Curriculum Vitae

DR. NOR ISHIDA BINTI ZAINAL ABIDIN

Senior Lecturer
  • Department of Mechanical Engineering
    Faculty of Engineering
  • ishida
  • +603-79672174

AREAS OF EXPERTISE

  • BIO-METERIAL
    Magnesium; Biomaterials; Corrosion;

ACADEMIC QUALIFICATION

  • Doctoral Degree (PhD), (Material Engineering)
    University of Queensland, Australia
  • MASTER DEGREE, (Sains Bahan dan Kejuruteraan)
    Malaysia University of Science and Technology
  • BE (HONS), (KEJURUTERAAN BAHAN)
    Universiti Malaya (UM)

ADMINISTRATIVE DUTIES

  • Coordinator
    07 Nov 2022 - 31 Dec 2024 (Department of Mechanical Engineering, Faculty of Engineering)
  • Commitee member of 'SEBUT HARGA bagi bekalan Workbench bagi Jabatan Kejurteraan Elektrik'
    02 Apr 2014 - present (Department of Mechanical Engineering, Faculty of Engineering)
  • Evaluator for appraisal Postgraduate Research Fund (PPP) recycle 1-2015 Online
    07 Aug 2015 - present (Department of Mechanical Engineering, Faculty of Engineering)
  • Panel 1 Candidature Defense of Muhammad Mehran Qadir (KGA120092)
    19 Dec 2014 - present (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee member of specification and price for vacuum chamber furnace
    13 Mar 2014 - present (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee member of 'Unit Kualiti Peringkat Jabatan Kejuruteraan Mekanik, Fakulti Kejuruteraan'
    09 Oct 2014 - present (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee member of AUN/SEED-NET REGIONAL CONFERENCE ON MATERIALS ENGINEERING 2014
    06 Aug 2014 - present (International)
  • Panel 2 of Candidature Defense of Siti Aida Binti Jamlus (KGA110074)
    30 Oct 2014 - present (Faculty)
  • M. Eng internal examiner
    09 Jun 2015 - present (Department of Mechanical Engineering, Faculty of Engineering)
  • Task Force Member
    24 Aug 2023 - 24 Jun 2024 (University Malaya)
  • Coordinator
    01 Aug 2021 - 31 Dec 2023 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Members
    23 Aug 2022 - 31 Dec 2023 (Department)
  • Committee Members
    07 Dec 2023 - 30 Dec 2023 (Department)
  • Committee Members
    02 Aug 2021 - 01 Aug 2023 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Members
    25 Feb 2022 - 31 Jul 2023 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Members
    20 May 2022 - 31 Dec 2022 (University Malaya)
  • Task Force Leader
    12 Jul 2022 - 31 Dec 2022 (University Malaya)
  • Committee Members
    01 Jul 2021 - 30 Jun 2022 (Department of Mechanical Engineering, Faculty of Engineering)
  • Final Year Project Committee Member
    16 Nov 2020 - 15 Nov 2021 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee member of academic advisory
    01 Oct 2019 - 01 Oct 2021 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee member of the quality assurance
    01 Aug 2019 - 01 Aug 2021 (Department of Mechanical Engineering, Faculty of Engineering)
  • IDP Supervisor
    01 Sep 2020 - 30 Jan 2021 (Department of Mechanical Engineering, Faculty of Engineering)
  • Final Year Project Supervisor
    01 Sep 2020 - 29 Jan 2021 (Department of Mechanical Engineering, Faculty of Engineering)
  • IDP Proposal Reviewer
    01 Sep 2020 - 29 Jan 2021 (Department of Mechanical Engineering, Faculty of Engineering)
  • PRE-EXAMINATION COMMITTEE MEMBER FOR HIGH DEGREE EXAMINATION (BY COURSE)
    16 Dec 2019 - 15 Jan 2021 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Member of Higher Degree
    16 Jan 2019 - 15 Jan 2021 (Department of Mechanical Engineering, Faculty of Engineering)
  • Quality Manager
    01 Jan 2020 - 31 Dec 2020 (Department of Mechanical Engineering, Faculty of Engineering)
  • PRE-EXAMINATION COMMITTEE FOR UNDERGRADUATE DEGREE EXAMINATION
    01 Jan 2020 - 31 Dec 2020 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Member of JPPHB Tender Evaluation Proposal for Main Sewage Pipe Near to Tan Sri Azman Hashim Building
    29 Jul 2020 - 29 Dec 2020 (University Malaya)
  • Committee member of SAR
    01 Dec 2018 - 01 Dec 2020 (Department of Mechanical Engineering, Faculty of Engineering)
  • Higher Degree Curriculum Reviewer
    02 Oct 2020 - 02 Oct 2020 (Department of Mechanical Engineering, Faculty of Engineering)
  • Faculty Supervisor for Industrial Training
    12 Aug 2020 - 17 Sep 2020 (University Malaya)
  • Committee member of academic CQI
    01 Sep 2017 - 01 Sep 2020 (Department of Mechanical Engineering, Faculty of Engineering)
  • Internal Examiner - Norhashidah
    13 Sep 2019 - 21 Aug 2020 (Department of Mechanical Engineering, Faculty of Engineering)
  • Faculty Research Grant 2020 Assessor
    17 Aug 2020 - 17 Aug 2020 (Deputy Dean (Research) Office, Faculty of Engineering)
  • Candidature Defence Chairman - Darshan Namasivayam
    03 Jun 2020 - 03 Jun 2020 (Department of Mechanical Engineering, Faculty of Engineering)
  • Candidature Defence Chairman - Mardziah Che Murad
    06 Mar 2020 - 06 Mar 2020 (Department of Mechanical Engineering, Faculty of Engineering)
  • Candidature Defence Panel - Mohamed Kamaleldin Gaffar Abbas
    28 Jan 2020 - 28 Jan 2020 (Department of Mechanical Engineering, Faculty of Engineering)
  • Fast Track Interview Panel - NG WEI HUAT
    17 Jan 2020 - 17 Jan 2020 (Department of Mechanical Engineering, Faculty of Engineering)
  • Fast Track Interview Panel - PUTRI HUMAIRAH MONASHOFIAN PUTRA
    17 Jan 2020 - 17 Jan 2020 (Department of Mechanical Engineering, Faculty of Engineering)
  • Faculty lead auditor for PT01
    14 Nov 2019 - 14 Jan 2020 (Department of Mechanical Engineering, Faculty of Engineering)
  • Candidature Defense Chairman - Siti Mariah
    10 Dec 2019 - 10 Dec 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • Fast Track Panel - Ng Wei Huat
    09 Dec 2019 - 09 Dec 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • Fast Track Panel - Gan Zhi Lon
    09 Dec 2019 - 09 Dec 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • Member of the Tender Evaluation Committee - Bangunan Madinatul, Kelantan
    18 Nov 2019 - 18 Nov 2019 (University Malaya)
  • Fast Track Panel - Siow Pei Yi
    11 Nov 2019 - 11 Nov 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • Candidature Defense Chairman - Nur Areisman
    07 Nov 2019 - 07 Nov 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • Lead Internal UM Auditor - PT01
    01 Jul 2019 - 31 Jul 2019 (University Malaya)
  • Internal auditor UM - March 2019
    01 Mar 2019 - 31 Jul 2019 (University Malaya)
  • Member of the Tender Evaluation Committee - Kompleks Bangunan LAKIM, Petaling Jaya
    12 Jul 2019 - 12 Jul 2019 (University Malaya)
  • Candidature Defense Chairman - Tan Chin Joo
    27 Jun 2019 - 27 Jun 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • Candidature Defense Panel - Gan Yong Yang
    19 Jun 2019 - 19 Jun 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • Fast Track Panel - Ng Di Feng
    12 Mar 2019 - 12 Mar 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee member of Higher Degree
    01 Mar 2018 - 01 Mar 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • Confirmation Defense Chairman - Lee Ee Lynn
    27 Feb 2019 - 27 Feb 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • Confirmation Defense Chairman - Goh Yi Sing
    27 Feb 2019 - 27 Feb 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee member of Quality
    26 Feb 2018 - 25 Feb 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • Candidature Defense Panel - Tawfik Hamood Qaid
    20 Feb 2019 - 20 Feb 2019 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee member of Jawatankuasa Pemeriksa Fakulti Kejuruteraan Ijazah Sarjana Muda dan Ijazah Sarjana
    01 Jan 2016 - 31 Dec 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Student advisor
    01 Nov 2016 - 31 Dec 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Internal Examiner For Research Project - Suguna A/P Jeganathan (KQG160009)
    17 Dec 2018 - 17 Dec 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Internal Examiner For Research Project - Subashiny A/P Prabakaran (KQJ170009)
    17 Dec 2018 - 17 Dec 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Internal Examiner For Research Project - Angel Anak Richard (KQJ170005)
