Curriculum Vitae

ASSOCIATE PROF. DR. HENDRIK SIMON CORNELIS METSELAAR

Associate Professor
  • Department of Mechanical Engineering
    Faculty of Engineering
  • h.metselaar
  • +603 79674451

AREAS OF EXPERTISE


  • ENERGY STORAGE
    phase change materials, thermal energy storage
  • MATERIAL PROCESSING TECHNOLOGY
    Suspensions, slurries, colloidal suspensions.
  • TRIBOLOGY OF CERAMICS
    wear, friction, ceramics, composites
  • COMPOSITE MATERIALS
    ceramic-ceramic composites
  • CERAMICS
    processing of ceramics, alumina, zirconia, ZTA, ferrites

ACADEMIC QUALIFICATION


  • PHD(TWENTE)(2001), (Energy Efficiency)
    University of Twente (Nl)
  • MENG(TWENTE)(1994), (CHEMICAL ENGINEERING)
    University of Twente(Nl)

ADMINISTRATIVE DUTIES


  • Course Coordinator
    01 Jan 2022 - 31 Dec 2022 (Deputy Dean (Research) Office, Faculty of Engineering)
  • Head
    01 Jan 2021 - 31 Dec 2021 (Centre for Advanced Materials (Cam), Faculty of Engineering)
  • Coordinator
    16 Dec 2019 - 15 Dec 2021 (Deputy Dean (Research) Office, Faculty of Engineering)
  • Head
    01 Jan 2020 - 31 Aug 2020 (Centre for Advanced Materials (Cam), Faculty of Engineering)
  • Head, centre of research
    01 Jan 2018 - 31 Dec 2020 (Deputy Dean (Research) Office, Faculty of Engineering)
  • purchase technical committee
    28 Oct 2020 - 01 Dec 2020 (University Malaya)
  • Head
    01 Jan 2016 - 30 Nov 2016 (Centre for Advanced Materials (Cam), Faculty of Engineering)
  • AJK penilaian bagi permohonan geran penyelidikan di bawah tadbir urus IPPP peringkat UM
    01 Jan 2015 - 31 Dec 2016 (University Malaya)
  • Head
    01 Jan 2015 - 31 Dec 2015 (Centre for Advanced Materials (Cam), Faculty of Engineering)
  • Head, center of Research
    01 Jan 2010 - 31 Dec 2015 (University Malaya)
  • Programme Coordinator
    01 Jul 2011 - 30 Jun 2014 (Department of Mechanical Engineering, Faculty of Engineering)

MEMBERSHIPS


  • IMECHE, MEMBER
    2013 to 2023 (International)
  • EDITOR, BOARD MEMBER
    2012 to 2022 (International)

AWARD AND STEWARDSHIP


  • Judge PISTEK
    Ministry of Education, 2017 (National)
  • CERTIFICATE OF EXCELLENT SERVICE
    University of Malaya, 2006 (University)

