Curriculum Vitae

ASSOCIATE PROF. DR. BADRUL HISHAM BIN MOHAMAD JAN

Associate Professor
  • Department of Chemical Engineering
    Faculty of Engineering
  • badrules
  • +60379676869
  • 017-3399039

BIOGRAPHY

 

 

 

Badrul Mohamed Jan, SPE is currently an associate professor attached to the Department of Chemical Engineering, University of Malaya, Malaysia.  He holds a BS, MS and PhD degrees in petroleum engineering from New Mexico Institute of Mining and Technology, USA. He spent almost 10 years in the US and he had the opportunity to work in aworld class research center, Petroleum Recovery Research Centre in New Mexico Tech. He joined the Department of Chemical Engineering, UM as lecturer in 2004. 

 

The first project successfully executed is related to the use of Dolomite as alternative weighting agent to Barite in drilling fluids. The outcome of the research indicates a promising opportunity to use Dolomite instead of Barite in drilling fluids. Barite is toxic and expensive compared to dolomite, which can be acquired locally.

 

Dr. Jan first envisions is to develop and link any upstream oil and gas activity to his research. The major project that he accomplished was in the development of Super Light Weight Completion Fluid, (SLWCF) for 3M Asia Pacific. He managed to come out with a discreet formulation for new completion fluid with the use of glass bubbles from 3M. The formulated fluid has been tested in BKC 3 well at Bunga Raya field near Malaysia and Vietnam border. The field belongs to PETRONAS. The outcome of the field test showed nearly 1,000 barrels of additional oil could be produced daily if well is treated with SLWCF. The findings has been presented in SPE conference in Mexico and also published in the Journal of Drilling and Completion.

 

In addition Dr. Jan has also worked closely with BCI Chemical Sdn  Bhd, a local company mainly formulating and selling oil filed chemicals for various applications such as Enhanced Oil Recovery (EOR). Dr. Jan has successfully formulated a novel emulsifier, which is based on palm oil. About 15 ISI journal papers have published from the work.

 

Dr. Jan has also embarked in making use of industrial waste to improve production of hydrocarbon. In this effort, specific waste from industry has been characterized and extracted for its graphene content. Preliminary work and results indicates as much as 11% of graphene is able to be extracted. Current research is still on going to optimize the extraction process. In addition the extracted graphene will also be added into drilling fluid to investigate the rheological improvement resulting from the addition of the extracted graphene.

 

Dr Jan next research activities will mainly focus on the use of local dolomite in improving local water quality from a novel “Dolomite Water” system. This new niche area will open up new window of  opportunity for university research to be applied to industry and community.

 

 

 

 

AREAS OF EXPERTISE

  • MICRO EMULSION FOR ENHANCED OIL RECOVERY
    EOR, Micro emulsion
  • DRILLING AND COMPLETION FLUIDS TECHNOLOGY
    Drilling fluids, Completion Fluid, Perforation
  • FLUID MECHANICS

ACADEMIC QUALIFICATION

  • Ph.D, (Flow Characteristic of Gas Condensate Relative Permeability)
    New Mexico Institute of Mining & Technical, Usa
  • MSc., (3 Dimensional 2 Phases Reservoir Simulator for Coalbed Methane Reservoir)
    New Mexico Institute of Mining & Technical, Usa
  • BSc, (Kejuruteraan Petroleum)
    New Mexico Institute of Mining & Technical, Usa

ADMINISTRATIVE DUTIES

  • IChemE MEng level accreditation
    01 Jan 2023 - 31 Dec 2023 (Department)
  • Ahli Jawantan Kuasa Tapisan
    02 Jan 2023 - 31 Dec 2023 (Department)
  • Faculty Laison Education Chairman
    01 Jan 2023 - 31 Dec 2023 (International)
  • Fellow
    01 Jan 2023 - 31 Dec 2023 (University Malaya)
  • SPE KL Education Chairman
    01 Jan 2021 - 31 Dec 2023 (International)
  • Committee Members
    01 Jan 2023 - 30 Dec 2023 (University Malaya)
  • Coordinator
    01 Jan 2023 - 30 Dec 2023 (Department of Chemical Engineering, Faculty of Engineering)
  • Education Chairman -Liaison Officer
    01 Jan 2023 - 30 Dec 2023 (International)
  • SPE KL Liaison Officer
    01 Jan 2021 - 31 Oct 2023 (International)
  • Coordinator
    01 Jan 2019 - 31 Dec 2022 (Department of Chemical Engineering, Faculty of Engineering)
  • Faculty of Engineering - AJK HR Temuduga
    01 Jan 2021 - 31 Dec 2022 (Faculty)
  • SPE Mentor
    01 Jan 2021 - 31 Dec 2021 (International)
  • Coordinator
    01 Jan 2019 - 19 Dec 2020 (Department of Chemical Engineering, Faculty of Engineering)
  • Advisor to the Society of Petroleum Engineer (SPE), UM Student Chapter
    01 Jun 2015 - 01 Dec 2020 (International)
  • Wakil JIT Jabatan
    01 Sep 2018 - 01 Sep 2019 (Department of Chemical Engineering, Faculty of Engineering)
  • IChemE Accreditation Coordinator
    01 Jan 2014 - 30 Dec 2017 (University Malaya)
  • Head Coordinator
    01 Jun 2011 - 31 Jul 2017 (University Malaya)
  • UM ISO Auditor
    01 Jan 2015 - 31 Dec 2015 (University Malaya)
  • Advisor to CeUC, undergraduate CE club
    01 Jan 2005 - 31 Dec 2015 (Department of Chemical Engineering, Faculty of Engineering)
  • Acting Head of Department
    27 Nov 2014 - 28 Nov 2015 (Department of Chemical Engineering, Faculty of Engineering)
  • Acting Head of Department
    29 Dec 2014 - 31 Jan 2015 (Department of Chemical Engineering, Faculty of Engineering)
  • Students Competition Coordinator
    01 Jan 2014 - 31 Dec 2014 (Department of Chemical Engineering, Faculty of Engineering)
  • Acting Head of Department
    12 Nov 2014 - 14 Nov 2014 (Department of Chemical Engineering, Faculty of Engineering)
  • Deputy Director
    01 Sep 2013 - 31 Dec 2013 (UM Centre of Innovation & Commercialization (UMCIC), Deputy Vice-Chancellor (Research and Innovation))
  • Deputy Director
    01 Sep 2012 - 31 Aug 2013 (UM Centre of Innovation & Commercialization (UMCIC), Deputy Vice-Chancellor (Research and Innovation))
  • Deputy Director
    03 Oct 2011 - 31 Aug 2012 (UM Centre of Innovation & Commercialization (UMCIC), Deputy Vice-Chancellor (Research and Innovation))

MEMBERSHIPS

  • CENG, INSTITUTE OF ENGINEERING TECHNOLOGY, ACADEMIC MEMBER
    Since 2017 (International)
  • THE INSTITUTE OF ENGINEERING TECHNOLOGY IET, MEMBER
    Since 2016 (International)
  • SOCIETY OF PETROLEUM]M ENGINEERS - INTERNATIONAL, MEMBER
    Since 1993 (International)
  • SOCIETY OF PETROLEUM ENGINEERE, SPE, MEMBER
    Since 1992 (International)
  • ICHEME, ASSOCIATE MEMBER
    Since 2010 (International)
  • BOARD OF ENGINEERS MALAYSIA, MEMBER
     (National)

AWARD AND STEWARDSHIP

  • SPE Outstanding Academician Award 2021
    Society of Petroleum Engineer Kuala Lumpur section (SPE-KL), 2021 (National)
  • Outstanding Academician
    Society of Petroleum Engineers (SPE), 2021 (National)
  • CERTIFICATE OF EXCELLENT SERVICE
    University of Malaya, 2017 (University)
  • Distinguished Achievement Award for Petroleum Engineering Faculty
    Society of Petroleum Engineers (SPE), USA, 2016 (International)
  • Society of Petroleum Engineers (SPE) Faculty Enhancement Travel Grant program for the Northern Asia Pacific Region
    Society of Petroleum Engineers (SPE), USA, 2016 (International)
  • EXCELLENCE SERVICE AWARD
    University of Malaya, 2015 (University)
  • IENA International Trade Fair 2012 at Nuremberg Germany- Biopro Fertilizer
    IENA 2012, 2012 (International)
  • IENA International Trade Fair 2012 at Nuremberg Germany- Biopro Reverse Osmosis Water
    IENA 2012, 2012 (International)
  • ITEX 2012
    ITEX, 2012 (National)
  • Malaysia Technology Expo 2012
    MARS, 2012 (National)
  • EXCELLENCE SERVICE AWARD
    University of Malaya, 2010 (University)
  • CERTIFICATE OF EXCELLENT SERVICE
    University of Malaya, 2008 (University)

