Click to Print This Page

 

CURRICULUM VITAE
PERSONAL DETAIL

Name
  Prof. Dr. Saidur Rahman Abdul Hakim
Designation
  Professor
Department
  Department of Mechanical Engineering
Faculty
  Faculty of Engineering
Tel. No. (Office)
  03-79677611
Fax No.
  03-79675317
E-mail Address
  saidur@um.edu.my
ResearcherID Link
  http://www.researcherid.com/rid/B-7776-2010
Address(Office)
  Department of Mechanical Engineering, Faculty of Engineering Building, University of Malaya, 50603 Kuala Lumpur, MALAYSIA

BIOGRAPHY

Saidur Rahman holds a PhD and an M.Eng.Sc. from University of Malaya, Malaysia and a B.Sc. in Mechanical Engineering from Bangladesh University of Engineering and Technology (BUET), Bangladesh. Presently he is a Professor at the Department of Mechanical Engineering, University of Malaya. 
Heserved as an Editor in Chief of International Journal of Mechanical and Materials Engineering (IJMME), an Associate Editor in Chief International Journal of Renewable Energy Research and Engineering e Transaction. He is also reviewer of several international journals in the field of Energy.  He is serving as an Editorial board member of 5 international Journals.
 
Dr Saidur is working in the field of Industrial, residential and commercial sector energy management, energy efficiency, Policy. He is also working on the thermal performance of nanofluids operated heat exchangers.

He has supervised more than 50 postgraduate students and currently about 25 students under his supervision.
 
Dr Saidur has 2580 citations with an h-index of 28. He has published more than 250 papers in international, regional, and local journals and presented/published more than 150 papers in international, regional, and local conferences, seminars and symposium. He is one of the top ISI publishers at the University level. He won highest accumulated citation award for the years 2011 and 2012. He has secured and managed grants from different sources as well.

ACADEMIC QUALIFICATION
(Qualification), (Institution).
Doctor of Philosophy (Energy, exergy and environment), UNIVERSITY OF MALAYA (UM)
M.Eng.Sc., UNIVERSITY OF MALAYA (UM)
B.SC. Eng. (Mechanical), UNIVERSITY OF ENGINEERING & TECHNOLOGY, BANGLADESH

PROFESSIONAL AFFILIATION/MEMBERSHIP
(Organisation), (Role), (Year), (Level).

Malaysian Tribology Society, Life Member, 2011, (National)

Institution of Engineers Bangladesh (IEB), Member, 2000, (International)

ADMINISTRATIVE DUTIES
(Role), (Level), (Start date),(End Date).


Associate Editir In Chief, Engineering e Transaction, Faculty Of Engineering

Associate Editor In Chief, International Journal of Renewable Energy Research, Department Of Electrical Engineering, Faculty Of Engineering

Memeber, SCOPUS, University Malaya, 01-Jan-13 - 31-Jan-13

Acting Head, Scholarly publication Unit, University Malaya, 03-Dec-12 - 06-Nov-12

Mentor, Faculty Of Engineering, 01-Dec-12 - 31-Dec-12

Warden, Department Of Mechanical Engineering, Faculty Of Engineering, 01-Dec-12 - 31-Dec-12

Acting Head, Scholarly publication Unit, University Malaya, 26-Nov-12 - 29-Nov-12

Acting Head, Scholarly publication Unit, University Malaya, 14-Nov-12 - 16-Nov-12

Acting Head of Scholarly publication unit, University Malaya, 17-May-12 - 23-May-12

Committee member for improving lab conditions, Department Of Mechanical Engineering, Faculty Of Engineering, 09-May-12 - 03-Jun-12

Acting Head of Scholarly Publication Unit, University Malaya, 25-Apr-12 - 27-Apr-12

Acting Head, Scholarly Publication Unit, University of Malaya, University Malaya, 25-Jan-12 - 27-Jan-12

Programme Coordinator, Department Of Electrical Engineering, Faculty Of Engineering, 01-Jan-12 - 31-Dec-12

Member, Scholarly Publication Unit, University of Malaya, University Malaya, 01-Jan-12 - 31-Dec-12

Acting head of Scholarly publication and Support unit, University Malaya, 17-Oct-11 - 21-Oct-11

, Department Of Mechanical Engineering, Faculty Of Engineering, 01-Jul-11 - 05-Jan-12

Coordinator, Coordinator for outcome based Education, Department Of Mechanical Engineering, Faculty Of Engineering, 01-Jan-11 - 01-Dec-12

CAREER HISTORY
(Post), (Organisation), (Period).


Professor, University of Malaya, 18/10/2012

Associate Professor, University of Malaya, 16/12/2009 until 17/10/2012

Senior Lecturer, UM, 30/06/2007 until 15/12/2009

Lecturer, UM, 02/05/2002 until 26/06/2007

Research Assistant, UM, 01/01/1998 until 31/03/2001

AREAS OF EXPERTISE
(Area).

Application Of Neural Network (Neural Network)

Energy, Exergy (Energy efficiency, Emission)

Environment Analysis And Modeling (Emission, Energy consumption)

Hydrocarbon Refrigerant (Refrigerant, Energy efficiency, thermodynamic performance)

Air-Conditioning And Refrigeration (Refrigerant, Energy consumption)

Application Of Nanofluids In Heat Exchanging Devices (Nanofluids: Cooling, heat transfer, fundamental properties)

Solar Energy (Mapping, Policy, economics, thermal performance, industrial appalication)

Energy Management And Audit (Industrial energy analysis: Policy, energy savings strategies, Exergy analysis of biomass, boiler, and other machineries)

RECENT SELECTED PUBLICATIONS
(Publication).
 
Book
 
2012

Ijam, A. & Saidur, R. 2012. Nanofluids as a coolant for electronic devices. LAP LAMBERT Academic Publishing. 
 
Chapter In Book
 
2012

RISMANCHI, B., SAIDUR, R., MASJUKI, H. H. & MAHLIA, T. M. I. 2012. Cost-benefit analysis of using cold thermal energy storage systems in building applications. In: ZENG, D. (ed.), Energy Procedia:493- 498, 2011 2nd International Conference on Advances in Energy Engineering. 
 
2011

M. A. H. Mamun, T. R. Tanim, M. M. Rahman, R. Saidur, and Shuichi Nagata, Analysis of Mixed Convection in a Lid Driven Trapezoidal Cavity, Convection and Conduction Heat Transfer 
 
Article In Academic Journals
 
2014

G. Pirasteh, R. Saidur, S.M.A.Rahman, N.A. Rahim, A review on development of solar drying applications, Renewable and Sustainable Energy Reviews, 31 (2014) pp. 133-148 (ISI/SCOPUS Cited Publication)

M.A. Khairul, M.A. Alim, R. Saidur, A. Hepbasli, I.M. Mahbubul, Z. Abdin, A. Hossain, Heat Transfer performance and exergy analyses of a corrugated plate heat exchanger using metal oxide nanofluids, International Communications in Heat and Mass Transfer, 50 (2014), 8-14. (ISI/SCOPUS Cited Publication)

M.H Sajid, Z. Said, R. Saidur, M.F.M.B. Sabri, N.A. Rahim, A time variant investigation on the optical properties of water based Al2O3 nanofluids, International Communications in Heat and Mass Transfer, 50 (2014) pp. 108-116. (ISI/SCOPUS Cited Publication)

M.M. Elias, I.M. Shahrul, I.M. Mahbubul, R. Saidur, N.A. Rahim, Effect of Different Nanoparticle Shapes on Shell and Tube Heat Exchanger Using Different Baffle Angles and Operated with Nanofluid, International Journal of Heat and Mass Transfer, 70 (2014) 289 297 (ISI/SCOPUS Cited Publication)

M.H. Mahfuz, A. Kamyar, O. Afshar, M. Sarraf, M.R. Anisur, M.A.Kibria, R.Saidur, I.H.S.C. Metselaar, Exergetic analysis of a solar thermal power system with pcm storage, Energy Conversion and Management, 78 (2014) pp. 486-492 (ISI/SCOPUS Cited Publication)

M.M. Rahman, S. Mojumder, S. Saha, S. Mekhilef, R. Saidur, Augmentation of natural convection heat transfer in triangular shape solar collector by utilizing water based nanofluids having a corrugated bottom wall, International communications in Heat and Mass Transfer, 50 (2014) pp. 117-127 (ISI/SCOPUS Cited Publication)

MH Sajid, Z Said, R Saidur, FRM Adikan, MFM Sabri, NA Rahim, A time variant investigation on optical properties of water based Al2O3 nanofluid , International Communications in Heat and Mass Transfer , http://dx.doi.org/10.1016/j.icheatmasstransfer.2013.10. 006. (2013) [Q1] (ISI-Cited Publication)

R.K. Akikur, R. Saidura, H.W. Ping,K.R. Ullah 2014.Performance analysis of a co-generation system using solar energy and SOFC technology, Energy Conversion and Management, 79: 415-430. (ISI-Cited Publication)
 
2013

M.B. Ali, R. Saidur, M. Hasanuzzaman, T.A. Ward, 2013, Energy and Emission Analysis in the Malaysian Food Industries,Environmental Progress & Sustainable Energy 32 (3):777-783 (ISI/SCOPUS Cited Publication)

F. S. Javadi, B. Rismanchi , M. Sarraf, O. Afshar, R. Saidur, H.W. Ping, N.A. Rahim, Global Policy of Rural Electrification, Renewable and Sustainable Energy Reviews, 19, (2013) pp. 402-416 (ISI/SCOPUS Cited Publication)

Rahman, M.M, Parvin S, Hasanuzzaman M, Saidur R, Rahim, N.A, Effect of heat generating body on mixed convection flow in a ventilated cavity, Heat Transfer Engineering, 34(15):1249-1261, 2013 (ISI/SCOPUS Cited Publication)

W.Y. Low, J.A. Aziz, N.R.N. Idris, R. Saidur, Electrical Model to Predict Current-Voltage Behaviours of Lithium Ferro Phosphate Batteries using a Transient Response Correction Method, Journal of Power Sources, (2013), 221C, pp. 201-209 (ISI/SCOPUS Cited Publication)

N.A.Madlool, R. Saidur, N.A. Rahim, Thermodynamic analysis of waste heat recovery in the clinker cooling system of cement industry, Energy Education Science and Technology Part A: Energy Science and Research 2013 Volume (issues) 30(2): 759-774. (ISI/SCOPUS Cited Publication)

I.M. Mahbubul, S.A. Fadhilah, R. Saidur, K.Y. Leong, and M.A. Amalina, Thermophysical properties and heat transfer performance of Al2O3/R-134a nanorefrigerants, International Journal of Heat and Mass Transfer, 57 (1), (2013) 100 108. (ISI/SCOPUS Cited Publication)

M.R. Anisur, M.H. Mahfuz, M.A.Kibria, R.Saidur, I.H.S.C. Metselaar, T.M.I. Mahlia, Curbing global warming with phase change materials for energy storage, Renewable and Sustainable Energy Reviews, 18 (1), (2013) pp. 23-30 (ISI/SCOPUS Cited Publication)

Madlool, N. A., Saidur, R., Ward, T. A., Mohammed H. H., and Rahim, N. A., 2013, Thermodynamic analysis of waste preheater gas and dust bypass systems in a dry kiln cement production plant, (ISI/SCOPUS Cited Publication)

M. Kamalisarvestani, R. Saidur, S. Mekhilef, Performance, Materials and Coating Technologies of Thermochromic Thin Films on Smart Windows, Renewable and Sustainable Energy Reviews, 26, (2013) pp. 353-364 (ISI/SCOPUS Cited Publication)

Mahbubul, I.M.; Kamyar, A.; Saidur, R.; Amalina, M.A. Migration properties of TiO2 nanoparticles during the pool boiling of nanorefrigerants, Industrial & Engineering Chemistry Research, Volume 52, Issue 17, 1 May 2013, Pages 6032-6038. (ISI/SCOPUS Cited Publication)

Z. Said, M.H. Sajid, R. Saidur, M. Kamalisarvestani, N.A Rahim, Radiative properties of nanofluids, International Communications in Heat and Mass Transfer, 46 (2013) pp. 74-84. (ISI-Cited Publication)

Ferdous Ahmed, Abul Quasem Al Amin, Md. Hasanuzzaman and R. Saidur, Alternative Energy Resources in Bangladesh: A Review and Future Prospect, Renewable and Sustainable Energy Reviews, 25 (2013) 698 707. (ISI/SCOPUS Cited Publication)

M. Sarraf, B. Rismanchi, R. Saidur, H.W. Ping, N.A. Rahim, Ghazal, Renewable Energy Policies for Sustainable Development in Cambodia, Renewable and Sustainable Energy Reviews, 22 (2013) pp. 223-229 (ISI/SCOPUS Cited Publication)

N.A Madlool,, R. Saidur, N.A. Rahim, M. Kamalisarvestani, An overview of energy savings measures for cement industries, Renewable and Sustainable Energy Reviews, 19, (2013) pp. 18-29 (ISI/SCOPUS Cited Publication)

Mekhilef S, Faramarzi S.Z, Saidur R, The application of solar technologies for sustainable development of agricultural sector, Renewable and Sustainable Energy Reviews, 18 (1) (2013) pp. 583-594. (ISI/SCOPUS Cited Publication)

Y.S. Mohammed, A.S.Mokhtar, N.Bashir, R.Saidur, An overview of agricultural biomass for decentralized rural energy in Ghana, Renewable and Sustainable Energy Reviews, 20 (2013) 15 22. (ISI/SCOPUS Cited Publication)

M.R. Sohel, R. Saidur, M.F.M. Sabri, M. Kamalisarvestani, M.M. Elias, Ali Ijam, Investigating the Heat Transfer Performance and Thermophysical Properties of Nanofluids in a Circular Micro-channel, International Communication in Heat and Mass Transfer, 42, (2013) pp. 75-81. (ISI/SCOPUS Cited Publication)

H. Borhanazad, S. Mekhilef, R. Saidur, G. Boroumandjazi, Potential application of renewable energy for rural electrification in Malaysia, Renewable Energy 59 (2013) 210-219. (ISI/SCOPUS Cited Publication)

K.R. Ullah, R. Saidur , H.W. Ping , R.K. Akikur , N.H. Shuvo, A Review on Solar Thermal Refrigeration and Cooling Methods, Renewable and Sustainable Energy Reviews, 24 (2013) pp. 499-513 (ISI/SCOPUS Cited Publication)

K.R. Ullah, R. Saidur , H.W. Ping , R.K. Akikur , N.H. Shuvo, A Review on Solar Thermal Refrigeration and Cooling Methods, Renewable and Sustainable Energy Reviews, 24 (2013) pp. 499-513 (ISI/SCOPUS Cited Publication)

Ali Wadi, A., Saidur, R., Ward, T. A. and Rahim, N. A., 2013, Technical and Economic Analysis of Renewable Energy Powered Stand-alone Pole Street Lights for Remote Area, Journal of Environmental Progress (ISI/SCOPUS Cited Publication)

N.A. Madlool, R. Saidur, N.A. Rahim, M. Kamalisarvestani, An overview of energy savings measures for cement industries, Renewable and Sustainable Energy Reviews, Volume 19, March 2013, Pages 18-29 (ISI-Cited Publication)

A.E. Atabani, R. Saidur, S. Mekhilef, A.S. Silitonga, Energy Economical and Environmental Analysis of Industrial Boilers using Economizers, International Journal of Energy Engineering (IJEE) Feb. 2013, Vol. 3 Iss. 1, PP. 33-38 (Non-ISI/Non-SCOPUS Cited Publication)

R.K. Akikur, R.Saidur, H.W.Ping, K.R.Ullah, "Comparative study of stand-alone and hybrid solar energy systems suitable for off-grid rural electrification: A Review", Renewable and Sustainable Energy Reviews 27(2013)738 752 (ISI-Cited Publication)

M.R. Sohel, R. Saidur, N.H Hassan, M.M. Elias, S.S. Khaleduzzaman, I.M. Mahbubul, Analysis of entropy generation using nanofluid flow through circular microchannel and minichannel heat sink, International Communications in Heat and Mass Transfer, 46, (2013) pp. 85-91. (ISI/SCOPUS Cited Publication)

M.A. Khairul , R. Saidur, M.M. Rahman, Altab Hossain, M.A. Alim, Z. Abdin, Heat Transfer and Thermodynamic Analyses of a Helically Coiled Heat Exchanger Using Different Types of Nanofluids, International Journal of Heat and Mass Transfer, 67 (2013) pp. 398-403 (ISI/SCOPUS Cited Publication)

M.A. Alim , Z. Abdin, R. Saidur, A. Hepbasli, M.A. Khairul, , N.A. Rahim. Analyses of Entropy Generation and Pressure Drop for a Conventional Flat Plate Solar Collector Using Different Types of Metal Oxide Nanofluids, Energy and Buildings 66 (2013) 289 296 (ISI/SCOPUS Cited Publication)

M.M. Rahman, Hakan F. top, R. Saidur, S. Mekhilef and Khaled Al-Salem, Finite element solution of MHD mixed convection in a channel with a fully or partially heated cavity, Computers and Fluids, 53 (2013), 53-64. (ISI/SCOPUS Cited Publication)

M. Faizal, R. Saidur, S.Mekhilef, M. A. Alim, "Energy, Economic and Environmental Analysis of Metal Oxides Nanofluid for Flat-Plate Solar Collector, Energy Conversion and Management, 76 (2013) pp. 162-168 (ISI/SCOPUS Cited Publication)

Z. Abdin, M.A. Alim, R. Saidur, M.R. Islam, Rashmi.W, S. Mekhilef, A. Wadi, solar energy harvesting with the application of nanotechnology, Renewable & Sustainable Energy Reviews, 26 (2013), 837-852. (ISI/SCOPUS Cited Publication)

