Curriculum Vitae

DR. EDZROL NIZA BIN MOHAMAD

Senior Lecturer
  • Department of Mechanical Engineering
    Faculty of Engineering
  • edzrol
  • 0379675256

BIOGRAPHY

Dr. Edzrol Niza Mohamad is a senior lecturer in Department of Mechanical, Faculty of Engineering and member of Centre for Smart & Sustainable Manufacturing. He has a Bachelor’s Degree from Yamagata University, Japan and Master’s Degree from Kyoto Institute of Technology, Japan. He obtained his PhD from the Universiti Malaya, Malaysia. In 2006, he was invited as a Guest Scholar in the Department of Mechanical and Science, Kyoto University, Japan.

Research in Dr. Edzrol’s laboratory focuses on machine design and sustainable manufacturing particularly designing innovative mechanism in automotive world. In 2017, he had secured an FRGS grant with topic related to design and development of multi-nozzles electrospinning and successfully completed with all the targets delivered. He also had successfully led a project of working with PROTON BERHAD in 2018 to design and develop a modular approach of power window components for their current models.

AREAS OF EXPERTISE

  • NANO TECHNOLOGY SN: INCLUDING STANDARD SUPPORTING TECHNOLOGIES FOR NANO MACHINING
    Multi Nozzles Nano Fibres Filtration Waste Water
  • DESIGN ENGINEERING
    Electrospinning
  • GEAR DESIGN
    Gear Design, Machine and Mechanism Theory
  • DRIVETRAIN ENGINEERING
  • COMBUSTION AND FUEL ENGINEERING
  • MACHINE DESIGN
    Gear Dynamics, Mechanism and Machine Theory
  • MACHINE DESIGN
    Drivetrain Technology, Machine Design

ACADEMIC QUALIFICATION

  • PhD, (MACHINE DESIGN)
    Universiti Malaya (UM)
  • M. ENG, (KEJURUTERAAN MEKANIKAL (SISTEM))
    Kyoto Institute of Technology
  • B. ENG, (KEJURUTERAAN MEKANIKAL (SISTEM))
    Yamagata University, Japan

ADMINISTRATIVE DUTIES

  • Project Member
    01 Aug 2021 - 14 Jan 2024 (International)
  • Committee Members
    07 Sep 2020 - 08 Sep 2023 (University Malaya)

MEMBERSHIPS

  • INSTITUTION OF MECHANICAL ENGINEERS AND CHARTERED ENGINEER , MEMBER
    Since 2022 (International)
  • JAPANESE SOCIETY OF MECHANICAL ENGINEERS, STUDENT MEMBER
    Since 2002 (International)
  • INSTITUTE OF MECHANICAL ENGINEERS, CHARTERED ENGINEER
    2017 to 2018 (International)
  • BOARD OF ENGINEERS MALAYSIA, ACADEMIC MEMBER
    2011 to 2013 (National)

