PERSONAL DETAIL


DR. KHOO SHIN YEE

Department of Mechanical Engineering
Faculty of Engineering
 
  khooshinyee@um.edu.my
 Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, W.Persekutuan Kuala Lumpur, Malaysia
 
ResearcherID Link
  http://www.researcherid.com/rid/A-3071-2014

ACADEMIC QUALIFICATION
(Qualification), (Institution).



PROFESSIONAL
(Organisation), (Role), (Year), (Level).


  • Board of Engineers Malaysia , Graduate Engineer, 2011, (National)
  • ADVANCED STRUCTURAL INTEGRITY & VIBRATION RESEARCH (ASIVR) GROUP, UNIVERSITI MALAYSIA PAHANG (UMP), Member, 2012, (National)
  • Inverse Problems in Science and Engineering, Assessment, 2014, (International)
  • ADVANCED SHOCK AND VIBRATION RESEARCH (ASVR) GROUP, UNIVERSITY OF MALAYA (UM), Membership, 2014, (University)
  • ICEDA2016 (International Conference on Engineering Design and Analysis 2016), Technical Committee Ukjk, 2016 to 2016, (International)
  • International Conference on Cement and Functional Materials 2017, Technical Committee Ukjk, 2017 to 2017, (International)
  • Scientific Review Committee for 2nd Malaysia University-Industry Green Building Collaboration Symposium (MU-IGBC 2018), Scientific Committee, 2018 to 2018, (University)
  • Asian Review of Mechanical Engineering, Editorial Board Member, 2018, (International)
  • World Academy of Science, Engineering and Technology, Scientific Committee, 2018, (International)
  • Journal of Engineering and Technology Sciences, Reviewer, 2018, (International)

ADMINISTRATIVE DUTIES
(Role), (Level), (Start date),(End Date).


  • Academic staff representative for the evaluation panel (Re-accreditation of the program of Master of Mechanical Engineering), University Malaya, 01/03/2018 to 01/03/2018
  • Mechanical Laboratory Review Committee, Faculty, 24/01/2018 to 24/01/2019
  • Chairman for Candidature Defense Seminar (KHA130146, Faculty, 29/08/2017 to 29/08/2017
  • Chairman for Candidature Defense Seminar (KHA150082), Faculty, 22/08/2017 to 22/08/2017
  • Chief Coordinator for Faculty Mathematics Subject in SEM 1, 2017/2018 , Faculty, 18/08/2017 to 14/01/2018 ((Replacement for the Dr. Khairunnisa - maternity leave), )
  • ICGPA Committee, Faculty, 15/08/2017 to 30/12/2017
  • Committee of Course Learning Outcome in Mechanical Department , Faculty, 01/08/2017 to 31/12/2019
  • Softskill Committee in Mechanical Department, Faculty, 01/08/2017 to 31/12/2019
  • Evaluation Panel for National Conference of Professional Staff and Management Staff in Engineering 2017, National, 21/07/2017 to 02/08/2017
  • Industrial Training Supervisor for Academic Session 2016/2017, Faculty, 17/07/2017 to 29/09/2017
  • Representative (Department of Mechanical Engineering)- Benchmarking Visit from Nottingham University to Mechanical Engineering Programme of University of Malaya, International, 10/07/2017 to 10/07/2017
  • Mathematic Committee, Faculty, 02/01/2017 to 31/12/2018
  • Chairman-Candidature Defense Seminar (KHA120056), Faculty, 28/09/2016 to 28/09/2016 (2.Chairman-Candidature Defense Seminar (KHA120056), Department Of Mechanical Engineering, Faculty Of Engineering,28-Sept-16)
  • Panel-Candidature Defense Seminar (KHA130108), Faculty, 20/04/2016 to 20/04/2016 (Panel)
  • Representative (Department of Mechanical Engineering)- Benchmarking Visit from Faculty of Mechanical Engineering, University Technology Petronas,Perak to Mechanical Engineering Programme of University of Malaya, University Malaya, 17/03/2016 to 17/03/2016 (Benchmarking)
  • Chairman-Candidature Defense Seminar (KHA130090), Faculty, 07/03/2016
  • PIC for the Collaboration with University of Chang'an, China, International, 15/02/2016
  • Panel-Candidature Defense Seminar (KGA140027), Faculty, 11/01/2016 to 11/01/2016
  • Chairman-Candidature Defense Seminar (KHA120146), Faculty, 19/11/2015 to 19/11/2015
  • PTJ Committee-Evaluation for PPP Grant Cycle 2/2015 (Faculty of Engineering) , Faculty, 29/10/2015 to 05/11/2015
  • Chairman-Candidature Defense Seminar (KGA130069), Faculty, 05/10/2015 to 05/10/2015
  • PIC for Mechanical Engineering Programme during EAC Visit , University Malaya, 28/09/2015 to 28/09/2015
  • Industrial Training Supervisor for Academic Session 2014/2015, Faculty, 28/08/2015
  • Representative (Department of Mechanical Engineering)- Benchmarking Visit from Faculty of Mechanical Engineering, Tun Hussein Onn University, Batu Pahat to Mechanical Engineering Programme of University of Malaya , University Malaya, 25/08/2015 to 25/08/2015
  • PPGP Panel-Evaluation for PPP Grant Cycle 1/2015 (Faculty of Engineering), University Malaya, 10/08/2015 to 14/08/2015
  • Representative (Department of Mechanical Engineering)- Benchmarking Visit from Faculty of Engineering of Technology, Multimedia University, Melaka to Mechanical Engineering Programme of University of Malaya, University Malaya, 07/08/2015 to 07/08/2015
  • Representative (Department of Mechanical Engineering)- Board of Examiners Meeting for Master VIVA (KGA120096), Faculty, 31/07/2015 to 31/07/2015
  • Chairman-Candidature Defense Seminar (KHA110028), Faculty, 19/05/2015 to 19/05/2015
  • Internal Examiners, Semester 1, Session 2014/2015 , Faculty, 17/02/2015
  • Lab Coordinator (Mechanical Engineering Program), Faculty, 06/02/2015
  • Quality Unit Committee for Mechanical Department, Faculty, 09/10/2014
  • Lab Coordinator (Mechanical Engineering Program), SEM1 2014/2015, Faculty, 01/09/2014 to 19/12/2014 (For KMEM1170, KMEM2172, KMEM3175 and JKE(KEEE2275))
  • Internal Examiners, Special Semester, 2013/2014 Session, Faculty, 20/08/2014 to 29/08/2014
  • Curriculum Review Committee for Mechanical Programme 2015, Faculty, 01/08/2014 to 25/08/2015
  • Panel-Candidature Defense Seminar (KHA080070), Faculty, 25/06/2014 to 25/06/2014 (Replacing Dr. Ong Hwai Chyuan who was on conference leave.)
  • Panel-Candidature Defense Seminar (KGA120008), Faculty, 25/06/2014 to 25/06/2014 (Replacing Dr. Chew Bee Teng who was on Emergency Leave)
  • Curriculum Review Committee for Mechanical Programme 2014, Faculty, 19/03/2014 to 31/07/2014

