Curriculum Vitae

PROF. DR. AZIZ BIN HASSAN

Honorary Professor
  • Department of Chemistry
    Faculty of Science
  • ahassan
  • (03)7967 4249

ACADEMIC QUALIFICATION

  • PhD(BRUNEL)(1994), (Processing of composite materials)
    Brunel University, UK
  • MSc(UK)(1989), (Polymer Science and Technology)
    Victoria University of Manchester
  • BSc(Hons)(UKM)(1985), (Nuclear Chemistry)
    Universiti Kebangsaan Malaysia (UKM)

ADMINISTRATIVE DUTIES

  • Chairman, Price Evaluation Committee for Tender of Thermogravimetric Analyser (TGA), Department of Chemistry, Universiti Malaya (≈ RM 250,000.00)
    22 May 2006 - present (University Malaya)
  • Chairman, Specification and Technical Evaluation Committee for Tender of Materials Compounder, Department of Chemistry (≈ RM 0.8 million)
    12 Mar 2007 - present (University Malaya)
  • Chairman, Specification and Technical Evaluation Committee for Tender of Injection Moulding Machine, Department of Chemistry (≈ RM 300,00.00)
    05 Feb 2007 - present (University Malaya)
  • Chairman, Specification and Technical Evaluation Committee for Tender of Differential Scanning Calorimeter (DSC), Department of Chemistry (≈ RM 280,000.00)
    10 Apr 2006 - present (University Malaya)
  • Chairman, Specification and Technical Evaluation Committee for Tender of Dynamic Mechanical Analyser (DMA), Department of Chemistry (≈ RM 350,000.00)
    08 May 2006 - present (University Malaya)
  • Chairman, Specification and Technical Evaluation Committee for Tender of Impact tester, Department of Chemistry, Universiti Malaya (≈ RM 250,000.00)
    15 Mar 2004 - present (University Malaya)
  • Chairman, Specification and Technical Evaluation Committee for Quotation Invitation of Tensile Tester (5 kN), Department of Chemistry (≈ RM 75,000.00)
    16 May 2005 - present (University Malaya)
  • Chairman, Specification and Technical Evaluation Committee for Quotation Invitation of Up-Grading of Instron 50 kN Tensile Tester (Model 4469 to 5569), Department of Chemistry (≈ RM 70,000.00)
    14 Aug 2006 - present (University Malaya)
  • Chairman, Specification and Technical Evaluation Committee for Tender of TGA-MS, Department of Chemistry (≈ RM 0.6 million)
    01 Mar 2011 - present (University Malaya)
  • Chairman, Specification and Technical Evaluation Committee for Quotation of Up-Grading FS3, BBS Laboratory, Department of Chemistry, Universiti Malaya (≈ RM 300,000.00)
    01 Aug 2010 - present (University Malaya)
  • Member, Academic Staff Application/Appointment Evaluation Committee, Department of Chemistry
    04 Jan 2011 - present (University Malaya)
  • Chairman, Price Evaluation Committee for Quotations of Up-Grading of TGA-MS to TGA-GCMS (≈ RM 70,000.00)
    01 Oct 2011 - present (University Malaya)
  • Chairman, Specification and Technical Evaluation Committee for Tender of Fourier Transform Infra-Red (FTIR), Department of Chemistry (≈ RM 250,000.00)
    18 May 2009 - present (University Malaya)
  • Chairman, Price Evaluation Committee for Tender of Nuclear Magnetic Resonance (NMR) 600 MHz, Department of Chemical Engineering, Universiti Malaya (> RM 4 million)
    14 Feb 2011 - present (University Malaya)
  • Head, Polymer and Composite Materials Research Laboratory, Advanced Fundamental Research (AFR) Cluster
    16 Feb 2009 - present (University Malaya)
  • Acting Head, Department of Chemistry
    05 Mar 2007 - present (University Malaya)
  • Acting Head, Department of Chemistry
    09 Dec 2009 - present (University Malaya)
  • Member, Manual Book Committee, Session 2010/2011, Faculty of Science
    01 Jan 2010 - present (Faculty)
  • Member, Exam Questions Vetting Committee, Physical Chemistry Division, Department of Chemistry, Session 2010/2011
    01 Jul 2010 - present (University Malaya)
  • Coordinator for Research Laboratoties: Materials Processing, Mechanical Testing, Thermal Analysis and Materials Characterisation Laboratories
    01 Jan 2004 - present (University Malaya)
  • Coordinator, Materials Science Laboratory
    03 Jan 2000 - present (University Malaya)
  • Member, Specification and Technical Evaluation Committee for Tender of Simultaneous Thermal Analyser (STA) Hyphenated with Fourier Transform Infra-Red (FTIR) Spectrometer, Department of Chemical Engineering, Universiti Malaya
    22 Dec 2011 - present (University Malaya)
  • Member, Specification and Technical Evaluation Committee for Tender of Thermal Analysis Sysem (TGA) Hyphenated With Fourier Transform Infra-Red (FTIR) Spectrometer, Department of Chemical Engineering, Universiti Malaya
    01 Oct 2011 - present (University Malaya)
  • Member, Specification and Technical Evaluation Committee for Tender of Field Emission Scanning Electron Microscope (FESEM), Faculty of Science (≈ RM 2.5 million)
    01 Jun 2011 - present (University Malaya)
  • Chairman, Specification and Technical Evaluation Committee for Tender of Auger Spectrometer, Department of Chemistry (≈ RM 2.9 million)
    03 Apr 2006 - present (University Malaya)
  • Chairman, Specification and Technical Evaluation Committee for Quotation Invitation of Image Analyser, Department of Chemistry, Universiti Malaya (≈ RM 150,00.00)
    01 Feb 2007 - present (University Malaya)
  • Chairman, Specification and Technical Evaluation Committee for Tender of FTIR With Imaging System, Department of Chemistry, Universiti Malaya (≈ RM 0.5 million)
    01 Jul 2008 - present (University Malaya)
  • Chairman, Specification and Technical Evaluation Committee for Tender of Raman Spectrometer With Microscope System, Department of Chemistry Universiti Malaya (≈ RM 300,000.00)
    01 Jul 2008 - present (University Malaya)
  • Head of Department
    01 Sep 2018 - 07 Mar 2019 (Department of Chemistry, Faculty of Science)
  • Head of Department
    01 Sep 2016 - 31 Aug 2018 (Department of Chemistry, Faculty of Science)
  • Head of Department
    22 Jan 2015 - 31 Aug 2016 (Department of Chemistry, Faculty of Science)
  • Member, Conference Committee
    17 Nov 2010 - 17 Nov 2012 (Faculty)
  • Chairman, Exam Questions Vetting Committee, Physical Chemistry Division, Session 2011/2012
    01 Sep 2011 - 31 Aug 2012 (University Malaya)
  • Head, Physical Chemistry Division
    01 Sep 2011 - 31 Aug 2012 (University Malaya)
  • Auditor: Materials Processing, Mechanical Testing and Materials Characterisation Laboratories
    01 Sep 2011 - 31 Aug 2012 (University Malaya)
  • Member, Institutional Biosafety Committee (IBC)
    01 Nov 2010 - 31 Oct 2011 (University Malaya)
  • Coordinator, Development (Infrastructure) Committee, Department of Chemistry, Session 2010/2011
    01 Sep 2010 - 31 Aug 2011 (University Malaya)
  • Head, Physical Chemistry Division
    01 Sep 2006 - 31 Aug 2008 (University Malaya)
  • Member, Organising Committee, Second International Conference on Environmental Chemistry and Geochemistry in the Tropics, GEOTROP-97, 07-11 April 2007, Kuala Lumpur, Malaysia
    01 Jul 2006 - 30 Apr 2007 (International)
  • Acting Head, Department of Chemistry
    18 Dec 2006 - 06 Feb 2007 (University Malaya)
  • Acting Head, Department of Chemistry
    06 Nov 2006 - 08 Nov 2006 (University Malaya)
  • Acting Head, Department of Chemistry
    22 Sep 2006 - 26 Sep 2006 (University Malaya)
  • Member, Organising Committee, National Workshop on Techniques for the Characterisation of Materials, Kuala Lumpur, 03-06 December 1997
    01 Apr 1997 - 31 Dec 1997 (National)
  • Member, Organising Committee, Malaysian Science and Technology Congress, Kuala Lumpur, 22-25 August 1995
    01 Nov 1994 - 30 Sep 1995 (National)

AWARD AND STEWARDSHIP

  • Temuramah oleh pemberita Kosmo untuk penerbitan berita mereka
    suratkhabar Kosmo, 2017 (National)
  • Temuramah oleh pemberita Harian Metro untuk penerbitan berita mereka
    Suratkhabar Harian Metro, 2017 (National)
  • EXCELLENCE SERVICE AWARD
    University of Malaya, 2016 (University)
  • KHIDMAT SETIA 20 AWARD
    University of Malaya, 2015 (University)
  • EXCELLENCE SERVICE AWARD
    University of Malaya, 2011 (University)
  • BioInno Awards 2010, Directly Compressible Pharmaceutical Material For Tabletting
    BioMalaysia Exhibition 2010, Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, 01-03 November 2010, 2010 (National)
  • BioInno Awards 2009, New Pharmaceutical Material in Direct Compression Tablets
    BioMalaysia Exhibition 2009, Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, 17 - 19 November 2009, 2009 (National)
  • CERTIFICATE OF EXCELLENT SERVICE
    University of Malaya, 2008 (University)
  • Research Attachment, National Institute for Materials Sciencs (NIMS), Tsukuba, Japan (18.11.2007 - 28.03.2008)
    Nuclear Safety Research Association (NSRA), Japan, 2007 (International)
  • EXCELLENCE SERVICE AWARD
    University of Malaya, 2005 (University)
  • Synthesis of Phosphor Nano-Materials Using Sol-Gel Micro-Emulsion Technique
    Expo Science and Technology 2003, MOSTI, 07-09 August 2003, Kuala Lumpur, 2003 (National)
  • Research Attachment, Japan Atomic Energy Research Institute (JAERI), Takasaki, Japan (01.12.1999 - 31.08.2000)
    Science and Technology Agency (STA), Japan, 1999 (International)
  • Research Attachment, College of Engineering, Osaka Prefecture University, Osaka, Japan (01.02.1999 - 02.03.1999)
    Japan Society for the Promotion of Science (JSPS), 1999 (International)
  • Research Attachment, Department of Materials Engineering, Brunel University, UK (09.10.1995 - 18.11.1995)
    Asian Development Bank (ADB), 1995 (International)