PUBLICATIONS


Article in Journal
WoS
  1. Asadi, I., Shafigh, P., Hashemi, M., Akhiani, A. R., Maghfouri, M., Sajadi, B., . . . Metselaar, H. S. C. (2021). Thermophysical properties of sustainable cement mortar containing oil palm boiler clinker (OPBC) as a fine aggregate. Construction and Building Materials, 268, 15. doi: 10.1016/j.conbuildmat.2020.121091
  2. Boudouh, D., Hamana, D., Metselaar, H. S. C., Achour, S., Chetibi, L., & Akhiani, A. R. (2021). Low-temperature green route synthesis of Fe3O4-C nanocomposite using Olive Leaves Extract. Materials Science and Engineering B-Advanced Functional Solid-State Materials, 271, 7. doi: 10.1016/j.mseb.2021.115276
  3. Boudouh, D., Ikram, R., Jan, B. M., Metselaar, H. S. C., Hamana, D., & Kenanakis, G. (2021). Synthesis, Characterization and Filtration Properties of Ecofriendly Fe3O4 Nanoparticles Derived from Olive Leaves Extract. Materials, 14(15), 16. doi: 10.3390/ma14154306
  4. Kee, C. C., Ang, B. C., & Metselaar, H. S. C. (2021). Synthesis of europium-doped calcium silicate hydrate via hydrothermal and coprecipitation method. Ceramics International, 47(4), 4803-4812. doi: 10.1016/j.ceramint.2020.10.050
  5. Naghavi, M. S., Metselaar, H. S. C., Ang, B. C., Zamiri, G., Esmailzadeh, A., & Nasiri-Tabrizi, B. (2021). A critical assessment on synergistic improvement in PCM based thermal batteries. Renewable & Sustainable Energy Reviews, 135, 8. doi: 10.1016/j.rser.2020.110259
  6. Nuge, T., Liu, Z. Q., Liu, X. L., Ang, B. C., Andriyana, A., Metselaar, H. S. C., & Hoque, M. E. (2021). Recent Advances in Scaffolding from Natural-Based Polymers for Volumetric Muscle Injury. Molecules, 26(3), 24. doi: 10.3390/molecules26030699
Scopus
  1. Javadi F.S., Metselaar H.S.C., Ganesan P.B. (2022). Experimental Investigation on Prototype Latent Heat Thermal Battery Charging and Discharging Function Integrated with Solar Collector, Energy Engineering: Journal of the Association of Energy Engineering. 119(4), 1587-1610. doi:10.32604/ee.2022.020304
Others
  1. Highly hydrophobic silanized melamine foam for facile and uniform assembly of graphene nanoplatelet towards efficient light-to-thermal energy storage
  2. Aunkor Md. Toasin Hossain, Raihan Topu, Prodhan Shamsul H., Metselaar H. S. C., Malik Syeda Umme Fahmida and Azad Abul Kalam 2020, Antibacterial activity of graphene oxide nanosheet against multidrug resistant superbugs isolated from infected patients, R. Soc. open sci.7200640
  3. Javadi, F.S., Metselaar, H.S.C., Ganesan, P. (2020) Performance improvement of solar thermal systems integrated with phase change materials (PCM), a review Solar Energy, 206, pp. 330-352.
  4. MS Sukiman, A Andriyana, BC Ang, HSC Metselaar. (2020). Elastic properties of electrospun PVDF nanofibrous membranes: Experimental investigation and numerical modelling using pixel-based finite element method. Polymer Testing. 81, 106218.
  5. Mazumder, S., Metselaar, H.S.C., Sukiman, N.L., Zulkifli, N.W.M.(2020) An overview of fluoride-based solid lubricants in sliding contacts Journal of the European Ceramic Society,
  6. Naghavi, M. S., Ang, B. C., Rahmanian, B., Naghavi, S., Bazri, S., Mahmoodian, R., & Metselaar, H. S. C. (2020). On-demand dynamic performance of a thermal battery in tankless domestic solar water heating in the tropical region. Applied Thermal Engineering, 167, 114790.
  7. Sadeghinezhad, E., Akhiani, A.R., Metselaar, H.S.C., Tahan Latibari, S., Mehrali, M., Mehrali, M.(2020) Parametric study on the thermal performance enhancement of a thermosyphon heat pipe using covalent functionalized graphene nanofluids (2020) Applied Thermal Engineering, 175, art. no. 115385, .