G. BoroumandJazi, B. Rismanchi, R. Saidur, A review on exergy analysis of industrial sector, Renewable and Sustainable Energy Reviews, 27 (2013) pp. 198-203 (ISI/SCOPUS Cited Publication)

S.M.A.Rahman, R. Saidur, M.N.A. Hawlader, An economic optimization of evaporator and air collector area in a solar assisted heat pump drying system, Energy Conversion and Management, 76 (2013) pp. 377-384 (ISI/SCOPUS Cited Publication)

I.M. Mahbubul, R. Saidur and M.A. Amalina, Influence of particle concentrations and temperatures on thermal conductivity and viscosity of Al2O3/R141b nanorefrigerants, International Communications in Heat and Mass Transfer, Accepted, 43 (2013), pp. 100-104. (ISI/SCOPUS Cited Publication)

F.S. Javadi, R. Saidur, M. Kamalisarvestani, Investigating performance improvement of solar collectors by using nanofluids, Renewable and Sustainable Energy Reviews, 28 (2013) pp. 232-245 (ISI/SCOPUS Cited Publication)

A. Kamyar, K.S. Ong, R.Saidur, Effects of nanofluids on the heat transfer characteristics of a two-phase closed thermosyphon, International Journal of Heat and Mass Transfer, 65, (2013) pp. 610-618 (ISI/SCOPUS Cited Publication)

F. S. Javadi , S. Sadeghipour, R. Saidur, G. BoroumandJazi, B. Rahmati, M. M. Elias, M. R. Sohel, The effects of nanofluid on thermophysical properties and heat transfer characteristics of a plate heat exchanger, International Communications in Heat and Mass Transfer, 44 (2013) pp. 58-63 (ISI/SCOPUS Cited Publication)

Z. Said, M.H. Sajid, M.A. Alim, R. Saidur, N.A. Rahim. 2013. Experimental investigation of the thermophysical properties of AL203 nanofluid and its effect on a flat plate solar collector. International Communication in Heat & Mass Transfer : 99-107. (ISI-Cited Publication)

K.R. Ullah a,n, R.Saidur a,b, H.W.Ping a, R.K.Akikur a, N.H.Shuvo 2013, A review of solar thermal refrigeration and cooling methods, Renewable and Sustainable Energy Reviews, pp. 499-513. (ISI/SCOPUS Cited Publication)

M.R. Anisur, M.A. Kibria, M.H. Mahfuz, R.Saidur, I.H.S.C. Metselaar, Analysis of a thermal energy storage System for air cooling-heating application through cylindrical tube, Energy Conversion and Management, 76 (2013) pp. 732-737 (ISI/SCOPUS Cited Publication)

Z. Said, M.H. Sajid, M.A. Alim, R. Saidur, N.A. Rahim, Experimental investigation of the thermophysical properties of Al2O3 nanofluids and its effect on a flat plate solar collector, International communications in Heat and Mass Transfer, 48, 99-107. (ISI/SCOPUS Cited Publication)

G. BoroumandJazi, B. Rismanchi, R. Saidur, Technical Characteristic Analysis of Wind Energy Conversion Systems for Sustainable Development, Energy Conversion and Management, 69, (2013) pp. 87-94 (ISI/SCOPUS Cited Publication)

R.K. Akikur, R. Saidur, H.W. Ping, K.R. Ullah, Comparative study on stand-alone and hybrid solar energy globally suitable for off-grid rural electrification: A review, Renewable & Sustainable Energy Reviews, 27 (2013) pp. 738-752 (ISI/SCOPUS Cited Publication)

M.R. Islam, S. Mekhilef and R. Saidur, Progress and recent trends of wind energy technology: a review, Renewable and Sustainable Energy Reviews, 21, (2013) pp. 456-468 (ISI/SCOPUS Cited Publication)

M.M. Elias, M. Miqdad, I.M. Mahbubul, R. Saidur, M. Kamalisarvestani, M.R. Sohel, Arif Hepbasli, effect of nanopart cle shape on the heat transfer and thermodynam c performance of a shell and tube heat exchanger, International Communications in Heat and Mass Transfer, 44 (2013) pp. 93-99 (ISI/SCOPUS Cited Publication)

M.M. Elias, M. Miqdad, I.M. Mahbubul, R. Saidur, M. Kamalisarvestani, M.R. Sohel, Arif Hepbasli, effect of nanopart cle shape on the heat transfer and thermodynam c performance of a shell and tube heat exchanger, International Communications in Heat and Mass Transfer, 44 (2013) pp. 93-99 (ISI/SCOPUS Cited Publication)

F.S. Javadi, R. Saidur, Energetic, economic and environmental impacts of using nanorefrigerant in domestic refrigerators in Malaysia, Energy Conversion and Management, 73, (2013) pp. 335-339. (ISI/SCOPUS Cited Publication)

M. Rezaei, M.R. Anisur, M.H. Mahfuz, M.A.Kibria, R.Saidur, I.H.S.C. Metselaar, Performance and cost analysis of phase change materials with different melting temperatures in heating systems, Energy, 53, (2013) pp. 173-178 (ISI/SCOPUS Cited Publication)

B. Rismanchi, R. Saidur, H.H. Masjuki, T.M.I. Mahlia Modeling and simulation to determine the potential energy savings by implementing cold thermal energy storage system in office buildings, Energy Conversion and Management, Volume 75, November 2013, Pages 152- 161 (ISI/SCOPUS Cited Publication)

M.M. Rahman, R. Saidur, S. Mekhilef, M.B Uddin, A. Ahsan, Double diffusive Buoyancy induced flow in a triangular cavity with corrugated bottom wall: Effects of geometrical parameters, International Communications in Heat and Mass Transfer, 45, (2013) pp. 64-74. (ISI/SCOPUS Cited Publication)
 
2012

Hakan F. top, Rahman,M.M., Ahsan,A., Hasanuzzaman,M., Saidur,R., Khaled Al-Salem & Rahim,N.A. 2012. MHD natural convection in an enclosure from two semi-circular heaters on the bottom wall. International Journal of Heat and Mass Transfer 55(7-8):1844-1854 (ISI/SCOPUS Cited Publication)

M. M. Rahman, H.F. Oztop, N.A. Rahim, R. Saidur and K.A Salem, Computational Analysis of Mixed convection in a channel with a cavity heated from different sides, International Communications in Heat and Mass Transfer, 39 (1), (2012) pp. 78-84. (ISI/SCOPUS Cited Publication)

M.M.K. Bhuiya, J.U. Ahamed, M.S.U. Chowdhury, M.A.R. Sarkar, B. Salam, R. Saidur, H.H. Masjuki, M.A. Kalam, Heat Transfer Enhancement and development of co-relation for turbulent flow through a tube with triple helical inserts, International Communications in Heat and Mass Transfer, 39 (1) (2012) pp. 94-101. (ISI/SCOPUS Cited Publication)

Saidur R, BoroumandJazi G, Mekhilef S, Mohammed H. A, A review on exergy analysis of biomass based fuels, Renewable and Sustainable Energy Reviews, 16 (2), (2012), 1217-1222. (ISI/SCOPUS Cited Publication)

I. M. M. Ali, R. Saidur, Nanofluid as a Coolant for Electronic Devices (Cooling of Electronic Devices), Applied Thermal Engineering, 32C, 76-82. (ISI/SCOPUS Cited Publication)

S. Mekhilef, A. Safari, W.E.S. Mustaffa, R. Saidur, R. Omar, M.A.A. Younis, Solar energy in Malaysia: current state and prospects, Renewable and Sustainable Energy Reviews 16 (1), (2012) pp. 386-396. (ISI/SCOPUS Cited Publication)

R. Saidur, S. Mekhilef, M. B. Ali, A. Safari, Applications of variable speed drive (VSD) in electrical motors energy savings, Renewable and Sustainable Energy Reviews, 16 (1), (2012) pp. 543-550. (ISI/SCOPUS Cited Publication)

N.A Madlool, R. Saidur, N.A. Rahim, M.S. Hossian, An exergy analysis for cement industries: An overview, Renewable and Sustainable Energy Reviews, 16 (1), (2012) pp. 921-932 (ISI/SCOPUS Cited Publication)

Saidur R, BoroumandJazi G, Mekhlif, S, Jameel M, Exergy analysis of solar energy applications, Renewable and Sustainable Energy Reviews, 16 (1) (2012) pp. 350- 356. (ISI-Cited Publication)

Mekhilef S, Saidur R, A. Safari, Comparative study of different fuel cell technologies, Renewable and Sustainable Energy Reviews, 16 (1), (2012) pp. 981-989. (ISI/SCOPUS Cited Publication)

K.Y.Leong, R. Saidur, T.M.I Mahlia, Y.H.Yau, Modeling of shell and tube heat recovery exchanger operated with nanofluid based coolants. International Journal of Heat and Mass Transfer, 55 (4), (2012) pp. 808-816 (ISI/SCOPUS Cited Publication)

I. M. Mahbubul, R. Saidur, M. A. Amalina, Latest developments on the viscosity of nanofluids, International Journal of Heat and Mass Transfer, 55 (4), (2012) pp. 874-885 (ISI-Cited Publication)

Atabani, A. E., Saidur, R., Silitonga, A. S., & Mahlia, T. M. I. (2012) Energy economical and environmental analysis of industrial boilers using VSD. Vol. 110-116 (pp. 3223-3233). (SCOPUS-Cited Publication)

Rahman,M.M., Parvin,S., Rahim,N.A., Islam,M.R., Saidur,R. & Hasanuzzaman,M.2012. Effects of Reynolds and Prandtl number on Mixed Convection in a Ventilated Cavity with a Heat-Generating Solid Circular Block, Applied Mathematical Modelling, 36 (5): 2056-2066. (ISI/SCOPUS Cited Publication)

Kamyar,A., Saidur,R. & Hasanuzzaman, M. 2012. Application of Computational Fluid Dynamics (CFD) for Nanofluids. International Journal of Heat and Mass Transfer 55 (15-16): 4104-4115. (ISI/SCOPUS Cited Publication)

J. U. Ahamed, R Saidur, H. H. Masjuki and M.A. Sattar, Energy and thermodynamic performance of LPG as an alternative refrigerant to R-134a in a domestic refrigerator, Energy Education Science and Technology Part A: Energy Science and Research 2012 Volume (issues) 29(1): 597-610. (ISI-Cited Publication)

M. R. Islam, N. A. Rahim, K. H. Solangi and R. Saidur (2012). Assessing wind energy potentiality for selected sites in Malaysia, Energy Education Science and Technology Part A: Energy Science and Research 29(1): 611-626. (ISI-Cited Publication)

R Saidur, M. Hasanuzzaman and NA Rahim, Energy, economic and environmental analysis of the Malaysian industrial compressed-air systems, Clean Technology and Environmental Policy, 14(2), 2012, 195-210. (ISI/SCOPUS Cited Publication)

M. M. Rahman, M. M. Billah, N.A. Rahim, R. Saidur, M. Hasanuzzaman, Finite Element simulation of MHD mixed convection in a double lid-driven enclosure with a square heat generating block, ASME Journal of Heat Transfer, 2012, Vol. 134, 062501-062508. (ISI/SCOPUS Cited Publication)

Rahman, M.M.; Oztop, H F ; Abd Rahim, Nasrudin; Saidur, R.; Al-Salem, Khaled, Laminar mixed convection in inclined triangular enclosures filled with water based Cu nanofluid, Industrial & Engineering Chemistry Research, 2012, 51 (10), 4090−4100. (ISI/SCOPUS Cited Publication)

Mekhilef S, M. Kamali, Saidur R, effect of dust, humidity and air velocity on efficiency of photovoltaic cells, Renewable and Sustainable Energy Reviews 16 (5), (2012) pp. 2920-2925 (ISI/SCOPUS Cited Publication)

BoroumandJazi G, Saidur R, Rismanchi B, Mekhilef S, A review on the relation between the energy and exergy efficiency analysis and the technical characteristic of the renewable energy systems, Renewable and Sustainable Energy Reviews, 16 (5) (2012) pp. 3131-3135. (ISI/SCOPUS Cited Publication)

Majid A. Abdullah, A.H.M. Yatim, Chee Wei Tan, R. Saidur, A review of maximum power point tracking algorithms for wind energy systems, Renewable and Sustainable Energy Reviews, 16 (5), (2012) pp. 3220-3227 (ISI/SCOPUS Cited Publication)

K.Y.Leong, R.saidur, T.M.I.Mahlia,Y.H Yau, Performance Investigation of Nanofluids as Working Fluid in a Thermosyphon Air Preheater , International Communications in Heat and Mass Transfer. 39 (4), (2012) pp. 523-529. (ISI/SCOPUS Cited Publication)

R. Saidur, M.T. Sambandam, M. Hasanuzzaman, D. Devaraj, S. Rajakarunakaran, An analysis of actual energy savings in an Indian cement Industry through energy efficiency index, International Journal of Green Energy, Vol. 9 (8), 2012, pp. 829-840. (ISI/SCOPUS Cited Publication)

J.U. Ahamed, R Saidur, H. H. Masjuki and M.A. Sattar, Energy and thermodynamic performance of LPG as an alternative refrigerant to R-134a in a domestic refrigerator, Energy Education Science and Technology Part A: Energy Science and Research, 2012, 29(1): 597- 610. (ISI-Cited, Q1, IF = 9.33). (ISI-Cited Publication)

H. A. Mohammed, G. Bhaskaran, N.H. Shuaib, H. I. Abu-Mulaweh, R. Saidur, Thermal and Hydrodynamics Performance Analysis of Circular Microchannel Heat Exchanger Utilizing Nanofluids, International Journal of Numerical Methods for Heat and Fluid Flow, Volume. 22 (2012), issue. 7. pp. 907-927. (ISI/SCOPUS Cited Publication)

M. Hasanuzzaman, Hakan F. top, M.M. Rahman, N.A. Rahim, R. Saidur, Y. Varol, Magnetohydrodynamic natural convection in trapezoidal cavities, International Communications of Heat and Mass Transfer, 39 (9)(2012) pp. 1384-1394. (ISI/SCOPUS Cited Publication)

J. U. Ahamed, Saidur R, H. H. Masjuki and M. A. Sattar, analyses of energy, exergy and sustainable development of vapor compression refrigeration system using hydrocarbon, International Journal of Green Energy, Vol. 9, issue. 7, pp. 702-717. (ISI/SCOPUS Cited Publication)

M. M. K. Bhuiya, J. U. Ahamed, M. A. R.. Sarkar, B. Salam, R. Saidur, A. S. M. Sayem, M. A. Kalam, Heat transfer and pressure drop characteristics in turbulent flow through a tube, Experimental Heat Transfer, Vol. 25, issue 4, pp. 301-322. (ISI/SCOPUS Cited Publication)

Ramin Solouki Bonab, and Saidur Rahman, Clean Automotive Technology: Hydraulic Hybrid Vehicles (HHVs), Applied Mechanics and Materials Vol. 165 (2012) pp 12-15 (SCOPUS-Cited Publication)

J U Ahamed, N.A. Madlool, R Saidur, M. I Shahinuddin, A. Kamyar, H H Masjuki, Assessment of energy and exergy efficiencies of a grate clinker cooling system through the optimization of its operational parameters, Energy, 46 (1), (2012) pp. 664-674 (ISI/SCOPUS Cited Publication)

H. A. Mohammed, A. A. Al-aswadi, M. Z. Yusoff and R. Saidur, Buoyancy-Assisting Mixed Convective Flow Over Backward Facing Step In A Vertical Duct Using Nanofluids, Thermophysics and Aeromechanics, 2012, Volume 19, Number 1, Pages 33-52. (ISI/SCOPUS Cited Publication)

R. Saidur, T.C Meng, Z. Said, M. Hasanuzzaman, A. Kamyar, Evaluation of the effect of nano-fluids based absorbers on direct solar collector, International Journal of Heat and Mass Transfer, 55 (21-22) (2012) pp. 5899-5907. (ISI/SCOPUS Cited Publication)

R. Saidur, M.T. Sambandam, M. Hasanuzzaman, D. Devaraj, S. Rajakarunakaran, An energy flow analysis in a paper based industry, Clean Technologies and Environmental Policy, Volume 14, Issue 5 (2012), Page 905-916. (ISI/SCOPUS Cited Publication)

Rahman, M.M, Hasanuzzaman M, Saidur R, Rahim, N.A, Heat Transfer enhancement of nanofluids in a lid driven square enclosure, Numerical Heat Transfer-Part A, Vol. 62 (2012), Issue 12, pp. 973-991. (ISI/SCOPUS Cited Publication)

Rismanchi, B., Saidur, R., Masjuki, H.H., Mahlia, T.M.I.2012.Energetic, economic and environmental benefits of utilizing the ice thermal storage systems for office building applications. Energy and Buildings. 50 (2012) 347 354. (ISI/SCOPUS Cited Publication)

H. Fayaz, R. Saidur, N. Razali, F.S. Anuar, A.R. Saleman, M.R. Islam, An overview of hydrogen as a vehicle fuel, Renewable and Sustainable Energy Reviews, Volume 16, Issue 8, October 2012, Pages 5511-5528 (ISI/SCOPUS Cited Publication)

N.A. Rahim, R. Saidur, K.H. Solangi, M. Othman, N. Amin, survey of grid-connected photovoltaic inverters and related systems, Clean Technology and Environmental Policy, 2012, Volume 14, Number 4, Pages 521-533 (ISI/SCOPUS Cited Publication)

B. Rismanchi, R. Saidur, H.H. Masjuki, T.M.I. Mahlia, Thermodynamic Evaluation of Utilizing Different Ice Thermal Energy Storage Systems for Cooling Application in Office Buildings in Malaysia, Energy and Building, Volume 53, October 2012, Pages 117-126. (ISI/SCOPUS Cited Publication)

K.Y.Leong, R. Saidur, M. Khairulmaini, Z. Michael, A. Kamyar, Heat Transfer and Entropy Analysis of Three different types of Heat Exchangers Operated with Nanofluids, International Communication in Heat and Mass Transfer, 39 (6) (2012) pp. 838-843 (ISI/SCOPUS Cited Publication)

