Curriculum Vitae

DR. JUDHA PURBOLAKSONO

Associate Professor
  • Department of Mechanical Engineering
    Faculty of Engineering
  • judha

BIOGRAPHY

 

Let us always refer to Al-Quran and Sunnah Rasulullah to guide our daily life while the end of the world is approaching .

 

ACADEMIC QUALIFICATION

  • PhD (London), (Computational Solid Mechanics)
    Queen Mary College, London
  • MEng (ITB, Bandung), (Mechanical Engineering)
    Institut Teknologi, Bandung, Indonesia
  • BEng (UGM, Yogyakarta), (Mechanical Engineering)
    Universiti Gadjah Mada, Indonesia

ADMINISTRATIVE DUTIES

  • Program Coordinator for Manufacturing Engineering
    01 Jul 2011 - 30 Jun 2013 (Department of Engineering Design & Manufacture, Faculty of Engineering)
  • Committee Member of Undergraduate
    01 Jul 2011 - 30 Jun 2013 (Department of Engineering Design & Manufacture, Faculty of Engineering)
  • Committee Member of Postgraduate
    01 Jul 2011 - 30 Jun 2013 (Department of Engineering Design & Manufacture, Faculty of Engineering)

AWARD AND STEWARDSHIP

  • Queen Mary and Westfield Studentship Award
    1999, Queen Mary and Westfield Research Council, University of London, UK,  (International)
  • Urge (university Research for Graduate Education) Scholarship Award
    1996, Ministry of National Education, Indonesia,  (National)

