PERSONAL DETAIL


Associate Prof. Dr. Md. Abul Kalam

Department of Mechanical Engineering
Faculty of Engineering
 
  +603-79674459
  +603-79675317
  kalam@um.edu.my
  Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, MALAYSIA
 
ResearcherID Link
  http://www.researcherid.com/rid/B-8995-2010


BIBLIOMETRIC DATA


 Total Articles in Publication List  201
 Articles With Citation Data  201
 Sum of the Times Cited   4434
 Average Citations per Article   22.06
 h-index   41
 Co-authors   Collaboration Network
 This information is generated from http://researcherid.com

BIOGRAPHY


Dr. Md. Abul Kalam is working as  an Associate Professor in the Department of Mechanical Engineering, University of Malaya since Sept 2015 to date.  His research specialization is on Internal-combustion  engine, Biodiesel/Biofuel, Lubricant testing and Engine Tribology.
Dr. Kalam obtained his undergraduate degree from Bangladesh Institute of Technology (B.I.T) Khulna, Bangladesh, (Presently known as KUET, Bangladesh), and  Master & Ph.D. from University of Malaya.
 


ACADEMIC QUALIFICATION
(Qualification), (Institution).



PROFESSIONAL
(Organisation), (Role), (Year), (Level).


  • INSTITUTION OF ENGINEERS, BANGLADESH (IEB)., Member, 1998 to 2018, (International)
  • PKAUM, Member, 2008 to 2017, (National)
  • MALAYSIAN TRIBOLOGY SOCIETY (MYTRIBOS), Member, 2009, (National)
  • SOCIETY OF AUTOMOTIVE ENGINEERS (SAE), USA., Member, 2009 to 2017, (International)
  • Sarjana M.Eng., Department of Mechanical Eng., UM, Committee Member, 2011, (University)
  • ENGINEERING ACCREDITATION COUNCIL (EAC), DEPARTMENT OF MECHANICAL ENG., UNIVERSITY OF MALAYA (UM), MALAYSIA., Committee Member, 2011 to 2017, (University)
  • Ijazah Tinggi., Department of Mechanical Eng., UM, Committee Member, 2011, (University)
  • OUTCOME-BASED EDUCATION (OBE), DEPARTMENT OF MECHANICAL ENG., UNIVERSITY OF MALAYA (UM), Committee Member, 2011, (University)
  • Institution of Mechanical Engineers, UK, Chartered Engineer, 2013 to 2018, (International)

ADMINISTRATIVE DUTIES
(Role), (Level), (Start date),(End Date).


  • Project Evaluation (Given by Ippp), University Malaya, 18/04/2016 to 30/06/2016 (ok)
  • Chairman -Jawatankuasa Penilaian Spesifikasi Teknikal Dan Harga, Department of Mechanical Engineering, Faculty of Engineering, 11/03/2016 to 11/03/2016 (in Dept dept)
  • Programme Coordinator, Department of Mechanical Engineering, Faculty of Engineering, 01/01/2016 to 31/08/2017 (PEO-Chapter coordinator for Mechanical Programme)
  • Chairman, Department of Mechanical Engineering, Faculty of Engineering, 02/01/2015 to 24/12/2015 (Role: Chairman in Candidature defense : 4 times in year 2015)
  • Chairman-Candidature Defense, Department of Mechanical Engineering, Faculty of Engineering, 26/06/2013 to 26/06/2013 (Chairman of a progress report presentation by Loong Ying Tai KGA110085 on 26th June 2013)
  • Representative of Ph.D. (Industrial)., Department of Mechanical Engineering, Faculty of Engineering, 07/09/2011 to 06/09/2015 (- Representative of Ph.D. (Industrial) for Mechanical Engineering Department)
  • E-Moodle System Representive (Mech.Eng.), Department of Mechanical Engineering, Faculty of Engineering, 20/12/2009 to 02/11/2015 (E-Learning Representative from Mechanical Engineering Department.)
  • Representive of Biofuel and Renewable Energy Unit, Department of Mechanical Engineering, Faculty of Engineering, 10/10/2009 to 02/02/2015 (Head: Biofuel and Renewable energy unit of \\\"Centre for Energy Sciences\\\". )
  • Member " Quality Committee", Department of Mechanical Engineering, Faculty of Engineering, 11/01/2008 to 02/11/2014 (-Manage document and matter related quality management/ ISO/OBE/SAR/Audit Accreditation (EAC).)

AREAS OF EXPERTISE
(Area).


  • Engineering Sciences, Mechanical Engineering (Lubricity, Tribology,)
  • Environmental Sciences,  (CO2, HC, CO, NOx)
  • Combustion and Fuel Engineering (Internal combustion engine, Biofue/biodiesel combustion, Biolubricant, NGV, Exhaust Emission, Engine Tribology.)


RECENT SELECTED PUBLICATIONS
(Publication).


Chapter in Book

2013
  • M. Shahabuddin, H.H. Masjuki and M.A. Kalam, 2013. Development of Eco-Friendly Biodegradable Biolubricant Based on Jatropha Oil,Ch: 8, pp. 1-12.Tribology in Engineering, Ed. Ha�im Pihtili,InTech, ISBN 978-953-51- 1126-9 

2011
  • M.A.Kalam and H.H. Masjuki, Experimental Test of a Diesel Engine using Envo-Diesel as an Alternative Fuel, Trends and Developments in Automotive Engineering, ISBN 978-953-7619-X-X published by INTECH, Jan 2011, P1-10. 

2008
  • M. A. Kalam, H. H. Masjuki, H. Ramang, M.Syazly, M. Redzuan and T.M.I Mahlia, Palm Oil Diesel Production and Its Experimental Test on a Diesel Engine, Hand book of Plant-Based Biofuels published by Taylor and Francis Group, CRC press, Boca Raton, FL 33487, USA., 2008, pp. 225-240. (ISI-Indexed)

2004
  • M. A. Kalam, H. H. Masjuki, M.A. Maleque, M. A. Amalina, H. Abdesselam, and T.M.I. Mahlia, Air -Fuel Ratio Calculation for a Natural Gas Fuelled Spark Ignition Engine, SAE International (USA). Book Number: SP-1863, 2004-01-0640 [ISBN 0-7680-1399-2]. 
Article in Academic Journals

2017
  • Zahid, R; Hassan, MB; Alabdulkarem, A; Varman, M; Mufti, RA; Kalam, MA; Zulkifli, NWBM; Gulzar, M; Lee, T 2017. Investigation of the tribochemical interactions of a tungsten-doped diamond-like carbon coating (W-DLC) with formulated palm trimethylolpropane ester (TMP) and polyalphaolefin (PAO). RSC ADVANCES (ISI-Indexed)
  • Kalam, MA; Masjuki, HH; Cho, HM; Mosarof, MH; Mahmud, MI; Chowdhury, MA; Zulkifli, NWM 2017. Influences of thermal stability, and lubrication performance of biodegradable oil as an engine oil for improving the efficiency of heavy duty diesel engine. FUEL (ISI-Indexed)
  • Khuong, LS; Masjuki, HH; Zulkifli, NWM; Mohamad, EN; Kalam, MA; Alabdulkarem, A; Arslan, A; Mosarof, MH; Syahir, AZ; Jamshaid, M 2017. Effect of gasoline-bioethanol blends on the properties and lubrication characteristics of commercial engine oil. RSC ADVANCES (ISI-Indexed)
  • Imdadul, HK; Rashed, MM; Shahin, MM; Masjuki, HH; Kalam, MA; Kamruzzaman, M; Rashedul, HK 2017. Quality improvement of biodiesel blends using different promising fuel additives to reduce fuel consumption and NO emission from CI engine. ENERGY CONVERSION AND MANAGEMENT (ISI-Indexed)
  • Rashedul, HK; Kalam, MA; Masjuki, HH; Teoh, YH; How, HG; Monirul, IM; Imdadul, HK 2017. Attempts to minimize nitrogen oxide emission from diesel engine by using antioxidant-treated diesel-biodiesel blend. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (ISI-Indexed)
  • Imdadul, HK; Zulkifli, NWM; Masjuki, HH; Kalam, MA; Kamruzzaman, M; Rashed, MM; Rashedul, HK; Alwi, A 2017. Experimental assessment of non-edible candlenut biodiesel and its blend characteristics as diesel engine fuel. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (ISI-Indexed)
  • Gulzar, M; Masjuki, HH; Alabdulkarem, A; Kalam, MA; Varman, M; Zulkifli, NWM; Zahid, R; Yunus, R 2017. Chemically active oil filter to develop detergent free bio-based lubrication for diesel engine. ENERGY (ISI-Indexed)
  • Imdadul, HK; Masjuki, HH; Kalam, MA; Zulkifli, NWM; Kamruzzaman, M; Shahin, MM; Rashed, MM 2017. Evaluation of oxygenated n-butanol-biodiesel blends along with ethyl hexyl nitrate as cetane improver on diesel engine attributes. JOURNAL OF CLEANER PRODUCTION (ISI-Indexed)
  • Monirul, IM; Kalam, MA; Masjuki, HH; Zulkifli, NWM; Shahir, SA; Mosarof, MH; Ruhul, AM 2017. Influence of poly(methyl acrylate) additive on cold flow properties of coconut biodiesel blends and exhaust gas emissions. RENEWABLE ENERGY (ISI-Indexed)

2016
  • Shuhimi, F. F., Bin Abdollah, M. F., Kalam, M. A., Hassan, M., Mustafa, A., Amiruddin, H. 2016. Tribological characteristics comparison for oil palm fibre/epoxy and kenaf fibre/epoxy composites under dry sliding conditions Tribology International (ISI-Indexed)
  • Masjuki, H. H., Ruhul, A. M., Mustafi, N. N., Kalam, M. A., Arbab, M. I., Fattah, I. M. R. 2016. Study of production optimization and effect of hydroxyl gas on a CI engine performance and emission fueled with biodiesel blends International Journal of Hydrogen Energy (ISI-Indexed)
  • Kalam, M. A., Rashed, M. M., Imdadul, H. K., Masjuki, H. H. 2016. Property development of fatty acid methyl ester from waste coconut oil as engine fuel Industrial Crops and Products (ISI-Indexed)
  • Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Alabdulkarem, A., Rashed, M. M., Ashraful, A. M. 2016. Influences of ignition improver additive on ternary (diesel-biodiesel-higher alcohol) blends thermal stability and diesel engine performance Energy Conversion and Management (ISI-Indexed)
  • Gulzar, M., Masjuki, H. H., Kalam, M. A., Varman, M., Zulkifli, N. W. M., Mufti, R. A., Zahid, R. 2016. Tribological performance of nanoparticles as lubricating oil additives Journal of Nanoparticle Research (ISI-Indexed)
  • Ruhul, M. A., Abedin, M. J., Rahman, S. M. A., Masjuki, B. H., Alabdulkarem, A., Kalam, M. A., Shancita, I. 2016. Impact of fatty acid composition and physicochemical properties of Jatropha and Alexandrian laurel biodiesel blends: An analysis of performance and emission characteristics Journal of Cleaner Production (ISI-Indexed)
  • Arslan, A., Masjuki, H. H., Varman, M., Abul Kalam, M., Quazi, M. M., Mosarof, M. H. 2016. Effect of change in temperature on the tribological performance of micro surface textured DLC coating Journal of Materials Research (ISI-Indexed)
  • Shancita, I., Masjuki, H. H., Kalam, M. A., Reham, S. S., Shahir, S. A. 2016. Comparative Analysis on Property Improvement Using Fourier Transform Infrared Spectroscopy (FT-IR) and Nuclear Magnetic Resonance (NMR) (H-1 and C-13) Spectra of Various Biodiesel Blended Fuels Energy Fuels (ISI-Indexed)
  • Abedin, M. J., Imran, A., Masjuki, H. H., Kalam, M. A., Shahir, S. A., Varman, M., Ruhul, A. M. 2016. An overview on comparative engine performance and emission characteristics of different techniques involved in diesel engine as dual-fuel engine operation Renewable Sustainable Energy Reviews (ISI-Indexed)
  • Rashed, M. M., Kalam, M. A., Masjuki, H. H., Habibullah, M., Imdadul, H. K., Shahin, M. M., Rahman, M. M. 2016. Improving oxidation stability and NOX reduction of biodiesel blends using aromatic and synthetic antioxidant in a light duty diesel engine Industrial Crops and Products (ISI-Indexed)
  • Wakil, M. A., Kalam, M. A., Masjuki, H. H., Fattah, I. M. R. 2016. Rice bran: A prospective resource for biodiesel production in Bangladesh International Journal of Green Energy (ISI-Indexed)
  • Rashed, M. M., Masjuki, H. H., Kalam, M. A., Alabdulkarem, A., Rahman, M. M., Imdadul, H. K., Rashedul, H. K. 2016. Study of the oxidation stability and exhaust emission analysis of Moringa olifera biodiesel in a multi-cylinder diesel engine with aromatic amine antioxidants Renewable Energy (ISI-Indexed)
  • Ruhul, A. M., Kalam, M. A., Masjuki, H. H., Alabdulkarem, A., Atabani, A. E., Fattah, I. M. R., Abedin, M. J. 2016. Production, characterization, engine performance and emission characteristics of Croton megalocarpus and Ceiba pentandra complementary blends in a single-cylinder diesel engine Rsc Advances (ISI-Indexed)
  • Abedin, M. J., Kalam, M. A., Masjuki, H. H., Sabri, M. F. M., Rahman, S. M. A., Sanjid, A., Fattah, I. M. R. 2016. Production of biodiesel from a non-edible source and study of its combustion, and emission characteristics: A comparative study with B5 Renewable Energy (ISI-Indexed)
  • Sanjid, A., Kalam, M. A., Masjuki, H. H., Varman, M., Zulkifli, N., Abedin, M. J. 2016. Performance and emission of multi-cylinder diesel engine using biodiesel blends obtained from mixed inedible feedstocks Journal of Cleaner Production (ISI-Indexed)
  • Rashed, M. M., Kalam, M. A., Masjuki, H. H., Mofijur, M., Rasul, M. G., Zulkifli, N. W. M. 2016. Performance and emission characteristics of a diesel engine fueled with palm, jatropha, and moringa oil methyl ester Industrial Crops and Products (ISI-Indexed)
  • Mosarof, M. H., Kalam, M. A., Masjuki, H. H., Alabdulkarem, A., Ashraful, A. M., Arslan, A., Rashedul, H. K., Monirul, I. M. 2016. Optimization of performance, emission, friction and wear characteristics of palm and Calophyllum inophyllum biodiesel blends Energy Conversion and Management (ISI-Indexed)
  • Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Alabdulkarem, A., Rashed, M. M., Teoh, Y. H., How, H. G. 2016. Higher alcohol-biodiesel-diesel blends: An approach for improving the performance, emission, and combustion of a light-duty diesel engine Energy Conversion and Management (ISI-Indexed)
  • Shancita, I., Masjuki, H. H., Kalam, M. A., Reham, S. S., Ruhul, A. M., Monirul, I. M. 2016. Evaluation of the characteristics of non-oxidative biodiesels: a FAME composition, thermogravimetric and IR analysis Rsc Advances (ISI-Indexed)
  • Mosarof, M. H., Kalam, M. A., Masjuki, H. H., Alabdulkarem, A., Habibullah, M., Arslan, A., Monirul, I. M. 2016. Assessment of friction and wear characteristics of Calophyllum inophyllum and palm biodiesel Industrial Crops and Products (ISI-Indexed)
  • Ahmed, A., Masjuki, H. H., Varman, M., Kalam, M. A., Habibullah, M., Al Mahmud, K. A. H. 2016. An overview of geometrical parameters of surface texturing for piston/cylinder assembly and mechanical seals Meccanica (ISI-Indexed)
  • Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Alabdulkarem, A., Kamruzzaman, M., Rashed, M. M. 2016. A comparative study of C-4 and C-5 alcohol treated diesel-biodiesel blends in terms of diesel engine performance and exhaust emission Fuel (ISI-Indexed)
  • Rashed, M. M., Masjuki, H. H., Kalam, M. A., Alabdulkarem, A., Imdadul, H. K., Rashedul, H. K., Shahin, M. M., Habibullah, M. 2016. A comprehensive study on the improvement of oxidation stability and NOx emission levels by antioxidant addition to biodiesel blends in a light-duty diesel engine Rsc Advances (ISI-Indexed)
  • Islam, MT; Abdullah, AB; Shahir, SA; Kalam, MA; Masjuki, HH; Shumon, R; Rashid, MH 2016. A public survey on knowledge, awareness, attitude and willingness to pay for WEEE management: Case study in Bangladesh. JOURNAL OF CLEANER PRODUCTION (ISI-Indexed)
  • Mosarof, M. H., Kalam, M. A., Masjuki, H. H., Arslan, A., Monirul, I. M., Ruhul, A. M., Shahir, S. A., Khuong, L. S. 2016. Analysis of thermal stability and lubrication characteristics of Millettia pinnata oil. Rsc Advances. (Tier 2, Impact Factor = 3.289) (ISI-Indexed)
  • Monirul, I. M., Masjuki, H. H., Kalam, M. A., Mosarof, M. H., Zulkifli, N. W. M., Teoh, Y. H., How, H. G. 2016. Assessment of performance, emission and combustion characteristics of palm, jatropha and Calophyllum inophyllum biodiesel blends. Fuel. (Tier 1, Impact Factor = 3.611) (ISI-Indexed)
  • Gulzar, M., Masjuki, H. H., Varman, M., Kalam, M. A., Zulkifli, N. W. M., Mufti, R. A., Liaquat, A. M., Zahid, R., ArsIan, A. 2016. Effects of biodiesel blends on lubricating oil degradation and piston assembly energy losses. Energy. (Tier 1, Impact Factor = 4.292) (ISI-Indexed)
  • Zafar, Q., Azmer, M. I., Al-Sehemi, A. G., Al-Assiri, M. S., Kalam, A., Sulaiman, K. 2016. Evaluation of humidity sensing properties of TMBHPET thin film embedded with spinel cobalt ferrite nanoparticles. Journal of Nanoparticle Research. (Tier 2, Impact Factor = 2.101) (ISI-Indexed)
  • Islam, MM; Hassan, MH; Kalam, MA; Zulkifli, NWBM; Habibullah, M; Hossain, MM 2016. Improvement of cold flow properties of Cocos nucifera and Calophyllum inophyllum biodiesel blends using polymethyl acrylate additive. JOURNAL OF CLEANER PRODUCTION (ISI-Indexed)
  • Zahid, R., Masjuki, H. H., Varman, M., Abul Kalam, M., Mufti, R. A., Zulkifli, N., Gulzar, M., Azman, S. 2016. Influence of intrinsic and extrinsic conditions on the tribological characteristics of diamond-like carbon coatings: A review. Journal of Materials Research. (Tier 3, Impact Factor = 1.579) (ISI-Indexed)
  • Al-Sehemi, A. G., Al-Assiri, M. S., Kalam, A., Zafar, Q., Azmer, M. I., Sulaiman, K., Ahmad, Z. 2016. Sensing performance optimization by tuning surface morphology of organic (D-pi-A) dye based humidity sensor. Sensors and Actuators B-Chemical. (Tier 1, Impact Factor = 4.758) (ISI-Indexed)
  • Arslan, A., Masjuki, H. H., Kalam, M. A., Varman, M., Mufti, R. A., Mosarof, M. H., Khuong, L. S., Quazi, M. M. 2016. Surface Texture Manufacturing Techniques and Tribological Effect of Surface Texturing on Cutting Tool Performance: A Review. Critical Reviews in Solid State and Materials Sciences. (Tier 1, Impact Factor = 5.556) (ISI-Indexed)
  • Zulkifli, N. W. M., Azman, S. S. N., Kalam, M. A., Masjuki, H. H., Yunus, R., Gulzar, M. 2016. Lubricity of bio-based lubricant derived from different chemically modified fatty acid methyl ester Tribology International (ISI-Indexed)