PUBLICATIONS

Article in Journal
  1. MR Mohd Isa, Aziz Hassan, NA Nordin, MZA Thirmizir and ZA Mohd Ishak (2020), Mechanical, rheological and thermal properties of montmorillonite-modified polyhydroxybutyrate composites, High Performance Polymers, 32(2), 192 200. DOI: 10.1177/0954008319899721
  2. NA Nordin, NMM Abd Rahman and Aziz Hassan (2020), Conditioning effect on the mechanical and thermal properties of heat-treated oil palm empty fruit bunch/high-density polyethylene composite, High Performance Polymers, 32(2), 158 167. DOI: 10.1177/0954008319893418
  3. S Ataei, P Azari, Aziz Hassan, B Pingguan-Murphy, R Yahya & F Muhamad (2020), Essential oils-loaded electrospun biopolymers: A future perspective for active food packaging, Advances in Polymer Technology, 2020, Article ID 9040535
  4. S Ataei, R Yahya, Aziz Hassan, SN Gan, SN Khorasani, J Ramezanpour (2020), Improved properties of coating binder from palm oil-based oleic acid by copolymerizing with acrylate monomers, Journal of Coatings Technology and Research. DOI 10.1007/s11998-020-00321-8
  5. Adebayo, G. O., Hassan, A., Yahya, R., Rahman, N. A., & Lafia-Araga, R. (2019). Influence of wood surface chemistry on the tensile and flexural properties of heat-treated mangrove/high-density polyethylene composites. Polymer Bulletin, 1-20.
  6. Aziz Hassan, Muhammad Rafiq Mohd Isa, Zainal Ariffin Mohd Ishak (2019), Improving thermal and mechanical properties of injection moulded kenaf fibre-reinforced polyhydroxy-butyrate composites through fibre surface treatment, BioResources, 14(2), 3101-3116, DOI: 10.15376/biores.14.2.3101-3116
  7. C Naceur Abouloula, M Rizwan, V Selvanathan, Aziz Hassan, Rosiyah Yahya, A Oueriagli (2019), Oil palm waste based phthaloyl cellulose: a product of photosynthesis as an electrolyte of photovoltaics, Cellulose, 26(3), 1605-1617, DOI: 10.1007/s10570-018-2204-6
  8. Che Ibrahim Abdullah, Ahmad Danial Azzahari, Nor Mas Mira Abd Rahman, Aziz Hassan, Rosiyah Yahya (2019), Optimizing treatment of oil palm-empty fruit bunch (OP-EFB) fiber: chemical, thermal and physical properties of alkalized fibers, Fibers and Polymers, 20(3), 527-537, DOI: 10.1007/s12221-019-8492-0
  9. Dalila Shahdan, Moayad Husein Flaifel, Ruey Shan Chen, Sahrim Ahmad, Aziz Hassan (2019), Role of sonication time on thermal behaviour and dynamic mechanical analysis of NiZn ferrite incorporated PLA/LNR nanocomposite, Bulletin of Materials Science, 42(2), 78, DOI:10.1007/s12034-019-1782-8
  10. GO Adebayo, Aziz Hassan, R Yahya, NM Sarih, KA Bello, L Ekebafe, Impact and thermal analysis of heat-treated and untreated mangrove wood/high-density polyethylene composites, Polymer Bulletin, DOI: 10.1007/s00289-019-02943-4
  11. Ganiyat Olusola Adebayo, Aziz Hassan, Rosiyah Yahya and Norazilawati Muhamad Sarih (2019). Impact of water saturation on the tensile and thermal properties of heat-treated mangrove/high-density polyethylene composites, Journal of Thermoplastic Composite Materials, 1-15
  12. Ganiyat Olusola Adebayo, Aziz Hassan, Rosiyah Yahya, Felix Okieimen and Norazilawati Muhamad Sarih (2019). Dynamic rheological properties of spotted mangrove/high-density polyethylene composites. Journal of Thermoplastic Composite Materials, 1 13.
  13. Nur Afifah Nordin, Nor Mas Mira Abd Rahman, Aziz Hassan (2019), Thermal and mechanical properties of injection moulded heat-treated oil palm empty fruit bunch fibre-reinforced high-density polyethylene composites, Plastics, Rubber and Composites, 48(9), 410-421, DOI: 10.1080/14658011.2019.1641669
  14. Rizwan, M., Yahya, R., Hassan A., Yar, M., Halim, A.A.A., Al-Maleki, A.R., Shahzadi, L., Zubairi, W. (2019) Novel chitosan derivative based composite scaffolds with enhanced angiogenesis; potential candidates for healing chronic non-healing wounds. Journal of Materials Science: Materials in Medicine, 30(72): Pages 11
  15. Ruth A Lafia-Araga, Aziz Hassan, Rosiyah Yahya, Nor Mas Mira Abd Rahman, Fauzani Md Salleh (2019), Water absorption behavior of heat-treated and untreated red balau saw dust/LDPE composites: its kinetics and effects on mechanical properties, Journal of Thermoplastic Composite Materials, 32(10), 1408-1426, DOI: 10.1177/0892705718799823
  16. Syed Noeman Taqui, Rosiyah Yahya, Aziz Hassan, Nayan Nayak, & Akheel Ahmed Syed (2019), A novel sustainable design to develop polypropylene and unsaturated polyester resin polymer composites from waste of major polluting industries and investigation on their physicomechanical and wear properties, Polymer Composites, 40(3), 1142-1157, DOI:10.1002/pc.24819
  17. Syed Noeman Taqui, Rosiyah Yahya, Aziz Hassan, Nayan Nayak, & Akheel Ahmed Syed (2019), Adsorption of Acid Blue 113 from aqueous solution onto nutraceutical industrial coriander seed spent: Isotherm, kinetics, thermodynamics and modeling studies, Desalination and Water Treatment, 153, 321-337, DOI:10.5004/dwt.2019.23913
  18. Taqui, S. N., Yahya, R., Hassan, A., Khanum, F., & Syed, A. A. (2019). Valorization of Nutraceutical Industrial Coriander Seed Spent by the Process of Sustainable Adsorption System of Acid Black 52 from Aqueous Solution. International Journal of Environmental Research, 1-21.
  19. ZASA Salim, Aziz Hassan, H Ismail, NH Che Ismail (2019), Tensile properties and dynamic mechanical behaviour of natural rubber compound filled with rice husk silica produced via solvent-thermal extraction method, Materials Science Forum, 947, 195-199, DOI: 10.4028/www.scientific.net/MSF.947.195
  20. Aziz Hassan, MR Mohd Isa, ZA Mohd Ishak, NA Ishak, Normasmira A Rahman, Fauzani Md Salleh, Characterization of sodium hydroxide-treated kenaf fibres for biodegradable composite application, High Performance Polymers, 30(8), 890-899. DOI: 10.1177/0954008318784997
  21. C. Naceur Abouloula, M. Rizwan, V. Selvanathan, C. I. Abdullah, A. Hassan, R. Yahya, A. Oueriagli (2018) A novel application for oil palm empty fruit bunch: extraction and modification of cellulose for solid polymer electrolyte, Ionics, doi.org/10.1007/s11581-018-2558-7
  22. Fauzani Md Salleh, Aziz Hassan, Rosiyah Yahya, Muhammad Rafiq Mohd Isa, Ruth A Lafia-Araga, Physico-thermal properties of kenaf fiber/high-density polyethylene/maleic anhydride compatibilized composites, High Performance Polymers. Accepted for publication. DOI: 10.1177/0954008318777574
  23. Kim Teck Teo, Aziz Hassan and Seng Neon Gan *(2018), UV-Curable Urethane Acrylate Resin from Palm Fatty Acid Distillate, Polymers 2018, 10, 1374; doi:10.3390/polym10121374
  24. Muhammad Rizwan, Rosiyah Yahya, Aziz Hassan, Muhammad Yar, Ros Anita Omar, Pedram Azari, Gopinath Venkatraman (2018), Synthesis of a novel organosoluble, biocompatible and antibacterial chitosan derivative for biomedical applications, Journal of Applied Polymer Science, 135(9), 45905, DOI: 10.1002/app.45905
  25. Normasmira A Rahman, Aziz Hassan, Javad Heidarian. (2018). Effect of compatibiliser on the properties of polypropylene/glass fibre/nanoclay composites. Polimeros-Ciencia E Tecnologia, 28(2):103-111.
  26. Radin Siti Fazlina Nazrah Hirzin, Ahmad Danial Azzahari, Rosiyah Yahya, Aziz Hassan, Hairani Tahir (2018) The behavior of semi-rigid polyurethane film based on functionalized rubber by one-shot and two-shot method preparation, J Mater Sci, doi 10.1007/s10853-018-2578-8
  27. Radin Siti Fazlina Nazrah Hirzin, Rosiyah Yahya, & Aziz Hassan. (2018). Preparation of one-shot and two-shot method of semi-rigid polyurethane film based on functionalized liquid natural rubber. AIP Conference Proceedings, 1985, 050006 (2018); Doi: 10.1063/1.5047200
  28. Rizwan, M., Yahya, R., Hassan, A., Yar, M., Anita Omar, R., Azari, P., Danial Azzahari, A., Selvanathan, V., Rageh Al-Maleki, A. and Venkatraman, G. (2018). Synthesis of a novel organosoluble, biocompatible, and antibacterial chitosan derivative for biomedical applications. Journal of Applied Polymer Science, 135(9), 45905
  29. ZAS Abdul Salim, Aziz Hassan, H Ismail, A Review on Hybrid Fillers in Rubber Composites, Polymer-Plastics Technology and Engineering, 57(6)(2018)523-539. DOI: 10.1080/03602559.2017.1329432
  30. Zainathul Akhmar Salim Abdul Salim, Aziz Hassan, & Hanafi Ismail (2018), The Effect of High Purity Rice Husk Silica Synthesised using Solvent-thermal Extraction Method on the Properties of Natural Rubber Compounds, BioResources, 13(3), 6936-6951, DOI: 10.15376/biores.13.3
  31. Javad Heidarian, & Aziz Hassan (2017), Improving heat aging and mechanical properties of fluoroelastomer using carbon nanotubes, Polish Journal of Chemical Technology, 19(1), 132-142, DOI: 10.1515/pjct-2016-0050
  32. Muhammad Rizwan, Rosiyah Yahya, Aziz Hassan, Muhammad Yar, Ahmad Danial Azzahari, Vidhya Selvanathan, Cheyma Naceur Abouloula (2017), pH sensitive hydrogels in drug delivery: Brief history, properties, swelling and release mechanism, material selection and applications, Polymers, 9(4), 137, DOI: 10.3390/polym9040137
  33. Muhammad Rizwan, Rosiyah Yahya, Aziz Hassan, Muhammad Yar, Ahmad Danial Azzahari, Vidhya Selvanathan, Faridah Sonsudin and Cheyma Naceur Abouloula (2017). pH Sensitive Hydrogels in Drug Delivery: Brief History, Properties, Swelling, and Release Mechanism, Material Selection and Applications. Polymers, 9(4), 137
  34. Ruhida Ab Rahim, & Aziz Hassan. (2017), The effect of filler on the protein content and interferences in rubber latices, AIP Conference Proceedings 1901, 130021 (2017); DOI: 10.1063/1.5010581
  35. SEA Mohd Asri, Z Zakaria, R Arjmandi, Azman Hassan, MK Mohamad Haafiz, Aziz Hassan, Isolation and characterization of chitin nanowhiskers from fermented tiger prawn waste, Chemical Engineering Transactions, 56(2017)139-144
  36. SN Taqui, R Yahya, Aziz Hassan, N Nayak, S Akheel Ahmed, Development of sustainable dye adsorption system using nutraceutical industrial fennel seed spent-studies using Congo red dye, International Journal of Phytoremediation, 19(7)(2017)686-694
  37. SR Esa, R Yahya, A Hassan, G Omar (2017) Nano-scale copper oxidation on leadframe surface Ionics 23 (2), 319-329
  38. Esa SR, Omar G, Yahya R, Tamaldin N, Hassan A, Abdul Rahim B, Wan Ismai WA (2016), Electron microscopic investigation on nanostructure behaviors of thermal oxidation copper. Key Engineering Materials, Vol. 694, pp. 116-119
  39. Esa SR, Omar G, Yahya R, Tamaldin N, Hassan A, Abdul Rahim B, Wan Ismai WA (2016), Electron microscopic investigation on nanostructure behaviors of thermal oxidation copper. Key Engineering Materials, Vol. 694, pp. 116-119
  40. J Heidarian, Aziz Hassan, Microstructural and thermal properties of fluoroelastomer (FE)/acidic surface modified carbon nanotube (MCNT) nanocomposites, Polymer Composites, 37(12)(2016)3341-3353
  41. Javad Heidarian, Aziz Hassan & R. A. Lafia-Araga, Improving the thermal properties of fluoroelastomer (Viton GF-600S) using carbon nanotube, Composite Interfaces, 23(3)(2016)191-207
  42. Javad Heidarian, Aziz Hassan (2016), Improving heat aging and mechanical properties of fluoroelastomer using carbon nanotubes, Polish Journal of Chemical Technology, 18(3)(2016)0050
  43. Normasmira A. Rahman, Aziz Hassan, Javad Heidarian, Effect of compatibiliser on the properties of polypropylene/glass fibre/nanoclay composites, Polimeros-Ciencia e Tecnologia, Accepted
  44. TT Law, YJ Phua, R Senawi, A Hassan, ZA Mohd Ishak, Experimental analysis and theoretical modelling of the mechanical behavior of short glass fiber and short carbon fiber reinforced polycarbonate hybrid composites, Polymer Composites, 37(4)(2016)1238-1248
  45. H Kargarzadeh, I Ahmad, I Abdullah, R Thomas, A Dufresne, S Thomas, A Hassan, Functionalized liquid natural rubber and liquid epoxidized natural rubber: A promising green toughening agent for polyester, Journal of Applied Polymer Science, 132(3)(2015)41292. DOI: 10.1002/app.41292
  46. J Heidarian, Aziz Hassan, NMM Abd. Rahman (2015), Improving the thermal properties of fluoroelastomer (Viton GF-600S) using acidic surface modified carbon nanotube, Polimeros-Ciencia e Tecnologia, 25(4), 392-401