R. Saidur, M. Razaei, W. K. Muzammil, M. H. Hassan, S. Paria, M. Hasanuzzaman, Technologies to recover exhaust heat from internal combustion engines, Renewable and Sustainable Energy Reviews, 16 (8), (2012) pp. 5649-5659. (ISI/SCOPUS Cited Publication)

R. Saidur, O. Afshar, M. Hasanuzzaman, M. Jameel, A review of thermodynamics and heat transfer in solar refrigeration system, Renewable and Sustainable Energy Reviews, 16 (8), (2012) pp. 5639-5648. (ISI/SCOPUS Cited Publication)

Rahman, M.M., Parvin, S., Rahim, N.A., Hasanuzzaman, M., Saidur, R., Simulation of mixed convection heat transfer in a horizontal channel with an open cavity containing a heated hollow cylinder, Heat Transfer- Asian Research, 41 (4) , pp. 339-353. (SCOPUS-Cited Publication)

B. Rismanchi, R. Saidur, G. BoroumandJazi, S. Ahmed, Energy, Exergy and Environmental Analysis of Cold Thermal Energy Storage (CTES) Systems, Renewable and Sustainable Energy Reviews, 16 (8), (2012) pp. 5741- 5746 (ISI/SCOPUS Cited Publication)

M. Hasanuzzaman, N.A.Rahim, M.Hosenuzzaman, R. Saidur, I.M.Mahbubul, M.M.Rashid,Energy savings in the combustion based process heating in industrial sector: a review, Renewable and Sustainable Energy Reviews, 16 (7) (2012) 4527 4536. (ISI/SCOPUS Cited Publication)

M.M.K. Bhuiya, J.U. Ahamed, M.S.U. Chowdhury, M.A.R. Sarkar, B. Salam, R. Saidur, H.H. Masjuki, M.A. Kalam,(2012), Heat transfer enhancement and development of correlation for turbulent flow through a tube with triple helical tape inserts.International Communications in Heat and Mass Transfer, Volume 39, Issue 1,Pages 94-101 (ISI-Cited Publication)

RISMANCHI, B., SAIDUR, R., MASJUKI, H. H. & MAHLIA, T. M. I. 2012. Thermodynamic evaluation of utilizing different ice thermal energy storage systems for cooling application in office buildings in Malaysia. Energy and Buildings, 53:117-126. (ISI-Cited Publication)
 
2011

R. Saidur, Energy savings and emission reductions in industrial boilers, Thermal Science, 2011, Vol. 15, Issue 3, pp. 707-721 (ISI-Cited Publication)

H. A. Mohammed, G. Bhaskaran, N.H. Shuaib, R. Saidur, Numerical study of heat transfer enhancement of counter nanofluids flow in rectangular microchannel heat exchanger, Superlattices and Microstructures, 50 (2011) 215 233. (ISI/SCOPUS Cited Publication)

M.S. Hossain, R. Saidur, H. Fayaz, M.M Rahman, N. A. Rahim, M.R. Islam, Review on solar water heater collector and thermal energy performance of circulating pipe, Renewable and Sustainable Energy Reviews, 15 (8), (2011) pp. 3801-3812. (ISI/SCOPUS Cited Publication)

M. M. Rahman, R Saidur, NA Rahim, Conjugate effect of joule heating and magneto-hydrodynamic double-diffusive mixed convection in a horizontal channel with an open cavity, International Journal of Heat and Mass Transfer, Vol. 54, Issues 15-16, (2011) pp. 3201-3213 (ISI/SCOPUS Cited Publication)

S. Mekhilef, R. Saidur, A. Safari, W.E.S.B Mustaffa, Biomass energy in Malaysia: current state and prospects, Renewable and Sustainable Energy Reviews, 15 (7), (2011) pp. 3360-3370 (ISI/SCOPUS Cited Publication)

A Ghadimi, R. Saidur, H.S.C Metselaar, A Review of nanofluid stability properties and characterization in stationary conditions, International Journal of Heat and Mass Transfer, 54 (17-18), 2011, pp. 4051-4068 . (ISI/SCOPUS Cited Publication)

M.M. Billah, M.M. Rahman, Uddin M. Sharif, N.A. Rahim, R. Saidur, M. Hasanuzzaman, Numerical analysis of fluid flow due to mixed convection in a lid-driven cavity having a heated circular hollow cylinder, International Communications in Heat and Mass Transfer, 38 (8), (2011) pp. 1093-1103. (ISI/SCOPUS Cited Publication)

R. Saidur and TMI, Mahlia, Impacts of energy efficiency standard on motor energy savings and emission reductions, Clean Technology and Environmental Policy, Volume 13, Issue 1 (2011), Page 103-109. (ISI/SCOPUS Cited Publication)

M. M. Billah, M. M. Rahman, R. Saidur and M. Hasanuzzaman, Simulation of MHD Mixed Convection Heat Transfer Enhancement in a Double Lid-Driven Obstructed Enclosure, International Journal of Mechanical and Materials Engineering, 6(1), 2011, 18-30. (SCOPUS-Cited Publication)

H. A. Mohammed, Nur Irmawati Om, N.H. Shuaib, R. Saidur, Numerical Investigation of Combined Convective of Nanofluids flow in a Vertical Rectangular Duct considering radiation effects, Heat Transfer-Asian Research, 40 (5), 2011, pp. 448-463. (SCOPUS-Cited Publication)

J. U. Ahmed, R. Saidur, H. H. Masjuki, S. Mekhilef, M. B. Ali, and M. H. Furqon, An application of energy and exergy analysis in agricultural sector of Malaysia, Energy Policy, 39 (12), (2011) pp. 7922-7929 (ISI/SCOPUS Cited Publication)

R. Saidur, Energy savings and emission reductions in industrial boilers, Thermal Science, 2011, Vol. 15, Issue 3, pp. 705-719. (ISI/SCOPUS Cited Publication)

M. M. Rahman, N. A. Rahim, S. Saha, M. M. Billah, R. Saidur & A. Ahsan, Optimization of mixed convection in a lid driven enclosure with a heat generating circular body, Numerical Heat Transfer, Part A, Volume 60, Issue 7, October 2011, pages 629-650. (ISI-Cited Publication)

M.M. Rahman, Hakan F. top, R. Saidur, N.A. Rahim, Khaled Al-Salem, MHD mixed convection with joule heating effect in a lid-driven cavity with a heated semi-circular source using finite element technique, Numerical Heat Transfer, Part A, Volume 60, Issue 6, September 2011, pages 543-560. (ISI, Q2) (ISI/SCOPUS Cited Publication)

R. Saidur, E.T. Elcevvadi , S. Mekhilef, A. Safari, An overview of different distillation methods for small scale applications, Renewable and Sustainable Energy Reviews, 15 (9), (2011) pp. 4756-4764 (ISI/SCOPUS Cited Publication)

Ahamed, J. U., Saidur, R., Masjuki, H. H., Mekhilef, S., Ali, M. B., & Furqon, M. H. 2011. An application of energy and exergy analysis in agricultural sector of Malaysia. Energy Policy, 39(12): 7922-7929. (ISI-Cited Publication)

Ahamed J. U., Saidur R. & Masjuki H. H. 2011. A review on exergy analysis of vapor compression refrigeration system, Renewable and Sustainable Energy Reviews, 3(15): 1593-1600. (ISI-Cited Publication)

Hasanuzzaman M., Saidur R. & Masjuki, H. H., (2011), Effects of different variables on moisture transfer of household refrigerator-freezer, Energy Education Science and Technology Part A: Energy Science and Research, 27(2): pp. 401-418. (ISI-Cited Publication)

M. M. Rahman, M. M. Billah, N.A Rahim, N. Amin, R. Saidur and M. Hasanuzzaman. 2011. A numerical model for the simulation of double-diffusive natural convection in a right-angled triangular solar collector, International Journal of Renewable Energy Research 1(2):50-54 (Non-ISI/Non-SCOPUS Cited Publication)

J.U. Ahamed, R. Saidur, H.H. Masjuki1 and S. Mehjabin, Prospect of hydrocarbon uses based on exergy analysis in the vapor compression refrigeration system, International Journal of Renewable Energy Research (IJRER), Vol.1 (2011), No.1, 68-71 (Non-ISI/Non-SCOPUS Cited Publication)

R. Saidur and TMI, Mahlia, Impacts of energy efficiency standard on motor energy savings and emission reductions, Clean Technology and Environmental Policy, Volume 13, Issue 1 (2011), Page 103-109.(Q3) (ISI/SCOPUS Cited Publication)

R, Saidur, N.A. Rahim, K.H, Solangi and M.R Islam, environmental impact of wind energy, Renewable and Sustainable Energy Reviews, 15 (5) (2011) pp. 2423-2430 (ISI/SCOPUS Cited Publication)

Saidur R, and Lai Y. K, Nanotechnology in vehicle s weight reduction and associated energy savings, Energy Education Science and Technology Part A: Energy Science and Research, 2011 Volume (Issue) 26(2): 87-101 (ISI-Cited Publication)

M. M. Rahman, M. A. H. Mamun and R. Saidur, Analysis of magnatohydrodynamic mixed convection and joule heating in lid-driven cavity having a square block, Journal of the Chinese Institute of Engineers, Vol. 34, No. 5, July 2011, 585-595.(Q4) (ISI-Cited Publication)

R. Saidur, S. N. Kazi, M. M. Rahman,and H.A. Mohammed, A review on the performance of nanoparticles suspended with refrigerants and lubricating oils in refrigeration systems, Renewable and Sustainable Energy Reviews, 15 (1), 2011, pp. 310-323 (Q1) (ISI/SCOPUS Cited Publication)

M. Hasanuzzaman, N. A. Rahim, R. Saidur, S. N. Kazi, Energy Savings And Emissions Reductions For Rewinding And Replacement Of Industrial Motor, Energy,Vol. 36 (1), 2011. pp. 233-240. (Q1) (ISI/SCOPUS Cited Publication)

M. Hasanuzzaman, R. Saidur, H. H. Masjuki, Effects of different variables on moisture transfer of household refrigerator-freezer, Energy Education Science and Technology Part A: Energy Science and Research, 2011 Volume (Issue) 27(2): 401-418 (ISI-Cited Publication)

E.A. Abdelaziz, R. Saidur, S. Mekhilef, A review on energy saving strategies in industrial sector, Renewable and Sustainable Energy Reviews,15 (1), 2011, pp. 150-168.(Q1) (ISI/SCOPUS Cited Publication)

M. M. Rahman, S. Parvin and R. Saidur, Magnetohydrodynamic mixed convection in a horizontal channel with an open cavity, International Communications in Heat and Mass Transfer, 38 (2), (2011) pp. 184-193. (Q2) (ISI/SCOPUS Cited Publication)

R. Saidur, T. M. I. Mahlia, M. Hasanuzzaman, Developing energy performance standard,label and test procedures and impacts analysis for commercial chillers, Energy Education Science and Technology Part A: Energy Science and Research, 2011, Volume (Issue) 27 (1): 175-190 (ISI-Cited Publication)

T. M. I. Mahlia, R. Saidur, P.A.A. Yanti, H. H. Masjuki, Role of energy guide labels in consumers purchase decision for household electrical appliances, Energy Education Science and Technology Part A: Energy Science and Research, 2011, Volume (Issue) 27(1): 95- 104 (ISI-Cited Publication)

M. Mohammadnejad, M. Ghazvini, F. S. Javadi, R. Saidur, Estimating the exergy efficiency of engine using nanolubricants Energy Education Science and Technology Part A: Energy Science and Research, 2011 Volume (Issue) 27(2): 447-454 (ISI-Cited Publication)

M. R. Islam, R Saidur, and NA Rahim, Assessment of wind energy potentiality at Kudat and Labuan, Malaysia using Weibull distribution function, Energy 36 (2), (2011) pp. 985-992.(Q1) (ISI/SCOPUS Cited Publication)

G. Bhaskaran, H. A. Mohammed, N.H. Shuaib, R. Saidur, Heat Transfer and Fluid Flow Characteristics in Microchannels Heat Exchanger Using Nanofluids: A Review, Renewable and Sustainable Energy Reviews, 15 (3), 2011, pp. 1502-1512.(Q1) (ISI/SCOPUS Cited Publication)

R. Saidur and K.Y. Leong, Application and Challenges of nanotechnology, Renewable and Sustainable Energy Reviews,15 (3), 2011. pp. 1646-1668.(Q1) (ISI/SCOPUS Cited Publication)

J. U. Ahamed, R. Saidur and H. H. Masjuki, A review on exergy analysis of vapor compression refrigeration system, Renewable and Sustainable Energy Reviews, 15 (3), 2011, pp. 1593-1600. (ISI/SCOPUS Cited Publication)

S. Mekhilef, S. Siga R. Saidur, , A review on palm oil biodiesel as a source of renewable fuel, Renewable and Sustainable Energy Reviews,Elsevier, 15 (4), 2011, pp. 1937- 1949.(Q1) (ISI-Cited Publication)

S. Mekhilef, R. Saidur, A. Safari, A review on solar energy use in industries, Renewable and Sustainable Energy Reviews, Elsevier, 2011, 15 (4), pp. 1777-1790 (Q1) (ISI-Cited Publication)

M. Hasanuzzaman, R. Saidur, N. A. Rahim, Energy, exergy and economic analysis of an annealing furnace, International Journal of Physical Sciences, 6 (6), 2011, 1257-1266. (ISI/SCOPUS Cited Publication)

K.H. Solangi, M.R. Islam, R. Saidur, N.A. Rahim, H. Fayaz, A review on global solar energy policy, Renewable and Sustainable Energy Reviews, 15 (4), (2011) pp. 2149-2163).(Q1) (ISI/SCOPUS Cited Publication)

R. Saidur, N.A Madlool, M.S. Hossain, N.A. Rahim, A critical review on energy use and savings in the cement industries, Renewable and Sustainable Energy Reviews, 15 (4), (2011) pp. 2042-2060.(Q1) (ISI/SCOPUS Cited Publication)

R. Saidur, A.E. Atabani, S. Mekhilef, A review on electrical and thermal energy for industries, Renewable and Sustainable Energy Reviews, 15 (4), (2011) pp. 2073-2086.(Q1) (ISI/SCOPUS Cited Publication)

T.M.I. Mahlia, B.N. Taufiq, K.P. Ong, R. Saidur, A. Syuhada, Exergy analysis for day lighting, electric lighting and space cooling systems for a room space in a tropical climate, Energy & Buildings 43 (7), (2011) pp. 1675-1683 (Q1). (ISI/SCOPUS Cited Publication)

R. Saidur, M.S. Hossain, M.R. Islam and H. Fayaz, A review on kiln system modeling, Renewable and Sustainable Energy Reviews, 15 (5), 2011, pp. 2487- 2500. Q1) (ISI/SCOPUS Cited Publication)

M.B Ali, R. Saidur, M.S Hossain, A review on emission analysis in cement industries, Renewable and Sustainable Energy Reviews, 15 (4), (2011) pp. 2252-2261. (ISI/SCOPUS Cited Publication)

R. Saidur, E.A. Abdelaziz, A. Demirbas, M.S. Hossain, A review on biomass as a fuel for boilers, Renewable and Sustainable Energy Reviews, 15 (2011) pp. 2262-2289 (ISI/SCOPUS Cited Publication)

H. A. Mohammed, A. A. Al-aswadi, N. H. Shuaib, R. Saidur, Convective Heat Transfer And Fluid Flow Study Over A Step Using Nanofluids: A Review, Renewable and Sustainable Energy Reviews, 15 (6), (2011) pp. 2921-2939 (Q1) (ISI/SCOPUS Cited Publication)
 
2010

M.M. Hasan, A.S.M.A. Haseeb, H.H. Masjuki, R. Saidur , M. Hamdi, Influence of substrate temperatures on structural, morphological and optical properties of RF- sputtered anatase TiO2 films, The Arabian Journal for Science and Engineering, Vol. 35, No. 1C, 2010, Pages 147-156.(Q4) (ISI/SCOPUS Cited Publication)

R Saidur, JU Ahmed, HH Masjuki, Energy, exergy and economic analysis for industrial boilers for Malaysia, Energy Policy, 38 (5), (2010) pp. 2188-2197 (Q2) (ISI/SCOPUS Cited Publication)

R Saidur, and S Mekhilef, Energy use, energy savings and emission analysis in the Malaysian rubber producing industries, Applied Energy, 87 (8) (2010) pp. 2746-2758.(Q1) (ISI/SCOPUS Cited Publication)

R Saidur, Energy, economics and environmental analysis for chillers in office buildings, Energy Education Science and Technology Part A: Energy Science and Research, 2010, Vol. 25, Issue 1, pp. 1-16. (ISI-Cited Publication)

R Saidur, NA Rahim and M. Hasanuzzaman, A review on compressed air energy use and energy savings, Renewable and Sustainable Energy Reviews, Vol. 14 (4), 2010, pp. 1135-53.(Q1) (ISI/SCOPUS Cited Publication)

R. Saidur, and TMI Mahlia, Energy, economic and environmental benefits of using high efficiency motors to replace standard motors for the Malaysian industries, Energy Policy, 38 (8), (2010) pp. 4617- 4625.(Q2) (ISI/SCOPUS Cited Publication)

R. Saidur, A review on electrical motors energy use and energy savings, Renewable and Sustainable Energy Review, Vol. 14 (3),(2010) pp. 877-898.(Q1) (ISI/SCOPUS Cited Publication)

M.I. Jahirul, H.H. Masjuki, R Saidur, M.A. Kalam, M.H. Jayed, M.A. Wazed, Comparative Engine performance and Emission Analysis of CNG and Gasoline in a Retrofitted Car Engine, Applied Thermal Engineering, Vol. 30 Issues, 14-15, pp. 2219-2226.(Q1) (ISI/SCOPUS Cited Publication)

