Curriculum Vitae

ASSOCIATE PROF. DR. SHAIFULAZUAR BIN ROZALI

Associate Professor
  • Department of Mechanical Engineering
    Faculty of Engineering
  • azuar
  • 03-79676873
  • 0196609974

AREAS OF EXPERTISE


  • MICROWAVE TECHNOLOGY
    Pyrolysis
  • NANO MATERIALS
    Nanocarbon, Graphene, Carbon Nanotube
  • CORROSION FATIGUE
    Corrosion, Fatigue
  • POWDER METALLURGY
  • CORROSION SCIENCE AND ENGINEERING
    Fracture in corrosive environment
  • ELECTRONIC MATERIALS
    Solder Materials, Gas Sensor Materials, Electroceramics
  • COMPOSITE MATERIALS
    Metal Matrix Composite, Polymer Matrix Composite

ACADEMIC QUALIFICATION


  • D.Eng (2011)(JAPAN), (KEJURUTERAAN BAHAN)
    The Technological University of Nagaoka
  • MENG (2003) (JAPAN), (KEJURUTERAAN MEKANIKAL)
    Ehime University, Japan
  • BENG(2001) (JAPAN), (KEJURUTERAAN MEKANIKAL)
    Ehime University, Japan

ADMINISTRATIVE DUTIES


  • Chairman
    16 Jan 2023 - 31 Dec 2024 (Faculty)
  • Coordinator
    01 Oct 2022 - 31 Mar 2024 (Department)
  • Committee Members
    01 Sep 2021 - 31 Dec 2023 (Department)
  • Academic Advisor for Faculty of Engineering, University Malaya
    03 May 2019 - 30 Jun 2023 (Faculty)
  • Committee Members
    10 Jan 2022 - 31 Mar 2023 (Department of Mechanical Engineering, Faculty of Engineering)
  • Task Force Member
    31 Mar 2022 - 31 Mar 2023 (University Malaya)
  • Coordinator
    20 Jan 2016 - 31 Dec 2022 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Members
    01 Oct 2021 - 30 Sep 2022 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee of Asset Receiving Officer for Faculty of Engineering, University Malaya
    03 Sep 2019 - 30 Aug 2021 (Faculty)
  • Coordinator
    20 Feb 2020 - 20 Aug 2021 (Faculty)
  • Coordinator for Mobility Program UM -Ehime University Japan (Penyelaras Mobiliti UM -Ehime University Japan)
    01 Jan 2018 - 31 Dec 2020 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Member of Laboratories Development at Faculty of Engineering, University Malaya
    27 Mar 2019 - 31 Dec 2020 (Faculty)
  • Ahli Jawatankuasa Kurikulum Jabatan (Ijazah Pertama) Fakulti Kejuruteraan Universiti Malaya - Program Sarjana Muda Kejuruteraan Bahan
    12 Jul 2018 - 31 Dec 2020 (Faculty)
  • Represenative of Faculty of Engineering University Malaya STEM Centre
    01 Dec 2018 - 30 Nov 2019 (University Malaya)
  • Resource Person for EAC SAR Report
    01 Dec 2018 - 31 Dec 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Internship Supervisor for Faculty of Engineering (Penyelia Latihan Industri Fakulti Kejuruteraan)
    08 Aug 2018 - 31 Dec 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Chairman Jawatankuasa Penambahbaikan Fasiliti dan Amali Makmal Kejuruteraan Mekanik
    01 Jul 2018 - 31 Dec 2018 (Department of Mechanical Engineering, Faculty of Engineering)
  • Academic Advisor
    01 Nov 2016 - 31 Dec 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Committee Members JAWATANKUASA KESELAMATAN DAN KESIHATAN PEKERJAAN (JKKP), FAKULTI KEJURUTERAAN
    01 Jan 2017 - 31 Dec 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • Chairman
    01 Sep 2016 - 31 Aug 2017 (Department of Mechanical Engineering, Faculty of Engineering)
  • PANEL PENILAI PERSIDANGAN KEBANGSAAN STAF KUMPULAN PROFESIONAL & PELAKSANA UNIVERSITI-UNIVERSITI DALAM KEJURUTERAAN 2017
    02 Aug 2017 - 02 Aug 2017 (National)
  • Pemeriksa Peperiksaan Perkhidmatan Bagi Tujuan Pengesahan Dalam Perkhidmatan - Skim Penolong Jurutera Gred JA29
    29 May 2017 - 29 May 2017 (University Malaya)
  • Deputy Director Makmal Sains Bahan ISO 17025
    17 Aug 2015 - 17 Aug 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Ahli Jawatankuasa Keselamatan dan Kesihatan Pekerjaan, Fakulti Kejuruteraan
    01 Aug 2014 - 31 Jul 2016 (Deputy Dean (Development) Office, Faculty of Engineering)
  • Resource Person for the EAC Task Force
    14 Apr 2015 - 30 Jun 2016 (Department of Mechanical Engineering, Faculty of Engineering)
  • Programme Coordinator
    18 Aug 2014 - 31 Dec 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Jawatankuasa Semakan Kurikulum
    19 Aug 2014 - 31 Dec 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Ahli Jawatankuasa Pengajian Mahasiswa
    18 Aug 2014 - 31 Dec 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Jawatankuasa Pemilihan Kemasukan Bagi Program Sarjana Muda Kejuruteraan Universiti Malaya
    06 Feb 2015 - 31 Dec 2015 (University Malaya)
  • Acting Head of Department
    17 Dec 2015 - 18 Dec 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Acting Head of Department
    30 Oct 2015 - 06 Nov 2015 (Department of Mechanical Engineering, Faculty of Engineering)
  • Acting Head of Department
    18 Feb 2015 - 27 Feb 2015 (Department of Mechanical Engineering, Faculty of Engineering)

MEMBERSHIPS


  • KEAHLIAN MAJLIS PROFESOR NEGARA DENGAN NO. KEAHLIAN:MPN01579, MEMBER
    Since 2022 (National)
  • INTERNATIONAL ORGANIZATION INTERNATIONAL ORGANIZATION FOR STANDARDIZATION, EXPERT PANEL MEMBER
    Since 2020 (International)
  • INSTITUTE OF MECHANICAL ENGINEERS, UK, CHARTERED ENGINEER
    Since 2020 (International)
  • THE INSTITUTION OF ENGINEERS MALAYSIA, MEMBER
    Since 2006 (National)
  • BOARD OF ENGINEERS MALAYSIA, REGISTERED MEMBER
    Since 2005 (National)
  • INSTITUTE OF MATERIALS MALAYSIA, MEMBER
    Since 2005 (National)
  • MEMBER OF CENTRE OF ADVANCED MATERIALS, MEMBER
    2022 to 2022 (University)
  • METALLIC MATERIALS AND SEMI-FINISHED PRODUCTS COMMITTEE, STANDARDS MALAYSIA, COMMITTEE MEMBER
    2015 to 2022 (National)

AWARD AND STEWARDSHIP


  • CERTIFICATE OF EXCELLENT SERVICE
    University of Malaya, 2023 (University)
  • PEMRIKSA PEPERIKSAAN PERKHIDMATAN BAGI TUJUAN PENGESAHAN DALAM JAWATAN
    Faculty of Engineering, University Malaya, 2020 (University)
  • Penilai Geran Penyelidikan Fakulti (GPF) 2020
    Fakulti Kejuruteraan, Universiti Malaya, 2020 (Ptj/ Faculty)
  • Invited Speaker at 2nd ASEAN - Japan Meeting Point of Collaboration by Stakeholders and Researchers for Reducing Environmental Problems in ASEAN Countries
    ASEAN- Japan Network for Transdisciplinary Research and Practice for Reducing Environmental Problems (TRNEP), 2019 (International)
  • MENTOR for Beyond Engineering Innovation (BEGIN) Challenge 2018
    University Malaya, 2018 (National)
  • Judge for Beyond Engineering Innovation (BEGIN) Challenge 2018
    University Malaya, 2018 (National)
  • Consultation for Analysis of Dots Spotted on Vehicle?s Bonnet Cover
    Tan Chong Motors Sdn Bhd, 2017 (Private)
  • EXCELLENCE SERVICE AWARD
    University of Malaya, 2016 (University)
  • UM EXCELLENCE AWARD
    NAIB CANSELOR, 2011 (University)
  • Japanese Government Monbukagakusho Scholarship for Doctoral Course (PhD) study in Nagaoka University of Technology, Japan (2007-2010).
    Ministry of Education, Culture, Sports, Science, and Technology, Japan, 2007 (International)
  • CERTIFICATE OF EXCELLENT SERVICE
    University of Malaya, 2006 (University)
  • CERTIFICATE OF EXCELLENT SERVICE
    University of Malaya, 2005 (University)
  • Japanese Government Monbukagakusho Scholarship for Master Course study in Ehime University Japan (2001-2003).
    Ministry of Education, Culture, Sports, Science, and Technology, Japan, 2001 (International)
  • Hatakeyama Prize
    Japanese Society of Mechanical Engineers , JSME, 2001 (National)
  • Japanese Government Monbukagakusho Scholarship for Bachelor Degree study in Ehime University Japan (1997-2001).
    Ministry of Education, Culture, Sports, Science, and Technology, Japan, 1997 (International)

