailer Control Problem
  4. (2022) Development of an Intelligent Controller for PEMFC Air Supply System
  5. (2022) Design and Development of Collision Avoidance System for UAV Application Using Damped Harmonic Oscillator Concept
  6. (2022) Industrial Training, ISA ISHAQ BIN ZULKIFLI
  7. (2021) System Identification and Parameter Estimation for Kuala Lumpur Stock Exchange Composite Index Model
  8. (2021) System Identification and Parameter Estimation for Global Weather Model
  9. (2021) Pick and Place Robotic Arm using MODBUS Communication via MATLAB Software
  10. (2021) Conveyor Controller using MODBUS Communication via MATLAB Software
  11. (2015) Water Based Electrolysis, Yusri Amir Mohamed
  12. (2015) Single Line Diagram for Hydrogen Facility, Mohamad Zaim Bahaman
  13. (2015) Design and Development of Hydrogen Gas Tank, Salahuddin
  14. (2014) Experimental Study on Fuel Cell using Hydrogen Gas, Maisara Hannan Binti Yusoff
  15. (2014) Experimental Study of Hydrogen Refueling using PV Source, Nur Cahaya Binti Zulkissafri
  16. (2014) Experimental Study of H2 Tank using Compressible Hydrogen Gas, Mohammad Hanafi Bin Md Nasir
  17. (2013) Mathematical Modelling of Hydrogen Gas in Cylinder Tank, Nur Fazlan Bin Ibrahim
  18. (2013) Experimental Study on Hydrogen Refueling and Equipment, Muhamad Akmal Bin Muslim
  19. (2013) 3D Mechanical CAD Modelling of Hydrogen Purging System, Noriah Binti Mat Rofi
  20. (2012) Design and Development of Water Deionizer for Hydrogen Refueling System, Nurul Nadiah Mohd Zukry
  21. (2012) Design and Development of Water Based Compressor for Hydrogen Refueling System, Nurul Atikah Johari
  22. (2012) Design and Development of 3D Mechanical CAD Modelling of Electrolyzer for Hydrogen Refueling System, Nor Anis Nabila Abdul Razak
  23. (2011) Design and Development of 3D Mechanical CAD Modelling and CFD Analysis for Metal Hydride Based Hydrogen Storage System, Kok Chee Khean
  24. (2011) Design and Development of 3D Mechanical CAD Modelling and CFD Analysis for Hydrogen Refueling System, Chong Chin Tan
  25. (2011) Design and Development of 3D Mechanical CAD Modelling and CFD Analysis for Hydrogen Refueling Compressor, Loh Yet Ling
  26. (2010) Design and Development of Unmanned Aerial Vehicle (UAV), Chin Mei Chen
  27. (2010) Design and Development of Magnetic Field Generator, Muhammad Farid Mohd Kassim
  28. (2010) Design and Development of Level Control and Tracking System of Miniature Unmanned Aerial Vehicle (UAV),Ying Ying Koay
  29. (2010) Design and Development of Inline Rotary Separator, Loong Yin Tai
  30. (2010) Design and Development of Inferential Coriolis Flowmeter, Yeo Soo Ee
  31. (2010) Concept Development of Dual Mode Vehicle Transportation System, Muhamad Azren Muhamad Sabri
Postgraduate Student
PhD/ Doctoral
  1. (2024) OPEN, WIRA FIRDAUS HAJI YAAKOB
  2. (2024) SURFACE MODIFICATION OF GRAPHENE OXIDE BY LOW-TEMPERATURE PLASMA, MU JINJUN
  3. (2024) MICROPARTICLES DETECTION AND REMOVAL PROCESSING USING DEEP BELIEF NETWORK (DBN) FOR EDIBLE BIRD NEST (EBN), NUR AINI SYAKIMAH BINTI AHMAD SHUYUTI