R. Saidur, E. A. Abdelaziz, M. Hasanuzzaman, and M. A. H. Mamun, a study of energy efficiency, economic and environmental benefits of a cooling tower, International Journal of Mechanical and Materials Engineering (IJMME), Vol. 5 (2010), No. 1, 87-94. (SCOPUS-Cited Publication)

M. A. H. Mamun, T. R. Tanim, M. M. Rahman, R. Saidur and Shuichi Nagata, mixed convection analysis in trapezoidal cavity with a moving lid, International Journal of Mechanical and Materials Engineering (IJMME), Vol. 5 (2010), No. 1, 18-28. (SCOPUS-Cited Publication)

M.M. Hasan, A.S.M.A. Haseeb, R. Saidur, H.H. Masjuki, M. Hamdi, Influence of substrate and annealing temperatures on optical properties of RF-sputtered TiO2 thin films, Optical Materials, Vol. 32 (6), 2010, pages 690-695.(Q2) (ISI/SCOPUS Cited Publication)

T.M.I. Mahlia, and R. Saidur, A review on test procedure, energy efficiency standards and energy labels for room air conditioners and refrigerator- freezers, Renewable and Sustainable Energy Reviews,14 (7), 2010, pp. 1888-1900 (Q1) (ISI/SCOPUS Cited Publication)

R, Saidur, M.R Islam, N.A. Rahim, and K.H, Solangi, A review on global wind energy policy, Renewable and Sustainable Energy Reviews, 2010, 14 (7), 2010, pp. 1744-1762.(Q1) (ISI/SCOPUS Cited Publication)

R. Saidur, Y. K. Lai, Parasitic energy savings in engines using nanolubricants, Energy Education Science and Technology Part A: Energy Science and Research 2010 Volume(issue) 26(1): 61-74. (ISI-Cited Publication)

T. M. I. Mahlia, R. Saidur, M. Husnawan, H. H. Masjuki, M. A. Kalam, An approach to estimate the life- cycle cost of energy efficiency improvement of room air conditioners, Energy Education Science and Technology Part A: Energy Science and Research 2010 Volume (issue) 26(1): 1-11 (ISI-Cited Publication)

M. A. H. Mamun, M. M. Rahman, M.M Billah and R. Saidur, A numerical study on the effect of a heated hollow cylinder on mixed convection in a ventilated cavity, International Communication in Heat and Mass Transfer, 37 (9), (2010) pp. 1326-1334.(Q2) (ISI/SCOPUS Cited Publication)

J. U. Ahamed, M. M. K. Bhuiya, R. Saidur, H. H. Masjuki, M. A. R. Sarkar, A. S. M. Sayem and M. Islam, Forced convection heat transfer performance of porous twisted tape insert, Engineering e-Transaction, Vol. 5, No. 2, December 2010, pp 67-79 (Non-ISI/Non-SCOPUS Cited Publication)

R. Saidur, M. Hasanuzzaman and N.A. Rahim, Energy Use, Energy Savings and Environmental Analysis of Industrial Boilers and Compressors, Int. J. Thermal & Environmental Engineering,Volume 1, No. 1 (2010) pp. 29-36. (Non-ISI/Non-SCOPUS Cited Publication)

M. A. H. Mamun, T. R. Tanim, M. M. Rahman, R. Saidur and Shuichi Nagata, mixed convection analysis in trapezoidal cavity with a moving lid, International Journal of Mechanical and Materials Engineering (IJMME), Vol. 5 (2010), No. 1, 18-28. (SCOPUS-Cited Publication)

M.M. Hasan, A.S.M.A. Haseeb, H.H. Masjuki and R. Saidur , Adhesion And Wear Behavior Of Nanostructured Titanium Oxide Thin Films, International Journal of Mechanical and Materials Engineering (IJMME), Vol. 5 (2010), No. 1, 5-10. (SCOPUS-Cited Publication)

R. Saidur, M. Hasanuzzaman, S. Yogeswaran, MS Hossain, HA Mohammed, A End use energy analysis in a Malaysian public hospital, Energy, Energy 35 (12), (2010) pp. 4779-4784.(Q1) (ISI/SCOPUS Cited Publication)

K.Y.Leong, R. Saidur, S. N. Kazi and A.H. Mamun, Performance investigation of an automotive car radiator operated with nanofluid based coolants, Applied Thermal Engineering, Vol. 30, Issues, 17-18, (2010) pp. 2685-2692.(Q1) (ISI/SCOPUS Cited Publication)

H.A. Mohammed, Antonio Campo, R. Saidur, Experimental study of forced and free convective heat transfer in the thermal entry region of horizontal concentric annuli, International Communications in Heat and Mass Transfer, 37 (7), 2010, pp. 739-747 (Q2) (ISI/SCOPUS Cited Publication)

T.M.I. Mahlia, R. Saidur, L. A. Memon, N.W.M. Zulkifli, H.H. Masjuki, A review on fuel economy standard for motor vehicles with the implementation possibilities in Malaysia, Renewable and Sustainable Energy Reviews, 14 (9), 2010, pp. 3092-3099 (Q1) (ISI/SCOPUS Cited Publication)

M. M. Rahman, M. A. H. Mamun, M. M. Billah, R. Saidur and S. Nagata, Natural Convection Flow in a Square Cavity with Internal Heat generation and a Flush Mounted Heater on a Side Wall, Journal of Naval Architecture and Marine Engineering, Accepted on 1st October, 2010. (Non-ISI/Non-SCOPUS Cited Publication)

M.M. Hasan, A.S.M.A. Haseeb, H.H. Masjuki. and R. Saidur, Adhesion And Wear Behavior Of Nanostructured Titanium Oxide Thin Films, International Journal of Mechanical and Materials Engineering (IJMME), Vol. 5 (2010), No. 1, 5-10. (SCOPUS-Cited Publication)

J. U. Ahamed, R. Saidur and H. H. Masjuki, 2010. Thermodynamic performance analysis of R-600 and R-600a as refrigerant. Engineering e-Transaction, 2010, Vol. 5. No.1. pp.11-18. (SCOPUS-Cited Publication)

M. R. Islam, R. Saidur, N. A. Rahim and K. H. Solangi (2010). Usage of Solar Energy and Its Status in Malaysia, Engineering e-Transaction, 5(1), pp. 6-10 (Non-ISI/Non-SCOPUS Cited Publication)

A. M. Whaad, N. M. Adam, S.M. Sapuan and R. Saidur, Effect of selected shading devices on office room temperature, International Journal of Mechanical and Materials Engineering (IJMME), Vol. 5 (2010), No. 2, pp. 236-243. (SCOPUS-Cited Publication)

M. M. Rahman, M. M. Billah, M. A. H. Mamun, R. Saidur and M. Hasanuzzaman, Reynolds and prandtl numbers effects on mhd mixed convection in a lid-driven cavity along with joule heating and a centered heat conducting circular block, International Journal of Mechanical and Materials Engineering (IJMME), Vol. 5 (2010), No. 2, pp. 163-170. (SCOPUS-Cited Publication)

Jahirul M. I, Saidur R. and Masjuki H. H. Predictability of artificial neural network (ANN) in performance prediction of a retrofitted CNG engine, International Journal of Mechanical and Materials Engineering (IJMME), Vol. 5 (2010), No. 2, pp. 268-275. (SCOPUS-Cited Publication)

P. Gunnasegaran, H.A. Mohammed, N.H. Shuaib, R. Saidur, The effect of geometrical parameters on heat transfer characteristics of microchannels heat sink with different shapes, International Communications in Heat and Mass Transfer, Vol. 37, Issue, 8, 2010, pp. 1078-1086 .(Q2) (ISI/SCOPUS Cited Publication)

M.M. Hasan, A.S.M.A. Haseeb, R. Saidur, H.H. Masjuki & M. Hamdi. 2010. Influence of Substrate and Annealing Temperature on Optical properties of RF-sputtered TiO2. Optical Materials 32(6):690-695. DOI:10.1016/j.optmat.2009.07.011. (ISI-Cited Publication)

M.M. Hasan, A.S.M.A. Haseeb, R. Saidur, H.H. Masjuki (2010), Adhision and wear behavior of non-structured titanium oxide thin flims, International Journal of Mechanical and Materials Engineering(IJMME), 5(1), pp. 5-10. (SCOPUS-Cited Publication)

J. U. Ahamed, M. M. K. Bhuiya, R. Saidur, H. H. Masjuki, M. A. R. Sarkar, A. S. M. Sayem and M. Islam (2010), Forced convection heat transfer performance of porous twisted tape insert, Engineering e-Transaction, Vol. 5, No. 2, pp 67-79. (Non-ISI/Non-SCOPUS Cited Publication)

R. Saidur n, J.U. Ahamed, H.H. Masjuki.(2010).Energy, exergy and economic analysis of industrial boilers, Energy Policy, 38(5):2188-2197. (ISI/SCOPUS Cited Publication)

M.M. Hasan, A.S.M.A. Haseeb, R. Saidur ,H.H. Masjuki & M. Hamdi. 2010. Influence of Substrate and Annealing Temperatures on Optical Properties of RF-sputtered TiO2 Thin Films. Optical Materials 32(6):690-695. (ISI/SCOPUS Cited Publication)

Jahirul, M. I., Masjuki, H. H., Saidur, R., Kalam, M. A., Jayed, M. H. & Wazed, M. A.(2010) Comparative engine performance and emission analysis of CNG and gasoline in a retrofitted car engine. Applied Thermal Engineering, 30(14-15), 2219-2226. (ISI-Cited Publication)

Mahlia, T. M. I., Saidur, R., Husnawan, M., Masjuki, H. H. & Kalam, M. A. (2010). An approach to estimate the life-cycle cost of energy efficiency improvement of room air conditioners. Energy Education Science and Technology Part a-Energy Science and Research, 26(1):1-11. (ISI/SCOPUS Cited Publication)
 
2009

Saidur R, Rahim N.A, Masjuki H.H, Mekhilef S, Ping H.W. and Zamaluddin M.F, end use energy analysis in the Malaysian industrial sector, Energy, Volume 34, Issue 2, February 2009, Pages 153-158.(Q1) (ISI/SCOPUS Cited Publication)

Jahirul MI, Saidur R, Masjuki HH, Rashid MM and Kalam MA, Application of artificial neural networks (ANN) in forecasting performance of a dual fuel internal combustion engine. The HKIE Transaction, HKIE Transaction, Vol. 16, No. 1, 2009, pp. 14-20. (SCOPUS-Cited Publication)

Saidur R, Sattar MA, Masjuki H.H, Greenhouse gas emissions from refrigeration equipment, Energy and Environment, Vol. 20, No. 4, 2009, pp 533-551. (SCOPUS-Cited Publication)

R Saidur, N.A Rahim, and S Mekhilef, H.H Masjuki, H.W Ping, Energy and emission analysis for industrial motors in Malaysia, Energy Policy, 2009 Vol. 37, 3650 3658.(Q2) (ISI-Cited Publication)

M. Hasanuzzaman, R Saidur, HH Masjuki, Effects of variables on heat transfer, energy losses and energy consumption of household refrigerator-freezer during the closed door condition, Energy, Volume 34, Issue 2, February 2009, Pages 196-198 (Q1) (ISI/SCOPUS Cited Publication)

R Saidur, Energy consumption, energy savings and emission analysis in Malaysian office buildings, Energy Policy, 2009, 37, pp. 4104-4113(Q2) (ISI/SCOPUS Cited Publication)

Jayed, M.H., H.H. Masjuki, R. Saidur, M.A. Kalam, and M.I. Jahirul, Environmental aspects and challenges of oilseed produced biodiesel in Southeast Asia. Renewable and Sustainable Energy Reviews. Volume 13, Issue 9, December 2009, Pages 2452-2462 (Q1) (ISI/SCOPUS Cited Publication)

Saidur R, Hasanuzzaman. M, Hasan M.M. and Masjuki H.H, Overall Thermal Transfer Value of Residential Buildings in Malaysia, Journal of Applied Sciences, Vol. 9, Issue 11, pages 2130-2136, 2009. (SCOPUS-Cited Publication)

M.M. Hasan, A.S.M.A. Haseeb, R. Saidur , H.H. Masjuki, M. Hamdi, Synthesis and Annealing of Nanostructured TiO2 Films by Radio-frequency Magnetron Sputtering, Journal of applied sciences, Vol. 9, Issue 15, pages 2815-2821, 2009. (SCOPUS-Cited Publication)

R. Saidur, H. H. Masjuki,and M. Hasanuzzaman performance of an improved solar car ventilator, International Journal of Mechanical and Materials Engineering, Vol. 4, No. 1, pp. 24-34, 2009 (SCOPUS-Cited Publication)

M.R. Islam, R. Saidur, N.A. Rahim, K.H. Solangi; "Renewable Energy Research in Malaysia"; Engineering e-Transactions 4(2): 69-72, 2009. (SCOPUS-Cited Publication)

M. M. Rahman, M. A. H. Mamun, R Saidur, and Shuichi Nagata, Effect of a Heat Conducting Horizontal Circular Cylinder on MHD Mixed Convection in a Lid- Driven cavity along with Joule Heating, International Journal of Mechanical and Materials Engineering, Vol. 4. Issue. 3, 2009, pp. 256-265. (SCOPUS-Cited Publication)

M. I. Jahirul, R. Saidur and H. H. Masjuki, Application Of Artificial Neural Network To Predict Brake Specific Fuel Consumption Of Retrofitted CNG Engine, International Journal of Mechanical and Materials Engineering (IJMME), Vol. 4 (2009), No. 3, 249-255. (SCOPUS-Cited Publication)
 
2008

M. Hasanuzzaman, R Saidur, HH Masjuki, Investigation of Energy Consumption and Energy Savings of Refrigerator-freezer during Open and Closed Door Condition, Journal of applied Sciences, 8 (10): 1822- 1831, 2008. (SCOPUS-Cited Publication)

M. M. Hasan, A. S. M. A. Haseeb, R. Saidur, and H. H. Masjuki, Effects of Annealing Treatment on Optical Properties of Anatase TiO2 Thin Films, International Journal of Chemical and Biomolecular Engineering, World Academy of Science, Engineering and Technology (WASET), ISSN 2070-3783. Volume 1, Issue 2, 2008, Pages 93-97, (Non-ISI/Non-SCOPUS Cited Publication)

R. Saidur, H. H. Masjuki, M. Hasanuzzaman, G. S. Kai, Investigation of energy performance and usage behavior of domestic refrigerator freezer using clustering and segmentation, Journal of Applied Sciences, 8 (21), 2008, 3957-3962 (SCOPUS-Cited Publication)

H. Abdesselam, H. H. Masjuki, R. Saidur Rahman and M. Guellal, Performance study of water-to-water heat pump using non-Azeotropic refrigerant mixtures R407C, International Energy Journal, 2008, Vol. 9, Issue 4, pp. 267-274. (Non-ISI/Non-SCOPUS Cited Publication)

R. Saidur, M. I. Jahirul, M. Hasanuzzaman and H. H. Masjuki, Analysis of exhaust emissions of natural gas engine by using response surface methodology, Journal of Applied Sciences, 8(19), 2008, 3328-3339. (SCOPUS-Cited Publication)

R. Saidur, M.M. Hasan A.S.M.A. Haseeb and H.H. Masjuki, Energy-efficient Optical Coating for Flat Glass, Journal of applied Sciences, 8 (10): 1883- 1890, 2008. (SCOPUS-Cited Publication)

Saidur R, Masjuki HH, C.Y. Tan, J.K. Ooi, P.H. Yoon, Performance investigation of a solar powered thermoelectric refrigerator, International Journal of Mechanical and Materials Engineering, Vol. 3, Issue 1, 2008, pp. 7-16. (SCOPUS-Cited Publication)

R. Saidur and H.H. Masjuki, Application of Artificial Neural Networks to Investigate the Energy Performance of Household Refrigerator-freezers, Journal of applied sciences, 8 (11): 2124-2129, 2008. (SCOPUS-Cited Publication)

M. Hasanuzzaman, R Saidur, HH Masjuki, Moisture transfer and energy losses of household refrigerator- freezer during the closed door operation, International Journal of Mechanical and Materials Engineering, Vol. 3, Issue 1, 2008, pp. 30-37. (SCOPUS-Cited Publication)

Sattar MA, Saidur R, and Masjuki H.H, Pure Butane as Refrigerant in Domestic Refrigerator-Freezer, GMSARN International Journal, Vo. 2, No. 1, 2008, pp. 29-34. (Non-ISI/Non-SCOPUS Cited Publication)

Saidur R, and Masjuki HH, energy and associated emission analysis at the commercial building of Malaysia, International Journal of Mechanical and Materials Engineering, Vol. 3, Issue 1, 2008, pp. 90- 96. (SCOPUS-Cited Publication)

R. Saidur, H.H. Masjuki, M. Hasanuzzaman, T.M.I. Mahlia, C.Y. Tan, J.K. Ooi and P.H. Yoon, Performance investigation of a solar powered thermoelectric refrigerator, International Journal of Mechanical and Materials Engineering, 3(1), 2008, 7-16. (SCOPUS-Cited Publication)
 
2007

B.N. Taufiq, H.H. Masjuki, T.M.I. Mahlia, R. Saidur, M.S. Faizul, E. Niza Mohamad, Second law analysis for optimal thermal design of radial fin geometry by convection, Applied Thermal Engineering, Elsevier Science Ltd, U.K., Applied Thermal Engineering, 27 (2007) 1363 1370 (IF 0.777). (ISI/SCOPUS Cited Publication)

Saidur R, Hasanuzzaman M., Sattar MA, Masjuki H.H, Irfan AB, and AKM Mohiuddin, An analysis of energy use, energy intensity and emissions at the industrial sector of Malaysia, International Journal of Mechanical and Materials Engineering, 2007, Vol. 2, No. 1, pp. 84-92. (SCOPUS-Cited Publication)

Saidur R, Sattar MA, Masjuki HH, Abdesselam H, Shahruan BS, Energy and exergy Analysis in utility and commercial sectors of Malaysia, Energy Policy, 35 (3) (2007) pp. 1956 1966. (IF 0.958). 