    17 Dec 2018 - 17 Dec 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Internal Examiner For Research Project - Abu Hanifah Bin Muhamad Ali (KQJ170004)
    17 Dec 2018 - 17 Dec 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Internal Examiner For research Project - Shalini Devi Ramaiya (KQJ170010)
    17 Dec 2018 - 17 Dec 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Internal Examiner For Research Project - Christopher Tseu Zia Chyuan (KQK160026)
    17 Dec 2018 - 17 Dec 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Board of Examiner meeting HOD representative for ALIREZA YAGHOUBI TAEMEH (KGA160040)
    06 Dec 2018 - 06 Dec 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • CANDIDATURE DEFENSE PANEL 1 FOR DOCTOR OF PHILOSOPHY - RODIANAH ALIAS (KHA150012)
    28 Nov 2018 - 28 Nov 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • CANDIDATURE DEFENSE CHAIRMAN FOR MASTER OF ENGINEERING SCIENCE - TUERXUN DUOLIKUN (KGA160036)
    23 Nov 2018 - 23 Nov 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • CANDIDATURE DEFENSE CHAIRMAN FOR MASTER OF ENGINEERING SCIENCE - SIAH MENG ZHE (KGA170002)
    21 Nov 2018 - 21 Nov 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Interview Panel For Fast Track Candidate - CHAN YON SIN
    01 Nov 2018 - 01 Nov 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Interview Panel For Fast Track - Chan Yon Sin
    19 Oct 2018 - 19 Oct 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Interview Panel For Fast Track - YIT JING EE
    19 Oct 2018 - 19 Oct 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Interview Panel For Fast Track - SU XIAN LONG
    19 Oct 2018 - 19 Oct 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • CANDIDATURE DEFENSE PANEL 2 FOR DOCTOR OF PHILOSOPHY - MARJAN SAFARZADEH (KHA160014)
    15 Aug 2018 - 15 Aug 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • CANDIDATURE DEFENSE CHAIRMAN FOR MASTER OF ENGINEERING SCIENCE - CHIA SHIR REEN (KGA 160038)
    15 Aug 2018 - 15 Aug 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Lead Auditor for UM Internal Audit 2018
    02 Jul 2018 - 25 Jul 2018 (University Malaya)
  • Committee member of Pelaksana Makmal
    08 Jan 2018 - 30 Jun 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Member of Lab Committee
    02 Feb 2018 - 15 Jun 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Master of Engineering Science Internal Examiner - Nur Aqilah Binti Derahman (KGA 150065)
    04 Apr 2018 - 02 Jun 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • CANDIDATURE DEFENSE CHAIRMAN FOR DOCTOR OF PHILOSOPHY - THENNAKOON MUDIYANSELAGE SAMPATH UDENI GUNATHILAKE (KHA 150058)
    27 Apr 2018 - 27 Apr 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Board of Examiner meeting HOD representative for NUR SUHAILA BINTI ROSLI (KGA130086)
    21 Mar 2018 - 21 Mar 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Board of Examiner meeting HOD representative for NURUL LIYANA BT. KAMARUZAMAN (KGA130087)
    21 Mar 2018 - 21 Mar 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • CANDIDATURE DEFENSE PANEL 2 FOR DOCTOR OF PHILOSOPHY - Ethar Yahya Salih (KHA 140116)
    16 Mar 2018 - 16 Mar 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • CANDIDATURE DEFENSE PANEL 1 FOR MASTER OF ENGINEERING SCIENCE - UMI ZALILAH MOHAMAD ZAIDI (KGA 150067)
    08 Mar 2018 - 08 Mar 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee member of Write Up and Document Compilation of Self-Assessment Report
    26 Sep 2017 - 31 Jan 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee member of 'Pelaksana Makmal'
    05 Sep 2016 - 02 Jan 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee member of ICoSEM 2017
    01 Nov 2016 - 30 Nov 2017 (International)
  • Panel Assessment for Fast Track PhD Ooi Xian Yih
    03 Nov 2017 - 03 Nov 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee member (substitute representative) of JIT
    07 Mar 2014 - 19 Sep 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Panel Assessment for Fast Track PhD Goh Yi Sing
    15 Sep 2017 - 15 Sep 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Panel Assessment for Fast Track PhD Lee Ee Lynn
    15 Sep 2017 - 15 Sep 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Panel Assessment for Fast Track PhD Sivadas A/L Chanda Sekaran
    24 Aug 2017 - 24 Aug 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Panel Assessment for Fast Track PhD Gan Yong Yang
    24 Aug 2017 - 24 Aug 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Head of Department representative for viva-voce session Norjannah Binti Basan (KGA 140066)
    23 Aug 2017 - 23 Aug 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Evaluation panel for 'Persidangan Kebangsaan Staf Kumpulan Professional/Pelaksana Universiti-universiti dalam Kejuruteraan 2017'
    02 Aug 2017 - 02 Aug 2017 (Faculty)
  • Candidature defence panel Mohd Zakuan Bin Zabri (KGA 150061)
    12 Apr 2017 - 12 Apr 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Head of Department representative for viva-voce session Nor Aliya Binti Hamizi (KHA 110069)
    24 Apr 2017 - 24 Mar 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Candidature defence panel Nur Arfareeza Binti Ahmad
    16 Feb 2017 - 16 Feb 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Faculty representative to Majlis Perutusan Tahun Baharu 2017
    20 Jan 2017 - 20 Jan 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Head of Department representative for viva-voce session Goh Kian Heng (KHA 130084)
    13 Jan 2017 - 13 Jan 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committe member of AMPT 2016
    01 Jan 2016 - 31 Dec 2016 (International)
  • Head chapter for self-assessment report (materials engineering)
    15 Jan 2016 - 30 Nov 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Candidature defence panel Goh Kian Wei (KGA 150038)
    10 Oct 2016 - 26 Oct 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Candidature defence panel Tan Chin Joo (KHA 150041)
    28 Sep 2016 - 28 Sep 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Candidature defence panel for Shariful Islam (KGA 140017)
    07 Jun 2016 - 07 Jun 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Candidature defence panel Aainaa Aqilah Binti Baharuddin (KGA150011 )
    30 May 2016 - 30 May 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Candidature defence panel Md Arafat Hossain (KGA 140026)
    16 Feb 2016 - 02 Feb 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Candidature defence panel Fayeka Mansura (KGA 130016)
    17 Dec 2015 - 17 Dec 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Candidature defence panel Nurul Suhaila Binti Rosli (KGA 130086)
    25 Nov 2015 - 25 Nov 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Candidature defence panel Nurul Liyana Binti Kamaruzaman (KGA 130086)
    25 Nov 2015 - 25 Nov 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee member of ICoSem 2015
    26 Feb 2015 - 19 Nov 2015 (International)
  • Candidature defence panel Natasha Binti Ahmad Nawawi (KHA 120063)
    07 Sep 2015 - 07 Sep 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee member of 'SEMAKAN KURIKULUM DAN PENAMBAHBAIKAN PROGRAM IJAZAH SARJANA KEJURUTERAAN (BAHAN & TEKNOLOGI)
    10 Nov 2014 - 02 Sep 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee member of Observation Students
    01 Aug 2014 - 03 Aug 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Candidature defence panel Ummu Habiba (KGA 130030)
    04 Jun 2015 - 04 Jun 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Chairman/Assessor For Research Methodology Presentation
    27 Dec 2014 - 28 Dec 2014 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee of ICoSEM 2013
    02 Jan 2013 - 13 Nov 2014 (University Malaya)
  • Candidature defence panel Nurul Azri Khalisah Binti Aznan (KGA100075)
    03 Nov 2014 - 03 Nov 2014 (Department of Mechanical Engineering, Faculty of Engineering)
  • Candidature Defence Panel Mehdi Mehrali (KGA 110042)
    29 Aug 2014 - 29 Aug 2014 (Department of Mechanical Engineering, Faculty of Engineering)

