Curriculum Vitae

DR. ISWADI BIN JAUHARI

Senior Lecturer
  • Department of Mechanical Engineering
    Faculty of Engineering
  • iswadi
  • +603-79675204

ACADEMIC QUALIFICATION

  • PHD(EHIME)(2003), (Kejuruteraan Material)
    Ehime University, Japan
  • MEng(EHIME)(1997), (KEJURUTERAAN MATERIAL)
    Ehime University, Japan
  • BEng(EHIME)(1995), (KEJURUTERAAN MEKANIKAL)
    Ehime University, Japan

ADMINISTRATIVE DUTIES

  • Deputy Dean
    01 Jun 2006 - 31 Aug 2006 (Department of Mechanical Engineering, Faculty of Engineering)
  • Deputy Dean
    01 Apr 2006 - 31 May 2006 (Department of Mechanical Engineering, Faculty of Engineering)

AWARD AND STEWARDSHIP

  • Khidmat Setia 20 Award
    2017, Universiti Malaya
  • Certificate of Excellent Service
    2007, Universiti Malaya
  • Excellence Service Award
    2005, Universiti Malaya

PUBLICATIONS

Article in Journal
  1. Sultan, NM; Jauhari, I; Sabri, MFM 2019. Mechanical properties of superplastic thin boronised duplex stainless steel (DSS). MATERIALS RESEARCH EXPRESS
  2. B Ali, MFM Sabri, SM Said, NL Sukiman, I Jauhari & N Soin, High impact reliability and high temperature performance of Fe and Bi added Sn-1Ag-0.5Cu solder alloys. Journal of Materials Science: Materials in Electronics, 1-9. doi: 10.1007/s10854-017-6412-x (2017)
  3. Bakhtiar Ali,Mohd Faizul Mohd Sabri,Suhana Mohd Said,Mohammad Hossein Mahdavifard,Nazatul Liana Sukiman,Iswadi Jauhari. Microstructural Modification of Sn-0.7Cu Solder Alloys by Fe/Bi-Addition for Achieving High Mechanical Performance.Journal of Elec Materi (2017). doi:10.1007/s11664-017-5416-x
  4. Hidayah Mohd Khalid, Iswadi Jauhari, Haryanti Azura Mohamad Wali and Suhaeb Abdulrazzaq Mahmod
  5. I Jauhari, S Harun, S Jamlus, & MFM Sabri, Development of Cutting Tool Through Superplastic Boronizing of Duplex Stainless Steel, Metallurgical and Materials Transactions A, 1-7. doi: 10.1007/s11661-016-3913-9 (2017)
  6. B Ali, MFM Sabri, I Jauhari, NL Sukiman, Impact toughness, hardness and shear strength of Fe and Bi added Sn-1Ag-0.5Cu lead-free solders, Microelectronics Reliability, DOI:10.1016/j.microrel.2016.05.004, (2016)
  7. B Ali, MFM Sabri, NL Sukiman, I Jauhari, Microhardness and shear performance of Fe/Bi-bearing SAC105 solder alloys under high temperature aging, Mater Sci: Mater Electron (2016), doi:10.1007/s10854-016-5511-4 (2016)
  8. Hidayah Mohd Khalid, Siti Nur Hasan, Iswadi Jauhari. 2016. Mechanical behaviour of nanolayer hydroxyapatite (HA) coating developed through superplastic embedment of titanium (Ti) alloy. Materials Chemistry and Physics 177 314-321.
  9. Nor Taibah Taazim, Iswadi Jauhari, Yukio Miyashita, Mohd Faizul Mohd Sabri. 2016.Development and Kinetics of TiB2 Layers on the Surface of Titanium Alloy by Superplastic Boronizing. Metallurgical and Materials Transactions A, (), 1-6.