  47. J Heidarian, Aziz Hassan, Improving thermal properties of fluoroelastomer using carbon nanotubes in presence of air and under nitrogen flow, Asian Journal of Chemistry, 27(4)(2015)1235-1239
  48. Radin S.F.N. Hirzin, A.D. Azzahari, R. Yahya, Aziz Hassan, Optimizing the usability of unwanted latex yield by in situ depolymerization and functionalization, Industrial Crops and Products, 74(15)(2015)773-783
  49. Riyanto Teguh Widodo, Aziz Hassan, Compression and mechanical properties of directly compressible pregelatinized sago starches, Powder Technology, 269(2015)15-21
  50. FM Salleh, Aziz Hassan, R Yahya, AD Azzahari, Effects of extrusion temperature on the rheological, dynamic mechanical and tensile properties of kenaf fiber/HDPE composites, Composites, Part B: Engineering, 58(2014)259-266
  51. Fauzani Md. Salleh, Aziz Hassan, R Yahya, RA Lafia-Araga, AD Azzahari, MNZ Mohd Nazir, Improvement in the mechanical performance and interfacial behavior of kenaf fiber reinforced high density polyethylene composites by the addition of maleic anhydride grafted high density polyethylene, Journal of Polymer Research (Q2), 21(5)(2014)439
  52. J Heidarian, Aziz Hassan, Microstructural and thermal properties of carbon nanotube/fluoroelastomer composites, Composites, Part B: Engineering, 58(2014)166-174
  53. Javad Heidarian, & Aziz Hassan (2014), Microstructural and thermal properties of fluoroelastomer/carbon nanotube composites, Composites Part B: Engineering, 58(166-174, DOI: 10.1016/j.compositesb.2013.10.054
  54. Karim, M. R., Yahya, R., Sheikh, M. R. K., Salleh, N. M., Hassan, A., Mahmud, H. 2014. Synthesis, thermal stability, optical and electrochemical properties of halogen terminated azo-benzothiazole mesogen containing smectic side chain liquid crystalline polymers. Journal of Polymer Research. (Tier 2, Impact Factor = 1.897)
  55. MR Karim, R Yahya, MRK Sheikh, NM Saleh, Aziz Hassan, HNME Mahmud, Synthesis, thermal stability, optical and electrochemical properties of halogen terminated azo-benzothiazole mesogen containing smectic side chain liquid crystalline polymers, Journal of Polymer Research, 21(6)(2014)487
  56. SMM Zawawi, Rosiyah Yahya, Aziz Hassan, & MN Daud (2013), Preparation and characterisation of tungstate scheelite structured nanoparticles, Materials Research Innovations, 15, s100-s197, DOI:10.1179/143307511X13031890748173
  57. Salleh, F. M., Hassan, A., Yahya, R., Azzahari, A. D. 2014. Effects of extrusion temperature on the rheological, dynamic mechanical and tensile properties of kenaf fiber/HDPE composites. Composites Part B-Engineering. (Tier 1, Impact Factor = 2.602)
  58. Salleh, F. M., Hassan, A., Yahya, R., Lafia-Araga, R. A., Azzahari, A. D., Nazir, M. 2014. Improvement in the mechanical performance and interfacial behavior of kenaf fiber reinforced high density polyethylene composites by the addition of maleic anhydride grafted high density polyethylene. Journal of Polymer Research
  59. AD Azzahari, R Yahya, Aziz Hassan, Reactivity ratio determination of newly synthesized copolymers from glycidyl methacrylate and tetrahydrofurfuryl acrylate, Sains Malaysiana, 42(4)(2013)509-514
  60. JM Rovshanndeh, S Bagheri, Aziz Hassan, Synthesis and characterisation of biodegradable multiblock copolymers of L-lactide, -caprolactone and poly(ethylene glycol), Scientia Iranica, Transactions C: Chemistry and Chemical Engineering, 20(6)(2013) 1839-1847
  61. MH Flaifel, SH Ahmad, Aziz Hassan, S Bahri, MA Tarawneh, L Yu, Thermal conductivity and dynamic mechanical analysis of nickel zinc ferrite nanoparticles filled thermoplastic natural rubber nanocomposite, Composites, Part B: Engineering, 52(2013)334-339 (Q1)
  62. MR Karim, MRK Sheikh, NM Salleh, R Yahya, Aziz Hasan, MA Hoque, Synthesis and characterization of azo benzothiazole chromophore based liquid crystal macromers: Effects of substituents on benzothiazole ring and terminal group on mesomorphic, thermal and optical properties, Materials Chemistry and Physics, 140(2013)543-552 (Q1)
  63. MR Karim, MRK Sheikh, RYahya, NM Salleh, AD Azzahari, Aziz Hassan and NM Sarih, Thermal, optical and electrochemical study of side chain liquid crystalline polymers bearing azo-benzothiazole chromophore in the mesogen, Journal of Polymer Research, 20(2013)259 (Q2)
  64. NA Rahman, Aziz Hassan, R Yahya, Processing, microstructural, thermal and mechanical properties of glass fiber/nanoclay/polypropylene composites, Sains Malaysiana, 42(4)(2013)537-546
  65. NA Rahman, Aziz Hassan, R Yahya, RA Lafia-Araga, Impact properties of glass-fiber/polypropylene composites: the influence of fiber loading, specimen geometry and test temperature, Fibers and Polymers,14(11)(2013)1877-1885 (Q2)
  66. NM Salleh, MRK Sheikh, MR Karim, R Yahya, Aziz Hassan, Effect of lateral substituent on the mesomorphic behavior of schiff base ester containing side chain liquid crystalline polymers, Journal of Polymer Research, 20(2013)296 (Q2)
  67. NM Salleh, MRK Sheikh, R Yahya, MR Karim, A Hassan, Naphthalene group containing side chain liquid crystalline polymers and their rheological behavior, Journal of Polymer Research 20(5)(2013)1-9
  68. NM Salleh, MRK Sheikh, R Yahya, MR Karim, Aziz Hassan, Naphthalene group containing side chain liquid crystalline polymers and their rheological behavior, Journal of Polymer Research, 20(2013)131 (Q2)
  69. SMM Zawawi, R Yahya, Aziz Hassan, HNME Mahmud, MN Daud, Structural and optical characterization of metal tungstates (MWO4; M = Ni, Ba, Bi) synthesized by a sucrose-templated method, Chemistry Central Journal, 7(2013)80 (Q1)
  70. AD Azzahari, R Yahya, Aziz Hassan, MRK Sheikh, Synthesis and characterization of new copolymers from glycidyl methacrylate and tetrahydrofurfuryl acrylate: Determination of reactivity ratios, Fibers and Polymers, 13(5)(2012)555-563
  71. Aziz Hassan, NA Rahman, R Yahya, Moisture absorption effect on thermal, dynamic mechanical and mechanical properties of injection-molded short glass-fiber/polyamide 6,6 composites, Fibers and Polymers, 13(7)(2012)899-906
  72. NA Rahman, Aziz Hassan, R Yahya, R.A. Lafia-Araga, PR Hornsby, Polypropylene/glass fiber/nanoclay hybrid composites: morphological, thermal, dynamic mechanical and impact behaviors, Journal of Reinforced Plastics and Composites, 31(2012)1247-1257
  73. NA Rahman, Aziz Hassan, R Yahya, RA Lafia-Araga, PR Hornsby, Micro-structural, thermal and mechanical properties of injection moulded glass-fiber/nanoclay/polypropylene composites, Journal of Reinforced Plastics and Composites, 31(4)(2012)269-281
  74. RA Lafia-Araga, Aziz Hassan, R Yahya, NA Rahman, PR Hornsby, J Heidarian, Thermal and mechanical properties of treated and untreated Red Balau (Shorea Dipterocarpaceae)/LDPE composites, Journal of Reinforced Plastics and Composites, 31(2012)215-224
  75. S Ataei, R Yahya, SN Gan, Aziz Hassan, Study of thermal decomposition kinetics of palm oleic acid- based alkyds and effect of oil length on thermal stability, Journal of Polymers and the Environment, 20(2)(2012)507-513
  76. Aziz Hassan, AA Hassan, MIM Rafiq, Impact properties of injection moulded glass fibre/polyamide 6,6 composites: Effect of testing parameters, Journal of Reinforced Plastics and Composites, 30(10)(2011)889-898
  77. Aziz Hassan, NA Rahman, R Yahya, Extrusion and injection-molding of glass-fiber/MAPP/polypropylene: Effect of coupling agent on DSC, DMA and mechanical properties, Journal of Reinforced Plastics and Composites, 30(14)(2011)1223-1232
  78. Aziz Hassan, NM Salleh, R Yahya, MRK Sheikh, Fibre length, thermal, mechanical and dynamic mechanical properties of injection-moulded glass-fibre/polyamide 6,6: Plasticisation effect, Journal of Reinforced Plastics and Composites, 30(6)(2011)488-498
  79. Aziz Hassan, NM Salleh, R Yahya, MRK Sheikh, Fibre length, thermal, mechanical and dynamic mechanical properties of injection-moulded glass-fibre/polyamide 6,6: Plasticisation effect, Journal of Reinforced Plastics and Composites, 30(6)(2011)488-498
  80. Aziz Hassan, R Yahya, MIM Rafiq, A Hussin, MRK Sheikh, PR Hornsby, Interfacial shear strength and tensile properties of injection-molded, short- and long-glass fiber reinforced polyamide 6,6; Journal of Reinforced Plastics and Composites, 30(14)(2011)1233-1242
  81. MRK Sheikh, AN Farouqui, R Yahya, Aziz Hassan, Effect of acid modification on dyeing properties of rajshahi silk fabric with different dye classes, Fibers and Polymers, 12(5)(2011)642-647
  82. NA Rahman, Aziz Hassan, R Yahya, Plasticisation effect on thermal, dynamic mechanical and tensile properties of injection-moulded glass-fibre/polyamide 6,6, Journal of Science and Technology, 3(1)(2011)47-66
  83. RA Lafia-Araga, Aziz Hassan, R Yahya, Thermal and tensile properties of treated and untreated Red Balau (Shorea Dipterocarpaceae) filled LDPE composites, Journal of Science and Technology, 3(2)(2011)17-28
  84. SMM Zawawi, R Yahya, Aziz Hassan, MN Daud, Preparation and characterisation of tungstate scheelite structured nanoparticles, Materials Research Innovations, 15(2011) 97-100
  85. SY Lee, SN Gan, Aziz Hassan, K Terakawa, T Hattori, N Ichikawa, DH Choong, Reactions between epoxidized natural rubber and palm oil-based alkyds at ambient temperature, Journal of Applied Polymer Science, 120(3)(2011)1503-1509
  86. SY Lee, Aziz Hassan, IKP Tan, K Terakawa, N Ichikawa, SN Gan, Reactions of palm oil-based mcl-PHAs with epoxidized natural rubber, Journal of Applied Polymer Science, 115(4)(2010)2039-2043, DOI: 10.1002/app.31236
  87. Gan SN, Lee SY, Hassan A, Hattori T, Choong DH, Modifications of natural rubber and epoxidised natural rubber compounds by palm oil-based alkyds, Malaysian Rubber Technology Developments, 9(1)(2009)11-14
  88. Siang Yin Lee, Aziz Hassan, Irene K. P. Tan, Katsumi Terakawa, Naoya Ichikawa, Seng Neon Gan*, 2009, Reactions of palm oil-based mcl-PHAs with epoxidized natural rubber,Journal of Applied Polymer Science,Vol 115, Issue 4, start page 2039 (Issue published online 13 Nov 2009)
  89. FLA Latip, A Hassan, R Yahya, Delamination and void analysis on die attach epoxy of a QFN package, Solid State Science and Technology, 16(2)(2008)207-213
  90. S Bagheri, JM Rovshandeh, A Hassan, Synthesis and characterization of random biodegradable copolymers of L-Lactide, Glycolide and Trimethylene carbonate, Iranian Polymer Journal, 16(7)(2007)489-494
  91. SZ Isa, R Yahya, Aziz Hassan, M Tahir, The influence of temperature and reaction time in the degradation of natural rubber latex, The Malaysian Journal of Analytical Sciences, 11(1)(2007)42-47
  92. El-Marsafawi Y, Al-Yami A, Nasr-El-Din HA, Al-Jeffri A, Misran M, Hassan A, Jain B, A new cementing approach to improve and provide long-term zonal isolation, Proceedings of SPE Asia Pacific Oil and Gas Conference and Exhibition 2006: Thriving on Volatility, 1(2006)52-65
  93. Laws M, Riyami A, Soek H, Edwards J, El-Marsafawi Y, Abdenour S, Valstar D, Misran M, Hassan A, Special cement system and cementing techniques improve zonal isolation in South Oman fields, Proceeding of SPE Annual Technical Conference and Exhibition, San Antonio, Texas, 3(2006)1920-1931
  94. R Yahya, A Hassan, Z Aiyub, Structural studies of potassium hexatitanates prepared under hydrothermal and solid state conditions, Functional Materials and Devices, 517(2006)222-226
  95. Aziz Hassan, R Yahya, MTA Rahman, MZ Ibrahim, Gamma rays vulcanization of dried film natural rubber latex: effect of different radiation doses and sensitizers on its tensile property, Jurnal Sains, 12(1&2)(2004)26-31
  96. Hassan A, PR Hornsby, AH Yahaya, R Yahya, ARM Tahir, Tensile, impact and fiber length properties of injection molded, short and long glass fiber composites, Journal of Reinforced Plastics and Composites, 23(9)(2004)969-986; DOI: 10.1177/0731684404033960
  97. R Yahya, Aziz Hassan, MTA Rahman, H Hayashi, Hydrogen production from methanol using potassium hexatitanate promoted ruthenium oxide catalysts, International Journal of Chemical Sciences, 2(4)(2004)519-526