MEMBERSHIPS

  • BOARD OF ENGINEERS MALAYSIA, GRADUATE MEMBER
    Since 2013 (National)
  • INSTITUTE OF MATERIALS MALAYSIA, MEMBER
    Since 2013 (National)

AWARD AND STEWARDSHIP

  • Category: New & Sustainable Energy Generation, Conversion and Management (Special Awards Winners -Public University)
    Malaysia Technology Expo, 2023 (International)
  • Category: New & Sustainable Energy Generation, Conversion and Management (Outstanding Awards Winner)
    Malaysia Technology Expo, 2023 (International)
  • Category: New & Sustainable Energy Generation , Conversion and Management
    Malaysia Technology Expo, 2023 (International)
  • Faculty of Engineering Grant Assessor
    Faculty of Engineering, Universiti Malaya, 2020 (Ptj/ Faculty)
  • National Standard Committee on Metallic Materials and Semi-Finished Products (NSC P)
    Standards Malaysia, 2020 (Government)
  • IMM Working Committee Members of the Standard Assurance Committee of IMM
    Institute of Materials Malaysia, 2020 (Private)
  • Auditor Course ISO 17024
    Institute of Materials Malaysia, 2019 (National)
  • Judge in Beyond Engineering Innovation (BEGIN) Challenge 2019
    University Malaya, 2019 (National)
  • Team Mentor in Beyond Engineering Innovation (BEGIN) Challenge 2018
    University of Malaya, 2018 (National)
  • Judge in Beyond Engineering Innovation (BEGIN) Challenge
    University of Malaya, 2018 (National)
  • Lead Auditor Course ISO 9001:2015 Exemplar Global Certified
    Exemplar Global Certifies Training Provider / SIRIM, 2018 (International)
  • SIRIM Metallic Materials and Semi-Finished Products Standard
    SIRIM, 2018 (National)
  • Best Invention Award
    28th International Invention, Innovation and Technology Exhibition (ITEX 2017) , 2017 (International)

