Curriculum Vitae

PROFESSOR IR. DR. ANG BEE CHIN

Professor
  • Department of Chemical Engineering
    Faculty of Engineering
  • amelynang
  • 79675258

BIOGRAPHY


 

 

Prof. Ir. Dr. Ang Bee Chin is an accomplished researcher and academic with a strong background in Materials Engineering. Her academic journey culminated in her Ph.D from Universiti Malaya in 2011, where she was also a scholarship recipient. Currently holding the prestigious position of Professor in the Department of Chemical Engineering within the Faculty of Engineering at Universiti Malaya, she stands as a beacon of expertise and leadership in her field. 

Dr. Ang's professional qualifications include being a Chartered Engineer (C.Eng) since 2014, accredited by the Institution of Mechanical Engineers, United Kingdom, and obtaining her Professional Engineer (Ir.) status in 2016 from the Board of Engineers, Malaysia. Her impressive academic and professional journey is complemented by her extensive publication record, comprising over 100 high-impact papers, with the H-index of 28. Her research interests are diverse, spanning from the synthesis and application of nanoparticles to polymer-based nanocomposites, nanotechnology, failure analysis, electrospinning and materials characterization.

At present, Dr. Ang is channelling her expertise towards developing innovative solutions, notably focusing on creating polymer based nanofibrous membranes embedded with nanoparticles. These novel materials hold promise for varios applications such as in wastewater treatment, chemiresistitve sensors, passive e-DMA collection and bio-medical applications.

Beyond her research pursuits, Dr. Ang plays an active role in academia and professional organization. She has been instrumental in organizing numerous international and national events, including conferences, symposia, seminars and competitions. Her commitment extends to serving as a coach or judge for various national and international events, highlighting her dedication to fostering academic and professional excellence.

Dr. Ang’s contribution extends to leadership roles within professional bodies. She serves as an Exco member in the Materials Technical Division (MaTD) under the Institute of Engineers, Malaysia (IEM) nd holds a position as a Senate member at Universiti Malaya. Additionally, she is an active member of the Intestate of Materials, Malaysia (IMM). 

Her expertise in failure analysis is recognized through her certification as a level 3 failure analysis expert. Dr. Ang's achievement have been acknowledged through awards garnered from numerous international and national exhibitions, underscoring the impact of her research contributions.

Furthermore, Dr. Ang's intellectual property portfolio reflects her innovative mindset, with ownership of one (1) international patent, two (2) Malaysia patents and one (1) micro invention. These patent testify to her ability to translate research finding into tangible solution with real-world applications.

In summary, Prof. Ir. Dr. Ang Bee Chin exemplifies excellence in academia, research and professional service, embodying the spirit of innovation and leadership in the field of Materials Engineering and Materials science. 

 

ACADEMIC QUALIFICATION


  • PhD, (Nanotechnology)
    Universiti Malaya (UM)
  • MSC(UM), (Sains Kejuruteraan)
    Universiti Malaya (UM)
  • BEng(UM), (BAHAN)
    Universiti Malaya (UM)

ADMINISTRATIVE DUTIES


  • Member Senat
    18 Aug 2023 - 16 Dec 2024 (University Malaya)
  • Project Member
    01 Jul 2022 - 31 Mar 2024 (National)
  • National workshop on Thermal Analysis and sample preparation
    21 Jul 2023 - 21 Jul 2023 (National)
  • Secretary
    11 Jun 2018 - 08 Jan 2021 (Department of Mechanical Engineering, Faculty of Engineering)
  • Chairman
    25 May 2020 - 25 Aug 2020 (International)
  • Chairman
    01 Jan 2016 - 31 Dec 2016 (National)
  • Chairman
    10 Oct 2016 - 12 Oct 2016 (National)

MEMBERSHIPS


  • EXCO MEMBER IEM MATD 2022/23, COMMITTEE MEMBER
    2022 to 2023 (National)

AWARD AND STEWARDSHIP


  • Top 2% scientist
    Elsivier, 2024 (International)
  • Malaysia Technology Expo 2024
    Malaysia Technology Expo 2024, 2024 (National)
  • Presidential Award of Excellent
    The institute of Engineers, Malaysia, 2024 (National)
  • Special Awards
    Malaysia Technology Expo-Sustainable Energy & Green Technology International Innocation Awards, 2023 (International)
  • Outstanding Awards
    Malaysia Technology Expo-Sustainable Energy & Green Technology International Innocation Awards, 2023 (International)
  • Gold Awards Winner
    Malaysia Technology Expo-Sustainable Energy & Green Technology International Innocation Awards, 2023 (International)
  • Pertandingan Projek Penyelidikan Inovasi Nanoteknologi (Pin) Peringkat Kebangsaan 2016
    Sagu Hati, 2016 (National)
  • Pingat Emas dan Sagu Hati
    PERTANDINGAN PROJEK PENYELIDIKAN INOVASI NANOTEKNOLOGI (PIN) PERINGKAT KEBANGSAAN 2016, 2016 (National)
  • Gold Medal
    Kejohanan Sukan Staf Universiti Malaysia 2016 (SUKUM 2016), 2016 (National)
  • Recognize Reviewer Status
    ELSEVIER- Materials Science and Engineering B, 2015 (International)
  • Recognized Reviewer Status
    ELSEVIER-Journal of Magnetism and Magnetic Materials, 2014 (International)
  • Excellent in Teaching - KMEB 3104
    Department of Mechanical, 2014 (Department)
  • Excellent in Teaching - KMEB 2102
    Department of Mechanical, 2014 (Department)
  • Excellent in Teaching - KMEB 1173
    Department of Mechanical, 2014 (Department)
  • GOLD MEDAL
    Malaysia Teknology Expo 2013, 2013 (International)
  • IENA-2012 (Gold Medal)
    International Trade Fair- Ideas-Inventions-New Products-Nuremberg, 2012 (International)
  • Sijil Pengajaran Cemerlang
    Faculty of Engineering, University of Malaya, 2011 (University)
  • CERTIFICATE OF EXCELLENT SERVICE
    University of Malaya, 2006 (University)