B.N. Taufiq, H.H. Masjuki, T.M.I. Mahlia, M.S. Faizul, M.A. Amalina, R. Saidur, Exergy analysis of Evaporative Cooling for reducing energy use in a Malaysian building, Desalination, 209, (2007), pp. 238 243. (IF 0.955). (ISI-Cited Publication)

A.K.M. Mohiuddin, R Saidur, MA Sattar and Ataur Rahman, Comparison of drift eliminators characteristics in evaporative condenser and spray filled tower, International Energy Journal, Volume 8, Issue 3, September 2007, pp. 155-161. (SCOPUS-Cited Publication)

M.A.Sattar, R Saidur, and H.H Masjuki, Butane, Isobutane and their mixtures as alternative refrigerant to r-134a in domestic refrigerator, International Journal of Mechanical and Materials Engineering, 2007, Vol. 2, No. 2, pp. 154-160. (SCOPUS-Cited Publication)

Saidur R, Hasanuzzaman M., Sattar MA and Masjuki H.H, Open and Closed Door Moisture Transport and Corresponding Energy Consumption in Household Refrigerator, Journal of energy and Environment, Vol. 6, 2007, pp. 18-27. (Non-ISI/Non-SCOPUS Cited Publication)

Jahirul I, Saidur R, Masjuki H.H, and Kalam MA. Environmental effects of conversion of petroleum fuel-based motor cars to natural gas vehicles (NGVs) International Journal of Mechanical and Materials Engineering, 2007, Vol. 2, No. 2, pp. 130-138. (SCOPUS-Cited Publication)

M. A. Sattar, R. Saidur, H. H. Masjuki, Performance Investigation of Domestic Refrigerator Using Pure Hydrocarbons and Blends of Hydrocarbons as Refrigerants, International Journal of Mechanical Systems Science and Engineering Volume 1 Number 1, 2007. pp 50-55. (SCOPUS-Cited Publication)

M.Hasanuzzaman, R. Saidur, M.Ali, H.H.Masjuki, Effect of variables on natural convective heat transfer through v-corrugated vertical plates, International Journal of Mechanical and Materials Engineering, 2007, Vol. 2, No. 2, pp.109-117 (SCOPUS-Cited Publication)

Saidur R, Jahirul I, Moutushi TZ, Imtiaz H and Masjuki H.H, Effect of partial substitution of diesel by natural gas on performance parameters of a four cylinder diesel engine, Proceedings of the Institution of Mechanical Engineers, Part A, Journal of Power and Energy, IMechE, UK, 2007, Volume 221, Number 1, January 2007, pp. 1-10. (IF 0.325). (ISI/SCOPUS Cited Publication)

Saidur R, Sattar MA, Masjuki HH, and Ahmed S, An estimation of the energy and exergy efficiencies for the energy resources consumption in the transportation sector in Malaysia, Energy Policy, 2007, Volume 35, Issue 8, August 2007, Pages 4018- 4026. (IF 1.927). (ISI/SCOPUS Cited Publication)

Saidur R, Masjuki HH and Jamaluddin M.Y, An application of energy and exergy analysis in residential sector of Malaysia, Energy Policy, 35 (2), (2007), pp. 1050 1063. (IF 1.927). (ISI/SCOPUS Cited Publication)

Saidur R, Masjuki H.H Jamaluddin M.Y, and Ahmed S, Energy and associated greenhouse gas emissions from household appliances in Malaysia, Energy Policy, 35 (3), (2007), pp. 1648 1657. (IF 1.927). (ISI/SCOPUS Cited Publication)
 
2006

Saidur, R., Abdul Khaliq, A.H. and Masjuki, H.H. `Analysis of energy and exergy use for process heating in the industrial sector of Malaysia', International Journal of Exergy, Inderscience publishers, UK, Vol. 3, No. 2, 2006, pp.119-149. (ISI/SCOPUS Cited Publication)

Saidur R, Masjuki H.H and Jamaluddin M.Y, A new approach to investigate the energy performance of a household refrigerator-freezer, International Energy Journal, AIT, Thailand, Vol. 7, No. 1, 2006 (March), pp. 13-23 

M.S Faizul, J Sabariah, R Shaifulazuar, and R Saidur, Microstructure and Mechanical Properties of Sintered Zirconia produced by Injection Molding Process, International Journal of Mechanical and Materials Engineering, 2006, Vol. 1, No. 2, pp. 95-99. 

H. Abdesselam , H.H. Masjuki, R. Saidur, and M. Guellal, Performance evaluation of environmentally Benign refrigerants in heat pumps I: Simulation study, International Journal of Mechanical and Materials Engineering, 2006, Vol. 1, No. 2, pp. 108-113. 

Saidur R, Masjuki H.H and Jamaluddin M.Y, and Yap F.C, Actual usage conditions, energy savings and associated emission reductions of washing machines, Transactions of Hong Kong Institution of Engineers, 2006, Vol. 13 (2), pp. 16-23. (SCOPUS-Cited Publication)

Saidur R, Masjuki H.H, Jamaluddin MY, and Tamjis MR, Degree day analysis for Malaysia, International Journal of Mechanical and Materials Engineering, 2006, Vol. 1, No. 1, pp. 28-34. 

Saidur R, Sattar MA, Izudin A, and Masjuki HH, Developing a comprehensive energy guide label for household appliances through consumers research survey, Journal of Energy and Environment (JEE), BUET, Dhaka, Bangladesh, Volume 5 (May), 2006, pp. 77-93. 

Saidur R, Masjuki H.H, and Jamaluddin M.Y, Actual usage conditions and energy consumption of refrigerator-freezers, International Energy Journal, AIT, Thailand, Vol. 7, No. 2, 2006, , pp. 103-124. (SCOPUS-Cited Publication)
 
2005

Saidur R and Masjuki HH, Different methods of grading or rating of refrigerator-freezers, Asian J. of Energy and environment, The joint Graduate School of energy and environment, King Mongkut s University of Technology, Thonburi, Thailand. Vol. 6, Issue 1, pp. 57-69, 2005. 

Saidur R, Masjuki H.H, and Mahlia TMI Labeling design Effort for household refrigerator-freezers in Malaysia , 2005, Energy policy, Volume 33, Issue 5, Pages 611-618. (ISI/SCOPUS Cited Publication)

T.M.I Mahlia, H.H. Masjuki, F.M.Taha, N.A. Rahim and. R. Saidur, 'Energy labeling for electric fans in Malaysia', Energy policy, Elsevier science, Volume 33, Issue 1, January 2005, Pages 63-68. 

Saidur R, Nizam MS, Masjuki H.H, Tamjis MR, and Iswadi J, Temperature performance and usage conditions of domestic refrigerator-freezers in Malaysia, Transactions of Hong Kong Institution of Engineers, Vol. 12, No. 2, (June), 2005, pp. 30-34. 

Saidur R, Chew W.C and Masjuki HH, Development and validation of refrigerator-freezers energy consumption model with the aid of RSM, Journal of energy and environment, JEE, BUET, Dhaka, Bangladesh, Vol. 4, May 2005, pp. 11-19. 

Saidur R, Jahirul I, Leong W.B, and Masjuki HH, Development and validation of emission model for a petrol engine using RSM, Journal of The Institution of Engineers, Malaysia, Vol. 66, No. 4, 2005, pp. 46-51. 
 
2004

R. Saidur, A.R. Nasrudin, H.H. Masjuki, I.A. Choudhury, T.M.I. Mahlia and M. Husnawan, Development of energy test procedure for household refrigerator-freezers in Malaysia, International Journal of Power and Energy Systems, ACTA press, Canada, Volume 24, #1, 2004, pp. 46-55. 

T.M.I Mahlia, H.H. Masjuki, and. R. Saidur, Cost benefit analysis of implementing minimum energy efficiency standards for household refrigerator- freezers in Malaysia, Energy policy, Elsevier science, 2004, Vol. 32, No. 16, pp. 1819-1824. (ISI/SCOPUS Cited Publication)

T.M.I Mahlia, H.H. Masjuki, and. R. Saidur, Mitigations of emissions through energy efficiency standards for room air conditioners in Malaysia, Energy policy, 2004,Volume 32, Issue 16, Pages 1783-1884. 

B.N. Taufiq, R. Saidur. H.H. Masjuki, T.M.I. Mahlia, M.A. Amalina. Energy Analysis of Zero-Atmospheric Emissions Cooling Zones in Malaysia. The 8th Arab International Solar Energy Conference & Regional World Renewable Energy Congress, 8-10 March, 2004, Bahrain. 
 
2003

H.H. Masjuki, T.M.I. Mahlia, R. Saidur, I.A. Choudhury, and AR. Noor Leha. Projecting electricity savings from implementing minimum energy efficiency standards for household refrigerator in Malaysia, Energy, Vol. 28, No. 7, 2003, pp. 751-754. (IF 0.685) (ISI/SCOPUS Cited Publication)

Saidur R, Masjuki H.H, Mahlia T.M.I, `Impacts of appliance efficiency standards for household appliances in Malaysia , Engineering Transactions, Vol. 6: No. 2 (15) July-December, 2003, pp.134-136. 
 
2002

Saidur. R, Masjuki H.H, Choudhury I.A, The role of ambient temperature, door opening and thermostat setting position and their combined effect on two household refrigerator-freezers energy consumption, Energy conversion and Management, 2002, 43(6), pp. 845 - 854. (IF 1.244) (ISI/SCOPUS Cited Publication)

H.H. Masjuki, T.M.I. Mahlia, I.A. Choudhury, and R. Saidur, Potential CO2 Reduction by Fuel Substitution to Generate Electricity in Malaysia. Energy Conversion and Management, 2002, Vol. 43 (6), pp. 763-770. 

Saidur R, Nasrudin A.R, Masjuki H.H, Mahlia T.M.I, Tamjis M.R, Developing Energy Efficiency Standard and Its Impact on Refrigerator-Freezers in Malaysia, Journal Mekanikal UTM, 2002, No. 14, pp. 63-77. 

Saidur R, Nasrudin. A.R, Masjuki. H.H, Mahlia T.M.I, Effect of usage conditions on refrigerator-freezers energy consumption, Journal Mekanikal UTM, 2002, No 13, pp. 64-74. 

T.M.I Mahlia, H.H. Masjuki, I. A Choudhury and. R. Saidur. Testing and rating non-ducted air conditioners in Malaysia: The applicability of ISO standard 5151. International Journal of Power and Energy Systems, Vol. 2, No. 2, 2002, pp. 80-84 

Saidur R, Nasrudin, A.R, Masjuki HH, Mahlia TMI, Factor affecting refrigerator-freezers energy consumption, ASEAN J. of Science and Technology for development, Vol. 19. No. 2 (2002), pp. 57-67. 
 
2001

Masjuki. H.H, Saidur. R, Ghani. A.K, Choudhury. I.A, Maleque M.A and Mahlia, T.M.I. The Applicability of ISO Household Refrigerator-Freezers Energy Test Specifications in Malaysia, Energy, Elsevier Science, UK, 2001, Vol. 26 (7), pp. 723-737. (ISI/SCOPUS Cited Publication)

TMI Mahlia, H.H. Masjuki, I.A. Choudhury and R. Saidur, Potential CO2 Reduction by Implementing Energy Efficiency Standard for Room Air Conditioner in Malaysia, Energy conversion and Management, 2001, Vol. 42, Issue 14, pp. 1673-1685. 

T.M.I Mahlia, H.H. Masjuki, I. A Choudhury and. R. Saidur, A review on energy efficiency standards and labels: present status and implementation possibilities in Malaysia. ASEAN Journal on Science & Technology for Development, Vol. 18, No. 1, 2001, pp. 71-84 
 
2000

Masjuki. H.H, Mahlia. T.M.I, Saidur. R and Choudhury. I.A, `Applicability of ISO 5151 and ISO 8187 test condition for room air conditioner and household refrigerator in Malaysia , Journal Mekanikal UTM, Vol. II, pp. 1-15, 2000. 
 
Proceeding
 
2013

S.S.Khaleduzzaman, R. Saidur, Jeyraj Selvaraj, I.M. Mahbubul, M.R. Sohel, I.M. Shahrul, Nanofluids for Thermal Performance Improvement in Cooling of Electronic Device, International Conference on Nanoscience and Nanotechnology 2013, 1st to 4th March 2013, Grand Bluewave Hotel, Shah Alam, Malaysia. Paper ID : P44 (Non-ISI/Non-SCOPUS Cited Publication)

I.M. Shahrul, I.M. Mahbubul, R. Saidur, M.F.M. Sabri, M.A. Amalina, Global Effects Of MWCNT-Water Nanofluid In A Shell And Tube Heat Exchanger, International Conference on Nanoscience and Nanotechnology 2013, 1st to 4th March 2013, Grand Bluewave Hotel, Shah Alam, Malaysia. Paper ID: P45 (Non-ISI/Non-SCOPUS Cited Publication)

M.R. Sohel, R. Saidur, Mohd Faizul Mohd Sabri, M.M. Elias and S.S. Khaleduzzaman, Investigation of Heat Transfer Performances of Nanofluids Flow through a Circular Minichannel Heat Sink for Cooling of Electronics. International conference on Nanoscience & Nanotechnology 2013. 1-4 March 2013, Shah Alam, Malaysia. Paper I.D. 41. (Non-ISI/Non-SCOPUS Cited Publication)

Z. Said, M. H. Sajid, A. Kamyar & R. Saidur. 2013. Experimental investigation on the stability and density of TiO2, Al2O3,SiO2 and TiSiO4.4th International Conference on Energy and Environment 2013 (ICEE 2013.Paper ID:ICEE2013-003 (Non-ISI/Non-SCOPUS Cited Publication)

A. Kamyar, I.M. Mahbubul, R. Saidur, M.A. Amalina.Influence of Nanoparticle Type, Size and Weight on Migration Properties of Nanorefrigerant. International Conference on Nanoscience and Nanotechnology 2013, 1st to 4th March 2013, Grand Bluewave Hotel, Shah Alam, Malaysia (Paper ID: P46) (Non-ISI/Non-SCOPUS Cited Publication)

M.A. Khairul, R. Saidur, Altab Hossain, M.A. Alim, I.M. Mahbubul, Heat transfer performance of different nanofluids flows in a helically coiled heat exchanger, International Conference on Nanoscience and Nanotechnology 2013, 1st to 4th March 2013, Grand Bluewave Hotel, Shah Alam, Malaysia. (Non-ISI/Non-SCOPUS Cited Publication)

M.A. Alim, R. Saidur, N.A. Rahim, M.A. Khairul, M.R. Islam, Z. Abdin, Analysis of Heat Transfer Performance of a Flat Plate Solar Collector Using Different Nanofluids,International Conference on Nanoscience and Nanotechnology 2013, 1st to 4th March 2013, Grand Bluewave Hotel, Shah Alam, Malaysia. (Non-ISI/Non-SCOPUS Cited Publication)

M. Faizal, R. Saidur, S.Mekhilef. Potential of Size Reduction of Flat-plate Solar Collectors When Applying Al2O3 Nanofluid. 2013. International Conference on Nanoscience and Nanotechnology 2013 (NANO-SciTech 2013). 1st - 4th March 2013, Grand Bluewave Hotel, Shah Alam, Malaysia. Paper ID: P28. (Non-ISI/Non-SCOPUS Cited Publication)

M.M. Elias, R. Saidur, N.A. Rahim, M.R. Sohel, Performance Investigation of a Plate Heat Exchanger Using Nanofluid with Different Chevron Angle, International Conference on Nanoscience and Nanotechnology 2013, 1st to 4th March 2013, Grand Bluewave Hotel, Shah Alam, Malaysia. (Non-ISI/Non-SCOPUS Cited Publication)
 
2011

K.H. Solangi, T.N.W. Lwin, N.A. Rahim, M.S. Hossain, R. Saidur, H. Fayaz,2011. Development of Solar Energy and Present Policies in Malaysia, The proceeding of the 2011 IEEE first Conference on Clean Energy and Technology (CET 2011), Legend Hotel, Kuala Lumpur, Malaysia, 27 June- June 29,115-120 (SCOPUS-Cited Publication)

H. Fayaz, N.A. Rahim, R. Saidur, K. H. Solangi, H. Niaz, M.S. Hossain,2011. Solar Energy Policy: Malaysia VS Developed Countries, The proceeding of the 2011 IEEE first Conference on Clean Energy and Technology (CET 2011), Legend Hotel, Kuala Lumpur, Malaysia, 27 June- June 29,374-378 (SCOPUS-Cited Publication)

I.M. Mahbubul, R. Saidur and M.A. Amalina, Investigation of viscosity of R123-TiO2 nanorefrigerant, The Proceedings of Regional Tribology Conference, 2011, Langkawi Island, Malaysia, 22 24 November, Paper ID: RTC006, Pages: 1 4. (Non-ISI/Non-SCOPUS Cited Publication)

Hasanuzzaman,M., Saidur,R. & Rahim,N.A.2011. Effectiveness enhancement of heat exchanger by using nanofluids, The proceeding of the 2011 IEEE first Conference on Clean Energy and Technology (CET 2011), Legend Hotel, Kuala Lumpur, Malaysia, 27 June- June 29:pp 98-103 (SCOPUS-Cited Publication)

Abdelaziz Emdeldin Atabani, Saidur Rahman, Arridina Susan Silitonga, Abdi Hanra Sebayang, Energy Economical and Environmental Analysis of Industrial Boilers Using Fuel Switching, Proceeding of the International Conference on Advanced Science, Engineering and Information Technology, 2011 Hotel Equatorial Bangi-Putrajaya, Malaysia, 14 - 15 January 2011 , pp. 501-506. (ISI-Cited Publication)
 
2010

134.R. Saidur, N. A. Rahim and M. Hasanuzzaman, Energy and environmental analysis in industrial boilers and compressors, Proceedings of the International Engineering Conference on Hot Arid Regions (IECHAR 2010), Al-Ahsa, Kingdom of Saudi Arabia, March 1-2, 2010 [ISBN:978-603-08-0083-4]. Pp. 161-166. 