PUBLICATIONS

Article in Journal
WoS
  1. Low, Y. J.; Andriyana, A.; Ang, B. C.; Abidin, N. I. Zainal (2023). Effect of gauge length on the mechanical responses and crystallization behavior of poly(glycolide-co-caprolactone) (PGCL) suture, MECHANICS OF TIME-DEPENDENT MATERIALS. . doi:10.1007/s11043-023-09596-x
  2. Low, Y. J.; Kittur, M. I.; Andriyana, A.; Ang, B. C.; Abidin, N. I. Zainal (2023). A novel approach to evaluate the mechanical responses of elastin-like bioresorbable poly(glycolide-co-caprolactone) (PGCL) suture, JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS. 140. doi:10.1016/j.jmbbm.2023.105723
  3. Wong, Y. H., Lei, Z. C., & Abidin, N. I. Z. (2021). Surface and interface characteristics of annealed ZrO2/Ge oxide-semiconductor structure in argon ambient. Surfaces and Interfaces, 23, 7. doi: 10.1016/j.surfin.2021.101007
  4. Low, Y. J., Andriyana, A., Ang, B. C., & Abidin, N. I. Z. (2020). Bioresorbable and degradable behaviors ofPGA: Current state and future prospects. Polymer Engineering and Science, 60(11), 2657-2675. doi: 10.1002/pen.25508
  5. Sadri, R., Hosseini, M., Kazi, S. N., Bagheri, S., Abdelrazek, A. H., Ahmadi, G., . . . Abidin, N. I. Z. (2018). A facile, bio-based, novel approach for synthesis of covalently functionalized graphene nanoplatelet nano-coolants toward improved thermo-physical and heat transfer properties. Journal of Colloid and Interface Science, 509, 140-152. doi:10.1016/j.jcis.2017.07.052
  6. Sopyan, I.; Pusparini, E.; Ramesh, S.; Tan, C. Y.; Ching, Y. C.; Wong, Y. H.; Abidin, N. I. Zainal; Chandran, Hari; Ramesh, S.; Bang, L. T. (2017). Influence of sodium on the properties of sol-gel derived hydroxyapatite powder and porous scaffolds, CERAMICS INTERNATIONAL. 43(15), 12263-12269. doi:10.1016/j.ceramint.2017.06.088
  7. Abidin, N. I. Z., Da Forno, A., Bestetti, M., Martin, D., Beer, A., Atrens, A. (2015). Evaluation of Coatings for Mg Alloys for Biomedical Applications, Advanced Engineering Materials. 17(1), 58-67
  8. Abidin, N. I. Z., Rolfe, B., Owen, H., Malisano, J., Martin, D., Hofstetter, J., Uggowitzer, P. J., Atrens, A. (2013). The in vivo and in vitro corrosion of high-purity magnesium and magnesium alloys WZ21 and AZ91, Corrosion Science. 75, 354-366
  9. Qiao, Z. X., Shi, Z. M., Hort, N., Abidin, N. I. Z., Atrens, A. (2012). Corrosion behaviour of a nominally high purity Mg ingot produced by permanent mould direct chill casting, Corrosion Science. 61, 185-207
  10. Abidin, N. I. Z., Atrens, A. D., Martin, D., Atrens, A. (2011). Corrosion of high purity Mg, Mg2Zn0.2Mn, ZE41 and AZ91 in Hanks solution at 37 degrees C, Corrosion Science. 5311(3542-3556), Article
  11. Abidin, N. I. Z., Martin, D., Atrens, A. (2011). Corrosion of high purity Mg, AZ91, ZE41 and Mg2Zn0.2Mn in Hanks solution at room temperature, Corrosion Science. 533(862-872), Article
Others
  1. Atikah Wan Nafi, Amalina Afifi, Nor Ishida Zainal Abidin, Noor Hidayah Abdul Aziz & Katayoon Kalantari. (2018). Effect of the Poly L-lactic Acid Coating on the Corrosion of Magnesium in Hank's Solution, Sains Malaysiana, Volume 47, no. 1
  2. Z.C. Lei, N.I. Zainal Abidin, Y.H. Wong. 2018. Structural, chemical, and electrical properties of ZrO2/Ge system formed via oxidation/nitridation in N2O gas ambient. Journal of Materials Science: Materials in Electronics. 29, 12888-12898.
  3. A.H. Nur Nadia, S. Ramesh, C.Y. Tan, Y.H. Wong, N.I. Zainal Abidin, W.D. Teng, U. Sutharsini, Ahmed A.D. Sarhan. 2017. The effects of sintering additives on the mechanical properties and microstructure evolution of 3 mol% Y-TZP. Journal of Ceramic Processing Research, 18(7), 483-487.
  4. Z.C. Lei, K.H. Goh, N.I. Zainal Abidin, Y.H. Wong. 2017. Effect of Oxidation Temperature on Physical and Electrical Properties of ZrO2 Thin-Film Gate Oxide on Ge Substrate. Thin Solid Films. 642, 352-358.
  5. Charde, N., Ahmad, R. & Abidin, N.I.Z.(2016).Interpreting the weld formations using acoustic emission for the carbon steels and stainless steels welds in servo-based resistance spot welding. The International Journal of Advanced Manufacturing Technology,86 (1),1-8
  6. Atrens, A., Liu, M. & Zainal Abidin, N. I.Corrosion Mechanism applicable to biodegradable magnesium implants. Materials Science and Engineering: B 176 (20) 15 : 1609-1636
  7. Zainal Abidin, N. I., Atrens, A. D., Martin, D. & Atrens, A. 2011. Corrosion of high purity Mg, Mg2Zn0.2Mn, ZE41 and AZ91 in Hank's solution at 37 C. Corrosion Science 53 (11) : 3542-3556.
  8. Zainal Abidin, N. I., Martin, D. & Atrens, A. 2011. Corrosion of high purity Mg, AZ91, ZE41 and Mg2Zn0.2Mn in Hank's solution at room temperature. Corrosion Science 53 (3) : 862-872
  9. Zainal Abidin,N. I, Martin, D. & Atrens, A. Magnesium corrosion in different solutions. 2011. Materials Science Forum 690 : 369-372.
Chapter in Books
  1. Atrens, A., Liu, M., Zainal Abidin, N. I. Song, G. -L. 2011 Corrosion of magnesium (Mg) alloys and metallurgical influence in Song, G. -L. Corrosion of Mg alloys, pg. 117-161. Canada : Woodhead Publishing