PUBLICATIONS


Article in Journal
  1. Bee Chin Ang, Hui Yin Nam, Muhamad Faiq Abdullah, Farina Muhamad, Yen Bach Truong. A review on Advances and Challenges in Core-Shell Scaffolds for Bone Tissue Engineering: Design, Fabrication, and Clinical Translation, Macromolecular Rapid communications (Accepted)
  2. Bushra Naureen, Bee Chin Ang, Farina Muhamad, A. S. M. A. Haseeb, W. J. Basirun (2023). Κappa Carrageenan Modifed Polyurethane Foam Scafolds for Skeletal Muscle Tissue Engineering. Journal of Polymers and the Environment.
  3. Low, Y.J., Andriyana, A., Ang, B.C., Zainal Abidin, N.I. (2023). Effect of gauge length on the mechanical responses and crystallization behavior of poly(glycolide-co-caprolactone) (PGCL) suture. Mechanics of Time-Dependent Materials, 2023
  4. Yung Cheng Wong, Yew Hoong Wong , Bee Chin Ang, Aainaa Aqilah Baharuddin,A. S. M. A. Haseeb (2023). Effects of polymerization oxidants on the fabrication of electrospun PPy/WO3 composites. J Mater Sci: Mater Electron 34:33.
  5. Naghavi, MS; Ang, BC; Rahmanian, B; Naghavi, S; Bazri, S; Mahmoodian, R; Metselaar, HSC 2020. On-demand dynamic performance of a thermal battery in tankless domestic solar water heating in the tropical region. APPLIED THERMAL ENGINEERING
  6. Soo, JZ; Chai, LC; Ang, BC; Ong, BH 2020. Enhancing the Antibacterial Performance of Titanium Dioxide Nanofibers by Coating with Silver Nanoparticles. ACS APPLIED NANO MATERIALS
  7. Tan, CJ; Andriyana, A; Ang, BC; Wong, D 2020. Mechanical deformation and fracture mechanisms of polymeric fibres from the perspective of fractography - A review. EUROPEAN POLYMER JOURNAL
  8. Baharuddin, AA; Ang, BC; Haseeb, ASMA; Wong, YC; Wong, YH 2019. Advances in chemiresistive sensors for acetone gas detection. MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING
  9. Habiba, U; Joo, TC; Shezan, SKA; Das, R; Ang, BC; Afifi, AM 2019. Synthesis and characterization of chitosan/TiO2 nanocomposite for the adsorption of Congo red. DESALINATION AND WATER TREATMENT
  10. Habiba, U; Lee, JJL; Joo, TC; Ang, BC; Afifi, AM 2019. Degradation of methyl orange and congo red by using chitosan/polyvinyl Check for alcohol/TiO2 electrospun nanofibrous membrane. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
  11. Soo, JZ; Ang, BC; Ong, BH 2019. Influence of calcination on the morphology and crystallinity of titanium dioxide nanofibers towards enhancing photocatalytic dye degradation. MATERIALS RESEARCH EXPRESS
  12. Soo, JZ; Lee, KM; Ang, BC; Ong, BH 2019. Optimal Electrospun TiO2 Nanofiber Photocatalytic Performance via Synergistic Morphology and Particle Crystallinity with Anatase/Rutile Phase Tuning. PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE
  13. Tan, CJ; Lee, JJL; Ang, BC; Andriyana, A; Chagnon, G; Sukiman, MS 2019. Design of polyurethane fibers: Relation between the spinning technique and the resulting fiber topology. JOURNAL OF APPLIED POLYMER SCIENCE
  14. Wong, D; Andriyana, A; Ang, BC; Lee, JJL; Verron, E; Elm, M 2019. Poissons ratio and volume change accompanying deformation of randomly oriented electrospun nanofibrous membranes. PLASTICS RUBBER AND COMPOSITES.  (Tier 3, Impact Factor = 0.848)
  15. Wong, D; Verron, E; Andriyana, A; Ang, BC 2019. Constitutive modeling of randomly oriented electrospun nanofibrous membranes. CONTINUUM MECHANICS AND THERMODYNAMICS
  16. Wong, YC; Ang, BC; Haseeb, ASMA; Baharuddin, AA; Wong, YH 2019. Review-Conducting Polymers as Chemiresistive Gas Sensing Materials: A Review. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
  17. Baharuddin, AA; Ang, BC; Abu Hussein, NA; Andriyana, A; Wong, YH 2018. Mechanisms of highly stabilized ex-situ oleic acid-modified iron oxide nanoparticles functionalized with 4-pentynoic acid. MATERIALS CHEMISTRY AND PHYSICS
  18. Dabbak, SZA; Illias, HA; Ang, BC; Latiff, NAA; Makmud, MZH 2018. Electrical Properties of Polyethylene/Polypropylene Compounds for High-Voltage Insulation. ENERGIES
  19. Habiba, U; Siddique, TA; Lee, JJL; Joo, TC; Ang, BC; Afifi, AM 2018. Adsorption study of methyl orange by chitosan/polyvinyl alcohol/zeolite electrospun composite nanofibrous membrane. CARBOHYDRATE POLYMERS
  20. Hashemi, SSG; Bin Mahmud, H; Djobo, JNY; Tan, CG; Ang, BC; Ranjbar, N 2018. Microstructural characterization and mechanical properties of bottom ash mortar. JOURNAL OF CLEANER PRODUCTION
  21. Lee, JJL; Andriyana, A; Ang, BC; Huneau, B; Verron, E 2018. Electrospun PMMA polymer blend nanofibrous membrane: electrospinability, surface morphology and mechanical response. MATERIALS RESEARCH EXPRESS
  22. Shariful, MI; Sepehr, T; Mehrali, M; Ang, BC; Amalina, MA 2018. Adsorption capability of heavy metals by chitosan/poly(ethylene oxide)/activated carbon electrospun nanofibrous membrane. JOURNAL OF APPLIED POLYMER SCIENCE
  23. Tam, JH; Ong, ZC; Ismail, Z; Ang, BC; Khoo, SY 2018. Inverse Identification of Composite Material Properties by using a Two-Stage Fourier Method. EXPERIMENTAL MECHANICS
  24. Tan, CJ; Andriyana, A; Ang, BC; Chagnon, G 2018. Inelastic deformation of highly aligned dry-spun thermoplastic polyurethane elastomer microfibres. MATERIALS RESEARCH EXPRESS