PUBLICATIONS


Article in Journal
WoS
  1. Yusof, Nabilah Mohammad; Rozali, Shaifulazuar; Ibrahim, Suriani; Siddick, Siti Zubaidah (2023). Synthesis of hybridized fireworks-like go-Co3O4 nanorods for acetone gas sensing applications, MATERIALS TODAY COMMUNICATIONS. 35. doi:10.1016/j.mtcomm.2023.105516
  2. Hanafi, Nur Hasniza Mohd; Rozali, Shaifulazuar; Ibrahim, Suriani (2022). A review of the application of microwave-metal interactions on the microwave-metal-assisted pyrolysis (MMAP), BIOMASS CONVERSION AND BIOREFINERY. . doi:10.1007/s13399-022-03364-6
  3. Jaffery, Syed Hassan Abbas; Sabri, Mohd Faizul Mohd; Rozali, Shaifulazuar; Hasan, Syed Waqar; Mahdavifard, Mohammad Hossein; AL-Zubiady, Dhafer Abdul-ameer Shnawah; Ravuri, Balaji Rao (2022). Oxidation and wetting characteristics of lead-free Sn-0.7Cu solder alloys with the addition of Fe and Bi, MICROELECTRONICS RELIABILITY. 139. doi:10.1016/j.microrel.2022.114802
  4. Mohammad Yusof, Nabilah; Ibrahim, Suriani; Rozali, Shaifulazuar (2022). Advances on graphene-based gas sensors for acetone detection based on its physical and chemical attributes, JOURNAL OF MATERIALS RESEARCH. 37(2), 405-423. doi:10.1557/s43578-021-00456-3
  5. Putra, Putri Humairah Monashofian; Rozali, Shaifulazuar; Abdul Patah, Muhamad Fazly; Idris, Aida (2022). A review of microwave pyrolysis as a sustainable plastic waste management technique, JOURNAL OF ENVIRONMENTAL MANAGEMENT. 303. doi:10.1016/j.jenvman.2021.114240
  6. Zakaria, Nurul Zariah Jakaria; Rozali, Shaifulazuar; Mubarak, Nabisab Mujawar; Ibrahim, Suriani (2022). A review of the recent trend in the synthesis of carbon nanomaterials derived from oil palm by-product materials, BIOMASS CONVERSION AND BIOREFINERY. . doi:10.1007/s13399-022-02430-3
  7. Arafat, M. M., Dinan, B., Haseeb, A., Akbar, S. A., Rahman, B. M. A., Rozali, S., & Naher, S. (2021). Growth of 1D TiO2 nanostructures on Ti substrates incorporated with residual stress through humid oxidation and their characterizations. Nanotechnology, 32(47), 17. doi: 10.1088/1361-6528/ac1d77
  8. Mansoor, M. A., Hamzah, K., Naeem, R., Zubir, M., Yahaya, N. A., Yusof, F. B., . . . Ming, H. N. (2021). A Tri-Metallic (Mn-Co-Ti) Oxide Photoanode with Improved Photo-Conversion Efficiency. Russian Journal of Inorganic Chemistry, 66(6), 806-813. doi: 10.1134/s0036023621060139
  9. Arafat, M. M., Rozali, S., Haseeb, A., & Ibrahim, S. (2020). Direct and catalyst-free synthesis of ZnO nanowires on brass by thermal oxidation. Nanotechnology, 31(17), 13. doi: 10.1088/1361-6528/ab69b3
  10. Zain, N. F., Rozali, S., Mohamad, M., Izam, T. M. N., Sabri, M., Mohamed, N. S., . . . Salleh, F. (2020). Improvement of electrical conductivity of PEMA film by incorporating EMITFSI and carbon based nanofiller. Organic Electronics, 78, 6. doi: 10.1016/j.orgel.2019.105562
  11. Mandavifard, M. H., Sabri, M. F. M., Said, S. M., Rozali, S. (2019). High stability and aging resistance Sn-1Ag-0.5Cu solder alloy by Fe and Bi minor alloying. Microelectronic Engineering, 208, 29-38. doi:10.1016/j.mee.2019.01.011
  12. Hosseini, M., Abdelrazek, A. H., Sadri, R., Mallah, A. R., Kazi, S. N., Chew, B. T., . . . Yusoff, N. (2018). Numerical study of turbulent heat transfer of nanofluids containing eco-friendly treated carbon nanotubes through a concentric annular heat exchanger. International Journal of Heat and Mass Transfer, 127, 403-412. doi:10.1016/j.ijheatmasstransfer.2018.08.040
  13. Rozali, S., Mutoh, Y., Nagata, K. (2011). Effect of frequency on fatigue crack growth behavior of magnesium alloy AZ61 under immersed 3.5 mass% NaCl environment, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 5286(2509-2516), Article
Scopus
  1. Yusof N.M., Rozali S., Ibrahim S., Siddick S.Z. (2023). Synthesis of hybridized fireworks-like go-Co3O4 nanorods for acetone gas sensing applications, Materials Today Communications. 35. doi:10.1016/j.mtcomm.2023.105516
  2. Jaffery S.H.A., Sabri M.F.M., Rozali S., Hasan S.W., Mahdavifard M.H., AL-Zubiady D.A.-A.S., Ravuri B.R. (2022). Oxidation and wetting characteristics of lead-free Sn-0.7Cu solder alloys with the addition of Fe and Bi, Microelectronics Reliability. 139. doi:10.1016/j.microrel.2022.114802
  3. Mohammad Yusof N., Ibrahim S., Rozali S. (2022). Advances on graphene-based gas sensors for acetone detection based on its physical and chemical attributes, Journal of Materials Research. 37(2), 405-423. doi:10.1557/s43578-021-00456-3
  4. Putra P.H.M., Rozali S., Patah M.F.A., Idris A. (2022). A review of microwave pyrolysis as a sustainable plastic waste management technique, Journal of Environmental Management. 303. doi:10.1016/j.jenvman.2021.114240
  5. Yusof N.M., Ibrahim S., Rozali S. (2022). Synthesis of graphene oxide-cobalt oxide hybrid materials for gas sensors application, Materials Today: Proceedings. 66, 2680-2684. doi:10.1016/j.matpr.2022.06.494
  6. Zakaria N.Z.J., Rozali S., Mubarak N.M., Khalid M. (2022). Synthesis of magnetic nanocarbon using palm oil as the green precursor via microwave-assisted arc for wastewater treatment, Scientific Reports. 12(1). doi:10.1038/s41598-022-21982-y
  7. Mansoor, M. A., Hamzah, K., Naeem, R., Zubir, M. N. B. M., Yahaya, N. A., Yusof, F. B., . . . Ming, H. N. (2021). A Tri-Metallic (Mn Co Ti) Oxide Photoanode with Improved Photo-Conversion Efficiency. Russian Journal of Inorganic Chemistry, 66(6), 806-813. doi: 10.1134/S0036023621060139
Others
  1. Arafat, M.M., Rozali, S., Haseeb, A.S.M.A., Ibrahim, S. (2020). Direct and catalyst-free synthesis of ZnO nanowires on brass by thermal oxidation. Nanotechnology, 31(17), 175603.
  2. Ibrahim, S., Jakaria@Zakaria, N.Z., Rozali, S., Ghazali, N.N.N., Karim, M.S.A., Sabri, M.F.M.. (2020). Biosynthesis of Copper Oxide Nanoparticles Using Camellia Sinensis Plant Powder. Lecture Notes in Mechanical Engineering, 233-238.
  3. Jeffree A.I., Karman S., Ibrahim S., Karim M.S.A., Rozali S. (2020) Biosensors Approach for Lung Cancer Diagnosis A Review. In: P. P. Abdul Majeed A., Mat-Jizat J., Hassan M., Taha Z., Choi H., Kim J. (eds) RITA 2018. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-13-8323-6_36
  4. NA Ahmad, S Rozali, MFM Sabri, CY Chee, S Ibrahim, Enhancement of Miscibility and Thermal Properties of Linear Low Density Polyethylene (LLDPE)/Polysulfone (PSU) Polymer Blends by Functionalization of LLDPE, Key Engineering Materials 796, 22-29 (2019)
  5. S Ibrahim, L Qi, S Rozali, NNN Ghazali, TZT Zaharinie, MFM Sabri, Preparation and Characterization of Carbon Nanospheres Using Sugar as a Precursor, Key Engineering Materials, 796, 11-16, 2019
  6. F Fitriani, SM Said, S Rozali, MFM Salleh, MFM Sabri, BD Long, T Nakayama, O Raihan, MMI Megat Hasnan, MBA Bashir & F Kamal, Enhancement of Thermoelectric Properties in Cold Pressed Nickel Doped Bismuth Sulfide Compounds, Electron. Mater. Lett. doi:10.1007/s13391-018-0072-8 (2018)
  7. MH Mahdavifard, MFM Sabri, SM Said, IA Badruddin, S Rozali, Effect of aging on mechanical properties of Sn-Cu-Fe-Bi solder alloy, Solid State Science and Technology, 26, 1, p. 70-77, (2018)
  8. Maryam Hosseini, Ali H. Abdelrazek, Rad Sadri, A.R. Mallah, S.N. Kazi, B.T. Chew, Shaifulazuar Rozali, Nukman Yusoff. (2018). Numerical study of turbulent heat transfer of nanofluids containing ecofriendly treated carbon nanotubes through a concentric annular heat exchanger. International Journal of Heat and Mass Transfer 127 (2018) 403 412.
  9. Mohd Zakuan Zabri, Shaifulazuar Rozali, Nor Afifah Yahaya, Siti Shafiah Shazali. Effects of functionalized carbon nanofillers on the spectral selectivity behavior of aluminum nanocomposites for solar absorber applications. Materials Chemistry and Physics, 2018, Vol. 212, 196-207
  10. O Raihan, SM Said, MFM Sabri, S Rozali, BD Long, K Kimura, K Tobita, F Fitriani, MFM Salleh, MBA Bashir, Parametric analysis of ball milling condition on thermoelectric performance of Bi0. 6FeCo3Sb12 skutterudite, Materials Research Express, (2018)
  11. SS Shazali, A Amiri, MNM Zubir, S Rozali, MZ Zabri & MFM Sabri, Colloidal stability measurements of graphene nanoplatelets covalently functionalized with tetrahydrofurfuryl polyethylene glycol in different organic solvents, Current Applied Physics. doi: 10.1016/j.cap.2017.10.007 (2018)