  8. Fauzi, H., Metselaar, H.S.C., Mahlia, T.M.I., Silakhori, M., Ong, H.C.(2018) Investigation of thermal characteristic of eutectic fatty acid/damar gum as a composite phase change material (CPCM), Green Energy and Technology, pp. 607-616.
  9. Aditya, L., Mahlia, T.M.I., Rismanchi, B., Ng, H.M., Hasan, M.H., Metselaar, H.S.C., Muraza, O., Aditiya, H.B. (2017), A review on insulation materials for energy conservation in buildings, Renewable and Sustainable Energy Reviews, 73, pp. 1352-1365
  10. Kee, S.Y., Munusamy, Y., Ong, K.S., Metselaar, H.S.C., Chee, S.Y., Lai, K.C. (2017) Thermal performance study of composite phase change material with polyacrylicand conformal coating, Materials, 10 (8), art. no. 873
  11. Mehrali, M., Sadeghinezhad, E., Akhiani, A.R., Tahan Latibari, S., Metselaar, H.S.C., Kherbeet, A.S., Mehrali, M. (2017), Heat transfer and entropy generation analysis of hybrid graphene/Fe3O4 ferro-nanofluid flow under the influence of a magnetic field, Powder Technology, 308, pp. 149-157
  12. Naghavi, M. S., Ong, K. S., Badruddin, I. A., Mehrali, M., & Metselaar, H. S. C. (2017). Thermal performance of a compact design heat pipe solar collector with latent heat storage in charging/discharging modes. Energy, 127, 101-115.
  13. Sadeghinezhad, E., Mehrali, M., Akhiani, A.R., Tahan Latibari, S., Dolatshahi-Pirouz, A., Metselaar, H.S.C., Mehrali M.,(2017) , Experimental study on heat transfer augmentation of graphene based ferrofluids in presence of magnetic field Applied Thermal Engineering, 114, pp. 415-427
  14. Sebt Ahmadi, S.S., Riahifar, R., Raissi, B., Sahba Yaghmaee, M., Cornelis Metselaar, H.S., Javaheri, M. (2017) , Electrophoretic deposition of MWCNT on a PTFE layer for making working electrode of oxygen sensor, Journal of the Electrochemical Society, 164 (12), pp. B506-B512
  15. Aunkor, M.T.H., Mahbubul, I.M., Saidur, R., Metselaar, H.S.C. The green reduction of graphene oxide (2016) RSC Advances, 6 (33), pp. 27807-27825
  16. Mehrali, M., Sadeghinezhad, E., Akhiani, A.R., Tahan Latibari, S., Talebian, S., Dolatshahi-Pirouz, A., Metselaar, H.S.C., Mehrali, M. An ecofriendly graphene-based nanofluid for heat transfer applications (2016) Journal of Cleaner Production, 137, pp. 555-566
  17. Anisur, M.R., Kibria, M.A., Mahfuz, M.H., Saidur, R., Metselaar, I.H.S.C. Analysis of a thermal energy storage system for air cooling-heating application through cylindrical tube (2013) Energy Conversion and Management, 76, pp. 732-737.
  18. Anisur, M.R., Mahfuz, M.H., Kibria, M.A., Saidur, R., Metselaar, I.H.S.C., Mahlia, T.M.I. Curbing global warming with phase change materials for energy storage (2013) Renewable and Sustainable Energy Reviews, 18, pp. 23-30
  19. Fauzi, H., Metselaar, H.S.C., Mahlia, T.M.I., Silakhori, M. Sodium laurate enhancements the thermal properties and thermal conductivity of eutectic fatty acid as phase change material (PCM) (2013) Solar Energy
  20. Fauzi, H., Metselaar, H.S.C., Mahlia, T.M.I., Silakhori, M., Nur, H. Phase change material: Optimizing the thermal properties and thermal conductivity of myristic acid/ palmitic acid eutectic mixture with acid-based surfactants (2013) Applied Thermal Engineering, 60 (1-2), pp. 261-265
  21. Ghadimi, A., Metselaar, H.S.C. Clustering theory evaluation for thermal conductivity enhancement of titania nanofluid (2013) Ceramic Transactions, 240, pp. 219-227
  22. Ghadimi, A., Metselaar, I.H. The influence of surfactant and ultrasonic processing on improvement of stability, thermal conductivity and viscosity of titania nanofluid (2013) Experimental Thermal and Fluid Science, 51, pp. 1-9.
