Click to Print This Page

 

CURRICULUM VITAE
PERSONAL DETAIL

Name
  Dr. Mohd Faizul Bin Mohd Sabri
Designation
  Senior Lecturer
Department
  Department of Mechanical Engineering
Faculty
  Faculty of Engineering
Tel. No. (Office)
  79677637
Fax No.
  79675317
E-mail Address
  faizul@um.edu.my
ResearcherID Link
  http://www.researcherid.com/rid/B-9084-2010
Address(Office)
  Department of Mechanical Engineering, Faculty of Engineering Building, University of Malaya, 50603 Kuala Lumpur, MALAYSIA

ACADEMIC QUALIFICATION
(Qualification), (Institution).
D.ENG, TOHOKU UNIVERSITY, JAPAN
M.Eng, KITAMI INSTITUTE OF TECHNOLOGY, JAPAN
B.Eng, KITAMI INSTITUTE OF TECHNOLOGY, JAPAN

PROFESSIONAL AFFILIATION/MEMBERSHIP
(Organisation), (Role), (Year), (Level).

Board of Engineers, Malaysia, Graduate Member, 2005, (National)

The Institution of Engineer, Malaysia, Graduate Member, 2005, (National)

Standard Institute and Research Institute of Malaysia (SIRIM)., Member, Technical Committee on Furniture, 2004-2006, (National)

ADMINISTRATIVE DUTIES
(Role), (Level), (Start date),(End Date).


Jawatankuasa Induk FESENI 2012/2013, University Malaya

Jawatankuasa Induk FESENI 2011/2012, University Malaya

Jawatankuasa Induk pemilihan MPPUM 2012/2013, University Malaya

Jawatankuasa Induk pemilihan MPPUM 2011/2012, University Malaya

Jawatankuasa Induk SUKMUM 2011/2012, University Malaya

Secretary, The Seventh Triennial AEESEAP Conference (2003)

Jawatankuasa Induk SUKMUM 2012/2013, University Malaya

Interviewer, University Malaya, 28-Mar-13 - 27-Mar-14

Acting Deputy Dean, Faculty Of Engineering Dean's Office, Faculty Of Engineering, 05-Nov-12 - 12-Nov-12

Principal, Fourth Residental College, University of Malaya, University Malaya, 01-Aug-12 - 08-Sep-13

Jawatankuasa Pengajian Mahasiswa, Department Of Mechanical Engineering, Faculty Of Engineering, 01-Sep-11

Principal, Fourth Residential College, University of Malaya, University Malaya, 01-Aug-10 - 31-Jul-12

JIT Chairman, Department Of Mechanical Engineering, Faculty Of Engineering, 14-May-10

Acting Head Of Department, Department Of Mechanical Engineering, Faculty Of Engineering, 19-Apr-10 - 20-Apr-10

Acting Head of Department, Department Of Mechanical Engineering, Faculty Of Engineering, 28-Jul-06 - 04-Aug-06

Secretary (College Tunku Bahiyah), University Malaya, 01-Feb-03 - 31-Aug-06

Fellow of College Tunku Bahiyah, University Malaya, 01-Feb-03 - 31-Aug-06

CAREER HISTORY
(Post), (Organisation), (Period).


Senior Lecturer, Univeristy of Malaya, 13/02/2010

Lecturer, University of Malaya, 08/05/2002 until 12/02/2009

Process Engineer, SGTi Globetronics Sdn. Bhd., 10/04/2001 until 30/06/2001

AREAS OF EXPERTISE
(Area).

Waste-Heat Recovery (Thermoelectric)

Precision Engineering

RECENT SELECTED PUBLICATIONS
(Publication).
 
Book
 
2007

Abdul Rahim Abdul Manaf, Mustafar Ab Kadir, Mohd Faizul Mohd Sabri. 2007. Reka Bentuk Elemen dan Sistem Mekanik, (ISBN: 978-983-100-425-8), Kuala Lumpur: University of Malaya Press. 
 
Chapter In Book
 
2010

Toshiro Higuchi, Koichi Suzumori and Satoshi Tadokoro. 2010. Next-Generation Actuators Leading Breakthroughs. DLm. Takahito Ono, Mohd Faizul Mohd Sabri and Masayoshi Esashi. PZT Driven Micro XY Stage. Hlm. 55-66. Springer London 
 
Article In Academic Journals
 
2014

Amin NAAM, Shnawah DA ,Sabri MFM and Said SM. Electrical Resistivity of Fe-bearing Sn1Ag0.5Cu Lead- Free Solder Alloys. Advanced Material Research (ISI-Cited Publication)

Sabri MFM, Shnawah DA, Badruddin IA, Said SBM. Effects of Aging on Sn-1Ag-0.5Cu Solder Alloys Containing 0.1 wt.% and 0.5 wt% Al. J. Alloy Compd. (2014) Jan;582: 437-446 (ISI-Cited Publication)

MH Sajid, Z Said, R Saidur, FRM Adikan, MFM Sabri, NA Rahim, A time variant investigation on optical properties of water based Al2O3 nanofluid , International Communications in Heat and Mass Transfer , http://dx.doi.org/10.1016/j.icheatmasstransfer.2013.10. 006. (2013) [Q1] (ISI-Cited Publication)

Elsheikh MH, Shnawah DA, Sabri MFM, SMSaid, Hassan M, Bashir MBA, Mohamad M. A review on thermoelectric renewable energy: principle parameters that affect their performance. J. Renew Sust Energ Rev (2014) Feb;30: 337- 355 (ISI-Cited Publication)