RESEARCH PROJECT

National
  1. 2020 - 2024, Fundamental Research Grant Scheme (FRGS)
    Tribocorrosion Characterization Of Self-lubricated Nanoporous Coating On Ultrafine Grained Aluminium Alloy ( Principal Investigator(PI))
  2. 2019 - 2023, Fundamental Research Grant Scheme (FRGS)
    Controlling Corrosion Rate Of Biodiesel Fueled Engines Via Cyclic Regeneration Of Weak Base Within Diesel Engine Oil ( Co-Researcher)
  3. 2020 - 2023, Fundamental Research Grant Scheme (FRGS)
    Exploring The Potential Of Surface Modification Of Zn/zn Alloys By Nanostructure Growth And Its Degradation Mechanism ( Co-Researcher)

PAPER PRESENTED

INVITED SPEAKER
  1. Mg and Its Alloys for Medical Applications , Australia-China Symposium on Medical Device Manufacturing (19 Oct 2011 - 21 Oct 2011)
ORAL PRESENTER
  1. Mangnesium Corrosion in Different Solutions, 5th International Light Metal Technology Conference (18 Jul 2011 - 22 Jul 2011)
  2. Mangnesium and Its Alloys for Medical Applications, Postgraduate Student Conference (16 Sep 2010 - 16 Sep 2010)
  3. Mg and Its Alloy for Medical Applications, CAST Conference (16 Aug 2010 - 20 Aug 2010)
OTHERS
  1. Corrosion Behaviors of Mg based composite reinforced with GNPs in 3 % Sodium Chlorite (NaCI) solution , International Corrosion Prevention Symposium for Research Scholar (CORSYM 2017), NACE International (International) (03 May 2017 - 04 May 2017)
  2. Effect of Zn addition on the mechanical properties and corrosion behavior of Mg-10Ti-1GNPs , International Corrosion Prevention Symposium for Research Scholar (CORSYM 2017), NACE International (International) (03 May 2017 - 04 May 2017)
  3. Corrosion resistance of magnesium-niobium-zinc (Mg-Nb-Zn) composites for biomedical applications, International Corrosion Prevention Symposium for Research Scholar (CORSYM 2017), NACE International (International) (03 May 2017 - 04 May 2017)