  4. (2024) DESIGN AND ANALYSIS OF MULTI-LEGGED HEXAPOD ROBOTS WITH 6-DOF CONTROL METHOD, ANIS BINTI PAUZI
  5. (2023) Reliable and Efficient Gas Source Localization Using Reinforcement Learning for UAV Applications, ANEES UL HUSNAIN
  6. (2023) DEVELOPMENT OF A BIOMIMETIC TURTLE ROBOT INSPIRED BY NATURE AND ITS APPLICATION FOR REAL-TIME WATER QUALITY MONITORING SYSTEM, MUHAMMAD HAIZRUL FITRI BIN ZAINI
  7. (2022) A LIGHTWEIGHT ONE-STAGE OBJECT DETECTION MODELS FOR MACHINE VISION BASED RECOGNITION SYSTEM, MOHAMAD HANIFF BIN JUNOS
  8. (2021) DESIGN AND DEVELOP OF PICK AND PLACE ROBOTIC SYSTEM FOR FIBRE, KENNY KHOO KUAN YEW
  9. (2017) Synthesis of nanofluids containing eco-friendly functionalized carbon nanomaterials for improved heat dissipation, RAD SADRI
  10. (2016) DESIGN AND DEVELOPMENT OF MECHANICALLY CONTROLLED ABOVE KNEE PROSTHESIS, MD. SAYEM HOSSAIN BHUIYAN
  11. (2016) AN IMPROVED ELECTROMAGNETISM-LIKE MECHANISM ALGORITHM FOR THE OPTIMIZATION OF MAXIMUM POWER POINT TRACKING, TAN JIAN DING
  12. (2015) DYNAMIC MODELLING OF PROTON EXCHANGE MEMBRANE FUEL CELL SYSTEM FOR ELECTRIC BICYCLE, AZADEH KHEIRANDISH
  13. (2015) SYNTHESIS, THERMO-PHYSICAL PROPERTIES AND CONVECTION HEAT TRANSFER OF CARBON BASED HYBRID NANOFLUIDS, HOUMAN YARMAND
  14. (2014) THE RELATIONSHIP BETWEEN WORK PRODUCTIVITY PERFORMANCE AND VARIATIONS IN ACUTE RESPONSES, NURHAYATI BINTI MOHD NUR
  15. (2013) Enhancement of Cooling Performance of Molds and Critical Equipment by Nanofluid Coolant, Hourman Yarmand
  16. (2013) Design and Development of a System for Regulating Movement of Articial Lower Limb, Md. Sayem Hossain Bhuiyan
  17. (2013) Automation & Control in Robotics, Tian Jian Ding
  18. (2013) Automation & Control in Hydrogen Technology, Azadeh Kheirandish
  19. (2013) Study of thermo-physical properties, heat transfer, and frictional loss of GNPs, NDG and rGO nanofluids in closed conduit flow, EMAD SADEGHINEZHAD
  20. (2012) The Relationship Between Work Productivity Performance and Acute Responses Variation at Different Levels of Production Standard Time, NurHayati Mohd Nur
  21. (2012) Study of Thermo-Physical Properties Heat Transfer, and Frictional Loss of GNPS, NDG, and rGO Nanofluids in Closed Conduit Flow, Emad Sadeghinezhad
  22. (2012) Design and Development of a Mechanically Controlled Above Knee Prosthesis, MD. SAYEM HOSSAIN BHUIYAN
Master
  1. (2024) USING GNRFETS TO DESIGN TERNARY LOGIC GATES, LI FEIYANG
  2. (2024) DEEP LEARNING BASED DEFECT CLASSIFICATION FOR MULTI-LENS BEARINGS, JIAYI LI
  3. (2024) OPTIMIZATION OF PHOTOVOLTAIC SYSTEMS VIA ENHANCED WHALE OPTIMIZATION ALGORITHM, KOONG WON WEI
  4. (2023) ADVISORY CONTROL OF GAS PIPELINE TRANSMISSION MODELLLING USING MANUAL NETWORK, MUHAMMAD SYAFIQ BIN MOHD YUSOFF
  5. (2019) STUDY OF THE IMPORTANCE OF COMPONENT DOCEMENTATION IN INTERGRATION PHASE FROM PERPECTIVE OF SYSTEM INTERGRATOR, MARJAN GOODARZI