  12. SS Shazali, S Rozali, A Amiri, MNM Zubir, MFM Sabri & MZ Zabri, Evaluation on stability and thermophysical performances of covalently functionalized graphene nanoplatelets with xylitol and citric acid, Materials Chemistry and Physics, 212, pp: 363-371, doi:10.1016/j.matchemphys.2018.03.040 (2018)
  13. Ahmad Amiri, Mohd Nashrul Mohd Zubir, Ayrat M Dimiev, KH Teng, Mehdi Shanbedi, SN Kazi, Shaifulazuar Bin Rozali, Facile, Environmentally Friendly, Cost Effective and Scalable Production of Few-Layered Graphene. Chemical Engineering Journal, 2017, Elsevier.
  14. Amiri, A., Shanbedi, M., Ahmadi, G., Rozali, S. (2017). Transformer oils-based graphene quantum dots nanofluid as a new generation of highly conductive and stable coolant. International Communications in Heat and Mass Transfer 83. pp. 40-47
  15. Md Arafat Hossain, Poo Balan Ganesan, Shanti Chandran Sandaran, Shaifulazuar Bin Rozali, Sivakumar Krishnasamy. (2017).Catalytic microwave pyrolysis of oil palm fiber (OPF) for the biochar production. Environmental Science and Pollution Research, pp 1 13. https://doi.org/10.1007/s11356-017-0241-6
  16. Shazali, S. S., Amiri, A., Zubir, M. N. M., Rozali, S., Zabri, M. Z., Sabri, M. F. M., & Soleymaniha, M. (2017). Investigation of the thermophysical properties and stability performance of non-covalently functionalized graphene nanoplatelets with Pluronic P-123 in different solvents. Materials Chemistry and Physics.
  17. HA Jaffery, MFM Sabri, S Rozali, MH Mahdavifard, DA Shnawah, Effect of temperature and alloying elements (Fe and Bi) on the electrical resistivity of Sn 0.7Cu solder alloy, DOI: 10.1039/C6RA08706J, RSC Adv., 2016, 6, 58010-58019 (2016)
  18. Hamed Khajeh Arzani, Ahmad Amiri, Hamid Khajeh Arzani, Shaifulazuar Bin Rozali, S. N. Kazi, A. Badarudin. Toward improved heat transfer performance of annular heat exchangers with water/ethylene glycol-based nanofluids containing graphene nanoplatelets. Journal of Therm And Calorim 2016. Vol. 125 (1), pp.1-10.
  19. Jing Lang Choh,Yern Chee Ching, Seng Neon Gan, Shaifulazuar Rozali, Sabariah Julai. 2016. Effects of Oil Palm Empty Fruit Bunch Fiber on Electrical and Mechanical Properties of Conductive Filler Reinforced Polymer Composite. BioResources 11(1): 913-928.
  20. M. H. Mahdavifard, M. F. M. Sabri, S. M. Said, A. Shnawah, I. A. Badruddin, S. Rozali. Effects of Fe and Bi Minor Alloying on Mechanical, Thermal, and Microstructural Properties of Sn-0.7Cu Solder Alloy. Journal of Electronic Materials. July 2016, Volume 45, Issue 7, pp 3673 3682
  21. Yin Yin Yee, Yern Chee Ching, Shaifulazuar Rozali, Nur Awanis Hashim, Ramesh Singh. Preparation and Characterization of Poly(lactic Acid)-based Composite Reinforced with Oil Palm Empty Fruit Bunch Fiber and Nanosilica. BioResources, 2016, 11(1), pp. 2269-2286
  22. M.H. Mahdavifard, M.F.M. Sabri,D.A. Shnawaha, S.M. Saidb, I.A. Badruddina, S. Rozali. 2015, The effect of iron and bismuth addition on the microstructural, mechanical, and thermal properties of Sn 1Ag 0.5Cu solder alloy. Microelectronics Reliability 55 (2015) 1886-1890
  23. MH Mahdavifard, MFM Sabri, DA Shnawah, SM Said, IA Badruddin, S Rozali, The effect of iron and bismuth addition on the microstructural, mechanical, and thermal properties of Sn 1Ag 0.5 Cu solder alloy, Microelectronics Reliability, doi:10.1016/j.microrel.2015.06.134, (2015)
  24. Nguyen, S.T., Nakayama, T., Rozali, S.B., Suematsu, H., Suzuki, T., Jiang, W., Amarume, S., He, L., Niihara, K., Developing yttria-based ceramics having high liquid metal corrosion resistance, Ceramic Transactions (2014), Volume 250, pp. 53-63
  25. Hong-Baek Cho, Son Thanh Nguyen, Tadachika Nakayama, Minh Triet Tan Huynh, Hisayuki Suematsu, Tsuneo Suzuki, Weihua Jiang, Shaifulazuar Bin Rozali, Yoshinori Tokoi, Yeung-Ho Park, Koichi Niihara, "Oxidation of nanodiamonds and modulation of their assembly in polymer-based nanohybrids by field- inducement", Journal of Materials Science, June 2013, Volume 48, Issue 12, pp 4151-4162.
  26. Shaifulazuar Rozali, Yoshiharu Mutoh, Kohsoku Nagata, Effect of Stress Ratio on Fatigue Crack Growth Behavior of Magnesium Alloy AZ61 Under 3.5mass% NaCl Spray Environment , Journal of Solid Mechanics and Materials Engineering,2009, 12(3), pp.1274-1284.
  27. Iswadi Jauhari, Shaifulazuar Rozali, Nik Rozlin Nik Masdek, Ogiyama Hiroyuki, Surface Properties And Activation Energy Analysis For Superplastic Carburizing Of Duplex Stainless Steel, Materials Science and Engineering A, Vol.466, Issue 1-2 (2007), 230 234.
  28. Mohd Yusof, H.A., Jauhari, I., Rozali, S., Hiroyuki, O. , "Effect of powder particle sizes on the development of ultra hard surface through superplastic boronizing of duplex stainless steel" Key Engineering Materials, Vols. 345-346 (2007) pp. 601-604.
  29. H. A. M. Yusof, I. Jauhari, S. Rozali and O. Hiroyuki, Effect Of Surface Roughness, Powder Size And Pressure On Superplastic Boronizing Of Duplex Stainless Steel, Proceeding of Asian Symposium on Materials and Processing (ASMP) 2006, Bangkok Thailand, 9-10 Nov 2006.
  30. M.S Faizul, J Sabariah, R Shaifulazuar, R Saidur, Microstructure and Mechanical Properties of Sintered Zirconia Produced by Injection Moulding Process, International Journal of Mechanical and Materials Engineering (IJMME), Malaysia, vol.1 2006 , No.2, 95- 99.
  31. Rafidah Hasan, Iswadi Jauhari and R. Shaifulazuar, Surface Properties And Kinetics Of Boronized Duplex Stainless Steel, International Journal of Mechanical and Materials Engineering, Malaysia, vol.1 2006
  32. Zainul Huda, Mohammad Saufi and Shaifulazuar, Mechanism of Grain Growth in An Aerospace Aluminum Alloy, Journal of Industrial Technology, SIRIM Malaysia, 2006, 15(2), 127-136.
  33. R. Shaifulazuar, The Effect of Chemical Treatment of Coir Fiber on the Properties of Coir Fiber Reinforced Polypropylene Composites, Proceeding of the International Conference on Recent Advances in Mechanical and Materials Engineering 2005, Kuala Lumpur
  34. Iswadi Jauhari, Ogiyama Hiroyuki, Hitoshi Tsukuda, Shaifulazuar Rozali and Rafidah Hasan, Solid state diffusion bonding of superplastic duplex stainless steel with similar alloy and carbon in preparation 2004 Presented at International Materials Technology Conference and Exhibition (IMTCE2004), Kuala Lumpur (2004).
  35. Iswadi Jauhari, Ogiyama Hiroyuki, Hitoshi Tsukuda and Shaifulazuar Rozali, Bonding mechanism for solid state bonding of superplastic (a+?) duplex stainless steel, Presented at 4th Meeting of Japanese Materials Society Shikoku Branch in Kochi University of Technology, Sept. 2003.
  36. Iswadi Jauhari, Ogiyama Hiroyuki, Hitoshi Tsukuda and Shaifulazuar Rozali, Solid state bonding of superplastic (a+?) duplex stainless steel with carbon steel, Presented at 46th Meeting of Japanese Art and Technology Univ. in Kyoto University, Sept. 2002.
Chapter in Books
  1. Taib M.M., Ibrahim S., Rozali S. (2021) Structural and Electrical Properties of Graphene Oxide/Nickel Oxide Based Polymer Nanocomposite. In: Osman Zahid M.N., Abdul Sani A.S., Mohamad Yasin M.R., Ismail Z., Che Lah N.A., Mohd Turan F. (eds) Recent Trends in Manufacturing and Materials Towards Industry 4.0. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-9505-9_86
Article in Proceeding
WoS
  1. Yusof, Nabilah Mohammad; Ibrahim, Suriani; Rozali, Shaifulazuar (2022). Synthesis of graphene oxide-cobalt oxide hybrid materials for gas sensors application, MATERIALS TODAY-PROCEEDINGS. 66, 2680-2684. doi:10.1016/j.matpr.2022.06.494
Scopus
  1. Arafat M.M., Haseeb A.S.M.A., Rozali S., Brabazon D., Rahman B.M.A., Grattan K.T.V., Naher S. (2022). Synthesis of ZnO and CuO Nanowires by Thermal Oxidation on Metallic Substrates, Key Engineering Materials. 926 KEM, 1703-1712. doi:10.4028/p-qvfxm2
  2. Babalghaith, A. M., Koting, S., Ibrahim, M. R., Mohd, N. S., Rozali, S., Muhamad, M. R., . . . Yusoff, N. I. M. (2021). Effect of Black PET Fiber as Additive on the Mechanical Properties of Stone Mastic Asphalt (SMA) Mixtures. 139 LNCE, 249-260. doi: 10.1007/978-981-33-6560-5_26
  3. Taib, M. M., Ibrahim, S., & Rozali, S. (2021). Structural and Electrical Properties of Graphene Oxide/Nickel Oxide Based Polymer Nanocomposite. 46, 981-990. doi: 10.1007/978-981-15-9505-9_86