2015
  • Al Mahmud, K. A. H., Kalam, M. A., Masjuki, H. H., Abdollah, M. F. B. 2015. Tribological Study of a Tetrahedral Diamond-Like Carbon Coating under Vegetable Oil-Based Lubricated Condition Tribology Transactions (ISI-Indexed)
  • Habibullah, M., Masjuki, H. H., Kalam, M. A., Gulzar, M., Arslan, A., Zahid, R. 2015. Tribological Characteristics of Calophyllum inophyllum-Based TMP (Trimethylolpropane) Ester as Energy-Saving and Biodegradable Lubricant Tribology Transactions (ISI-Indexed)
  • Iqbal, M. A., Varman, M., Hassan, M. H., Kalam, M. A., Hossain, S., Sayeed, I. 2015. Tailoring fuel properties using jatropha, palm and coconut biodiesel to improve CI engine performance and emission characteristics Journal of Cleaner Production (ISI-Indexed)
  • Habibullah, M., Masjuki, H. H., Kalam, M. A., Rahman, S. M. A., Mofijur, M., Mobarak, H. M., Ashraful, A. M. 2015. Potential of biodiesel as a renewable energy source in Bangladesh Renewable Sustainable Energy Reviews (ISI-Indexed)
  • Ashraful, A. M., Masjuki, H. H., Kalam, M. A. 2015. Particulate matter, carbon emissions and elemental compositions from a diesel engine exhaust fuelled with diesel-biodiesel blends Atmospheric Environment (ISI-Indexed)
  • Habibullah, M., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Masum, B. M., Arslan, A., Gulzar, M. 2015. Friction and wear characteristics of Calophyllum inophyllum biodiesel Industrial Crops and Products (ISI-Indexed)
  • Monirul, I. M., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Rashedul, H. K., Rashed, M. M., Imdadul, H. K., Mosarof, M. H. 2015. A comprehensive review on biodiesel cold flow properties and oxidation stability along with their improvement processes Rsc Advances (ISI-Indexed)
  • Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Rashed, M. M., Rashedul, H. K., Monirul, I. M., Mosarof, M. H. 2015. A comprehensive review on the assessment of fuel additive effects on combustion behavior in CI engine fuelled with diesel biodiesel blends Rsc Advances (ISI-Indexed)
  • Teoh, Y. H., Masjuki, H. H., Kalam, M. A., How, H. G. 2015. Comparative assessment of performance, emissions and combustion characteristics of gasoline/diesel and gasoline/biodiesel in a dual-fuel engine Rsc Advances (ISI-Indexed)
  • Teoh, Y. H., Masjuki, H. H., Kalam, M. A., How, H. G. 2015. Effect of injection timing and EGR on engine-out-responses of a common-rail diesel engine fueled with neat biodiesel Rsc Advances (ISI-Indexed)
  • Mosarof, M. H., Kalam, M. A., Masjuki, H. H., Ashraful, A. M., Rashed, M. M., Imdadul, H. K., Monirul, I. M. 2015. Implementation of palm biodiesel based on economic aspects, performance, emission, and wear characteristics Energy Conversion and Management (ISI-Indexed)
  • Gulzar, M., Masjuki, H. H., Kalam, M. A., Varman, M., Fattah, I. M. R. 2015. Oil filter modification for biodiesel-fueled engine: A pathway to lubricant sustainability and exhaust emissions reduction Energy Conversion and Management (ISI-Indexed)
  • Rashed, M. M., Kalam, M. A., Masjuki, H. H., Rashedul, H. K., Ashraful, A. M., Shancita, I., Ruhul, A. M. 2015. Stability of biodiesel, its improvement and the effect of antioxidant treated blends on engine performance and emission Rsc Advances (ISI-Indexed)
  • Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., Rashedul, H. K. 2015. Influence of gas-to-liquid (GTL) fuel in the combined blend of Jatropha biodiesel and diesel: an analysis of engine combustion-performance-emission parameters Rsc Advances (ISI-Indexed)
  • Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., Ashraful, A. M. 2015. Influence of gas-to-liquid (GTL) fuel in the blends of Calophyllum inophyllum biodiesel and diesel: An analysis of combustion-performance-emission characteristics Energy Conversion and Management (ISI-Indexed)
  • Wakil, M. A., Kalam, M. A., Masjuki, H. H., Atabani, A. E., Fattah, I. M. R. 2015. Influence of biodiesel blending on physicochemical properties and importance of mathematical model for predicting the properties of biodiesel blend Energy Conversion and Management (ISI-Indexed)
  • Gulzar, M., Masjuki, H. H., Varman, M., Kalam, M. A., Mufti, R. A., Zulkifli, N. W. M., Yunus, R., Zahid, R. 2015. Improving the AW/EP ability of chemically modified palm oil by adding CuO and MoS2 nanoparticles Tribology International (ISI-Indexed)
  • Al Mahmud, K. A. H., Kalam, M. A., Masjuki, H. H., Mobarak, H. M., Zulkifli, N. W. M. 2015. An updated overview of diamond-like carbon coating in tribology Critical Reviews in Solid State and Materials Sciences (ISI-Indexed)
  • Palash, S. M., Masjuki, H. H., Kalam, M. A., Atabani, A. E., Fattah, I. M. R., Sanjid, A. 2015. Biodiesel production, characterization, diesel engine performance, and emission characteristics of methyl esters from Aphanamixis polystachya oil of Bangladesh Energy Conversion and Management (ISI-Indexed)
  • Sanjid, A., Masjuki, H. H., Kalam, M. A., Rahman, S. M. A., Abedin, M. J., Fattah, I. M. R. 2015. Characterization and prediction of blend properties and evaluation of engine performance and emission parameters of a CI engine operated with various biodiesel blends Rsc Advances (ISI-Indexed)
  • Hossain, S., Masjuki, H. H., Varman, M., Kalam, M. A., Rahman, S. M. A. 2015. Comparative evaluation of the blends of gas-to-liquid (GTL) fuels and biodiesels with diesel at high idling conditions: an in-depth analysis on engine performance and environment pollutants Rsc Advances (ISI-Indexed)
  • Zahid, R., Masjuki, H. H., Varman, M., Mufti, R. A., Kalam, M. A., Gulzar, M. 2015. Effect of Lubricant Formulations on the Tribological Performance of Self-Mated Doped DLC Contacts: a review Tribology Letters (ISI-Indexed)
  • Masum, S. M., Masjuki, H. H., Kalam, M. A., Palash, S. M., Habibullah, M. 2015. Effect of alcohol-gasoline blends optimization on fuel properties, performance and emissions of a SI engine Journal of Cleaner Production (ISI-Indexed)
  • Habibullah, M., Fattah, I. M. R., Masjuki, H. H., Kalam, M. A. 2015. Effects of Palm-Coconut Biodiesel Blends on the Performance and Emission of a Single-Cylinder Diesel Engine Energy Fuels (ISI-Indexed)
  • Mofijur, M., Masjuki, H. H., Kalam, M. A., Rahman, S. M. A., Mahmudul, H. M. 2015. Energy scenario and biofuel policies and targets in ASEAN countries Renewable Sustainable Energy Reviews (ISI-Indexed)
  • Teoh, Y. H., Masjuki, H. H., Noor, I. M., Ali, B. S., Kalam, M. A., How, H. G. 2015. Evaluation of a novel biofuel from unwanted waste and its impact on engine performance, emissions, and combustion characteristics in a diesel engine Rsc Advances (ISI-Indexed)
  • Arbab, M. I., Varman, M., Masjuki, H. H., Kalam, M. A., Imtenan, S., Sajjad, H., Fattah, I. M. R. 2015. Evaluation of combustion, performance, and emissions of optimum palm-coconut blend in turbocharged and non-turbocharged conditions of a diesel engine Energy Conversion and Management (ISI-Indexed)
  • Rashedul, H. K., Masjuki, H. H., Kalam, M. A., Teoh, Y. H., How, H. G., Fattah, I. M. R. 2015. Effect of antioxidant on the oxidation stability and combustion-performance-emission characteristics of a diesel engine fueled with diesel-biodiesel blend Energy Conversion and Management. (Tier 1, Impact Factor = 4.380) (ISI-Indexed)
  • Hntenan, S., Rahman, S. M. A., Masjuki, H. H., Varman, M., Kalam, M. A. 2015. Effect of dynamic injection pressure on performance, emission and combustion characteristics of a compression ignition engine Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.901) (ISI-Indexed)
  • Arslan, A., Masjuki, H. H., Varman, M., Kalam, M. A., Quazi, M. M., Al Mahmud, K. A. H., Gulzar, M., Habibullah, M. 2015. Effects of texture diameter and depth on the tribological performance of DLC coating under lubricated sliding condition Applied Surface Science. (Tier 1, Impact Factor = 2.711) (ISI-Indexed)
  • Wakil, M. A., Masjuki, H. H., Kalam, M. A., Teoh, Y. H., How, H. G., Imtenan, S. 2015. Influence of engine operating variable on combustion to reduce exhaust emissions using various biodiesels blend Rsc Advances. (Tier 1, Impact Factor = 3.840) (ISI-Indexed)
  • Ruhul, A. M., Kalam, M. A., Masjuki, H. H., Fattah, I. M. R., Reham, S. S., Rashed, M. M. 2015. State of the art of biodiesel production processes: a review of the heterogeneous catalyst Rsc Advances. (Tier 1, Impact Factor = 3.840) (ISI-Indexed)
  • Reham, S. S., Masjuki, H. H., Kalam, M. A., Shancita, I., Fattah, I. M. R., Ruhul, A. M. 2015. Study on stability, fuel properties, engine combustion, performance and emission characteristics of biofuel emulsion Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.901) (ISI-Indexed)