  6. (2017) PERFORMANCE ANALYSIS OF METAL HYDRIDE-BASED HYDROGEN STORAGE SYSTEM, NUR AIN AMIRAH RUSMAN
  7. (2016) HEAT TRANSFER AND FRICTIONAL PRESSURE DROP OF CROP FIBER SUSPENSIONS IN CLOSED CONDUIT FLOW AND NANOFLUID FLOW IN BACKWARD-FACING STEP, SYED MUZAMIL AHMED
  8. (2015) Study of Potential Metal and Alloys for Metal Hydride Based Hydrogen Storage, Nur Ain Amirah Rusman
  9. (2015) FLUID FLOW AND HEAT TRANSFER IN PACKED BED REACTOR, SYED MUZAMIL AHMED
  10. (2014) Performance of Coriolis Measurement using Hydrogen Flow, Hafidzi Hamdan
  11. (2014) Integrating Studies of Low Pressure Hydrogen Production of Microbial Electrolysis Cells (MECS) Reactor to a High Pressure Hydrogen Storage, Nor Anis Nabila Abdul Razak
  12. (2014) Fluid Flow and Heat Transfer in Packed Bed Reactor, Syed Mizamil Ahmed
  13. (2014) Experimental and Numerical Study of Mixed Convection Heat Transfer to Non-Newtonian Fluids inside Enclosures, Marjan Goodarzi
  14. (2014) Equation of State (EOS) for Static and Dynamic Mass Conditions of Compressible Hydrogen Gas, Nur Fazlan Ibrahim
  15. (2014) Design and Development of Vision System using LABVIEW, Norhasnina Mokhtar
  16. (2014) Design and Development of Temperature Control System using OMRON Programmable Controller (PLC), Muhammad Nizam Kamarol Zaman
  17. (2014) Design and Development of Product Labelling Inspection System using OMRON PLC, Ng Shao Liang
  18. (2014) Design and Development of Controller and Observer for DC Servo System, Ali Imran Ibrahim
  19. (2014) Automatic Satellite Positioning System Based on PID Controller, Muhamad Aidil Karim
  20. (2014) Application of Fuzzy Possibilistic Approach in Production-Distribution Planning and Modified Value Stream Mapping in Manufacturing Under Lean System, Eow Ting Ching
  21. (2013) State Space Modelling and Mathematical Study for Hydrogen Electrolyzer System, Madiha Zahari
  22. (2013) Fuzzy Based Risk Prioritization for a Hydrogen Refueling Facility in Malaysia, Chong Hue Yee
  23. (2013) Development of a System Configuration for a Solar Powered Hydrogen Facility using Fuzzy Logic Control, Loong Ying Tai
  24. (2013) Design and Development of Automatic Sorting System for Integrated Circuit (IC) Semiconductor Industry, Silasri Balakrishnan
  25. (2013) Design and Development of Automated Pick and Place System for Integrated Circuit (IC) Semiconductor Industry, Prakas Gopal Samy
  26. (2013) Air Conditional Sorting System using OMRON PLC Controller, Tan Ching Long
  27. (2013) DEVELOPMENT OF A SYSTEM CONFIGURATION FOR A SOLAR POWERED HYDROGEN FACILITY USING FUZZY LOGIC CONTROL, LOONG YING TAI
  28. (2013) Fuzzy Based Risk Prioritization for a Hydrogen Refueling Facility in Malaysia, CHONG HUE YEE
  29. (2012) Shuttle Cock Refilling System using 4DOF MB500 Pneumatic Robotics Module, Somsay Thongked
  30. (2012) Model Based Controller and Observer for Boost Converter, Siti Halma Johari
  31. (2012) Implementation of Full State Observer and Controller for Permanent Magnet Synchronous Motor (PMSM), Anis Pauzi
