CURRICULUM VITAE
PERSONAL DETAIL
DR. AZUDDIN BIN MAMAT |
|||
| Senior Lecturer | |||
| Department of Mechanical Engineering | |||
| Faculty of Engineering | |||
| +603-79675265 | |||
| +603-79675330 | |||
| azuddin@um.edu.my | |||
| Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, W.Persekutuan Kuala Lumpur, Malaysia | |||
ResearcherID Link |
http://www.researcherid.com/rid/B-5279-2010 | ||
ACADEMIC QUALIFICATION
(Qualification), (Institution).
- PhD, UNIVERSITY OF MALAYA (UM)
- MEngSc, UNIVERSITY OF MALAYA (UM)
- BE (HONS), UNIVERSITY OF MALAYA (UM)
ADMINISTRATIVE DUTIES
(Role), (Level), (Start date),(End Date).
- Ahli Jawatankuasa Teknikal (TAC) Jabatan Tenaga Manusia (JTM), Kem. Sumber Manusia, National, 29/08/2016 to 28/08/2018 (ADTEC SHAH ALAM)
AREAS OF EXPERTISE
(Area).
- Machining (Micro Machining)
- Plastic Moulding Technology
- Cad/Cam/Cae Applications
RECENT SELECTED PUBLICATIONS
(Publication).
Article in Academic Journals
2017
-
Study of the Effects of Injection Molding Parameter on Weld Line Formation (ISI-Indexed)
-
Effect of Mixing Process Parameters and Suitability of Backbone Polymer
for Aluminum Powder Injection Molding Feedstock (ISI-Indexed)
-
J N Nadia, F Aaron and M Azuddin. (2017). Influence of Electromagnetic Field on Metal Cutting in Turning Operation of AISI 1018 Low Carbon Steel. IOP Conf. Series : Materials Science and Engineering 210 (SCOPUS-Indexed)
2015
- N.I.M. Nordin, S.M. Said, R. Ramli, K. Weide-Zaage, M.F.M. Sabri, A. Mamat, N.N.S. Ibrahim, A. Mainal, R.S. Datta. 2015. Impact of aluminium addition on the corrosion behaviour of Sn 1.0Ag 0.5Cu lead-free solder. RSC Advances 5(120):99058-99064. (ISI-Indexed)
- NIM Nordin, SM Said, R Ramli, K Weide-Zaage, MFM Sabri, A Mamat, NNS Ibrahim, A Mainal, RS Datta, Impact of aluminium addition on the corrosion behaviour of Sn1.0 Ag0.5Cu lead-free solder, RSC Advances, 5(120), 99058-99064 (2015) (ISI-Indexed)
2014
- Development and performance evaluation of a low-cost custom-made vertical injection molding machine M. Azuddin I. A. Choudhury Z. Taha, J Braz. Soc. Mech. Sci. Eng. DOI 10.1007/s40430-014-0145-z (SCOPUS-Indexed)
- Fabrication and characterization of micro-dimple array on Al2O3 surfaces by using a micro-tooling Taposh Roy, Dipankar Choudhury,Azuddin Bin Mamat, Belinda Pingguan-Murphy, Ceramics International Volume 40, Issue 1, Part B, January 2014, Pages 2381 2388 (ISI/SCOPUS Indexed Publication)
- Preparation of Aluminum Feedstock for Green Part Specimen Using Metal Injection Molding, H Saidin, M Azuddin, Applied Mechanics and Materials 465, 1250- 1254, 2014 (SCOPUS-Indexed)
- Effect of GMAW-CMT Heat Input on Weld Bead Profile Geometry for Freeform Fabrication of Aluminium Parts A Wagiman, B Wahab, M Saidin, Z Mohid, A Mamat Applied Mechanics and Materials 465, 1370-1374 (SCOPUS-Indexed)
- Mechanism and Design Analysis of Articulated Ankle Foot Orthoses for Drop-Foot, M Alam, IA Choudhury, AB Mamat - The Scientific World Journal, 2014 (ISI/SCOPUS Indexed Publication)