  10. DA Shnawah, MFM Sabri, SBM Said, I Jauhari, MH Mahdavifard, MBA Bashir, MH Elsheikh, Interfacial reactions between Cu substrate and Sn 1Ag 0.5 Cu solder containing 0.1 wt% Al by dipping method, Journal of Materials Science: Materials in Electronics, doi:10.1007/s10854-015-3486-1, (2015)
  11. MFM Sabri, NIM Nordin, SM Said, NAAM Amin, H Arof, I Jauhari, R Ramli and K Weide-Zaage, Effect of thermal aging on the electrical resistivity of Fe- added SAC105 solder alloys, Microelectronics Reliability, doi:10.1016/j.microrel.2015.06.123, (2015)
  12. Siti Aida Jamlus, Iswadi Jauhari, Hidayah Mohd Khalid. Mechanical and biological stability of superplastically embedded HA nanolayer deformed at high temperature. Material Science and Engineering: C 43 (2014) 566-572.
  13. Siti Aida Jamlus, Iswadi Jauhari, Hidayah Mohd Khalid. 2014. Mechanical and biological stability of superplastically embedded HA nanolayer deformed at high temperature. Materials Science and Engineering C 43 566 572
  14. A. H. M. Dom, I. Jauhari, H. Mohd Khalid, Z. M. Rosli, "Development of Hydroxyapatite Layer on Superplastic Ti-6Al-4V for Biomaterials Applications", Advanced Materials Research, Vol. 626, pp. 339-343, 2013
  15. Hidayah Mohd Khalid, Iswadi Jauhari, Adibah Haneem Mohamad Dom. Development of nanolayer HA on titanium alloy via superplastic deformation method. Metallurgical and Materials Transactions A 42 (1):219-226
  16. Hidayah Mohd Khalid, Iswadi Jauhari, Siti Aida Jamlus, Adibah Haneem Mohamad Dom. High temperature deformation of Ti Alloy superplastically embedded with HA. Materials Science and Engineering A, 534, 37-42
  17. Nor Wahida Ahamad and Iswadi Jauhari. Carburizing of duplex stainless steel (DSS) under compression superplastic deformation. Metallurgical and Materials Transactions A 43 (13): 5115-5121
  18. Sharidah Azuar Abdul Azis, Iswadi Jauhari, Nor Wahida Ahamad Improving surface properties and wear behaviors of duplex stainless steel via pressure carburizing. Surface and Coating Technology. Vol. 210 (2012) pp 142-150
  19. H.A.M Yusof,I. Jauhari and R. Saidan. Superplastic boronizing of duplex stainless steel under dual compression method. Materials Science and engineering A Volume 528, Issue 28, Pages 8106 8110
  20. Adibah Haneem Mohamad Dom,Iswadi Jauhari,Sanaz Yazdanparast,Hidayah Mohd Khalid. 2010.Embedment of HA/Ti composite on superplastic titanium alloy (Ti 6Al 4V). Materials Science and Engineering: A 527 (21- 22):5831-5836
  21. Ahamad, NW; Jauhari, I; Azis, SAA, et al. Kinetics of carburizing of duplex stainless steel (DSS) by superplastic compression at different strain rates. Materials Science and Engineering A-Structural Materials Properties Microstuctures and Processing 527(16-17):4257-4261
  22. Ahamad, NW; Jauhari, I; Azis, SAA, et al. Surface properties and activation energy of superplastically carburized duplex stainless steel. Materials Chemistry and Physics 122(2-3) 454-458