AREAS OF EXPERTISE
(Area).


  • Engineering Sciences, Mechanical Engineering (Vibration & Structural Dynamic; Force Identification (Inverse Problem); Instrumentation & Signal Processing)


RECENT SELECTED PUBLICATIONS
(Publication).


Article in Academic Journals

2019
  • Noroozi, S; Ong, ZC; Khoo, SY; Aslani, N; Sewell, P 2019. Dynamic characterisation of ossur Flex-Run prosthetic feet for a more informed prescription. PROSTHETICS AND ORTHOTICS INTERNATIONAL (ISI-Indexed)
  • Lim, HC; Ong, ZC; Ismail, Z; Khoo, SY 2019. A Performance Study of Controlled Impact Timing on Harmonics Reduction in Operational Modal Testing. JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME (ISI-Indexed)
  • Tam, JH; Ong, ZC; Ismail, Z; Ang, BC; Khoo, SY 2019. A new hybrid GA-ACO-PSO algorithm for solving various engineering design problems. INTERNATIONAL JOURNAL OF COMPUTER MATHEMATICS (ISI-Indexed)

2018
  • Tam, JH; Ong, ZC; Ismail, Z; Ang, BC; Khoo, SY; Li, WL 2018. Inverse identification of elastic properties of composite materials using hybrid GA-ACO-PSO algorithm. INVERSE PROBLEMS IN SCIENCE AND ENGINEERING (ISI-Indexed)
  • Tam, JH; Ong, ZC; Ismail, Z; Ang, BC; Khoo, SY 2018. Inverse Identification of Composite Material Properties by using a Two-Stage Fourier Method. EXPERIMENTAL MECHANICS (ISI-Indexed)
  • Hossain, MS; Ong, ZC; Ng, SC; Ismail, Z; Khoo, SY 2018. Inverse identification of impact locations using multilayer perceptron with effective time-domain feature. INVERSE PROBLEMS IN SCIENCE AND ENGINEERING (ISI-Indexed)
  • Ong, ZC; Seet, YC; Khoo, SY; Noroozi, S 2018. Development of an economic wireless human motion analysis device for quantitative assessment of human body joint. MEASUREMENT (ISI-Indexed)

2017
  • Chin, W. K., Ong, Z. C., Kong, K. K., Khoo, S. Y., Huang, Y. H., & Chong, W. T. (2017). Enhancement of Energy Harvesting Performance by a Coupled Bluff Splitter Body and PVEH Plate through Vortex Induced Vibration near Resonance. Applied Sciences, 7(9), 921. (ISI-Indexed)
  • Zainab, R., Chong W. T., Ong, Z. C., & Khoo S. Y. (2017). Energy Harvesting Based on a Novel Piezoelectric 0.7 PbZn0.3Ti0.7O3-0.3Na2TiO3 Nanogenerator. Energies, 10(5), 646. doi:10.3390/en10050646 (ISI-Indexed)
  • Sazzad, M.H., Ong, Z. C., Zubaidah, I., Khoo S. Y. (2017). A comparative study of vibrational response based impact force localization and quanti cation using radial basis function network and multilayer perceptron. Expert Systems with Applications, 85, 87-98. doi:10.1016/j.eswa.2017.05.027 (ISI-Indexed)
  • Tam, J. H., Ong, Z. C., Lau, C. L., Ismail, Z., Ang, B. C., & Khoo, S. Y. (2017). Identification of material properties of composite plates using Fourier-generated Frequency Response Functions. Mechanics of Advanced Materials and Structures, 1-10. ( DOI: 10.1080/15376494.2017.1365980) (ISI-Indexed)
  • Sazzad, M.H., Ong, Z.C, Ismail, Z., Noroozi, S., Khoo, S.Y. (2017). Artificial Neural Networks for Vibration Based Inverse Parametric Identifications: A Review, Applied Soft Computing, 52, 203-219. doi: 10.1016/j.asoc.2016.12.014 (ISI-Indexed)
  • Khoo, S.Y., Zainab, S. R.,Ong, Z. C., Huang, Y-H, Chong, W.T., Zubaidah, I. Structural Dynamics Effect on Voltage Generation from Dual Coupled Cantilever Based Piezoelectric Vibration Energy Harvester System. Measurement, 107, 41-52 (ISI-Indexed)