IM Shahrul, IM Mahbubul, R Saidur, MFM Sabri, A Muhammad Afifi, SS Khaleduzzaman, Global Effects of MWCNT-W Nanofluid in a Shell & Tube Heat Exchanger , Advanced Materials Research 832, 154-159. (2014) [ISI/Scopus] (ISI/SCOPUS Cited Publication)

T Tharsika, ASMA Haseeb, SA Akbar, MFM Sabri, Co- synthesis of ZnO/SnO2 mixed nanowires via a single-step carbothermal reduction method , Ceramics International. doi: http://dx.doi.org/10.1016/j.ceramint.2013.08.142 [Q1] (ISI-Cited Publication)

MR Sohel, R Saidur, MFM Sabri, MM Elias, SS Khaleduzzaman, Investigation of Heat Transfer Performances of Nanofluids Flow through a Circular Minichannel Heat Sink for Cooling of Electronics , Advanced Materials Research 832, 166-171. (2014) [ISI/Scopus] (ISI/SCOPUS Cited Publication)

Tharsika T, Haseeb ASMA & Sabri MFM 2014. Photoluminescence Studies on Spray Pyrolysis Deposited ZnO-SnO2 Mixed Thin Films. Advanced Materials Research 925: 318-322. (ISI-Cited Publication)

MFM Sabri, T Ono, SM Said, Y Kawai, M Esashi, "Fabrication and Characterization of Microstacked PZT Actuator for MEMS Applications," Journal of Microelectromechanical Systems, vol.PP, no.99, pp.1,1, doi: 10.1109/JMEMS.2014.2317495 (2014) (ISI-Cited Publication)

Annuar NZM, Sabri MFM & Bakar ASA. 2014. Modeling and simulation of Metal Organic Halide Vapor Phase Epitaxy (MOHVPE) growth chamber. Microsyst Technol, DOI 10.1007/s00542-013-2046-y (ISI-Cited Publication)

Tharsika T, Haseeb A & Sabri MFM. 2014. Structural and optical properties of ZnO SnO2 mixed thin films deposited by spray pyrolysis. Thin Solid Films 558: 283-288 (ISI-Cited Publication)

Amin NAA, Shnawah DA, Said SM, Sabri MFM & Arof H. 2014. Effect of Ag content and the minor alloying element Fe on the electrical resistivity of Sn-Ag-Cu solder alloy. Journal of Alloys and Compounds, Vol. 599, 114 120 (ISI-Cited Publication)

Shahrul IM, Mahbubul IM, Saidur R, Khaleduzzaman SS, Sabri MFM & Rahman MM. 2014. Effectiveness Study of a Shell and Tube Heat Exchanger Operated with Nanofluids at Different Mass Flow Rates. Numerical Heat Transfer, Part A: Applications, 65(7): 699-713 (ISI-Cited Publication)

Sohel MR, Khaleduzzaman SS, Saidur R, Hepbasli A, Sabri MFM & Mahbubul IM. 2014. An experimental investigation of heat transfer enhancement of a minichannel heat sink using Al2O3 H2O nanofluid. International Journal of Heat and Mass Transfer 74: 164-172 (ISI-Cited Publication)

IM Shahrul, IM Mahbubul, R Saidur, MFM Sabri, SS Khaleduzzaman, Energy and Environmental Effects of Shell and Tube Heat Exchanger by Using Nanofluid as a Coolant , Journal of Chemical Engineering of Japan 47 (4), 340-344 (2014). [Q1] (ISI-Cited Publication)
 
2013

Suhana Mohd Said, Chee-Onn Chow, N Mokhtar, Rahizar Ramli, Tuan Mohd Yusoff Shah Tuan Ya, Mohd Faizul Mohd Sabri, Accreditation of engineering programs: An evaluation of current practices in Malaysia, International Journal of Technology and Design Education, DOI 10.1007/s10798-011-9180-6 (2011) [Q3] (ISI-Cited Publication)

Yingxin Goh,A.S.M.A. Haseeb,Mohd Faizul Mohd Sabri. 2013.Electrodeposition of Lead-free solder alloys. Soldering & Surface Mount Technology. 25(2).76-90. (ISI/SCOPUS Cited Publication)

N. ZIEYANA MOHAMED ANNUAR, MOHD FAIZUL MOHD SABRI. A.SHUHAIMI ABU BAKAR, INVESTIGATION OF THE GEOMETRY MODELING OF METAL ORGANIC HALIDE VAPOR PHASE EPITAXY (MOHVPE)REACTOR, ADVANCED MATERIAL RESEARCH, VOL. 626 (2013), 396-400 (ISI/SCOPUS Cited Publication)

FATIN SYAZANA JAMALUDIN, MOHD FAIZUL MOHD SABRI, INVESTIGATION ON HIGH ASPECT RATIO MICROHOLES ON SILICON BY FIB/SEM MILLING, ADVANCED MATERIALS RESEARCH, VOL. 626 (2013), 436-439 (ISI/SCOPUS Cited Publication)

Yingxin Goh,A.S.M.A. Haseeb,Mohd Faizul Mohd Sabri. 2013. Effects of Hydroquinone and Gelatin on the Electrodeposition of Sn-Bi Low Temperature Pb-Free Solder. Electrochimica Acta.90. 265-273. (ISI/SCOPUS Cited Publication)

RS Datta, SM Said, SR Sahamir, MR Karim, MFM Sabri, T Nakajo, et al., Thermoelectric Potential of Polymer- Scaffolded Ionic Liquid Membranes , Journal of Elec Materi., doi: 10.1007/s11664-013-2799-1 (2013):1-5. (2013) [Q2] (ISI/SCOPUS Cited Publication)