PUBLICATIONS

Article in Journal
WoS
  1. SalehHudin, H. S., Mohamad, N., Mahadi, W. N. L., & Afifi, A. M. (2021). Simulation and experimental study of parameters in multiple-nozzle electrospinning: Effects of nozzle arrangement on jet paths and fiber formation. Journal of Manufacturing Processes, 62, 440-449. doi: 10.1016/j.jmapro.2020.12.024
  2. Salleh, N. A. B., Afifi, A. M., Zuki, F. B. M., Sarih, N. M., Kalantari, K., & Mohamad, E. N. (2020). Studies on properties and adsorption ability of bilayer chitosan/PVA/PVDF electrospun nanofibrous. Desalination and Water Treatment, 206, 177-188. doi: 10.5004/dwt.2020.26279
  3. Mohamad, E. N., Komori, M., Murakami, H., Kubo, A., Fang, S. P. (2010). Effect of Convex Tooth Flank Form Deviation on the Characteristics of Transmission Error of Gears Considering Elastic Deformation, Journal of Mechanical Design. 132(10), Article
  4. Niza, M. E., Komori, M., Nomura, T., Yamaji, I., Nishiyama, N., Ishida, M., et al. (2010). Test rig for micro gear and experimental analysis on the meshing condition and failure characteristics of steel micro involute gear and metallic glass one, Mechanism and Machine Theory. 45(12), 1797-1812
  5. Taufiq, B. N., Masjuki, H. H., Mahlia, T. M. I., Saidur, R., Faizul, M. S., Mohamad, E. N. (2007). Second law analysis for optimal thermal design of radial fin geometry by convection, Applied Thermal Engineering. 27(8-9), 1363-1370
Scopus
  1. SalehHudin H.S., Mohamad E.N., Afifi A.M., Mahadi W.N.L.W. (2023). Simulation and experimental study of parameters in multiple-nozzle electrospinning: Effects of voltage and nozzle configuration on the electric field and electrospun jet attributes, Journal of Manufacturing Processes. 85, 544-555. doi:10.1016/j.jmapro.2022.11.051
  2. SalehHudin, H. S., Mohamad, E. N., Mahadi, W. N. L., & M. Afifi, A. (2021). Simulation and experimental study of parameters in multiple-nozzle electrospinning: Effects of nozzle arrangement on jet paths and fiber formation. Journal of Manufacturing Processes, 62, 440-449. doi: 10.1016/j.jmapro.2020.12.024
  3. Niza, M. E., Komori, M., Nomura, T., Yamaji, I., Nishiyama, N., Ishida, M., et al. (2010). Test rig for micro gear and experimental analysis on the meshing condition and failure characteristics of steel micro involute gear and metallic glass one, Mechanism and Machine Theory. 45(12), 1797-18120094114X
Others
  1. Syaza Ahmad Hashim, Kamyar Shameli, Fazreena Nadia Md Akhir, Madihah Md Salleh, Norliana Ismail, Noraryana Hassan, Hirofumi Hara, Edzrol Niza Mohamad, & Shaza Eva Mohamad. (2022). Identification of flavour chemicals and potentially harmful compounds in refill e-liquids sold in Malaysia. Journal of Advanced Research in Applied Sciences and Engineering Technology, 26(1), 15 22.
  2. Hanna S. SalehHudin, Edzrol N. Mohamad, Wan N. L. Mahadi, Amalina M. Afifi, Simulation and experimental study of parameters in multiple-nozzle electrospinning: Effects of nozzle arrangement on jet paths and fiber formation. Journal of Manufacturing Processes
  3. I.M. Mahbubul, R. Saidur, M.A. Amalina, M.E. Niza, 2016, Influence of ultrasonication duration on rheological properties of nanofluid: An experimental study with alumina water nanofluid, International Communications in Heat and Mass Transfer, Volume 76, August 2016, Pages 33 40
  4. Khuong, L. S., Zulkifli, N. W. M., Masjuki, H. H., Mohamad, E. N., Arslan, A., Mosarof, M. H., Azham, A. 2016. A review on the effect of bioethanol dilution on the properties and performance of automotive lubricants in gasoline engines Rsc Advances
  5. Navin Raja Kuppusamy, N.N.N. Ghazali, R. Saidur, M.E. Niza. 2015. Optimum design of triangular shaped micro mixer in micro channel heat sink, International Journal of Heat and Mass Transfer (91) : 52-62
  6. The prospects of biolubricants as alternatives in automotive applications HM Mobarak, E Niza Mohamad, HH Masjuki, MA Kalam, KAH Al Mahmud, M Habibullah, AM Ashraful
  7. Tribological properties of amorphous hydrogenated (a-C:H) and hydrogen- free tetrahedral (ta-C) diamond-like carbon coatings under jatropha biodegradable lubricating oil at different temperatures H.M. Mobarak, , , H.H. Masjuki, E. Niza Mohamad, , M.A. Kalam, H.K. Rashedul, M.M. Rashed, M. Habibullah
  8. R. Saidur, T.C Meng, Z. Said, M. Hasanuzzaman, A. Kamyar, Evaluation of the effect of nano-fluids based absorbers on direct solar collector, International Journal of Heat and Mass Transfer, 55 (21-22) (2012) pp. 5899-5907.
  9. International Journal of Mechanical Sciences
  10. Edzrol Niza MOHAMAD, Masaharu KOMORI*, Shigeki MATSUMURA, Chanat RATANASUMAWONG, Masanori YAMASHITA, Takushi NOMURA, Haruo HOUJOH and Aizoh KUBO, Effect of Variations in Tooth Flank Form Among Teeth on Gear Vibration and an Sensory Evaluation Method Using Potential Gear Noise, Journal of Advanced Mechanical Design, Systems, and Manufacturing, No.6 Vol.4, 1166-1181, (Release Date: October 8, 2010), (16 pages), doi:10.1299/jamdsm.4.1166
  11. Edzrol Niza Mohamad, Masaharu Komori*, Hiroaki Murakami, Aizoh Kubo, and Suping Fang, Effect of Convex Tooth Flank Form Deviation on the Characteristics of Transmission Error of Gears Considering Elastic Deformation, Journal of Mechanical Design, Vol. 132, Issue 10, 101005- 1--11, 2010-10, (11 pages), DOI: 10.1115/1.4002458.
  12. M.E.Niza, M.Komori*, T.Nomura, I.Yamaji, N.Nishiyama, M.Ishida, Y.Shimizu, Test rig for micro gear and experimental analysis on the meshing condition and failure characteristics of steel micro involute gear and metallic glass one, Mechanism and Machine Theory, Vol.45, 1797-1812, 2010-**(In Press)(Available online 15 September 2010), (16 pages), doi:10.1016/j.mechmachtheory.2010.08.008
  13. Edzrol Niza Mohamad, Masaharu Komori, Hiroaki Murakami, Aizoh Kubo, and Suping Fang, Analysis of General Characteristics of Transmission Error of Gears With Convex Modification of Tooth Flank Form Considering Elastic Deformation Under Load, Journal of Mechanical Design, Vol. 131, Issue 6, 061015, 2009-6, (9 pages), DOI:10.1115/1.3116261.
  14. B.N. Taufiq, H.H. Masjuki, T.M.I. Mahlia, M.S Faizul, R. Saidur, E. Niza Mohamad, Second law analysis for optimal thermal design of radial fin geometry by convection. Applied Thermal Engineering
  15. 小森雅晴・E.Niza MOHAMAD・野村拓史・山路伊和夫・西山信行・石田央・ 清水幸 春，マイクロギヤの損傷・強度評価試験装置の開発(試験装置の構想・ 構築と金属 ガラス製 マイクロギヤの評価) ，日本機械学会論文集（Ｃ 編）， 74巻742号，（2008年6月 ），pp.1601-1608．
  16. Moriwaki Ichiro, Mohamad Edzrol Niza, Tanaka Hiroaki & Bando Takeo 2001. Determination of Lapping Machine Settings for Hypoid Gears Using Artificial Intelligence (Gear Manufacturing). JSME International Conference on Motion and Power Transmissions I (01-202), 387-392.
  17. Moriwaki, I., Mohamad, E., and Kawasaki, Y., "Gear Noise Diagnosis System For Automobile Transmission Using Artificial Intelligence (Convergence of Training Process)," SAE Technical Paper 2001-01-3336, 2001, doi:10.4271/2001-01-3336.