2016
  • Ong, Z.C., Lim, H.C., Khoo, S.Y., Rahman, A.G.A., Ismail, Z., Noroozi, S. An experimental investigation on the effects of exponential window and impact force level on harmonic reduction in Impact-synchronous Modal Analysis. Journal of Mechanical Science and Technology, 30(8), 3523-3523 (ISI/SCOPUS Indexed Publication)
  • Ong,Z.C., Lim, H.C., Khoo S.Y., Ismail, Z., Kong, K.K., Rahman, A.G.A. (2017). Assessment of the phase synchronization effect in modal testing during operation. Journal of Zhejiang University- SCIENCE A (Applied Physics & Engineering), 18(2), 92-105. (ISI-Indexed)
  • Tam,J.H., Ong, Z.C., Ismail, Z., Ang, B.C. and Khoo S.Y. (2016). Identification of material properties of composite materials using non-destructive vibrational evaluation approaches: A review. Mechanics of Advanced Materials and Structures, 24(12), 971-986. doi: 10.1080/15376494.2016.1196798 (ISI-Indexed)
  • Navid, A., Siamak, N., Khoo, S.Y., Alex, O.Z.C., & Christine M. (2016) Simulation of gait asymmetry and energy transfer efficiency between unilateral and bilateral amputees. Sports Engineering. DOI 10.1007/s12283-016-0202-1 (SCOPUS-Indexed)

2015
  • Mahmudur Rahman, Ong, Z.C., Chong, W.T., Sabariah J., Khoo, S.Y. 2015, Performance enhancement of wind turbine systems with vibration control: A review. Renewable and Sustainable Energy Reviews 51: 43-54 (ISI-Indexed)
  • Bakar, M.M.M., Ong, Z.C., Chong,W.T., Khoo,S.Y.,& Rahman,A.G.A. 2015. A Simplified Technique to Distinguish Unbalance and Misalignment using Frequency Domain Operating Deflection Shape,Jurnal Teknologi 76(8):1-4 (SCOPUS-Indexed)
  • Monajemi, H., Mazinani, I., Ong, Z. C., Khoo, S. Y., Kong, K. K., & Karim, R. (2015). Using local stiffness indicator to examine the effect of honeycombs on the flexural stiffness of reinforced concrete beams. Measurement, 64: 157-162. (ISI/SCOPUS Indexed Publication)

2014
  • Kong, K. K., Khoo, S. Y., Ong, Z. C., Eng, H. C., Ismail, Z., Chong, W. T.,Noroozi, S., & Rahman, A. G. A. (2014). Failure analysis of flow-induced vibration problem of in-serviced duplex stainless steel piping system in oil and gas industry. Materials Research Innovations, 18(S6): 417-422. (ISI-Indexed)
  • Kong, K. K., Ong, Z. C., Khoo, S. Y., Ismail, Z., Ang, B. C., Chong, W. T., Noroozi, S. & Rahman, A. G. A. (2014). Identification of material properties of orthotropic composite plate using hybrid non- destructive evaluation approach. Materials Research Innovations, 18(S6), 423-428. (ISI-Indexed)
  • Noroozi, S., Rahman, A.G.A., Khoo, S.Y., Zahedi, S., Sewell, P., Dyer, B., and Ong, Z.C. (2014). The Dynamic elastic response to impulse synchronisation (DERTIS) of composite prosthetic energy storing and returning feet. Proceedings of the Institution of Mechanical Engineers Part P: Journal of Sports Engineering and Technology, 228(1): p.24-32 (ISI/SCOPUS Indexed Publication)
  • Ismail, Z., Kong, K. K., Othman, S. Z., Law, K. H., Khoo, S. Y., Ong, Z. C., & Shirazi, S. M. (2014). Evaluating accidents in the offshore drilling of petroleum: Regional picture and reducing impact. Measurement, 51: 18-33. (ISI/SCOPUS Indexed Publication)
  • Ismail, Z., Kuan, K. K., Yee, K. S., & Chao, O. Z. (2014).Examining the trend in loss of flexural stiffness of simply supported RC beams with various crack severity using model updating. Measurement, 50: 43-49. (ISI/SCOPUS Indexed Publication)
  • Rahman, A.G.A, Khoo, S.Y., Ismail, Z, Kong, K.K., Ong, Z.C., Chong, W.T., Noroozi, S. 2014. Impact Force Identification Using The Modal Transformation Method in Collocated and Non- Collocated Cases. Journal of Mechanical Engineering and Sciences. 2289-4659 (6): 968-974. (Non-ISI/Non-SCOPUS)
  • Khoo, S.Y., Ismail, Z., Kong, K.K., Ong, Z.C., Noroozi, S., Chong, W.T., and Rahman, A.G.A. (2014) Impact force identification with pseudo- inverse method on a lightweight structure for under-determined, even- determined and over- determined cases. International Journal of Impact Engineering. 63: p. 52-62. (ISI/SCOPUS Indexed Publication)
  • Kong, K. K., Noroozi, S., Rahman, A. G. A., Dupac, M., Eng, H. C., Ong, Z. C., Khoo, S. Y. & Vinney, J. E. (2014) Non-destructive testing and assessment of dynamic incompatibility between third-party piping and drain valve systems: an industrial case study, Nondestructive Testing and Evaluation, 29(2):154-163 (ISI/SCOPUS Indexed Publication)
  • Khoo, S.Y., Ong, Z.C., Kong, K.K., Ismail, Z., Chong, W.T., Noroozi, S. & Rahman, A.G.A. 2014. Importance of Selecting a Suitable Analysis Frequency Range in Impact Force Identification for Automobile Test Rig. Applied Mechanics and Materials 663: 88-92. (SCOPUS-Indexed)