ACADEMIC/PROF. SERVICES

Evaluation
  1. (2023) Panel for Phd Fast Track Interview - James Tok Shun Sean, University, (Internal Assessor)
  2. (2023) Nur Naqiuddin Bin Md Nordin (S2151766/1) - Effect of Glass Fiber Reinforcement Polymer On The Corrosion Mitigation and Mechanical Reinforcement of Carbon Steel in Biodiesel Storage (Panel 1), University, (Internal Examiner)
  3. (2023) Lee Yu Shi (S2183751/1) - Calon Ijazah Sarjana Falsafah, Institut Pengajian Termaju, University, (Internal Examiner)
  4. (2023) Shahab Imran (S2104805/1) - Controlling The Rate of Corrosion of Biodiesel Fueled Engines Via Cyclic Regeneration of Weak Base Within Diesel Engine Oil (Panel 2), University, (Internal Examiner)
  5. (2023) Pogganeswaran Gurusingam (S2180431/1) - Thick Palladium Coated Copper Wire Free Air Ball (Fab) Grain Size Effect On The Aluminium Bond Pad in Copper Wire Bond Process (Panel 1), University, (Internal Examiner)
  6. (2023) Qiang Zhang (S2173572/1) - Solar Furnace for Biochar Production, University, (Internal Examiner)
  7. (2023) Mohmmad Ashraf Ariffin (S2039234/1) - Friction Stir Alloying of Magnesium Alloy and Mild Steel With Cu-Cnt Additive, University, (Internal Examiner)
  8. (2023) Coordinator for Phd Thesis Seminar Presentation, University, (Internal Assessor)
  9. (2023) Committee of Quality Assurance of Faculty Engineering, University, (Internal Assessor)
  10. (2022) Nursyahirah Mohd Shatar (S2101051/1) - Chairman, University, (Internal Examiner)
  11. (2022) Thesis Seminar Presentation - Amir Reza Akhiani (Kha150077, 17050472/1) - Chairman/Panel, University, (Internal Examiner)
  12. (2022) Bo Wu (S2016986/1) - Panel 1, University, (Internal Examiner)
  13. (2022) Thesis Seminar Presentation - Subhrojyoti Mazumder (Kva190012, 17201423/1) - Chairman/Panel, University, (Internal Examiner)
  14. (2022) Pelantikan Pemeriksa Dalam Laporan Penyelidikan Semester 2, Sesi 2021/2022 - Norshamira Binti Mazlan ( S2033251/1), University, (Internal Examiner)
  15. (2022) Pelantikan Pemeriksa Dalam Laporan Penyelidikan Semester 2, Sesi 2021/2022 -Norshamira Binti Mazlan (S2033251/1), University, (Internal Examiner)
  16. (2022) Thesis Seminar Presentation - Aainaa Aqilah Binti Baharuddin (Kva180067, 17013270/2) - Chairman/Panel, University, (Internal Examiner)
  17. (2022) Thesis Seminar Presentation - Mohammed Ibrahim Kittur (Kva180057, 17198294/1 - Chairman/Panel, University, (Internal Examiner)
  18. (2022) Nadiah Bt Ghazali (Kha150002, 17042370/2) - Panel 2, University, (Internal Examiner)
  19. (2022) Advisory Panel for Faculty Subjects, University, (Internal Assessor)
  20. (2022) Phd Student Co-Supervision, National, (External Assessor)
  21. (2021) Cd Panel 1 : Amir Reza Akhiani, University, (Internal Examiner)
  22. (2021) Panel of Judges for Cam Postgraduate Symposium 2021, University, (Internal Evaluator)
  23. (2021) Fyp Ii Moderation Grade I, 2020/2021, University, (Internal Examiner)
  24. (2021) Internal Examiner: Saif Wakeel, University, (Internal Examiner)
  25. (2021) Fyp Moderator Semester 1, 2020/2021, University, (Internal Examiner)
  26. (2021) Idp Moderator Sem 1, 2020/2021, University, (Internal Examiner)
  27. (2021) Committee of Curriculum Review for Materials Subject, University, (Reviewer)
  28. (2021) Fyp Committee of Mechanical Engineering, University, (Internal Evaluator)
  29. (2021) Eac Committee for Mechanical Engineering, University, (Internal Assessor)
  30. (2021) Idp Supervisor Semester 1 & 2, 2020/2021, University, (Internal Examiner)
  31. (2021) Department Representative in Higher Degree, University, (Reviewer)
  32. (2020) Malaysian Journal of Analytical Sciences (MJAS) Title: Corrosion Behaviour and Materials Degradation of Low-Carbon Steel and Stainless Steel 304 Under Two Soil Conditions at Pantai Mengabang Telipot, Terengganu, Malaysia , (Reviewer)
  33. (2019) APPOINTMENT AS REVIEWER FOR 4th Advanced Materials Conference 2018 (AMC2018), (Reviewer)
  34. (2019) Student: NORHASHIDAH BINTI TALIP (KGA140049) , (Internal Examiner)
  35. (2019) APPOINTMENT AS REVIEWER FOR ICoSEM 2019, (Reviewer)
  36. (2017) Student: Aisswarya A/P Kumaran (KGL 140020) , (Internal Examiner)
  37. (2017) Student: Cynthia Shantini Cherles (KMEB 150001) , (Internal Examiner)
  38. (2017) ICoSEM 2017, (Reviewer)
  39. (2017) Student: Goh Kian Wei (KGA 150038), (Internal Examiner)
  40. (2017) Student: Jeffrey Chin Kong Leng (KHA 110097), (Internal Examiner)
  41. (2017) Journal of Physical Science Title: Microstructural Investigation of Corrosion Behaviour of Plated and Non-Plated Steel Pipes in the Niger Delta Environment, (Reviewer)
  42. (2016) Review papers presented in the International Conference on Advances in Materials and Processing Technologies, AMPT 2016, (Reviewer)
  43. (2016) Internal examiner for Nurul Azri Khalisah Binti Aznan (KGA100075) Thesis title: Synthesis and Characterization of Silver Nanowires vis polyol process, (Internal Examiner)
  44. (2016) Student: Saranakkumar A/L Marippan (KGY 140002), (Internal Examiner)
  45. (2016) Conducting internal audit prior to SIRIM or others organization audit , (UM Internal Auditor)
  46. (2016) Student: Jannatun Adzura Binti Adnan (KHZ 140009), (Internal Examiner)
  47. (2015) Student: Justin Gerard A/L K. Gerard (KMB 1300010), (Internal Examiner)
  48. (2015) Student: Christopher Chin Kong Ming (KHA 100124), (Internal Examiner)
  49. (2014) Internal reviewer for Mr. Mohd Rafiuddin Jakeria (KGA120069)title Compositional Instability of Palm Biodiesel Upon Exposure to Automotive Materials and Remedial Measures , (Internal Examiner)
  50. (2014) Candidate SlTl AIDA BT JAMLUS (KGA110074), dissertation title MECHANICAL AND BIOLOGICAL STABILITY OF SUPERLASTICALLY EMBEDDED HA NANOLAYER DEFORMED AT HIGH TEMPERATURE, (Internal Examiner)
  51. (2013) ICoSEM 2013, (Reviewer)
Contribution to external organisation
  1. (2024) Imm Committee Member of Standard Assurance Committee for The 2022 - 2024 Council Session, National, (Expert Advisor)
  2. (2022) Appointment as Internal Auditor for Ms Iso/Iec 17024 Audit (2022), National, (Auditor)
  3. (2022) National Standard Committee On Metallic Materials Andsemi Finished Products, National, (Technical Advisor)
  4. (2022) Committee Member of Standards Assurance Committee, National, (Expert Advisor)
  5. (2021) Speaker for The Imm Internal Audit Refresher Course On Ms Iso/Iec 17024:2012, National, (Expert Advisor)
  6. (2021) Internal Auditor for Imm, National, (Auditor)
  7. (2021) National Standard Committee On Metallic Material and Semi-Finished Products (Nsc P), National, (Technical Advisor)
  8. (2020) Universiti Malaya Lead Internal Auditor 2020, Universiti Malaya
  9. (2020) Higher Degree Curriculum Review Panel, Engineering Faculty, Universiti Malaya
  10. (2020) IMM Committee Member of Standards Assurance Committee, Institute of Materials Malaysia (IMM)
  11. (2020) Engineering Faculty Grant Assessor, Universiti Malaya
  12. (2020) JPPHB Tender Evaluation for evaluation work of the main sewerage pipe replacement, Universiti Malaya
  13. (2019) PhD supervision with Dr. Susan Maria Sipaun, Nuklear Malaysia, National
  14. (2019) UM Internal Auditor 2019 (March), UM
  15. (2019) UM Lead Internal Auditor PT01 (July), UM
  16. (2019) Advisor of Developing New Materials, Pasific Advances Composites Sdn. Bhd.
  17. (2019) National Standard of Metallic Materials and Semi-Finished Products (NSC P), National Standard
  18. (2018) Internal Audit UM, UM
  19. (2018) Consulting ECAP (IMM) Audit in achieving ISO Standards, Institute of Materials Malaysia
  20. (2018) IMM working committee member of the ISO Working Group under ECAP, Institute of Materials Malaysia (IMM)
  21. (2018) Consulting ECAP (IMM) Audit in achieving ISO Standards, Institute of Materials
  22. (2018) The International Conference on the Science and Engineering of Materials (ICoSEM) 2019, University of Malaya
  23. (2017) The International Conference on Sustainable Energy and Green Technology 2018 (SEGT 2018), Center of Inter-Integration
  24. (2017) Advisor on corrosion testing and study , KLAY EnerSol
  25. (2017) Advisor to initiate research and development (R&D), MISC Berhad
  26. (2017) Research and Development of Corrosion in Oil and Gas, MISC
  27. (2015) PhD supervision with Dr. Jaafar Abdullah , Malaysia Nuclear Agency, University
  28. (2014) Industrial Standard of Metallic Materials and Semi Finished products (ISC P) SIRIM, SIRIM
Contribution to event
  1. (2023) Secretary of 5th International Conference On The Science and Engineering of Materials 2023 (Icosem 2023), International, (Event Organiser)
  2. (2022) Deputy Secretary of 7th International Conference of Electrospinning 2022 Conference, International, (Event Organiser)
  3. (2022) Pelantikan Sebagai Jawatankuasa Seminar "Successful Application of Japan Sponsored Grant: Tips and Challenges' (Hybrid), University, (Event Coordinator)
  4. (2022) Committee of Electrospinning 2022 Conference, International, (Event Organiser)