  25. Baharuddin, AA; Ang, BC; Wong, YH 2017. Self-assembly and electrical characteristics of 4-pentynoic acid functionalized Fe3O4-gamma-Fe2O3 nanoparticles on SiO2/n-Si. APPLIED SURFACE SCIENCE
  26. Habiba, U; Afifi, AM; Salleh, A; Ang, BC 2017. Chitosan/(polyvinyl alcohol)/zeolite electrospun composite nanofibrous membrane for adsorption of Cr6+, Fe3+ and Ni2+. JOURNAL OF HAZARDOUS MATERIALS
  27. Habiba, U; Joo, TC; Siddique, TA; Salleh, A; Ang, BC; Afifi, AM 2017. Effect of degree of deacetylation of chitosan on adsorption capacity and reusability of chitosan/polyvinyl alcohol/TiO2 nano composite. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
  28. Habiba, U; Siddique, TA; Joo, TC; Salleh, A; Ang, BC; Afifi, AM 2017. Synthesis of chitosan/polyvinyl alcohol/zeolite composite for removal of methyl orange, Congo red and chromium(VI) by flocculation/adsorption. CARBOHYDRATE POLYMERS
  29. Habiba, U; Siddique, TA; Talebian, S; Li Lee, JJ; Salleh, A; Ang, BC; Afifi, AM 2017. Effect of deacetylation on property of electrospun chitosan/PVA nanofibrous membrane and removal of methyl orange, Fe(III) and Cr(VI) ions. CARBOHYDRATE POLYMERS
  30. Iranmanesh, S; Ong, HC; Ang, BC; Sadeghinezhad, E; Esmaeilzadeh, A; Mehrali, M 2017. Thermal performance enhancement of an evacuated tube solar collector using graphene nanoplatelets nanofluid. JOURNAL OF CLEANER PRODUCTION
  31. Lee, JJL; Ang, BC; Andriyana, A; Shariful, MI; Amalina, MA 2017. Fabrication of PMMA/zeolite nanofibrous membrane through electrospinning and its adsorption behavior. JOURNAL OF APPLIED POLYMER SCIENCE
  32. Shariful, MI; Bin Sharif, S; Lee, JJL; Habiba, U; Ang, BC; Amalina, MA 2017. Adsorption of divalent heavy metal ion by mesoporous-high surface area chitosan/poly (ethylene oxide) nanofibrous membrane. CARBOHYDRATE POLYMERS
  33. Tam, JH; Ong, ZC; Ismail, Z; Ang, BC; Khoo, SY 2017. Identification of material properties of composite materials using nondestructive vibrational evaluation approaches: A review. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  34. Ang, B. C., Ahmad, N., Ong, Z. C., Cheok, S. C., Chan, H. F. 2016. Study of the mechanical and the thermal insulation properties of polyurethane coating containing chicken eggshell and rice husk ash as fillers. Pigment Resin Technology
  35. Habiba, U., Afifi, A. M., Ang, B. C., Talebian, S. 2016. Influence of Hydrolysis on Electrospinnability of Chitosan/Polyvinyl Alcohol Blends Solution and Fiber Diameter Distribution Sains Malaysiana
  36. Habiba, U., Islam, M. S., Siddique, T. A., Afifi, A. M., Ang, B. C. 2016. Adsorption and photocatalytic degradation of anionic dyes on Chitosan/PVA/Na-Titanate/TiO2 composites synthesized by solution casting method Carbohydrate Polymers
  37. Islam, M. S., Ang, B. C., Gharehkhani, S., Afifi, A. B. M. 2016. Adsorption capability of activated carbon synthesized from coconut shell. Carbon Letters
  38. Khanlou, H. M., Ang, B. C., Barzani, M. M. 2016. Prediction, modeling and characterization of surface texturing by sulfuric etchant on nontoxic titanium bio-material using artificial neural networks and fuzzy logic systems. Science and Engineering of Composite Materials
  39. Soudeh Iranmanesh, Mohammad Mehrali, Emad Sadeghinezhad, Bee Chin Ang, Hwai Chyuan Ong, Alireza Esmaeilzadeh (2016). Evaluation of viscosity and thermal conductivity of graphene nanoplatelets nanofluids through a combined experimental statisticalapproach using respond surface methodology method. International Communications in Heat and Mass Transfer 79, 74 80.
  40. Wong, D., Andriyana, A., Ang, B. C., Verron, E. 2016. Surface morphology and mechanical response of randomly oriented electrospun nanofibrous membrane. Polymer Testing
  41. Yew, M. K., Bin Mahmud, H., Shafigh, P., Ang, B. C., Yew, M. C. 2016. Effects of polypropylene twisted bundle fibers on the mechanical properties of high-strength oil palm shell lightweight concrete. Materials and Structures
  42. Ghavamian, A., Andriyana, A., Chin, A. B., Ochsner, A. 2015. Numerical investigation on the influence of atomic defects on the tensile and torsional behavior of hetero-junction carbon nanotubes Materials Chemistry and Physics. (Tier 2, Impact Factor = 2.259)
  43. Khanlou, H. M., Ang, B. C., Barzani, M. M., Silakhori, M., Talebian, S. 2015. Prediction and characterization of surface roughness using sandblasting and acid etching process on new non-toxic titanium biomaterial: adaptive-network-based fuzzy inference System Neural Computing Applications. (Tier 2, Impact Factor = 1.569)
  44. Khanlou, H. M., Ang, B. C., Talebian, S., Barzani, M. M., Silakhori, M., Fauzi, H. 2015. Multi- response analysis in the processing of poly (methyl methacrylate) nano-fibres membrane by electrospinning based on response surface methodology: Fibre diameter and bead formation Measurement
  45. Khanlou, H. M., Ang, B. C., Talebian, S., Barzani, M. M., Silakhori, M., Fauzi, H. 2015. A systematic study of maghemite/PMMA nano-fibrous composite via an electrospinning process: Synthesis and characterization Measurement
  46. Yew, M. K., Bin Mahmud, H., Ang, B. C., Yew, M. C. 2015. Effects of Low Volume Fraction of Polyvinyl Alcohol Fibers on the Mechanical Properties of Oil Palm Shell Lightweight Concrete Advances in Materials Science and Engineering