2013
  • Rahman, A.G.A., Khoo, S.Y., Ismail, Z., Chong, W.T., & Sewell, P., Dyer, B., and Ong, Z.C. Noroozi, S. (2013). Impact force identification by using modal transformation method for automobile test rig. Applied Mechanicals and Materials, 471: 102- 106. Switzerland: Trans Tech Publications. (SCOPUS-Indexed)
  • Ismail, Z., Salim, K., Othman, S. Z., Ramli, A. H., Shirazi, S. M., Karim, R., & Khoo, S. Y. (2013). Determining and comparing the levels of heavy metal concentrations in two selected urban river water. Measurement, 46(10): 4135-4144. (ISI/SCOPUS Indexed Publication)
Proceeding

2018
  • Lian Yee Cheng, Khoo Shin Yee, Ong Zhi Chao, Zubaidah Ismail, Chong Wen Tong, Siamak Noroozi (2018). Investigation of Oblique Impulse in Experimental Modal Analysis via Finite Element Method, 315th International Conference on Mechanical and Aerospace Engineering (ICMAE), Putrajaya, Malaysia. (Non-ISI/Non-SCOPUS)
  • Khoo Shin Yee, Lian Yee Cheng, Ong Zhi Chao, Zubaidah Ismail, Siamak Noroozi (2018). Time Effective Structural Frequency Response Testing with Oblique Impact, International Journal of Aerosace and Mechanical Engineering, 12(6), 613-617, 20th International Conference on Acoustics, Vibration and Noise Control Engineering (ICAVNCE), Venice, Italy. (Non-ISI/Non-SCOPUS)

2016
  • Zainab, S., Chong, W.T., Khoo,S.Y.,& Ong,Z.C. 2016. Novel PbZnTiO3-Na2TiO3 PZT-NT Soft Piezoelectric Transducers for Energy Harvesting Applications, International Conference on Engineering & Technology, Computer, and Basic & Applied Sciences (ECBA), Kuala Lumpur, Malaysia. 

2015
  • Bakar, M.M.M., Ong, Z.C., Chong,W.T., Khoo,S.Y.,& Rahman,A.G.A. 2015. A Simplified Technique to Distinguish Unbalance and Misalignment using Frequency Domain Operating Deflection Shape,The 4th International Conference on Advances in Mechanical Engineering (ICAME2015) (Non-ISI/Non-SCOPUS)
  • Hossain, M.S., Ong, Z.C., Khoo,S.Y.,& Ismal, Z. 2015. Impact Location Identification with Single Time Domain Feature and Radial Basis Function Network,International Conference on Mechanical, Manufacturing and Process Plant Engineering (ICMMPE 2015) (Non-ISI/Non-SCOPUS)

2014
  • Yap, H.T., Ong, Z.C., Chong,W.T., Kong,K.K., Khoo,S.Y., Ismail,Z. & Rahman,A.G.A. 2014. Design Optimisation of Shroud-Augmented Dual-Rotor Exhaust Air Energy Recovery Wind Turbine Generator Using Hybrid Non-destructive Evaluation Approach,The 6th International Conference on Applied Energy ICAE2014 (Non-ISI/Non-SCOPUS)

2013
  • Khoo, S.Y., Ong, Z.C., Kong, K.K., Ismail, Z., Chong, W.T., Noroozi, S., & Rahman, A.G.A. 2013. Importance of Selecting a Suitable Analysis Frequency Range in Impact Force Identification for Automobile Test Rig. Proceedings of the 2nd International Conference on Recent Advances in Automotive Engineering & Mobility Research (ReCAR), Kuala Lumpur, Malaysia 
  • Noroozi,S., Rahman,A.G.A, Vinney,J., Ong, Z.C., & Khoo, S.Y. 2013. Simulation of performance enhancement of bi-lateral lower-limb amputees through impulse synchronisation with self selected running step frequency. Proceeding of the 2th International Conference on Mechanical Engineering Research (ICMER), Pahang, Malaysia 
  • Kong, K.K., Khoo, S.Y., Ong, Z.C., Ismail,Z., Chong, W.T., Noroozi,S., & Rahman, A.G.A. 2013. Failure Analysis of Flow-Induced Vibration Problem of In- Serviced Duplex Stainless Steel Piping System in Oil and Gas Industry. Proceedings of the 1st International Conference on the Science & Engineering of Materials (ICoSEM), Kuala Lumpur, Malaysia 
  • Rahman, A.G.A, Khoo, S.Y., Ismail,Z., Chong W.T., & Siamak, N. 2013. Impact force identification in collocated and non-collocated cases by using modal transformation method. Proceeding of the 2th International Conference on Mechanical Engineering Research (ICMER), Pahang, Malaysia 
  • Kong, K.K., Ong, Z.C., Khoo, S.Y., Ismail, Z., Chong, W.T., Noroozi, S., & Rahman, A.G.A. 2013. Identification of Material Properties of Orthotropic Composite Plate using Hybrid Non-Destructive Evaluation Approach. Proceedings of the 1st International Conference on the Science & Engineering of Materials (ICoSEM), Kuala Lumpur, Malaysia 

2012
  • Rahman, A.G.A, Khoo, S.Y., Ismail, Z., Chong, W.T., & Noroozi, S. 2012. Impact force identification by using modal transformation method for automobile test rig. Proceeding of 4th International Conference on Noise, Vibration and Comfort (NVC), Kuala Lumpur, Malaysia 

AREAS OF RESEARCH
(Project title), (Role), (From)-(Until), (Level), (Source).