  23. Sanaz Yazdan Parast, Iswadi Jauhari, Mohsen Asle Zaeem. 2010. Implantation of HA into superplastic Ti- 6Al-4V: Kinetics and mechanical behaviors of implanted layer. Metallurgical and Materials Transactions A 42 (1):219-226
  24. Sharidah Azuar Abdul Azis, Iswadi Jauhari, Nik Rozlin Nik Masdek, Nor Wahida Ahamad and Ogiyama Hiroyuki. 2010. Surface roughness and initial pressure effect on superplastic carburizing duplex stainless steel (DSS). Defect and diffusion forum 297-301 : 227- 232.
  25. Nur Hafizah Abd Aziz, Iswadi Jauhari, Hanis Ayuni Mohd Yusof and Nor Wahida Ahamad. 2009. Influence of strain rate and strain on the surface properties in superplastically boronized duplex stainless steel (DSS). Defect and diffusion forum 283-286 :458-463
  26. R.D. Ramdan, I. Jauhari, R. Hasan and N.R. Nik Masdek. The role of strain rate during deposition of CAP on Ti6Al4V by superplastic deformation-like method using high-temperature compression test machine. Materials Science and Engineering A, Volume 477, Issues 1-2, 25 March 2008, Pages 300-305
  27. Iswadi Jauhari, Shaifulazuar Rozali, Nik Rozlin Nik Masdek and Ogiyama Hiroyuki. Surface properties and activation energy analysis for superplastic carburizing of duplex stainless steel. Materials Science and Engineering: A, Volume 466, Issues 1-2, 25 September 2007, Pages 230-234
  28. Jauhari, Hanis Ayuni Mohd Yusof, Shaifulazuar Rozali and O. Hiroyuki. Effect of powder particle sizes on the development of ultra and surface through superplastic boronizing Of duplex stainless steel. Journal of Solid Mechanics and Materials Engineering, Vol. 1 (2007) No. 4 pp.539-546
  29. Nik Rozlin Nik Masdek, Iswadi Jauhari, Raden Dadan Ramdan and Rafidah Hasan. Enhancing surface properties of fine grain duplex stainless steel via superplastic carburizing. Advanced Materials Research Vols. 15-17 (2006) pp. 768-773
  30. Nik Rozlin Nik Masdek, Iswadi Jauhari, Raden Dadan Ramdan, and Rafidah Hasan. A study on properties and kinetics of carburizing superplastic duplex stainless steel. Key Engineering Materials Vols. 326-328 (2006) pp. 1677- 1680
  31. R. Hasan, I. Jauhari, S. M. Yunus, R. D. Ramdan and N.R. Nik Masdek.2006. A study on the boronizing of duplex stainless steel. Key Engineering Materials 306- 308 : 887-891
  32. Raden Dadan Ramdan, Iswadi Jauhari, Rafidah Hasan, Nik Rozlin Nik Masdek, Fadzil Ayad Zakaria, and K. Jamuna. The effect of carbonated apatite powder size on the coating process of carbonated apatite on titanium alloy by superplastic deformation process. Key Engineering Materials Vols. 326- 328 (2006) pp. 785- 788
  33. Rafidah Hasan, Iswadi Jauhari, Hiroyuki Ogiyama, and Raden Dadan Ramdan. Compression method for superplastic boronizing of DSS. Key Engineering Materials Vols. 326- 328 (2006) pp. 1745- 1748
  34. Rafidah Hasan, Iswadi Jauhari, Hiroyuki Ogiyama, and Raden Dadan Ramdan. Effects of superplasticity in boronizing of duplex stainless steel. Key Engineering Materials Vols. 326- 328 (2006) pp. 1233- 1236