PUBLICATIONS

Article in Journal
  1. D. Chandra, J. Purbolaksono, Y. Nukman, S. Ramesh, H.L. Liew, M.A. Hassan. Fatigue growth of a surface crack in a V-shaped notched round bar under cyclic tension. Journal of Zhejiang University Science A 15(11): 873-882, 2014.
  2. D. Chandra, J. Purbolaksono, Y. Nukman, S. Ramesh, M. Hamdi, H.L. Liew, Fatigue crack growth of a corner crack in a square prismatic bar under combined cyclic torsion-tension loading, International Journal of Fatigue 64: 67-73 (2014).
  3. R.P. Joseph, J. Purbolaksono, H.L. Liew, S. Ramesh, M. Hamdi, Stress intensity factors of a corner crack emanating from a pinhole of a solid cylinder, Engineering Fracture Mechanics 128: 1-7, 2014.
  4. W.H. Yeo, A.T. Fry, J. Purbolaksono, S. Ramesh, H.L. Liew, J.I. Inayat-Hussain, M. Hamdi, Oxide scale growth and presumed exfoliation in a 700oC or higher steam condition: A simulation study for future operations of ultra-supercritical power plants, Journal of Supercritical Fluids 92: 215-222, 2014.
  5. W.H. Yeo, A.T. Fry, S. Ramesh, R. Mohan, H.L. Liew, J.I. Inayat-Hussain, J. Purbolaksono, Simulating the implications of oxide scale formations in austenitic steels of ultra-supercritical fossil power plants, Engineering Failure Analysis 42: 390-401, 2014.
  6. M.Z. Hamzah, W.H. Yeo, A.T. Fry, J.I. Inayat-Hussain, S. Ramesh, J. Purbolaksono. Estimation of oxide scale growth and temperature increase of high (9 12%) chromium martensitic steels of superheater tubes. Engineering Failure Analysis, In Press.
  7. Notch root strain measurement of WE43-T6 magnesium alloy using electronic speckle pattern interferometry. H.L. Liew, A. Ahmad, S. Ramesh & J. Purbolaksono. Materials and Design, 51, 206-211 (2013) (ISI/WoS Publication).
  8. Ahmad J, Rahman M.M. , Zuhairi M.H.A., Ramesh S, Hassan MA, Purbolaksono* J, High operating steam pressure and localized overheating of a primary superheater tube, Engineering Failure Analysis 26 (2012) 344 348
  9. Hamzah M.Z., Ibrahim M.L., Chye Q.H., Ahmad B, Inayat-Hussain J.I., Purbolaksono* J., Evaluation on the hardness and microstructures of T91 reheater tubes after post-weld heat treatment, Engineering Failure Analysis 26 (2012) 349 354
  10. Purbolaksono*, J., Dirgantara, T., and Aliabadi, M.H., Fracture mechanics analysis of geometrically nonlinear shear deformable plates, Engineering Analysis with Boundary Elements 36 (2012) 87 92, ELSEVIER, ISSN: 0955-7997, The Netherlands
  11. Ahmad, J., Purbolaksono*, J.,Kadir, A.K., Rahman, M.M., Failure investigation on reheater pendent tubes due to external scale exfoliation and internal scale formation, Journal of Pressure Vessel Technology, Transaction of the ASME 2011 -- Volume 133, Issue 6, 061402, ISSN: 0094-9930
  12. Ahmad, J., Purbolaksono, J., Analysis on a failed 2.25Cr-1Mo reheater bent tube at upper bank vertical tubes region, Engineering Failure Analysis, Volume 18, Issue 1, January 2011, Pages 523-529 , ELSEVIER, ISSN: 1350-6307
  13. Ahmad, J., Purbolaksono, J., Hydrogen embrittlement due to mild condensate contamination by sea water ingress through condenser tube leakages: a case study, Desalination, Volume 274, Issues 1-3, Pages 302-307, ELSEVIER, ISSN: 0011-9164
  14. Loganathan, T.M., Purbolaksono, J., Inayat-Hussain J.I., Wahab, N., Effects of carburization on expected fatigue life of alloys steel shafts, Materials & Design, 32 (2011) 3544 3547, ELSEVIER, ISSN: 0261- 3069, The Netherlands
  15. Rashid A.Z., Purbolaksono*, J., Ramesh S., Hamdi M., Ahmad A., Tarlochan F., Role of physical and mechanical properties of stainless steels in expected thermal fatigue life of plenum barrier plate of a gas turbine frame, Engineering Failure Analysis 18 (2011) 2336 2342, ELSEVIER, ISSN: 1350-6307
  16. Salman, B.H., Purbolaksono, J., Mohammed, H.A., Muhieldeen, M.W., Determination of correlation functions of the oxide scale growth and the temperature increase, Engineering Failure Analysis 18 (2011) 2260-2271, ELSEVIER, ISSN: 1350-6307
  17. Ahmad, J, Purbolaksono, J., An incident investigation on stub tube at high temperature reheater outlet header region of a power plant, Engineering Failure Analysis , ELSEVIER, Volume 17 (2010), Issue 5, Pages 1254-1259 , ISSN: 1350-6307, The Netherlands
  18. Ahmad, J, Purbolaksono, J., Hydrogen damage in rear riser water wall tube of a power plant, Engineering Failure Analysis , ELSEVIER, Volume 17 (2010), Issue 5, Pages 1239-1245, ISSN: 1350-6307, The Netherlands
