
Curriculum Vitae
BIOGRAPHY
Profesor Dato’ Seri Ir. Dr. Noor Azuan Bin Abu Osman has achieved considerable distinction in his academic and professional pursuits. He graduated from the University of Bradford, UK with a B.Eng. Hons. in Mechanical Engineering and furthered his credentials with an MSc and Ph.D. in Bioengineering from the University of Strathclyde, United Kingdom.
A leading expert in biomechanics, Azuan’s research spans various areas, with a particular focus on the measurements of human movement, the design of prosthetics, orthotics, and orthopaedic implants, as well as the development of instruments for assessing forces and joint motion. In 2004, his significant contributions to the development of the prosthetic socket were recognized with the BLESMA award from ISPO UK NMS.
Prof. Azuan has held a number of prestigious positions in his career. He served as the Deputy President of the Society of Medical and Biological Engineering (MSMBE), an affiliate of the International Federation for Medical and Biological Engineering (IFMBE). His roles have included being the Acting Registrar of UM, Dean of Engineering, Deputy Director of the Centre for Applied Biomechanics, and Coordinator of the Motion Analysis Laboratory at the Faculty of Engineering, University of Malaya.
Marking a notable advancement in his academic leadership, he was appointed as the Vice Chancellor of Universiti Tenaga Nasional (UNITEN) from 15th June 2022 until 5th November 2023. Subsequently, he continued his journey in higher education leadership by assuming the position of Vice Chancellor at Universiti Malaya starting on 6th November 2023.
Prof. Azuan has been distinguished with several honors for his professional achievements and service. In 2023, he was conferred the Darjah Gemilah Pangkuan Negeri (D.G.P.N) by the Governor of Penang, bestowing upon him the title of Dato' Seri, in recognition of his exceptional contributions to the field of engineering and higher education.
He is a prolific scholar with numerous publications in books, conference proceedings, and journals. His professional affiliations are testament to his expertise: he is a Chartered Engineer (C.Eng.) and Fellow (FIMechE) with The Institution of Mechanical Engineers, UK; a Chartered Professional Engineer (C.PEng) and Fellow (FIEAust) with Engineers Australia; and a Chartered Scientist (C.Sci.) and Professional Member (MICR) with The Institute of Clinical Research, UK.
Prof. Azuan's career is a testament to his dedicated commitment to the advancement of biomechanical engineering and his skillful navigation through the challenges of academic leadership.
ACADEMIC QUALIFICATION
- PhD (BioEng)(Strathclyde,UK)(2005), (BIOMEKANIK / PROSTETIK DAN ORTOTIK)Strathclyde University, Scotland
- MSc (BioEng)(Strathclyde,UK)(1999), (Kejuruteraan Bioperubatan)Strathclyde University, Scotland
- BEng (Hons)(Mech)(Bradford,UK)(1997), (MECHANICAL ENGINEERING)Bradford University, Bradford, UK
- Diploma (Mech)(UTM)(1991), (Mechanical Engineering)Universiti Teknologi Malaysia (UTM)
ADMINISTRATIVE DUTIES
- Vice-Chancellor06 Nov 2023 - present (Vice Chancellor's Office, Vice-Chancellor)
- Acting Vice-Chancellor08 Jun 2022 - 05 Nov 2023 (International)
- Acting Registrar07 Dec 2020 - 02 Jun 2022 (Registrar Office, Registrar)
- Executive Director01 Jan 2012 - 31 Dec 2022 (National)
- Dean01 Jul 2016 - 31 Oct 2017 (Dean Office, Faculty of Engineering)
- Dean01 Jul 2014 - 30 Jun 2016 (Dean Office, Faculty of Engineering)
- Acting Dean10 Jan 2014 - 30 Jun 2014 (Dean Office, Faculty of Engineering)
- Acting Dean01 Sep 2013 - 09 Jan 2014 (Dean Office, Faculty of Engineering)
- Deputy Dean of Undergraduate01 Jul 2011 - 30 Jun 2014 (University Malaya)
- Deputy Dean of Development01 Mar 2012 - 30 Jun 2014 (University Malaya)
- Deputy Dean01 Jul 2011 - 01 Sep 2013 (Dean Office, Faculty of Engineering)
- Head of Department01 Sep 2009 - 01 Jul 2011 (Department of Biomedical Engineering, Faculty of Engineering)
- Head of Department01 Apr 2006 - 30 Jun 2011 (University Malaya)
- Head of Department01 Sep 2007 - 31 Aug 2009 (Department of Biomedical Engineering, Faculty of Engineering)
- Head of Department01 Sep 2006 - 31 Aug 2007 (Department of Biomedical Engineering, Faculty of Engineering)
- Head of Department01 Jun 2006 - 31 Aug 2006 (Department of Biomedical Engineering, Faculty of Engineering)
- Head of Department01 Apr 2006 - 31 May 2006 (Department of Biomedical Engineering, Faculty of Engineering)
AWARD AND STEWARDSHIP
- Darjah Gemilang Pangkuan Negeri (D.G.P.N)Pulau Pinang, 2023 (National)
- DEGREE AWARDSSARAWAK, 2019 (State)
- Kesatria 2017MInistry of Tourism and Culture Malaysia, 2017 (National)
- CERTIFICATE OF EXCELLENT SERVICEUniversity of Malaya, 2016 (University)
- UM EXCELLENCE AWARDNAIB CANSELOR, 2015 (University)
- EXCELLENCE SERVICE AWARDUniversity of Malaya, 2012 (University)
- CERTIFICATE OF EXCELLENT SERVICEUniversity of Malaya, 2009 (University)
- CERTIFICATE OF EXCELLENT SERVICEUniversity of Malaya, 2007 (University)
- EXCELLENCE SERVICE AWARDUniversity of Malaya, 2006 (University)
- CERTIFICATE OF EXCELLENT SERVICEUniversity of Malaya, 2002 (University)
PUBLICATIONS
Article in Journal
- Soudagar, M. E. M., Umarfarooq, M. A., Gouda, P. S., Banapurmath, N. R., Osman, N. A., Ramesh, S., ... & Bisht, Y. S. (2024). Implications of end cooling rates on the Mechanical, Viscoelastic, and interlaminar fracture properties of the unidirectional glass Fiber/Epoxy composites. Composites Part A: Applied Science and Manufacturing, 108631.
- Ab Rasid, A. M., Muazu Musa, R., Abdul Majeed, A. P., Musawi Maliki, A. B. H., Abdullah, M. R., Mohd Razmaan, M. A., & Abu Osman, N. A. (2024). Physical fitness and motor ability parameters as predictors for skateboarding performance: A logistic regression modelling analysis. PLoS one, 19(2), e0296467.
- Ahmad Zahudi, A. Z., Usman, J., & Abu Osman, N. A. (2024). Exploring the impact of bowling ball properties and performance through the use of technology: An analysis of bowling ball motion. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 17543371241260099.
- Al Kouzbary, M., Al Kouzbary, H., Liu, J., Shasmin, H. N., Arifin, N., & Osman, N. A. A. (2024). Analysis of human ambulation as a chaotic time-series: with nonlinear dynamics tools. Computer Methods in Biomechanics and Biomedical Engineering, 1-13.
- El Ghailassi, I., Hashim, N. A., Abd Razak, N. A., Osman, N. A. A., Gholizadeh, H., & Astuti, S. D. (2024). Investigation of EMG Parameters for Transtibial Amputees While Treadmill Walking with Different Speeds: A Preliminary Study. IEEE Access. 1(1).
- Ibrahim, M. T., Hashim, N. A., Abd Razak, N. A., Abu Osman, N. A., Gholizadeh, H., & Astuti, S. D. (2024). Techniques for Measuring the Fluctuation of Residual Lower Limb Volume in Clinical Practices: A Systematic Review of the Past Four Decades. Applied Sciences, 14(6), 2594.
- Khamis, T., Al Kouzbary, M., Al Kouzbary, H., Mokayed, H., Abd Razak, N. A., & Osman, N. A. A. (2024). Automated transtibial prosthesis alignment: A systematic review. Artificial Intelligence in Medicine, 102966.
- Liu, J., Liu, J., Cheah, P. Y., Al Kouzbary, M., Al Kouzbary, H., Yao, S. X., ... & Abu Osman, N. A. (2024). Design and preliminary verification of a novel powered ankle–foot prosthesis: From the perspective of lower-limb biomechanics compared with ESAR foot. Plos one, 19(6), e0303397.
- Malaheem, M. S., Abd Razak, N. A., & Osman, N. A. A. (2024). A systematic review of methods used to assist transtibial prosthetic alignment decision-making. Prosthetics and Orthotics International, 10-1097.
- Tripathy, A., Sharma, P. & Osman, N.A.B.A. Synthesis, fabrication and characterization of CaMgFexTiyO12-based electro-ceramics sensor. (2024). J Mater Sci: Mater Electron 35, 492.
- Abu Osman, N. A., Nordin, N. I., Tan, K. C., Hosri, N. A. H. A., Pei, Q., Ng, E. P., ... & Chua, Y. S. (2023). Nanosizing Approach—A Case Study on the Thermal Decomposition of Hydrazine Borane. Materials, 16(2), 867.
- Liu, J., Naeem, M. A., Al Kouzbary, M., Al Kouzbary, H., Shasmin, H. N., Arifin, N., ... & Abu Osman, N. A. (2023). Effect of Infill Parameters on the Compressive Strength of 3D-Printed Nylon-Based Material. Polymers, 15(2), 255.
- Malaheem, M. S., Abd Razak, N. A., & Osman, N. A. A. (2023). A systematic review of methods used to assist transtibial prosthetic alignment decision-making. Prosthetics and Orthotics International, 10-1097.
- Ngah, A. H., Kamalrulzaman, N. I., Mohamad, M. F. H., Abdul Rashid, R., Harun, N. O., Ariffin, N. A., & Abu Osman, N. A. (2023). Do Science and Social Science Differ? Multi-Group Analysis (MGA) of the Willingness to Continue Online Learning. Quality & Quantity, 57(4), 2957-2980.
- Saad, S., Ibrahim, N., & Osman, N. A. A. (2023). Dynamic model of upper extremity and its application: a systematic review. RUSSIAN JOURNAL OF BIOMECHANICS, 1, 75-83.
- Safee, M. K. M., & Osman, N. A. A. (2023). Relationship between postural stability and fall risk in young adult after lower limb muscle fatigue. Healthcare in Low-resource Settings, 11(s1).
- Tham, L. K., Al Kouzbary, M., Al Kouzbary, H., Liu, J., & Abu Osman, N. A. (2023). Estimation of body segmental orientation for prosthetic gait using a nonlinear autoregressive neural network with exogenous inputs. Physical and Engineering Sciences in Medicine, 46(4), 1723-1739.
- Zahudi, A. Z. A., Usman, J., & Osman, N. A. A. (2023). Relationship of anthropometric measurement and handgrip strength in Malaysian recreational tenpin bowlers. Pedagogy of Physical Culture and Sports, 27(2), 131-138.
- Zainuddin, N. A. M. N., Razak, N. A. A., Karim, M. S. A., & Osman, N. A. A. (2023). Surface profile analysis of laminated transfemoral prosthetic socket fabricated with different ratios of epoxy resin and acrylic resin. Scientific reports, 13(1), 2664.
- Ab Rasid, A. M., Musa, A., Abdullah, M. A., Abdul Majeed, A. P., Mohd Razmaan, M. A., Abdullah, M. R., ... & Musa, R. M. (2022). Test-retest reliability of customised inertial measurement units (IMUs) in evaluating skateboarding related manoeuvres. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology.
- Al Kouzbary, M., Al Kouzbary, H., Liu, J., Khamis, T., Al-Hashimi, Z., Shasmin, H. N., ... & Abu Osman, N. A. (2022). Robotic Knee Prosthesis with Cycloidal Gear and Four-Bar Mechanism Optimized Using Particle Swarm Algorithm. In Actuators. MDPI, 11(9), 253.
- Hashim, N. A., Abd Razak, N. A., Shanmuganathan, T., Jaladin, R. A., Gholizadeh, H., & Osman, N. A. A. (2022). On the use of virtual reality for individuals with upper limb loss: a systematic scoping review. European journal of physical and rehabilitation medicine, 58(4), 612–620.
- Liu, J., Abu Osman, N. A., Al Kouzbary, M., Al Kouzbary, H., Abd Razak, N. A., Shasmin, H. N., & Arifin, N. (2022). Stiffness estimation of planar spiral spring based on Gaussian process regression. Scientific Reports, 12(1), 1-15.