D.A.-A. Shnawah, M.F.M. Sabri, I.A. Badruddin, S.B.M. Said, Tadashi Ariga, F.X. Che, Effect of Ag Content and the Minor Alloying Element Fe on the Mechanical Properties and Microstructural Stability of Sn-Ag-Cu Solder Alloy Under High-Temperature Annealing, J. Electron. Mater . DOI: 10.1007/s11664-012-2343-8 

Sabri, M. F. M., Shnawah, D. A., Badruddin, I. A., Said, S. B. M., Che, F. X., & Ariga, T. 2013. Microstructural stability of Sn 1Ag 0.5Cu xAl (x = 1, 1.5, and 2 wt.%) solder alloys and the effects of high- temperature aging on their mechanical properties. Materials Characterization, 78(0), 129-143. (ISI-Cited Publication)

MA Kamarudin, SR Sahamir, RS Datta, BD Long, MF Sabri, & SM Said, A Review on the Fabrication of Polymer-Based Thermoelectric Materials and Fabrication Methods The Scientific World Journal, 17. doi: 10.1155/2013/713640 (2013). [Q1] (ISI/SCOPUS Cited Publication)

T Tharsika, A Haseeb, SA Akbar, MFM Sabri, Catalyst free Single-Step fabrication of SnO2/ZnO core-shell nanostructures, Ceramics International, (2013) [Q1] 

FS Jamaludin, MFM Sabri, SM Said, Controlling parameters of focused ion beam (FIB) on high aspect ratio micro holes milling, Microsys. Technol, DOI 10.1007/s00542- 013- 1912-y, (2013) [Q3] (ISI/SCOPUS Cited Publication)

M.R. Sohel, R. Saidur, M.F.M. Sabri, M. Kamalisarvestani, M.M. Elias, Ali Ijam, Investigating the Heat Transfer Performance and Thermophysical Properties of Nanofluids in a Circular Micro-channel, International Communication in Heat and Mass Transfer, 42, (2013) pp. 75-81. (ISI/SCOPUS Cited Publication)
 
2012

Dhafer Abdul-Ameer Shnawah, Mohd Faizul Mohd Sabri, Irfan Anjum Badruddin, A review on thermal cycling and drop impact reliability of SAC solder joint in portable electronic products, Microelectronics Reliability 52 (2012) 90 99 (ISI-Cited Publication)

D.A.-A. Shnawah, S.B.M. Said, M.F.M. Sabri, I.A. Badruddin,F.X. Che, "Microstructure, mechanical, and thermal properties of the Sn-1Ag-0.5Cu solder alloy bearing Fe for electronics applications", Materials Science & Engineering A (2010), doi:10.1016/j.msea.2012.04.115 [Q1] (ISI-Cited Publication)

Dhafer Abdul-Ameer Shnawah, Suhana Binti Mohd Said, Mohd Faizul Mohd Sabri, Irfan Anjum Badruddin, Fa Xing Che, "Novel Fe-containing Sn 1Ag 0.5Cu lead-free solder alloy with further enhanced elastic compliance and plastic energy dissipation ability for mobile products", Microelectron Reliab (2012), http://dx.doi.org/10.1016/j.microrel.2012.03.028 [Q2] (ISI-Cited Publication)

Dhafer Abdul-Ameer Shnawah, Mohd Faizul Mohd Sabri, Irfan Anjum Badruddin, FaXing Che, The bulk alloy microstructure and tensile properties of Sn-1Ag-0.5Cu-xAl lead-free solder alloys (x=0, 1, 1.5 and 2 wt.%) , Microelectronics International Vol.29, No.2 (2012) [Q4] (ISI-Cited Publication)

Dhafer Abdulameer Shnawah, Mohd Faizul Mohd Sabri, Irfan Anjum Badruddin and Suhana Binti Mohd Said, A review on effect of minor alloying elements on thermal cycling and drop impact reliability of low-Ag Sn-Ag-Cu solder joints , Microelectronics International Vol.29, No.1, (2012) [Q4] (ISI-Cited Publication)

Liang He, Masaya Toda, Yusuke Kawai, Mohd Faizul Sarbi, Mamoru Omori, Toshiyuki Hashida, Takahito Ono, 2012, Fabrication of a Si-PZT Hybrid XY-Microstage with CNT- Carbon Hinges,IEEJ Transactions on Sensors and Micromachines, Vol. 132, No. 11, pp:425-426 (SCOPUS-Cited Publication)

Dhafer Abdul-Ameer Shnawah, Mohd Faizul Mohd Sabri, Irfan Anjum Badruddin, Suhana Binti Mohd Said & Fa Xing Che, 'The bulk alloy microstructure and mechanical properties of Sn 1Ag 0.5Cu xAl solders (x = 0, 0.1 and 0.2 wt. %),J Mater Sci: Mater Electron, DOI 10.1007/s10854-012-0692-y (ISI-Cited Publication)

Shnawah, D. A. A., Said, S. B. M., Sabri, M. F. M., Badruddin, I. A., Hoe, T. G., Che, F. X., & Abood, A. N. (2012). Microstructure and Tensile Properties of Sn- 1Ag-0.5Cu Solder Alloy Bearing Al for Electronics Applications. Journal of Electronic Materials, 41(8), 2073-2082 (ISI-Cited Publication)

Shnawah, D. A., Sabri, M. F. M., & Badruddin, I. A. (2012). The Limited Reliability of Board-Level SAC Solder Joints under both Mechanical and Thermo- mechanical Loads. Informacije Midem-Journal of Microelectronics Electronic Components and Materials, 42(1), 3-10. (ISI-Cited Publication)