2014
  • Pang, S. C., Masjuki, H. H., Kalam, M. A., Hazrat, M. A.�2014.�Transient simulation of coolant peak temperature due to prolonged fan and/or water pump operation after the vehicle is keyed-off.�Heat and Mass Transfer,vol.50,pp.39-56. (ISI-Indexed)
  • Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Abedin, M. J., Sanjid, A., Imtenan, S. 2014. Effect of idling on fuel consumption and emissions fueled by Jatropha biodiesel blends of a diesel engine. Journal of Cleaner Production,vol.69,pp.208-215. (ISI-Indexed)
  • Zulkifli, N. W. M., Kalam, M. A., Masjuki, H. H., Al Mahmud, K. A. H., Yunus, R.�2014.�The Effect of Temperature on Tribological Properties of Chemically Modified Bio-Based Lubricant,�Tribology Transactions,vol.57,pp.408-415. (ISI-Indexed)
  • Ashraful, A. M., Masjuki, H. H., Kalam, M. A., Rahman, S. M. A., Habibullah, M., Syazwan, M.�2014.�Study of the Effect of Storage Time on the Oxidation and Thermal Stability of Various Biodiesels and Their Blends.�Energy Fuels,vol.28(2),pp.1081-1089. (ISI-Indexed)
  • Mofijur, M., Masjuki, H. H., Kalam, M. A., Atabani, A. E., Arbab, M. I., Cheng, S. F., Gouk, S. W.�2014.�Properties and use of Moringa oleifera biodiesel and diesel fuel blends in a multi-cylinder diesel engine.�Energy Conversion and Management, vol.82,pp.169-176. (ISI-Indexed)
  • Sanjid, A., Masjuki, H. H., Kalam, M. A., Rahman, S. M. A., Abedin, M. J., Palash, S. M.�2014.�Production of palm and jatropha based biodiesel and investigation of palm-jatropha combined blend properties, performance, exhaust emission and noise in an unmodified diesel engine.�Journal of Cleaner Production,vol.65,pp.295-303. (ISI-Indexed)
  • Ashraful, A. M., Masjuki, H. H., Kalam, M. A., Fattah, I. M. R., Imtenan, S., Shahir, S. A., Mobarak, H. M.�2014.�Production and comparison of fuel properties, engine performance, and emission characteristics of biodiesel from various non-edible vegetable oils: A review.�Energy Conversion and Management,vol.80,pp.202-228. (ISI-Indexed)
  • Abedin, M. J., Masjuki, H. H., Kalam, M. A., Sanjid, A., Rahman, S. M. A., Fattah, I. M. R.�2014.�Performance, emissions, and heat losses of palm and jatropha biodiesel blends in a diesel engine�Industrial Crops and Products,vol.59,pp.96-104. (ISI-Indexed)
  • Fattah, I. M. R., Masjuki, H. H., Kalam, M. A., Wakil, M. A., Rashedul, H. K., Abedin, M. J.�2014.�Performance and emission characteristics of a CI engine fueled with Cocos nucifera and Jatropha curcas B20 blends accompanying antioxidants,�Industrial Crops and Products,vol.57,pp.132-140. (ISI-Indexed)
  • Masum, B. M., Kalam, M. A., Masjuki, H. H., Palash, S. M., Fattah, I. M. R.�2014.�Performance and emission analysis of a multi cylinder gasoline engine operating at different alcohol-gasoline blends.�Rsc Advances,vol.4(53),27898-27904. (ISI-Indexed)
  • Rahman, M. M., Hassan, M. H., Kalam, M. A., Atabani, A. E., Memon, L. A., Rahman, S. M. A.�2014.�Performance and emission analysis of Jatropha curcas and Moringa oleifera methyl ester fuel blends in a multi-cylinder diesel engine.�Journal of Cleaner Production,vol.65,pp.304-310. (ISI-Indexed)
  • Palash, S. M., Kalam, M. A., Masjuki, H. H., Arbab, M. I., Masum, B. M., Sanjid, A.�2014.�Impacts of NOx reducing antioxidant additive on performance and emissions of a multi-cylinder diesel engine fueled with Jatropha biodiesel blends,�Energy Conversion and Management,vol.77,pp.577-585. (ISI-Indexed)
  • Imtenan, S., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Sajjad, H., Rahman, S. M. A. 2014. Impact of oxygenated additives to palm and jatropha biodiesel blends in the context of performance and emissions characteristics of a light-duty diesel engine. Energy Conversion and Management,vol.83,pp.149-158. (ISI-Indexed)
  • Imtenan, S., Varman, M., Masjuki, H. H., Kalam, M. A., Sajjad, H., Arbab, M. I., Fattah, I. M. R.�2014.�Impact of low temperature combustion attaining strategies on diesel engine emissions for diesel and biodiesels: A review.�Energy Conversion and Management, vol.80,pp.329-356. (ISI-Indexed)
  • Shahir, S. A., Masjuki, H. H., Kalam, M. A., Imran, A., Fattah, I. M. R., Sanjid, A.�2014.�Feasibility of diesel-biodiesel-ethanol/bioethanol blend as existing CI engine fuel: An assessment of properties, material compatibility, safety and combustion�Renewable. Sustainable Energy Reviews,vol.32,pp.379-395. (ISI-Indexed)
  • Fattah, I. M. R., Masjuki, H. H., Kalam, M. A., Wakil, M. A., Ashraful, A. M., Shahir, S. A. 2014. Experimental investigation of performance and regulated emissions of a diesel engine with Calophyllum inophyllum biodiesel blends accompanied by oxidation inhibitors, Energy Conversion and Management, vol.83,pp.232-240. (ISI-Indexed)
  • Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., Rahman, S. M. A.�2014.�Engine combustion, performance and emission characteristics of gas to liquid (GTL) fuels and its blends with diesel and bio-diesel.�Renewable Sustainable Energy Reviews,vol30,pp.961-986. (ISI-Indexed)
  • Al Mahmud, K. A. H., Varman, M., Kalam, M. A., Masjuki, H. H., Mobarak, H. M., Zulkifli, N. W. M.�2014.�Tribological characteristics of amorphous hydrogenated (a-C:H) and tetrahedral (ta-C) diamond-like carbon coating at different test temperatures in the presence of commercial lubricating oil.�Surface Coatings Technology,vol.245,pp.133-147. (ISI-Indexed)
  • How, H. G., Masjuki, H. H., Kalam, M. A., Teoh, Y. H. 2014. An investigation of the engine performance, emissions and combustion characteristics of coconut biodiesel in a high-pressure common-rail diesel engine. Energy. Vol 69,pp.749-759. (ISI-Indexed)
  • Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Abedin, M. J., Sanjid, A., Rahman, M. M. 2014. Assessing idling effects on a compression ignition engine fueled with Jatropha and Palm biodiesel blends. Renewable Energy, vol.68,pp.644-650. (ISI-Indexed)
  • Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Sanjid, A., Abedin, M. J. 2014. Assessment of emission and performance of compression ignition engine with varying injection timing. Renewable Sustainable Energy Reviews,vol.73,pp.124-130. (ISI-Indexed)
  • Fattah, I. M. R., Kalam, M. A., Masjuki, H. H., Wakil, M. A. 2014. Biodiesel production, characterization, engine performance, and emission characteristics of Malaysian Alexandrian laurel oil. Rsc Advances,vol.4(34),pp.17787-17796). (ISI-Indexed)
  • Mofijur, M., Masjuki, H. H., Kalam, M. A., Atabani, A. E., Fattah, I. M. R., Mobarak, H. M.�2014.�Comparative evaluation of performance and emission characteristics of Moringa oleifera and Palm oil based biodiesel in a diesel engine.�Industrial Crops and Products,vol.53,pp.78-84. (ISI-Indexed)
  • Atabani, A. E., Mofijur, M., Masjuki, H. H., Badruddin, I. A., Kalam, M. A., Chong, W. T. 2014. Effect of Croton megalocarpus, Calophyllum inophyllum, Moringa oleifera, palm and coconut biodiesel-diesel blending on their physico-chemical properties. Industrial Crops and Products,vol.60,pp.130-137. (ISI-Indexed)
  • Fattah, I. M. R., Masjuki, H. H., Kalam, M. A., Mofijur, M., Abedin, M. J. 2014. Effect of antioxidant on the performance and emission characteristics of a diesel engine fueled with palm biodiesel blends. Energy Conversion and Management,vol.79,pp.265-272. (ISI-Indexed)
  • Fattah, I. M. R., Masjuki, H. H., Kalam, M. A., Hazrat, M. A., Masum, B. M., Imtenan, S., Ashraful, A. M. 2014. Effect of antioxidants on oxidation stability of biodiesel derived from vegetable and animal based feedstocks. Renewable Sustainable Energy Reviews,vol.30,pp.356-370. (ISI-Indexed)
  • Mobarak, H. M., Mohamad, E. N., Masjuki, H. H., Kalam, M. A., Al Mahmud, K. A. H., Habibullah, M., Ashraful, A. M.�2014.�The prospects of biolubricants as alternatives in automotive applications.�Renewable Sustainable Energy Reviews,vol.33,pp.34-43. (ISI-Indexed)
  • Mobarak, H. M., Masjuki, H. H., Mohamad, E. N., Kalam, M. A., Rashedul, H. K., Rashed, M. M., Habibullah, M. 2014. Tribological properties of amorphous hydrogenated (a-C:H) and hydrogen-free tetrahedral (ta-C) diamond-like carbon coatings under jatropha biodegradable lubricating oil at different temperatures Applied Surface Science. (Tier 1, Impact Factor = 2.538) (ISI-Indexed)
  • Rashedul, H. K., Masjuki, H. H., Kalam, M. A., Ashraful, A. M., Rahman, S. M. A., Shahir, S. A. 2014. The effect of additives on properties, performance and emission of biodiesel fuelled compression ignition engine Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
  • Masum, B. M., Masjuki, H. H., Kalam, M. A., Palash, S. M., Wakil, M. A., Imtenan, S. 2014. Tailoring the key fuel properties using different alcohols (C-2-C-6) and their evaluation in gasoline engine Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
  • Fattah, I. M. R., Hassan, M. H., Kalam, M. A., Atabani, A. E., Abedin, M. J. 2014. Synthetic phenolic antioxidants to biodiesel: path toward NOx reduction of an unmodified indirect injection diesel engine Journal of Cleaner Production. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
  • Nasir, M. K., Noor, R. M., Kalam, M. A., Masum, B. M. 2014. Reduction of Fuel Consumption and Exhaust Pollutant Using Intelligent Transport Systems Scientific World Journal. (Tier 2, Impact Factor = 1.219) (ISI-Indexed)
  • Arbab, M. I., Masjuki, H. H., Varman, M., Kalam, M. A., Sajjad, H., Imtenan, S. 2014. Performance and emission characteristics of a diesel engine fueled by an optimum biodiesel-biodiesel blend Rsc Advances. (Tier 1, Impact Factor = 3.708) (ISI-Indexed)
  • Rashedul, H. K., Masjuki, H. H., Kalam, M. A., Ashraful, A. M., Rashed, M. M., Sanchita, I., Shaon, T. 2014. Performance and emission characteristics of a compression ignition engine running with linseed biodiesel Rsc Advances. (Tier 1, Impact Factor = 3.708) (ISI-Indexed)
  • Rashedul, H. K., Kalam, M. A., Masjuki, H. H., Ashraful, A. M., Imtenan, S., Sajjad, H., Wee, L. K. 2014. Numerical study on convective heat transfer of a spark ignition engine fueled with bioethanol International Communications in Heat and Mass Transfer. (Tier 1, Impact Factor = 2.124) (ISI-Indexed)
  • Gholamrezaei, S., Salavati-Niasari, M., Bazarganipour, M., Panahi-Kalamuei, M., Bagheri, S. 2014. Novel precursors for synthesis of dendrite-like PbTe nanostructures and investigation of photoluminescence behavior Advanced Powder Technology. (Tier 2, Impact Factor = 1.642) (ISI-Indexed)
  • Ashraful, A. M., Masjuki, H. H., Kalam, M. A., Rashedul, H. K., Sajjad, H., Abedin, M. J. 2014. Influence of anti-corrosion additive on the performance, emission and engine component wear characteristics of an IDI diesel engine fueled with palm biodiesel Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
  • Masum, B. M., Kalam, M. A., Masjuki, H. H., Rahman, S. M. A., Daggig, E. E. 2014. Impact of denatured anhydrous ethanol-gasoline fuel blends on a spark-ignition engine Rsc Advances. (Tier 1, Impact Factor = 3.708) (ISI-Indexed)
  • Liaquat, A. M., Masjuki, H. H., Kalam, M. A., Fattah, I. M. R. 2014. Impact of biodiesel blend on injector deposit formation Energy. (Tier 1, Impact Factor = 4.159) (ISI-Indexed)
  • Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., Rashed, M. M. 2014. Comparative study of gas-to-liquid fuel, B5 diesel and their blends with respect to fuel properties, engine performance and exhaust emissions Rsc Advances. (Tier 1, Impact Factor = 3.708) (ISI-Indexed)
  • Abedin, M. J., Masjuki, H. H., Kalam, M. A., Sanjid, A., Ashraful, A. M. 2014. Combustion, performance, and emission characteristics of low heat rejection engine operating on various biodiesels and vegetable oils Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
  • Sanjid, A., Kalam, M. A., Masjuki, H. H., Rahman, S. M. A., Abedin, M. J. 2014. Combustion, performance and emission characteristics of a DI diesel engine fueled with Brassica juncea methyl ester and its blends Rsc Advances. (Tier 1, Impact Factor = 3.708) (ISI-Indexed)
  • Habibullah, M., Masjuki, H. H., Kalam, M. A., Fattah, I. M. R., Ashraful, A. M., Mobarak, H. M. 2014. Biodiesel production and performance evaluation of coconut, palm and their combined blend with diesel in a single-cylinder diesel engine Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
  • Shancita, I., Masjuki, H. H., Kalam, M. A., Fattah, I. M. R., Rashed, M. M., Rashedul, H. K. 2014. A review on idling reduction strategies to improve fuel economy and reduce exhaust emissions of transport vehicles Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
  • Ahmed, S., Hassan, M. H., Kalam, M. A., Rahman, S. M. A., Abedin, M. J., Shahir, A. 2014. An experimental investigation of biodiesel production, characterization, engine performance, emission and noise of Brassica juncea methyl ester and its blends Journal of Cleaner Production. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
  • Fattah, I. M. R., Masjuki, H. H., Kalam, M. A., Masum, B. M. 2014. Effect of synthetic antioxidants on storage stability of Calophyllum inophyllum biodiesel Materials Research Innovations. (Tier 4, Impact Factor = 0.473) (ISI-Indexed)
  • Teoh, Y. H., Masjuki, H. H., Kalam, M. A., Amalina, M. A., How, H. G. 2014. Effects of Jatropha biodiesel on the performance, emissions, and combustion of a converted common-rail diesel engine Rsc Advances. (Tier 1, Impact Factor = 3.708) (ISI-Indexed)
  • Wakil, M. A., Kalam, M. A., Masjuki, H. H., Fattah, I. M. R., Masum, B. M. 2014. Evaluation of rice bran, sesame and moringa oils as feasible sources of biodiesel and the effect of blending on their physicochemical properties Rsc Advances. (Tier 1, Impact Factor = 3.708) (ISI-Indexed)
  • Abedin, M. J., Masjuki, H. H., Kalam, M. A., Varman, M., Arbab, M. I., Fattah, I. M. R., Masum, B. M. 2014. Experimental Investigation of a Multicylinder Unmodified Diesel Engine Performance, Emission, and Heat Loss Characteristics Using Different Biodiesel Blends: Rollout of B10 in Malaysia Scientific World Journal. (Tier 2, Impact Factor = 1.219) (ISI-Indexed)