RESEARCH INTEREST


  • Superplasticity and Diffusion Bonding
  • Solar Absorber (Nano texturing, composite solar absorber materials)
  • Thermoelectric (Thermoelectric materials)
  • Graphene for Engineering Applications (Graphene)
  • Waste to Wealth: Conversion of Plastic Waste into Fuel (Pyrolysis, Plastic waste)
  • Corrosion Fatigue (Corrosion, Fatigue, Crack Growth)

RESEARCH PROJECT


National
  1. 2022 - 2024, Others MOHE - Top 100 (IIRG)-IISS
    Development Of Macrocapsule Biopolymer Loaded With Bacteriophage Using Layer-by-layer Technique ( Co-Researcher)
  2. 2022 - 2024, Others MOHE - Top 100 (IIRG)-IISS
    WP2: Towards Sustainable River Management: Nano Photo-Reduction, Biodecompose and Engineered Catalytic Depolymerization Methods on Treatment of Solid and Liquid River Wastes ( Co-Researcher)
  3. 2019 - 2022, Fundamental Research Grant Scheme (FRGS)
    Correlations Between Processing Parameters And Graphene Formation From Vegetable Oils Under Simple Step Microwave Assisted Arc In Liquid Method ( Principal Investigator(PI))
  4. 2019 - 2022, Others MOHE - Top 100 (IIRG)-IISS
    Innovative Approach In Converting Mixed Plastic Waste Into Fuel Via Microwave Assisted Spark Pyrolysis Process To Increase Efficency And Yield ( Principal Investigator(PI))
  5. 2019 - 2022, Others MOHE - Top 100 (IIRG)-IISS
    Relation On Characterization Of Activated Carbon Derived From Plastic Waste Char With Its Potential Application In Cr(vi) Remediation ( Co-Researcher)
  6. 2019 - 2022, Others MOHE - Top 100 (IIRG)-IISS
    Mathematical Model For Fatigue Failure In Rubber Under Variable Amplitude Loading ( Co-Researcher)
  7. 2019 - 2022, Others MOHE - Top 100 (IIRG)-IISS
    Development Of Acetone Sensor Based On Hybrid Polypyrrole-zinc Oxide ( Co-Researcher)
  8. 2019 - 2022, Others MOHE - Top 100 (IIRG)-IISS
    Graphene Based Human Breath Analyzing Sensors For Early Detaction Of Diabetes ( Co-Researcher)
  9. 2018 - 2021, RU Geran - Fakulti Program
    Development Of Nanostructured Chalcogenide Thermoelectric Materials By Electrodeposition ( Co-Researcher)
  10. 2018 - 2021, RU Geran - Fakulti Program
    Fundamental Investigation Of Ultraviolet Protection And Self-cleaning Abilities Of Nanocomposite Polymer Film For Self-powered Smart Window Application ( Co-Researcher)
  11. 2018 - 2021, RU Geran - Fakulti Program
    Fundamnetal Investigation On Basic Parameters In Producing Nanocarbon Materials From Vegetable Oils Via Novel Simple Step Arc In Liquid Method. ( Principal Investigator(PI))
  12. 2019 - 2020, Government Agency
    Investigation of Physical and Chemical Interfacial Properties for Fourth Element Added SAC Solder using Micro Solder Balls ( Co-Researcher)
  13. 2018 - 2020, RU Geran
    Development Of Smart System With Sensor For Production Output Monitoring ( Principal Investigator(PI))
  14. 2015 - 2019, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC))
    Determination, Optimization And Fabrication Of Nano-textures On Solar Absorber Surface For Spectral Selectivity ( Principal Investigator(PI))
  15. 2015 - 2019, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC))
    Improvement Of The Machinability In Edm Machining Using New Technology Of Coated Wire Edm ( Co-Researcher)
  16. 2015 - 2019, Postgraduate Research Grant (PPP) - Research
    Development Of Electrospun Biopolymer Based Thermoelectric Materials As Waste Heat Energy Harvester ( Principal Investigator(PI))
  17. 2017 - 2019, Prototype Research Grant Scheme (PRGS)
    Prototype Development Fabrication and Testing of a Bionanocomposite Packaging film Produced Using Blown Extruder Technology ( Co-Researcher)
  18. 2016 - 2018, Postgraduate Research Grant (PPP) - Research
    Improvement Of Biopolymer Properties Through Polymer Blended Composites As Thermoelectric Materials ( Principal Investigator(PI))
  19. 2016 - 2018, Postgraduate Research Grant (PPP) - Research
    FABRICATION OF SPECTRALLY SELECTIVE SOLAR ABSORBER MATERIAL VIA POWDER METALLURGY PROCESS ( Principal Investigator(PI))
  20. 2016 - 2018, Postgraduate Research Grant (PPP) - Research
    Fabrication of nano-textures on solar absorber surface for spectral selectivity ( Principal Investigator(PI))
  21. 2014 - 2017, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC))
    Synthesis And Investigation Of Novel Complex Bismuth Chalcogenides For Thermoelectric Power ( Principal Investigator(PI))
  22. 2014 - 2017, Fundamental Research Grant Scheme (FRGS)
    Fundamental Investigation Of High Efficiency Biopolymer Based Thermoelectric Materials As Waste Heat Energy Harvester. ( Principal Investigator(PI))
  23. 2014 - 2016, Bantuan Kecil Penyelidikan (BKP)
    Electrodynamic suspension system for magnetically levitated Vertical Axis Wind Turbine (VAWT) as energy harvester in low quality wind area. ( Principal Investigator(PI))
  24. 2019 - 2021, Fundamental Research Grant Scheme (FRGS)
    CORRELATIONS BETWEEN PROCESSING PARAMETERS AND GRAPHENE FORMATION FROM VEGETABLE OILS UNDER SIMPLE STEP MICROWAVE ASSISTED ARC IN LIQUID METHOD (01/01/2019 to 31/12/2021) ( Principal Investigator(PI))
  25. 2015 - 2017, Fundamental Research Grant Scheme (FRGS)
    Characterization of photocurrent conversion efficiency of dye sensitized solar cell using mangosteen pericarp and hibiscus as photosensitizer with advanced light trapping technique ( Consultant)
  26. 2014 - 2016, Fundamental Research Grant Scheme (FRGS)
    Fundamental investigation of organic thermoelectric generators (O-TEGs) for waste heat harvesting ( Consultant)
  27. 2008
    Grain refinement of 6061 Al alloy through cryogenic treatment.
  28. 2008
    Surface coatings of superplastic materials.