  35. Iswadi Jauhari, Ogiyama Hiroyuki and Hitoshi Tsukuda, Solid state bonding of superplastic duplex stainless steel with Carbon Steel. Mat. Sci. Research Int., 10, 2003.
  36. Ogiyama Hiroyuki, Shiraishi Tetsuro, Hitoshi Tsukuda and Iswadi Jauhari, Fatigue Properties of Superplastically Deformed Duplex Stainless Steel, Journal of Japanese Soc. Mat. Sci., 50 Sept. 2001.
Books
  1. R. Hasan, I. Jauhari, H.Ogiyama, S. M. Yunus, R. D. Ramdan and N.R. Nik Masdek, Kinetic Study on Boronized Duplex Stainless Steel, 2nd JSME/ASME International Conference on Materials and Processing 2005, Seattle, USA
  2. R. Hasan, I. Jauhari, S. M. Yunus, R. D. Ramdan and N.R. Nik Masdek, Surface Properties and Kinetics of Boronized Duplex Stainless Steel, Proceeding of the International Conference on Recent Advances in Mechanical and Materials Engineering 30-31 May 2005, Kuala Lumpur, Malaysia
  3. R.D. Ramdan, I. Jauhari, M. K. Ismail, R. Hasan, and N.R. Nik Masdek, The Optimum Quenching, Tampering Treatment for High Temperature Plastic Deformation, Proceeding of the International Conference on Recent Advances in Mechanical and Materials Engineering 30-31 May 2005, Kuala Lumpur, Malaysia
Article in Proceeding
  1. Iswadi Jauhari, Ogiyama Hiroyuki and Hitoshi Tsukuda, Superplastic Diffusion Bonding of Duplex Stainless Steel, 2nd Wold Engineering Congress Kuching.
  2. Nik Rozlin Nik Masdek, Iswadi Jauhari, Rd Dadan Ramdan and Rafidah Hasan, Superplastic Carburizing of Duplex Stainless Steel, 1st International Conference & 7th AUN/ SEED- Net Fieldwise Seminar on Manufacturing and Material Processing, 14- 15 March 2006 Kuala Lumpur.
  3. R. Hasan, I. Jauhari, S. M. Yunus, R. D. Ramdan and N.R. Nik Masdek, Surface Properties and Kinetics of Boronized Duplex Stainless Steel, International Conference on Recent Advances in Mechanical and Materials Engineering (ICRAMME) 2005, Kuala Lumpur
  4. R.Dadan Ramdan,Iswadi Jauhari,Rafidah Hasan, Nik Rozlin Nik Masdek, The Optimum Heat-treatment Process for Superplastic Deformation of Titanium Alloy, The 2nd ASEAN Science Congress and Sub Committee Conference on Material Science and Technology 2005, Jakarta
  5. Rafidah Hasan, Iswadi Jauhari, R.Dadan Ramdan, Nik Rozlin Nik Masdek, H.Ogiyama, Boronizing of Fine Microstructure Duplex Stainless Steel; Surface Properties and Kinetic Study, The 2nd ASEAN Science Congress and Sub Committee Conference on Material Science and Technology 2005, Jakarta
  6. Iswadi Jauhari, Ogiyama Hiroyuki and Hitoshi Tsukuda, Shaifulazuar Rozali, Rafidah Hasan, Solid State Bonding of Superplastic Duplex Stainless Steel with Similar Alloy and Carbon Steel, IMTCE 2004 Kuala Lumpur
  7. R. D. Ramdan, I. Jauhari, R. Hasan and H. Ogiyama, Superplastic Boronizing of High Carbon Steel, Engineering Materials Seminar and Exhibition Institut Teknologi Bandung (EMINEX), 15~16 Sept. 2004