  32. (2012) Design and Development of Remote Measurement for Prime Mover using Arduino and FR Hope RFM12B, Mohd Akmal Yusof
  33. (2012) Design and Development of Low Cost Zigbee Based Home Energy Monitoring System, Hasan Firdaus Mohd Zaki
  34. (2012) Design and Development of Hot Press Metal Forming using KUKA Robot, Addam Paat
  35. (2012) Design and Development of Data Acquisition System for Fibre Bragg Grating Sensor using LabVIEW, Umi Hani Yaacob
  36. (2012) Design and Development of Automatic NGV Natural Gas Vehicle Refuelling Robot, Mohd Noor Shahril Yaacob
  37. (2012) Design and Development of an Automated Painting System for Automotive Industry, Mohd Azim Che Abdul Rahman Zaki
  38. (2012) Automated Tyre Sorting System using Mitsubishi FX3U PLC Controller, Arnom Lerdwongpaisan
  39. (2012) An Implementation of Fuzzy Logic Controller for Automotive Cruise Control, Seyed Pejman Hashemi
  40. (2012) An Implementation of Arduino Microcontroller for 6DOF Robotic Arm Manipulator, Wan Nizam Hakim Wan Sulaiman
  41. (2011) Observer Based Controller for Inverted Pendulum Model, Mohd Hafiz Jali
  42. (2011) Fuzzy Based Risk Prioritization for a Hydrogen Refueling Facility in Malaysia, CHONG HUE YEE
  43. (2011) Field Oriented Control (Vector Control) for AC Induction Motor Drive using State Feedback Linearization Method, Tarmizi Ahmad Izzuddin
  44. (2011) Feasibility Study of Pipeline Leak Detection Systems in Oil and Gas Industry, Faizal Abdullah
  45. (2011) Design and Development of Virtual Instrumentation System, Ang Wee Kien
  46. (2011) Design and Development of Controller and Observer for Linear Buck Converter, Mazwin Mazlan
  47. (2011) An Implementation of Full State Observer and Controller for Micro-Electromechanical-Systems (MEMS) Microgripper Model, Nor Hafizah Mohamad Salleh
  48. (2011) An Implementation of Full State Observer and Controller for Electro Hydraulic Servo (EHS) Model, Fauzal Naim Zohedi
  49. (2011) An Implementation of Full State Observer and Controller for Dynamic State Space Model of Zeta Converter, Hafez Sarkawi
  50. (2011) An Implementation of Controller and Observer for Pittman 8692 Brush DC Motor, Noor Haqkimi Abd Rahman
  51. (2010) Neural Network-Based Modeling And Control Design Of Small-Scale Helicopter, AbdelHakim Deboucha
  52. (2010) Development of Multi-AGV Real-Time Routing and Scheduling System, Liu Yang
  53. (2010) Design and Development Of A Vision-Guided Autonomous Underwater Robot, Mohamad Faizun
  54. (2010) DESIGN AND DEVELOPMENT OF A VISION-GUIDED AUTONOMOUS UNDERWATER ROBOT, MOHAMMAD FAIZUN
  55. (2010) DEVELOPMENT OF AGV REAL-TIME SCHEDULING SYSTEM, LIU YANG
  56. (2010) NEURAL NETWORK-BASED MODELING AND CONTROL DESIGN OF SMALL-SCALE HELICOPTER, ABD EL HAKIM DEBOUCHA

TEACHING


Master
  1. (2024) KQC7033 - Discrete-Time Control Systems
  2. (2022) KQC7033 - Discrete-Time Control Systems
  3. (2019) KQC7002 - Digital Control System
  4. (2019) KQG7005 - Manufacturing Automation and Control
  5. (2018) KQC7008 - Control and Automation