CONSULTANCY PROJECT


  • Analysis of Dots Spotted On Vehicle S Bonnet Cover, Edaran Tan Chong Motor Sdn Bhd (Nissan)
    01 Jun 2016 - 01 Jun 2017 (National)

PAPER PRESENTED


POSTER PRESENTER
  1. Microwave pyrolysis of plastic waste into fuel, Transdisciplinary Research and Practice for Reducing Environmental Problems 2021, Ehime University, Japan (International) (11 Dec 2021 - 12 Dec 2021)
  2. The Effect of Iron and Bismuth addition on the Microstructural, Mechanical, and Thermal Properties of Sn-1Ag-0.5Cu Solder Alloy, 26th European Symposium on Reliability of Electron Devices, Failure Physics and Analysis - ESREF 2015 , European Symposium on Reliability of Electron Devices, Failure Physics and Analysis  (International) (05 Oct 2015 - 09 Oct 2015)
OTHERS
  1. -, Bengkel MS ISO/IEC 17025 - Gerneral Requirements for The Competence of Testing and Calibration Laboratories, Engineering Faculty, University Malaya (Others) (05 Nov 2015 - 06 Nov 2015)
  2. -, Bengkel persediaan lawatan EAC dan Washington Accord, Lembaga Jurutera Malaysia (National) (05 Aug 2015 - 06 Aug 2015)
  3. -, Writing a Winning Research Proposal, Faculty of Engineering, University Malaya (Others) (02 Apr 2015 - 02 Apr 2015)