  • Bringing personalized learning via learning style preferences in coursework, Consultant, 2019 - 2020, RU Geran - ADEC, (National)
  • Sensor Data Diagnostic Algorithm Using Data Mining With Block Chain Technology For Secure And Reliable In-service Shm, Consultant, 2019 - 2021, Others MOHE - Top 100 (IIRG)-IISS, (National)
  • Investigation Of The Sensitivity In Frequency Response Vectors On Damage Propagation Under Stochastic Excitation, Consultant, 2018 - 2020, RU Geran - Fakulti Program, (National)
  • Design And Development Of A Mechanical Amplifier Structure For Piezoelectric Harvester In A High Force Road Environment, Principal Investigator(PI), 2018 - 2020, RU Geran - Fakulti Program, (National)
  • The Design, Simulation And Testing Of A Deflector System To Enhance The Aerodynamics Performance Of Cross Axis Wind Turbine, Consultant, 2017 - 2019, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC)), (University)
  • Design and Development of HODS (Human Operating Deflection Shape) System for quantitative assessment of body joints, Co-Investigator, 2016 - 2018, NEWTONUNGKU OMAR FUND-Newton Research Collaboration Programme (IF006-2016), (International)
  • Vibration Energy Harvesting On An Exhaust Air System With Dual-rotor Energy Recovery Wind turbine Generator By Using Piezoelectric Material, Principal Investigator(PI), 2015 - 2018, Postgraduate Research Grant (PPP) - Research, (National)
  • Design and development of vibration energy harvester for exhaust air energy recovery wind turbine generator using piezoelectric materials, Principal Investigator(PI), 2015 - 2017, Geran Penyelidikan Universiti Malaya (UMRG) - AET (Innovative Technology (ITRC)), (University)
  • Investigation Of Oblique Excitation Angle Effect In Impulse Technique For Structural Frequency Response Testing, Principal Investigator(PI), 2015 - 2019, Fundamental Research Grant Scheme (FRGS), (National)
  • Natural Fatigue Crack Identification of A Rotor Shaft by Using Acoustic Frequency-Response Technique With Artificial Neural Network Algorithm., Principal Investigator(PI), 2015 - 2017, Postgraduate Research Grant (PPP) - Research, (National)
  • Investigation of phase synchronization effect in Impact Synchronous Modal Analysis (ISMA) during operation, Co-Investigator, 2014 - 2017, Fundamental Research Grant Scheme (FRGS), (National)
  • Impact Force Identification by Using Translational and Rotational Vibration Modes, Principal Investigator(PI), 2014 - 2015, Bantuan Kecil Penyelidikan (BKP), (National)

AWARDS AND RECOGNITIONS
(Name of Award), (Awarding Institution), (Year Awarded), (Level).


  • Certification of Appreciation in Recognition of Reviewing Paper for International Journal of Automotive & Mechanical Engineering (Ijame), International Journal of Automotive & Mechanical Engineering (Ijame), 2019, (International)
  • Certificate of Participation as Judge in 'Begin Challenge 2019' Competition, University of Malaya, 2019, (National)
  • Certificate of Attending Emarald Teaching and Learning Program; , Academic Enhancement and Leadership Development Centre (Adec), 2019, (University)
  • Certificate of Excellent Service, University Malaya, 2019, (University)
  • 1 Certificate of Judge for Begin Competition 2018 and 1 Certificate of Participation for Mooc Workshop , Academic Enhancement and Leadership Development Centre, 2018, (Ptj)
  • Best Paper Award for Time Effective Structural Frequency Response Testing With Oblique Impact, International Scientific Research and Experimental Development, 2018, (International)
  • Acknowledgement and Appreciation Letter for Ctes Above 4.7 for The Master Course, Sem 2, 2016/2017, Tdid (Postgraduate Office), Faculty of Engineering, University of Malaya, 2017, (Department)
  • Course Certificate for Completing The "Machine Learning" Course Authorized by Stanford University, Coursera and Stanford Univerisity, 2017, (International)
  • Received 2 Certificate of Appreciations and 1 Certificate of Participant for Begin Competition 2016, Coaching Section and Program Transformasi Negara Respectively, Faculty of Engineering, UM, Kolej Kediaman Tuanku Bahiyah, UM & Biro Tatanegara, Jabatan Perdana Menteri, 2016, (Ptj)
  • Received Certificate of Appreciation from 4 Coaching Sessions Organised by Faculty of Engineering, UM, Faculty of Engineering, UM, 2015, (University)
  • Received Certificate and Techkit from Train The Trainer (Ttt) Program in Year 2015, National Instruments, 2015, (National)
  • Um Excellence Award, Naib Canselor, 2014, (University)
  • University of Malaya Excellent Award 2014, University of Malaya, 2014, (University)
  • Gold Prize (Light-Glowry): Innovative Green Energy Powered Lighting and Emergency Beacon System), International Engineering Invention & Innovation Exhibition (I-Envex), 11-13 April 2014., Universiti Malaysia Perlis, 2014, (National)
  • Anugerah Cemerlang University Malaya (Complete Phd Within 3 Years), University of Malaya (UM), 2013, (University)
  • Um Bright Spark, University of Malaya (UM), 2011, (University)
  • Um Fellowship, University of Malaya (UM), 2011, (University)

PRESENTATIONS
(Title), (Event), (Date Presented), (Organiser), (Level).