DHAFER ABDULAMEER SHNAWAH,SUHANA BINTI MOHD SAID, MOHD FAIZUL MOHD SABRI, IRFAN ANJUM BADRUDDIN, and FA XING CHE, 'High-Reliability Low-Ag-Content Sn-Ag- Cu Solder Joints for Electronics Applications',Journal of ELECTRONIC MATERIALS, Vol. 41, No. 9, 2012 (ISI-Cited Publication)
 
2011

Dhafer Abdulameer Shnawah, Mohd Faizul Mohd Sabri, Irfan Anjum Badruddin, "A REVIEW ON THERMAL CYCLING AND DROP IMPACT RELIABILITY OF SOLDER JOINTS IN ELECTRONIC PACKAGES", INFORMACIJE MIDEM-JOURNAL OF MICROELECTRONICS ELECTRONIC COMPONENTS AND MATERIALS Vol. 41, No. 3, pp: 186-192 (2011) (ISI-Cited Publication)
 
2009

Mohd Faizul Mohd Sabri, Takahito Ono, Masayoshi Esashi, Microassembly of PZT actuators into silicon microstructures , IEEJ Trans. on Sensors and Micromachines (SCOPUS-Cited Publication)

Takahito Ono, M. Faizul, Shinya Yoshida, Masayoshi Esashi, "Monolithic PZT Multi-Axis Microstage", Material Integration, vol.22. no.4, pp:39-44, 2009 (Japanese) 

Mohd Faizul Mohd Sabri, Takahito Ono, Masayoshi Esashi. 2009. Modeling and experimental validation of the performance of a silicon XY-microstage driven by PZT actuators. Journal of Micromechanics and Microengineering 19(9):095004 (ISI-Cited Publication)
 
2007

B.N. Taufiq, H.H. Masjuki, T.M.I. Mahlia, M.S. Faizul, R. Saidur & E. Niza Mohamad. 2007. Second law analysis for optimal thermal design of radial fin geometry by convection. International Journal of Applied Thermal Engineering, Elsevier Ltd., UK, 27:1363-1370 (ISI-Cited Publication)

C.A. Azlan, N.F Mohd Nasir, A.A. Saifizul, M.S. Faizul, K.H. Ng, & B.J.J. Abdullah. 2007. A low cost solution for post-biopsy complications using available RFA generator and coaxial core biopsy needle. Australasian Physical & Engineering Sciences in Medicine, 30(4):288- 291 (ISI-Cited Publication)

B.N. Taufiq, H.H. Masjuki, T.M.I. Mahlia, M.A. Amalina, M.S. Faizul, R. Saidur. Exergy analysis of evaporative cooling for reducing energy use in a Malaysian building. Desalination - International Journal, Elsevier Ltd., UK, 2006, pp. 238-243 (ISI-Cited Publication)
 
2006

M.S Faizul, J Sabariah, R Shaifulazuar, R Saidur, Microstructure and Mechanical Propersties of Sintered Zirconia Produced by Injection Moulding Process, International Journal of Mechanical and Materials Engineering (IJMME), Vol. 1 (2006), No.2, pp. 95-99 
 
2005

SM Said, MS Faizul, NA Rahim, M Mahazani, The government- industry-university relationship towards a knowledge- based economy, AEESEAP Journal of Engineering Education, Vol.31 (2005), pp 1-6 
 
Proceeding
 
2013

Suhana Mohd Said, Shahrir Razey Sahamir, Megat, Muhammad Ikhsan Megat Hasnan, Mohd Faizul Mohd Sabri, Multiscale simulation of thermoelectric generation (TEG) devices for waste heat conversion , Regional Conference on Mechanical and Aerospace Technology, 2-13 Feb 2013, Bangkok, Thailand 
 
2012

Suhana M. Said, Mohd Faizul Mohd Sabri, Dayang Nurulain Abg Mohd Moasili, Fabrication of Thermoelectric Materials through Electroplating for Green Technology Applications", Fourth AUN/Seed-Net Regional Conference on Global Environment (Invited Paper), 17-19 January 2012, Bangkok, Thailand. 

Mohd Faizul Mohd Sabri, Dhafer Abdul-Ameer Shnawah, Irfan Anjum Badruddin, Suhana Binti Mohd Said, A Compliant Lead-Free Solder Alloy, IEEE-ICSE2012 Proc., 2012, Kuala Lumpur, Malaysia 

Goh Y.; Haseeb, A.S.M.A.; Sabri, M.F.M. (2012). Effects of hydroquinone and gelatin on the electrodeposition of SnBi low temperature Pb-free solder. 4th Asia Symposium on Quality Electronic Design (ASQED), 306 - 312. doi: 10.1109/ACQED.2012.6320521 

Mohd Faizul Mohd Sabri, Dhafer Abdul-Ameer Shnawah, Irfan Anjum Badruddin, and Suhana Binti Mohd Said, Microstructural Stability and Mechanical Properties of Sn-1Ag-0.5Cu Solder Alloy With 0.1 wt.% Al Addition Under High-Temperature Annealing , 35th International Electronic Manufacturing Technology Conference, 6-8 November 2012, Ipoh, Malaysia 
 
2011

Mohd Faizul Bin Mohd Sabri, Dhafer Abdulameer Shnawah, Suhana Mohd Said, Irfan Anjum Badruddin, "High Reliability and Low Cost Al/Fe added Lead Free SAC Solder", AUN-SEED Net Regional Conference on Materials, 95-98, 8-9 Dec 2011, Hanoi, Vietnam 
 