- Fabrication and characterization of DLC coated microdimples on hip prosthesis heads, Dipankar Choudhury, Hee Ay Ching, Azuddin Bin Mamat, Jan Cizek, Abu Osman, Noor Azuan, Martin Vrbka, Martin Hartl, Ivan Krupka, Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2014 (ISI/SCOPUS Indexed Publication)
2013
- M. Azuddin, 2012, Tool wear and surface roughness observation when milling sks3 tool steel with electromagnetic effects. Advanced Material Research, Vol 630, 153 - 157 (SCOPUS-Indexed)
2012
- I. A. Choudhury, M. Azuddin, Hoon, Lawal. Effect of magnetization in turning of ASSAB 705 steel using coated carbide insert (ISI/SCOPUS Indexed Publication)
- M. Azuddin, Tool-workpiece temperature for continuous and interrupted cutting of ASSAB 760 Steel with dry machining process, Advanced Material Research, Vol 476-478, 392-396 (SCOPUS-Indexed)
2011
- Azuddin M.; Zahari T.; Choudhury I. A. 2011. Observation of Polypropylene (PP) Melt Flow on Microchannel Using Polymethyl Methacrylate (PMMA) Mold. MATERIALS AND MANUFACTURING PROCESSES Volume: 26 Issue: 2 Pages: 255-260 Article Number: PII 935349970 DOI: 10.1080/10426914.2010.480996 Published: 2011 (ISI-Indexed)
- Azuddin M, Taha Z, Choudhury IA, 2011, Performance Study of a Custom-Made Vertical Injection Molding Machine, Res Engineeria, Vol 1, pp 1-9 (Non-ISI/Non-SCOPUS)
- M. Azuddin, T. Zahari, and I. A. Choudhury, Observation of Polypropylene (PP) Melt Flow on Microchannel Using Polymethyl Methacrylate (PMMA) Mold, Materials and Manufacturing Processes, 26: 1¿6, 2011 (ISI-Indexed)
2009
- Mohd. Rizwan Hamsin, Azuddin Mamat & Aznijar Ahmad- Yazid, 2009. Design and analysis of multi-cavity traditional and H-branching runners for plastic injection mold , IEM Journal, Vol. 71(2), pp. 22-35. (Non-ISI/Non-SCOPUS)
- Journal Mohd. Rizwan Hamsin, Azuddin Mamat and Aznijar Ahmad-Yazid 2009. Design and Analysis Of Multi-Cavity Traditional and H-branching runners for Plastic Injection Mold,Journal - The Institution of Engineers, Malaysia, Vol 71, pp 22 - 35
- Azuddin Mamat and Mohd Afif Mohd Rosli (2009),Development and analysis of taper tool path for micro turning operation, Modern Applied Science, Vol.3, No. 1, pp 176 - 186
- Azlan Abdul Rahman, Azuddin Mamat and Abdullah Wagiman (2009)Effect of Machining Parameters on Hole Quality of Micro Drilling for Brass, Modern Applied Science, Vol 3, Issue 5, pp 221-230 (Non-ISI/Non-SCOPUS)
2008
- M. Hafiz Helmie, M. Azuddin and W. Abdullah, Investigation of surface roughness and material removal rate (MRR) on tool steel using brass and copper electrode for Electrical Discharge Grinding (EDG) process, Journal of Mechanical and Manufacturing Engineering, UTHM submitted
- M. Azuddin and W. Abdullah, A study of surface roughness and burr formation for Aluminum 6061 with different spindle speed and federate for small cutting tool diameter, Journal of Mechanical and Manufacturing Engineering, UTHM submitted
- Nukman Yusoff, Saiful Rizal Ismail, Azuddin Mamat and Aznijar Ahmad-Yazid, Selected Malaysian Wood CO2-LASER cutting parameters and cut quality , American Journal of Applied Sciences 5(8), 2008, pp. 990-996, (ISSN 1546-9239).