  98. Aziz Hassan, R Yahya, MTA Rahman, AH Yahaya, Extrusion- and pultrusion-compounded carbon fibre reinforced polyamide 6,6 composites: Impact properties of injection moulded specimens, Malaysian Journal of Science, 23(2003)105-110
  99. Hassan A, PR Hornsby, MJ Folkes, Structure-property relationship of injection moulded carbon fibre reinforced polyamide 6,6 composites: The effect of compounding routes, Polymer Testing, 22(2)(2003)185- 189; DOI: 10.1016/S0142-9418(02)00068-5
  100. Aziz Hassan, AH Yahaya, ZA Ibrahim, PR Hornsby, Short- and long-glass fibre reinforced polyamide 6,6 composites: Tensile properties of injection moulded specimens, Malaysian Journal of Science, 20(2001)51-55
  101. Aziz Hassan, R Yahya, PR Hornsby, Short- and long- glass fibre reinforced polyamide 6,6 composites: Fibre length characteristics of injection moulded specimens, Malaysian Journal of Science, 20(2001)57-63
  102. Azoddein AA, Ibrahim S, Hassan A, The effect of impeller design on the mixing of non-newtonian internal tyre lubricant, Journal of Industrial Technology, 10(1)(2001)105-113
  103. Hassan A, AH Yahaya, PR Hornsby, MJ Folkes, The properties of injection molded, short and long carbon fiber reinforced polyamide 6,6 composites, SPE ANTEC, 59(2)(2001)2017-2021
  104. Sakellariou P, Hassan A, Rowe RC, Interactions and partitioning of diluents/plasticizers in hydroxypropyl methylcellulose and poly(vinyl alcohol) homopolymers and blends. Part II: Glycerol, Colloid and Polymer Science, 272(1)(1994)48-56; DOI: 10.1007/BF00653309
  105. Sakellariou P, Hassan A, Rowe RC, Interactions and partitioning of diluents/plasticizers in hydroxypropyl methylcellulose and poly(vinyl alcohol) homopolymers and blends. Part III: Polyethylene glycol 400, Colloid and Polymer Science, 272(2)(1994)220-227; DOI: 10.1007/BF00658851
  106. Sakellariou P, Hassan H, Rowe RC, Plasticization and interactions of polyethylene glycol 6000 with hydroxypropyl methyl cellulose/polyvinyl alcohol blends, International Journal of Pharmaceutics, 102(1- 3)(1994)207-211; DOI: 10.1016/0378-5173(94)90057-4
  107. Sakellariou P, Hassan A, Rowe RC, Interactions and partitioning of diluents/plasticizers in hydroxypropyl methyl cellulose and poly(vinyl alcohol) homopolymers and blends. Part I: Diethylene glycol, Colloid and Polymer Science, 271(11)(1993)1083-1090, DOI: 10.1007/BF00659298
  108. Sakellariou P, Hassan A, Rowe RC, Phase separation and polymer interactions in aqueous poly(vinyl alcohol)/hydroxypropyl methylcellulose blends, Polymer, 34(6)(1993)1240-1248; DOI: 10.1016/0032-3861 (93)90780-E
  109. Sakellariou P, Hassan A, Rowe RC, Plasticization of aqueous poly(vinyl alcohol) and hydroxypropylmethyl cellulose with polyethylene glycols and glycerol, European Polymer Journal, 29(7)(1993)937-943; DOI: 10.1016/0014-3057(93)90289-R
Article in Proceeding
  1. Aziz Hassan, Normasmira A Rahman, Rosiyah Yahya, Extrusion and injection-molding of glass- fiber/MAPP/polypropylene: Effect of coupling agent on DSC, DMA and mechanical properties, Proceeding of The Asian International Conference on Materials, Minerals and Polymer 2012 (MAMIP 2012), Penang, Malaysia, 22-23 March 2012
  2. FM Salleh, A Hassan, R Yahya, Effects of extrusion parameters on the dynamic mechanical properties of kenaf fibre/HDPE composites, Proceeding of The Asian International Conference on Materials, Minerals and Polymer 2012 (MAMIP 2012), Penang, Malaysia, 22-23 March 2012
  3. MRM Isa, A Hassan, Thermal and mechanical properties of injection moulded aramid/carbon hybrid fibres reinforced polypropylene composites, Proceeding of The Asian International Conference on Materials, Minerals and Polymer 2012 (MAMIP 2012), Penang, Malaysia, 22-23 March 2012
  4. Normasmira A Rahman, Aziz Hassan, Rosiyah Yahya, Glass fiber and nanoclay reinforced polypropylene composites: A study of the morphological, thermal and dynamic mechanical behaviors, Proceeding of The Asian International Conference on Materials, Minerals and Polymer 2012 (MAMIP 2012), Penang, Malaysia, 22-23 March 2012
  5. RA Lafia-Araga, Aziz Hassan, R Yahya, Effects of MAPE content on the mechanical properties of Red Balau (Shorea Dipterocarpaceae)/LDPE composites, Proceeding of The Asian International Conference on Materials, Minerals and Polymer 2012 (MAMIP 2012), Penang, Malaysia, 22-23 March 2012
  6. Aziz Hassan, MS Noordini, R Yahya, Conditioning effect on thermal and impact properties of injection moulded glass fibre/polyamide 6,6 composites, Proceeding of The 12th International Conference in QiR (Quality In Research), Bali, Indonesia, 04-07 July 2011
  7. FM Salleh, A Hassan, R Yahya, Rheological properties of extruded kenaf fibre/High density polyethylene composites, Proceeding of Malaysia Polymer International Conference 2011 (MPIC 2011), Putrajaya, 18 20 October 2011
  8. J Heidarian, A Hassan, Improving thermal properties of Viton GF-600S with Advanced Polymer Architecture (APA) using carbon nanotube, Proceeding of Malaysia Polymer International Conference 2011 (MPIC 2011), Putrajaya, 18 20 October 2011
  9. Normasmira A. Rahman, Aziz Hassan, Rosiyah Yahya, Processing, micro-structural, thermal and mechanical properties of glass fiber/nanoclay/polypropylene composites, Proceeding of Malaysia Polymer International Conference 2011 (MPIC 2011), Putrajaya, 18 20 October 2011
  10. RA Lafia-Araga, Aziz Hassan, R Yahya, Water absorption effect on the mechanical properties of heat treated red balau saw dust/LDPE composites, Proceeding of Malaysia Polymer International Conference 2011 (MPIC 2011), Putrajaya, 18 20 October 2011
  11. Aziz Hassan, Nor Mas Mira Abd. Rahman, Rosiyah Yahya, Water Plasticisation Effects on Thermal and Tensile Properties of Glass Fiber/Polyamide 6,6 Composites, Seminar Kebangsaan Aplikasi Sains dan Matematik 2010, Buku Prosiding, Jilid 1, Fizik, Kimia dan Biologi, Muka surat 137-144
  12. Ruth Anayimi Lafia-Araga, Aziz Hassan, Rosiyah Yahya, Thermal and tensile properties of treated and untreated Red Balau (Shorea Dipterocarpaceae)/LDPE composites, Seminar Kebangsaan Aplikasi Sains dan Matematik 2010, Buku Prosiding, Jilid 1, Fizik, Kimia dan Biologi, Muka surat 171-178
  13. Mark Laws, Abdullah Riyami, John Edwards, Youssef Elmarsafawi, Sidhoumi Abdenour, Misni Misran, Aziz Hassan, Special Cement System And Cementing Techniques Improve Zonal Isolation In South Oman Fields (SPE 102414), Proceeding of SPE Annual Technical Conference and Exhibition, San Antonio, Texas, U.S.A., 24 27 September 2006
  14. Y. El-Marsafawi, A. Al-Yami, H.A. Nasr-El-Din, A. Al- Jeffri, M. Misran, A. Hassan, B. Jain, A New Cementing Approach to Improve and Provide Long-Term Zonal Isolation (SPE 100558), Proceeding of SPE Asia Pacific Oil & Gas Conference and Exhibition, Adelaide, Australia, 11 13 September 2006
  15. Hassan A., A.H. Yahaya, R. Yahya, Z.A. Ibrahim, M.Z. Ibrahim, The properties of injection moulded glass fibre reinforced polyamide 6,6 compsoites, Proceedings of RMK7 IRPA Research Seminar, Universiti Malaya, Kuala Lumpur, 24-25 July 2001, Vol. 2, pp. 876-879
Other Publications
  1. Aziz Hassan Asfarina A. Hassan and M.I. Mohd. Rafiq, The effect of specimen geometry and testing conditions on impact proerties of injection moulded glass fibre/polyamide 6 composites, 11th International Conference on Frontiers of Polymers and Advanced Materials, South Africa, 22-27 May 2011 - Extended Abstract
  2. Rosiyah Yahya, Noordini M. Salleh and Aziz Hassan, Fibre length, thermal, mechanical and dynamic mechanical properties of injection-moulded glass-fibre/polyamide 6,6: Effect of moisture absorption, 11th International Conference on Frontiers of Polymers and Advanced Materials, South Africa, 22-27 May 2011 - Extended Abstract
  3. Asfarina A. Hassan, Aziz Hassan, Rosiyah Yahya, Impact and dynamic mechanical properties of injection moulded short glass fibre reinforced polyamide 6 composites subjected to different environmental condition, The 5th Mathematics and Physical Sciences Graduate Congress (5th MPSGC), 07 09 December 2009, University of Chulalongkorn, Thailand - Extended Abstract
  4. NA Rahman, Aziz Hassan, Rosiyah Yahya, Conditioning effect on tensile and flexural properties of injection moulded short glass fibre reinforced polyamide 6, 6 composites, The 5th Mathematics and Physical Sciences Graduate Congress (5th MPSGC), 07 09 December 2009, University of Chulalongkorn, Thailand - Extended Abstract
  5. Aziz Hassan, Rosiyah Yahya, M. Tahir A. Rahman and A. Hamid Yahaya, Extrusion and pultrusion compounded glass fiber reinforced polyamide 6,6 composites : Mechanical- and fiber length-properties of injection molded specimens, 8th International Seminar on Polymer Science and Technology, Tehran, Iran, October 25-27, 2007 - Extended Abstract
  6. Aziz Hassan, Rosiyah Yahya, M.T.A. Rahman and A. Hamid Yahaya, Physical and tensile properties of polyamide 6,6 reinforced with recyclate of glass fibre reinforced thermoset composites, 8th International Seminar on Polymer Science and Technology, Tehran, Iran, October 25-27, 2007 - Extended Abstract
  7. S. Z. Isa, R. Yahya, S. N. Gan, Mohd. Tahir A. R. & A. Hassan, Effect of various reaction times on the degradation of natural rubber latex using sodium nitrite, Seminar Hasil Penyelidikan UM 2006, Universiti Malaya, Malaysia, 06-07 September 2006 - Extended Abstract
  8. S. Z. Isa, R. Yahya, S. N. Gan, Mohd. Tahir A. R., A. Hassan, Temperature variations in the degradation of natural rubber latex, Seminar Kebangsaan Kimia Analisis Malaysia 19 (SKAM-19) & Malaysia Catalysis 2 (MyCat2), Riviera Bay Resort, Melaka, Malaysia, 21-24 August 2006 - Extended Abstract
  9. S. Z. Isa, R. Yahya, S. N. Gan, Mohd. Tahir A. R., A. Hassan, Terminated-hydroxyl group of natural rubber in presence of reducing agent, First Penang International Conference for Young Chemist, USM, Penang, Malaysia, 24-27 May 2006 - Extended Abstract
  10. S. Z. Isa, R. Yahya, S. N. Gan, Mohd. Tahir, A. R. & A. Hassan, Comparison of molecular weight determination of low molecular weight natural rubber products using various techniques, National Symposium of Polymeric Materials 2006, Holiday Villa, Subang Jaya, Selangor, Malaysia, 13-14 December 2006 - Extended Abstract
  11. Hassan A., R. Yahya, A.R. Mohd. Tahir and A.H. Yahaya, Characterisation of Polymer/Polymer/Plasticiser Compatibility Using Dynamic Mechanical Analysis, 8th International Conference on Chemistry and its Role in Development, Sharm El-Sheikh, Egypt, 11 14 April, 2005 - Extended Abstract
  12. Yahya, R., Hassan A., Aiyub, Z, Structural studies of potassium hexatitanates prepared under hydrothermal and solid state conditions, International Conference on Functional Materials and Devices, Kuala Lumpur, Malaysia, Jun 06-08, 2005 - Extended Abstract
  13. Aziz Hassan, Rosiyah Yahya, M. Tahir A. Rahman and A. Hamid Yahaya, Tensile properties and fibre length characteristics of injection moulded glass fibre reinforced polyamide 6,6 composites, National Conference on Engineering and Technology (NACET 2004), University of Malaya, Malaysia, 26-27 May 2004 - Extended Abstract
  14. Hassan A., R. Yahya, A.R.M. Tahir and A.H. Yahaya, The properties of injection molded glass fiber reinforced thermoplastic composites: the effect of compounding techniques, Second International Conference on Chemistry and its Application, Doha, Qatar, December 06 09, 2003 - Extended Abstract
  15. Hassan A., P.R. Hornsby and M.J. Folkes, Fibre degradation of injection moulded short and long glass fibre reinforced thermoplastic composites, 5th Pacific Polymer Conference, 26-30 October 1997, Kyongju, Korea - Extended Abstract
  16. Hassan A., P.R. Hornsby and M.J. Folkes, The advantage of pultrusion over extrusion in the compounding of carbon fibre reinforced polyamide 6,6 composites, High-Tech Seminar on Advances and Trends in Materials Science, 04-08 August 1997, Kuala Lumpur, Malaysia - Extended Abstract
  17. Hassan A., R.C. Rowe, E.F.T. White and A.H. Yahaya, The use of torsional braid analyser in the characterisation of polymer blends compatibility, 5th Pacific Polymer Conference, 26-30 October 1997, Kyongju, Korea - Extended Abstract