RESEARCH PROJECT

National
  1. 2022 - 2025, Fundamental Research Grant Scheme (FRGS)
    Adsorption Mechanism Of Waste Cooking Oil On Chitosan Nonwoven Nanomembrane In Oily Wastewater ( Co-Researcher)
  2. 2019 - 2023, Fundamental Research Grant Scheme (FRGS)
    Controlling Corrosion Rate Of Biodiesel Fueled Engines Via Cyclic Regeneration Of Weak Base Within Diesel Engine Oil ( Co-Researcher)
International
  1. 2022 - 2023, International Funding
    Assessment Of Defective Valve In Reciprocating Compressor At Different Speeds And Discharge Pressure Using Acoustic Emission (ae) Technique ( Co-Researcher)

CONSULTANCY PROJECT

  • Functionality Test for Sahala Wudhu Station, University of Malaya
    01 Dec 2019 - 01 Dec 2020 (National)
  • Functionality Test for Sahala Wudhu Station, MEAS-TECH SOLUTIONS SDN BHD
    01 Dec 2019 - 01 Dec 2019 (National)

PAPER PRESENTED

POSTER PRESENTER
  1. Effect of gear dimensions on the fluctuation of rotational motion, Proceedings of the 4th International Conference on Positioning Technology (ICPT2010), Korea Advanced Institute of Science and Technology (International) (23 Nov 2011 - 25 Nov 2011)
PRESENTER
  1. Study of Multi-Nozzle Electrospinning Assembly, 4TH INTERNATIONAL NANOFIBER SYMPOSIUM DI TOKYO INSTITUTE OF TECHNOLOGY, OOKAYAMA CAMPUS, TOKYO, JAPAN (International) (16 Oct 2015 - 16 Oct 2015)
  2. Analysis Method of Tooth Meshing Condition and Motion of Gears, Proceedings of The Sixteenth International Symposium on Artificial Life and Robotics 2011, ALife Robotics, Japan (International) (16 Feb 2011 - 18 Feb 2011)
  3. Research on the Influencing Factor on the Motion of Gears, Proceedings of the 2010 International Conference on Advances in Mechanical Engineering (ICAME2010), UiTM, Malaysia (International) (01 Dec 2010 - 03 Dec 2010)
  4. Characteristics of Transmitting Motion of Gears and the Effect of Tooth Meshing Stiffness, Proceedings of the 2010 International Conference on Advances in Mechanical Engineering (ICAME2010), UiTM, Malaysia (International) (01 Dec 2010 - 03 Dec 2010)
  5. Effect of tooth meshing stiffness and tooth flank form on the motion of gears, Proceedings of the 2nd International Conference on Design Engineering and Science (ICDES2010), Tokyo University of Science (International) (17 Nov 2010 - 19 Nov 2010)