RESEARCH INTEREST

  • Fatigue
  • Superplasticity
  • Materials Engineering

RESEARCH PROJECT

National
  1. 2019 - 2025, Government Agency
    Electrification And Renewable Energy Generation Through In-pipe Hydro System: Prototype Development ( Principal Investigator(PI))
  2. 2020 - 2021, KW PNC(JIM)
    An In-pipe Hydropower Generator ( Principal Investigator(PI))
  3. 2017 - 2019, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC))
    Fabrications And Evaluations Of In-pipe Hydro System's Components ( Principal Investigator(PI))
  4. 2017 - 2019, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC))
    Kinetic Study Of In-pipe Water Flow For Power Generation ( Co-Researcher)
  5. 2017 - 2019, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC))
    Turbine Design System For In-pipe Energy Harvesting ( Co-Researcher)
  6. 2017 - 2018, Bantuan Kecil Penyelidikan (BKP)
    Super Intensive 2-Phase Shrimp Farming Prototype using Biofloc ( Principal Investigator(PI))
  7. 2011 - 2014, Postgraduate Research Grant(PPP)
    1) Study on superplastic hardening of Ti6Al4V alloys for dental implant applications 2) Effect of superplastic deformation on boronized duplex stainless steel 3) Study on superplastic embedment of HA-Ti composite on Ti6Al4V ( Principal Investigator(PI))
  8. 2011 - 2013, Prototype Research Grant Scheme (PRGS)
    Development of cutting tolls prototype through superplastic boronizing/ carburizing ( Principal Investigator(PI))
  9. 2011 - 2013, High Impact Research (HIR)
    Superplastic effect on diffusion of boron/ carbon/ HA into alloys ( Principal Investigator(PI))
  10. 2006 - 2008, Fundamental
    Superplasticity in Metals and its Application. ( -)
  11. 2004 - 2006, IRPA
    Preparation, Characterization and Tribological Behaviour of Aluminium Alloy Based Metal Matrix Composites for Automotive Brake Rotor Applications ( -)
International
  1. 2017 - 2018, International Funding
    Micro bubble aeration system for nursery pond of shrimp Aquaculture in Malaysia: A case study under an energy, water quality and Biofloc circulation constraints ( Consultant)
University
  1. 2005 - 2006, Short Term Research Fund (Vote F)(PJP)
    Solid State Diffusion Bonding of Superplastic Duplex Stainless Steel with other Ferrous Metals ( -)
  2. 2005 - 2006, Short Term Research Fund (Vote F)(PJP)
    The Development of Implant Material for Medical and Dental Purpose by Using Superplastic Forming Method ( -)

CONSULTANCY PROJECT

  • Knowledge Transfer Program for Pacific Whiteleg Shrimp (p. Vannamei) Farming Industry (300 Hectare ), UNIVERSITI MALAYSIA TERENGGANU
    01 Dec 2015 - 01 Dec 2017 (National)
  • Biomechanical Analysis of a Single Locking Compression Plate in a Bicondylar Tibial Plateau Fracture., UMMC
    01 Nov 2003 - 01 Nov 2009 (University)
  • Ex-vivo Comparative Biomechanical Analysis of Allograft, Xenograft and Cages in Lumbar Interbody Fusion., UMMC
    01 Nov 2003 - 01 Nov 2009 (University)
  • Industrial Research Collaboration Iron Oxide Pigments Production., IOP Specialist SDN. BHD.
    01 Nov 2003 - 01 Nov 2009 (International)
  • Cost Effective Hybrid External Fixator- Biomechanical Evaluation., UMMC
    01 Nov 2003 - 01 Nov 2009 (University)
  • Electrical Energy Saving., UM-Konsortium Kontraktor Melayu Pahang Berhad
    01 Nov 2006 - 01 Nov 2009 (National)
  • Materials Engineering Programme., UM-Terengganu Advanced Technical Institute (TATI)
    01 Nov 2006 - 01 Nov 2009 (National)
  • Sirim Technical Commitee On Iron and Steel Casting, SIRIM Berhad.
    01 Nov 2003 - 01 Nov 2009 (National)