  6. (2018) KQF7003 - Digital Control System
  7. (2018) KQF7004 - Manufacturing Automation and Control
  8. (2018) KQG7005 - Manufacturing Automation and Control
  9. (2017) KQC7008 - Control and Automation
  10. (2017) KQE7009 - Control and Automation
  11. (2017) KQF7004 - Manufacturing Automation and Control
  12. (2017) KQG7005 - Manufacturing Automation and Control
  13. (2017) KXGM6305 - Control & Automation
  14. (2016) KXGM6305 - Control & Automation
  15. (2015) KXGI6104 - Manufacturing Automation and Control
  16. (2015) KXGK6109 - Control and Automation
  17. (2015) KXGP6105 - Manufacturing Automation and Control
  18. (2015) KXGT6314 - Manufacturing Automation dan Control
  19. (2014) KXGK6109 - Control and Automation
  20. (2014) KXGM6305 - Control & Automation
  21. (2014) KXGP6105 - Manufacturing Automation and Control
  22. (2013) KXGI6104 - Manufacturing Automation and Control
  23. (2013) KXGK6109 - Control and Automation
  24. (2012) KXGI6104 - Manufacturing Automation and Control
  25. (2012) KXGI6310 - Industrial Robots
  26. (2012) KXGP6105 - Manufacturing Automation and Control
  27. (2012) KXGP6310 - Manufacturing Automation and Control
  28. (2011) KXGI6104 - Manufacturing Automation and Control
  29. (2011) KXGK6102 - Digital Control Systems
  30. (2011) KXGP6310 - Manufacturing Automation and Control
  31. (2010) KXGP6310 - Manufacturing Automation and Control
Bachelor
  1. (2024) KIE3006 - Control System
  2. (2024) KIE4023 - Digital Control System
  3. (2024) KIE3010 - Instrumentation
  4. (2022) KIE3006 - Control System
  5. (2022) KIE4023 - Digital Control System
  6. (2021) KIE3010 - Instrumentation
  7. (2020) KEEE2243 - Instrumentation
  8. (2020) KEEE3253 - Control Systems
  9. (2020) KIE3006 - Control System
  10. (2020) KIE3010 - Instrumentation
  11. (2020) KIE4023 - Digital Control System
  12. (2019) KEEE2243 - Instrumentation
  13. (2019) KIE3010 - Instrumentation
  14. (2019) KIE4023 - Digital Control System
  15. (2018) KEEE2243 - Instrumentation
  16. (2018) KEEE3221 - Engineering Analysis and Computer
  17. (2018) KEEE3253 - Control Systems
  18. (2018) KIE3006 - Control System
  19. (2018) KQC7002 - Digital Control System
  20. (2017) KEEE2243 - Instrumentation
  21. (2017) KEEE3253 - Control Systems
  22. (2016) KEEE3253 - Control Systems
  23. (2016) KXGK6109 - Control and Automation
  24. (2014) KCEP2102 - Electronic
  25. (2013) KCEC4102 - Automation and Robotics
  26. (2013) KCEP1110 - Introduction to Electric Engineering
  27. (2013) KCEP2102 - Electronic
  28. (2012) KCEC4102 - Automation and Robotics
  29. (2012) KCEP1110 - Introduction to Electric Engineering
  30. (2012) KCEP2111 - Introduction to Engineering Electronic
  31. (2011) KCEC4102 - Automation and Robotics
  32. (2011) KCEP1110 - Introduction to Electric Engineering
  33. (2011) KCEP2102 - Electronic
  34. (2011) KCEP2111 - Introduction to Engineering Electronic
  35. (2010) KCEC4102 - Automation and Robotics
  36. (2010) KCEP1110 - Introduction to Electric Engineering