PRESENTER
  • Impact force identification by using modal transformation method for automobile test rig, 4th International Conference on Noise Vibration and Comfort (NVC 2012), 2012-12-27 to 2012-12-27, Society of Vibration and Acoustics Malaysia, (International)
  • Impact force identification in collocated and non-collocated cases by using modal transformation method, 2nd International Conference on Mechanical Engineering Research, 2013-07-02 to 2013-07-02, (International)
  • Importance of Selecting a Suitable Analysis Frequency Range in Impact Force Identification for Automobile Test Rig, 2nd International Conference on Recent Advances in Automotive Engineering & Mobility Research (ReCAR 2013), 2013-12-18 to 2013-12-18, (International)
INVITED SPEAKER
  • An Alternative Way of Impact Force Identification on Lightweight Structure, Research Talk, 2014-05-09 to 2014-05-09, Department of Mechanical Engineering, University of Malaya, (University)
  • An Application of Vibration Analysis: Inverse Force Identification, Research Talk, 2015-05-29 to 2015-05-29, Department of Mechanical Engineering, University of Malaya, (University)
  • Determination of unknown impact force from accelerometers, Research Talk, 2017-04-12 to 2017-04-12, Department of Mechanical Engineering, University of Malaya, (University)

EVALUATION ACTIVITIES
(Description), (Evaluation Activity),(Year).


  • Reviewed a manuscript for Measurement Science and Technology (ISSN: 0957-0233) on 5 March 2019., Article In Journal ,  (2019 - 2019)
  • Reviewed a manuscript for Measurement (ISSN: 0263-2241) on 22 May 2019, Article In Journal ,  (2019 - 2019)
  • Reviewed a manuscript for Measurement Science and Technology (ISSN: 0957-0233) on 6 April 2019., Article In Journal ,  (2019 - 2019)
  • Reviewed a manuscript for Journal of composite materials (ISSN: 0021-9983) on 27 Jan 2019., Article In Journal ,  (2019 - 2019)
  • Reviewed a manuscript for Experimental Mechanics (ISSN: 0014-4851) on 23 Jan 2019., Article In Journal ,  (2019 - 2019)
  • Reviewed a manuscript for Inverse Problems in Science & Engineering (ISSN: 1741-5977) on 22 Jan 2019., Article In Journal ,  (2019 - 2019)
  • Reviewed a manuscript for International Journal of Automotive and Mechanical Engineering (ISSN: 2229-8649 ) on 04 Jan 2019., Article In Journal ,  (2019 - 2019)
  • Reviewed a manuscript for Inverse Problems in Science & Engineering (ISSN: 1741-5977) on 22 May 2018., Article In Journal ,  (2018 - 2018)
  • Reviewed a manuscript for Measurement Science and Technology (ISSN: 0957-0233) on 12 May 2018., Article In Journal ,  (2018 - 2018)
  • Reviewed a manuscript for Journal of Engineering Science & Technology (ISSN: 1823-4690) on 11 July 2018., Article In Journal ,  (2018 - 2018)
  • Examined master thesis by master student SAKTIYARAMANA KARPAYAH (KQK160012) as an Internal Examiner on 08 August 2018., Thesis ,  (2018 - 2018)
  • Examined master thesis by master student Mohamad Izzudin Bin Hussein Shah (KQK160023) as an Internal Examiner on 25 April 2018., Thesis ,  (2018 - 2018)
  • Reviewed a manuscript for Measurement Science and Technology (ISSN: 0957-0233) on 31 Oct 2018., Article In Journal ,  (2018 - 2018)
  • Reviewed a manuscript for Measurement Science and Technology (ISSN: 0957-0233) on 13 June 2018., Article In Journal ,  (2018 - 2018)
  • Examined master thesis by master student (ADVIN PHANG KOK SENG (KQJ170001)) as an Internal Examiner on 08 August 2018., Thesis ,  (2018 - 2018)
  • Reviewed a manuscript for Smart Materials and Structure (ISSN: 0964-1726) on 07 August 2018, Article In Journal ,  (2018 - 2018)
  • Reviewed a manuscript for Inverse Problems in Science & Engineering (ISSN: 1741-5977) on 15 April 2018., Article In Journal ,  (2018 - 2018)
  • Reviewed a manuscript for Measurement Science and Technology (ISSN: 0957-0233) on 29 April 2018., Article In Journal ,  (2018 - 2018)
  • Reviewed a manuscript for Measurement Science and Technology (ISSN: 0957-0233) on 20 March 2018., Article In Journal ,  (2018 - 2018)
  • Reviewed a manuscript for Journal of Engineering Science & Technology (ISSN: 1823-4690) on 29 April 2018., Article In Journal ,  (2018 - 2018)
  • Reviewed a manuscript for Measurement Science and Technology (ISSN: 0957-0233) on 14 January 2018., Article In Journal ,  (2018 - 2018)
  • Reviewed a manuscript for 2nd Malaysia University-Industry Green Building Collaboration Symposium MU-IGBC 2018 on 6 April 2018., Article In Proceeding ,  (2018 - 2018)
  • Reviewed a manuscript for Inverse Problems in Science & Engineering (ISSN: 1741-5977) on 6 Jan 2017., Article In Journal ,  (2017 - 2017)
  • Reviewed a manuscript for Surface Review and Letters (SRL) (ISSN: 1793-6667) on 6 August 2017., Article In Journal ,  (2017 - 2017)
  • Reviewed a manuscript for Inverse Problems in Science & Engineering (ISSN: 1741-5977) on 20 August 2017, Article In Journal ,  (2017 - 2017)
  • Reviewed a manuscript for Journal of Physics D: Applied Physics (ISSN: 0022-3727) on 8 April 2017., Article In Journal ,  (2017 - 2017)
  • Reviewed a manuscript for Journal of Physics D: Applied Physics (ISSN: 0022-3727) on 19 June 2017., Article In Journal ,  (2017 - 2017)
  • Reviewed a manuscript for Measurement Science and Technology (ISSN: 0957-0233) on 23 May 2017., Article In Journal ,  (2017 - 2017)
  • Reviewed a manuscript for Mechanical Systems and Signal Processing (ISSN: 0888-3270) on 15 October 2016, Article In Journal ,  (2016)
  • Reviewed a manuscript for Mechanical Systems and Signal Processing (Publisher: Elsevier; ISSN: 0888-3270) on 5 August 2016, Article In Journal ,  (2016)
  • Reviewed conference papers (Paper 1) for ICEDA2016 (International Conference on Engineering Design and Analaysis on 8 June 2016, Article In Proceeding ,  (2016)
  • Reviewed a conference paper (Paper 2) for ICEDA2016 (International Conference on Engineering Design and Analaysis on 8 June 2016, Article In Proceeding ,  (2016)
  • Reviewed a manuscript for Jurnal Teknologi (Science and Technology) (Publisher: Penerbit Universiti Teknologi Malaysia; ISSN: 21803722) on 16 May 2016, Article In Journal ,  (2016)
  • Internal Examiner (M.Eng.) - IMTENAN SAYEED (KGA120014)- EXPERIMENTAL EVALUATION OF OXYGENATED ADDITIVES ON IMPROVING BIODIESEL-DIESEL BLENDS FUELLING DIESEL ENGINES, Thesis ,  (2015)
  • Reviewed a manuscript for Inverse Problems in Science & Engineering (Publisher: Taylor & Francis; ISSN: 1741-5977) on 21 Aug 2015, Article In Journal ,  (2015)
  • Reviewed a manuscript for JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (Publisher: ASME; ISSN: 1048-9002) on 05 Feb 2015, Article In Journal ,  (2015)
  • Reviewed a manuscript for Mathematical Problems in Engineering (Publisher: HINDAWI PUBLISHING CORPORATION; ISSN: 1024-123X) on 07 May 2015, Article In Journal ,  (2015)
  • Reviewed a manuscript for Inverse Problems in Science & Engineering (Publisher: Taylor & Francis; ISSN: 1741-5977) on 3 Feb 2015, Article In Journal ,  (2015)
  • Reviewed a manuscript for JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (Publisher: ASME; ISSN: 1048-9002) on 19 April 2014, Article In Journal ,  (2014)
  • Reviewed a manuscript for Journal of Zhejiang University-SCIENCE A (Publisher: ZHEJIANG UNIV; ISSN: 1673-565X) on 8 Dec 2014, Article In Journal ,  (2014)