PUBLICATIONS

Article in Journal
WoS
  1. Balqis, Nuralmeera; Mohamed Jan, Badrul; Simon Cornelis Metselaar, Hendrik; Sidek, Akhmal; Kenanakis, George; Ikram, Rabia (2023). An Overview of Recycling Wastes into Graphene Derivatives Using Microwave Synthesis; Trends and Prospects, MATERIALS. 16(10). doi:10.3390/ma16103726
  2. Izzataddini, Arini; Romdoni, Yoga; Helmiyati; Marantika, Rika Novi; Amir, Zulhemi; Kadja, Grandprix T. M.; Jiwanti, Prastika K.; Khalil, Munawar; Jan, Badrul Mohamed (2023). Enhancement of visible light organic dyes photodegradation using TiO2 (001)/Graphene oxide nanocomposite, INORGANIC CHEMISTRY COMMUNICATIONS. 157. doi:10.1016/j.inoche.2023.111379
  3. Ahmad, W., Ahmad, Q., Yaseen, M., Ahmad, I., Hussain, F., Jan, B. M., . . . Kenanakis, G. (2021). Development of Waste Polystyrene-Based Copper Oxide/Reduced Graphene Oxide Composites and Their Mechanical, Electrical and Thermal Properties. Nanomaterials, 11(9), 16. doi: 10.3390/nano11092372
  4. Ahmad, W., Jabbar, B., Ahmad, I., Jan, B. M., Stylianakis, M. M., Kenanakis, G., & Ikram, R. (2021). Highly Sensitive Humidity Sensors Based on Polyethylene Oxide/CuO/Multi Walled Carbon Nanotubes Composite Nanofibers. Materials, 14(4), 18. doi: 10.3390/ma14041037
  5. Ahmad, W., Qaiser, S., Ullah, R., Jan, B. M., Karakassides, M. A., Salmas, C. E., . . . Ikram, R. (2021). Utilization of Tires Waste-Derived Magnetic-Activated Carbon for the Removal of Hexavalent Chromium from Wastewater. Materials, 14(1), 19. doi: 10.3390/ma14010034
  6. Ahmad, W., Rahman, A. U., Ahmad, I., Yaseen, M., Jan, B. M., Stylianakis, M. M., . . . Ikram, R. (2021). Oxidative Desulfurization of Petroleum Distillate Fractions Using Manganese Dioxide Supported on Magnetic Reduced Graphene Oxide as Catalyst. Nanomaterials, 11(1), 16. doi: 10.3390/nano11010203
  7. Boudouh, D., Ikram, R., Jan, B. M., Metselaar, H. S. C., Hamana, D., & Kenanakis, G. (2021). Synthesis, Characterization and Filtration Properties of Ecofriendly Fe3O4 Nanoparticles Derived from Olive Leaves Extract. Materials, 14(15), 16. doi: 10.3390/ma14154306
  8. Ikram, R., Jan, B. M., Sidek, A., & Kenanakis, G. (2021). Utilization of Eco-Friendly Waste Generated Nanomaterials in Water-Based Drilling Fluids; State of the Art Review. Materials, 14(15), 28. doi: 10.3390/ma14154171
  9. Kania, D., Yunus, R., Omar, R., Rashid, S. A., & Jan, B. M. (2021). Rheological investigation of synthetic-based drilling fluid containing non-ionic surfactant pentaerythritol ester using full factorial design. Colloids and Surfaces a-Physicochemical and Engineering Aspects, 625, 9. doi: 10.1016/j.colsurfa.2021.126700
  10. Kania, D., Yunus, R., Omar, R., Rashid, S. A., Jan, B. M., & Aulia, A. (2021). Adsorption of non-ionic surfactants on organoclays in drilling fluid investigated by molecular descriptors and Monte Carlo random walk simulations. Applied Surface Science, 538, 9. doi: 10.1016/j.apsusc.2020.148154
  11. Kania, D., Yunus, R., Omar, R., Rashid, S. A., Jan, B. M., & Aulia, A. (2021). Lubricity performance of non-ionic surfactants in high-solid drilling fluids: A perspective from quantum chemical calculations and filtration properties. Journal of Petroleum Science and Engineering, 207, 10. doi: 10.1016/j.petrol.2021.109162
  12. Khalil, M., Fahmi, A., Nizardo, N. M., Amir, Z., & Jan, B. M. (2021). Thermosensitive Core-Shell Fe3O4@poly(N-isopropylacrylamide) Nanogels for Enhanced Oil Recovery. Langmuir, 37(29), 8855-8865. doi: 10.1021/acs.langmuir.1c01271
  13. Amir, Z., Saaid, I. M., Jan, B. M., Khalil, M., Patah, M. F. A., & Bakar, W. Z. W. (2020). The retardation of polyacrylamide by ammonium chloride in high-salinity and high-temperature conditions: molecular analysis. Polymer Bulletin, 77(10), 5469-5487. doi: 10.1007/s00289-019-03023-3
  14. Carolyn, K. M. W., Junaidi, M. U. M., Hashim, N. A., Hussain, M. A., Zuki, F. M., Jan, B. M., . . . Ahmad, A. L. (2020). Purification of lake water using a PES hollow fiber membrane. Water Science and Technology-Water Supply, 20(2), 529-537. doi: 10.2166/ws.2019.184
  15. Ikram, R., Jan, B. M., & Ahmad, W. (2020). Advances in synthesis of graphene derivatives using industrial wastes precursors; prospects and challenges. Journal of Materials Research and Technology-Jmr&T, 9(6), 15924-15951. doi: 10.1016/j.jmrt.2020.11.043
  16. Ikram, R., Jan, B. M., & Ahmad, W. (2020). An overview of industrial scalable production of graphene oxide and analytical approaches for synthesis and characterization. Journal of Materials Research and Technology-Jmr&T, 9(5), 11587-11610. doi: 10.1016/j.jmrt.2020.08.050
  17. Ikram, R., Jan, B. M., Pervez, S. A., Papadakis, V. M., Ahmad, W., Bushra, R., . . . Ran, M. (2020). Recent Advancements of N-Doped Graphene for Rechargeable Batteries: A Review. Crystals, 10(12), 27. doi: 10.3390/cryst10121080
  18. Ikram, R., Jan, B. M., Vejpravova, J., Choudhary, M. I., & Chowdhury, Z. Z. (2020). Recent Advances of Graphene-Derived Nanocomposites in Water-Based Drilling Fluids. Nanomaterials, 10(10), 25. doi: 10.3390/nano10102004
  19. Khalil, M., Amanda, A., Yunarti, R. T., Jan, B. M., & Irawan, S. (2020). Synthesis and application of mesoporous silica nanoparticles as gas migration control additive in oil and gas cement. Journal of Petroleum Science and Engineering, 195, 9. doi: 10.1016/j.petrol.2020.107660
  20. Khalil, M., Pratama, R. I., Sujak, M., Garry, A., Djuhana, D., Umar, A., . . . Jan, B. M. (2020). Dependence of the photocatalytic reduction of bicarbonate to formic acid by Au-TiO2 on Au morphology and its plasmonic vibrational mode. Materials Chemistry and Physics, 249, 10. doi: 10.1016/j.matchemphys.2020.123018
  21. Mazari, S. A., Abro, R., Bhutto, A. W., Saeed, I. M., Ali, B. S., Jan, B. M., . . . Mubarak, N. M. (2020). Thermal degradation kinetics of morpholine for carbon dioxide capture. Journal of Environmental Chemical Engineering, 8(3), 10. doi: 10.1016/j.jece.2020.103814
  22. Razali, S. Z., Yunus, R., Rashid, S. A., Lim, H. N., Jan, B. M., Hamid, H. A. (2020). Process intensification of 2-ethylhexyl caprylate/caprate synthesis via a pulsed loop reactor: Multi-objective optimization. Chemical Engineering and Processing-Process Intensification, 149, 12. doi: 10.1016/j.cep.2020.107837
  23. Saeed, I. M., Mazari, S. A., Alaba, P., Ali, B. S., Jan, B. M., Basirun, W. J., . . . Mubarak, N. M. (2021). A review of gas chromatographic techniques for identification of aqueous amine degradation products in carbonated environments. Environmental Science and Pollution Research, 28(6), 6324-6348. doi: 10.1007/s11356-020-11753-5
  24. Amir, Z., Said, I. M., Jan, B. M. (2019). In situ organically cross-linked polymer gel for high-temperature reservoir conformance control: A review. Polymers for Advanced Technologies, 30(1), 13-39. doi:10.1002/pat.4455
  25. Khalil, M., Aulia, G., Budianto, E., Jan, B. M., Habib, S. H., Amir, Z., Patah, M. F. A. (2019). Surface-Functionalized Superparamagnetic Nanoparticles (SPNs) for Enhanced Oil Recovery: Effects of Surface Modifiers and Their Architectures. ACS Omega, 4(25), 21477-21486. doi: 10.1021/acsomega.9b03174
  26. Nurfahmi, Mofijur, M., Ong, H. C., Jan, B. M., Kusumo, F., Sebayang, A. H., . . . Rahman, S. M. A. (2019). Production Process and Optimization of Solid Bioethanol from Empty Fruit Bunches of Palm Oil Using Response Surface Methodology. Processes, 7(10), 16. doi:10.3390/pr7100715
  27. Saeed, I. M., Ali, B. S., Jan, B. M., Basirun, W. J., Mazari, S. A., Birima, I. A. O. (2019). Thermal degradation of diethanolamine at stripper condition for CO2 capture: Product types and reaction mechanisms. Chinese Journal of Chemical Engineering, 27(12), 2900-2908. doi: 10.1016/j.cjche.2018.09.017
  28. Noraini, M. Y., Ong, H. C., Badrul, M. J., Chong, W. T. (2014). A review on potential enzymatic reaction for biofuel production from algae, Renewable Sustainable Energy Reviews. 39, 24-34
  29. Jeirani, Z., Jan, B. M., Ali, B. S., Noor, I. M., See, C. H., Saphanuchart, W. (2013). Formulation and phase behavior study of a nonionic triglyceride microemulsion to increase hydrocarbon production, Industrial Crops and Products. 43, 15-24
  30. Khalil, M., Jan, B. M., Raman, A. A. A. (2013). A Tait-like Equation for Estimating the Density of Nontraditional Super Lightweight Completion Fluid at High Pressure and Temperature, Petroleum Science and Technology. 31(1), 44-50
Scopus
  1. Izzataddini A., Romdoni Y., Helmiyati, Novi Marantika R., Amir Z., Kadja G.T.M., Jiwanti P.K., Khalil M., Mohamed Jan B. (2023). Enhancement of visible light organic dyes photodegradation using TiO2 (001)/Graphene oxide nanocomposite, Inorganic Chemistry Communications. 157. doi:10.1016/j.inoche.2023.111379
Others
  1. Recycling waste sources into nanocomposites of graphene materials: Overview from an energy- focused perspective
  2. Ikram, R., Jan, B. M., & Vejpravova, J. (2021). Towards recent tendencies in drilling fluids: application of carbon-based nanomaterials. Journal of Materials Research and Technology, 15, 3733-3758.
  3. Ikram, R., Mohamed Jan, B., Abdul Qadir, M., Sidek, A., Stylianakis, M. M., & Kenanakis, G. (2021). Recent Advances in Chitin and Chitosan/Graphene-Based Bio-Nanocomposites for Energetic Applications. Polymers, 13(19), 3266.
  4. Ullah, R., Ahmad, W., Yaseen, M., Khan, M., Iqbal Khattak, M., Mohamed Jan, B., ... & Kenanakis, G. (2021). Fabrication of MNPs/rGO/PMMA Composite for the Removal of Hazardous Cr (VI) from Tannery Wastewater through Batch and Continuous Mode Adsorption. Materials, 14(22), 6923.
  5. Ahmad, W., Qaiser, S., Ullah, R., Mohamed Jan, B., Salmas, C. E., Kenanakis, G., & Ikram, R. (2020). Utilization of Tires Waste-Derived Magnetic-Activated Carbon for the Removal of Hexavalent Chromium from Wastewater. Materials, 14(1), 34.