PAPER PRESENTED

PLENARY SPEAKER
  1. Superplastic and Its Applications, National Conference on Engineering and Technology (NACET 2004) , University of Malaya (National) (26 May 2004 - 27 May 2004)
POSTER PRESENTER
  1. Study on Properties and Kinetics of Carburizing Superplastic Duplex Stainless Steel , International Conference on Processing and Manufacturing of Advanced Materials (THERMEC)  (International) (04 Jul 2006 - 08 Jul 2006)
PRESENTER
  1. Superplastic and the Applications , AUN/SEED Net Field Wise Seminar  (International) (25 Jun 2006 - 28 Jun 2006)
  2. Boronizing of Fine Microstructure Duplex Stainless Steel; Surface Properties and Kinetic Study , The 2nd ASEAN Science Congress and Sub Committee Conference on Material Science and Technology 2005, Jakarta  (International) (04 Aug 2005 - 04 Aug 2005)
  3. Kinetic Study on Boronized Duplex Stainless Steel , 2nd International Conference on Materials and Processing 2005, Seattle, USA  (International) (18 Jun 2005 - 18 Jun 2005)
  4. Superplastic Boronizing of Duplex Stainless Steel, 53rd Annual Meeting of Japanese Soc. Mat. Sci.  (International) (01 May 2004 - 01 May 2004)
  5. Solid state bonding of superplastic ( + ) duplex stainless steel with carbon steel and Mechanical Properties of Joint , 46th Meeting of Japanese Art and Technology Union  (International) (01 Sep 2002 - 01 Sep 2002)
  6. Superplastic diffusion bonding of duplex stainless steel , 2nd Wold Engineering Congress  (International) (02 Jul 2002 - 25 Jul 2002)
  7. Solid state bonding of superplastic ( + ) duplex stainless steel, 51th Annual Meeting of Japanese Soc. Mat. Sci. , Japanese Soc. Mat. Sci. (International) (01 May 2002 - 02 May 2002)
OTHERS
  1. Mechanical Testing , Short Course on Material Analysis, Characterization and Evaluation , University of Malaya (University) (08 Sep 2004 - 09 Sep 2004)

ACADEMIC/ PROF. SERVICES

Evaluation
  1. Fabrication and Properties of Nickel Aluminide-Alumina Intermetallic Composite (Internal Examiner) - Roslina Ismail (Mechanical Engineering Dept. Univ. of Malaya 2003).
  2. Furnace Brazing of Pure Copper with Bag -8 Braze Alloy (Internal Examiner) Agus Budi (CAD/CAM Dept. Univ. of Malaya 2005).

SUPERVISION

Postgraduate Student
PhD/ Doctoral
  1. (2012) Embedment of HA onto titanium alloys in application (in-vivo), Hidayah Mohd Khalid
  2. (2010) Superplastic carburizing on titanium alloys, Nor Wahida Ahamad
Master
  1. (2011) Study on superplastic embedment of HA on titanium alloys, Siti Aida Binti Jamlus
  2. (2011) Kinetics of carburizing of titanium alloys by superplastic compression at different strain rate, Nor Taibah binti Taazim
  3. (2011) Development of cutting tools through superplastic boronizing of DSS, Sunita Binti Harun
  4. (2010) Superplastic boronizing on DSS, Rosnaini Saidan
  5. (2010) CAP and titanium powder on titanium alloys - mechanical behaviour, Siti Nur Binti Hasan
  6. (2008) Development of implant material through embedment of hydroxyapatite (HA) on Ti6Al4V using superplastic forming method, Sanaz Yazdanparast
  7. (2008) Advanced Materials, Hidayah Mohd Khalid
  8. (2008) Advanced Materials, Adibah Haneem Mohamad Dom
  9. (2007) Surface properties and kinetics of boronized DSS, Hanis Ayuni Mohd Yusof
  10. (2006) Study on surface properties of superplastically carburized DSS, Sharidah Azuar Abdul Azis
  11. (2006) Compression method and surface properties superplastic carburizing of DSS, Nor Wahida Ahamad
  12. (2006) Boronizing of DSS by superplastic compression approach, Nur Hafizah Abdul Aziz
  13. (2004) Development of superplastic boronizing using Ti6Al4V, Yong Siu Fung
  14. (2004) A study on superplastically carburized DSS, Nik Roslin Nik Masdek
  15. (2003) Development of superplastic boronizing using duplex stainless steel, Rafidah Hasan

SOCIAL RESPONSIBILITY ACTIVITIES

  • Speech At The Homecoming Day Symposium At Ehime University, Japan., (09 Nov 2017 - 12 Nov 2017)
  • Alumni Ehime University Japan, (17 Sep 2016 - 18 Sep 2016)