2010

Mohd Faizul Sabri, Takahito Ono, Suhana Mohd Said, Esashi Masayoshi, High power density microactuator for MEMS applications , Regional conference on Mechanical and Aerospace Technology, 329-1-7, 9-10 Feb 2010, Bali, Indonesia 
 
2009

Mohd Faizul Mohd Sabri, Takahito Ono, Esashi Masayoshi, A large displacement piezodriven silicon XY-microstage, Transducers 2009, 21-25 June 2009, Denver, USA, pp:2405- 2408 
 
2008

Mohd Faizul Mohd Sabri, Takahito Ono, Yusuke Kawai and Masayoshi Esashi, A Si-PZT Hybrid XY-Microstage Utilizing an Actuator Amplification Mechanism, Proc. of Actuator 2008, 9-11 June 2008, Bremen, Germany, pp:75-78. 

Mohd Faizul Mohd Sabri, Takahito Ono and Masayoshi Esashi, Fabrication and Integration of a Si-PZT Hybrid XY-microstage, Digest. Of the 21st Intl. Microprocesses and Nanotechnology conference (MNC 2008), 27-30 October 2008, Fukuoka, Japan, pp:62-63. 

Mohd FAIZUL Mohd Sabri, Takahito ONO and Masayoshi ESASHI, Silicon XY-stage Actuated by Stacked PZT Actuators, Proc. of the 8th International Symposium on Advanced Fluid Information and Transdisciplinary Fluid Integration, pp.28-29, 19-20 December 2008, Sendai, Japan 
 
2007

M.S Faizul, T. Ono and M. Esashi, Design and Development of Si-PZT Hybrid XY-Microstage, 24th Sensor Symposium, 16-17 Oct 2007, Tokyo, Japan, pp:173-178. 

Mohd Faizul Mohd Sabri, Takahito Ono and Masayoshi Esashi, A Si-PZT Hybrid XY-Microstage for High-density Data Storage , 1st Symposium on Micro Environmental Machine Systems, pp.52-53, 18 December 2007, Sendai, Japan 
 
2006

C.A. Azlan, B.J.J. Abdullah, N.F. Mohd. Nasir, N.A. Kadri, M.S. Faizul and A.A. Saifizul An adapter for post-biopsy radiofrequency characterization , International Conference on Man-Machine Systems 2006, 15th - 16th September 2006, Langkawi, Malaysia 
 
2005

M.Varman, M.S Faizul, H.H Masjuki, M.A Kalam and T.M.I Mahlia, Study of lubricant viscosity from a diesel engine operating on various percentages of coconut oil blended fuel , World Tribology Congress (WTC III), September 12-16, 2005, Washington D.C, USA, WTC2005-63263 

H.H Masjuki, M.G Saifullah, M. Husnawan, M.S Faizul and M.G. Shaaban, Flash Temperature Parameter Number Prediction Model by Design of Tribological Experiments for Basestock Mineral Oil Containing Palm Olein and Aminephosphate Additives , World Tribology Congress (WTC III), September 12-16, 2005, Washington D.C, USA, WTC2005-63193 

M.G. Saifullah, H.H. Masjuki, M. Husnawan, M.S Faizul and T.M.I. Mahlia, Thermal Analysis of Diesel Engine Cylinder Head Carbon Deposits while Fueled by Diesel Fuel Water Emulsion , 18th I.C.E Symposium (International), December 20-22, 2005, Jeju, Korea, JSAE 20056121 

B.N. Taufiq, T.M.I. Mahlia, H.H. Masjuki, M.S Faizul and E. Niza Mohamad, Optimization Of Radial Convective Radiating Fin Geometry For Single Cylinder Internal Combustion Engine (ICE): Entropy Generation Minimization , Proceedings of ICES2005:Internal Combustion Engine Division Spring Technical Conference, April 5 7, 2005, McCormick Place Convention Center, USA. 

B.N. Taufiq, T.M.I. Mahlia, H.H. Masjuki, M.S Faizul and E. Niza Mohamad, Optimization Of Radial Convective Radiating Fin Geometry For Single Cylinder Internal Combustion Engine (ICE): Entropy Generation Minimization , Proceedings of ICES2005:Internal Combustion Engine Division Spring Technical Conference, April 5 7, 2005, McCormick Place Convention Center, USA. 
 
Others
 
2010

MOHD FAIZUL, KITAIKUODAI NO OMAIDE, 50 YEARS ANNIVERSARY OF KITAMI INSTITUTE OF TECHNOLOGY, HOKKAIDO, JAPAN, 2010 
 
2003

M. FAIZUL M. SABRI, AJIA NO BUNKA NO KABE (THE WALL OF CULTURE IN ASIA) INTERNATIONAL STUDENTS SYMPOSIUM(JAPANESE)2003 
 
1999

M. FAIZUL, NIHON, DAI 2 NO BOKOKU , RYUUGAKUSEI KYOURYOU NEWS (FOREIGN STUDENTS EXCHANGE NEWS) - HOKKAIDO FOREIGN STUDENT EXCHANGE REPORT(JAPANESE)10 1999 

AREAS OF RESEARCH
(Project title), (Role), (From)-(Until), (Source), (Level).