  47. Ang, B. C., Yaacob, II, Chew, C. S. 2014. Effect of FeCl2 Concentration on the Properties of Magnetic Nanoparticles by Using Massarts Procedure. Sains Malaysiana
  48. B.C. ANG*, I.I. YAACOB & C.S. CHEW. 2014. The effect of FECl2 concentration on the properties of magnetic nanoparticles by using Massart s Procedure. Sains Malaysiana, 43(4): 611 616
  49. Hossein Mohammad Khanlou Ali Sadollah Bee Chin Ang Joong Hoon Kim Sepehr Talebian Azadeh Ghadimi 2014. Prediction and optimization of electrospinning parameters for polymethyl methacrylate nanofiber fabrication using response surface methodology and artificial neural networks. Neural Computing and Application
  50. Ming Kun Yew,Hilmi Bin Mahmud,Bee Chin Ang,Ming Chian Yew (2014). Effects of Oil Palm Shell Coarse Aggregate Species on High Strength Lightweight Concrete. Vol 2014, Article ID 387647.
  51. Ming Kun Yewa,Hilmi Bin Mahmuda, Bee Chin Ang, Ming Chian Yew. 2014. Effects of heat treatment on oil palm shell coarse aggregates for high strength lightweight concrete. Journal of Materials and Design 54:702-707
  52. Siti Sofiyah Skh Ali, Serene Teh Seoh Hian, and Bee Chin Ang. 2014. The Effects of Wire Geometry and Wire Layout on Wire Sweep Performance using LQFP Packages in Transfer Mold. Int J Precis Eng Manuf. 15(9): 1793-1799.
  53. Yew, M. K., Bin Mahmud, H., Ang, B. C., Yew, M. C. 2014. Effects of Oil Palm Shell Coarse Aggregate Species on High Strength Lightweight Concrete. Scientific World Journal
  54. (SCI-Q1: Top 10%) - M.C. Yew, N.H. Ramli Sulong, W.T. Chong, S.C. Poh, B.C. Ang, K.H. Tan. 2013. Integration of thermal insulation coating and moving- air-cavity in a cool roof system for attic temperature reduction. Energy Conversion and Management. 75:241-248. http://dx.doi.org/10.1016/j.enconman.2013.06.024
  55. B.C. Ang, I.I. Yaacob and Irwan Nurdin (2013). Investigation of Fe2O3/SiO2 Nanocomposite by FESEM and TEM. Journal of Nanomaterials Vol. 2013, 980390 (Q2).
  56. I Nurdin, I I Yaacob, M R Johan, B C Ang, Characterization and stability monitoring of maghemite nanoparticle suspensions, Adv. Mater. Res. 576 (2012) 398-401
  57. Kim Han Tan, Roslina Ahmad, Bey Fen Leo, Ming Chiang Yew, Bee Chin Ang, Mohd Rafie Johan (2012). Physico-chemical studies of amorphous carbon nanotubes synthesized at low temperature. Materials Research Bulletin,Vol. 47(8), 1849 1854.
  58. Tan, K. H., Ahmad, R., Leo, B. F., Yew, M. C., Ang, B. C., Johan, M. R. 2012. Physico-chemical studies of amorphous carbon nanotubes synthesized at low temperature Materials Research Bulletin. (Tier 1, Impact Factor = 2.105)
  59. Fen, L. B., Han, T. K., Nee, N. M., Ang, B. C., Johan, M. R. 2011. Physico-chemical properties of titania nanotubes synthesized via hydrothermal and annealing treatment Applied Surface Science. (Tier 2, Impact Factor = 1.795)
  60. Leo B.F., Tan K.H., Ng M.N, Ang B.C & Johan M.R. (2011). Physico-chemical properties of titania nanotubes synthesized via hydrothermal and annealing treatment. Applied Surface Science, Vol 258 (1), 431- 435.
  61. Ang B.C., & Yaacob I.I. (2009). Preparation of maghemite-silica nanocomposite using sol-gel technique. Proceeding of International Conference on Manufacturing Science and Engineering.
  62. Ang B.C., & Yaacob I.I. (2008). Synthesis of magnetic nanoparticles by Massart's procedure. The effect of FeCl2 concentration on the properties of magnetic nanoparticles, Book of abstract of the International Conference on Functional Materials and Devices, p.A189.
  63. Ang Bee Chin and Iskandar Idris Yaacob, Synthesis and characterization of magnetic iron oxide nanoparticles via w/o microemulsion and Massart's procedure. Journal of Materials Processing Technology Volume 191, Issues 1-3, 1 August 2007, Pages 235-237 2007.
  64. Ang B.C., & Yaacob I. I. (2005). Synthesis and characterization of iron oxides nanoparticles. Proceedings the 6th International Conference on Fracture and Strength of Solids, Paper 209.
  65. 1.Ang B.C., & Yaacob I. I. (2004), Preparations of magnetic nanoparticles by water in oil microemulsions. Proceedings National Conference on Engineering and Technology, 358-392.
Books
  1. Iskandar Idris Yaacob and Bee Chin Ang (2009). Magnetic Nanoparticles in Water in Oil Microemulsion: Effect of Microemulsion Concentration. VDM Publishing House Ltd. United Kingdom, UK.
Article in Proceeding
  1. ACEH Devolopment International Conference 2012
  2. The International Conference on Agricultural, Food and Biological Engineering (ICAFBE 2012)
  3. Ang Bee Chin and Iskandar Idris Yaacob, Superparamaagnetic Iron Oxide Nanoparticles, Proceedings of 5th National Postgraduate Symposium and Workshop.
  4. Ang Bee Chin and Iskandar Idris Yaacob, Iron Oxides Nanoparticles Prepared by Water In Oil Microemulsion, Proceedings of the International Conference on Recent Advances in Mechanical & Materials Engineering, Paper 278, 2005.
  5. Ang Bee Chin and Iskandar Idris Yaacob, Synthesis and Characterization of Iron Oxides Nanoparticles, Proceedings the 6th International Conference on Fracture and Strength of Solids, Paper 209, 2005