M. Hasanuzzaman, N. A. Rahim and R. Saidur, Analysis of Energy Savings for Rewinding and Replacement of Industrial Motor, the Proceeding of 2010 IEEE International Conference on Power and Energy (PECon 2010), Sunway Resort Hotel and Spa, Kuala Lumpur, Malaysia, 29 November-1 December 2010, pp 141-146. (ISI-Cited Publication)

M. R. Islam, R. Saidur, N. A. Rahim and K. H. Solangi. Assessment and analysis of wind energy potential at mersing, Malaysia, 3rd international conference on science & technology ( ICSTIE), Penang, Malaysia, 16-17 December, 2010, Paper No. 13. (Non-ISI/Non-SCOPUS Cited Publication)

K.H. Solangi, R. Saidur, N.A. Rahim, M.R. Islam, H. Fayaz. Current solar energy policy and potential in Malaysia, 3rd international conference on science & technology (ICSTIE), Penang, Malaysia, 16-17 December, 2010, Paper No. 31. (Non-ISI/Non-SCOPUS Cited Publication)
 
2009

M.J. Hussan, R. Saidur, HH Masjuki, Feasibility of oil-seed produced biodiesel and engine emissions a review, International Conference on Advances in Mechanical Engineering 2009-ICAME 2009, 24-25 June 2009, Shah Alam, Malaysia. 

M.M. Hasan, H.H. Masjuki, A.S.M.A. Haseeb, R. Saidur effects of sputtering parameters on the structural, morphological and optical properties of tungsten oxide thin films Proceedings of Extended Abstract in the 1st AUN/SEEN-Net Regional Conference on Materials 2009, 16-17 February 2009, Equatorial Hotel, Penang, Malaysia, Paper No. C11, pp. 66. 

M. Husnawan, H.H. Masjuki, T.M.I. Mahlia, Saidur R, M.A. Kalam, Performance and Emissions Characterization of Diesel Engine Running With Re- formulated Palm Oil Methyl Ester-Diesel Blended Fuel, 4th International conference on thermal engineering: Theory and Application, Abu Dhabi, UAE, 12-14 January 2009, Paper No:23. 

Saidur. R, M. Husnawan, Masjuki H.H, Jahirul M.I, T.M.I. Mahlia, A.R. Nasruddin, Mekhilef .S, Ping H.W., Zamaluddin M.F, Energy and Electricity Consumption Analysis of Malaysian Industrial Sector, 4th International conference on thermal engineering: Theory and Application, Abu Dhabi, UAE, 12-14 January 2009, Paper No: 58. 
 
2008

Saidur R, Jahirul M.I, Rahim N.A, Masjuki H.H, Mekhilef S, Ping H.W. and Zamaluddin M.F, Energy use and energy audit in industrial sector, Second international conference on industrial energy application, 1-2 April, Sohar University, Sohar, Sultanate of Oman, pp. 164-169, 2008. (Non-ISI/Non-SCOPUS Cited Publication)

Saidur R, and Masjuki H.H, Prediction performance of Artificial neural networks to investigate the Energy consumption of Refrigerator-Freezers, CD Proceedings of international conference on 'Globalization, Energy and Environment', Warsaw School of Economics, Poland. 29-30 May, 2008 (Presented). (Non-ISI/Non-SCOPUS Cited Publication)

Sattar MA, Saidur R, and Masjuki HH,2008. Experimental Investigation on the Performance of Domestic Refrigerator Using Isobutane and Mixture of Propane, Butane and Isobutene, CD proceedings of the 1st International Conference of The Institution of Engineering and Technology, Brunei Darussalam Network, The Rizqun International Hotel, 26-28 May,Paper No. P10. (Non-ISI/Non-SCOPUS Cited Publication)

M.M. Hasan, R. Saidur, A.S.M.A. Haseeb, H.H. Masjuki, Tailoring visible transmittance and optical constants in TiO2 thin films for energy-efficient glass coating, ESF-FWF Conference in Partnership with LFUI Nanotenchnology for sustainable Energy, Obergurgl, Austria, 14-19 June 2008 (Presented) (Non-ISI/Non-SCOPUS Cited Publication)

M.M. Hasan, A.S.M.A. Haseeb, R. Saidur, H.H. Masjuki, Effects of annealing treatment on the optical properties of anatase titanium dioxide thin film, The proceedings of 5th International Conference on Electric Power and Energy Systems, 4-6 July, Holiday Inn, Paris, France, Vol. 30, pp. 221-225, 2008. (Non-ISI/Non-SCOPUS Cited Publication)

Hasanuzzaman, M., Saidur, R. and Masjuki, H.H., Analysis of heat transfer of the refrigerator-freezer, Proceedings of the 4th BSME-ASME International Conference on Thermal Engineering, 27 29 December, 2008, Dhaka, Bangladesh, Technical Session-I (02:00 - 03:30 PM, 27th December 2008, Saturday), Heat Transfer-I, Paper-002. pp 36-41. 

Md. Abdul Wazed, Md. Jahirul Islam, Saidur Rahman, Extraction of fuel from municipality solid wastes, International Graduate Conference on Engineering and Science, 2008, 23-24 December 2008, Johor Bahru, Malaysia 

Wazed M. A., Jahirul M. I., Saidur R. and Hossain M. M., Extraction of fuel from municipality solid wastes, e-Proceeding (ISSN: 1823-3287), International Graduate Conference on Engineering and Science (IGCES), Universiti Teknologi Malaysia (UTM), Skudai, Johor Bahru, Malaysia, 23 -24 December 2008 (Paper ID: 94). 

R. Saidur, M.M. Hasan, M. Hasanuzzaman and H.H. Masjuki, Energy performance of windows for residential building in Malaysia Proceedings of the 2nd International Conference on Science & Technology (ICSTIE 2008), Part 1-Engineering, 12-13 December 2008, University Teknologi Mara, Pulau Pinang, Malaysia, [ISBN 978-983-42204-1-9] pp 805-810. 

R. Saidur, M. Hasanuzzaman, M.A. Sattar and H. H. Masjuki, Investigation of refrigerator-freezer performance using LPG as alternative to R-134a, Proceedings of the International Conference on Environment 2008 (ICENV 2008), Oral Presentations, Renewable Resource & Clean Technology, Parallel Session E-4, 15-17 December 2008, G-Hotel, Penang, Malaysia 

M.M. Hasan, A.S.M.A. Haseeb, R. Saidur, H.H. Masjuki, M.R. Johan, Structural, Optical and Morphological Properties Of TiO2/Ag/TiO2 Multilayer Films Proceedings of Abstract NANO-SciTech 2008 in the International Conference on Nanoscience and Nanotechnology, 18-21 November 2008, UiTM Shah Alam, Malaysia, Paper No. O-083, pp. 87 

M. I. Mahlia; M. Husnawan; H. H. Masjuki, L. Remuslara, R. Saidur. Energy Savings Potential by Substituting Driving With Walking and Cycling for Short Distance. Proceedings of the 2008 International Mechanical Engineering Congress & Exposition, October 31-November 6, Boston, Massachusetts USA, Paper No: IMECE2008-66196. 

R. Saidur, M.A. Sattar, and H. H. Masjuki, Performance of an improved solar car ventilator, The 3rd GMSARN international conference, UChoice hotel, Kunming, China, 12-14 November, 2008, paper no. E15. 

Saidur Rahman, Md. Hasanuzzaman, and Masjuki Hj Hassan, Photovoltain solar energy to oeparate refrigerator, Proceedings of solar energy research and development, pp. 131-136, 2008, 21-22 October, Bangi, Selangor, 2008 

M.M. Hasan, H.H. Masjuki, A.S.M.A. Haseeb, R. Saidur, M. Hamdi, RF reactive sputter deposition of tio2 films at different temperatures: structural, optical and mechanical properties , Proceedings of the First Regional Workshop in the Interdisciplinary Area of Natural Resources/Materials Natural Resources and Materials for Sustainable Development of ASEAN August 18-19, 2008, Phnom Penh, Combodia, pp. 132-139. 

Sattar MA, Masjuki H.H and Saidur R, Pure hydrocarbons as working fluids in vapor compression refrigeration system, CD proceedings of JSME international Chapter and AUN/SEED-NET regional workshop on Mechanical and Aerospace Engineering, Bandung Institute of Technology, Indonesia, 23-24th July, 2008. 

M.M. Hasan, A.S.M.A. Haseeb, R. Saidur , H.H. Masjuki, M. Hamdi, Structural and optical properties of TiO2 films deposited by RFmagnetron sputtering, Presented in the 4th International Conference on Technological Advances of Thin Films & Surface Coatings (Thin Films 2008), 13-16 July, 2008, Singapore. 

Hasanuzzaman, M., Saidur, R. and Masjuki, H.H., Effects of Variables on Energy Consumption of Household Refrigerator-freezer during the Open Door Condition, Proceedings of International Conference of Mechanical and Manufacturing Engineering 2008 (ICME 2008), Paper No. HFT-ID-0132, Heat and Fluid Technology, 21-23 May, Puteri Pacific Johor Bharu Hotel, Johor Bahru, Malaysia [ISBN: 97 98 2963 59 2] 

Hasanuzzaman, M., Saidur, R. and Masjuki, H.H., Effects of Variables on Moisture Transfer of Household Refrigerator-freezer during Open Door Condition, Proceedings of International Conference of Mechanical and Manufacturing Engineering 2008 (ICME 2008), Paper No. HFT-ID-0178, Heat and Fluid Technology, 21-23 May, Puteri Pacific Johor Bharu Hotel, Johor Bahru, Malaysia [ISBN: 97 98 2963 59 2]. 

M.M. Hasan, R. Saidur, A.S.M.A. Haseeb, H.H. Masjuki, Energy Efficient Nano Coatings for Architectural Flat Glass towards Malaysian Low Energy Buildings, Proceedings of the 1st Engineering Conference on Energy & Environment (EnCon2007), December 27-28, 2007, Kuching, Sarawak, Malaysia, pp 289-294. 
 
2007

Sattar MA, Saidur R, Masjuki HH, and Mohiuddin A.K.M., Energy and thermodynamic performance of refrigerator using pure hydrocarbon and mixture of hydrocarbons as refrigerants, Proceedings of the International Conference on Mechanical Engineering 2007 (ICME2007), 29-31 December 2007, Dhaka, Bangladesh, Paper no: ICME07-TH-35. 

M. Hasanuzzaman, R. Saidur, H. H.Masjuki, M. M. Hasan, Environmental effect due to the energy consumption of refrigerator-freezer, Proceedings of the 1st Engineering Conference on Energy & Environment (EnCon2007), December 27-28, 2007, Kuching, Sarawak, Malaysia, pp 343-347 

Saidur. R, Hasanuzzaman. M. and Masjuki H.H, Moisture transfer of household refrigerator-freezer during the closed door condition. Conference on Applications and Design in Mechanical Engineering (CADME07) 26-27 October 2007, Kangar, Perlis, Malaysia. 

Saidur. R, Hasanuzzaman. M. and Masjuki H.H, Energy consumption of household refrigerator-freezer during the closed door condition. Conference on Applications and Design in Mechanical Engineering (CADME07) 26-27 October 2007, Kangar, Perlis, Malaysia. 

Saidur. R, Hasanuzzaman. M, Hasan. M. M. and Masjuki H.H, Energy usage and intensity of commercial building in Malaysia. Conference on Applications and Design in Mechanical Engineering (CADME07) 26-27 October 2007, Kangar, Perlis, Malaysia 

Saidur R, Masjuki H.H, Jamaluddin M.Y, Energy and emissions analysis for household appliances in Malaysia, 22nd Euro conference on operation research, July 8-11, 2007, University of Economics, Prague, Czech Republic (Presented). 

Saidur R, Hasanuzzaman. M, Hasan. M. M. and Masjuki H.H., Overall Thermal Transfer Value (OTTV) and Electricity Use of Residential Building in Malaysia, CD Proceedings of Mechanical and Aerospace Engineering Conference, World Engineering Congress 2007 (WEC07), 5-9 August 2007, Penang, Malaysia, pp 27-35. 

Sattar MA, Saidur R, and Masjuki H.H, Pure Butane and Mixture of Propane, Butane and Isobutane As Refrigerant in Domestic Refrigerator-Freeze, CD Proceedings of Mechanical and Aerospace Engineering Conference, World Engineering Congress 2007 (WEC07), 5-9 August 2007, Penang, Malaysia, pp 220-227. 

Jahirul MI, Saidur R, Masjuki HH, Kalam MA and Tung T, Study of Exhaust Emission on Turbocharged Diesel Engine Using Response Surface Methodology, CD Proceedings of Mechanical and Aerospace Engineering Conference, World Engineering Congress 2007 (WEC07), 5-9 August 2007, Penang, Malaysia, pp 385-395. 

Jahirul MI, Saidur R, Masjuki HH, Rashid MM and Kalam MA, Artificial Neural-Network (ANN) Based Modelling of Dual Fuel Internal Combustion Engine Performance, CD Proceedings of Mechanical and Aerospace Engineering Conference, World Engineering Congress 2007 (WEC07), 5-9 August 2007, Penang, Malaysia, pp 396-405. 

Sattar MA, Saidur R, and Masjuki H.H, Pure Butane as Refrigerant in Domestic Refrigerator-Freezer, Second GMSRN International Conference 2007, Ambassador City Jomtien Hotel, Pattaya, Thailand, 12-14 December, 2007, Paper no Energy 6 (E6). 

Saidur R, Sattar MA, Masjuki HH, Faizul MS, Ozone friendly and environmentally benign refrigerant for domestic refrigerator, UMEXPO, DTC, 26-27, University of Malaya. 

M. A. Sattar, R. Saidur, and H. H. Masjuki, Performance Investigation of Domestic Refrigerator Using Pure Hydrocarbons and Blends of Hydrocarbons as Refrigerants, Proceedings of XXIII International conference on computer, electrical, systems sciences and engineering (CESSE 2007), August 24-26, 2007, Berlin, Germany, pp. 222-227. 

Hasanuzzaman, M., Saidur. R and Masjuki H.H, Heat transfer of household refrigerator-freezer during the closed door condition, Malaysian Science and Technology Congress 2007 (MSTC07), 4 - 6 September 2007, Holiday Villa, Subang, Selangor darul Ehsan, Malaysia, pp 46-53. 

Saidur R, Hasanuzzaman. M, Hasan. M. M. and Masjuki H.H., Overall Thermal Transfer Value (OTTV) and Electricity Use of Residential Building in Malaysia, Proceedings of Mechanical and Aerospace Engineering Conference, World Engineering Congress 2007 (WEC07), 5-9 August 2007, Penang, Malaysia, pp 27-35. 

Sattar MA, Saidur R, and Masjuki H.H, Pure Butane and Mixture of Propane, Butane and Isobutane As Refrigerant in Domestic Refrigerator-Freeze, Proceedings of Mechanical and Aerospace Engineering Conference, World Engineering Congress 2007 (WEC07), 5-9 August 2007, Penang, Malaysia, pp 220-227. 

Jahirul MI, Saidur R, Masjuki HH, Kalam MA and Tung T, Study of Exhaust Emission on Turbocharged Diesel Engine Using Response Surface Methodology, Proceedings of Mechanical and Aerospace Engineering Conference, World Engineering Congress 2007 (WEC07), 5-9 August 2007, Penang, Malaysia, pp 385-395. 

Jahirul MI, Saidur R, Masjuki HH, Rashid MM and Kalam MA, Artificial Neural-Network (ANN) Based Modelling of Dual Fuel Internal Combustion Engine Performance, Proceedings of Mechanical and Aerospace Engineering Conference, World Engineering Congress 2007 (WEC07), 5-9 August 2007, Penang, Malaysia, pp 396-405. 

Sattar MA, Saidur R, and Masjuki H.H, Pure Butane and Mixture of Propane, Butane and Isobutane As Refrigerant in Domestic Refrigerator-Freeze, Sustainable energy research, Australia, Perth, December, 2007, (Presented) 

Hamlaoui Abdesselam, H. H. Masjuki, Messaoud Guellal, Saidur Rahman, Modeling and simulation of a heat pump s hermetic reciprocating compressor using refrigerants R22, propane, propylene and propane/ethane, second international conference on modeling, simulation and applied optimization, March 24 27, 2007, Abu Dhabi, UAE. 
 
2004

H.H. Masjuki, B.N. Taufiq, T.M.I. Mahlia, R. Saidur, M.S. Faizul, E. Niza Muhammad. Second law analysis for optimal thermal design on radial fin geometry by convection. SMIDEX 2004, 9 11 September 2004, PWTC, Kuala Lumpur, Malaysia. 
 
2003

Mahlia TMI, Masjuki HH, Choudhury IA, Alamsyah TMI, Saidur R. (2001). Potential energy conversion from palm oil wastes in Malaysia. Proceedings of International Conference on Integrated Renewable Energy for Regional Development, Bali, Indonesia pp. 1 10. 

B. N. Taufiq, H.H. Masjuki, T.M.I. Mahlia, R. Saidur, M.S. Faizul, M.A. Amalina, Air cooling system for free piston engine, Expo Science & Technology 2003-An exhibition on Science and Technology, hosted by Ministry of science, Technology and the Environment Malaysia, 7-9 August 2003, Kuala Lumpur Malaysia. 

B. N. Taufiq, H.H. Masjuki, T.M.I. Mahlia, R. Saidur, M.S. Faizul, M.A. Amalina, Air cooling system for free piston engine, Research and Development Exposition 2003, organized by Ministry of education Malaysia and Public Institutions of higher learning, 9-12 October 2003, Kuala Lumpur Malaysia. 
 