- Liu, J., Osman, N. A. A., Kouzbary, M. A., Kouzbary, H. A., Razak, N. A. A., Shasmin, H. N., & Arifin, N. (2022). Optimization and Comparison of Typical Elastic Actuators in Powered Ankle-foot Prosthesis. International Journal of Control, Automation and Systems, 20(1), 232-242.
- Musa, R. M., Hassan, I., Abdullah, M. R., Azmi, M. N. L., Majeed, A. P. A., & Osman, N. A. A. (2022). A longitudinal analysis of injury characteristics among elite and amateur tennis players at different tournaments from electronic newspaper reports. Frontiers in Public Health, 10.
- Ngah, A. H., Kamalrulzaman, N. I., Mohamad, M. F. H., Rashid, R. A., Harun, N. O., Ariffin, N. A., & Osman, N. A. A. (2022). The sequential mediation model of students willingness to continue online learning during the COVID-19 pandemic. Research and Practice in Technology Enhanced Learning, 17(1), 1-17.
- Sobh, K. N. M., Abd Razak, N. A., & Osman, N. A. A. (2022). A FSR Sensor Cuff to Measure Muscle Activation During Strength and Gait Cycle for Lower Limb. IEEE Access, 10, 106135-106147.
- Abdullah, M. A., Ibrahim, M. A. R., Shapiee, M. N. A., Zakaria, M. A., Razman, M. A. M., Musa, R. M., ... & Majeed, A. P. A. (2021). The classification of skateboarding tricks via transfer learning pipelines. PeerJ Computer Science, 7, e680.
- Al Kouzbary, H., Al Kouzbary, M., Tham, L. K., Liu, J., Shasmin, H. N., & Osman, N. A. A. (2021). Generating an Adaptive and Robust Walking Pattern for a Prosthetic Ankle–Foot by Utilizing a Nonlinear Autoregressive Network With Exogenous Inputs. IEEE Transactions on Neural Networks and Learning Systems, 33(11), 6297-6305.
- Hashim, N. A., Abd Razak, N. A., & Osman, N. A. A. (2021). Comparison of conventional and virtual reality box and blocks tests in upper limb amputees: A case-control study. IEEE Access, 9, 76983-76990.
- Hashim, N. A., Abd Razak, N. A., Gholizadeh, H., & Osman, N. A. (2021). Video Game Based Rehabilitation Approach for Individuals Who Have Undergone Upper Limb Amputation: Case-Control Study. JMIR serious games, 9(1), e17017.
- Kes, S. K., Afifuddeen, M., Nizam, M., Abd Razak, N. A., & Abu Osman, N. A. (2021). Biomechanical Analysis of an Improvement of Prosthetic Liner using Polyurethane Focusing at the Anterior-Distal Part of Residual Limb: A Case Study. Sains Malaysiana, 50(9), 2713-2725.
- Liu, J., Abu Osman, N. A., Al Kouzbary, M., Al Kouzbary, H., Abd Razak, N. A., Shasmin, H. N., & Arifin, N. (2021). Classification and Comparison of Mechanical Design of Powered Ankle Foot Prostheses for Transtibial Amputees Developed in the 21st Century: A Systematic Review. Journal of Medical Devices, 15(1), 010801.
- Mohd Safee, M. K., & Abu Osman, N. A. (2021). Effect of lower limb muscle fatigue on fall risk for transfemoral amputee: a pilot study. Occupational therapy international, 2021.
- Musa, R. M., Abdul Majeed, A. P., Suhaimi, M. Z., Abdullah, M. R., Mohd Razman, M. A., Abdelhakim, D., & Abu Osman, N. A. (2021). Identification of high-performance volleyball players from anthropometric variables and psychological readiness: A machine-learning approach. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 237(4).
- Sobh, K. N. M., Abd Razak, N. A., & Abu Osman, N. A. (2021). Investigation of EMG parameter for transtibial prosthetic user with flexion and extension of the knee and normal walking gait: A preliminary study. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 235(4), 419-427.
- Tham, L. K., Osman, N. A. A., Al Kouzbary, M., & Aminian, K. (2021). Biomechanical Ambulatory Assessment of 3D Knee Angle Using Novel Inertial Sensor-Based Technique. IEEE Access, 9, 36559-36570.
- Tripathy, A., Sharma, P., Pramanik, S., Silva, F. S., & Osman, N. A. B. A. (2021). Armalcolite nanocomposite: A new paradigm for flexible capacitive humidity sensor. IEEE Sensors Journal, 21(13), 14685-14692.
- Al Kouzbary, M; Abu Osman, NA; Al Kouzbary, H; Shasmin, HN; Arifin, N (2020). Towards Universal Control System for Powered Ankle-Foot Prosthesis: A Simulation Study. International Journal of Fuzzy Systems, 22, 1299-1313.
- Arifin, N; Abu Osman, NA; Ali, S (2020). Postural Stability Strategies in Transtibial Amputees during Quiet Standing in Altered Sensory Conditions Wearing Three Types of Prosthetic Feet. Journal of Mechanics in Medicine and Biology, 20(2), 1950071.
- Ibrahim, N., Abu Osman, N. A., Mokhtar, A. H., Arifin, N., Usman, J., & Shasmin, H. N. (2022). Contribution of the arm segment rotations towards the horizontal ball and racket head velocities during forehand long shot and drop shot services in table tennis. Sports biomechanics, 21(9), 1065-1081.
- Khan, SJ; Khan, SS; Usman, J; Mokhtar, AH; Abu Osman, NA (2020). Orthoses versus gait retraining: Immediate response in improving physical performance measures in healthy and medial knee osteoarthritic adults. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 234(7), 749-757 .
- Mok, C. F., Ching, Y. C., Osman, N. A. A., Muhamad, F., Hai, N. D., Choo, J. H., & Hassan, C. R. (2020). Adsorbents for removal of cationic dye: nanocellulose reinforced biopolymer composites. Journal of Polymer Research, 27, 1-15.
- Mok, CF; Ching, YC; Abu Osman, NA; Muhamad, F; Junaidi, MUM; Choo, JH (2020). Preparation and characterization study on maleic acid cross-linked poly(vinyl alcohol)/chitin/nanocellulose composites. Journal of Applied Polymer Science, 137(35), 49044.
- Mok, CF; Ching, YC; Muhamad, F; Abu Osman, NA; Hai, ND; Hassan, CRC (2020). Adsorption of Dyes Using Poly(vinyl alcohol) (PVA) and PVA-Based Polymer Composite Adsorbents: A Review. Journal of Polymers and the Environment, 28, 775-793.
- Shaari, IH; Abu Osman, NA; Shasmin, HN (2020). A case study on interface pressure pattern of two garment orthoses on a child with cerebral palsy. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 234(8), 884-894.
- Touri, M; Mortarzadeh, F; Abu Osman, NA; Dehghan, MM; Milan, PB; Farzad-Mohajeri, S; Mozafari, M (2020). Oxygen-Releasing Scaffolds for Accelerated Bone Regeneration. ACS Biomaterials Science & Engineering, 6(5), 2985 2994.
- Ahmad, A; Abu Osman, NA; Mokhtar, H; Mehmood, W; Kadri, NA (2019). Analysis of the interface pressure exerted by the Cheneau brace in patients with double-curve adolescent idiopathic scoliosis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 233(9), 901-908.
- Hakamivala, A., Nojoomi, A., Aminian, A., Farzadi, A., & Osman, N. A. A. (2019). Parametric process optimization to improve the accuracy and mechanical properties of 3D printed parts. MRS Advances, 4(24), 1383-1392.
- Khan, SJ; Khan, SS; Usman, J; Mokhtar, AH; Abu Osman, NA (2019). Combined effects of knee brace, laterally wedged insoles, and toe-out gait on knee adduction moment and fall risk in moderate medial knee osteoarthritis patients. Prosthetics and Orthotics International, 43(2), 148-157.
- Mehmood, W; Abd Razak, NA; Lau, MS; Chung, TY; Gholizadeh, H; Abu Osman, NA (2019). Comparative study of the circumferential and volumetric analysis between conventional casting and three-dimensional scanning methods for transtibial socket: A preliminary study. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 233(2), 181-192.
- Sakeran, H; Abu Osman, NA; Majid, MSA (2019). Gait Classification Using Mahalanobis-Taguchi System for Health Monitoring Systems Following Anterior Cruciate Ligament Reconstruction. Applied Sciences-Basel, 9(16), 3306.
- Sakeran, H; Abu Osman, NA; Majid, MSA; Rahiman, MHF; Muhamad, WZAW; Mustafa, WA (2019). Gait Analysis and Mathematical Index-Based Health Management Following Anterior Cruciate Ligament Reconstruction. Applied Sciences-Basel, 9(21), 4680
- Touri, M; Mortarzadeh, F; Abu Osman, NA; Dehghan, MM; Mozafari, M (2019). Optimisation and biological activities of bioceramic robocast scaffolds provided with an oxygen-releasing coating for bone tissue engineering applications. Ceramics International, 45(1), 805-816.
- Al Kouzbary, M; Abu Osman, NA; Wahab, AKA (2018). Sensorless control system for assistive robotic ankle-foot. International Journal of Advanced Robotic Systems, 15(3).
- Asadi-Eydivand, M; Solati-Hashjin, M; Abu Osman, NA (2018). Mechanical behavior of calcium sulfate scaffold prototypes built by solid free-form fabrication. Rapid Prototyping Journal, 24(8), 1392-1400.
- Ghazali, MF; Abd Razak, NA; Abu Osman, NA; Gholizadeh, H (2018). Awareness, potential factors, and post-amputation care of stump flexion contractures among transtibial amputees. Turkish Journal of Physical Medicine and Rehabilitation, 64(3), 268 276.
- Hashim, NA; Abd Razak, NA; Abu Osman, NA; Gholizadeh, H (2018). Improvement on upper limb body-powered prostheses (1921-2016): A systematic review. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 232(1), 3-11.
- Khan, SJ; Khan, SS; Usman, J; Mokhtar, AH; Abu Osman, NA (2018). Combined effects of knee brace, laterally wedged insoles and toe-in gait on knee adduction moment and balance in moderate medial knee osteoarthritis patients. Gait & Posture, 61, 243-249.
- Khan, SJ; Khan, SS; Usman, J; Mokhtar, AH; Abu Osman, NA (2018). Effects of different foot progression angles and platform settings on postural stability and fall risk in healthy and medial knee osteoarthritic adults. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 232(2), 163-171.
- Shaari, IH; Abu Osman, NA; Shasmin, HN (2018). Interface Pressure of Lycra Orthosis at Different Postures in Children with Cerebral Palsy (CP). Sains Malaysiana, 47(4), 763-771.
- Touri, M., Moztarzadeh, F., Osman, N. A. A., Dehghan, M. M., & Mozafari, M. (2018). Breathable tissue engineering scaffolds: An efficient design-optimization by additive manufacturing. Materials Today: Proceedings, 5(7), 15813-15820.
- Touri, M; Mortarzadeh, F; Abu Osman, NA; Dehghan, MM; Mozafari, M (2018). 3D-printed biphasic calcium phosphate scaffolds coated with an oxygen generating system for enhancing engineered tissue survival. Materials Science Engineering C: Materials for Biological Applications, 84, 236-242.
- Tripathy, A; Sharma, P; Sahoo, N; Pramanik, S; Abu Osman, NA (2018). Moisture sensitive inimitable Armalcolite/PDMS flexible sensor: A new entry. Sensors and Actuators B: Chemical, 262, 211-220.
- Abd Razak, NA; Gholizadeh, H; Hasnan, N; Abu Osman, NA; Fadzil, SSM; Hashim, NA (2017). An anthropomorphic transhumeral prosthesis socket developed based on an oscillometric pump and controlled by force-sensitive resistor pressure signals. Biomedical Engineering / Biomedizinische Technik, 62(1), 49-55.
- Abu Osman, NA; Eshraghi, A; Gholizadeh, H; Abas, WAW; Lechler, K (2017). Prosthesis donning and doffing questionnaire: Development and validation. Prosthetics and Orthotics International, 41(6), 571-578.
- Abu Osman, NA; Gholizadeh, H; Eshraghi, A; Abas, WAW (2017). Clinical evaluation of a prosthetic suspension system: Looped silicone liner. Prosthetics and Orthotics International, 41(5), 476-483.
- Al-Fakih, E; Arifin, N; Pirouzi, G; Adikan, FRM; Shasmin, HN; Abu Osman, NA (2017). Optical fiber Bragg grating-instrumented silicone liner for interface pressure measurement within prosthetic sockets of lower-limb amputees. Journal of Biomedical Optics, 22(8), 087001.
- Ghazali, M. F., Abd Razak, N. A., Osman, N. A., & Gholizadeh, H. (2017, June). Effect of stump flexion contracture with and without prosthetic alignment intervention towards postural stability among transtibial prosthesis users. In IOP Conference Series: Materials Science and Engineering (Vol. 210, No. 1, p. 012002). IOP Publishing.
