Curriculum Vitae

MADAM HANIE NADIA BINTI SHASMIN

Research Officer
  • Department of Biomedical Engineering
    Faculty of Engineering
  • hanie_nadia
  • +603-79672784

AREAS OF EXPERTISE


  • REHABILITATION ENGINEERING
    Biomechanics, Motion Analysis, Gait

ACADEMIC QUALIFICATION


  • MEng.Sc, (Sains Kejuruteraan)
    Universiti Malaya (UM)
  • BBIOENG, (Kejuruteraan Bioperubatan)
    Universiti Malaya (UM)

ADMINISTRATIVE DUTIES


  • AJK Kelab Sukan dan Rekreasi FKUM
    30 Sep 2023 - 31 Dec 2026 (Faculty)
  • Taskforce Pengesahan UMExpert Fakulti Kejuruteraan
    01 May 2021 - 30 Jun 2024 (Faculty)
  • AJK Protokol dan Sambutan Majlis Apresiasi FKUM
    11 Oct 2023 - 22 Dec 2023 (Faculty)
  • Bursary, 12th Asian-Pacific Conference on Biomechanics 2023
    01 Nov 2022 - 17 Dec 2023 (International)
  • Task Force Data Validation Instrumen Pemantauan COR Data
    15 Jun 2023 - 16 Jun 2023 (University Malaya)
  • Rapporteur Bengkel Matriks Penyelidikan
    16 Jan 2023 - 19 Jan 2023 (University Malaya)