RESEARCH INTEREST

  • Processing and properties of natural fibre composites
  • Processing and properties of nanocomposites
  • Processing and properties of man-made fibre composites
  • Theoretical analyses of tensile and impact properties

RESEARCH PROJECT

National
  1. 2011 - 2012, Geran Penyelidikan Universiti Malaya (UMRG)
    Extrusion, injection moulding and characterization of wood fibre thermoplastic composites (UMRG-PI) ( Principal Investigator(PI))
  2. 2011 - 2012, Geran Penyelidikan Universiti Malaya (UMRG)
    Production of directly compressible starches by extrusion (UMRG-CI) ( Consultant)
  3. 2011 - 2012, Postgraduate Research Grant(PPP)
    Extrusion, injection moulding and properties of aramid/oil palm EFB fibre/PP hybrid composites (PPP-PI) ( Principal Investigator(PI))
  4. 2011 - 2012, Postgraduate Research Grant(PPP)
    The effects of additional MAH-g-HDPE coupling agent on injection moulded kenaf fibre/HDPE composites (PPP-PI) ( Principal Investigator(PI))
  5. 2010 - 2011, Postgraduate Research Grant(PPP)
    The effects of additional of MAH-g-HDPE coupling agent on injection moulded kenaf fibre/HDPE composites (PPP-Sup) ( Supervisor)
  6. 2010 - 2011, Geran Penyelidikan Universiti Malaya (UMRG)
    The effect of conditioning on the properties of injection moulded short glass fibre reinforced polyamide 6,6 composites (UMRG-CI) ( Consultant)
  7. 2009 - 2010, Postgraduate Research Grant(PPP)
    Structure-property relationship of injection moulded glass fibre/clay reinforced polyamide 6 nano composites (PPP-Sup) ( Supervisor)
  8. 2009 - 2010, Postgraduate Research Grant(PPP)
    Preparation and properties relationship of injection moulded glass fibre/clay reinforced polyamide 6,6 nano composites (PPP-Sup) ( Supervisor)
  9. 2009 - 2010, Postgraduate Research Grant(PPP)
    Optimisation of the properties of recycled high density polyethylene (r-HDPE) composite using saw dust and maleic anhydride-grafted-polyethylene, MAPE (PPP-Sup) ( Supervisor)
  10. 2008 - 2010, Fundamental Research Grant Scheme (FRGS)
    Preparation and properties characterisation of injection moulded hybrid nano composites of glass fibre / clay reinforced polyamide 6,6 (FRGS-PI) ( Principal Investigator(PI))
  11. 2009 - 2009, Postgraduate Research Grant(PPP)
    MEHANICAL PROPERTIES OF INJECTION MOULDED GLASS/CARBON HYBRID FIBRE REINFORCED POLYAMIDE 6,6 COMPOSITES
  12. 2008 - 2009, Postgraduate Research Grant(PPP)
    Mechanical properties of injection moulded glass/carbon hybrid fibre reinforced polyamide 6,6 composites (PPP-Sup) ( Supervisor)
  13. 2008 - 2009, Postgraduate Research Grant(PPP)
    Structure-property relationship of injection moulded glass fibre/clay reinforced polyamide 6 nano composites (PPP-Sup) ( Supervisor)
  14. 2008 - 2009, Postgraduate Research Grant(PPP)
    Compounding and properties characterisation of short glass fibre reinforced polyamide 6 composites (PPP-Sup) ( Supervisor)
  15. 2008 - 2009, Postgraduate Research Grant(PPP)
    Preparation and properties relationship of injection moulded glass fibre/clay reinforced polyamide 6,6 nano composites (PPP-Sup) ( Supervisor)
  16. 2008 - 2009, Short Term Research Fund (Vote F)(PJP)
    Study of structure property relationship of injection moulded carbon/glass hybrid fibre reinforced polyamide 6,6 composites (PJP-PI) ( Principal Investigator(PI))
  17. 2005 - 2008, MOSTI (IRPA, Top-Down)
    Conductive polymer carrier for wafer level packaging (WLP)(IRPA-PI) ( Principal Investigator(PI))
  18. 2004 - 2007, MOSTI (IRPA)
    Compounding, moulding and characterisation of ground/recycled composite reinforced thermoplastic matrix (IRPA-PI) ( Principal Investigator(PI))
  19. 2002 - 2003, Short Term Research Fund (Vote F)(PJP)
    The effect of radiation dose on mechanical properties of gamma ray irradiated natural rubber latex (PJP-PI) ( Principal Investigator(PI))
  20. 2000 - 2002, MOSTI (IRPA)
    Compounding and mechanical properties characterisation of hybrid fibre polymer composites (IRPA-PI) ( Principal Investigator(PI))
  21. 1997 - 1999, MOSTI (IRPA)
    Chemical modification of natural rubber (IRPA-CI) ( Consultant)
  22. 1996 - 1996, Short Term Research Fund (Vote F)(PJP)
    The properties of recyclate reinforced polymer composites (PJP-PI) ( Principal Investigator(PI))
International
  1. 1998 - 1999, Nippon Sheet Glass Foundation
    Electrochromic thin-film coating on glass for smart window application by sol-gel technique (JPY 1.5 million) (NSG-CI) ( Principal Investigator(PI))
  2. 1997 - 1998, Nippon Sheet Glass Foundation
    Optical materials for transparent heat mirrors (JPY 1.5 million) (NSG-PI) ( Consultant)