Green Technology

Sustainable Engineering

Fabrication Of Thermoelectric Material Through Inkjet Printing, Principal Investigator(PI), 01/01/2013, Postgraduate Research Grant (PPP) - Research, 31/12/2015

Fundamental Studies of Incorporation of Nanoparticles in Biomaterials for Thermoelectric Device by Electrospinning, Principal Investigator(PI), 15/05/2013, Fundamental Research Grant Scheme (FRGS), 14/05/2015

Mechanical and microstructural characteristics of element added SAC solder alloy., Principal Investigator(PI), 01/06/2013, Geran Penyelidikan Universiti Malaya (UMRG) - AET (Innovative Technology (ITRC)), 31/05/2015

Nanostructure Thermopile Thermal-based Energy Harvester with Thermal Concentrator for Wireless Sensor Network (WSN) Applications in Biomedical and Precision Agriculture, Co-Investigator, 2012-2014, ScienceFund, National

Investigation on the use of metal nanopowder in forming a high aspect ratio 3D microstructure, Principal Investigator(PI), 2012-2014, Fundamental Research Grant Scheme (FRGS), National

THE TRIBOLOGICAL BEHAVIOR COMPARISON OF THESE DLC SURFACES AFTER THE WEAR TESTS, Principal Investigator(PI), 01/07/2012, Geran Penyelidikan Universiti Malaya (UMRG) - AET (Innovative Technology (ITRC)), 30/06/2015

NEW METHOD OF FORMING HIGH ASPECT RATIO MICROSTRUCTURE USING METAL NANOPOWER, Principal Investigator(PI), 01/06/2012, Postgraduate Research Grant (PPP) - Research, 31/05/2014

Analysis and Modeling of Insect Flight Kinematics for Emulation in Biomimetic Micro Air Vehicles, Co-Researcher, 02/10/2012, Geran Penyelidikan Universiti Malaya (UMRG) - AET (Innovative Technology (ITRC)), 02/04/2015

Incorporation of gamat-loaded chitosan into biomimetic hydroxyapatite (HA) nanolayer superplastically embedded on titanium for medical implant application., Co-Researcher, 02/10/2012, Geran Penyelidikan Universiti Malaya (UMRG) - AET (Innovative Technology (ITRC)), 18/11/2014

Clean diesel technology for military and civilian transport vehicles, Co-Investigator, 2011-2015, HIR, National

HIGH ASPECT RATIO MICRO FILLING FOR MEMS USING METAL NANOPOWDER, Principal Investigator(PI), 01/09/2010, HIR, 31/08/2011

High aspect ratio micro filling for MEMS using metal nanopowder, Principal Investigator(PI), 2010-2011, Geran Penyelidikan Universiti Malaya (UMRG), National

FUNDAMENTAL STUDIES ON NANOSTRUCTURED THERMOELECTRIC MATERIAL USING THE ELECTROPLANTING PROCESS, Principal Investigator(PI), 15/04/2010, Geran Penyelidikan Universiti Malaya (UMRG), 14/04/2012

Nano Fabrication and Nano Devices, Principal Investigator(PI), 2008, 

Energy Efficient Nano Coating To Control Solar Radiation Through The Glasses Of Building Windows, RM9 eSciencefund No. 03-01-03-SF0158, Principal Investigator(PI), 2008-2009, ScienceFund, National

Remote Control Mobile Platform for Critical Environment, Vot-F: F0353/2003D, Principal Investigator(PI), 2004-2005, Postgraduate Research Grant(PPP), National

Linear Generator Project (UTP, UKM, UM), Modelling, Design, Modification and Test of a New Free Piston Gas Generator, IRPA Grant No: 03-02-03-0001- PR0025/04-02, - Researcher, 2003-2006, MOSTI (IRPA)

CONSULTATION PROJECT/CONSULTANCY
(Project title), (Role), (From)-(Until), (Organisation).

Strain and Stress Testing for Diodes, Consultant, 2006-2006, Siemens VDO Instruments MY Sdn Bhd

AWARDS AND RECOGNITIONS
(Name of Award), (Awarding Institution), (Year Awarded), (Level).

Anugerah Tamat PhD kurang dari 3 tahun, University Malaya, 2010

Anugerah perkhidmatan cemerlang, Univerity Malaya (2005), University of Malaya, 2005

EXCELLENT SERVICE AWARD, UNIVERSITY MALAYA, 2012

Fellowship of Rotary International, Yoneyama Rotary International, 1999

Geran Sanjungan Penyelidikan 2012, Ministry of Higher Education Malaysia, 2013

Hitachi Scholarship, Hitachi Scholarship Foundation, 2006

Research, Invention and Innovation Expo 2005, University Malaya, 2005

Research, Invention and Innovation Expo 2005, University of Malaya, 2005

Research, Invention and Innovation Expo 2007, University of Malaya, 2007

Science & Technology Research Grant, Malaysia Toray Science Foundation , 2011

PRESENTATIONS
(Title), (Event), (Date Presented), (Organiser), (Level).
 
Invited Speaker

High power density microactuator for MEMS applications, Regional conference on Mechanical and Aerospace Technology, 09 Feb 2010 to 10 Feb 2010

Ajia no Bunka no Kabe (The Wall of Culture in Asia) - Japanese, International Students Symposium, 09 Sep 2003 to 10 Sep 2003, (International)

Mount Kinabalu & Kinabalu Park - Introduction & The Conservation Works, International Symposium on UNESCO World Heritage, 20 Sep 2006 to 20 Sep 2009, (International)
 
Oral

Effects of Hydroquinone and Gelatin on the Electrodeposition of Snbi Low Temperature Pb-Free Solder, Quality Electronic Design (ASQED)4th Asia Symposium, 09 Jul 2012

A Si-PZT Hybrid XY-Microstage Utilizing an Actuator Amplification Mechanism, Actuator, 09 Jun 2008 to 11 Jun 2008, (International)