CONTRIBUTION TO SOCIETY
(Contribution To Society), (Level), (Start Date), (End Date).


  • Judge for begin challenge competition day 2019, (National), 24/04/2019 until 24/04/2019
  • Judge for begin challenge competition day 2018, (National), 08/04/2018 until 11/04/2018
  • Judge for begin challenge competition day 2017, (National), 03/05/2017 until 03/05/2017
  • Moderator for Engenius 2016, (University), 18/05/2016 until 18/05/2016
  • MENTOR for SAM Bestari team- PROGRAM BEYOND ENGINEERING INNOVATION (BEGIN) CHALLENGE 2016, (National), 09/03/2016 until 25/05/2016
  • Mentor for SMKSBU team-10th Regional Congress Search for SEAMEO Young Scientists (SSYS), (International), 07/03/2016 until 07/03/2016
  • Exhibitor - Open Day Program for Engineering Faculty of Malaya University, (National), 18/08/2015 until  
  • MENTOR for SMKSBU team- PROGRAM BEYOND ENGINEERING INNOVATION (BEGIN) CHALLENGE 2015 , (National), 11/03/2015 until 29/04/2015
  • Technical committee for ICAME2015 (4th International Conference on Advances in Mechanical Engineering 2015), (International), 27/11/2014 until 27/08/2014
  • Exhibitor - i-ENVEX 2014, (National), 11/04/2014 until 13/04/2014

SUPERVISION


FIRST DEGREE/DIPLOMA/PRE-DEGREE
(Course Title), (Academic Session), (No. of Candidates)

Completed
  • Motor Force Identification By Using Inertial measurement unit (IMU) For Accurate Forced Response Analysis, 2018/2019, 1
  • Design of Waste Sorting System using Multiple Inputs Neural Network Model, 2018/2019, 1
  • Development of a Smart Drone with Object Detection Abilities to Locate Plastic Bottle Waste in the Ocean, 2018/2019, 1
  • Development of impact Force Identification Using Oblique Remote Sensor, 2018/2019, 1
  • Development of Piezoelectric Vibration Harvester for High Force Environement, 2018/2019, 1
  • Development of Wind Energy Harvester by Using Piezoelectric Material, 2015/2016, 1
  • Identification of Dynamic Elastic Properties of Timber Structure by Using Vibration Technique, 2015/2016, 1
  • Accuracy Enhancement of 3D Structural Translation and Tilt Measurement Using MEMs Based 3-Axis Accelerometer via Sensor Fusion and Kalman Filtering, 2015/2016, 1
  • 3D Structural Translation and Rotation Measurement Using MEMs Based 3-Axis Accelerometer, 2014/2015, 1
  • Application of Hilbert Transform in Enhancing Modal Parameter Estimation Result for Automobile Test Rig, 2014/2015, 1
  • Investigation of Beating Effect in Operating Deflection Shape Analysis for Multiple-Motor System, 2014/2015, 1
POST GRADUATE STUDENT
(Name of Degree), (Name of Candidates), (Title of Thesis), (Academic Session)