SUPERVISION

Postgraduate Student
PhD/ Doctoral
  1. (2024) Exploring the corrosion properties of Nilavembu (andrographis paniculata) leaves extract as an additive for the corrosion protection of austenitic stainless steel 304 and Carbon steel A516/ Gr 70 material in seawater splash zone., LINGESHWARAN RAMACHANDRAN
  2. (2024) MULTIPLE MODALITIES OF NUCLEAR TECHNIQUES TO STUDY CORROSION AND IMAGING OF CORROSION UNDER INSULATION (CUI) IN INDUSTRIAL PLANT, MOHD KHOUSHAINI BIN MOHD NAIM
  3. (2023) INLET TEMPERATURE EFFECT ON CRYOGENIC GRINDING SYSTEM (CGS) FOR TURMERIC, SARAVANAKKUMAR A/L MARIAPPAN
  4. (2023) Mechanical Response of Bioresorbable Poly(Glycolide-Co-Caprolactone) Suture under Monotonic and Non-Monotonic Loadings, LOW YAN JIE
  5. (2020) TESTING AND MODELING OF DEGRADATION IN BIORESORBABLE POLYMERS, LOW YAN JIE
  6. (2020) MULTIPLE MODALITIES OF NUCLEAR TECHNIQUES TO STUDY CORROSION AND IMAGING OF CORROSION UNDER INSULATION (CUI) IN INDUSTRIAL PLANT, MOHD KHOUSHAINI BIN MOHD NAIM
  7. (2020) INLET TEMPERATURE EFFECT ON CRYOGENIC GRINDING SYSTEM (CGS) FOR TURMERIC, SARAVANAKKUMAR A/L MARIAPPAN
  8. (2019) TESTING AND MODELING OF DEGRADATION IN BIORESORBABLE POLYMERS, LOW YAN JIE
  9. (2019) MULTIPLE MODALITIES OF NUCLEAR TECHNIQUES TO STUDY CORROSION AND IMAGING OF CORROSION UNDER INSULATION (CUI) IN INDUSTRIAL PLANT, MOHD KHOUSHAINI BIN MOHD NAIM
  10. (2019) INLET TEMPERATURE EFFECT ON CRYOGENIC GRINDING SYSTEM (CGS) FOR TURMERIC, SARAVANAKKUMAR A/L MARIAPPAN
  11. (2018) INLET TEMPERATURE EFFECT ON CRYOGENIC GRINDING SYSTEM (CGS) FOR TURMERIC, SARAVANAKKUMAR A/L MARIAPPAN
  12. (2018) FORMATION OF ZRO2 GATE ON GE BASED METAL-OXIDE-SEMICONDUCTOR (MOS) STRUCTURE FOR ULTRA-LOW-POWER AND HIGH-SPEED-SWITCHING DEVICE APPLICATONS, LEI ZHEN CE
  13. (2018) FORMATION OF ZrO2 GATE DIELECTRIC ON Ge SUBSTRATE BY THERMAL OXIDATION AND POST ANNEALING FOR METAL-OXIDE-SEMICONDUCTOR DEVICES, LEI ZHEN CE
  14. (2018) FORMATION OF ZrO2 GATE DIELECTRIC ON Ge SUBSTRATE BY THERMAL OXIDATION AND POST ANNEALING FOR METAL-OXIDE-SEMICONDUCTOR DEVICES, LEI ZHEN CE
  15. (2017) MULTIPLE MODALITIES OF NUCLEAR TECHNIQUES TO STUDY CORROSION AND IMAGING OF CORROSION UNDER INSULATION (CUI) IN INDUSTRIAL PLANT, MOHD KHOUSHAINI BIN MOHD NAIM
  16. (2017) FORMATION OF ZRO2 GATE ON GE BASED METAL-OXIDE-SEMICONDUCTOR (MOS) STRUCTURE FOR ULTRA-LOW-POWER AND HIGH-SPEED-SWITCHING DEVICE APPLICATONS, LEI ZHEN CE
  17. (2016) INLET TEMPERATURE EFFECT ON CRYOGENIC GRINDING SYSTEM (CGS) FOR TURMERIC, SARAVANAKKUMAR A/L MARIAPPAN
  18. (2014) MULTIPLE MODALITIES OF NUCLEAR TECHNIQUES TO STUDY CORROSION AND IMAGING OF CORROSION UNDER INSULATION (CUI) IN INDUSTRIAL PLANT, MOHD KHOUSHAINI BIN MOHD NAIM
Master
  1. (2022) CORROSION BEHAVIOUR OF MAGNESIUM ALLOYS IN HANK'S SOLUTION WITH PROTEIN ADDITION, NOORHIDAYAH BINTI ABDUL AZIZ
  2. (2020) MAGNESIUM AND ITS ALLOY FOR MEDICAL APPLICATIONS, NOORHIDAYAH BINTI ABDUL AZIZ
  3. (2019) CORROSION RESISTANCE AND BIOCOMPATIBILITY OF MAGNESIUM - NIOBIUM ALLOY COATED WITH POLYCAPROLACTONE (PCL) AT DIFFERENT COATING THICKNESS, NUR FATIHAH SAADIQIN BINTI AHMAD ZAUTI
  4. (2018) STRENGTHENING MECHANISM AND CORROSION STUDY OF MAGNESIUM BASED ALLOYS COMPOSITE WITH ADDITION OF GRAPHENE NANOPLATELETS (GNPS) REINFORCEMENT, NUR ATIQAH BINTI NASIR
  5. (2018) MAGNESIUM AND ITS ALLOY FOR MEDICAL APPLICATIONS, NOORHIDAYAH BINTI ABDUL AZIZ
  6. (2018) Fabrication and Characterization of Magnesium Alloy Reinforce with Ghraphene Nanoplatelets (Mg0.2Mn/GNPs) for Medical Implants, NUR ANIS MAT NOOR
  7. (2018) CORROSION RESISTANCE AND BIOCOMPATIBILITY OF MAGNESIUM - NIOBIUM ALLOY COATED WITH POLYCAPROLACTONE (PCL) AT DIFFERENT COATING THICKNESS, NUR FATIHAH SAADIQIN BINTI AHMAD ZAUTI
  8. (2017) STRENGTHENING MECHANISM AND CORROSION STUDY OF MAGNESIUM BASED ALLOYS COMPOSITE WITH ADDITION OF GRAPHENE NANOPLATELETS (GNPS) REINFORCEMENT, NUR ATIQAH BINTI NASIR
  9. (2016) MAGNESIUM COATING BY ELECTROSPINNING OF POLY-L-LACTIC ACID, WAN NUR ATIKAH BINTI HAJI WAN NAFI
  10. (2016) CORROSION RESISTANCE AND BIOCOMPATIBILITY OF MAGNESIUM - NIOBIUM ALLOY COATED WITH POLYCAPROLACTONE (PCL) AT DIFFERENT COATING THICKNESS, NUR FATIHAH SAADIQIN BINTI AHMAD ZAUTI
  11. (2016) CORROSION BEHAVIOUR OF POLY-L-LACTIC ACID COATED MAGNESIUM BY ELECTROSPINNING, WAN NUR ATIKAH BINTI HAJI WAN NAFI
  12. (2016) CORROSION BEHAVIOUR OF POLY-L-LACTIC ACID COATED MAGNESIUM BY ELECTROSPINNING, WAN NUR ATIKAH BINTI HAJI WAN NAFI
  13. (2015) Fabrication and Characterization of Magnesium Alloy Reinforce with Ghraphene Nanoplatelets (Mg0.2Mn/GNPs) for Medical Implants, NUR ANIS MAT NOOR
  14. (2014) MAGNESIUM AND ITS ALLOY FOR MEDICAL APPLICATIONS, NOORHIDAYAH BINTI ABDUL AZIZ
Under Graduate Students
  1. (2023) The Effect of Heat Treatment of WE43 on Mechanical Properties for Biomedical Applications 2.
  2. (2023) The Effect of Heat Treatment of WE43 on Mechanical Properties for Biomedical Applications 1
  3. (2023) The Effect of Heat Treatment of WE43 on Corrosion Behaviour for Biomedical Applications 2
  4. (2023) The Effect of Heat Treatment of WE43 on Corrosion Behaviour for Biomedical Applications 1
  5. (2023) Practices, Muhammad Fariq Qaiyum, Khairul Emir Bin Khairul Annuar, Muhammad Hazim bin Hamzah, Muhammad Hazzarul Haqimie
  6. (2022) To validate the corrosion behaviour simulation using Comsol Multiphysic software with lab experiments of AZ91 for biomedical applications
  7. (2022) To validate the corrosion behaviour simulation using Comsol Multiphysic software with lab experiments of AZ91 for automotive applications
  8. (2022) Study of phosphate coating on corrosion behaviour of AZ91 for automotive applications
  9. (2022) Study of Carbonate Coating Effect of Corrosion Behaviour of AZ91 for Automotive Applications
  10. (2022) Practices, Iskandar bin Eisa, Khairul Ikhwan bin Mohamad Sallehudd, Izzul Zarif bin Ahmat @ Ibrahim, Koh Wen Yu, Toh You Yi
  11. (2021) Vertical Farming Robotic Harvester (VFR Harvester)
  12. (2021) To study and stimulate the effect of solution conductivity on the corrosion behaviour of AZ91 for automotive applications
  13. (2021) To study and stimulate the effect of solution conductivity on corrosion behavior of AZ91 for biomedical application
  14. (2021) Study of the effect of cold plastic deformation on hardness and corrosion behaviour of AZ91 for biomedical applications
  15. (2021) Study of the effect of cold plastic deformation on hardness and corrosion behaviour of AZ91 for automotive applications
  16. (2021) Smart Ploughing
  17. (2021) Smart Clothes Protection
  18. (2021) Powering Electric Vehicle and Home Electrical System using Wind Energy from Wind Turbine
  19. (2021) Miniaturized Hydro-Electro Convertor