  37. (2010) KCEP2102 - Electronic
  38. (2010) KCEP2111 - Introduction to Engineering Electronic

PATENT/ IPR


  • Method And System Of Water Deionizer For Hydrogen Refueling System ((New Title: A System Of Deionizing Water)
    PATENT
  • A Bio-Based Method for Synthesizing an Additive for Use in Heat Transfer Fluid
    PATENT
  • A METHOD OF PRODUCING FUNCTIONALIZED GRAPHENE NANOFLUID
    PATENT
  • PRESSURE RELIEF SYSTEM FOR HYDROGEN
    PATENT
  • Stance control orthosis
    PATENT
  • Solar Plate
    Patent (International)
  • Method And System of Water Based Compressor For Hydrogen Refueling System (A Gas Compressor)
    PATENT
  • METHOD AND SYSTEM OF WATER BASED COMPRESSOR FOR HYDROGEN REFUELING SYSTEM
    PATENT
  • Method and Electrolyzer System for Hydrogen Refueling
    PATENT
  • Graphene nanoplatelets (GNPs) nanofluid use as an advanced fluid for heat exchanging liquids
    PATENT
  • A METAL HYDRIDE COMPRESSOR AND METHOD OF OPERATING THE SAME-PCT
    Patent (International)
  • A METAL HYDRIDE BASED HYDROGEN STORAGE SYSTEM-PCT
    Patent (International)
  • A WATER ELECTROLYZER
    PATENT
  • Method and System of Water Deionizer for Hydrogen Refueling System
    PATENT
  • A METAL HYDRIDE COMPRESSOR AND METHOD OF OPERATING THE SAME
    PATENT
  • METAL HYDRIDE BASED HYDROGEN STORAGE SYSTEM
    PATENT
  • INLINE ROTARY SEPARATOR
    PATENT
  • AN INFERENTIAL CORIOLIS MASS FLOWMETER
    PATENT
  • An lnferential Coriolis Mass Flowmeter-US PCT International Application
    Patent (International)
  • Solar Plate-US Patent
    Patent (International)
  • Solar Plate-US Industrial Design Application
    Industrial Design (International)
  • METAL HYDRIDE BASED HYDROGEN STORAGE SYSTEM
    Patent (National)
  • SOLAR ELECTROLYSIS HYDROGEN REFUELING SYSTEM
    Patent (National)
  • METAL HYDRIDE HYDROGEN COMPRESSOR
    Patent (National)
  • An Inferential Coriolis Mass Flowmeter
    Patent (National)
  • Inline Rotary Separator
    Patent (National)
  • NGV Refueling Switching Strategies Optimization
    Patent (National)
  • Method and System for calibration of mass flow measurement for volumetric flow measurement device
    Patent (National)
  • Heat Transfer coefficient and friction loss of flowing wood pulp fibre suspensions to monitor fibre and paper quality
    PATENT
  • SOLAR ELECTROLYSIS HYDROGEN REFUELING SYSTEM
    PATENT

SOCIAL RESPONSIBILITY ACTIVITIES


  • Sumbangan Komuniti Pusat Pengajian Tahfiz Kurnia Assyafi, (08 Dec 2017 - 08 Dec 2017)
  • Sumbangan Komuniti Maahad Turath Al Islami, (08 Dec 2017 - 08 Dec 2017)
  • Sumbangan Komuniti Waqaf Pembinaan Masjid Desa Sentosa, (25 Oct 2017 - 25 Oct 2017)
  • Sumbangan Komuniti Madrasah Tahfiz An Nasr Di Lot 1467, Batu 39, Jalan Banting, Dengkil, Kampung Olak Lempit, 42700, Banting, Selangor, (28 Dec 2016 - 28 Dec 2016)
  • Sumbangan Komuniti Madrasah Nadhirah At-Taqwa Di No.25, Persiaran Seroja 1/1, Bandar Amanjaya, 08000, Sg.Petani, Kedah, (28 Dec 2016 - 28 Dec 2016)