Others
 
2007

H.H. Masjuki, B.N. Taufiq, A.S.M.A. Haseeb, R. Saidur, M.G. Saifullah. Nanoscience and nanotechnology research activities in the University of Malaya. Proceeding AU/SEED NET Seminar on Nanomaterials and Nanocomposites: Processing and Performance, January 8-9, 2007, Ho Chi Minh City University of Technology, Vietnam, pp. 93-98. 
 
2006

Jahirul I, Saidur R, Masjuki H.H and Kalam MA. `Emission Analysis Of Natural Gas Vehicles (NGV) In Malaysia Proceeding of 4th National Technical Postgraduate Symposium. (Techpos 06) 16-17 May 2006, Crystal Crown Hotel, Petaling Jaya, Malaysia, pp. 37-45. 

H.H. Masjuki, M.A. Kalam, M. Syazly, T.M.I Mahlia., A.H. Rahman, M. Redzuan, M. Varman, R. Saidur, and Y.H. Yau, Experimental Evaluation of an Unmodified Diesel Engine using Biodiesel with Fuel Additive, Proceedings of the first international Forum on Strategic Technology , IFOST 2006, Oct. 18-20, 2006, Korea, pp. 96-99. 

Jahirul I, Saidur R, Rashid MM, Masjuki HH and Kalam MA., Application of artificial neural networks (ANN) in forecasting performance of a duel fuel internal combustion engine, International conference on Modeling and Simulation (MS06), 3-5 April, 2006, Citytel-Mid Valley, Malaysia, pp. 570-579. 

Saidur R , Sattar M.A, Masjuki H.H and Jamaluddin M.Y, Greenhouse Gas Emissions From Domestic Refrigerator, 4th National Technical Postgraduate Symposium, 16-17 May 2006, Crystal Crown Hotel, Petaling Jaya, Malaysia, pp. 28-36. 

Saidur R, Sattar MA, Masjuki H.H, Abdessalam H and Shahruan BS, Energy Utilization Efficiency of Malaysian Utility and Commercial Sectors Using Energy and Exergy Analysis, CD proceedings on international conference on energy and environment, (ICEE, 2006) 28-30th August, 2006, Uniten, Bangi, Selangor, Malaysia, pp. 24-36. 
 
2005

Saidur R, Masjuki H.H and Jamaluddin M.Y, Neural network and its application in energy systems, International conference on recent development in Mechanical and Materials Engineering, ICRAMME 2005, University of Malaya, Kuala Lumpur, Malaysia, May 30-31, 2005, pp1341-1346. 

Saidur R, Leong W.B, Masjuki HH, and , Tamjis MR, Development and validation of emission model for a petrol engine using RSM, International conference on recent development in Mechanical and Materials Engineering, ICRAMME 2005, University of Malaya, Kuala Lumpur, Malaysia, May 30-31, 2005, pp. 1361-1366 

Saidur R, Masjuki H.H, Tamjis MR, and Jamaluddin MY, Degree day analysis for Malaysia, International conference on recent development in Mechanical and Materials Engineering, ICRAMME 2005, University of Malaya, Kuala Lumpur, Malaysia, May 30-31, 2005. pp. 1347-1353. 

Saidur R, Jahirul I, Moutushi TZ, Imtiaz H and Masjuki H.H, Performance investigation of partial substitution of diesel by natural gas for a four cylinder diesel engine, International conference on recent development in Mechanical and Materials Engineering, ICRAMME 2005, University of Malaya, Kuala Lumpur, Malaysia, May 30-31, 2005, 1354-1360. 

Saidur R, Masjuki H.H and Jamaluddin M.Y, and Yap F.C, Usage behaviour and energy performance investigation of washing machines, International conference on recent development in Mechanical and Materials Engineering, ICRAMME 2005, University of Malaya, Kuala Lumpur, Malaysia, May 30-31, 2005, 1367-1372. 
 
2004

Saidur R, Masjuki H.H, Energy efficiency rating refrigerator-freezers, Proceedings of the twelfth conference on Domestic Use of Electrical Energy , 12-13th May, 2004, Somerset West, Western Cape, Cape Town, South Africa, ISBN 0-9584246-2-4, pp. 115-119. 

B.N. Taufiq, H.H. Masjuki, T.M.I. Mahlia, M.S. Faizul, M.A. Amalina, R. Saidur, Exergy analysis of evaporative cooling for reducing energy use in Malaysian building, Advances in Malaysian energy research, 2004, Instituit Tenaga dan Pusat tenega Malaysia, Editors: Kamuruzaman S and Mohd. Yusof Othman, UKM, pp. 143-150. 

B.N. Taufiq, H.H. Masjuki, T.M.I. Mahlia, R. Saidur, M.S. Faizul, The second law analysis of convective-radiating fin geometry, Proceedings of the international mechanical engineering conference , Kuwait, 5-8 December, 2004, pp. 641-649. 

Saidur R, Masjuki H.H, Developing energy test procedure, energy efficiency standards and labels for household refrigerator-freezers, Proceedings of the international mechanical engineering conference , Marriot courtyard Hotel, Kuwait, 5-8 December, 2004, pp. 60-77. 

Saidur R, Chew W.C, and Masjuki HH, Development of refrigerator-freezers energy consumption model, National Conference on Engineering and Technology (NACET2004), University of Malaya, Kuala Lumpur, 26-27th May 2004, pp. 442-449. 

B.N. Taufiq, H.H. Masjuki, T.M.I. Mahlia, R. Saidur, M.S. Faizul, Optimal thermal design of fin geometry in convection based on second law analysis, National Conference on Engineering and Technology (NACET2004), University of Malaya, Kuala Lumpur, 26-27th May 2004, pp.450-459. 

B.N. Taufiq, H.H. Masjuki, T.M.I. Mahlia, M.S. Faizul, R. Saidur, Metselaar H.S.C., M.A. Amalina, Second law analysis for optimal thermal design of radial fin geometry by convection, 3rd National Technical Postgraduate Symposium, Organized by Faculty of Engineering, University of Malaya, 15-16 December, 2004, Armada Hotel, Petaling Jaya, Malaysia, pp. 128-134. 

Saidur.R, Nizam MS, Masjuki H.H, Tamjis MR, Nahrizul AK, and Raha MG, Internal cabinet temperature and usage behavior of domestic refrigerator-freezers in Malaysia, 3rd National Technical Postgraduate Symposium, Organized by Faculty of Engineering, University of Malaya, 15-16 December, 2004, Armada Hotel, Petaling Jaya, Malaysia, pp. 172-184. 
 
2003

Saidur R, Masjuki H.H, Mahlia TMI. A comprehensive Labeling design Effort for household refrigerator-freezers in Malaysia, International conference for energy and environment, 2003, 14-15 Oct, Brack-Libya, pp. 315-324. 

B.N. Taufiq, H.H. Masjuki, T.M.I. mahlia, M.S. Faizul, M.A. Amalina, R. Saidur, Performance of radial convective-radiating fin of rectangular profile, 2nd Postgraduate simposuim (Techpos 2003), Faculty of Engineering, UM, Crystal Crown hotel, December, 2003, Malaysia, pp.203-209. 

R. Saidur, and H.H. Masjuki, Energy Savings And Environmental Prevention Through Energy Efficiency Standard, 2nd Postgraduate simposuim (Techpos 2003), Faculty of Engineering, UM, Crystal Crown hotel, December, 2003, Malaysia, pp. 178-182. 

Roni Hendra, H.H. Masjuki, T.M.I. Mahlia, Amalina, Maleque MD, R. Saidur, Faizul, Henk M, Hamdani, Freezing heat transfer characteristics of phase change materials, 2nd Postgraduate simposuim (Techpos 2003), Faculty of Engineering, UM, Crystal Crown hotel, December, 2003, Malaysia, pp. 218-223. 
 
2002

R. Saidur, A.R. Nasrudin, H.H. Masjuki, M.R. Tamjis, Response surface methodology: an optimization tool in research, 1st postgraduate technical symposium (TechPos, 2002), 16-17 October, Crystal Crown hotel, PJ, 2002, pp. 515-517. 

Mahlia, T.M.I., Masjuki.H.H, Choudhury I.A, and Saidur R, `Energy efficiency standards and labels for room air conditioners in Malaysia: a research summary 1st postgraduate technical symposium (TechPos, 2002), 16-17 October, Crystal Crown hotel, PJ, 2002, pp. 487-497. 

Masjuki Hassan, Saidur Rahman, TMI Mahlia, Amalina Mohd Afifi, Abdul Maleque, and Mohd Faizul Mohd Sabry, Free piston linear engine , IPPP, UM Research Buletin, Vol. 2, No. 4, pp.14-17, 2002. 

R. Saidur, A.R. Nasrudin, H.H. Masjuki, T.M.I. Mahlia, M. R. Tamjis, Development of energy efficiency standard and its impact on refrigerator-freezers energy consumption, Int. conf. on "Domestic Use of Electrical Energy", Cape Teknikom, South Africa, 1-3 April, 2002. 
 
2001

Mahlia TMI, Masjuki HH, Choudhury IA, Alamsyah TMI, Saidur R. (2001). Potential energy conversion from palm oil wastes in Malaysia. Proceedings of International Conference on Integrated Renewable Energy for Regional Development, Bali, Indonesia pp. 1 10. 

I.A. Choudhury, H.H. Masjuki, T.M.I. Mahlia, R. Saidur and A.S Ahmed, Development of energy test procedure, efficiency standards and labels for household appliances in Malaysia, Proceedings of RMK 7 Research seminar, 24-25 April, 2001, University of Malaya, Kuala Lumpur, Malaysia. pp. 79-82. 

H.H. Masjuki, R. Saidur, T.M.I. Mahlia, and A.S. Ahmed "Impacts of energy efficiency standards and labels for household appliances in Malaysia" Presented at Institut Pengajian Tinggi Awam (IPTA' 2001), 25-26 October, PWTC, Kuala Lumpur, Malaysia, pp 487-490. 
 
2000

Saidur. R, Masjuki. H.H, Choudhury. I.A, Jahari. T, `Energy conservation opportunities in household refrigerator in Malaysia , Proceedings of 51st International Appliance Technical Conference (IATC"2000), May 8-10, 2000, University of Kentucky, USA, pp. 153-163. 

Masjuki. H.H, T.M.I. Mahlia, Saidur. R, and Choudhury. I.A, ` Electricity savings potential by implementing energy efficiency standards for household electrical appliances in Malaysia , Proceedings of " World Renewable Energy Congress VI" (WREC 2000), 1-7 July, Brighton: UK, pp. 2606-2609 

Saidur. R, Masjuki. H.H, T.M.I Mahlia, and Choudhury. I.A, Energy consumption comparison of two household refrigerator/freezers and saving comparison through the life cycle cost analysis , Proceedings of the 2nd International Conference on Advances in Strategic Technologies (ICAST 2000), 15-17th August, 2000, Renaissance Palm Garden Hotel, Putra Jaya: Malaysia, pp. 1087-1092 

Mahlia. T.M.I, Masjuki. H.H , Choudhury. I.A, and Saidur. R, Minimum energy efficiency standards for room air conditioners in Malaysia: Estimating electricity savings possibilities , Domestic Use of Electric Energy (DUEE), 18-19 April, Cape Town, South Africa, 2000, web: http://www.ctech.ac.za/conf/techconf/dueee/2000/as2k/abstracts/html#mahlia. 

Masjuki. H.H , Mahlia. T.M.I, Choudhury. I.A, and Saidur. R, Energy efficiency programs for household electrical appliances in Malaysia: a methodology guideline for other developing countries , Domestic Use of Electric Energy (DUEE'2000), 18-19 April, Cape Town, South Africa, 2000 Web address: http://www.ctech.ac.za/conf/techconf/dueee/2000/as2k/abstracts/html#masjuki 

Saidur. R, Msajuki. H.H, Choudhury. I.A, and Mahlia. T.M.I, `Factors effecting the energy consumption of household refrigerator-freezers, Proceedings of TENCON 2000, 25-27th Sep, 2000, Kuala Lumpur, Malaysia, pp. II-92-II-96. 

Choudhury I.A, Mahlia, T.M.I., Masjuki.H.H, and Saidur R. `Performance Analysis of A Split Room Air Conditioner , Proceedings of International Conference on Fluid and Thermal Energy Conversion 2000 , Bandung, Indonesia, July 2 6, 2000, pp. 217-223. 

Mahlia, T.M.I., Masjuki.H.H, Choudhury I.A, and Saidur R, `CO2 reduction potential by implementing efficiency standards for room air conditioner in Malaysia s domestic sector , Proc. Int. Conference on Advances in Strategic Technologies 2000 (ICAST 2000), Malaysia, 15-17th August 2000 , pp. 1313-1323. 

Mahlia, T.M.I., Masjuki.H.H, Choudhury I.A, and Saidur R, `A Literature Review on Energy Efficiency Standards and Labels for Household Electrical Appliances: Implementation Possibilities in Malaysia , Proc. TENCON 2000 (IEEE), 25-27th Sep., 2000, Kuala Lumpur, Malaysia, pp. II103-II107. 
 
1999

Masjuki. H.H, Saidur, R, Choudhury. I.A, Mahlia T.M.I, `Importance of energy efficiency standards and labels for household appliances in Malaysia , Proceedings of 3rd International conference on Domestic Use of Electric Energy (DUEE\"1999), Cap Teknikom, South Africa, March 30- April 1, 1999, pp. 157-162. 

Mahlia. T.M.I, Masjuki. H.H, Choudhury, I.A, Saidur. R, `Energy conservation opportunity for room air conditioners in Malaysia , Proceedings of "World Renewable Energy Congress" (WREC"99), 8-11 June, 1999, Malaysia, pp. 431-435. 

Masjuki. H.H, Mahlia. T.M.I, Saidur. R, and Choudhury. I.A, `Applicability of ISO 5151 and ISO 8187 test condition for room air conditioner and household refrigerator in Malaysia , Proceeding of seminar on Advances in Malaysian energy research 1999 , October 26, 1999, UKM, Malaysia, pp. 147-158. 

AREAS OF RESEARCH
(Project title), (Role), (From)-(Until), (Source), (Level).

Namofluids in enhancing the performance of heat exchangers, Principal Investigator(PI), 2012-2015, HIR

PERFORMANCE INVESTIGATION OF SOLAR-WIND HYBRID SYSTEM FOR MALAYSIAN CLIMATE, Principal Investigator(PI), 02/10/2012, Geran Penyelidikan Universiti Malaya (UMRG) - AET (Innovative Technology (ITRC)), 04/03/2015

INVESTIGATION OF FUNDAMENTAL OPTICAL PROPERTIES OF NANO-FLUIDS, Principal Investigator(PI), 2011-2013, Fundamental Research Grant Scheme (FRGS), National

Heat Transfer Performance Investigation of A Car Radiator Using Nanofluid Based Coolants, Principal Investigator(PI), 2011-2013, ERGS

Design and development of solar powered car ventilator, Principal Investigator(PI), 2007-December, 2008, University of Malaya, University

Energy efficient nano coating to control solar radiation through the glasses of building windows, Principal Investigator(PI), 2007-2009, ScienceFund, National

DEVELOPMENT AND CONVERSION OF A DOMESTIC REFRIGERATOR TO A SOLAR POWERED REFRIGERATOR, Principal Investigator(PI), 2007-2008, University of Malaya, University

Moisture transfer and energy performance of a refrigerator freezer, -, 2006-2007, Internal fund, University

Performance investigation CNG vehicle, -, 2006-2007, Internal fund, University

Performance of hydrocarbon refrigerant, -, 2006-2007, Internal fund, University

Modeling of residential energy consumption, -, 2006-2007, Internal fund, University

Development and performance investigation of hydrocarbons and refrigerants mixture for domestic refrigerator, PROJECT LEADER, 2004-2007, MOSTI, National

An Engineering analysis to identify energy inefficient domestic electrical appliances and setting energy efficiency guidelines for these appliances, Research Assistant, 1998-2001, MOSTI, National

CONSULTATION PROJECT/CONSULTANCY
(Project title), (Role), (From)-(Until), (Organisation).

A DETAILED STUDY ON CONSUMER BEHAVIOUR TOWARDS ELECTRICITY CONSUMPTION AND END USES OF ELECTRICITY IN THE INDUSTRIAL SECTOR, Co-Researcher, 2006-2007, TNB

Energy audit in PNB Damansara, Co-Researcher, 2010-2010, PNB

AWARDS AND RECOGNITIONS
(Name of Award), (Awarding Institution), (Year Awarded), (Level).

Academic Staff With Highest Accumulated Citations (Total citations of 233), 12 Dec, 2011, DTC, University of Malaya., University of Malaya, 2011

Research Award, University of Malaya, 2001

Research award, University of Malaya, 2008, (University)

The World's Most Influential Scientific Minds: 2014, Thomson Reuters, 2014, (University)

PRESENTATIONS
(Title), (Event), (Date Presented), (Organiser), (Level).
 