- Hashim, NA; Abd Razak, NA; Gholizadeh, H; Abu Osman, NA (2017). Analysis of voluntary opening Ottobock Hook and Hosmer Hook for upper limb prosthetics: a preliminary study. Biomedical Engineering / Biomedizinische Technik, 62(4), 447 454.
- Jasni, F; Hamzaid, NA; Syah, NEM; Chung, TY; Abu Osman, NA (2017). Analysis of Interrelationships among Voluntary and Prosthetic Leg Joint Parameters Using Cyclograms. Frontiers in Neuroscience, 11, 230.
- Jusman, Y., Ng, S. C., Hasikin, K., Kurnia, R., Abu Osman, N. A., & Teoh, K. H. (2017). A system for detection of cervical precancerous in field emission scanning electron microscope images using texture features. Journal of Innovative Optical Health Sciences, 10(02), 1650045.
- Khan, S. J., Khan, S. S., Usman, J., Mokhtar, A. H., & Osman, N. A. (2016, September). A Pilot Study on Physical Performance Measures: What is Better for Knee Osteoarthritis Patients, Orthosis or Gait Modifications?. In International Conference on Movement, Health and Exercise (pp. 163-167). Springer, Singapore.
- Mirjalili, F; Mohammadi, H; Azimi, M; Hafezi, M; Abu Osman, NA (2017). Synthesis and characterization of beta-TCP/CNT nanocomposite: Morphology, microstructure and in vitro bioactivity. Ceramics International, 43(10), 7573-7580.
- Mok, CF; Ching, YC; Muhamad, F; Abu Osman, NA; Singh, R (2017). Poly(vinyl alcohol)--chitin composites reinforced by oil palm empty fruit bunch fiber-derived nanocellulose. International Journal of Polymer Analysis and Characterization, 22(4), 294-304.
- Pirouzi, G; Abu Osman, NA; Ali, S; Makinejad, MD (2017). A new prosthetic alignment device to read and record prosthesis alignment data. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 231(12), 1127-1132.
- Tripathy, A., Pramanik, S., Manna, A., Radzi, Z., & Abu Osman, N. A. (2017). Dielectric and AC conductivity studies of porous armalcolite nanocomposite-based novel humidity sensor. Journal of The American Ceramic Society, 100(11), 5131-5140.
- Al-Fakih, E. A., Abu Osman, N. A., Adikan, F. R. M. (2016). Techniques for Interface Stress Measurements within Prosthetic Sockets of Transtibial Amputees: A Review of the Past 50 Years of Research. Sensors, 16(7), 1119.
- Al-Fakih, E. A., Abu Osman, N. A., Adikan, F. R. M., Eshraghi, A., Jahanshahi, P. 2016. Development and Validation of Fiber Bragg Grating Sensing Pad for Interface Pressure Measurements Within Prosthetic Sockets. Ieee Sensors Journal. (Tier 2, Impact Factor = 1.889)
- Al-Fakih, E. A., Abu Osman, N. A., Adikan, F. R. M., Eshraghi, A., & Jahanshahi, P. (2016). Development and Validation of Fiber Bragg Grating Sensing Pad for Interface Pressure Measurements Within Prosthetic Sockets. IEEE Sensors Journal 16(4), 965-974.
- Asadi-Eydivand, M., Solati-Hashjin, M., Farzad, A., Abu Osman, N. A. 2016. Effect of technical parameters on porous structure and strength of 3D printed calcium sulfate prototypes. Robotics and Computer-Integrated Manufacturing. (Tier 1, Impact Factor = 2.077)
- Asadi-Eydivand, M., Solati-Hashjin, M., Farzad, A., & Abu Osman, N. A. (2016). Effect of technical parameters on porous structure and strength of 3D printed calcium sulfate prototypes. Robotics and Computer-Integrated Manufacturing, 37, 57-67..
- Asadi-Eydivand, M., Solati-Hashjin, M., Fathi, A., Padashi, M., & Abu Osman, N. A. (2016). Optimal design of a 3D-printed scaffold using intelligent evolutionary algorithms. Applied Soft Computing, 39, 36-47.
- Asadi-Eydivand, M., Solati-Hashjin, M., Shafiei, S. S., Mohammadi, S., Hafezi, M., Abu Osman, N. A. 2016. Structure, Properties, and In Vitro Behavior of Heat-Treated Calcium Sulfate Scaffolds Fabricated by 3D Printing. Plos One. (Tier 1, Impact Factor = 3.057)
- Asadi-Eydivand, M., Solati-Hashjin, M., Shafiei, S. S., Mohammadi, S., Hafezi, M., & Abu Osman, N. A. (2016). Structure, Properties, and In Vitro Behavior of Heat-Treated Calcium Sulfate Scaffolds Fabricated by 3D Printing. Plos One 11, (3):e0151216.
- Daneshjoo, A., Abu Osman, N. A., Sahebozamani, M., & Yusof, A. (2016). Analysis of Jumping- Landing Manoeuvers after Different Speed Performances in Soccer Players. Plos One 10(11): e0143323
- Gholizadeh, H., Abu Osman, N. A., Eshraghi, A., Arifin, N., Chung, T. Y. (2016). A comparison of pressure distributions between two types of sockets in a bulbous stump. Prosthetics and Orthotics International, 40(4), 509-516.
- Hafezi, M., Mohammadi, H., Nadernezhad, A., Fazlali, P., Abu Osman, NA. (2016). In vitro behavior of silk fibroin-coated calcium magnesium silicate scaffolds. Journal of Advanced Materials and Processing 4(1), 12-18.
- Hafezi, M., Safarian, S., Khorasani, M. T., Abu Osman, N. A. 2016. Polyurethane/58S bioglass nanofibers: synthesis, characterization, and in vitro evaluation. Rsc Advances. (Tier 2, Impact Factor = 3.289)
- Hafezi, M., Safarian, S., Khorasani, M. T., & Abu Osman, N. A. (2016). Polyurethane/58S bioglass nanofibers: synthesis, characterization, and in vitro evaluation. RSC Advances, 6, 35815-35824.
- Jusman, Y., Isa, N. A. M., Ng, S.-C., Hasikin, K., Abu Osman, N. A. (2016). Automated cervical precancerous cells screening system based on Fourier transform infrared spectroscopy features. Journal of Biomedical Optics, 21(7), 075005.
- Jusman, Y; Ng, SC; Hasikin, K; Kurnia, R; Bin Abu Osman, NA; Teoh, KH (2016). Computer-aided screening system for cervical precancerous cells based on field emission scanning electron microscopy and energy dispersive x-ray images and spectra.Optical Engineering, 55(10), 103110.
- Ku, PX; Abu Osman, NA; Abas, WABW. (2016). The limits of stability and muscle activity in middle-aged adults during static and dynamic stance. Journal of Biomechanics, 49(16), 3943-3948.
- Manna, A., Pramanik, S., Tripathy, A., Radzi, Z., Moradi, A., Pingguan-Murphy, B., Abu Osman, N. A. (2016). Design and development of an in situ synthesized layered double hydroxide structure of Fe-induced hydroxyapatite for drug carriers. Rsc Advances, 6, 25549-25561.
- Manna, A; Pramanik, S; Tripathy, A; Moradi, A; Radzi, Z; Pingguan-Murphy, B; Hasnan, N; Abu Osman, NA (2016). Development of biocompatible hydroxyapatitepoly-(ethylene glycol) core-shell nanoparticles as an improved drug carrier: structural and electrical characterizations. RSC Advances, 6, 102853-102868.
- Razali, N., Pramanik, S., Abu Osman, N. A., Radzi, Z., Pingguan-Murphy, B. (2016). Conversion of calcite from cockle shells to bioactive nanorod hydroxyapatite for biomedical applications. Journal of Ceramic Processing Research, 17(7), 699-706.
- Shirazi, S. F. S., Gharehkhani, S., Metselaar, H. S. C., Nasiri-Tabrizi, B., Yarmand, H., Ahmadi, M., Abu Osman, N. A. (2016). Ion size, loading, and charge determine the mechanical properties, surface apatite, and cell growth of silver and tantalum doped calcium silicate. Rsc Advances, 6, 190-200.
- Tripathy A, Pramanik S, Manna A, Shah NFA, Shasmin HN, Radzi Z, Abu Osman NA. (2016). Synthesis and Characterizations of Novel Ca-Mg-Ti-Fe-Oxides Based Ceramic Nanocrystals and Flexible Film of Polydimethylsiloxane Composite with Improved Mechanical and Dielectric Properties for Sensors. Sensors 16(3), 292-313.
- Tripathy, A., Pramanik, S., Manna, A., Bhuyan, S., Shah, N. F. A., Radzi, Z., Abu Osman, N. A. (2016). Design and Development for Capacitive Humidity Sensor Applications of Lead-Free Ca,Mg,Fe,Ti-Oxides-Based Electro-Ceramics with Improved Sensing Properties via Physisorption. Sensors, 16(7), 1135.
- Tripathy, A; Pramanik, S; Manna, A; Shasmin, HN; Radzi, Z; Abu Osman, NA (2016). Uniformly Porous Nanocrystalline CaMgFe1.33Ti3O12 Ceramic Derived Electro-Ceramic Nanocomposite for Impedance Type Humidity Sensor. Sensors, 16(12), 2029.
- Abd Razak, N. A., Abu Osman, N. A., Ali, S., Gholizadeh, H., & Abas, W. W. (2015). Comparison study of the prosthetics interface pressure profile of air splint socket and ICRC polypropylene socket for upper limb prosthetics. Biocybernetics and Biomedical Engineering, 35(2), 100-105.
- Ali Akbari Ghavimi S, Ebrahimzadeh MH, Solati-Hashjin M, Abu Osman NA. (2015). Polycaprolactone/starch composite: Fabrication, structure, properties, and applications. J Biomed Mater Res Part A, 103(7), 2482 2498.
- Ali, S., Abu Osman, N. A., Razak, A., Hussain, S., & Abas, W. (2015). The effect of dermo and seal-in x5 prosthetic liners on pressure distributions and reported satisfaction during ramp ambulation in persons with transtibial limb loss. Eur. J. Phys. Rehabil. Med, 51(1), 31-37.
- Almashaqbeh, S., Al-Sheikh, B., Wan Abas, W. A. B., & Abu Osman, N. A. (2015). Lower Extremities Biomechanics of Regular Stair Climbing : Slim Versus Obese. Biomedical Engineering: Applications, Basis and Communications, 27(04), 1550036.
- Arifin, N., Abu Osman, N. A., Ali, S., Gholizadeh, H., & Wan Abas, W. A. B. (2015). Evaluation of postural steadiness in below-knee amputees when wearing different prosthetic feet during various sensory conditions using the Biodex Stability System. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 229(7), 491-498.
- Arshadi, S., Ali Azarbayjani, M., Hajiaghaalipour, F., Yusof, A., Peeri, M., Bakhtiyari, S., ... & Abu Osman, NA. (2015). Evaluation of Trigonella foenum-graecum extract in combination with swimming exercise compared to glibenclamide consumption on type 2 Diabetic rodents. Food & nutrition research, 59(1), 29717.
- Asadi-Eydivand, M., Ebadzadeh, M. M., Solati-Hashjin, M., Darlot, C., Abu Osman, N. A. (2015). Cerebellum-inspired neural network solution of the inverse kinematics problem. Biological Cybernetics, 109(6), 561-574.
- Ataollahi, F., Pramanik, S., Moradi, A., Dalilottojari, A., Pingguan Murphy, B., Wan Abas, W. A. B., & Abu Osman, N. A. (2015). Endothelial cell responses in terms of adhesion, proliferation, and morphology to stiffness of polydimethylsiloxane elastomer substrates. Journal of biomedical materials research Part A, 103(7), 2203-2213.
- Chan, B. T., Lim, E., Ong, C. W., Abu Osman, N. A. (2015). Effect of spatial inlet velocity profiles on the vortex formation pattern in a dilated left ventricle. Computer Methods in Biomechanics and Biomedical Engineering, 18(1), 90-96.
- Choudhury, D., Ay Ching, H., Mamat, A. B., Cizek, J., Abu Osman, N. A., Vrbka, M., ... & Krupka, I. (2015). Fabrication and characterization of DLC coated microdimples on hip prosthesis heads. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 103(5), 1002-1012.
- Choudhury, D; Ching, HA; Bin Mamat, A; Cizek, J; Abu Osman, NA; Vrbka, M; Hartl, M; Krupka, I 2015. Fabrication and characterization of DLC coated microdimples on hip prosthesis heads. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- El-Sayed, A. M., Hamzaid, N. A., Tan, K., & Abu Osman, N. A. (2015). Detection of prosthetic knee movement phases via in-socket sensors: A feasibility study. The Scientific World Journal, 2015, 923286.