PUBLICATIONS


Article in Journal
WoS
  1. Al Kouzbary, Mouaz; Al Kouzbary, Hamza; Liu, Jingjing; Shasmin, Hanie Nadia; Arifin, Nooranida; Osman, Noor Azuan Abu (2024). Analysis of human ambulation as a chaotic time-series: with nonlinear dynamics tools, COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING. . doi:10.1080/10255842.2024.2399023
  2. Liu, Jingjing; Liu, Jingang; Cheah, Pei Yi; Al Kouzbary, Mouaz; Al Kouzbary, Hamza; Yao, Selina X.; Shasmin, Hanie Nadia; Arifin, Nooranida; Razak, Nasrul Anuar Abd; Abu Osman, Noor Azuan (2024). Design and preliminary verification of a novel powered ankle-foot prosthesis: From the perspective of lower-limb biomechanics compared with ESAR foot, PLOS ONE. 19(6). doi:10.1371/journal.pone.0303397
  3. Liu, Jingjing; Naeem, Muhammad Awais; Al Kouzbary, Mouaz; Al Kouzbary, Hamza; Shasmin, Hanie Nadia; Arifin, Nooranida; Abd Razak, Nasrul Anuar; Abu Osman, Noor Azuan (2023). Effect of Infill Parameters on the Compressive Strength of 3D-Printed Nylon-Based Material, POLYMERS. 15(2). doi:10.3390/polym15020255
  4. Al Kouzbary, Hamza; Al Kouzbary, Mouaz; Tham, Lai Kuan; Liu, Jingjing; Shasmin, Hanie Nadia; Abu Osman, Noor Azuan (2022). Generating an Adaptive and Robust Walking Pattern for a Prosthetic Ankle-Foot by Utilizing a Nonlinear Autoregressive Network With Exogenous Inputs, IEEE TRANSACTIONS ON NEURAL NETWORKS AND LEARNING SYSTEMS. . doi:10.1109/TNNLS.2021.3076060
  5. Al Kouzbary, Mouaz; Al Kouzbary, Hamza; Liu, Jingjing; Khamis, Taha; Al-Hashimi, Zaina; Shasmin, Hanie Nadia; Arifin, Nooranida; Abu Osman, Noor Azuan (2022). Robotic Knee Prosthesis with Cycloidal Gear and Four-Bar Mechanism Optimized Using Particle Swarm Algorithm, ACTUATORS. 11(9). doi:10.3390/act11090253
  6. Ibrahim, Norzuria; Abu Osman, Noor Azuan; Mokhtar, Abdul Halim; Arifin, Nooranida; Usman, Juliana; Shasmin, Hanie Nadia (2022). Contribution of the arm segment rotations towards the horizontal ball and racket head velocities during forehand long shot and drop shot services in table tennis, SPORTS BIOMECHANICS. . doi:10.1080/14763141.2020.1726995
  7. Liu, Jingjing; Abu Osman, Noor Azuan; Al Kouzbary, Mouaz; Al Kouzbary, Hamza; Abd Razak, Nasrul Anuar; Shasmin, Hanie Nadia; Arifin, Nooranida (2022). Optimization and Comparison of Typical Elastic Actuators in Powered Ankle-foot Prosthesis, INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS. 20(1), 232-242. doi:10.1007/s12555-020-0980-x
  8. Liu, Jingjing; Abu Osman, Noor Azuan; Al Kouzbary, Mouaz; Al Kouzbary, Hamza; Abd Razak, Nasrul Anuar; Shasmin, Hanie Nadia; Arifin, Nooranida (2022). Stiffness estimation of planar spiral spring based on Gaussian process regression, SCIENTIFIC REPORTS. 12(1). doi:10.1038/s41598-022-15421-1
  9. Liu, J. J., Abu Osman, N. A., Al Kouzbary, M., Al Kouzbary, H., Abd Razak, N. A., Shasmin, H. N., & Arifin, N. (2021). Classification and Comparison of Mechanical Design of Powered Ankle-Foot Prostheses for Transtibial Amputees Developed in the 21st Century: A Systematic Review. Journal of Medical Devices-Transactions of the Asme, 15(1), 16. doi: 10.1115/1.4049437
  10. Al Kouzbary, M., Abu Osman, N. A., Al Kouzbary, H., Shasmin, H. N., & Arifin, N. (2020). Towards Universal Control System for Powered Ankle-Foot Prosthesis: A Simulation Study. International Journal of Fuzzy Systems, 22(4), 1299-1313. doi: 10.1007/s40815-020-00855-4
  11. Shaari, I. H., Abu Osman, N. A., & Shasmin, H. N. (2020). A case study on interface pressure pattern of two garment orthoses on a child with cerebral palsy. Proceedings of the Institution of Mechanical Engineers Part H-Journal of Engineering in Medicine, 234(8), 884-894. doi: 10.1177/0954411920923541
  12. Yahya, T., Hamzaid, N. A., Ali, S., Jasni, F., & Shasmin, H. N. (2020). Classification of standing and sitting phases based on in-socket piezoelectric sensors in a transfemoral amputee. Biomedical Engineering-Biomedizinische Technik, 65(5), 567-576. doi: 10.1515/bmt-2018-0249
  13. Jasni, F., Hamzaid, N. A., Al-Nusairi, T. Y., Yusof, N. H. M., Shasmin, H. N., Ng, S. C. (2019). Feasibility of a Gait Phase Identification Tool for Transfemoral Amputees Using Piezoelectric-Based In-Socket Sensory System. Ieee Sensors Journal, 19(15), 6437-6444. doi:10.1109/jsen.2019.2910161
  14. Shaari, I. H., Abu Osman, N. A., Shasmin, H. N. (2018). Interface Pressure of Lycra Orthosis at Different Postures in Children with Cerebral Palsy (CP). Sains Malaysiana, 47(4), 763-771. doi:10.17576/jsm-2018-4704-15
  15. Al-Fakih, E., Arifin, N., Pirouzi, G., Adikan, F. R. M., Shasmin, H. N., Abu Osman, N. A. (2017). Optical fiber Bragg grating-instrumented silicone liner for interface pressure measurement within prosthetic sockets of lower-limb amputees. Journal of Biomedical Optics, 22(8), 8. doi: 10.1117/1.jbo.22.8.087001
  16. Jasni, Farahiyah; Hamzaid, Nur Azah; Abd Muthalif, Asan Gani; Zakaria, Zafirah; Shasmin, Hanie Nadia; Ng, Siew-Cheok (2016). In-Socket Sensory System for Transfemoral Amputees Using Piezoelectric Sensors: An Efficacy Study, IEEE-ASME TRANSACTIONS ON MECHATRONICS. 21(5), 2466-2476. doi:10.1109/TMECH.2016.2578679
  17. Tripathy, Ashis; Pramanik, Sumit; Manna, Ayan; Shasmin, Hanie Nadia; Radzi, Zamri; Abu Osman, Noor Azuan (2016). Uniformly Porous Nanocrystalline CaMgFe1.33Ti3O12 Ceramic Derived Electro-Ceramic Nanocomposite for Impedance Type Humidity Sensor, SENSORS. 16(12). doi:10.3390/s16122029
Others
  1. Tripathy A, Pramanik S, Manna A, Shah NFA, Shasmin HN, Radzi Z, Abu Osman NA. (2016). Synthesis and Characterizations of Novel Ca-Mg-Ti-Fe-Oxides Based Ceramic Nanocrystals and Flexible Film of Polydimethylsiloxane Composite with Improved Mechanical and Dielectric Properties for Sensors. Sensors 16(3), 292-313.
  2. Herman Shah Abd Rahman, Dipankar Choudhury, Noor Azuan Abu Osman, Hanie Nadia Shasmin & Wan Abu Bakar Wan Abas. 2013. In vivo and in vitro outcomes of alumina, zirconia and their composited ceramic-on-ceramic hip joints. Journal of the Ceramic Society of Japan 121(4): 382-387
  3. Shasmin HN, Abu Osman NA, Razali R, Usman J, Abas WABW. 2007. The effect of load carriage among primary school boys: A preliminary study. Journal of Mechanics in Medicine and Biology. 7(3):265-74.
  4. Shasmin HN, Osman NA, Latif LA, Usman J, Abas WW. 2007. A New Pylon Materials In Transtibial Prosthesis: A Preliminary Study. Journal of Biomechanics. 40: S297.
  5. Razali R, Osman NA, Shasmin HN, Usman J, Abas WW. 2006. Acceptable load carriage for primary school girls. European Journal of Scientific Research.15(3):396-403.
Article in Proceeding
  1. Shasmin HN, Abu Osman NA, Latif LA. 2008. Comparison between Biomechanical Characteristics of Stainless Steel and Bamboo Pylons: A Preliminary Study. 4th Kuala Lumpur International Conference On Biomedical Engineering 2008. IFMBE Proceedings 21(1-2):851-3.
  2. Shasmin HN, Abu Osman NA, Latif LA. 2008. Economical Tube Adapter Material in Below Knee Prosthesis. 4th Kuala Lumpur International Conference On Biomedical Engineering 2008. IFMBE Proceedings 21(1-2):407-9.
  3. Shasmin HN, Abu Osman NA, Razali R, Usman J, Wan Abas WA. 2007. A preliminary study of acceptable load carriage for primary school children. 3rd Kuala Lumpur International Conference On Biomedical Engineering 2006. IFMBE Proceedings. 15:171-4.