2013
  • Mofijur, M., Atabani, A. E., Masjuki, H. H., Kalam, M. A., Masum, B. M. 2013. A study on the effects of promising edible and non-edible biodiesel feedstocks on engine performance and emissions production: A comparative evaluation Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.627) (ISI-Indexed)
  • Shahabuddin, M., Masjuki, H. H., Kalam, M. A., Bhuiya, M. M. K., Mehat, H. 2013. Comparative tribological investigation of bio-lubricant formulated from a non-edible oil source (Jatropha oil) Industrial Crops and Products. (Tier 1, Impact Factor = 2.468) (ISI-Indexed)
  • Mofijur, M., Masjuki, H. H., Kalam, M. A., Atabani, A. E., Shahabuddin, M., Palash, S. M., Hazrat, M. A. 2013. Effect of biodiesel from various feedstocks on combustion characteristics, engine durability and materials compatibility: A review Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.627) (ISI-Indexed)
  • Masum, B. M., Masjuki, H. H., Kalam, M. A., Fattah, I. M. R., Palash, S. M., Abedin, M. J. 2013. Effect of ethanol-gasoline blend on NOx emission in SI engine Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.627) (ISI-Indexed)
  • Abedin, M., Masjuki, H. H., Kalam, M. A., Sanjid, A., Rahman, S. M. A., Masum, B. M. 2013. Energy balance of internal combustion engines using alternative fuels Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.627) (ISI-Indexed)
  • Mofijur, M., Masjuki, H. H., Kalam, M. A., Atabani, A. E. 2013. Evaluation of biodiesel blending, engine performance and emissions characteristics of Jatropha curcas methyl ester: Malaysian perspective Energy. (Tier 1, Impact Factor = 3.651) (ISI-Indexed)
  • Arbab, M. I., Masjuki, H. H., Varman, M., Kalam, M. A., Imtenan, S., Sajjad, H. 2013. Fuel properties, engine performance and emission characteristic of common biodiesels as a renewable and sustainable source of fuel Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.627) (ISI-Indexed)
  • Shahabuddin, M., Liaquat, A. M., Masjuki, H. H., Kalam, M. A., Mofijur, M. 2013. Ignition delay, combustion and emission characteristics of diesel engine fueled with biodiesel Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.627) (ISI-Indexed)
  • Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Abedin, M. J., Sanjid, A., Sajjad, H. 2013. Impact of idling on fuel consumption and exhaust emissions and available idle-reduction technologies for diesel vehicles - A review Energy Conversion and Management. (Tier 1, Impact Factor = 2.775) (ISI-Indexed)
  • Liaquat, A. M., Masjuki, H. H., Kalam, M. A., Fazal, M. A., Khan, A. F., Fayaz, H., Varman, M. 2013. Impact of palm biodiesel blend on injector deposit formation Applied Energy. (Tier 1, Impact Factor = 4.781) (ISI-Indexed)
  • Sanjid, A., Masjuki, H. H., Kalam, M. A., Rahman, S. M. A., Abedin, M. J., Palash, S. M. 2013. Impact of palm, mustard, waste cooking oil and Calophyllum inophyllum biofuels on performance and emission of CI engine Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.627) (ISI-Indexed)
  • Fattah, I. M. R., Masjuki, H. H., Liaquat, A. M., Ramli, R., Kalam, M. A., Riazuddin, V. N. 2013. Impact of various biodiesel fuels obtained from edible and non-edible oils on engine exhaust gas and noise emissions Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.627) (ISI-Indexed)
  • Palash, S. M., Kalam, M. A., Masjuki, H. H., Masum, B. M., Fattah, I. M. R., Mofijur, M. 2013. Impacts of biodiesel combustion on NOx emissions and their reduction approaches Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.627) (ISI-Indexed)
  • Pang, S. C., Masjuki, H. H., Kalam, M. A., Hazrat, M. A. 2013. Liquid absorption and solid adsorption system for household, industrial and automobile applications: A review Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.627) (ISI-Indexed)
  • Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Abedin, M. J., Sanjid, A., Sajjad, H. 2013. Production of palm and Calophyllum inophyllum based biodiesel and investigation of blend performance and exhaust emission in an unmodified diesel engine at high idling conditions Energy Conversion and Management. (Tier 1, Impact Factor = 2.775) (ISI-Indexed)
  • Imran, A., Varman, M., Masjuki, H. H., Kalam, M. A. 2013. Review on alcohol fumigation on diesel engine: A viable alternative dual fuel technology for satisfactory engine performance and reduction of environment concerning emission Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.627) (ISI-Indexed)
  • Palash, S. M., Masjuki, H. H., Kalam, M. A., Masum, B. M., Sanjid, A., Abedin, M. J. 2013. State of the art of NOx mitigation technologies and their effect on the performance and emission characteristics of biodiesel-fueled Compression Ignition engines Energy Conversion and Management. (Tier 1, Impact Factor = 2.775) (ISI-Indexed)
  • Hussan, M. J., Hassan, M. H., Abul Kalam, M., Memon, L. A. 2013. Tailoring key fuel properties of diesel-biodiesel-ethanol blends for diesel engine Journal of Cleaner Production. (Tier 1, Impact Factor = 3.398) (ISI-Indexed)
  • Zulkifli, N. W. M., Kalam, M. A., Masjuki, H. H., Shahabuddin, M., Yunus, R. 2013. Wear prevention characteristics of a palm oil-based TMP (trimethylolpropane) ester as an engine lubricant Energy. (Tier 1, Impact Factor = 3.651) (ISI-Indexed)
  • Rizwanul Fattah, I.M., Masjuki, H.H., Liaquat, A.M., Ramli, R., Kalam, M.A. & Riazuddin, V.N. "Impact of various biodiesel fuels obtained from edible and non-edible oils on engine exhaust gas and noise emissions", Renewable and Sustainable Energy Reviews, vol18, p.552-567, 2013. (ISI/SCOPUS Indexed Publication)
  • Masum BM, Masjuki HH, Kalam MA, Rizwanul Fattah IM, Palash SM, Abedin MJ. Effect of Ethanol-Gasoline Blend on NOx emission in SI engine. Renewable and Sustainable Energy Reviews. 2013, p.209-222. (ISI-Indexed)
  • M.J. Abedin, H.H. Masjuki, M.A. Kalam, A. Sanjid, S.M. Ashrafur Rahman, B.M. Masum, Energy balance of internal combustion engines using alternative fuels, Renewable and Sustainable Energy Reviews, Volume 26, October 2013, Pages 20-33. (ISI-Indexed)
  • Masjuki Hj. Hassan, Md. Abul Kalam An Overview of Biofuel as a Renewable Energy Source: Development and Challenges , Procedia Engineering, Volume 56, 2013, Pages 39-53. (ISI-Indexed)
  • M. Shahabuddin, H.H. Masjuki, M.A. Kalam, Experimental Investigation into Tribological Characteristics of Bio-Lubricant Formulated from Jatropha Oil, Procedia Engineering, Volume 56, 2013, Pages 597-606. (ISI-Indexed)
  • A.M. Liaquat, H.H. Masjuki, M.A. Kalam, I.M. Rizwanul Fattah, M.A. Hazrat, M. Varman, M. Mofijur, M. Shahabuddin, Effect of Coconut Biodiesel Blended Fuels on Engine Performance and Emission Characteristics,Procedia Engineering, Volume 56, 2013, Pages 583-590. (ISI-Indexed)
  • Mofijur M, Atabani AE, Masjuki HH, Kalam MA, Masum BM. A study on the effects of promising edible and non-edible biodiesel feedstocks on engine performance and emissions production: A comparative evaluation. Renewable and Sustainable Energy Reviews. 2013, p.391-404. (ISI-Indexed)
  • Palash MS, Kalam MA, Masjuki HH, Masum BM, Rizwanul Fattah IM, Mofijur M. Impacts of biodiesel combustion on NOx emissions and their reduction approaches. Renewable and Sustainable Energy Reviews. 2013, vol23, p473-490. (ISI-Indexed)
  • Zulkifli NWM, Kalam MA, Masjuki HH, Shahabuddin M, Yunus R. Wear prevention characteristics of a palm oil-based TMP (trimethylolpropane) ester as an engine lubricant. Energy. 2013, vol54, p.167-173. (ISI-Indexed)
  • Hussan MJ, Hassan MH, Kalam MA, Memon LA. Tailoring key fuel properties of diesel- biodiesel -ethanol blends for diesel engine. Journal of Cleaner Production. 2013, vol54, 118-125. (ISI-Indexed)
  • Mofijur M, Masjuki HH, Kalam MA, Atabani AE. Evaluation of biodiesel blending, engine performance and emissions characteristics of Jatropha curcas methyl ester: Malaysian perspective. Energy. 2013, vol55, p.879-887. (ISI-Indexed)
  • S.M. Ashrafur Rahman, H.H. Masjuki, M.A. Kalam, M.J. Abedin, A. Sanjid, H. Sajjad, Impact of idling on fuel consumption and exhaust emissions and available idle-reduction technologies for diesel vehicles � A review, Energy Conversion and Management, Volume 74, October 2013, Pages 171-182. (ISI-Indexed)
  • Mofijur M, Masjuki HH, Kalam MA, Shahabuddin M. Experimental study of additive added palm biodiesel in a compression ignition engine. Energy Educ Sci Technol-Part A. 2013;30(2):737-48. (ISI-Indexed)
  • Arbab MI, Masjuki HH, Varman M, Kalam MA, Imtenan S, Sajjad H. Fuel properties, engine performance and emission characteristic of common biodiesels as a renewable and sustainable source of fuel. Renewable and Sustainable Energy Reviews. 2013;22(0):133-47. (ISI-Indexed)
  • Shahabuddin, M.,Liaquat,A.M.,Masjuki,H.H.,Kalam, M.A, Mofijur,M.,2013.Ignition delay, combustion and emission characteristics of diesel engine fueled with biodiesel. Renewable and Sustainable Energy Reviews, 21:623-632 (ISI-Indexed)
  • S.M. Palash, H.H. Masjuki, M.A. Kalam, B.M. Masum, A. Sanjid, M.J. Abedin, State of the art of NOx mitigation technologies and their effect on the performance and emission characteristics of biodiesel-fueled Compression Ignition engines, Energy Conversion and Management, 76 (2013) 400-420. (ISI-Indexed)
  • S.C. Pang, H.H. Masjuki, M.A. Kalam, M.A. Hazrat, Liquid absorption and solid adsorption system for household, industrial and automobile applications: A review, Renewable and Sustainable Energy Reviews, 28 (2013) 836-847. (ISI-Cited Publication) (ISI-Indexed)
  • Shahabuddin, M., Masjuki, H. H., Kalam, M. A., Bhuiya, M. M. K., & Mehat, H. (2013). Comparative tribological investigation of bio-lubricant formulated from a non-edible oil source (Jatropha oil). Industrial Crops and Products, 47, 323-330. (ISI-Cited Publication) (ISI-Indexed)
  • Masum, B. M., Masjuki, H. H., Kalam, M. A., Rizwanul Fattah, I. M., Palash, S. M., & Abedin, M. J. (2013). Effect of ethanol gasoline blend on NOx emission in SI engine. Renewable and Sustainable Energy Reviews, 24(0), 209-222 (ISI-Indexed)
  • Rizwanul Fattah, I.M., Masjuki, H.H., Liaquat, A.M., Ramli, R., Kalam, M.A. & Riazuddin, V.N. "Impact of various biodiesel fuels obtained from edible and non-edible oils on engine exhaust gas and noise emissions", Renewable and Sustainable Energy Reviews, vol18, p.552-567, 2013. (ISI/SCOPUS Cited Publication) (ISI-Indexed)
  • Shahabuddin M.M.A.Kalam. Comparative tribological investigation of bio-lubricant formulated from a non- edible oil source (Jatropha oil). Industrial Crops and Products. 2013, vol 47, p.323-330. (ISI-Indexed)

2012
  • Liaquat, A.M., Masjuki, H.H., Kalam, M.A., Varman, M., Hazrat, M.A., Shahabuddin, M., Mofijur, M. 2012. Application of blend fuels in a diesel engine. Energy Procedia Volume 14, 2012, Pages 1124-1133. (SCOPUS-Indexed)
  • M.M.K. Bhuiya, J.U. Ahamed, M.S.U. Chowdhury, M.A.R. Sarkar, B. Salam, R. Saidur, H.H. Masjuki, M.A. Kalam,(2012), Heat transfer enhancement and development of correlation for turbulent flow through a tube with triple helical tape inserts.International Communications in Heat and Mass Transfer, Volume 39, Issue 1,Pages 94-101 (ISI-Indexed)
  • M.M. Rahman, Hakan F. ¿top, A. Ahsan, M.A. Kalam, Y. Varol, Double-diffusive natural convection in a triangular solar collector Original Research Article International Communications in Heat and Mass Transfer, Volume 39, Issue 2, February 2012, Pages 264-269 (ISI-Indexed)
  • S.C. Pang, M.A. Kalam, H.H. Masjuki, M.A. Hazrat, A review on air flow and coolant flow circuit in vehicles¿ cooling system Review Article International Journal of Heat and Mass Transfer, In Press, Corrected Proof, Available online 31 July 2012 (ISI-Indexed)
  • M.M.K. Bhuiya, M.S.U. Chowdhury, J.U. Ahamed, M.J.H. Khan, M.A.R. Sarkar, M.A. Kalam, H.H. Masjuki, M. Shahabuddin, Heat transfer performance for turbulent flow through a tube using double helical tape inserts Original Research Article International Communications in Heat and Mass Transfer, Volume 39, Issue 6, July 2012, Pages 818-825 (ISI-Indexed)
  • M. Shahabuddin, M.A. Kalam, H.H. Masjuki, M.M.K. Bhuiya, M. Mofijur, An experimental investigation into biodiesel stability by means of oxidation and property determination Original Research Article Energy, Volume 44, Issue 1, August 2012, Pages 616-622 (ISI-Indexed)
  • Rahman, M.M., Oztop, H.F., Ahsan, A., Kalam, M.A., Billah, M.M., MHD mixed convection in a channel with a triangular cavity(2012) Numerical Heat Transfer; Part A: Applications, 61 (4), pp. 268-282. (ISI-Indexed)
  • M. Mofijur, H.H. Masjuki, M.A. Kalam, M.A. Hazrat, A.M. Liaquat, M. Shahabuddin, M. Varman, Prospects of biodiesel from Jatropha in Malaysia Review Article Renewable and Sustainable Energy Reviews, Volume 16, Issue 7, September 2012, Pages 5007-5020 (ISI-Indexed)
  • Rahman, M. M., Oztop, H. F., Ahsan, A., Kalam, M. A., Billah, M. M. 2012. MHD MIXED CONVECTION IN A CHANNEL WITH A TRIANGULAR CAVITY Numerical Heat Transfer Part a-Applications. (Tier 1, Impact Factor = 2.492) (ISI-Indexed)
  • Mofijur, M., Masjuki, H. H., Kalam, M. A., Hazrat, M. A., Liaquat, A. M., Shahabuddin, M., Varman, M. 2012. Prospects of biodiesel from Jatropha in Malaysia Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 6.018) (ISI-Indexed)
  • Kalam, M. A., Masjuki, H. H., Shahabuddin, M., Mofijur, M. 2012. Tribological characteristics of amine phosphate and octylated/butylated diphenylamine additives infused bio-lubricant Energy Education Science and Technology Part a-Energy Science and Research. (Tier 1, Impact Factor = 31.677) (ISI-Indexed)
  • Kalam, M. A., Ahamed, J. U., Masjuki, H. H. 2012. Land availability of Jatropha production in Malaysia Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 6.018) (ISI-Indexed)
  • How, H. G., Teoh, Y. H., Masjuki, H. H., Kalam, M. A. 2012. Impact of coconut oil blends on particulate-phase PAHs and regulated emissions from a light duty diesel engine Energy. (Tier 1, Impact Factor = 3.487) (ISI-Indexed)
  • Bhuiya, M. M. K., Chowdhury, M. S. U., Ahamed, J. U., Khan, M. J. H., Sarkar, M. A. R., Kalam, M. A., Masjuki, H. H., Shahabuddin, M. 2012. Heat transfer performance for turbulent flow through a tube using double helical tape inserts International Communications in Heat and Mass Transfer. (Tier 1, Impact Factor = 1.892) (ISI-Indexed)
  • Bhuiya, M. M. K., Ahamed, J. U., Chowdhury, M. S. U., Sarkar, M. A. R., Salam, B., Saidur, R., Masjuki, H. H., Kalam, M. A. 2012. Heat transfer enhancement and development of correlation for turbulent flow through a tube with triple helical tape inserts International Communications in Heat and Mass Transfer. (Tier 1, Impact Factor = 1.892) (ISI-Indexed)
  • Bhuiya, M. M. K., Ahamed, J. U., Sarkar, M. A. R., Salam, B., Masjuki, H. H., Kalam, M. A., Saidur, R., Sayem, A. S. M. 2012. HEAT TRANSFER AND PRESSURE DROP CHARACTERISTICS IN TURBULENT FLOW THROUGH A TUBE Experimental Heat Transfer. (Tier 3, Impact Factor = 0.537) (ISI-Indexed)
  • Rahman, M. M., Oztop, H. F., Ahsan, A., Kalam, M. A., Varol, Y. 2012. Double-diffusive natural convection in a triangular solar collector International Communications in Heat and Mass Transfer. (Tier 1, Impact Factor = 1.892) (ISI-Indexed)
  • M. Mofijur, H.H.Masjuki, M.A.Kalam, M.A.Hazrat, A.M.Liaquat, M.Shahabuddin, M.Varman. 2012. Prospects of biodiesel from Jatropha in Malaysia. Renewable and Sustainable Energy Reviews 16(2012)5007¿5020 (ISI-Indexed)
  • Pang, S. C., Kalam, M. A., Masjuki, H. H., Hazrat, M. A. 2012. A review on air flow and coolant flow circuit in vehicles\ cooling system International Journal of Heat and Mass Transfer. (Tier 1, Impact Factor = 2.407) (ISI-Indexed)
  • Shahabuddin, M., Kalam, M. A., Masjuki, H. H., Bhuiya, M. M. K., Mofijur, M. 2012. An experimental investigation into biodiesel stability by means of oxidation and property determination Energy. (Tier 1, Impact Factor = 3.487) (ISI-Indexed)
  • M. M. K. Bhuiya, J. U. Ahamed, M. A. R.. Sarkar, B. Salam, R. Saidur, A. S. M. Sayem, M. A. Kalam, Heat transfer and pressure drop characteristics in turbulent flow through a tube, Experimental Heat Transfer, Vol. 25, issue 4, pp. 301-322. (ISI/SCOPUS Indexed Publication)
  • Impact of coconut oil blends on particulate-phase PAHs and regulated emissions from a light duty diesel engine H.G. How,Y.H. Teoh, H.H. Masjuki, M.A. Kalam (ISI-Indexed)
  • Mofijur, M., Masjuki, H.H., Kalam, M.A., Shahabuddin, M., Hazrat, M.A., Liaquat, A.M. 2012. Palm oil methyl ester and its emulsions effect on lubricant performance and engine components wear. Energy Procedia 14 , pp. 1748-1753 (ISI-Indexed)
  • Shahabuddin, M., Masjuki, H.H., Kalam, M.A., Mofijur, M., Hazrat, M.A., Liaquat, A.M. 2012. Effect of additive on performance of C.I. engine fuelled with bio diesel. Energy Procedia 14 , pp. 1624-1629 (ISI-Indexed)
  • Kalam, M.A., Ahamed, J.U., Masjuki, H.H.2012. Land availability of Jatropha production in Malaysia.Renewable and Sustainable Energy Reviews Volume 16, Issue 6, Pages 3999-4007 (ISI-Indexed)
  • Pang S.C., Masjuki H.H., Kalam M.A., Hazrat,M.A. 2012. A Review on Air Flow and Coolant Flow Circuit in Vehicles Cooling System, Int. J. Heat & Mass Trans., 55(24): 6295 6306. (ISI-Indexed)