- Eshraghi, A., Abu Osman, N. A., Gholizadeh, H., Ali, S., Abas, W. A. W. (2015). Interface Stress in Socket/Residual Limb with Transtibial Prosthetic Suspension Systems During Locomotion on Slopes and Stairs. American Journal of Physical Medicine Rehabilitation, 94(1), 1-10.
- Eshraghi, A., Abu Osman, N. A., Karimi, M. T., Gholizadeh, H., Ali, S., & Abas, W. A. B. W. (2015). Re: Re: Quantitative and Qualitative Comparison of a New Prosthetic Suspension System with Two Existing Suspension Systems for Lower Limb Amputees . American Journal of Physical Medicine & Rehabilitation 94(7):e60.
- Farzadi, A., Waran, V., Solati-Hashjin, M., Rahman, Z. A. A., Asadi, M., Abu Osman, N. A. 2015. Effect of layer printing delay on mechanical properties and dimensional accuracy of 3D printed porous prototypes in bone tissue engineering. Ceramics International.
- Farzadi, A., Waran, V., Solati-Hashjin, M., Rahman, Z. A. A., Asadi, M., & Abu Osman, N. A. (2015). Effect of layer printing delay on mechanical properties and dimensional accuracy of 3D printed porous prototypes in bone tissue engineering. Ceramics International, 41(7), 8320-8330.
- Ghavimi, S. A. A., Ebrahimzadeh, M. H., Shokrgozar, M. A., Solati-Hashjin, M., & Abu Osman, N. A. (2015). Effect of starch content on the biodegradation of polycaprolactone/starch composite for fabricating in situ pore-forming scaffolds. Polymer Testing, 43, 94-102.
- Maleki-Ghaleh, H., Hafezi, M., Hadipour, M., Nadernezhad, A., Aghaie, E., Behnamian, Y., Abu Osman, N. A. (2015). Effect of Tricalcium Magnesium Silicate Coating on the Electrochemical and Biological Behavior of Ti-6Al-4V Alloys. Plos One, 10(9): e0138454.
- Oshkour, A. A., Pramanik, S., Mehrali, M., Yau, Y. H., Tarlochan, F., Abu Osman, N. A. 2015. Mechanical and physical behavior of newly developed functionally graded materials and composites of stainless steel 316L with calcium silicate and hydroxyapatite. Journal of the Mechanical Behavior of Biomedical Materials.
- Oshkour, A. A., Talebi, H., Seyed Shirazi, S. F., Yau, Y. H., Tarlochan, F., & Abu Osman, N. A. (2015). Effect of geometrical parameters on the performance of longitudinal functionally graded femoral prostheses. Artificial organs, 39(2), 156-164.
- Oshkour, A. A., Talebi, H., Shirazi, S. F. S., Yau, Y. H., Tarlochan, F., Abu Osman, N. A. 2015. Effect of Geometrical Parameters on the Performance of Longitudinal Functionally Graded Femoral Prostheses. Artificial Organs.
- Oshkour, A.A., Pramanik, S., Mehrali, M., Yau, Y.H., Tarlochan, F., Abu Osman, N.A. (2015). Mechanical and physical behaviour of newly developed functionally graded materials and composites of stainless steel 316L with calcium silicate and hydroxyapatite. Journal of the Mechanical Behavior of Biomedical Materials 49, 321-331.
- Oshkour, A.A., Talebi, H., Shirazi, S.F.S., Yau, Y.H., Pramanik, S., Tarlochan, F., Abu Osman, N.A. (2015). Parametric study of radial functionally graded femoral prostheses with different geometries. Meccanica, 50, 1657-1678.
- Pramanik, S., Ataollahi, F., Pingguan-Murphy, B., Oshkour, A. A., & Abu Osman, N. A. (2015). In vitro study of surface modified poly (ethylene glycol)-impregnated sintered bovine bone scaffolds on human fibroblast cells. Scientific reports, 5, 9806.
- Rakib, M. I., Choudhury, I. A., Hussain, S., Abu Osman, N. A. 2015. Design and biomechanical performance analysis of a user-friendly orthotic device. Materials Design.
- Rakib, M. I., Choudhury, I. A., Hussain, S., & Abu Osman, N. A. (2015). Design and biomechanical performance analysis of a user-friendly orthotic device. Materials & Design (1980-2015), 65, 716-725.
- Shafiei, S. S., Solati-Hashjin, M., Samadikuchaksaraei, A., Kalantarinejad, R., Asadi-Eydivand, M., Abu Osman, N. A. (2015). Epigallocatechin Gallate/Layered Double Hydroxide Nanohybrids: Preparation, Characterization, and In Vitro Anti-Tumor Study. Plos One, 10(8): e0136530.
- Shirazi, F. S., Mehrali, M., Nasiri-Tabrizi, B., Baradaran, S., Gharehkhani, S., Metselaar, H. S. C., ... & Abu Osman, N. A. (2015). Mechanochemical synthesis and characterization of silver (Ag+) and tantalum (Ta5+) doped calcium silicate nanopowders. Science of Advanced Materials, 7(12), 2664-2671.
- Shirazi, F. S., Mehrali, M., Oshkour, A. A., Metselaar, H. S. C., Kadri, N. A., Abu Osman, N. A. (2015). Characterization and Mechanical Properties of Calcium Silicate/Citric Acid-Based Polymer Composite Materials. International Journal of Applied Ceramic Technology, 12(2), 371-376.
- Shirazi, S. F. S., Gharehkhani, S., Mehrali, M., Yarmand, H., Metselaar, H. S. C., Kadri, N. A., Abu Osman, N. A. 2015. A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing. Science and Technology of Advanced Materials.
- Shirazi, S. F. S., Gharehkhani, S., Mehrali, M., Yarmand, H., Metselaar, H. S. C., Kadri, N. A., & Abu Osman, N. A. (2015). A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing. Science and technology of advanced materials, 16(3), 033502.
- Abd Razak, N. A., Abu Osman, N. A., Gholizadeh, H., & Ali, S. (2014). Biomechanics principle of elbow joint for transhumeral prostheses: comparison of normal hand, body-powered, myoelectric & air splint prostheses. Biomedical engineering online, 13(1), 1-12.
- Abd Razak, N. A., Abu Osman, N. A., Gholizadeh, H., & Ali, S. (2014). Development and performance of a new prosthesis system using ultrasonic sensor for wrist movements: a preliminary study. Biomedical engineering online, 13(1), 49.
- Abd Razak, N. A., Abu Osman, N. A., Gholizadeh, H., & Ali, S. (2014). Prosthetics socket that incorporates an air splint system focusing on dynamic interface pressure. Biomedical engineering online, 13(1), 108.
- Ali, S., Abu Osman, N. A., Arifin, N., Gholizadeh, H., Abd Razak, N. A., & Wan Abas, W. A. B. (2014). Comparative study between dermo, pelite, and seal-in x5 liners: Effect on patient s satisfaction and perceived problems. The Scientific World Journal, 2014.
- Arifin, N., Abu Osman, N. A., & Abas, W. A. B. W. (2014). Intrarater test-retest reliability of static and dynamic stability indexes measurement using the Biodex Stability System during unilateral stance. Journal of applied biomechanics, 30(2), 300-304.
- Arifin, N., Abu Osman, N. A., Ali, S., & Abas, W. A. B. W. (2014). The effects of prosthetic foot type and visual alteration on postural steadiness in below-knee amputees. Biomedical engineering online, 13, 23.
- Arifin, N., Abu Osman, N. A., Ali, S., Gholizadeh, H., & Wan Abas, W. A. B. (2014). Postural stability characteristics of transtibial amputees wearing different prosthetic foot types when standing on various support surfaces. The Scientific World Journal, 2014.
- Asadi-Eydivand, M., Solati-Hashjin, M., Farzadi, A., & Abu Osman, N. A. (2014). Artificial neural network approach to estimate the composition of chemically synthesized biphasic calcium phosphate powders. Ceramics International, 40(8), 12439-12448.
- Ataollahi Oshkour, A., Talebi, H., Seyed Shirazi, S. F., Bayat, M., Yau, Y. H., Tarlochan, F., & Abu Osman, N. A. (2014). Comparison of various functionally graded femoral prostheses by finite element analysis. The Scientific World Journal, 2014.
- Ataollahi, F., Pingguan-Murphy, B., Moradi, A., Abas, W. A. B. W., Chua, K. H., & Abu Osman, N. A. (2014). New method for the isolation of endothelial cells from large vessels. Cytotherapy, 16(8), 1145-1152.
- Ching, H. A., Choudhury, D., Julkernine, Md., Abu Osman, N. A., (2014). Effects of Surface Coating On Reducing Friction And Wear Of Orthopaedic Implants: A Review. Science and Technology of Advanced Meterials. 15(1): 014402
- Das, N. S., Usman, J., Choudhury, D., & Abu Osman, N. A. (2014). Nature and pattern of cricket injuries: the Asian Cricket Council under-19, Elite Cup, 2013. PloS one, 9(6), e100028.
- El-Sayed, A. M., Hamzaid, N. A., & Abu Osman, N. A. (2014). Technology efficacy in active prosthetic knees for transfemoral amputees: a quantitative evaluation. The Scientific World Journal, 2014.
- Eshraghi, A., Abu Osman, N. A., Karimi, M., Gholizadeh, H., Soodmand, E., & Abas, W. A. B. W. (2014). Gait biomechanics of individuals with transtibial amputation: effect of suspension system. PloS one, 9(5), e96988.
- Farzadi, A., Bakhshi, F., Solati-Hashjin, M., Asadi-Eydivand, M., & Abu Osman, N. A. (2014). Magnesium incorporated hydroxyapatite: Synthesis and structural properties characterization. Ceramics International, 40(4), 6021-6029.
- Farzadi, A., Solati-Hashjin, M., Asadi-Eydivand, M., & Abu Osman, N. A. (2014). Effect of layer thickness and printing orientation on mechanical properties and dimensional accuracy of 3D printed porous samples for bone tissue engineering. PloS one, 9(9), e108252.
- Gholizadeh H, Abu Osman NA, Eshraghi A, Ali S (2014). Transfemoral Prosthesis Suspension Systems. A Systematic Review of the Literature. American Journal of Physical Medicine & Rehabilitation. 93 (9):809- 823
- Gholizadeh, H, Abu Osman, NA, Eshraghi, A, Ali, S, Arifin, N, Abas, WAW.(2014) Evaluation of new suspension system for limb prosthetics. Biomedical Engineering Online 13(1).
- Gholizadeh, H., Abu Osman, N. A., Eshraghi, A., & Abd Razak, N. A. (2014). Clinical implication of interface pressure for a new prosthetic suspension system. Biomedical engineering online, 13(1), 89.
- Gholizadeh, H., Abu Osman, N. A., Eshraghi, A., & Ali, S. (2014). The effects of suction and pin/lock suspension systems on transtibial amputees gait performance. PloS one, 9(5), e94520.
- Khalaj, N., Abu Osman, N. A., Mokhtar, A. H., George, J., & Wan Abas, W. A. B. (2014). Effect of intra-articular hyaluronic injection on postural stability and risk of fall in patients with bilateral knee osteoarthritis. The scientific world journal, 2014. ID 815184
- Khalaj, N., Abu Osman, N. A., Mokhtar, A. H., Mehdikhani, M., & Abas, W. A. B. W. (2014). Balance and risk of fall in individuals with bilateral mild and moderate knee osteoarthritis. PloS one, 9(3), e92270.
- Khalaj, N., Abu Osman, N. A., Mokhtar, A. H., Mehdikhani, M., & Wan Abas, W. A. (2014). Effect of exercise and gait retraining on knee adduction moment in people with knee osteoarthritis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 228(2), 190-199.
- Ku, P. X., Abu Osman, N. A., & Wan Abas, W.A.B., (2014). Balance control in lower extremity amputees during quiet standing: A systematic review. Gait and Posture. 39(2), 672-682.
- Mehdikhani, M., Behtash, H., Ganjavian, M. S., Abu Osman, N. A., & Khalaj, N. (2014). Treatment stability of Milwaukee brace in idiopathic hyperkyphosis. Prosthetics and Orthotics International, 38(4), 316-320.
- Mehrali, M., Moghaddam, E., Shirazi, S. F. S., Baradaran, S., Mehrali, M., Latibari, S. T., ... & Abu Osman, N. A. (2014). Mechanical and in vitro biological performance of graphene nanoplatelets reinforced calcium silicate composite. PLoS One, 9(9), e106802.