ACADEMIC/PROF. SERVICES


Evaluation
  1. (2024) Ipt Evaluation Panel - Frgs 2024 Evaluators, University, (Reviewer)
  2. (2024) Pelantikan Sebagai Panel Penilai Di Bawah Jawatankuasa Unit Pemantapan Kertas Cadangan (Proposal Enhancement Unit), University, (Reviewer)
  3. (2024) Pengerusi Jawatankuasa Pemeriksa Untuk Program Ijazah Tinggi, Fakulti Kejuruteraan, University, (Internal Examiner)
  4. (2023) External Evaluator for Research Grant of American University of Sharjah, United Arab Emirates, International, (Reviewer)
  5. (2023) Panel: Universiti Malaya Research Excellence Grant (Umreg) 2023, University, (Reviewer)
  6. (2023) Panel: Universiti Malaya Research Excellence Grant (Umreg) 2023, University, (Reviewer)
  7. (2023) Ipt Evaluation Panel - External Panel Frgs 2024 for Universiti Taylor's, National, (Reviewer)
  8. (2023) Proposal Defence Chairman and Panel Report for Lingeshwaran Ramachandran (S2118874/1), University, (Reviewer)
  9. (2023) External Examiner for a Master Student Universiti Tun Hussein Onn Malaysia (Uthm), National, (External Examiner)
  10. (2023) Chairman -Viva-Voce Session Chew See Khai (17058052/1 / Kga170029), University, (Internal Examiner)
  11. (2023) Panel for Universiti Malaya Bantuan Khas Penyelidikan - Early Career Researcher (Bkp-Ecr) 2023, University, (Reviewer)
  12. (2023) External Examiner for Master Student of International Islamic University Malaysia, National, (External Examiner)
  13. (2023) Panel Penilai Bagi Kemasukan Ke Dual. Degree Program Universiti Malaya - Osaka, University, (Internal Evaluator)
  14. (2023) Pelantikan Pemeriksa Dalam Laporan Penyelidikan Master Coursework: Semester 2, Sesi 2022/2023 - Noor Shakira Mohd Najib (S2043764/1), University, (Internal Examiner)
  15. (2023) Pelantikan Pemeriksa Dalam Laporan Penyelidikan: Semester 2, Sesi 2022/2023 - Sridharan Perumal (S2106475/1), University, (Internal Examiner)
  16. (2023) Chairman of Examiners Meeting for Farah Arina Binti Ibrahim (17198476/1 | Kga180018), University, (Internal Examiner)
  17. (2023) Ipt Evaluation Panel - Frgs 2023 Evaluators, University, (Reviewer)
  18. (2023) Reviewer for Biomass Conversion and Biorefinery - Bcab-D-23-00522, International, (Reviewer)
  19. (2023) Chairman for Master Degree Examiners Meeting for Lina Syazwana, University, (Internal Examiner)
  20. (2023) Ahli Jawatankuasa Tapisan (Pelantikan) Di Peringkat Jabatan, University, (Internal Assessor)
  21. (2022) Candidature Defence Panel for Muhamad Farhan Mohd Mazlan 17076572/3, University, (Internal Examiner)
  22. (2022) Pelantikan Pemeriksa Dalam Laporan Penyelidikan Syamimi Aisyah Mohammad Yusoff (S2023458/1)Semester 2, Sesi 2021/2022, University, (Internal Examiner)
  23. (2022) Candidature Defence Seminar - Aainaa Aqilah Binti Baharuddin (Kva180067, 17013270/2),Phd Candidate, University, (Internal Examiner)
  24. (2022) Pemeriksa Dalam Laporan Penyelidikan Park Wah Yap (S2038688/1), University, (Internal Examiner)
  25. (2021) Pelantikan Pemeriksa Dalam Laporan Penyelidikan Semester Khas, Sesi 2020/2021 - Nurul Adina Binti Azman, S2011034/1, University, (Internal Examiner)
  26. (2021) Reviewer for An Article Submitted to 2021 Aua and Icsgs Academic Conference - "Computational Fluid Dynamics Simulation for Carbon Dioxide Gas Transport Through Primitive-Structured Polymeric Membranes, International, (Reviewer)
  27. (2021) Internal Examiner for Master of Engineering Science Dissertation Examination (Research Mode) - Noorhidayah Binti Abdul Aziz, (17019995/1 | Kga140053), University, (Internal Examiner)
  28. (2021) Internal Examiner for Master of Engineering Science Dissertation Examination (Research Mode) - Muhamad Sharul Nizam Bin Awang (17202353/2), University, (Internal Examiner)
  29. (2021) AJK Kewangan Bagi Pembelian Peralatan Potentiostat, University, (Internal Evaluator)
  30. (2021) Candidature Defence Ijazah Sarjana Falsafah Institut Pengajian Termaju (IAS), University, (Internal Examiner)
  31. (2021) Reviewer for An Article Submitted to 2021 Aua and Icsgs Academic Conference - "Synthesis of Chitosan-Coated Magnetite Nanoparticles Using Co-Precipitation Method for Copper Ions Removal in Aqueous Solution", International, (Reviewer)
  32. (2021) Temuduga Menilai Calon Program Phd, University, (Internal Assessor)
  33. (2021) Reviewer for An Article in International Journal, International, (Reviewer)
  34. (2021) Assessor for Doctor of Philosophy and Master of Engineering Science Proposal Defence Semester 2, 2020/2021, University, (Internal Assessor)
  35. (2021) Examiner for Candidature Defence (Master Engineering Science) Seminar - Aunirauhah (Kmd190011, 17202205/1), University, (Internal Examiner)
  36. (2021) Examiner for Candidature Defence (Master Engineering Science) - Sharul Nizambin Awang (17202353/2 ), University, (Internal Examiner)
  37. (2021) Examiner for Candidature Defence (Doctor of Philosophy) Seminar Harish Kumarloganathan (Kva180045,17198059/1), University, (Internal Examiner)
  38. (2021) Pemeriksa Dalam Laporan Projek Penyelidikan - Arrul a/L Jagindar, 17198717/1, University, (Internal Examiner)
  39. (2021) Pemeriksa Dalam Laporan Projek Penyelidikan - Yeo Soon Tee, 17198635/1, University, (Internal Examiner)
  40. (2021) Pemeriksa Dalam Laporan Projek Penyelidikan - Sarmad Khubaib Bin Sarajun Hoda,17219530/1, University, (Internal Examiner)
  41. (2021) Reviewer for An Abstract Submitted to The 4th Sohar University Research Conference 2021 - Sustainable Development of Green Emulsion Liquid Membrane for The Removal of Pollutants from Wastewater, International, (Reviewer)
  42. (2021) Review An Article in International Journal Indexed by Wos, International, (Reviewer)
  43. (2021) Review An Article in International Journal Indexed by Wos, International, (Reviewer)
  44. (2021) Examiner for Candidature Defence (Doctor of Philosophy) Seminar Mohdkhoushaini Bin Mohd Naim (Kha140090 / 17020028/1), University, (Internal Examiner)
  45. (2021) Examiner for Andidature Defence (Doctor of Philosophy) Seminar - Wong Yung Cheng (Kha160050, 17035504/1), University, (Internal Examiner)
  46. (2021) Reviewer for An Article Submitted to 2nd International Conference On Materials Science and Engineering (Ic-Mse 2021) - "Progress in The Study of Heteropolyacid-Based-Oxide Nanocomposite Photocatalytic Materials", International, (Reviewer)
  47. (2021) Examiner for Phd Candidature Defence - Elaine Why Siew Kuan (Kva180076/17198364/1), University, (Internal Examiner)
  48. (2020) Material Science and Engineering Technology , (Reviewer)
  49. (2020) Master Thesis: SYNTHESIS AND CHARACTERIZATION OF BIMETALLIC GOLD-SILVER (Au-Ag) NANOCATALYST VIA SEED COLLOID TECHNIQUE, (Internal Examiner)
  50. (2020) Journal of Science and Technology, (Reviewer)
  51. (2020) CORROSIONBEHAVIOR OF MAGNESIUM ALLOYS WITH ADDITION OF PROTEIN , (External Examiner)
  52. (2020) IN-PIPE HYDRO POWER GENERATION PLANT , (Internal Examiner)
  53. (2020) Master Thesis: INVESTIGATIONS OF FLOW PATTERNS AND MEASUREMENT OF VOID FRACTION IN A VERTICAL CHANNEL OF GAS-LIQUID TWO-PHASE FLOW USING CFD MODELING, (Internal Examiner)
  54. (2019) PhD Thesis: OPTIMISATION OF OCTAHEDRALSPIN CROSSOVER METAL COMPLEXES FOR THERMOELECTROCHEMICAL ENERGY HARVESTING , (Internal Examiner)
  55. (2019) PhD Thesis: INVESTIGATION OF ZrO2 GATE DIELECTRIC ON GE SUBSTRATE FOR METAL- OXIDESEMICONDUCTOR- BASED DEVICE TECHNOLOGY, (Internal Examiner)
  56. (2018) Polymers and Polymer Composites , (Reviewer)
  57. (2018) Materials Science and Engineering B , (Reviewer)
  58. (2018) Evolutions in Mechanical Engineering (EME), (Reviewer)
  59. (2018) Solar Energy Materials and Solar Cells , (Reviewer)
  60. (2018) Journal of Science and Technology , (Reviewer)
  61. (2017) ICoSEM 2017 , (Reviewer)
  62. (2016) PhD Thesis: THERMOELECTRIC PROPERTIES of LaCo4Sb12 AND YbCo4Sb12 SKUTTERUDITE MATERIALS BY ADDITION of Al, In, Ni & Te, (Internal Examiner)
  63. (2016) ELECTROSPUN CHITOSAN/POLY (ETHYLENE OXIDE)/ACTIVATED CARBON NANOFIBROUS MEMBRANE FOR HEAVY METAL ION ADSORPTION, (Internal Examiner)
  64. (2015) Master Thesis: THE EMPLOYMENT OF ADVANCED FIBER LASER TECHNOLOGY TO WELD DISSIMILAR MATERIALS : STAINLESS STEEL AND ALUMINIUM ALLY USING PRE-PLACED POWDER BASED ACTIVATING FLUX AND FILLER, (Internal Examiner)
  65. (2015) Master Thesis: SYNTHESIS AND CHARACTERIZATION OF Cu3.21Bi4.79S9 FOR THERMOELECTRIC POWER GENERATION , (Internal Examiner)
  66. (2015) Article in Sientific.Net in conjunction with ICOSEM 2015, (Reviewer)
  67. (2015) PhD Thesis: Thermoelectric Properties of Novel Microstructurally Modified CoSb3 Skutterudite Materilas by Minor Dopants of Mn, Hf, Al, Bi and Yb, (Internal Examiner)
  68. (2015) Master Thesis: ROLE OF CURRENT DENSITY IN IMPRESS CURRENT CATHODIC PROTECTION OF STAINLESS STEEL IN 3.5% NaCI SOLUTION, (Internal Examiner)
  69. (2014) PhD Thesis: Electrodeposition and characterization of Sn-Bi lead-free solder alloys , (Internal Examiner)
Contribution to external organisation
  1. (2023) Technical Committee Member of International Conference On Energy and Environmental Science, International, (Technical Advisor)
  2. (2023) Jawatankuasa Standard Kebangsaan - Metallic, National, (Expert Advisor)
  3. (2022) Penyelidik Pusat Penyelidikan Malaysia-Jepun, Universiti Malaya, University, (Research Fellow/Associate)
  4. (2022) Metallic Materials and Semi-Finished Products Committee, Standards Malaysia, Committee Member, National, (Expert Advisor)
  5. (2021) 38th World Conference On Applied Science Engineering and Technology, International, (Technical Advisor)
  6. (2021) Technical Committee and Reviewer for 2021 International Conference On Mechanical Engineering and Intelligent Manufacturing (Icmeim 2021), International, (Technical Advisor)
  7. (2021) Technical Committee and Reviewer for 2021 2nd International Conference On Materials Science and Engineering (Ic-Mse 2021), International, (Technical Advisor)
  8. (2020) 2021 International Conference on Materials Science and Chemistry Engineering (ICMSCE 2021), Innovative Science and Engineering Research Institute (ISERI)
  9. (2020) 2021 2nd International Conference on Materials Science and Engineering (IC-MSE 2021), Innovative Science and Engineering Research Institute (ISERI)
  10. (2019) International Conference on the Science and Engineering of Materials 2019, University Malaya
  11. (2018) MENTOR for Beyond Engineering Innovation (BEGIN) Challenge 2018 , University Malaya
  12. (2018) 4th International Conference on Mechanical, Manufacturing and Plant Engineering (ICMMPE 2018), Sigma Research and Consulting Sdn.Bhd
  13. (2017) International Conference on The Science and Engineering of Materials , Centre of Advanced Materials, University Malaya
  14. (2017) Reviewer for 3rd Advanced Materials Conference (AMC 2016) (volume CP 1901) , SIRIM Berhad , Malaysia and Ministry of Science, Technology and Innovation, Malaysia
  15. (2016) Advances in Materials and Processing Technologies (AMPT) 2016 Conference, Kuala Lumpur, Malaysia ( 8th 11th November 2016)., University Malaya
  16. (2015) Secretary for International Conference on The Science and Engineering of Materials 2015, University Malaya
  17. (2015) Co-Supervisor for Final Year Project 2015 - 2016 , University Technology Mara
  18. (2015) 2016 International Conference on Renewable Energy and Smart Grid (ICRESG 2016), Hong Kong Society of Mechanical Engineers(HKSME) and Thammasat University, Thailand
  19. (2014) Organizing committee for AuN/SEED-Net Regional Conference on Materials Engineering 2014, AUN/SEED-Net
  20. (2014) Jawatankuasa Standard Perindustrian bagi Bahan Logam dan Barangan Separuh Siap (ISC P)- SIRIM, SIRIM Berhad
Contribution to event
  1. (2023) Scientific Committee for 45th World Conference On Applied Science, Engineering & Technology,, International, (Event Organiser)
  2. (2023) Icosem 2023 Organizing Committee, International, (Event Organiser)
  3. (2022) Ahli Jawatankuasa Pembangunan Makmal Di Fkum, University, (Event Coordinator)
  4. (2021) Participant in Plastics Sustainability: Challenges & Opportunities Webinar by Iem, National, (Participant)
  5. (2021) Jawatankuasa Spesifikasi Perolehan, University, (Participant)
  6. (2021) Participant - Eu-Asean Webinar Series - Eu Asean Dialogue On Greentech & Innovation Mapping: Green Technologies for Plastic Value Chain Management Series, International, (Participant)
  7. (2021) Pelantikan Auditor Audit Aset Penyelidikan Fakulti Kejuruteraan, Universiti Malaya, University, (Event Organiser)
  8. (2021) Technical Committee of Surc 2021, The 4th Sohar University Research Conference 2021 (Oman), International, (Event Organiser)
  9. (2021) Pelantikan Sebagai Ahli Task Force 14: Creating Enterpreneur Ecosystem, Universiti Malaya, University, (Event Coordinator)
  10. (2021) Ahli Jawatankuasa Ad Hoc Pelajar Semasa Kawalan Covid, Di Jabatan Kejuruteraan Mekanik, Fakulti Kejuruteraan, Universiti Malaya, University, (Event Coordinator)
  11. (2021) Pelantikan Jawatankuasa Data and Research Assets Management Unit (Damu) Fakulti Kejuruteraan, Universiti Malaya, University, (Event Coordinator)
  12. (2021) Ahli Jawatankuasa Makmal (Pengajaran dan Penyelidikan), Ijazah Sarjana Muda Di Jabatan Kejuruteraan Mekanik, Fakulti Kejuruteraan, Universiti Malaya, University, (Event Coordinator)
  13. (2021) Ahli Jawatankuasa Semakan Kurikulum dan Penambahbaikan Program Ijazah Sarjana Muda Di Jabatan Kejuruteraan Mekanik, Fakulti Kejuruteraan, Universiti Malaya, University, (Event Organiser)
Mentoring
  1. (2022) Mentor for Frgs Proposal, University, (Mentor)