2011
  • Jayed, M. H., Masjuki, H. H., Kalam, M. A., Mahlia, T. M. I., Husnawan, M., & Liaquat, A. M. (2011). Prospects of dedicated biodiesel engine vehicles in Malaysia and Indonesia. Renewable and Sustainable Energy Reviews, 15(1), pp. 220-235. (ISI-Indexed)
  • Rahman, M. M., Billah, M. M., Rahman, A., Kalam, M. A., Ahsan, A. 2011. Numerical investigation of heat transfer enhancement of nanofluids in an inclined lid-driven triangular enclosure International Communications in Heat and Mass Transfer. (Tier 1, Impact Factor = 1.609) (ISI-Indexed)
  • Kalam, M. A., Masjuki, H. H., Jayed, M. H., Liaquat, A. M. 2011. Emission and performance characteristics of an indirect ignition diesel engine fuelled with waste cooking oil Energy. (Tier 1, Impact Factor = 3.597) (ISI-Indexed)
  • Kalam, M. A., Hassan, M. H. 2011. Design, Modification and Testing of a Catalytic Converter for Natural Gas Fueled Engines Arabian Journal for Science and Engineering. (Tier 3, Impact Factor = 0.224 ) (ISI-Indexed)
  • Ching, Y. C., Kalam, A., Iskandar, I. Y. 2011. Comparison Use of Suspended Cell System and Polyurethane Base Immobilized Cell System in Biological Treatment of Wastewater Research Journal of Chemistry and Environment. (Tier 4, Impact Factor = 0.292) (ISI-Indexed)
  • Kalam, M. A., Masjuki, H. H. 2011. An experimental investigation of high performance natural gas engine with direct injection Energy. (Tier 1, Impact Factor = 3.597) (ISI-Indexed)
  • Jayed, M. H., Masjuki, H. H., Kalam, M. A., Mahlia, T. M. I., Husnawan, M., Liaquat, A. M. 2011. Prospects of dedicated biodiesel engine vehicles in Malaysia and Indonesia Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 4.595) (ISI-Indexed)
  • Kalam, M. A. & Masjuki, H. H. 2011. Design, modifiaction and test of a new catalytic converter for natural gas fueled engines. Arabian journal for science and engineering, 5(36): 677-688. (ISI-Indexed)
  • Kalam, M. A., Masjuki, H. H., Jayed, M. H. & Liaquat, A. M. 2011. Emission and performance characteristics of an indirect ignition diesel engine fuelled with waste cooking oil. Energy, 36, 397-402 (ISI Q1). (ISI-Indexed)
  • M.M. Rahman, M.M. Billah, A.T.M.M. Rahman, M.A. Kalam, A. Ahsan, Numerical investigation of heat transfer enhancement of nanofluids in an inclined lid-driven triangular enclosure,International Communications in Heat and Mass Transfer, Volume 38, Issue 10, December 2011, Pages 1360-1367. (ISI-Indexed)
  • 6) A.M. Liaquat, H.H. Masjuki, M.A. Kalam and A. Rasyidi, Experimental analysis of wear and friction characteristics of Jatropha oil added lubricants, Applied mechanics and materials, pp.914-919,October,2011. (SCOPUS-Indexed)
  • Ching Y. C.; Ching Y. C.; Kalam A.; et al., Comparison Use of Suspended Cell System and Polyurethane Base Immobilized Cell System in Biological Treatment of Wastewater, Research Journal Of Chemistry And Environment Volume: 15 Issue: 2 Pages:849-855,June,2011. (ISI-Indexed)
  • M.A. Kalam*, H.H. Masjuki, An experimental investigation of high performance natural gas engine with direct injection, Energy 36, 2011, pp.3563-3571(ISI Q1). (ISI-Indexed)
  • 8) M.M.K. Bhuiya, J.U. Ahamed, M.S.U. Chowdhury, M.A.R. Sarkar, B. Salam, R. Saidur, H.H. Masjuki, M.A. Kalam, Heat transfer enhancement and development of correlation for turbulent flow through a tube with triple helical tape inserts, International Communications in Heat and Mass Transfer, Available online 28 September 2011. (ISI-Indexed)

2010
  • Jahirul, M. I., Masjuki, H. H., Saidur, R., Kalam, M. A., Jayed, M. H., Wazed, M. A. 2010. Comparative engine performance and emission analysis of CNG and gasoline in a retrofitted car engine Applied Thermal Engineering. (Tier 1, Impact Factor = 1.922) (ISI-Indexed)
  • Liaquat, A. M., Kalam, M. A., Masjuki, H. H., Jayed, M. H. 2010. Potential emissions reduction in road transport sector using biofuel in developing countries Atmospheric Environment. (Tier 1, Impact Factor = 3.139) (ISI-Indexed)
  • Mahlia, T. M. I., Saidur, R., Husnawan, M., Masjuki, H. H. & Kalam, M. A. (2010). An approach to estimate the life-cycle cost of energy efficiency improvement of room air conditioners. Energy Education Science and Technology Part a-Energy Science and Research, 26(1):1-11. (ISI/SCOPUS Indexed Publication)
  • Mahlia, T. M. I., Saidur, R., Husnawan, M., Masjuki, H. H., Kalam, M. A. 2010. An approach to estimate the life-cycle cost of energy efficiency improvement of room air conditioners Energy Education Science and Technology Part a-Energy Science and Research (ISI-Indexed)
  • Memon, L. A., Kalam, M. A., Masjuki, H. H. & Jayed, M. H.2010. Potential Emissions Reduction in Road Transport Sector Using Biofuel in Developing Countries. Atmospheric Environment, 44, 3869-3877. (ISI/SCOPUS Indexed Publication)
  • Jahirul, M. I., Masjuki, H. H., Saidur, R., Kalam, M. A., Jayed, M. H. & Wazed, M. A.(2010) Comparative engine performance and emission analysis of CNG and gasoline in a retrofitted car engine. Applied Thermal Engineering, 30(14-15), 2219-2226. (ISI-Indexed)

2009
  • M.Husnawan, H.H. Masjuki, T.M.I. Mahlia, M.G. Saifullah, M.A. Kalam. The Use of Dihydroxy Fatty Acid and Palm-Based Polyol as Selected Components of Envo- Diesel Fuel Blends to Reduce C.I. Engine Gaseous Emissions and Carbon Deposits. SAE Technical paper 2009-01-1852. SAE Int. Warrendale-USA 2009. (Non-ISI/Non-SCOPUS)
  • M.A. Kalam, H.H. Masjuki, M. Redzuan, T.M.I. Mahlia, M. A. Fuad, M. Mohibah, Ku. Halim, A.Ishak and M.Khair, A.Shahrir and A.Yusoff, Experimental Test of a New Compressed Natural Gas Engine With Direct Injection, SAE paper no. 2009-01-1967, USA. (Non-ISI/Non-SCOPUS)
  • M.I. Jahirul, R. Saidur, H.H. Masjuki, M.A.Kalam and M.M. Rashid, Application of Artificial Neural Networks (ANN) for Prediction the Performance of a Dual Fuel Internal Combustion Engine, The Hong Kong Institution of Engineers, Vol 16, No 1, pp.14-20.2009. (SCOPUS-Indexed)
  • M.H. Jayed, H.H. Masjuki, R. Saidur, M.A. Kalam, M.I. Jahiru, Environmental aspects and challenges of oilseed produced biodiesel in Southeast Asia, Renewable and Sustainable Energy Reviews, vol.13, (9) pp.2452-2462,2009 (ISI-Q1). (ISI/SCOPUS Indexed Publication)
  • M.A. Kalam, H.H. Masjuki, M. Redzuan, T.M.I. Mahlia, M. A. Fuad, M. Mohibah, Ku. Halim, A.Ishak and M.Khair, A.Shahrir and A.Yusoff, Experimental Test of a New Compressed Natural Gas Engine Direct Injection engine, Energy and fuel,vol.23,pp.4981-4987,2009, USA (ISI-Q1). (ISI-Indexed)
  • Kalam, M. A., Masjuki, H. H., Redzuan, M., Mahlia, T. M. I., Fuad, M. A., Mohibah, M., Halim, K. H., Ishak, A., Khair, M., Shahrir, A., Yusoff, A. 2009. Development and test of a new catalytic converter for natural gas fuelled engine Sadhana-Academy Proceedings in Engineering Sciences. (Tier 4, Impact Factor = 0.276) (ISI-Indexed)
  • Jayed, M. H., Masjuki, H. H., Saidur, R., Kalam, M. A., Jahirul, M. I. 2009. Environmental aspects and challenges of oilseed produced biodiesel in Southeast Asia Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 4.075) (ISI-Indexed)
  • Hassan, M. H., Kalam, M. A., Mahlia, T. M. I., Aris, I., Nizam, M. K., Abdullah, S., Ali, Y. 2009. Experimental Test of a New Compressed Natural Gas Direct Injection Engine Energy Fuels. (Tier 1, Impact Factor = 2.056) (ISI-Indexed)
  • M.A. Kalam, H.H. Masjuki, M. Redzuan, T. I. Mahlia, M. A.Fuad, M. Mohibah, K.H. Halim, A.Ishak,M.Khair,A.Shahrirand A.Yusoff, Development and Test of a New Catalytic Converter for Natural Gas Fueled Engine, Internationa journal of Sadhana Academy Proceedings in Engineering Sciences,Indian Academy of Sciences Bangalore 560 080, India,vol.34 (3), pp.467-481,2009 (ISI Paper) (ISI-Indexed)

2008
  • M.I. Jahirul, R. saidur, M. Hasanuzzaman, H.H. Masjuki, M.A.Kalam, A comparison of the air pollution of gasoline and CNG driven car for Malaysia, International Journal of Mechanical and Materials Engineering 2(2), pp. 130-138,2008. (SCOPUS-Indexed)
  • M.A.Kalam and H. H. Masjuki, Testing palm biodiesel and NPAA additives to control NOx and CO while improving efficiency in diesel engines, Journal of biomass and bioenergy,Vol.32, 2008,pp.1116-1122 (ISI- Q1). (ISI/SCOPUS Indexed Publication)
  • M.A.Kalam, H.H. Masjuki, M.G. Saifullah and T.B. Seng, Envo diesel test on automotive engine- an analysis of its performance and emissions results, International journal of Mechanical and Materials Engineering (IJMME), Vol. 3, No. 1, pp. 55-60,2008. (SCOPUS-Indexed)
  • M.A.Kalam and H H. Masjuki, Potential and Properties of Palm Diesel as an Alternative Fuel for Automotive Engines, International energy journal, RERIC, Thailand, vol.9, 2008, pp.37-42. (SCOPUS-Indexed)
  • Kalam, M. A., Saifullah, M. G., Masjuki, H. H., Husnawan, M., Mahlia, T. M. I. 2008. PAH and other emissions from coconut oil blended fuels Journal of Scientific Industrial Research. (Tier 3, Impact Factor = 0.387) (ISI-Indexed)
  • Kalam, M. A., Masjuki, H. H. 2008. Testing palm biodiesel and NPAA additives to control NOx and CO while improving efficiency in diesel engines Biomass Bioenergy. (Tier 1, Impact Factor = 1.779) (ISI-Indexed)
  • M A Kalam, M G Saifullah, H H Masjuki, M Husnawan and T M I Mahlia, PAH and other emissions from coconut oil blended fuels, Journal of Scientific & Industrial Research, Vol.67 (11), November 2008, pp. 1031-1035, NISCAIR Publisher. New Delhi (ISI-Q3). (ISI-Indexed)

2006
  • M.U. Aslam, H.H. Masjuki, M.A. Kalam, H. Abdesselam, T.M.I. Mahlia, M.A. Amalina, An experimental investigation of CNG as an alternative fuel for a retrofitted gasoline vehicle, International Journal of Fuel, Vol.85, 2006, pp.717-724 (ISISCI Indexed), Elsevier, UK. (ISI-Indexed)
  • M.A. Kalam, H.H. Hasjuki and Iskandar. I. Yaacob, Evaluation of exhaust emissions reduction of a retrofitted bi-fuel spark ignition engine, Journal of Energy and Environment, BUET, Dhaka, Bangladesh, Vol. 5, May 2006, pp. 101-111 (Non-ISI/Non-SCOPUS)
  • H.H. Masjuki, M.A. Kalam, M. Syazly, T.M.I Mahlia., A.H. Rahman, M. Redzuan, M. Varman, R. Saidur, and Y.H. Yau, Experimental Evaluation of an Unmodified Diesel Engine using Biodiesel with Fuel Additive, Proceedings of the first international Forum on Strategic Technology , IFOST 2006, Oct. 18-20, 2006, Korea, pp. 96-99 (ISI Paper). (ISI-Indexed)
  • Aslam, M. U., Masjuki, H. H., Kalam, M. A., Abdesselam, H., Mahlia, T. M. I., Amalina, M. A. 2006. An experimental investigation of CNG as an alternative fuel for a retrofitted gasoline vehicle Fuel (ISI-Indexed)