RESEARCH PROJECT


National
  1. 2024 - 2026, MRUN
    Smart Camera-based Real-time Monitoring And Analysis Of Stem Cell Culture For Quality Control And Anomaly Detection ( Principal Investigator(PI))
  2. 2023 - 2025, Bantuan Khas Penyelidikan (BKP Special)
    Utilization Of Modern Gearbox For High-torque Robotic Ankle-foot Prosthesis ( Co-Researcher)
  3. 2023 - 2025, Bantuan Khas Penyelidikan (BKP Special)
    Smart Prosthetic Feet For People With Lower Limb Amputation: Internet Of Things (iot) Solution For Remote Monitoring ( Co-Researcher)
  4. 2023 - 2025, Bantuan Khas Penyelidikan (BKP Special)
    An Artificial Intelligent Framework Development with High-Level Intent Recognition for Robotic Ankle-Foot Prosthesis ( Co-Researcher)
  5. 2017 - 2020, UM Grant - Frontier Research Grant
    Design And Development Of Powered Ankle-foot Prosthesis ( Co-Researcher)
  6. 2007 - 2008, RU Geran
    PYLON MATERIALS IN TRANSTIBIAL PROSTHESIS ( Principal Investigator(PI))
Private
  1. 2024 - 2026, Private Funding
    Optimization of 3D Printed Braces For Scoliosis Treatment ( Co-Researcher)
  2. 2022 - 2024, Private Funding
    Development Of Powered Ankle-foot Prosthesis ( Co-Researcher)

PAPER PRESENTED


PRESENTER
  1. Economical Tube Adapter Material in Below Knee Prosthesis, 4th Kuala Lumpur International Conference On Biomedical Engineering 2008, University Malaya (International) (25 Jun 2008 - 28 Jun 2008)
  2. Comparison between Biomechanical Characteristics of Stainless Steel and Bamboo Pylons: A Preliminary Study, 4th Kuala Lumpur International Conference On Biomedical Engineering 2008. IFMBE Proceedings, University Malaya (International) (25 Jun 2008 - 28 Jun 2008)
  3. A preliminary study of acceptable load carriage for primary school children., 3rd Kuala Lumpur International Conference On Biomedical Engineering 2006 IFMBE Proceedings, University Malaya (International) (11 Dec 2006 - 14 Dec 2006)

PATENT/IPR


  • In-Socket Piezo-based Sensory System for Transfemoral Prosthetic Leg
    PATENT

COURSE ATTENDED


Internal / External Course
EXTERNAL COURSE
  1. INTENSIVE TRAINING VICON MOTION SYSTEM, Oxford United Kingdom (22 Feb 2016 - 26 Feb 2016)
INTERNAL COURSE
  1. STRATEGIC HUMAN RESOURCE MANAGEMENT, Secara Dalam Talian (15 Jun 2021 - 15 Jun 2021)
  2. MANAGING PEOPLE - LEADERSHIP AND EFFECTIVE SUPERVISION, Secara Dalam Talian (22 Jun 2021 - 22 Jun 2021)
  3. UNDERSTANDING MALAYSIA RESEARCH ASSESSMENT (MYRA), Dalam Talian (18 Aug 2021 - 18 Aug 2021)
  4. WRITING AND PUBLISHING RESEARCH ARTICLES, Dalam Talian (24 Aug 2021 - 24 Aug 2021)
  5. FROM RESEARCH TO COMMERCIALISATION AND COMMUNITY ENGAGEMENT, Dalam Talian (21 Sep 2021 - 21 Sep 2021)
  6. HIGHLY EFFECTIVE COMMUNICATION AND NEGOTIATION SKILLS, Bilik Senat, Aras 4, Bangunan Canseleri (21 Nov 2023 - 21 Nov 2023)
INTERNAL COURSE- ORGANIZED BY PTJ
  1. ISO/IEC 17025:2017 INTRODUCTION & IMPLEMENTATION, Fakulti Farmasi, UM (26 Nov 2020 - 27 Nov 2020)