SUPERVISION


Postgraduate Student
PhD/ Doctoral
  1. (2024) Microwave-Metal Pyrolysis of Mixed Plastic to Fuel Using Iron, Aluminium and Copper as Microwave Susceptor, PUTRI HUMAIRAH BINTI MONASHOFIAN PUTRA
  2. (2024) Quantifying Turbulence Kinetic Energy in the Upper Airway of Obstructive Sleep Apnea Patients Post-Mandibular Advancement Surgery, MOHD FARUQ BIN ABDUL LATIF
  3. (2024) FORMATION OF NANO-CARBON FROM PALM OIL VIA ARC DISCHARGE AND ITS POTENTIAL FOR SENSOR APPLICATION, SITI ZUBAIDAH BINTI MOHAMED SIDDICK
  4. (2022) Fabrication and Characterization of Poly(Lactic Acid) Based Biocomposite for Food Packaging Application, YEE YIN YIN
  5. (2020) NUMERICALLY STUDY ON FLUID FLOW CHARACTERISTICS IN A MICRO CHANNEL HEAT SINK (MCHS) WITH WAVY OBSTRUCTIONS ON THE FLOOR AND ITS EFFECT ON HEAT TRANSFER PERFORMANCE., MOHD FARUQ BIN ABDUL LATIF
  6. (2020) MICROWAVE PYROLYSIS, PUTRI HUMAIRAH BINTI MONASHOFIAN PUTRA
  7. (2020) FORMATION OF NANO-CARBON MATERIALS FROM VEGETABLE OILS VIA SIMPLE STEP ARC METHOD FOR MOS-BASED DEVICE, SITI ZUBAIDAH BINTI MOHEMED SIDDICK
  8. (2019) PLA REINFORED WITH ORGANIC FILLERS FOR BREATHEABILITY PERFORMANCE OF PACKAGING FILM APPLICATION, YEE YIN YIN
  9. (2019) EFFECTS OF POLYTETRAFLUOROETHYLENE MICRO-PARTICLES ON MECHANICAL AND TRIBOLOGICAL PROPERTIES OF GLASS FIBER REINFORCED POLYOXYMETHYLENE, JASBIR SINGH A/L KUNNAN SINGH
  10. (2019) EFFECTS OF POLYTETRAFLUOROETHYLENE MICRO-PARTICLES ON MECHANICAL AND TRIBOLOGICAL PROPERTIES OF GLASS FIBER REINFORCED POLYOXYMETHYLENE, JASBIR SINGH A/L KUNNAN SINGH
  11. (2018) GREEN APPROACH TO FUNCTIONALIZE HIGHLY STABLE GRAPHENE NANOPLATELETS COLLOID FOR HEAT BASED APPLICATIONS, SITI SHAFIAH BINTI SHAZALI
  12. (2018) GREEN APPROACH TO FUNCTIONALIZE HIGHLY STABLE GRAPHENE NANOPLATELETS COLLOID FOR HEAT BASED APPLICATIONS, SITI SHAFIAH BINTI SHAZALI
  13. (2017) SUB-SEA RADIO WAVE PROPAGATION, ALI HAMAD ALI
  14. (2017) Development of Dope Bismuth Sulfide System for Thermoelectric Application, FITRIANI
  15. (2017) Development of Dope Bismuth Sulfide System for Thermoelectric Application, FITRIANI
  16. (2015) INVESTIGATION ON MECHANICAL, MICROSTRUCTURAL AND THERMAL PROPERTIES OF Sn-0.7Cu AND Sn-1Ag-0.5Cu SOLDER ALLOYS BEARING Fe AND Bi, MOHAMMAD HOSSEIN MAHDAVIFARD
  17. (2015) INVESTIGATION ON MECHANICAL, MICROSTRUCTURAL AND THERMAL PROPERTIES OF Sn-0.7Cu AND Sn-1Ag-0.5Cu SOLDER ALLOYS BEARING Fe AND Bi, MOHAMMAD HOSSEIN MAHDAVIFARD
  18. (2014) Characterization of Mechanical and Tribological Properties of natural-Glass Fiber Reinforced Polycarbonate Hybrid Composites, : JASBIR SINGH A/L KUNNAN SINGH
  19. (2013) Improving Mechanical, Interfacial and Microstructural Properties of Lead-free Solder Sn-1Ag-0.7Bi-0.5Cu by Adding of Fe, Ni, Ge and Mn, Mohammad Hossein Mahdavifard
Master
  1. (2024) TOWARDS SUSTAINABLE RIVER MANAGEMENT: NANO PHOTO-REDUCTION, BIODECOMPOSE AND ENGINEERED CATALYTIC DEPOLYMERIZATION METHODS ON TREATMENT OF SOLID AND LIQUID RIVER WASTES, MOHAMAD ASHRAF BIN ZULNIZAM
  2. (2024) WP3: TOWARDS SUSTAINABLE RIVER MANAGEMENT : ENGINEERED CATALYTIC DEPOLYMERISATION METHODS, AHMAD LUQMAN BIN MOHAMAD ADAN
  3. (2024) Hydrothermal Synthesis of Hierarchical NiO Nanoparticles Loaded SnO2 for Acetone Gas Sensing, SHADY FOUAD AHMED SABER
  4. (2023) Microwave – Metal – Assisted Pyrolysis of Biochar Using Empty Fruit Bunch, NUR HASNIZA BINTI MOHD HANAFI
  5. (2023) Synthesis of Magnetic Nanocarbons using Palm Oil as Precursor via Microwave Assisted Arc in Liquid, NURUL ZARIAH BINTI JAKARIA @ ZAKARIA
  6. (2023) Synthesis and Characterization of Graphene Oxide - Cobalt Oxide Nanocomposite for Acetone Detection, NABILAH BINTI MOHAMMAD YUSOF
  7. (2023) Controllable Growth of Tellurium Based Films by Electrochemical Deposition Technique, YANG FAN
  8. (2020) SYNTHESIS OF GRAPHENE USING PALM OIL AS PRECURSOR VIA MICROWAVE ASSISTED ARC IN LIQUID, NURUL ZARIAH BINTI JAKARIA @ ZAKARIA
  9. (2020) GRAPHENE OXIDE BASED HUMAN BREATH ANALYZING SENSORS FOR EARLY DETECTION OF DIABETES, Nabilah Mohammad Yusof
  10. (2019) Nanostructured Oxides for Environmental Gas Sensing, SHADY FOUAD AHMED SABER
  11. (2018) IMPROVEMENT OF BIOPOLYMER PROPERTIES THROUGH POLYMER BLENDED COMPOSITE AS THERMOELECTRIC MATERIALS, NUR ARFAREZZA BINTI AHMAD
  12. (2018) FABRICATION OF SPECTRALLY SELECTIVE SOLAR POWER ABSORBER MATERIAL VIA POWDER METALLURGY PROCESS, MOHD ZAKUAN BIN ZABRI
  13. (2018) FABRICATION OF SPECTRALLY SELECTIVE SOLAR POWER ABSORBER MATERIAL VIA POWDER METALLURGY PROCESS, MOHD ZAKUAN BIN ZABRI
  14. (2017) FABRICATION OF SPECTRALLY SELECTIVE SURFACE FOR SOLAR POWER ABSORBER USING NANO-IMPRINT PROCESS, ENGKU NUR HANINI BINTI ENGKU JAAFAR
  15. (2016) EVALUATION OF ELECTRICAL PROPERTIES, OXIDATION AND CORROSION BEHAVIOR OF Fe AND Bi ADDED Sn-0.7Cu LEAD-FREE SOLDER ALLOY, SYED HASSAN ABBAS JAFFERY
  16. (2016) EVALUATION OF ELECTRICAL PROPERTIES, OXIDATION AND CORROSION BEHAVIOR OF Fe AND Bi ADDED Sn-0.7Cu LEAD-FREE SOLDER ALLOY, SYED HASSAN ABBAS JAFFERY
  17. (2015) FABRICATION OF SPECTRALLY SELECTIVE SOLAR POWER ABSORBER MATERIAL VIA POWDER METALLURGY PROCESS., MOHD ZAKUAN BIN ZABRI
  18. (2014) Design and simulation of hybrid wind turbine, Tuan Faiez Ezwan Bin Tuan Sulaiman
Under Graduate Students
  1. (2023) Effects of temperature and heating time on pyrolysis of ripe fresh oil palm fruit.
  2. (2023) Effects of power and time on metal assisted microwave carbonization of oil palm frond.
  3. (2023) Effects of power and heating time on metal assisted microwave carbonisation of oil palm leaves.
  4. (2023) Effect of power and time on microwave pyrolysis of fresh oil palm fruit.
  5. (2023) Effect of power and heating time on carbonization of empty fruit bunch.
  6. (2023) Practices, Muhammad Aiman Mursyid Bin Zulkifli, Muhammad Akhil Bin Shaari, Sayel Hossain Kazi, Zareef Izwan Bin Zurwani
  7. (2022) INFLUENCE OF CATALYST ON CARBONIZATION OF CRUDE PALM OIL FOR AZO DYE ADSORPTION APPLICATION
  8. (2022) Effects of microwave power level on carbonization of biomass from oil palm waste.
  9. (2022) Effects of Microwave Heating Time on Carbonization of Biomass from Oil Palm Waste
  10. (2022) EFFECTS OF MICROWAVE HEATING TIME AND RATIO OF CATALYST ON CARBONIZATION OF BIOMASS FROM OIL PALM WASTE
  11. (2022) EFFECT OF MICROWAVE POWER ON THE CARBONIZATION OF CRUDE PALM OIL FOR METHYLENE BLUE ADSORPTION
  12. (2022) Effect Of Metals on Carbonization Of Crude Palm Oil Using Microwave-Assisted Pyrolysis
  13. (2022) Practices, Muhammad Zubair Bin Ahmad Fauzi, Muhammad Alief Iqbal Bin Rashidi, Muhammad Arash Bin Lokman, Iskandar Zulqarnain Bin Mohamed Johari, Long Fu Jian
  14. (2021) PYROLYSIS PROCESS OF CONVERTING PLASTIC WASTE TO OIL
  15. (2021) Convert palm oil into nanocarbon with spark heating / arc discharge process
  16. (2021) Converting palm oil into nanocarbon structure via spark heating
  17. (2021) CONVERTING CRUDE PALM OIL INTO NANOCARBON VIA MICROWAVE HEATING
  18. (2021) CONVERSION OF PALM OIL INTO NANOCARBON USING MICROWAVE-PYROLYSIS