Ongoing
  • Doctoral Degree (phd), Fahad Bin Zahid, ENHANCEMENT OF IMPACT-SYNCHRONOUS MODAL ANALYSIS (ISMA) USING AUTO IMPACT DEVICE (AID), 2018/2019
  • Master Degree, Mazlyne Binti Mat Akat, Rotational Natural Frequency Identification of A Rotor-Shaft System By Using Inertial Measurement Unit, 2018/2019
  • Master Degree, Jahangir Hassan Khan, IoT Based IMU Sensor Network For Human Arm Pose Estimation, 2018/2019
  • Doctoral Degree (phd), Su Xian Long, DEVELOPMENT OF A MECHANICAL AMPLIFIER STRUCTURE FOR PIEZOELECTRIC TRANSDUCER IN HIGH FORCE ENVIRONMENT, 2018/2019
  • Master Degree, Wang Yanru, A COMPARATIVE STUDY OF VIBRATIONAL RESPONSE BASED IMPACT FORCE LOCALIZATION AND QUANTIFICATION USING DIFFERENT TYPES OF NEURAL NETWORKS, 2017/2018
  • Doctoral Degree (phd), Zainab Shakir Radeef, Vibration Energy Harvesting on a Exhaust Air System with Dual-Rotor Energy Recovery Wind Turbine Generator by using Piezoelectric Material, 2017/2018
  • Doctoral Degree (phd), Lim Hong Cheet, Development of Automated Impact Device based on Phase Synchronisation Assessment for the Enhancement of Impact-Synchronous Modal Analysis during Operation, 2017/2018
  • Doctoral Degree (phd), Lian Yee Cheng, INVESTIGATION OF OBLIQUE EXCITATION ANGLE EFFECT ON IMPULSE TECHNIQUE IN PRODUCING TIME AND COST EFFECTIVE STRUCTURAL FREQUENCY RESPONSE TESTING, 2017/2018

Completed
  • Master Degree, Md Sazzad Hossain, Artificial Neural Network Application in Non-collocated Impact Force Identification Using Appropriate Time-domain Feature and Network, 2015/2016

TEACHING
(Course Title), (Academic Session), (No of Student), (No of Contact Hours).


POST GRADUATE
  • ANALYSIS OF APPLIED ENGINEERING, 2018/2019(1), 35, 42
  • NOISE AND VIBRATION, 2018/2019(1), 13, 42
  • NOISE AND VIBRATION, 2017/2018(1), 25, 16
  • APPLIED MECHANICS, 2016/2017(2), 2, 42
  • APPLIED MECHANICS, 2016/2017(2), 28, 42
  • APPLIED MECHANICS, 2015/2016(2), 25, 42
FIRST DEGREE
  • INDUSTRIAL PROJECT, 2018/2019(1), 2, 0
  • ENGINEERING MATHEMATICS 1, 2018/2019(1), 95, 42
  • ACOUSTICS AND NOISE CONTROL, 2018/2019(1), 41, 42
  • MECHANICAL ENGINEERING LABORATORY I & COMMUNICATION, 2017/2018(1), 202, 0
  • MECHANICAL ENGINEERING LABORATORY V, 2017/2018(1), 97, 0
  • APPLIED VIBRATION, 2017/2018(1), 29, 42
  • MECHANICAL ENGINEERING LABORATORY 1 AND COMMUNICATION, 2017/2018(1), 1, 0
  • MECHANICAL ENGINEERING LABORATORY III, 2017/2018(1), 110, 0
  • ENGINEERING MATHEMATICS 1, 2017/2018(1), 110, 42
  • MECHANICAL ENGINEERING LABORATORY III, 2016/2017(1), 94, 0
  • MECHANICAL ENGINEERING LABORATORY I & COMMUNICATION, 2016/2017(1), 126, 0
  • MECHANICAL ENGINEERING LABORATORY II & COMMUNICATION, 2016/2017(2), 125, 0
  • ENGINEERING MATHEMATICS 1, 2016/2017(1), 416, 42
  • MECHANICS OF MATERIALS I, 2016/2017(2), 46, 42
  • MECHANICAL ENGINEERING LABORATORY V, 2016/2017(1), 63, 0
  • BASIC ENGINEERING ALGEBRA, 2016/2017(1), 47, 39
  • MECHANICAL ENGINEERING LABORATORY IV, 2016/2017(2), 91, 0
  • BASIC ENGINEERING ALGEBRA, 2015/2016(2), 194, 39
  • MECHANICAL ENGINEERING LABORATORY II, 2015/2016(2), 92, 0
  • MECHANICAL ENGINEERING LABORATORY IV, 2015/2016(2), 63, 0
  • BASIC ENGINEERING ALGEBRA, 2015/2016(1), 292, 39
  • MECHANICAL ENGINEERING LABORATORY III, 2015/2016(1), 63, 0
  • ENGINEERING DRAWING & COMPUTER AIDED DESIGN, 2015/2016(2), 92, 42
  • MECHANICAL ENGINEERING LABORATORY V, 2015/2016(1), 41, 0
  • CALCULATION AND NUMERICAL METHOD, 2015/2016(1), 54, 28
  • MECHANICAL ENGINEERING LABORATORY 1 AND COMMUNICATION, 2015/2016(1), 92, 0
  • BASIC ENGINEERING ALGEBRA, 2014/2015(2), 89, 39
  • BASIC ENGINEERING ALGEBRA, 2014/2015(3), 32, 28
  • MECHANICAL ENGINEERING LABORATORY V, 2014/2015(1), 51, 0
  • CALCULATION AND NUMERICAL METHOD, 2014/2015(1), 44, 39
  • MECHANICAL ENGINEERING LABORATORY 1 AND COMMUNICATION, 2014/2015(1), 60, 0
  • MECHANICAL ENGINEERING LABORATORY IV, 2014/2015(2), 41, 0
  • MECHANICAL ENGINEERING LABORATORY II, 2014/2015(2), 61, 0
  • MECHANICAL ENGINEERING LABORATORY III, 2014/2015(1), 50, 0
  • PRODUCTION AND OPERATION MANAGEMENT, 2013/2014(2), 52, 42
  • CALCULATION AND NUMERICAL METHOD, 2013/2014(3), 1, 30
  • MECHANIC VIBRATION, 2010/2011(1), 72, 42