- Mehrali, M., Moghaddam, E., Shirazi, S. F. S., Baradaran, S., Mehrali, M., Latibari, S. T., ... & Abu Osman, N. A. (2014). Synthesis, mechanical properties, and in vitro biocompatibility with osteoblasts of calcium silicate reduced graphene oxide composites. ACS Applied Materials & Interfaces, 6(6), 3947-3962.
- Mehrali, M., Shirazi, S. F. S., Baradaran, S., Mehrali, M., Metselaar, H. S. C., Kadri, N. A. B., & Abu Osman, N. A. (2014). Facile synthesis of calcium silicate hydrate using sodium dodecyl sulfate as a surfactant assisted by ultrasonic irradiation. Ultrasonics sonochemistry, 21(2), 735-742.
- Moo, E. K., Han, S. K., Federico, S., Sibole, S. C., Jinha, A., Abu Osman, N. A., ... & Herzog, W. (2014). Extracellular matrix integrity affects the mechanical behaviour of in-situ chondrocytes under compression. Journal of Biomechanics, 47(5), 1004-1013.
- Mortaza, N., Abu Osman, N. A., & Mehdikhani, N. (2014). Are the spatio-temporal parameters of gait capable of distinguishing a faller from a non-faller elderly. Eur J Phys Rehabil Med, 50(6), 677-691.
- Nine, M. J., Choudhury, D., Hee, A. C., Mootanah, R., & Abu Osman, N. A. (2014). Wear debris characterization and corresponding biological response: artificial hip and knee joints. Materials, 7(2), 980-1016.
- Nine, M. J., Chung, H., Tanshen, M. R., Abu Osman, N. A., & Jeong, H. (2014). Is metal nanofluid reliable as heat carrier?. Journal of hazardous materials, 273, 183-191.
- Oshkour, A. A., Abu Osman, N. A., Bayat, M., Afshar, R., & Berto, F. (2014). Three-dimensional finite element analyses of functionally graded femoral prostheses with different geometrical configurations. Materials & Design (1980-2015), 56, 998-1008.
- Pirouzi, G., Abu Osman, N. A., Eshraghi, A., Ali, S., Gholizadeh, H., & Wan Abas, W. A. B. (2014). Review of the socket design and interface pressure measurement for transtibial prosthesis. The scientific World journal, 2014.
- Pirouzi, G., Abu Osman, N. A., Oshkour, A. A., Ali, S., Gholizadeh, H., & Wan Abas, W. A. (2014). Development of an air pneumatic suspension system for transtibial prostheses. Sensors, 14(9), 16754-16765.
- Pramanik, S., Pingguan-Murphy, B., Cho, J., & Abu Osman, N. A. (2014). Design and development of potential tissue engineering scaffolds from structurally different longitudinal parts of a bovine-femur. Scientific reports, 4, 5843.
- Rad, A. T., Solati-Hashjin, M., Abu Osman, N. A., & Faghihi, S. (2014). Improved bio-physical performance of hydroxyapatite coatings obtained by electrophoretic deposition at dynamic voltage. Ceramics International, 40(8), 12681-12691.
- Safaeepour, Z., Esteki, A., Ghomshe, F. T., & Abu Osman, N. A. (2014). Quantitative analysis of human ankle characteristics at different gait phases and speeds for utilizing in ankle-foot prosthetic design. Biomedical engineering online, 13(1), 1-8.
- Shirazi, F. S., Mehrali, M., Oshkour, A. A., Metselaar, H. S. C., Kadri, N. A., & Abu Osman, N. A. (2014). Mechanical and physical properties of calcium silicate/alumina composite for biomedical engineering applications. journal of the mechanical behavior of biomedical materials, 30, 168-175.
- Tripathy, A., Pramanik, S., Cho, J., Santhosh, J., & Abu Osman, N. A. (2014). Role of morphological structure, doping, and coating of different materials in the sensing characteristics of humidity sensors. Sensors, 14(9), 16343-16422.
- A. Eshraghi, N.A Abu Osman, H. Gholizadeh , J. Ahmadian , B. Rahmati and W.A.B. Wan Abas (2013). Development and Evaluation of New Coupling System for Lower Limb Prostheses with Acoustic Alarm System. Scientific Reports.3:2270
- A.A. Oshkour, N.A. Abu Osman, M.M. Davoodi, Y.H. Yau, F. Tarlochan, W.A.B Wan Abas, M. Bayat (2013). Finite element analysis on longitudinal and radial functionally graded femoral prosthesis. International Journal for Numerical Methods in Biomedical Engineering 29(12):1412-27
- A.A. Oshkour, N.A. Abu Osman, Y.H. Yau, F. Tarlochan, S. Pramanik, W.A.B Wan Abas. (2013). Internal-external circumferential crack behavior in the cement layer of total hip replacement. Fatigue & Fracture of Engineering Materials & Structures. 36(7):586 601
- A.Y.Bani Hashim, N.A.Abu Osman, W.A.B.Wan Abas, L.Abdul Latif(2013) Approximating the relationship among the degree of the reaction forces and the nodes on footprint during a stance phase. Applied Mathematical Modelling. Vol 37:258-264
- Al-Fakih EA, Osman NAA, Eshraghi A, Adikan FRM (2013). The Capability of Fiber Bragg Grating Sensors to Measure Amputees Trans-Tibial Stump/Socket Interface Pressures. Sensors 13(8):10348-10357
- Amr M. El-Sayed, Ahmed Abo-Ismail, Moumen T. El- Melegy, Nur Azah Hamzaid, Noor Azuan Abu Osman (2013).Development of a Micro-Gripper Using Piezoelectric Bimorphs. Sensors 13(5):5826-5840.
- Annapoorna Chadrasekhar, Noor Azuan Abu Osman, Lai Kuan Tham, Kheng Seang Lim, Wan Abu Bakar Wan Abas (2013). Influence of age on patellar tendon reflex response. Plos One 8(11):e80799
- Arezoo Eshraghi, Noor Azuan Abu Osman, Hossein Gholizadeh, Sadeeq Ali and Babak Shadgan(2013). 100 top-cited scientific papers in limb prosthetics.BioMedical Engineering OnLine 12:119
- Azim Ataollahi Oshkour, N.A. Abu Osman, Y.H. Yau, F. Tarlochan, W.A.B Wan Abas. (2013) Design of new generation femoral prostheses using functionally graded materials: A finite element analysis.Proceedings of the Institution of Mechanical Engineers, Part H, Journal of Engineering in Medicine. Vol 227(1):3-17.
- Azim Ataollahi Oshkour,Majid Davoodi Makinejad, N.A. Abu Osman, Y.H. Yau, F. Tarlochan, W.A.B Wan Abas (2013). Finite Element Analysis of Circumferential Crack Behavior in Cement-Femoral Prosthesis Interface. Materials and Design.49:96-102
- B. T. Chan, E. Lim, K. H. Chee, N. A. Abu Osman. (2013). Review on CFD simulation in heart with dilated cardiomyopathy and myocardial infarction. Computers in Biology and Medicine Vol 43 (4). pp 377-385
- B. T. Chan, N. A. A. Osman, E. Lim, K. H. Chee, Y. F. A. Aziz, A. Al Abed, N. H. Lovell, S. Dokos. (2013). Sensitivity analysis of left ventricle with dilated cardiomyopathy in fluid structure simulation PLOS ONE. Vol 8(6)e67097
- C. W. Ong, S. Dokos, B. T. Chan, E. Lim, A. A. Abed, N. A. Abu Osman, S. Kadiman, N. Lovell. (2013). Numerical investigation of the effect of cannula placement on thrombosis. Theoretical Biology and Medical Modelling. 10:35
- E.K Moo, N.A Abu Osman, B Pingguan- Murphy and W.Herzog (2013). Dual Photon Excitation Microscopy and Image Threshold Segmentation in Live Cell Imaging during Compression Testing. Journal of Biomechanics 46 (12):2024-2031
- Eng Kuan Moo, Matthias Amrein, Marcelo Epstein, Mike Duvall, Noor Azuan Abu Osman, Belinda Pingguan- Murphy, and Walter Herzog (2013). The properties of chondrocyte membrane reservoirs and their role in impact-induced cell death. Biophysical Journal 105 (7):1590-1600
- Eshraghi, A., Abu Osman, N. A., Gholizadeh, H., Ali, S., S varsson, S. K., & Wan Abas, W. A. B. (2013). An experimental study of the interface pressure profile during level walking of a new suspension system for lower limb amputees. Clinical Biomechanics, 28(1):55- 60.
- Eshraghi, Arezoo; Maroufi, Nader; Sanjari, Mohammad Ali; saeedi, hassan; Keyhani, Mohammad Reza; Gholizadeh, Hossein; Abu Osman, Noor Azuan (2013). Effect of Milwaukee brace on static and dynamic balance of female hyperkyphotic adolescents. Prosthetics & Orthotics International. Vol 37 (1). pp 76-84
- Forough Ataollahi, Mehrdad Mohri; Hesam Seifi; Belinda Pingguan Murphy; Wan Abu Bakar Wan Abas; Noor Azuan Abu Osman (2013). Evaluation of Copper Concentration in Subclinical Cases of White Muscle Disease and Its Relationship with Cardiac Troponin I.PLOS ONE Vol 8(2)pp e56163
- Gholizadeh H, Abu Osman NA, Eshraghi A, Ali S, Yahyavi ES (2013). Satisfaction and problems experienced with transfemoral suspension systems: a comparison between common suction socket and Seal-In liner. Archives of Physical Medicine and Rehabilitation. Vol 94 (8):1584-9
- Herman Shah Abd Rahman, Dipankar Choudhury, Noor Azuan Abu Osman, Hanie Nadia Shasmin & Wan Abu Bakar Wan Abas. 2013. In vivo and in vitro outcomes of alumina, zirconia and their composited ceramic-on-ceramic hip joints. Journal of the Ceramic Society of Japan 121(4): 382-387
- L.K Tham, N.A Abu Osman, W.A.B Wan Abas and K.S Lim (2013). Motion Analysis of normal Patellar Tendon Reflex. Canadian Journal of Neurological Sciences.40 (6):836-841
- Lai Kuan Tham, Noor Azuan Abu Osman, Wan Abu Bakar Wan Abas, Kheng Seang Lim (2013). The validity and reliability of motion analysis in patellar tendon reflex assessment.PLOS ONE Vol 8(2) pp e55702
- M.M. Davoodi, N.A Abu Osman, W.A.B Wan Abas and M. Bayat (2013). Preliminary analysis of knee stress in full extension landing. Clinics. 68(9): 1180 1188
- Mehrali M, Shirazi FS, Mehrali M, Metselaar HSC, Kadri NAB, Osman NAA. 2013. Dental implants from functionally graded materials. J Biomed Mater Res Part A 101(10):3046 3057.
- Mobini, S; Solati-Hashjin, M; Peirovi, H; Abu Osman, NA; Gholipourmalekabadi, M; Barati, M; Samadikuchaksaraei, A (2013). Bioactivity and Biocompatibility Studies on Silk-Based Scaffold for Bone Tissue Engineering. Journal Of Medical And Biological Engineering.33(2):207-213.
- N.A Abd Razak, N.A Abu Osman and W.A.B Wan Abas.(2013) Kinematic Comparison of the Wrist Movements that are Possible with a Biomechatronics Wrist Prosthesis and a Body-powered Prosthesis. Disability and Rehabilitation: Assistive Technology. Vol.8(3):255-260
- Niyousha Mortaza, Noor Azuan Abu Osman, Ali Ashraf Jamshidi, Javad Razjouyan (2013).Influence of Functional Knee Bracing on the Isokinetic and Functional Tests of Anterior Cruciate Ligament Deficient Patients. PLOSONE Vol.8(5)pp e64308
- Sadeeq Ali, Noor Azuan Abu Osman, Arezoo Eshraghi, Hossein Gholizadeh, Nasrul Anuar Abd Razak, Wan Abu Bakar Wan Abas (2013). Interface pressure in transtibial socket during ascent and descent on stairs and its effect on patient satisfaction. Clinical Biomechanics 28(9-10):994-999
- Saied Jalal Aboodarda, Ashril Yusof, N.A. Abu Osman, Martin W. Thompson, A. Halim Mokhtar.(2013) Enhanced performance with elastic resistance during the eccentric phase of a countermovement jump International Journal of Sports Physiology and Performance. Vol 8(2):181-187
- Shandiz MA, Farahmand F, Abu Osman NA, Zohoor H (2013). A Robotic Model of Transfemoral Amputee Locomotion for Design Optimization of Knee Controllers. INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS. Volume: 10 (161) DOI: 10.5772/52855.