  19. Ahmad, J., Purbolaksono, J., Beng, L.C., Ahmad, A., Failure evaluation on a high-strength alloy SA213-T91 superheater tube of a power generation, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 224 (4), pp. 269-273, ISSN: 0954- 4089, United Kingdom
  20. Ahmad, J., Purbolaksono, J., Beng, L.C., Failure analysis on high temperature superheater Inconel 800 tube, Engineering Failure Analysis, ELSEVIER, Volume 17 (2010), Issue 1, Pages 328-333, ISSN: 1350-6307, The Netherlands
  21. Ahmad, J., Purbolaksono, J., Beng, L.C., Thermal fatigue and corrosion fatigue in heat recovery area side wall tubes, Engineering Failure Analysis, ELSEVIER, Volume 17 (2010), Issue 1, Pages 334-343, ISSN: 1350-6307, The Netherlands
  22. Ahmad, J., Purbolaksono, J., Beng, L.C., Tube failures due to cooling process problems and foreign materials in power plants, Nuclear Engineering and Design , ELSEVIER , Volume 240 (2010), Issue 7, Pages 1882- 1886, ISSN: 0029-5493, The Netherlands
  23. Hamzah, M.Z., Purbolaksono, J., Inayat-Hussain, J.I., Nordin, N.F., Stability analysis of a gas turbine exhaust stack, Engineering Failure Analysis , ELSEVIER, Volume 17 (2010), Issue 6, Pages 1466-1474 , ISSN: 1350-6307, The Netherlands
  24. Loganathan, T.M., Purbolaksono, J., Inayat-Hussain J.I., Muthaiyah, G., Wahab, N., Pitting corrosion of triggering initial fractures of palm oil screw press machine shafts, Engineering Failure Analysis , ELSEVIER, Volume 17 (2010), Issue 5, Pages 1086-1093, ISSN: 1350-6307, The Netherlands
  25. Purbolaksono, J. and Aliabadi, M.H., Stability of Euler's method for evaluating large deformation of shear deformable plates by dual reciprocity boundary element method, Engineering Analysis with Boundary Elements Volume 34 (2010), Issue 9, Pages 819-823, ELSEVIER, ISSN: 0955-7997, The Netherlands
  26. Purbolaksono, J., Ahmad, J, Khinani, A., Ali, A.A., Rashid, A.Z., Failure case studies of SA213-T22 steel tubes of boiler through computer simulations, Journal of Loss Prevention in the Process Industries, ELSEVIER , Vol. 23 Issue 1, January 2010, Pages 98- 105, ISSN: 0950-4230, The Netherlands
  27. Purbolaksono, J., Ahmad, J., Beng, L.C., Rashid, A.Z., Ali, A.A., Khinani, A., Failure analysis on a primary superheater tube of a power plant, Engineering Failure Analysis, ELSEVIER, Volume 17 (2010), Issue 1, Pages 158-167, 2009, ISSN: 1350-6307, The Netherlands
  28. Rahman, M.M., Purbolaksono, J., Ahmad, J., Root cause failure analysis of a division wall superheater tube of a coal-fired power station, Engineering Failure Analysis , ELSEVIER, Volume 17 (2010), Issue 6, Pages 1490-1494 , ISSN: 1350-6307, The Netherlands
  29. Rashid, A.Z., Purbolaksono, J., Ahmad, A., S.A. Ahmad, Thermal fatigue analysis on cracked plenum barrier plate of open-cycle gas turbine frame, Engineering Failure Analysis, ELSEVIER, Volume 17 (2010), Issue 2, Pages 579-586, ISSN: 1350-6307, The Netherlands
  30. Ahmad, A., Purbolaksono, J., Yahya, Z., Estimating inclusion size in WE43-T6 magnesium alloys based on Gumbel extreme values, Materials Science and Engineering: A, ELSEVIER; Volumes 513-514, Pages 319- 324 : ISSN: 0921-5093, The Netherlands
  31. Ahmad, J., Purbolaksono, J., Beng, L.C., Rashid, A.Z., Ali, A.A., Khinani, A., Failure investigation on rear water wall tube of boiler, Engineering Failure Analysis, ELSEVIER, Volume 16, Issue 7, October 2009, Pages 2325-2332; ISSN: 1350-6307, The Netherlands
  32. Ali, A.A., Purbolaksono, J., Khinani, A., Rashid, A.Z., Tarlochan, F., Evaluation on internal surface crack in a compound tube, Journal of Pressure Vessel Technology, Transaction of the ASME, Volume 131, Issue 6, Pages 64501-64504, 2009, ISSN: 0094-9930, USA
  33. Othman, H., Purbolaksono, J. and Ahmad, B., Failure investigation on deformed superheater tube, Engineering Failure Analysis, Volume 16, Issue 1, January 2009, Pages 329-339, Elsevier, ISSN: 1350- 6307, The Netherlands
  34. Purbolaksono, J. and Aliabadi, M.H., Nonlinear buckling formulations and imperfection models of shear deformable plates by the boundary element method, Journal of Mechanics of Materials and Structures, Volume 4 (2009), Issue 10, Pages 1729-1740, Mathematical Sciences Publishers , ISSN: 1559-3959, USA
  35. Purbolaksono, J., Hong, Y.W., Nor, S.S.M. , Othman, H., Ahmad, B., Evaluation on Reheater Tube Failure, Engineering Failure Analysis, Elsevier, Volume 16, Issue 1, January 2009, Pages 533-537, Elsevier, ISSN: 1350-6307, The Netherlands