  23. Lotfizadeh Dehkordi, B., Kazi, S.N., Hamdi, M., Ghadimi, A., Sadeghinezhad, E. & Metselaar, H.S.C. 2013. Investigation of Viscosity and Thermal Conductivity of Alumina Nanofluids with Addition of SDBS. Heat and Mass Transfer 49(8) : 1109-1115. DOI : /s00231-013-1153-8.
  24. Lotfizadehdehkordi, B., Ghadimi, A., Metselaar, H.S.C. Box-Behnken experimental design for investigation of stability and thermal conductivity of TiO2 nanofluids (2013) Journal of Nanoparticle Research, 15 (1), art. no. 1369
  25. Mehrali M, Shirazi FS, Mehrali M, Metselaar HSC, Kadri NAB, Osman NAA. 2013. Dental implants from functionally graded materials. J Biomed Mater Res Part A 101(10):3046 3057.
  26. Mehrali, M., Latibari, S.T., Mehrali, M., Indra Mahlia, T.M., Cornelis Metselaar, H.S. Preparation and properties of highly conductive palmitic acid/graphene oxide composites as thermal energy storage materials (2013) Energy, 58, pp. 628-634.
  27. Mehrali, M., Latibari, S.T., Mehrali, M., Indra Mahlia, T.M., Cornelis Metselaar, H.S., Naghavi, M.S., Sadeghinezhad, E., Akhiani, A.R. Preparation and characterization of palmitic acid/ graphene nanoplatelets composite with remarkable thermal conductivity as a novel shape-stabilized phase change material (2013) Applied Thermal Engineering, 61 (2), pp. 633-640.
  28. Mehrali, M., Latibari, S.T., Mehrali, M., Metselaar, H.S.C., Silakhori, M. Shape-stabilized phase change materials with high thermal conductivity based on paraffin/graphene oxide composite (2013) Energy Conversion and Management, 67, pp. 275-282.
  29. Rahman, M.M., Metselaar, H.S.C., Karmaker, P.C. Nanoscale domain structures in 0.91Pb (Zn1/3Nb2/3)O3-0.09PbTiO3 (91PZN-9PT) single crystals studied by piezoresponse force microscopy (2013) Phase Transitions, . Article in Press.
  30. Rezaei, M., Anisur, M.R., Mahfuz, M.H., Kibria, M.A., Saidur, R., Metselaar, I.H.S.C. Performance and cost analysis of phase change materials with different melting temperatures in heating systems (2013) Energy, 53, pp. 173-178.
  31. Sadollah, A., Ghadimi, A., Metselaar, I.H., Bahreininejad, A. Prediction and optimization of stability parameters for titanium dioxide nanofluid using response surface methodology and artificial neural networks (2013) Science and Engineering of Composite Materials, 20 (4), pp. 319-330.
  32. Shirazi, F.S., Ataollahi Oshkour, A., Cornelis Metselaar, H.S., Mehrali, M., Kadri, N.A., Abu Osman, N.A. Characterization and mechanical properties of calcium silicate/citric acid-based polymer composite materials (2013) International Journal of Applied Ceramic Technology,
  33. Silakhori, M., Naghavi, M.S., Metselaar, H.S.C., Mahlia, T.M.I., Fauzi, H., Mehrali, M. Accelerated thermal cycling test of microencapsulated paraffin wax/polyaniline made by simple preparation method for solar thermal energy storage (2013) Materials, 6 (5), pp. 1608-1620.
  34. Tahan Latibari, S., Mehrali, M., Mehrali, M., Indra Mahlia, T.M., Cornelis Metselaar, H.S. Synthesis, characterization and thermal properties of nanoencapsulated phase change materials via sol-gel method (2013) Energy, 61, pp. 664-672.
  35. Tahan Latibari, S., Mehrali, M., Mottahedin, L., Fereidoon, A., Metselaar, H.S.C. Investigation of interfacial damping nanotube-based composite (2013) Composites Part B: Engineering, 50, pp. 354-361
  36. Yeo, W.S., Nuramirah, Z., Metselaar, H.S.C., Ong, T.H. X-ray powder diffraction studies of mechanically milled cobalt (2013) Advanced Materials Research, 626, pp. 913-917.
  37. A C Hee, H S C Metselaar, M R Johan, M. Mehrali. Preparation of Nickel Zinc Ferrite by Electrophoretic Deposition. Journal of The Electrochemical Society. (2012)159 (1) E18-E22