TEACHING

Bachelor
  1. (2023) KIX1001 - Engineering Mathematics 1
  2. (2023) KIX1002 - Engineering Mathematics 2
  3. (2023) KIG4073 - Metals and Alloys Engineering
  4. (2022) KIX1001 - Engineering Mathematics 1
  5. (2022) GIG1005 - Social Engagement
  6. (2022) KIX1003 - Thinking and Communication Skills
  7. (2021) KIX1001 - Engineering Mathematics 1
  8. (2021) GIG1005 - Social Engagement
  9. (2021) KIX1003 - Thinking and Communication Skills
  10. (2020) KIG4041 - Corrosion Engineering
  11. (2019) KIG4042 - Materials Selection
  12. (2018) KMEB3116 - Composite Materials
  13. (2017) KCEP4312 - Composite Materials Technology
  14. (2016) KMEB3116 - Composite Materials
  15. (2016) KMEB3116 - Composite Materials
  16. (2016) KMEB4346 - Aerospace Materials
  17. (2016) KXEX1110 - Basic Materials Science
  18. (2015) KMEB3116 - Composite Materials
  19. (2014) KMEB3116 - Composite Materials
  20. (2014) KXEX1110 - Foundation of Materials Science
  21. (2013) KMEB1107 - Introduction to Termodinamik
  22. (2013) KXEX1110 - Foundation of Materials Science
  23. (2012) KMEB3107 - Engineering Alloys
  24. (2008) KMEB2204 - Polymer Engineering

SOCIAL RESPONSIBILITY ACTIVITIES

  • Internal Auditor for Ms Iso/Iec 17024 Audit (2022), (27 Jun 2022 - 01 Jul 2022) (National)
  • Committee Member of Standard Assurance Committee for The 2022 - 2024 Council Session, Institute of Materials Malaysia, (13 May 2022 - 12 May 2024) (National)
  • Begin Challenge 2018 Judge, (11 Apr 2018 - 11 Apr 2018)
  • Begin Challenge 2018 Mentor, (28 Feb 2018 - 11 Apr 2018)

COURSE ATTENDED

Internal / External Course
INTERNAL COURSE- ORGANIZED BY PTJ
  1. KURSUS AUDITOR DALAMAN BAHARU UM 2021, Secara Dalam Talian (03 Mar 2021 - 05 Mar 2021)
  2. KURSUS SIX SIGMA, Bilik Studio 3, Level 3, Hotel Pullman Bangsar, Kuala Lumpur (02 Nov 2021 - 03 Nov 2021)
  3. KURSUS EFFECTIVE COMMUNICATION SKILLS SIRI 2, Secara Online (28 Sep 2021 - 29 Sep 2021)
  4. BENGKEL PROQAE SIRI 2/2022, Bilik Cube, Fak Sains Komputer & Tek. Maklumat, Universiti Malaya (16 Jun 2022 - 17 Jun 2022)