RESEARCH INTEREST


  • maghemite-nanofiber-membrane separator for waste water treatment (Maghemite nanoparticles, electrospinning, nanofiber, waste water treatment)
  • Monodispersity of Maghemite Nanoparticles (maghemite nanoparticles, nanomaterials)
  • Nanomaterials in Energy

RESEARCH PROJECT


National
  1. 2013 - 2014, Geran Penyelidikan Universiti Malaya (UMRG)
    Electrospun Cellulose/maghemite Nanocomposite for Wastewater Treatment ( Principal Investigator(PI))
  2. 2012 - 2014, Exploratory Research Grant Scheme (ERGS)
    Intergration of Moving-air-cavity and Reflector in Green Roof for Thermal Comfort Improvent ( -Researcher)
Private
  1. 2024 - 2026, Curtin Malaysia Higher Degree Research Grant
    Modeling Approach to Investigate the Fundamental Principles of NADESs Behaviour in the Extraction of Carrageenan from Algal Biomass, Curtin University, Malaysia ( Co-Researcher)

CONSULTANCY PROJECT


  • Identification of a Different Type of Unknown Polymeric Fiber, Mighty Shield Industries Sdn Bhd, Project Leader/Lead Consultant
    30 Nov 2023 - 14 Dec 2023 (National)
  • Properties Analysis of Unknown Polymer- Based Structural Fibres, Mighty Shield Industries Sdn. Bhd., Project Director
    01 Oct 2020 - 30 Mar 2021 (National)
  • Improving The Tensile Strength of Pp Structural Fibers, Mighty Shield Industries Sdn. Bhd., Project Director
    28 Mar 2018 - 30 Aug 2018 (National)