Study of lubricant viscosity from a diesel engine operating on various percentages of coconut oil blended fuel, World Tribology Congress, 12 Sep 2005 to 17 Sep 2005, (International)

Fabrication of Thermoelectric Materials through Electroplating for Green Technology Applications, Fourth AUN/Seed-Net Regional Conference on Global Environment, 18 Jan 2012 to 19 Jan 2012, (International)

Silicon XY-stage Actuated by Stacked PZT Actuators, International Symposium on Advanced Fluid Information and Transdisciplinary Fluid Integration, 19 Dec 2008 to 20 Dec 2008, (International)

A large displacement piezodriven silicon XY-microstage, Transducers, 21 Jun 2009 to 25 Jun 2009, (International)

Fabrication and Integration of a Si-PZT Hybrid XY- microstage, Microprocesses and Nanotechnology conference, 27 Oct 2008 to 30 Oct 2008, (International)
 
Poster

Design and Development of Si-PZT Hybrid XY-Microstage, Sensor Symposium, 16 Oct 2007 to 17 Oct 2007, (National)
 
Presenter

Multiscale simulation of thermoelectric generation (TEG) devices for waste heat conversion, Regional Conference on Mechanical and Aerospace Technology Bangkok, 01 Dec 2013

Optimization Of Radial Convective Radiating Fin Geometry For Single Cylinder Internal Combustion Engine (ICE): Entropy Generation Minimization, ICES2005, 01 Jan 2005

Optimization Of Radial Convective Radiating Fin Geometry For Single Cylinder Internal Combustion Engine (ICE): Entropy Generation Minimization, ICES2005, 01 Jan 2005

Thermal Analysis of Diesel Engine Cylinder Head Carbon Deposits while Fueled by Diesel Fuel Water Emulsion, 18th I.C.E Symposium, 01 Jan 2005

Flash Temperature Parameter Number Prediction Model by Design of Tribological Experiments for Basestock Mineral Oil Containing Palm Olein and Aminephosphate Additives, World Tribology Congress, 01 Jan 2005

Study of lubricant viscosity from a diesel engine operating on various percentages of coconut oil blended fuel, World Tribology Congress, 01 Jan 2005

An adapter for post-biopsy radiofrequency characterization, International Conference on Man-Machine Systems, 01 Jan 2006

A Si-PZT Hybrid XY-Microstage for High-density Data Storage, 1st Symposium on Micro Environmental Machine Systems, 01 Oct 2007

Microstructural Stability and Mechanical Properties of Sn-1Ag-0.5Cu Solder Alloy With 0.1 wt.% Al Addition Under-Temperature Annealing, 35th International Electronic Manufacturing Technology Conference, 06 Nov 2012 to 08 Nov 2012

High Reliability and Low Cost Al/Fe added Lead Free SAC Solder, AUN-SEED Net Regional Conference on Materials, 08 Dec 2011 to 09 Dec 2011, AUN-SEED Net, (International)

A Compliant Lead-Free Solder Alloy, IEEE-ICSE2012, 19 Sep 2012 to 21 Sep 2012

SUPERVISION

 
Post Graduate Level
(Name of Degree), (Name of Candidates), (Title of Thesis), (Academic Session)

Completed

Masters Degree, Saifullah Md Ghazali, Study of the Palm Olein as Lubricant, 2005/2006

Doctoral Degree (PhD), Dhafer Abdul Ameer Shinawah, SAC low cost lead free solder,, 2010/2011

Masters Degree, Fatin Syazana Jamaludin, High aspect ratio Microstructure, 2010/2011

Masters Degree, Nurul Zieyana Binti Mohamed Annuar, Design and Simulation of MOHCVD growth chamber, 2010/2011

Masters Degree, Mohammad Sajid Hossain, Heat Transfer in Nanofluid, 2011/2012

Ongoing

Doctoral Degree (PhD), Goh Ying Xin, Lead Free solder, 2010/2011

Doctoral Degree (PhD), Lee Soon Li, MOLECULAR DYNAMIC SIMULATION OF THERMAL TRANSPORT OF NANOFLUIDS, 2011/2012

Masters Degree, Md Sohel Rana, NANOFLUIDS IN ENHANCING THE PERFORMANCE OF HEAT EXCHANGERS., 2011/2012

Doctoral Degree (PhD), Tharsika Thabothanayakam, GROWTH OF ZnO/SnO2 MIXED OXIDE NANOWIRE AND ENHANCING THE PERFORMANCE BY LOADING METAL AND METAL OXIDE NANOPARTICLES FOR GAS SENSING APPLICATIONS, 2011/2012

Doctoral Degree (PhD), Mohamad Mamunur Rashid, Polymer Thermoelectric Material, 2013/2014

Doctoral Degree (PhD), Mohamed Hamid Elsheikh Yousef, Skutterudites Thermoelectric Material, 2012/2013

Doctoral Degree (PhD), Mohamed Bashir Ali Bashir, Fabrication of Thermoelectric Device Through Inkjet Printing, 2012/2013

Doctoral Degree (PhD), Norfazila Mohd Sultan, Boronizing thin plate, 2014/2015

Doctoral Degree (PhD), Mohammad Hossein Mahdavifard, Fouth element added lead free solder alloy, 2013/2014
 
First Degree/Diploma/Pre-Degree
(Course Title), (Academic Session), (No. of Candidates)

Completed

Solid state diffusion bonding of super plastic of duplex stainless steel with carbon, 2003/2004, 2

Sintered Injection Molding, 2003/2004, 1

Study on coolant effect during high speeds grinding, 2003/2004, 2

Design and Development of Remote Control Mobile Platform for Critical Environment, 2003/2004, 2