CONSULTANCY PROJECT

  • Characterisation and Interpretation of Raman Spectroscopy Analyses of Carbon Nanotubes, Medical Faculty, Universiti Kebangsaan Malaysia (UKM)
    01 Feb 2011 - 01 Feb 2011 (National)
  • Characterisation and Interpretation of Thermal Properties Using Thermogravimetric Analyser (Tga), Universiti Teknologi Malaysia (UTM)
    01 Feb 2011 - 01 Feb 2011 (National)
  • Determination of Molecular Weight Using Gel Permeation Chromatograpgy (Gpc), Universiti Kebangsaan Malaysia (UKM)
    01 Feb 2009 - 01 Feb 2011 (National)
  • Characterisation and Interpretation of Thermal Properties of Biodegradable Polymers Using Differential Scanning Calorimeter (Dsc), Multimedia University of Malaysia (MMU)
    01 Mar 2009 - 01 Mar 2009 (National)
  • Reviewer of Technical Report On Aerosol Fire Suppression Agent - (Pyrogen), BOMBA (Fire Department)
    01 Mar 2006 - 01 Mar 2006 (National)
  • Course On Injection Moulding, NTP World Forum
    01 Mar 2003 - 01 Mar 2003 (National)
  • Course On Materials Science and Engineering, Motorola Semiconductor Sdn. Bhd. (Petaling Jaya, Selangor)
    01 Mar 1999 - 01 Mar 2000 (National)
  • Course On Materials Science and Engineering, Motorola Semiconductor Sdn. Bhd. (Petaling Jaya, Selangor)
    01 Mar 1998 - 01 Mar 1999 (National)
  • Characterisation of Tensile Properties of Hard Disk Materials, Dayaza Teknik (M) Sdn. Bhd.
    01 Mar 1998 - 01 Mar 1998 (National)
  • Course On Materials Science and Engineering, Motorola Semiconductor Sdn. Bhd. (Seremban, Negeri Sembilan)
    01 Mar 1998 - 01 Mar 1998 (National)

PAPER PRESENTED

PLENARY SPEAKER
  1. Aziz Hassan, Rosiyah Yahya, M. Tahir A. Rahman and A. Hamid Yahaya, Physical and tensile properties of polyamide 6,6 reinforced with recyclate of glass fibre reinforced thermoset composites, 8th International Seminar on Polymer Science and Technology, Tehran, Iran (25 Oct 2007 - 27 Oct 2007)
  2. Aziz Hassan, Rosiyah Yahya, M. Tahir A. Rahman and A. Hamid Yahaya, Tensile properties and fibre length characteristics of injection moulded glass fibre reinforced polyamide 6,6 composites, National Conference on Engineering and Technology (NACET), University of Malaya, Malaysia (26 May 2004 - 27 May 2004)
ORAL PRESENTER
  1. Effects of extrusion conditions on the dynamic mechanical properties of kenaf fibre/HDPE composites (FM Salleh, A Hassan, R Yahya), The Asian International Conference on Materials, Minerals and Polymer 2012 (MAMIP 2012) (22 Mar 2012 - 23 Mar 2012)
  2. Effects of MAPE content on the mechanical properties of Red Balau (Shorea Dipterocarpaceae)/LDPE composites (RA Lafia-Araga, Aziz Hassan, R Yahya), The Asian International Conference on Materials, Minerals and Polymer 2012 (MAMIP 2012) (22 Mar 2012 - 23 Mar 2012)
  3. Title NA Rahman, Aziz Hassan, Rosiyah Yahya), The Asian International Conference on Materials, Minerals and Polymer 2012 (MAMIP 2012) (22 Mar 2012 - 23 Mar 2012)
  4. Thermal and mechanical properties of injection moulded aramid/carbon hybrid fibres reinforced polypropylene composites (MRM Isa, A Hassan), The Asian International Conference on Materials, Minerals and Polymer 2012 (MAMIP 2012) (22 Mar 2012 - 23 Mar 2012)
  5. Rheological properties of extruded kenaf fibre/High density polyethylene composites (FM Salleh, A Hassan, R Yahya), Malaysia Polymer International Conference 2011 (MPIC 2011) (18 Oct 2011 - 20 Oct 2011)
  6. Processing, micro-structural, thermal and mechanical properties of glass fiber/nanoclay/polypropylene composites (NA Rahman, Aziz Hassan, R Yahya), Malaysia Polymer International Conference 2011 (MPIC 2011) (18 Oct 2011 - 20 Oct 2011)
  7. Water absorption effect on the mechanical properties of heat treated red balau saw dust/LDPE composites (RA Lafia-Araga, Aziz Hassan, R Yahya), Malaysia Polymer International Conference 2011 (MPIC 2011) (18 Oct 2011 - 20 Oct 2011)
  8. Improving thermal properties of Viton GF-600S with Advanced Polymer Architecture (APA) using carbon nanotube (J Heidarian, A Hassan), Malaysia Polymer International Conference 2011 (MPIC 2011) (18 Oct 2011 - 20 Oct 2011)
  9. Impact and dynamic mechanical properties of injection moulded short glass fibre reinforced polyamide 6 composites subjected to different environmental condition (AA Hassan, Aziz Hassan, R Yahya), The 5th Mathematics and Physical Sciences Graduate Congress (5th MPSGC) (07 Dec 2009 - 09 Dec 2009)
  10. Conditioning effect on tensile and flexural properties of injection moulded short glass fibre reinforced polyamide 6, 6 composites (NA Rahman, Aziz Hassan, Rosiyah Yahya), The 5th Mathematics and Physical Sciences Graduate Congress (5th MPSGC) (07 Dec 2009 - 09 Dec 2009)
  11. F.L.A. Latip, A. Hassan, R. Yahya, Optimization Process Parameter for Die Attach Process, Second National Seminar on Advanced Semiconductor Packaging (NASPAC), Putrajaya (18 Mar 2008 - 19 Mar 2008)
  12. F.L.A. Latip, A. Hassan & R. Yahya, Delamination and Void Analysis Study on Die Attach Epoxy of a QFN Package, Second National Seminar on Advanced Semiconductor Packaging (NASPAC), Putrajaya (18 Mar 2008 - 19 Mar 2008)
  13. F.L.A. Latip, A. Hassan, M.T.A. Rahman, Die Attach Epoxy Delamination Study On QFN Package, National Seminar on Advanced Semiconductor Packaging (NASPAC), Terengganu, National Seminar on Advanced Semiconductor Packaging (NASPAC) (06 Jun 2007 - 08 Jun 2007)
POSTER PRESENTER
  1. Effect of temperature on the impact properties of injection moulded glass fibre reinforced Nylon 6,6 composite (MRM Isa, A Hassan), Malaysia Polymer International Conference 2011 (MPIC 2011) (18 Oct 2011 - 20 Oct 2011)
  2. Plasticization effect on thermal and mechanical properties of injection molded short glass fiber/polyamide 6,6 composites (NA Rahman, Aziz Hassan, Rosiyah Yahya), University of Malaya - University of Hyderabad Bilateral Seminar (03 Oct 2010)
  3. Conditioning effect on tensile and flexural properties of injection moulded short glass fib,re reinforced polyamide 6, 6 composites (NA Rahman, Aziz Hassan, AA Hassan, R Yahya), International Conference on Molecular Chemistry 2008 (ICMC 2008) (25 Nov 2008 - 27 Nov 2008)
  4. Modification of Epoxidized Natural Rubber by Polyhydroxyalkanoates (Lee Siang Yin, Gan Seng Neon, Irene K.P. Tan and Aziz Hassan), Asian Chemical Congress 2007 (ACC 2007) (23 Aug 2007 - 25 Aug 2007)
  5. Modification of Epoxidized Natural Rubber by Polyhydroxyalkanoates (Lee Siang Yin, Gan Seng Neon, Irene K.P. Tan and Aziz Hassan), Asian Chemical Congress 2007 (ACC 2007) (23 Aug 2007 - 25 Aug 2007)
  6. Modification of Epoxidized Natural Rubber by Polyhydroxyalkanoates (Lee Siang Yin, Gan Seng Neon, Irene K.P. Tan and Aziz Hassan), Asian Chemical Congress 2007 (ACC 2007) (22 Aug 2007 - 25 Aug 2007)
PRESENTER
  1. Extrusion and injection-molding of glass-fiber/MAPP/polypropylene: Effect of coupling agent on DSC, DMA and mechanical properties (Aziz Hassan, Normasmira A Rahman, Rosiyah Yahya), The Asian International Conference on Materials, Minerals and Polymer 2012 (MAMIP 2012) (22 Mar 2012 - 23 Mar 2012)
  2. Conditioning effect on thermal and impact properties of injection moulded glass fibre/polyamide 6,6 composites (Aziz Hassan, MS Noordini, R Yahya), The 12th International Conference in QiR (Quality In Research) (04 Jul 2011 - 07 Jul 2011)
  3. Fibre length, thermal, mechanical and dynamic mechanical properties of injection-moulded glass-fibre/polyamide 6,6: Effect of moisture absorption (R Yahya, NM Salleh and Aziz Hassan), 11th International Conference on Frontiers of Polymers and Advanced Materials (22 May 2011 - 27 May 2011)
  4. The effect of specimen geometry and testing conditions on impact proerties of injection moulded glass fibre/polyamide 6 composites (Aziz Hassan, Asfarina A. Hassan and M.I. Mohd. Rafiq), 11th International Conference on Frontiers of Polymers and Advanced Materials (22 May 2011 - 27 May 2011)
  5. Thermal and tensile properties of treated and untreated Red Balau (Shorea Dipterocarpaceae)/LDPE composites (RA Lafia-Araga, Aziz Hassan, Rosiyah Yahya), Seminar Kebangsaan Aplikasi Sains dan Matematik 2010 (Others) (08 Dec 2010 - 10 Dec 2010)
  6. Water Plasticisation Effects on Thermal and Tensile Properties of Glass Fiber/Polyamide 6,6 Composites (Aziz Hassan, Nor Mas Mira Abd. Rahman, Rosiyah Yahya), Seminar Kebangsaan Aplikasi Sains dan Matematik 2010 (08 Dec 2010 - 10 Dec 2010)
  7. Aziz Hassan, Rosiyah Yahya, M. Tahir A. Rahman and A. Hamid Yahaya, Extrusion and pultrusion compounded glass fiber reinforced polyamide 6,6 composites: Mechanical- and fiber length-properties of injection molded specimens, 8th International Seminar on Polymer Science and Technology, Tehran, Iran (25 Oct 2007 - 27 Oct 2007)
  8. Hassan, A., R. Yahya, A.R. Mohd. Tahir and A.H. Yahaya, Characterisation of Polymer/Polymer/Plasticiser Compatibility Using Dynamic Mechanical Analysis, 8th International Conference on Chemistry and its Role in Development, Sharm El-Sheikh, Egypt (11 Apr 2005 - 14 Apr 2005)
  9. Hassan, A., R. Yahya, A.R.M. Tahir and A.H. Yahaya, The properties of injection molded glass fiber reinforced thermoplastic composites: the effect of compounding techniques, Second International Conference on Chemistry and its Application, Doha, Qatar (06 Sep 2003 - 09 Sep 2003)
  10. Hassan, A., A.H. Yahaya, R. Yahya, Z.A. Ibrahim, M.Z. Ibrahim, The properties of injection moulded glass fibre reinforced polyamide 6,6 composites, RMK-7 IRPA Research Seminar, Universiti Malaya, Kuala Lumpur (24 Jul 2001 - 25 Jul 2001)
  11. Hassan, A., P.R. Hornsby and M.J. Folkes, Fibre degradation of injection moulded short and long glass fibre reinforced thermoplastic composites, 5th Pacific Polymer Conference, Kyongju, Korea (26 Oct 1997 - 30 Oct 1997)
  12. Hassan, A., R.C. Rowe, E.F.T. White and A.H. Yahaya, The use of torsional braid analyser in the characterisation of polymer blends compatibility, 5th Pacific Polymer Conference, Kyongju, Korea (International) (26 Oct 1997 - 30 Oct 1997)
  13. Hassan, A., P.R. Hornsby and M.J. Folkes, The advantage of pultrusion over extrusion in the compounding of carbon fibre reinforced polyamide 6,6 composites, High-Tech Seminar on Advances and Trends in Materials Science, Universiti Malaya, Kuala Lumpur, Malaysia (National) (04 Aug 1997 - 08 Aug 1997)
OTHERS
  1. S. Z. Isa, R. Yahya, S. N. Gan, Mohd. Tahir, A. R. & A. Hassan, Comparison of molecular weight determination of low molecular weight natural rubber products using various techniques, National Symposium of Polymeric Materials, Holiday Villa, Subang Jaya, Selangor, Malaysia (13 Dec 2006 - 14 Dec 2006)
  2. Mark Laws, Abdullah Riyami, John Edwards, Youssef Elmarsafawi, Sidhoumi Abdenour, Misni Misran, Aziz Hassan, Special Cement System And Cementing Techniques Improve Zonal Isolation In South Oman Fields (SPE 102414), SPE Annual Technical Conference and Exhibition, San Antonio, Texas, U.S.A. (24 Sep 2006 - 27 Sep 2006)
  3. Y. El-Marsafawi, A. Al-Yami, H.A. Nasr-El-Din, A. Al-Jeffri, M. Misran, A. Hassan, B. Jain, A New Cementing Approach to Improve and Provide Long-Term Zonal Isolation (SPE 100558), SPE Asia Pacific Oil & Gas Conference and Exhibition, Adelaide, Australia (11 Sep 2006 - 13 Sep 2006)
  4. S. Z. Isa, R. Yahya, S. N. Gan, Mohd. Tahir A. R. & A. Hassan, Effect of various reaction times on the degradation of natural rubber latex using sodium nitrite, Seminar Hasil Penyelidikan UM 2006, Universiti Malaya, Malaysia (06 Sep 2006 - 07 Sep 2006)
  5. S. Z. Isa, R. Yahya, S. N. Gan, Mohd. Tahir A. R. & A. Hassan, Temperature variations in the degradation of natural rubber latex, Seminar Kebangsaan Kimia Analisis Malaysia 19 (SKAM-19) & Malaysia Catalysis 2 (MyCat2), Riviera Bay Resort, Melaka, Malaysia (21 Aug 2006 - 24 Aug 2006)
  6. Terminated-hydroxyl group of natural rubber in presence of reducing agent, First Penang International Conference for Young Chemist, , Malaysia, 24-27 May 2006 (Abstract) (24 May 2006 - 27 May 2006)
  7. S. Z. Isa, R. Yahya, S. N. Gan, Mohd. Tahir A. R. & A. Hassan, Terminated-hydroxyl group of natural rubber in presence of reducing agent, First Penang International Conference for Young Chemist, USM, Penang, Malaysia (24 May 2006 - 27 May 2006)
  8. Yahya, R., Hassan, A., & Aiyub, Z, Structural studies of potassium hexatitanates prepared under hydrothermal and solid state conditions, International Conference on Functional Materials and Devices, Kuala Lumpur, Malaysia, Jun 06-08, 2005 (06 Jun 2005 - 08 Jun 2005)