ACADEMIC/PROF. SERVICES

Evaluation
  1. (2019) Applied Surface Science., (Reviewer)
  2. (2019) Tribology International, (Reviewer)
  3. (2019) As Chairman for CONFIRMATION DEFENSE - SIVADAS A/L CHANDRA SEKARAN (KVA170074) - Fast Track Mode , (Advisory Committee)
  4. (2019) INTERNAL EXAMINERS FOR MAHDIEH ZAMZAMZADEH (KHA120037) - PhD , (Internal Examiner)
  5. (2019) PEMERIKSA DALAM LAPORAN PROJEK PENYELIDIKAN ~ ADAMU YUSUF ABDULLAHI (KQF170009) , (Internal Examiner)
  6. (2019) EXAMINATION OF MASTER OF ENGINEERING SCIENCE DISSERTATION - EKO DEPRIANTO (KGA120112) , (Internal Examiner)
  7. (2019) PELANTIKAN SEBAGAI PANEL UNTUK CANDIDATURE DEFENSE - ALIREZA ESMAEILZADEH (KHA150034), (Internal Examiner)
  8. (2016) to serve as technical consultant in a project called Design of A Generic Design Power Window System Using Modular Based System in tri-parte joint collaboration of UM, PROTON and Armstrong Auto Parts Sdn Bhd, (Consultant (Technical))
  9. (2016) Reviewing paper for conference and journal., (Reviewer)
Contribution to external organisation
  1. (2003) Developing Free-piston of Linear Generator for Hybrid Automobiles (Intensified Research Prioritized Area), Department of Mechanical, Faculty of Engineering, University of Malaya
Contribution to event
  1. (2024) Judge, International, (Panelist/Moderator)
  2. (2024) Chairperson, International, (Panelist/Moderator)

SUPERVISION

Postgraduate Student
PhD/ Doctoral
  1. (2023) Simulation and Experimental Study of Multi-Nozzle Arrangements on Electrospun Jets and their Resultant Nanofibrous Properties, HANNA SOFIA BINTI SALEH HUDIN
  2. (2016) AN EXPERIMENTAL INVESTIGATION OF THE MULTI-NOZZLE ELECTROSPINNING SETUP ON THE NANOFIBRE FORMATION, HANNA SOFIA SALEH HUDIN
  3. (2013) DESIGN AND KINEMATIC ANALYSIS OF AN INFINITELY VARIABLE TRANSMISSION (IVT) SYSTEM IN A SMALL SCALE VEHICLE, ANTHONY LEONG CHAN XENG
  4. (2012) DESIGN AND KINEMATIC ANALYSIS OF AN INFINITELY VARIABLE TRANSMISSION (IVT) SYSTEM IN A SMALL SCALE VEHICLE, ANTHONY LEONG CHAN XENG
Master
  1. (2024) Investigation of Double-Nozzle Electrospinning Designs on Fibre Formations, NOOR NAJYHA BINTI USTATI
  2. (2024) Research on Digital Design of Electric Vehicle Drive Axle, FAN XIANZHI
  3. (2016) EXPERIMENTAL STUDY AND IMPROVEMENT ON TRIBOLOGICAL BEHAVIORS OF AUTOMOTIVE LUBRICANTS WITH DILUTION OF VARIOUS GASOLINE-BIOETHANOL BLENDS, LEANG SO KHUONG
  4. (2015) The Optimization of Fuel Injection System in Diesel Engine Using Biodiesel" to "Experimental Study on Tribological Characteristics of Automotive Lubricants With Dilution of Various Gasoline-Bioethanol Blends, LEANG SO KHUONG
  5. (2014) EXPERIMENTAL STUDY OF TRIBOLOGICAL PROPERTIES OF DIAMOND-LIKE CARBON (DLC) COATING UNDER DIFFERENT BIO-LUBRICANTS OIL LUBRICATED CONDITIONS, MOBARAK HOSSAIN
  6. (2011) Numerical Simulation of Flows Around Bare and Helical Grooved Circular Cylinders, TRAN QUYET THANG

TEACHING

Master
  1. (2020) KQG7007 - Computer Aided Product Design and Development
Bachelor
  1. (2020) KIG2002 - Dynamics
  2. (2019) KXEX2245 - Vector Analysis
  3. (2013) KCEC1201 - Dynamics
  4. (2011) KCEP2112 - Machine Elements Design

SOCIAL RESPONSIBILITY ACTIVITIES

  • Committee Member for The Society for The Severely Mentally Handicapped Selangor & Federal Territrory, (01 Jan 2019 - 31 Dec 2019)
  • As a Video Add-On Developer for Open Source (Gpl) Software Media Player Called Kodi. Coding and Managing Personal Repository for The System., (01 Jan 2019 - 31 Dec 2019)