Ergonomics: The study and design of a lecture theater, 2003/2004, 1

Grinding wheel modeling, 2004/2005, 1

Design and Fabrication of Coolant Supply System for Surface Grinding, 2004/2005, 1

The effect of coolant application methods on the grinding process, 2004/2005, 1

Design and development of remote control mobile platform, 2004/2005, 2

Study and design of a Turbine to recover Lost Energy during the Throttling Process in Spark Ignition Engines, 2005/2006, 1

Study and Design of new Method of coolant application methods on the grinding process, 2005/2006, 1

Design and Development of temperature measurement method for grinding process, 2005/2006, 1

Study on Coolant Flow Behaviour at the Wheel Work Surface during Grinding Process, 2005/2006, 1

INTELLECTUAL PROPERTY RIGHTS
(Product Name), (Type), (Reference), (Year), (Level).

A compliant and aging resistant lead-free solder alloy, Patent, PI 2012001013, 2012, (National)

Ultrasonic Hot Plate Apparatus, Patent, PI 2012700190, 2012, (National)

Fishbone Electrostatic Comb Drive Actuator, Patent, 2012701203, 2012, (National)

Membrane Scaffolded Ionic Liquid Structure for Enhanced Electrical Conductivity, Patent, (University)

EXPERT LINKAGES
(Linkages Description), (Organisation), (Year of Involvement), (Duration), (Level).

Collaboration for Development of Thermopile device for energy recovery, MIMOS, 2013, 24, (University)

EXPERT/TECHNICAL CONTRIBUTIONS
(Activity), (Organisation), (Role), (From)-(Until), (Level).

Technnical Committee for Furniture - To develop Malaysian Standard for Furniture, SIRIM Bhd, Committee Member, 2003-2006, (National)

Mechanical course consultant for Yayasan Ilmuan offered for Japanese Associate Degree program., Yayasan Ilmuan, Expert Advisor, 2010-2011, (National)

Judge, Invention and Innovation Exhibition 2013 (IRIIE: 2013), International Islamic University Malaysia, International Islamic University Malaysia, Judge, 2013-2013, (National)

Judge, Ekspo Inovasi Islam 2012, UNiversiti Sains Islam Malaysia, Judge, 2012-2012, (National)

TEACHING
(Course Title), (Academic Session), (No of Student), (No of Contact Hours).


Post Graduate

FABRICATION AND MATERIAL SELECTION, 2011/2012(1), 11, 48

First Degree

ELEMENTAL DESIGN OF MECHANICAL ENGINEERING, 2003/2004(1), 80, 0

PRODUCT DEVELOPMENT AND DESIGN, 2004/2005(2), 80, 0

ELEMENTAL DESIGN OF MECHANICAL ENGINEERING, 2005/2006(1), 80, 0

PRODUCT DEVELOPMENT AND DESIGN, 2005/2006(2), 80, 0

PRECISION ENGINEERING, 2004/2005(2), 40, 0

PRODUCT DEVELOPMENT AND DESIGN, 2009/2010(2), 35, 5

ELEMENTAL DESIGN OF MECHANICAL ENGINEERING, 2010/2011(1), 60, 5

PRODUCT DEVELOPMENT AND DESIGN, 2010/2011(2), 55, 50

PRECISION ENGINEERING, 2012/2013, 3, 4

EVALUATION ACTIVITIES
(Description), (Evaluation Activity).

Reviewer, National Conference on Engineering and Technology (NACET 2004), Article In Proceeding

Reviewer, AEESEAP Conference, Article In Proceeding

Reviewer, International Conference on Recent Advances in Mechanical & Materials Engineering (ICRAMME 2005), Article In Proceeding

Reviewer, International Conference on Modeling and Simulation (MS 2006), Article In Proceeding

Internal Examiner, Master of Engineering Science, Study on Superplastic Boronizing of Duplex Stainless Steel (DSS) by Superplastics Compression Approach, Thesis

Review of Article, ASM Science Journal, Article In Journal

Review of article in journal Soldering & surface mount technology, Article In Journal

Review full paper for WRICET2012, Article In Proceeding

Review of Article, ASM Science Journal, Article In Journal

Review of article, Smart Materials and Structures, Article In Journal

Internal Examiner, Master of Engineering Science, Dynamic Analysis of the tower Crane, Thesis

Internal Examiner, Masters of Engineering Science, Development of Boronized Duplex Stainless Steel Mini Gear Through Superlastic Deformation, Thesis

Review of article, journal of Soldering & Surface Mount Technology, Article In Journal

Internal Examiner, Masters of Engineering, Role of Thermol-Physical Properties of Refrigerant on the Thermal Performance of a Refrigeration System, Thesis

Internal Examiner, Masters of Engineering, Fuel Saving and Cost Reduction of Start-Stop Technology for an Internal, Thesis

Review of article, Indian Journal of Engineering & Materials Sciences, Article In Journal

ESREF 2014, the 25th anniversary of the European Symposium on Reliability of Electron Devices, Failure Physics and Analysis, Article In Proceeding

CONTRIBUTION TO SOCIETY
(Contribution To Society), (Level), (Start Date), (End Date).

Program selangkah ke menara gading oleh kelab anak-anak sik, kedah, (National), 10-Mar-12 until 13-Mar-12

Member, Kelab Anak-anak Sik, Kedah, (Community), 01-Jan-12

Instructor, Kem Pemudahcara Mahasiswa Kolej Bestari 2013/14, Pulau Tinggi,Mersing Johor, 28 Jun - 2 Julai 2013, (Ptj), 28-Jun-13 until 02-Jul-13