  6. Badrul Mohamed Jan, Drilling and Completion-Technology Focus, Journal of Petroleum Technology, Society of Petroleum Technlogy, 72(11), 25-27
  7. Highly Sensitive Humidity Sensors based on Polyethylene Oxide/CuO/Multi Walled Carbon Nanotubes Composite Nanofibers
  8. Kania, D., Yunus, R., Omar, R., Rashid, S. A., Jan, B. M., & Aulia, A. Adsorption of non-ionic surfactants on organoclays in drilling fluid investigated by molecular descriptors and Monte Carlo random walk simulations. Applied Surface Science, 538, 148154.
  9. Munawar Khalil, Reza Imam Pratama, Muhammad Sujak, Alexander Garry, Dede Djuhana, Aminah Umar, Chin Wei Lai, Badrul Mohamed Jan, "Dependence of the photocatalytic reduction of bicarbonate to formic acid by Au TiO2 on Au morphology and its plasmonic vibrational mode", Materials Chemistry and Physics, Elsevier,123018.
  10. Oxidative Desulfurization of Petroleum Distillate Fractions using Manganese Dioxide-supported Magnetic Reduced Graphene Oxide as Catalyst
  11. S.Z. Razalia, R. Yunusa,b,*, Suraya Abdul Rashida,b, Hong Ngee Lima,c, B. Mohamad Jand, H.A. Hamide, "Process intensification of 2-ethylhexyl caprylate/caprate synthesis via a pulsed loop reactor: Multi-objective optimization", Chemical Engineering & Processing, 149, (2020), 107837
  12. Shakoor, A., Ahmed, M., Ikram, R., Hussain, S., Tahir, A., Jan, B. M., & Adnan, A. (2020). Stability-indicating RP-HPLC method for simultaneous determination of metformin hydrochloride and vildagliptin in tablet and biological samples. Acta Chromatographica, 32(1), 39-43.
  13. A.H.M. Muhayyidina, N.F. Abu Bakara*, A. Saukia, N. A. Ghazalia, B. M. Janb, W.A. Ibrahimc, F. Md Naimid, "Rheological and Filtration Performances of Rhizophora mucronata Tannin Water-Based Drilling Fluid", Material Today, 17 (2019) 768 777
  14. Badrul Mohamed Jan, Drilling & Completion Fluids, Journal of Petroleum Technology, Society of Petroleum Technology, 01 November 2019
  15. K. M. W. Carolyn, M. U. M. Junaidi, N. A. Hashim, M. A. Hussain, Q1 F. Mohamed Zuki, B. Mohamed Jan, N. A. Abdul Nasir and A. L. Ahmad, "Water purification from lake water source using PES hollow fiber membrane", Waater Supply, In Press.
  16. Molecular analysis on retardation on polyacrylamide in high salinity and high temperature conditions
  17. Zulhelmi Amir, Ismail M. Said, B. Mohamed Jan, In situ organically cross linked polymer gel for high temperature reservoir conformance control: A review , Polymer for Advanced Technologies, 30(1) 2019, 13-39.
  18. Zulhelmi Amir, Ismail Mohd Saaid, Badrul Mohamed Jan, Munawar Khalil4 Muhamad Fazly Abdul Patah and Wan Zairani Wan Bakar, "The retardation of polyacrylamide by ammonium chloride in high salinity and high temperature conditions: molecular analysis", Polymer Bulletin,
  19. Badrul Mohamed Jan, Drilling and Completion Fluids, Journal of Petroleum Technology, Society of Petroleum Engineers,
  20. Dina Kania, Robiah Yunus, Rozita Omar, Suraya Abdul Rashid, Badrul Mohamed Jan, Niloofar Arsanjani, "Nonionic polyol esters as thinner and lubricity enhancer for synthetic-based drilling fluids", Journal of Molecular Liquids, 15(30) 2018, 5-13.
  21. Idris Mohamed Saeed, Brahim Si Ali, Badrul Mohamed Jan, Wan Jefrey Basirun, Shaukat Ali Mazari, Ibrahim Ali Obid Birima , Thermal degradation of diethanolamine at stripper condition for CO2 capture; product types and reaction mechanism. Cjche (2018), doi:10.1016/j.cjche.2018.09.017
  22. S.Z. Razalia, R. Yunusa,b, Suraya Abdul Rashida,b, H.N. Limc,d, B. Mohamed Jane, "Review of biodegradable synthetic-based drilling fluid: Progression, Performance and Future Prospect, Renewable and Sustainable Energy Reviews, 90, (2018) 171-186
  23. Zulhelmi Amir, Ismail M. Saaid and Badrul
  24. Zulhelmi Amir, Ismail S. Said and B. Mohamed Jane, "In situ organically cross linked polymer gel for high temperature reservoir conformance control: A review", Polymer Advanced Technology, 90, (2018) 1-27.
  25. 52.Badrul, M. Jan, Technology Focus: Drilling and Completion Fluids , Journal of Petroleum Technology, 69 (11) (2017), 74-74.
  26. Dina Kania, Robiah Yunus, Rozita Omar, Suraya Abdul Rashid and Badrul Mohamed Jan, Performance Evaluation of Polyol Ester Palm Oil as a Lubricant for Bentonite Suspension Drilling Fluid , Tribology Online, 12, 05, (2017) 253-256.
  27. Idris Mohamed Saeed, Vannajan Sanghiran Lee, Shaukat Ali Mazari, Wan Jeffery Basirun, Brahim Si Ali, Anam Asghar, Lubna Ghalib and Badrul Mohamed Jan, "Thermal degradation of aqueous 2-aminoethylethanolamine in CO2 capture; identification of degradation products, reaction mechanisms and computational studies",
  28. M. Nasser, M. Azlan Husien, Badrul, M. Jan, Bawadia Abdullah, Online Composition Prediction of a Debutanizer Column Using Artificial Neural Network , Iran. J. Chem. Eng., 36, 2, (2017) 153-175.
  29. Munawar Khalil, Badrul Mohamed Jan, Chong W Thong and Ali Berawi, "Advanced Nanomaterials in Oil and Gas Industry: Design, Application and Challenges", Applied Energy, 191 (2017) 287-310.
  30. Amir, Z., Jan, B.M., Wahab, A.K.A., Khalil, M., Ali, B.S., Tong, C.W. Viscosity of Saraline-based super lightweight completion fluid at high pressure and temperature: a statistical modeling approach Petrol. Explor. Develop. In Press
  31. Badrul Mohamed Jan, Drilling and Completion Fluid
  32. HC Ong, Badrul, M. Jan, CW Tong, H Fauzi, WH Chen, Effect of Organosolv Pretreatment and Acid Hydrolysis on Palm Empty Fruit Bunch (FEFB) as Bioethanol Feedstock , Biomass and Bioenergy, 95, (2016), 78-83.
  33. Idris Mohamed Saeed, Shaukat Ali Mazari, B. Si Ali,Badrul Hisham Mohd Jan. Thermal degradation of aqueous 2-aminoethylethanolamine in CO2 capture; identification of degradation products, reaction mechanisms and computational studies. Central Chemistry Journal, (2016).
  34. M. Nasser, M. Azlan Husien, Badrul, M. Jan, Multivariable Control of a Debutanizer Column using Equation Based Artificial Neural Network Model Inverse Control Strategies , Neurocomputing, 194 (2016), 135-150.
  35. Nordiyana M. S., Khalil Munawar, Badrul, M. Jan, Brahim S. Ali and W. T. Chong, Formation and Phase Behavior of Winsor Type III Jatropha curcas-based Microemulsion System , Journal of Surfactant and Detergents, DOI 10.1007/s11743-016-1814-y, (2016).
  36. S Shrestha, BS Ali, Badrul, M. Jan, MT Lim, K El Sheikh, Hydrodynamic Properties of A Cold Model Fluidized bed Gasifier: A Modeling and Experimental Investigation , Chemical Engineering Research and Design, 109, (2016) 791-805.
  37. S. A. Mazari, B. S. Ali and Badrul M. Jan. Thermal degradation of Piperazine and Diethanolamine blend for CO2 capture. International Journal of Greenhouse Gas Control. 47C (2016): 1-7.
  38. Amir, Z., Jan, B.M., Wahab, A.K.A., Khalil, M., Tong, C.W., Hassan, Z. (2015) Prediction of Sarline-based super light weight completion fluid densities at elevated pressures and temperatures J. Petrol. Sci. Eng. 135: 645-651.
  39. An overview of solvent management and emissions of amine-based CO 2 capture technology. SA Mazari, BS Ali, BM Jan, IM Saeed, S Nizamuddin: International Journal of Greenhouse Gas Control 34, 129-140
  40. Badrul Mohamed Jan. 2015. Drilling and Completion Fluid. Journal of Petroleum Technology, SPE
  41. Dina Kania, Robiah Yunus, Rozita Omar, Suraya Abdul Rashid and Badrul Mohamed Jan, A Review of Biolubricants in Drilling Fluids: Recent Research, Performance, and Applications, Journal of Petroleum Science and Engineering, 135 (2015) 177-184.
  42. Lim Symm Neea, Munawar Khalil, Badrul Mohamed Jan, Brahim Si Ali. 2015. Lightweight biopolymer drilling fluid for underbalanced drilling: An optimization study. Journal of Petroleum Science and Engineering 129 (2015) 178-188.
  43. N.M.Soffian, Z.Jeirani, B. Mohamed Jan, Brahim S. Ali. 2015. Jatropha Based Microemulsion Efficiency Screening Study for Enhanced Oil Recovery, Australian Journal of Basic and Applied Sciences, 9(8) Special 2015, Pages: 118-125
  44. Shrestha Siddhartha, Brahim Si Ali, Badrul M Jan, Mahar Diana, Khalid El Sheikh, Hydrodynamic characteristics in cold model of dual fluidized bed gasifiers, Powder Technology, 286, 246-256.
  45. Zulhelmi Amir, Badrul Mohamed Jan, Munawar Khalil, Ahmad Khairi Abdul Wahab, Zulkafli Hassan. 2015. Rheological behavior and temperature dependency study of Saraline-based super lightweight completion fluid. Journal of Petroleum Science and Engineering 130:106-113
  46. Lim Symm N., Mohamed Jan, B., Si Ali, B. and I. Mohd Noor, The Effects of Glass Bubbles, Clay, Xanthan Gum and Starch Concentrations on the Density of Lightweight Biopolymer Drilling Fluid, Applied Mechanic and Materials Vol. 625 (2014) 526-529.
  47. M. Nasser, M. Azlan Husien, Mohamed Jan, B., Harun. Charkrabati, Composition Prediction of a Debtanizer Column using Equation Based Artificial Neural Network Model, Neurocomputing, 131 (2014) 59-76.
  48. SA Mazari, B. S. Ali, Badrul, M. Jan, IM Saeed, Degradation study of piperazine, its blends and structural analogs for CO2 capture: A review , International Journal of Greenhouse Gas Control 31, (2014), 214-228.
  49. Z. Jeirani , B. Mohamed Jan , B. Si Ali , C. H. See & W. Saphanuchart (2014) In Situ Prepared Microemulsion-polymer Flooding in Enhanced Oil Recovery A Review, Petroleum Science and Technology, 32:2, 240-251, DOI: 10.1080/10916466.2011.588644
  50. Z. Jeirani , B. Mohamed Jan , B. Si Ali , C. H. See & W. Saphanuchart (2014) Pre-prepared Microemulsion Flooding in Enhanced Oil Recovery: A Review, Petroleum Science and Technology, 32:2, 180-193, DOI: 10.1080/10916466.2011.586968
  51. Jeirani, Z., Mohamed Jan, B., Si Ali, B., Noor, I.M., See, C.H. and W. Saphanuchart, "The Effect of Polymer on Triglyceride Microemulsion Formulation for Tertiary Oil Recovery", Industrial & Engineering Chemistry Research, 52(44) (2013), 15589-15593