- Sumit Pramanik, Belinda Pingguan-Murphy, and Noor Azuan Abu Osman (2013). Developments of Immobilized Surface Modified Piezoelectric Crystal Biosensors for Advanced Applications. International Journal of Electrochemical Science. Vol.8(6):8863-8892
- A. Eshraghi, N.A Abu Osman, H. Gholizadeh, M.Karimi, S.Ali.(2012). Pistoning Assessment in Lower Limb Prosthetic Sockets: A Literature Review. Prosthetics and Orthotics International. 36(1); 15-24
- Al-Fakih E., Abu Osman N.A., Mahamd Adikan F.R. (2012) The Use of Fiber Bragg Grating Sensors in Biomechanics and Rehabilitation Applications: The State-of-the-Art and Ongoing Research Topics. Sensors. 12(10):12890-12926.
- Ay Ching Hee, Mehdi Mehrali, Hendrik Simon Cornelis Metselaar, Mohammad Mehrali and Noor Azuan Abu Osman (2012). Comparison of Nanostructured Nickel Zinc Ferrite and Magnesium Copper Zinc Ferrite Prepared by Water-In-Oil Microemulsion. Electronic Materials Letters. Vol 8(6). pp 639-642
- E.K Moo, W.Herzog, S.K Han, N.A Abu Osman, B.Pingguan-Murphy and S.Federico (2012). Mechanical Behavior of in-sitChondrocytes Subjected to Different Loading Rates: A Finite Element Study. Biomechanics and Modelling in Mechanobiology. 11 (7), pp 983-993. DOI: 10.1007/s10237-011-0367-2
- Eshraghi, A., Osman, N. A. A., Karimi, M. T., Gholizadeh, H., Ali, S., & Abas, W. A. B. W. (2012). Quantitative and qualitative comparison of a new prosthetic suspension system with two existing suspension systems for lower limb amputees. American Journal of Physical Medicine & Rehabilitation, 91(12), 1028-1038.
- H. Gholizadeh, N.A. Abu Osman, M. Kamyab, A.Eshragi, W.A.B. Wan Abas and M.N.Azam. (2012). "Transtibial prosthetic socket pistoning: Static evaluation of Seal-In X5 and Dermo Liner using motion analysis system". Clinical Biomechanics. 27(1),34-39
- H. Gholizadeh, N.A.Abu Osman, M.Kamyab, A.Eshraghi, .G.Lv d ttir, W.A.B. Wan Abas (2012). Clinical Evaluation of Two Prosthetic Suspension Systems in a Bilateral Transtibial Amputee. American Journal of Physical Medicine & Rehabilitation.Vol 91(10):894-898 doi: 10.1097/PHM.0b013e31823c74d7
- H. Gholizadeh. N.A Abu Osman, A. Eshraghi. S.Ali, S.K Saevarsson and W.A.B Wan Abas. (2012). Transtibial prosthetic suspension : less pistoning versus easy donning and doffing. Journal of Rehabilitation Research & Development.Vol 49(9):1321-30
- H.Gholizadeh,N.A.Abu Osman and A.Eshraghi.(2012).Effect of Vacuum-assisted Socket and Pin Suspensions on Socket Fit. Archives of Physical Medicine and Rehabilitation. Vol.93(3).pp 921-922.
- Ku PX, Abu Osman NA, Yusof A, Wan Abas WAB (2012) The Effect on Human Balance of Standing with Toe- Extension. PLoS ONE. Vol.7(7):e41539 pp 1-5. doi:10.1371/journal.pone.0041539
- M.M.Davoodi, S.M.Sapuan, A.Aidy, N.A.Abu Osman, A.A.Oshkour, W.A.B.Wan Abas.(2012)Development Process of New Bumper Beam for Passenger Car: A Review. Materials and Design. Vol.:40. pp: 304-313. DOI: 10.1016/j.matdes.2012.03.060
- Niyousha Mortaza, Ismail Ebrahimi, Ali Ashraf Jamshidi, Vahid Abdollah, Mohammad Kamali, Wan Abu Bakar Wan Abas, Noor Azuan Abu Osman. (2012) The Effects of a Prophylactic Knee Brace and Two Neoprene Knee Sleeves on the Performance of Healthy Athletes: A Crossover Randomized Controlled Trial. PLOS ONE. Vol 7(11). pp e50110. DOI: 10.1371/journal.pone.0050110
- P.X. Ku, N.A Abu Osman, A.Yusof and W.A.B Wan Abas. (2012). Biomechanical Evaluation of the Relationship between Postural Control and Body Mass Index. Journal of Biomechanics. Vol. 45(9) pp 1638-1642. http://dx.doi.org/10.1016/j.jbiomech.2012.03.029
- Pramanik S, Pingguan-Murphy B & Abu Osman N.A. (2012) Progress of key strategies in development of electrospun scaffolds: bone tissue. Sci. Technol. Adv. Mater. Vol.13 (4)043002 doi:10.1088/1468- 6996/13/4/043002
- R.Dhakshyani, Y.Nukman,N.A.Abu Osman (2012). Rapid prototyping models for dysplastic hip surgeries in Malaysia. Eur J Orthop Surg Traumatol. 22(1), 41-46. DOI 10.1007/s00590-011-0778-x
- Ratnadurai Dhakshyani, Yusoff Nukman, Abu Osman Noor Azuan, (2012) "FDM models and FEA in dysplastic hip", Rapid Prototyping Journal, Vol.18 (3). pp 215 - 221 DOI: 10.1108/13552541211218144
- Razman R, Cheong JPG, Wan Abas WAB, Abu Osman NA. 2012. Anthropometric and strength characteristics of tenpin bowlers with different playing abilities. Biol Sport; 29(1):33-38
- S. Ali, N.A Abu Osman, M.M Naqshbandi, A. Eshraghi, PhD; M. Kamyab, H. Gholizadeh. (2012). Qualitative Study of Prosthetic Suspension Systems on Individuals with Transtibial Amputation's Satisfaction and Perceived Problems with Their Prosthetic Devices. Archives of Physical Medicine and Rehabilitation. Vol 93. pp 1919-1923. doi:10.1016/j.apmr.2012.04.024
- S.Ali; N.A.Abu Osman, N.Mortaza; A.Eshraghi; H. Gholizadeh, W.A.B.Wan Abas. (2012). "Clinical Investigation of the Interface Pressure in the Trans Tibial Socket with Dermo and Seal-In X5 Liners During Walking and Their Effect on Patient Satisfaction". Clinical Biomechanics. Vol 27. pp 943-948. doi:10.1016/j.clinbiomech.2012.06.004
- Safee M.K.M, Abas W.A.B.W, Osman N.A.A, Ibrahim F. (2012).Electromyographic Activity of the Lower Limb Muscles during Salats and Specified Exercises.The Journal of Physical Therapy Science. Vol. 24 (6). pp 549-552
- Sumit Pramanik, Asyikin Sasha Mohd Hanif, Belinda Pingguan-Murphy and Noor Azuan Abu Osman(2013). Morphological Change of Heat Treated Bovine Bone: A Comparative Study. Materials. Vol 6:65-75.
- A.Eshraghi, H. Gholizadeh, and N.A. Abu Osman. (2011). "Comments on Assessment of amputee socket-stump-residual bone kinematics during strenuous activities using Dynamic Roentgen Stereogrammetric Analysis". Journal of Biomechanics. Vol.44 (16),pp 2851-2852
- E.K.Moo, N.A.Abu Osman and B.Pingguan-Murphy. (2011). The Metabolic Dynamics of Cartilage Explants over a Long-Term Culture Period. Clinics. vol.66(8): pp.1431-1436.
- Gholizadeh H, Abu Osman N.A, .G. L v d ttir, A. Eshraghi, M. Kamyab, W.A.B. Wan Abas, (2011) A new approach for the pistoning measurement in transtibial prosthesis. Prosthetics and Orthotics International. Vol.35 (4) pp 366-370
- Khorasani, MA; Abu Osman, NA; and Yusof, A. (2011).Acute Effect of Static and Dynamic Stretching on Hip Dynamic Range of Motion (DROM) during Instep Kicking in Professional Soccer Players" Journal of Strength and Conditioning Research. Vol. 6 (6)pp. 1647-1652 doi:10.1519/JSC.0b013e3181db9f41
- Khorasani, MA; Abu Osman, NA; and Yusof, A. (2011) Biomechanical Responses of Thigh and Lower Leg during 10 Consecutive Soccer Instep Kicks. Journal of Strength and Conditioning Research. Vol. 25(4),pp 1177-1181 doi: 10.1519/JSC.0b013e3181d6508c
- L.K Tham, N.A Abu Osman, K.S Lim, B. Pingguan-Murphy, W.A.B Wan Abas,and N. Mohd Zain.(2011) Investigation to predict patellar tendon reflex using motion analysis technique.Medical Engineering & Physics. Vol. 33(4). pp 407-411 doi:10.1016/j.medengphy.2010.11.002
- N.Yusoff, N.A.Abu Osman, Belinda Pingguan-Murphy.(2011). Design and Validation of a Bi-axial Loading Bioreactor for Mechanical Stimulation of Engineered Cartilage. Medical Engineering & Physics. Vol. 33(6) pp. 782-788. doi:10.1016/j.medengphy.2011.01.013
- R. Dhakshyani, Y. Nukman, N. A. Abu Osman and C. Vijay (2011). Preliminary report: rapid prototyping models for Dysplastic hip surgery.Central European Journal of Medicine. Vol.6(3). pp.266-270. DOI: 10.2478/s11536- 011-0012-6
- K R Dhakshyani, Y Nukman, N A Abu Osman, A M Merican and J George (2010). Rapid Prototyping Medical Models for Dysplastic Hip Orthopaedic Surgery . Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture. Vol 224:5, pp769- 776. (DOI 10.1243/09544054JEM1785) (ISI-Cited Publication)
- Khorasani, MA; Abu Osman, NA; and Yusof, A. (2010), Achieve Performance Stability during Soccer Instep Kicking. Journal of Human Kinetics. Vol.23. pp. 15-20
- Khorasani, MA; Abu Osman, NA; and Yusof, A. (2010), Electromyography Assessments of the Vastus Medialis Muscle during Soccer Instep Kicking between Dynamic and Static Stretching. Journal of Human Kinetics. Vol. 24, pp 35-42
- N A Abu Osman, W D Spence, S E Solomonidis, J P Paul and A M Weir (2010). Transducers for the determination of the pressure and shear stress distribution at the stump socket interface of trans-tibial amputees. Proc. IMechE, Part B: J. Engineering Manufacture, 2010, 224 (B8), 1239-1250. DOI: 10.1243/09544054JEM1820
- N. A. Abu Osman, W.D.Spence, S.E.Solomonidis, J.P Paul, and A.M. Weir (2010). The patellar tendon bar! Is it a necessary feature? Medical Engineering & Physics. Vol.32(7) pp.760-765 DOI: doi:10.1016/j.medengphy.2010.04.020)
- E.K Moo, N.A Abu Osman, B Pingguan-Murphy, W.A.B Wan Abas, W.D Spence and S.E Solomonidis (2009). Interface Pressure Profile Analysis for Patellar-Tendon-Bearing Socket and Hydrostatic Socket. Acta of Bioengineering and Biomechanics. Vol.11(4).pp 37-43.
- Khorasani, MA; Abu Osman, NA; and Yusof, A. . 2009. Biomechanical Responds of Instep Kick between Different Positions in Professional Soccer Players. Journal of Human Kinetics. vol. 22, pp 21-27.
- N. A Abu Osman, S. Yahud and S. Y Goh (2008) Development of Mechanical Prosthetic Hand System for BCI Application , Eur J of Scientific Research. Vol 20, no. 4: pp 863-870, 2008. ISSN: 1450- 216X.
- Z. Radzi, N.H. Abu Kasim, N.A. Yahya, N.A. Abu Osman (2008) Relationship Of The Light Intensity Of Selected Light Curing Units With Varying Distance And Angulation Of The Light Curing Tip And Lightmeter , Annal Dent. 15, No 1:; 15(J ): pp 33-39. ISSN 0128- 7532
- A.A. Sharizli, F.A. Zabir, N.A Abu Osman, Z. Radzi and A.A. Shaifizul. (2007) Preliminary Design of an Automated Rapid Maxillary Expander for Dento-Facial Application , Journal of Biomechanics, Vol 40, pp 459, ISSN 0021-9290.
- H.N. Shasmin, N.A Abu Osman, L. Abd Latif, J. Usman and W.A.B. Wan Abas. (2007) A New Pylon Materials in Transtibial Prosthesis: A Preliminary Study , Journal of Biomechanics, Vol 40, pp 297, ISSN 0021-9290.