PAPER PRESENTED


INVITED SPEAKER
  1. Pulau Ketam Mangrove Ecosystem: Development of Electrospun Passive Sampling Membrane for eDNA-Based Biodiversity Study, Electrospin 2024, AGH University (International) (25 Jun 2024 - 28 Jun 2024)
  2. Fabrication of core-shell PLA/CA electrospun membrane for Tissue Engineering Application, 7th Internatinal Electrospinning Conference , Center of Advanced Materials (International) (22 Nov 2022 - 24 Nov 2022)
  3. Effect of core-to-shell flowrate ratio on morphology, mechanical properties and wettability of poly(lactic acid) fibers prepared via modified coaxial electrospinning, 10th International Conference on Advanced Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University (International) (17 Oct 2021 - 20 Oct 2021)
PRESENTER
  1. EFFECT OF NITRIC ACID CONCENTRATION ON PROPERTIES OF MAGHEMITE NANOPARTICLE SUSPENSIONS, ACEH DEVELOPMENT INTERNATIONAL CONFERENCE 2012 (ADIC2012), International Islamic University Malaysia (International) (26 Mar 2012 - 28 Mar 2012)
  2. Preparation of Maghemite-Silica Nanocomposite using Sol-Gel Technique, International Conference on Manufacturing Science and Engineering 2009 (International) (26 Dec 2009 - 29 Dec 2009)
  3. Synthesis of Magnetic Nanoparticles by Massart's Procedure. The Effect of FeCl2 Concentration on the Porperties of Magnetic Nanoparticles, International Conference on Funstional Materials and Devices 2005 (ICFMD 2005), University Technology of MARA (UiTM) (International) (16 Jun 2008 - 19 Jun 2008)
  4. Iron Oxides Nanoparticles Prepared by Water in Oil Microemulsion, International Conference on Recent Advances in Mechanical & materials Engineering 2005 (ICRAMME 2005), Mechnical Engineering, Faculty of Engineering, University of Malaya (International) (30 May 2005 - 31 May 2005)
  5. Synthesis and Characterization of Iron Oxides Nanoparticles, The 6th International Conference on Fracture and Strength of Solids (FEOFS 2005) (International) (04 Apr 2005 - 06 Apr 2005)
OTHERS
  1. -, Workshop on Reverse Osmosis (RO) Plant, Design, Engineering and Trouble Shooting, Water Treatment Academic (International) (21 Jul 2014 - 25 Jul 2014)

ACADEMIC/PROF. SERVICES


Evaluation
  1. (2024) Review Paper With The Title of : Investigation On Tensile Properties of Kenaf Bast Fibers and Typha Stem Fibers Reinforced Polyester Composites, International, (Reviewer)
  2. (2024) Poster Award Judge, International, (External Examiner)
  3. (2024) Reviewing, International, (Reviewer)
  4. (2024) Appointment as An Evaluator for Engineering Accreditation Council, National, (External Assessor)
  5. (2024) Appointment as An Evaluator for Engineering Accreditation Council (Eac), National, (External Assessor)
  6. (2023) Panel of Universiti Malaya Research Excellence Grant (Umreg) 2023, University, (Internal Examiner)
  7. (2023) Reviewer, International, (Reviewer)
  8. (2023) External Examiner for Ph.D Study, National, (External Examiner)
  9. (2023) External Examiner for Keshav M (Vtu, India), International, (External Examiner)
  10. (2023) Editor, National, (Reviewer)
  11. (2022) Evaluator, University, (Internal Evaluator)
  12. (2022) Candidature Defence for Master Student Named Chewsee Khai (Kga170029, 17058052/1)- Chair Person, University, (Internal Assessor)
  13. (2022) External Evaluator, National, (External Evaluator)
  14. (2022) External Evaluator for a Research Project, International, (External Evaluator)
  15. (2022) Panel for Fast Track Interview, University, (Internal Assessor)
  16. (2022) International Technical Postgraduate 2022, International, (Reviewer)
  17. (2022) International Technical Postgraduate 2022, University, (Reviewer)
  18. (2022) Panel Fot Iirg Cycle 5, University, (Internal Evaluator)
  19. (2022) As a Judge, International, (External Assessor)
  20. (2022) Fabrication of Polyethersulfone/ Polyacrylonitrile Electrospun Nanofiber Membrane for Food Industry Wastewatertreatment, International, (Reviewer)
  21. (2022) Ph.D Viva, University, (Internal Evaluator)
  22. (2022) Assessor for Proposal Defence, University, (Internal Assessor)
  23. (2021) Chair Person for The Examination of Postgraduate Viva, University, (Internal Assessor)