  52. Jeirani, Z., Mohamed Jan, B., Si Ali, B., Noor, I.M., See, C.H. and W. Saphanuchart, Formulation, optimization and application of triglyceride microemulsion in enhanced oil recovery, Industrial Crops and Products, 43 (2013) 6-14.
  53. Jeirani, Z., Mohamed Jan, B., Si Ali, B., Noor, I.M., See, C.H. and W. Saphanuchart, Prediction of Phase Inversion Temperature of a Triglyceride Microemulsion using Design of Experiments, Industrial & Engineering Chemistry Research, 52 (2013) 744-750.
  54. Jeirani, Z., Mohamed Jan, B., Si Ali, B., Noor, I.M., See, C.H. and W. Saphanuchart, Prediction of water and oil percolation thresholds of a microemulsion by modeling of dynamic viscosity using Response Surface Methodology, Journal of Industrial and Engineering Chemistry, 19 (2013) 554-560.
  55. Khalil, M., Badrul, M. Jan., Aziz, A.R. 2013. Tait-like equation for estimating the density of nontraditional super lightweight completion fluid at high pressure and temperature. Petroleum Science and Technology, 31, 44-50.
  56. Z. Jeirani, B. Mohamed Jan, B. Si Ali, I.M. Noor, C.H. See, W. Saphanuchart, Correlations between interfacial tension and cumulative tertiary oil recovery in a triglyceride microemulsion flooding, Journal of Industrial and Engineering Chemistry, Volume 19, Issue 4, 25 July 2013, Pages 1310-1314
  57. Z. Jeirani, B. Mohamed Jan, B. Si Ali, I.M. Noor, C.H. See, W. Saphanuchart, Prediction of the optimum aqueous phase composition of a triglyceride microemulsion using response surface methodology, Journal of Industrial and Engineering Chemistry, Volume 19, Issue 4, 25 July 2013, Pages 1304-1309
  58. Jeirani, Z., Mohamed Jan, B., Si Ali, B., Noor, I.M., See, C.H. and W. Saphanuchart, Prediction of water and oil percolation thresholds of a microemulsion by modeling of dynamic viscosity using Design og Experiments, Journal of Industrial and Engineering Chemistry
  59. Jeirani, Z., Mohamed Jan, B., Si Ali, B., Noor, I.M., See, C.H. and W. Saphanuchart, The optimal Mixture Design of Experiments: Alternative Method in Optimizing the Aqueous Phase Composition of a Microemulsion, Chemometrics and Intelligent Laboratory Systems, 112 (2012), 1-7.
  60. Jeirani, Z., Yusuf, M.M., Jan, B.M. and A.A.A. Raman, Rheological Study of Saraline-Based Super Light Weight Completion Fluid in Underbalanced Perforation, Oil Gas European Magazine, 38 (2012), 18-21.
  61. Khalil, M. Badrul, M. Jan. 2012. Viscoplastic modelling of a novel lightweight biopolymer drilling fluid for underbalanced drilling. Industrial & Engineering Chemistry Research. 51, 4056-4068.
  62. M. Khalil, B. M. Jan & A. A. A. Raman 2012. The Viscosity of Nontraditional Lightweight Completion Fluid at Elevated Temperature and Pressure. Petroleum Science and Technology 30(18):1939-1945
  63. Munawar Khalil and Badrul Mohamed Jan, Viscoplastic Modeling of a Novel Lightweight Biopolymer Drilling Fluid for Underbalanced Drilling, dx.doi.org/10.1021/ie200811z | Ind. Eng. Chem. Res. 2012, 51, 4056 4068
  64. Badrul Hisham Mohamad Jan & Abdul Aziz Abdul Raman. 2011. Production of Superlight Saraline Drill-in Fluid. Chemistry and Technology of Fuels and Oil 46(6): 401-404.
  65. Khalil, M., Badrul, M. Jan., Aziz, A.R. 2011. Preparation of a nontraditional ultralight fluid for increasing oil production using ground, natural, ground, and acid-activated clay. Chemistry and Technology of Fuels and Oil. 46, 394-402.
  66. Khalil, M., Badrul, M. Jan., Aziz, A.R. 2011. Rheological and statistical evaluation of nontraditional lightweight completion fluid and its dependence on temperature. Journal of Petroleum Science and Engineering. 77, 27-33.
  67. Khalil M, Jan BM, Raman AA (2010) Application of Natural Clay to Formulate Nontraditional Completion Fluid that Triples Oil Productivity. World Academy of Science, Engineering and Technology, International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering 4: 315-20
  68. Mohammad Khalil, Badrul Hisham Mohamad Jan & Abdul Aziz Abdul Raman. 2010. Fractional Factorial Design Optimization of Nontraditional Completion Fluid for Perforation with Underbalance. Chemistry and Technology of Fuels and Oils 46(5): 340-350.
  69. Jan, B.M., Rae, G.R., Noor, M.I., Suhadi, A.N., and Devadaas, M. 2009. Increasing Production by Maximizing Underbalance During Perforation Using Nontraditional Lightweight Completion Fluid. SPE Drill & Compl 24 (2): 226-331. SPE-108423-PA. doi: 10.2118/108423-PA.
  70. Khalil, M., Badrul, M. Jan. 2009. Optimization of super light weight completion fluid using fractional factorial design. Jurnal Teknologi Minyak dan Gas Bumi (Journal of Oil and Natural Gas Technology), Edisi 2, pp. 40 48.3
  71. M.J. Badrul, L.L. Chiou, Z. Azlina, Z. Juliana, 2007. Dolomite as an alternating weighting agent in drilling fluids. Journal of Engineering Science & Technology 2(2):165-176
Chapter in Books
  1. Erfan Mohammadian, Badrul Mohamed Jan, Amin Azdarpour, Hossein Hamidi, Nur Hidayati Binti Othman, Aqilah Dollah, Siti Nurliyana Binti Che Mohamed Hussein and Rozana Azrina Binti SazaliCO2-EOR/Sequestration: Current Trends and Future Horizons, "Enhanced Recovery Processes - New Technologies, CO2-EOR/Sequestration: Current Trends and Future Horizons", 125-148, InTEch Open.
Article in Proceeding
  1. A.H.M. Muhayyidina, N.F. Abu Bakara, A. Saukia, N. A. Ghazalia, B. M. Janb, W.A. Ibrahimc, F. Md Naimid, "Rheological and Filtration Performances of Rhizophora mucronata Tannin Water-Based Drilling Fluid", 6th International Conference on Recent Advances in Materials, Minerals & Environment (RAMM)
  2. Putri Humairah Monashofian Putra, Badrul Mohamed Jan, Mohamad Fazly Abdul Patah and Mohd Usman Mohd Junaidi, "Effect of temperature and concentration of industrial waste graphene on rheological properties of water based mud", Regional Conference in Chemical Engineering (RSCE), Armada Hotel, 30-31 October 2019.
  3. Z. Amir, I. M. Said, B. M. Jan, and M. Khalil, "Molecular analysis on retardation on polyacrylamide in high salinity and high temperature conditions",
  4. Lim Symm Nee, Munawar Khalil, Badrul Mohamed Jan, Brahim Si Ali, Novel Lightweight Biopolymer Drilling Fluid for Underbalanced Drilling, OTC-26376, Offshore Technology Conference (OTC) Asia, Kuala Lumpur, Malaysia, 22-25 March 2016.
  5. Zulhelmi Amir, Badrul Mohamed Jan, Ahmad Khairi Abdul Wahab, Munawar Khalil and Chong Wen Tong, OTC-26399, Rheology and Temperature Dependency Study of Saraline-Based Super Lightweight Completion Fluid, Offshore Technology Conference (OTC) Asia, Kuala Lumpur, Malaysia, 22-25 March 2016.
  6. Zulhelmi Amir, Badrul Mohamed Jan, Ahmad Khairi Abdul Wahab, Munawar Khalil and Chong Wen Tong, SPE-180619, "Rheology and Density Prediction of Super Lightweight Completion Fluid (SLWCF) at Reservoir Conditions", IADC/SPE Asia Pacific Drilling Technology Conference, Singapore, 22 24 August, 2016.
  7. Jeirani, Z., Mohamed Jan, B., Si Ali, B., Noor, I.M., See, C.H. and W. Saphanuchart, A novel effective triglyceride microemulsion for chemical flooding. Paper SPE 158301 presented at the SPE Asia Pacific Oil and gas Conference and Exhibition, Perth, Australia, 22-24 Oct. 2012.
  8. See Chun Hwa, Wasan, Saphanuchart, Zahra Jeorani, Badul Mohamed Jan, Brahim Si Ali and Ishenny Mohd NANOEMULSION TECHNOLOGY - LET S THE NATURE DO THE WORK , AunSeed Net 4th Regional Conference on Chemical Engineering, Petaling Jaya, Selangor February 9-10, 2012.
  9. Khalil, M., Badrul, M.J., Aziz, A.R. 2011. The effect of clay as homogenizing agent in non-traditional super light weight completion fluid for underbalance perforation. Proceeding in: 3rd Regional Conference on Chemical Engineering, 20-21 January 2011, Manila, Philippines.
  10. Z. Jeirani, B. Mohamed Jan, B. Si Ali, C.H. See, and W. Saphanuchart, The effect of temperature, salinity, and concentration of polymer solution on the apparent viscosity of xanthan gum solution, 32nd Australian Polymer Symposium, Coffs Harbour, NSW, Australia, 13-16 Feb. 2011.
  11. Khalil, M., Badrul, M.J., Aziz, A.R. 2010. Flow properties of super light weight completion fluid for perforation cleanup during underbalance condition. Proceeding in: SPE/IADC Managed Pressure Drilling and Underbalanced Operation Conference and Exhibition, 24-25 February 2010, Kuala Lumpur, Malaysia.
  12. Khalil, M., Badrul, M.J., Aziz, A.R. 2010. High pressure high temperature density of nontraditional super lightweight completion fluid for underbalance perforation. Proceeding in: 2nd Onshore Technology Asia Conference 2010, 15-16 November 2010, Jakarta, Indonesia.
  13. M. Khalil, Badrul M. Jan, A.A. Rahman. 2010. Application of Natural Clay to Formulate Non-Traditional Completion Fluid that Triples Oil Productivity, Proceeding of International Conference on Applied Chemistry and Chemical Engineering.
  14. Rheological and statistical evaluation of nontraditional lightweight completion fluids and its dependence on temperature, 5th Regional Conference on Chemical Engineering
  15. Khalil, M., Badrul, M.J., Aziz, A.R. 2009. Rheological properties of super light weight completion fluid for perforation with underbalance. Proceeding in: National Symposium of IATMI (Society of Indonesian Petroleum Engineers), 2-5 December 2009, Bandung, Indonesia.
  16. Khalil, M., Badrul, M.J., Aziz, A.R. 2009. The effect of clay in the formulation of nontraditional completion fluid for underbalance perforation. Proceeding in: Chemeca 2009 Conference, 27-20 September 2009, Perth, Australia.
  17. Munawar Khalil & Badrul Mohamed Jan. 2008. Optimization of Super Light Weight Completion Fluids using Fractional Factorial Design. Proceeding of 10th Congress of AITMI and National Symposium.
  18. Munawar Khalil & Badrul Mohamed Jan. 2008. Super Light Weight Completion Fluid Formulation from Non-Damaging Material. Proceeding on 2nd Engineering Conference on Sustainable Engineering, Infrastructure Development & Management.