- H.N. Shasmin, N.A. Abu Osman, R. Razali, J. Usman and W.A.B Wan Abas, (2007). The Effect Of Load Carriage Among Primary School Boys . Journal of Mechanics in Medicine and Biology Vol. 7, No. 3: pp 265-274. ISSN 0219-5194.
- H.S. Abd Rahman, N.A Abu Osman, S.Yahud, T.S.Tunku Yahya and Ng Eng Seng (2007) A Study of the External Finger Fixator to Correct Flexion Deformity , Journal of Biomechanics, Vol 40, pp 183, ISSN 0021-9290.
- H.S. Abd Rahman, N.A. Abu Osman, S. Yahud, T.S. Tunku Yahya, Ng Eng Seng. 2007. A Study of the External Finger Fixator to Correct Flexion Deformity. Journal of Biomechanics. 40, S183.
- I.H. Hussin, J. Usman, W.A.B. Wan Abas and N.A Abu Osman. (2007) Body Performance Standards of Healthy Malaysians: Adult Range of Fitness Level , Journal of Biomechanics, Vol 40, pp 297, ISSN 0021-9290.
- N.A Abu Osman, D.X Wong, K.H.Ee, J C.Y. Lai, and Y.F.K. Chiew, (2007) Conflict of Services of Prosthetic Rehabilitation in Malaysia , Eur J of Scientific Research. Vol 16, no. 2: pp 273-281, ISSN: 1450-216X.
- R. Uning, N.A Abu Osman, J. Usman and W.A.B. Wan Abas. (2007) Fractal Characterisation of Gait in Parkinson s Disease Using Detrended Fluctuation Analysis , Journal of Biomechanics, Vol 40, pp 82, ISSN 0021-9290.
- 53.A A. Saifizul, Z. Zainon, N.A Abu Osman, C. A. Azlan and U.F.S Ungku Ibrahim, (2006) Intelligent Control for Self-erecting Inverted Pendulum via Adaptive Neuro-Fuzzy Inference System , American Journal of Applied Sciences 3(4): 1795-1802, 2006.
- A A. Saifizul, K. H. Loo, N.A Abu Osman and Z. Zainon, (2006) Vision based automatic steering control using a PID controller , Journal of Technology, 44(A), ISSN 0127-9696
- A A. Saifizul, S. Hosoe, N.A Abu Osman and Z Zainon, (2006). Passivity Based Control of Automated Driver based on Velocity Field, Engineering e-Transaction, Vol 1, no. 1, 2006. ISSN 1823-6379.
- R Razali, N A Abu Osman, H N Shasmin, J Usman, and W A B Wan Abas, (2006) Acceptable Load Carriage for Primary School Girls , Eur J of Scientific Research. Vol 15, no. 3: pp 396-403, 2006. ISSN: 1450-216X.
- Ramasamy, R., Juhari, M. R., Sugisaka, M., & Osman, N. A. (2007). Pneumatic artificial muscle in biomedical applications. In 3rd Kuala Lumpur International Conference on Biomedical Engineering 2006 (pp. 219-221). Springer, Berlin, Heidelberg.. ISSN 1727-1983, ISBN 978-3-540-68016-1.
- Rambely, A. S., Abu Osman, N. A., Wan Abas, W. A. B., Usman, J., & Yusof, M. S. (2003). An innovative survey poles configuration: an alternative 3-D volume calibrating system. Jurnal Teknologi. 38(A), 49-60. ISSN 0127-9696
- Abu Osman, N. A., & Mat Ghazali, R. (2002). Biomechanical evaluation on gait pattern of pregnant subjects. Journal of Mechanics in Medicine and Biology, 2(01), 99-116.
- Abu Osman, N. A., Wong, S. S., & Omar, Z. (2002). An approach for the correlation of EMG signals and the rectification of PTB sockets. Journal of Mechanics in Medicine and Biology, 2(01), 9-17.
- Abu Osman, NA; Ghazali, RM 2002. BIOMECHANICAL EVALUATION ON GAIT PATTERN OF PREGNANT SUBJECTS. JOURNAL OF MECHANICS IN MEDICINE AND BIOLOGY
- Abu Osman, NA; Wong, SS; Omar, Z 2002. AN APPROACH FOR THE CORRELATION OF EMG SIGNALS AND THE RECTIFICATION OF PTB SOCKETS. JOURNAL OF MECHANICS IN MEDICINE AND BIOLOGY
Books
- Musa, R. M., Abdul Majeed, A. P. P., Suhaimi, M. Z., Mohd Razman, M. A., Abdullah, M. R., & Abu Osman, N. A., (2021). Machine Learning in Elite Volleyball. Springer, Singapore. ISBN: 978-981-16-3192-4.
- Sapuan, S. M., Nukman, Y., Abu Osman, N. A., & Ilyas, R. A. (Eds.). (2020). Composites in Biomedical Applications. CRC Press. ISBN : 978-0-367-27168-8
- Abu Osman, N.A., Wan Abas, W.A.B., Abdul Wahab, A.K., Ting, H.N., Kadri, N.A. (Eds.) Conference Programme and Abstract Book, 5th Kuala Lumpur International Conference on Biomedical Engineering (Biomed 2011). Department of Biomedical Engineering, Faculty of Engineering, University of Malaya, Kuala Lumpur. ISBN 9789675148941
- Abu Osman, N. A., Yusof N., & Moo., E. K. (2010 ). An Integrated Approach for 3D Model. Theoretical Background. Pearson, Prentice Hall Publication. ISBN 978-967-349-035-6
- Mohd Ismail, M. A., Abu Osman, N. A. (2009). Motion Analysis System: An Integrated Approach (2nd ed.). University Malaya, Kuala Lumpur. ISBN 978-983-42035-4-2
- Kadri, N. A., Abu Osman N. A. (2001). Motion Analysis System: An Integrated Approach (180 Pages). Kuala Lumpur, KL: Univision Press
Chapter in Books
- N.A. Abu Osman, F. Ibrahim, W.A.B. Wan Abas, H.S. Abd Rahman, H.N. Ting (Eds.), (2008) International Federation for Medical and Biological Engineering Proceedings (IFMBE Proc.) Springer 2008 Vol. 21; ISBN 978-3-540-69138-9. (ISI-Cited Proc.)
- Radzi Z, Yahya NA, Abu Kasim NH, Abu Osman NA, Yusof ZYM, Mohd FN et al. Validation of Cone Beam CT Scan for Measurement of Palatal Depth in Study Casts. In: Abu Osman ed. International Federation for Medical and Biological Engineering. Berlin: Heidelberg Springer 2008 Vol. 21; 978-3- 540- 69138-9 (ISI-Cited Proc.) 758-761.
- F. Ibrahim, N.A. Abu Osman, J. Usman, and N.A. Kadri. (eds.), (2006) Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) Springer 2006 Vol. 15; ISSN 1727-1983, ISBN 978-3-540-68016. (ISI-Cited Proc.)
Article in Proceeding
- F.A. Zabir, A.S. Abdullah, N.A. Abu Osman, Z. Radzi, N.A. Yahya, and N.H. Abu Kasim, (2008), Acquiring Anatomical Representation of Human Maxilla for Rapid Maxillary Expansion. Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) Springer 2008; 21: 387-390. ISBN 978-3- 540-691389. (ISI-Cited Proc.)
- F.A. Zabir, A.S. Abdullah, N.A. Abu Osman, Z. Radzi, N.A. Yahya, and N.H. Abu Kasim, (2008),Finite Element Analysis of An Automated Rapid Maxillary Expander (ARME). Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) Springer 2008; 21: 417-420. ISBN 978-3-540-691389. (ISI-Cited Proc.)
- H. Hamzah, N.A. Abu Osman, and N. Hasnan, (2008),Comparing Manufacturer s Point Calibration and Modified Calibration Setup for F-Scan Insole Sensor System: A Preliminary Assessment Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) Springer 2008; 21: 424-427. ISBN 978-3-540-691389. (ISI-Cited Proc.)
- H.N. Shasmin, N.A. Abu Osman and L. Abd Latif, (2008),Economical Tube Adapter Material in Below Knee Prosthesis. Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) Springer 2008; 21: 407-410. ISBN 978-3-540-691389. (ISI-Cited Proc.)
- H.N. Shasmin, N.A. Abu Osman and L. Abdul Latif, (2008),Comparison between Biomechanical Characteristics of Stainless Steel and Bamboo Pylons: A Preliminary Study. Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) Springer 2008; 21: 851-853. ISBN 978-3- 540-691389. (ISI-Cited Proc.)
- H.S. Abd Rahman, N.A. Abu Osman, W.A.B. Wan Abas, T.S. Tunku Ahmad and E.S. Ng, (2008),Validation of Finite Element Analysis for a New External Finger Fixator to Correct Flexion Deformity A Preliminary Result. Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) Springer 2008; 21: 465-468. ISBN 978-3-540-691389. (ISI-Cited Proc.)
- Herman Shah Abd Rahman, N. A. Abu Osman, W. A. B. Wan Abas, T. S. Tunku Ahmad, E. S. Ng. 2008. Validation of Finite Element Analysis for a New External Finger Fixator to Correct Flexion Deformity. A Preliminary Result. 4th Kuala Lumpur International Conference on Biomedical Engineering. 21, pp 465-468.
- Kadri NA, Raha MG, Abu Osman NA, Wan Abas WAB. The First Decade of Biomedical Engineering Degree Programme at the University of Malaya: Experiences and Achievements. In N.A. Abu Osman, F. Ibrahim, W.A.B. Wan Abas, H.S. Abd Rahman, H.N. Ting (Eds.) IFMBE Proceedings (Vol. 21), 4th Kuala Lumpur International Conference on Biomedical Engineering 2008 (Biomed 2008), 25-28 June 2008, Kuala Lumpur, Malaysia. pp. 69 72
- M.A. Mohd Ismail and N.A. Abu Osman, (2008),Towards Better Understanding of Shoe-Turf Surface Induced Soccer Injuries. Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) Springer 2008; 21: 461-463. ISBN 978-3- 540-691389. (ISI-Cited Proc.)
- N.A. Kadri, M.G. Raha, N.A. Abu Osman and W.A.B. Wan Abas, (2008), The First Decade of Biomedical Engineering Degree Program at the University of Malaya: Experiences and Achievements. Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) Springer 2008; 21: 69-72. ISBN 978-3-540-691389. (ISI- Cited Proc.)
- N.S. Nahar Sham, N.A. Abu Osman and B. Pingguan- Murphy, (2008), An Alternative Coating Technique To Strengthen Pin-Bone Interface Stresses For External Fracture Fixation: A Preliminary Study. Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) Springer 2008; 21: 374-377. ISBN 978-3-540-691389. (ISI-Cited Proc.)
- S.S. Syed Shikh, N.A. Abu Osman and L. Abdul Latif, (2008),Development of an Alternative Socket Fabrication Method Using Hydrostatic Cast System: A Preliminary Study. Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) Springer 2008; 21: 766-769. ISBN 978-3- 540-691389. (ISI-Cited Proc.)
- U.A. Yusoff, Z. Radzi, N.H. Abu Kasim, N.A. Yahya and N.A. Abu Osman, (2008), The Effect of Light Curing Tip Angulations on the Shear Bond Strength of an Orthodontic Adhesive. Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) Springer 2008; 21: 354-357. ISBN 978-3- 540-691389. (ISI-Cited Proc.)
- U.H. Obaidellah, Z. Radzi, N.A. Yahya, N.A. Abu Osman, and A.F. Merican, (2008),A Finite Element Approach for the Planning and Simulation of 3D Reconstruction of Maxillofacial Deformities. Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) Springer 2008; 21: 727-730. ISBN 978-3-540-691389. (ISI-Cited Proc.)
- U.H. Obaidellah, Z. Radzi, N.A. Yahya, N.A. Abu Osman, and A.F. Merican, (2008),The Facial Soft Tissue Simulation of Orthognathic Surgery Using Biomechanical Model. Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) Springer 2008; 21: 751-753. ISBN 978-3-540-691389. (ISI-Cited Proc.)
- Uning, R., Osman, N. A., & Rahim, R. A. (2008). 3D finite element analysis of ankle-foot orthosis on patients with unilateral foot drop: a preliminary study. In 4th Kuala Lumpur International Conference on Biomedical Engineering 2008 (pp. 366-369). Springer, Berlin, Heidelberg. ISBN 978-3-540-691389. (ISI-Cited Proc.)
- Z. Radzi, N.A. Yahya, N.H. Abu Kasim, N.A. Abu Osman, Z.Y.M. Yusof, F.N. Mohd., N.H.M. Noor, M. Jamaludin, S.A. Othman, U.H. Obaidellah, N.H. Mohamed, R. Kadir, and P. Nambiar, (2008),Validation of Cone Beam CT Scan for Measurement of Palatal Depth in Study Casts. Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) Springer 2008; 21: 758-761. ISBN 978-3-540-691389. (ISI-Cited Proc.)