2007
- Azuddin Mamat, Aznijar Ahmad-Yazid and Abdullah Wagiman, Effect of depth of cut and cutting tool size on burr formation in micro milling of various engineering materials, Vol.X, No X Xxxxxxx 200X pp XX- XX, 200X Engineering e-Transaction, University of Malaya submitted
Proceeding
2003
- Azuddin Mamat, Nukman Yusoff and Imtiaz Ahmed Choudhury, Expert System In Die Design: Cutting and Forming Application, Conference on Intelligent System & Robotics, Advanced Technology Congress 2003, Putrajaya Marriot Hotel, IOI Resort, 20 - 21 May 2003, pp. 56 - 63.
- M. Azuddin and I.A. Choudhury, A Survey on Mold & Die Making Industries in Malaysia, 2nd Technical Postgraduate Symposium 2003 (National Level), TechPos2003, Crystal Crown Hotel, Petaling Jaya, 16 - 17 December 2003, pp. 92 - 96.
2002
- M. Azuddin, Y. Nukman, and I.A Choudhury, Expert System In Die Design, The 1st Technical Postgraduate Symposium 2002, TechPos, Crystal Crown Hotel, Petaling Jaya 16 - 17 May 2002, pp. 151 - 156.
Others
2010
- Visualization of Polypropylene (PP) cavity filling through full and semi Polymethyl Methacrylate (PMMA) mold, Azuddin Mamat, Zahari Taha, Imtiaz Ahmed Choudhury, National Conference on Advanced Manufacturing & Material Engineering, (NAMME 2010) 25 & 26 May 2010, Batu Pahat, Johor
2009
- Munira Lutfi, Prasetyo Edi, Azuddin Mamat & Aznijar Ahmad-Yazid, Surface roughness and machining accuracy when micro-turning copper , 2nd AUN/SEED-Net Regional Conference in Manufacturing Engineering, Bandung, Indonesia, 07-08 December 2009.
2008
- Azuddin Mamat, Aznijar Ahmad-Yazid, Amir Radzi Abdul Ghani and Abdullah Wagiman, Burr formation characteristics of various engineering materials in micro milling , 1st AUN/SEED-Net Regional Conference in Manufacturing Engineering (AUN/SEED-Net-RC ManuE 2008), Manila, Philippines, 24-25 November 2008.
2006
- H. Rizwan and M. Azuddin, ¿Design and analysis of 8 cavities runner for plastic injection molding¿, International Conference on Manufacturing and Materials Processing 2006 (ICMM 2006). 14 ¿ 15 March 2006, Cititel Mid Valley Hotel, Kuala Lumpur, pp. 440 ¿ 445
- Lamphanh Sisamouth, M. Azuddin, M. Hamdi and T. Ariga, ¿Development and fabrication of water cooling channel for injection mold through machining and brazing technology, International Conference on Manufacturing and Materials Processing 2006 (ICMM 2006). 14 ¿ 15 March 2006, Cititel Mid Valley Hotel, Kuala Lumpur, pp. 609 ¿ 616
- I.A. Choudhury, M. Azuddin and C.H. Tee, Evaluation of fracture toughness of ceramic inserts by indentation techniques , International Conference on Manufacturing and Materials Processing 2006 (ICMM 2006). 14 15 March 2006, Cititel Mid Valley Hotel, Kuala Lumpur, pp. 175 180
2005
- Lamphanh Sisamouth, M. Azuddin, M. Hamdi and T. Ariga , ¿Development and fabrication of water cooling channel for injection mold through machining and brazing technology¿, AUN/SEED-Net 5th Field-Wise Seminar, Eastin Hotel, Kuala Lumpur, 28 Feb ¿ 1 March 2005
- C.C. Onn, I.A Choudhury and M. Azuddin, ¿Computer Aided Die Design System (CADDS): Cup Drawing Analysis and Validation¿, Conference on Computer Integrated Systems, International Advanced Technology Congress 2005 (ATCi 2005) Putrajaya Marriot Hotel, IOI Resort, 6 ¿ 8 Dec 2005, pp. 56 ¿ 63.