  38. Askari, E., Mehrali, M., Metselaar, I.H.S.C., Kadri, N.A., Rahman, M. Fabrication and mechanical properties of Al 2O 3/SiC/ ZrO 2 functionally graded material by electrophoretic deposition (2012) Journal of the Mechanical Behavior of Biomedical Materials, 12, pp. 144-150.
  39. Baradararan, S., Hamdi, M., Metselaar, I.H. Biphasic calcium phosphate (BCP) macroporous scaffold with different ratios of HA/β-TCP by combination of gel casting and polymer sponge methods (2012) Advances in Applied Ceramics, 111 (7), pp. 367-373.
  40. Hee, A.C., Mehrali, M., Metselaar, H.S.C., Mehrali, M., Osman, N.A.A. Comparison of nanostructured nickel zinc ferrite and magnesium copper zinc ferrite prepared by water-in-oil microemulsion (2012) Electronic Materials Letters, 8 (6), pp. 639-642.
  41. Nur, H., Kee, G.L., Hamdan, H., Indra Mahlia, T.M., Efendi, J., Cornelis Metselaar, H.S. Organosulfonic acid functionalized zeolite ZSM-5 as temperature tolerant proton conducting material (2012) International Journal of Hydrogen Energy, 37 (17), pp. 12513-12521.
  42. A review of nanofluid stability properties and characterization in stationary conditions, Ghadimi, A.; Saidur, R.; Metselaar, H. S. C.,International Journal of Heat and Mass Transfer (54) 17-18 pp 4051-4068, 2011
  43. Mehrali, M., Wakily, H. and Metselaar, I.H.S.C. Residual stress and mechanical properties of Al2O3/ZrO2 functionally graded material prepared by EPD from 2-butanone based suspension. Advances in Applied Ceramics.2011(1): 35--40.
  44. Shahrooi S., Metselaar I.H. & Huda Z. 2010 Evaluating a strain energy fatigue method using cyclic plasticity models. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES 33(8): 530--537
  45. Shahrooi S., Metselaar I.H. & Huda Z. Evaluation of cyclic plasticity models of multi-surface and non-linear hardening by an energy-based fatigue criterion.JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY 24(6):1255--1260
  46. W. S. Yeo and H. S. C. Metselaar. The allotropic phase transformation in milled Co and Al2O3 powder mixtures prepared by mechanical alloying. Synthesis and reactivity in inorganic, metal-organic and nano-metal chemistry, 38:341 345, 2008.
  47. Koay, M.H., Metselaar, I.H.S.C., and Yaacob, I.I.. 2006. Study on the electromagnetic properties of various compositions of magnesium-copper-zinc ferrites. Key Engineering Materials 306--308 II, 875--880
  48. Kerkwijk, B, Winnubst, A.J.A., Verweij, H., Mulder, E.J., Metselaar, H.S.C. & Schipper, D.J. 1999. Tribological properties of nanoscale alumina-zirconia composites. Wear 229(2):1293--1302
  49. V. A. C. HAANAPPEL, D. VAN DER VENDEL, H. S. C. METSELAAR, H. D. VAN CORBACH, T. FRANSEN, AND P. J. GELLINGS. The mechanical properties of thin alumina films deposited by metal-organic chemical-vapor- deposition. Thin Solid Films, 254 1995
Books
  1. Encyclopedia of Renewable and Sustainable Materials (2020)
Chapter in Books
  1. Mazumder S, Metselaar, HSC, Nurin Whaida Zulkifli, Sukiman, NL (2020) Tribomechanical Behaviour of non-oxide based Ceramic Matrix Composites in Dry Sliding. In Tribological applications of composite materials, Springer Verlag
  2. Ghadimi, A., Metselaar, H.S.C. (2013) Clustering Theory Evaluation for Thermal Conductivity Enhancement of Titania Nanofluid. In Processing and Properties of Advanced Ceramics and Composites V, 240, pp. 219-228, Wiley
Article in Proceeding
  1. Firdaus, M.Y.N., Osman, H., Metselaar, H.S.C., Rozyanty, A.R. (2017) Extraction of silica content from the Cymbopogan citratus (lemon grass) and its performance as reinforcement for polymers,AIP Conference Proceedings, 1865, art. no. 040016
  2. SHAHROOI, S; METSELAAR, IH; HUDA, Z; et al. Source: Imecs 2009: International Multiconference of Engineers and Computer Scientists, Vols I and II Pages: 1748-1750 Published: 2009