ACADEMIC/PROF. SERVICES

Evaluation
  1. (2011) D.Tech. Thesis (Polymer Engineering), The natural fibre reinforced polyolefins composites for structural applications, MC Khoathane, Faculty of Engineering and the Built Environment, Tshwane University of Technology, Pretoria, South Africa, December 2011, (External Examiner)
  2. (2011) M.Sc. Thesis, Preparation and properties of impact modified biodegradable composites from poly(lactic acid) and kenaf fibers, Zaid Aws Ali Ghaleb, Faculty of Materials and Mineral Resources Engineering, Universiti Sains Malaysia, November 2011, (External Examiner)
  3. (2011) M.Sc. Thesis, Preparation of styrene acrylic copolymers as toner resin by suspension polymerisation, Tang Bee Kim, University of Malaya, September 2011, (Internal Examiner)
  4. (2011) Reviewer for Fibers and Polymers (ISI Publication, 2 manuscripts) , (Reviewer)
  5. (2011) Reviewer for International Journal of the Physical Sciences (1 manuscript), (Reviewer)
  6. (2011) M.Sc. Thesis, Mechanical and physical properties of white filling based on hydroxyapatite bis-glycidyl methacrylate, Saad Omar Alsharif, Faculty of Materials and Mineral Resources Engineering, Universiti Sains Malaysia, July 2011, (External Examiner)
  7. (2011) M.Sc. Thesis, Physical, mechanical and environmental properties of denture base poly(methyl methacrylate) filled with hydroxyapatite, Jamal Moammar Mohamed Aldabib, Faculty of Materials and Mineral Resources Engineering, Universiti Sains Malaysia, May 2011 , (External Examiner)
  8. (2010) M.Sc. to Ph.D. candidacy conversion report, Polymer electrolyte from modified chitosan, Siti Nor Farhana Yusuf, University of Malaya, May 2010, (Internal Examiner)
  9. (2010) M.Sc. Thesis, Palm oil-based polyurethane adhesives, Lee Sook Chin, University of Malaya, May 2010 , (Internal Examiner)
  10. (2010) Reviewer for eXPRESS POLYMER LETTERS (ISI Journal, 4 manuscripts) , (Reviewer)
  11. (2010) M.Sc. Thesis, Natural weathering and hygrothermal aging studies of jute/glass fibres reinforced unsaturated polyester hybrid composites, Tay Hong Kang, Faculty of Materials and Mineral Resources Engineering, Universiti Sains Malaysia, October 2010, (External Examiner)
  12. (2010) Ph.D. Thesis, Synthesis and characterization of biodegradable of polymeric materials from palm oil and jatropha oil, Min Min Aung, Faculty of Engineering, Universiti Kebangsaan Malaysia, July 2010 , (External Examiner)
  13. (2009) Reviewer for Journal of Reinforced Plastics and Composites (ISI Publication, 2 manuscripts) , (Reviewer)
  14. (2009) Reviewer for Iranian Polymer Journal (ISI Publication, 2 manuscripts) , (Reviewer)
  15. (2009) M.Sc. Thesis, Preparation of styrene acrylic copolymer toner resin by solution polymerisation, Neo Su Siang, University of Malaya, November 2009 , (Internal Examiner)
  16. (2009) M.Sc. Thesis, Palm oil-based polyester binder for making fiberboards, Wong Yew Chuan, University of Malaya, October 2009 , (Internal Examiner)
  17. (2009) M.Sc. Thesis, Synthesis of fish oil-based alkyds for surface coating application, Ng Wei Goon, University of Malaya, October 2009 , (Internal Examiner)
  18. (2009) Ph.D. Thesis, Thermal and electrical properties of blends of polyacrylate and poly(ethylene oxide) with and without lithium salts, Sim Lai Har, University of Malaya, October 2009, (Internal Examiner)
  19. (2009) M.Sc. Thesis, Synthesis of fish oil-based alkyds for surface coating application, Azlina Binti Puang, University of Malaya, September 2009 , (Internal Examiner)
  20. (2009) Reviewer for Journal of Applied Polymer Science (ISI Journal, 2 manuscripts) , (Reviewer)
  21. (2007) M.Sc. Thesis, Design and materials for microelectronic package-improvement of interfacial adhesion in plastic package, Shutesh a/l Krishnan, University of Malaya, November 2007 , (Internal Examiner)
  22. (2007) M.Sc. Thesis, Development of carbon fiber reinforced carbon for brake pad application, Sarina Sulaiman, School of Graduate Studies, Universiti Putra Malaysia, June 2007 , (External Examiner)
  23. (1997) Reviewer for Journal Institute of Materials (2 manuscripts) , (Reviewer)
  24. (1996) Reviewer for Nuclear Science Journal (6 manuscripts) , (Reviewer)
Contribution to external organisation
  1. (2011) Research Collaboration , Mysore University (Prof. Syed Akheel Ahmed), International
  2. (2011) Research Collaboration, Universiti Kebangsaan Malaysia (Prof. Sahrim Ahmad), National
  3. (2011) Research Collaboration , Universiti Kebangsaan Malaysia (Assoc. Prof. Ishak Ahmad) , International
  4. (2011) Research Collaboration, Universiti Sains Malaysia (Prof. Zainal Arifin Mohd. Ishak) , National
  5. (2011) Research Collaboration , Universiti Teknologi Malaysia (Prof. Azman Hassan) , National
  6. (2011) FRGS and ERGS Applications (Phase 1/2011) Evaluator for Advanced Fundamental Research (AFR) Cluater, 22 Mac 2011, Universiti Malaya
  7. (2010) Research Collaboration, Queens University, Belfast, UK (Prof. Peter R. Hornsby), International
  8. (2010) Member, Skills Development Advisory Committee (JPPK), Department of Skills Development, Ministry of Human Resources, Sector CM09-00 (Chemical), Sub-Sector 09-08 (Process Control), Ministry of Human Resources
  9. (2009) Research Attachment, Department of Engineering Materials, Sheffield University, UK, International
  10. (2008) Interview for Ph.D. Scholarship, Ministry of Higher Education (MoHE)
  11. (2007) Research Attachment, Nuclear Safety Research Association (NSRA) / National Institute for Materials Sciencs (NIMS), Tsukuba, Japan, International
  12. (2005) Research Collaboration , Faculty of Engineering (Caspian), Tehran University, Iran (Prof. Jamshid Mohammadi-Rovshanndeh), International
  13. (2000) Member, Committee on the Drafting of Malaysian Standard, MS ISO 8124-1:2011, Safety of Toys - Part 1: Safety aspects related to mechanical and physical properties (First Revision) (MS ISO 8124-1:2009, IDT), Malaysian Standard (MS)
  14. (1999) Research Attachment, Japan Society for the Promotion of Science (JSPS) / Vice Vhancellors Council ; College of Engineering, Osaka Prefecture University, Osaka, Japan, International
  15. (1999) Research Attachment, Science and Technology Agency (STA) / Japan Atomic Energy Research Institute (JAERI), Takasaki, Japan, International
  16. (1995) Research Attachment, Asian Development Bank / Department of Materials Engineering, Brunel University, UK, International