2004
- M. Azuddin and I.A. Choudhury, ¿ Development of a Computer Aided Die Design System (CADDS)¿, 3rd International Conference on Advanced Manufacturing Technology (ICAMT 2004), Pan Pacific Hotel, Kuala Lumpur, 11 ¿ 13 May 2004, pp. 338 ¿ 344.
AREAS OF RESEARCH
(Project title), (Role), (From)-(Until), (Level), (Source).
-
Protable Modular Electrical Discharge Machining (pedm) Machine, Principal Investigator(PI), 2017 - 2018, RU Geran, (National)
-
Stem Through Robotics - Hand's On Application, Principal Investigator(PI), 2016 - 2016, RU Geran, (National)
-
Plant Species Identification Using Augmented Reality, Consultant, 2015 - 2019, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC)), (University)
-
Use Of Boric Acid Powder Aided Vegetable Oil For Environmetnally Benign Minimum Quantity Lubrication In Machining Inconel 718, Consultant, 2015 - 2018, Fundamental Research Grant Scheme (FRGS), (National)
-
Fundamental Study Of Adaptive Gyroscopic Stabilization Approach In Unstable Dynamical Systems, Consultant, 2015 - 2019, Fundamental Research Grant Scheme (FRGS), (National)
-
Design, development, fabrication and testing a portable modular Electrical Discharge Machining (EDM) machine for macro and micro EDM application, Principal Investigator(PI), 2015 - 2017, Prototype Research Grant Scheme (PRGS), (National)
-
Development Of An Optimal Method For Energy Efficient Manufacturing Process Selection, Principal Investigator(PI), 2015 - 2019, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC)), (University)
-
DESIGN, DEVELOPMENT AND FABRICATION OF A METAL
INJECTION MOLDING MACHINE FOR MICRO METAL PARTS:
PART FABRICATION, Co-Investigator, 2013 - 2013, Geran Penyelidikan Universiti Malaya (UMRG), (University)
-
Prediction Of Fatigue Of Titanium Copper Ticu (Nkt322 Esh) Battery Contact Considering Its Residual Stress, Principal Investigator(PI), 2013 - 2015, Postgraduate Research Grant (PPP) - Research, (National)
-
Warm Deep Drawing Of Round And Square Shape For Improved Quality And Performance, Principal Investigator(PI), 2013 - 2017, Fundamental Research Grant Scheme (FRGS), (National)
-
Metal Injection Technique And Mold Fabrication, Principal Investigator(PI), 2012 - 2015, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC)), (University)
-
MAGNETIC FIELD INDUCED MACHINING OF FERROMAGNETIC MATERIALS FOR IMPROVED PERFORMANCE, Principal Investigator(PI), 2011 - 2013, Fundamental Research Grant Scheme (FRGS), (National)
-
MAGNETIC FIELD INDUCED MACHINING OF FERROMAGNETIC
MATERIALS FOR IMPROVED PERFORMANCE, Principal Investigator(PI), 2011 - 2013, Fundamental Research Grant Scheme (FRGS), (National)
-
DESIGN AND MANUFACTURE OF MICRO MOLD FOR PLASTIC
INJECTION MOLDING OF MEDICAL COMPONENT, Principal Investigator(PI), 2009 - 2010, Geran Penyelidikan Universiti Malaya (UMRG), (National)
-
DESIGN AND MANUFACTURE OF MICRO MOLD FOR PLASTIC INJECTION MOLDING OF MEDICAL COMPONENT, Principal Investigator(PI), 2009 - 2011, Geran Penyelidikan Universiti Malaya (UMRG), (National)
-
Metal Working
-
Micro Machining
-
DEVELOPMENT OF MICRO HYBRID PUNCHING-DRILLING
PROCESS AND FABRICATION OF MICRO HYBRID
PUNCHING-DRILLING PRESS MACHINE, Principal Investigator(PI), 2007 - 2008, Geran Penyelidikan Universiti Malaya (UMRG), (National)
-
MACHINABILITY STUDY AND DEVELOPMENT OF COMPUTER
AIDED MACHINING (CAM) PROGRAM FOR MICRO MILING
OPERATION, Principal Investigator(PI), 2006 - 2007, Fundamental Research Grant Scheme (FRGS), (National)
-
MACHINABILITY STUDY AND DEVELOPMENT OF COMPUTER AIDED MACHINING (CAM) PROGRAM FOR MICRO MILING OPERATION, Principal Investigator(PI), 2006 - 2007, Fundamental Research Grant Scheme (FRGS), (National)
AWARDS AND RECOGNITIONS
(Name of Award), (Awarding Institution), (Year Awarded), (Level).