RESEARCH PROJECT


National
  1. 2020 - 2024, Fundamental Research Grant Scheme (FRGS)
    Friction Mechanism In Self-lubricated Non-oxide/fluoride Ceramic-ceramic Composites At High Temperature ( Co-Researcher)
  2. 2019 - 2023, RU Geran
    Tephrology And Geochemistry Of Youngest Toba Tuff Ashes From Quaternary Sediments In Peninsular Malaysia And Implications To Labu Sayong Industry ( Co-Researcher)
  3. 2019 - 2023, Others MOHE - Top 100 (IIRG)-SAH
    Technology Content Of Museum Ceramics For Dating And Recreation ( Principal Investigator(PI))
  4. 2020 - 2023, Others MOHE - Top 100 (IIRG)-IISS
    Impacts Of Local Msw Residue From Co-processing On Quality Of Low Carbon Cement ( Co-Researcher)
  5. 2019 - 2022, RU Geran - Fakulti Program
    Towards The Development Of Improved Tribocorrosion Performance Of Aluminium Alloys Via Surface Modification ( Principal Investigator(PI))
  6. 2020 - 2022, RU Geran - Fakulti Program
    Development of Non Oxide Ceramic Matrix Composite Reinforced Silicon Carbide Nanorods with Improved Tribological Properties ( Co-Researcher)
  7. 2019 - 2021, Fundamental Research Grant Scheme (FRGS)
    Biogenic Calcium Phosphate Derived From Waste Materials By Microwave Irradiation ( Co-Researcher)
  8. 2014 - 2017, Fundamental Research Grant Scheme (FRGS)
    Extraction Of Silica Content From The Cymbopogan Citratus (Lemon Grass) And Its Performance As Reinforcement For Polymers ( Consultant)
  9. 2011 - 2015, High Impact Research (HIR)
    Phase Change material (PCM) for energy storage system ( Principal Investigator(PI))
  10. 2011 - 2015, High Impact Research (HIR)
    Phase Change Material (PCM) for energy storage system (RM5,599,400.00) ( Principal Investigator(PI))
  11. 2009 - 2011, ScienceFund
    Preparation of high-permeability ferrite layers by electrophoretic deposition ( Principal Investigator(PI))
  12. 2010 - 2011, Geran Penyelidikan Universiti Malaya (UMRG)
    PREPARATION OF HOMOGENEOUS CERAMIC COMPOSITES USING COLLOIDAL FILTRATION ( Principal Investigator(PI))
  13. 2009 - 2010, Geran Penyelidikan Universiti Malaya (UMRG)
    PREPARATION OF HOMOGENEOUS CERAMIC COMPOSITES USING COLLOIDAL FILTRATION ( Principal Investigator(PI))
University
  1. 2008 - 2009, Short Term Research Fund (Vote F)(PJP)
    PREPARATION OF HOMOGENEOUS CERAMIC COMPOSITES USING COLLOIDAL FILTRATION ( Principal Investigator(PI))

CONSULTANCY PROJECT


  • Editor Journal of The Asian Ceramic Societies (Jacers), Taylor & Francis
    01 Dec 2012 - 01 Dec 2020 (International)
  • Internal Examiner, Engineering Faculty , University of Malaya
    01 Dec 2014 - 01 Dec 2014 (National)

PAPER PRESENTED


PLENARY SPEAKER
  1. calcium silicate-based biomaterials, FIRST INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS AND MANUFACTURING 2019 (ICRAMM 2019), Department of Mechanical Engineering, KLE Dr. Shesgiri College of Engineering and Technology, Belagavi, Karnataka, India. (International) (12 Sep 2019 - 14 Sep 2019)
  2. bioceramics for hard tissue replacement, 1st International Conference on Advanced Ceramics, Iranian Ceramic Society (International) (04 May 2015 - 06 May 2015)
PRESENTER
  1. Thermal characteristic of fatty acid/shorea javanica as composite phase change material (CPCM), Renewable Engineering & Green Technology Conference, UniMAP (International) (16 Dec 2014 - 18 Dec 2014)
  2. Effective Photovoltaic System Design by Applying MPPT Algorith and Phase Change Material, 2014 IET 7th International Conference on Power Electronics, Machines & Drives (PEMD), IEEE (International) (08 Apr 2014 - 10 Apr 2014)
  3. Numerical and Experimental Vibration Analysis for Fatigue Failure Investigation in a Vertical Axis Pump Station, International Multi-Conference of Engineers and Computer Scientists (International) (18 Mar 2009 - 20 Mar 2009)