2005
  • M. U. Aslam, H. H. Masjuki, M. A. Maleque And M.A. Kalam, Retrofitted Engine Performance Comparison and Focus On New CNG/DI Engine, Journal of Industrial Technology, SIRIM Berhad, Malaysia 2005 Vol. 6, pp. 75- 80. 
  • M.A. Kalam, H.H. Masjuki, Effect of coconut oil blended fuels on diesel engines wear and lubrication, Journal of Lubrication science 17-4, August 2005, Vol. 17, pp. 389-402, France. 
  • M.U. Aslam, H.H. Masjuki, M.A. Kalam, H. Abdesselam and M.A. Amalina, A Comparative Evaluation of the Performance of a Gasoline and CNG Fuelled Retrofitted Spark Ignition Car Engine , Engineering Transactions, Manahakon University of Technology Thailand, Thailand, January-June 2005, vol. 8, no. 1(18), pp. 11-22 
  • M. A. Kalam, H. H. Masjuki, M.A. Maleque, M. A. Amalina, H. Abdesselam, and T.M. I. Mahlia, CO,HC and NOx Emissions Characteristics of a Retrofitted Bi- Fuel Natural Gas Engine, Hong Kong Transaction, Volume 12, No.3.pp. pp.25-30,2005. 
  • M.U. Aslam, H.H. Masjuki, M.A. Maleque and M.A. Kalam, Retrofitted engine performance and emissions comparison with gasoline and natural gas fuel, Journal of Industrial Technology, Vol. 14(2), 2005, 61-70 
  • M. A. Kalam, H. H. Masjuki, M.A. Maleque, M. A. Amalina, H. Abdesselam, T.M. I. Mahlia and M.U. Aslam, Development Of Co-Relation Between Vehicle And Stationary Dynamometer-Engine Emissions, Proceedings of ICES2005, ASME Internal Combustion Engine Division 2005 Spring Technical Conference, April 5-7, 2005, Chicago, IL, USA. Paper No. ICES2005-1066 (ISI Paper) (ISI-Indexed)
  • M. A. Kalam, H. H. Masjuki, Recent development on biodiesel in Malaysia, Journal of scientific & industrial research (India), vol. 64, November 2005, pp. 920-927(ISI-Q3). (ISI-Indexed)
  • Kalam, M. A., Masjuki, H. H. 2005. Recent developments on biodiesel in Malaysia Journal of Scientific Industrial Research (ISI-Indexed)

2004
  • M. A. Kalam and H. H. Masjuki, Emissions and deposit characteristics of a small diesel engine when operated on preheated crude palm oil\" Journal biomass & bioenergy, vol27/3, pp.289-297, 2004,UK (ISI-Q1). (ISI-Indexed)
  • Kalam, M. A., Masjuki, H. H. 2004. Emissions and deposit characteristics of a small diesel engine when operated on preheated crude palm oil Biomass Bioenergy (ISI-Indexed)

2003
  • M. A. Kalam, H. H. Masjuki, M.A. Maleque, M. A. Amalina, H. Abdesselam, and T.M. I. Mahlia, Engine Test Cell Characteristics for the Development of a New CNG/DI Engine, Journal of Mechanical Engineering, IEB, Bangladesh, 2003, Vo. ME 32, pp.11-25. 
  • M.A. Kalam, H.H. Masjuki, Effect of palm oil methyl ester and its emulsions on lubricant degradation and engine component wear, Journal of Lubrication Science, Vol. 16, No. 1, 2003, pp.57-65, France 
  • M.A. Kalam, M. Husnawan and H.H. Masjuki, Exhaust emission and combustion evaluation of coconut oil- powered indirect injection diesel engine, Journal of renewable energy, Elsevier science, vol.28/15,2003, pp.2405-2415,UK (ISI-Q2). (ISI-Indexed)
  • Kalam, M. A., Husnawan, M., Masjuki, H. H. 2003. Exhaust emission and combustion evaluation of coconut oil-powered indirect injection diesel engine Renewable Energy (ISI-Indexed)

2002
  • M.A. Kalam, H.H. Masjuki, Biodiesel from palm oil-an analysis of its properties and potential, International Journal of Biomass and Bioenergy, (Elsevier Science) 2002, vol. 23, no. 6, pp. 471-479 UK (ISI-Q1). (ISI-Indexed)
  • M.A. Kalam, H.H. Masjuki, Combustion characteristics of coconut oil in diesel engines, Engineering Transactions of MUT, Thailand, 2002, Vol.5, No. 2(13), pp.174-180. 
  • M.A. Kalam, H.H. Masjuki, Use of additive in biofuel to evaluate emissions, engine component wear and lubrication characteristics, \'Journal of Automobile Engineering (Part D), I.Mech.E\', London, 2002, pp. 751- 757 (ISI Paper). (ISI-Indexed)
  • Kalam, M. A., Majsuki, H. H. 2002. Use of an additive in biofuel to evaluate emissions, engine component wear and lubrication characteristics Proceedings of the Institution of Mechanical Engineers Part D-Journal of Automobile Engineering (ISI-Indexed)
  • Kalam, M. A., Masjuki, H. H. 2002. Biodiesel from palmoil - an analysis of its properties and potential Biomass Bioenergy (ISI-Indexed)

2001
  • M.A. Kalam, H H Masjuki, M A Maleque, A Kubo and T Nonaka, Performance, Emissions and Wear Characteristics of an Indirect Injection Diesel Engine Using Coconut Oil Blended Fuel, Final accepted for publication at \'Journal of Automobile Engineering (Part D), I.Mech.E\', London, 2001, Vol. 215, No. 3, pp.393-404 (ISI Paper). (ISI-Indexed)
  • Masjuki, H. H., Kalam, M. A., Maleque, M. A., Kubo, A., Nonaka, T. 2001. Performance, emissions and wear characteristics of an indirect injection diesel engine using coconut oil blended fuel Proceedings of the Institution of Mechanical Engineers Part D-Journal of Automobile Engineering (ISI-Indexed)

 
  • Liaquat, A. M., Masjuki, H. H., Kalam, M. A., Varman, M., Hazrat, M. A., Shahabuddin, M., Mofijur, M. 0014. Application of blend fuels in a diesel engine  (ISI-Indexed)
  • Mofijur, M., Masjuki, H. H., Kalam, M. A., Shahabuddin, M., Hazrat, M. A., Liaquat, A. M. 0014. Palm Oil Methyl Ester and Its Emulsions Effect on Lubricant Performance and Engine Components Wear  (ISI-Indexed)
  • Shahabuddin, M., Masjuki, H. H., Kalam, M. A., Mofijur, M., Hazrat, M. A., Liaquat, A. M. 0014. Effect of Additive on Performance of CI Engine Fuelled with Bio Diesel  (ISI-Indexed)
Proceeding

2013
  • Masjuki HH, Kalam MA, Mofijur M, Shahabuddin M. High quality biodiesel as a renewable energy source: Environment aspects and Challenges. EnCon 2013, 6th Engineering Conference, "Energy and Environment" 2nd -4th July 2013, Kuching Sarawak, Malaysia. (Non-ISI/Non-SCOPUS)

2011
  • 1. A.M. Liaquat, M.A. Kalam, H.H. Masjuki, M.H. Jayed. ¿Engine Performance and Emissions Analysis using ¿Envo Diesel¿ and Coconut Biodiesel Blended Fuel as Alternative Fuels.¿ 2011 2nd International Conference on Environmental Science and Technology - ICEST 2011. (Accepted for presentation). To be held from Feb. 26 ¿ 28, 2011, Singapore. (Non-ISI/Non-SCOPUS)

2010
  • A.M. Liaquat, M.A. Kalam, H.H. Masjuki, M.H. Jayed. ¿Biodiesel: The fuel of future for developing countries. Viewpoint.¿ The 3rd AUN/SEED-Net Regional Conference on New & Renewable Energy (RCNRE 3/2010), Vistana Hotel, Penang, Malaysia, 13 - 14 October 2010. (Non-ISI/Non-SCOPUS)
  • A.M. Liaquat, H.H. Masjuki, M.A. Kalam, A. Rasyidi. ¿Experimental Analysis of Wear and Friction Characteristics of Jatropha Oil added Lubricants.¿ The 2010 International Conference on Mechanical and Aerospace Engineering (ICMAE 2010), Kuala Lumpur, Malaysia, Pp. 184 - 188, 26 - 28 November, 2010. (Non-ISI/Non-SCOPUS)
  • M.A. Kalam, H.H. Masjuki, A.M. Liaquat, M.H. Jayed, F. M. Nurul. ¿Experimental study on Jatropha-Palm diesel Blends as Alternative Fuels.¿ Third International Symposium on Energy from Biomass and Waste (Venice 2010), Venice, Italy, 8 - 11 November, 2010. (Non-ISI/Non-SCOPUS)
  • HUSNAWAN, M., JAYED, M. H., MASJUKI, H. H., KALAM, M. A., MAHLIA, T. M. I., ROPANDI, M. & CHEAH, M. Y. (2010) Effectiveness of Combined Additives on Long- term Storage Stability and Fuel Properties of Palm- Biodiesel. The 2nd AUN/SEED-Net Regional Conference on New & Renewable Energy. Paper no.: B_004. Jan 21-22, 2010, Thailand. 
  • A.M. Liaquat, M.A. Kalam, H.H. Masjuki, A. Rezza, Emission Characteristics of using Different Alternative Fuels with Petroleum Diesel in a Compression Ignition (CI) Engine, International Conference on Applied Energy 2010, 21 ¿] 23 April 2010, Singapore. 
  • Md. Hazrat Ali, H. H. Masjuki, M. A. Kalam, T.M.I Mahlia, N.N.N. Ghazali; Numerical Model of Heat Transfer Study of Radiators to Enhance Cooling Performance of Internal Combustion Engine for Passenger Vehicles - A Review; Proceedings of EnCon2010 3rd Engineering Conference on Advancement in Mechanical and Manufacturing for Sustainable Environment;Kuching, Sarawak, Malaysia;April 14-16, 2010; PP 77 (ISBN: 978-967-5418-10-5). 

2009
  • 3)M.A. Kalam, H.H. Masjuki, M. A.Fuad, K.H. Halim, A.Ishak, M.Khair, A.Yusoff and A.Shahrir, Development and Experimental Test of a New Compressed Natural Gas Direct Injection Spark Ignition Engine, presented at NGV India 2009: South Asia s Natural Gas for Vehicles Conference & Exhibition, Pragati Maidan, New Delhi, March 24-26, 2009. 
  • 1) M. Husnawan, H.H. Masjuki, T.M.I. Mahlia, Saidur R, M.A. Kalam, Performance and Emissions Characterization of Diesel Engine Running With Re- formulated Palm Oil Methyl Ester-Diesel Blended Fuel, 4th International conference on thermal engineering: Theory and Application, Abu Dhabi, UAE, 12-14 January 2009, Paper No:23. 
  • 2) M.Husnawan, H.H. Masjuki, T.M.I. Mahlia, M.A. Kalam ; (2009). Lubricity Study of Waste Cooking Oil as Potential Source of Alternative Fuel for Diesel Engine, 1st Int. Workshop on New & Renewable Energy- AUN/SEED-Net, 12-13 March 2009, ITB Bandung-Indonesia, pp.77-80. 

2008
  • H. H. Masjuki, M.A.Kalam and M. Shioji, High Performance Gas Engine with Direct Injection, Procd of natural resources & energy environment, SPS-VCC program on environmental science, Engineering and Ethics, 24-25 Nov., 2008,pp.198-209. 
  • H. H. Masjuki, M.A.Kalam and M. Shioji, Feasibility of Bio-Fuels in Internal Combustion Engines, Procd of natural resources & energy environment, JSPS-VCC program on environmental science, Engineering and Ethics, 24-25 Nov., 2008,pp.150-163. 
  • M.A. Kalam, H.H. Masjuki, M. Redzuan, T.M.I. Mahlia, M. A. Fuad, M. Mohibah, Ku. Halim, A.Ishak and M.Khair, A.Shahrir and A.Yusof, Development and Test of a New Catalytic Converter for Natural Gas Fueled Engine, SAE paper no. 2008-01-1550, USA. (Non-ISI/Non-SCOPUS)

2006
  • M.A. Kalam, H.H. Masjuki, M. Syazly, M. Redzuan, H. Ramang and T.M.I. Mahlia,Fuel Additive That Cuts Emission and Increases Brake Power in a Small Bio-Fuel Diesel Engine. SAE Paper No. 2006-32-0074 [ISSN 0148- 7191], USA. 

2005
  • M.A. Kalam and H.H. Masjuki, Emissions and Deposit Characteristics of a small Diesel Engine When Operated on Preheated Crude Palm Oil. SAE Paper No. 2005-01- 3697 [ISSN 0148-7191],USA. 

2004
  • M. A. Kalam, H. H. Masjuki, M.A. Maleque, M. A. Amalina, H. Abdesselam, and T.M. I. Mahlia, Exhaust emissions based air-fuel ratio calculation for a natural gas fuelled spark ignition engine, Proceeding of ¿2nd BSME-ASME international conference on thermal engineering, 2-4 Jan. Dhaka, Bangladesh, 2004, pp. 975- 980. 
  • M.U. Aslam, H.H. Masjuki, M.A. Kalam, T.M.I. Mahlia, M.A. Amalina and H. Abdesselam, An experimental investigation on conventional NGV engine performance, Proc. of Techpos, UM, 15-16 December, 2004. 
  • M. U. Aslam, H. H. Masjuki, M. A. Maleque and M. A. Kalam, Prospect of CNG as an Automotive Fuel Instead of Gasoline, Proc. (CD version) of 7th Asia ¿ Pacific International Symposium on Combustion and Energy Utilization (15-17) Dec, 2004. Hong Kong, Paper No. 170. 
  • A. Kalam, H. H. Masjuki, M. A. Amalina, H. Abdesselam, and T.M. I. Mahlia, CO, HC and NOx Emissions Characteristics of a Retrofitted Bi-Fuel Natural Gas Engine, Proc. (CD version) of the Seventh Asia-Pacific International Symposium on Combustion and Energy Utilization (7th APISCEU), Hong Kong, December 15-17, 2004, Paper No. 138¿ 
  • M. A. Kalam, H. H. Masjuki, M. A. Amalina,H. Abdesselam, T.M. I. Mahlia and M.U. Aslam, Exhaust Emissions Characteristics of a Retrofitted Bi-Fuel Natural Gas Engine, Proc. (CD version) of Techpos 04, UM, 15-17 December 2004, Paper No: TP04-ME-017. 
  • M.A. Kalam and H.H. Masjuki, Effect of palm oil methyl ester and its emulsions on lubricant performance and engine component wear, 2004 MPOB national seminar on green and renewable biofuel, KLIA, Malaysia, 6-7 December 2004, Paper No.10. 

2003
  • M. A. Kalam, H. H. Masjuki, M.A. Maleque, M. A. Amalina,H. Abdesselam, and T.M. I. Mahlia, Z. Zainon, Air ¿Fuel Ratio Calculation from Exhaust Gas Emission of a Natural Gas Engine, Proc. Of 2nd technical postgraduate symposium, UM, 16-17 Dec. 2003,pp. 171- 177. 

2002
  • M.A. Kalam, H.H. Masjuki and M.A. Maleque, Use of additive in biofuel to improve combustion, emission and lubricant performance characteristics, Proc. of 6th Asia ¿Pacific international symposium on combustion and energy utilization, Kuala Lumpur, Malaysia, May 20-22, 2002, pp.240-245. 