- Shell Eco Marathon 2017, Shell, 2017, (International)
- Pecipta17, Kpt, 2017, (National)
- Itex 2016 - Gold, Minds, 2016, (International)
- Malaysia Technology Expo (Mte2016) - Gold, Malaysia Association of Research Scientists, 2016, (National)
- Certificate of Excellent Service, University Malaya, 2016, (University)
- Excellence Service Award, University Malaya, 2015, (University)
- Icompex 2015, Ministry of Education, Polimas, 2015, (National)
- Malaysia Technology Expo (Mte2014), Malaysia Association of Research Scientists, 2014, (International)
- Um Excellence Award, Naib Canselor, 2013, (University)
- Anugerah Cemerlang Universiti Malaya 2013, Universiti Malaya, 2013, (University)
- Persidangan & Ekspo Ciptaan Institusi Pengajian Tinggi Antarabangsa (Pecipta 13), Kpm, 2013, (National)
EXPERT/TECHNICAL CONTRIBUTIONS
(Activity), (Organisation), (Role), (From)-(Until), (Level).
- Panel Verifikasi Soalan Peperiksaan Akhir, ADTEC Shah Alam, Committee Member, 2012-2012, (National)
- Pegawai Penilai Persembahan Projek Akhir, ADTEC Shah Alam, Committee Member, 2012-2012, (National)
CONTRIBUTION TO SOCIETY
(Contribution To Society), (Level), (Start Date), (End Date).
- Pegawai Penilai Persembahan Akhir ADTEC SHAH ALAM , (Government), 23/09/2014 until 23/12/2014
- Jawatankuasa Penasihat Teknikal (TAC) Jabatan Tenaga Manusia (JTM), (Government), 28/08/2014 until 28/08/2016
- Pegawai Penilai Persembahan Akhir ADTEC SHAH ALAM, (Government), 21/05/2014 until 21/05/2014
- Panel Verifikasi Soalan Peperiksaan Akhir ADTEC SHAH ALAM, (Government), 27/02/2014 until 28/02/2014
- Mesyuarat Ahli Jawatankuasa Teknikal Bagi Welding and Allied Processes, (National), 29/10/2012 until
- Ahli Jawatankuasa Penasihat Teknikal, Jabatan Tenaga Manusia, Kementerian Sumber Manusia, (Government), 09/04/2012 until 09/04/2014
- TC 44 Welding and Allied Process, Standard Malaysia, (National), 27/05/2002 until 25/05/2020
SUPERVISION
FIRST DEGREE/DIPLOMA/PRE-DEGREE
(Course Title), (Academic Session), (No. of Candidates)
Ongoing
- Study the effects of injection molding parameter on the weld lines strength, 2012/2013, 1
- Design and Development of a Tensile and Izod specimen mold for micro metal injection molding, 2012/2013, 1
- Fabrication of micro holes using RC Type EDM pulse generator, 2012/2013, 1
- Study the effect of mold temperature on aluminum and steel deep drawing, 2012/2013, 1
POST GRADUATE STUDENT
(Name of Degree), (Name of Candidates), (Title of Thesis), (Academic Session)
Ongoing
- Master Degree, Muhammad Basril Bin Muhammad Asri, EFFECT OF TEMPERATURE ON DEEP DRAWING PROCESS, 2019/2020
- Master Degree, Morshed Alam, Manufacturing, 2012/2013