Pleanary/Keynote Speaker

Industrial Energy Analysis, International Conference On Thermal Energy and Environment, INCOTEE-2011, 24 Mar 2011 to 26 Mar 2011, Kalasalingam University, Tamil Nadu, India, (International)
 
Invited Speaker

A guideline on how to write successful review papers, Journal writing workshop, 30 Nov 2011 to 30 Nov 2011, UTM, (National)
 
Others

ANALYSIS OF FREE AIR COOLING-HEATING WITH THERMAL ENERGY STORAGE, International conference on Future Trends in Structural, Civil, Environmental and Mechanical Engineering, FTSCEM 2013, 13 Jul 2013 to 14 Jul 2013, (International)

SUPERVISION

 
Post Graduate Level
(Name of Degree), (Name of Candidates), (Title of Thesis), (Academic Session)

Completed

Masters Degree, Md. Abdus Sattar, Performance of hydrocarbon as a refrigerant, 2005/2006

Masters Degree, Md. Jahirul Islam, Enegine performance using ANN and RSM, 2004/2005

Masters Degree, Md. Hasanuzzaman, Energy, heat and moisture transfer of a domestic refrigerator, 2005/2006

Doctoral Degree (PhD), Jamal Uddin Ahmed, Thermodynamic performnace of hydrocarbon operated air conditioners, 2008/2009

Masters Degree, Md Rafiqul Islam, Wind Energy mapping, 2008/2009

Doctoral Degree (PhD), Md. Hasanuzzaman, Energy, exergy and environmental analysis of energy intensiv=e equipment in Malaysian industries, 2008/2009

Masters Degree, Ebrahim Taha Elccebadi, Small scale Desalination, 2008/2009

Masters Degree, Yowgeswari Sopiah, Motor energy analysis in malaysian hospital, 2008/2009

Masters Degree, Leong Kin Yuen, Cooling of engine using nanofluids, 2008/2009

Masters Degree, Abdelaziz Emadeldin Abdelaziz, Boiler energy analysis, 2009/2010

Masters Degree, Sree Rama Dasson, Heat Transfer, 2009/2010

Masters Degree, Muhammad Irfan Shahinuddin, Cooling of cement clinker, 2010/2011

Masters Degree, M Bashir Ali, Energy analysis in food industry in Malaysia, 2009/2010

Masters Degree, Mahbubul Islam, Fundamental properties of nano-refrigerant, 2010/2011

Masters Degree, Ali Ijam, Nanofluids as coolants in electronic cooling, 2010/2011

Masters Degree, Mohd Faizal Fauzan, Exergy analysis of hydrogen and gasoline blended engine, 2010/2011

Masters Degree, Fadhilah Binti Shikh Anuar, Thermo physical properties of nano-refrigerant, 2010/2011

Masters Degree, Abdul Rafeq Bin Saleman, Heat transfer improvement using nanofluids, 2010/2011

Masters Degree, Nizamuddin Bin Razali, Heat transfer improvement refrigerator condenser using nanofluids, 2010/2011

Masters Degree, Arivindran A/L Navaretnasinggam, Energy efficiency in pumps, 2010/2011

Masters Degree, Ler Cherk Yong, performance investigation on plate heat exchanger using nanofluid as working fluid, 2010/2011

Masters Degree, Tham Chi Meng, nanofluid to replace conventional working fluid in solar thermal collector, 2010/2011

Masters Degree, Ahmad Kazwini Abd Wahab, Application of solar energy in Malaysia, 2011/2012

Masters Degree, Ghazal Boroumand Jazi, Energy analysis of biomass gasification, 2011/2012

Masters Degree, Letchumanan, Heat Transfer Performance of nanofluid operated chiller, 2011/2012

Masters Degree, Mehdi Rezaei, Solar energy, 2012/2013

Masters Degree, Khalid Hussain Solangi, Solar energy policy and mapping, 2011/2012

Ongoing

Masters Degree, Khalid Hussain Solangi, Solar-wind hybrid design, 2009/2010

Masters Degree, Norridah Amin, Wind Energy policy and Economic analysis, 2009/2010

Doctoral Degree (PhD), Leong Kin Yuen, Nanofluids in heat exchanger, 2010/2011

Doctoral Degree (PhD), Naseer Ali, Eenergy analysis in cement industry, 2010/2011

Doctoral Degree (PhD), Ali W. Abbas Al-Fatlawi, Developing solar economic model, 2010/2011

Masters Degree, Fayez, Solar energy policy and economics, 2010/2011

Doctoral Degree (PhD), Behzad Rismanchi, Thermal Energy management, 2011/2012

Doctoral Degree (PhD), Lee Soon Li, Molecular Dynamic Simulation of Thermal Transport of Nanofluids, 2011/2012

Doctoral Degree (PhD), Pirasteh Gholamreza, Renewable Energy in Industry and Residential sector, 2011/2012

Doctoral Degree (PhD), Ali M. M. Ijam, Nanofluids in solar efficiency improvement, 2011/2012

Doctoral Degree (PhD), Mohd Faizal Fauzan, Solar collector with nanofluids, 2012/2013

Masters Degree, M. Shoukuat Hossain, Performance of solar water heater, 2011/2012

Masters Degree, Mohd Idzuan Mohd Yusuff, Industrial energy efficiency, 2011/2012

Masters Degree, Mahmud Arman Kibria, Exergy analysis of PCM, 2012/2013

Masters Degree, Mahfuz Hasan, Energy storage using PCM, 2012/2013

Masters Degree, Muhammad Anisur Rahman, Energy analysis in PCM, 2012/2013

Masters Degree, Mohammad Sajid Hossain, Optical Properties of nanofluids, 2012/2013

Masters Degree, Zafar Syed, Optical Properties of nanofluids, 2012/2013

Masters Degree, Elias Mollah, Solar collector with nanofluids, 2012/2013

Masters Degree, Sohel Rana, Cooling of electronics using nanofluids, 2012/2013

Masters Degree, Masoud Kamalisarvestani, Energy efficient Nano-coating, 2011/2012

TEACHING
(Course Title), (Academic Session), (No of Student), (No of Contact Hours).


First Degree

Energy management in Building and industry, 2007/2008(1), 44, 42

GENERAL ENGINEERING PRACTICE, 2007/2008(1), 30, 42

INTRODUCTION TO MANUFACTURING TECHNOLOGY, 2007/2008(2), 85, 42

FINAL YEAR THESIS PROJECT I, 2007/2008, 12, 40

FINAL YEAR THESIS PROJECT II, 2007/2008(2), 12, 40

EVALUATION ACTIVITIES
(Description), (Evaluation Activity).

Wong Khee Veai (KGH060004): Fuel economy standard for motorcycles in Malaysia, M.Eng degree. (October, 2008), Thesis

Abdesselam Hamlaoui, PhD candidate, theoretical and experimental study of heat pumps using pure and mixture refrigerants, 2009,, Thesis

Arridinia Susan Silotonga, M.Eng thesis on Techno-economic analysis and environmental impact of implementation of fuel economy standards and labels for passenger cars in Indonesia, April, 2009, Thesis

Journal of Scientific research, Article In Journal

Refree for International Journal of Exergy, Article In Journal

Reviewed an article for the journal of "Chemical Engineering Research and Design" Elsevier., Article In Journal

M.Eng.Sc. Thesis for a candidate Yanti Padil, Thesis

Manuscript ID: es-2010-017762 Manuscript title: Water Use at Pulverized Coal Power Plants with Post-Combustion Carbon Capture and Storage, ACS publication, June, 2010, Article In Journal

Environmental Engineering and Management Journal (An ISI journal), Article In Journal

Editorial Board member, International Journal of Thermal and Environmental Engineering (IJTEE), Published by King Faisal University, KSA, Since July 2010., Article In Journal

Energy & Fuels, Article In Journal

Manuscript Number: ENB-D-10-00599, Journal name: Energy and Buildings (Tier 1 Journal), Article In Journal

Editorial board member, Journal "Innovative Energy Policies, Ashdin Publishing, http://www.ashdin.com/index.aspx, Since September, 2010, Article In Journal

Manuscript Number: APEN-D-10-01266, Title: The scientometric evaluation of the research on the algae and energy, Special Issue on Algal Biofuels, Applied Energy, 2010, Article In Journal

Journal: Nano-Micro Letters (Ref. no.: NML-128, Manuscript Title: Application of Nanofluids in Automobile: comprehensive review of existing data, October, 2010., Article In Journal

Reviewer, Ms. Ref. No.: JEPO-D-10-01440, Title: Optimal Replacement of Residential Air Conditioning Equipment to Minimize Energy, Greenhouse Gas Emissions, and Consumer Cost in the US, Energy Policy, 2010, Article In Journal

Ms. Ref. No.: ATE-2010-968, Title: INVESTIGATION OF HEAT TRANSFER AND FLUID FLOW BEHAVIOR BETWEEN STRAIGHT AND INCLINED FINS IN TALL DUCT, Applied Thermal Engineering, Article In Journal

Ms. Ref. No.: ECM-D-10-00349, Title: Experimental research on a novel cold storage defrost method based on air bypass circulation and electric heater, Energy Conversion and Management, Article In Journal

Manuscript ID gSOL-2010-0158 , International Journal of Sustainable Energy. Taylor and Francis, 2010, Article In Journal

MS: IJEX_20359, Energy and Exergy Analysis of a Supercritical Power Plant, International Journal of Exergy, Inderscience Publisher, 2010., Article In Journal

Regional Tribology Conferency, RTC2011, Article In Proceeding

Editorial board member, Energy Education Science & Technology, Part: A Energy Science and Research, An ISI indexed journal, Article In Journal

HIR Technical evaluation of "Obtaining nanofluid stability by optimizing flow conditions" by Dr Henk, Grant proposal

Energy performance and thermal comfort in air conditioned apartment building by Mohammed W. Muhieldeen, M.Eng. Sc, University Putra Malaysia, August, 2010, Thesis

External examiner for 2 students in Uniten, Thesis

Reviewed a manuscript (ECM-D-11-00377) for Energy Conversion and Management, Article In Journal

Reviewed Ms. Ref. No.: JEPO-D-11-00618 Energy Policy,, Article In Journal

International Conference on Mechanical Engineering and Renewable Energy (ICMERE) 2011, Article In Proceeding

Manuscript Number: ECM-D-11-00361, Energy Conversion and Management, Article In Journal

Reviewed manuscript "Heat Transfer and Flow Characteristics for MHD Mixed Convection in a Lid-Driven Cavity with Heat Generating Obstacle" for International Journal of Energy & Technology, Article In Journal

Revieweed manuscript "Thermal Performance and Pressure Drop Analysis of Nanofluids in Turbulent Forced Convective Flows International Journal of Thermal Sciences", Article In Journal

Reviewer, Regional Tribology Conference 2011 (RTC 2011), Article In Proceeding

Fifth International Conferences on Energy Research and Development, Article In Proceeding

Reviewed Ms. Ref. No.: ENB-D-11-00742, Article In Journal

Journal: Energy & Fuels Manuscript ID : ef-2011-012694 Title : "Characterization of carbonaceous aerosols emitted from outdoor wood boilers", Article In Journal

Reviewed a manuscript for Journal of Zhejiang University-SCIENCE A, Article In Journal

External examiner of a master thesis in IIUM, Thesis

Regional Editor since October, 2011: (1) Journal of Environmental Science and Technology (2) Asian Journal of Industrial Engineering, (3) Research Journal of Nanoscience and Nanotechnology, Article In Journal

International program committee member, The First International Conference on Renewable Energies and Vehicular Technology, 26-28 March, 2012, Tunisia, Article In Proceeding

Books on (1) Vehicle structure and design' by International Islamic University of Malaysia, Nov, 2011, Book

Book on 'Alternate Energy , International Islamic University of Malaysia, Book

Reviewer of a Ms. Ref. No.: MECH-D-11-00369, Mechatronics, Article In Journal

Reviewed Ms. Ref. No.: JEPO-D-11-01704, Article In Journal

Reviewed Ms. Ref. No.: EGY-D-12-00176, Article In Journal

Reviewer of manuscript 539 for Environmental Engineering and Management Journal (ISI journal), 2012., Article In Journal

Reviewer Ms. Ref. No.: HE-D-11-03299, International Journal of Hydrogen Energy, Article In Journal

Reviewer of a manuscript: JEPO-D-11-01557, Article In Journal

Editorial Board member of "Energy and Emission Control Technologies", Article In Journal

Reviewed a manuscript for the Journal of Power Technologies, Article In Journal

African Journal of Agricultural Research, Article In Journal

Reviewed manuscript Ms. Ref. No.: AUTCON-D-11-00085, Energy Conservation Co-operative Control Mechanism Based on Grey Prediction for Structural Air Compressor, Automation in Construction, Article In Journal

Reviewer, Ms. Ref. No.: THESCI-D-12-00019, Title: Numerical Simulation of Laminar Natural Convection Heat Transfer inside an Inclined Solar Collector with V-Corrugated Absorber International Journal of Thermal Sciences, Article In Journal

Reviewed, GCEC-2011-0472,Chemical Engineering Communications, Taylor and Francis, 2012., Article In Journal

Reviewed Ms. Ref. No.: EGY-D-11-02230, Article In Journal

Reviewer, Ref No: M391201202, Engineering Applications of Computational Fluid Mechanics, Article In Journal

Thesis evaluation of an M.Eng.Sc student (Moosavian), Thesis

Reviewed Ref: SM12-58, Article In Journal

open access journal titled Conference Papers in Energy, Article In Journal

Reviewed MS:THESCI-D-12-00019, Article In Journal

Candidate: Nardia Zubir (M.Eng), Thesis

Reviewer of MS: JEPO-D-12-00629, Article In Journal

Reviewer, Forced convective heat transfer of nanofluids - A review of the recent literature, Current nanoscience, http://www.benthamscience.com/cnano/, Article In Journal

Thesis evaluation of an M.Eng student (Siti Nor Hasan), Thesis

Reviewed Ms. Ref. No.: ATE-2012-1991, Article In Journal

reviewer of ms: THESCI-D-12-00465, Article In Journal

Examined thesis of student KGH100008, Thesis

Sciencefund grant proposal for AET Cluster, Grant proposal

Revieweed MS: 2012/BJAST/1528: British Journal of Applied Science & Technology, 2012, Article In Journal

Reviewed MS:IJNM_37444, Article In Journal

Conference Papers in Energy, Article In Journal

Reviewer Ms. Ref. No.: ECM-D-12-00272, Article In Journal

Reviewed MS: IJNM_37444, Article In Journal

Reviewer: Manuscript ID ceat.201200211 for Chemical Engineering & Technology., Article In Journal

reviewer: JMER-12-024, Article In Journal

Examined thesis by Siti Azura (M.Eng), Thesis

Examined PhD thesis by Ong Hwai Chyuan, Thesis

Reviewed MS: IJEX_39681, Article In Journal

Reviewed MS: APEN-D-12-01458, Article In Journal

Examiner for candidature defense, Thesis

Reviewed Manuscript Number: HMT-D-12-01117, Article In Journal

Reviewed MS:IJGE-2012-0366, Article In Journal

Reviewer, Ms. Ref. No.: BITE-D-12-02905R1, Article In Journal

Ms. Ref. No.: IJEPES-D-10-00287, Article In Journal

Sciencefund Assessor for AET Cluster, Sciencefund grant proposal

Reviewer: Reference book Conjugated Heat and Mass Transfer in Ducts of Heat and Mass Exchangers By Elsevier, 2012., Book

International committee member for the 3rd International Conference on Sustainable Energy Information Technology (SEIT), June 25-28, 2013 in Halifax, Nova Scotia, Canada, Article In Proceeding

Examined M.Eng.Sc. thesis of Abdul Khaliq Rasheed (IIUM), Thesis

Reviewer: Ms. Ref. No.: JEPO-D-12-01380, Article In Journal

REVIEWED Ms. Ref. No.: amm 13755, Article In Journal

Ms. Ref. No.: RSER-D-12-00847, Article In Journal

as attached, Article In Journal

Reviewed one article for PLOSE One, Article In Journal

Reviewer: Ms. Ref. No.: amm 13755, Article In Journal

Reviewer: Ms. Ref. No.: RECYCL-D-12-00514, Article In Journal

Reviewed Manuscript ID : ef-2012-019244, Article In Journal

Reviewed Ms. Ref. No.: ETFS-D-12-00451, Article In Journal

Reviewer: Ms. Ref. No.: EGY-D-12-01718, Article In Journal

Title: Energy-Exergy Efficiencies and Environmental Effects of a Mixed Fuel (Solid+Gas) Industrial Facility Steam Boiler, Authors: D. Kaya, M. Eyidogan, M. Ozkaymak, F. Turhan, E. Kilinc, E. Kayabasi, Z. Sahin, E. Sonverdi and S.Selimli, Institute of Energy Journal, UK. 2012, Article In Journal

Internal examiner for a student Azadeh Ghadimi, Thesis

International Journal of Mechanical and Materials Engineering, IJMME, Article In Journal

Engineering e Transaction, Article In Journal

Energy Policy, Article In Journal

Journal of Engineering, Article In Journal

Research Methodology Assessor, research methodology

Journal of Applied Sciences, Article In Journal

Aizura Awang Bakar (M.Eng.Sc), Thesis

Azadeh Safari (M.Eng.), Thesis

African Journal of Food Science, Article In Journal

CONTRIBUTION TO SOCIETY
(Contribution To Society), (Level), (Start Date), (End Date).

Working group member for refrigerator, (Local), 03-May-02 until 06-May-05

Member for SIRIM technical committee, (Local), 17-May-02 until 14-May-09

Reviewer for Energy, Energy Conversion and Management, Energy and Fuel, Journal of power and Energy, (International), 05-May-05 until 30-May-08

Reviewer IEM journal, Journal of Industrial technology, (Local), 09-May-02 until 08-May-08

Reviewer ASEAN journal of science and technology for development, (International), 10-May-02 until 11-May-05

Facilitator for manuscript evaluation, invited by Energy Research Alliance, UTM, (National), 25-Dec-11 until 27-Dec-11

Sharing expertise with Energy Policy Research Institute of UNITEN, (National), 23-Feb-12 until 23-Feb-12

Expected to participate the launching of MyCite and International Conference on Journaf Citation Systems in Asia Pacific Countries, 22 May 2Ot2, Pan Pacific KLIA,Sepang, Malaysia, (National), 22-May-12 until 22-May-12

FACILITATOR FOR JOURNAL PUBLICATION WORKSHOP IN UTM, (National), 06-Nov-12 until 07-Nov-12

A talk on how to be a successful researcher, (University), 17-Jul-12 until 17-Jul-12

Working group member for furniture, (National), 01-Jan-12 until 31-Jul-12