  • Sumbangan Komuniti Madrasah Tahfiz Darus Sunnah Di Lot 911, Km 8.4, Kampong Padang Melangit, 01000, Kangar, Perlis, (28 Dec 2016 - 28 Dec 2016)
  • Sumbangan Komuniti Madrasah Tahfiz Al Yamani Di 12h, Tingkat 8, Blok a, Flat Pkns, Jalan Raja Muda Musa, 50300, Kg. Baru, Kuala Lumpur, (28 Dec 2016 - 28 Dec 2016)
  • Sumbangan Komuniti Untuk Unicef - United Nation Children S Fund, Malaysia Country Office, (28 Dec 2016 - 28 Dec 2016)
  • Sumbangan Komuniti Madrasah Tahfiz Pinang Baru Di Kampong Pinang Baru, Bukit Besi, Dungun, 23200, Terengganu Darul Iman, (28 Dec 2016 - 28 Dec 2016)
  • Sumbangan Komuniti Madrasatuttahfizil Quran Riyadhil Jannah Di Masjid Lama, Kampung Pekan Lama, 35600, Sungkai, Perak Darul Ridzuan, (28 Dec 2016 - 28 Dec 2016)
  • Sumbangan Komuniti Madrasah Tahfiz Al Hikmah Di Kampung Belukar, Padang Siding, 02600, Arau, Perlis, Darul Sunnah, (28 Dec 2016 - 28 Dec 2016)
  • Sumbangan Komuniti Madrasah Lorong Alif Di No. 847, Lorong Alif, 06000 Jitra, Kedah Darul Aman, (28 Dec 2016 - 28 Dec 2016)
  • Panel Temuduga Jpa - Program Hadiah Latihan Persekutuan dan Cuti Belajar Sesi 2015, (07 Nov 2014 - 07 Nov 2014)
  • Research Talk On Safety Design for Metal Hydride Based Hydrogen Storage System, (05 Oct 2012)
  • Penceramah Program Kecemerlangan Pelajar Pmr dan Spm 2012, Mrsm Pdrm, (30 Jan 2012 - 30 Jan 2012)

COURSE ATTENDED


External Course
NATIONAL
  1. UM Deep Tech, UMCIC (08 Jan 2022 - 17 Jul 2022)
Internal/ External Course
EXTERNAL COURSE
  1. LABVIEW FGPA TRAINING, Virtual Instruments Sdn Bhd, Petaling Jaya (14 Oct 2010 - 15 Oct 2010)
  2. OUTCOME BASED ENGINEERING EDUCATION EXPERIENCES, Hotel Hilton, Kuching, Sarawak (19 Oct 2011 - 20 Oct 2011)
  3. ONE DAY WORKSHOP ON EAC ASSESSMENT, Hotel Hilton, Kuching, Sarawak (21 Nov 2011 - 22 Nov 2011)
  4. PROGRAM MASTER I-LEAP, Kampus Akept, Bandar Enstek (20 Oct 2011 - 21 Oct 2011)
  5. MCY ECOSYSTEM SUPPORT WORKSHOP, Taman Teknologi Malaysia, Bukit Jalil (18 May 2017 - 18 May 2017)
  6. SWAGELOK INSTALLATION TRAINING, Subang Jaya (01 Jun 2013 - 01 Jun 2013)
INDUCTION COURSE
  1. KURSUS INDUKSI, Aras 1, Bangunan Peperiksaan (24 Jun 2010 - 24 Jun 2010)
  2. KURSUS INDUKSI, Pusat Asasi Sains (26 May 2011 - 26 May 2011)
  3. KURSUS INDUKSI, Bilik Seminar 3, Aras 2, Blok C (10 Jun 2010 - 23 Jun 2010)
  4. KURSUS INDUKSI, Bilik Seminar 3, Aras 2, Blok C (09 Jun 2010 - 09 Jun 2010)
COURSES ORGANIZED BY PTJ
  1. PROGRAM TEAMBUILDING 2016, FAKULTI KEJURUTERAAN, Kem Bina Negara, Ulu Sepri, Rembau (18 Feb 2016 - 20 Feb 2016)
  2. SPSS BASIC, Makmal Komputer 12-4, Wisma R&D UM (27 Jul 2016 - 28 Jul 2016)
  3. WORKSHOP: SPECTRUM (BASIC) ORGANIZED BY ADEC UM, Makmal Komputer, Blok Y Fakulti Kejuruteraan (15 Feb 2017 - 15 Feb 2017)
  4. BENGKEL SPECTRUM, Makamal Komputer , Aras 3, Blok Y, Fakj (15 Feb 2017 - 15 Feb 2017)
OFFICIAL VISIT
  1. BENCH MARKING VISIT, (23 Oct 2011 - 30 Oct 2011)
  2. BENCH MARKING VISIT , (23 Oct 2011 - 30 Oct 2011)
RESEARCH
  1. GREEN HYDROGEN GENERATOR AND FUEL CELL SYSTEM, (02 Jul 2023 - 29 Sep 2023)