- A A. Saifizul, S. Hosoe, N.A Abu Osman and Z Zainon, (2006) An ANFIS Controller for Vision-based Lateral Vehicle Control System , IEEE Conf. on Automation Science and Engineering, 2006. 1-4, ISBN: 1-4214-042- 1. (ISI-Cited Proc.)
- A. Sharizli, N.A. Abu Osman, Z. Radzi, N.A. Yahya, A.A.Shaifizul, (2006), Design of an Automated Rapid Maxillary Expansion (RME) appliance. Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) Springer 2006; 15:181-183. ISSN 1727-1983, ISBN 978-3-540-68016-1. (ISI-Cited Proc.)
- H.N. Shasmin, N.A. Abu Osman, R. Razali, J. Usman and W.A.B Wan Abas, (2006),Load Carriage for School Children. Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) Springer 2006; 15: 166-169. ISSN 1727-1983, ISBN 978-3- 540-68016-1. (ISI-Cited Proc.)
- Muhammad Firdaus Hashim, Mohamed Rizon, Puteh Saad and Noor Azuan Abu Osman, (2006), Multiple Neural Networks for Human Face Recognition. Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) Springer 2006; 15: 72-76. ISSN 1727-1983, ISBN 978-3-540-68016-1. (ISI-Cited Proc.)
- R. Saiful Hasley and N.A Abu Osman, (2006), A Preliminary Case Study of Anal Retractor Usability in Anorectal Surgery. Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) Springer 2006; 15: 575-577. ISSN 1727- 1983, ISBN 978-3-540-68016-1. (ISI-Cited Proc.)
- S. Yahud and N.A. Abu Osman (2006), Development of Prosthetic Hand. Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) Springer 2006; 15: 669-672. ISSN 1727- 1983, ISBN 978-3-540-68016-1. (ISI-Cited Proc.)
- S. Yahud and N.A. Abu Osman, (2006),Prosthetic Hand for the Brain-computer Interface System. Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) Springer 2006; 15: 684-687. ISSN 1727-1983, ISBN 978-3-540-68016-1. (ISI-Cited Proc.)
- Z. Radzi, N.H. Abu Kasim, N.A. Yahya, N.A. Abu Osman, N.L. Kassim, (2006), Standardization of Distance and Angulation of Light Curing Unit Tip Using Distometer. Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) Springer 2006; 15: 136-138. ISSN 1727-1983, ISBN 978-3- 540-68016-1. (ISI-Cited Proc.)
- Azmin Sham Rambely, Noor Azuan Abu Osman, Juliana Usman, Wan Abu Bakar Wan Abas (2005). The Contribution of Upper Limb Joints in the Development of Racket Velocity in Badminton Smash. Proc.of XXIIInd International Symposium on Biomechanics in Sports ISBS; Beijing, China, 2005, pp. 322 325.
- N A Abu Osman, W.D Spence, S.E Solmonidis, A.M Muir, (2004). The patellar tendon bar the case for or against ! 11th World Congress of the International Society for Prosthetic & Orthotics. Hong Kong, 2004. pp 33 ISBN 988-97974-1-0
- N A Abu Osman, W.D Spence, S.E Solmonidis, A.M Muir, (2004). The patellar tendon bar the case for or against! ISPO UK NMS, York, England, UK. pp 16. (Award winner)
- N A Abu Osman, W.D Spence, S.E Solomonidis, A.M Muir, (2004). A simple and low cost method of producing a prosthetic socket for trans-tibial amputees. Proc. of IEE 3rd Seminar on Appropriate Medical Technology for Developing Countries. London, 2004, pp 33/1 - 33/4. ISSN 0963-3308
- N A Abu Osman, W.D Spence, S.E Solomonidis, A.M Muir, (2004). A simplified method of producing trans-tibial prosthetic socket. Kuala Lumpur International Conference on Biomedical Engineering. 2004. Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) 2004; 7: 327-328. ISBN 983-2085-68-3
- N A Abu Osman, W.D Spence, S.E Solomonidis, A.M Muir, (2004). Design and development of transducers for the measurement of trans-tibial stump/socket interface stresses. Kuala Lumpur International Conference on Biomedical Engineering. 2004. Proceedings of the International Federation for Medical and Biological Engineering (IFMBE Proc.) 2004; 7: 315-318. ISBN 983- 2085-68-3
- N A Abu Osman, W.D Spence, S.E Solomonidis, A.M Muir, (2004). Interface pressure measurement of Hydrocast and PTB sockets. 11th World Congress of the International Society for Prosthetics & Orthotics. Hong Kong, 2004. pp 32. ISBN 988-97974-1-0
- N A Abu Osman, W.D Spence, S.E Solomonidis, A.M Muir, (2003). Pressure distribution in PTB and Hydrocast sockets. A preliminary study. ISPO UK NMS, Newcastle, 2003. pp 18
- Azmin Sham Rambely, Noor Azuan Abu Osman, Juliana Usman, Wan Abu Bakar Wan Abas. (2002) An assessment of reconstruction of points for two overlapping calibrated volume: Proc. of Kuala Lumpur International Conference on Biomedical Engineering, BIOMED2002, Kuala Lumpur, Malaysia. pp 153 156
- Azmin Sham Rambely, Noor Azuan Abu Osman, Juliana Usman, Wan Abu Bakar Wan Abas. (2002) Three Dimensional Cinematographic Analysis: Enlarging A Calibrated Volume: Proc. of Biomechanics Symposia XX 2002, ISBS 2002, C res, Spain, pp 333-336
- Juliana Usman, Noor Azuan Abu Osman, Azmin Sham Rambely, Wan Abu Bakar Wan Abas. (2002) A Comparative Study on Kinematics Parameters Between The Sepak Kuda Serve and The Sepak Sila Serve in Sepak Takraw: Proc. of Biomechanics Symposia XX 2002, ISBS 2002, C res, Spain, pp 191
- Wan Abu Bakar Wan Abas, Noor Azuan Abu Osman, Azmin Sham Rambely and Juliana Usman (2002) Motion Analysis and Sports Biomechanics in Malaysia: Proc. of Kuala Lumpur International Conference on Biomedical Engineering, BIOMED2002, Kuala Lumpur pp 85 90
- Wei Xie, Kong Chuan Teh, John Tan, Michael Koh, Mohd Safrushahar Yusoff, Noor Azuan Abu Osman (2002) Biomechanical Analysis of the Men s Javelin Throw at the 21st South East Asian Games:.Proc. of Biomechanics Symposia XX 2002, ISBS 2002, C res, Spain, pp 115 117
- N A Abu Osman, S.E Solomonidis, W.D Spence, (2001).Study of the pressure distribution at the stump/socket interface in a below knee prosthesis. Proc. of Salford International Conference on Biomechanics of the lower limb in health, disease and rehabilitation, Salford, UK pp 102 103
- Noor Azuan Abu Osman and S. Ramachandran, (2001). Design, development and experimental studies of a multi-positional stewart type robot manipulator. Proc. of International Conference on Modelling and Simulation in distributed applications, China pp 445 450
- Raha Mat Ghazali and Noor Azuan Abu Osman , (2001). Biomechanical gait pattern of pregnant subjects. Proc. of Regional Conference on Higher Engineering Education 2001, RECHEEN 2001, Petaling Jaya. pp 1-4
- Wei Xei, Noor Azuan Abu Osman, Kong Chuan Teh. Wan Abu Bakar Wan Abas, Mohd Safrushahar, (2001). Overview of data collection for 3-Dimensional motion analysis during the final session of Thomas & Uber Cup 2000. Proc. of Biomechanics Symposia XIX 2001, ISBS 2001, San Francisco, USA pp 59-62
- Fatimah Ibrahim, Norita Mohd Zain, Wan Abu Bakar Wan Abas, Mohd Rafie Johan, Noor Azuan Abu Osman, S.Anandan, (2000). Electrical Engineering Components in Biomedical Engineering Curriculum. Proc. of Electrical Engineering Conference 2000, EEC 2000, Petaling Jaya pp 5
- Noor Azuan Abu Osman, (2000). Biomechanical measurement of stresses acting at the patellar tendon bar by the rectification of a PTB prosthesis socket. Proc.of National Conference On Biomedical Engineering 2000, BIOMED 2000, Petaling Jaya pp 61-63
- Wan Abu Bakar Wan Abas, Goh Sing Yau, Noor Azuan Abu Osman, S. Anandan, Fatimah Ibrahim, Norita Mohd Zin, Ng Kwan Hoong, (2000). The AS IS and WHERE TO of Bioengineering. Shah Alam, Selangor
RESEARCH INTEREST
- Biomechanics
- Motion Analysis
- Rehabilitation Engineering
RESEARCH PROJECT
National
- 2011 - 2015, High Impact Research (HIR)Biomechanical System for Hard Tissues of Normal and Disable Subjects ( Principal Investigator(PI))
- 2012 - 2015, High Impact Research (HIR)Novel Tissue Expander to Facilitate Maxillary Expansion in Treating Crossbite and Transverse Maxillary Hypoplasia ( Consultant)
- 2008Design and Development of Automated Anal Retractor for Anorectal Surgery
- 2008Development of Engineering Automated Rapid Maxillary Expander for Dento-Facial Applications
- 2008Development of Prosthetic Hand for Brain-Computer Interface (BCI) System
- 2008Development of Pylon Materials in Transtibial Prosthesis
- 2008Investigation of the Expansion pattern in ovoid and tapered shaped maxilla using Rapid maxillary Expander
- 2008Multimodal Analysis of ECG and Gait Signals for Cardiolocomotor Assessment
- 2008Study on the External Finger Fixator to Correct Flexion Deformity
- 2008The stump-socket interface stresses - Developing and manufacturing of the trans-tibial socket
- 2008Understanding the influence of silicone and gel liners on stump-socket interface stresses - developing the socket of the future
- 2007 - 2008, IPPPInvestigation of the expansion pattern in ovoid and tapered shaped maxilla using rapid maxillary expander. ( Consultant)
CONSULTANCY PROJECT
- Penemuduga Bagi Kemasukan Ke Program Pengajian Ijazah Dasar & Asasi Sesi 2014/2015, UNIVERSITY OF MALAYA01 Oct 2014 - 01 Oct 2015 (National)
- Clinical Evaluation of a Prosthetic Suspension System: Looped Silicone Liner, OSSUR, Iceland01 Oct 2014 - 01 Oct 2015 (International)
- Development of a Standard Donning and Doffing Questionnaire for Lower Limb Prosthesis - a Pilot Study, OSSUR, Iceland01 Oct 2014 - 01 Oct 2015 (International)
- Penasihat Perancangan UM-University-Industry Mri Research Collaboration Inclusive of Research Facility and 3t Mri Machine, Fakulti Perubatan, UM, PUSAT PERUBATAN UM01 Oct 2014 - 01 Oct 2014 (National)
- Majlis ICT Universiti Malaya, Univeristy of Malaya01 Oct 2014 - 01 Oct 2014 (National)
- Pemeriksa Luar Tesis, UNIVERSITI TEKNOLOGI MALAYSIA01 Oct 2013 - 01 Oct 2014 (National)
- Seal-in and Locking Liners On Gait, Pressure - and Pistoning Movement in Trans-Tibial Amputees., OSSUR, Iceland01 Oct 2010 - 01 Oct 2012 (International)
- External Examiner, Phd, Wang Chao, The Hong Kong Polytechnic University01 Oct 2012 - 01 Oct 2012 (International)
PATENT/IPR
- Prosthetic Anti-movement Valve (PAV)Patent (National)
- Measurement tool box for assessing human postural abnormalitiesPatent (National)
- Smart Mini Implant Positioner and radiograph HolderPatent (National)
- An ambulatory function monitoring systemPatent (National)
- Finger FixatorPatent (International)
- PylonPatent
- Automatic Maxillary ExpanderPatent
- Dynamic Postural Garment OrthosisPATENT
- AUTOMATED MAXILLARY EXPANDERPATENT
- AN AMBULATORY FUNCTION MONITORING SYSTEMPATENT
- Dynamic Postural Garment OrthosisPatent (National)
- An Anti-Displacement Prothetic ValvePATENT
- Stance control orthosisPATENT
- Magnetic Suspension System For Lower And Upper Limb ProsthesesPATENT
- A Limb Prosthesis Supension SystemPatent (National)
- A Magnetic Coupling Device Of A Limb ProsthesisPatent (National)
- Liner for Prosthetic LimbPatent (National)
- Device for measuring head forwardPatent (National)
- Uneven shoulders or hipsPatent (National)
- Magnetic Adaptor to Lower Limb ProsthesisPatent (National)
- Light DistometerPatent (National)