2001
  • M.A. Kalam, H.H. Masjuki and M.A. Maleque, Effect of palm oil methyl ester and its emulsions on lubricant degradation and engine component wear, Proceeding of 2nd world tribology congress, Sept. 03-07, Vienna, Austria, 2001,M21, p60-64 

2000
  • M.A. Kalam, H.H. Masjuki and M.A. Maleque, Study on Alternative Fuel from Renewable Source for Partial Replacement of Diesel Fuel, Proceedings of \'Sixth APM and International Conference 2000\'\' Dhaka, Bangladesh, 27-29 January, 2000, pp.267-273. 
  • H.H. Masjuki, M.A. Kalam, and M.A. Maleque et al., Combustion Characteristics of Biological Fuel In Diesel Engine. SAE Paper No. 2000-01-0689/JSAE Paper No. 20066574 [ISSN 0148-7191],USA. 
  • H. H. Masjuki, M. A. Kalam and M. A. Maleque, Wear and Lubrication Characteristics of a Diesel Engine using Biofuel as an Alternative Fuel, Presented on \'International Conference on Tribology\', Nagasaki, Japan, 29 Oct.- 2 Nov., pp.171-176, 2000 
  • M.A. Kalam, H.H. Masjuki and M.A. Maleque. Effect Of Biofuel On Environment, Presented on \"Malaysian Science And Technology Congress 2000\", 16-18 October, 2000 

1999
  • M.A. Kalam, H.H. Masjuki and M.A. Maleque, Polycyclic Aromatic Hydrocarbon and other Emissions from Biofuel Based Alternative Fuels, Proceedings of \'Renewable Energy for Poverty Alleviation (ISREPA)\', 26-27 November Dhaka, Bangladesh,1999, pp. 383-388. 
  • H.H. Masjuki, M.A. Kalam, M.A. Maleque and I.A. Choudhury, Biofuels- The Future Alternative Fuel for Diesel Engine (keynote paper), Proceedings of \'Renewable Energy for Poverty Alleviation (ISREPA)\', 26-27 November Dhaka, Bangladesh, 1999, pp.368-375. 
  • H.H. Masjuki, M.A. Kalam and M.A. Maleque, Combustion and Emission Characteristics of Biological Fuel in Diesel engine, Proceedings of \'Advances in Malaysian Energy Research 1999\', Malaysian Institute of Energy, UKM, Malaysia, 1999, pp. 173-184. 
  • H.H. Masjuki, M.A. Maleque, M.A. Kalam and M.R.Tamjis, Emission Characteristics of Biofuel in Automobile Diesel Engine, Proceedings of \'3rd SEA Regional Conference on Higher Engineering Education Network\', Philippines, 27-29 October, 1999 
  • M.A. Kalam, H.H. Masjuki and M.A. Maleque, Performance and Exhaust Emission of a Small Diesel Engine using Coconut Oil as Fuel, Proceedings of ¿Small Engines, Their Fuels and The Environment (SEFE)¿, Johor Bharu, Malaysia, April 1999, pp.26-31. 

1998
  • H.H. Masjuki, M.A. Kalam, M.A. Maleque and T. Nonaka, Influence of Biofuels on Tribological Performance of a Diesel Engine, Proceedings of \'The 7th JSPS-VCC seminar on integrated engineering\', University of Malaya, Kuala Lumpur, Malaysia, 7th-8th December 1998, pp.450-455. 
  • H. H. Masjuki , M.A. Kalam, M.A. Maleque, T. Sohaimi and N. Mokther, Performance and Exhaust Emissions of Compression Ignition Engine Fuelled with Coconut Oil and Palm Olein, Proceedings of ¿1998 Porim International Biofuel and Lubricant Conference\', pp. 75-83, 4-5 May, 1998, Kuala-Lumpur, Malaysia. 

1997
  • H. H. Masjuki and M.A. Kalam, Exhaust Emissions of C.I Engine Operation on Palm Oil Methyl Esters and its Emulsions, Proceedings of \'International Symposium on Advances in Alternative & Renewable Energy\', Johor Bahru, Malaysia, 22-24 July, 1997, pp. 460-467. 
Extended Abstract

2008
  • M.A.Kalam, H.H. Masjuki and Juzailie, Characterization of friction and wear characteristics of waste vegetable oil contaminated lubricant by using four-ball machine, Procd of 2nd International Conference on Advanced Tribology (iCAT), 3-5 Dec, Singapore, 2008, pp.266-267, Paper No. iCAT139. 

AREAS OF RESEARCH
(Project title), (Role), (From)-(Until), (Level), (Source).


  • Development And Testign A Conversion At Compressed Natural Gas Dedicated Port Injection (Cng-Pi) System To Compressed Natural Gas Direct Injection System (Cng-Di), Principal Investigator(PI), 2014 - 2017, Postgraduate Research Grant (PPP) - Research, (National)
  • Development and testing a conversion at compressed natural gas dedicated port injection (CNG-PI) System to Compressed Natural Gas Direct Injection System (CNG-DI)(Project number:PG105-2013B, RM26,000)., Principal Investigator(PI), 2014 - 2016, Postgraduate Research Grant(PPP), (National)
  • Study Of Combustion Characteristics Of An Automotive Engine Fueled By Nano-organic Additives Blended Biofuel, Principal Investigator(PI), 2014 - 2017, Fundamental Research Grant Scheme (FRGS), (National)
  • Design Of A New Eco Lightweight Friction Material With Palm Oil Fiber Enrichment For Wear Characteristic Study, Principal Investigator(PI), 2013 - 2017, Program Rakan Penyelidikan UM, (University)
  • Exhaust Nanoparticles Characterization From Biodiesel Fuelled Internal Combustion Engine, Principal Investigator(PI), 2013 - 2017, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC)), (University)
  • Exhaust Nanoparticles Characterisation from Biodiesel Fuelled Internal Combustion Engine(Project Number: RP016-2012E, RM145,600)., Principal Investigator(PI), 2013 - 2017, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • Development of alternative and renewable energy carrier (DAREC) (Project No: HIRG UM.C/625/1/HIR/MOHE/ENG/60, RM 5 mil.), Co-Investigator, 2013 - 2015, High Impact Research (HIR), (National)
  • Optimization and study on performance, combustion characteristics and emissions of Jatropha-Palm biofuel blends in compression ignition engine (Project Number: PG045-2012B, RM21,890)., Principal Investigator(PI), 2013 - 2015, Postgraduate Research Grant(PPP), (National)
  • Optimization And Study On Performance, Combustion Characteristic And Emissions Of Jatropha-Palm Biofuel Blends In Compression Ignition Engine, Principal Investigator(PI), 2013 - 2016, Postgraduate Research Grant (PPP) - Research, (National)
  • Design of a new ECO lightweight friction materialwith palm oil fiber enrichment for wearcharacteristics study (Project Number:CG060-2013,RM143,750)., Principal Investigator(PI), 2012 - 2017, Postgraduate Research Grant(PPP), (National)
  • STUDY ON NOX AND IGNITION CHARACTERISTICS OF A JATROPHA-PALM BIODIESEL BLENDED FUEL, Principal Investigator(PI), 2012 - 2014, Postgraduate Research Grant (PPP) - Research, (National)
  • Automobiles fuel economy standards and label: implementation possibilities in Malaysia (HIRgrant, RM 190 mil.)., Co-Investigator, 2011 - 2015, High Impact Research (HIR), (National)
  • Experimental investigation of new bioenergy sources for biofuel from tropical biodiversity (HIR grant, RM200mil.)., Co-Investigator, 2011 - 2015, High Impact Research (HIR), (National)
  • Clean diesel technology for military and civilian transport vehicles (HIR grant, RM 5.50mil.), Co-Investigator, 2011 - 2015, High Impact Research (HIR), (National)
  • 1-D and 3-D CFD Models to predict and optimize the transient hydraulics in automotive (University Grant, RM 30,600), Principal Investigator(PI), 2011 - 2012, Postgraduate Research Grant(PPP), (National)
  • Study on adiabatic flame temperature characteristics for nitrogen oxides emissiion mitigation in spark ignition engine using bioethanol blended fuel (Project number: FP020-2011, RM115,000)., Principal Investigator(PI), 2011 - 2014, Fundamental Research Grant Scheme (FRGS), (National)
  • Study on noise and exhaust emissions of a biodiesel fueled engine (Project number: PS114-2010A, RM2,563)., Principal Investigator(PI), 2010 - 2011, Postgraduate Research Grant(PPP), (National)
  • Palm diesel properties enhancement study for automotive application (Projectnumber:PS074-2009B, RM29,955)., Principal Investigator(PI), 2009 - 2010, Postgraduate Research Grant(PPP), (National)
  • EXTENSIVE STUDIES ON FAME OXIDATION AND THERMAL STABILITY, Principal Investigator(PI), 2009 - 2011, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • Extensive Studies on Fame Oxidation and Thermal Stability (Project number: RG040-09AET,RM180,000)., Principal Investigator(PI), 2009 - 2012, Geran Penyelidikan Universiti Malaya (UMRG), (National)
  • Study on biofuel properties for internal combustion engine(Project Number: PS090-2009C, 24,127), Principal Investigator(PI), 2009 - 2011, ScienceFund, (National)
  • STUDY ON BIOFUEL PROPERTIES FOR INTERNAL COMBUSTION ENGINE, , 2009 - 2011, Postgraduate Research Grant (PPP) - Research, (National)
  • Time-Based/Transient Simulation of Engine Coolant Peak Temperature After Key-Off(Techno Fund Proejct, RM538,600)., Co-Investigator, 2009 - 2012, ScienceFund, (National)
  • Extensive studies on single cylinder diesel engine test characteristics using palm oil diesel as an alternative fuel (Project number: FS218-2008A, RM60,000)., Principal Investigator(PI), 2008 - 2008, Short Term Research Fund (Vote F)(PJP), (National)
  • Study on combustion, noise and exhaust emissions characteristics of a biodiesel fueled engine (Project Number: PS065-2008C, RM15,600)., Principal Investigator(PI), 2008 - 2009, Postgraduate Research Grant(PPP), (National)

CONSULTATION PROJECT/CONSULTANCY
(Project title), (Role), (From)-(Until), (Organisation).


  • Four ball and SEM-EDX test for biodiesel samples, 2016-2016, Md Abul Kalam Azad
  • Biodiesel fuels test at engine tribology laboratory, 2016-2016, CGUniversity Australia
  • OIl lubricity Analysis using four ball operating system, 2016-2016, Mr Leon Sim
  • Biodiesel Fuel Testing at Engine Tribology Laboratory, 2015-2015, Faculty Science, UM
  • PhD Thesis review from India, 2014-2014, India
  • Biodiesel Fuel Testing, 2013-2013, UPM
  • Few journal papers review (under Q1 journal)., 2012-2012, Energy Journal
  • Internal/external examiners for Ph.D., MEngSc. and M.Eng. in 2012, 2012-2012, UM, Unimas
  • Materials Tribo Testing, 2011-2011, UKM
  • Lubricant Testing, 2011-2011, Oleon Sdn Bhd
  • Biodiesel Testing, 2010-2010, UPM
  • Biodiesel Testing, 2010-2010, UNIMAS
  • Biodiesel Testing, 2009-2009, Science Faculty, UM
  • Fuel efficient booster testing at engine tribology laboratory, UM, 2008-2008, NEW WORLD MARKETING SDN BHD
  • Fuel Additive Testing at Engine Tribology Laboratory, UM, 2008-2008, DXN BIOTECH CONSULTANTS SDN.BHD.
  • Lubricant Oil Test (EVP Oil) in Multycylinder engine, 2008-2008, ABEX MANUFACTURING SDN.BHD
  • Lubricant test at engine tribology laboratory, UM, 2007-2007, Quantum Global Trading Sdn Bhd
  • Biodiesel fuel testing at engine tribology laboratory, UM., 2007-2007, UNITEN

AWARDS AND RECOGNITIONS
(Name of Award), (Awarding Institution), (Year Awarded), (Level).


  • The Certificate of Reviewing -Elsevier Reviewer Recognition, The Editor of Applied Surface Science, Elsevier, Amsterdam, 2016, (International)
  • External Judge: to Judge The Mechanical Engineering Invention and Innovation Competition, Uniten, Malaysia, 2015, (National)
  • Utem Research and Innovation Expo 2015. (27-28 October 2015), Utem, Malaysia, 2015, (National)
  • External Judge: to Judge The Mechanical Engineering Invention and Innovation Competition, Uniten, Malaysia, 2014, (National)
  • Bronze Medal:Development of a New Natural Gas Powered Motorcycle in Malaysia , Research Exhibition for The Category of Invention & Innovation , University of Malaya, July 26-28, 2007., University of Malaya, 2007, (University)
  • Bronze Medal:Development of Additive Added Biofuel to Cut Emissions and Increases Engine Brake Power, Research Exhibition for The Category of Invention & Innovation , University of Malaya, July 18-20 , 2006., University of Malaya, 2006, (University)
  • Gold Medal: Modification, Test and Optimization of a New Direct Injection Natural Gas Engine, Research Exhibition for The Category of Invention & Innovation , University of Malaya, July 18-20 , 2006., University of Malaya, 2006, (University)
  • Silver Medal: Biofadd Cuts Emissions and Increases Performance When Fuelling An Unmodified Diesel Engine, 17th International Invention Innovation Industrial Design & Technology Exhibition 2006 (Itex 2006), Kuala Lumpur, Malaysia, 19th-21st May, 2006., International Invention Innovation Industrial Design & Technology Exhibition 2006 (Itex 2006), 2006, (International)
  • Gold Medal: Development of a New Cngdi Car , 17th International Invention Innovation Industrial Design & Technology Exhibition 2006 (Itex 2006), Kuala Lumpur, Malaysia, 19th-21st May, 2006., International Invention Innovation Industrial Design & Technology Exhibition 2006 (Itex 2006), 2006, (International)
  • Bronze Medal:a Comparative Evaluation of The Performance of a Petrol and Cng Fuelled Modified Car Engine , Research Exhibition for The Category of Invention & Innovation, University of Malaya, June 14-17, 2005., University of Malaya, 2005, (University)
  • Silver Medal:Use of Coconut Oil as An Alternative Fuel for Diesel Engine , Research Exhibition for The Category of Invention & Innovation , University of Malaya, June 14-17, 2005., University of Malaya, 2005, (University)
  • Silver Medal:Development of First Natural Gas Engine in Malaysia Research Exhibition for The Category of Invention & Innovation , University of Malaya, June 14-17, 2005., University of Malaya, 2005, (University)

PRESENTATIONS
(Title), (Event), (Date Presented), (Organiser), (Level).


PRESENTER
  • Development and Experimental Test of a New Compressed Natural Gas Direct Injection Spark Ignition Engine , South Asia s Natural Gas for Vehicles Conference & Exhibition, 2009-03-23 to 2009-03-27, NGV India 2009, (International)
  • Emission Characteristics of using Different Alternative Fuels with Petroleum Diesel in a Compression Ignition (CI) Engine, Proceedings of the international conference on Applied Energy (ICAE 2010), 21-24 April, 2010., International Conference on Applied Energy 2010, 2010-04-21 to 2010-04-23, National University of Singapore, (International)
  • Effect of antioxidant added coconut biodiesel blends on emission characteristics of a heavy-duty diesel engine, 2013 International conference on frontiers of environment, energy and bioscience, 2013-10-24 to 2013-10-25, (International)
ORAL
  • Performance and Emissions Characteristics of Coconut Biodiesel Fuel, ASME2012 Internal Combustion Engine Division FAll Technical Conference, Sept 23-26,2012 Vancouver, Canada., 2012-09-23 to 2012-09-26, ASME, USA, (International)
  • Effect of DLC coating on wear and friction characteristics, 2014 International Conference on Engineering Tribology Technology (ICETT 2014), 2014-11-21 to 2014-11-23, Taiwan society of Tribology Technology, (International)
  • FTIR and 1H NMR analysis of water emulsified palm biodiesel with span 81, International conference on innovative research in engineering, science and management (ESM-2015), 2015-09-20 to 2015-09-23, Academic Science. India, (International)
  • Evaluation of lubricating performance of biodegradable moringa olefera oil, 2nd Technology and innovation (TECHON) 2016 conference, 2016-05-24 to 2016-05-26, Poly Technique Institutes, Malaysia, (National)
OTHERS
  • Combustion and emission of biodiesel fuels in a diesel engine, International conference on green energy & expo, 2015-09-21 to 2015-09-23, OMICS International applaud, (International)

EXPERT LINKAGES
(Linkages Description), (Organisation), (Year of Involvement), (Duration), (Level).


  • Research Collaborations, NCKU, Taiwan, 2013, 12, (University)

EXPERT/TECHNICAL CONTRIBUTIONS
(Activity), (Organisation), (Role), (From)-(Until), (Level).


  • International Journal Paper Reviewers, Journal of Energy, Applied Energy, Energy and fuel, etc., Resource Person, 2007-2015, (International)

EVALUATION ACTIVITIES
(Description), (Evaluation Activity),(Year).