RESEARCH INTEREST

  • Core Flooding Analysis
  • Enhanced Oil Recovery
  • Superlight Weight Drilling Fluids
  • Super Light Weight Completion Fluids

RESEARCH PROJECT

National
  1. 2023 - 2025, Bantuan Khas Penyelidikan (BKP Special)
    Revolutionizing Solar Energy Storage: A Novel, Sustainable, and More Efficient Device ( Co-Researcher)
  2. 2023 - 2025, Partnership Grant
    Optimizing Critical Milestones: Prototype Fabrication and Lab Testing of Offshore CAWT ( Co-Researcher)
  3. 2019 - 2023, Fundamental Research Grant Scheme (FRGS)
    Optimization And Mechanism Studies Of Leaching And Hummer's Method During Graphene Synthesis From Unwanted Industrial Waste As A Potential Alternative For Commercial Graphene Catalyst ( Co-Researcher)
  4. 2019 - 2023, International Funding
    Characterization, Extraction And Application Of Graphene From Unwanted Industrial Waste In Water Based Mud (wbm) And Ester Based Mud (ebm) Drilling Fluids ( Principal Investigator(PI))
  5. 2020 - 2023, RU Geran - Fakulti Program
    Study On The Effect Of Higher Operating Temperature For Alkaline Electrolyser On System Efficiency, Over Potential And Power Ratio ( Principal Investigator(PI))
  6. 2021 - 2023, Geran Penyelidikan Universiti Malaya (UMRG)
    Unlocking the Potential of Dolomite for Sustainable Wastewater Treatment and Higher Quality Drinking Water Production ( Principal Investigator(PI))
  7. 2019 - 2021, Fundamental Research Grant Scheme (FRGS)
    Synthesis Of Magnetic Graphene-based Amphiphilic Janus Nanosheets From Unwanted Electrode Waste As Photocatalyst For The Removal Of Persistent Organic Pollutants (pops) ( Principal Investigator(PI))
  8. 2019 - 2021, Fundamental Research Grant Scheme (FRGS)
    Optimization and mechanism studies of leaching and Hummer's Method during graphene synthesis from unwanted industrial waste as a potential alternative for commercial graphene catalyst ( Consultant)
  9. 2018 - 2020, Geran Penyelidikan Universiti Malaya (UMRG)
    Chracterization, Extraction and Application of Graphene from Unwanted Industrial Waste in Water Based Mud and Ester Based Mud ( Principal Investigator(PI))
  10. 2015 - 2018, Geran Penyelidikan Universiti Malaya (UMRG)
    Enhanced Oil Recovery (eor) Via Wettability Alteration Of Reservoir Rocks Using Superparamgnetic-based Nanofluids ( Principal Investigator(PI))
  11. 2015 - 2018, Fundamental Research Grant Scheme (FRGS)
    Development of hybrid observer and model predictive control in a polymerization plant ( Consultant)
  12. 2013 - 2015, Geran Penyelidikan Universiti Malaya (UMRG)
    Improving The Formulation and Efficiency of Triglyceride Microemulsion Flooding ( Principal Investigator(PI))
  13. 2008 - 2010, ScienceFund
    Development of Super Light Weight Completion Fluid for Increasing Hydrocarbon Flow ( Principal Investigator(PI))
  14. 2008 - 2009, Short Term Research Fund (Vote F)(PJP)
    Application of Emulsifier for Low Density Completion Fluids ( Principal Investigator(PI))
Private
  1. 2022 - 2025, Private Funding
    Wind Turbine - Novel Floating Cross Axis Augmentation Wind Turbine (cawt) For Offshore Application ( Co-Researcher)
International
  1. 2019 - 2022, International Funding
    Characterization, Extraction and Formulation of Graphene from Unwanted Industrial Waste in Water Based Mud and Ester Based Mud ( Principal Investigator(PI))
University
  1. 2023 - 2024, University Grant
    Development Of Industrial Waste-derived Graphene Derivatives And Their Effects In Drilling Fluids & Biological Applications ( Principal Investigator(PI))

CONSULTANCY PROJECT

  • Graphene Based Drilling Fluids, Demeter Oil and Gas Sdn Bhd
    01 Jan 2020 - 01 Jan 2023 (National)