SUPERVISION

Under Graduate Students
  1. (2010) SCES 3191 (Industrial Training)
  2. (2009) SCES 3191 (Industrial Training)
  3. (2008) Teaching training
  4. (2008) SCES 3191 (Industrial Training)
  5. (2007) SCES 3191 (Industrial Training)
  6. (2007) SCES 3181 (Project)
  7. (2006) Teaching training
  8. (2006) SCES 3191 (Industrial Training)
  9. (2006) SCES 3181 (Project)
  10. (2005) SCES 3191 (Industrial Training)
  11. (2005) SCES 3181 (Project)
  12. (2004) SCES 3191 (Industrial Training)
  13. (2004) SCES 3181 (Project)
Postgraduate Student
PhD/ Doctoral
  1. (2015) COMPOUNDING, INJECTION MOULDING AND CHARACTERISATION OF PLASMA TREATED MANGROVE PARTICLE / POLYPROPYLENE COMPOSITES, ADEBAYO GANIYAT OLUSOLA
  2. (2015) Biopolymer Based Stimuli Responsive Blends Hydrogels: Synthesis, Characterization and Applications In Biomedicine, MUHAMMAD RIZWAN
  3. (2014) PROCESSING AND CHARACTERIZATION OF GRAPHENE/NANOCLAY/ KENAF FIBRE REINFORCED POLYHYDROXYBUTYRATE HYBRID COMPOSITES, MUHAMMAD RAFIQ BIN MOHD ISA
  4. (2014) PREPARATION AND CHARACTERISATION OF OIL PALM-EMPTY FRUIT BUNCH (OP-EFB)/POLYPROPYLENE COMPOSITES, CHE IBRAHIM BIN ABDULLAH
  5. (2014) DISPERSION STUDIES ON NANO MINERAL FILLERS AS RUBBER REINFORCEMENT, ZAINATHUL AKHMAR SALIM BT. ABDUL SALIM
  6. (2013) SYNTHESIS OF UV CURABLE RESINS FROM PALM FATTY ACID DISTILLATE, TEO KIM TECK
  7. (2013) EFFECT OF ANTIOXIDANTS AND FIRE RETARDANTS AS MINERAL FILLERS ON THE PHYSICAL AND MECHANICAL PROPERTIES OF HIGH LOADING HYBRID BIOCOMPOSITES, MOHD RASHID YUSOF HAMID
  8. (2013) DEVELOPMENT AND CHARACTERIZATION OF LOW-COST GREEN THERMOPLASTIC COMPOSITES FROM NUTRACEUTICAL INDUSTRIAL SPENT AND THEIR EVALUATION FOR NEWER APPLICATIONS, SYED NOEMAN TAQUI
  9. (2012) The Effect of Fillers on the Surface Morphology and Protein Content in Rubber Latices, RUHIDA BINTI AB RAHIM
  10. (2012) The effect of fillers on the surface morphology and protein content in rubber, Ruhida Binti Ab. Rahim (LGM)
  11. (2011) Thermoplastic polyurethane based on telechelic natural rubber derivatives, Radin Siti Fazlina Nazrah Binti Hirzin (Lecturer, UiTM)
  12. (2011) THERMOPLASTIC POLYURETHANE BASED ON TELECHELIC NATURAL RUBBER DERIVATIVES, RADIN SITI FAZLINA NAZRAH BINTI HIRZIN
  13. (2010) EXTRUSION, INJECTION MOULDING PROPERTIES OF ARAMID / OIL PALM EFB FIBERS / POLYPROPYLENE HYBRID COMPOSITES, SURIANA BINTI ROFIE @ RAFIE
  14. (2010) Extrusion, injection moulding and properties of aramid/oil palm EFB fibers/polypropylene hybrid composites, Suriana Binti Rofie @ Rafie (Lecturer, UiTM)
  15. (2009) The effects of additional of MA-g-HDPE coupling agent on injection moulded kenaf fibre/HDPE composites, Fauzani Binti Md. Salleh (SLAI UM)
  16. (2009) PROCESSING AND CHARACTERIZATION OF KENAF FIBER/HIGH DENSITY POLYETHYLENE COMPOSITES, FAUZANI BINTI MD. SALLEH
  17. (2009) Processing and characterisation of wood flour/ HDPE / MAPE composites, Ruth Anayimi Lafia-Araga (Lecturer, Nigeria)
  18. (2009) PREPARATION AND CHARACTERISATION OF HEAT TREATED AND UNTREATED RED BALAU/LDPE COMPOSITES, LAFIA-ARAGA RUTH ANAYIMI
  19. (2009) PREPARATION AND CHARACTERISATION OF GLASS FIBRE/NANOCLAY/POLYPROPYLENE NANOCOMPOSITES, NOR MAS MIRA BINTI ABD RAHMAN
  20. (2009) Preparation and characterisation of glass fibre/nanoclay/polypropylene composites, Nor Mas Mira Binti Abdul Rahman (SLAB UM)
  21. (2008) SYNTHESIS AND CHARACTERISATION OF METAL OXIDE NANOPARTICLES FOR APPLICATION IN SENSOR, SITI MURNI BINTI M ZAWAWI
  22. (2008) Optimisation of crystallite size of calcium tungstate nanopowders synthesised via sugar template, Siti Murni Binti Mohd. Zawawi (Fellowship UM)
  23. (2007) Modification of natural rubber pressure sensitive adhesive by palm kernel oil alkyd, Lee Siang Yin
  24. (2005) REACTIONS OF EPOXIDIZED NATURAL RUBBER WITH PALM OIL-BASED ALKYDS AND MEDIUM-CHAIN-LENGTH POLYHYDROXYALKANOATES, LEE SIANG YIN
  25. (2005) Physical and electrical properties of silicone rubber, Ngah Ramzi Bin Hamzah
  26. (2004) SYNTHESIS AND CHARACTERISATION OF MULTIBLOCK AND RANDOM COPOLYMERS BY FUNCTIONAL BIODEGRADABLE POLYESTERS, SHIRZAD BAGHERI
  27. (2004) Synthesis and characterisation of biodegradable polymers, Shirzad Bagheri (PhD, Iran)
  28. (2004) ENHANCING SET CEMENT EXPANSION AND MECHANICAL PROPERTIES FOR OIL AND GAS WELLS APPLICATION, YOUSSEF AHMED ELMARSAFAWY
  29. (2003) Enhancing cement expansion and mechanical properties for oil and gas wells, Youssef Ahmed El-Marsafawy (Egypt)
  30. (2002) CHARACTERIZATION AND EVALUATION OF PREGELATINISED SAGO STARCH AS DIRECT COMPRESSION MATERIALS, RIYANTO TEGUH WIDODO
  31. (2002) Characterisation and evaluation of pre-gelatinised sago starch as direct compression materials, Riyanto Teguh Widodo (Lecturer UM)
  32. (2001) Palm oil emulsion formation and its application to natural rubber latex dipped-processing, Kausar Binti Ahmad
Master
  1. (2015) PREPARATION AND CHARACTERIZATION OF HEAT-TREATED KENAF FIBER/POLY(HYDROXY BUTYRATE) (PHB) COMPOSITE, NUR AQILAH ISHAK
  2. (2015) PREPARATION AND CHARACTERISATION OF HEAT-TREATED OIL PALM-EMPTY FRUIT BUNCH (OP-EFB)/HIGH DENSITY POLYETHYLENE COMPOSITES, NUR AFIFAH BINTI NORDIN
  3. (2012) PROCESSING AND PROPERTIES CHARACTERISATION OF MAPP/ARAMID/CARBON/POLYPROPYLENE HYBRID COMPOSITES, NABILA FARHANA AZRIN SHAH
  4. (2012) PROCESSING AND CHARACTERISATION OF MAPP/ARAMID/CARBON/POLYPROPYLENE HYBRID COMPOSITES, Nabila Farhana Azrin Shah (MSc)
  5. (2010) Study on the kinetic growth of copper oxidation in semiconductor packaging, Siti Rahmah Binti Esa (Engineer, Infenion / Fellowship UM)
  6. (2010) STUDY ON THE KINETIC GROWTH OF COPPER OXIDATION IN SEMICONDUCTOR PACKAGING, SITI RAHMAH BINTI ESA
  7. (2010) Processing And Characterisation Of Aramid/Carbon Hybrid Fibres Reinforced Polypropylene Composites, Muhammad Rafiq Bin Mohd. Isa (RA, UM)
  8. (2010) Processing and characterisation of aramid/carbon hybrid fibres reinforced polypropylene composites, MUHAMMAD RAFIQ BIN MOHD ISA
  9. (2008) THE EFFECT OF TESTING & ENVIRONMENTAL CONDITIONS ON THE PROPERTIES OF INJECTION MOULDED GLASS FIBRE REINFORCED POLYAMIDE 6 COMPOSITES, ASFARINA BINTI AMIR HASSAN
  10. (2008) The effect of testing and environmental conditions on the properties of injection moulded glass fibre reinforced polyamide 6 composites, Asfarina Binti Amir Hassan
  11. (2008) The effect of moisture plasticisation on mechanical and thermal properties of injection moulded glass fibre reinforced polyamide 6 composites, Khalil Khamis Abdullah Albulushi (Ministry of Education, Oman)
  12. (2008) Microstructural and properties characterisation of glass and glass/carbon hybrid fibre reinforced poyamide 6,6 composites, Noordini Binti Mohd. Salleh
  13. (2007) THE EFFECT OF MOISTURE PLASTICIZATION ON MECHANICAL AND THERMAL PROPERTIES OF INJECTION MOULDED GLASS FIBER REINFORCED POLYAMIDE 6 COMPOSITES, KHALIL KHAMIS ABDULLAH ALBULUSHI
  14. (2007) INJECTION MOULDING AND PROPERTIES OF GLASS AND GLASS CHARACTERISATION HYBRID FIBRE REINFORCED POLYAMIDE 6, 6 COMPOSITES, NOORDINI BINTI MOHAMAD SALLEH
  15. (1998) Analysis of foreign matter materials related to the die attach process of semiconductor device packaging, Tengku Elisa Bustaman Binti Tg. Mohd. Ali
  16. (1996) Development of non-post mold cure alternative for semiconductor packaging, Tan Sook Wai

TEACHING

Bachelor
  1. (2012) SCES2434 - Polymer Chemistry I
  2. (2012) SCES3334 - Polymer Chemistry 2
  3. (2012) SCES3354 - Composite Material
  4. (2011) SCES2434 - Polymer Chemistry I
  5. (2011) SCES2434 - Polymer Chemistry I
  6. (2011) SCES3354 - Composite Materials
  7. (2011) SCES3354 - Composite Materials
  8. (2010) SCES3334 - Polymer Chemistry 2
  9. (2010) SCES3334 - Polymer Chemistry 2
  10. (2010) SCES3354 - Composite Materials
  11. (2009) SCES3334 - Polymer Chemistry 2
  12. (2009) SCES3334 - Polymer Chemistry 2 (Q)
  13. (2009) SCES3334 - Polymer Chemistry 2 (T)
  14. (2008) SCES2434 - Polymer Chemistry I
  15. (2008) SCES3334 - Polymer Chemistry 2
  16. (2007) SCEP2314 - General Polymer Chemistry
  17. (2007) SCEP3152 - Basic Chemistry 3
  18. (2007) SCEP3154 - Industrial Polymer Chemistry
  19. (2007) SCES2434 - Polymer Chemistry I (Group a)
  20. (2007) SCES2434 - Polymer Chemistry I (Group D)
  21. (2007) SCES3334 - Polymer Chemistry 2

PATENT/IPR

  • Package Architecture for Quad Flat No-leads Stacked Die (MY149810-A), ABDULLAH S, JALAR A, AHMAD I, RASID R, TALIB M Z M, HASSAN A, BASIRUN W J, ISNIN A, HASHIM M A
    Patent (International)

SOCIAL RESPONSIBILITY ACTIVITIES

  • Member, Parents and Teachers Association, Sekolah Menengah Kebangsaan Seksyen 19, Shah Alam, Selangor, (02 Jan 2013 - 31 Dec 2013)
  • Committee Member, Cycling Club, Seksyen 20, Shah Alam, Selangor, (01 Jan 2013 - 31 Dec 2014)
  • Member, Skills Development Advisory Committee (Jppk), Department of Skills Development, Ministry of Human Resources, Sector Cm09-00 (Chemical), Sub-Sector 09-08 (Process Control), 26/01/2010 - 25/01/2012, (26 Jan 2010 - 25 Jan 2012)
  • Committee Member, Section 20 Area Neighbourhood (Kawasan Rukun Tetangga (Krt) Seksyen 20), Shah Alam, Selangor, (01 Aug 2006 - 30 Sep 2010)
  • Examiner for Chemistry Paper, Matriculation Examination, Ministry of Education for Eight Semesters, (01 Dec 2003 - 31 Dec 2008)
  • Member, Parents and Teachers Association, Sekolah Kebangsaan Seksyen 20, Shah Alam, Selangor, (01 Jan 2003 - 31 Dec 2012)
  • Member, Committee On The Drafting of Malaysian Standard, Ms Iso 8124-1:2011, Safety of Toys Part 1: Safety Aspects Related to Mechanical and Physical Properties (First Revision) (Ms Iso 8124-1:2009, Idt), (01 Jan 2000 - 31 Dec 2012)