  • M.Eng.Sc Thesis review -Sundus Fatima, Thesis ,  (2016 - 2016)
  • Review of M.Eng.Sc Thesis from UNIMAS, Thesis ,  (2016 - 2016)
  • Review book chapter, Book ,  (2016 - 2016)
  • M.Eng Thesis review, Thesis ,  (2016 - 2016)
  • PhD Thesis review (Anna University, India), Thesis ,  (2016 - 2016)
  • Master thesis examination: Course work: Student Name: Osman Ibrahim, Thesis ,  (2015 - 2015)
  • Assessment of progress report for M.Eng.Sc students: Mohammad Arman Bibria KGA110062 on 20th Nov 2013; Jakaria KGA120069 on 30th Oct. 2013; Arbab KGA110046 on 29Setp 2013, Faizul KHA110066 on 29th May 2013., Thesis ,  (2013 - 2013)
  • Internal examiners for TWo PhD thesis (suzan KHA100025and abdul aziz KHA100071), Thesis ,  (2013 - 2013)
  • HAZMAT-D-09-03227 R1-PM, Carbon and PAH Emissions from a diesel generator fuelled with soy-biodiesel blends., Article In Journal ,  (2010 - 2010)
  • Mohammed Dhia Shaker Salim, Three Dimensional Modeling For Metal Projectiles, Plate And Human Thorax Using Finite Element Technique, Thesis ,  (2010 - 2010)
  • Thesis of M.Eng.:MOHAMED HAMID ELSHEIKH YOUSEF, Effect of Cut-Out on the Bucking Behaviour of Composite Plate., Thesis ,  (2010 - 2010)
  • Mukhlled Jabbar Kamel Finite Element Simulation Of Ballistic Impact On Metal And Composite Plates., Thesis ,  (2010 - 2010)
  • Leong Kin Yuen (KGH 080008), Application of nanofluid in engine cooling, Revision Submitted: 10-12-2009, Defence on: 26/01/2010., Thesis ,  (2010 - 2010)
  • International Journal of the air & waste management association (Q1 Journal), Article In Journal ,  (2009 - 2010)
  • International Journal of hazardous materials (Q1Journal), Article In Journal ,  (2009 - 2010)
  • International Journal of Atmospheric Environment (Q1 Journal), Article In Journal ,  (2009 - 2010)
  • International Journal of Bioresources Technology (Q1 Journal), Article In Journal ,  (2009 - 2010)
  • International Journal of Fuel processing Technology (Q1 Journal), Article In Journal ,  (2009 - 2010)
  • Karam S. Khalid, Effect of Geometry and Crushing Behaviour of Energy Absorption Capability in Automotive Applications., Thesis ,  (2009 - 2009)
  • Laith Q. saeed, Mechanical Behaviour of Composite Tubes Under Internal Pressure., Thesis ,  (2009 - 2009)
  • Elhadi Elrashid Ahmed Ibrahim Daggig, Experimental study of a gasoline engine using bioethanol as an alternative fuel, Completed (Degree) January 2010., Thesis ,  (2009 - 2010)
  • International Journal of Energy & Fuels (Q1 Journal), Article In Journal ,  (2009 - 2010)
  • Reviewer: International Journal of Energy (Q1 Journal), Article In Journal ,  (2008 - 2010)
  • Yong Jow Huey, Techno-Economic Analysis of Palm Oil Mill waste Power Generation for Grid-Connected., Thesis ,  (2008 - 2008)

CONTRIBUTION TO SOCIETY
(Contribution To Society), (Level), (Start Date), (End Date).


  • Give a talk on " R&D development on quality paper publications course" at MPOB, (Government), 05/04/2016 until 05/04/2016
  • Biomass working group member at SIRIM, (Government), 24/12/2015 until 31/12/2016
  • As Reviewer of "Asean Journal on Science & Technology for Development", (National), 05/05/2015 until 20/05/2015
  • International Journal Reviewer (Q1 papers) for few journals, (International), 01/01/2013 until 31/12/2014
  • Member of Mytribos-Malaysian Tribology Society, (National), 01/01/2011 until 28/02/2015

INTELLECTUAL PROPERTY RIGHTS
(Product Name), (Type), (Reference), (Year), (Level).


  • CNGDI Engine, PATENT,  , (INTERNATIONAL)

SUPERVISION


POST GRADUATE STUDENT
(Name of Degree), (Name of Candidates), (Title of Thesis), (Academic Session)

Completed
  • Masters Degree, Mohammad Monirul Islam (m.eng.sc.), Improvement of Cold Flow Properties of Biodiesel Using Different Additives and Their Effect on Reducing Exhaust Emission, 2014/2015
  • Masters Degree, Md. Ruhul Amin (m.eng.sc.), Effect of different catalyst on Biodiesel production from non-edible sources, 2014/2015
  • Masters Degree, Syeda Reham Shahed (m.eng.sc), Effect of emission in biodiesel in diesel engine, 2014/2015
  • Masters Degree, Kazi Imdadul Hassan (m.eng.sc.), Effect of different additives with biodiesel on engine operating system, 2014/2015
  • Doctoral Degree (phd), Arslan (ph.d.), Tribological performance of diamond like carbon (DLC) coating on the direct acting cam/tappet intraction., 2013/2014
  • Masters Degree, Mohammad Mosarof Hossain (m.eng.sc.), Tribological performance of biodiesel fuels, 2013/2014
  • Doctoral Degree (phd), Rehan (ph.d.), Tribological performance of diamond like carbon (DLC) coating on the direct acting cam/tappet intraction., 2013/2014
  • Doctoral Degree (phd), Mubashir (ph.d.), numerical and experimental study of piston assembly lubrication, 2013/2014
  • Masters Degree, Shancita Islam (m.eng.sc), Idling reduction strategies to improve fuel economy and exhaust emission of transport vehicles., 2013/2014
  • Masters Degree, Rashedul Hasan Khondoker (m.eng.sc), Effect of additives on performance , emission and combustion characteristics of a CI engine fulled with neem oil biodiesel., 2013/2014
  • Masters Degree, Mohammad Rashed Mia (m.eng.sc), Experimental investigation of performance & regulated emission of diesel engine with calophyllum inophyllum biodiesel blends with different antioxidant concentration ., 2013/2014
  • Masters Degree, Mohammad Ashraful Alam (m.eng.sc), Combustion flame characteristics of biofuels using in a diesel engine, 2013/2014
  • Masters Degree, Md. Abdul Wakil (m.eng.sc), Assessment of rice bran oil as biodiesel and evaluate its performance and emission, 2013/2014
  • Doctoral Degree (phd), Mubashir Gulzar, Wear and friction study of piston-cylinder and friction study of the piston-cylinder sliding friction using TMP bio lubricant sliding friction using TMP bio lubricant, 2013/2014
  • Masters Degree, Fairuz Fazillah Shuhimi (m.eng.sc.), Tribological performance of palm shell materials, 2013/2014
  • Masters Degree, Md. Joynul Abedin (m.eng.sc), Thermal balance of international combustion engines using alternative fuels, 2012/2013
  • Masters Degree, Sanjid Ahmed Patwary (m.eng.sc), Study on master oil and other feedstock for biodiesel production and applications in a diesel engine, 2012/2013
  • Masters Degree, Ali Shahir Shawkat (m.eng.sc), Diesterol-A diesel extender option in compression ignition engine, 2012/2013
  • Masters Degree, Kh. Abu Hasan Al Mahmud (m.eng.sc), Diamond like carbon coating in engine cylinder, 2012/2013
  • Masters Degree, S M Ashrafur Rahman (m.eng.sc), A study of Idling Reduction technologies for tropical countries, 2012/2013
  • Masters Degree, Md. Habib Ullah (m.eng.sc), Development of biolubricant using non-edible oil sources, 2012/2013
  • Masters Degree, Nazliah Harun Binti Md. Husain (m.eng.), Study On Particulate Matter Emission Characteristics Of A Diesel Engine Using Various Biodiesel Fuel(degree completed), 2011/2012
  • Masters Degree, Md. Masum Billah (m.eng.sc), Study on adiabatic flame temperature to reduce NOx emissions, 2011/2012
  • Masters Degree, Md. Palash Sarker (m.eng.sc.), Investigation of NOx reduction strategy of a diesel engine using jatropha biodiesel and its blendsAdiabatic flame temperature to reduce NOx emissions, 2011/2012
  • Masters Degree, Islam Mohammad Rizwanul Fattah (m.eng.sc), Study on the influence of jatropha biodiesel anf its blends over air and noise pollution, 2010/2011
  • Doctoral Degree (phd), Teoh Yew Heng (ph.d.), A study on emission and performance of a Homogeneous charge cpmpression ignition engine fueled with biodiesel, 2010/2011
  • Masters Degree, Pang Suh Chyn(m.eng.sc), 1D thermo hydraulic model and 3D CFD model to predict and optimize the transient hydraulics in Automotive Cooling Networks(Degree completed), 2010/2011
  • Doctoral Degree (phd), Nurin Wahidah Mohd Zulkifli (ph.d.), Tribological studies and performance evaluation of palm diesel fuelled compression ignition engine, 2010/2011
  • Masters Degree, Md. Mofijur Rahman (m.eng.sc.), Experimental studies of biodiesel fuel from edible and non-edible oil sources in a diesel engine(Degree completed), 2010/2011
  • Masters Degree, Ng Kim Hai (m.eng.), Elastic-Plastic Deformation Under High Loaded Cylindrical Contacts, 2009/2010
  • Masters Degree, Lenny Yusnita Bt Mustafah (m.eng.), DLC coating on compressor frictional surface for air-con application, 2009/2010
  • Masters Degree, Mohd Shamsuric Bin Anwar (m.eng.), Vegetable oil as biolubricant for air-con compressor, 2009/2010
  • Masters Degree, Navin A/l Ramasamy (m.eng.), Oxidation stability of biodiesel fuel (Degree completed), 2009/2010
  • Masters Degree, Mohd Hasnun Arif Bin Hassan (m.eng.), Design of a dynamometer coupling shaft (Degree completed), 2009/2010
  • Masters Degree, Mohd Azan Bin Mohammed Sapardi (m.eng.), Comparative study on performance and emission characteristics on Jatropha Oil Methyl esters Biodiesel with Diesel (Degree Completed), 2009/2010
  • Masters Degree, Md. Hazrat Ali (m.eng.sc.), Trasnsient simulation of engine coolant system (Degree completed), 2009/2010
  • Masters Degree, Mohd Taufik Bin Taib (m.eng.), Study On Elastic-Plastic Deformation Under High Loaded Spherical Contacts (Degree completed), 2009/2010
  • Masters Degree, Elhadi Elrashid Ahmed Ibrahim Dagging (m.eng.), Study of gasoline engine using pure bioethanol as an alternative fuel (Degree Completed), 2008/2009
  • Masters Degree, Md. Jayed Hussan (m.eng.sc), Palm diesel properties enhancement study for automotive application(Degree Completed), 2008/2009
  • Doctoral Degree (phd), Liaquat Ali Memon (ph.d), Study on combustion, noise and exhaust emission charecterictics of biodiesel fueled engine, 2008/2009
  • Masters Degree, Rahmath Ali Rasuldeen (m.eng.), Study on bearing failure of rapid Kl light train (Degree Completed), 2008/2009
  • Masters Degree, Yasir Abdelmonim (m.eng.), Experimental study of a gasoline engine using bioethanol as an alternative fuel (Degree Completed), 2007/2008

Ongoing
  • Masters Degree, Muhammad Syahir Amzar Bin Zulkifli (m.eng.sc.), Effects of Ionic liquids as Bio-based Lubricant Additive on Tribological Characteristic and Engine Performance, 2015/2016
  • Masters Degree, Abdul Mannan (m.eng.sc.), Wear and friction study using different materials with biolubricants, 2014/2015
  • Doctoral Degree (phd), Navin A/l Ramasamy (ph.d), Piston friction analysis using different biolubricant, 2013/2014
  • Doctoral Degree (phd), Mohammad Edilan Bin Mustaffa (ph.d.), Study of a dedicated natural gas engine converted from gasoline engine, 2012/2013
  • Doctoral Degree (phd), How Heoy Geok (phd), A comparative study & optimization on performance, combustion characteristics, emissions and wear of jathropha biofuel in compression ignition engine, 2010/2011
FIRST DEGREE/DIPLOMA/PRE-DEGREE
(Course Title), (Academic Session), (No. of Candidates)

Completed
  • BFSC contour and Nanoparticles measurement for biodiesel fuel, 2013/2014, 2
  • Integrated Design Project, 2012/2013, 15
  • LI (KMEM3194), 2012/2013, 6
  • Undergraduate thesis sesi 1 and sesi 2 of 2011/2012, 2011/2012, 11
  • Underegraduate Thesis (KMEM 4181) sesi 1 and KMEM4182 Sesi 2, 2010/2011, 9
  • Capstone (KMEM 3173), 2010/2011, 6
  • Capstone (KMEM 3173), 2009/2010, 6
  • Biodiesel,Lubricant and Engine Testing (KMEM 4181 (sesi 1) KMEM4282 (sesi 2)., 2009/2010, 7
  • LI (KMEM 3194), 2009/2010, 7

Ongoing
  • (1) Biodiesel emulsion, and (2) Particulate emission at engine Idling condition., 2014/2015, 2

TEACHING
(Course Title), (Academic Session), (No of Student), (No of Contact Hours).


POST GRADUATE
  • INTERNAL COMBUSTION ENGINE, 2016/2017(1), 19, 42
  • INTERNAL COMBUSTION ENGINE, 2016/2017(2), 6, 0
  • TRIBOLOGY, 2016/2017(2), 7, 0
  • TRIBOLOGY, 2015/2016(2), 27, 48
  • INTERNAL COMBUSTION ENGINE, 2015/2016(2), 6, 48
  • TRIBOLOGY, 2014/2015(1), 20, 48
  • INTERNAL COMBUSTION ENGINE, 2014/2015(1), 15, 48
  • INTERNAL COMBUSTION ENGINE, 2012/2013(2), 21, 42
  • TRIBOLOGY, 2012/2013(1), 19, 42
  • NANO TECHNOLOGY, 2012/2013(1), 9, 42
  • Tribology, 2011/2012(2), 13, 62
  • NANO TECHNOLOGY, 2011/2012(1), 6, 60
  • INTERNAL COMBUSTION ENGINE, 2011/2012(2), 28, 62
  • TRIBOLOGY, 2010/2011(2), 36, 57
  • TRIBOLOGY, 2009/2010(2), 16, 42
FIRST DEGREE
  • GREEN FUELS, 2016/2017(1), 46, 28
  • INTERNAL COMBUSTION ENGINE, 2016/2017(2), 16, 43
  • STATICS, 2016/2017(1), 96, 42
  • INTERNAL COMBUSTION ENGINE, 2015/2016(2), 33, 37
  • FLUID MECHANICS OF ENGINEERING, 2014/2015(1), 45, 45
  • THERMODYNAMICS AND FLUID MECHANICAL EQUIPMENT IN BUILDINGS, 2013/2014(1), 47, 44
  • INTERNAL COMBUSTION ENGINE, 2012/2013(1), 46, 37
  • THERMODYNAMICS AND FLUID MECHANICS, 2012/2013(1), 54, 43
  • THERMODYNAMICS, 2012/2013(2), 27, 42
  • Internal combustion engine, 2011/2012(1), 53, 62
  • THERMODYNAMICS AND FLUID MECHANICAL EQUIPMENT IN BUILDINGS, 2011/2012(1), 68, 62
  • THERMODYNAMICS, 2011/2012(2), 33, 62
  • ENGINEERING MECHANICS, 2010/2011(1), 56, 57
  • Foundation of Materials science, 2010/2011(2), 112, 71
  • BASIC MATERIALS SCIENCE, 2010/2011(1), 156, 71
  • INTERNAL COMBUSTION ENGINE, 2010/2011(2), 57, 57
  • ENGINEERING MECHANICS, 2009/2010(2), 59, 42
  • FOUNDATION OF MATERIALS SCIENCE, 2009/2010(1), 279, 101
  • Internal combustion engine, 2009/2010(1), 77, 62