PAPER PRESENTED

INVITED SPEAKER
  1. The Upstream Oil and Gas Industry, UM Society of Petroleum Engineer Sharing Session, UM Society of Petroleum Engineers Student Chapter (National) (14 Nov 2018 - 14 Nov 2018)
  2. Applications of Advanced Nanomaterial in the Upstream Oil and Gas Industry, The 4th International Symposium on Current Progress in Mathematics & Sciences 1018 (4th ISCPMS 2018), University of Indonesia (International) (30 Oct 2018 - 31 Oct 2018)
  3. Intelectual Property and Commercialization, Kursus Kepimpinan Untuk  (National) (17 Apr 2012)
ORAL PRESENTER
  1. Density and Viscosity Prediction of Super Lightweight Completion Fluid (SLWCF) at Reservoir Conditions, SPE Asia Pacific Drilling Technology Conference and Exhibition, International Association of Drilling Contractor (IADC) and Society of Petroleum Engineers (SPE) (International) (22 Aug 2016 - 24 Aug 2016)
  2. Novel Lightweight Biopolymer Drilling Fluid for Underbalanced Drilling, Offshore Technology Conference Asia 2016, Society of Petroleum Engineers (International) (22 Mar 2016 - 25 Mar 2016)
  3. Rheology and Temperature Dependency Study of Saraline-Based Super Lightweight Completion Fluid, Offshore Technology Conference Asia 2016, Society of Petroleum Engineers (International) (22 Mar 2016 - 25 Mar 2016)
  4. The Effects of Glass Bubbles, Clay, Xanthan Gum and Starch Concentrations on the Density of Lightweight Biopolymer Drilling Fluid , 3rd International Conference on Integrated Petroleum Engineering and Geosciences 2014 (ICIPEG2014), UTP (International) (03 Jun 2014 - 04 Jun 2014)
  5. Hybrid modeling neural network for composition and temperature, 4th International Conference on Chemical & Bioprocess Engineering 2012 (ICCBPE 2012) in conjunction with 26th Symposium of Malaysian Chemical Engineers 2012 (SOMChE 2012), IChemE Malaysia (International) (21 Nov 2012 - 22 Nov 2012)
  6. A novel effective triglyceride microemulsion for chemical flooding, SPE Asia Pacific Oil and gas Conference and Exhibition, Society of Petroleum Engineers (International) (22 Oct 2012 - 24 Oct 2012)
  7. A Novel Effective Triglyceride Microemulsion for Chemical Flooding, Society of Petroleum Engineers Asia Pacific Oil and Gas Conference and Exhibition held in Perth, Australia, 22 24 October 2012., Society of Petroleum Engineers (International) (22 Oct 2012 - 24 Oct 2012)
  8. Principal component analysis of debutanizer column International conference of Chemical Engineering and Industrial Biotechnology, 25th Symposium of Malaysian Chemical Engineers 2011, Institute of Chemical Engineers (International) (28 Nov 2011 - 01 Dec 2011)
  9. Neural network model for composition prediction in debutanizer column, 17th Regional Symposium on Chemical Engineering (RSCE 2010), AuNSeed Net (International) (22 Nov 2010 - 23 Nov 2010)
  10. Application of Natural Clay to Formulate Non-Traditional Completion Fluid that Triples Oil Productivity, International Conference of Applied Chemistry and Chemical Engineering, Tokyo, Japan, World Academy of Science, Engineering, and Technology (WASET) (International) (25 May 2010 - 26 May 2010)
  11. Flow Properties of Super Light Weight Completion Fluid for Perforation Cleanup during Underbalance Condition, 2010 SPE/IADC Managed Pressure Drilling and Underbalanced Operations Conference and Exhibition, Kuala Lumpur, Malaysia, Society of Petroleum Engineers (SPE) (International) (24 Feb 2010 - 25 Feb 2010)
  12. Rheological Properties of Super Light Weight Completion Fluid for Perforation with Underbalance, National Symposium of IATMI, Bandung, Indonesia, Society of Indonesian Petroleum Engineers (IATMI) (International) (02 Dec 2009 - 05 Dec 2009)
  13. Optimization and Formulation of Super Lightweight Completion Fluid from Saraline to Increase Hydrocarbon Production, 9th Ascope Conference & Exhibition, Bangkok, Thailand, Ascope (International) (17 Nov 2009 - 20 Nov 2009)
  14. The Effect of Clay in the Formulation of Non-traditional Completion Fluid for Underbalance Perforation, Chemical Engineering Conference (Chemeca) 2009, Perth, Australia, Chemical Engineering Australia (International) (27 Sep 2009 - 30 Sep 2009)
  15. Super Light Weiht Completion Fluid Formulation from Non-Damaging Material, 2nd Engineering Conference on Sustainable Engineering, Infrastructure Development & Management, Kuching, Sarawak, Malaysia, University of Malaysia Sarawak (National) (18 Dec 2008 - 19 Dec 2008)
  16. Optimization of Super Lieght Weight Completion Fluids using Fractional Factorial Design, 10th Congress of IATMI and National Symposium, Jakarta, Indonesia, Society of Indonesian Petroleum Engineers (IATMI) (International) (11 Nov 2008 - 14 Nov 2008)
  17. Increasing Production by Maximizing Underbalance , SPE International Oil Conference and Exhibition, Veracruz, Mexico, Society of Petroleum Engineers (SPE) (International) (27 Jun 2007 - 30 Jun 2007)
  18. Effect of Permeability Distribution and Interfacial Tension on Gas Condensate Relative Permeability: An Experimental Study, SPE Asia Pacific Oil and Gas Conference and Exhibition, Jakarta, Indonesia, Society of Petroleum Engineers (SPE) (International) (09 Sep 2003 - 11 Sep 2009)
  19. Control of NOx Emission using Perovskite Membrane, Environment 2003 Conference, Penang, Malaysia (National) (18 Feb 2003 - 19 Feb 2003)
  20. A Modified Lignosulfonate As an Environmentally Friendly Drilling Mud Thinner, Regional Symposium on Chemical Engineering, Kuala Lumpur, Malaysia, University of Malaya (International) (03 Oct 2002 - 05 Oct 2002)
  21. Net Stress/Permeability Effect on Gas Non-Darcy Flow, SPE Asia Pacific Oil and Gas Conference, Kuala Lumpur, Malaysia, Society of Petroleum Engineers (SPE) (International) (14 Apr 1997 - 16 Apr 1997)
  22. The Environmental Impact of Mercaptans in Underground Storage, SPE Eastern Regional Meeting,Lexington, Kentucky, USA , Society of Petroleum Engineers (SPE) (International) (01 Oct 1996 - 02 Oct 1996)
PRESENTER
  1. Rheological and Filtration Performances of Rhizophora mucronata Tannin Water-Based Drilling Fluid, 6th International Conference on Recent Advances in Materials, Minerals & Environment (RAMM), SPE (International) (04 Mar 2019 - 05 Mar 2019)
  2. Jatropha Based Microemulsion Efficiency Screening Study for Enhanced Oil Recovery, International Conference on Chemical Industry and Science, IPN malaysia (International) (27 Feb 2015 - 28 Feb 2015)
  3. Rheological and statistical evaluation of nontraditional lightweight completion fluid and its dependence on temperature , 5th Regional Conference on Chemical Engineering, AUN-SEED NET (International) (07 Feb 2013 - 08 Feb 2013)
  4. The effect of clay as homogenizing agent in non-traditional super light weight completion fluid for underbalance perforation., 3rd Regional Conference on Chemical Engineering, AunSeed Nett (International) (20 Jan 2011 - 21 Jan 2011)
  5. High Pressure High Temperature Density of Nontraditional Super Lightweight Completion Fluid for Underbalance Perforation, 2nd Onshore Technology Asia Conference 2010, Jakarta, Indonesia, Petromin (International) (15 Nov 2010 - 16 Nov 2010)
  6. The effect of clay in the formulation of nontraditional completion fluid for underbalance perforation, Chemeca 2009, Chemical engineering association (International) (27 Sep 2009 - 30 Oct 2009)