ACADEMIC/PROF. SERVICES


Evaluation
  1. (2021) Machinability Studies On Sic Reinforced With Aluminium 6061 and 7075 Alloy, International, (External Examiner)
  2. (2020) External examiner to `Optimization on Sintering Parameters of Ni-Cr Self Lubricating Composites Produced Through Powder Metallurgy' (PhD), (External Examiner)
  3. (2020) Evaluator FRGS proposals - UPM, (Scientific Committee)
  4. (2020) Evaluator FRGS proposals - UM, (Scientific Committee)

SUPERVISION


Postgraduate Student
PhD/ Doctoral
  1. (2019) PREPARATION AND CHARACTERIZATION OF PARAFFIN/POLYMER COMPOSITES AS FORM-STABLE AND BIODEGRADABLE PHASE CHANGE MATERIALS (PCM) FOR THERMAL ENERGY STORAGE, ALUDIN BIN MOHD SERAH
  2. (2019) ADVANCED CERAMICS, KEE CHIA CHING
  3. (2008) Preparation and stability of nanofluids for heat transfer, Azadeh Ghadimi
  4. (2007) Modelling of cyclic multiaxial fatigue with plasticity, Shahram Shahrooi
  5. (2004) Preparation of cobalt-al2o3 nanocomposite by mechanical alloying, Yeo, Wee Sing
Master
  1. (2009) Preparation of mullite/ZrO2 functionally graded material, Zaid
  2. (2009) Preparation of mullite/ZrO2 functionally graded material, Ahmad
  3. (2009) Preparation of high-permeability ferrite layers by electrophoretic deposition, Hee Ay Ching (University of Malaya (UM))
  4. (2009) Preparation of Al2O3-SiC/ZrO2 functionally graded material, Esmail (University of Malaya (UM))
  5. (2008) Preparation of homogeneous composite by colloidal filtration, Hakimeh (University of Malaya (UM))
  6. (2008) Preparation of Al2O3/ZrO2 graded materials by electrophoretic deposition, Mehdi
  7. (2008) FEA of functionally graded ceramic, Mohamed Mehrali (University of Malaya (UM))
  8. (2002) Synthesis and characterization of MgCuZn ferrites by co-precipitation and mixed oxide route, Chin Chee Lung (University of Malaya (UM))
  9. (2002) Influence of composition on the electromagnetic properties of MgCuZn ferrites, Koay Mei Hyie (University of Malaya (UM))
  10. (2002) Effect of V2O5 addition on MgCuZn ferrite for multilayer chip application, Lai Mun Kou (University of Malaya (UM))
  11. (1999) The effect of, Maimunah Ismail (University of Malaya (UM))
Under Graduate Students
  1. (2022) Mechanical Engineering
  2. (2009) Final Year Research Project
  3. (2008) Final year research project
  4. (2007) Final year research project

TEACHING


Doctor Of Philosophy
  1. (2020) KVX8002 - Thesis
Master
  1. (2020) KMD7002 - Dissertation
  2. (2018) KQA7006 - Materials Characterization
  3. (2017) KQA7006 - Materials Characterization
Bachelor
  1. (2020) KIG2003 - Fluid Mechanics Ii
  2. (2020) KIG4046 - Materials Characterization
  3. (2020) KIG4046 - Materials Characterization
  4. (2020) KIX1003 - Thinking and Communication Skills
  5. (2019) KIG4046 - Materials Characterization
  6. (2019) KIX1003 - Thinking and Communication Skills
  7. (2019) KMEB4206 - Processing of Ceramics
  8. (2018) KMEB2110 - Basic Ceramics
  9. (2018) KMEB4206 - Processing of Ceramics
  10. (2018) KMEM2115 - Calculation and Numerical Method
  11. (2017) KMEB3119 - Non-Ferrous Alloys and Materials Selection
  12. (2017) KMEB4206 - Processing of Ceramics

SOCIAL RESPONSIBILITY ACTIVITIES


  • Judge for Intel-Isef Competition, (19 Sep 2011 - 22 Sep 2011)
  • Judge for Intel-Isef Competition Organised by Dept Kokurikulum, Kpm., (02 Dec 2010 - 04 Dec 2010)