  36. Purbolaksono, J., Khinani, A., Ali, A.A., Rashid, A.Z., Ahmad, J., Nordin, N.F., A new method for estimating heat flux in superheater and reheater tubes, Nuclear Engineering and Design, ELSEVIER, Vol. 239 Issue 10, October 2009, Pages 1879-1884; ISSN:0029- 5493, The Netherlands
  37. Purbolaksono, J., Khinani, A., Ali, A.A., Rashid, A.Z., Nordin, N.F., Interative technique and finite element simulation for supplemental condition monitoring of water-tube boiler, Simulation Modelling Practice and Theory, ELSEVIER, Volume 17, Issue 5, 2009, Pages 897-910; ISSN: 1569-190X , The Netherlands
  38. Purbolaksono, J., Khinani, A., Ali, A.A., Rashid, A.Z., Nordin, N.F., Prediction of oxide scale growth in superheater and reheater tubes, Corrosion Science, ELSEVIER, Volume 51, Issue 5, 2009, Pages 1022-1029; ISSN:0010-938X , The Netherlands
  39. Purbolaksono, J., Ali, A.A., Khinani, A., Rashid, A.Z., Evaluation of stress intensity factors for multiple surface cracks in bi-material tubes, Engineering Analysis with Boundary Elements, ELSEVIER, Vol. 33 Issue 11, November 2009, Pages 1339-1343, ISSN: 0955-7997, The Netherlands
  40. Purbolaksono, J., Tarlochan, F., Rahman, M.M., Nordin, N.F., Ahmad, B., Failure investigation on reheater tube due to deposit and wall thinning, Journal of Failure Analysis and Prevention, Springer-ASM International, Volume 9, Issue 4, 2009, Pages 365-369; ISSN: 1547-7029, USA
  41. Purbolaksono, J. and Aliabadi, M.H., Buckling analysis of shear deformable plates by boundary element method, International Journal for Numerical Methods in Engineering (2005) 62: 537-563, ISSN: 0029-5981, Wiley Interscience, UK
  42. Purbolaksono, J., Aliabadi, M.H., Dual boundary element method for instability analysis of cracked plates, CMES-Computer Modeling in Engineering and Sciences (2005), Vol: 8, Pages: 73 - 90, ISSN: 1526- 1492, Tech Science Press, USA
  43. Purbolaksono, J., Aliabadi, M.H., Large deformation of shear-deformable plates by the boundary-element method, Journal of Engineering Mathematics (2005), Vol: 51, Pages: 211 - 230, ISSN: 0022-0833, Kluwer Publisher, The Netherlands
Article in Proceeding
  1. Purbolaksono, J., Ahmad, J., Overview on Recent Failure Investigation of Water tube Boiler in Fossil Fired Power Plants, 3rd AUN/SEED Net Regional Conference on Aerospace Engineering and Mechanical Engineering, 4-5 March 2011, Manila, Filipina.
  2. A. Khinani, A.A. Ali, A.Z. Rashid and J. Purbolaksono, Fatigue crack growth of wide flange I-beam under constant amplitude bending loading, International Joint Seminar in Engineering 2008, 4-5 August 2008, Jakarta
  3. A. Z. Rashid, A. A Ali, A. Khinani and J. Purbolaksono, Cracked Wide Flange I-Beam under Bending Loadings, International Conference on Construction and Building Technology, 16-19 June 2008, Kuala Lumpur
  4. A.A. Ali, A. Khinani, A.Z. Rashid and J. Purbolaksono, Evaluation on stress intensity factors of multiple surface cracks on the outer surface of boiler tubes by boundary element method, Malaysian Science and Technology Congress 2008, 16-17 December 2008, Kuala Lumpur
  5. A.A. Ali, A. Khinani, A.Z. Rashid and J. Purbolaksono, Evaluation on surface crack in blunt-notched cylinders, International Joint Seminar in Engineering 2008, 4-5 August 2008, Jakarta
  6. Othman,H., Purbolaksono, J., and Ahmad, B., Failure Analysis on Deformed Superheater Tubes by Finite Element Method, International Conference on Construction and Building Technology, 16-19 June 2008, Kuala Lumpur
  7. Purbolaksono*, J., Dirgantara, T., Aliabadi, M.H., Nonlinear analysis of cracked plates, Key Engineering Materials (2006), Vol: 306-308, Pages: 661 - 665, ISSN: 1013-9826, Germany
  8. Purbolaksono, J., Putra, I.S., Dirgantara, T. and Aliabadi, M.H., Simply Supported Plates with an Eccentric Circular Hole under Compressive Loads, Regional Conference on Aeronautical Science, Technology and Industry (RC-ASTI), Institute of Technology Bandung, Indonesia (2004).
  9. Purbolaksono, J. and Aliabadi*, M.H., Buckling of cracked plates, Key Engineering Materials, Vols. 251- 252 (2003) pp. 153-157, ISSN: 1013-9826, Germany
  10. Purbolaksono, J. and Aliabadi, M.H, Shear Deformable Plates Buckling by the Boundary Element Method, Advances in Boundary Element Techniques IV, University of Granada, Spain (2003).