ACADEMIC/PROF. SERVICES

Evaluation
  1. (2023) Phd External Examiner, International, (External Examiner)
  2. (2023) AJK Penilai Pengkomersilan (Jkpp) Universiti Malaya, University, (Internal Evaluator)
  3. (2022) External Examiner/Moderator for Master of Engineering & Environment Program At University Malaysia Sarawak, National, (External Examiner)
  4. (2021) External Examiner for Utp Phd Student, National, (External Examiner)
  5. (2021) Article Reviewer, International, (External Examiner)
  6. (2020) External examiner for Belazreg Lazreg a PhD student at the Deparment of Petroleum Enigineering, Universiti Teknologi Petronas, (External Examiner)
  7. (2019) External examiner for UTP master student in Petroleum Engineering. Thesis title: Investigation on Metal Oxides nano-material for Enhanced Surfactant Flooding, (External Examiner)
  8. (2018) Master Thesis: Effect of Supercritical CO2 on Geopolymer Cement Under Elevated Temperature and Pressure, (External Examiner)
  9. (2018) Evaluator for UTP internal grant , (Advisory Committee)
  10. (2018) To review a technical journal paper for publication entitled, PERMEABILITY REDUCTION ESTIMATION FOR ENHANCED OIL RECOVERY: INSIGHT FOR LABORATORY EXPERIMENTS, (Reviewer)
  11. (2018) Wettability Alteration and Interfacial Tension Reduction using Surface Modified Nanosilica for Enhanced Oil Recovery, (External Examiner)
  12. (2018) Editorial board in International Journal of Latest Engineering Science (IJLES), (Editor)
  13. (2017) UTP Project Evaluator, (Reviewer)
  14. (2017) UTP Conference Reviewer 2017, (Reviewer)
  15. (2017) Malaysia Japan Institute of Technology Grant Evaluator, (Reviewer)
  16. (2016) Technical Programme Committee Member for the 10th International Petroleum Technology Conference (IPTC), held on 14-16 November 2016 in Bangkok, Thailand., (Advisory Committee)
  17. (2013) "Probing Colloidal Interactions Between Biosurfactant-Modified Droplets and Surfaces." , (Reviewer)
  18. (2012) Editorial board for the Journal of Petroleum Technology, JPT under the Society of Petroleum Enginneers., (Editor)
  19. (2012) Appointed as external examiner for Sima Sheykh Alian, a MSc in Petroleum Engineering, University Technology Petronas, UTP . Thesis title:Study of Asphalthene precipitation induced formation damage during CO2 injection for Malaysian Oil Sample. , (External Examiner)
  20. (2012) Appointed as external examiner for Dahlila Kamat, a MSc in Petroleum Engineering, University Technology Petronas (UTP), for thesis "Assessment of Local Sand for Gravel Packing Application". , (External Examiner)
Contribution to external organisation
  1. (2023) Board of Director, National, (Expert Advisor)
  2. (2023) Editor of Arabian Journal of Geosciences, International, (Expert Advisor)
  3. (2022) Editorial Board of Engineering Technology Open Access Journal, International, (Expert Advisor)
  4. (2021) Editorial Board of Journal of Petroleum Technology, International, (Expert Advisor)
  5. (2020) SPE Student Chapter Evaluator, Society of Petroleum Engineers
  6. (2019) Research program of Tracer Technology, Agensi Nuklear Malaysia, National
  7. (2019) Education Chairman for Society of Petroleum Engineer (SPE) Kuala Lumpur Section, Society of Petroleum Engineers
  8. (2019) Mentor in Mentor/Mentee SPE International Program, Society of Petroleum Engineers
  9. (2016) PVT Fluid Research Collaboration, 3 Phase Sdn Bhd, National
  10. (2014) External Examiner for UTP Master student in Petroleum Engineering Department, University Technology Petronas
  11. (2014) VIP Guest and Reviewer for THE INTERNATIONAL CONFERENCE ON INTEGRATED PETROLEUM ENGINEERING AND GEOSCIENCES (ICIPEG) 2014 , University Technology Petronas
  12. (2014) Technical Reviewer for THE INTERNATIONAL CONFERENCE ON INTEGRATED PETROLEUM ENGINEERING AND GEOSCIENCES (ICIPEG) 2014 2014 - 2014 , University Technology Petronas
  13. (2013) Subject Matter Expert Panel (SMEP) for Oil and Gas Sector, Advanced Manufacturing Institute, MIGHT-METEOR Advanced Manufacturing Sdn Bhd, National
  14. (2013) Reviewer of Research on Chemical Intermediate (RINT) Journal, RINT- ‐D- ‐13- ‐00128, Studying Rheological Behavior of Nanoclay as Oil Well Drilling Fluid, 30 July 2013., Research on Chemical Intermediate (RINT) Journal
  15. (2013) Expert Panel Workshop for Petroleum Engineering and Geoscience Programme, University Technology PETRONAS. , PETRONAS
  16. (2013) American Chemical Society (ACS) Petroleum Research Fund Reviewer, PRF# 54128- ‐ND5, Probing Colloidial Interaction Between Biosurfactant- ‐Modified Droplets and Surfaces , American Chemical Society, 1155 Sixteenth St., NM, Washington, Washington, DC 20036, USA. July 2013., American Chemical Society
  17. (2013) Technical reviewer for the Journal of Applied Polymer Science in 2013, Journal of Applied Polymer Science River Street, Hoboken, NJ, USA
  18. (2012) SPE Journal of Petroleum Technology Editorial Commitee, Society of Petroleum Technology
  19. (2012) VIP Guest and Reviewer for THE INTERNATIONAL CONFERENCE ON INTEGRATED PETROLEUM ENGINEERING AND GEOSCIENCES (ICIPEG) 2012, University Technology Petronas
  20. (2011) University of Malaya Commercialization Committee , University of Malaya Center of Innovation & Commercialization (UMCIC)
  21. (2011) Intellectual Property (IP) Patent Committee , University of Malaya Center of Innovation & Commercialization
  22. (2008) Collaborative Research, BCI Chemical Corporation Sdn Bhd, National
  23. (2006) Consultancy, 3M Asia Pacific, International
Contribution to event
  1. (2022) AJK Tapisan (Pelantikan) Fakulti Kejuruteraan, University, (Event Coordinator)
  2. (2021) Industrial Training Supervisor for Chemical Engineering Department, 2021, University, (Course Facilitator)
  3. (2021) Social Engagement Supervisor for Chemical Engineering Department, 2021, University, (Course Facilitator)
Mentoring
  1. (2021) Mentor in Spe Ementoring Program 2021., International, (Mentor)

SUPERVISION

Postgraduate Student
PhD/ Doctoral
  1. (2023) SYNTHESIS OF NOVEL ECO-FRIENDLY COCONUT SHELL DERIVED NANOCOMPOSITES TO PRODUCE HYDROGEN ENERGY USING PHOTOCATALYSIS, NURALMEERA BALQIS BINTI MOHD AZLAN
  2. (2023) Ethyl-Hexyl Ester, a Product of Esterification of Palm Fatty Acid Distillate as a Potential Base Oil in Drilling Fluid, NIK NURFATMAH PZ BINTI PAUZI
  3. (2023) Development of Novel Surface Modified Iron Oxide Nanoparticles for Polymer Flooding Application, SITI NURLIYANA BINTI CHE MOHAMED HUSSEIN
  4. (2022) Reservoir simulation, Abdullah Rizky Rizky
  5. (2022) SYNTHESIS OF NOVEL ECO-FRIENDLY COCONUT SHELL DERIVED NANOCOMPOSITES TO PRODUCE HYDROGEN ENERGY USING PHOTOCATALYSIS, Naseem Akhtar
  6. (2022) EVALUATION OF GRAPHENE OXIDE IN WELL STIMULATION, ENHANCED OIL RECOVERY BY CHEMICALLY ENHANCED WATER ALTERNATING GAS (CEWAG), AND CO2 GEOSEQUESTRATION, Bonavian Hasiholan
  7. (2021) PHOTOCATALYSIS, NURAENI
  8. (2021) Synthesis of pineapple waste-mediated Graphene oxide for enhanced Rheological properties of Water and Ester based Drilling Fluids, S A Roqibul Ferdous
  9. (2020) NANOPARTICLES ASSISTED ELECTROMAGNETIC HEATING FOR ENHANCED OIL RECOVERY, SITI NURLIYANA BINTI CHE MOHAMED HUSSEIN
  10. (2020) EsTER AS BASE-OIL FOR DRILLING MUD FORMULATION, Nik Nurfatmah Pz Binti Pauzi
  11. (2020) Extraction and Characterization of graphene from unwanted industrial wastes precursors for water-based drilling fluids, Ranaa Mohammad A Almarshedy
  12. (2019) Methyl Ester Sulfonates Surfactant in Enhanced Oil Recovery, Nor Saiful Hafiz bin Abdul Habib (Universiti Putra Malaysia (UPM))
  13. (2017) Development Nano Magnetic Fluid for Enhanced Oil Recovery Improvement, Zulhelmi Amir (M0100606)
  14. (2015) THERMAL AND OXIDATIVE DEGRADATION OF MORPHOLINE AND BLEND OF PIPERAZINE AND DIETHANOLAMINE FOR CO2 CAPTURE, SHAUKAT ALI
  15. (2015) Palm oil-based polyol esters as biolubricants in synthetic-based drilling fluid, Dina Kania (M0100103)
  16. (2015) Methyl Ester Sulfonates as Surfactant inEOR Chemical Flooding and the Effect of Reservoir Condition on its Stability, Nor Saiful Hafiz Bin Abdul Habib (M0100103)
  17. (2015) Carbon Based Nano Materials as Filtrate Reducer for Eater-Based Drilling Fluid, Siti Zulaika binti Razali (M0100103)
  18. (2014) DEVELOPMENT OF NEURAL NETWORK BASED MODELS TO CONTROL TEMPERATURE AND ESTIMATE COMPOSITION OF A DEBUTANIZER COLUMN, NASSER BIN MOHAMED RAMLI
  19. (2009) Novel Microemulsifier for Enhanced Oil Recovery, Zahra Jeirani
Master
  1. (2023) Formulation of Highly Exposed (001) Facet Titanium Dioxide/Graphene Oxide Nanocomposite for an Efficient Photodegradation of Organic Dyes, ARINI IZZATADDINI
  2. (2021) Development of Waste Derived Graphene Oxide Esther Drilling Fluid from Unwanted Waste, Jhosna a/p Muniandy (Universiti Putra Malaysia (UPM))
  3. (2021) Development of Ester based Drilling Fluid, Jhoshna A/P Muniandy (Universiti Putra Malaysia (UPM))
  4. (2020) Functional Nanomaterial as water treatment, Arini Izzataddini
  5. (2016) THE EFFECTS OF ORGANOSOLV PRETREATMENT ON BIOETHANOL PRODUCTION FROM PALM EMPTY FRUIT BUNCH AND ITS POTENTIAL AS SOLID BIOETHANOL, NURFAHMI
  6. (2016) A COMPARATIVE STUDY OF STABILITY OF AMINES UNDER ABSORBER CONDITIONS, NUR DALILA BINTI SALEHHUDDIN
  7. (2015) THERMAL DEGRADATION INVESTIGATION OF DIETHANOLAMINE, AMINOETHYLETHANOLAMINE AND THIER BLEND IN CO2 CAPTURE, IDRIS MOHAMEDSAEED IDRIS IBRAHIM
  8. (2015) BIOETHANOL PRODUCTION, NURFAHMI
  9. (2014) Rheological and statistical study of Saraline-based super lightweight completion fluid in high-pressure and high-temperature conditions, ZULHELMI BIN AMIR
  10. (2014) FORMULATION AND EFFICIENCY STUDY OF JATROPHA - BASED TRIGLICERIDE MICROEMULSION FLOODING FOR ENHANCED OIL RECOVERY, NORDIYANA BINTI MUHAMMAD SOFFIAN WONG
  11. (2012) Formulation of a lightweight drilling fluid using biodegradable natural polymers for underbalanced drilling, Lim Sim Nee (University of Malaya (UM))
  12. (2007) DEVELOPMENT OF SARALINE BASED SUPER LIGHT WEIGHT COMPLETION FLUID IN UNDERBALANCE PERFORATION, MUHAMMAD
  13. (2007) DEVELOPMENT OF NONTRADITIONAL COMPLETION FLUID TO MINIMIZE PERFORATION INDUCED FORMATION DAMAGE THROUGH UNDERBALANCED PERFORATION, MUNAWAR KHALIL
Under Graduate Students
  1. (2023) The effects of eco-friendly industrial waste from Bromeliaceae species generated additives in drilling fluids
  2. (2023) Industrial Training, Ilya Nazifa Binti Nordin Amini
  3. (2015) Modification of Surfactant for EOR
  4. (2015) Improving Reservoir Simulation Waterflooding Scheme