  24. (2021) Iirg Cycle 4, University, (Internal Evaluator)
  25. (2021) Iirg Cycle 4, University, (Internal Evaluator)
  26. (2021) Malaysia Toray Science Foundation, University, (Internal Assessor)
  27. (2021) Assessing Their Master or Ph.D Proposal, University, (Internal Assessor)
  28. (2021) Evaluator for Frgs, University, (Internal Assessor)
  29. (2021) Assessor, University, (Internal Assessor)
  30. (2021) Reviewer, International, (Reviewer)
  31. (2015) Reviewer of Journal of Materials Science and Engineering B, (Reviewer)
  32. (2013) Fullerenes, Nanotubes and Carbon Nanostructures, (Reviewer)
  33. (2012) Reviewer for International Conference on Superconductivity and Magnetism (ICSM2012) , (Reviewer)
Contribution to external organisation
  1. (2024) Imm Education Committee, National, (Resource Person)
  2. (2024) Appointment as Committee Member for 2022 - 2024 Session, National, (Resource Person)
  3. (2024) Wakil Mou Antara Fakulti dan Rgs Corporation Sdn. Bhd., University, (Expert Advisor)
  4. (2024) Liase Person in Between Faculty of Engineering and Rgs Corporation Sdn. Bhd., University, (Resource Person)
  5. (2023) Guest Professor, International, (Adjunct/Visiting Professors)
  6. (2023) Facilitator for Inspiratour Women: International Women Summit 2023, International, (Resource Person)
  7. (2023) Penyelaras Atucara, Protocol dan Buku, National, (Resource Person)
  8. (2023) Executive Committee of The Material Engineering Technical Division, National, (Resource Person)
  9. (2023) Exco, National, (Resource Person)
  10. (2023) Executive Committee of Iem-Matd, National, (Resource Person)
  11. (2022) Imm Have Few Certificate Education Course Which Intend to Be Embedded Into Our UM Degree to Increase The Employability of Our Fresh Graduate. This Intention Has Been Implemented in UTM as a Trial Run., National, (Resource Person)
  12. (2021) Committee Member for Task Force 7- Scholarship, University, (Resource Person)
  13. (2021) Giving Advise On The Development of Nanotechnology in Malaysia, National, (Expert Advisor)
  14. (2019) External Examiner, Segi College, National
  15. (2015) Student Exchange with ECN, Ecole Centrale de Nantes, International
  16. (2015) Join Research/ Join Publications/ Join Supervision of Ph.D students, CHU Grenoble Alpes, International
  17. (2013) Materials Lecturer Competition 2013, Institute of Materials Malaysia
  18. (2013) Secretary-Internation Conference on the Science and Engineering of Materials (ICoSEM 2013), Centre of Advanced Materials
  19. (2013) Final Exam Question Paper Moderation Group, Department of Mechanical, Faculty of Engineering, University of Malaya
  20. (2013) Department Safety Committee, Department of Mechanical, Faculty of Engineering, University of Malaya
  21. (2013) Interweave - Eramus Mundus, Eramus Mundus
  22. (2013) AUN/SEED-Net Coordinator, AUN/SEED-Net
  23. (2012) Co-Supervisor for Undergraduate Student, Universiti Teknologi MARA, National
  24. (2012) Price Evaluation Committee for "Chasis Dynamometer System" -RM200,000, University of Malaya
  25. (2012) Jawatankuasa Penilaian Harga, Jabatan Bendahari, Universiti Malaya
  26. (2012) Seminar on Materials Characterization , Centre of Advanced Materials, Department of Mechanical, Faculty of Engineering, University of Malaya
  27. (2012) Panel of High Impact Research- JOining Technology Symposium 2012, Centre of Advanced Manufacturing and Material Processing, University Malaya
  28. (2012) Guide Book 2012/2013, Faculty of Engineering, University of Malaya
Contribution to event
  1. (2023) Organizing The Half Day Seminar, National, (Event Organiser)
  2. (2023) Chairman, University, (Event Organiser)
  3. (2023) Chaitman of Ph.D Viva, University, (Panelist/Moderator)
  4. (2022) Women in Engineering Talk in Stem, National, (Panelist/Moderator)
  5. (2022) Moderation and Organizer, National, (Panelist/Moderator)
  6. (2022) University Representative, National, (Event Organiser)
  7. (2021) Committee, University, (Event Organiser)
  8. (2021) Chairperson, University, (Event Organiser)
  9. (2021) Department Representative, University, (Event Organiser)