RESEARCH PROJECT

National
  1. 2012 - 2015, High Impact Research (HIR)
    Numerical Simulations and Experimental Investigations on the Multiaxial Fatigue and Cyclic Plastic Response of the Newly Developed Aluminum Alloy and FGM for Aerospace Structures ( Principal Investigator(PI))
  2. 2011 - 2013, Exploratory Research Grant Scheme (ERGS)
    New correlation functions of temperature increase and oxide scale growth in water tube boiler ( Principal Investigator(PI))
  3. 2007 - 2009, ScienceFund
    Development of Structural Life Assessment Software (Mosti-ScienceFund) ( Principal Investigator(PI))
  4. 2005 - 2008, MOSTI (IRPA)
    Improving Boiler Tube Performance and Efficiency through Computer Modeling and Experimentation ( Principal Investigator(PI))

CONSULTANCY PROJECT

  • Fea On Prototype Structure of Tenom Pangi Trash Diverter Design, TNB Research Sdn Bhd
    01 Aug 2009 - 01 Aug 2010 (National)
  • Failure Investigation On Cracked Exhaust Stack of a Gas Turbine At Putrajaya Power Station, TNB Research Sdn Bhd
    01 Aug 2009 - 01 Aug 2009 (National)

ACADEMIC/ PROF. SERVICES

Evaluation
  1. Corrosion Science, Elsevier Science Publisher , (Reviewer)
  2. Journal of Electromagnetic Waves and Applications (JEMWA) and Progress in Electromagnetic Research (PIER, PIER B,C,M, PIER Letters, Massachusetts Institute of Technology (MIT) publications. , (Reviewer)
  3. Proceedings of the Institution of Mechanical Engineers, Part G, Journal of Aerospace Engineering , (Reviewer)
  4. Engineering Failure Analysis, Elsevier Science Publisher , (Reviewer)
  5. Applied Thermal Engineering, Elsevier Science Publisher , (Reviewer)
  6. Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science , (Reviewer)
  7. Process Safety and Environmental Protection, Elsevier Science Publisher , (Reviewer)
  8. Journal of Engineering Design, Taylor & Francis Publisher , (Reviewer)
  9. Experimental Techniques, Wiley Blackwell Publisher , (Reviewer)
  10. Desalination, Elsevier Science Publisher , (Reviewer)
  11. Materials Science & Engineering A, Elsevier. , (Reviewer)

SUPERVISION

Postgraduate Student
PhD/ Doctoral
  1. (2009) Remaining Life Estimation of T91 Steel Utilized in Power Plants, Muhamad Zamani Hamzah (M0100118)
  2. (2004) Environment-Assisted Cracking of High Strength Magnesium Alloy WE43-T6, Azmi Bin Ahmad (M0100118)
Master
  1. (2011) Nonlinear Finite Element Analysis of Corrosion Flaw in Pipeline, Zurina Binti Ahmad
  2. (2011) Acceptability of a Flaw in Pressure Vessel under Fatigue Loadings, Muhammad Ilham Bin Khalit
  3. (2009) Failure Investigation on Failed Shafts of Palm Oil Press Machine, Tamil Moli Loganathan (M0100118)
  4. (2009) Determining Correlation Functions of the Oxide scale Growth and the Temperature Increase in Water Tube Boiler, Bassam Hussein (M0100118)
  5. (2009) Creep Fatigue Analysis on Water Tube Boiler, Khalid Ghazi Al Aradi (M0100118)
  6. (2008) Determination of Stress Intensity Factor of Longitudinal Crack in Pressure Vessel, Nor Fazri Nordin (M0100118)
  7. (2008) Computations of Stress Intensity Factors of Multiple Cracks, Agung Wahyudi (M0100118)
  8. (2007) The Finite Element Method to Analyze Elasto-Fracture Mechanics Problems, Djarot Hutabri EBS (M0100118)
  9. (2007) Failure Analysis on Plenum Barrier Plate of Gas Turbine, Azri Zainol Rashid (M0100118)
  10. (2007) Evaluation of Stress Intensity Factors of Semi-elliptical Surface Tube Cracks in Compound Tubes, Aws Abid Ali (M0100118)
  11. (2007) Computation of Stress Intensity Factors Using Boundary Element Method, Yasir (M0100118)
  12. (2007) An Aternative Method for Predicting Oxide Scale Growth in Superheater and Reheater Tubes, Alfa Khinani (M0100118)
  13. (2006) Finite Element and Experimental Analysis on Deformation of Superheater Tube, Hashim Othman (M0100118)

SOCIAL RESPONSIBILITY ACTIVITIES

  • Editorial Board Member of Case Studies in Engineering Failure Analysis for a Period of 3 Years (effective from Nov. 2012)., (01 Nov 2012 - 31 Oct 2015)
  • Editorial Board Member of Makara Technology Series for a Period of 3 Years (effective from July 2012)., (01 Jul 2012 - 30 Jun 2015)
  • Providing Brief Opinions to Sea-eu-net On The Quality, Quantity, Profile and Impact of Bi-regional Science and Technology (s&t) Cooperation Between The Ten Member Countries of The Association of South-east Asian Nations (asean) and The Member- and Associated States of The European Union (eu)., (12 Aug 2010 - 15 Oct 2010)
  • Judge for Imeche UNITEN Student Chapter Pro E Challenge 2009, (16 Dec 2009 - 16 Dec 2009)