TEACHING

Bachelor
  1. (2023) KIX2002 - Engineering Economic Analysis
  2. (2023) KIX3002 - Engineering Entrepreneurship
  3. (2023) KIL3009 - Laboratory and Communication Ii
  4. (2023) KIL2004 - Laboratory and Communications I
  5. (2023) KIL4010 - Petroleum Engineering
  6. (2021) KIX2002 - Engineering Economic Analysis
  7. (2021) KIX3002 - Engineering Entrepreneurship
  8. (2021) KIL3009 - Laboratory and Communication Ii
  9. (2021) KIL2004 - Laboratory and Communications I
  10. (2021) KIL4010 - Petroleum Engineering
  11. (2018) KIL1004 - Engineering Drawing
  12. (2017) KIL1004 - Engineering Drawing
  13. (2017) KKEK3282 - Design Exercise
  14. (2017) KKEK4165 - Project Management
  15. (2017) KKEK4282 - Research Project
  16. (2016) KKEK3282 - Design Exercise
  17. (2016) KKEK4165 - Project Management
  18. (2016) KKEK4281 - Design Project
  19. (2016) KKEK4282 - Research Project
  20. (2016) KKEK4283 - Research Project
  21. (2016) KKEK4325 - Petroleum Engineering
  22. (2015) KKEK3282 - Design Exercise
  23. (2015) KKEK4165 - Project Management
  24. (2015) KKEK4283 - Research Project
  25. (2014) KKEK3282 - Design Exercise
  26. (2014) KKEK4165 - Project Management
  27. (2014) KKEK4281 - Design Project
  28. (2014) KKEK4325 - Petroleum Engineering
  29. (2013) KKEK4281 - Design Project
  30. (2013) KKEK4283 - Research Project
  31. (2013) KKEK4325 - Petroleum Engineering
  32. (2012) KKEK4325 - Petroleum Engineering

PATENT/IPR

  • SYNTHESIS OF BIOWASTE-DERIVED GRAPHENE OXIDE TO FORMULATE A NOVEL COAGULANT TO IMPROVE EFFICIENCY OF DESANDER
    COPYRIGHT

SOCIAL RESPONSIBILITY ACTIVITIES

  • Energy4me Program At Sekolah Kebangsaan Bukit Lanjan, (25 Oct 2023 - 25 Oct 2023) (National)
  • Energy4me Initiative in Spe Kl, (12 Nov 2019 - 12 Nov 2019)
  • Workshop On Advanced Radio Tracer Technology, (05 Nov 2019 - 07 Nov 2019)
  • Technical Committee for Regional Symposium in Chemical Engineering 2019, (30 Oct 2019 - 31 Oct 2019)
  • Session Chairman for Regional Symposium in Chemical Engineering, (30 Oct 2019 - 31 Oct 2019)
  • Spe Education Chairman, (01 Jan 2019 - 31 Dec 2020)
  • Panelist in Spe Student Chapter Malaysia Oil & Gas Convention 2017, (01 Nov 2017 - 02 Nov 2017)
  • Energy4me for The Society of Petroleum Engineers, (09 Oct 2017 - 09 Oct 2017)
  • Panel Judge for Beyond Engineering Innovation (Begin) Challenge 2017, (03 May 2017 - 03 May 2017)
  • Lead Judge At Geoscience Industrial Week 2017, (19 Apr 2017 - 19 Apr 2017)
  • Volunteer to The Society of Petroleum Engineers (Spe) Based in Usa., (01 Jan 2017 - 29 Dec 2018)
  • Usga Cimb Golf Classic 2016 Volunteer, (20 Oct 2016 - 23 Oct 2016)
  • Lead Judge At Geoscience Industrial Week 2016, (26 Apr 2016 - 26 Apr 2016)
  • Invited Speaker for Motivational Talk At Sekolah Kebangsaan Sungai Binjai, Klang, Selangor, (24 Feb 2016 - 25 Mar 2016)
  • Serves as a Judge in "Pertandingan Kemahiran Kolej Komuniti (Pkkk) 2013" Under Inovasi dan Rekacipta Category, 25 November 2013., (25 Nov 2013 - 25 Nov 2013)
  • Serves as a Volunteer for The Society of Petroleum Engineers (Spe) in Mentor/Mentee Program to Help Postgraduate and Graduate Students in Petroleum Engineering Degrees., (01 Jan 2013 - 31 Dec 2015)
  • Editor/Reviewer for Geological Society of Malaysia, (01 May 2012 - 30 Apr 2013)
  • Invited Speaker in Wacana Kepimpinan Akademik Institusi Pendidikan Guru (Ipg), (23 Apr 2012 - 26 Apr 2012)
  • Commercialization Panel, (02 Jan 2012 - 31 Dec 2018)
  • Editorial Commitee for Spe Journal of Petroleum Technology, (02 Jan 2012 - 31 Dec 2020)
  • Ip Evaluation Panel, (01 Jan 2012 - 31 Dec 2018)
  • Instituition of Engineers Malaysia Cheme Car Competition Committee, (01 May 2010 - 01 May 2012)

COURSE ATTENDED

Internal / External Course
INDUCTION COURSE
  1. KURSUS INDUKSI, Aras 1, Bangunan Peperiksaan (30 Mar 2006 - 30 Mar 2006)
  2. KURSUS INDUKSI, Aras 1, Bangunan Peperiksaan (25 May 2006 - 25 May 2006)
  3. KURSUS INDUKSI, Pusat Pengajian Luar Ulu Gombak UM (04 Jul 2005 - 06 Jul 2005)
  4. KURSUS INDUKSI, Aras 1, Bangunan Peperiksaan (28 Jul 2005 - 28 Jul 2005)
  5. KURSUS INDUKSI, Hotel Singgahsana, Petaling Jaya (07 Jul 2005 - 30 Jul 2005)
INTERNAL COURSE
  1. KURSUS KEPIMPINAN DAN PENGURUSAN, Hotel Singgahsana (28 Nov 2006 - 29 Nov 2006)
  2. KURSUS PENGAJARAN BERKESAN/PENGURUSAN KURIKULUM, Hotel Singgahsana (26 Apr 2005 - 27 Apr 2005)
EXTERNAL COURSE
  1. KURSUS OIL & GAS AT A GLANCE, Renaissance, Kuala Lumpur (12 Mar 2008 - 13 Mar 2008)
  2. NANOCOATING FOR OIL AND GAS CORPORATE TRAINING, Parkroyal Hotel, Kuala Lumpur (19 Nov 2007 - 20 Nov 2007)
  3. ADVANCED RADIO TRACER TECHNOLOGY, Agensi Nuklear Malaysia (05 Nov 2019 - 07 Nov 2019)
  4. SPE ATW : DEEP SATER DRILLING AND COMPLETION, Langkawi, Kedah (16 Oct 2011 - 19 Oct 2011)
  5. ECLIPSE BLACKOIL RESERVOIR SIMULATOR, Rohas Perkasa, Kuala Lumpur (24 Sep 2018 - 28 Sep 2018)
  6. BENGKEL WELL INTEGRITY-FROM CONSTRUCTION TO ABANDONMENT, Miri Mariott Resort & Spa, Miri Sarawak (03 Oct 2010 - 06 Oct 2010)
  7. BENGKEL NANO TECHNOLOGY IN THE OIL & GAS INDUSTRY-AN EVOLUTION OR REVOLUTION, Langkawi, Kedah (06 Dec 2009 - 09 Dec 2009)
COURSES ORGANIZED BY PTJ
  1. WORKSHOP : POSTGRADUATE SUPERVISION WORKSHOP, Training Room, Level 14, Wisma R & D (28 May 2013 - 28 May 2013)
  2. WORKSHOP ON SPECTRUM (BASIC), Makmal Komputer 1, Fakulti Alam Bina Universiti Malaya (13 Oct 2014 - 13 Oct 2014)
  3. TALK : ENHANCING RESEARCH VISIBILITY AND CITATIONS THROUGH STRATEGIC PUBLISHING PRACTICES, Dkc, Moot Building, Faculty of Law (11 Jun 2013 - 11 Jun 2013)
CONFERENCE
  1. 2016 ASIA PACIFIC OIL & GAS CONFERENCE & EXHIBITION, Perth (24 Oct 2016 - 29 Oct 2016)
INTERNAL COURSE- ORGANIZED BY PTJ
  1. WORKSHOP: MANAGING STRESS WITH MINDFULNESS, Universiti Malaya (10 Jul 2018 - 10 Jul 2018)
RESEARCH
  1. EPCC & MRS FOR GAS MALAYSIA STATIONS UNDER HAMMER ENGINEERING SDN BHD, (01 Dec 2022 - 28 Feb 2023)