SUPERVISION


Under Graduate Students
  1. (2008) Prevention on Oxidation of NiFe Alloy
Postgraduate Student
PhD/ Doctoral
  1. (2024) Exploring a New Way to Enhance The Efficiency of Proton-Conductive Perovskites, DHAM OBAID H ALSHAMARY
  2. (2023) Development of Tungsten Oxide-Based Composites by Mechanical Mixing for Chemiresistive Gas Sensors, WONG YUNG CHENG
  3. (2023) Mechanical Response of Bioresorbable Poly(Glycolide-Co-Caprolactone) Suture under Monotonic and Non-Monotonic Loadings, LOW YAN JIE
  4. (2023) Zinc Oxide-Based Composite for Acetone Chemiresistive Gas Sensor, AAINAA AQILAH BINTI BAHARUDDIN
  5. (2022) Fabrication of g-C3N4-Based Nanofibers for Enhanced Visible Photoreactivity Towards H2 Evolution Reaction, SULEIMAN MOHAMMED KHALED ABU-SARI
  6. (2022) Electrospun PPY/Nanocellulose/AC Nanofibrous Membrane: Nanocellulose Strengthening And Sustainable Filtration Application, JACKY LEE JIA LI
  7. (2022) Development of Poly(Lactic Acid)-Cellulose Acetate Core-Shell Fibers via Coaxial Electrospinning for Bone Tissue Engineering, MUHAMMAD FAIQ BIN ABDULLAH
  8. (2022) DEVELOPMENT OF EUROPIUM-DOPED CALCIUM SILICATE COATING FOR BONE TISSUE ENGINEERING APPLICATIONS, KEE CHIA CHING
  9. (2020) The development of bio-functionalized polyurethane (PU)-based nanofibrous scaffolds via multiple co-axial electrospinning for tissue engineering application, MUHAMMAD FAIQ BIN ABDULLAH
  10. (2020) SYNTHESIS OF WO3-POLYPYRROLE NANOCOMPOSITES FOR GAS SENSING APPLICATION, WONG YUNG CHENG
  11. (2020) GAS SENSING PROPERTIES OF ZNO-PANI COMPOSITES FOR DETECTION OF BREATH BIOMARKERS, AAINAA AQILAH BINTI BAHARUDDIN
  12. (2020) Electrospun PPY/Nanocellulose/AC Nanofibrous Membrane: Nanocellulose Strengthening And Sustainable Filtration Application, JACKY LEE JIA LI
  13. (2020) Electrospun Nanofiber-Assembled Aerogels, Suleiman Abu-Sari
  14. (2019) PREPARATION AND CHARACTERIZATION OF PARAFFIN/POLYMER COMPOSITES AS FORM-STABLE AND BIODEGRADABLE PHASE CHANGE MATERIALS (PCM) FOR THERMAL ENERGY STORAGE, ALUDIN BIN MOHD SERAH
  15. (2019) Performance evaluation of 3D printed machine tool spindle, MOHAMMED IBRAHIM KITTUR
  16. (2019) INVESTIGATION OF UNDERLYING FAILURE MECHANISMS AND IMPROVING THE MECHANICAL PERFORMANCE OF CNT-BASED POLYMERIC NANO-COMPOSITES, ALI NAEM S ALAMRY
  17. (2015) THERMAL CHARACTERISTIC AND ENTROPY EFFICIENCY OF ALUMINUM OXIDE (AL2O3) - CNT HYBRID NANOFLUID AS SOLAR COLLECTOR APPLICATIONS, SOUDEH IRANMANESH
  18. (2015) NOVEL CARBONACEOUS PHASE CHANGE MATERIAL COMPOSITES FOR ENERGY STORAGE APPLICATION, AMIR REZA AKHIANI
  19. (2015) Fabrication and Characterisation of Highly Aligned Fibrous Assemblies, Tan Chin Joo
  20. (2015) CONTINUUM MODELING AND SIMULATION OF NANOFIBROUS MEMBRANE FOR WATER TREATMENT, TAN CHIN JOO
  21. (2014) Identification of Material Properties of Orthotropic Composite Plate Using Hybrid Non-Destructive Evaluation Approach, Tam Jun Hui
  22. (2014) Constitutive modeling of randomly oriented electrospun nanofibrous membranes., Wong Dannee
  23. (2014) Characterization of mixed polymeric materials for high voltage insulation applications, SAMEH ZIYAD AHMAD DABBAK
  24. (2014) ADVANCED CERAMICS, KEE CHIA CHING
  25. (2012) MECHANICAL PROPERTIES AND DURABILITY OF FIBRE REINFORCED OIL PALM SHELL HIGH STRENGTH LIGHTWEIGHT CONCRETE, YEW MING KUN
Master
  1. (2024) Fabrication of Water–stable Soy Protein Isolate / Carboxymethyl Cellulose Sourced from Oil Palm Empty Fruit Bunch for Bone Tissue Engineering, NURUL ATHIRAH SYAFIQAH BT MOHAMAD ZULKIFLI
  2. (2024) PULAU KETAM MANGROVE ECOSYSTEM: DEVELOPMENT OF ELECTROSPUN PASSIVE SAMPLING MEMBRANE FOR EDNA-BASED BIODIVERSITY ASSESSMENT, LEONG KEEN LIONEL
  3. (2020) Fabrication of Carboxymethyl cellulose (CMC) from Oil Palm Empty Fruit Bunch (OPEFB) / Soy Protein Isolate (SPI) / Calcium Phosphate Hybrid Scaffold via Salt Leaching Technique, Nurul Athirah Syafiqah Bt Mohamad Zulkifli
  4. (2016) Synthesis and Characterization of Graphene Based Metal Oxide Nanofibre For Photocatalytic Water Treatment, JOSHUA SOO ZHEYAN
  5. (2016) SELF-ASSEMBLY OF SYNTHESIZED 4-PENTYNOIC ACID FUNCTIONALIZED MAGNETITE-MAGHEMITE NANOPARTICLES ON SILICON DIOXIDE/N-TYPE SILICON SUBSTRATE, AAINAA AQILAH BINTI BAHARUDDIN
  6. (2015) FABRICATION AND CHARACTERIZATIONS OF POLYMERIC NANOCOMPOSITE FOR WATER FILTRATION, NORASIKIN BINTI AHMAD
  7. (2014) SYNTHESIS AND CHARACTERIZATION OF MAGNETIC IRON OXIDE NANOPARTICLES FOR POWER DEVICE APPLICATION, NURUL ATHIRAH BINTI ABU HUSSEIN
  8. (2014) Surface Morphology and Mechanical Response of Electrospun PMMA Polymer Blend, JACKY LEE JIA LI
  9. (2014) Self-asembly of Synthesized 4-Pentynoic Acid Funstionalized Magnetite-Maghemite Nanoparticles on Silicon Dioxide/N-Type Silicon Subtrate, Aainaa Aqilah Binti Baharuddin
  10. (2014) Electrospun chitosan/poly (ethylene oxide)/activated carbon nanofibrous membrane for heavy metal ion adsorption, MD. SHARIFUL ISLAM
  11. (2013) THE PREPARATION OF CHITOSAN/PVA/ZEOLITE NANOFIBROUS COMPOSITE MEMBRANE FOR HEAVY METAL REMOVAL APPLICATION, UMMA HABIBA
  12. (2012) WIRE SWEEP CHARACTERISTICS OF MULTI-TIER PALLADIUM-COPPER WIRE BONDING ON LOW QUAD FLAT PACKAGE WITH LOW ALPHA GREEN MOLD COMPOUND, SITI SOFIYAH BINTI SKH ALI

TEACHING


Bachelor/First Degree
  1. (2021) KIX1001 - Engineering Mathematics 1
  2. (2020) KIX1002 - Engineering Mathematics 2
  3. (2020) KIL2004 - Laboratory and Communications I
  4. (2020) KIL1003 - Physical and Analytical Chemistry I
  5. (2020) KIL1003 - Physical and Analytical Chemistry I
  6. (2016) KMEB2102 - Materials Characterization
  7. (2016) KXEX1110 - Basic Materials Science
  8. (2015) KMEB2102 - Materials Characterization
  9. (2015) KMEB2110 - Basic Ceramics

PATENT/IPR


  • Method of Producing Plant-Based Coarse Aggregate for Concrete
    Patent (International)
  • Method of Producing Plant-Based Coarse Aggregate for Concrete
    Patent (National)
  • Method of Producing Heat Treated Plant-Based Coarse Aggregate For Concrete
    Patent (National)

SOCIAL RESPONSIBILITY ACTIVITIES


  • Iem Materials Technical Division (Exco), (20 Oct 2021 - 19 Oct 2022) (National)