TEACHING


Bachelor
  1. (2023) KIG1004 - Basic Materials for Mechanical Engineering
  2. (2023) KIG1011 - Engineering Materials 1
  3. (2022) KIG1004 - Basic Materials for Mechanical Engineering
  4. (2022) KIG1009 - Statics
  5. (2021) KIG1004 - Basic Materials for Mechanical Engineering
  6. (2021) KIG1001 - Statics
  7. (2020) KIG1001 - Statics
  8. (2020) KIG1004 - Basic Materials for Mechanical Engineering
  9. (2020) KIX1003 - Thinking and Communication Skills
  10. (2018) KIG2005 - Engineering Materials
  11. (2017) KIG1001 - Statics
  12. (2017) KIG2005 - Engineering Materials
  13. (2017) KMEB2173 - Makmal Engineering Laboratory III
  14. (2017) KMEM2108 - Engineering Materials
  15. (2016) KMEB2172 - Materials Engineering Laboratory 2
  16. (2016) KMEB3104 - Ferrous Alloys and Heat Treatment
  17. (2016) KMEM2108 - Engineering Materials
  18. (2015) KMEB3104 - Ferrous Alloys and Heat Treatment
  19. (2015) KMEM2108 - Engineering Materials
  20. (2014) KMEB3104 - Ferrous Alloys and Heat Treatment
  21. (2014) KMEM2108 - Engineering Materials

PATENT/IPR


  • A Biopolymer-Based Nanocomposite Film
    PATENT

SOCIAL RESPONSIBILITY ACTIVITIES


  • Chairman for Organizing Committee of The Webinar On My Waset, Our Wealth for Secondary School, (16 Aug 2021 - 16 Aug 2021) (National)
  • Expert Reviewers for Global Strategies for a Resilient and Sustainable Post Pandemic World Towards a Better Future for All, (16 Jul 2021 - 27 Oct 2021) (International)
  • Technical Committee and Reviewer for 2021 International Conference On Biomaterials and Applications Engineering (Ic-Bae 2021), (01 Apr 2021 - 17 Dec 2021) (International)
  • Organizing Committee for The Webinar On "Sensor Gas dan Aplikasinya Dalam Kehidupan" for Secondary School, (24 Mar 2021 - 24 Mar 2021) (National)
  • Invited Speaker At 2nd Asean - Japan Meeting Point of Collaboration by Stakeholders and Researchers for Reducing Environmental Problems in Asean Countries, (11 Dec 2019 - 13 Dec 2019)
  • Organizing Committee for Shizuoka University - University Malaya Workshop On Advanced Engineering Research and Cultural Exchange, (18 Nov 2019 - 18 Nov 2019)
  • Organizing Committee- International Conference On The Science and Engineering of Materials 2019, (26 Aug 2019 - 28 Aug 2019)
  • Reviewer for Advanced Materials Conference 2018, (05 Mar 2019 - 05 Mar 2019)
  • International Technical Committee for 2017 2nd Asia Conference On Power and Electrical Engineering (Acpee 2017), (24 Mar 2017 - 26 Mar 2017)
  • Coordinator and Chairman for Join Research Seminar With Ehime University (Eu), Japan, (05 Dec 2016 - 05 Dec 2016)
  • 2016 International Conference On Renewable Energy and Smart Grid (Icresg 2016), (03 Sep 2015 - 22 Mar 2016)

COURSE ATTENDED


Internal / External Course
COURSES ORGANIZED BY PTJ
  1. SPECTRUM WORKSHOP (BASIC), Aras 14, Wisma R&D Universiti Malaya (28 Jan 2014 - 28 Jan 2014)
  2. KURSUS ISO/IEC 17025: TESTING AND CALIBRATION LABORATORY, The Cube, Aras 2, Fakulti Kejuruteraan Universiti Malaya (05 Nov 2015 - 06 Nov 2015)
  3. WRITING A WINNING RESEARCH PROPOSAL, The Cube, Aras 2, Fakulti Kejuruteraan Universiti Malaya (02 Apr 2015 - 02 Apr 2015)
EXTERNAL COURSE
  1. GUIDED ULTRASONIC LEVEL 1, Kuantan, Pahang (04 Sep 2017 - 09 Sep 2017)
  2. HETEROGENEOUS INTEGRATION AND TECHNOLOGY TECHNICAL WORKSHOP 2017, Malaysian Investment Development Authority (Mida) Kl Sentral (14 Nov 2017 - 15 Nov 2017)
CONFERENCE
  1. GRAPHENE INTERNATIONAL CONFERENCE - GRAPHENE MALAYSIA 2016, Connexion Conference & Event Centre, Summit 1 Ballroom, Level M1,The Vertical No 8 Jalan Kerinchi Kl (08 Nov 2016 - 09 Nov 2016)
  2. 4TH INTERNATIONAL CONFERENCE ON MECHANICAL, MANUFACTURING AND PLANT ENGINEERING, Hatten Hotel Melaka, Malaysia (14 Nov 2018 - 15 Nov 2018)
INTERNAL COURSE- ORGANIZED BY PTJ
  1. COACHING AND MENTORING FOR ACADEMIC AND INSTITUTIONAL LEADERS: BRINGING OUT THE BEST IN YOUR STUDENT, Universiti Malaya (07 May 2018 - 07 May 2018)
  2. INSPIRE : ENHANCING RESEARCH VISIBILITY AND CITATIONS THROUGH STRATEGIC PUBLISHING PRACTICES, Universiti Malaya (30 Aug 2018 - 30 Aug 2018)
  3. UTILIZING SPECTRUMS MODULES FOR BETTER STUDENT ENGAGEMENT, Zoom (17 Aug 2023 - 17 Aug 2023)